V4L/DVB (5829): Firmware extract and loading for opera dvb-usb update

Better way of creating and loading the firmware used.
Update for get_dvb_firmware script to extract the files for opera usb-box
Help file for creating the firmware added

Signed-off-by: Marco Gittler <g.marco@freenet.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

3 files changed, 97 insertions, 8 deletions

diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index e32f79e05c85..b4d306ae9234 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -24,7 +24,8 @@ use IO::Handle;
 @components = ( "sp8870", "sp887x", "tda10045", "tda10046",
 		"tda10046lifeview", "av7110", "dec2000t", "dec2540t",
 		"dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
-		"or51211", "or51132_qam", "or51132_vsb", "bluebird");
+		"or51211", "or51132_qam", "or51132_vsb", "bluebird",
+		"opera1");
 
 # Check args
 syntax() if (scalar(@ARGV) != 1);
@@ -210,6 +211,45 @@ sub dec3000s {
 
     $outfile;
 }
+sub opera1{
+	my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 0);
+
+	checkstandard();
+	my $fwfile1="dvb-usb-opera1-fpga-01.fw";
+	my $fwfile2="dvb-usb-opera-01.fw";
+	extract("2830SCap2.sys", 0x62e8, 55024, "$tmpdir/opera1-fpga.fw");
+	extract("2830SLoad2.sys",0x3178,0x3685-0x3178,"$tmpdir/fw1part1");
+	extract("2830SLoad2.sys",0x0980,0x3150-0x0980,"$tmpdir/fw1part2");
+	delzero("$tmpdir/fw1part1","$tmpdir/fw1part1-1");
+	delzero("$tmpdir/fw1part2","$tmpdir/fw1part2-1");
+	verify("$tmpdir/fw1part1-1","5e0909858fdf0b5b09ad48b9fe622e70");
+	verify("$tmpdir/fw1part2-1","d6e146f321427e931df2c6fcadac37a1");
+	verify("$tmpdir/opera1-fpga.fw","0f8133f5e9051f5f3c1928f7e5a1b07d");
+
+	my $RES1="\x01\x92\x7f\x00\x01\x00";
+	my $RES0="\x01\x92\x7f\x00\x00\x00";
+	my $DAT1="\x01\x00\xe6\x00\x01\x00";
+	my $DAT0="\x01\x00\xe6\x00\x00\x00";
+	open FW,">$tmpdir/opera.fw";
+	print FW "$RES1";
+	print FW "$DAT1";
+	print FW "$RES1";
+	print FW "$DAT1";
+	appendfile(FW,"$tmpdir/fw1part1-1");
+	print FW "$RES0";
+	print FW "$DAT0";
+	print FW "$RES1";
+	print FW "$DAT1";
+	appendfile(FW,"$tmpdir/fw1part2-1");
+	print FW "$RES1";
+	print FW "$DAT1";
+	print FW "$RES0";
+	print FW "$DAT0";
+	copy ("$tmpdir/opera1-fpga.fw",$fwfile1);
+	copy ("$tmpdir/opera.fw",$fwfile2);
+
+	$fwfile1.",".$fwfile2;
+}
 
 sub vp7041 {
     my $sourcefile = "2.422.zip";
@@ -440,6 +480,25 @@ sub appendfile {
     close(INFILE);
 }
 
+sub delzero{
+	my ($infile,$outfile) =@_;
+
+	open INFILE,"<$infile";
+	open OUTFILE,">$outfile";
+	while (1){
+		$rcount=sysread(INFILE,$buf,22);
+		$len=ord(substr($buf,0,1));
+		print OUTFILE substr($buf,0,1);
+		print OUTFILE substr($buf,2,$len+3);
+	last if ($rcount<1);
+	printf OUTFILE "%c",0;
+#print $len." ".length($buf)."\n";
+
+	}
+	close(INFILE);
+	close(OUTFILE);
+}
+
 sub syntax() {
     print STDERR "syntax: get_dvb_firmware <component>\n";
     print STDERR "Supported components:\n";
diff --git a/Documentation/dvb/opera-firmware.txt b/Documentation/dvb/opera-firmware.txt
new file mode 100644
index 000000000000..93e784c2607b
--- /dev/null
+++ b/Documentation/dvb/opera-firmware.txt
@@ -0,0 +1,27 @@
+To extract the firmware for the Opera DVB-S1 USB-Box
+you need to copy the files:
+
+2830SCap2.sys
+2830SLoad2.sys
+
+from the windriver disk into this directory.
+
+Then run
+
+./get_dvb_firware opera1
+
+and after that you have 2 files:
+
+dvb-usb-opera-01.fw
+dvb-usb-opera1-fpga-01.fw
+
+in here.
+
+Copy them into /lib/firmware/ .
+
+After that the driver can load the firmware
+(if you have enabled firmware loading
+in kernel config and have hotplug running).
+
+
+Marco Gittler <g.marco@freenet.de>
\ No newline at end of file
diff --git a/drivers/media/dvb/dvb-usb/opera1.c b/drivers/media/dvb/dvb-usb/opera1.c
index cdb02218ca6a..d7c04951ceab 100644
--- a/drivers/media/dvb/dvb-usb/opera1.c
+++ b/drivers/media/dvb/dvb-usb/opera1.c
@@ -435,9 +435,9 @@ static int opera1_xilinx_load_firmware(struct usb_device *dev,
 {
 	const struct firmware *fw = NULL;
 	u8 *b, *p;
-	int ret = 0, i;
+	int ret = 0, i,fpgasize=40;
 	u8 testval;
-	info("start downloading fpga firmware");
+	info("start downloading fpga firmware %s",filename);
 
 	if ((ret = request_firmware(&fw, filename, &dev->dev)) != 0) {
 		err("did not find the firmware file. (%s) "
@@ -454,17 +454,20 @@ static int opera1_xilinx_load_firmware(struct usb_device *dev,
 			/* clear fpga ? */
 			opera1_xilinx_rw(dev, 0xbc, 0xaa, &fpga_command, 1,
 					 OPERA_WRITE_MSG);
-			for (i = 0; p[i] != 0 && i < fw->size;) {
+			for (i = 0; i < fw->size;) {
+				if ( (fw->size - i) <fpgasize){
+				    fpgasize=fw->size-i;
+				}
 				b = (u8 *) p + i;
 				if (opera1_xilinx_rw
-					(dev, OPERA_WRITE_FX2, 0x0, b + 1, b[0],
-						OPERA_WRITE_MSG) != b[0]
+					(dev, OPERA_WRITE_FX2, 0x0, b , fpgasize,
+						OPERA_WRITE_MSG) != fpgasize
 					) {
 					err("error while transferring firmware");
 					ret = -EINVAL;
 					break;
 				}
-				i = i + 1 + b[0];
+				i = i + fpgasize;
 			}
 			/* restart the CPU */
 			if (ret || opera1_xilinx_rw
@@ -538,7 +541,7 @@ static int opera1_probe(struct usb_interface *intf,
 
 	if (udev->descriptor.idProduct == USB_PID_OPERA1_WARM &&
 		udev->descriptor.idVendor == USB_VID_OPERA1 &&
-		opera1_xilinx_load_firmware(udev, "dvb-usb-opera1-fpga.fw") != 0
+		opera1_xilinx_load_firmware(udev, "dvb-usb-opera1-fpga-01.fw") != 0
 	    ) {
 		return -EINVAL;
 	}