summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorBen Collins <bcollins@ubuntu.com>2006-06-13 00:12:37 +0200
committerBen Collins <bcollins@ubuntu.com>2006-06-13 00:12:37 +0200
commit647dcb5fae0ebb5da1272ed2773df0d3f152c303 (patch)
tree31d6a6ab3fd8acb2dc9335dfa181972f4433158a
parentieee1394/ohci1394: CycleTooLong interrupt management (diff)
downloadlinux-647dcb5fae0ebb5da1272ed2773df0d3f152c303.tar.xz
linux-647dcb5fae0ebb5da1272ed2773df0d3f152c303.zip
ieee1394: support for slow links or slow 1394b phy ports
Add support for the following types of hardware: + nodes that have a link speed < PHY speed + 1394b PHYs that are less than S800 capable + 1394b/1394a adapter cable between two 1394b PHYs Also, S1600 and S3200 are now supported if IEEE1394_SPEED_MAX is raised. A probing function is added to nodemgr's config ROM fetching routine which adjusts the allowable speed if an access problem was encountered. Pros and Cons of the approach: + minimum code footprint to support this less widely used hardware + nearly no overhead for unaffected hardware - ineffective before nodemgr began to read the ROM of affected nodes - ineffective if ieee1394 is loaded with disable_nodemgr=1 The speed map CSRs which are published to the bus are not touched by the patch. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Hakan Ardo <hakan@debian.org> Cc: Calculex <linux@calculex.com> Cc: Robert J. Kosinski <robk@cmcherald.com> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
-rw-r--r--drivers/ieee1394/eth1394.c6
-rw-r--r--drivers/ieee1394/hosts.h11
-rw-r--r--drivers/ieee1394/ieee1394_core.c14
-rw-r--r--drivers/ieee1394/nodemgr.c61
-rw-r--r--drivers/ieee1394/sbp2.c4
5 files changed, 76 insertions, 20 deletions
diff --git a/drivers/ieee1394/eth1394.c b/drivers/ieee1394/eth1394.c
index 30fa0d43a43a..b2d2c4dd075b 100644
--- a/drivers/ieee1394/eth1394.c
+++ b/drivers/ieee1394/eth1394.c
@@ -502,10 +502,8 @@ static void ether1394_reset_priv (struct net_device *dev, int set_mtu)
/* Determine speed limit */
for (i = 0; i < host->node_count; i++)
- if (max_speed > host->speed_map[NODEID_TO_NODE(host->node_id) *
- 64 + i])
- max_speed = host->speed_map[NODEID_TO_NODE(host->node_id) *
- 64 + i];
+ if (max_speed > host->speed[i])
+ max_speed = host->speed[i];
priv->bc_sspd = max_speed;
/* We'll use our maxpayload as the default mtu */
diff --git a/drivers/ieee1394/hosts.h b/drivers/ieee1394/hosts.h
index 07d188ca8495..d1a47607cb89 100644
--- a/drivers/ieee1394/hosts.h
+++ b/drivers/ieee1394/hosts.h
@@ -30,12 +30,13 @@ struct hpsb_host {
unsigned char iso_listen_count[64];
- int node_count; /* number of identified nodes on this bus */
- int selfid_count; /* total number of SelfIDs received */
- int nodes_active; /* number of nodes that are actually active */
+ int node_count; /* number of identified nodes on this bus */
+ int selfid_count; /* total number of SelfIDs received */
+ int nodes_active; /* number of nodes with active link layer */
+ u8 speed[63]; /* speed between each node and local node */
- nodeid_t node_id; /* node ID of this host */
- nodeid_t irm_id; /* ID of this bus' isochronous resource manager */
+ nodeid_t node_id; /* node ID of this host */
+ nodeid_t irm_id; /* ID of this bus' isochronous resource manager */
nodeid_t busmgr_id; /* ID of this bus' bus manager */
/* this nodes state */
diff --git a/drivers/ieee1394/ieee1394_core.c b/drivers/ieee1394/ieee1394_core.c
index be6854e25ad4..c83e2b8295e3 100644
--- a/drivers/ieee1394/ieee1394_core.c
+++ b/drivers/ieee1394/ieee1394_core.c
@@ -285,9 +285,9 @@ static int check_selfids(struct hpsb_host *host)
static void build_speed_map(struct hpsb_host *host, int nodecount)
{
- u8 speedcap[nodecount];
u8 cldcnt[nodecount];
u8 *map = host->speed_map;
+ u8 *speedcap = host->speed;
struct selfid *sid;
struct ext_selfid *esid;
int i, j, n;
@@ -354,6 +354,11 @@ static void build_speed_map(struct hpsb_host *host, int nodecount)
}
}
}
+
+ /* assume maximum speed for 1394b PHYs, nodemgr will correct it */
+ for (n = 0; n < nodecount; n++)
+ if (speedcap[n] == 3)
+ speedcap[n] = IEEE1394_SPEED_MAX;
}
@@ -554,11 +559,10 @@ int hpsb_send_packet(struct hpsb_packet *packet)
return 0;
}
- if (packet->type == hpsb_async && packet->node_id != ALL_NODES) {
+ if (packet->type == hpsb_async &&
+ NODEID_TO_NODE(packet->node_id) != ALL_NODES)
packet->speed_code =
- host->speed_map[NODEID_TO_NODE(host->node_id) * 64
- + NODEID_TO_NODE(packet->node_id)];
- }
+ host->speed[NODEID_TO_NODE(packet->node_id)];
dump_packet("send packet", packet->header, packet->header_size, packet->speed_code);
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index 082c7fd239f5..948f1b8c4238 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -38,6 +38,7 @@ struct nodemgr_csr_info {
struct hpsb_host *host;
nodeid_t nodeid;
unsigned int generation;
+ unsigned int speed_unverified:1;
};
@@ -57,23 +58,75 @@ static char *nodemgr_find_oui_name(int oui)
return NULL;
}
+/*
+ * Correct the speed map entry. This is necessary
+ * - for nodes with link speed < phy speed,
+ * - for 1394b nodes with negotiated phy port speed < IEEE1394_SPEED_MAX.
+ * A possible speed is determined by trial and error, using quadlet reads.
+ */
+static int nodemgr_check_speed(struct nodemgr_csr_info *ci, u64 addr,
+ quadlet_t *buffer)
+{
+ quadlet_t q;
+ u8 i, *speed, old_speed, good_speed;
+ int ret;
+
+ speed = ci->host->speed + NODEID_TO_NODE(ci->nodeid);
+ old_speed = *speed;
+ good_speed = IEEE1394_SPEED_MAX + 1;
+
+ /* Try every speed from S100 to old_speed.
+ * If we did it the other way around, a too low speed could be caught
+ * if the retry succeeded for some other reason, e.g. because the link
+ * just finished its initialization. */
+ for (i = IEEE1394_SPEED_100; i <= old_speed; i++) {
+ *speed = i;
+ ret = hpsb_read(ci->host, ci->nodeid, ci->generation, addr,
+ &q, sizeof(quadlet_t));
+ if (ret)
+ break;
+ *buffer = q;
+ good_speed = i;
+ }
+ if (good_speed <= IEEE1394_SPEED_MAX) {
+ HPSB_DEBUG("Speed probe of node " NODE_BUS_FMT " yields %s",
+ NODE_BUS_ARGS(ci->host, ci->nodeid),
+ hpsb_speedto_str[good_speed]);
+ *speed = good_speed;
+ ci->speed_unverified = 0;
+ return 0;
+ }
+ *speed = old_speed;
+ return ret;
+}
static int nodemgr_bus_read(struct csr1212_csr *csr, u64 addr, u16 length,
void *buffer, void *__ci)
{
struct nodemgr_csr_info *ci = (struct nodemgr_csr_info*)__ci;
- int i, ret = 0;
+ int i, ret;
for (i = 1; ; i++) {
ret = hpsb_read(ci->host, ci->nodeid, ci->generation, addr,
buffer, length);
- if (!ret || i == 3)
+ if (!ret) {
+ ci->speed_unverified = 0;
+ break;
+ }
+ /* Give up after 3rd failure. */
+ if (i == 3)
break;
+ /* The ieee1394_core guessed the node's speed capability from
+ * the self ID. Check whether a lower speed works. */
+ if (ci->speed_unverified && length == sizeof(quadlet_t)) {
+ ret = nodemgr_check_speed(ci, addr, buffer);
+ if (!ret)
+ break;
+ }
if (msleep_interruptible(334))
return -EINTR;
}
-
return ret;
}
@@ -1204,6 +1257,8 @@ static void nodemgr_node_scan_one(struct host_info *hi,
ci->host = host;
ci->nodeid = nodeid;
ci->generation = generation;
+ ci->speed_unverified =
+ host->speed[NODEID_TO_NODE(nodeid)] > IEEE1394_SPEED_100;
/* We need to detect when the ConfigROM's generation has changed,
* so we only update the node's info when it needs to be. */
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 24cd1e250d84..c30e03a0e63b 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -1664,10 +1664,8 @@ static int sbp2_max_speed_and_size(struct scsi_id_instance_data *scsi_id)
SBP2_DEBUG_ENTER();
- /* Initial setting comes from the hosts speed map */
scsi_id->speed_code =
- hi->host->speed_map[NODEID_TO_NODE(hi->host->node_id) * 64 +
- NODEID_TO_NODE(scsi_id->ne->nodeid)];
+ hi->host->speed[NODEID_TO_NODE(scsi_id->ne->nodeid)];
/* Bump down our speed if the user requested it */
if (scsi_id->speed_code > max_speed) {