[media] rc-core: convert winbond-cir

Move winbond-cir from drivers/input/misc/ into drivers/media/rc/
and convert it to use rc-core.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

5 files changed, 123 insertions, 800 deletions

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index b99b8cbde02f..c1a81bcdb319 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -294,24 +294,6 @@ config INPUT_SGI_BTNS
 	  To compile this driver as a module, choose M here: the
 	  module will be called sgi_btns.
 
-config INPUT_WINBOND_CIR
-	tristate "Winbond IR remote control"
-	depends on X86 && PNP
-	select NEW_LEDS
-	select LEDS_CLASS
-	select LEDS_TRIGGERS
-	select BITREVERSE
-	help
-	  Say Y here if you want to use the IR remote functionality found
-	  in some Winbond SuperI/O chips. Currently only the WPCD376I
-	  chip is supported (included in some Intel Media series motherboards).
-
-	  IR Receive and wake-on-IR from suspend and power-off is currently
-	  supported.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called winbond_cir.
-
 config HP_SDC_RTC
 	tristate "HP SDC Real Time Clock"
 	depends on (GSC || HP300) && SERIO
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 1fe1f6c8b737..06b2b5154038 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -38,7 +38,6 @@ obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
 obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON)	+= twl4030-pwrbutton.o
 obj-$(CONFIG_INPUT_TWL4030_VIBRA)	+= twl4030-vibra.o
 obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
-obj-$(CONFIG_INPUT_WINBOND_CIR)		+= winbond-cir.o
 obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
 obj-$(CONFIG_INPUT_WM831X_ON)		+= wm831x-on.o
 obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index d05003d0995f..2d1546889c9b 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -164,4 +164,21 @@ config IR_STREAMZAP
 	   To compile this driver as a module, choose M here: the
 	   module will be called streamzap.
 
+config IR_WINBOND_CIR
+        tristate "Winbond IR remote control"
+        depends on X86 && PNP
+	depends on IR_CORE
+        select NEW_LEDS
+        select LEDS_CLASS
+        select LEDS_TRIGGERS
+        select BITREVERSE
+	---help---
+           Say Y here if you want to use the IR remote functionality found
+           in some Winbond SuperI/O chips. Currently only the WPCD376I
+           chip is supported (included in some Intel Media series
+	   motherboards).
+
+           To compile this driver as a module, choose M here: the module will
+	   be called winbond_cir.
+
 endif #IR_CORE
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index 1eb24e6bc55c..859c12cc03ff 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -20,3 +20,4 @@ obj-$(CONFIG_IR_MCEUSB) += mceusb.o
 obj-$(CONFIG_IR_NUVOTON) += nuvoton-cir.o
 obj-$(CONFIG_IR_ENE) += ene_ir.o
 obj-$(CONFIG_IR_STREAMZAP) += streamzap.o
+obj-$(CONFIG_IR_WINBOND_CIR) += winbond-cir.o
diff --git a/drivers/input/misc/winbond-cir.c b/drivers/media/rc/winbond-cir.c
index 64f1de7960c6..0ee16ec23bbf 100644
--- a/drivers/input/misc/winbond-cir.c
+++ b/drivers/media/rc/winbond-cir.c
@@ -7,10 +7,10 @@
  *  with minor modifications.
  *
  *  Original Author: David Härdeman <david@hardeman.nu>
- *     Copyright (C) 2009 David Härdeman <david@hardeman.nu>
+ *     Copyright (C) 2009 - 2010 David Härdeman <david@hardeman.nu>
  *
- *  Dedicated to Matilda, my newborn daughter, without whose loving attention
- *  this driver would have been finished in half the time and with a fraction
+ *  Dedicated to my daughter Matilda, without whose loving attention this
+ *  driver would have been finished in half the time and with a fraction
  *  of the bugs.
  *
  *  Written using:
@@ -19,15 +19,11 @@
  *    o DSDT dumps
  *
  *  Supported features:
- *    o RC6
  *    o Wake-On-CIR functionality
  *
  *  To do:
- *    o Test NEC and RC5
- *
- *  Left as an exercise for the reader:
- *    o Learning (I have neither the hardware, nor the need)
- *    o IR Transmit (ibid)
+ *    o Learning
+ *    o IR Transmit
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -48,15 +44,13 @@
 #include <linux/pnp.h>
 #include <linux/interrupt.h>
 #include <linux/timer.h>
-#include <linux/input.h>
 #include <linux/leds.h>
-#include <linux/list.h>
 #include <linux/spinlock.h>
 #include <linux/pci_ids.h>
 #include <linux/io.h>
 #include <linux/bitrev.h>
-#include <linux/bitops.h>
 #include <linux/slab.h>
+#include <media/ir-core.h>
 
 #define DRVNAME "winbond-cir"
 
@@ -108,7 +102,7 @@
 #define WBCIR_REG_SP3_IRCR2	0x04 /* Infrared Control 2		*/
 				      /* Bank 6				*/
 #define WBCIR_REG_SP3_IRCR3	0x00 /* Infrared Control 3		*/
-#define WBCIR_REG_SP3_SIR_PW	0x02 /* SIR Pulse Width		*/
+#define WBCIR_REG_SP3_SIR_PW	0x02 /* SIR Pulse Width			*/
 				      /* Bank 7				*/
 #define WBCIR_REG_SP3_IRRXDC	0x00 /* IR RX Demod Control		*/
 #define WBCIR_REG_SP3_IRTXMC	0x01 /* IR TX Mod Control		*/
@@ -153,7 +147,7 @@ enum wbcir_bank {
 	WBCIR_BANK_7          = 0xF4,
 };
 
-/* Supported IR Protocols */
+/* Supported power-on IR Protocols */
 enum wbcir_protocol {
 	IR_PROTOCOL_RC5          = 0x0,
 	IR_PROTOCOL_NEC          = 0x1,
@@ -164,113 +158,35 @@ enum wbcir_protocol {
 #define WBCIR_NAME	"Winbond CIR"
 #define WBCIR_ID_FAMILY          0xF1 /* Family ID for the WPCD376I	*/
 #define	WBCIR_ID_CHIP            0x04 /* Chip ID for the WPCD376I	*/
-#define IR_KEYPRESS_TIMEOUT       250 /* FIXME: should be per-protocol? */
 #define INVALID_SCANCODE   0x7FFFFFFF /* Invalid with all protos	*/
 #define WAKEUP_IOMEM_LEN         0x10 /* Wake-Up I/O Reg Len		*/
 #define EHFUNC_IOMEM_LEN         0x10 /* Enhanced Func I/O Reg Len	*/
 #define SP_IOMEM_LEN             0x08 /* Serial Port 3 (IR) Reg Len	*/
-#define WBCIR_MAX_IDLE_BYTES       10
-
-static DEFINE_SPINLOCK(wbcir_lock);
-static DEFINE_RWLOCK(keytable_lock);
 
-struct wbcir_key {
-	u32 scancode;
-	unsigned int keycode;
-};
-
-struct wbcir_keyentry {
-	struct wbcir_key key;
-	struct list_head list;
-};
-
-static struct wbcir_key rc6_def_keymap[] = {
-	{ 0x800F0400, KEY_NUMERIC_0		},
-	{ 0x800F0401, KEY_NUMERIC_1		},
-	{ 0x800F0402, KEY_NUMERIC_2		},
-	{ 0x800F0403, KEY_NUMERIC_3		},
-	{ 0x800F0404, KEY_NUMERIC_4		},
-	{ 0x800F0405, KEY_NUMERIC_5		},
-	{ 0x800F0406, KEY_NUMERIC_6		},
-	{ 0x800F0407, KEY_NUMERIC_7		},
-	{ 0x800F0408, KEY_NUMERIC_8		},
-	{ 0x800F0409, KEY_NUMERIC_9		},
-	{ 0x800F041D, KEY_NUMERIC_STAR		},
-	{ 0x800F041C, KEY_NUMERIC_POUND		},
-	{ 0x800F0410, KEY_VOLUMEUP		},
-	{ 0x800F0411, KEY_VOLUMEDOWN		},
-	{ 0x800F0412, KEY_CHANNELUP		},
-	{ 0x800F0413, KEY_CHANNELDOWN		},
-	{ 0x800F040E, KEY_MUTE			},
-	{ 0x800F040D, KEY_VENDOR		}, /* Vista Logo Key */
-	{ 0x800F041E, KEY_UP			},
-	{ 0x800F041F, KEY_DOWN			},
-	{ 0x800F0420, KEY_LEFT			},
-	{ 0x800F0421, KEY_RIGHT			},
-	{ 0x800F0422, KEY_OK			},
-	{ 0x800F0423, KEY_ESC			},
-	{ 0x800F040F, KEY_INFO			},
-	{ 0x800F040A, KEY_CLEAR			},
-	{ 0x800F040B, KEY_ENTER			},
-	{ 0x800F045B, KEY_RED			},
-	{ 0x800F045C, KEY_GREEN			},
-	{ 0x800F045D, KEY_YELLOW		},
-	{ 0x800F045E, KEY_BLUE			},
-	{ 0x800F045A, KEY_TEXT			},
-	{ 0x800F0427, KEY_SWITCHVIDEOMODE	},
-	{ 0x800F040C, KEY_POWER			},
-	{ 0x800F0450, KEY_RADIO			},
-	{ 0x800F0448, KEY_PVR			},
-	{ 0x800F0447, KEY_AUDIO			},
-	{ 0x800F0426, KEY_EPG			},
-	{ 0x800F0449, KEY_CAMERA		},
-	{ 0x800F0425, KEY_TV			},
-	{ 0x800F044A, KEY_VIDEO			},
-	{ 0x800F0424, KEY_DVD			},
-	{ 0x800F0416, KEY_PLAY			},
-	{ 0x800F0418, KEY_PAUSE			},
-	{ 0x800F0419, KEY_STOP			},
-	{ 0x800F0414, KEY_FASTFORWARD		},
-	{ 0x800F041A, KEY_NEXT			},
-	{ 0x800F041B, KEY_PREVIOUS		},
-	{ 0x800F0415, KEY_REWIND		},
-	{ 0x800F0417, KEY_RECORD		},
-};
-
-/* Registers and other state is protected by wbcir_lock */
+/* Per-device data */
 struct wbcir_data {
+	spinlock_t spinlock;
+
 	unsigned long wbase;        /* Wake-Up Baseaddr		*/
 	unsigned long ebase;        /* Enhanced Func. Baseaddr	*/
 	unsigned long sbase;        /* Serial Port Baseaddr	*/
 	unsigned int  irq;          /* Serial Port IRQ		*/
 
-	struct input_dev *input_dev;
-	struct timer_list timer_keyup;
+	struct rc_dev *dev;
+
 	struct led_trigger *rxtrigger;
 	struct led_trigger *txtrigger;
 	struct led_classdev led;
 
-	u32 last_scancode;
-	unsigned int last_keycode;
-	u8 last_toggle;
-	u8 keypressed;
-	unsigned long keyup_jiffies;
-	unsigned int idle_count;
-
-	/* RX irdata and parsing state */
-	unsigned long irdata[30];
-	unsigned int irdata_count;
-	unsigned int irdata_idle;
-	unsigned int irdata_off;
-	unsigned int irdata_error;
-
-	/* Protected by keytable_lock */
-	struct list_head keytable;
+	/* RX irdata state */
+	bool irdata_active;
+	bool irdata_error;
+	struct ir_raw_event ev;
 };
 
 static enum wbcir_protocol protocol = IR_PROTOCOL_RC6;
 module_param(protocol, uint, 0444);
-MODULE_PARM_DESC(protocol, "IR protocol to use "
+MODULE_PARM_DESC(protocol, "IR protocol to use for the power-on command "
 		 "(0 = RC5, 1 = NEC, 2 = RC6A, default)");
 
 static int invert; /* default = 0 */
@@ -327,7 +243,7 @@ wbcir_led_brightness_get(struct led_classdev *led_cdev)
 
 static void
 wbcir_led_brightness_set(struct led_classdev *led_cdev,
-			    enum led_brightness brightness)
+			 enum led_brightness brightness)
 {
 	struct wbcir_data *data = container_of(led_cdev,
 					       struct wbcir_data,
@@ -338,7 +254,7 @@ wbcir_led_brightness_set(struct led_classdev *led_cdev,
 		       WBCIR_LED_ENABLE);
 }
 
-/* Manchester encodes bits to RC6 message cells (see wbcir_parse_rc6) */
+/* Manchester encodes bits to RC6 message cells (see wbcir_shutdown) */
 static u8
 wbcir_to_rc6cells(u8 val)
 {
@@ -357,579 +273,6 @@ wbcir_to_rc6cells(u8 val)
 	return coded;
 }
 
-
-
-/*****************************************************************************
- *
- * INPUT FUNCTIONS
- *
- *****************************************************************************/
-
-static unsigned int
-wbcir_do_getkeycode(struct wbcir_data *data, u32 scancode)
-{
-	struct wbcir_keyentry *keyentry;
-	unsigned int keycode = KEY_RESERVED;
-	unsigned long flags;
-
-	read_lock_irqsave(&keytable_lock, flags);
-
-	list_for_each_entry(keyentry, &data->keytable, list) {
-		if (keyentry->key.scancode == scancode) {
-			keycode = keyentry->key.keycode;
-			break;
-		}
-	}
-
-	read_unlock_irqrestore(&keytable_lock, flags);
-	return keycode;
-}
-
-static int
-wbcir_getkeycode(struct input_dev *dev,
-		 unsigned int scancode, unsigned int *keycode)
-{
-	struct wbcir_data *data = input_get_drvdata(dev);
-
-	*keycode = wbcir_do_getkeycode(data, scancode);
-	return 0;
-}
-
-static int
-wbcir_setkeycode(struct input_dev *dev,
-		 unsigned int scancode, unsigned int keycode)
-{
-	struct wbcir_data *data = input_get_drvdata(dev);
-	struct wbcir_keyentry *keyentry;
-	struct wbcir_keyentry *new_keyentry;
-	unsigned long flags;
-	unsigned int old_keycode = KEY_RESERVED;
-
-	new_keyentry = kmalloc(sizeof(*new_keyentry), GFP_KERNEL);
-	if (!new_keyentry)
-		return -ENOMEM;
-
-	write_lock_irqsave(&keytable_lock, flags);
-
-	list_for_each_entry(keyentry, &data->keytable, list) {
-		if (keyentry->key.scancode != scancode)
-			continue;
-
-		old_keycode = keyentry->key.keycode;
-		keyentry->key.keycode = keycode;
-
-		if (keyentry->key.keycode == KEY_RESERVED) {
-			list_del(&keyentry->list);
-			kfree(keyentry);
-		}
-
-		break;
-	}
-
-	set_bit(keycode, dev->keybit);
-
-	if (old_keycode == KEY_RESERVED) {
-		new_keyentry->key.scancode = scancode;
-		new_keyentry->key.keycode = keycode;
-		list_add(&new_keyentry->list, &data->keytable);
-	} else {
-		kfree(new_keyentry);
-		clear_bit(old_keycode, dev->keybit);
-		list_for_each_entry(keyentry, &data->keytable, list) {
-			if (keyentry->key.keycode == old_keycode) {
-				set_bit(old_keycode, dev->keybit);
-				break;
-			}
-		}
-	}
-
-	write_unlock_irqrestore(&keytable_lock, flags);
-	return 0;
-}
-
-/*
- * Timer function to report keyup event some time after keydown is
- * reported by the ISR.
- */
-static void
-wbcir_keyup(unsigned long cookie)
-{
-	struct wbcir_data *data = (struct wbcir_data *)cookie;
-	unsigned long flags;
-
-	/*
-	 * data->keyup_jiffies is used to prevent a race condition if a
-	 * hardware interrupt occurs at this point and the keyup timer
-	 * event is moved further into the future as a result.
-	 *
-	 * The timer will then be reactivated and this function called
-	 * again in the future. We need to exit gracefully in that case
-	 * to allow the input subsystem to do its auto-repeat magic or
-	 * a keyup event might follow immediately after the keydown.
-	 */
-
-	spin_lock_irqsave(&wbcir_lock, flags);
-
-	if (time_is_after_eq_jiffies(data->keyup_jiffies) && data->keypressed) {
-		data->keypressed = 0;
-		led_trigger_event(data->rxtrigger, LED_OFF);
-		input_report_key(data->input_dev, data->last_keycode, 0);
-		input_sync(data->input_dev);
-	}
-
-	spin_unlock_irqrestore(&wbcir_lock, flags);
-}
-
-static void
-wbcir_keydown(struct wbcir_data *data, u32 scancode, u8 toggle)
-{
-	unsigned int keycode;
-
-	/* Repeat? */
-	if (data->last_scancode == scancode &&
-	    data->last_toggle == toggle &&
-	    data->keypressed)
-		goto set_timer;
-	data->last_scancode = scancode;
-
-	/* Do we need to release an old keypress? */
-	if (data->keypressed) {
-		input_report_key(data->input_dev, data->last_keycode, 0);
-		input_sync(data->input_dev);
-		data->keypressed = 0;
-	}
-
-	/* Report scancode */
-	input_event(data->input_dev, EV_MSC, MSC_SCAN, (int)scancode);
-
-	/* Do we know this scancode? */
-	keycode = wbcir_do_getkeycode(data, scancode);
-	if (keycode == KEY_RESERVED)
-		goto set_timer;
-
-	/* Register a keypress */
-	input_report_key(data->input_dev, keycode, 1);
-	data->keypressed = 1;
-	data->last_keycode = keycode;
-	data->last_toggle = toggle;
-
-set_timer:
-	input_sync(data->input_dev);
-	led_trigger_event(data->rxtrigger,
-			  data->keypressed ? LED_FULL : LED_OFF);
-	data->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
-	mod_timer(&data->timer_keyup, data->keyup_jiffies);
-}
-
-
-
-/*****************************************************************************
- *
- * IR PARSING FUNCTIONS
- *
- *****************************************************************************/
-
-/* Resets all irdata */
-static void
-wbcir_reset_irdata(struct wbcir_data *data)
-{
-	memset(data->irdata, 0, sizeof(data->irdata));
-	data->irdata_count = 0;
-	data->irdata_off = 0;
-	data->irdata_error = 0;
-	data->idle_count = 0;
-}
-
-/* Adds one bit of irdata */
-static void
-add_irdata_bit(struct wbcir_data *data, int set)
-{
-	if (data->irdata_count >= sizeof(data->irdata) * 8) {
-		data->irdata_error = 1;
-		return;
-	}
-
-	if (set)
-		__set_bit(data->irdata_count, data->irdata);
-	data->irdata_count++;
-}
-
-/* Gets count bits of irdata */
-static u16
-get_bits(struct wbcir_data *data, int count)
-{
-	u16 val = 0x0;
-
-	if (data->irdata_count - data->irdata_off < count) {
-		data->irdata_error = 1;
-		return 0x0;
-	}
-
-	while (count > 0) {
-		val <<= 1;
-		if (test_bit(data->irdata_off, data->irdata))
-			val |= 0x1;
-		count--;
-		data->irdata_off++;
-	}
-
-	return val;
-}
-
-/* Reads 16 cells and converts them to a byte */
-static u8
-wbcir_rc6cells_to_byte(struct wbcir_data *data)
-{
-	u16 raw = get_bits(data, 16);
-	u8 val = 0x00;
-	int bit;
-
-	for (bit = 0; bit < 8; bit++) {
-		switch (raw & 0x03) {
-		case 0x01:
-			break;
-		case 0x02:
-			val |= (0x01 << bit);
-			break;
-		default:
-			data->irdata_error = 1;
-			break;
-		}
-		raw >>= 2;
-	}
-
-	return val;
-}
-
-/* Decodes a number of bits from raw RC5 data */
-static u8
-wbcir_get_rc5bits(struct wbcir_data *data, unsigned int count)
-{
-	u16 raw = get_bits(data, count * 2);
-	u8 val = 0x00;
-	int bit;
-
-	for (bit = 0; bit < count; bit++) {
-		switch (raw & 0x03) {
-		case 0x01:
-			val |= (0x01 << bit);
-			break;
-		case 0x02:
-			break;
-		default:
-			data->irdata_error = 1;
-			break;
-		}
-		raw >>= 2;
-	}
-
-	return val;
-}
-
-static void
-wbcir_parse_rc6(struct device *dev, struct wbcir_data *data)
-{
-	/*
-	 * Normal bits are manchester coded as follows:
-	 * cell0 + cell1 = logic "0"
-	 * cell1 + cell0 = logic "1"
-	 *
-	 * The IR pulse has the following components:
-	 *
-	 * Leader		- 6 * cell1 - discarded
-	 * Gap    		- 2 * cell0 - discarded
-	 * Start bit		- Normal Coding - always "1"
-	 * Mode Bit 2 - 0	- Normal Coding
-	 * Toggle bit		- Normal Coding with double bit time,
-	 *			  e.g. cell0 + cell0 + cell1 + cell1
-	 *			  means logic "0".
-	 *
-	 * The rest depends on the mode, the following modes are known:
-	 *
-	 * MODE 0:
-	 *  Address Bit 7 - 0	- Normal Coding
-	 *  Command Bit 7 - 0	- Normal Coding
-	 *
-	 * MODE 6:
-	 *  The above Toggle Bit is used as a submode bit, 0 = A, 1 = B.
-	 *  Submode B is for pointing devices, only remotes using submode A
-	 *  are supported.
-	 *
-	 *  Customer range bit	- 0 => Customer = 7 bits, 0...127
-	 *                        1 => Customer = 15 bits, 32768...65535
-	 *  Customer Bits	- Normal Coding
-	 *
-	 *  Customer codes are allocated by Philips. The rest of the bits
-	 *  are customer dependent. The following is commonly used (and the
-	 *  only supported config):
-	 *
-	 *  Toggle Bit		- Normal Coding
-	 *  Address Bit 6 - 0	- Normal Coding
-	 *  Command Bit 7 - 0	- Normal Coding
-	 *
-	 * All modes are followed by at least 6 * cell0.
-	 *
-	 * MODE 0 msglen:
-	 *  1 * 2 (start bit) + 3 * 2 (mode) + 2 * 2 (toggle) +
-	 *  8 * 2 (address) + 8 * 2 (command) =
-	 *  44 cells
-	 *
-	 * MODE 6A msglen:
-	 *  1 * 2 (start bit) + 3 * 2 (mode) + 2 * 2 (submode) +
-	 *  1 * 2 (customer range bit) + 7/15 * 2 (customer bits) +
-	 *  1 * 2 (toggle bit) + 7 * 2 (address) + 8 * 2 (command) =
-	 *  60 - 76 cells
-	 */
-	u8 mode;
-	u8 toggle;
-	u16 customer = 0x0;
-	u8 address;
-	u8 command;
-	u32 scancode;
-
-	/* Leader mark */
-	while (get_bits(data, 1) && !data->irdata_error)
-		/* Do nothing */;
-
-	/* Leader space */
-	if (get_bits(data, 1)) {
-		dev_dbg(dev, "RC6 - Invalid leader space\n");
-		return;
-	}
-
-	/* Start bit */
-	if (get_bits(data, 2) != 0x02) {
-		dev_dbg(dev, "RC6 - Invalid start bit\n");
-		return;
-	}
-
-	/* Mode */
-	mode = get_bits(data, 6);
-	switch (mode) {
-	case 0x15: /* 010101 = b000 */
-		mode = 0;
-		break;
-	case 0x29: /* 101001 = b110 */
-		mode = 6;
-		break;
-	default:
-		dev_dbg(dev, "RC6 - Invalid mode\n");
-		return;
-	}
-
-	/* Toggle bit / Submode bit */
-	toggle = get_bits(data, 4);
-	switch (toggle) {
-	case 0x03:
-		toggle = 0;
-		break;
-	case 0x0C:
-		toggle = 1;
-		break;
-	default:
-		dev_dbg(dev, "RC6 - Toggle bit error\n");
-		break;
-	}
-
-	/* Customer */
-	if (mode == 6) {
-		if (toggle != 0) {
-			dev_dbg(dev, "RC6B - Not Supported\n");
-			return;
-		}
-
-		customer = wbcir_rc6cells_to_byte(data);
-
-		if (customer & 0x80) {
-			/* 15 bit customer value */
-			customer <<= 8;
-			customer |= wbcir_rc6cells_to_byte(data);
-		}
-	}
-
-	/* Address */
-	address = wbcir_rc6cells_to_byte(data);
-	if (mode == 6) {
-		toggle = address >> 7;
-		address &= 0x7F;
-	}
-
-	/* Command */
-	command = wbcir_rc6cells_to_byte(data);
-
-	/* Create scancode */
-	scancode =  command;
-	scancode |= address << 8;
-	scancode |= customer << 16;
-
-	/* Last sanity check */
-	if (data->irdata_error) {
-		dev_dbg(dev, "RC6 - Cell error(s)\n");
-		return;
-	}
-
-	dev_dbg(dev, "IR-RC6 ad 0x%02X cm 0x%02X cu 0x%04X "
-		"toggle %u mode %u scan 0x%08X\n",
-		address,
-		command,
-		customer,
-		(unsigned int)toggle,
-		(unsigned int)mode,
-		scancode);
-
-	wbcir_keydown(data, scancode, toggle);
-}
-
-static void
-wbcir_parse_rc5(struct device *dev, struct wbcir_data *data)
-{
-	/*
-	 * Bits are manchester coded as follows:
-	 * cell1 + cell0 = logic "0"
-	 * cell0 + cell1 = logic "1"
-	 * (i.e. the reverse of RC6)
-	 *
-	 * Start bit 1		- "1" - discarded
-	 * Start bit 2		- Must be inverted to get command bit 6
-	 * Toggle bit
-	 * Address Bit 4 - 0
-	 * Command Bit 5 - 0
-	 */
-	u8 toggle;
-	u8 address;
-	u8 command;
-	u32 scancode;
-
-	/* Start bit 1 */
-	if (!get_bits(data, 1)) {
-		dev_dbg(dev, "RC5 - Invalid start bit\n");
-		return;
-	}
-
-	/* Start bit 2 */
-	if (!wbcir_get_rc5bits(data, 1))
-		command = 0x40;
-	else
-		command = 0x00;
-
-	toggle   = wbcir_get_rc5bits(data, 1);
-	address  = wbcir_get_rc5bits(data, 5);
-	command |= wbcir_get_rc5bits(data, 6);
-	scancode = address << 7 | command;
-
-	/* Last sanity check */
-	if (data->irdata_error) {
-		dev_dbg(dev, "RC5 - Invalid message\n");
-		return;
-	}
-
-	dev_dbg(dev, "IR-RC5 ad %u cm %u t %u s %u\n",
-		(unsigned int)address,
-		(unsigned int)command,
-		(unsigned int)toggle,
-		(unsigned int)scancode);
-
-	wbcir_keydown(data, scancode, toggle);
-}
-
-static void
-wbcir_parse_nec(struct device *dev, struct wbcir_data *data)
-{
-	/*
-	 * Each bit represents 560 us.
-	 *
-	 * Leader		- 9 ms burst
-	 * Gap			- 4.5 ms silence
-	 * Address1 bit 0 - 7	- Address 1
-	 * Address2 bit 0 - 7	- Address 2
-	 * Command1 bit 0 - 7	- Command 1
-	 * Command2 bit 0 - 7	- Command 2
-	 *
-	 * Note the bit order!
-	 *
-	 * With the old NEC protocol, Address2 was the inverse of Address1
-	 * and Command2 was the inverse of Command1 and were used as
-	 * an error check.
-	 *
-	 * With NEC extended, Address1 is the LSB of the Address and
-	 * Address2 is the MSB, Command parsing remains unchanged.
-	 *
-	 * A repeat message is coded as:
-	 * Leader		- 9 ms burst
-	 * Gap			- 2.25 ms silence
-	 * Repeat		- 560 us active
-	 */
-	u8 address1;
-	u8 address2;
-	u8 command1;
-	u8 command2;
-	u16 address;
-	u32 scancode;
-
-	/* Leader mark */
-	while (get_bits(data, 1) && !data->irdata_error)
-		/* Do nothing */;
-
-	/* Leader space */
-	if (get_bits(data, 4)) {
-		dev_dbg(dev, "NEC - Invalid leader space\n");
-		return;
-	}
-
-	/* Repeat? */
-	if (get_bits(data, 1)) {
-		if (!data->keypressed) {
-			dev_dbg(dev, "NEC - Stray repeat message\n");
-			return;
-		}
-
-		dev_dbg(dev, "IR-NEC repeat s %u\n",
-			(unsigned int)data->last_scancode);
-
-		wbcir_keydown(data, data->last_scancode, data->last_toggle);
-		return;
-	}
-
-	/* Remaining leader space */
-	if (get_bits(data, 3)) {
-		dev_dbg(dev, "NEC - Invalid leader space\n");
-		return;
-	}
-
-	address1  = bitrev8(get_bits(data, 8));
-	address2  = bitrev8(get_bits(data, 8));
-	command1  = bitrev8(get_bits(data, 8));
-	command2  = bitrev8(get_bits(data, 8));
-
-	/* Sanity check */
-	if (data->irdata_error) {
-		dev_dbg(dev, "NEC - Invalid message\n");
-		return;
-	}
-
-	/* Check command validity */
-	if (command1 != ~command2) {
-		dev_dbg(dev, "NEC - Command bytes mismatch\n");
-		return;
-	}
-
-	/* Check for extended NEC protocol */
-	address = address1;
-	if (address1 != ~address2)
-		address |= address2 << 8;
-
-	scancode = address << 8 | command1;
-
-	dev_dbg(dev, "IR-NEC ad %u cm %u s %u\n",
-		(unsigned int)address,
-		(unsigned int)command1,
-		(unsigned int)scancode);
-
-	wbcir_keydown(data, scancode, !data->last_toggle);
-}
-
-
-
 /*****************************************************************************
  *
  * INTERRUPT FUNCTIONS
@@ -941,75 +284,88 @@ wbcir_irq_handler(int irqno, void *cookie)
 {
 	struct pnp_dev *device = cookie;
 	struct wbcir_data *data = pnp_get_drvdata(device);
-	struct device *dev = &device->dev;
-	u8 status;
 	unsigned long flags;
 	u8 irdata[8];
+	u8 disable = true;
+	u8 status;
 	int i;
-	unsigned int hw;
 
-	spin_lock_irqsave(&wbcir_lock, flags);
+	spin_lock_irqsave(&data->spinlock, flags);
 
 	wbcir_select_bank(data, WBCIR_BANK_0);
 
 	status = inb(data->sbase + WBCIR_REG_SP3_EIR);
 
 	if (!(status & (WBCIR_IRQ_RX | WBCIR_IRQ_ERR))) {
-		spin_unlock_irqrestore(&wbcir_lock, flags);
+		spin_unlock_irqrestore(&data->spinlock, flags);
 		return IRQ_NONE;
 	}
 
-	if (status & WBCIR_IRQ_ERR)
-		data->irdata_error = 1;
+	/* Check for e.g. buffer overflow */
+	if (status & WBCIR_IRQ_ERR) {
+		data->irdata_error = true;
+		ir_raw_event_reset(data->dev);
+	}
 
 	if (!(status & WBCIR_IRQ_RX))
 		goto out;
 
+	if (!data->irdata_active) {
+		data->irdata_active = true;
+		led_trigger_event(data->rxtrigger, LED_FULL);
+	}
+
 	/* Since RXHDLEV is set, at least 8 bytes are in the FIFO */
 	insb(data->sbase + WBCIR_REG_SP3_RXDATA, &irdata[0], 8);
 
-	for (i = 0; i < sizeof(irdata); i++) {
-		hw = hweight8(irdata[i]);
-		if (hw > 4)
-			add_irdata_bit(data, 0);
-		else
-			add_irdata_bit(data, 1);
+	for (i = 0; i < 8; i++) {
+		u8 pulse;
+		u32 duration;
 
-		if (hw == 8)
-			data->idle_count++;
-		else
-			data->idle_count = 0;
+		if (irdata[i] != 0xFF && irdata[i] != 0x00)
+			disable = false;
+
+		if (data->irdata_error)
+			continue;
+
+		pulse = irdata[i] & 0x80 ? false : true;
+		duration = (irdata[i] & 0x7F) * 10000; /* ns */
+
+		if (data->ev.pulse != pulse) {
+			if (data->ev.duration != 0) {
+				ir_raw_event_store(data->dev, &data->ev);
+				data->ev.duration = 0;
+			}
+
+			data->ev.pulse = pulse;
+		}
+
+		data->ev.duration += duration;
 	}
 
-	if (data->idle_count > WBCIR_MAX_IDLE_BYTES) {
-		/* Set RXINACTIVE... */
+	if (disable) {
+		if (data->ev.duration != 0 && !data->irdata_error) {
+			ir_raw_event_store(data->dev, &data->ev);
+			data->ev.duration = 0;
+		}
+
+		/* Set RXINACTIVE */
 		outb(WBCIR_RX_DISABLE, data->sbase + WBCIR_REG_SP3_ASCR);
 
-		/* ...and drain the FIFO */
+		/* Drain the FIFO */
 		while (inb(data->sbase + WBCIR_REG_SP3_LSR) & WBCIR_RX_AVAIL)
 			inb(data->sbase + WBCIR_REG_SP3_RXDATA);
 
-		dev_dbg(dev, "IRDATA:\n");
-		for (i = 0; i < data->irdata_count; i += BITS_PER_LONG)
-			dev_dbg(dev, "0x%08lX\n", data->irdata[i/BITS_PER_LONG]);
-
-		switch (protocol) {
-		case IR_PROTOCOL_RC5:
-			wbcir_parse_rc5(dev, data);
-			break;
-		case IR_PROTOCOL_RC6:
-			wbcir_parse_rc6(dev, data);
-			break;
-		case IR_PROTOCOL_NEC:
-			wbcir_parse_nec(dev, data);
-			break;
-		}
-
-		wbcir_reset_irdata(data);
+		ir_raw_event_reset(data->dev);
+		data->irdata_error = false;
+		data->irdata_active = false;
+		led_trigger_event(data->rxtrigger, LED_OFF);
 	}
 
+	ir_raw_event_handle(data->dev);
+
 out:
-	spin_unlock_irqrestore(&wbcir_lock, flags);
+	spin_unlock_irqrestore(&data->spinlock, flags);
 	return IRQ_HANDLED;
 }
 
@@ -1199,6 +555,10 @@ finish:
 	wbcir_select_bank(data, WBCIR_BANK_0);
 	outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
 
+	/* Disable LED */
+	data->irdata_active = false;
+	led_trigger_event(data->rxtrigger, LED_OFF);
+
 	/*
 	 * ACPI will set the HW disable bit for SP3 which means that the
 	 * output signals are left in an undefined state which may cause
@@ -1323,8 +683,15 @@ wbcir_init_hw(struct wbcir_data *data)
 	/* Clear AUX status bits */
 	outb(0xE0, data->sbase + WBCIR_REG_SP3_ASCR);
 
+	/* Clear IR decoding state */
+	data->irdata_active = false;
+	led_trigger_event(data->rxtrigger, LED_OFF);
+	data->irdata_error = false;
+	data->ev.duration = 0;
+	ir_raw_event_reset(data->dev);
+	ir_raw_event_handle(data->dev);
+
 	/* Enable interrupts */
-	wbcir_reset_irdata(data);
 	outb(WBCIR_IRQ_RX | WBCIR_IRQ_ERR, data->sbase + WBCIR_REG_SP3_IER);
 }
 
@@ -1361,6 +728,7 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id)
 
 	pnp_set_drvdata(device, data);
 
+	spin_lock_init(&data->spinlock);
 	data->ebase = pnp_port_start(device, 0);
 	data->wbase = pnp_port_start(device, 1);
 	data->sbase = pnp_port_start(device, 2);
@@ -1426,43 +794,25 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id)
 	if (err)
 		goto exit_unregister_rxtrigger;
 
-	data->input_dev = input_allocate_device();
-	if (!data->input_dev) {
+	data->dev = rc_allocate_device();
+	if (!data->dev) {
 		err = -ENOMEM;
 		goto exit_unregister_led;
 	}
 
-	data->input_dev->evbit[0] = BIT(EV_KEY);
-	data->input_dev->name = WBCIR_NAME;
-	data->input_dev->phys = "wbcir/cir0";
-	data->input_dev->id.bustype = BUS_HOST;
-	data->input_dev->id.vendor  = PCI_VENDOR_ID_WINBOND;
-	data->input_dev->id.product = WBCIR_ID_FAMILY;
-	data->input_dev->id.version = WBCIR_ID_CHIP;
-	data->input_dev->getkeycode = wbcir_getkeycode;
-	data->input_dev->setkeycode = wbcir_setkeycode;
-	input_set_capability(data->input_dev, EV_MSC, MSC_SCAN);
-	input_set_drvdata(data->input_dev, data);
-
-	err = input_register_device(data->input_dev);
+	data->dev->driver_name = WBCIR_NAME;
+	data->dev->input_name = WBCIR_NAME;
+	data->dev->input_phys = "wbcir/cir0";
+	data->dev->input_id.bustype = BUS_HOST;
+	data->dev->input_id.vendor = PCI_VENDOR_ID_WINBOND;
+	data->dev->input_id.product = WBCIR_ID_FAMILY;
+	data->dev->input_id.version = WBCIR_ID_CHIP;
+	data->dev->priv = data;
+	data->dev->dev.parent = &device->dev;
+
+	err = rc_register_device(data->dev);
 	if (err)
-		goto exit_free_input;
-
-	data->last_scancode = INVALID_SCANCODE;
-	INIT_LIST_HEAD(&data->keytable);
-	setup_timer(&data->timer_keyup, wbcir_keyup, (unsigned long)data);
-
-	/* Load default keymaps */
-	if (protocol == IR_PROTOCOL_RC6) {
-		int i;
-		for (i = 0; i < ARRAY_SIZE(rc6_def_keymap); i++) {
-			err = wbcir_setkeycode(data->input_dev,
-					       (int)rc6_def_keymap[i].scancode,
-					       (int)rc6_def_keymap[i].keycode);
-			if (err)
-				goto exit_unregister_keys;
-		}
-	}
+		goto exit_free_rc;
 
 	device_init_wakeup(&device->dev, 1);
 
@@ -1470,21 +820,8 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id)
 
 	return 0;
 
-exit_unregister_keys:
-	if (!list_empty(&data->keytable)) {
-		struct wbcir_keyentry *key;
-		struct wbcir_keyentry *keytmp;
-
-		list_for_each_entry_safe(key, keytmp, &data->keytable, list) {
-			list_del(&key->list);
-			kfree(key);
-		}
-	}
-	input_unregister_device(data->input_dev);
-	/* Can't call input_free_device on an unregistered device */
-	data->input_dev = NULL;
-exit_free_input:
-	input_free_device(data->input_dev);
+exit_free_rc:
+	rc_free_device(data->dev);
 exit_unregister_led:
 	led_classdev_unregister(&data->led);
 exit_unregister_rxtrigger:
@@ -1510,15 +847,11 @@ static void __devexit
 wbcir_remove(struct pnp_dev *device)
 {
 	struct wbcir_data *data = pnp_get_drvdata(device);
-	struct wbcir_keyentry *key;
-	struct wbcir_keyentry *keytmp;
 
 	/* Disable interrupts */
 	wbcir_select_bank(data, WBCIR_BANK_0);
 	outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
 
-	del_timer_sync(&data->timer_keyup);
-
 	free_irq(data->irq, device);
 
 	/* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */
@@ -1530,8 +863,7 @@ wbcir_remove(struct pnp_dev *device)
 	/* Clear BUFF_EN, END_EN, MATCH_EN */
 	wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07);
 
-	/* This will generate a keyup event if necessary */
-	input_unregister_device(data->input_dev);
+	rc_unregister_device(data->dev);
 
 	led_trigger_unregister_simple(data->rxtrigger);
 	led_trigger_unregister_simple(data->txtrigger);
@@ -1544,11 +876,6 @@ wbcir_remove(struct pnp_dev *device)
 	release_region(data->ebase, EHFUNC_IOMEM_LEN);
 	release_region(data->sbase, SP_IOMEM_LEN);
 
-	list_for_each_entry_safe(key, keytmp, &data->keytable, list) {
-		list_del(&key->list);
-		kfree(key);
-	}
-
 	kfree(data);
 
 	pnp_set_drvdata(device, NULL);
@@ -1581,8 +908,7 @@ wbcir_init(void)
 	case IR_PROTOCOL_RC6:
 		break;
 	default:
-		printk(KERN_ERR DRVNAME ": Invalid protocol argument\n");
-		return -EINVAL;
+		printk(KERN_ERR DRVNAME ": Invalid power-on protocol\n");
 	}
 
 	ret = pnp_register_driver(&wbcir_driver);
@@ -1598,11 +924,9 @@ wbcir_exit(void)
 	pnp_unregister_driver(&wbcir_driver);
 }
 
-MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
-MODULE_DESCRIPTION("Winbond SuperI/O Consumer IR Driver");
-MODULE_LICENSE("GPL");
-
 module_init(wbcir_init);
 module_exit(wbcir_exit);
 
-
+MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
+MODULE_DESCRIPTION("Winbond SuperI/O Consumer IR Driver");
+MODULE_LICENSE("GPL");