Merge master.kernel.org:~rmk/linux-2.6-arm.git

65 files changed, 1847 insertions, 1133 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 620f2ca94ed2..8752751f9985 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -223,7 +223,9 @@ source "arch/arm/mach-pxa/Kconfig"
 
 source "arch/arm/mach-sa1100/Kconfig"
 
-source "arch/arm/mach-omap/Kconfig"
+source "arch/arm/plat-omap/Kconfig"
+
+source "arch/arm/mach-omap1/Kconfig"
 
 source "arch/arm/mach-s3c2410/Kconfig"
 
@@ -514,7 +516,7 @@ config XIP_PHYS_ADDR
 
 endmenu
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP1)
 
 menu "CPU Frequency scaling"
 
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index eb933dcafba0..67f1453ade05 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -91,7 +91,8 @@ textaddr-$(CONFIG_ARCH_FORTUNET)   := 0xc0008000
  machine-$(CONFIG_ARCH_IOP3XX)	   := iop3xx
  machine-$(CONFIG_ARCH_IXP4XX)	   := ixp4xx
  machine-$(CONFIG_ARCH_IXP2000)    := ixp2000
- machine-$(CONFIG_ARCH_OMAP)	   := omap
+ machine-$(CONFIG_ARCH_OMAP1)	   := omap1
+  incdir-$(CONFIG_ARCH_OMAP)	   := omap
  machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410
  machine-$(CONFIG_ARCH_LH7A40X)	   := lh7a40x
  machine-$(CONFIG_ARCH_VERSATILE)  := versatile
@@ -142,6 +143,9 @@ core-$(CONFIG_FPE_NWFPE)	+= arch/arm/nwfpe/
 core-$(CONFIG_FPE_FASTFPE)	+= $(FASTFPE_OBJ)
 core-$(CONFIG_VFP)		+= arch/arm/vfp/
 
+# If we have a common platform directory, then include it in the build.
+core-$(CONFIG_ARCH_OMAP)	+= arch/arm/plat-omap/
+
 drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
 drivers-$(CONFIG_ARCH_CLPS7500)	+= drivers/acorn/char/
 drivers-$(CONFIG_ARCH_L7200)	+= drivers/acorn/char/
diff --git a/arch/arm/configs/enp2611_defconfig b/arch/arm/configs/enp2611_defconfig
index b8c51ee7f1bb..f67ca01b4982 100644
--- a/arch/arm/configs/enp2611_defconfig
+++ b/arch/arm/configs/enp2611_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-git6
-# Sat Jun 25 00:57:29 2005
+# Linux kernel version: 2.6.13-rc2
+# Thu Jul  7 16:41:21 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -137,6 +137,7 @@ CONFIG_PCI_NAMES=y
 #
 # CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -345,10 +346,9 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -363,17 +363,8 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 # CONFIG_IP_TCPDIAG is not set
 # CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# TCP congestion control
-#
+# CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
@@ -931,4 +922,3 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-# CONFIG_TEXTSEARCH is not set
diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixdp2400_defconfig
index 3cfbe2ec29ca..5c6c928215d0 100644
--- a/arch/arm/configs/ixdp2400_defconfig
+++ b/arch/arm/configs/ixdp2400_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-git6
-# Sat Jun 25 00:58:38 2005
+# Linux kernel version: 2.6.13-rc2
+# Thu Jul  7 16:49:01 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -138,6 +138,7 @@ CONFIG_PCI_NAMES=y
 #
 # CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -346,10 +347,9 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -364,17 +364,8 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 # CONFIG_IP_TCPDIAG is not set
 # CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# TCP congestion control
-#
+# CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
@@ -932,4 +923,3 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-# CONFIG_TEXTSEARCH is not set
diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig
index 5c87e8e6969b..6dc40f6be0ef 100644
--- a/arch/arm/configs/ixdp2401_defconfig
+++ b/arch/arm/configs/ixdp2401_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-git6
-# Sat Jun 25 00:59:35 2005
+# Linux kernel version: 2.6.13-rc2
+# Thu Jul  7 16:49:08 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -138,6 +138,7 @@ CONFIG_PCI_NAMES=y
 #
 # CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -346,10 +347,9 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -364,17 +364,8 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_IP_TCPDIAG=y
 # CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# TCP congestion control
-#
+# CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
@@ -933,4 +924,3 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-# CONFIG_TEXTSEARCH is not set
diff --git a/arch/arm/configs/ixdp2800_defconfig b/arch/arm/configs/ixdp2800_defconfig
index 3cb561a551cb..d2bb0b7153fe 100644
--- a/arch/arm/configs/ixdp2800_defconfig
+++ b/arch/arm/configs/ixdp2800_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-git6
-# Sat Jun 25 01:00:27 2005
+# Linux kernel version: 2.6.13-rc2
+# Thu Jul  7 16:49:20 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -138,6 +138,7 @@ CONFIG_PCI_NAMES=y
 #
 # CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -346,10 +347,9 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -364,17 +364,8 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 # CONFIG_IP_TCPDIAG is not set
 # CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# TCP congestion control
-#
+# CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
@@ -932,4 +923,3 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-# CONFIG_TEXTSEARCH is not set
diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig
index b1e162f29cb9..2d6f960e3395 100644
--- a/arch/arm/configs/ixdp2801_defconfig
+++ b/arch/arm/configs/ixdp2801_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-git6
-# Sat Jun 25 01:01:18 2005
+# Linux kernel version: 2.6.13-rc2
+# Thu Jul  7 16:49:13 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -138,6 +138,7 @@ CONFIG_PCI_NAMES=y
 #
 # CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -346,10 +347,9 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -364,17 +364,8 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 # CONFIG_IP_TCPDIAG is not set
 # CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# TCP congestion control
-#
+# CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
@@ -933,4 +924,3 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-# CONFIG_TEXTSEARCH is not set
diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig
index 4e58d9341bce..24955263b096 100644
--- a/arch/arm/configs/omap_h2_1610_defconfig
+++ b/arch/arm/configs/omap_h2_1610_defconfig
@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 17:52:41 2005
+# Linux kernel version: 2.6.13-rc2
+# Fri Jul  8 04:49:34 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
 CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
 
 #
 # Code maturity level options
@@ -17,6 +16,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -33,8 +33,9 @@ CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -82,10 +83,28 @@ CONFIG_ARCH_OMAP=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
 
 #
 # TI OMAP Implementations
 #
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
 
 #
 # OMAP Core Type
@@ -93,7 +112,6 @@ CONFIG_ARCH_OMAP=y
 # CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP1510 is not set
 CONFIG_ARCH_OMAP16XX=y
-CONFIG_ARCH_OMAP_OTG=y
 
 #
 # OMAP Board Type
@@ -101,21 +119,14 @@ CONFIG_ARCH_OMAP_OTG=y
 # CONFIG_MACH_OMAP_INNOVATOR is not set
 CONFIG_MACH_OMAP_H2=y
 # CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_H4 is not set
 # CONFIG_MACH_OMAP_OSK is not set
 # CONFIG_MACH_OMAP_GENERIC is not set
 
 #
-# OMAP Feature Selections
+# OMAP CPU Speed
 #
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_216MHZ is not set
 CONFIG_OMAP_ARM_192MHZ=y
 # CONFIG_OMAP_ARM_168MHZ is not set
 # CONFIG_OMAP_ARM_120MHZ is not set
@@ -145,6 +156,7 @@ CONFIG_ARM_THUMB=y
 #
 # Bus support
 #
+CONFIG_ISA_DMA_API=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -154,7 +166,16 @@ CONFIG_ARM_THUMB=y
 #
 # Kernel Features
 #
+# CONFIG_SMP is not set
 CONFIG_PREEMPT=y
+CONFIG_NO_IDLE_HZ=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
 
@@ -167,6 +188,22 @@ CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=0801 ro init=/bin/sh"
 # CONFIG_XIP_KERNEL is not set
 
 #
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+
+#
 # Floating point emulation
 #
 
@@ -202,7 +239,6 @@ CONFIG_PM=y
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-CONFIG_DEBUG_DRIVER=y
 
 #
 # Memory Technology Devices (MTD)
@@ -292,7 +328,6 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -327,6 +362,7 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -356,6 +392,7 @@ CONFIG_SCSI_PROC_FS=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -375,12 +412,12 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -395,6 +432,8 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_IP_TCPDIAG=y
 # CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
@@ -442,6 +481,7 @@ CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -518,7 +558,6 @@ CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
@@ -567,13 +606,11 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
-# CONFIG_TCG_TPM is not set
 
 #
 # I2C support
@@ -604,7 +641,9 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_FSCPOS is not set
@@ -620,6 +659,7 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
@@ -627,15 +667,21 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 
 #
 # Other I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 CONFIG_ISP1301_OMAP=y
+CONFIG_TPS65010=y
+# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -663,8 +709,10 @@ CONFIG_FB=y
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -677,11 +725,13 @@ CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 # CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
 # CONFIG_FONT_PEARL_8x8 is not set
 # CONFIG_FONT_ACORN_8x8 is not set
 # CONFIG_FONT_MINI_4x6 is not set
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
 
 #
 # Logo configuration
@@ -729,14 +779,14 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 #
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_PXA2XX is not set
 # CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_SA1100 is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_OMAP=y
 CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
 # CONFIG_USB_GADGET_DUALSPEED is not set
 # CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=y
@@ -755,6 +805,7 @@ CONFIG_USB_ETH_RNDIS=y
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
@@ -791,7 +842,6 @@ CONFIG_FAT_DEFAULT_CODEPAGE=437
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
@@ -828,12 +878,14 @@ CONFIG_CRAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
@@ -903,24 +955,11 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_USER is not set
 
 #
 # Security options
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index 4b9d841e04c1..45b18658499f 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -23,7 +23,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/bitops.h>
-#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 #include <linux/mm.h>
 
 #include <asm/types.h>
@@ -125,19 +125,6 @@ static struct map_desc ixp2000_io_desc[] __initdata = {
 	}
 };
 
-static struct uart_port ixp2000_serial_port = {
-	.membase	= (char *)(IXP2000_UART_VIRT_BASE + 3),
-	.mapbase	= IXP2000_UART_PHYS_BASE + 3,
-	.irq		= IRQ_IXP2000_UART,
-	.flags		= UPF_SKIP_TEST,
-	.iotype		= UPIO_MEM,
-	.regshift	= 2,
-	.uartclk	= 50000000,
-	.line		= 0,
-	.type		= PORT_XSCALE,
-	.fifosize	= 16
-};
-
 void __init ixp2000_map_io(void)
 {
 	extern unsigned int processor_id;
@@ -157,12 +144,50 @@ void __init ixp2000_map_io(void)
 	}
 
 	iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc));
-	early_serial_setup(&ixp2000_serial_port);
 
 	/* Set slowport to 8-bit mode.  */
 	ixp2000_reg_write(IXP2000_SLOWPORT_FRM, 1);
 }
 
+
+/*************************************************************************
+ * Serial port support for IXP2000
+ *************************************************************************/
+static struct plat_serial8250_port ixp2000_serial_port[] = {
+	{
+		.mapbase	= IXP2000_UART_PHYS_BASE,
+		.membase	= (char *)(IXP2000_UART_VIRT_BASE + 3),
+		.irq		= IRQ_IXP2000_UART,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 50000000,
+	},
+	{ },
+};
+
+static struct resource ixp2000_uart_resource = {
+	.start		= IXP2000_UART_PHYS_BASE,
+	.end		= IXP2000_UART_PHYS_BASE + 0xffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device ixp2000_serial_device = {
+	.name		= "serial8250",
+	.id		= 0,
+	.dev		= {
+		.platform_data		= ixp2000_serial_port,
+	},
+	.num_resources	= 1,
+	.resource	= &ixp2000_uart_resource,
+};
+
+void __init ixp2000_uart_init(void)
+{
+	platform_device_register(&ixp2000_serial_device);
+}
+
+
 /*************************************************************************
  * Timer-tick functions for IXP2000
  *************************************************************************/
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index b7ebf3898fc5..9aa54de44740 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -219,6 +219,7 @@ static struct platform_device *enp2611_devices[] __initdata = {
 static void __init enp2611_init_machine(void)
 {
 	platform_add_devices(enp2611_devices, ARRAY_SIZE(enp2611_devices));
+	ixp2000_uart_init();
 }
 
 
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
index 5e4380747b53..a43369ad876c 100644
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -303,5 +303,6 @@ void __init ixdp2x00_init_machine(void)
 	gpio_line_config(IXDP2X00_GPIO_I2C_ENABLE, GPIO_OUT);
 
 	platform_add_devices(ixdp2x00_devices, ARRAY_SIZE(ixdp2x00_devices));
+	ixp2000_uart_init();
 }
 
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index c73588743ee1..43447dad1657 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -370,6 +370,7 @@ static void __init ixdp2x01_init_machine(void)
 		((*IXDP2X01_CPLD_FLASH_REG & IXDP2X01_CPLD_FLASH_BANK_MASK) + 1);
 
 	platform_add_devices(ixdp2x01_devices, ARRAY_SIZE(ixdp2x01_devices));
+	ixp2000_uart_init();
 }
 
 
diff --git a/arch/arm/mach-omap/Kconfig b/arch/arm/mach-omap/Kconfig
deleted file mode 100644
index 9e42efa66b2b..000000000000
--- a/arch/arm/mach-omap/Kconfig
+++ /dev/null
@@ -1,221 +0,0 @@
-if ARCH_OMAP
-
-menu "TI OMAP Implementations"
-
-comment "OMAP Core Type"
-
-config ARCH_OMAP730
-	depends on ARCH_OMAP
-	bool "OMAP730 Based System"
-	select ARCH_OMAP_OTG
-
-config ARCH_OMAP1510
-	depends on ARCH_OMAP
-	default y
-	bool "OMAP1510 Based System"
-
-config ARCH_OMAP16XX
-	depends on ARCH_OMAP
-	bool "OMAP16XX Based System"
-	select ARCH_OMAP_OTG
-
-config ARCH_OMAP_OTG
-	bool
-
-comment "OMAP Board Type"
-
-config MACH_OMAP_INNOVATOR
-	bool "TI Innovator"
-	depends on ARCH_OMAP1510 || ARCH_OMAP16XX
-	help
-          TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
-          have such a board.
-
-config MACH_OMAP_H2
-	bool "TI H2 Support"
-	depends on ARCH_OMAP16XX
-    	help
-	  TI OMAP 1610/1611B H2 board support. Say Y here if you have such
-	  a board.
-
-config MACH_OMAP_H3
-	bool "TI H3 Support"
-	depends on ARCH_OMAP16XX
-    	help
-	  TI OMAP 1710 H3 board support. Say Y here if you have such
-	  a board.
-
-config MACH_OMAP_H4
-	bool "TI H4 Support"
-	depends on ARCH_OMAP16XX
-    	help
-	  TI OMAP 1610 H4 board support. Say Y here if you have such
-	  a board.
-
-config MACH_OMAP_OSK
-	bool "TI OSK Support"
-	depends on ARCH_OMAP16XX
-    	help
-	  TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
-          if you have such a board.
-
-config MACH_OMAP_PERSEUS2
-	bool "TI Perseus2"
-	depends on ARCH_OMAP730
-    	help
-	  Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
-	  a board.
-
-config MACH_VOICEBLUE
-	bool "Voiceblue"
-	depends on ARCH_OMAP1510
-	help
-	  Support for Voiceblue GSM/VoIP gateway. Say Y here if you have such
-	  board.
-
-config MACH_NETSTAR
-	bool "NetStar"
-	depends on ARCH_OMAP1510
-	help
-	  Support for NetStar PBX. Say Y here if you have such a board.
-
-config MACH_OMAP_GENERIC
-	bool "Generic OMAP board"
-	depends on ARCH_OMAP1510 || ARCH_OMAP16XX
-	help
-          Support for generic OMAP-1510, 1610 or 1710 board with
-          no FPGA. Can be used as template for porting Linux to
-          custom OMAP boards. Say Y here if you have a custom
-          board.
-
-comment "OMAP Feature Selections"
-
-#config OMAP_BOOT_TAG
-#	bool "OMAP bootloader information passing"
-#        depends on ARCH_OMAP
-#        default n
-#        help
-#          Say Y, if you have a bootloader which passes information
-#          about your board and its peripheral configuration.
-
-config OMAP_MUX
-	bool "OMAP multiplexing support"
-        depends on ARCH_OMAP
-	default y
-        help
-          Pin multiplexing support for OMAP boards. If your bootloader
-          sets the multiplexing correctly, say N. Otherwise, or if unsure,
-          say Y.
-
-config OMAP_MUX_DEBUG
-	bool "Multiplexing debug output"
-        depends on OMAP_MUX
-        default n
-        help
-          Makes the multiplexing functions print out a lot of debug info.
-          This is useful if you want to find out the correct values of the
-          multiplexing registers.
-
-config OMAP_MUX_WARNINGS
-	bool "Warn about pins the bootloader didn't set up"
-        depends on OMAP_MUX
-        default y
-        help
-	  Choose Y here to warn whenever driver initialization logic needs
-	  to change the pin multiplexing setup.  When there are no warnings
-	  printed, it's safe to deselect OMAP_MUX for your product.
-
-choice
-        prompt "System timer"
-	default OMAP_MPU_TIMER
-
-config OMAP_MPU_TIMER
-	bool "Use mpu timer"
-	help
-	  Select this option if you want to use the OMAP mpu timer. This
-	  timer provides more intra-tick resolution than the 32KHz timer,
-	  but consumes more power.
-
-config OMAP_32K_TIMER
-	bool "Use 32KHz timer"
-	depends on ARCH_OMAP16XX
-	help
-	  Select this option if you want to enable the OMAP 32KHz timer.
-	  This timer saves power compared to the OMAP_MPU_TIMER, and has
-	  support for no tick during idle. The 32KHz timer provides less
-	  intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
-	  currently only available for OMAP-16xx.
-
-endchoice
-
-config OMAP_32K_TIMER_HZ
-       int "Kernel internal timer frequency for 32KHz timer"
-       range 32 1024
-       depends on OMAP_32K_TIMER
-       default "128"
-       help
-	  Kernel internal timer frequency should be a divisor of 32768,
-	  such as 64 or 128.
-
-choice
-	prompt "Low-level debug console UART"
-	depends on ARCH_OMAP
-	default OMAP_LL_DEBUG_UART1
-
-config OMAP_LL_DEBUG_UART1
-	bool "UART1"
-
-config OMAP_LL_DEBUG_UART2
-	bool "UART2"
-
-config OMAP_LL_DEBUG_UART3
-	bool "UART3"
-
-endchoice
-
-config OMAP_ARM_195MHZ
-	bool "OMAP ARM 195 MHz CPU"
-	depends on ARCH_OMAP730
-	help
-          Enable 195MHz clock for OMAP CPU. If unsure, say N.
-
-config OMAP_ARM_192MHZ
-	bool "OMAP ARM 192 MHz CPU"
-	depends on ARCH_OMAP16XX
-	help
-          Enable 192MHz clock for OMAP CPU. If unsure, say N.
-
-config OMAP_ARM_182MHZ
-	bool "OMAP ARM 182 MHz CPU"
-	depends on ARCH_OMAP730
-	help
-          Enable 182MHz clock for OMAP CPU. If unsure, say N.
-
-config OMAP_ARM_168MHZ
-	bool "OMAP ARM 168 MHz CPU"
-	depends on ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730
-	help
-          Enable 168MHz clock for OMAP CPU. If unsure, say N.
-
-config OMAP_ARM_120MHZ
-	bool "OMAP ARM 120 MHz CPU"
-	depends on ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730
-	help
-          Enable 120MHz clock for OMAP CPU. If unsure, say N.
-
-config OMAP_ARM_60MHZ
-	bool "OMAP ARM 60 MHz CPU"
-	depends on ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730
-        default y
-	help
-          Enable 60MHz clock for OMAP CPU. If unsure, say Y.
-
-config OMAP_ARM_30MHZ
-	bool "OMAP ARM 30 MHz CPU"
-	depends on ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730
-	help
-          Enable 30MHz clock for OMAP CPU. If unsure, say N.
-
-endmenu
-
-endif
diff --git a/arch/arm/mach-omap/Makefile b/arch/arm/mach-omap/Makefile
deleted file mode 100644
index 4cafb11d2c02..000000000000
--- a/arch/arm/mach-omap/Makefile
+++ /dev/null
@@ -1,40 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Common support
-obj-y := common.o time.o irq.o dma.o clock.o mux.o gpio.o mcbsp.o usb.o
-obj-m :=
-obj-n :=
-obj-  :=
-led-y := leds.o
-
-# Specific board support
-obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o
-obj-$(CONFIG_MACH_OMAP_INNOVATOR) += board-innovator.o
-obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
-obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o
-obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o
-obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o
-obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o
-obj-$(CONFIG_MACH_NETSTAR) += board-netstar.o
-
-# OCPI interconnect support for 1710, 1610 and 5912
-obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
-
-# LEDs support
-led-$(CONFIG_MACH_OMAP_H2) += leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_INNOVATOR) += leds-innovator.o
-led-$(CONFIG_MACH_OMAP_PERSEUS2) += leds-h2p2-debug.o
-obj-$(CONFIG_LEDS) += $(led-y)
-
-# Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o
-
-ifeq ($(CONFIG_ARCH_OMAP1510),y)
-# Innovator-1510 FPGA
-obj-$(CONFIG_MACH_OMAP_INNOVATOR) += fpga.o
-endif
-
-# kgdb support
-obj-$(CONFIG_KGDB_SERIAL)	+= kgdb-serial.o
diff --git a/arch/arm/mach-omap/common.c b/arch/arm/mach-omap/common.c
deleted file mode 100644
index 265cde48586f..000000000000
--- a/arch/arm/mach-omap/common.c
+++ /dev/null
@@ -1,549 +0,0 @@
-/*
- * linux/arch/arm/mach-omap/common.c
- *
- * Code common to all OMAP machines.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pm.h>
-#include <linux/console.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-
-#include <asm/hardware.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-#include <asm/hardware/clock.h>
-#include <asm/io.h>
-#include <asm/mach-types.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
-
-#include "clock.h"
-
-#define DEBUG 1
-
-struct omap_id {
-	u16	jtag_id;	/* Used to determine OMAP type */
-	u8	die_rev;	/* Processor revision */
-	u32	omap_id;	/* OMAP revision */
-	u32	type;		/* Cpu id bits [31:08], cpu class bits [07:00] */
-};
-
-/* Register values to detect the OMAP version */
-static struct omap_id omap_ids[] __initdata = {
-	{ .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
-	{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
-	{ .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
-	{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000},
-	{ .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000},
-	{ .jtag_id = 0xb576, .die_rev = 0x3, .omap_id = 0x03320100, .type = 0x16100c00},
-	{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320200, .type = 0x16100d00},
-	{ .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00},
-	{ .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00},
-	{ .jtag_id = 0xb576, .die_rev = 0x1, .omap_id = 0x03320100, .type = 0x16110000},
-	{ .jtag_id = 0xb58c, .die_rev = 0x2, .omap_id = 0x03320200, .type = 0x16110b00},
-	{ .jtag_id = 0xb58c, .die_rev = 0x3, .omap_id = 0x03320200, .type = 0x16110c00},
-	{ .jtag_id = 0xb65f, .die_rev = 0x0, .omap_id = 0x03320400, .type = 0x16212300},
-	{ .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320400, .type = 0x16212300},
-	{ .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x16212300},
-	{ .jtag_id = 0xb5f7, .die_rev = 0x0, .omap_id = 0x03330000, .type = 0x17100000},
-	{ .jtag_id = 0xb5f7, .die_rev = 0x1, .omap_id = 0x03330100, .type = 0x17100000},
-	{ .jtag_id = 0xb5f7, .die_rev = 0x2, .omap_id = 0x03330100, .type = 0x17100000},
-};
-
-/*
- * Get OMAP type from PROD_ID.
- * 1710 has the PROD_ID in bits 15:00, not in 16:01 as documented in TRM.
- * 1510 PROD_ID is empty, and 1610 PROD_ID does not make sense.
- * Undocumented register in TEST BLOCK is used as fallback; This seems to
- * work on 1510, 1610 & 1710. The official way hopefully will work in future
- * processors.
- */
-static u16 __init omap_get_jtag_id(void)
-{
-	u32 prod_id, omap_id;
-
-	prod_id = omap_readl(OMAP_PRODUCTION_ID_1);
-	omap_id = omap_readl(OMAP32_ID_1);
-
-	/* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730 */
-	if (((prod_id >> 20) == 0) || (prod_id == omap_id))
-		prod_id = 0;
-	else
-		prod_id &= 0xffff;
-
-	if (prod_id)
-		return prod_id;
-
-	/* Use OMAP32_ID_1 as fallback */
-	prod_id = ((omap_id >> 12) & 0xffff);
-
-	return prod_id;
-}
-
-/*
- * Get OMAP revision from DIE_REV.
- * Early 1710 processors may have broken OMAP_DIE_ID, it contains PROD_ID.
- * Undocumented register in the TEST BLOCK is used as fallback.
- * REVISIT: This does not seem to work on 1510
- */
-static u8 __init omap_get_die_rev(void)
-{
-	u32 die_rev;
-
-	die_rev = omap_readl(OMAP_DIE_ID_1);
-
-	/* Check for broken OMAP_DIE_ID on early 1710 */
-	if (((die_rev >> 12) & 0xffff) == omap_get_jtag_id())
-		die_rev = 0;
-
-	die_rev = (die_rev >> 17) & 0xf;
-	if (die_rev)
-		return die_rev;
-
-	die_rev = (omap_readl(OMAP32_ID_1) >> 28) & 0xf;
-
-	return die_rev;
-}
-
-static void __init omap_check_revision(void)
-{
-	int i;
-	u16 jtag_id;
-	u8 die_rev;
-	u32 omap_id;
-	u8 cpu_type;
-
-	jtag_id = omap_get_jtag_id();
-	die_rev = omap_get_die_rev();
-	omap_id = omap_readl(OMAP32_ID_0);
-
-#ifdef DEBUG
-	printk("OMAP_DIE_ID_0: 0x%08x\n", omap_readl(OMAP_DIE_ID_0));
-	printk("OMAP_DIE_ID_1: 0x%08x DIE_REV: %i\n",
-		omap_readl(OMAP_DIE_ID_1),
-	       (omap_readl(OMAP_DIE_ID_1) >> 17) & 0xf);
-	printk("OMAP_PRODUCTION_ID_0: 0x%08x\n", omap_readl(OMAP_PRODUCTION_ID_0));
-	printk("OMAP_PRODUCTION_ID_1: 0x%08x JTAG_ID: 0x%04x\n",
-		omap_readl(OMAP_PRODUCTION_ID_1),
-		omap_readl(OMAP_PRODUCTION_ID_1) & 0xffff);
-	printk("OMAP32_ID_0: 0x%08x\n", omap_readl(OMAP32_ID_0));
-	printk("OMAP32_ID_1: 0x%08x\n", omap_readl(OMAP32_ID_1));
-	printk("JTAG_ID: 0x%04x DIE_REV: %i\n", jtag_id, die_rev);
-#endif
-
-	system_serial_high = omap_readl(OMAP_DIE_ID_0);
-	system_serial_low = omap_readl(OMAP_DIE_ID_1);
-
-	/* First check only the major version in a safe way */
-	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
-		if (jtag_id == (omap_ids[i].jtag_id)) {
-			system_rev = omap_ids[i].type;
-			break;
-		}
-	}
-
-	/* Check if we can find the die revision */
-	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
-		if (jtag_id == omap_ids[i].jtag_id && die_rev == omap_ids[i].die_rev) {
-			system_rev = omap_ids[i].type;
-			break;
-		}
-	}
-
-	/* Finally check also the omap_id */
-	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
-		if (jtag_id == omap_ids[i].jtag_id
-		    && die_rev == omap_ids[i].die_rev
-		    && omap_id == omap_ids[i].omap_id) {
-			system_rev = omap_ids[i].type;
-			break;
-		}
-	}
-
-	/* Add the cpu class info (7xx, 15xx, 16xx, 24xx) */
-	cpu_type = system_rev >> 24;
-
-	switch (cpu_type) {
-	case 0x07:
-		system_rev |= 0x07;
-		break;
-	case 0x15:
-		system_rev |= 0x15;
-		break;
-	case 0x16:
-	case 0x17:
-		system_rev |= 0x16;
-		break;
-	case 0x24:
-		system_rev |= 0x24;
-		break;
-	default:
-		printk("Unknown OMAP cpu type: 0x%02x\n", cpu_type);
-	}
-
-	printk("OMAP%04x", system_rev >> 16);
-	if ((system_rev >> 8) & 0xff)
-		printk("%x", (system_rev >> 8) & 0xff);
-	printk(" revision %i handled as %02xxx id: %08x%08x\n",
-	       die_rev, system_rev & 0xff, system_serial_low,
-	       system_serial_high);
-}
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP I/O mapping
- *
- * The machine specific code may provide the extra mapping besides the
- * default mapping provided here.
- * ----------------------------------------------------------------------------
- */
-
-static struct map_desc omap_io_desc[] __initdata = {
- { IO_VIRT,      	IO_PHYS,             IO_SIZE,        	   MT_DEVICE },
-};
-
-#ifdef CONFIG_ARCH_OMAP730
-static struct map_desc omap730_io_desc[] __initdata = {
- { OMAP730_DSP_BASE,    OMAP730_DSP_START,    OMAP730_DSP_SIZE,    MT_DEVICE },
- { OMAP730_DSPREG_BASE, OMAP730_DSPREG_START, OMAP730_DSPREG_SIZE, MT_DEVICE },
- { OMAP730_SRAM_BASE,   OMAP730_SRAM_START,   OMAP730_SRAM_SIZE,   MT_DEVICE }
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP1510
-static struct map_desc omap1510_io_desc[] __initdata = {
- { OMAP1510_DSP_BASE,    OMAP1510_DSP_START,    OMAP1510_DSP_SIZE,    MT_DEVICE },
- { OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_START, OMAP1510_DSPREG_SIZE, MT_DEVICE },
- { OMAP1510_SRAM_BASE,   OMAP1510_SRAM_START,   OMAP1510_SRAM_SIZE,   MT_DEVICE }
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-static struct map_desc omap1610_io_desc[] __initdata = {
- { OMAP16XX_DSP_BASE,    OMAP16XX_DSP_START,    OMAP16XX_DSP_SIZE,    MT_DEVICE },
- { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE },
- { OMAP16XX_SRAM_BASE,   OMAP16XX_SRAM_START,   OMAP1610_SRAM_SIZE,   MT_DEVICE }
-};
-
-static struct map_desc omap5912_io_desc[] __initdata = {
- { OMAP16XX_DSP_BASE,    OMAP16XX_DSP_START,    OMAP16XX_DSP_SIZE,    MT_DEVICE },
- { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE },
-/*
- * The OMAP5912 has 250kByte internal SRAM. Because the mapping is baseed on page
- * size (4kByte), it seems that the last 2kByte (=0x800) of the 250kByte are not mapped.
- * Add additional 2kByte (0x800) so that the last page is mapped and the last 2kByte
- * can be used.
- */
- { OMAP16XX_SRAM_BASE,   OMAP16XX_SRAM_START,   OMAP5912_SRAM_SIZE + 0x800,   MT_DEVICE }
-};
-#endif
-
-static int initialized = 0;
-
-static void __init _omap_map_io(void)
-{
-	initialized = 1;
-
-	/* We have to initialize the IO space mapping before we can run
-	 * cpu_is_omapxxx() macros. */
-	iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
-	omap_check_revision();
-
-#ifdef CONFIG_ARCH_OMAP730
-	if (cpu_is_omap730()) {
-		iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc));
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP1510
-	if (cpu_is_omap1510()) {
-		iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
-	}
-#endif
-#if defined(CONFIG_ARCH_OMAP16XX)
-	if (cpu_is_omap1610() || cpu_is_omap1710()) {
-		iotable_init(omap1610_io_desc, ARRAY_SIZE(omap1610_io_desc));
-	}
-	if (cpu_is_omap5912()) {
-		iotable_init(omap5912_io_desc, ARRAY_SIZE(omap5912_io_desc));
-	}
-#endif
-
-	/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
-	 * on a Posted Write in the TIPB Bridge".
-	 */
-	omap_writew(0x0, MPU_PUBLIC_TIPB_CNTL);
-	omap_writew(0x0, MPU_PRIVATE_TIPB_CNTL);
-
-	/* Must init clocks early to assure that timer interrupt works
-	 */
-	clk_init();
-}
-
-/*
- * This should only get called from board specific init
- */
-void omap_map_io(void)
-{
-	if (!initialized)
-		_omap_map_io();
-}
-
-static inline unsigned int omap_serial_in(struct plat_serial8250_port *up,
-					  int offset)
-{
-	offset <<= up->regshift;
-	return (unsigned int)__raw_readb(up->membase + offset);
-}
-
-static inline void omap_serial_outp(struct plat_serial8250_port *p, int offset,
-				    int value)
-{
-	offset <<= p->regshift;
-	__raw_writeb(value, p->membase + offset);
-}
-
-/*
- * Internal UARTs need to be initialized for the 8250 autoconfig to work
- * properly. Note that the TX watermark initialization may not be needed
- * once the 8250.c watermark handling code is merged.
- */
-static void __init omap_serial_reset(struct plat_serial8250_port *p)
-{
-	omap_serial_outp(p, UART_OMAP_MDR1, 0x07);	/* disable UART */
-	omap_serial_outp(p, UART_OMAP_SCR, 0x08);	/* TX watermark */
-	omap_serial_outp(p, UART_OMAP_MDR1, 0x00);	/* enable UART */
-
-	if (!cpu_is_omap1510()) {
-		omap_serial_outp(p, UART_OMAP_SYSC, 0x01);
-		while (!(omap_serial_in(p, UART_OMAP_SYSC) & 0x01));
-	}
-}
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.membase	= (char*)IO_ADDRESS(OMAP_UART1_BASE),
-		.mapbase	= (unsigned long)OMAP_UART1_BASE,
-		.irq		= INT_UART1,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= OMAP16XX_BASE_BAUD * 16,
-	},
-	{
-		.membase	= (char*)IO_ADDRESS(OMAP_UART2_BASE),
-		.mapbase	= (unsigned long)OMAP_UART2_BASE,
-		.irq		= INT_UART2,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= OMAP16XX_BASE_BAUD * 16,
-	},
-	{
-		.membase	= (char*)IO_ADDRESS(OMAP_UART3_BASE),
-		.mapbase	= (unsigned long)OMAP_UART3_BASE,
-		.irq		= INT_UART3,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= OMAP16XX_BASE_BAUD * 16,
-	},
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= 0,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
-/*
- * Note that on Innovator-1510 UART2 pins conflict with USB2.
- * By default UART2 does not work on Innovator-1510 if you have
- * USB OHCI enabled. To use UART2, you must disable USB2 first.
- */
-void __init omap_serial_init(int ports[OMAP_MAX_NR_PORTS])
-{
-	int i;
-
-	if (cpu_is_omap730()) {
-		serial_platform_data[0].regshift = 0;
-		serial_platform_data[1].regshift = 0;
-		serial_platform_data[0].irq = INT_730_UART_MODEM_1;
-		serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2;
-	}
-
-	if (cpu_is_omap1510()) {
-		serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16;
-		serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16;
-		serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
-	}
-
-	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
-		unsigned char reg;
-
-		if (ports[i] == 0) {
-			serial_platform_data[i].membase = 0;
-			serial_platform_data[i].mapbase = 0;
-			continue;
-		}
-
-		switch (i) {
-		case 0:
-			if (cpu_is_omap1510()) {
-				omap_cfg_reg(UART1_TX);
-				omap_cfg_reg(UART1_RTS);
-				if (machine_is_omap_innovator()) {
-					reg = fpga_read(OMAP1510_FPGA_POWER);
-					reg |= OMAP1510_FPGA_PCR_COM1_EN;
-					fpga_write(reg, OMAP1510_FPGA_POWER);
-					udelay(10);
-				}
-			}
-			break;
-		case 1:
-			if (cpu_is_omap1510()) {
-				omap_cfg_reg(UART2_TX);
-				omap_cfg_reg(UART2_RTS);
-				if (machine_is_omap_innovator()) {
-					reg = fpga_read(OMAP1510_FPGA_POWER);
-					reg |= OMAP1510_FPGA_PCR_COM2_EN;
-					fpga_write(reg, OMAP1510_FPGA_POWER);
-					udelay(10);
-				}
-			}
-			break;
-		case 2:
-			if (cpu_is_omap1510()) {
-				omap_cfg_reg(UART3_TX);
-				omap_cfg_reg(UART3_RX);
-			}
-			if (cpu_is_omap1710()) {
-				clk_enable(clk_get(0, "uart3_ck"));
-			}
-			break;
-		}
-		omap_serial_reset(&serial_platform_data[i]);
-	}
-}
-
-static int __init omap_init(void)
-{
-	return platform_device_register(&serial_device);
-}
-arch_initcall(omap_init);
-
-#define NO_LENGTH_CHECK 0xffffffff
-
-extern int omap_bootloader_tag_len;
-extern u8 omap_bootloader_tag[];
-
-struct omap_board_config_kernel *omap_board_config;
-int omap_board_config_size = 0;
-
-static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
-{
-	struct omap_board_config_kernel *kinfo = NULL;
-	int i;
-
-#ifdef CONFIG_OMAP_BOOT_TAG
-	struct omap_board_config_entry *info = NULL;
-
-	if (omap_bootloader_tag_len > 4)
-		info = (struct omap_board_config_entry *) omap_bootloader_tag;
-	while (info != NULL) {
-		u8 *next;
-
-		if (info->tag == tag) {
-			if (skip == 0)
-				break;
-			skip--;
-		}
-
-		if ((info->len & 0x03) != 0) {
-			/* We bail out to avoid an alignment fault */
-			printk(KERN_ERR "OMAP peripheral config: Length (%d) not word-aligned (tag %04x)\n",
-			       info->len, info->tag);
-			return NULL;
-		}
-		next = (u8 *) info + sizeof(*info) + info->len;
-		if (next >= omap_bootloader_tag + omap_bootloader_tag_len)
-			info = NULL;
-		else
-			info = (struct omap_board_config_entry *) next;
-	}
-	if (info != NULL) {
-		/* Check the length as a lame attempt to check for
-		 * binary inconsistancy. */
-		if (len != NO_LENGTH_CHECK) {
-			/* Word-align len */
-			if (len & 0x03)
-				len = (len + 3) & ~0x03;
-			if (info->len != len) {
-				printk(KERN_ERR "OMAP peripheral config: Length mismatch with tag %x (want %d, got %d)\n",
-				       tag, len, info->len);
-				return NULL;
-			}
-		}
-		if (len_out != NULL)
-			*len_out = info->len;
-		return info->data;
-	}
-#endif
-	/* Try to find the config from the board-specific structures
-	 * in the kernel. */
-	for (i = 0; i < omap_board_config_size; i++) {
-		if (omap_board_config[i].tag == tag) {
-			kinfo = &omap_board_config[i];
-			break;
-		}
-	}
-	if (kinfo == NULL)
-		return NULL;
-	return kinfo->data;
-}
-
-const void *__omap_get_config(u16 tag, size_t len, int nr)
-{
-        return get_config(tag, len, nr, NULL);
-}
-EXPORT_SYMBOL(__omap_get_config);
-
-const void *omap_get_var_config(u16 tag, size_t *len)
-{
-        return get_config(tag, NO_LENGTH_CHECK, 0, len);
-}
-EXPORT_SYMBOL(omap_get_var_config);
-
-static int __init omap_add_serial_console(void)
-{
-	const struct omap_uart_config *info;
-
-	info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
-	if (info != NULL && info->console_uart) {
-		static char speed[11], *opt = NULL;
-
-		if (info->console_speed) {
-			snprintf(speed, sizeof(speed), "%u", info->console_speed);
-			opt = speed;
-		}
-		return add_preferred_console("ttyS", info->console_uart - 1, opt);
-	}
-	return 0;
-}
-console_initcall(omap_add_serial_console);
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
new file mode 100644
index 000000000000..7408ac94f771
--- /dev/null
+++ b/arch/arm/mach-omap1/Kconfig
@@ -0,0 +1,144 @@
+comment "OMAP Core Type"
+	depends on ARCH_OMAP1
+
+config ARCH_OMAP730
+	depends on ARCH_OMAP1
+	bool "OMAP730 Based System"
+	select ARCH_OMAP_OTG
+
+config ARCH_OMAP1510
+	depends on ARCH_OMAP1
+	default y
+	bool "OMAP1510 Based System"
+
+config ARCH_OMAP16XX
+	depends on ARCH_OMAP1
+	bool "OMAP16xx Based System"
+	select ARCH_OMAP_OTG
+
+comment "OMAP Board Type"
+	depends on ARCH_OMAP1
+
+config MACH_OMAP_INNOVATOR
+	bool "TI Innovator"
+	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX)
+	help
+          TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
+          have such a board.
+
+config MACH_OMAP_H2
+	bool "TI H2 Support"
+	depends on ARCH_OMAP1 && ARCH_OMAP16XX
+    	help
+	  TI OMAP 1610/1611B H2 board support. Say Y here if you have such
+	  a board.
+
+config MACH_OMAP_H3
+	bool "TI H3 Support"
+	depends on ARCH_OMAP1 && ARCH_OMAP16XX
+    	help
+	  TI OMAP 1710 H3 board support. Say Y here if you have such
+	  a board.
+
+config MACH_OMAP_OSK
+	bool "TI OSK Support"
+	depends on ARCH_OMAP1 && ARCH_OMAP16XX
+    	help
+	  TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
+          if you have such a board.
+
+config MACH_OMAP_PERSEUS2
+	bool "TI Perseus2"
+	depends on ARCH_OMAP1 && ARCH_OMAP730
+    	help
+	  Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
+	  a board.
+
+config MACH_VOICEBLUE
+	bool "Voiceblue"
+	depends on ARCH_OMAP1 && ARCH_OMAP1510
+	help
+	  Support for Voiceblue GSM/VoIP gateway. Say Y here if you have
+	  such a board.
+
+config MACH_NETSTAR
+	bool "NetStar"
+	depends on ARCH_OMAP1 && ARCH_OMAP1510
+	help
+	  Support for NetStar PBX. Say Y here if you have such a board.
+
+config MACH_OMAP_GENERIC
+	bool "Generic OMAP board"
+	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX)
+	help
+          Support for generic OMAP-1510, 1610 or 1710 board with
+          no FPGA. Can be used as template for porting Linux to
+          custom OMAP boards. Say Y here if you have a custom
+          board.
+
+comment "OMAP CPU Speed"
+	depends on ARCH_OMAP1
+
+config OMAP_CLOCKS_SET_BY_BOOTLOADER
+	bool "OMAP clocks set by bootloader"
+	depends on ARCH_OMAP1
+	help
+	  Enable this option to prevent the kernel from overriding the clock
+	  frequencies programmed by bootloader for MPU, DSP, MMUs, TC,
+	  internal LCD controller and MPU peripherals.
+
+config OMAP_ARM_216MHZ
+	bool "OMAP ARM 216 MHz CPU (1710 only)"
+        depends on ARCH_OMAP1 && ARCH_OMAP16XX
+        help
+          Enable 216 MHz clock for OMAP1710 CPU. If unsure, say N.
+
+config OMAP_ARM_195MHZ
+	bool "OMAP ARM 195 MHz CPU"
+	depends on ARCH_OMAP1 && ARCH_OMAP730
+	help
+          Enable 195MHz clock for OMAP CPU. If unsure, say N.
+
+config OMAP_ARM_192MHZ
+	bool "OMAP ARM 192 MHz CPU"
+	depends on ARCH_OMAP1 && ARCH_OMAP16XX
+	help
+          Enable 192MHz clock for OMAP CPU. If unsure, say N.
+
+config OMAP_ARM_182MHZ
+	bool "OMAP ARM 182 MHz CPU"
+	depends on ARCH_OMAP1 && ARCH_OMAP730
+	help
+          Enable 182MHz clock for OMAP CPU. If unsure, say N.
+
+config OMAP_ARM_168MHZ
+	bool "OMAP ARM 168 MHz CPU"
+	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+	help
+          Enable 168MHz clock for OMAP CPU. If unsure, say N.
+
+config OMAP_ARM_150MHZ
+	bool "OMAP ARM 150 MHz CPU"
+	depends on ARCH_OMAP1 && ARCH_OMAP1510
+	help
+	  Enable 150MHz clock for OMAP CPU. If unsure, say N.
+
+config OMAP_ARM_120MHZ
+	bool "OMAP ARM 120 MHz CPU"
+	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+	help
+          Enable 120MHz clock for OMAP CPU. If unsure, say N.
+
+config OMAP_ARM_60MHZ
+	bool "OMAP ARM 60 MHz CPU"
+	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+        default y
+	help
+          Enable 60MHz clock for OMAP CPU. If unsure, say Y.
+
+config OMAP_ARM_30MHZ
+	bool "OMAP ARM 30 MHz CPU"
+	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+	help
+          Enable 30MHz clock for OMAP CPU. If unsure, say N.
+
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
new file mode 100644
index 000000000000..d386fd913f0c
--- /dev/null
+++ b/arch/arm/mach-omap1/Makefile
@@ -0,0 +1,30 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Common support
+obj-y := io.o id.o irq.o time.o serial.o
+led-y := leds.o
+
+# Specific board support
+obj-$(CONFIG_MACH_OMAP_H2)		+= board-h2.o
+obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= board-innovator.o
+obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
+obj-$(CONFIG_MACH_OMAP_PERSEUS2)	+= board-perseus2.o
+obj-$(CONFIG_MACH_OMAP_OSK)		+= board-osk.o
+obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o
+obj-$(CONFIG_MACH_VOICEBLUE)		+= board-voiceblue.o
+obj-$(CONFIG_MACH_NETSTAR)		+= board-netstar.o
+
+ifeq ($(CONFIG_ARCH_OMAP1510),y)
+# Innovator-1510 FPGA
+obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= fpga.o
+endif
+
+# LEDs support
+led-$(CONFIG_MACH_OMAP_H2)		+= leds-h2p2-debug.o
+led-$(CONFIG_MACH_OMAP_INNOVATOR)	+= leds-innovator.o
+led-$(CONFIG_MACH_OMAP_PERSEUS2)	+= leds-h2p2-debug.o
+led-$(CONFIG_MACH_OMAP_OSK)		+= leds-osk.o
+obj-$(CONFIG_LEDS)			+= $(led-y)
+
diff --git a/arch/arm/mach-omap/Makefile.boot b/arch/arm/mach-omap1/Makefile.boot
index fee1a6a15b54..292d56c5a888 100644
--- a/arch/arm/mach-omap/Makefile.boot
+++ b/arch/arm/mach-omap1/Makefile.boot
@@ -1,4 +1,3 @@
    zreladdr-y		:= 0x10008000
 params_phys-y		:= 0x10000100
 initrd_phys-y		:= 0x10800000
-
diff --git a/arch/arm/mach-omap/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 384bc7cec1db..122796ebe8f5 100644
--- a/arch/arm/mach-omap/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/board-generic.c
+ * linux/arch/arm/mach-omap1/board-generic.c
  *
  * Modified from board-innovator1510.c
  *
@@ -26,8 +26,7 @@
 #include <asm/arch/mux.h>
 #include <asm/arch/usb.h>
 #include <asm/arch/board.h>
-
-#include "common.h"
+#include <asm/arch/common.h>
 
 static int __initdata generic_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
 
@@ -84,7 +83,7 @@ static void __init omap_generic_init(void)
 
 static void __init omap_generic_map_io(void)
 {
-	omap_map_io();
+	omap_map_common_io()
 }
 
 MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
diff --git a/arch/arm/mach-omap/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index f37c76a9b163..f4983ee95ab4 100644
--- a/arch/arm/mach-omap/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/board-h2.c
+ * linux/arch/arm/mach-omap1/board-h2.c
  *
  * Board specific inits for OMAP-1610 H2
  *
@@ -35,8 +35,7 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/tc.h>
 #include <asm/arch/usb.h>
-
-#include "common.h"
+#include <asm/arch/common.h>
 
 extern int omap_gpio_init(void);
 
@@ -172,7 +171,7 @@ static void __init h2_init(void)
 
 static void __init h2_map_io(void)
 {
-	omap_map_io();
+	omap_map_common_io();
 	omap_serial_init(h2_serial_ports);
 }
 
diff --git a/arch/arm/mach-omap/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 705e48594e9a..7cd419d61b40 100644
--- a/arch/arm/mach-omap/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/board-h3.c
+ * linux/arch/arm/mach-omap1/board-h3.c
  *
  * This file contains OMAP1710 H3 specific code.
  *
@@ -37,8 +37,7 @@
 #include <asm/arch/mux.h>
 #include <asm/arch/tc.h>
 #include <asm/arch/usb.h>
-
-#include "common.h"
+#include <asm/arch/common.h>
 
 extern int omap_gpio_init(void);
 
@@ -190,7 +189,7 @@ void h3_init_irq(void)
 
 static void __init h3_map_io(void)
 {
-	omap_map_io();
+	omap_map_common_io();
 	omap_serial_init(h3_serial_ports);
 }
 
diff --git a/arch/arm/mach-omap/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 523363f18cc0..91de60a91ef8 100644
--- a/arch/arm/mach-omap/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/board-innovator.c
+ * linux/arch/arm/mach-omap1/board-innovator.c
  *
  * Board specific inits for OMAP-1510 and OMAP-1610 Innovator
  *
@@ -33,8 +33,7 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/tc.h>
 #include <asm/arch/usb.h>
-
-#include "common.h"
+#include <asm/arch/common.h>
 
 static int __initdata innovator_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
 
@@ -252,7 +251,7 @@ static void __init innovator_init(void)
 
 static void __init innovator_map_io(void)
 {
-	omap_map_io();
+	omap_map_common_io();
 
 #ifdef CONFIG_ARCH_OMAP1510
 	if (cpu_is_omap1510()) {
diff --git a/arch/arm/mach-omap/board-netstar.c b/arch/arm/mach-omap1/board-netstar.c
index 8c653734d5a3..6750b2014092 100644
--- a/arch/arm/mach-omap/board-netstar.c
+++ b/arch/arm/mach-omap1/board-netstar.c
@@ -26,8 +26,7 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/usb.h>
-
-#include "common.h"
+#include <asm/arch/common.h>
 
 extern void __init omap_init_time(void);
 extern int omap_gpio_init(void);
@@ -100,7 +99,7 @@ static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
 
 static void __init netstar_map_io(void)
 {
-	omap_map_io();
+	omap_map_common_io();
 	omap_serial_init(omap_serial_ports);
 }
 
diff --git a/arch/arm/mach-omap/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index cb433436aa08..6844e536c698 100644
--- a/arch/arm/mach-omap/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/board-osk.c
+ * linux/arch/arm/mach-omap1/board-osk.c
  *
  * Board specific init for OMAP5912 OSK
  *
@@ -39,8 +39,7 @@
 #include <asm/arch/usb.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/tc.h>
-
-#include "common.h"
+#include <asm/arch/common.h>
 
 static struct map_desc osk5912_io_desc[] __initdata = {
 { OMAP_OSK_NOR_FLASH_BASE, OMAP_OSK_NOR_FLASH_START, OMAP_OSK_NOR_FLASH_SIZE,
@@ -153,7 +152,7 @@ static void __init osk_init(void)
 
 static void __init osk_map_io(void)
 {
-	omap_map_io();
+	omap_map_common_io();
 	iotable_init(osk5912_io_desc, ARRAY_SIZE(osk5912_io_desc));
 	omap_serial_init(osk_serial_ports);
 }
diff --git a/arch/arm/mach-omap/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index d5342043d48f..213317392d9b 100644
--- a/arch/arm/mach-omap/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/board-perseus2.c
+ * linux/arch/arm/mach-omap1/board-perseus2.c
  *
  * Modified from board-generic.c
  *
@@ -27,8 +27,7 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/fpga.h>
-
-#include "common.h"
+#include <asm/arch/common.h>
 
 static struct resource smc91x_resources[] = {
 	[0] = {
@@ -140,7 +139,7 @@ static struct map_desc omap_perseus2_io_desc[] __initdata = {
 
 static void __init omap_perseus2_map_io(void)
 {
-	omap_map_io();
+	omap_map_common_io();
 	iotable_init(omap_perseus2_io_desc,
 		     ARRAY_SIZE(omap_perseus2_io_desc));
 
diff --git a/arch/arm/mach-omap/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 6b0c5003d719..e42281988990 100644
--- a/arch/arm/mach-omap/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/board-voiceblue.c
+ * linux/arch/arm/mach-omap1/board-voiceblue.c
  *
  * Modified from board-generic.c
  *
@@ -31,8 +31,7 @@
 #include <asm/arch/tc.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/usb.h>
-
-#include "common.h"
+#include <asm/arch/common.h>
 
 extern void omap_init_time(void);
 extern int omap_gpio_init(void);
@@ -170,7 +169,7 @@ static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
 
 static void __init voiceblue_map_io(void)
 {
-	omap_map_io();
+	omap_map_common_io();
 	omap_serial_init(omap_serial_ports);
 }
 
diff --git a/arch/arm/mach-omap/fpga.c b/arch/arm/mach-omap1/fpga.c
index 7c08f6c2e1d0..7c08f6c2e1d0 100644
--- a/arch/arm/mach-omap/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
new file mode 100644
index 000000000000..986c3b7e09bb
--- /dev/null
+++ b/arch/arm/mach-omap1/id.c
@@ -0,0 +1,188 @@
+/*
+ * linux/arch/arm/mach-omap1/id.c
+ *
+ * OMAP1 CPU identification code
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+
+struct omap_id {
+	u16	jtag_id;	/* Used to determine OMAP type */
+	u8	die_rev;	/* Processor revision */
+	u32	omap_id;	/* OMAP revision */
+	u32	type;		/* Cpu id bits [31:08], cpu class bits [07:00] */
+};
+
+/* Register values to detect the OMAP version */
+static struct omap_id omap_ids[] __initdata = {
+	{ .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
+	{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
+	{ .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
+	{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000},
+	{ .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000},
+	{ .jtag_id = 0xb576, .die_rev = 0x3, .omap_id = 0x03320100, .type = 0x16100c00},
+	{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320200, .type = 0x16100d00},
+	{ .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00},
+	{ .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00},
+	{ .jtag_id = 0xb576, .die_rev = 0x1, .omap_id = 0x03320100, .type = 0x16110000},
+	{ .jtag_id = 0xb58c, .die_rev = 0x2, .omap_id = 0x03320200, .type = 0x16110b00},
+	{ .jtag_id = 0xb58c, .die_rev = 0x3, .omap_id = 0x03320200, .type = 0x16110c00},
+	{ .jtag_id = 0xb65f, .die_rev = 0x0, .omap_id = 0x03320400, .type = 0x16212300},
+	{ .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320400, .type = 0x16212300},
+	{ .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x16212300},
+	{ .jtag_id = 0xb5f7, .die_rev = 0x0, .omap_id = 0x03330000, .type = 0x17100000},
+	{ .jtag_id = 0xb5f7, .die_rev = 0x1, .omap_id = 0x03330100, .type = 0x17100000},
+	{ .jtag_id = 0xb5f7, .die_rev = 0x2, .omap_id = 0x03330100, .type = 0x17100000},
+};
+
+/*
+ * Get OMAP type from PROD_ID.
+ * 1710 has the PROD_ID in bits 15:00, not in 16:01 as documented in TRM.
+ * 1510 PROD_ID is empty, and 1610 PROD_ID does not make sense.
+ * Undocumented register in TEST BLOCK is used as fallback; This seems to
+ * work on 1510, 1610 & 1710. The official way hopefully will work in future
+ * processors.
+ */
+static u16 __init omap_get_jtag_id(void)
+{
+	u32 prod_id, omap_id;
+
+	prod_id = omap_readl(OMAP_PRODUCTION_ID_1);
+	omap_id = omap_readl(OMAP32_ID_1);
+
+	/* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730 */
+	if (((prod_id >> 20) == 0) || (prod_id == omap_id))
+		prod_id = 0;
+	else
+		prod_id &= 0xffff;
+
+	if (prod_id)
+		return prod_id;
+
+	/* Use OMAP32_ID_1 as fallback */
+	prod_id = ((omap_id >> 12) & 0xffff);
+
+	return prod_id;
+}
+
+/*
+ * Get OMAP revision from DIE_REV.
+ * Early 1710 processors may have broken OMAP_DIE_ID, it contains PROD_ID.
+ * Undocumented register in the TEST BLOCK is used as fallback.
+ * REVISIT: This does not seem to work on 1510
+ */
+static u8 __init omap_get_die_rev(void)
+{
+	u32 die_rev;
+
+	die_rev = omap_readl(OMAP_DIE_ID_1);
+
+	/* Check for broken OMAP_DIE_ID on early 1710 */
+	if (((die_rev >> 12) & 0xffff) == omap_get_jtag_id())
+		die_rev = 0;
+
+	die_rev = (die_rev >> 17) & 0xf;
+	if (die_rev)
+		return die_rev;
+
+	die_rev = (omap_readl(OMAP32_ID_1) >> 28) & 0xf;
+
+	return die_rev;
+}
+
+void __init omap_check_revision(void)
+{
+	int i;
+	u16 jtag_id;
+	u8 die_rev;
+	u32 omap_id;
+	u8 cpu_type;
+
+	jtag_id = omap_get_jtag_id();
+	die_rev = omap_get_die_rev();
+	omap_id = omap_readl(OMAP32_ID_0);
+
+#ifdef DEBUG
+	printk("OMAP_DIE_ID_0: 0x%08x\n", omap_readl(OMAP_DIE_ID_0));
+	printk("OMAP_DIE_ID_1: 0x%08x DIE_REV: %i\n",
+		omap_readl(OMAP_DIE_ID_1),
+	       (omap_readl(OMAP_DIE_ID_1) >> 17) & 0xf);
+	printk("OMAP_PRODUCTION_ID_0: 0x%08x\n", omap_readl(OMAP_PRODUCTION_ID_0));
+	printk("OMAP_PRODUCTION_ID_1: 0x%08x JTAG_ID: 0x%04x\n",
+		omap_readl(OMAP_PRODUCTION_ID_1),
+		omap_readl(OMAP_PRODUCTION_ID_1) & 0xffff);
+	printk("OMAP32_ID_0: 0x%08x\n", omap_readl(OMAP32_ID_0));
+	printk("OMAP32_ID_1: 0x%08x\n", omap_readl(OMAP32_ID_1));
+	printk("JTAG_ID: 0x%04x DIE_REV: %i\n", jtag_id, die_rev);
+#endif
+
+	system_serial_high = omap_readl(OMAP_DIE_ID_0);
+	system_serial_low = omap_readl(OMAP_DIE_ID_1);
+
+	/* First check only the major version in a safe way */
+	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
+		if (jtag_id == (omap_ids[i].jtag_id)) {
+			system_rev = omap_ids[i].type;
+			break;
+		}
+	}
+
+	/* Check if we can find the die revision */
+	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
+		if (jtag_id == omap_ids[i].jtag_id && die_rev == omap_ids[i].die_rev) {
+			system_rev = omap_ids[i].type;
+			break;
+		}
+	}
+
+	/* Finally check also the omap_id */
+	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
+		if (jtag_id == omap_ids[i].jtag_id
+		    && die_rev == omap_ids[i].die_rev
+		    && omap_id == omap_ids[i].omap_id) {
+			system_rev = omap_ids[i].type;
+			break;
+		}
+	}
+
+	/* Add the cpu class info (7xx, 15xx, 16xx, 24xx) */
+	cpu_type = system_rev >> 24;
+
+	switch (cpu_type) {
+	case 0x07:
+		system_rev |= 0x07;
+		break;
+	case 0x15:
+		system_rev |= 0x15;
+		break;
+	case 0x16:
+	case 0x17:
+		system_rev |= 0x16;
+		break;
+	case 0x24:
+		system_rev |= 0x24;
+		break;
+	default:
+		printk("Unknown OMAP cpu type: 0x%02x\n", cpu_type);
+	}
+
+	printk("OMAP%04x", system_rev >> 16);
+	if ((system_rev >> 8) & 0xff)
+		printk("%x", (system_rev >> 8) & 0xff);
+	printk(" revision %i handled as %02xxx id: %08x%08x\n",
+	       die_rev, system_rev & 0xff, system_serial_low,
+	       system_serial_high);
+}
+
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
new file mode 100644
index 000000000000..207df0fe934d
--- /dev/null
+++ b/arch/arm/mach-omap1/io.c
@@ -0,0 +1,115 @@
+/*
+ * linux/arch/arm/mach-omap1/io.c
+ *
+ * OMAP1 I/O mapping code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mach/map.h>
+#include <asm/io.h>
+#include <asm/arch/tc.h>
+
+extern int clk_init(void);
+extern void omap_check_revision(void);
+
+/*
+ * The machine specific code may provide the extra mapping besides the
+ * default mapping provided here.
+ */
+static struct map_desc omap_io_desc[] __initdata = {
+ { IO_VIRT,      	IO_PHYS,             IO_SIZE,        	   MT_DEVICE },
+};
+
+#ifdef CONFIG_ARCH_OMAP730
+static struct map_desc omap730_io_desc[] __initdata = {
+ { OMAP730_DSP_BASE,    OMAP730_DSP_START,    OMAP730_DSP_SIZE,    MT_DEVICE },
+ { OMAP730_DSPREG_BASE, OMAP730_DSPREG_START, OMAP730_DSPREG_SIZE, MT_DEVICE },
+ { OMAP730_SRAM_BASE,   OMAP730_SRAM_START,   OMAP730_SRAM_SIZE,   MT_DEVICE }
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1510
+static struct map_desc omap1510_io_desc[] __initdata = {
+ { OMAP1510_DSP_BASE,    OMAP1510_DSP_START,    OMAP1510_DSP_SIZE,    MT_DEVICE },
+ { OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_START, OMAP1510_DSPREG_SIZE, MT_DEVICE },
+ { OMAP1510_SRAM_BASE,   OMAP1510_SRAM_START,   OMAP1510_SRAM_SIZE,   MT_DEVICE }
+};
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+static struct map_desc omap1610_io_desc[] __initdata = {
+ { OMAP16XX_DSP_BASE,    OMAP16XX_DSP_START,    OMAP16XX_DSP_SIZE,    MT_DEVICE },
+ { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE },
+ { OMAP16XX_SRAM_BASE,   OMAP16XX_SRAM_START,   OMAP1610_SRAM_SIZE,   MT_DEVICE }
+};
+
+static struct map_desc omap5912_io_desc[] __initdata = {
+ { OMAP16XX_DSP_BASE,    OMAP16XX_DSP_START,    OMAP16XX_DSP_SIZE,    MT_DEVICE },
+ { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE },
+/*
+ * The OMAP5912 has 250kByte internal SRAM. Because the mapping is baseed on page
+ * size (4kByte), it seems that the last 2kByte (=0x800) of the 250kByte are not mapped.
+ * Add additional 2kByte (0x800) so that the last page is mapped and the last 2kByte
+ * can be used.
+ */
+ { OMAP16XX_SRAM_BASE,   OMAP16XX_SRAM_START,   OMAP5912_SRAM_SIZE + 0x800,   MT_DEVICE }
+};
+#endif
+
+static int initialized = 0;
+
+static void __init _omap_map_io(void)
+{
+	initialized = 1;
+
+	/* We have to initialize the IO space mapping before we can run
+	 * cpu_is_omapxxx() macros. */
+	iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
+	omap_check_revision();
+
+#ifdef CONFIG_ARCH_OMAP730
+	if (cpu_is_omap730()) {
+		iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc));
+	}
+#endif
+#ifdef CONFIG_ARCH_OMAP1510
+	if (cpu_is_omap1510()) {
+		iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
+	}
+#endif
+#if defined(CONFIG_ARCH_OMAP16XX)
+	if (cpu_is_omap1610() || cpu_is_omap1710()) {
+		iotable_init(omap1610_io_desc, ARRAY_SIZE(omap1610_io_desc));
+	}
+	if (cpu_is_omap5912()) {
+		iotable_init(omap5912_io_desc, ARRAY_SIZE(omap5912_io_desc));
+	}
+#endif
+
+	/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
+	 * on a Posted Write in the TIPB Bridge".
+	 */
+	omap_writew(0x0, MPU_PUBLIC_TIPB_CNTL);
+	omap_writew(0x0, MPU_PRIVATE_TIPB_CNTL);
+
+	/* Must init clocks early to assure that timer interrupt works
+	 */
+	clk_init();
+}
+
+/*
+ * This should only get called from board specific init
+ */
+void omap_map_common_io(void)
+{
+	if (!initialized)
+		_omap_map_io();
+}
diff --git a/arch/arm/mach-omap/irq.c b/arch/arm/mach-omap1/irq.c
index f01c99266a86..a11b6d807352 100644
--- a/arch/arm/mach-omap/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -56,6 +56,7 @@
 struct omap_irq_bank {
 	unsigned long base_reg;
 	unsigned long trigger_map;
+	unsigned long wake_enable;
 };
 
 static unsigned int irq_bank_count = 0;
@@ -105,6 +106,19 @@ static void omap_mask_ack_irq(unsigned int irq)
 	omap_ack_irq(irq);
 }
 
+static int omap_wake_irq(unsigned int irq, unsigned int enable)
+{
+	int bank = IRQ_BANK(irq);
+
+	if (enable)
+		irq_banks[bank].wake_enable |= IRQ_BIT(irq);
+	else
+		irq_banks[bank].wake_enable &= ~IRQ_BIT(irq);
+
+	return 0;
+}
+
+
 /*
  * Allows tuning the IRQ type and priority
  *
@@ -145,7 +159,7 @@ static struct omap_irq_bank omap1510_irq_banks[] = {
 static struct omap_irq_bank omap1610_irq_banks[] = {
 	{ .base_reg = OMAP_IH1_BASE, 		.trigger_map = 0xb3fefe8f },
 	{ .base_reg = OMAP_IH2_BASE, 		.trigger_map = 0xfdb7c1fd },
-	{ .base_reg = OMAP_IH2_BASE + 0x100,	.trigger_map = 0xfffff7ff },
+	{ .base_reg = OMAP_IH2_BASE + 0x100,	.trigger_map = 0xffffb7ff },
 	{ .base_reg = OMAP_IH2_BASE + 0x200,	.trigger_map = 0xffffffff },
 };
 #endif
@@ -154,6 +168,7 @@ static struct irqchip omap_irq_chip = {
 	.ack    = omap_mask_ack_irq,
 	.mask   = omap_mask_irq,
 	.unmask = omap_unmask_irq,
+	.wake	= omap_wake_irq,
 };
 
 void __init omap_init_irq(void)
diff --git a/arch/arm/mach-omap/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index 6e98290cca5c..6e98290cca5c 100644
--- a/arch/arm/mach-omap/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
diff --git a/arch/arm/mach-omap/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c
index 8043b7d0f66e..8043b7d0f66e 100644
--- a/arch/arm/mach-omap/leds-innovator.c
+++ b/arch/arm/mach-omap1/leds-innovator.c
diff --git a/arch/arm/mach-omap/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
index f5177f430793..4a0e8b9d4fc3 100644
--- a/arch/arm/mach-omap/leds-osk.c
+++ b/arch/arm/mach-omap1/leds-osk.c
@@ -129,14 +129,11 @@ void osk_leds_event(led_event_t evt)
 
 #ifdef	CONFIG_FB_OMAP
 
-#ifdef CONFIG_LEDS_TIMER
 	case led_timer:
 		hw_led_state ^= TIMER_LED;
 		mistral_setled();
 		break;
-#endif
 
-#ifdef CONFIG_LEDS_CPU
 	case led_idle_start:
 		hw_led_state |= IDLE_LED;
 		mistral_setled();
@@ -146,7 +143,6 @@ void osk_leds_event(led_event_t evt)
 		hw_led_state &= ~IDLE_LED;
 		mistral_setled();
 		break;
-#endif
 
 #endif	/* CONFIG_FB_OMAP */
 
diff --git a/arch/arm/mach-omap/leds.c b/arch/arm/mach-omap1/leds.c
index 8ab21fe98e1b..8ab21fe98e1b 100644
--- a/arch/arm/mach-omap/leds.c
+++ b/arch/arm/mach-omap1/leds.c
diff --git a/arch/arm/mach-omap/leds.h b/arch/arm/mach-omap1/leds.h
index a1e9fedc376c..a1e9fedc376c 100644
--- a/arch/arm/mach-omap/leds.h
+++ b/arch/arm/mach-omap1/leds.h
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
new file mode 100644
index 000000000000..214e5d17c8b5
--- /dev/null
+++ b/arch/arm/mach-omap1/serial.c
@@ -0,0 +1,200 @@
+/*
+ * linux/arch/arm/mach-omap1/id.c
+ *
+ * OMAP1 CPU identification code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/clock.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/fpga.h>
+
+static struct clk * uart1_ck = NULL;
+static struct clk * uart2_ck = NULL;
+static struct clk * uart3_ck = NULL;
+
+static inline unsigned int omap_serial_in(struct plat_serial8250_port *up,
+					  int offset)
+{
+	offset <<= up->regshift;
+	return (unsigned int)__raw_readb(up->membase + offset);
+}
+
+static inline void omap_serial_outp(struct plat_serial8250_port *p, int offset,
+				    int value)
+{
+	offset <<= p->regshift;
+	__raw_writeb(value, p->membase + offset);
+}
+
+/*
+ * Internal UARTs need to be initialized for the 8250 autoconfig to work
+ * properly. Note that the TX watermark initialization may not be needed
+ * once the 8250.c watermark handling code is merged.
+ */
+static void __init omap_serial_reset(struct plat_serial8250_port *p)
+{
+	omap_serial_outp(p, UART_OMAP_MDR1, 0x07);	/* disable UART */
+	omap_serial_outp(p, UART_OMAP_SCR, 0x08);	/* TX watermark */
+	omap_serial_outp(p, UART_OMAP_MDR1, 0x00);	/* enable UART */
+
+	if (!cpu_is_omap1510()) {
+		omap_serial_outp(p, UART_OMAP_SYSC, 0x01);
+		while (!(omap_serial_in(p, UART_OMAP_SYSC) & 0x01));
+	}
+}
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.membase	= (char*)IO_ADDRESS(OMAP_UART1_BASE),
+		.mapbase	= (unsigned long)OMAP_UART1_BASE,
+		.irq		= INT_UART1,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= OMAP16XX_BASE_BAUD * 16,
+	},
+	{
+		.membase	= (char*)IO_ADDRESS(OMAP_UART2_BASE),
+		.mapbase	= (unsigned long)OMAP_UART2_BASE,
+		.irq		= INT_UART2,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= OMAP16XX_BASE_BAUD * 16,
+	},
+	{
+		.membase	= (char*)IO_ADDRESS(OMAP_UART3_BASE),
+		.mapbase	= (unsigned long)OMAP_UART3_BASE,
+		.irq		= INT_UART3,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= OMAP16XX_BASE_BAUD * 16,
+	},
+	{ },
+};
+
+static struct platform_device serial_device = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
+/*
+ * Note that on Innovator-1510 UART2 pins conflict with USB2.
+ * By default UART2 does not work on Innovator-1510 if you have
+ * USB OHCI enabled. To use UART2, you must disable USB2 first.
+ */
+void __init omap_serial_init(int ports[OMAP_MAX_NR_PORTS])
+{
+	int i;
+
+	if (cpu_is_omap730()) {
+		serial_platform_data[0].regshift = 0;
+		serial_platform_data[1].regshift = 0;
+		serial_platform_data[0].irq = INT_730_UART_MODEM_1;
+		serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2;
+	}
+
+	if (cpu_is_omap1510()) {
+		serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16;
+		serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16;
+		serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
+	}
+
+	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
+		unsigned char reg;
+
+		if (ports[i] == 0) {
+			serial_platform_data[i].membase = NULL;
+			serial_platform_data[i].mapbase = 0;
+			continue;
+		}
+
+		switch (i) {
+		case 0:
+			uart1_ck = clk_get(NULL, "uart1_ck");
+			if (IS_ERR(uart1_ck))
+				printk("Could not get uart1_ck\n");
+			else {
+				clk_use(uart1_ck);
+				if (cpu_is_omap1510())
+					clk_set_rate(uart1_ck, 12000000);
+			}
+			if (cpu_is_omap1510()) {
+				omap_cfg_reg(UART1_TX);
+				omap_cfg_reg(UART1_RTS);
+				if (machine_is_omap_innovator()) {
+					reg = fpga_read(OMAP1510_FPGA_POWER);
+					reg |= OMAP1510_FPGA_PCR_COM1_EN;
+					fpga_write(reg, OMAP1510_FPGA_POWER);
+					udelay(10);
+				}
+			}
+			break;
+		case 1:
+			uart2_ck = clk_get(NULL, "uart2_ck");
+			if (IS_ERR(uart2_ck))
+				printk("Could not get uart2_ck\n");
+			else {
+				clk_use(uart2_ck);
+				if (cpu_is_omap1510())
+					clk_set_rate(uart2_ck, 12000000);
+				else
+					clk_set_rate(uart2_ck, 48000000);
+			}
+			if (cpu_is_omap1510()) {
+				omap_cfg_reg(UART2_TX);
+				omap_cfg_reg(UART2_RTS);
+				if (machine_is_omap_innovator()) {
+					reg = fpga_read(OMAP1510_FPGA_POWER);
+					reg |= OMAP1510_FPGA_PCR_COM2_EN;
+					fpga_write(reg, OMAP1510_FPGA_POWER);
+					udelay(10);
+				}
+			}
+			break;
+		case 2:
+			uart3_ck = clk_get(NULL, "uart3_ck");
+			if (IS_ERR(uart3_ck))
+				printk("Could not get uart3_ck\n");
+			else {
+				clk_use(uart3_ck);
+				if (cpu_is_omap1510())
+					clk_set_rate(uart3_ck, 12000000);
+			}
+			if (cpu_is_omap1510()) {
+				omap_cfg_reg(UART3_TX);
+				omap_cfg_reg(UART3_RX);
+			}
+			break;
+		}
+		omap_serial_reset(&serial_platform_data[i]);
+	}
+}
+
+static int __init omap_init(void)
+{
+	return platform_device_register(&serial_device);
+}
+arch_initcall(omap_init);
diff --git a/arch/arm/mach-omap/time.c b/arch/arm/mach-omap1/time.c
index dd34e9f4c413..d540539c9bbb 100644
--- a/arch/arm/mach-omap/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/time.c
+ * linux/arch/arm/mach-omap1/time.c
  *
  * OMAP Timers
  *
@@ -58,17 +58,9 @@ struct sys_timer omap_timer;
  * MPU timer
  * ---------------------------------------------------------------------------
  */
-#define OMAP_MPU_TIMER1_BASE		(0xfffec500)
-#define OMAP_MPU_TIMER2_BASE		(0xfffec600)
-#define OMAP_MPU_TIMER3_BASE		(0xfffec700)
 #define OMAP_MPU_TIMER_BASE		OMAP_MPU_TIMER1_BASE
 #define OMAP_MPU_TIMER_OFFSET		0x100
 
-#define MPU_TIMER_FREE			(1 << 6)
-#define MPU_TIMER_CLOCK_ENABLE		(1 << 5)
-#define MPU_TIMER_AR			(1 << 1)
-#define MPU_TIMER_ST			(1 << 0)
-
 /* cycles to nsec conversions taken from arch/i386/kernel/timers/timer_tsc.c,
  * converted to use kHz by Kevin Hilman */
 /* convert from cycles(64bits) => nanoseconds (64bits)
@@ -255,6 +247,13 @@ unsigned long long sched_clock(void)
 #define OMAP_32K_TIMER_TCR		0x04
 
 #define OMAP_32K_TICKS_PER_HZ		(32768 / HZ)
+#if (32768 % HZ) != 0
+/* We cannot ignore modulo.
+ * Potential error can be as high as several percent.
+ */
+#define OMAP_32K_TICK_MODULO		(32768 % HZ)
+static unsigned modulo_count = 0; /* Counts 1/HZ units */
+#endif
 
 /*
  * TRM says 1 / HZ = ( TVR + 1) / 32768, so TRV = (32768 / HZ) - 1
@@ -331,6 +330,19 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id,
 	now = omap_32k_sync_timer_read();
 
 	while (now - omap_32k_last_tick >= OMAP_32K_TICKS_PER_HZ) {
+#ifdef OMAP_32K_TICK_MODULO
+		/* Modulo addition may put omap_32k_last_tick ahead of now
+		 * and cause unwanted repetition of the while loop.
+		 */
+		if (unlikely(now - omap_32k_last_tick == ~0))
+			break;
+
+		modulo_count += OMAP_32K_TICK_MODULO;
+		if (modulo_count > HZ) {
+			++omap_32k_last_tick;
+			modulo_count -= HZ;
+		}
+#endif
 		omap_32k_last_tick += OMAP_32K_TICKS_PER_HZ;
 		timer_tick(regs);
 	}
@@ -407,7 +419,7 @@ static __init void omap_init_32k_timer(void)
  * Timer initialization
  * ---------------------------------------------------------------------------
  */
-void __init omap_timer_init(void)
+static void __init omap_timer_init(void)
 {
 #if defined(CONFIG_OMAP_MPU_TIMER)
 	omap_init_mpu_timer();
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 95606b4a3ba6..afbbeb6f4658 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -101,7 +101,7 @@ config CPU_ARM922T
 
 # ARM925T
 config CPU_ARM925T
- 	bool "Support ARM925T processor" if ARCH_OMAP
+ 	bool "Support ARM925T processor" if ARCH_OMAP1
  	depends on ARCH_OMAP1510
  	default y if ARCH_OMAP1510
 	select CPU_32v4
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index c3bd503b43a2..b19f00e99a21 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -399,7 +399,7 @@ static void __init build_mem_type_table(void)
 		ecc_mask = 0;
 	}
 
-	if (cpu_arch <= CPU_ARCH_ARMv5) {
+	if (cpu_arch <= CPU_ARCH_ARMv5TEJ) {
 		for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 			if (mem_types[i].prot_l1)
 				mem_types[i].prot_l1 |= PMD_BIT4;
@@ -584,7 +584,7 @@ void setup_mm_for_reboot(char mode)
 		pmdval = (i << PGDIR_SHIFT) |
 			 PMD_SECT_AP_WRITE | PMD_SECT_AP_READ |
 			 PMD_TYPE_SECT;
-		if (cpu_arch <= CPU_ARCH_ARMv5)
+		if (cpu_arch <= CPU_ARCH_ARMv5TEJ)
 			pmdval |= PMD_BIT4;
 		pmd = pmd_off(pgd, i << PGDIR_SHIFT);
 		pmd[0] = __pmd(pmdval);
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
new file mode 100644
index 000000000000..345365852f8c
--- /dev/null
+++ b/arch/arm/plat-omap/Kconfig
@@ -0,0 +1,112 @@
+if ARCH_OMAP
+
+menu "TI OMAP Implementations"
+
+config ARCH_OMAP_OTG
+	bool
+
+choice
+	prompt "OMAP System Type"
+	default ARCH_OMAP1
+
+config ARCH_OMAP1
+	bool "TI OMAP1"
+
+config ARCH_OMAP2
+	bool "TI OMAP2"
+
+endchoice
+
+comment "OMAP Feature Selections"
+
+config OMAP_RESET_CLOCKS
+	bool "Reset unused clocks during boot"
+	depends on ARCH_OMAP
+	default n
+	help
+	  Say Y if you want to reset unused clocks during boot.
+	  This option saves power, but assumes all drivers are
+	  using the clock framework. Broken drivers that do not
+	  yet use clock framework may not work with this option.
+	  If you are booting from another operating system, you
+	  probably do not want this option enabled until your
+	  device drivers work properly.
+
+config OMAP_MUX
+	bool "OMAP multiplexing support"
+        depends on ARCH_OMAP
+	default y
+        help
+          Pin multiplexing support for OMAP boards. If your bootloader
+          sets the multiplexing correctly, say N. Otherwise, or if unsure,
+          say Y.
+
+config OMAP_MUX_DEBUG
+	bool "Multiplexing debug output"
+        depends on OMAP_MUX
+        default n
+        help
+          Makes the multiplexing functions print out a lot of debug info.
+          This is useful if you want to find out the correct values of the
+          multiplexing registers.
+
+config OMAP_MUX_WARNINGS
+	bool "Warn about pins the bootloader didn't set up"
+        depends on OMAP_MUX
+        default y
+        help
+	  Choose Y here to warn whenever driver initialization logic needs
+	  to change the pin multiplexing setup.  When there are no warnings
+	  printed, it's safe to deselect OMAP_MUX for your product.
+
+choice
+        prompt "System timer"
+	default OMAP_MPU_TIMER
+
+config OMAP_MPU_TIMER
+	bool "Use mpu timer"
+	help
+	  Select this option if you want to use the OMAP mpu timer. This
+	  timer provides more intra-tick resolution than the 32KHz timer,
+	  but consumes more power.
+
+config OMAP_32K_TIMER
+	bool "Use 32KHz timer"
+	depends on ARCH_OMAP16XX
+	help
+	  Select this option if you want to enable the OMAP 32KHz timer.
+	  This timer saves power compared to the OMAP_MPU_TIMER, and has
+	  support for no tick during idle. The 32KHz timer provides less
+	  intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
+	  currently only available for OMAP-16xx.
+
+endchoice
+
+config OMAP_32K_TIMER_HZ
+       int "Kernel internal timer frequency for 32KHz timer"
+       range 32 1024
+       depends on OMAP_32K_TIMER
+       default "128"
+       help
+	  Kernel internal timer frequency should be a divisor of 32768,
+	  such as 64 or 128.
+
+choice
+	prompt "Low-level debug console UART"
+	depends on ARCH_OMAP
+	default OMAP_LL_DEBUG_UART1
+
+config OMAP_LL_DEBUG_UART1
+	bool "UART1"
+
+config OMAP_LL_DEBUG_UART2
+	bool "UART2"
+
+config OMAP_LL_DEBUG_UART3
+	bool "UART3"
+
+endchoice
+
+endmenu
+
+endif
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
new file mode 100644
index 000000000000..531e11af54d4
--- /dev/null
+++ b/arch/arm/plat-omap/Makefile
@@ -0,0 +1,17 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Common support
+obj-y := common.o dma.o clock.o mux.o gpio.o mcbsp.o usb.o
+obj-m :=
+obj-n :=
+obj-  :=
+
+# OCPI interconnect support for 1710, 1610 and 5912
+obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
+
+# Power Management
+obj-$(CONFIG_PM) += pm.o sleep.o
+
+obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
diff --git a/arch/arm/mach-omap/clock.c b/arch/arm/plat-omap/clock.c
index e91186b5341a..59d91b3262ba 100644
--- a/arch/arm/mach-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -1,5 +1,5 @@
 /*
- *  linux/arch/arm/mach-omap/clock.c
+ *  linux/arch/arm/plat-omap/clock.c
  *
  *  Copyright (C) 2004 Nokia corporation
  *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
@@ -14,6 +14,7 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 
+#include <asm/io.h>
 #include <asm/semaphore.h>
 #include <asm/hardware/clock.h>
 #include <asm/arch/board.h>
@@ -25,6 +26,8 @@ static LIST_HEAD(clocks);
 static DECLARE_MUTEX(clocks_sem);
 static DEFINE_SPINLOCK(clockfw_lock);
 static void propagate_rate(struct clk *  clk);
+/* UART clock function */
+static int set_uart_rate(struct clk * clk, unsigned long rate);
 /* External clock (MCLK & BCLK) functions */
 static int set_ext_clk_rate(struct clk *  clk, unsigned long rate);
 static long round_ext_clk_rate(struct clk *  clk, unsigned long rate);
@@ -34,7 +37,7 @@ static int select_table_rate(struct clk *  clk, unsigned long rate);
 static long round_to_table_rate(struct clk *  clk, unsigned long rate);
 void clk_setdpll(__u16, __u16);
 
-struct mpu_rate rate_table[] = {
+static struct mpu_rate rate_table[] = {
 	/* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL
 	 * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv
 	 */
@@ -48,7 +51,7 @@ struct mpu_rate rate_table[] = {
 	{ 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */
 	{ 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */
 	{  96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */
-	{  48000000, 12000000, 192000000, 0x0ccf, 0x2810 }, /* 4/4/4/4/8/8 */
+	{  48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/8/4/4/8/8 */
 	{  24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */
 #endif
 #if defined(CONFIG_OMAP_ARM_182MHZ)
@@ -58,7 +61,7 @@ struct mpu_rate rate_table[] = {
 	{ 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */
 #endif
 #if defined(CONFIG_OMAP_ARM_150MHZ)
-	{ 150000000, 12000000, 150000000, 0x150a, 0x2cb0 }, /* 0/0/1/1/2/2 */
+	{ 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */
 #endif
 #if defined(CONFIG_OMAP_ARM_120MHZ)
 	{ 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */
@@ -76,19 +79,11 @@ struct mpu_rate rate_table[] = {
 };
 
 
-static void ckctl_recalc(struct clk *  clk)
-{
-	int dsor;
-
-	/* Calculate divisor encoded as 2-bit exponent */
-	dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
-	if (unlikely(clk->rate == clk->parent->rate / dsor))
-		return; /* No change, quick exit */
-	clk->rate = clk->parent->rate / dsor;
-
-	if (unlikely(clk->flags & RATE_PROPAGATES))
-		propagate_rate(clk);
-}
+static void ckctl_recalc(struct clk *  clk);
+int __clk_enable(struct clk *clk);
+void __clk_disable(struct clk *clk);
+void __clk_unuse(struct clk *clk);
+int __clk_use(struct clk *clk);
 
 
 static void followparent_recalc(struct clk *  clk)
@@ -102,6 +97,14 @@ static void watchdog_recalc(struct clk *  clk)
 	clk->rate = clk->parent->rate / 14;
 }
 
+static void uart_recalc(struct clk * clk)
+{
+	unsigned int val = omap_readl(clk->enable_reg);
+	if (val & clk->enable_bit)
+		clk->rate = 48000000;
+	else
+		clk->rate = 12000000;
+}
 
 static struct clk ck_ref = {
 	.name		= "ck_ref",
@@ -138,7 +141,7 @@ static struct clk arm_ck = {
 static struct clk armper_ck = {
 	.name		= "armper_ck",
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+	.flags		= CLOCK_IN_OMAP730 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  RATE_CKCTL,
 	.enable_reg	= ARM_IDLECT2,
 	.enable_bit	= EN_PERCK,
@@ -185,7 +188,7 @@ static struct clk armwdt_ck = {
 static struct clk arminth_ck16xx = {
 	.name		= "arminth_ck",
 	.parent		= &arm_ck,
-	.flags		= CLOCK_IN_OMAP16XX,
+	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
 	/* Note: On 16xx the frequency can be divided by 2 by programming
 	 * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
@@ -214,6 +217,38 @@ static struct clk dspmmu_ck = {
 	.recalc		= &ckctl_recalc,
 };
 
+static struct clk dspper_ck = {
+	.name		= "dspper_ck",
+	.parent		= &ck_dpll1,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  RATE_CKCTL | DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS,
+	.enable_reg	= DSP_IDLECT2,
+	.enable_bit	= EN_PERCK,
+	.rate_offset	= CKCTL_PERDIV_OFFSET,
+	.recalc		= &followparent_recalc,
+	//.recalc		= &ckctl_recalc,
+};
+
+static struct clk dspxor_ck = {
+	.name		= "dspxor_ck",
+	.parent		= &ck_ref,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS,
+	.enable_reg	= DSP_IDLECT2,
+	.enable_bit	= EN_XORPCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dsptim_ck = {
+	.name		= "dsptim_ck",
+	.parent		= &ck_ref,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS,
+	.enable_reg	= DSP_IDLECT2,
+	.enable_bit	= EN_DSPTIMCK,
+	.recalc		= &followparent_recalc,
+};
+
 static struct clk tc_ck = {
 	.name		= "tc_ck",
 	.parent		= &ck_dpll1,
@@ -226,7 +261,7 @@ static struct clk tc_ck = {
 static struct clk arminth_ck1510 = {
 	.name		= "arminth_ck",
 	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP1510,
+	.flags		= CLOCK_IN_OMAP1510 | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
 	/* Note: On 1510 the frequency follows TC_CK
 	 *
@@ -237,7 +272,7 @@ static struct clk arminth_ck1510 = {
 static struct clk tipb_ck = {
 	.name		= "tibp_ck",
 	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP1510,
+	.flags		= CLOCK_IN_OMAP1510 | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
 };
 
@@ -271,14 +306,15 @@ static struct clk tc2_ck = {
 static struct clk dma_ck = {
 	.name		= "dma_ck",
 	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk dma_lcdfree_ck = {
 	.name		= "dma_lcdfree_ck",
 	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP16XX,
+	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
 };
 
@@ -303,14 +339,14 @@ static struct clk lb_ck = {
 static struct clk rhea1_ck = {
 	.name		= "rhea1_ck",
 	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP16XX,
+	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk rhea2_ck = {
 	.name		= "rhea2_ck",
 	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP16XX,
+	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
 };
 
@@ -325,43 +361,55 @@ static struct clk lcd_ck = {
 	.recalc		= &ckctl_recalc,
 };
 
-static struct clk uart1_ck = {
+static struct clk uart1_1510 = {
+	.name		= "uart1_ck",
+	/* Direct from ULPD, no parent */
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | ALWAYS_ENABLED,
+	.enable_reg	= MOD_CONF_CTRL_0,
+	.enable_bit	= 29,	/* Chooses between 12MHz and 48MHz */
+	.set_rate	= &set_uart_rate,
+	.recalc		= &uart_recalc,
+};
+
+static struct clk uart1_16xx = {
 	.name		= "uart1_ck",
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_FIXED | ENABLE_REG_32BIT,
+	.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED | ENABLE_REG_32BIT,
 	.enable_reg	= MOD_CONF_CTRL_0,
 	.enable_bit	= 29,
-	/* (Only on 1510)
-	 * The "enable bit" actually chooses between 48MHz and 12MHz.
-	 */
 };
 
 static struct clk uart2_ck = {
 	.name		= "uart2_ck",
 	/* Direct from ULPD, no parent */
-	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_FIXED | ENABLE_REG_32BIT,
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | ENABLE_REG_32BIT,
 	.enable_reg	= MOD_CONF_CTRL_0,
-	.enable_bit	= 30,
-	/* (for both 1510 and 16xx)
-	 * The "enable bit" actually chooses between 48MHz and 12MHz/32kHz.
-	 */
+	.enable_bit	= 30,	/* Chooses between 12MHz and 48MHz */
+	.set_rate	= &set_uart_rate,
+	.recalc		= &uart_recalc,
 };
 
-static struct clk uart3_ck = {
+static struct clk uart3_1510 = {
+	.name		= "uart3_ck",
+	/* Direct from ULPD, no parent */
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | ALWAYS_ENABLED,
+	.enable_reg	= MOD_CONF_CTRL_0,
+	.enable_bit	= 31,	/* Chooses between 12MHz and 48MHz */
+	.set_rate	= &set_uart_rate,
+	.recalc		= &uart_recalc,
+};
+
+static struct clk uart3_16xx = {
 	.name		= "uart3_ck",
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_FIXED | ENABLE_REG_32BIT,
+	.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED | ENABLE_REG_32BIT,
 	.enable_reg	= MOD_CONF_CTRL_0,
 	.enable_bit	= 31,
-	/* (Only on 1510)
-	 * The "enable bit" actually chooses between 48MHz and 12MHz.
-	 */
 };
 
 static struct clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
@@ -480,6 +528,9 @@ static struct clk *  onchip_clks[] = {
 	/* CK_GEN2 clocks */
 	&dsp_ck,
 	&dspmmu_ck,
+	&dspper_ck,
+	&dspxor_ck,
+	&dsptim_ck,
 	/* CK_GEN3 clocks */
 	&tc_ck,
 	&tipb_ck,
@@ -494,9 +545,11 @@ static struct clk *  onchip_clks[] = {
 	&rhea2_ck,
 	&lcd_ck,
 	/* ULPD clocks */
-	&uart1_ck,
+	&uart1_1510,
+	&uart1_16xx,
 	&uart2_ck,
-	&uart3_ck,
+	&uart3_1510,
+	&uart3_16xx,
 	&usb_clko,
 	&usb_hhc_ck1510, &usb_hhc_ck16xx,
 	&mclk_1510,  &mclk_16xx,
@@ -547,14 +600,34 @@ int __clk_enable(struct clk *clk)
 		return 0;
 	}
 
+	if (clk->flags & DSP_DOMAIN_CLOCK) {
+		__clk_use(&api_ck);
+	}
+
 	if (clk->flags & ENABLE_REG_32BIT) {
-		regval32 = omap_readl(clk->enable_reg);
-		regval32 |= (1 << clk->enable_bit);
-		omap_writel(regval32, clk->enable_reg);
+		if (clk->flags & VIRTUAL_IO_ADDRESS) {
+			regval32 = __raw_readl(clk->enable_reg);
+			regval32 |= (1 << clk->enable_bit);
+			__raw_writel(regval32, clk->enable_reg);
+		} else {
+			regval32 = omap_readl(clk->enable_reg);
+			regval32 |= (1 << clk->enable_bit);
+			omap_writel(regval32, clk->enable_reg);
+		}
 	} else {
-		regval16 = omap_readw(clk->enable_reg);
-		regval16 |= (1 << clk->enable_bit);
-		omap_writew(regval16, clk->enable_reg);
+		if (clk->flags & VIRTUAL_IO_ADDRESS) {
+			regval16 = __raw_readw(clk->enable_reg);
+			regval16 |= (1 << clk->enable_bit);
+			__raw_writew(regval16, clk->enable_reg);
+		} else {
+			regval16 = omap_readw(clk->enable_reg);
+			regval16 |= (1 << clk->enable_bit);
+			omap_writew(regval16, clk->enable_reg);
+		}
+	}
+
+	if (clk->flags & DSP_DOMAIN_CLOCK) {
+		__clk_unuse(&api_ck);
 	}
 
 	return 0;
@@ -569,14 +642,34 @@ void __clk_disable(struct clk *clk)
 	if (clk->enable_reg == 0)
 		return;
 
+	if (clk->flags & DSP_DOMAIN_CLOCK) {
+		__clk_use(&api_ck);
+	}
+
 	if (clk->flags & ENABLE_REG_32BIT) {
-		regval32 = omap_readl(clk->enable_reg);
-		regval32 &= ~(1 << clk->enable_bit);
-		omap_writel(regval32, clk->enable_reg);
+		if (clk->flags & VIRTUAL_IO_ADDRESS) {
+			regval32 = __raw_readl(clk->enable_reg);
+			regval32 &= ~(1 << clk->enable_bit);
+			__raw_writel(regval32, clk->enable_reg);
+		} else {
+			regval32 = omap_readl(clk->enable_reg);
+			regval32 &= ~(1 << clk->enable_bit);
+			omap_writel(regval32, clk->enable_reg);
+		}
 	} else {
-		regval16 = omap_readw(clk->enable_reg);
-		regval16 &= ~(1 << clk->enable_bit);
-		omap_writew(regval16, clk->enable_reg);
+		if (clk->flags & VIRTUAL_IO_ADDRESS) {
+			regval16 = __raw_readw(clk->enable_reg);
+			regval16 &= ~(1 << clk->enable_bit);
+			__raw_writew(regval16, clk->enable_reg);
+		} else {
+			regval16 = omap_readw(clk->enable_reg);
+			regval16 &= ~(1 << clk->enable_bit);
+			omap_writew(regval16, clk->enable_reg);
+		}
+	}
+
+	if (clk->flags & DSP_DOMAIN_CLOCK) {
+		__clk_unuse(&api_ck);
 	}
 }
 
@@ -766,6 +859,33 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate)
 	return dsor_exp;
 }
 
+
+static void ckctl_recalc(struct clk *  clk)
+{
+	int dsor;
+
+	/* Calculate divisor encoded as 2-bit exponent */
+	if (clk->flags & DSP_DOMAIN_CLOCK) {
+		/* The clock control bits are in DSP domain,
+		 * so api_ck is needed for access.
+		 * Note that DSP_CKCTL virt addr = phys addr, so
+		 * we must use __raw_readw() instead of omap_readw().
+		 */
+		__clk_use(&api_ck);
+		dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset));
+		__clk_unuse(&api_ck);
+	} else {
+		dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
+	}
+	if (unlikely(clk->rate == clk->parent->rate / dsor))
+		return; /* No change, quick exit */
+	clk->rate = clk->parent->rate / dsor;
+
+	if (unlikely(clk->flags & RATE_PROPAGATES))
+		propagate_rate(clk);
+}
+
+
 long clk_round_rate(struct clk *clk, unsigned long rate)
 {
 	int dsor_exp;
@@ -826,6 +946,9 @@ static int select_table_rate(struct clk *  clk, unsigned long rate)
 	if (!ptr->rate)
 		return -EINVAL;
 
+	if (!ptr->rate)
+		return -EINVAL;
+
 	if (unlikely(ck_dpll1.rate == 0)) {
 		omap_writew(ptr->dpllctl_val, DPLL_CTL);
 		ck_dpll1.rate = ptr->pll_rate;
@@ -921,6 +1044,23 @@ static unsigned calc_ext_dsor(unsigned long rate)
 	return dsor;
 }
 
+/* Only needed on 1510 */
+static int set_uart_rate(struct clk * clk, unsigned long rate)
+{
+	unsigned int val;
+
+	val = omap_readl(clk->enable_reg);
+	if (rate == 12000000)
+		val &= ~(1 << clk->enable_bit);
+	else if (rate == 48000000)
+		val |= (1 << clk->enable_bit);
+	else
+		return -EINVAL;
+	omap_writel(val, clk->enable_reg);
+	clk->rate = rate;
+
+	return 0;
+}
 
 static int set_ext_clk_rate(struct clk *  clk, unsigned long rate)
 {
@@ -985,7 +1125,18 @@ void clk_unregister(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_unregister);
 
-
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+/*
+ * Resets some clocks that may be left on from bootloader,
+ * but leaves serial clocks on. See also omap_late_clk_reset().
+ */
+static inline void omap_early_clk_reset(void)
+{
+	//omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
+}
+#else
+#define omap_early_clk_reset()	{}
+#endif
 
 int __init clk_init(void)
 {
@@ -993,6 +1144,8 @@ int __init clk_init(void)
 	const struct omap_clock_config *info;
 	int crystal_type = 0; /* Default 12 MHz */
 
+	omap_early_clk_reset();
+
 	for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) {
 		if (((*clkp)->flags &CLOCK_IN_OMAP1510) && cpu_is_omap1510()) {
 			clk_register(*clkp);
@@ -1023,9 +1176,42 @@ int __init clk_init(void)
 		ck_ref.rate = 19200000;
 #endif
 
+	printk("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
+	       omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
+	       omap_readw(ARM_CKCTL));
+
 	/* We want to be in syncronous scalable mode */
 	omap_writew(0x1000, ARM_SYSST);
 
+#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
+	/* Use values set by bootloader. Determine PLL rate and recalculate
+	 * dependent clocks as if kernel had changed PLL or divisors.
+	 */
+	{
+		unsigned pll_ctl_val = omap_readw(DPLL_CTL);
+
+		ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */
+		if (pll_ctl_val & 0x10) {
+			/* PLL enabled, apply multiplier and divisor */
+			if (pll_ctl_val & 0xf80)
+				ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7;
+			ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
+		} else {
+			/* PLL disabled, apply bypass divisor */
+			switch (pll_ctl_val & 0xc) {
+			case 0:
+				break;
+			case 0x4:
+				ck_dpll1.rate /= 2;
+				break;
+			default:
+				ck_dpll1.rate /= 4;
+				break;
+			}
+		}
+	}
+	propagate_rate(&ck_dpll1);
+#else
 	/* Find the highest supported frequency and enable it */
 	if (select_table_rate(&virtual_ck_mpu, ~0)) {
 		printk(KERN_ERR "System frequencies not set. Check your config.\n");
@@ -1034,12 +1220,13 @@ int __init clk_init(void)
 		omap_writew(0x1005, ARM_CKCTL);
 		ck_dpll1.rate = 60000000;
 		propagate_rate(&ck_dpll1);
-		printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): %ld/%ld/%ld\n",
-		       ck_ref.rate, ck_dpll1.rate, arm_ck.rate);
 	}
-
+#endif
 	/* Cache rates for clocks connected to ck_ref (not dpll1) */
 	propagate_rate(&ck_ref);
+	printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld/%ld MHz\n",
+	       ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
+	       ck_dpll1.rate, arm_ck.rate);
 
 #ifdef CONFIG_MACH_OMAP_PERSEUS2
 	/* Select slicer output as OMAP input clock */
@@ -1074,3 +1261,63 @@ int __init clk_init(void)
 
 	return 0;
 }
+
+
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+
+static int __init omap_late_clk_reset(void)
+{
+	/* Turn off all unused clocks */
+	struct clk *p;
+	__u32 regval32;
+
+	omap_writew(0, SOFT_REQ_REG);
+	omap_writew(0, SOFT_REQ_REG2);
+
+	list_for_each_entry(p, &clocks, node) {
+		if (p->usecount > 0 || (p->flags & ALWAYS_ENABLED) ||
+			p->enable_reg == 0)
+			continue;
+
+		/* Assume no DSP clocks have been activated by bootloader */
+		if (p->flags & DSP_DOMAIN_CLOCK)
+			continue;
+
+		/* Is the clock already disabled? */
+		if (p->flags & ENABLE_REG_32BIT) {
+			if (p->flags & VIRTUAL_IO_ADDRESS)
+				regval32 = __raw_readl(p->enable_reg);
+			else
+				regval32 = omap_readl(p->enable_reg);
+		} else {
+			if (p->flags & VIRTUAL_IO_ADDRESS)
+				regval32 = __raw_readw(p->enable_reg);
+			else
+				regval32 = omap_readw(p->enable_reg);
+		}
+
+		if ((regval32 & (1 << p->enable_bit)) == 0)
+			continue;
+
+		/* FIXME: This clock seems to be necessary but no-one
+		 * has asked for its activation. */
+		if (p == &tc2_ck         // FIX: pm.c (SRAM), CCP, Camera
+		    || p == &ck_dpll1out // FIX: SoSSI, SSR
+		    || p == &arm_gpio_ck // FIX: GPIO code for 1510
+		    ) {
+			printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n",
+			       p->name);
+			continue;
+		}
+
+		printk(KERN_INFO "Disabling unused clock \"%s\"... ", p->name);
+		__clk_disable(p);
+		printk(" done\n");
+	}
+
+	return 0;
+}
+
+late_initcall(omap_late_clk_reset);
+
+#endif
diff --git a/arch/arm/mach-omap/clock.h b/arch/arm/plat-omap/clock.h
index 08c0ddde1835..a89e1e8c2519 100644
--- a/arch/arm/mach-omap/clock.h
+++ b/arch/arm/plat-omap/clock.h
@@ -1,5 +1,5 @@
 /*
- *  linux/arch/arm/mach-omap/clock.h
+ *  linux/arch/arm/plat-omap/clock.h
  *
  *  Copyright (C) 2004 Nokia corporation
  *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
@@ -52,6 +52,8 @@ struct mpu_rate {
 #define CLOCK_IN_OMAP16XX	64
 #define CLOCK_IN_OMAP1510	128
 #define CLOCK_IN_OMAP730	256
+#define DSP_DOMAIN_CLOCK	512
+#define VIRTUAL_IO_ADDRESS	1024
 
 /* ARM_CKCTL bit shifts */
 #define CKCTL_PERDIV_OFFSET	0
@@ -63,6 +65,8 @@ struct mpu_rate {
 /*#define ARM_TIMXO		12*/
 #define EN_DSPCK		13
 /*#define ARM_INTHCK_SEL	14*/ /* Divide-by-2 for mpu inth_ck */
+/* DSP_CKCTL bit shifts */
+#define CKCTL_DSPPERDIV_OFFSET	0
 
 /* ARM_IDLECT1 bit shifts */
 /*#define IDLWDT_ARM	0*/
@@ -96,6 +100,9 @@ struct mpu_rate {
 #define EN_TC1_CK	2
 #define EN_TC2_CK	4
 
+/* DSP_IDLECT2 bit shifts (0,1,2 are same as for ARM_IDLECT2) */
+#define EN_DSPTIMCK	5
+
 /* Various register defines for clock controls scattered around OMAP chip */
 #define USB_MCLK_EN_BIT		4	/* In ULPD_CLKC_CTRL */
 #define USB_HOST_HHC_UHOST_EN	9	/* In MOD_CONF_CTRL_0 */
@@ -103,7 +110,8 @@ struct mpu_rate {
 #define COM_ULPD_PLL_CLK_REQ	1	/* In COM_CLK_DIV_CTRL_SEL */
 #define SWD_CLK_DIV_CTRL_SEL	0xfffe0874
 #define COM_CLK_DIV_CTRL_SEL	0xfffe0878
-
+#define SOFT_REQ_REG		0xfffe0834
+#define SOFT_REQ_REG2		0xfffe0880
 
 int clk_register(struct clk *clk);
 void clk_unregister(struct clk *clk);
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
new file mode 100644
index 000000000000..ea967a8f6ce5
--- /dev/null
+++ b/arch/arm/plat-omap/common.c
@@ -0,0 +1,135 @@
+/*
+ * linux/arch/arm/plat-omap/common.c
+ *
+ * Code common to all OMAP machines.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/console.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+
+#include <asm/hardware.h>
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/clock.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/fpga.h>
+
+#include "clock.h"
+
+#define NO_LENGTH_CHECK 0xffffffff
+
+extern int omap_bootloader_tag_len;
+extern u8 omap_bootloader_tag[];
+
+struct omap_board_config_kernel *omap_board_config;
+int omap_board_config_size = 0;
+
+static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
+{
+	struct omap_board_config_kernel *kinfo = NULL;
+	int i;
+
+#ifdef CONFIG_OMAP_BOOT_TAG
+	struct omap_board_config_entry *info = NULL;
+
+	if (omap_bootloader_tag_len > 4)
+		info = (struct omap_board_config_entry *) omap_bootloader_tag;
+	while (info != NULL) {
+		u8 *next;
+
+		if (info->tag == tag) {
+			if (skip == 0)
+				break;
+			skip--;
+		}
+
+		if ((info->len & 0x03) != 0) {
+			/* We bail out to avoid an alignment fault */
+			printk(KERN_ERR "OMAP peripheral config: Length (%d) not word-aligned (tag %04x)\n",
+			       info->len, info->tag);
+			return NULL;
+		}
+		next = (u8 *) info + sizeof(*info) + info->len;
+		if (next >= omap_bootloader_tag + omap_bootloader_tag_len)
+			info = NULL;
+		else
+			info = (struct omap_board_config_entry *) next;
+	}
+	if (info != NULL) {
+		/* Check the length as a lame attempt to check for
+		 * binary inconsistancy. */
+		if (len != NO_LENGTH_CHECK) {
+			/* Word-align len */
+			if (len & 0x03)
+				len = (len + 3) & ~0x03;
+			if (info->len != len) {
+				printk(KERN_ERR "OMAP peripheral config: Length mismatch with tag %x (want %d, got %d)\n",
+				       tag, len, info->len);
+				return NULL;
+			}
+		}
+		if (len_out != NULL)
+			*len_out = info->len;
+		return info->data;
+	}
+#endif
+	/* Try to find the config from the board-specific structures
+	 * in the kernel. */
+	for (i = 0; i < omap_board_config_size; i++) {
+		if (omap_board_config[i].tag == tag) {
+			kinfo = &omap_board_config[i];
+			break;
+		}
+	}
+	if (kinfo == NULL)
+		return NULL;
+	return kinfo->data;
+}
+
+const void *__omap_get_config(u16 tag, size_t len, int nr)
+{
+        return get_config(tag, len, nr, NULL);
+}
+EXPORT_SYMBOL(__omap_get_config);
+
+const void *omap_get_var_config(u16 tag, size_t *len)
+{
+        return get_config(tag, NO_LENGTH_CHECK, 0, len);
+}
+EXPORT_SYMBOL(omap_get_var_config);
+
+static int __init omap_add_serial_console(void)
+{
+	const struct omap_serial_console_config *info;
+
+	info = omap_get_config(OMAP_TAG_SERIAL_CONSOLE,
+			       struct omap_serial_console_config);
+	if (info != NULL && info->console_uart) {
+		static char speed[11], *opt = NULL;
+
+		if (info->console_speed) {
+			snprintf(speed, sizeof(speed), "%u", info->console_speed);
+			opt = speed;
+		}
+		return add_preferred_console("ttyS", info->console_uart - 1, opt);
+	}
+	return 0;
+}
+console_initcall(omap_add_serial_console);
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
new file mode 100644
index 000000000000..409aac2c4b9d
--- /dev/null
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -0,0 +1,128 @@
+/*
+ *  linux/arch/arm/plat-omap/cpu-omap.c
+ *
+ *  CPU frequency scaling for OMAP
+ *
+ *  Copyright (C) 2005 Nokia Corporation
+ *  Written by Tony Lindgren <tony@atomide.com>
+ *
+ *  Based on cpu-sa1110.c, Copyright (C) 2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#include <asm/hardware/clock.h>
+
+/* TODO: Add support for SDRAM timing changes */
+
+int omap_verify_speed(struct cpufreq_policy *policy)
+{
+	struct clk * mpu_clk;
+
+	if (policy->cpu)
+		return -EINVAL;
+
+	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+				     policy->cpuinfo.max_freq);
+	mpu_clk = clk_get(NULL, "mpu");
+	if (IS_ERR(mpu_clk))
+		return PTR_ERR(mpu_clk);
+	policy->min = clk_round_rate(mpu_clk, policy->min * 1000) / 1000;
+	policy->max = clk_round_rate(mpu_clk, policy->max * 1000) / 1000;
+	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+				     policy->cpuinfo.max_freq);
+	clk_put(mpu_clk);
+
+	return 0;
+}
+
+unsigned int omap_getspeed(unsigned int cpu)
+{
+	struct clk * mpu_clk;
+	unsigned long rate;
+
+	if (cpu)
+		return 0;
+
+	mpu_clk = clk_get(NULL, "mpu");
+	if (IS_ERR(mpu_clk))
+		return 0;
+	rate = clk_get_rate(mpu_clk) / 1000;
+	clk_put(mpu_clk);
+
+	return rate;
+}
+
+static int omap_target(struct cpufreq_policy *policy,
+		       unsigned int target_freq,
+		       unsigned int relation)
+{
+	struct clk * mpu_clk;
+	struct cpufreq_freqs freqs;
+	int ret = 0;
+
+	mpu_clk = clk_get(NULL, "mpu");
+	if (IS_ERR(mpu_clk))
+		return PTR_ERR(mpu_clk);
+
+	freqs.old = omap_getspeed(0);
+	freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000;
+	freqs.cpu = 0;
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	ret = clk_set_rate(mpu_clk, target_freq * 1000);
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	clk_put(mpu_clk);
+
+	return ret;
+}
+
+static int __init omap_cpu_init(struct cpufreq_policy *policy)
+{
+	struct clk * mpu_clk;
+
+	mpu_clk = clk_get(NULL, "mpu");
+	if (IS_ERR(mpu_clk))
+		return PTR_ERR(mpu_clk);
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+	policy->cur = policy->min = policy->max = omap_getspeed(0);
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+	policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000;
+	policy->cpuinfo.max_freq = clk_round_rate(mpu_clk, 216000000) / 1000;
+	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	clk_put(mpu_clk);
+
+	return 0;
+}
+
+static struct cpufreq_driver omap_driver = {
+	.flags		= CPUFREQ_STICKY,
+	.verify		= omap_verify_speed,
+	.target		= omap_target,
+	.get		= omap_getspeed,
+	.init		= omap_cpu_init,
+	.name		= "omap",
+};
+
+static int __init omap_cpufreq_init(void)
+{
+	return cpufreq_register_driver(&omap_driver);
+}
+
+arch_initcall(omap_cpufreq_init);
diff --git a/arch/arm/mach-omap/dma.c b/arch/arm/plat-omap/dma.c
index 7a9ebe80d6f8..c0a5c2fa42bd 100644
--- a/arch/arm/mach-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/omap/dma.c
+ * linux/arch/arm/plat-omap/dma.c
  *
  * Copyright (C) 2003 Nokia Corporation
  * Author: Juha Yrjölä <juha.yrjola@nokia.com>
@@ -794,10 +794,6 @@ static void set_b1_regs(void)
 	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
 	/* Always set the source port as SDRAM for now*/
 	w &= ~(0x03 << 6);
-	if (lcd_dma.ext_ctrl)
-		w |= 1 << 8;
-	else
-		w &= ~(1 << 8);
 	if (lcd_dma.callback != NULL)
 		w |= 1 << 1;            /* Block interrupt enable */
 	else
@@ -889,9 +885,15 @@ void omap_enable_lcd_dma(void)
 	 */
 	if (enable_1510_mode || !lcd_dma.ext_ctrl)
 		return;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+	w |= 1 << 8;
+	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+
 	w = omap_readw(OMAP1610_DMA_LCD_CCR);
 	w |= 1 << 7;
 	omap_writew(w, OMAP1610_DMA_LCD_CCR);
+
 	lcd_dma.active = 1;
 }
 
@@ -922,10 +924,19 @@ void omap_setup_lcd_dma(void)
 
 void omap_stop_lcd_dma(void)
 {
+	u16 w;
+
 	lcd_dma.active = 0;
-	if (!enable_1510_mode && lcd_dma.ext_ctrl)
-		omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~(1 << 7),
-			    OMAP1610_DMA_LCD_CCR);
+	if (enable_1510_mode || !lcd_dma.ext_ctrl)
+		return;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CCR);
+	w &= ~(1 << 7);
+	omap_writew(w, OMAP1610_DMA_LCD_CCR);
+
+	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+	w &= ~(1 << 8);
+	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
 }
 
 /*
@@ -972,6 +983,25 @@ dma_addr_t omap_get_dma_dst_pos(int lch)
 			     (OMAP_DMA_CDSA_U(lch) << 16));
 }
 
+int omap_dma_running(void)
+{
+	int lch;
+
+	/* Check if LCD DMA is running */
+	if (cpu_is_omap16xx())
+		if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
+			return 1;
+
+	for (lch = 0; lch < dma_chan_count; lch++) {
+		u16 w;
+
+		w = omap_readw(OMAP_DMA_CCR(lch));
+		if (w & OMAP_DMA_CCR_EN)
+			return 1;
+	}
+	return 0;
+}
+
 static int __init omap_init_dma(void)
 {
 	int ch, r;
diff --git a/arch/arm/mach-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 9045dfd469ad..1c85b4e536c2 100644
--- a/arch/arm/mach-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1,5 +1,5 @@
 /*
- *  linux/arch/arm/mach-omap/gpio.c
+ *  linux/arch/arm/plat-omap/gpio.c
  *
  * Support functions for OMAP GPIO
  *
diff --git a/arch/arm/mach-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 7c4ad7713091..43567d5edddb 100644
--- a/arch/arm/mach-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/omap/mcbsp.c
+ * linux/arch/arm/plat-omap/mcbsp.c
  *
  * Copyright (C) 2004 Nokia Corporation
  * Author: Samuel Ortiz <samuel.ortiz@nokia.com>
@@ -66,6 +66,7 @@ struct omap_mcbsp {
 static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT];
 static struct clk *mcbsp_dsp_ck = 0;
 static struct clk *mcbsp_api_ck = 0;
+static struct clk *mcbsp_dspxor_ck = 0;
 
 
 static void omap_mcbsp_dump_reg(u8 id)
@@ -175,7 +176,7 @@ static int omap_mcbsp_check(unsigned int id)
 		return 0;
 	}
 
-	if (cpu_is_omap1510() || cpu_is_omap1610() || cpu_is_omap1710()) {
+	if (cpu_is_omap1510() || cpu_is_omap16xx()) {
 		if (id > OMAP_MAX_MCBSP_COUNT) {
 			printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1);
 			return -1;
@@ -191,15 +192,12 @@ static int omap_mcbsp_check(unsigned int id)
 
 static void omap_mcbsp_dsp_request(void)
 {
-	if (cpu_is_omap1510() || cpu_is_omap1610() || cpu_is_omap1710()) {
-		omap_writew((omap_readw(ARM_RSTCT1) | (1 << 1) | (1 << 2)),
-			    ARM_RSTCT1);
-		clk_enable(mcbsp_dsp_ck);
-		clk_enable(mcbsp_api_ck);
+	if (cpu_is_omap1510() || cpu_is_omap16xx()) {
+		clk_use(mcbsp_dsp_ck);
+		clk_use(mcbsp_api_ck);
 
 		/* enable 12MHz clock to mcbsp 1 & 3 */
-		__raw_writew(__raw_readw(DSP_IDLECT2) | (1 << EN_XORPCK),
-			     DSP_IDLECT2);
+		clk_use(mcbsp_dspxor_ck);
 		__raw_writew(__raw_readw(DSP_RSTCT2) | 1 | 1 << 1,
 			     DSP_RSTCT2);
 	}
@@ -207,10 +205,13 @@ static void omap_mcbsp_dsp_request(void)
 
 static void omap_mcbsp_dsp_free(void)
 {
-	/* Useless for now */
+	if (cpu_is_omap1510() || cpu_is_omap16xx()) {
+		clk_unuse(mcbsp_dspxor_ck);
+		clk_unuse(mcbsp_dsp_ck);
+		clk_unuse(mcbsp_api_ck);
+	}
 }
 
-
 int omap_mcbsp_request(unsigned int id)
 {
 	int err;
@@ -350,6 +351,73 @@ void omap_mcbsp_stop(unsigned int id)
 }
 
 
+/* polled mcbsp i/o operations */
+int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
+{
+	u32 base = mcbsp[id].io_base;
+	writew(buf, base + OMAP_MCBSP_REG_DXR1);
+	/* if frame sync error - clear the error */
+	if (readw(base + OMAP_MCBSP_REG_SPCR2) & XSYNC_ERR) {
+		/* clear error */
+		writew(readw(base + OMAP_MCBSP_REG_SPCR2) & (~XSYNC_ERR),
+		       base + OMAP_MCBSP_REG_SPCR2);
+		/* resend */
+		return -1;
+	} else {
+		/* wait for transmit confirmation */
+		int attemps = 0;
+		while (!(readw(base + OMAP_MCBSP_REG_SPCR2) & XRDY)) {
+			if (attemps++ > 1000) {
+				writew(readw(base + OMAP_MCBSP_REG_SPCR2) &
+				       (~XRST),
+				       base + OMAP_MCBSP_REG_SPCR2);
+				udelay(10);
+				writew(readw(base + OMAP_MCBSP_REG_SPCR2) |
+				       (XRST),
+				       base + OMAP_MCBSP_REG_SPCR2);
+				udelay(10);
+				printk(KERN_ERR
+				       " Could not write to McBSP Register\n");
+				return -2;
+			}
+		}
+	}
+	return 0;
+}
+
+int omap_mcbsp_pollread(unsigned int id, u16 * buf)
+{
+	u32 base = mcbsp[id].io_base;
+	/* if frame sync error - clear the error */
+	if (readw(base + OMAP_MCBSP_REG_SPCR1) & RSYNC_ERR) {
+		/* clear error */
+		writew(readw(base + OMAP_MCBSP_REG_SPCR1) & (~RSYNC_ERR),
+		       base + OMAP_MCBSP_REG_SPCR1);
+		/* resend */
+		return -1;
+	} else {
+		/* wait for recieve confirmation */
+		int attemps = 0;
+		while (!(readw(base + OMAP_MCBSP_REG_SPCR1) & RRDY)) {
+			if (attemps++ > 1000) {
+				writew(readw(base + OMAP_MCBSP_REG_SPCR1) &
+				       (~RRST),
+				       base + OMAP_MCBSP_REG_SPCR1);
+				udelay(10);
+				writew(readw(base + OMAP_MCBSP_REG_SPCR1) |
+				       (RRST),
+				       base + OMAP_MCBSP_REG_SPCR1);
+				udelay(10);
+				printk(KERN_ERR
+				       " Could not read from McBSP Register\n");
+				return -2;
+			}
+		}
+	}
+	*buf = readw(base + OMAP_MCBSP_REG_DRR1);
+	return 0;
+}
+
 /*
  * IRQ based word transmission.
  */
@@ -625,10 +693,15 @@ static int __init omap_mcbsp_init(void)
 		return PTR_ERR(mcbsp_dsp_ck);
 	}
 	mcbsp_api_ck = clk_get(0, "api_ck");
-	if (IS_ERR(mcbsp_dsp_ck)) {
+	if (IS_ERR(mcbsp_api_ck)) {
 		printk(KERN_ERR "mcbsp: could not acquire api_ck handle.\n");
 		return PTR_ERR(mcbsp_api_ck);
 	}
+	mcbsp_dspxor_ck = clk_get(0, "dspxor_ck");
+	if (IS_ERR(mcbsp_dspxor_ck)) {
+		printk(KERN_ERR "mcbsp: could not acquire dspxor_ck handle.\n");
+		return PTR_ERR(mcbsp_dspxor_ck);
+	}
 
 #ifdef CONFIG_ARCH_OMAP730
 	if (cpu_is_omap730()) {
@@ -643,7 +716,7 @@ static int __init omap_mcbsp_init(void)
 	}
 #endif
 #if defined(CONFIG_ARCH_OMAP16XX)
-	if (cpu_is_omap1610() || cpu_is_omap1710()) {
+	if (cpu_is_omap16xx()) {
 		mcbsp_info = mcbsp_1610;
 		mcbsp_count = ARRAY_SIZE(mcbsp_1610);
 	}
diff --git a/arch/arm/mach-omap/mux.c b/arch/arm/plat-omap/mux.c
index bcf3c6e5ecd0..ea7b955b9c81 100644
--- a/arch/arm/mach-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/mux.c
+ * linux/arch/arm/plat-omap/mux.c
  *
  * Utility to set the Omap MUX and PULL_DWN registers from a table in mux.h
  *
@@ -53,19 +53,13 @@ omap_cfg_reg(const reg_cfg_t reg_cfg)
 		return -EINVAL;
 	}
 
-	cfg = &reg_cfg_table[reg_cfg];
-
-	/*
-	 * We do a pretty long section here with lock on, but pin muxing
-	 * should only happen on driver init for each driver, so it's not time
-	 * critical.
-	 */
-	spin_lock_irqsave(&mux_spin_lock, flags);
+	cfg = (reg_cfg_set *)&reg_cfg_table[reg_cfg];
 
 	/* Check the mux register in question */
 	if (cfg->mux_reg) {
 		unsigned	tmp1, tmp2;
 
+		spin_lock_irqsave(&mux_spin_lock, flags);
 		reg_orig = omap_readl(cfg->mux_reg);
 
 		/* The mux registers always seem to be 3 bits long */
@@ -80,11 +74,13 @@ omap_cfg_reg(const reg_cfg_t reg_cfg)
 			warn = 1;
 
 		omap_writel(reg, cfg->mux_reg);
+		spin_unlock_irqrestore(&mux_spin_lock, flags);
 	}
 
 	/* Check for pull up or pull down selection on 1610 */
 	if (!cpu_is_omap1510()) {
 		if (cfg->pu_pd_reg && cfg->pull_val) {
+			spin_lock_irqsave(&mux_spin_lock, flags);
 			pu_pd_orig = omap_readl(cfg->pu_pd_reg);
 			mask = 1 << cfg->pull_bit;
 
@@ -100,11 +96,13 @@ omap_cfg_reg(const reg_cfg_t reg_cfg)
 				pu_pd = pu_pd_orig & ~mask;
 			}
 			omap_writel(pu_pd, cfg->pu_pd_reg);
+			spin_unlock_irqrestore(&mux_spin_lock, flags);
 		}
 	}
 
 	/* Check for an associated pull down register */
 	if (cfg->pull_reg) {
+		spin_lock_irqsave(&mux_spin_lock, flags);
 		pull_orig = omap_readl(cfg->pull_reg);
 		mask = 1 << cfg->pull_bit;
 
@@ -121,6 +119,7 @@ omap_cfg_reg(const reg_cfg_t reg_cfg)
 		}
 
 		omap_writel(pull, cfg->pull_reg);
+		spin_unlock_irqrestore(&mux_spin_lock, flags);
 	}
 
 	if (warn) {
@@ -149,8 +148,6 @@ omap_cfg_reg(const reg_cfg_t reg_cfg)
 	}
 #endif
 
-	spin_unlock_irqrestore(&mux_spin_lock, flags);
-
 #ifdef CONFIG_OMAP_MUX_ERRORS
 	return warn ? -ETXTBSY : 0;
 #else
diff --git a/arch/arm/mach-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c
index c9ced134a75d..1fb16f9edfd5 100644
--- a/arch/arm/mach-omap/ocpi.c
+++ b/arch/arm/plat-omap/ocpi.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/ocpi.c
+ * linux/arch/arm/plat-omap/ocpi.c
  *
  * Minimal OCP bus support for omap16xx
  *
diff --git a/arch/arm/mach-omap/pm.c b/arch/arm/plat-omap/pm.c
index 6b03ccdc1e92..e6536b16c385 100644
--- a/arch/arm/mach-omap/pm.c
+++ b/arch/arm/plat-omap/pm.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/pm.c
+ * linux/arch/arm/plat-omap/pm.c
  *
  * OMAP Power Management Routines
  *
diff --git a/arch/arm/mach-omap/sleep.S b/arch/arm/plat-omap/sleep.S
index 4d426d105828..279490ce772b 100644
--- a/arch/arm/mach-omap/sleep.S
+++ b/arch/arm/plat-omap/sleep.S
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/sleep.S
+ * linux/arch/arm/plat-omap/sleep.S
  *
  * Low-level OMAP1510/1610 sleep/wakeUp support
  *
diff --git a/arch/arm/mach-omap/usb.c b/arch/arm/plat-omap/usb.c
index fd483ff9f8fe..25bc4a8dd763 100644
--- a/arch/arm/mach-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-omap/usb.c -- platform level USB initialization
+ * arch/arm/plat-omap/usb.c -- platform level USB initialization
  *
  * Copyright (C) 2004 Texas Instruments, Inc.
  *
@@ -326,7 +326,7 @@ static u64 ohci_dmamask = ~(u32)0;
 static struct resource ohci_resources[] = {
 	{
 		.start	= OMAP_OHCI_BASE,
-		.end	= OMAP_OHCI_BASE + 4096,
+		.end	= OMAP_OHCI_BASE + 4096 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
diff --git a/include/asm-arm/arch-ixp2000/platform.h b/include/asm-arm/arch-ixp2000/platform.h
index 52ded516ea5c..c0caf3e3e6fd 100644
--- a/include/asm-arm/arch-ixp2000/platform.h
+++ b/include/asm-arm/arch-ixp2000/platform.h
@@ -115,6 +115,7 @@ static inline unsigned int ixp2000_is_pcimaster(void)
 }
 
 void ixp2000_map_io(void);
+void ixp2000_uart_init(void);
 void ixp2000_init_irq(void);
 void ixp2000_init_time(unsigned long);
 unsigned long ixp2000_gettimeoffset(void);
diff --git a/include/asm-arm/arch-omap/board-h2.h b/include/asm-arm/arch-omap/board-h2.h
index 60f002b72983..39ca5a31aeea 100644
--- a/include/asm-arm/arch-omap/board-h2.h
+++ b/include/asm-arm/arch-omap/board-h2.h
@@ -34,11 +34,6 @@
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
 #define OMAP1610_ETHR_START		0x04000300
 
-/* Intel STRATA NOR flash at CS3 or CS2B(NAND Boot) */
-#define OMAP_NOR_FLASH_SIZE             SZ_32M
-#define OMAP_NOR_FLASH_START1           0x0C000000 /* CS3 */
-#define OMAP_NOR_FLASH_START2           0x0A000000 /* CS2B */
-
 /* Samsung NAND flash at CS2B or CS3(NAND Boot) */
 #define OMAP_NAND_FLASH_START1           0x0A000000 /* CS2B */
 #define OMAP_NAND_FLASH_START2           0x0C000000 /* CS3 */
diff --git a/include/asm-arm/arch-omap/board-h3.h b/include/asm-arm/arch-omap/board-h3.h
index e4d1cd231731..1b12c1dcc2fa 100644
--- a/include/asm-arm/arch-omap/board-h3.h
+++ b/include/asm-arm/arch-omap/board-h3.h
@@ -30,11 +30,6 @@
 /* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
 #define OMAP1710_ETHR_START		0x04000300
 
-/* Intel STRATA NOR flash at CS3 or CS2B(NAND Boot) */
-#define OMAP_NOR_FLASH_SIZE             SZ_32M
-#define OMAP_NOR_FLASH_START1 		0x0C000000 /* CS3 */
-#define OMAP_NOR_FLASH_START2 		0x0A000000 /* CS2B */
-
 /* Samsung NAND flash at CS2B or CS3(NAND Boot) */
 #define OMAP_NAND_FLASH_START1           0x0A000000 /* CS2B */
 #define OMAP_NAND_FLASH_START2           0x0C000000 /* CS3 */
diff --git a/include/asm-arm/arch-omap/board-osk.h b/include/asm-arm/arch-omap/board-osk.h
index aaa49a0fbd21..2b1a8a4fe44e 100644
--- a/include/asm-arm/arch-omap/board-osk.h
+++ b/include/asm-arm/arch-omap/board-osk.h
@@ -32,10 +32,5 @@
 /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
 #define OMAP_OSK_ETHR_START		0x04800300
 
-/* Micron NOR flash at CS3 mapped to address 0x0 if BM bit is 1 */
-#define OMAP_OSK_NOR_FLASH_BASE		0xD8000000
-#define OMAP_OSK_NOR_FLASH_SIZE		SZ_32M
-#define OMAP_OSK_NOR_FLASH_START	0x00000000
-
 #endif /*  __ASM_ARCH_OMAP_OSK_H */
 
diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h
index 1cefd60b6f2a..95bd625480c1 100644
--- a/include/asm-arm/arch-omap/board.h
+++ b/include/asm-arm/arch-omap/board.h
@@ -16,10 +16,11 @@
 /* Different peripheral ids */
 #define OMAP_TAG_CLOCK		0x4f01
 #define OMAP_TAG_MMC		0x4f02
-#define OMAP_TAG_UART		0x4f03
+#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
 #define OMAP_TAG_USB		0x4f04
 #define OMAP_TAG_LCD		0x4f05
 #define OMAP_TAG_GPIO_SWITCH	0x4f06
+#define OMAP_TAG_UART		0x4f07
 
 #define OMAP_TAG_BOOT_REASON    0x4f80
 #define OMAP_TAG_FLASH_PART	0x4f81
@@ -35,7 +36,7 @@ struct omap_mmc_config {
 	s16 mmc1_switch_pin, mmc2_switch_pin;
 };
 
-struct omap_uart_config {
+struct omap_serial_console_config {
 	u8 console_uart;
 	u32 console_speed;
 };
@@ -82,7 +83,8 @@ struct omap_lcd_config {
  */
 #define OMAP_GPIO_SWITCH_TYPE_COVER		0x0000
 #define OMAP_GPIO_SWITCH_TYPE_CONNECTION	0x0001
-#define OMAP_GPIO_SWITCH_FLAG_INVERTED          0x0001
+#define OMAP_GPIO_SWITCH_FLAG_INVERTED		0x0001
+#define OMAP_GPIO_SWITCH_FLAG_OUTPUT		0x0002
 struct omap_gpio_switch_config {
 	char name[12];
 	u16 gpio;
@@ -99,6 +101,10 @@ struct omap_boot_reason_config {
 	char reason_str[12];
 };
 
+struct omap_uart_config {
+	/* Bit field of UARTs present; bit 0 --> UART1 */
+	unsigned int enabled_uarts;
+};
 
 struct omap_board_config_entry {
 	u16 tag;
diff --git a/arch/arm/mach-omap/common.h b/include/asm-arm/arch-omap/common.h
index 9f62858c0df4..2a676b4f13b5 100644
--- a/arch/arm/mach-omap/common.h
+++ b/include/asm-arm/arch-omap/common.h
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/common.h
+ * linux/include/asm-arm/arch-omap/common.h
  *
  * Header for code common to all OMAP machines.
  *
@@ -29,7 +29,7 @@
 
 struct sys_timer;
 
-extern void omap_map_io(void);
+extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
 extern void omap_serial_init(int ports[]);
 
diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h
index d785248377db..ce114ce5af5d 100644
--- a/include/asm-arm/arch-omap/dma.h
+++ b/include/asm-arm/arch-omap/dma.h
@@ -241,6 +241,7 @@ extern void omap_dma_unlink_lch (int lch_head, int lch_queue);
 extern dma_addr_t omap_get_dma_src_pos(int lch);
 extern dma_addr_t omap_get_dma_dst_pos(int lch);
 extern void omap_clear_dma(int lch);
+extern int omap_dma_running(void);
 
 /* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
 extern int omap_dma_in_1510_mode(void);
diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h
index 37e06c782bdf..48258c7f6541 100644
--- a/include/asm-arm/arch-omap/hardware.h
+++ b/include/asm-arm/arch-omap/hardware.h
@@ -54,6 +54,19 @@
 
 /*
  * ----------------------------------------------------------------------------
+ * Timers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_MPU_TIMER1_BASE	(0xfffec500)
+#define OMAP_MPU_TIMER2_BASE	(0xfffec600)
+#define OMAP_MPU_TIMER3_BASE	(0xfffec700)
+#define MPU_TIMER_FREE		(1 << 6)
+#define MPU_TIMER_CLOCK_ENABLE	(1 << 5)
+#define MPU_TIMER_AR		(1 << 1)
+#define MPU_TIMER_ST		(1 << 0)
+
+/*
+ * ----------------------------------------------------------------------------
  * Clocks
  * ----------------------------------------------------------------------------
  */
@@ -78,6 +91,7 @@
 
 /* DSP clock control */
 #define DSP_CONFIG_REG_BASE     (0xe1008000)
+#define DSP_CKCTL		(DSP_CONFIG_REG_BASE + 0x0)
 #define DSP_IDLECT1		(DSP_CONFIG_REG_BASE + 0x4)
 #define DSP_IDLECT2		(DSP_CONFIG_REG_BASE + 0x8)
 
@@ -88,6 +102,7 @@
  */
 #define ULPD_REG_BASE		(0xfffe0800)
 #define ULPD_IT_STATUS		(ULPD_REG_BASE + 0x14)
+#define ULPD_SETUP_ANALOG_CELL_3	(ULPD_REG_BASE + 0x24)
 #define ULPD_CLOCK_CTRL		(ULPD_REG_BASE + 0x30)
 #	define DIS_USB_PVCI_CLK		(1 << 5)	/* no USB/FAC synch */
 #	define USB_MCLK_EN		(1 << 4)	/* enable W4_USB_CLKO */
@@ -268,17 +283,10 @@
  * Processor specific defines
  * ---------------------------------------------------------------------------
  */
-#ifdef CONFIG_ARCH_OMAP730
-#include "omap730.h"
-#endif
 
-#ifdef CONFIG_ARCH_OMAP1510
+#include "omap730.h"
 #include "omap1510.h"
-#endif
-
-#ifdef CONFIG_ARCH_OMAP16XX
 #include "omap16xx.h"
-#endif
 
 /*
  * ---------------------------------------------------------------------------
diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h
index 6701fd9e5f9b..0d05a7c957d1 100644
--- a/include/asm-arm/arch-omap/irqs.h
+++ b/include/asm-arm/arch-omap/irqs.h
@@ -159,6 +159,7 @@
 #define INT_1610_GPIO_BANK3	(41 + IH2_BASE)
 #define INT_1610_MMC2		(42 + IH2_BASE)
 #define INT_1610_CF		(43 + IH2_BASE)
+#define INT_1610_WAKE_UP_REQ	(46 + IH2_BASE)
 #define INT_1610_GPIO_BANK4	(48 + IH2_BASE)
 #define INT_1610_SPI		(49 + IH2_BASE)
 #define INT_1610_DMA_CH6	(53 + IH2_BASE)
@@ -238,6 +239,8 @@
 #define IH_MPUIO_BASE		(OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
 #define IH_BOARD_BASE		(16 + IH_MPUIO_BASE)
 
+#define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
+
 #ifndef __ASSEMBLY__
 extern void omap_init_irq(void);
 #endif
diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h
index 39f99decbb7b..5bd3f0097fc6 100644
--- a/include/asm-arm/arch-omap/mux.h
+++ b/include/asm-arm/arch-omap/mux.h
@@ -231,7 +231,7 @@ typedef enum {
 	J19_1610_ETM_D6,
 	J18_1610_ETM_D7,
 
-	/* OMAP-1610 GPIO */
+	/* OMAP16XX GPIO */
 	P20_1610_GPIO4,
 	V9_1610_GPIO7,
 	W8_1610_GPIO9,
@@ -241,6 +241,9 @@ typedef enum {
 	AA20_1610_GPIO_41,
 	W19_1610_GPIO48,
 	M7_1610_GPIO62,
+	V14_16XX_GPIO37,
+	R9_16XX_GPIO18,
+	L14_16XX_GPIO49,
 
 	/* OMAP-1610 uWire */
 	V19_1610_UWIRE_SCLK,
@@ -285,12 +288,13 @@ typedef enum {
 	V6_USB2_TXD,
 	W5_USB2_SE0,
 
-	/* UART1 1610 */
-
+	/* 16XX UART */
 	R13_1610_UART1_TX,
-	V14_1610_UART1_RX,
+	V14_16XX_UART1_RX,
 	R14_1610_UART1_CTS,
 	AA15_1610_UART1_RTS,
+	R9_16XX_UART2_RX,
+	L14_16XX_UART3_RX,
 
 	/* I2C OMAP-1610 */
 	I2C_SCL,
@@ -332,7 +336,7 @@ typedef enum {
  * Table of various FUNC_MUX and PULL_DWN combinations for each device.
  * See also reg_cfg_t above for the lookup table.
  */
-static reg_cfg_set __initdata_or_module
+static const reg_cfg_set __initdata_or_module
 reg_cfg_table[] = {
 /*
  *	 description		mux  mode   mux	 pull pull  pull  pu_pd	 pu  dbg
@@ -455,7 +459,7 @@ MUX_CFG("L19_1610_ETM_D0",	 5,   18,    1,	  0,  26,   0,	  0,	 0,  1)
 MUX_CFG("J19_1610_ETM_D6",	 5,    0,    1,	  0,  20,   0,	  0,	 0,  1)
 MUX_CFG("J18_1610_ETM_D7",	 5,   27,    1,	  0,  19,   0,	  0,	 0,  1)
 
-/* OMAP-1610 GPIO */
+/* OMAP16XX GPIO */
 MUX_CFG("P20_1610_GPIO4",	 6,   27,    0,	  1,   7,   0,	  1,	 1,  1)
 MUX_CFG("V9_1610_GPIO7",	 B,   12,    1,	  2,  20,   0,	  2,	 1,  1)
 MUX_CFG("W8_1610_GPIO9",	 B,   21,    0,	  2,  23,   0,	  2,	 1,  1)
@@ -465,6 +469,9 @@ MUX_CFG("V5_1610_GPIO24",	 B,   15,    7,	  2,  21,   0,	  2,	 1,  1)
 MUX_CFG("AA20_1610_GPIO_41",	 9,    9,    7,	  1,  31,   0,	  1,	 1,  1)
 MUX_CFG("W19_1610_GPIO48",	 8,   15,    7,   1,  23,   1,    1,     0,  1)
 MUX_CFG("M7_1610_GPIO62",	10,    0,    0,   4,  24,   0,    4,     0,  1)
+MUX_CFG("V14_16XX_GPIO37",	 9,   18,    7,	  2,   2,   0,	  2,	 2,  0)
+MUX_CFG("R9_16XX_GPIO18",	 C,   18,    7,   3,   0,   0,    3,     0,  0)
+MUX_CFG("L14_16XX_GPIO49",	 6,    3,    7,   0,  31,   0,    0,    31,  0)
 
 /* OMAP-1610 uWire */
 MUX_CFG("V19_1610_UWIRE_SCLK",	 8,    6,    0,	  1,  20,   0,	  1,	 1,  1)
@@ -503,16 +510,17 @@ MUX_CFG("Y10_USB0_SUSP",	 B,   3,     5,	  2,  17,   0,	  2,	 0,  1)
 MUX_CFG("W9_USB2_TXEN",		 B,   9,     1,	 NA,   0,   0,	 NA,	 0,  1)
 MUX_CFG("AA9_USB2_VP",		 B,   6,     1,	 NA,   0,   0,	 NA,	 0,  1)
 MUX_CFG("Y5_USB2_RCV",		 C,  21,     1,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("R8_USB2_VM",		 C,  18,     1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("R9_USB2_VM",		 C,  18,     1,	 NA,   0,   0,	 NA,	 0,  1)
 MUX_CFG("V6_USB2_TXD",		 C,  27,     2,	 NA,   0,   0,	 NA,	 0,  1)
 MUX_CFG("W5_USB2_SE0",		 C,  24,     2,	 NA,   0,   0,	 NA,	 0,  1)
 
-
-/* UART1 */
+/* 16XX UART */
 MUX_CFG("R13_1610_UART1_TX",	 A,  12,     6,	  2,  10,   0,	  2,	10,  1)
-MUX_CFG("V14_1610_UART1_RX",	 9,  18,     0,	  2,   2,   0,	  2,	 2,  1)
+MUX_CFG("V14_16XX_UART1_RX",	 9,  18,     0,	  2,   2,   0,	  2,	 2,  1)
 MUX_CFG("R14_1610_UART1_CTS",	 9,  15,     0,	  2,   1,   0,	  2,	 1,  1)
 MUX_CFG("AA15_1610_UART1_RTS",	 9,  12,     1,	  2,   0,   0,	  2,	 0,  1)
+MUX_CFG("R9_16XX_UART2_RX",	 C,  18,     0,   3,   0,   0,    3,     0,  1)
+MUX_CFG("L14_16XX_UART3_RX",	 6,   3,     0,   0,  31,   0,    0,    31,  1)
 
 /* I2C interface */
 MUX_CFG("I2C_SCL",		 7,  24,     0,	 NA,   0,   0,	 NA,	 0,  0)
diff --git a/include/asm-arm/arch-omap/omap16xx.h b/include/asm-arm/arch-omap/omap16xx.h
index 88b1fe43ae9e..38a9b95e6a33 100644
--- a/include/asm-arm/arch-omap/omap16xx.h
+++ b/include/asm-arm/arch-omap/omap16xx.h
@@ -183,5 +183,37 @@
 #define OMAP16XX_PWL_ENABLE	(OMAP16XX_PWL_BASE + 0x00)
 #define OMAP16XX_PWL_CLK_ENABLE	(OMAP16XX_PWL_BASE + 0x04)
 
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* 32-bit Watchdog timer in OMAP 16XX */
+#define OMAP_16XX_WATCHDOG_BASE        (0xfffeb000)
+#define OMAP_16XX_WIDR         (OMAP_16XX_WATCHDOG_BASE + 0x00)
+#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10)
+#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14)
+#define OMAP_16XX_WCLR         (OMAP_16XX_WATCHDOG_BASE + 0x24)
+#define OMAP_16XX_WCRR         (OMAP_16XX_WATCHDOG_BASE + 0x28)
+#define OMAP_16XX_WLDR         (OMAP_16XX_WATCHDOG_BASE + 0x2c)
+#define OMAP_16XX_WTGR         (OMAP_16XX_WATCHDOG_BASE + 0x30)
+#define OMAP_16XX_WWPS         (OMAP_16XX_WATCHDOG_BASE + 0x34)
+#define OMAP_16XX_WSPR         (OMAP_16XX_WATCHDOG_BASE + 0x48)
+
+#define WCLR_PRE_SHIFT         5
+#define WCLR_PTV_SHIFT         2
+
+#define WWPS_W_PEND_WSPR       (1 << 4)
+#define WWPS_W_PEND_WTGR       (1 << 3)
+#define WWPS_W_PEND_WLDR       (1 << 2)
+#define WWPS_W_PEND_WCRR       (1 << 1)
+#define WWPS_W_PEND_WCLR       (1 << 0)
+
+#define WSPR_ENABLE_0          (0x0000bbbb)
+#define WSPR_ENABLE_1          (0x00004444)
+#define WSPR_DISABLE_0         (0x0000aaaa)
+#define WSPR_DISABLE_1         (0x00005555)
+
 #endif /*  __ASM_ARCH_OMAP16XX_H */
 
diff --git a/include/asm-arm/arch-omap/system.h b/include/asm-arm/arch-omap/system.h
index 17a2c4825f07..ff37bc27e603 100644
--- a/include/asm-arm/arch-omap/system.h
+++ b/include/asm-arm/arch-omap/system.h
@@ -5,7 +5,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 #include <linux/config.h>
+#include <asm/mach-types.h>
 #include <asm/arch/hardware.h>
+#include <asm/mach-types.h>
 
 static inline void arch_idle(void)
 {
@@ -14,7 +16,24 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode)
 {
-	omap_writew(1, ARM_RSTCT1);
+
+#ifdef CONFIG_ARCH_OMAP16XX
+	/*
+	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
+	 * "Global Software Reset Affects Traffic Controller Frequency".
+	 */
+	if (cpu_is_omap5912()) {
+		omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4),
+				 DPLL_CTL);
+		omap_writew(0x8, ARM_RSTCT1);
+	}
+#endif
+#ifdef CONFIG_MACH_VOICEBLUE
+	if (machine_is_voiceblue())
+		voiceblue_reset();
+	else
+#endif
+		omap_writew(1, ARM_RSTCT1);
 }
 
 #endif