Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: queue: bring discard_granularity/alignment into line with SCSI
  mmc: queue: append partition subname to queue thread name
  mmc: core: make erase timeout calculation allow for gated clock
  mmc: block: switch card to User Data Area when removing the block driver
  mmc: sdio: reset card during power_restore
  mmc: cb710: fix #ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
  mmc: sdhi: DMA slave ID 0 is invalid
  mmc: tmio: fix regression in TMIO_MMC_WRPROTECT_DISABLE handling
  mmc: omap_hsmmc: use original sg_len for dma_unmap_sg
  mmc: omap_hsmmc: fix ocr mask usage
  mmc: sdio: fix runtime PM path during driver removal
  mmc: Add PCI fixup quirks for Ricoh 1180:e823 reader
  mmc: sdhi: fix module unloading
  mmc: of_mmc_spi: add NO_IRQ define to of_mmc_spi.c
  mmc: vub300: fix null dereferences in error handling

14 files changed, 74 insertions, 28 deletions

diff --git a/drivers/misc/cb710/sgbuf2.c b/drivers/misc/cb710/sgbuf2.c
index d019746551f3..2a40d0efdff5 100644
--- a/drivers/misc/cb710/sgbuf2.c
+++ b/drivers/misc/cb710/sgbuf2.c
@@ -47,7 +47,7 @@ static uint32_t sg_dwiter_read_buffer(struct sg_mapping_iter *miter)
 
 static inline bool needs_unaligned_copy(const void *ptr)
 {
-#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 	return false;
 #else
 	return ((ptr - NULL) & 3) != 0;
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 71da5641e258..f85e42224559 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -1024,7 +1024,7 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card,
 	INIT_LIST_HEAD(&md->part);
 	md->usage = 1;
 
-	ret = mmc_init_queue(&md->queue, card, &md->lock);
+	ret = mmc_init_queue(&md->queue, card, &md->lock, subname);
 	if (ret)
 		goto err_putdisk;
 
@@ -1297,6 +1297,9 @@ static void mmc_blk_remove(struct mmc_card *card)
 	struct mmc_blk_data *md = mmc_get_drvdata(card);
 
 	mmc_blk_remove_parts(card, md);
+	mmc_claim_host(card->host);
+	mmc_blk_part_switch(card, md);
+	mmc_release_host(card->host);
 	mmc_blk_remove_req(md);
 	mmc_set_drvdata(card, NULL);
 }
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index c07322c2658c..6413afa318d2 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -106,10 +106,12 @@ static void mmc_request(struct request_queue *q)
  * @mq: mmc queue
  * @card: mmc card to attach this queue
  * @lock: queue lock
+ * @subname: partition subname
  *
  * Initialise a MMC card request queue.
  */
-int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock)
+int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
+		   spinlock_t *lock, const char *subname)
 {
 	struct mmc_host *host = card->host;
 	u64 limit = BLK_BOUNCE_HIGH;
@@ -133,12 +135,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
 		mq->queue->limits.max_discard_sectors = UINT_MAX;
 		if (card->erased_byte == 0)
 			mq->queue->limits.discard_zeroes_data = 1;
-		if (!mmc_can_trim(card) && is_power_of_2(card->erase_size)) {
-			mq->queue->limits.discard_granularity =
-							card->erase_size << 9;
-			mq->queue->limits.discard_alignment =
-							card->erase_size << 9;
-		}
+		mq->queue->limits.discard_granularity = card->pref_erase << 9;
 		if (mmc_can_secure_erase_trim(card))
 			queue_flag_set_unlocked(QUEUE_FLAG_SECDISCARD,
 						mq->queue);
@@ -209,8 +206,8 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
 
 	sema_init(&mq->thread_sem, 1);
 
-	mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd/%d",
-		host->index);
+	mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd/%d%s",
+		host->index, subname ? subname : "");
 
 	if (IS_ERR(mq->thread)) {
 		ret = PTR_ERR(mq->thread);
diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h
index 64e66e0d4994..6223ef8dc9cd 100644
--- a/drivers/mmc/card/queue.h
+++ b/drivers/mmc/card/queue.h
@@ -19,7 +19,8 @@ struct mmc_queue {
 	unsigned int		bounce_sg_len;
 };
 
-extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *);
+extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *,
+			  const char *);
 extern void mmc_cleanup_queue(struct mmc_queue *);
 extern void mmc_queue_suspend(struct mmc_queue *);
 extern void mmc_queue_resume(struct mmc_queue *);
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 68091dda3f31..7843efe22359 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1245,7 +1245,7 @@ static unsigned int mmc_mmc_erase_timeout(struct mmc_card *card,
 		 */
 		timeout_clks <<= 1;
 		timeout_us += (timeout_clks * 1000) /
-			      (card->host->ios.clock / 1000);
+			      (mmc_host_clk_rate(card->host) / 1000);
 
 		erase_timeout = timeout_us / 1000;
 
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 4d0c15bfa514..262fff019177 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -691,15 +691,54 @@ static int mmc_sdio_resume(struct mmc_host *host)
 static int mmc_sdio_power_restore(struct mmc_host *host)
 {
 	int ret;
+	u32 ocr;
 
 	BUG_ON(!host);
 	BUG_ON(!host->card);
 
 	mmc_claim_host(host);
+
+	/*
+	 * Reset the card by performing the same steps that are taken by
+	 * mmc_rescan_try_freq() and mmc_attach_sdio() during a "normal" probe.
+	 *
+	 * sdio_reset() is technically not needed. Having just powered up the
+	 * hardware, it should already be in reset state. However, some
+	 * platforms (such as SD8686 on OLPC) do not instantly cut power,
+	 * meaning that a reset is required when restoring power soon after
+	 * powering off. It is harmless in other cases.
+	 *
+	 * The CMD5 reset (mmc_send_io_op_cond()), according to the SDIO spec,
+	 * is not necessary for non-removable cards. However, it is required
+	 * for OLPC SD8686 (which expects a [CMD5,5,3,7] init sequence), and
+	 * harmless in other situations.
+	 *
+	 * With these steps taken, mmc_select_voltage() is also required to
+	 * restore the correct voltage setting of the card.
+	 */
+	sdio_reset(host);
+	mmc_go_idle(host);
+	mmc_send_if_cond(host, host->ocr_avail);
+
+	ret = mmc_send_io_op_cond(host, 0, &ocr);
+	if (ret)
+		goto out;
+
+	if (host->ocr_avail_sdio)
+		host->ocr_avail = host->ocr_avail_sdio;
+
+	host->ocr = mmc_select_voltage(host, ocr & ~0x7F);
+	if (!host->ocr) {
+		ret = -EINVAL;
+		goto out;
+	}
+
 	ret = mmc_sdio_init_card(host, host->ocr, host->card,
 				mmc_card_keep_power(host));
 	if (!ret && host->sdio_irqs)
 		mmc_signal_sdio_irq(host);
+
+out:
 	mmc_release_host(host);
 
 	return ret;
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index d29b9c36919a..d2565df8a7fb 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -189,7 +189,7 @@ static int sdio_bus_remove(struct device *dev)
 
 	/* Then undo the runtime PM settings in sdio_bus_probe() */
 	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
-		pm_runtime_put_noidle(dev);
+		pm_runtime_put_sync(dev);
 
 out:
 	return ret;
diff --git a/drivers/mmc/host/of_mmc_spi.c b/drivers/mmc/host/of_mmc_spi.c
index e2aecb7f1d5c..ab66f2454dc4 100644
--- a/drivers/mmc/host/of_mmc_spi.c
+++ b/drivers/mmc/host/of_mmc_spi.c
@@ -25,6 +25,11 @@
 #include <linux/mmc/core.h>
 #include <linux/mmc/host.h>
 
+/* For archs that don't support NO_IRQ (such as mips), provide a dummy value */
+#ifndef NO_IRQ
+#define NO_IRQ 0
+#endif
+
 MODULE_LICENSE("GPL");
 
 enum {
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 5b2e2155b413..dedf3dab8a3b 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -429,7 +429,6 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
 				return -EINVAL;
 			}
 		}
-		mmc_slot(host).ocr_mask = mmc_regulator_get_ocrmask(reg);
 
 		/* Allow an aux regulator */
 		reg = regulator_get(host->dev, "vmmc_aux");
@@ -962,7 +961,8 @@ static void omap_hsmmc_dma_cleanup(struct omap_hsmmc_host *host, int errno)
 	spin_unlock(&host->irq_lock);
 
 	if (host->use_dma && dma_ch != -1) {
-		dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len,
+		dma_unmap_sg(mmc_dev(host->mmc), host->data->sg,
+			host->data->sg_len,
 			omap_hsmmc_get_dma_dir(host, host->data));
 		omap_free_dma(dma_ch);
 	}
@@ -1346,7 +1346,7 @@ static void omap_hsmmc_dma_cb(int lch, u16 ch_status, void *cb_data)
 		return;
 	}
 
-	dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len,
+	dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
 		omap_hsmmc_get_dma_dir(host, data));
 
 	req_in_progress = host->req_in_progress;
diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
index b3654293017b..ce500f03df85 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
@@ -92,7 +92,7 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
 		mmc_data->ocr_mask = p->tmio_ocr_mask;
 		mmc_data->capabilities |= p->tmio_caps;
 
-		if (p->dma_slave_tx >= 0 && p->dma_slave_rx >= 0) {
+		if (p->dma_slave_tx > 0 && p->dma_slave_rx > 0) {
 			priv->param_tx.slave_id = p->dma_slave_tx;
 			priv->param_rx.slave_id = p->dma_slave_rx;
 			priv->dma_priv.chan_priv_tx = &priv->param_tx;
@@ -165,13 +165,14 @@ static int sh_mobile_sdhi_remove(struct platform_device *pdev)
 
 	p->pdata = NULL;
 
+	tmio_mmc_host_remove(host);
+
 	for (i = 0; i < 3; i++) {
 		irq = platform_get_irq(pdev, i);
 		if (irq >= 0)
 			free_irq(irq, host);
 	}
 
-	tmio_mmc_host_remove(host);
 	clk_disable(priv->clk);
 	clk_put(priv->clk);
 	kfree(priv);
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index ad6347bb02dd..0b09e8239aa0 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -824,8 +824,8 @@ static int tmio_mmc_get_ro(struct mmc_host *mmc)
 	struct tmio_mmc_host *host = mmc_priv(mmc);
 	struct tmio_mmc_data *pdata = host->pdata;
 
-	return ((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
-		!(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT));
+	return !((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
+		 (sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT));
 }
 
 static int tmio_mmc_get_cd(struct mmc_host *mmc)
diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c
index cbb03305b77b..d4455ffbefd8 100644
--- a/drivers/mmc/host/vub300.c
+++ b/drivers/mmc/host/vub300.c
@@ -2096,7 +2096,7 @@ static struct mmc_host_ops vub300_mmc_ops = {
 static int vub300_probe(struct usb_interface *interface,
 			const struct usb_device_id *id)
 {				/* NOT irq */
-	struct vub300_mmc_host *vub300 = NULL;
+	struct vub300_mmc_host *vub300;
 	struct usb_host_interface *iface_desc;
 	struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface));
 	int i;
@@ -2118,23 +2118,20 @@ static int vub300_probe(struct usb_interface *interface,
 	command_out_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!command_out_urb) {
 		retval = -ENOMEM;
-		dev_err(&vub300->udev->dev,
-			"not enough memory for the command_out_urb\n");
+		dev_err(&udev->dev, "not enough memory for command_out_urb\n");
 		goto error0;
 	}
 	command_res_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!command_res_urb) {
 		retval = -ENOMEM;
-		dev_err(&vub300->udev->dev,
-			"not enough memory for the command_res_urb\n");
+		dev_err(&udev->dev, "not enough memory for command_res_urb\n");
 		goto error1;
 	}
 	/* this also allocates memory for our VUB300 mmc host device */
 	mmc = mmc_alloc_host(sizeof(struct vub300_mmc_host), &udev->dev);
 	if (!mmc) {
 		retval = -ENOMEM;
-		dev_err(&vub300->udev->dev,
-			"not enough memory for the mmc_host\n");
+		dev_err(&udev->dev, "not enough memory for the mmc_host\n");
 		goto error4;
 	}
 	/* MMC core transfer sizes tunable parameters */
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index e8a140669f90..02145e9697a9 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2761,6 +2761,8 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
 #endif /*CONFIG_MMC_RICOH_MMC*/
 
 #if defined(CONFIG_DMAR) || defined(CONFIG_INTR_REMAP)
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index a311008af5e1..f8910e155566 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1537,6 +1537,7 @@
 #define PCI_DEVICE_ID_RICOH_RL5C476	0x0476
 #define PCI_DEVICE_ID_RICOH_RL5C478	0x0478
 #define PCI_DEVICE_ID_RICOH_R5C822	0x0822
+#define PCI_DEVICE_ID_RICOH_R5CE823	0xe823
 #define PCI_DEVICE_ID_RICOH_R5C832	0x0832
 #define PCI_DEVICE_ID_RICOH_R5C843	0x0843