Merge tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Merge "Samsung DT 2nd updates for v3.17" from Kukjin Kim:

This is based on tags/exynos-power because this DT changes
are depending PMU cleanup.

Fixes boot for exynos5260 and exynos5410,
- Since exynos cannot boot without obtaining PMU address via
  DT from now on, add PMU node for exynos5260 and exynos5410

For preparing exynos5250-spring,
- move max77686 and cypress,cyapa trackpad from exynos5250-
  cros-common to exynos5250-snow DT file
(Note exynos5250-spring is not included in this branch yet)

For exynos3250,
- add TMU node and remove duplicated interrupt-parent
- add missing pinctrl property for uart0 and uart1

For exynos5250-smdk5250 board
- add max77686 pmic interrupt property which is connected to
  gpx3

* tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (28 commits)
  ARM: dts: Add missing pinctrl for uart0/1 for exynos3250
  ARM: dts: Remove duplicate 'interrput-parent' property for exynos3250
  ARM: dts: Add TMU dt node to monitor the temperature for exynos3250
  ARM: dts: Specify MAX77686 pmic interrupt for exynos5250-smdk5250
  ARM: dts: cypress,cyapa trackpad is exynos5250-Snow only
  ARM: dts: max77686 is exynos5250-snow only
  ARM: EXYNOS: Add exynos5260 PMU compatible string to DT match table
  ARM: dts: Add PMU DT node for exynos5260 SoC
  ARM: EXYNOS: Add support for Exynos5410 PMU
  ARM: dts: Add PMU to exynos5410
  ARM: dts: Document exynos5410 PMU
  ARM: EXYNOS: Move cpufreq and cpuidle device registration to init_machine
  ARM: EXYNOS: Refactored code for using PMU address via DT
  ARM: EXYNOS: Support cluster power off on exynos5420/5800
  ARM: EXYNOS: populate suspend and powered_up callbacks for mcpm
  ARM: EXYNOS: do not allow cpuidle registration for exynos5420
  cpuidle: big.LITTLE: init driver for exynos5420
  cpuidle: big.LITTLE: Add ARCH_EXYNOS entry in config
  ARM: EXYNOS: add generic function to calculate cpu number
  cpuidle: big.LITTLE: add of_device_id structure
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

24 files changed, 697 insertions, 594 deletions

diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
index 2a4ab046a8a1..e0e955e7af8c 100644
--- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
@@ -7,6 +7,8 @@ Properties:
 		   - "samsung,exynos4212-pmu" - for Exynos4212 SoC,
 		   - "samsung,exynos4412-pmu" - for Exynos4412 SoC,
 		   - "samsung,exynos5250-pmu" - for Exynos5250 SoC,
+		   - "samsung,exynos5260-pmu" - for Exynos5260 SoC.
+		   - "samsung,exynos5410-pmu" - for Exynos5410 SoC,
 		   - "samsung,exynos5420-pmu" - for Exynos5420 SoC.
 		second value must be always "syscon".
 
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 8dcc00d44dab..e43b838bae4b 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -625,53 +625,41 @@ choice
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
-		bool "Use S3C UART 0 for low-level debug"
+		bool "Use Samsung S3C UART 0 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART 0. The port must have been initialised
 		  by the boot-loader before use.
 
-		  The uncompressor code port configuration is now handled
-		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
 	config DEBUG_S3C_UART1
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
-		bool "Use S3C UART 1 for low-level debug"
+		bool "Use Samsung S3C UART 1 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART 1. The port must have been initialised
 		  by the boot-loader before use.
 
-		  The uncompressor code port configuration is now handled
-		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
 	config DEBUG_S3C_UART2
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
-		bool "Use S3C UART 2 for low-level debug"
+		bool "Use Samsung S3C UART 2 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART 2. The port must have been initialised
 		  by the boot-loader before use.
 
-		  The uncompressor code port configuration is now handled
-		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
 	config DEBUG_S3C_UART3
 		depends on PLAT_SAMSUNG && ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART
-		bool "Use S3C UART 3 for low-level debug"
+		bool "Use Samsung S3C UART 3 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART 3. The port must have been initialised
 		  by the boot-loader before use.
 
-		  The uncompressor code port configuration is now handled
-		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
 	config DEBUG_S3C2410_UART0
 		depends on ARCH_S3C24XX
 		select DEBUG_S3C2410_UART
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 77a06df6dc72..abd6eb31b2c2 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -168,6 +168,15 @@
 			status = "disabled";
 		};
 
+		tmu: tmu@100C0000 {
+			compatible = "samsung,exynos3250-tmu";
+			reg = <0x100C0000 0x100>;
+			interrupts = <0 216 0>;
+			clocks = <&cmu CLK_TMU_APBIF>;
+			clock-names = "tmu_apbif";
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@10481000 {
 			compatible = "arm,cortex-a15-gic";
 			#interrupt-cells = <3>;
@@ -195,7 +204,6 @@
 
 			wakeup-interrupt-controller {
 				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupt-parent = <&gic>;
 				interrupts = <0 48 0>;
 			};
 		};
@@ -234,7 +242,6 @@
 			compatible = "arm,amba-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			interrupt-parent = <&gic>;
 			ranges;
 
 			pdma0: pdma@12680000 {
@@ -277,6 +284,8 @@
 			interrupts = <0 109 0>;
 			clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
 			clock-names = "uart", "clk_uart_baud0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_data &uart0_fctl>;
 			status = "disabled";
 		};
 
@@ -286,6 +295,8 @@
 			interrupts = <0 110 0>;
 			clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
 			clock-names = "uart", "clk_uart_baud0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_data>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
index 89ac90f59e2e..e603e9c70142 100644
--- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
@@ -27,177 +27,18 @@
 		i2c2_bus: i2c2-bus {
 			samsung,pin-pud = <0>;
 		};
-
-		max77686_irq: max77686-irq {
-			samsung,pins = "gpx3-2";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
 	};
 
 	i2c@12C60000 {
 		status = "okay";
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <378000>;
-
-		max77686@09 {
-			compatible = "maxim,max77686";
-			interrupt-parent = <&gpx3>;
-			interrupts = <2 0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&max77686_irq>;
-			wakeup-source;
-			reg = <0x09>;
-			#clock-cells = <1>;
-
-			voltage-regulators {
-				ldo1_reg: LDO1 {
-					regulator-name = "P1.0V_LDO_OUT1";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo2_reg: LDO2 {
-					regulator-name = "P1.8V_LDO_OUT2";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "P1.8V_LDO_OUT3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "P1.1V_LDO_OUT7";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "P1.0V_LDO_OUT8";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "P1.8V_LDO_OUT10";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "P3.0V_LDO_OUT12";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "P1.8V_LDO_OUT14";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "P1.0V_LDO_OUT15";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "P1.8V_LDO_OUT16";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "vdd_mif";
-					regulator-min-microvolt = <950000>;
-					regulator-max-microvolt = <1300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "vdd_int";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "vdd_g3d";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck5_reg: BUCK5 {
-					regulator-name = "P1.8V_BUCK_OUT5";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck6_reg: BUCK6 {
-					regulator-name = "P1.35V_BUCK_OUT6";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-				};
-
-				buck7_reg: BUCK7 {
-					regulator-name = "P2.0V_BUCK_OUT7";
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					regulator-always-on;
-				};
-
-				buck8_reg: BUCK8 {
-					regulator-name = "P2.85V_BUCK_OUT8";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-			};
-		};
 	};
 
 	i2c@12C70000 {
 		status = "okay";
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <378000>;
-
-		trackpad {
-			reg = <0x67>;
-			compatible = "cypress,cyapa";
-			interrupts = <2 0>;
-			interrupt-parent = <&gpx1>;
-			wakeup-source;
-		};
 	};
 
 	i2c@12C80000 {
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index a794a705d404..aaa055ac0fe3 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -44,6 +44,8 @@
 		max77686@09 {
 			compatible = "maxim,max77686";
 			reg = <0x09>;
+			interrupt-parent = <&gpx3>;
+			interrupts = <2 0>;
 
 			voltage-regulators {
 				ldo1_reg: LDO1 {
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index c682c8831172..f2b8c4116541 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -344,4 +344,169 @@
 	};
 };
 
+&i2c_0 {
+	max77686@09 {
+		compatible = "maxim,max77686";
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max77686_irq>;
+		wakeup-source;
+		reg = <0x09>;
+		#clock-cells = <1>;
+
+		voltage-regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "P1.0V_LDO_OUT1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "P1.8V_LDO_OUT2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "P1.8V_LDO_OUT3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "P1.1V_LDO_OUT7";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "P1.0V_LDO_OUT8";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "P1.8V_LDO_OUT10";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "P3.0V_LDO_OUT12";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "P1.8V_LDO_OUT14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "P1.0V_LDO_OUT15";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "P1.8V_LDO_OUT16";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "P1.8V_BUCK_OUT5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "P1.35V_BUCK_OUT6";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "P2.0V_BUCK_OUT7";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "P2.85V_BUCK_OUT8";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c_1 {
+	trackpad {
+		reg = <0x67>;
+		compatible = "cypress,cyapa";
+		interrupts = <2 0>;
+		interrupt-parent = <&gpx1>;
+		wakeup-source;
+	};
+};
+
+&pinctrl_0 {
+	max77686_irq: max77686-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
 #include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index 5398a60207ca..4f2fabeecb0e 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -227,6 +227,11 @@
 			interrupts = <0 243 0>;
 		};
 
+		pmu_system_controller: system-controller@10D50000 {
+			compatible = "samsung,exynos5260-pmu", "syscon";
+			reg = <0x10D50000 0x10000>;
+		};
+
 		uart0: serial@12C00000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x12C00000 0x100>;
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 9d0b8cc1409c..790d4886d7b5 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -91,6 +91,11 @@
 			reg = <0x10000000 0x100>;
 		};
 
+		pmu_system_controller: system-controller@10040000 {
+			compatible = "samsung,exynos5410-pmu", "syscon";
+			reg = <0x10040000 0x5000>;
+		};
+
 		mct: mct@101C0000 {
 			compatible = "samsung,exynos4210-mct";
 			reg = <0x101C0000 0xB00>;
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 1ee91763fa7c..47b904b3b973 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -111,25 +111,14 @@ IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK)
 #define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5410() || \
 			  soc_is_exynos5420() || soc_is_exynos5800())
 
-void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1);
-
-struct map_desc;
 extern void __iomem *sysram_ns_base_addr;
 extern void __iomem *sysram_base_addr;
-void exynos_init_io(void);
-void exynos_restart(enum reboot_mode mode, const char *cmd);
+extern void __iomem *pmu_base_addr;
 void exynos_sysram_init(void);
-void exynos_cpuidle_init(void);
-void exynos_cpufreq_init(void);
-void exynos_init_late(void);
 
 void exynos_firmware_init(void);
 
-#ifdef CONFIG_PINCTRL_EXYNOS
 extern u32 exynos_get_eint_wake_mask(void);
-#else
-static inline u32 exynos_get_eint_wake_mask(void) { return 0xffffffff; }
-#endif
 
 #ifdef CONFIG_PM_SLEEP
 extern void __init exynos_pm_init(void);
@@ -145,7 +134,7 @@ extern void exynos_cpu_die(unsigned int cpu);
 
 /* PMU(Power Management Unit) support */
 
-#define PMU_TABLE_END	NULL
+#define PMU_TABLE_END	(-1U)
 
 enum sys_powerdown {
 	SYS_AFTR,
@@ -155,7 +144,7 @@ enum sys_powerdown {
 };
 
 struct exynos_pmu_conf {
-	void __iomem *reg;
+	unsigned int offset;
 	unsigned int val[NUM_SYS_POWERDOWN];
 };
 
@@ -171,4 +160,14 @@ extern void exynos_enter_aftr(void);
 extern void s5p_init_cpu(void __iomem *cpuid_addr);
 extern unsigned int samsung_rev(void);
 
+static inline void pmu_raw_writel(u32 val, u32 offset)
+{
+	__raw_writel(val, pmu_base_addr + offset);
+}
+
+static inline u32 pmu_raw_readl(u32 offset)
+{
+	return __raw_readl(pmu_base_addr + offset);
+}
+
 #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 46d893fcbe85..493dbc23936f 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -19,6 +19,7 @@
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
+#include <linux/irqchip.h>
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -29,6 +30,9 @@
 #include "common.h"
 #include "mfc.h"
 #include "regs-pmu.h"
+#include "regs-sys.h"
+
+void __iomem *pmu_base_addr;
 
 static struct map_desc exynos4_iodesc[] __initdata = {
 	{
@@ -57,11 +61,6 @@ static struct map_desc exynos4_iodesc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S5P_VA_PMU,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_PMU),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
 		.virtual	= (unsigned long)S5P_VA_COMBINER_BASE,
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_COMBINER),
 		.length		= SZ_4K,
@@ -135,19 +134,14 @@ static struct map_desc exynos5_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_CMU),
 		.length		= 144 * SZ_1K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_PMU,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_PMU),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
 	},
 };
 
-void exynos_restart(enum reboot_mode mode, const char *cmd)
+static void exynos_restart(enum reboot_mode mode, const char *cmd)
 {
 	struct device_node *np;
 	u32 val = 0x1;
-	void __iomem *addr = EXYNOS_SWRESET;
+	void __iomem *addr = pmu_base_addr + EXYNOS_SWRESET;
 
 	if (of_machine_is_compatible("samsung,exynos5440")) {
 		u32 status;
@@ -171,17 +165,6 @@ static struct platform_device exynos_cpuidle = {
 	.id                = -1,
 };
 
-void __init exynos_cpuidle_init(void)
-{
-	if (soc_is_exynos4210() || soc_is_exynos5250())
-		platform_device_register(&exynos_cpuidle);
-}
-
-void __init exynos_cpufreq_init(void)
-{
-	platform_device_register_simple("exynos-cpufreq", -1, NULL, 0);
-}
-
 void __iomem *sysram_base_addr;
 void __iomem *sysram_ns_base_addr;
 
@@ -204,7 +187,7 @@ void __init exynos_sysram_init(void)
 	}
 }
 
-void __init exynos_init_late(void)
+static void __init exynos_init_late(void)
 {
 	if (of_machine_is_compatible("samsung,exynos5440"))
 		/* to be supported later */
@@ -251,7 +234,7 @@ static void __init exynos_map_io(void)
 		iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
 }
 
-void __init exynos_init_io(void)
+static void __init exynos_init_io(void)
 {
 	debug_ll_io_init();
 
@@ -263,6 +246,41 @@ void __init exynos_init_io(void)
 	exynos_map_io();
 }
 
+static const struct of_device_id exynos_dt_pmu_match[] = {
+	{ .compatible = "samsung,exynos3250-pmu" },
+	{ .compatible = "samsung,exynos4210-pmu" },
+	{ .compatible = "samsung,exynos4212-pmu" },
+	{ .compatible = "samsung,exynos4412-pmu" },
+	{ .compatible = "samsung,exynos5250-pmu" },
+	{ .compatible = "samsung,exynos5260-pmu" },
+	{ .compatible = "samsung,exynos5410-pmu" },
+	{ .compatible = "samsung,exynos5420-pmu" },
+	{ /*sentinel*/ },
+};
+
+static void exynos_map_pmu(void)
+{
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, exynos_dt_pmu_match);
+	if (np)
+		pmu_base_addr = of_iomap(np, 0);
+
+	if (!pmu_base_addr)
+		panic("failed to find exynos pmu register\n");
+}
+
+static void __init exynos_init_irq(void)
+{
+	irqchip_init();
+	/*
+	 * Since platsmp.c needs pmu base address by the time
+	 * DT is not unflatten so we can't use DT APIs before
+	 * init_irq
+	 */
+	exynos_map_pmu();
+}
+
 static void __init exynos_dt_machine_init(void)
 {
 	struct device_node *i2c_np;
@@ -298,8 +316,11 @@ static void __init exynos_dt_machine_init(void)
 	if (!IS_ENABLED(CONFIG_SMP))
 		exynos_sysram_init();
 
-	exynos_cpuidle_init();
-	exynos_cpufreq_init();
+	if (of_machine_is_compatible("samsung,exynos4210") ||
+			of_machine_is_compatible("samsung,exynos5250"))
+		platform_device_register(&exynos_cpuidle);
+
+	platform_device_register_simple("exynos-cpufreq", -1, NULL, 0);
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
@@ -343,6 +364,7 @@ DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")
 	.smp		= smp_ops(exynos_smp_ops),
 	.map_io		= exynos_init_io,
 	.init_early	= exynos_firmware_init,
+	.init_irq	= exynos_init_irq,
 	.init_machine	= exynos_dt_machine_init,
 	.init_late	= exynos_init_late,
 	.dt_compat	= exynos_dt_compat,
diff --git a/arch/arm/mach-exynos/headsmp.S b/arch/arm/mach-exynos/headsmp.S
index cdd9d91e9933..b54f9701e421 100644
--- a/arch/arm/mach-exynos/headsmp.S
+++ b/arch/arm/mach-exynos/headsmp.S
@@ -1,5 +1,4 @@
 /*
- *  linux/arch/arm/mach-exynos4/headsmp.S
  *
  *  Cloned from linux/arch/arm/mach-realview/headsmp.S
  *
diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c
index 920a4baa53cd..4d86961a7957 100644
--- a/arch/arm/mach-exynos/hotplug.c
+++ b/arch/arm/mach-exynos/hotplug.c
@@ -1,5 +1,4 @@
-/* linux arch/arm/mach-exynos4/hotplug.c
- *
+/*
  *  Cloned from linux/arch/arm/mach-realview/hotplug.c
  *
  *  Copyright (C) 2002 ARM Ltd.
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 548269a60634..f0b7e92bad6c 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-exynos/include/mach/map.h
- *
+/*
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
@@ -28,9 +27,6 @@
 #define EXYNOS4_PA_SYSCON		0x10010000
 #define EXYNOS5_PA_SYSCON		0x10050100
 
-#define EXYNOS4_PA_PMU			0x10020000
-#define EXYNOS5_PA_PMU			0x10040000
-
 #define EXYNOS4_PA_CMU			0x10030000
 #define EXYNOS5_PA_CMU			0x10010000
 
diff --git a/arch/arm/mach-exynos/include/mach/memory.h b/arch/arm/mach-exynos/include/mach/memory.h
index 2a4cdb7cb326..e19df1f18c0d 100644
--- a/arch/arm/mach-exynos/include/mach/memory.h
+++ b/arch/arm/mach-exynos/include/mach/memory.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-exynos4/include/mach/memory.h
- *
+/*
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c
index ace0ed617476..70e8ccd94668 100644
--- a/arch/arm/mach-exynos/mcpm-exynos.c
+++ b/arch/arm/mach-exynos/mcpm-exynos.c
@@ -26,6 +26,10 @@
 #define EXYNOS5420_CPUS_PER_CLUSTER	4
 #define EXYNOS5420_NR_CLUSTERS		2
 
+#define EXYNOS5420_ENABLE_AUTOMATIC_CORE_DOWN	BIT(9)
+#define EXYNOS5420_USE_ARM_CORE_DOWN_STATE	BIT(29)
+#define EXYNOS5420_USE_L2_COMMON_UP_STATE	BIT(30)
+
 /*
  * The common v7_exit_coherency_flush API could not be used because of the
  * Erratum 799270 workaround. This macro is the same as the common one (in
@@ -51,7 +55,7 @@
 	"dsb\n\t" \
 	"ldmfd	sp!, {fp, ip}" \
 	: \
-	: "Ir" (S5P_INFORM0) \
+	: "Ir" (pmu_base_addr + S5P_INFORM0) \
 	: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
 	  "r9", "r10", "lr", "memory")
 
@@ -73,36 +77,9 @@ cpu_use_count[EXYNOS5420_CPUS_PER_CLUSTER][EXYNOS5420_NR_CLUSTERS];
 
 #define exynos_cluster_unused(cluster) !exynos_cluster_usecnt(cluster)
 
-static int exynos_cluster_power_control(unsigned int cluster, int enable)
-{
-	unsigned int tries = 100;
-	unsigned int val;
-
-	if (enable) {
-		exynos_cluster_power_up(cluster);
-		val = S5P_CORE_LOCAL_PWR_EN;
-	} else {
-		exynos_cluster_power_down(cluster);
-		val = 0;
-	}
-
-	/* Wait until cluster power control is applied */
-	while (tries--) {
-		if (exynos_cluster_power_state(cluster) == val)
-			return 0;
-
-		cpu_relax();
-	}
-	pr_debug("timed out waiting for cluster %u to power %s\n", cluster,
-		enable ? "on" : "off");
-
-	return -ETIMEDOUT;
-}
-
 static int exynos_power_up(unsigned int cpu, unsigned int cluster)
 {
 	unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
-	int err = 0;
 
 	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
 	if (cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
@@ -126,12 +103,9 @@ static int exynos_power_up(unsigned int cpu, unsigned int cluster)
 		 * cores.
 		 */
 		if (was_cluster_down)
-			err = exynos_cluster_power_control(cluster, 1);
+			exynos_cluster_power_up(cluster);
 
-		if (!err)
-			exynos_cpu_power_up(cpunr);
-		else
-			exynos_cluster_power_control(cluster, 0);
+		exynos_cpu_power_up(cpunr);
 	} else if (cpu_use_count[cpu][cluster] != 2) {
 		/*
 		 * The only possible values are:
@@ -147,7 +121,7 @@ static int exynos_power_up(unsigned int cpu, unsigned int cluster)
 	arch_spin_unlock(&exynos_mcpm_lock);
 	local_irq_enable();
 
-	return err;
+	return 0;
 }
 
 /*
@@ -178,9 +152,10 @@ static void exynos_power_down(void)
 	if (cpu_use_count[cpu][cluster] == 0) {
 		exynos_cpu_power_down(cpunr);
 
-		if (exynos_cluster_unused(cluster))
-			/* TODO: Turn off the cluster here to save power. */
+		if (exynos_cluster_unused(cluster)) {
+			exynos_cluster_power_down(cluster);
 			last_man = true;
+		}
 	} else if (cpu_use_count[cpu][cluster] == 1) {
 		/*
 		 * A power_up request went ahead of us.
@@ -257,10 +232,46 @@ static int exynos_wait_for_powerdown(unsigned int cpu, unsigned int cluster)
 	return -ETIMEDOUT; /* timeout */
 }
 
+static void exynos_powered_up(void)
+{
+	unsigned int mpidr, cpu, cluster;
+
+	mpidr = read_cpuid_mpidr();
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+	arch_spin_lock(&exynos_mcpm_lock);
+	if (cpu_use_count[cpu][cluster] == 0)
+		cpu_use_count[cpu][cluster] = 1;
+	arch_spin_unlock(&exynos_mcpm_lock);
+}
+
+static void exynos_suspend(u64 residency)
+{
+	unsigned int mpidr, cpunr;
+
+	exynos_power_down();
+
+	/*
+	 * Execution reaches here only if cpu did not power down.
+	 * Hence roll back the changes done in exynos_power_down function.
+	 *
+	 * CAUTION: "This function requires the stack data to be visible through
+	 * power down and can only be executed on processors like A15 and A7
+	 * that hit the cache with the C bit clear in the SCTLR register."
+	*/
+	mpidr = read_cpuid_mpidr();
+	cpunr = exynos_pmu_cpunr(mpidr);
+
+	exynos_cpu_power_up(cpunr);
+}
+
 static const struct mcpm_platform_ops exynos_power_ops = {
 	.power_up		= exynos_power_up,
 	.power_down		= exynos_power_down,
 	.wait_for_powerdown	= exynos_wait_for_powerdown,
+	.suspend		= exynos_suspend,
+	.powered_up		= exynos_powered_up,
 };
 
 static void __init exynos_mcpm_usage_count_init(void)
@@ -299,6 +310,7 @@ static int __init exynos_mcpm_init(void)
 {
 	struct device_node *node;
 	void __iomem *ns_sram_base_addr;
+	unsigned int value, i;
 	int ret;
 
 	node = of_find_matching_node(NULL, exynos_dt_mcpm_match);
@@ -325,7 +337,7 @@ static int __init exynos_mcpm_init(void)
 	 * To increase the stability of KFC reset we need to program
 	 * the PMU SPARE3 register
 	 */
-	__raw_writel(EXYNOS5420_SWRESET_KFC_SEL, S5P_PMU_SPARE3);
+	pmu_raw_writel(EXYNOS5420_SWRESET_KFC_SEL, S5P_PMU_SPARE3);
 
 	exynos_mcpm_usage_count_init();
 
@@ -342,6 +354,26 @@ static int __init exynos_mcpm_init(void)
 	pr_info("Exynos MCPM support installed\n");
 
 	/*
+	 * On Exynos5420/5800 for the A15 and A7 clusters:
+	 *
+	 * EXYNOS5420_ENABLE_AUTOMATIC_CORE_DOWN ensures that all the cores
+	 * in a cluster are turned off before turning off the cluster L2.
+	 *
+	 * EXYNOS5420_USE_ARM_CORE_DOWN_STATE ensures that a cores is powered
+	 * off before waking it up.
+	 *
+	 * EXYNOS5420_USE_L2_COMMON_UP_STATE ensures that cluster L2 will be
+	 * turned on before the first man is powered up.
+	 */
+	for (i = 0; i < EXYNOS5420_NR_CLUSTERS; i++) {
+		value = pmu_raw_readl(EXYNOS_COMMON_OPTION(i));
+		value |= EXYNOS5420_ENABLE_AUTOMATIC_CORE_DOWN |
+			 EXYNOS5420_USE_ARM_CORE_DOWN_STATE    |
+			 EXYNOS5420_USE_L2_COMMON_UP_STATE;
+		pmu_raw_writel(value, EXYNOS_COMMON_OPTION(i));
+	}
+
+	/*
 	 * U-Boot SPL is hardcoded to jump to the start of ns_sram_base_addr
 	 * as part of secondary_cpu_start().  Let's redirect it to the
 	 * mcpm_entry_point().
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 50b9aad5e27b..7c829989859c 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-exynos4/platsmp.c
- *
+ /*
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
@@ -27,6 +26,8 @@
 #include <asm/smp_scu.h>
 #include <asm/firmware.h>
 
+#include <mach/map.h>
+
 #include "common.h"
 #include "regs-pmu.h"
 
@@ -35,7 +36,7 @@ extern void exynos4_secondary_startup(void);
 static inline void __iomem *cpu_boot_reg_base(void)
 {
 	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
-		return S5P_INFORM5;
+		return pmu_base_addr + S5P_INFORM5;
 	return sysram_base_addr;
 }
 
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 202ca73e49c4..bcb96be1efee 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -35,6 +35,7 @@
 
 #include "common.h"
 #include "regs-pmu.h"
+#include "regs-sys.h"
 
 /**
  * struct exynos_wkup_irq - Exynos GIC to PMU IRQ mapping
@@ -110,7 +111,7 @@ static int exynos_irq_set_wake(struct irq_data *data, unsigned int state)
  */
 void exynos_cpu_power_down(int cpu)
 {
-	__raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
+	pmu_raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
 }
 
 /**
@@ -121,8 +122,8 @@ void exynos_cpu_power_down(int cpu)
  */
 void exynos_cpu_power_up(int cpu)
 {
-	__raw_writel(S5P_CORE_LOCAL_PWR_EN,
-		     EXYNOS_ARM_CORE_CONFIGURATION(cpu));
+	pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN,
+			EXYNOS_ARM_CORE_CONFIGURATION(cpu));
 }
 
 /**
@@ -132,7 +133,7 @@ void exynos_cpu_power_up(int cpu)
  */
 int exynos_cpu_power_state(int cpu)
 {
-	return (__raw_readl(EXYNOS_ARM_CORE_STATUS(cpu)) &
+	return (pmu_raw_readl(EXYNOS_ARM_CORE_STATUS(cpu)) &
 			S5P_CORE_LOCAL_PWR_EN);
 }
 
@@ -142,7 +143,7 @@ int exynos_cpu_power_state(int cpu)
  */
 void exynos_cluster_power_down(int cluster)
 {
-	__raw_writel(0, EXYNOS_COMMON_CONFIGURATION(cluster));
+	pmu_raw_writel(0, EXYNOS_COMMON_CONFIGURATION(cluster));
 }
 
 /**
@@ -151,8 +152,8 @@ void exynos_cluster_power_down(int cluster)
  */
 void exynos_cluster_power_up(int cluster)
 {
-	__raw_writel(S5P_CORE_LOCAL_PWR_EN,
-		     EXYNOS_COMMON_CONFIGURATION(cluster));
+	pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN,
+			EXYNOS_COMMON_CONFIGURATION(cluster));
 }
 
 /**
@@ -162,16 +163,20 @@ void exynos_cluster_power_up(int cluster)
  */
 int exynos_cluster_power_state(int cluster)
 {
-	return (__raw_readl(EXYNOS_COMMON_STATUS(cluster)) &
+	return (pmu_raw_readl(EXYNOS_COMMON_STATUS(cluster)) &
 			S5P_CORE_LOCAL_PWR_EN);
 }
 
 #define EXYNOS_BOOT_VECTOR_ADDR	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
-			S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
-			(sysram_base_addr + 0x24) : S5P_INFORM0))
+			pmu_base_addr + S5P_INFORM7 : \
+			(samsung_rev() == EXYNOS4210_REV_1_0 ? \
+			(sysram_base_addr + 0x24) : \
+			pmu_base_addr + S5P_INFORM0))
 #define EXYNOS_BOOT_VECTOR_FLAG	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
-			S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
-			(sysram_base_addr + 0x20) : S5P_INFORM1))
+			pmu_base_addr + S5P_INFORM6 : \
+			(samsung_rev() == EXYNOS4210_REV_1_0 ? \
+			(sysram_base_addr + 0x20) : \
+			pmu_base_addr + S5P_INFORM1))
 
 #define S5P_CHECK_AFTR  0xFCBA0D10
 #define S5P_CHECK_SLEEP 0x00000BAD
@@ -179,7 +184,7 @@ int exynos_cluster_power_state(int cluster)
 /* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
 static void exynos_set_wakeupmask(long mask)
 {
-	__raw_writel(mask, S5P_WAKEUP_MASK);
+	pmu_raw_writel(mask, S5P_WAKEUP_MASK);
 }
 
 static void exynos_cpu_set_boot_vector(long flags)
@@ -256,27 +261,27 @@ static void exynos_pm_prepare(void)
 	unsigned int tmp;
 
 	/* Set wake-up mask registers */
-	__raw_writel(exynos_get_eint_wake_mask(), S5P_EINT_WAKEUP_MASK);
-	__raw_writel(exynos_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
+	pmu_raw_writel(exynos_get_eint_wake_mask(), S5P_EINT_WAKEUP_MASK);
+	pmu_raw_writel(exynos_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
 
 	s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
 
 	if (soc_is_exynos5250()) {
 		s3c_pm_do_save(exynos5_sys_save, ARRAY_SIZE(exynos5_sys_save));
 		/* Disable USE_RETENTION of JPEG_MEM_OPTION */
-		tmp = __raw_readl(EXYNOS5_JPEG_MEM_OPTION);
+		tmp = pmu_raw_readl(EXYNOS5_JPEG_MEM_OPTION);
 		tmp &= ~EXYNOS5_OPTION_USE_RETENTION;
-		__raw_writel(tmp, EXYNOS5_JPEG_MEM_OPTION);
+		pmu_raw_writel(tmp, EXYNOS5_JPEG_MEM_OPTION);
 	}
 
 	/* Set value of power down register for sleep mode */
 
 	exynos_sys_powerdown_conf(SYS_SLEEP);
-	__raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1);
+	pmu_raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1);
 
 	/* ensure at least INFORM0 has the resume address */
 
-	__raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0);
+	pmu_raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0);
 }
 
 static void exynos_pm_central_suspend(void)
@@ -284,9 +289,9 @@ static void exynos_pm_central_suspend(void)
 	unsigned long tmp;
 
 	/* Setting Central Sequence Register for power down mode */
-	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
+	tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
 	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
-	__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+	pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
 }
 
 static int exynos_pm_suspend(void)
@@ -298,7 +303,7 @@ static int exynos_pm_suspend(void)
 	/* Setting SEQ_OPTION register */
 
 	tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0);
-	__raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
+	pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
 
 	if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9)
 		exynos_cpu_save_register();
@@ -316,12 +321,12 @@ static int exynos_pm_central_resume(void)
 	 * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
 	 * in this situation.
 	 */
-	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
+	tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
 	if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
 		tmp |= S5P_CENTRAL_LOWPWR_CFG;
-		__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+		pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
 		/* clear the wakeup state register */
-		__raw_writel(0x0, S5P_WAKEUP_STAT);
+		pmu_raw_writel(0x0, S5P_WAKEUP_STAT);
 		/* No need to perform below restore code */
 		return -1;
 	}
@@ -339,13 +344,13 @@ static void exynos_pm_resume(void)
 
 	/* For release retention */
 
-	__raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION);
-	__raw_writel((1 << 28), S5P_PAD_RET_GPIO_OPTION);
-	__raw_writel((1 << 28), S5P_PAD_RET_UART_OPTION);
-	__raw_writel((1 << 28), S5P_PAD_RET_MMCA_OPTION);
-	__raw_writel((1 << 28), S5P_PAD_RET_MMCB_OPTION);
-	__raw_writel((1 << 28), S5P_PAD_RET_EBIA_OPTION);
-	__raw_writel((1 << 28), S5P_PAD_RET_EBIB_OPTION);
+	pmu_raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION);
+	pmu_raw_writel((1 << 28), S5P_PAD_RET_GPIO_OPTION);
+	pmu_raw_writel((1 << 28), S5P_PAD_RET_UART_OPTION);
+	pmu_raw_writel((1 << 28), S5P_PAD_RET_MMCA_OPTION);
+	pmu_raw_writel((1 << 28), S5P_PAD_RET_MMCB_OPTION);
+	pmu_raw_writel((1 << 28), S5P_PAD_RET_EBIA_OPTION);
+	pmu_raw_writel((1 << 28), S5P_PAD_RET_EBIB_OPTION);
 
 	if (soc_is_exynos5250())
 		s3c_pm_do_restore(exynos5_sys_save,
@@ -359,7 +364,7 @@ static void exynos_pm_resume(void)
 early_wakeup:
 
 	/* Clear SLEEP mode set in INFORM1 */
-	__raw_writel(0x0, S5P_INFORM1);
+	pmu_raw_writel(0x0, S5P_INFORM1);
 
 	return;
 }
@@ -403,7 +408,7 @@ static int exynos_suspend_enter(suspend_state_t state)
 	s3c_pm_restore_uarts();
 
 	S3C_PMDBG("%s: wakeup stat: %08x\n", __func__,
-			__raw_readl(S5P_WAKEUP_STAT));
+			pmu_raw_readl(S5P_WAKEUP_STAT));
 
 	s3c_pm_check_restore();
 
@@ -474,9 +479,9 @@ void __init exynos_pm_init(void)
 	gic_arch_extn.irq_set_wake = exynos_irq_set_wake;
 
 	/* All wakeup disable */
-	tmp = __raw_readl(S5P_WAKEUP_MASK);
+	tmp = pmu_raw_readl(S5P_WAKEUP_MASK);
 	tmp |= ((0xFF << 8) | (0x1F << 1));
-	__raw_writel(tmp, S5P_WAKEUP_MASK);
+	pmu_raw_writel(tmp, S5P_WAKEUP_MASK);
 
 	register_syscore_ops(&exynos_pm_syscore_ops);
 	suspend_set_ops(&exynos_suspend_ops);
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index 797cb134bfff..fd76e1b5a471 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -23,8 +23,7 @@
 #include <linux/of_platform.h>
 #include <linux/sched.h>
 
-#include "regs-pmu.h"
-
+#define INT_LOCAL_PWR_EN	0x7
 #define MAX_CLK_PER_DOMAIN	4
 
 /*
@@ -63,13 +62,13 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
 		}
 	}
 
-	pwr = power_on ? S5P_INT_LOCAL_PWR_EN : 0;
+	pwr = power_on ? INT_LOCAL_PWR_EN : 0;
 	__raw_writel(pwr, base);
 
 	/* Wait max 1ms */
 	timeout = 10;
 
-	while ((__raw_readl(base + 0x4) & S5P_INT_LOCAL_PWR_EN)	!= pwr) {
+	while ((__raw_readl(base + 0x4) & INT_LOCAL_PWR_EN) != pwr) {
 		if (!timeout) {
 			op = (power_on) ? "enable" : "disable";
 			pr_err("Power domain %s %s failed\n", domain->name, op);
@@ -231,7 +230,7 @@ static __init int exynos4_pm_init_power_domain(void)
 no_clk:
 		platform_set_drvdata(pdev, pd);
 
-		on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN;
+		on = __raw_readl(pd->base + 0x4) & INT_LOCAL_PWR_EN;
 
 		pm_genpd_init(&pd->pd, NULL, !on);
 	}
diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
index fb0deda3b3a4..ff9d23f0a7d9 100644
--- a/arch/arm/mach-exynos/pmu.c
+++ b/arch/arm/mach-exynos/pmu.c
@@ -11,7 +11,6 @@
 
 #include <linux/io.h>
 #include <linux/kernel.h>
-#include <linux/bug.h>
 
 #include "common.h"
 #include "regs-pmu.h"
@@ -19,7 +18,7 @@
 static const struct exynos_pmu_conf *exynos_pmu_config;
 
 static const struct exynos_pmu_conf exynos4210_pmu_config[] = {
-	/* { .reg = address, .val = { AFTR, LPA, SLEEP } */
+	/* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
 	{ S5P_ARM_CORE0_LOWPWR,			{ 0x0, 0x0, 0x2 } },
 	{ S5P_DIS_IRQ_CORE0,			{ 0x0, 0x0, 0x0 } },
 	{ S5P_DIS_IRQ_CENTRAL0,			{ 0x0, 0x0, 0x0 } },
@@ -213,7 +212,7 @@ static const struct exynos_pmu_conf exynos4412_pmu_config[] = {
 };
 
 static const struct exynos_pmu_conf exynos5250_pmu_config[] = {
-	/* { .reg = address, .val = { AFTR, LPA, SLEEP } */
+	/* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
 	{ EXYNOS5_ARM_CORE0_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
 	{ EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
 	{ EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
@@ -316,7 +315,7 @@ static const struct exynos_pmu_conf exynos5250_pmu_config[] = {
 	{ PMU_TABLE_END,},
 };
 
-static void __iomem * const exynos5_list_both_cnt_feed[] = {
+static unsigned int const exynos5_list_both_cnt_feed[] = {
 	EXYNOS5_ARM_CORE0_OPTION,
 	EXYNOS5_ARM_CORE1_OPTION,
 	EXYNOS5_ARM_COMMON_OPTION,
@@ -330,7 +329,7 @@ static void __iomem * const exynos5_list_both_cnt_feed[] = {
 	EXYNOS5_TOP_PWR_SYSMEM_OPTION,
 };
 
-static void __iomem * const exynos5_list_diable_wfi_wfe[] = {
+static unsigned int const exynos5_list_diable_wfi_wfe[] = {
 	EXYNOS5_ARM_CORE1_OPTION,
 	EXYNOS5_FSYS_ARM_OPTION,
 	EXYNOS5_ISP_ARM_OPTION,
@@ -345,27 +344,27 @@ static void exynos5_init_pmu(void)
 	 * Enable both SC_FEEDBACK and SC_COUNTER
 	 */
 	for (i = 0 ; i < ARRAY_SIZE(exynos5_list_both_cnt_feed) ; i++) {
-		tmp = __raw_readl(exynos5_list_both_cnt_feed[i]);
+		tmp = pmu_raw_readl(exynos5_list_both_cnt_feed[i]);
 		tmp |= (EXYNOS5_USE_SC_FEEDBACK |
 			EXYNOS5_USE_SC_COUNTER);
-		__raw_writel(tmp, exynos5_list_both_cnt_feed[i]);
+		pmu_raw_writel(tmp, exynos5_list_both_cnt_feed[i]);
 	}
 
 	/*
 	 * SKIP_DEACTIVATE_ACEACP_IN_PWDN_BITFIELD Enable
 	 */
-	tmp = __raw_readl(EXYNOS5_ARM_COMMON_OPTION);
+	tmp = pmu_raw_readl(EXYNOS5_ARM_COMMON_OPTION);
 	tmp |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
-	__raw_writel(tmp, EXYNOS5_ARM_COMMON_OPTION);
+	pmu_raw_writel(tmp, EXYNOS5_ARM_COMMON_OPTION);
 
 	/*
 	 * Disable WFI/WFE on XXX_OPTION
 	 */
 	for (i = 0 ; i < ARRAY_SIZE(exynos5_list_diable_wfi_wfe) ; i++) {
-		tmp = __raw_readl(exynos5_list_diable_wfi_wfe[i]);
+		tmp = pmu_raw_readl(exynos5_list_diable_wfi_wfe[i]);
 		tmp &= ~(EXYNOS5_OPTION_USE_STANDBYWFE |
 			 EXYNOS5_OPTION_USE_STANDBYWFI);
-		__raw_writel(tmp, exynos5_list_diable_wfi_wfe[i]);
+		pmu_raw_writel(tmp, exynos5_list_diable_wfi_wfe[i]);
 	}
 }
 
@@ -376,14 +375,14 @@ void exynos_sys_powerdown_conf(enum sys_powerdown mode)
 	if (soc_is_exynos5250())
 		exynos5_init_pmu();
 
-	for (i = 0; (exynos_pmu_config[i].reg != PMU_TABLE_END) ; i++)
-		__raw_writel(exynos_pmu_config[i].val[mode],
-				exynos_pmu_config[i].reg);
+	for (i = 0; (exynos_pmu_config[i].offset != PMU_TABLE_END) ; i++)
+		pmu_raw_writel(exynos_pmu_config[i].val[mode],
+				exynos_pmu_config[i].offset);
 
 	if (soc_is_exynos4412()) {
-		for (i = 0; exynos4412_pmu_config[i].reg != PMU_TABLE_END ; i++)
-			__raw_writel(exynos4412_pmu_config[i].val[mode],
-				exynos4412_pmu_config[i].reg);
+		for (i = 0; exynos4412_pmu_config[i].offset != PMU_TABLE_END ; i++)
+			pmu_raw_writel(exynos4412_pmu_config[i].val[mode],
+					exynos4412_pmu_config[i].offset);
 	}
 }
 
@@ -404,13 +403,13 @@ static int __init exynos_pmu_init(void)
 		 * When SYS_WDTRESET is set, watchdog timer reset request
 		 * is ignored by power management unit.
 		 */
-		value = __raw_readl(EXYNOS5_AUTO_WDTRESET_DISABLE);
+		value = pmu_raw_readl(EXYNOS5_AUTO_WDTRESET_DISABLE);
 		value &= ~EXYNOS5_SYS_WDTRESET;
-		__raw_writel(value, EXYNOS5_AUTO_WDTRESET_DISABLE);
+		pmu_raw_writel(value, EXYNOS5_AUTO_WDTRESET_DISABLE);
 
-		value = __raw_readl(EXYNOS5_MASK_WDTRESET_REQUEST);
+		value = pmu_raw_readl(EXYNOS5_MASK_WDTRESET_REQUEST);
 		value &= ~EXYNOS5_SYS_WDTRESET;
-		__raw_writel(value, EXYNOS5_MASK_WDTRESET_REQUEST);
+		pmu_raw_writel(value, EXYNOS5_MASK_WDTRESET_REQUEST);
 
 		exynos_pmu_config = exynos5250_pmu_config;
 		pr_info("EXYNOS5250 PMU Initialize\n");
diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h
index 1d13b08708f0..96a1569262b5 100644
--- a/arch/arm/mach-exynos/regs-pmu.h
+++ b/arch/arm/mach-exynos/regs-pmu.h
@@ -12,304 +12,298 @@
 #ifndef __ASM_ARCH_REGS_PMU_H
 #define __ASM_ARCH_REGS_PMU_H __FILE__
 
-#include <mach/map.h>
-
-#define S5P_PMUREG(x)				(S5P_VA_PMU + (x))
-#define S5P_SYSREG(x)				(S3C_VA_SYS + (x))
-
-#define S5P_CENTRAL_SEQ_CONFIGURATION		S5P_PMUREG(0x0200)
+#define S5P_CENTRAL_SEQ_CONFIGURATION		0x0200
 
 #define S5P_CENTRAL_LOWPWR_CFG			(1 << 16)
 
-#define S5P_CENTRAL_SEQ_OPTION			S5P_PMUREG(0x0208)
+#define S5P_CENTRAL_SEQ_OPTION			0x0208
 
 #define S5P_USE_STANDBY_WFI0			(1 << 16)
 #define S5P_USE_STANDBY_WFE0			(1 << 24)
 
-#define EXYNOS_SWRESET				S5P_PMUREG(0x0400)
-#define EXYNOS5440_SWRESET			S5P_PMUREG(0x00C4)
+#define EXYNOS_SWRESET				0x0400
+#define EXYNOS5440_SWRESET			0x00C4
 
-#define S5P_WAKEUP_STAT				S5P_PMUREG(0x0600)
-#define S5P_EINT_WAKEUP_MASK			S5P_PMUREG(0x0604)
-#define S5P_WAKEUP_MASK				S5P_PMUREG(0x0608)
+#define S5P_WAKEUP_STAT				0x0600
+#define S5P_EINT_WAKEUP_MASK			0x0604
+#define S5P_WAKEUP_MASK				0x0608
 
-#define S5P_INFORM0				S5P_PMUREG(0x0800)
-#define S5P_INFORM1				S5P_PMUREG(0x0804)
-#define S5P_INFORM5				S5P_PMUREG(0x0814)
-#define S5P_INFORM6				S5P_PMUREG(0x0818)
-#define S5P_INFORM7				S5P_PMUREG(0x081C)
-#define S5P_PMU_SPARE3				S5P_PMUREG(0x090C)
+#define S5P_INFORM0				0x0800
+#define S5P_INFORM1				0x0804
+#define S5P_INFORM5				0x0814
+#define S5P_INFORM6				0x0818
+#define S5P_INFORM7				0x081C
+#define S5P_PMU_SPARE3				0x090C
 
-#define S5P_ARM_CORE0_LOWPWR			S5P_PMUREG(0x1000)
-#define S5P_DIS_IRQ_CORE0			S5P_PMUREG(0x1004)
-#define S5P_DIS_IRQ_CENTRAL0			S5P_PMUREG(0x1008)
-#define S5P_ARM_CORE1_LOWPWR			S5P_PMUREG(0x1010)
-#define S5P_DIS_IRQ_CORE1			S5P_PMUREG(0x1014)
-#define S5P_DIS_IRQ_CENTRAL1			S5P_PMUREG(0x1018)
-#define S5P_ARM_COMMON_LOWPWR			S5P_PMUREG(0x1080)
-#define S5P_L2_0_LOWPWR				S5P_PMUREG(0x10C0)
-#define S5P_L2_1_LOWPWR				S5P_PMUREG(0x10C4)
-#define S5P_CMU_ACLKSTOP_LOWPWR			S5P_PMUREG(0x1100)
-#define S5P_CMU_SCLKSTOP_LOWPWR			S5P_PMUREG(0x1104)
-#define S5P_CMU_RESET_LOWPWR			S5P_PMUREG(0x110C)
-#define S5P_APLL_SYSCLK_LOWPWR			S5P_PMUREG(0x1120)
-#define S5P_MPLL_SYSCLK_LOWPWR			S5P_PMUREG(0x1124)
-#define S5P_VPLL_SYSCLK_LOWPWR			S5P_PMUREG(0x1128)
-#define S5P_EPLL_SYSCLK_LOWPWR			S5P_PMUREG(0x112C)
-#define S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR	S5P_PMUREG(0x1138)
-#define S5P_CMU_RESET_GPSALIVE_LOWPWR		S5P_PMUREG(0x113C)
-#define S5P_CMU_CLKSTOP_CAM_LOWPWR		S5P_PMUREG(0x1140)
-#define S5P_CMU_CLKSTOP_TV_LOWPWR		S5P_PMUREG(0x1144)
-#define S5P_CMU_CLKSTOP_MFC_LOWPWR		S5P_PMUREG(0x1148)
-#define S5P_CMU_CLKSTOP_G3D_LOWPWR		S5P_PMUREG(0x114C)
-#define S5P_CMU_CLKSTOP_LCD0_LOWPWR		S5P_PMUREG(0x1150)
-#define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR		S5P_PMUREG(0x1158)
-#define S5P_CMU_CLKSTOP_GPS_LOWPWR		S5P_PMUREG(0x115C)
-#define S5P_CMU_RESET_CAM_LOWPWR		S5P_PMUREG(0x1160)
-#define S5P_CMU_RESET_TV_LOWPWR			S5P_PMUREG(0x1164)
-#define S5P_CMU_RESET_MFC_LOWPWR		S5P_PMUREG(0x1168)
-#define S5P_CMU_RESET_G3D_LOWPWR		S5P_PMUREG(0x116C)
-#define S5P_CMU_RESET_LCD0_LOWPWR		S5P_PMUREG(0x1170)
-#define S5P_CMU_RESET_MAUDIO_LOWPWR		S5P_PMUREG(0x1178)
-#define S5P_CMU_RESET_GPS_LOWPWR		S5P_PMUREG(0x117C)
-#define S5P_TOP_BUS_LOWPWR			S5P_PMUREG(0x1180)
-#define S5P_TOP_RETENTION_LOWPWR		S5P_PMUREG(0x1184)
-#define S5P_TOP_PWR_LOWPWR			S5P_PMUREG(0x1188)
-#define S5P_LOGIC_RESET_LOWPWR			S5P_PMUREG(0x11A0)
-#define S5P_ONENAND_MEM_LOWPWR			S5P_PMUREG(0x11C0)
-#define S5P_G2D_ACP_MEM_LOWPWR			S5P_PMUREG(0x11C8)
-#define S5P_USBOTG_MEM_LOWPWR			S5P_PMUREG(0x11CC)
-#define S5P_HSMMC_MEM_LOWPWR			S5P_PMUREG(0x11D0)
-#define S5P_CSSYS_MEM_LOWPWR			S5P_PMUREG(0x11D4)
-#define S5P_SECSS_MEM_LOWPWR			S5P_PMUREG(0x11D8)
-#define S5P_PAD_RETENTION_DRAM_LOWPWR		S5P_PMUREG(0x1200)
-#define S5P_PAD_RETENTION_MAUDIO_LOWPWR		S5P_PMUREG(0x1204)
-#define S5P_PAD_RETENTION_GPIO_LOWPWR		S5P_PMUREG(0x1220)
-#define S5P_PAD_RETENTION_UART_LOWPWR		S5P_PMUREG(0x1224)
-#define S5P_PAD_RETENTION_MMCA_LOWPWR		S5P_PMUREG(0x1228)
-#define S5P_PAD_RETENTION_MMCB_LOWPWR		S5P_PMUREG(0x122C)
-#define S5P_PAD_RETENTION_EBIA_LOWPWR		S5P_PMUREG(0x1230)
-#define S5P_PAD_RETENTION_EBIB_LOWPWR		S5P_PMUREG(0x1234)
-#define S5P_PAD_RETENTION_ISOLATION_LOWPWR	S5P_PMUREG(0x1240)
-#define S5P_PAD_RETENTION_ALV_SEL_LOWPWR	S5P_PMUREG(0x1260)
-#define S5P_XUSBXTI_LOWPWR			S5P_PMUREG(0x1280)
-#define S5P_XXTI_LOWPWR				S5P_PMUREG(0x1284)
-#define S5P_EXT_REGULATOR_LOWPWR		S5P_PMUREG(0x12C0)
-#define S5P_GPIO_MODE_LOWPWR			S5P_PMUREG(0x1300)
-#define S5P_GPIO_MODE_MAUDIO_LOWPWR		S5P_PMUREG(0x1340)
-#define S5P_CAM_LOWPWR				S5P_PMUREG(0x1380)
-#define S5P_TV_LOWPWR				S5P_PMUREG(0x1384)
-#define S5P_MFC_LOWPWR				S5P_PMUREG(0x1388)
-#define S5P_G3D_LOWPWR				S5P_PMUREG(0x138C)
-#define S5P_LCD0_LOWPWR				S5P_PMUREG(0x1390)
-#define S5P_MAUDIO_LOWPWR			S5P_PMUREG(0x1398)
-#define S5P_GPS_LOWPWR				S5P_PMUREG(0x139C)
-#define S5P_GPS_ALIVE_LOWPWR			S5P_PMUREG(0x13A0)
+#define S5P_ARM_CORE0_LOWPWR			0x1000
+#define S5P_DIS_IRQ_CORE0			0x1004
+#define S5P_DIS_IRQ_CENTRAL0			0x1008
+#define S5P_ARM_CORE1_LOWPWR			0x1010
+#define S5P_DIS_IRQ_CORE1			0x1014
+#define S5P_DIS_IRQ_CENTRAL1			0x1018
+#define S5P_ARM_COMMON_LOWPWR			0x1080
+#define S5P_L2_0_LOWPWR				0x10C0
+#define S5P_L2_1_LOWPWR				0x10C4
+#define S5P_CMU_ACLKSTOP_LOWPWR			0x1100
+#define S5P_CMU_SCLKSTOP_LOWPWR			0x1104
+#define S5P_CMU_RESET_LOWPWR			0x110C
+#define S5P_APLL_SYSCLK_LOWPWR			0x1120
+#define S5P_MPLL_SYSCLK_LOWPWR			0x1124
+#define S5P_VPLL_SYSCLK_LOWPWR			0x1128
+#define S5P_EPLL_SYSCLK_LOWPWR			0x112C
+#define S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR	0x1138
+#define S5P_CMU_RESET_GPSALIVE_LOWPWR		0x113C
+#define S5P_CMU_CLKSTOP_CAM_LOWPWR		0x1140
+#define S5P_CMU_CLKSTOP_TV_LOWPWR		0x1144
+#define S5P_CMU_CLKSTOP_MFC_LOWPWR		0x1148
+#define S5P_CMU_CLKSTOP_G3D_LOWPWR		0x114C
+#define S5P_CMU_CLKSTOP_LCD0_LOWPWR		0x1150
+#define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR		0x1158
+#define S5P_CMU_CLKSTOP_GPS_LOWPWR		0x115C
+#define S5P_CMU_RESET_CAM_LOWPWR		0x1160
+#define S5P_CMU_RESET_TV_LOWPWR			0x1164
+#define S5P_CMU_RESET_MFC_LOWPWR		0x1168
+#define S5P_CMU_RESET_G3D_LOWPWR		0x116C
+#define S5P_CMU_RESET_LCD0_LOWPWR		0x1170
+#define S5P_CMU_RESET_MAUDIO_LOWPWR		0x1178
+#define S5P_CMU_RESET_GPS_LOWPWR		0x117C
+#define S5P_TOP_BUS_LOWPWR			0x1180
+#define S5P_TOP_RETENTION_LOWPWR		0x1184
+#define S5P_TOP_PWR_LOWPWR			0x1188
+#define S5P_LOGIC_RESET_LOWPWR			0x11A0
+#define S5P_ONENAND_MEM_LOWPWR			0x11C0
+#define S5P_G2D_ACP_MEM_LOWPWR			0x11C8
+#define S5P_USBOTG_MEM_LOWPWR			0x11CC
+#define S5P_HSMMC_MEM_LOWPWR			0x11D0
+#define S5P_CSSYS_MEM_LOWPWR			0x11D4
+#define S5P_SECSS_MEM_LOWPWR			0x11D8
+#define S5P_PAD_RETENTION_DRAM_LOWPWR		0x1200
+#define S5P_PAD_RETENTION_MAUDIO_LOWPWR		0x1204
+#define S5P_PAD_RETENTION_GPIO_LOWPWR		0x1220
+#define S5P_PAD_RETENTION_UART_LOWPWR		0x1224
+#define S5P_PAD_RETENTION_MMCA_LOWPWR		0x1228
+#define S5P_PAD_RETENTION_MMCB_LOWPWR		0x122C
+#define S5P_PAD_RETENTION_EBIA_LOWPWR		0x1230
+#define S5P_PAD_RETENTION_EBIB_LOWPWR		0x1234
+#define S5P_PAD_RETENTION_ISOLATION_LOWPWR	0x1240
+#define S5P_PAD_RETENTION_ALV_SEL_LOWPWR	0x1260
+#define S5P_XUSBXTI_LOWPWR			0x1280
+#define S5P_XXTI_LOWPWR				0x1284
+#define S5P_EXT_REGULATOR_LOWPWR		0x12C0
+#define S5P_GPIO_MODE_LOWPWR			0x1300
+#define S5P_GPIO_MODE_MAUDIO_LOWPWR		0x1340
+#define S5P_CAM_LOWPWR				0x1380
+#define S5P_TV_LOWPWR				0x1384
+#define S5P_MFC_LOWPWR				0x1388
+#define S5P_G3D_LOWPWR				0x138C
+#define S5P_LCD0_LOWPWR				0x1390
+#define S5P_MAUDIO_LOWPWR			0x1398
+#define S5P_GPS_LOWPWR				0x139C
+#define S5P_GPS_ALIVE_LOWPWR			0x13A0
 
-#define EXYNOS_ARM_CORE0_CONFIGURATION		S5P_PMUREG(0x2000)
+#define EXYNOS_ARM_CORE0_CONFIGURATION		0x2000
 #define EXYNOS_ARM_CORE_CONFIGURATION(_nr)	\
 			(EXYNOS_ARM_CORE0_CONFIGURATION + (0x80 * (_nr)))
 #define EXYNOS_ARM_CORE_STATUS(_nr)		\
 			(EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x4)
 
-#define EXYNOS_ARM_COMMON_CONFIGURATION		S5P_PMUREG(0x2500)
+#define EXYNOS_ARM_COMMON_CONFIGURATION		0x2500
 #define EXYNOS_COMMON_CONFIGURATION(_nr)	\
 			(EXYNOS_ARM_COMMON_CONFIGURATION + (0x80 * (_nr)))
 #define EXYNOS_COMMON_STATUS(_nr)		\
 			(EXYNOS_COMMON_CONFIGURATION(_nr) + 0x4)
+#define EXYNOS_COMMON_OPTION(_nr)		\
+			(EXYNOS_COMMON_CONFIGURATION(_nr) + 0x8)
 
-#define S5P_PAD_RET_MAUDIO_OPTION		S5P_PMUREG(0x3028)
-#define S5P_PAD_RET_GPIO_OPTION			S5P_PMUREG(0x3108)
-#define S5P_PAD_RET_UART_OPTION			S5P_PMUREG(0x3128)
-#define S5P_PAD_RET_MMCA_OPTION			S5P_PMUREG(0x3148)
-#define S5P_PAD_RET_MMCB_OPTION			S5P_PMUREG(0x3168)
-#define S5P_PAD_RET_EBIA_OPTION			S5P_PMUREG(0x3188)
-#define S5P_PAD_RET_EBIB_OPTION			S5P_PMUREG(0x31A8)
+#define S5P_PAD_RET_MAUDIO_OPTION		0x3028
+#define S5P_PAD_RET_GPIO_OPTION			0x3108
+#define S5P_PAD_RET_UART_OPTION			0x3128
+#define S5P_PAD_RET_MMCA_OPTION			0x3148
+#define S5P_PAD_RET_MMCB_OPTION			0x3168
+#define S5P_PAD_RET_EBIA_OPTION			0x3188
+#define S5P_PAD_RET_EBIB_OPTION			0x31A8
 
 #define S5P_CORE_LOCAL_PWR_EN			0x3
-#define S5P_INT_LOCAL_PWR_EN			0x7
 
 /* Only for EXYNOS4210 */
-#define S5P_CMU_CLKSTOP_LCD1_LOWPWR	S5P_PMUREG(0x1154)
-#define S5P_CMU_RESET_LCD1_LOWPWR	S5P_PMUREG(0x1174)
-#define S5P_MODIMIF_MEM_LOWPWR		S5P_PMUREG(0x11C4)
-#define S5P_PCIE_MEM_LOWPWR		S5P_PMUREG(0x11E0)
-#define S5P_SATA_MEM_LOWPWR		S5P_PMUREG(0x11E4)
-#define S5P_LCD1_LOWPWR			S5P_PMUREG(0x1394)
+#define S5P_CMU_CLKSTOP_LCD1_LOWPWR	0x1154
+#define S5P_CMU_RESET_LCD1_LOWPWR	0x1174
+#define S5P_MODIMIF_MEM_LOWPWR		0x11C4
+#define S5P_PCIE_MEM_LOWPWR		0x11E0
+#define S5P_SATA_MEM_LOWPWR		0x11E4
+#define S5P_LCD1_LOWPWR			0x1394
 
 /* Only for EXYNOS4x12 */
-#define S5P_ISP_ARM_LOWPWR			S5P_PMUREG(0x1050)
-#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR	S5P_PMUREG(0x1054)
-#define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR	S5P_PMUREG(0x1058)
-#define S5P_CMU_ACLKSTOP_COREBLK_LOWPWR		S5P_PMUREG(0x1110)
-#define S5P_CMU_SCLKSTOP_COREBLK_LOWPWR		S5P_PMUREG(0x1114)
-#define S5P_CMU_RESET_COREBLK_LOWPWR		S5P_PMUREG(0x111C)
-#define S5P_MPLLUSER_SYSCLK_LOWPWR		S5P_PMUREG(0x1130)
-#define S5P_CMU_CLKSTOP_ISP_LOWPWR		S5P_PMUREG(0x1154)
-#define S5P_CMU_RESET_ISP_LOWPWR		S5P_PMUREG(0x1174)
-#define S5P_TOP_BUS_COREBLK_LOWPWR		S5P_PMUREG(0x1190)
-#define S5P_TOP_RETENTION_COREBLK_LOWPWR	S5P_PMUREG(0x1194)
-#define S5P_TOP_PWR_COREBLK_LOWPWR		S5P_PMUREG(0x1198)
-#define S5P_OSCCLK_GATE_LOWPWR			S5P_PMUREG(0x11A4)
-#define S5P_LOGIC_RESET_COREBLK_LOWPWR		S5P_PMUREG(0x11B0)
-#define S5P_OSCCLK_GATE_COREBLK_LOWPWR		S5P_PMUREG(0x11B4)
-#define S5P_HSI_MEM_LOWPWR			S5P_PMUREG(0x11C4)
-#define S5P_ROTATOR_MEM_LOWPWR			S5P_PMUREG(0x11DC)
-#define S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR	S5P_PMUREG(0x123C)
-#define S5P_PAD_ISOLATION_COREBLK_LOWPWR	S5P_PMUREG(0x1250)
-#define S5P_GPIO_MODE_COREBLK_LOWPWR		S5P_PMUREG(0x1320)
-#define S5P_TOP_ASB_RESET_LOWPWR		S5P_PMUREG(0x1344)
-#define S5P_TOP_ASB_ISOLATION_LOWPWR		S5P_PMUREG(0x1348)
-#define S5P_ISP_LOWPWR				S5P_PMUREG(0x1394)
-#define S5P_DRAM_FREQ_DOWN_LOWPWR		S5P_PMUREG(0x13B0)
-#define S5P_DDRPHY_DLLOFF_LOWPWR		S5P_PMUREG(0x13B4)
-#define S5P_CMU_SYSCLK_ISP_LOWPWR		S5P_PMUREG(0x13B8)
-#define S5P_CMU_SYSCLK_GPS_LOWPWR		S5P_PMUREG(0x13BC)
-#define S5P_LPDDR_PHY_DLL_LOCK_LOWPWR		S5P_PMUREG(0x13C0)
+#define S5P_ISP_ARM_LOWPWR			0x1050
+#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR	0x1054
+#define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR	0x1058
+#define S5P_CMU_ACLKSTOP_COREBLK_LOWPWR		0x1110
+#define S5P_CMU_SCLKSTOP_COREBLK_LOWPWR		0x1114
+#define S5P_CMU_RESET_COREBLK_LOWPWR		0x111C
+#define S5P_MPLLUSER_SYSCLK_LOWPWR		0x1130
+#define S5P_CMU_CLKSTOP_ISP_LOWPWR		0x1154
+#define S5P_CMU_RESET_ISP_LOWPWR		0x1174
+#define S5P_TOP_BUS_COREBLK_LOWPWR		0x1190
+#define S5P_TOP_RETENTION_COREBLK_LOWPWR	0x1194
+#define S5P_TOP_PWR_COREBLK_LOWPWR		0x1198
+#define S5P_OSCCLK_GATE_LOWPWR			0x11A4
+#define S5P_LOGIC_RESET_COREBLK_LOWPWR		0x11B0
+#define S5P_OSCCLK_GATE_COREBLK_LOWPWR		0x11B4
+#define S5P_HSI_MEM_LOWPWR			0x11C4
+#define S5P_ROTATOR_MEM_LOWPWR			0x11DC
+#define S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR	0x123C
+#define S5P_PAD_ISOLATION_COREBLK_LOWPWR	0x1250
+#define S5P_GPIO_MODE_COREBLK_LOWPWR		0x1320
+#define S5P_TOP_ASB_RESET_LOWPWR		0x1344
+#define S5P_TOP_ASB_ISOLATION_LOWPWR		0x1348
+#define S5P_ISP_LOWPWR				0x1394
+#define S5P_DRAM_FREQ_DOWN_LOWPWR		0x13B0
+#define S5P_DDRPHY_DLLOFF_LOWPWR		0x13B4
+#define S5P_CMU_SYSCLK_ISP_LOWPWR		0x13B8
+#define S5P_CMU_SYSCLK_GPS_LOWPWR		0x13BC
+#define S5P_LPDDR_PHY_DLL_LOCK_LOWPWR		0x13C0
 
-#define S5P_ARM_L2_0_OPTION			S5P_PMUREG(0x2608)
-#define S5P_ARM_L2_1_OPTION			S5P_PMUREG(0x2628)
-#define S5P_ONENAND_MEM_OPTION			S5P_PMUREG(0x2E08)
-#define S5P_HSI_MEM_OPTION			S5P_PMUREG(0x2E28)
-#define S5P_G2D_ACP_MEM_OPTION			S5P_PMUREG(0x2E48)
-#define S5P_USBOTG_MEM_OPTION			S5P_PMUREG(0x2E68)
-#define S5P_HSMMC_MEM_OPTION			S5P_PMUREG(0x2E88)
-#define S5P_CSSYS_MEM_OPTION			S5P_PMUREG(0x2EA8)
-#define S5P_SECSS_MEM_OPTION			S5P_PMUREG(0x2EC8)
-#define S5P_ROTATOR_MEM_OPTION			S5P_PMUREG(0x2F48)
+#define S5P_ARM_L2_0_OPTION			0x2608
+#define S5P_ARM_L2_1_OPTION			0x2628
+#define S5P_ONENAND_MEM_OPTION			0x2E08
+#define S5P_HSI_MEM_OPTION			0x2E28
+#define S5P_G2D_ACP_MEM_OPTION			0x2E48
+#define S5P_USBOTG_MEM_OPTION			0x2E68
+#define S5P_HSMMC_MEM_OPTION			0x2E88
+#define S5P_CSSYS_MEM_OPTION			0x2EA8
+#define S5P_SECSS_MEM_OPTION			0x2EC8
+#define S5P_ROTATOR_MEM_OPTION			0x2F48
 
 /* Only for EXYNOS4412 */
-#define S5P_ARM_CORE2_LOWPWR			S5P_PMUREG(0x1020)
-#define S5P_DIS_IRQ_CORE2			S5P_PMUREG(0x1024)
-#define S5P_DIS_IRQ_CENTRAL2			S5P_PMUREG(0x1028)
-#define S5P_ARM_CORE3_LOWPWR			S5P_PMUREG(0x1030)
-#define S5P_DIS_IRQ_CORE3			S5P_PMUREG(0x1034)
-#define S5P_DIS_IRQ_CENTRAL3			S5P_PMUREG(0x1038)
+#define S5P_ARM_CORE2_LOWPWR			0x1020
+#define S5P_DIS_IRQ_CORE2			0x1024
+#define S5P_DIS_IRQ_CENTRAL2			0x1028
+#define S5P_ARM_CORE3_LOWPWR			0x1030
+#define S5P_DIS_IRQ_CORE3			0x1034
+#define S5P_DIS_IRQ_CENTRAL3			0x1038
 
 /* For EXYNOS5 */
 
-#define EXYNOS5_SYS_I2C_CFG					S5P_SYSREG(0x0234)
-
-#define EXYNOS5_AUTO_WDTRESET_DISABLE				S5P_PMUREG(0x0408)
-#define EXYNOS5_MASK_WDTRESET_REQUEST				S5P_PMUREG(0x040C)
+#define EXYNOS5_AUTO_WDTRESET_DISABLE				0x0408
+#define EXYNOS5_MASK_WDTRESET_REQUEST				0x040C
 
 #define EXYNOS5_SYS_WDTRESET					(1 << 20)
 
-#define EXYNOS5_ARM_CORE0_SYS_PWR_REG				S5P_PMUREG(0x1000)
-#define EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG		S5P_PMUREG(0x1004)
-#define EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG		S5P_PMUREG(0x1008)
-#define EXYNOS5_ARM_CORE1_SYS_PWR_REG				S5P_PMUREG(0x1010)
-#define EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG		S5P_PMUREG(0x1014)
-#define EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG		S5P_PMUREG(0x1018)
-#define EXYNOS5_FSYS_ARM_SYS_PWR_REG				S5P_PMUREG(0x1040)
-#define EXYNOS5_DIS_IRQ_FSYS_ARM_CENTRAL_SYS_PWR_REG		S5P_PMUREG(0x1048)
-#define EXYNOS5_ISP_ARM_SYS_PWR_REG				S5P_PMUREG(0x1050)
-#define EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG		S5P_PMUREG(0x1054)
-#define EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG		S5P_PMUREG(0x1058)
-#define EXYNOS5_ARM_COMMON_SYS_PWR_REG				S5P_PMUREG(0x1080)
-#define EXYNOS5_ARM_L2_SYS_PWR_REG				S5P_PMUREG(0x10C0)
-#define EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG			S5P_PMUREG(0x1100)
-#define EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG			S5P_PMUREG(0x1104)
-#define EXYNOS5_CMU_RESET_SYS_PWR_REG				S5P_PMUREG(0x110C)
-#define EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG			S5P_PMUREG(0x1120)
-#define EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG			S5P_PMUREG(0x1124)
-#define EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG			S5P_PMUREG(0x112C)
-#define EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG			S5P_PMUREG(0x1130)
-#define EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG			S5P_PMUREG(0x1134)
-#define EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG			S5P_PMUREG(0x1138)
-#define EXYNOS5_APLL_SYSCLK_SYS_PWR_REG				S5P_PMUREG(0x1140)
-#define EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG				S5P_PMUREG(0x1144)
-#define EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG				S5P_PMUREG(0x1148)
-#define EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG				S5P_PMUREG(0x114C)
-#define EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG				S5P_PMUREG(0x1150)
-#define EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG				S5P_PMUREG(0x1154)
-#define EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG			S5P_PMUREG(0x1164)
-#define EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG			S5P_PMUREG(0x1170)
-#define EXYNOS5_TOP_BUS_SYS_PWR_REG				S5P_PMUREG(0x1180)
-#define EXYNOS5_TOP_RETENTION_SYS_PWR_REG			S5P_PMUREG(0x1184)
-#define EXYNOS5_TOP_PWR_SYS_PWR_REG				S5P_PMUREG(0x1188)
-#define EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG			S5P_PMUREG(0x1190)
-#define EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG		S5P_PMUREG(0x1194)
-#define EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG			S5P_PMUREG(0x1198)
-#define EXYNOS5_LOGIC_RESET_SYS_PWR_REG				S5P_PMUREG(0x11A0)
-#define EXYNOS5_OSCCLK_GATE_SYS_PWR_REG				S5P_PMUREG(0x11A4)
-#define EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG			S5P_PMUREG(0x11B0)
-#define EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG			S5P_PMUREG(0x11B4)
-#define EXYNOS5_USBOTG_MEM_SYS_PWR_REG				S5P_PMUREG(0x11C0)
-#define EXYNOS5_G2D_MEM_SYS_PWR_REG				S5P_PMUREG(0x11C8)
-#define EXYNOS5_USBDRD_MEM_SYS_PWR_REG				S5P_PMUREG(0x11CC)
-#define EXYNOS5_SDMMC_MEM_SYS_PWR_REG				S5P_PMUREG(0x11D0)
-#define EXYNOS5_CSSYS_MEM_SYS_PWR_REG				S5P_PMUREG(0x11D4)
-#define EXYNOS5_SECSS_MEM_SYS_PWR_REG				S5P_PMUREG(0x11D8)
-#define EXYNOS5_ROTATOR_MEM_SYS_PWR_REG				S5P_PMUREG(0x11DC)
-#define EXYNOS5_INTRAM_MEM_SYS_PWR_REG				S5P_PMUREG(0x11E0)
-#define EXYNOS5_INTROM_MEM_SYS_PWR_REG				S5P_PMUREG(0x11E4)
-#define EXYNOS5_JPEG_MEM_SYS_PWR_REG				S5P_PMUREG(0x11E8)
-#define EXYNOS5_HSI_MEM_SYS_PWR_REG				S5P_PMUREG(0x11EC)
-#define EXYNOS5_MCUIOP_MEM_SYS_PWR_REG				S5P_PMUREG(0x11F4)
-#define EXYNOS5_SATA_MEM_SYS_PWR_REG				S5P_PMUREG(0x11FC)
-#define EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG			S5P_PMUREG(0x1200)
-#define EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG			S5P_PMUREG(0x1204)
-#define EXYNOS5_PAD_RETENTION_EFNAND_SYS_PWR_REG		S5P_PMUREG(0x1208)
-#define EXYNOS5_PAD_RETENTION_GPIO_SYS_PWR_REG			S5P_PMUREG(0x1220)
-#define EXYNOS5_PAD_RETENTION_UART_SYS_PWR_REG			S5P_PMUREG(0x1224)
-#define EXYNOS5_PAD_RETENTION_MMCA_SYS_PWR_REG			S5P_PMUREG(0x1228)
-#define EXYNOS5_PAD_RETENTION_MMCB_SYS_PWR_REG			S5P_PMUREG(0x122C)
-#define EXYNOS5_PAD_RETENTION_EBIA_SYS_PWR_REG			S5P_PMUREG(0x1230)
-#define EXYNOS5_PAD_RETENTION_EBIB_SYS_PWR_REG			S5P_PMUREG(0x1234)
-#define EXYNOS5_PAD_RETENTION_SPI_SYS_PWR_REG			S5P_PMUREG(0x1238)
-#define EXYNOS5_PAD_RETENTION_GPIO_SYSMEM_SYS_PWR_REG		S5P_PMUREG(0x123C)
-#define EXYNOS5_PAD_ISOLATION_SYS_PWR_REG			S5P_PMUREG(0x1240)
-#define EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG		S5P_PMUREG(0x1250)
-#define EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG				S5P_PMUREG(0x1260)
-#define EXYNOS5_XUSBXTI_SYS_PWR_REG				S5P_PMUREG(0x1280)
-#define EXYNOS5_XXTI_SYS_PWR_REG				S5P_PMUREG(0x1284)
-#define EXYNOS5_EXT_REGULATOR_SYS_PWR_REG			S5P_PMUREG(0x12C0)
-#define EXYNOS5_GPIO_MODE_SYS_PWR_REG				S5P_PMUREG(0x1300)
-#define EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG			S5P_PMUREG(0x1320)
-#define EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG			S5P_PMUREG(0x1340)
-#define EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG			S5P_PMUREG(0x1344)
-#define EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG			S5P_PMUREG(0x1348)
-#define EXYNOS5_GSCL_SYS_PWR_REG				S5P_PMUREG(0x1400)
-#define EXYNOS5_ISP_SYS_PWR_REG					S5P_PMUREG(0x1404)
-#define EXYNOS5_MFC_SYS_PWR_REG					S5P_PMUREG(0x1408)
-#define EXYNOS5_G3D_SYS_PWR_REG					S5P_PMUREG(0x140C)
-#define EXYNOS5_DISP1_SYS_PWR_REG				S5P_PMUREG(0x1414)
-#define EXYNOS5_MAU_SYS_PWR_REG					S5P_PMUREG(0x1418)
-#define EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG			S5P_PMUREG(0x1480)
-#define EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG			S5P_PMUREG(0x1484)
-#define EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG			S5P_PMUREG(0x1488)
-#define EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG			S5P_PMUREG(0x148C)
-#define EXYNOS5_CMU_CLKSTOP_DISP1_SYS_PWR_REG			S5P_PMUREG(0x1494)
-#define EXYNOS5_CMU_CLKSTOP_MAU_SYS_PWR_REG			S5P_PMUREG(0x1498)
-#define EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG			S5P_PMUREG(0x14C0)
-#define EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG			S5P_PMUREG(0x14C4)
-#define EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG			S5P_PMUREG(0x14C8)
-#define EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG			S5P_PMUREG(0x14CC)
-#define EXYNOS5_CMU_SYSCLK_DISP1_SYS_PWR_REG			S5P_PMUREG(0x14D4)
-#define EXYNOS5_CMU_SYSCLK_MAU_SYS_PWR_REG			S5P_PMUREG(0x14D8)
-#define EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG			S5P_PMUREG(0x1580)
-#define EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG			S5P_PMUREG(0x1584)
-#define EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG			S5P_PMUREG(0x1588)
-#define EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG			S5P_PMUREG(0x158C)
-#define EXYNOS5_CMU_RESET_DISP1_SYS_PWR_REG			S5P_PMUREG(0x1594)
-#define EXYNOS5_CMU_RESET_MAU_SYS_PWR_REG			S5P_PMUREG(0x1598)
+#define EXYNOS5_ARM_CORE0_SYS_PWR_REG				0x1000
+#define EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG		0x1004
+#define EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG		0x1008
+#define EXYNOS5_ARM_CORE1_SYS_PWR_REG				0x1010
+#define EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG		0x1014
+#define EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG		0x1018
+#define EXYNOS5_FSYS_ARM_SYS_PWR_REG				0x1040
+#define EXYNOS5_DIS_IRQ_FSYS_ARM_CENTRAL_SYS_PWR_REG		0x1048
+#define EXYNOS5_ISP_ARM_SYS_PWR_REG				0x1050
+#define EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG		0x1054
+#define EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG		0x1058
+#define EXYNOS5_ARM_COMMON_SYS_PWR_REG				0x1080
+#define EXYNOS5_ARM_L2_SYS_PWR_REG				0x10C0
+#define EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG			0x1100
+#define EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG			0x1104
+#define EXYNOS5_CMU_RESET_SYS_PWR_REG				0x110C
+#define EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG			0x1120
+#define EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG			0x1124
+#define EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG			0x112C
+#define EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG			0x1130
+#define EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG			0x1134
+#define EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG			0x1138
+#define EXYNOS5_APLL_SYSCLK_SYS_PWR_REG				0x1140
+#define EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG				0x1144
+#define EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG				0x1148
+#define EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG				0x114C
+#define EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG				0x1150
+#define EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG				0x1154
+#define EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG			0x1164
+#define EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG			0x1170
+#define EXYNOS5_TOP_BUS_SYS_PWR_REG				0x1180
+#define EXYNOS5_TOP_RETENTION_SYS_PWR_REG			0x1184
+#define EXYNOS5_TOP_PWR_SYS_PWR_REG				0x1188
+#define EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG			0x1190
+#define EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG		0x1194
+#define EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG			0x1198
+#define EXYNOS5_LOGIC_RESET_SYS_PWR_REG				0x11A0
+#define EXYNOS5_OSCCLK_GATE_SYS_PWR_REG				0x11A4
+#define EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG			0x11B0
+#define EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG			0x11B4
+#define EXYNOS5_USBOTG_MEM_SYS_PWR_REG				0x11C0
+#define EXYNOS5_G2D_MEM_SYS_PWR_REG				0x11C8
+#define EXYNOS5_USBDRD_MEM_SYS_PWR_REG				0x11CC
+#define EXYNOS5_SDMMC_MEM_SYS_PWR_REG				0x11D0
+#define EXYNOS5_CSSYS_MEM_SYS_PWR_REG				0x11D4
+#define EXYNOS5_SECSS_MEM_SYS_PWR_REG				0x11D8
+#define EXYNOS5_ROTATOR_MEM_SYS_PWR_REG				0x11DC
+#define EXYNOS5_INTRAM_MEM_SYS_PWR_REG				0x11E0
+#define EXYNOS5_INTROM_MEM_SYS_PWR_REG				0x11E4
+#define EXYNOS5_JPEG_MEM_SYS_PWR_REG				0x11E8
+#define EXYNOS5_HSI_MEM_SYS_PWR_REG				0x11EC
+#define EXYNOS5_MCUIOP_MEM_SYS_PWR_REG				0x11F4
+#define EXYNOS5_SATA_MEM_SYS_PWR_REG				0x11FC
+#define EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG			0x1200
+#define EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG			0x1204
+#define EXYNOS5_PAD_RETENTION_EFNAND_SYS_PWR_REG		0x1208
+#define EXYNOS5_PAD_RETENTION_GPIO_SYS_PWR_REG			0x1220
+#define EXYNOS5_PAD_RETENTION_UART_SYS_PWR_REG			0x1224
+#define EXYNOS5_PAD_RETENTION_MMCA_SYS_PWR_REG			0x1228
+#define EXYNOS5_PAD_RETENTION_MMCB_SYS_PWR_REG			0x122C
+#define EXYNOS5_PAD_RETENTION_EBIA_SYS_PWR_REG			0x1230
+#define EXYNOS5_PAD_RETENTION_EBIB_SYS_PWR_REG			0x1234
+#define EXYNOS5_PAD_RETENTION_SPI_SYS_PWR_REG			0x1238
+#define EXYNOS5_PAD_RETENTION_GPIO_SYSMEM_SYS_PWR_REG		0x123C
+#define EXYNOS5_PAD_ISOLATION_SYS_PWR_REG			0x1240
+#define EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG		0x1250
+#define EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG				0x1260
+#define EXYNOS5_XUSBXTI_SYS_PWR_REG				0x1280
+#define EXYNOS5_XXTI_SYS_PWR_REG				0x1284
+#define EXYNOS5_EXT_REGULATOR_SYS_PWR_REG			0x12C0
+#define EXYNOS5_GPIO_MODE_SYS_PWR_REG				0x1300
+#define EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG			0x1320
+#define EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG			0x1340
+#define EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG			0x1344
+#define EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG			0x1348
+#define EXYNOS5_GSCL_SYS_PWR_REG				0x1400
+#define EXYNOS5_ISP_SYS_PWR_REG					0x1404
+#define EXYNOS5_MFC_SYS_PWR_REG					0x1408
+#define EXYNOS5_G3D_SYS_PWR_REG					0x140C
+#define EXYNOS5_DISP1_SYS_PWR_REG				0x1414
+#define EXYNOS5_MAU_SYS_PWR_REG					0x1418
+#define EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG			0x1480
+#define EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG			0x1484
+#define EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG			0x1488
+#define EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG			0x148C
+#define EXYNOS5_CMU_CLKSTOP_DISP1_SYS_PWR_REG			0x1494
+#define EXYNOS5_CMU_CLKSTOP_MAU_SYS_PWR_REG			0x1498
+#define EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG			0x14C0
+#define EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG			0x14C4
+#define EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG			0x14C8
+#define EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG			0x14CC
+#define EXYNOS5_CMU_SYSCLK_DISP1_SYS_PWR_REG			0x14D4
+#define EXYNOS5_CMU_SYSCLK_MAU_SYS_PWR_REG			0x14D8
+#define EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG			0x1580
+#define EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG			0x1584
+#define EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG			0x1588
+#define EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG			0x158C
+#define EXYNOS5_CMU_RESET_DISP1_SYS_PWR_REG			0x1594
+#define EXYNOS5_CMU_RESET_MAU_SYS_PWR_REG			0x1598
 
-#define EXYNOS5_ARM_CORE0_OPTION				S5P_PMUREG(0x2008)
-#define EXYNOS5_ARM_CORE1_OPTION				S5P_PMUREG(0x2088)
-#define EXYNOS5_FSYS_ARM_OPTION					S5P_PMUREG(0x2208)
-#define EXYNOS5_ISP_ARM_OPTION					S5P_PMUREG(0x2288)
-#define EXYNOS5_ARM_COMMON_OPTION				S5P_PMUREG(0x2408)
-#define EXYNOS5_ARM_L2_OPTION					S5P_PMUREG(0x2608)
-#define EXYNOS5_TOP_PWR_OPTION					S5P_PMUREG(0x2C48)
-#define EXYNOS5_TOP_PWR_SYSMEM_OPTION				S5P_PMUREG(0x2CC8)
-#define EXYNOS5_JPEG_MEM_OPTION					S5P_PMUREG(0x2F48)
-#define EXYNOS5_GSCL_OPTION					S5P_PMUREG(0x4008)
-#define EXYNOS5_ISP_OPTION					S5P_PMUREG(0x4028)
-#define EXYNOS5_MFC_OPTION					S5P_PMUREG(0x4048)
-#define EXYNOS5_G3D_OPTION					S5P_PMUREG(0x4068)
-#define EXYNOS5_DISP1_OPTION					S5P_PMUREG(0x40A8)
-#define EXYNOS5_MAU_OPTION					S5P_PMUREG(0x40C8)
+#define EXYNOS5_ARM_CORE0_OPTION				0x2008
+#define EXYNOS5_ARM_CORE1_OPTION				0x2088
+#define EXYNOS5_FSYS_ARM_OPTION					0x2208
+#define EXYNOS5_ISP_ARM_OPTION					0x2288
+#define EXYNOS5_ARM_COMMON_OPTION				0x2408
+#define EXYNOS5_ARM_L2_OPTION					0x2608
+#define EXYNOS5_TOP_PWR_OPTION					0x2C48
+#define EXYNOS5_TOP_PWR_SYSMEM_OPTION				0x2CC8
+#define EXYNOS5_JPEG_MEM_OPTION					0x2F48
+#define EXYNOS5_GSCL_OPTION					0x4008
+#define EXYNOS5_ISP_OPTION					0x4028
+#define EXYNOS5_MFC_OPTION					0x4048
+#define EXYNOS5_G3D_OPTION					0x4068
+#define EXYNOS5_DISP1_OPTION					0x40A8
+#define EXYNOS5_MAU_OPTION					0x40C8
 
 #define EXYNOS5_USE_SC_FEEDBACK					(1 << 1)
 #define EXYNOS5_USE_SC_COUNTER					(1 << 0)
@@ -323,4 +317,13 @@
 
 #define EXYNOS5420_SWRESET_KFC_SEL				0x3
 
+#include <asm/cputype.h>
+#define MAX_CPUS_IN_CLUSTER	4
+
+static inline unsigned int exynos_pmu_cpunr(unsigned int mpidr)
+{
+	return ((MPIDR_AFFINITY_LEVEL(mpidr, 1) * MAX_CPUS_IN_CLUSTER)
+		 + MPIDR_AFFINITY_LEVEL(mpidr, 0));
+}
+
 #endif /* __ASM_ARCH_REGS_PMU_H */
diff --git a/arch/arm/mach-exynos/regs-sys.h b/arch/arm/mach-exynos/regs-sys.h
new file mode 100644
index 000000000000..84332b0dd7a6
--- /dev/null
+++ b/arch/arm/mach-exynos/regs-sys.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *             http://www.samsung.com
+ *
+ * EXYNOS - system register definition
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_SYS_H
+#define __ASM_ARCH_REGS_SYS_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_SYSREG(x)                          (S3C_VA_SYS + (x))
+
+/* For EXYNOS5 */
+#define EXYNOS5_SYS_I2C_CFG                    S5P_SYSREG(0x0234)
+
+#endif /* __ASM_ARCH_REGS_SYS_H */
diff --git a/arch/arm/plat-samsung/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h
index c18678610bc0..f5b9d3ff9cd4 100644
--- a/arch/arm/plat-samsung/include/plat/map-s5p.h
+++ b/arch/arm/plat-samsung/include/plat/map-s5p.h
@@ -15,7 +15,6 @@
 
 #define S5P_VA_CHIPID		S3C_ADDR(0x02000000)
 #define S5P_VA_CMU		S3C_ADDR(0x02100000)
-#define S5P_VA_PMU		S3C_ADDR(0x02180000)
 #define S5P_VA_GPIO		S3C_ADDR(0x02200000)
 #define S5P_VA_GPIO1		S5P_VA_GPIO
 #define S5P_VA_GPIO2		S3C_ADDR(0x02240000)
diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
index b6d69e899f5d..2f6b33ea6e08 100644
--- a/drivers/cpuidle/Kconfig.arm
+++ b/drivers/cpuidle/Kconfig.arm
@@ -9,7 +9,7 @@ config ARM_ARMADA_370_XP_CPUIDLE
 
 config ARM_BIG_LITTLE_CPUIDLE
 	bool "Support for ARM big.LITTLE processors"
-	depends on ARCH_VEXPRESS_TC2_PM
+	depends on ARCH_VEXPRESS_TC2_PM || ARCH_EXYNOS
 	select ARM_CPU_SUSPEND
 	select CPU_IDLE_MULTIPLE_DRIVERS
 	help
diff --git a/drivers/cpuidle/cpuidle-big_little.c b/drivers/cpuidle/cpuidle-big_little.c
index b45fc6249041..344d79fa3407 100644
--- a/drivers/cpuidle/cpuidle-big_little.c
+++ b/drivers/cpuidle/cpuidle-big_little.c
@@ -163,14 +163,24 @@ static int __init bl_idle_driver_init(struct cpuidle_driver *drv, int cpu_id)
 	return 0;
 }
 
+static const struct of_device_id compatible_machine_match[] = {
+	{ .compatible = "arm,vexpress,v2p-ca15_a7" },
+	{ .compatible = "samsung,exynos5420" },
+	{},
+};
+
 static int __init bl_idle_init(void)
 {
 	int ret;
+	struct device_node *root = of_find_node_by_path("/");
+
+	if (!root)
+		return -ENODEV;
 
 	/*
 	 * Initialize the driver just for a compliant set of machines
 	 */
-	if (!of_machine_is_compatible("arm,vexpress,v2p-ca15_a7"))
+	if (!of_match_node(compatible_machine_match, root))
 		return -ENODEV;
 	/*
 	 * For now the differentiation between little and big cores