diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2008-01-27 22:15:24 +0100 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2008-01-27 22:15:24 +0100 |
| commit | 91525300baf162e83e923b09ca286f9205e21522 (patch) | |
| tree | 115f50c0f270eb1bb032dc520e018d9aa65b957c | |
| parent | i2c-bfin-twi: Register adapter with a specific bus number (diff) | |
| parent | MAINTIANERS: just use Mike gmail e-mail for contact and pawn the serial drive... (diff) | |
| download | linux-91525300baf162e83e923b09ca286f9205e21522.tar.xz linux-91525300baf162e83e923b09ca286f9205e21522.zip | |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (54 commits)
MAINTIANERS: just use Mike gmail e-mail for contact and pawn the serial driver off onto Sonic
[Blackfin] arch: remove old I2C BF54x porting.
[Blackfin] arch: Add the semtimedop syscall. Upstream uClibc doesn't compile without it.
[Blackfin] arch: fix bug kernel boot message: memory information is not reasonable
[Blackfin] arch: use common flash driver to setup partitions rather than the bf5xx-flash driver
[Blackfin] arch: Fix bug - kernel build with Debug option enabled fails to boot up
[Blackfin] arch: Fix bug Only RTC interrupt can wake up deeper sleep core.
[Blackfin] arch: Add proper SW System Reset delay sequence
[Blackfin] arch: Update copyright date
[Blackfin] arch: GPIO API cleanup and anomaly update
[Blackfin] arch: Fix BUG gpio_direction_output API is not compatitable with GENERIC_GPIO API interface
[Blackfin] arch: Initial checkin of the memory protection support.
[Blackfin] arch: set_bfin_dma_config shouldnt set SYNC or RESTART by default - add argument or option
[Blackfin] arch: Add some comments - fix semicolons
[Blackfin] arch: move all code related to CPLB handling into a new subdirectory under kernel/
[Blackfin] arch: print out list of modules if kernel is crashing and tell people if the kernel is tainted
[Blackfin] arch: enable generic GPIO based I2C driver in STAMP-BF533, EZKIT-BF533 and EZKIT-BF561 boards
[Blackfin] arch: Don't oops_in_progress if single step is comming from the kernel
[Blackfin] arch: Fix BUG - kernel sometimes would stuck with KEYBOARD_GPIO on
[Blackfin] arch: update to latest anomaly sheets
...
91 files changed, 2763 insertions, 760 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 59db481c77de..29371226f682 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -758,22 +758,20 @@ S: Supported BLACKFIN RTC DRIVER P: Mike Frysinger -M: michael.frysinger@analog.com M: vapier.adi@gmail.com L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) W: http://blackfin.uclinux.org S: Supported BLACKFIN SERIAL DRIVER -P: Aubrey Li -M: aubrey.li@analog.com +P: Sonic Zhang +M: sonic.zhang@analog.com L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) W: http://blackfin.uclinux.org S: Supported BLACKFIN WATCHDOG DRIVER P: Mike Frysinger -M: michael.frysinger@analog.com M: vapier.adi@gmail.com L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) W: http://blackfin.uclinux.org diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 25232ba08119..fc7ca86ac8bf 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -85,11 +85,26 @@ config BF522 help BF522 Processor Support. +config BF523 + bool "BF523" + help + BF523 Processor Support. + +config BF524 + bool "BF524" + help + BF524 Processor Support. + config BF525 bool "BF525" help BF525 Processor Support. +config BF526 + bool "BF526" + help + BF526 Processor Support. + config BF527 bool "BF527" help @@ -198,7 +213,7 @@ endchoice config BF52x bool - depends on (BF522 || BF525 || BF527) + depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527) default y config BF53x @@ -253,11 +268,6 @@ config MEM_MT48LC32M16A2TG_75 depends on (BFIN527_EZKIT) default y -config BFIN_SHARED_FLASH_ENET - bool - depends on (BFIN533_STAMP) - default y - source "arch/blackfin/mach-bf527/Kconfig" source "arch/blackfin/mach-bf533/Kconfig" source "arch/blackfin/mach-bf561/Kconfig" @@ -317,7 +327,7 @@ config VCO_MULT range 1 64 default "22" if BFIN533_EZKIT default "45" if BFIN533_STAMP - default "20" if (BFIN537_STAMP || BFIN527_EZKIT) + default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT) default "22" if BFIN533_BLUETECHNIX_CM default "20" if BFIN537_BLUETECHNIX_CM default "20" if BFIN561_BLUETECHNIX_CM @@ -354,7 +364,7 @@ config SCLK_DIV range 1 15 default 5 if BFIN533_EZKIT default 5 if BFIN533_STAMP - default 4 if (BFIN537_STAMP || BFIN527_EZKIT) + default 4 if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT) default 5 if BFIN533_BLUETECHNIX_CM default 4 if BFIN537_BLUETECHNIX_CM default 4 if BFIN561_BLUETECHNIX_CM @@ -371,7 +381,10 @@ config SCLK_DIV config MAX_VCO_HZ int default 600000000 if BF522 + default 400000000 if BF523 + default 400000000 if BF524 default 600000000 if BF525 + default 400000000 if BF526 default 600000000 if BF527 default 400000000 if BF531 default 400000000 if BF532 @@ -383,6 +396,8 @@ config MAX_VCO_HZ default 533333333 if BF539 default 600000000 if BF542 default 533333333 if BF544 + default 600000000 if BF547 + default 600000000 if BF548 default 533333333 if BF549 default 600000000 if BF561 @@ -409,6 +424,7 @@ config MEM_SIZE default 32 if BFIN533_EZKIT default 64 if BFIN527_EZKIT default 64 if BFIN537_STAMP + default 64 if BFIN548_EZKIT default 64 if BFIN561_EZKIT default 128 if BFIN533_STAMP default 64 if PNAV10 @@ -416,6 +432,7 @@ config MEM_SIZE config MEM_ADD_WIDTH int "SDRAM Memory Address Width" + depends on (!BF54x) default 9 if BFIN533_EZKIT default 9 if BFIN561_EZKIT default 9 if H8606_HVSISTEMAS @@ -424,6 +441,19 @@ config MEM_ADD_WIDTH default 11 if BFIN533_STAMP default 10 if PNAV10 + +choice + prompt "DDR SDRAM Chip Type" + depends on BFIN548_EZKIT + default MEM_MT46V32M16_5B + +config MEM_MT46V32M16_6T + bool "MT46V32M16_6T" + +config MEM_MT46V32M16_5B + bool "MT46V32M16_5B" +endchoice + config ENET_FLASH_PIN int "PF port/pin used for flash and ethernet sharing" depends on (BFIN533_STAMP) @@ -448,40 +478,6 @@ config BOOT_LOAD memory region is used to capture NULL pointer references as well as some core kernel functions. -comment "LED Status Indicators" - depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM) - -config BFIN_ALIVE_LED - bool "Enable Board Alive" - depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM) - default n - help - Blink the LEDs you select when the kernel is running. Helps detect - a hung kernel. - -config BFIN_ALIVE_LED_NUM - int "LED" - depends on BFIN_ALIVE_LED - range 1 3 if BFIN533_STAMP - default "3" if BFIN533_STAMP - help - Select the LED (marked on the board) for you to blink. - -config BFIN_IDLE_LED - bool "Enable System Load/Idle LED" - depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM) - default n - help - Blinks the LED you select when to determine kernel load. - -config BFIN_IDLE_LED_NUM - int "LED" - depends on BFIN_IDLE_LED - range 1 3 if BFIN533_STAMP - default "2" if BFIN533_STAMP - help - Select the LED (marked on the board) for you to blink. - choice prompt "Blackfin Exception Scratch Register" default BFIN_SCRATCH_REG_RETN @@ -528,41 +524,6 @@ config BFIN_SCRATCH_REG_CYCLES endchoice -# -# Sorry - but you need to put the hex address here - -# - -# Flag Data register -config BFIN_ALIVE_LED_PORT - hex - default 0xFFC00700 if (BFIN533_STAMP) - -# Peripheral Flag Direction Register -config BFIN_ALIVE_LED_DPORT - hex - default 0xFFC00730 if (BFIN533_STAMP) - -config BFIN_ALIVE_LED_PIN - hex - default 0x04 if (BFIN533_STAMP && BFIN_ALIVE_LED_NUM = 1) - default 0x08 if (BFIN533_STAMP && BFIN_ALIVE_LED_NUM = 2) - default 0x10 if (BFIN533_STAMP && BFIN_ALIVE_LED_NUM = 3) - -config BFIN_IDLE_LED_PORT - hex - default 0xFFC00700 if (BFIN533_STAMP) - -# Peripheral Flag Direction Register -config BFIN_IDLE_LED_DPORT - hex - default 0xFFC00730 if (BFIN533_STAMP) - -config BFIN_IDLE_LED_PIN - hex - default 0x04 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 1) - default 0x08 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 2) - default 0x10 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 3) - endmenu @@ -799,6 +760,15 @@ config L1_MAX_PIECE Set the max memory pieces for the L1 SRAM allocation algorithm. Min value is 16. Max value is 1024. + +config MPU + bool "Enable the memory protection unit (EXPERIMENTAL)" + default n + help + Use the processor's MPU to protect applications from accessing + memory they do not own. This comes at a performance penalty + and is recommended only for debugging. + comment "Asynchonous Memory Configuration" menu "EBIU_AMGCTL Global Control" @@ -808,7 +778,6 @@ config C_AMCKEN config C_CDPRIO bool "DMA has priority over core for ext. accesses" - depends on !BF54x default n config C_B0PEN @@ -949,8 +918,10 @@ endchoice config PM_WAKEUP_SIC_IWR hex "Wakeup Events (SIC_IWR)" depends on PM_WAKEUP_GPIO_BY_SIC_IWR - default 0x80000000 if (BF537 || BF536 || BF534) - default 0x100000 if (BF533 || BF532 || BF531) + default 0x8 if (BF537 || BF536 || BF534) + default 0x80 if (BF533 || BF532 || BF531) + default 0x80 if (BF54x) + default 0x80 if (BF52x) config PM_WAKEUP_GPIO_NUMBER int "Wakeup GPIO number" diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index c47e000f8324..0edc402fef54 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -21,7 +21,10 @@ KBUILD_DEFCONFIG := BF537-STAMP_defconfig # setup the machine name and the machine dependent settings machine-$(CONFIG_BF522) := bf527 +machine-$(CONFIG_BF523) := bf527 +machine-$(CONFIG_BF524) := bf527 machine-$(CONFIG_BF525) := bf527 +machine-$(CONFIG_BF526) := bf527 machine-$(CONFIG_BF527) := bf527 machine-$(CONFIG_BF531) := bf533 machine-$(CONFIG_BF532) := bf533 @@ -39,7 +42,10 @@ MACHINE := $(machine-y) export MACHINE cpu-$(CONFIG_BF522) := bf522 +cpu-$(CONFIG_BF523) := bf523 +cpu-$(CONFIG_BF524) := bf524 cpu-$(CONFIG_BF525) := bf525 +cpu-$(CONFIG_BF526) := bf526 cpu-$(CONFIG_BF527) := bf527 cpu-$(CONFIG_BF531) := bf531 cpu-$(CONFIG_BF532) := bf532 @@ -76,6 +82,12 @@ core-y += arch/$(ARCH)/mach-$(MACHINE)/ core-y += arch/$(ARCH)/mach-$(MACHINE)/boards/ endif +ifeq ($(CONFIG_MPU),y) +core-y += arch/$(ARCH)/kernel/cplb-mpu/ +else +core-y += arch/$(ARCH)/kernel/cplb-nompu/ +endif + libs-y += arch/$(ARCH)/lib/ drivers-$(CONFIG_OPROFILE) += arch/$(ARCH)/oprofile/ diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index fa6eb4e00fae..d59ee1530bd4 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.12 +# Linux kernel version: 2.6.22.14 +# Thu Nov 29 17:32:47 2007 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -153,8 +154,8 @@ CONFIG_BFIN527_EZKIT=y CONFIG_BF527_SPORT0_PORTG=y CONFIG_BF527_SPORT0_TSCLK_PG10=y # CONFIG_BF527_SPORT0_TSCLK_PG14 is not set -# CONFIG_BF527_UART1_PORTF is not set -CONFIG_BF527_UART1_PORTG=y +CONFIG_BF527_UART1_PORTF=y +# CONFIG_BF527_UART1_PORTG is not set # CONFIG_BF527_NAND_D_PORTF is not set CONFIG_BF527_NAND_D_PORTH=y @@ -232,7 +233,7 @@ CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # @@ -626,8 +627,8 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y # CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y # # Wireless LAN @@ -1183,7 +1184,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1208,7 +1209,7 @@ CONFIG_ACCESS_CHECK=y # CONFIG_KEYS is not set CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=y +CONFIG_SECURITY_CAPABILITIES=m # # Cryptographic options @@ -1219,7 +1220,7 @@ CONFIG_SECURITY_CAPABILITIES=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set +CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 4fdb49362ba3..811711f59a25 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.12 +# Linux kernel version: 2.6.22.16 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -115,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # Processor and Board Settings # # CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set # CONFIG_BF525 is not set +# CONFIG_BF526 is not set # CONFIG_BF527 is not set # CONFIG_BF531 is not set # CONFIG_BF532 is not set @@ -194,7 +197,7 @@ CONFIG_CLKIN_HZ=27000000 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=750000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # @@ -267,6 +270,7 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_WB is not set CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set # # Asynchonous Memory Configuration @@ -321,7 +325,7 @@ CONFIG_PM=y CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y # CONFIG_PM_WAKEUP_BY_GPIO is not set # CONFIG_PM_WAKEUP_GPIO_API is not set -CONFIG_PM_WAKEUP_SIC_IWR=0x100000 +CONFIG_PM_WAKEUP_SIC_IWR=0x80 # # CPU Frequency scaling @@ -510,7 +514,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_INTELEXT is not set # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_MW320D=m CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set @@ -520,9 +523,6 @@ CONFIG_MTD_ROM=m # CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_BF5xx=m -CONFIG_BFIN_FLASH_SIZE=0x400000 -CONFIG_EBIU_FLASH_BASE=0x20000000 # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -610,8 +610,8 @@ CONFIG_SMC91X=y # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y # CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y # # Wireless LAN @@ -680,7 +680,6 @@ CONFIG_INPUT_EVDEV=m CONFIG_BFIN_SPORT=y # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_AD5304 is not set -# CONFIG_BF5xx_FBDMA is not set # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index b04e8e533e9a..9b7123cf27a3 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.12 +# Linux kernel version: 2.6.22.16 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -115,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # Processor and Board Settings # # CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set # CONFIG_BF525 is not set +# CONFIG_BF526 is not set # CONFIG_BF527 is not set # CONFIG_BF531 is not set # CONFIG_BF532 is not set @@ -140,7 +143,6 @@ CONFIG_BF_REV_0_3=y CONFIG_BF53x=y CONFIG_BFIN_SINGLE_CORE=y CONFIG_MEM_MT48LC64M4A2FB_7E=y -CONFIG_BFIN_SHARED_FLASH_ENET=y # CONFIG_BFIN533_EZKIT is not set CONFIG_BFIN533_STAMP=y # CONFIG_BFIN533_BLUETECHNIX_CM is not set @@ -195,7 +197,7 @@ CONFIG_CLKIN_HZ=11059200 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=750000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # @@ -215,18 +217,10 @@ CONFIG_MEM_ADD_WIDTH=11 CONFIG_ENET_FLASH_PIN=0 CONFIG_BOOT_LOAD=0x1000 -# -# LED Status Indicators -# -# CONFIG_BFIN_ALIVE_LED is not set -# CONFIG_BFIN_IDLE_LED is not set + CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set -CONFIG_BFIN_ALIVE_LED_PORT=0xFFC00700 -CONFIG_BFIN_ALIVE_LED_DPORT=0xFFC00730 -CONFIG_BFIN_IDLE_LED_PORT=0xFFC00700 -CONFIG_BFIN_IDLE_LED_DPORT=0xFFC00730 # # Blackfin Kernel Optimizations @@ -279,6 +273,7 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_WB is not set CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set # # Asynchonous Memory Configuration @@ -333,7 +328,7 @@ CONFIG_PM=y CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y # CONFIG_PM_WAKEUP_BY_GPIO is not set # CONFIG_PM_WAKEUP_GPIO_API is not set -CONFIG_PM_WAKEUP_SIC_IWR=0x100000 +CONFIG_PM_WAKEUP_SIC_IWR=0x80 # # CPU Frequency scaling @@ -522,7 +517,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_INTELEXT is not set # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_MW320D=m CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set @@ -532,17 +526,6 @@ CONFIG_MTD_ROM=m # CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_BF5xx=m -CONFIG_BFIN_FLASH_SIZE=0x400000 -CONFIG_EBIU_FLASH_BASE=0x20000000 - -# -# FLASH_EBIU_AMBCTL Control -# -CONFIG_BFIN_FLASH_BANK_0=0x7BB0 -CONFIG_BFIN_FLASH_BANK_1=0x7BB0 -CONFIG_BFIN_FLASH_BANK_2=0x7BB0 -CONFIG_BFIN_FLASH_BANK_3=0x7BB0 # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -630,8 +613,8 @@ CONFIG_SMC91X=y # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y # CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y # # Wireless LAN @@ -687,7 +670,6 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_UINPUT is not set -# CONFIG_BF53X_PFBUTTONS is not set CONFIG_TWI_KEYPAD=m CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39 @@ -711,8 +693,6 @@ CONFIG_BFIN_SPORT=y CONFIG_TWI_LCD=m CONFIG_TWI_LCD_SLAVE_ADDR=34 # CONFIG_AD5304 is not set -# CONFIG_BF5xx_TEA5764 is not set -# CONFIG_BF5xx_FBDMA is not set # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set @@ -778,7 +758,6 @@ CONFIG_I2C_ALGOBIT=m # # I2C Hardware Bus support # -# CONFIG_I2C_BLACKFIN_GPIO is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index f812b66318b9..b37ccc681e7a 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.12 +# Linux kernel version: 2.6.22.16 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -115,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # Processor and Board Settings # # CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set # CONFIG_BF525 is not set +# CONFIG_BF526 is not set # CONFIG_BF527 is not set # CONFIG_BF531 is not set # CONFIG_BF532 is not set @@ -170,6 +173,7 @@ CONFIG_IRQ_WATCH=13 CONFIG_BFIN537_STAMP=y # CONFIG_BFIN537_BLUETECHNIX_CM is not set # CONFIG_PNAV10 is not set +# CONFIG_CAMSIG_MINOTAUR is not set # CONFIG_GENERIC_BF537_BOARD is not set # @@ -201,7 +205,7 @@ CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # @@ -274,6 +278,7 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_WB is not set CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set # # Asynchonous Memory Configuration @@ -328,7 +333,7 @@ CONFIG_PM=y CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y # CONFIG_PM_WAKEUP_BY_GPIO is not set # CONFIG_PM_WAKEUP_GPIO_API is not set -CONFIG_PM_WAKEUP_SIC_IWR=0x80000000 +CONFIG_PM_WAKEUP_SIC_IWR=0x8 # # CPU Frequency scaling @@ -483,7 +488,7 @@ CONFIG_MTD=y # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y # # User Modules And Translation Layers @@ -500,8 +505,8 @@ CONFIG_MTD_BLOCK=y # # RAM/ROM/Flash chip drivers # -# CONFIG_MTD_CFI is not set -CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_CFI=m +# CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=m # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y @@ -515,9 +520,9 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set -# CONFIG_MTD_CFI_AMDSTD is not set +CONFIG_MTD_CFI_AMDSTD=m # CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_MW320D=m +CONFIG_MTD_CFI_UTIL=m CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set @@ -525,11 +530,11 @@ CONFIG_MTD_ROM=m # # Mapping drivers for chip access # -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_BF5xx=m -CONFIG_BFIN_FLASH_SIZE=0x400000 -CONFIG_EBIU_FLASH_BASE=0x20000000 +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=m +CONFIG_MTD_PHYSMAP_START=0x20000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -647,8 +652,8 @@ CONFIG_BFIN_RX_DESC_NUM=20 # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y # CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y # # Wireless LAN @@ -704,7 +709,6 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_UINPUT is not set -# CONFIG_BF53X_PFBUTTONS is not set CONFIG_TWI_KEYPAD=m CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72 @@ -728,8 +732,6 @@ CONFIG_BFIN_SPORT=y CONFIG_TWI_LCD=m CONFIG_TWI_LCD_SLAVE_ADDR=34 # CONFIG_AD5304 is not set -# CONFIG_BF5xx_TEA5764 is not set -# CONFIG_BF5xx_FBDMA is not set # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set @@ -802,7 +804,6 @@ CONFIG_I2C_CHARDEV=m # # I2C Hardware Bus support # -# CONFIG_I2C_BLACKFIN_GPIO is not set CONFIG_I2C_BLACKFIN_TWI=m CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 # CONFIG_I2C_GPIO is not set @@ -957,6 +958,7 @@ CONFIG_LQ035_SLAVE_ADDR=0x58 # CONFIG_FB_BFIN_LANDSCAPE is not set # CONFIG_FB_BFIN_BGR is not set # CONFIG_FB_BFIN_T350MCQB is not set +# CONFIG_FB_HITACHI_TX09 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_LOGO is not set @@ -1008,12 +1010,22 @@ CONFIG_SND_BFIN_AD73311_SE=4 # # System on Chip audio support # -# CONFIG_SND_SOC is not set +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_SOC=m +CONFIG_SND_BF5XX_SOC=m +CONFIG_SND_BF5XX_SOC_AC97=m +# CONFIG_SND_BF5XX_SOC_WM8750 is not set +# CONFIG_SND_BF5XX_SOC_WM8731 is not set +CONFIG_SND_BF5XX_SOC_BF5xx=m +CONFIG_SND_BF5XX_SPORT_NUM=0 +# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set +CONFIG_SND_SOC_AD1980=m # # Open Sound System # # CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m # # HID Devices diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index 48367cc9fe35..fd702161ef59 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.12 +# Linux kernel version: 2.6.22.16 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -115,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # Processor and Board Settings # # CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set # CONFIG_BF525 is not set +# CONFIG_BF526 is not set # CONFIG_BF527 is not set # CONFIG_BF531 is not set # CONFIG_BF532 is not set @@ -126,8 +129,8 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_BF542 is not set # CONFIG_BF544 is not set # CONFIG_BF547 is not set -# CONFIG_BF548 is not set -CONFIG_BF549=y +CONFIG_BF548=y +# CONFIG_BF549 is not set # CONFIG_BF561 is not set CONFIG_BF_REV_0_0=y # CONFIG_BF_REV_0_1 is not set @@ -265,9 +268,9 @@ CONFIG_PINT3_ASSIGN=0x02020303 # CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set -CONFIG_MAX_VCO_HZ=533000000 +CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # @@ -283,7 +286,8 @@ CONFIG_HZ=250 # Memory Setup # CONFIG_MEM_SIZE=64 -CONFIG_MEM_ADD_WIDTH=10 +# CONFIG_MEM_MT46V32M16_6T is not set +CONFIG_MEM_MT46V32M16_5B=y CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set @@ -340,6 +344,7 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_WB is not set CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set # # Asynchonous Memory Configuration @@ -349,6 +354,7 @@ CONFIG_L1_MAX_PIECE=16 # EBIU_AMGCTL Global Control # CONFIG_C_AMCKEN=y +# CONFIG_C_CDPRIO is not set # CONFIG_C_AMBEN is not set # CONFIG_C_AMBEN_B0 is not set # CONFIG_C_AMBEN_B0_B1 is not set @@ -362,9 +368,9 @@ CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x5554 CONFIG_BANK_2=0x7BB0 CONFIG_BANK_3=0x99B3 -CONFIG_EBUI_MBSCTLVAL=0x0 -CONFIG_EBUI_MODEVAL=0x1 -CONFIG_EBUI_FCTLVAL=0x6 +CONFIG_EBIU_MBSCTLVAL=0x0 +CONFIG_EBIU_MODEVAL=0x1 +CONFIG_EBIU_FCTLVAL=0x6 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) @@ -537,7 +543,6 @@ CONFIG_MTD_CFI_I2=y CONFIG_MTD_CFI_INTELEXT=y # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set -# CONFIG_MTD_MW320D is not set CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set @@ -549,9 +554,8 @@ CONFIG_MTD_RAM=y CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0x20000000 -CONFIG_MTD_PHYSMAP_LEN=0x400000 +CONFIG_MTD_PHYSMAP_LEN=0 CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_BF5xx is not set # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -690,8 +694,8 @@ CONFIG_MII=y CONFIG_SMSC911X=y # CONFIG_DM9000 is not set CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y # CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y # # Wireless LAN @@ -719,7 +723,7 @@ CONFIG_NETDEV_10000=y # # Input device support # -CONFIG_INPUT=m +CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set @@ -745,7 +749,8 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_GPIO is not set -CONFIG_KEYBOARD_BFIN=m +CONFIG_KEYBOARD_BFIN=y +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -768,7 +773,6 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_UINPUT is not set -# CONFIG_BF53X_PFBUTTONS is not set # CONFIG_TWI_KEYPAD is not set # @@ -786,13 +790,16 @@ CONFIG_INPUT_MISC=y # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_OTP=y +# CONFIG_BFIN_OTP_WRITE_ENABLE is not set # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_TWI_LCD is not set # CONFIG_AD5304 is not set -# CONFIG_BF5xx_TEA5764 is not set -# CONFIG_BF5xx_FBDMA is not set -# CONFIG_VT is not set +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -858,7 +865,6 @@ CONFIG_I2C_CHARDEV=y # # I2C Hardware Bus support # -# CONFIG_I2C_BLACKFIN_GPIO is not set CONFIG_I2C_BLACKFIN_TWI=y CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 # CONFIG_I2C_GPIO is not set @@ -976,12 +982,12 @@ CONFIG_DAB=y # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set -CONFIG_FB=m +CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set -CONFIG_FB_CFB_FILLRECT=m -CONFIG_FB_CFB_COPYAREA=m -CONFIG_FB_CFB_IMAGEBLIT=m +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set @@ -998,11 +1004,34 @@ CONFIG_FB_DEFERRED_IO=y # # CONFIG_FB_BFIN_7171 is not set # CONFIG_FB_BFIN_7393 is not set -CONFIG_FB_BF54X_LQ043=m +CONFIG_FB_BF54X_LQ043=y # CONFIG_FB_BFIN_T350MCQB is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set -# CONFIG_LOGO is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +CONFIG_FONT_6x11=y +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +# CONFIG_LOGO_BLACKFIN_VGA16 is not set +CONFIG_LOGO_BLACKFIN_CLUT224=y # # Sound @@ -1051,7 +1080,8 @@ CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y # CONFIG_SND_BF5XX_SOC_WM8750 is not set # CONFIG_SND_BF5XX_SOC_WM8731 is not set CONFIG_SND_BF5XX_SPORT_NUM=0 -# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set +CONFIG_SND_BF5XX_HAVE_COLD_RESET=y +CONFIG_SND_BF5XX_RESET_GPIO_NUM=19 CONFIG_SND_SOC_AD1980=y # @@ -1403,7 +1433,7 @@ CONFIG_NLS_UTF8=m # # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1428,7 +1458,7 @@ CONFIG_ACCESS_CHECK=y # CONFIG_KEYS is not set CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=y +CONFIG_SECURITY_CAPABILITIES=m # # Cryptographic options @@ -1439,7 +1469,7 @@ CONFIG_SECURITY_CAPABILITIES=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set +CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index e9f100b45eb1..8546994939fb 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.12 +# Linux kernel version: 2.6.22.16 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -115,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # Processor and Board Settings # # CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set # CONFIG_BF525 is not set +# CONFIG_BF526 is not set # CONFIG_BF527 is not set # CONFIG_BF531 is not set # CONFIG_BF532 is not set @@ -238,7 +241,7 @@ CONFIG_CLKIN_HZ=30000000 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # @@ -311,6 +314,7 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_WB is not set CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set # # Asynchonous Memory Configuration @@ -512,7 +516,7 @@ CONFIG_MTD=y # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y # # User Modules And Translation Layers @@ -529,8 +533,8 @@ CONFIG_MTD_BLOCK=y # # RAM/ROM/Flash chip drivers # -# CONFIG_MTD_CFI is not set -CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_CFI=m +# CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=m # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y @@ -544,9 +548,9 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set -# CONFIG_MTD_CFI_AMDSTD is not set +CONFIG_MTD_CFI_AMDSTD=m # CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_MW320D=m +CONFIG_MTD_CFI_UTIL=m CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set @@ -554,12 +558,11 @@ CONFIG_MTD_ROM=m # # Mapping drivers for chip access # -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_EZKIT561 is not set -CONFIG_MTD_BF5xx=m -CONFIG_BFIN_FLASH_SIZE=0x0400000 -CONFIG_EBIU_FLASH_BASE=0x20000000 +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=m +CONFIG_MTD_PHYSMAP_START=0x20000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -647,8 +650,8 @@ CONFIG_SMC91X=y # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y # CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y # # Wireless LAN @@ -717,7 +720,6 @@ CONFIG_INPUT_EVDEV=m # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_AD5304 is not set -# CONFIG_BF5xx_FBDMA is not set # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index 8a4cfb293b27..318b9b692a48 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -7,7 +7,7 @@ extra-y := init_task.o vmlinux.lds obj-y := \ entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \ sys_bfin.o time.o traps.o irqchip.o dma-mapping.o flat.o \ - fixed_code.o cplbinit.o cacheinit.o reboot.o bfin_gpio.o + fixed_code.o reboot.o bfin_gpio.o obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o obj-$(CONFIG_MODULES) += module.o diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index b54446055a43..fa9debe8d5f4 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -339,13 +339,13 @@ EXPORT_SYMBOL(set_dma_config); unsigned short set_bfin_dma_config(char direction, char flow_mode, - char intr_mode, char dma_mode, char width) + char intr_mode, char dma_mode, char width, char syncmode) { unsigned short config; config = ((direction << 1) | (width << 2) | (dma_mode << 4) | - (intr_mode << 6) | (flow_mode << 12) | RESTART); + (intr_mode << 6) | (flow_mode << 12) | (syncmode << 5)); return config; } EXPORT_SYMBOL(set_bfin_dma_config); diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index ce85d4bf34ca..6bbe0a2fccb8 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -7,7 +7,7 @@ * Description: GPIO Abstraction Layer * * Modified: - * Copyright 2007 Analog Devices Inc. + * Copyright 2008 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -83,6 +83,7 @@ #include <linux/delay.h> #include <linux/module.h> #include <linux/err.h> +#include <linux/proc_fs.h> #include <asm/blackfin.h> #include <asm/gpio.h> #include <asm/portmux.h> @@ -136,7 +137,6 @@ static unsigned short *port_fer[gpio_bank(MAX_BLACKFIN_GPIOS)] = { (unsigned short *) PORTG_FER, (unsigned short *) PORTH_FER, }; - #endif #ifdef BF527_FAMILY @@ -178,15 +178,13 @@ static struct gpio_port_t *gpio_array[gpio_bank(MAX_BLACKFIN_GPIOS)] = { #endif static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; -static unsigned short reserved_peri_map[gpio_bank(MAX_BLACKFIN_GPIOS + 16)]; +static unsigned short reserved_peri_map[gpio_bank(MAX_RESOURCES)]; -#define MAX_RESOURCES 256 #define RESOURCE_LABEL_SIZE 16 -struct str_ident { +static struct str_ident { char name[RESOURCE_LABEL_SIZE]; -} *str_ident; - +} str_ident[MAX_RESOURCES]; #ifdef CONFIG_PM static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; @@ -212,7 +210,7 @@ static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG0_INT #endif /* CONFIG_PM */ #if defined(BF548_FAMILY) -inline int check_gpio(unsigned short gpio) +inline int check_gpio(unsigned gpio) { if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 || gpio == GPIO_PH14 || gpio == GPIO_PH15 @@ -222,7 +220,7 @@ inline int check_gpio(unsigned short gpio) return 0; } #else -inline int check_gpio(unsigned short gpio) +inline int check_gpio(unsigned gpio) { if (gpio >= MAX_BLACKFIN_GPIOS) return -EINVAL; @@ -230,9 +228,13 @@ inline int check_gpio(unsigned short gpio) } #endif -static void set_label(unsigned short ident, const char *label) +void gpio_error(unsigned gpio) { + printk(KERN_ERR "bfin-gpio: GPIO %d wasn't requested!\n", gpio); +} +static void set_label(unsigned short ident, const char *label) +{ if (label && str_ident) { strncpy(str_ident[ident].name, label, RESOURCE_LABEL_SIZE); @@ -250,6 +252,11 @@ static char *get_label(unsigned short ident) static int cmp_label(unsigned short ident, const char *label) { + if (label == NULL) { + dump_stack(); + printk(KERN_ERR "Please provide none-null label\n"); + } + if (label && str_ident) return strncmp(str_ident[ident].name, label, strlen(label)); @@ -258,7 +265,7 @@ static int cmp_label(unsigned short ident, const char *label) } #if defined(BF527_FAMILY) || defined(BF537_FAMILY) -static void port_setup(unsigned short gpio, unsigned short usage) +static void port_setup(unsigned gpio, unsigned short usage) { if (!check_gpio(gpio)) { if (usage == GPIO_USAGE) @@ -269,7 +276,7 @@ static void port_setup(unsigned short gpio, unsigned short usage) } } #elif defined(BF548_FAMILY) -static void port_setup(unsigned short gpio, unsigned short usage) +static void port_setup(unsigned gpio, unsigned short usage) { if (usage == GPIO_USAGE) gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio); @@ -390,7 +397,7 @@ inline void portmux_setup(unsigned short portno, unsigned short function) #endif #ifndef BF548_FAMILY -static void default_gpio(unsigned short gpio) +static void default_gpio(unsigned gpio) { unsigned short bank, bitmask; unsigned long flags; @@ -410,7 +417,6 @@ static void default_gpio(unsigned short gpio) gpio_bankb[bank]->edge &= ~bitmask; AWA_DUMMY_READ(edge); local_irq_restore(flags); - } #else # define default_gpio(...) do { } while (0) @@ -418,12 +424,6 @@ static void default_gpio(unsigned short gpio) static int __init bfin_gpio_init(void) { - str_ident = kcalloc(MAX_RESOURCES, - sizeof(struct str_ident), GFP_KERNEL); - if (str_ident == NULL) - return -ENOMEM; - - memset(str_ident, 0, MAX_RESOURCES * sizeof(struct str_ident)); printk(KERN_INFO "Blackfin GPIO Controller\n"); @@ -454,10 +454,9 @@ arch_initcall(bfin_gpio_init); /* Set a specific bit */ #define SET_GPIO(name) \ -void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \ +void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ { \ unsigned long flags; \ - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \ local_irq_save(flags); \ if (arg) \ gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \ @@ -477,10 +476,9 @@ SET_GPIO(both) #if ANOMALY_05000311 || ANOMALY_05000323 #define SET_GPIO_SC(name) \ -void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \ +void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ { \ unsigned long flags; \ - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \ local_irq_save(flags); \ if (arg) \ gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ @@ -492,9 +490,8 @@ void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \ EXPORT_SYMBOL(set_gpio_ ## name); #else #define SET_GPIO_SC(name) \ -void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \ +void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ { \ - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \ if (arg) \ gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ else \ @@ -508,19 +505,17 @@ SET_GPIO_SC(maskb) SET_GPIO_SC(data) #if ANOMALY_05000311 || ANOMALY_05000323 -void set_gpio_toggle(unsigned short gpio) +void set_gpio_toggle(unsigned gpio) { unsigned long flags; - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); local_irq_save(flags); gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio); AWA_DUMMY_READ(toggle); local_irq_restore(flags); } #else -void set_gpio_toggle(unsigned short gpio) +void set_gpio_toggle(unsigned gpio) { - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio); } #endif @@ -531,7 +526,7 @@ EXPORT_SYMBOL(set_gpio_toggle); #if ANOMALY_05000311 || ANOMALY_05000323 #define SET_GPIO_P(name) \ -void set_gpiop_ ## name(unsigned short gpio, unsigned short arg) \ +void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \ { \ unsigned long flags; \ local_irq_save(flags); \ @@ -542,7 +537,7 @@ void set_gpiop_ ## name(unsigned short gpio, unsigned short arg) \ EXPORT_SYMBOL(set_gpiop_ ## name); #else #define SET_GPIO_P(name) \ -void set_gpiop_ ## name(unsigned short gpio, unsigned short arg) \ +void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \ { \ gpio_bankb[gpio_bank(gpio)]->name = arg; \ } \ @@ -558,11 +553,10 @@ SET_GPIO_P(both) SET_GPIO_P(maska) SET_GPIO_P(maskb) - /* Get a specific bit */ #if ANOMALY_05000311 || ANOMALY_05000323 #define GET_GPIO(name) \ -unsigned short get_gpio_ ## name(unsigned short gpio) \ +unsigned short get_gpio_ ## name(unsigned gpio) \ { \ unsigned long flags; \ unsigned short ret; \ @@ -575,7 +569,7 @@ unsigned short get_gpio_ ## name(unsigned short gpio) \ EXPORT_SYMBOL(get_gpio_ ## name); #else #define GET_GPIO(name) \ -unsigned short get_gpio_ ## name(unsigned short gpio) \ +unsigned short get_gpio_ ## name(unsigned gpio) \ { \ return (0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio))); \ } \ @@ -595,7 +589,7 @@ GET_GPIO(maskb) #if ANOMALY_05000311 || ANOMALY_05000323 #define GET_GPIO_P(name) \ -unsigned short get_gpiop_ ## name(unsigned short gpio) \ +unsigned short get_gpiop_ ## name(unsigned gpio) \ { \ unsigned long flags; \ unsigned short ret; \ @@ -608,7 +602,7 @@ unsigned short get_gpiop_ ## name(unsigned short gpio) \ EXPORT_SYMBOL(get_gpiop_ ## name); #else #define GET_GPIO_P(name) \ -unsigned short get_gpiop_ ## name(unsigned short gpio) \ +unsigned short get_gpiop_ ## name(unsigned gpio) \ { \ return (gpio_bankb[gpio_bank(gpio)]->name);\ } \ @@ -645,7 +639,7 @@ GET_GPIO_P(maskb) ************************************************************* * MODIFICATION HISTORY : **************************************************************/ -int gpio_pm_wakeup_request(unsigned short gpio, unsigned char type) +int gpio_pm_wakeup_request(unsigned gpio, unsigned char type) { unsigned long flags; @@ -653,7 +647,6 @@ int gpio_pm_wakeup_request(unsigned short gpio, unsigned char type) return -EINVAL; local_irq_save(flags); - wakeup_map[gpio_bank(gpio)] |= gpio_bit(gpio); wakeup_flags_map[gpio] = type; local_irq_restore(flags); @@ -662,7 +655,7 @@ int gpio_pm_wakeup_request(unsigned short gpio, unsigned char type) } EXPORT_SYMBOL(gpio_pm_wakeup_request); -void gpio_pm_wakeup_free(unsigned short gpio) +void gpio_pm_wakeup_free(unsigned gpio) { unsigned long flags; @@ -677,7 +670,7 @@ void gpio_pm_wakeup_free(unsigned short gpio) } EXPORT_SYMBOL(gpio_pm_wakeup_free); -static int bfin_gpio_wakeup_type(unsigned short gpio, unsigned char type) +static int bfin_gpio_wakeup_type(unsigned gpio, unsigned char type) { port_setup(gpio, GPIO_USAGE); set_gpio_dir(gpio, 0); @@ -784,6 +777,14 @@ void gpio_pm_restore(void) } #endif +#else /* BF548_FAMILY */ + +unsigned short get_gpio_dir(unsigned gpio) +{ + return (0x01 & (gpio_array[gpio_bank(gpio)]->port_dir_clear >> gpio_sub_n(gpio))); +} +EXPORT_SYMBOL(get_gpio_dir); + #endif /* BF548_FAMILY */ /*********************************************************** @@ -1028,7 +1029,7 @@ EXPORT_SYMBOL(peripheral_free_list); * MODIFICATION HISTORY : **************************************************************/ -int gpio_request(unsigned short gpio, const char *label) +int gpio_request(unsigned gpio, const char *label) { unsigned long flags; @@ -1075,7 +1076,7 @@ int gpio_request(unsigned short gpio, const char *label) } EXPORT_SYMBOL(gpio_request); -void gpio_free(unsigned short gpio) +void gpio_free(unsigned gpio) { unsigned long flags; @@ -1085,7 +1086,7 @@ void gpio_free(unsigned short gpio) local_irq_save(flags); if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { - printk(KERN_ERR "bfin-gpio: GPIO %d wasn't reserved!\n", gpio); + gpio_error(gpio); dump_stack(); local_irq_restore(flags); return; @@ -1101,44 +1102,55 @@ void gpio_free(unsigned short gpio) } EXPORT_SYMBOL(gpio_free); + #ifdef BF548_FAMILY -void gpio_direction_input(unsigned short gpio) +int gpio_direction_input(unsigned gpio) { unsigned long flags; - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); + if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + gpio_error(gpio); + return -EINVAL; + } local_irq_save(flags); gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); local_irq_restore(flags); + + return 0; } EXPORT_SYMBOL(gpio_direction_input); -void gpio_direction_output(unsigned short gpio) +int gpio_direction_output(unsigned gpio, int value) { unsigned long flags; - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); + if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + gpio_error(gpio); + return -EINVAL; + } local_irq_save(flags); gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio); + gpio_set_value(gpio, value); gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio); local_irq_restore(flags); + + return 0; } EXPORT_SYMBOL(gpio_direction_output); -void gpio_set_value(unsigned short gpio, unsigned short arg) +void gpio_set_value(unsigned gpio, int arg) { if (arg) gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio); else gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio); - } EXPORT_SYMBOL(gpio_set_value); -unsigned short gpio_get_value(unsigned short gpio) +int gpio_get_value(unsigned gpio) { return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio))); } @@ -1146,31 +1158,47 @@ EXPORT_SYMBOL(gpio_get_value); #else -void gpio_direction_input(unsigned short gpio) +int gpio_direction_input(unsigned gpio) { unsigned long flags; - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); + if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + gpio_error(gpio); + return -EINVAL; + } local_irq_save(flags); gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); gpio_bankb[gpio_bank(gpio)]->inen |= gpio_bit(gpio); AWA_DUMMY_READ(inen); local_irq_restore(flags); + + return 0; } EXPORT_SYMBOL(gpio_direction_input); -void gpio_direction_output(unsigned short gpio) +int gpio_direction_output(unsigned gpio, int value) { unsigned long flags; - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); + if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + gpio_error(gpio); + return -EINVAL; + } local_irq_save(flags); gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); + + if (value) + gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio); + else + gpio_bankb[gpio_bank(gpio)]->data_clear = gpio_bit(gpio); + gpio_bankb[gpio_bank(gpio)]->dir |= gpio_bit(gpio); AWA_DUMMY_READ(dir); local_irq_restore(flags); + + return 0; } EXPORT_SYMBOL(gpio_direction_output); @@ -1190,7 +1218,40 @@ void bfin_gpio_reset_spi0_ssel1(void) port_setup(gpio, GPIO_USAGE); gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio); + AWA_DUMMY_READ(data_set); udelay(1); } #endif /*BF548_FAMILY */ + +#if defined(CONFIG_PROC_FS) +static int gpio_proc_read(char *buf, char **start, off_t offset, + int len, int *unused_i, void *unused_v) +{ + int c, outlen = 0; + + for (c = 0; c < MAX_RESOURCES; c++) { + if (!check_gpio(c) && (reserved_gpio_map[gpio_bank(c)] & gpio_bit(c))) + len = sprintf(buf, "GPIO_%d: %s \t\tGPIO %s\n", c, + get_label(c), get_gpio_dir(c) ? "OUTPUT" : "INPUT"); + else if (reserved_peri_map[gpio_bank(c)] & gpio_bit(c)) + len = sprintf(buf, "GPIO_%d: %s \t\tPeripheral\n", c, get_label(c)); + else + continue; + buf += len; + outlen += len; + } + return outlen; +} + +static __init int gpio_register_proc(void) +{ + struct proc_dir_entry *proc_gpio; + + proc_gpio = create_proc_entry("gpio", S_IRUGO, NULL); + if (proc_gpio) + proc_gpio->read_proc = gpio_proc_read; + return proc_gpio != NULL; +} +__initcall(gpio_register_proc); +#endif diff --git a/arch/blackfin/kernel/cplb-mpu/Makefile b/arch/blackfin/kernel/cplb-mpu/Makefile new file mode 100644 index 000000000000..286b69357f97 --- /dev/null +++ b/arch/blackfin/kernel/cplb-mpu/Makefile @@ -0,0 +1,8 @@ +# +# arch/blackfin/kernel/cplb-nompu/Makefile +# + +obj-y := cplbinit.o cacheinit.o cplbmgr.o + +obj-$(CONFIG_CPLB_INFO) += cplbinfo.o + diff --git a/arch/blackfin/kernel/cplb-mpu/cacheinit.c b/arch/blackfin/kernel/cplb-mpu/cacheinit.c new file mode 100644 index 000000000000..9eecfa403187 --- /dev/null +++ b/arch/blackfin/kernel/cplb-mpu/cacheinit.c @@ -0,0 +1,62 @@ +/* + * Copyright 2004-2007 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/cpu.h> + +#include <asm/cacheflush.h> +#include <asm/blackfin.h> +#include <asm/cplb.h> +#include <asm/cplbinit.h> + +#if defined(CONFIG_BFIN_ICACHE) +void bfin_icache_init(void) +{ + unsigned long ctrl; + int i; + + SSYNC(); + for (i = 0; i < MAX_CPLBS; i++) { + bfin_write32(ICPLB_ADDR0 + i * 4, icplb_tbl[i].addr); + bfin_write32(ICPLB_DATA0 + i * 4, icplb_tbl[i].data); + } + ctrl = bfin_read_IMEM_CONTROL(); + ctrl |= IMC | ENICPLB; + bfin_write_IMEM_CONTROL(ctrl); + SSYNC(); +} +#endif + +#if defined(CONFIG_BFIN_DCACHE) +void bfin_dcache_init(void) +{ + unsigned long ctrl; + int i; + + SSYNC(); + for (i = 0; i < MAX_CPLBS; i++) { + bfin_write32(DCPLB_ADDR0 + i * 4, dcplb_tbl[i].addr); + bfin_write32(DCPLB_DATA0 + i * 4, dcplb_tbl[i].data); + } + + ctrl = bfin_read_DMEM_CONTROL(); + ctrl |= DMEM_CNTR; + bfin_write_DMEM_CONTROL(ctrl); + SSYNC(); +} +#endif diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinfo.c b/arch/blackfin/kernel/cplb-mpu/cplbinfo.c new file mode 100644 index 000000000000..bd072299f7f2 --- /dev/null +++ b/arch/blackfin/kernel/cplb-mpu/cplbinfo.c @@ -0,0 +1,144 @@ +/* + * File: arch/blackfin/mach-common/cplbinfo.c + * Based on: + * Author: Sonic Zhang <sonic.zhang@analog.com> + * + * Created: Jan. 2005 + * Description: Display CPLB status + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/proc_fs.h> +#include <linux/uaccess.h> + +#include <asm/current.h> +#include <asm/system.h> +#include <asm/cplb.h> +#include <asm/cplbinit.h> +#include <asm/blackfin.h> + +#define CPLB_I 1 +#define CPLB_D 2 + +#define SYNC_SYS SSYNC() +#define SYNC_CORE CSYNC() + +#define CPLB_BIT_PAGESIZE 0x30000 + +static char page_size_string_table[][4] = { "1K", "4K", "1M", "4M" }; + +static char *cplb_print_entry(char *buf, struct cplb_entry *tbl, int switched) +{ + int i; + buf += sprintf(buf, "Index\tAddress\t\tData\tSize\tU/RD\tU/WR\tS/WR\tSwitch\n"); + for (i = 0; i < MAX_CPLBS; i++) { + unsigned long data = tbl[i].data; + unsigned long addr = tbl[i].addr; + if (!(data & CPLB_VALID)) + continue; + + buf += + sprintf(buf, + "%d\t0x%08lx\t%06lx\t%s\t%c\t%c\t%c\t%c\n", + i, addr, data, + page_size_string_table[(data & 0x30000) >> 16], + (data & CPLB_USER_RD) ? 'Y' : 'N', + (data & CPLB_USER_WR) ? 'Y' : 'N', + (data & CPLB_SUPV_WR) ? 'Y' : 'N', + i < switched ? 'N' : 'Y'); + } + buf += sprintf(buf, "\n"); + + return buf; +} + +int cplbinfo_proc_output(char *buf) +{ + char *p; + + p = buf; + + p += sprintf(p, "------------------ CPLB Information ------------------\n\n"); + + if (bfin_read_IMEM_CONTROL() & ENICPLB) { + p += sprintf(p, "Instruction CPLB entry:\n"); + p = cplb_print_entry(p, icplb_tbl, first_switched_icplb); + } else + p += sprintf(p, "Instruction CPLB is disabled.\n\n"); + + if (1 || bfin_read_DMEM_CONTROL() & ENDCPLB) { + p += sprintf(p, "Data CPLB entry:\n"); + p = cplb_print_entry(p, dcplb_tbl, first_switched_dcplb); + } else + p += sprintf(p, "Data CPLB is disabled.\n"); + + p += sprintf(p, "ICPLB miss: %d\nICPLB supervisor miss: %d\n", + nr_icplb_miss, nr_icplb_supv_miss); + p += sprintf(p, "DCPLB miss: %d\nDCPLB protection fault:%d\n", + nr_dcplb_miss, nr_dcplb_prot); + p += sprintf(p, "CPLB flushes: %d\n", + nr_cplb_flush); + + return p - buf; +} + +static int cplbinfo_read_proc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + int len; + + len = cplbinfo_proc_output(page); + if (len <= off + count) + *eof = 1; + *start = page + off; + len -= off; + if (len > count) + len = count; + if (len < 0) + len = 0; + return len; +} + +static int __init cplbinfo_init(void) +{ + struct proc_dir_entry *entry; + + entry = create_proc_entry("cplbinfo", 0, NULL); + if (!entry) + return -ENOMEM; + + entry->read_proc = cplbinfo_read_proc; + entry->data = NULL; + + return 0; +} + +static void __exit cplbinfo_exit(void) +{ + remove_proc_entry("cplbinfo", NULL); +} + +module_init(cplbinfo_init); +module_exit(cplbinfo_exit); diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c new file mode 100644 index 000000000000..e2e2b5079f5b --- /dev/null +++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c @@ -0,0 +1,91 @@ +/* + * Blackfin CPLB initialization + * + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/module.h> + +#include <asm/blackfin.h> +#include <asm/cplb.h> +#include <asm/cplbinit.h> + +struct cplb_entry icplb_tbl[MAX_CPLBS]; +struct cplb_entry dcplb_tbl[MAX_CPLBS]; + +int first_switched_icplb, first_switched_dcplb; +int first_mask_dcplb; + +void __init generate_cpl_tables(void) +{ + int i_d, i_i; + unsigned long addr; + unsigned long d_data, i_data; + unsigned long d_cache = 0, i_cache = 0; + +#ifdef CONFIG_BFIN_ICACHE + i_cache = CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; +#endif + +#ifdef CONFIG_BFIN_DCACHE + d_cache = CPLB_L1_CHBL; +#ifdef CONFIG_BLKFIN_WT + d_cache |= CPLB_L1_AOW | CPLB_WT; +#endif +#endif + i_d = i_i = 0; + + /* Set up the zero page. */ + dcplb_tbl[i_d].addr = 0; + dcplb_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB; + +#if 0 + icplb_tbl[i_i].addr = 0; + icplb_tbl[i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_4KB; +#endif + + /* Cover kernel memory with 4M pages. */ + addr = 0; + d_data = d_cache | CPLB_SUPV_WR | CPLB_VALID | PAGE_SIZE_4MB | CPLB_DIRTY; + i_data = i_cache | CPLB_VALID | CPLB_PORTPRIO | PAGE_SIZE_4MB; + + for (; addr < memory_start; addr += 4 * 1024 * 1024) { + dcplb_tbl[i_d].addr = addr; + dcplb_tbl[i_d++].data = d_data; + icplb_tbl[i_i].addr = addr; + icplb_tbl[i_i++].data = i_data | (addr == 0 ? CPLB_USER_RD : 0); + } + + /* Cover L1 memory. One 4M area for code and data each is enough. */ +#if L1_DATA_A_LENGTH > 0 || L1_DATA_B_LENGTH > 0 + dcplb_tbl[i_d].addr = L1_DATA_A_START; + dcplb_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB; +#endif + icplb_tbl[i_i].addr = L1_CODE_START; + icplb_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB; + + first_mask_dcplb = i_d; + first_switched_dcplb = i_d + (1 << page_mask_order); + first_switched_icplb = i_i; + + while (i_d < MAX_CPLBS) + dcplb_tbl[i_d++].data = 0; + while (i_i < MAX_CPLBS) + icplb_tbl[i_i++].data = 0; +} diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c new file mode 100644 index 000000000000..c426a22f9907 --- /dev/null +++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c @@ -0,0 +1,338 @@ +/* + * Blackfin CPLB exception handling. + * Copyright 2004-2007 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/module.h> +#include <linux/mm.h> + +#include <asm/blackfin.h> +#include <asm/cplbinit.h> +#include <asm/mmu_context.h> + +#ifdef CONFIG_BFIN_ICACHE + +#define FAULT_RW (1 << 16) +#define FAULT_USERSUPV (1 << 17) + +int page_mask_nelts; +int page_mask_order; +unsigned long *current_rwx_mask; + +int nr_dcplb_miss, nr_icplb_miss, nr_icplb_supv_miss, nr_dcplb_prot; +int nr_cplb_flush; + +static inline void disable_dcplb(void) +{ + unsigned long ctrl; + SSYNC(); + ctrl = bfin_read_DMEM_CONTROL(); + ctrl &= ~ENDCPLB; + bfin_write_DMEM_CONTROL(ctrl); + SSYNC(); +} + +static inline void enable_dcplb(void) +{ + unsigned long ctrl; + SSYNC(); + ctrl = bfin_read_DMEM_CONTROL(); + ctrl |= ENDCPLB; + bfin_write_DMEM_CONTROL(ctrl); + SSYNC(); +} + +static inline void disable_icplb(void) +{ + unsigned long ctrl; + SSYNC(); + ctrl = bfin_read_IMEM_CONTROL(); + ctrl &= ~ENICPLB; + bfin_write_IMEM_CONTROL(ctrl); + SSYNC(); +} + +static inline void enable_icplb(void) +{ + unsigned long ctrl; + SSYNC(); + ctrl = bfin_read_IMEM_CONTROL(); + ctrl |= ENICPLB; + bfin_write_IMEM_CONTROL(ctrl); + SSYNC(); +} + +/* + * Given the contents of the status register, return the index of the + * CPLB that caused the fault. + */ +static inline int faulting_cplb_index(int status) +{ + int signbits = __builtin_bfin_norm_fr1x32(status & 0xFFFF); + return 30 - signbits; +} + +/* + * Given the contents of the status register and the DCPLB_DATA contents, + * return true if a write access should be permitted. + */ +static inline int write_permitted(int status, unsigned long data) +{ + if (status & FAULT_USERSUPV) + return !!(data & CPLB_SUPV_WR); + else + return !!(data & CPLB_USER_WR); +} + +/* Counters to implement round-robin replacement. */ +static int icplb_rr_index, dcplb_rr_index; + +/* + * Find an ICPLB entry to be evicted and return its index. + */ +static int evict_one_icplb(void) +{ + int i; + for (i = first_switched_icplb; i < MAX_CPLBS; i++) + if ((icplb_tbl[i].data & CPLB_VALID) == 0) + return i; + i = first_switched_icplb + icplb_rr_index; + if (i >= MAX_CPLBS) { + i -= MAX_CPLBS - first_switched_icplb; + icplb_rr_index -= MAX_CPLBS - first_switched_icplb; + } + icplb_rr_index++; + return i; +} + +static int evict_one_dcplb(void) +{ + int i; + for (i = first_switched_dcplb; i < MAX_CPLBS; i++) + if ((dcplb_tbl[i].data & CPLB_VALID) == 0) + return i; + i = first_switched_dcplb + dcplb_rr_index; + if (i >= MAX_CPLBS) { + i -= MAX_CPLBS - first_switched_dcplb; + dcplb_rr_index -= MAX_CPLBS - first_switched_dcplb; + } + dcplb_rr_index++; + return i; +} + +static noinline int dcplb_miss(void) +{ + unsigned long addr = bfin_read_DCPLB_FAULT_ADDR(); + int status = bfin_read_DCPLB_STATUS(); + unsigned long *mask; + int idx; + unsigned long d_data; + + nr_dcplb_miss++; + if (addr >= _ramend) + return CPLB_PROT_VIOL; + + d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB; +#ifdef CONFIG_BFIN_DCACHE + d_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; +#ifdef CONFIG_BLKFIN_WT + d_data |= CPLB_L1_AOW | CPLB_WT; +#endif +#endif + mask = current_rwx_mask; + if (mask) { + int page = addr >> PAGE_SHIFT; + int offs = page >> 5; + int bit = 1 << (page & 31); + + if (mask[offs] & bit) + d_data |= CPLB_USER_RD; + + mask += page_mask_nelts; + if (mask[offs] & bit) + d_data |= CPLB_USER_WR; + } + + idx = evict_one_dcplb(); + + addr &= PAGE_MASK; + dcplb_tbl[idx].addr = addr; + dcplb_tbl[idx].data = d_data; + + disable_dcplb(); + bfin_write32(DCPLB_DATA0 + idx * 4, d_data); + bfin_write32(DCPLB_ADDR0 + idx * 4, addr); + enable_dcplb(); + + return 0; +} + +static noinline int icplb_miss(void) +{ + unsigned long addr = bfin_read_ICPLB_FAULT_ADDR(); + int status = bfin_read_ICPLB_STATUS(); + int idx; + unsigned long i_data; + + nr_icplb_miss++; + if (status & FAULT_USERSUPV) + nr_icplb_supv_miss++; + + if (addr >= _ramend) + return CPLB_PROT_VIOL; + + /* + * First, try to find a CPLB that matches this address. If we + * find one, then the fact that we're in the miss handler means + * that the instruction crosses a page boundary. + */ + for (idx = first_switched_icplb; idx < MAX_CPLBS; idx++) { + if (icplb_tbl[idx].data & CPLB_VALID) { + unsigned long this_addr = icplb_tbl[idx].addr; + if (this_addr <= addr && this_addr + PAGE_SIZE > addr) { + addr += PAGE_SIZE; + break; + } + } + } + + i_data = CPLB_VALID | CPLB_PORTPRIO | PAGE_SIZE_4KB; +#ifdef CONFIG_BFIN_ICACHE + i_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; +#endif + + /* + * Two cases to distinguish - a supervisor access must necessarily + * be for a module page; we grant it unconditionally (could do better + * here in the future). Otherwise, check the x bitmap of the current + * process. + */ + if (!(status & FAULT_USERSUPV)) { + unsigned long *mask = current_rwx_mask; + + if (mask) { + int page = addr >> PAGE_SHIFT; + int offs = page >> 5; + int bit = 1 << (page & 31); + + mask += 2 * page_mask_nelts; + if (mask[offs] & bit) + i_data |= CPLB_USER_RD; + } + } + + idx = evict_one_icplb(); + addr &= PAGE_MASK; + icplb_tbl[idx].addr = addr; + icplb_tbl[idx].data = i_data; + + disable_icplb(); + bfin_write32(ICPLB_DATA0 + idx * 4, i_data); + bfin_write32(ICPLB_ADDR0 + idx * 4, addr); + enable_icplb(); + + return 0; +} + +static noinline int dcplb_protection_fault(void) +{ + unsigned long addr = bfin_read_DCPLB_FAULT_ADDR(); + int status = bfin_read_DCPLB_STATUS(); + + nr_dcplb_prot++; + + if (status & FAULT_RW) { + int idx = faulting_cplb_index(status); + unsigned long data = dcplb_tbl[idx].data; + if (!(data & CPLB_WT) && !(data & CPLB_DIRTY) && + write_permitted(status, data)) { + data |= CPLB_DIRTY; + dcplb_tbl[idx].data = data; + bfin_write32(DCPLB_DATA0 + idx * 4, data); + return 0; + } + } + return CPLB_PROT_VIOL; +} + +int cplb_hdr(int seqstat, struct pt_regs *regs) +{ + int cause = seqstat & 0x3f; + switch (cause) { + case 0x23: + return dcplb_protection_fault(); + case 0x2C: + return icplb_miss(); + case 0x26: + return dcplb_miss(); + default: + return 1; + panic_cplb_error(seqstat, regs); + } +} + +void flush_switched_cplbs(void) +{ + int i; + + nr_cplb_flush++; + + disable_icplb(); + for (i = first_switched_icplb; i < MAX_CPLBS; i++) { + icplb_tbl[i].data = 0; + bfin_write32(ICPLB_DATA0 + i * 4, 0); + } + enable_icplb(); + + disable_dcplb(); + for (i = first_mask_dcplb; i < MAX_CPLBS; i++) { + dcplb_tbl[i].data = 0; + bfin_write32(DCPLB_DATA0 + i * 4, 0); + } + enable_dcplb(); +} + +void set_mask_dcplbs(unsigned long *masks) +{ + int i; + unsigned long addr = (unsigned long)masks; + unsigned long d_data; + current_rwx_mask = masks; + + if (!masks) + return; + + d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB; +#ifdef CONFIG_BFIN_DCACHE + d_data |= CPLB_L1_CHBL; +#ifdef CONFIG_BLKFIN_WT + d_data |= CPLB_L1_AOW | CPLB_WT; +#endif +#endif + + disable_dcplb(); + for (i = first_mask_dcplb; i < first_switched_dcplb; i++) { + dcplb_tbl[i].addr = addr; + dcplb_tbl[i].data = d_data; + bfin_write32(DCPLB_DATA0 + i * 4, d_data); + bfin_write32(DCPLB_ADDR0 + i * 4, addr); + addr += PAGE_SIZE; + } + enable_dcplb(); +} + +#endif diff --git a/arch/blackfin/kernel/cplb-nompu/Makefile b/arch/blackfin/kernel/cplb-nompu/Makefile new file mode 100644 index 000000000000..d36ea9b5382e --- /dev/null +++ b/arch/blackfin/kernel/cplb-nompu/Makefile @@ -0,0 +1,8 @@ +# +# arch/blackfin/kernel/cplb-nompu/Makefile +# + +obj-y := cplbinit.o cacheinit.o cplbhdlr.o cplbmgr.o + +obj-$(CONFIG_CPLB_INFO) += cplbinfo.o + diff --git a/arch/blackfin/kernel/cacheinit.c b/arch/blackfin/kernel/cplb-nompu/cacheinit.c index 62cbba7364b0..8a18399f6072 100644 --- a/arch/blackfin/kernel/cacheinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cacheinit.c @@ -42,6 +42,7 @@ void bfin_icache_init(void) ctrl = bfin_read_IMEM_CONTROL(); ctrl |= IMC | ENICPLB; bfin_write_IMEM_CONTROL(ctrl); + SSYNC(); } #endif @@ -63,5 +64,6 @@ void bfin_dcache_init(void) ctrl = bfin_read_DMEM_CONTROL(); ctrl |= DMEM_CNTR; bfin_write_DMEM_CONTROL(ctrl); + SSYNC(); } #endif diff --git a/arch/blackfin/mach-common/cplbhdlr.S b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S index 2788532de72b..2788532de72b 100644 --- a/arch/blackfin/mach-common/cplbhdlr.S +++ b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S diff --git a/arch/blackfin/mach-common/cplbinfo.c b/arch/blackfin/kernel/cplb-nompu/cplbinfo.c index a4f0b428a34d..a4f0b428a34d 100644 --- a/arch/blackfin/mach-common/cplbinfo.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinfo.c diff --git a/arch/blackfin/kernel/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index 6320bc45fbba..6320bc45fbba 100644 --- a/arch/blackfin/kernel/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c diff --git a/arch/blackfin/mach-common/cplbmgr.S b/arch/blackfin/kernel/cplb-nompu/cplbmgr.S index 6f909cbfac7b..f5cf3accef37 100644 --- a/arch/blackfin/mach-common/cplbmgr.S +++ b/arch/blackfin/kernel/cplb-nompu/cplbmgr.S @@ -75,6 +75,15 @@ ENTRY(_cplb_mgr) * from the configuration table. */ + /* A multi-word instruction can cross a page boundary. This means the + * first part of the instruction can be in a valid page, but the + * second part is not, and hence generates the instruction miss. + * However, the fault address is for the start of the instruction, + * not the part that's in the bad page. Therefore, we have to check + * whether the fault address applies to a page that is already present + * in the table. + */ + P4.L = LO(ICPLB_FAULT_ADDR); P4.H = HI(ICPLB_FAULT_ADDR); @@ -87,7 +96,7 @@ ENTRY(_cplb_mgr) R4 = [P4]; /* Get faulting address*/ R6 = 64; /* Advance past the fault address, which*/ R6 = R6 + R4; /* we'll use if we find a match*/ - R3 = ((16 << 8) | 2); /* Extract mask, bits 16 and 17.*/ + R3 = ((16 << 8) | 2); /* Extract mask, two bits at posn 16 */ R5 = 0; .Lisearch: @@ -125,7 +134,9 @@ ENTRY(_cplb_mgr) P4.L = LO(IMEM_CONTROL); P4.H = HI(IMEM_CONTROL); - /* disable cplbs */ + /* Turn off CPLBs while we work, necessary according to HRM before + * modifying CPLB descriptors + */ R5 = [P4]; /* Control Register*/ BITCLR(R5,ENICPLB_P); CLI R1; @@ -179,7 +190,14 @@ ENTRY(_cplb_mgr) [P0 - 4] = R0; R0 = [P0 - 0x100]; [P0-0x104] = R0; -.Lie_move:P0+=4; +.Lie_move: + P0+=4; + + /* Clear ICPLB_DATA15, in case we don't find a replacement + * otherwise, we would have a duplicate entry, and will crash + */ + R0 = 0; + [P0 - 4] = R0; /* We've made space in the ICPLB table, so that ICPLB15 * is now free to be overwritten. Next, we have to determine @@ -504,14 +522,23 @@ ENTRY(_cplb_mgr) R0 = [P0++]; /* move data */ [P0 - 8] = R0; R0 = [P0-0x104] /* move address */ -.Lde_move: [P0-0x108] = R0; +.Lde_move: + [P0-0x108] = R0; + +.Lde_moved: + NOP; + + /* Clear DCPLB_DATA15, in case we don't find a replacement + * otherwise, we would have a duplicate entry, and will crash + */ + R0 = 0; + [P0 - 0x4] = R0; /* We've now made space in DCPLB15 for the new CPLB to be * installed. The next stage is to locate a CPLB in the * config table that covers the faulting address. */ -.Lde_moved:NOP; R0 = I0; /* Our faulting address */ P2.L = _dpdt_table; diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c index 724f4a5a1d46..60f67f90fe35 100644 --- a/arch/blackfin/kernel/early_printk.c +++ b/arch/blackfin/kernel/early_printk.c @@ -187,7 +187,7 @@ asmlinkage void __init init_early_exception_vectors(void) bfin_write_EVT15(early_trap); CSYNC(); - /* Set all the return from interupt, exception, NMI to a known place + /* Set all the return from interrupt, exception, NMI to a known place * so if we do a RETI, RETX or RETN by mistake - we go somewhere known * Note - don't change RETS - we are in a subroutine, or * RETE - since it might screw up if emulator is attached @@ -205,7 +205,7 @@ asmlinkage void __init early_trap_c(struct pt_regs *fp, void *retaddr) if (likely(early_console == NULL)) setup_early_printk(DEFAULT_EARLY_PORT); - dump_bfin_mem((void *)fp->retx); + dump_bfin_mem(fp); show_regs(fp); dump_bfin_trace_buffer(); diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 5bf15125f0d6..023dc80af187 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -39,9 +39,6 @@ #include <asm/blackfin.h> #include <asm/fixed_code.h> -#define LED_ON 0 -#define LED_OFF 1 - asmlinkage void ret_from_fork(void); /* Points to the SDRAM backup memory for the stack that is currently in @@ -70,32 +67,6 @@ void (*pm_power_off)(void) = NULL; EXPORT_SYMBOL(pm_power_off); /* - * We are using a different LED from the one used to indicate timer interrupt. - */ -#if defined(CONFIG_BFIN_IDLE_LED) -static inline void leds_switch(int flag) -{ - unsigned short tmp = 0; - - tmp = bfin_read_CONFIG_BFIN_IDLE_LED_PORT(); - SSYNC(); - - if (flag == LED_ON) - tmp &= ~CONFIG_BFIN_IDLE_LED_PIN; /* light on */ - else - tmp |= CONFIG_BFIN_IDLE_LED_PIN; /* light off */ - - bfin_write_CONFIG_BFIN_IDLE_LED_PORT(tmp); - SSYNC(); - -} -#else -static inline void leds_switch(int flag) -{ -} -#endif - -/* * The idle loop on BFIN */ #ifdef CONFIG_IDLE_L1 @@ -106,12 +77,10 @@ void cpu_idle(void)__attribute__((l1_text)); void default_idle(void) { while (!need_resched()) { - leds_switch(LED_OFF); local_irq_disable(); if (likely(!need_resched())) idle_with_irq_disabled(); local_irq_enable(); - leds_switch(LED_ON); } } @@ -327,6 +296,7 @@ void finish_atomic_sections (struct pt_regs *regs) } #if defined(CONFIG_ACCESS_CHECK) +/* Return 1 if access to memory range is OK, 0 otherwise */ int _access_ok(unsigned long addr, unsigned long size) { if (size == 0) diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c index ae28aac6fec1..483f93dfc1b5 100644 --- a/arch/blackfin/kernel/reboot.c +++ b/arch/blackfin/kernel/reboot.c @@ -19,6 +19,11 @@ #define SYSCR_VAL 0x10 #endif +/* + * Delay min 5 SCLK cycles using worst case CCLK/SCLK ratio (15) + */ +#define SWRST_DELAY (5 * 15) + /* A system soft reset makes external memory unusable * so force this function into L1. */ @@ -34,7 +39,13 @@ void bfin_reset(void) while (1) { /* initiate system soft reset with magic 0x7 */ bfin_write_SWRST(0x7); - asm("ssync;"); + + /* Wait for System reset to actually reset, needs to be 5 SCLKs, */ + /* Assume CCLK / SCLK ratio is worst case (15), and use 5*15 */ + + asm("LSETUP(.Lfoo,.Lfoo) LC0 = %0\n .Lfoo: NOP;\n" + : : "a" (SWRST_DELAY) : "LC0", "LT0", "LB0"); + /* clear system soft reset */ bfin_write_SWRST(0); asm("ssync;"); diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index d2822010b7ce..462cae893757 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -238,7 +238,13 @@ void __init setup_arch(char **cmdline_p) memory_end = _ramend - DMA_UNCACHED_REGION; _ramstart = (unsigned long)__bss_stop; + _rambase = (unsigned long)_stext; +#ifdef CONFIG_MPU + /* Round up to multiple of 4MB. */ + memory_start = (_ramstart + 0x3fffff) & ~0x3fffff; +#else memory_start = PAGE_ALIGN(_ramstart); +#endif #if defined(CONFIG_MTD_UCLINUX) /* generic memory mapped MTD driver */ @@ -307,6 +313,11 @@ void __init setup_arch(char **cmdline_p) printk(KERN_NOTICE "Warning: limiting memory to %liMB due to hardware anomaly 05000263\n", memory_end >> 20); #endif /* ANOMALY_05000263 */ +#ifdef CONFIG_MPU + page_mask_nelts = ((_ramend >> PAGE_SHIFT) + 31) / 32; + page_mask_order = get_order(3 * page_mask_nelts * sizeof(long)); +#endif + #if !defined(CONFIG_MTD_UCLINUX) memory_end -= SIZE_4K; /*In case there is no valid CPLB behind memory_end make sure we don't get to close*/ #endif @@ -315,8 +326,6 @@ void __init setup_arch(char **cmdline_p) init_mm.end_data = (unsigned long)_edata; init_mm.brk = (unsigned long)0; - init_leds(); - _bfin_swrst = bfin_read_SWRST(); if (_bfin_swrst & RESET_DOUBLE) diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c index beef057bd1dc..5bd64e341df3 100644 --- a/arch/blackfin/kernel/time.c +++ b/arch/blackfin/kernel/time.c @@ -42,75 +42,6 @@ static void time_sched_init(irqreturn_t(*timer_routine) (int, void *)); static unsigned long gettimeoffset(void); -static inline void do_leds(void); - -#if (defined(CONFIG_BFIN_ALIVE_LED) || defined(CONFIG_BFIN_IDLE_LED)) -void __init init_leds(void) -{ - unsigned int tmp = 0; - -#if defined(CONFIG_BFIN_ALIVE_LED) - /* config pins as output. */ - tmp = bfin_read_CONFIG_BFIN_ALIVE_LED_DPORT(); - SSYNC(); - bfin_write_CONFIG_BFIN_ALIVE_LED_DPORT(tmp | CONFIG_BFIN_ALIVE_LED_PIN); - SSYNC(); - - /* First set led be off */ - tmp = bfin_read_CONFIG_BFIN_ALIVE_LED_PORT(); - SSYNC(); - bfin_write_CONFIG_BFIN_ALIVE_LED_PORT(tmp | CONFIG_BFIN_ALIVE_LED_PIN); /* light off */ - SSYNC(); -#endif - -#if defined(CONFIG_BFIN_IDLE_LED) - /* config pins as output. */ - tmp = bfin_read_CONFIG_BFIN_IDLE_LED_DPORT(); - SSYNC(); - bfin_write_CONFIG_BFIN_IDLE_LED_DPORT(tmp | CONFIG_BFIN_IDLE_LED_PIN); - SSYNC(); - - /* First set led be off */ - tmp = bfin_read_CONFIG_BFIN_IDLE_LED_PORT(); - SSYNC(); - bfin_write_CONFIG_BFIN_IDLE_LED_PORT(tmp | CONFIG_BFIN_IDLE_LED_PIN); /* light off */ - SSYNC(); -#endif -} -#else -void __init init_leds(void) -{ -} -#endif - -#if defined(CONFIG_BFIN_ALIVE_LED) -static inline void do_leds(void) -{ - static unsigned int count = 50; - static int flag; - unsigned short tmp = 0; - - if (--count == 0) { - count = 50; - flag = ~flag; - } - tmp = bfin_read_CONFIG_BFIN_ALIVE_LED_PORT(); - SSYNC(); - - if (flag) - tmp &= ~CONFIG_BFIN_ALIVE_LED_PIN; /* light on */ - else - tmp |= CONFIG_BFIN_ALIVE_LED_PIN; /* light off */ - - bfin_write_CONFIG_BFIN_ALIVE_LED_PORT(tmp); - SSYNC(); - -} -#else -static inline void do_leds(void) -{ -} -#endif static struct irqaction bfin_timer_irq = { .name = "BFIN Timer Tick", @@ -205,7 +136,6 @@ irqreturn_t timer_interrupt(int irq, void *dummy) write_seqlock(&xtime_lock); do_timer(1); - do_leds(); #ifndef CONFIG_SMP update_process_times(user_mode(get_irq_regs())); diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 21a55ef19cbd..66b5f3e3ae2a 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -36,8 +36,10 @@ #include <asm/cacheflush.h> #include <asm/blackfin.h> #include <asm/irq_handler.h> +#include <linux/irq.h> #include <asm/trace.h> #include <asm/fixed_code.h> +#include <asm/dma.h> #ifdef CONFIG_KGDB # include <linux/debugger.h> @@ -170,7 +172,7 @@ asmlinkage void double_fault_c(struct pt_regs *fp) oops_in_progress = 1; printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n"); dump_bfin_process(fp); - dump_bfin_mem((void *)fp->retx); + dump_bfin_mem(fp); show_regs(fp); panic("Double Fault - unrecoverable event\n"); @@ -195,9 +197,13 @@ asmlinkage void trap_c(struct pt_regs *fp) * we will kernel panic, so the system reboots. * If KGDB is enabled, don't set this for kernel breakpoints */ - if ((bfin_read_IPEND() & 0xFFC0) + + /* TODO: check to see if we are in some sort of deferred HWERR + * that we should be able to recover from, not kernel panic + */ + if ((bfin_read_IPEND() & 0xFFC0) && (trapnr != VEC_STEP) #ifdef CONFIG_KGDB - && trapnr != VEC_EXCPT02 + && (trapnr != VEC_EXCPT02) #endif ){ console_verbose(); @@ -433,6 +439,36 @@ asmlinkage void trap_c(struct pt_regs *fp) /* 0x3D - Reserved, Caught by default */ /* 0x3E - Reserved, Caught by default */ /* 0x3F - Reserved, Caught by default */ + case VEC_HWERR: + info.si_code = BUS_ADRALN; + sig = SIGBUS; + switch (fp->seqstat & SEQSTAT_HWERRCAUSE) { + /* System MMR Error */ + case (SEQSTAT_HWERRCAUSE_SYSTEM_MMR): + info.si_code = BUS_ADRALN; + sig = SIGBUS; + printk(KERN_NOTICE HWC_x2(KERN_NOTICE)); + break; + /* External Memory Addressing Error */ + case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR): + info.si_code = BUS_ADRERR; + sig = SIGBUS; + printk(KERN_NOTICE HWC_x3(KERN_NOTICE)); + break; + /* Performance Monitor Overflow */ + case (SEQSTAT_HWERRCAUSE_PERF_FLOW): + printk(KERN_NOTICE HWC_x12(KERN_NOTICE)); + break; + /* RAISE 5 instruction */ + case (SEQSTAT_HWERRCAUSE_RAISE_5): + printk(KERN_NOTICE HWC_x18(KERN_NOTICE)); + break; + default: /* Reserved */ + printk(KERN_NOTICE HWC_default(KERN_NOTICE)); + break; + } + CHK_DEBUGGER_TRAP(); + break; default: info.si_code = TRAP_ILLTRAP; sig = SIGTRAP; @@ -447,7 +483,7 @@ asmlinkage void trap_c(struct pt_regs *fp) if (sig != SIGTRAP) { unsigned long stack; dump_bfin_process(fp); - dump_bfin_mem((void *)fp->retx); + dump_bfin_mem(fp); show_regs(fp); /* Print out the trace buffer if it makes sense */ @@ -461,6 +497,7 @@ asmlinkage void trap_c(struct pt_regs *fp) dump_bfin_trace_buffer(); show_stack(current, &stack); if (oops_in_progress) { + print_modules(); #ifndef CONFIG_ACCESS_CHECK printk(KERN_EMERG "Please turn on " "CONFIG_ACCESS_CHECK\n"); @@ -474,13 +511,6 @@ asmlinkage void trap_c(struct pt_regs *fp) info.si_addr = (void *)fp->pc; force_sig_info(sig, &info, current); - /* Ensure that bad return addresses don't end up in an infinite - * loop, due to speculative loads/reads. This needs to be done after - * the signal has been sent. - */ - if (trapnr == VEC_CPLB_I_M && sig != SIGTRAP) - fp->pc = SAFE_USER_INSTRUCTION; - trace_buffer_restore(j); return; } @@ -616,8 +646,10 @@ void dump_bfin_process(struct pt_regs *fp) if (oops_in_progress) printk(KERN_EMERG "Kernel OOPS in progress\n"); - if (context & 0x0020) - printk(KERN_NOTICE "Deferred excecption or HW Error context\n"); + if (context & 0x0020 && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) + printk(KERN_NOTICE "HW Error context\n"); + else if (context & 0x0020) + printk(KERN_NOTICE "Defered Exception context\n"); else if (context & 0x3FC0) printk(KERN_NOTICE "Interrupt context\n"); else if (context & 0x4000) @@ -645,59 +677,124 @@ void dump_bfin_process(struct pt_regs *fp) "No Valid process in current context\n"); } -void dump_bfin_mem(void *retaddr) +void dump_bfin_mem(struct pt_regs *fp) { + unsigned short *addr, *erraddr, val = 0, err = 0; + char sti = 0, buf[6]; - if (retaddr >= (void *)FIXED_CODE_START && retaddr < (void *)physical_mem_end -#if L1_CODE_LENGTH != 0 - /* FIXME: Copy the code out of L1 Instruction SRAM through dma - memcpy. */ - && !(retaddr >= (void *)L1_CODE_START - && retaddr < (void *)(L1_CODE_START + L1_CODE_LENGTH)) -#endif - ) { - int i = ((unsigned int)retaddr & 0xFFFFFFF0) - 32; - unsigned short x = 0; - printk(KERN_NOTICE "return address: [0x%p]; contents of:", retaddr); - for (; i < ((unsigned int)retaddr & 0xFFFFFFF0) + 32; i += 2) { - if (!(i & 0xF)) - printk("\n" KERN_NOTICE "0x%08x: ", i); - - if (get_user(x, (unsigned short *)i)) - break; + if (unlikely((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR)) + erraddr = (void *)fp->pc; + else + erraddr = (void *)fp->retx; + + printk(KERN_NOTICE "return address: [0x%p]; contents of:", erraddr); + + for (addr = (unsigned short *)((unsigned long)erraddr & ~0xF) - 0x10; + addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10; + addr++) { + if (!((unsigned long)addr & 0xF)) + printk("\n" KERN_NOTICE "0x%p: ", addr); + + if (get_user(val, addr)) { + if (addr >= (unsigned short *)L1_CODE_START && + addr < (unsigned short *)(L1_CODE_START + L1_CODE_LENGTH)) { + dma_memcpy(&val, addr, sizeof(val)); + sprintf(buf, "%04x", val); + } else if (addr >= (unsigned short *)FIXED_CODE_START && + addr <= (unsigned short *)memory_start) { + val = bfin_read16(addr); + sprintf(buf, "%04x", val); + } else { + val = 0; + sprintf(buf, "????"); + } + } else + sprintf(buf, "%04x", val); + + if (addr == erraddr) { + printk("[%s]", buf); + err = val; + } else + printk(" %s ", buf); + + /* Do any previous instructions turn on interrupts? */ + if (addr <= erraddr && /* in the past */ + ((val >= 0x0040 && val <= 0x0047) || /* STI instruction */ + val == 0x017b)) /* [SP++] = RETI */ + sti = 1; + } + + printk("\n"); + + /* Hardware error interrupts can be deferred */ + if (unlikely(sti && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR && + oops_in_progress)){ + printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n"); #ifndef CONFIG_DEBUG_HWERR - /* If one of the last few instructions was a STI - * it is likely that the error occured awhile ago - * and we just noticed. This only happens in kernel - * context, which should mean an oops is happening - */ - if (oops_in_progress && x >= 0x0040 && x <= 0x0047 && i <= 0) - panic("\n\nWARNING : You should reconfigure" - " the kernel to turn on\n" - " 'Hardware error interrupt" - " debugging'\n" - " The rest of this error" - " is meanless\n"); -#endif - if (i == (unsigned int)retaddr) - printk("[%04x]", x); - else - printk(" %04x ", x); + printk(KERN_NOTICE "The remaining message may be meaningless\n" + KERN_NOTICE "You should enable CONFIG_DEBUG_HWERR to get a" + " better idea where it came from\n"); +#else + /* If we are handling only one peripheral interrupt + * and current mm and pid are valid, and the last error + * was in that user space process's text area + * print it out - because that is where the problem exists + */ + if ((!(((fp)->ipend & ~0x30) & (((fp)->ipend & ~0x30) - 1))) && + (current->pid && current->mm)) { + /* And the last RETI points to the current userspace context */ + if ((fp + 1)->pc >= current->mm->start_code && + (fp + 1)->pc <= current->mm->end_code) { + printk(KERN_NOTICE "It might be better to look around here : \n"); + printk(KERN_NOTICE "-------------------------------------------\n"); + show_regs(fp + 1); + printk(KERN_NOTICE "-------------------------------------------\n"); + } } - printk("\n"); - } else - printk("\n" KERN_NOTICE - "Cannot look at the [PC] <%p> for it is" - " in unreadable memory - sorry\n", retaddr); +#endif + } } void show_regs(struct pt_regs *fp) { char buf [150]; + struct irqaction *action; + unsigned int i; + unsigned long flags; - printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\n"); + printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted()); printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n", (long)fp->seqstat, fp->ipend, fp->syscfg); + printk(KERN_NOTICE " HWERRCAUSE: 0x%lx\n", + (fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14); + printk(KERN_NOTICE " EXCAUSE : 0x%lx\n", + fp->seqstat & SEQSTAT_EXCAUSE); + for (i = 6; i <= 15 ; i++) { + if (fp->ipend & (1 << i)) { + decode_address(buf, bfin_read32(EVT0 + 4*i)); + printk(KERN_NOTICE " physical IVG%i asserted : %s\n", i, buf); + } + } + + /* if no interrupts are going off, don't print this out */ + if (fp->ipend & ~0x3F) { + for (i = 0; i < (NR_IRQS - 1); i++) { + spin_lock_irqsave(&irq_desc[i].lock, flags); + action = irq_desc[i].action; + if (!action) + goto unlock; + + decode_address(buf, (unsigned int)action->handler); + printk(KERN_NOTICE " logical irq %3d mapped : %s", i, buf); + for (action = action->next; action; action = action->next) { + decode_address(buf, (unsigned int)action->handler); + printk(", %s", buf); + } + printk("\n"); +unlock: + spin_unlock_irqrestore(&irq_desc[i].lock, flags); + } + } decode_address(buf, fp->rete); printk(KERN_NOTICE " RETE: %s\n", buf); @@ -708,9 +805,10 @@ void show_regs(struct pt_regs *fp) decode_address(buf, fp->rets); printk(KERN_NOTICE " RETS: %s\n", buf); decode_address(buf, fp->pc); - printk(KERN_NOTICE " PC: %s\n", buf); + printk(KERN_NOTICE " PC : %s\n", buf); - if ((long)fp->seqstat & SEQSTAT_EXCAUSE) { + if (((long)fp->seqstat & SEQSTAT_EXCAUSE) && + (((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) { decode_address(buf, bfin_read_DCPLB_FAULT_ADDR()); printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf); decode_address(buf, bfin_read_ICPLB_FAULT_ADDR()); @@ -824,7 +922,7 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp) printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", (void *)bfin_read_DCPLB_FAULT_ADDR()); printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", (void *)bfin_read_ICPLB_FAULT_ADDR()); dump_bfin_process(fp); - dump_bfin_mem((void *)fp->retx); + dump_bfin_mem(fp); show_regs(fp); dump_stack(); panic("Unrecoverable event\n"); diff --git a/arch/blackfin/lib/memcpy.S b/arch/blackfin/lib/memcpy.S index 2e6336492b4b..e654a18a0754 100644 --- a/arch/blackfin/lib/memcpy.S +++ b/arch/blackfin/lib/memcpy.S @@ -70,8 +70,8 @@ ENTRY(_memcpy) /* Check for aligned data.*/ R3 = R1 | R0; - R0 = 0x3; - R3 = R3 & R0; + R1 = 0x3; + R3 = R3 & R1; CC = R3; /* low bits set on either address? */ IF CC JUMP .Lnot_aligned; @@ -83,7 +83,6 @@ ENTRY(_memcpy) /* less than eight bytes... */ P2 = R2; LSETUP(.Lthree_start, .Lthree_end) LC0=P2; - R0 = R1; /* setup src address for return */ .Lthree_start: R3 = B[P1++] (X); .Lthree_end: @@ -95,7 +94,6 @@ ENTRY(_memcpy) /* There's at least eight bytes to copy. */ P2 += -1; /* because we unroll one iteration */ LSETUP(.Lword_loops, .Lword_loope) LC0=P2; - R0 = R1; I1 = P1; R3 = [I1++]; #if ANOMALY_05000202 @@ -120,7 +118,6 @@ ENTRY(_memcpy) .Lnot_aligned: /* From here, we're copying byte-by-byte. */ LSETUP (.Lbyte_start, .Lbyte_end) LC0=P2; - R0 = R1; /* Save src address for return */ .Lbyte_start: R1 = B[P1++] (X); .Lbyte_end: @@ -135,7 +132,6 @@ ENTRY(_memcpy) * Don't bother to work out alignment for * the reverse case. */ - R0 = R1; /* save src for later. */ P0 = P0 + P2; P0 += -1; P1 = P1 + P2; diff --git a/arch/blackfin/mach-bf527/Kconfig b/arch/blackfin/mach-bf527/Kconfig index 5c736837d4bf..3cde4beeb214 100644 --- a/arch/blackfin/mach-bf527/Kconfig +++ b/arch/blackfin/mach-bf527/Kconfig @@ -43,7 +43,7 @@ endchoice choice prompt "UART1" - default BF527_UART1_PORTG + default BF527_UART1_PORTF help Select PORT used for UART1. See Hardware Reference Manual diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 003e2ac654d8..f8c411a24af7 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -8,7 +8,7 @@ * * Modified: * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2007 Analog Devices Inc. + * Copyright 2004-2008 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -41,6 +41,7 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/usb/sl811.h> +#include <linux/usb/musb.h> #include <asm/cplb.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> @@ -105,6 +106,69 @@ void __exit bfin_isp1761_exit(void) arch_initcall(bfin_isp1761_init); #endif +#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +static struct resource musb_resources[] = { + [0] = { + .start = 0xffc03800, + .end = 0xffc03cff, + .flags = IORESOURCE_MEM, + }, + [1] = { /* general IRQ */ + .start = IRQ_USB_INT0, + .end = IRQ_USB_INT0, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, + [2] = { /* DMA IRQ */ + .start = IRQ_USB_DMA, + .end = IRQ_USB_DMA, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct musb_hdrc_platform_data musb_plat = { +#if defined(CONFIG_USB_MUSB_OTG) + .mode = MUSB_OTG, +#elif defined(CONFIG_USB_MUSB_HDRC_HCD) + .mode = MUSB_HOST, +#elif defined(CONFIG_USB_GADGET_MUSB_HDRC) + .mode = MUSB_PERIPHERAL, +#endif + .multipoint = 0, +}; + +static u64 musb_dmamask = ~(u32)0; + +static struct platform_device musb_device = { + .name = "musb_hdrc", + .id = 0, + .dev = { + .dma_mask = &musb_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &musb_plat, + }, + .num_resources = ARRAY_SIZE(musb_resources), + .resource = musb_resources, +}; +#endif + +#if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE) + +static struct resource bf52x_t350mcqb_resources[] = { + { + .start = IRQ_PPI_ERROR, + .end = IRQ_PPI_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bf52x_t350mcqb_device = { + .name = "bfin-t350mcqb", + .id = -1, + .num_resources = ARRAY_SIZE(bf52x_t350mcqb_resources), + .resource = bf52x_t350mcqb_resources, +}; +#endif + #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) static struct mtd_partition partition_info[] = { { @@ -253,12 +317,7 @@ static struct resource sl811_hcd_resources[] = { void sl811_port_power(struct device *dev, int is_on) { gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); - gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS); - - if (is_on) - gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1); - else - gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); } #endif @@ -718,6 +777,28 @@ static struct platform_device bfin_pata_device = { }; #endif +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/input.h> +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) &bf5xx_nand_device, @@ -739,6 +820,10 @@ static struct platform_device *stamp_devices[] __initdata = { &isp1362_hcd_device, #endif +#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) + &musb_device, +#endif + #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, #endif @@ -763,6 +848,10 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_fb_device, #endif +#if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE) + &bf52x_t350mcqb_device, +#endif + #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) &bfin_fb_adv7393_device, #endif @@ -783,6 +872,10 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, #endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif }; static int __init stamp_init(void) diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 6bcf4047f89c..a72c7a620fa1 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -40,6 +40,7 @@ #endif #include <linux/pata_platform.h> #include <linux/irq.h> + #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/reboot.h> @@ -303,7 +304,77 @@ static struct platform_device bfin_uart_device = { }; #endif -static struct platform_device *stamp_devices[] __initdata = { +#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) + +#include <linux/serial_8250.h> +#include <linux/serial.h> + +/* + * Configuration for two 16550 UARTS in FPGA at addresses 0x20200000 and 0x202000010. + * running at half system clock, both with interrupt output or-ed to PF8. Change to + * suit different FPGA configuration, or to suit real 16550 UARTS connected to the bus + */ + +static struct plat_serial8250_port serial8250_platform_data [] = { + { + .membase = 0x20200000, + .mapbase = 0x20200000, + .irq = IRQ_PF8, + .flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE, + .iotype = UPIO_MEM, + .regshift = 1, + .uartclk = 66666667, + }, { + .membase = 0x20200010, + .mapbase = 0x20200010, + .irq = IRQ_PF8, + .flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE, + .iotype = UPIO_MEM, + .regshift = 1, + .uartclk = 66666667, + }, { + } +}; + +static struct platform_device serial8250_device = { + .id = PLAT8250_DEV_PLATFORM, + .name = "serial8250", + .dev = { + .platform_data = serial8250_platform_data, + }, +}; + +#endif + +#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE) + +/* + * Configuration for one OpenCores keyboard controller in FPGA at address 0x20200030, + * interrupt output wired to PF9. Change to suit different FPGA configuration + */ + +static struct resource opencores_kbd_resources[] = { + [0] = { + .start = 0x20200030, + .end = 0x20300030 + 2, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PF9, + .end = IRQ_PF9, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + }, +}; + +static struct platform_device opencores_kbd_device = { + .id = -1, + .name = "opencores-kbd", + .resource = opencores_kbd_resources, + .num_resources = ARRAY_SIZE(opencores_kbd_resources), +}; +#endif + +static struct platform_device *h8606_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, #endif @@ -327,13 +398,21 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif + +#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) + &serial8250_device, +#endif + +#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE) + &opencores_kbd_device, +#endif }; static int __init H8606_init(void) { printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n"); printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); - platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); + platform_add_devices(h8606_devices, ARRAY_SIZE(h8606_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index be852034a68b..c37dd45c8803 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -256,6 +256,50 @@ static struct platform_device bfin_pata_device = { }; #endif +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/input.h> +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PF7, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PF8, 1, "gpio-keys: BTN1"}, + {BTN_2, GPIO_PF9, 1, "gpio-keys: BTN2"}, + {BTN_3, GPIO_PF10, 1, "gpio-keys: BTN3"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#include <linux/i2c-gpio.h> + +static struct i2c_gpio_platform_data i2c_gpio_data = { + .sda_pin = 1, + .scl_pin = 0, + .sda_is_open_drain = 0, + .scl_is_open_drain = 0, + .udelay = 40, +}; + +static struct platform_device i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &i2c_gpio_data, + }, +}; +#endif + static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, @@ -280,6 +324,14 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, #endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif + +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) + &i2c_gpio_device, +#endif }; static int __init ezkit_init(void) diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 8fde8d832850..ac52b040b336 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -32,6 +32,7 @@ #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) @@ -108,6 +109,50 @@ static struct platform_device net2272_bfin_device = { }; #endif +static struct mtd_partition stamp_partitions[] = { + { + .name = "Bootloader", + .size = 0x20000, + .offset = 0, + }, { + .name = "Kernel", + .size = 0xE0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "RootFS", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data stamp_flash_data = { + .width = 2, + .parts = stamp_partitions, + .nr_parts = ARRAY_SIZE(stamp_partitions), +}; + +static struct resource stamp_flash_resource[] = { + { + .name = "cfi_probe", + .start = 0x20000000, + .end = 0x203fffff, + .flags = IORESOURCE_MEM, + }, { + .start = CONFIG_ENET_FLASH_PIN, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device stamp_flash_device = { + .name = "BF5xx-Flash", + .id = 0, + .dev = { + .platform_data = &stamp_flash_data, + }, + .num_resources = ARRAY_SIZE(stamp_flash_resource), + .resource = stamp_flash_resource, +}; + #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ @@ -373,6 +418,49 @@ static struct platform_device bfin_pata_device = { }; #endif +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/input.h> +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PF5, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PF6, 1, "gpio-keys: BTN1"}, + {BTN_2, GPIO_PF8, 1, "gpio-keys: BTN2"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#include <linux/i2c-gpio.h> + +static struct i2c_gpio_platform_data i2c_gpio_data = { + .sda_pin = 2, + .scl_pin = 3, + .sda_is_open_drain = 0, + .scl_is_open_drain = 0, + .udelay = 40, +}; + +static struct platform_device i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &i2c_gpio_data, + }, +}; +#endif + static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -406,6 +494,15 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, #endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif + +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) + &i2c_gpio_device, +#endif + &stamp_flash_device, }; static int __init stamp_init(void) @@ -418,12 +515,10 @@ static int __init stamp_init(void) return ret; #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) -# if defined(CONFIG_BFIN_SHARED_FLASH_ENET) /* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */ bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (1 << CONFIG_ENET_FLASH_PIN)); bfin_write_FIO_FLAG_S(1 << CONFIG_ENET_FLASH_PIN); SSYNC(); -# endif #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) @@ -440,10 +535,8 @@ arch_initcall(stamp_init); void native_machine_restart(char *cmd) { -#if defined(CONFIG_BFIN_SHARED_FLASH_ENET) -# define BIT_TO_SET (1 << CONFIG_ENET_FLASH_PIN) +#define BIT_TO_SET (1 << CONFIG_ENET_FLASH_PIN) bfin_write_FIO_INEN(~BIT_TO_SET); bfin_write_FIO_DIR(BIT_TO_SET); bfin_write_FIO_FLAG_C(BIT_TO_SET); -#endif } diff --git a/arch/blackfin/mach-bf537/boards/Kconfig b/arch/blackfin/mach-bf537/boards/Kconfig index 96a15196e416..7e789dbef036 100644 --- a/arch/blackfin/mach-bf537/boards/Kconfig +++ b/arch/blackfin/mach-bf537/boards/Kconfig @@ -21,6 +21,12 @@ config PNAV10 help PNAV board support. +config CAMSIG_MINOTAUR + bool "Cambridge Signal Processing LTD Minotaur" + depends on (BF537) + help + Board supply package for CSP Minotaur + config GENERIC_BF537_BOARD bool "Generic" help diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile index 94a85174283a..87e450f29e37 100644 --- a/arch/blackfin/mach-bf537/boards/Makefile +++ b/arch/blackfin/mach-bf537/boards/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o obj-$(CONFIG_BFIN537_STAMP) += stamp.o led.o obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o obj-$(CONFIG_PNAV10) += pnav10.o +obj-$(CONFIG_CAMSIG_MINOTAUR) += minotaur.o diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index c0fb06dbc42e..8703b67d5ec6 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -29,6 +29,7 @@ */ #include <linux/device.h> +#include <linux/etherdevice.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -216,6 +217,12 @@ static struct platform_device rtc_device = { }; #endif +#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +static struct platform_device hitachi_fb_device = { + .name = "hitachi-tx09", +}; +#endif + #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) static struct resource smc91x_resources[] = { { @@ -374,6 +381,10 @@ static struct platform_device bfin_pata_device = { #endif static struct platform_device *cm_bf537_devices[] __initdata = { +#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) + &hitachi_fb_device, +#endif + #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, #endif diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index 09f4bfbd2350..3e52f3f5bd58 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -8,7 +8,7 @@ * * Modified: * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2007 Analog Devices Inc. + * Copyright 2004-2008 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -29,6 +29,7 @@ */ #include <linux/device.h> +#include <linux/etherdevice.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -204,12 +205,8 @@ static struct resource sl811_hcd_resources[] = { void sl811_port_power(struct device *dev, int is_on) { gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); - gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); - if (is_on) - gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1); - else - gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0); } #endif @@ -733,9 +730,11 @@ void native_machine_restart(char *cmd) bfin_gpio_reset_spi0_ssel1(); } +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) void bfin_get_ether_addr(char *addr) { random_ether_addr(addr); printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); } EXPORT_SYMBOL(bfin_get_ether_addr); +#endif diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c new file mode 100644 index 000000000000..b8bbba85af53 --- /dev/null +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -0,0 +1,317 @@ +/* + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#include <linux/usb_isp1362.h> +#endif +#include <linux/pata_platform.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/usb_sl811.h> +#include <asm/dma.h> +#include <asm/bfin5xx_spi.h> +#include <asm/reboot.h> +#include <linux/spi/ad7877.h> + +/* + * Name the Board for the /proc/cpuinfo + */ +char *bfin_board_name = "CamSig Minotaur BF537"; + +#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +static struct resource bfin_pcmcia_cf_resources[] = { + { + .start = 0x20310000, /* IO PORT */ + .end = 0x20312000, + .flags = IORESOURCE_MEM, + }, { + .start = 0x20311000, /* Attribute Memory */ + .end = 0x20311FFF, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PF4, + .end = IRQ_PF4, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, { + .start = IRQ_PF6, /* Card Detect PF6 */ + .end = IRQ_PF6, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pcmcia_cf_device = { + .name = "bfin_cf_pcmcia", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources), + .resource = bfin_pcmcia_cf_resources, +}; +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mac_device = { + .name = "bfin_mac", +}; +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +static struct resource net2272_bfin_resources[] = { + { + .start = 0x20300000, + .end = 0x20300000 + 0x100, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device net2272_bfin_device = { + .name = "net2272", + .id = -1, + .num_resources = ARRAY_SIZE(net2272_bfin_resources), + .resource = net2272_bfin_resources, +}; +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* all SPI peripherals info goes here */ + +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) + +/* Partition sizes */ +#define FLASH_SIZE 0x00400000 +#define PSIZE_UBOOT 0x00030000 +#define PSIZE_INITRAMFS 0x00240000 + +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "uboot", + .size = PSIZE_UBOOT, + .offset = 0x000000, + .mask_flags = MTD_CAP_ROM + }, { + .name = "initramfs", + .size = PSIZE_INITRAMFS, + .offset = PSIZE_UBOOT + }, { + .name = "opt", + .size = FLASH_SIZE - (PSIZE_UBOOT + PSIZE_INITRAMFS), + .offset = PSIZE_UBOOT + PSIZE_INITRAMFS, + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p64", +}; + +/* SPI flash chip (m25p64) */ +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, + .bits_per_word = 8, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc_dummy", + .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 0, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "spi_mmc", + .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, +#endif +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master bfin_spi0_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ +}; + +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bfin_spi0_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI, + .end = IRQ_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi_device = { + .name = "i2c-bfin-twi", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, +}; +#endif + +static struct platform_device *minotaur_devices[] __initdata = { +#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) + &bfin_pcmcia_cf_device, +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mac_device, +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + &net2272_bfin_device, +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &bfin_spi0_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) + &i2c_bfin_twi_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) + &bfin_sport0_uart_device, + &bfin_sport1_uart_device, +#endif + +}; + +static int __init minotaur_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + platform_add_devices(minotaur_devices, ARRAY_SIZE(minotaur_devices)); +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + spi_register_board_info(bfin_spi_board_info, + ARRAY_SIZE(bfin_spi_board_info)); +#endif + + return 0; +} + +arch_initcall(minotaur_init); + +void native_machine_restart(char *cmd) +{ + /* workaround reboot hang when booting from SPI */ + if ((bfin_read_SYSCR() & 0x7) == 0x3) + bfin_gpio_reset_spi0_ssel1(); +} diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index fd5f4a6f08e4..509a8a236fd0 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -8,7 +8,7 @@ * * Modified: * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2006 Analog Devices Inc. + * Copyright 2004-2008 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -29,6 +29,7 @@ */ #include <linux/device.h> +#include <linux/etherdevice.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -133,12 +134,8 @@ static struct resource sl811_hcd_resources[] = { void sl811_port_power(struct device *dev, int is_on) { gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); - gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); - if (is_on) - gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1); - else - gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0); } #endif diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 07b0dc273d2f..772541548b76 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -32,6 +32,7 @@ #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) @@ -103,6 +104,30 @@ void __exit bfin_isp1761_exit(void) arch_initcall(bfin_isp1761_init); #endif +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/input.h> +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PF2, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PF3, 1, "gpio-keys: BTN1"}, + {BTN_2, GPIO_PF4, 1, "gpio-keys: BTN2"}, + {BTN_3, GPIO_PF5, 1, "gpio-keys: BTN3"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) static struct resource bfin_pcmcia_cf_resources[] = { { @@ -226,12 +251,7 @@ static struct resource sl811_hcd_resources[] = { void sl811_port_power(struct device *dev, int is_on) { gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); - gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS); - - if (is_on) - gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1); - else - gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); } #endif @@ -320,6 +340,49 @@ static struct platform_device net2272_bfin_device = { }; #endif +static struct mtd_partition stamp_partitions[] = { + { + .name = "Bootloader", + .size = 0x20000, + .offset = 0, + }, { + .name = "Kernel", + .size = 0xE0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "RootFS", + .size = 0x400000 - 0x20000 - 0xE0000 - 0x10000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "MAC Address", + .size = MTDPART_SIZ_FULL, + .offset = 0x3F0000, + .mask_flags = MTD_WRITEABLE, + } +}; + +static struct physmap_flash_data stamp_flash_data = { + .width = 2, + .parts = stamp_partitions, + .nr_parts = ARRAY_SIZE(stamp_partitions), +}; + +static struct resource stamp_flash_resource = { + .start = 0x20000000, + .end = 0x203fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device stamp_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &stamp_flash_data, + }, + .num_resources = 1, + .resource = &stamp_flash_resource, +}; + #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ @@ -738,6 +801,11 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, #endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif + &stamp_flash_device, }; static int __init stamp_init(void) diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig index d8bd3b49f150..1bfcd8f646ab 100644 --- a/arch/blackfin/mach-bf548/Kconfig +++ b/arch/blackfin/mach-bf548/Kconfig @@ -7,7 +7,7 @@ menu "BF548 Specific Configuration" config DEB_DMA_URGENT bool "DMA has priority over core for ext. accesses" depends on BF54x - default n + default y help Treat any DEB1, DEB2 and DEB3 request as Urgent diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index d37d6653c4bc..14860f04d1bd 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -32,6 +32,7 @@ #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/irq.h> @@ -206,23 +207,6 @@ static struct platform_device smsc911x_device = { }; #endif -#if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE) -static struct resource bf54x_hcd_resources[] = { - { - .start = 0xFFC03C00, - .end = 0xFFC040FF, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device bf54x_hcd = { - .name = "bf54x-hcd", - .id = 0, - .num_resources = ARRAY_SIZE(bf54x_hcd_resources), - .resource = bf54x_hcd_resources, -}; -#endif - #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) static struct resource musb_resources[] = { [0] = { @@ -243,14 +227,14 @@ static struct resource musb_resources[] = { }; static struct musb_hdrc_platform_data musb_plat = { -#ifdef CONFIG_USB_MUSB_OTG +#if defined(CONFIG_USB_MUSB_OTG) .mode = MUSB_OTG, -#elif CONFIG_USB_MUSB_HDRC_HCD +#elif defined(CONFIG_USB_MUSB_HDRC_HCD) .mode = MUSB_HOST, -#elif CONFIG_USB_GADGET_MUSB_HDRC +#elif defined(CONFIG_USB_GADGET_MUSB_HDRC) .mode = MUSB_PERIPHERAL, #endif - .multipoint = 1, + .multipoint = 0, }; static u64 musb_dmamask = ~(u32)0; @@ -344,6 +328,44 @@ static struct platform_device bf54x_sdh_device = { }; #endif +static struct mtd_partition ezkit_partitions[] = { + { + .name = "Bootloader", + .size = 0x20000, + .offset = 0, + }, { + .name = "Kernel", + .size = 0xE0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "RootFS", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data ezkit_flash_data = { + .width = 2, + .parts = ezkit_partitions, + .nr_parts = ARRAY_SIZE(ezkit_partitions), +}; + +static struct resource ezkit_flash_resource = { + .start = 0x20000000, + .end = 0x20ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ezkit_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &ezkit_flash_data, + }, + .num_resources = 1, + .resource = &ezkit_flash_resource, +}; + #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ #if defined(CONFIG_MTD_M25P80) \ @@ -531,6 +553,29 @@ static struct platform_device i2c_bfin_twi1_device = { #endif #endif +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PB8, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PB9, 1, "gpio-keys: BTN1"}, + {BTN_2, GPIO_PB10, 1, "gpio-keys: BTN2"}, + {BTN_3, GPIO_PB11, 1, "gpio-keys: BTN3"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -548,10 +593,6 @@ static struct platform_device *ezkit_devices[] __initdata = { &smsc911x_device, #endif -#if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE) - &bf54x_hcd, -#endif - #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) &musb_device, #endif @@ -583,6 +624,11 @@ static struct platform_device *ezkit_devices[] __initdata = { &i2c_bfin_twi1_device, #endif #endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif + &ezkit_flash_device, }; static int __init stamp_init(void) diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index 74b34c7f3629..74fe258421a5 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -298,8 +298,8 @@ ENTRY(_start_dma_code) w[p0] = r0.l; ssync; - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); + p0.h = hi(SIC_IWR0); + p0.l = lo(SIC_IWR0); r0.l = 0x1; r0.h = 0x0; [p0] = r0; @@ -324,12 +324,25 @@ ENTRY(_start_dma_code) w[p0] = r0.l; ssync; +#if defined(CONFIG_BF54x) + P2.H = hi(EBIU_RSTCTL); + P2.L = lo(EBIU_RSTCTL); + R0 = [P2]; + BITSET (R0, 3); +#else P2.H = hi(EBIU_SDGCTL); P2.L = lo(EBIU_SDGCTL); R0 = [P2]; BITSET (R0, 24); +#endif [P2] = R0; SSYNC; +#if defined(CONFIG_BF54x) +.LSRR_MODE: + R0 = [P2]; + CC = BITTST(R0, 4); + if !CC JUMP .LSRR_MODE; +#endif r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ r0 = r0 << 9; /* Shift it over, */ @@ -361,6 +374,39 @@ ENTRY(_start_dma_code) w[p0] = r0.l; ssync; +#if defined(CONFIG_BF54x) + P2.H = hi(EBIU_RSTCTL); + P2.L = lo(EBIU_RSTCTL); + R0 = [P2]; + CC = BITTST(R0, 0); + if CC jump .Lskipddrrst; + BITSET (R0, 0); +.Lskipddrrst: + BITCLR (R0, 3); + [P2] = R0; + SSYNC; + + p0.l = lo(EBIU_DDRCTL0); + p0.h = hi(EBIU_DDRCTL0); + r0.l = lo(mem_DDRCTL0); + r0.h = hi(mem_DDRCTL0); + [p0] = r0; + ssync; + + p0.l = lo(EBIU_DDRCTL1); + p0.h = hi(EBIU_DDRCTL1); + r0.l = lo(mem_DDRCTL1); + r0.h = hi(mem_DDRCTL1); + [p0] = r0; + ssync; + + p0.l = lo(EBIU_DDRCTL2); + p0.h = hi(EBIU_DDRCTL2); + r0.l = lo(mem_DDRCTL2); + r0.h = hi(mem_DDRCTL2); + [p0] = r0; + ssync; +#else p0.l = lo(EBIU_SDRRC); p0.h = hi(EBIU_SDRRC); r0 = mem_SDRRC; @@ -394,9 +440,10 @@ ENTRY(_start_dma_code) R1 = R1 | R0; [P2] = R1; SSYNC; +#endif - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); + p0.h = hi(SIC_IWR0); + p0.l = lo(SIC_IWR0); r0.l = lo(IWR_ENABLE_ALL); r0.h = hi(IWR_ENABLE_ALL); [p0] = r0; diff --git a/arch/blackfin/mach-bf548/ints-priority.c b/arch/blackfin/mach-bf548/ints-priority.c index cb0ebac53c79..2665653cee37 100644 --- a/arch/blackfin/mach-bf548/ints-priority.c +++ b/arch/blackfin/mach-bf548/ints-priority.c @@ -4,7 +4,7 @@ * Author: Michael Hennerich * * Created: - * Description: Set up the interupt priorities + * Description: Set up the interrupt priorities * * Modified: * Copyright 2004-2006 Analog Devices Inc. @@ -58,7 +58,7 @@ void program_IAR(void) ((CONFIG_IRQ_PINT1 - 7) << IRQ_PINT1_POS) | ((CONFIG_IRQ_MDMAS0 - 7) << IRQ_MDMAS0_POS) | ((CONFIG_IRQ_MDMAS1 - 7) << IRQ_MDMAS1_POS) | - ((CONFIG_IRQ_WATCHDOG - 7) << IRQ_WATCHDOG_POS)); + ((CONFIG_IRQ_WATCHDOG - 7) << IRQ_WATCH_POS)); bfin_write_SIC_IAR3(((CONFIG_IRQ_DMAC1_ERR - 7) << IRQ_DMAC1_ERR_POS) | ((CONFIG_IRQ_SPORT2_ERR - 7) << IRQ_SPORT2_ERR_POS) | diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index c19cd29b948a..3a79a9061bdc 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -198,6 +198,13 @@ static struct platform_device bfin_spi0_device = { #endif /* spi master and devices */ +#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +static struct platform_device hitachi_fb_device = { + .name = "hitachi-tx09", +}; +#endif + + #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) static struct resource smc91x_resources[] = { @@ -315,6 +322,10 @@ static struct platform_device bfin_pata_device = { static struct platform_device *cm_bf561_devices[] __initdata = { +#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) + &hitachi_fb_device, +#endif + #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 4ff8f6e7a11f..7601c3be1b5c 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -29,6 +29,9 @@ #include <linux/device.h> #include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/irq.h> #include <linux/interrupt.h> @@ -155,6 +158,44 @@ static struct platform_device bfin_uart_device = { }; #endif +static struct mtd_partition ezkit_partitions[] = { + { + .name = "Bootloader", + .size = 0x20000, + .offset = 0, + }, { + .name = "Kernel", + .size = 0xE0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "RootFS", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data ezkit_flash_data = { + .width = 2, + .parts = ezkit_partitions, + .nr_parts = ARRAY_SIZE(ezkit_partitions), +}; + +static struct resource ezkit_flash_resource = { + .start = 0x20000000, + .end = 0x207fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ezkit_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &ezkit_flash_data, + }, + .num_resources = 1, + .resource = &ezkit_flash_resource, +}; + #ifdef CONFIG_SPI_BFIN #if defined(CONFIG_SND_BLACKFIN_AD1836) \ || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) @@ -246,6 +287,50 @@ static struct platform_device bfin_pata_device = { }; #endif +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/input.h> +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PF5, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PF6, 1, "gpio-keys: BTN1"}, + {BTN_2, GPIO_PF7, 1, "gpio-keys: BTN2"}, + {BTN_3, GPIO_PF8, 1, "gpio-keys: BTN3"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#include <linux/i2c-gpio.h> + +static struct i2c_gpio_platform_data i2c_gpio_data = { + .sda_pin = 1, + .scl_pin = 0, + .sda_is_open_drain = 0, + .scl_is_open_drain = 0, + .udelay = 40, +}; + +static struct platform_device i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &i2c_gpio_data, + }, +}; +#endif + static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, @@ -258,12 +343,23 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) &bfin_spi0_device, #endif + #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif + #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, #endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif + +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) + &i2c_gpio_device, +#endif + &ezkit_flash_device, }; static int __init ezkit_init(void) diff --git a/arch/blackfin/mach-bf561/coreb.c b/arch/blackfin/mach-bf561/coreb.c index 5d1d21b4c2a7..1b44e9e6dc3b 100644 --- a/arch/blackfin/mach-bf561/coreb.c +++ b/arch/blackfin/mach-bf561/coreb.c @@ -33,7 +33,9 @@ #include <linux/ioport.h> #include <linux/module.h> #include <linux/uaccess.h> +#include <linux/fs.h> #include <asm/dma.h> +#include <asm/cacheflush.h> #define MODULE_VER "v0.1" @@ -90,11 +92,12 @@ static ssize_t coreb_write(struct file *file, const char *buf, size_t count, coreb_dma_done = 0; + flush_dcache_range((unsigned long)buf, (unsigned long)(buf+len)); /* Source Channel */ set_dma_start_addr(CH_MEM_STREAM2_SRC, (unsigned long)buf); set_dma_x_count(CH_MEM_STREAM2_SRC, len); set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char)); - set_dma_config(CH_MEM_STREAM2_SRC, RESTART); + set_dma_config(CH_MEM_STREAM2_SRC, 0); /* Destination Channel */ set_dma_start_addr(CH_MEM_STREAM2_DEST, coreb_base + p); set_dma_x_count(CH_MEM_STREAM2_DEST, len); @@ -135,11 +138,12 @@ static ssize_t coreb_read(struct file *file, char *buf, size_t count, coreb_dma_done = 0; + invalidate_dcache_range((unsigned long)buf, (unsigned long)(buf+len)); /* Source Channel */ set_dma_start_addr(CH_MEM_STREAM2_SRC, coreb_base + p); set_dma_x_count(CH_MEM_STREAM2_SRC, len); set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char)); - set_dma_config(CH_MEM_STREAM2_SRC, RESTART); + set_dma_config(CH_MEM_STREAM2_SRC, 0); /* Destination Channel */ set_dma_start_addr(CH_MEM_STREAM2_DEST, (unsigned long)buf); set_dma_x_count(CH_MEM_STREAM2_DEST, len); @@ -266,7 +270,7 @@ static int coreb_ioctl(struct inode *inode, struct file *file, coreb_status |= COREB_IS_RUNNING; bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~0x0020); SSYNC(); - spin_lock_irq(&coreb_lock); + spin_unlock_irq(&coreb_lock); break; #if defined(CONFIG_BF561_COREB_RESET) case CMD_COREB_STOP: @@ -275,7 +279,7 @@ static int coreb_ioctl(struct inode *inode, struct file *file, bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() | 0x0020); bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080); coreb_status &= ~COREB_IS_RUNNING; - spin_lock_irq(&coreb_lock); + spin_unlock_irq(&coreb_lock); break; case CMD_COREB_RESET: printk(KERN_INFO "Resetting Core B\n"); diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile index 4d7733dfd5de..8636d4284bdb 100644 --- a/arch/blackfin/mach-common/Makefile +++ b/arch/blackfin/mach-common/Makefile @@ -3,10 +3,9 @@ # obj-y := \ - cache.o cacheinit.o cplbhdlr.o cplbmgr.o entry.o \ + cache.o cacheinit.o entry.o \ interrupt.o lock.o irqpanic.o arch_checks.o -obj-$(CONFIG_CPLB_INFO) += cplbinfo.o obj-$(CONFIG_BFIN_SINGLE_CORE) += ints-priority-sc.o obj-$(CONFIG_BFIN_DUAL_CORE) += ints-priority-dc.o obj-$(CONFIG_PM) += pm.o dpmc.o diff --git a/arch/blackfin/mach-common/dpmc.S b/arch/blackfin/mach-common/dpmc.S index 39fbc2861107..b82c096e1980 100644 --- a/arch/blackfin/mach-common/dpmc.S +++ b/arch/blackfin/mach-common/dpmc.S @@ -38,6 +38,9 @@ ENTRY(_unmask_wdog_wakeup_evt) #if defined(CONFIG_BF561) P0.H = hi(SICA_IWR1); P0.L = lo(SICA_IWR1); +#elif defined(CONFIG_BF54x) || defined(CONFIG_BF52x) + P0.h = HI(SIC_IWR0); + P0.l = LO(SIC_IWR0); #else P0.h = HI(SIC_IWR); P0.l = LO(SIC_IWR); @@ -172,7 +175,7 @@ ENTRY(_sleep_mode) call _set_sic_iwr; R0 = 0xFFFF (Z); - call _set_rtc_istat + call _set_rtc_istat; P0.H = hi(PLL_CTL); P0.L = lo(PLL_CTL); @@ -210,7 +213,7 @@ ENTRY(_hibernate_mode) call _set_sic_iwr; R0 = 0xFFFF (Z); - call _set_rtc_istat + call _set_rtc_istat; P0.H = hi(VR_CTL); P0.L = lo(VR_CTL); @@ -236,7 +239,7 @@ ENTRY(_deep_sleep) call _set_sic_iwr; - call _set_sdram_srfs; + call _set_dram_srfs; /* Clear all the interrupts,bits sticky */ R0 = 0xFFFF (Z); @@ -253,7 +256,7 @@ ENTRY(_deep_sleep) SSYNC; IDLE; - call _unset_sdram_srfs; + call _unset_dram_srfs; call _test_pll_locked; @@ -285,23 +288,22 @@ ENTRY(_sleep_deeper) P3 = R0; R0 = IWR_ENABLE(0); call _set_sic_iwr; - call _set_sdram_srfs; + call _set_dram_srfs; /* Set SDRAM Self Refresh */ /* Clear all the interrupts,bits sticky */ R0 = 0xFFFF (Z); - call _set_rtc_istat - + call _set_rtc_istat; P0.H = hi(PLL_DIV); P0.L = lo(PLL_DIV); R6 = W[P0](z); R0.L = 0xF; - W[P0] = R0.l; + W[P0] = R0.l; /* Set Max VCO to SCLK divider */ P0.H = hi(PLL_CTL); P0.L = lo(PLL_CTL); R5 = W[P0](z); R0.L = (CONFIG_MIN_VCO_HZ/CONFIG_CLKIN_HZ) << 9; - W[P0] = R0.l; + W[P0] = R0.l; /* Set Min CLKIN to VCO multiplier */ SSYNC; IDLE; @@ -317,29 +319,28 @@ ENTRY(_sleep_deeper) R1 = R1|R2; R2 = DEPOSIT(R7, R1); - W[P0] = R2; + W[P0] = R2; /* Set Min Core Voltage */ SSYNC; IDLE; call _test_pll_locked; + R0 = P3; + call _set_sic_iwr; /* Set Awake from IDLE */ + P0.H = hi(PLL_CTL); P0.L = lo(PLL_CTL); R0 = W[P0](z); BITSET (R0, 3); - W[P0] = R0.L; - - R0 = P3; - call _set_sic_iwr; - + W[P0] = R0.L; /* Turn CCLK OFF */ SSYNC; IDLE; call _test_pll_locked; R0 = IWR_ENABLE(0); - call _set_sic_iwr; + call _set_sic_iwr; /* Set Awake from IDLE PLL */ P0.H = hi(VR_CTL); P0.L = lo(VR_CTL); @@ -352,15 +353,15 @@ ENTRY(_sleep_deeper) P0.H = hi(PLL_DIV); P0.L = lo(PLL_DIV); - W[P0]= R6; + W[P0]= R6; /* Restore CCLK and SCLK divider */ P0.H = hi(PLL_CTL); P0.L = lo(PLL_CTL); - w[p0] = R5; + w[p0] = R5; /* Restore VCO multiplier */ IDLE; call _test_pll_locked; - call _unset_sdram_srfs; + call _unset_dram_srfs; /* SDRAM Self Refresh Off */ STI R4; @@ -368,25 +369,47 @@ ENTRY(_sleep_deeper) ( R7:0, P5:0 ) = [SP++]; RTS; -ENTRY(_set_sdram_srfs) - /* set the sdram to self refresh mode */ +ENTRY(_set_dram_srfs) + /* set the dram to self refresh mode */ +#if defined(CONFIG_BF54x) + P0.H = hi(EBIU_RSTCTL); + P0.L = lo(EBIU_RSTCTL); + R2 = [P0]; + R3.H = hi(SRREQ); + R3.L = lo(SRREQ); +#else P0.H = hi(EBIU_SDGCTL); P0.L = lo(EBIU_SDGCTL); R2 = [P0]; R3.H = hi(SRFS); R3.L = lo(SRFS); +#endif R2 = R2|R3; [P0] = R2; ssync; +#if defined(CONFIG_BF54x) +.LSRR_MODE: + R2 = [P0]; + CC = BITTST(R2, 4); + if !CC JUMP .LSRR_MODE; +#endif RTS; -ENTRY(_unset_sdram_srfs) - /* set the sdram out of self refresh mode */ +ENTRY(_unset_dram_srfs) + /* set the dram out of self refresh mode */ +#if defined(CONFIG_BF54x) + P0.H = hi(EBIU_RSTCTL); + P0.L = lo(EBIU_RSTCTL); + R2 = [P0]; + R3.H = hi(SRREQ); + R3.L = lo(SRREQ); +#else P0.H = hi(EBIU_SDGCTL); P0.L = lo(EBIU_SDGCTL); R2 = [P0]; R3.H = hi(SRFS); R3.L = lo(SRFS); +#endif R3 = ~R3; R2 = R2&R3; [P0] = R2; @@ -394,8 +417,13 @@ ENTRY(_unset_sdram_srfs) RTS; ENTRY(_set_sic_iwr) +#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) + P0.H = hi(SIC_IWR0); + P0.L = lo(SIC_IWR0); +#else P0.H = hi(SIC_IWR); P0.L = lo(SIC_IWR); +#endif [P0] = R0; SSYNC; RTS; diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index dc9d3ee2e691..56ff51bc8c21 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -95,6 +95,9 @@ ENTRY(_ex_workaround_261) R6 = 0x26; /* Data CPLB Miss */ cc = R6 == R7; if cc jump _ex_dcplb_miss (BP); + R6 = 0x23; /* Data CPLB Miss */ + cc = R6 == R7; + if cc jump _ex_dcplb_viol (BP); /* Handle 0x23 Data CPLB Protection Violation * and Data CPLB Multiple Hits - Linux Trap Zero */ @@ -102,17 +105,33 @@ ENTRY(_ex_workaround_261) ENDPROC(_ex_workaround_261) #else +#ifdef CONFIG_MPU +#define _ex_dviol _ex_dcplb_viol +#else #define _ex_dviol _ex_trap_c +#endif #define _ex_dmiss _ex_dcplb_miss #define _ex_dmult _ex_trap_c #endif + +ENTRY(_ex_dcplb_viol) ENTRY(_ex_dcplb_miss) ENTRY(_ex_icplb_miss) (R7:6,P5:4) = [sp++]; ASTAT = [sp++]; SAVE_ALL_SYS +#ifdef CONFIG_MPU + R0 = SEQSTAT; + R1 = SP; + sp += -12; + call _cplb_hdr; + sp += 12; + CC = R0 == 0; + IF !CC JUMP _handle_bad_cplb; +#else call __cplb_hdr; +#endif DEBUG_START_HWTRACE(p5, r7) RESTORE_ALL_SYS SP = EX_SCRATCH_REG; @@ -329,7 +348,7 @@ ENTRY(_exception_to_level5) R7 = R7 + R6; P5 = R7; R1 = [P5]; - [SP + 8] = r1; + [SP + PT_SEQSTAT] = r1; r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ SP += -12; @@ -633,9 +652,7 @@ ENTRY(_ret_from_exception) [sp + PT_IPEND] = r0; 1: - r1 = 0x37(Z); - r2 = ~r1; - r2.h = 0; + r2 = LO(~0x37) (Z); r0 = r2 & r0; cc = r0 == 0; if !cc jump 4f; /* if not return to user mode, get out */ @@ -1364,6 +1381,7 @@ ENTRY(_sys_call_table) .long _sys_set_robust_list .long _sys_get_robust_list /* 355 */ .long _sys_fallocate + .long _sys_semtimedop .rept NR_syscalls-(.-_sys_call_table)/4 .long _sys_ni_syscall .endr diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S index 4de376418a18..7f752c87fe46 100644 --- a/arch/blackfin/mach-common/interrupt.S +++ b/arch/blackfin/mach-common/interrupt.S @@ -34,9 +34,13 @@ #include <asm/entry.h> #include <asm/asm-offsets.h> #include <asm/trace.h> +#include <asm/traps.h> +#include <asm/thread_info.h> #include <asm/mach-common/context.S> +.extern _ret_from_exception + #ifdef CONFIG_I_ENTRY_L1 .section .l1.text #else @@ -117,8 +121,8 @@ __common_int_entry: #if ANOMALY_05000283 || ANOMALY_05000315 cc = r7 == r7; - p5.h = 0xffc0; - p5.l = 0x0014; + p5.h = HI(CHIPID); + p5.l = LO(CHIPID); if cc jump 1f; r7.l = W[p5]; 1: @@ -134,26 +138,22 @@ __common_int_entry: /* interrupt routine for ivhw - 5 */ ENTRY(_evt_ivhw) - SAVE_CONTEXT + SAVE_ALL_SYS #ifdef CONFIG_FRAME_POINTER fp = 0; #endif + #if ANOMALY_05000283 cc = r7 == r7; - p5.h = 0xffc0; - p5.l = 0x0014; + p5.h = HI(CHIPID); + p5.l = LO(CHIPID); if cc jump 1f; r7.l = W[p5]; 1: #endif - trace_buffer_stop(p0, r0); - - r0 = IRQ_HWERR; - r1 = sp; - #ifdef CONFIG_HARDWARE_PM - r7 = SEQSTAT; + r7 = [sp + PT_SEQSTAT]; r7 = r7 >>> 0xe; r6 = 0x1F; r7 = r7 & r6; @@ -161,11 +161,29 @@ ENTRY(_evt_ivhw) cc = r7 == r5; if cc jump .Lcall_do_ovf; /* deal with performance counter overflow */ #endif - + # We are going to dump something out, so make sure we print IPEND properly + p2.l = lo(IPEND); + p2.h = hi(IPEND); + r0 = [p2]; + [sp + PT_IPEND] = r0; + + /* set the EXCAUSE to HWERR for trap_c */ + r0 = [sp + PT_SEQSTAT]; + R1.L = LO(VEC_HWERR); + R1.H = HI(VEC_HWERR); + R0 = R0 | R1; + [sp + PT_SEQSTAT] = R0; + + r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ SP += -12; - call _irq_panic; + call _trap_c; SP += 12; + + call _ret_from_exception; +.Lcommon_restore_all_sys: + RESTORE_ALL_SYS rti; + #ifdef CONFIG_HARDWARE_PM .Lcall_do_ovf: @@ -173,9 +191,11 @@ ENTRY(_evt_ivhw) call _pm_overflow; SP += 12; - jump .Lcommon_restore_context; + jump .Lcommon_restore_all_sys; #endif +ENDPROC(_evt_ivhw) + /* Interrupt routine for evt2 (NMI). * We don't actually use this, so just return. * For inner circle type details, please see: diff --git a/arch/blackfin/mach-common/ints-priority-dc.c b/arch/blackfin/mach-common/ints-priority-dc.c index 4882f0e801a9..8d18d6b163bb 100644 --- a/arch/blackfin/mach-common/ints-priority-dc.c +++ b/arch/blackfin/mach-common/ints-priority-dc.c @@ -222,11 +222,12 @@ static void bf561_gpio_unmask_irq(unsigned int irq) static unsigned int bf561_gpio_irq_startup(unsigned int irq) { unsigned int ret; + char buf[8]; u16 gpionr = irq - IRQ_PF0; if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - - ret = gpio_request(gpionr, "IRQ"); + snprintf(buf, sizeof buf, "IRQ %d", irq); + ret = gpio_request(gpionr, buf); if (ret) return ret; @@ -250,6 +251,7 @@ static int bf561_gpio_irq_type(unsigned int irq, unsigned int type) { unsigned int ret; + char buf[8]; u16 gpionr = irq - IRQ_PF0; @@ -265,8 +267,8 @@ static int bf561_gpio_irq_type(unsigned int irq, unsigned int type) IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - - ret = gpio_request(gpionr, "IRQ"); + snprintf(buf, sizeof buf, "IRQ %d", irq); + ret = gpio_request(gpionr, buf); if (ret) return ret; diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c index 147f0731087a..dec42acb5de0 100644 --- a/arch/blackfin/mach-common/ints-priority-sc.c +++ b/arch/blackfin/mach-common/ints-priority-sc.c @@ -313,6 +313,7 @@ static void bfin_demux_error_irq(unsigned int int_err_irq, static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)]; static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)]; + static void bfin_gpio_ack_irq(unsigned int irq) { u16 gpionr = irq - IRQ_PF0; @@ -352,9 +353,11 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq) { unsigned int ret; u16 gpionr = irq - IRQ_PF0; + char buf[8]; if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - ret = gpio_request(gpionr, "IRQ"); + snprintf(buf, sizeof buf, "IRQ %d", irq); + ret = gpio_request(gpionr, buf); if (ret) return ret; } @@ -376,6 +379,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) { unsigned int ret; + char buf[8]; u16 gpionr = irq - IRQ_PF0; if (type == IRQ_TYPE_PROBE) { @@ -388,7 +392,8 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - ret = gpio_request(gpionr, "IRQ"); + snprintf(buf, sizeof buf, "IRQ %d", irq); + ret = gpio_request(gpionr, buf); if (ret) return ret; } @@ -478,6 +483,10 @@ static void bfin_demux_gpio_irq(unsigned int intb_irq, static unsigned char irq2pint_lut[NR_PINTS]; static unsigned char pint2irq_lut[NR_PINT_SYS_IRQS * NR_PINT_BITS]; +static unsigned int gpio_both_edge_triggered[NR_PINT_SYS_IRQS]; +static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)]; + + struct pin_int_t { unsigned int mask_set; unsigned int mask_clear; @@ -544,13 +553,20 @@ void init_pint_lut(void) } -static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)]; - static void bfin_gpio_ack_irq(unsigned int irq) { u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; + u32 pintbit = PINT_BIT(pint_val); + u8 bank = PINT_2_BANK(pint_val); + + if (unlikely(gpio_both_edge_triggered[bank] & pintbit)) { + if (pint[bank]->invert_set & pintbit) + pint[bank]->invert_clear = pintbit; + else + pint[bank]->invert_set = pintbit; + } + pint[bank]->request = pintbit; - pint[PINT_2_BANK(pint_val)]->request = PINT_BIT(pint_val); SSYNC(); } @@ -560,6 +576,13 @@ static void bfin_gpio_mask_ack_irq(unsigned int irq) u32 pintbit = PINT_BIT(pint_val); u8 bank = PINT_2_BANK(pint_val); + if (unlikely(gpio_both_edge_triggered[bank] & pintbit)) { + if (pint[bank]->invert_set & pintbit) + pint[bank]->invert_clear = pintbit; + else + pint[bank]->invert_set = pintbit; + } + pint[bank]->request = pintbit; pint[bank]->mask_clear = pintbit; SSYNC(); @@ -587,7 +610,8 @@ static void bfin_gpio_unmask_irq(unsigned int irq) static unsigned int bfin_gpio_irq_startup(unsigned int irq) { unsigned int ret; - u16 gpionr = irq - IRQ_PA0; + char buf[8]; + u16 gpionr = irq_to_gpio(irq); u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; if (pint_val == IRQ_NOT_AVAIL) { @@ -598,7 +622,8 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq) } if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - ret = gpio_request(gpionr, "IRQ"); + snprintf(buf, sizeof buf, "IRQ %d", irq); + ret = gpio_request(gpionr, buf); if (ret) return ret; } @@ -611,16 +636,19 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq) static void bfin_gpio_irq_shutdown(unsigned int irq) { + u16 gpionr = irq_to_gpio(irq); + bfin_gpio_mask_irq(irq); - gpio_free(irq - IRQ_PA0); - gpio_enabled[gpio_bank(irq - IRQ_PA0)] &= ~gpio_bit(irq - IRQ_PA0); + gpio_free(gpionr); + gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr); } static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) { unsigned int ret; - u16 gpionr = irq - IRQ_PA0; + char buf[8]; + u16 gpionr = irq_to_gpio(irq); u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; u32 pintbit = PINT_BIT(pint_val); u8 bank = PINT_2_BANK(pint_val); @@ -638,7 +666,8 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - ret = gpio_request(gpionr, "IRQ"); + snprintf(buf, sizeof buf, "IRQ %d", irq); + ret = gpio_request(gpionr, buf); if (ret) return ret; } @@ -651,28 +680,33 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) gpio_direction_input(gpionr); - if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { - pint[bank]->edge_set = pintbit; - } else { - pint[bank]->edge_clear = pintbit; - } - if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW))) pint[bank]->invert_set = pintbit; /* low or falling edge denoted by one */ else - pint[bank]->invert_set = pintbit; /* high or rising edge denoted by zero */ + pint[bank]->invert_clear = pintbit; /* high or rising edge denoted by zero */ - if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) - pint[bank]->invert_set = pintbit; - else - pint[bank]->invert_set = pintbit; + if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) + == (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { - SSYNC(); + gpio_both_edge_triggered[bank] |= pintbit; - if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) + if (gpio_get_value(gpionr)) + pint[bank]->invert_set = pintbit; + else + pint[bank]->invert_clear = pintbit; + } else { + gpio_both_edge_triggered[bank] &= ~pintbit; + } + + if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { + pint[bank]->edge_set = pintbit; set_irq_handler(irq, handle_edge_irq); - else + } else { + pint[bank]->edge_clear = pintbit; set_irq_handler(irq, handle_level_irq); + } + + SSYNC(); return 0; } diff --git a/arch/blackfin/mach-common/irqpanic.c b/arch/blackfin/mach-common/irqpanic.c index b22959b197e5..606ded9ff4e1 100644 --- a/arch/blackfin/mach-common/irqpanic.c +++ b/arch/blackfin/mach-common/irqpanic.c @@ -46,9 +46,6 @@ void irq_panic(int reason, struct pt_regs *regs) __attribute__ ((l1_text)); */ asmlinkage void irq_panic(int reason, struct pt_regs *regs) { - int sig = 0; - siginfo_t info; - #ifdef CONFIG_DEBUG_ICACHE_CHECK unsigned int cmd, tag, ca, cache_hi, cache_lo, *pa; unsigned short i, j, die; @@ -136,53 +133,6 @@ asmlinkage void irq_panic(int reason, struct pt_regs *regs) } #endif - printk(KERN_EMERG "\n"); - printk(KERN_EMERG "Exception: IRQ 0x%x entered\n", reason); - printk(KERN_EMERG " code=[0x%08lx], stack frame=0x%08lx, " - " bad PC=0x%08lx\n", - (unsigned long)regs->seqstat, - (unsigned long)regs, - (unsigned long)regs->pc); - if (reason == 0x5) { - printk(KERN_EMERG "----------- HARDWARE ERROR -----------\n"); - - /* There is only need to check for Hardware Errors, since other - * EXCEPTIONS are handled in TRAPS.c (MH) - */ - switch (regs->seqstat & SEQSTAT_HWERRCAUSE) { - case (SEQSTAT_HWERRCAUSE_SYSTEM_MMR): /* System MMR Error */ - info.si_code = BUS_ADRALN; - sig = SIGBUS; - printk(KERN_EMERG HWC_x2(KERN_EMERG)); - break; - case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR): /* External Memory Addressing Error */ - info.si_code = BUS_ADRERR; - sig = SIGBUS; - printk(KERN_EMERG HWC_x3(KERN_EMERG)); - break; - case (SEQSTAT_HWERRCAUSE_PERF_FLOW): /* Performance Monitor Overflow */ - printk(KERN_EMERG HWC_x12(KERN_EMERG)); - break; - case (SEQSTAT_HWERRCAUSE_RAISE_5): /* RAISE 5 instruction */ - printk(KERN_EMERG HWC_x18(KERN_EMERG)); - break; - default: /* Reserved */ - printk(KERN_EMERG HWC_default(KERN_EMERG)); - break; - } - } - - regs->ipend = bfin_read_IPEND(); - dump_bfin_process(regs); - dump_bfin_mem((void *)regs->pc); - show_regs(regs); - if (0 == (info.si_signo = sig) || 0 == user_mode(regs)) /* in kernelspace */ - panic("Unhandled IRQ or exceptions!\n"); - else { /* in userspace */ - info.si_errno = 0; - info.si_addr = (void *)regs->pc; - force_sig_info(sig, &info, current); - } } #ifdef CONFIG_HARDWARE_PM diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index dac51fb06f22..81930f7d06f1 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -77,7 +77,15 @@ void bfin_pm_suspend_standby_enter(void) gpio_pm_restore(); +#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) + bfin_write_SIC_IWR0(IWR_ENABLE_ALL); + bfin_write_SIC_IWR1(IWR_ENABLE_ALL); +# ifdef CONFIG_BF54x + bfin_write_SIC_IWR2(IWR_ENABLE_ALL); +# endif +#else bfin_write_SIC_IWR(IWR_ENABLE_ALL); +#endif local_irq_restore(flags); } @@ -85,7 +93,15 @@ void bfin_pm_suspend_standby_enter(void) #if defined(CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR) sleep_deeper(CONFIG_PM_WAKEUP_SIC_IWR); +# if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) + bfin_write_SIC_IWR0(IWR_ENABLE_ALL); + bfin_write_SIC_IWR1(IWR_ENABLE_ALL); +# ifdef CONFIG_BF54x + bfin_write_SIC_IWR2(IWR_ENABLE_ALL); +# endif +# else bfin_write_SIC_IWR(IWR_ENABLE_ALL); +# endif #endif /* CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR */ } diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index e97ea8fc8dc4..eb1a12ac9e33 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -128,8 +128,8 @@ void __init paging_init(void) void __init mem_init(void) { unsigned int codek = 0, datak = 0, initk = 0; + unsigned int reservedpages = 0, freepages = 0; unsigned long tmp; - unsigned int len = _ramend - _rambase; unsigned long start_mem = memory_start; unsigned long end_mem = memory_end; @@ -138,19 +138,36 @@ void __init mem_init(void) start_mem = PAGE_ALIGN(start_mem); max_mapnr = num_physpages = MAP_NR(high_memory); - printk(KERN_INFO "Physical pages: %lx\n", num_physpages); + printk(KERN_INFO "Kernel managed physical pages: %lu\n", + num_physpages); /* This will put all memory onto the freelists. */ totalram_pages = free_all_bootmem(); + reservedpages = 0; + for (tmp = 0; tmp < max_mapnr; tmp++) + if (PageReserved(pfn_to_page(tmp))) + reservedpages++; + freepages = max_mapnr - reservedpages; + + /* do not count in kernel image between _rambase and _ramstart */ + reservedpages -= (_ramstart - _rambase) >> PAGE_SHIFT; +#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263) + reservedpages += (_ramend - memory_end - DMA_UNCACHED_REGION) >> + PAGE_SHIFT; +#endif + codek = (_etext - _stext) >> 10; - datak = (__bss_stop - __bss_start) >> 10; initk = (__init_end - __init_begin) >> 10; + datak = ((_ramstart - _rambase) >> 10) - codek - initk; - tmp = nr_free_pages() << PAGE_SHIFT; printk(KERN_INFO - "Memory available: %luk/%uk RAM, (%uk init code, %uk kernel code, %uk data, %uk dma)\n", - tmp >> 10, len >> 10, initk, codek, datak, DMA_UNCACHED_REGION >> 10); + "Memory available: %luk/%luk RAM, " + "(%uk init code, %uk kernel code, " + "%uk data, %uk dma, %uk reserved)\n", + (unsigned long) freepages << (PAGE_SHIFT-10), _ramend >> 10, + initk, codek, datak, DMA_UNCACHED_REGION >> 10, + (reservedpages << (PAGE_SHIFT-10))); /* Initialize the blackfin L1 Memory. */ l1sram_init(); @@ -184,13 +201,15 @@ static __init void free_init_pages(const char *what, unsigned long begin, unsign #ifdef CONFIG_BLK_DEV_INITRD void __init free_initrd_mem(unsigned long start, unsigned long end) { +#ifndef CONFIG_MPU free_init_pages("initrd memory", start, end); +#endif } #endif void __init free_initmem(void) { -#ifdef CONFIG_RAMKERNEL +#if defined CONFIG_RAMKERNEL && !defined CONFIG_MPU free_init_pages("unused kernel memory", (unsigned long)(&__init_begin), (unsigned long)(&__init_end)); diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 6f475b609864..ac2a3ef28d55 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -442,7 +442,8 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP, INTR_ON_BUF, DIMENSION_LINEAR, - DATA_SIZE_8)); + DATA_SIZE_8, + DMA_SYNC_RESTART)); set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail)); set_dma_x_count(uart->tx_dma_channel, uart->tx_count); set_dma_x_modify(uart->tx_dma_channel, 1); @@ -689,7 +690,8 @@ static int bfin_serial_startup(struct uart_port *port) set_dma_config(uart->rx_dma_channel, set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO, INTR_ON_ROW, DIMENSION_2D, - DATA_SIZE_8)); + DATA_SIZE_8, + DMA_SYNC_RESTART)); set_dma_x_count(uart->rx_dma_channel, DMA_RX_XCOUNT); set_dma_x_modify(uart->rx_dma_channel, 1); set_dma_y_count(uart->rx_dma_channel, DMA_RX_YCOUNT); diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c index 74d11c318987..c8e7427a0bc8 100644 --- a/drivers/video/bf54x-lq043fb.c +++ b/drivers/video/bf54x-lq043fb.c @@ -224,7 +224,8 @@ static int config_dma(struct bfin_bf54xfb_info *fbi) set_dma_config(CH_EPPI0, set_bfin_dma_config(DIR_READ, DMA_FLOW_AUTO, INTR_DISABLE, DIMENSION_2D, - DATA_SIZE_32)); + DATA_SIZE_32, + DMA_NOSYNC_KEEP_DMA_BUF)); set_dma_x_count(CH_EPPI0, (LCD_X_RES * LCD_BPP) / DMA_BUS_SIZE); set_dma_x_modify(CH_EPPI0, DMA_BUS_SIZE / 8); set_dma_y_count(CH_EPPI0, LCD_Y_RES); @@ -263,8 +264,7 @@ static int request_ports(struct bfin_bf54xfb_info *fbi) } } - gpio_direction_output(disp); - gpio_set_value(disp, 1); + gpio_direction_output(disp, 1); return 0; } diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h index 39bdd86871cf..6ae0619d7696 100644 --- a/include/asm-blackfin/bfin-global.h +++ b/include/asm-blackfin/bfin-global.h @@ -51,7 +51,7 @@ extern unsigned long sclk_to_usecs(unsigned long sclk); extern unsigned long usecs_to_sclk(unsigned long usecs); extern void dump_bfin_process(struct pt_regs *regs); -extern void dump_bfin_mem(void *retaddr); +extern void dump_bfin_mem(struct pt_regs *regs); extern void dump_bfin_trace_buffer(void); extern int init_arch_irq(void); diff --git a/include/asm-blackfin/cplb-mpu.h b/include/asm-blackfin/cplb-mpu.h new file mode 100644 index 000000000000..75c67b99d607 --- /dev/null +++ b/include/asm-blackfin/cplb-mpu.h @@ -0,0 +1,61 @@ +/* + * File: include/asm-blackfin/cplbinit.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#ifndef __ASM_BFIN_CPLB_MPU_H +#define __ASM_BFIN_CPLB_MPU_H + +struct cplb_entry { + unsigned long data, addr; +}; + +struct mem_region { + unsigned long start, end; + unsigned long dcplb_data; + unsigned long icplb_data; +}; + +extern struct cplb_entry dcplb_tbl[MAX_CPLBS]; +extern struct cplb_entry icplb_tbl[MAX_CPLBS]; +extern int first_switched_icplb; +extern int first_mask_dcplb; +extern int first_switched_dcplb; + +extern int nr_dcplb_miss, nr_icplb_miss, nr_icplb_supv_miss, nr_dcplb_prot; +extern int nr_cplb_flush; + +extern int page_mask_order; +extern int page_mask_nelts; + +extern unsigned long *current_rwx_mask; + +extern void flush_switched_cplbs(void); +extern void set_mask_dcplbs(unsigned long *); + +extern void __noreturn panic_cplb_error(int seqstat, struct pt_regs *); + +#endif /* __ASM_BFIN_CPLB_MPU_H */ diff --git a/include/asm-blackfin/cplb.h b/include/asm-blackfin/cplb.h index 06828d77a58f..654375c2b746 100644 --- a/include/asm-blackfin/cplb.h +++ b/include/asm-blackfin/cplb.h @@ -65,7 +65,11 @@ #define SIZE_1M 0x00100000 /* 1M */ #define SIZE_4M 0x00400000 /* 4M */ +#ifdef CONFIG_MPU +#define MAX_CPLBS 16 +#else #define MAX_CPLBS (16 * 2) +#endif #define ASYNC_MEMORY_CPLB_COVERAGE ((ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \ ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE) / SIZE_4M) diff --git a/include/asm-blackfin/cplbinit.h b/include/asm-blackfin/cplbinit.h index c4d0596e8e9f..0eb1c1b685a7 100644 --- a/include/asm-blackfin/cplbinit.h +++ b/include/asm-blackfin/cplbinit.h @@ -33,6 +33,12 @@ #include <asm/blackfin.h> #include <asm/cplb.h> +#ifdef CONFIG_MPU + +#include <asm/cplb-mpu.h> + +#else + #define INITIAL_T 0x1 #define SWITCH_T 0x2 #define I_CPLB 0x4 @@ -79,6 +85,8 @@ extern u_long ipdt_swapcount_table[]; extern u_long dpdt_swapcount_table[]; #endif +#endif /* CONFIG_MPU */ + extern unsigned long reserved_mem_dcache_on; extern unsigned long reserved_mem_icache_on; diff --git a/include/asm-blackfin/dma.h b/include/asm-blackfin/dma.h index b469505af364..5abaa2cee8db 100644 --- a/include/asm-blackfin/dma.h +++ b/include/asm-blackfin/dma.h @@ -76,6 +76,9 @@ enum dma_chan_status { #define INTR_ON_BUF 2 #define INTR_ON_ROW 3 +#define DMA_NOSYNC_KEEP_DMA_BUF 0 +#define DMA_SYNC_RESTART 1 + struct dmasg { unsigned long next_desc_addr; unsigned long start_addr; @@ -157,7 +160,8 @@ void set_dma_y_count(unsigned int channel, unsigned short y_count); void set_dma_y_modify(unsigned int channel, short y_modify); void set_dma_config(unsigned int channel, unsigned short config); unsigned short set_bfin_dma_config(char direction, char flow_mode, - char intr_mode, char dma_mode, char width); + char intr_mode, char dma_mode, char width, + char syncmode); void set_dma_curr_addr(unsigned int channel, unsigned long addr); /* get curr status for polling */ diff --git a/include/asm-blackfin/gpio.h b/include/asm-blackfin/gpio.h index 33ce98ef7e0f..d0426c108262 100644 --- a/include/asm-blackfin/gpio.h +++ b/include/asm-blackfin/gpio.h @@ -7,7 +7,7 @@ * Description: * * Modified: - * Copyright 2004-2006 Analog Devices Inc. + * Copyright 2004-2008 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -304,39 +304,39 @@ **************************************************************/ #ifndef BF548_FAMILY -void set_gpio_dir(unsigned short, unsigned short); -void set_gpio_inen(unsigned short, unsigned short); -void set_gpio_polar(unsigned short, unsigned short); -void set_gpio_edge(unsigned short, unsigned short); -void set_gpio_both(unsigned short, unsigned short); -void set_gpio_data(unsigned short, unsigned short); -void set_gpio_maska(unsigned short, unsigned short); -void set_gpio_maskb(unsigned short, unsigned short); -void set_gpio_toggle(unsigned short); -void set_gpiop_dir(unsigned short, unsigned short); -void set_gpiop_inen(unsigned short, unsigned short); -void set_gpiop_polar(unsigned short, unsigned short); -void set_gpiop_edge(unsigned short, unsigned short); -void set_gpiop_both(unsigned short, unsigned short); -void set_gpiop_data(unsigned short, unsigned short); -void set_gpiop_maska(unsigned short, unsigned short); -void set_gpiop_maskb(unsigned short, unsigned short); -unsigned short get_gpio_dir(unsigned short); -unsigned short get_gpio_inen(unsigned short); -unsigned short get_gpio_polar(unsigned short); -unsigned short get_gpio_edge(unsigned short); -unsigned short get_gpio_both(unsigned short); -unsigned short get_gpio_maska(unsigned short); -unsigned short get_gpio_maskb(unsigned short); -unsigned short get_gpio_data(unsigned short); -unsigned short get_gpiop_dir(unsigned short); -unsigned short get_gpiop_inen(unsigned short); -unsigned short get_gpiop_polar(unsigned short); -unsigned short get_gpiop_edge(unsigned short); -unsigned short get_gpiop_both(unsigned short); -unsigned short get_gpiop_maska(unsigned short); -unsigned short get_gpiop_maskb(unsigned short); -unsigned short get_gpiop_data(unsigned short); +void set_gpio_dir(unsigned, unsigned short); +void set_gpio_inen(unsigned, unsigned short); +void set_gpio_polar(unsigned, unsigned short); +void set_gpio_edge(unsigned, unsigned short); +void set_gpio_both(unsigned, unsigned short); +void set_gpio_data(unsigned, unsigned short); +void set_gpio_maska(unsigned, unsigned short); +void set_gpio_maskb(unsigned, unsigned short); +void set_gpio_toggle(unsigned); +void set_gpiop_dir(unsigned, unsigned short); +void set_gpiop_inen(unsigned, unsigned short); +void set_gpiop_polar(unsigned, unsigned short); +void set_gpiop_edge(unsigned, unsigned short); +void set_gpiop_both(unsigned, unsigned short); +void set_gpiop_data(unsigned, unsigned short); +void set_gpiop_maska(unsigned, unsigned short); +void set_gpiop_maskb(unsigned, unsigned short); +unsigned short get_gpio_dir(unsigned); +unsigned short get_gpio_inen(unsigned); +unsigned short get_gpio_polar(unsigned); +unsigned short get_gpio_edge(unsigned); +unsigned short get_gpio_both(unsigned); +unsigned short get_gpio_maska(unsigned); +unsigned short get_gpio_maskb(unsigned); +unsigned short get_gpio_data(unsigned); +unsigned short get_gpiop_dir(unsigned); +unsigned short get_gpiop_inen(unsigned); +unsigned short get_gpiop_polar(unsigned); +unsigned short get_gpiop_edge(unsigned); +unsigned short get_gpiop_both(unsigned); +unsigned short get_gpiop_maska(unsigned); +unsigned short get_gpiop_maskb(unsigned); +unsigned short get_gpiop_data(unsigned); struct gpio_port_t { unsigned short data; @@ -382,8 +382,8 @@ struct gpio_port_t { #define PM_WAKE_LOW 0x8 #define PM_WAKE_BOTH_EDGES (PM_WAKE_RISING | PM_WAKE_FALLING) -int gpio_pm_wakeup_request(unsigned short gpio, unsigned char type); -void gpio_pm_wakeup_free(unsigned short gpio); +int gpio_pm_wakeup_request(unsigned gpio, unsigned char type); +void gpio_pm_wakeup_free(unsigned gpio); unsigned int gpio_pm_setup(void); void gpio_pm_restore(void); @@ -426,19 +426,19 @@ struct gpio_port_s { * MODIFICATION HISTORY : **************************************************************/ -int gpio_request(unsigned short, const char *); -void gpio_free(unsigned short); +int gpio_request(unsigned, const char *); +void gpio_free(unsigned); -void gpio_set_value(unsigned short gpio, unsigned short arg); -unsigned short gpio_get_value(unsigned short gpio); +void gpio_set_value(unsigned gpio, int arg); +int gpio_get_value(unsigned gpio); #ifndef BF548_FAMILY #define gpio_get_value(gpio) get_gpio_data(gpio) #define gpio_set_value(gpio, value) set_gpio_data(gpio, value) #endif -void gpio_direction_input(unsigned short gpio); -void gpio_direction_output(unsigned short gpio); +int gpio_direction_input(unsigned gpio); +int gpio_direction_output(unsigned gpio, int value); #include <asm-generic/gpio.h> /* cansleep wrappers */ #include <asm/irq.h> diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h index 0b867e6a76c4..15dbc21eed8b 100644 --- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h @@ -146,7 +146,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart) if (uart->rts_pin >= 0) { gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_output(uart->rts_pin); + gpio_direction_output(uart->rts_pin, 0); } #endif } diff --git a/include/asm-blackfin/mach-bf527/portmux.h b/include/asm-blackfin/mach-bf527/portmux.h index dcf001adc63c..ae4d205bfcf5 100644 --- a/include/asm-blackfin/mach-bf527/portmux.h +++ b/include/asm-blackfin/mach-bf527/portmux.h @@ -1,6 +1,8 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS + #define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0)) #define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0)) #define P_PPI0_D2 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0)) diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h index f36ff5af1b91..98209d40abba 100644 --- a/include/asm-blackfin/mach-bf533/anomaly.h +++ b/include/asm-blackfin/mach-bf533/anomaly.h @@ -7,9 +7,7 @@ */ /* This file shoule be up to date with: - * - Revision X, March 23, 2007; ADSP-BF533 Blackfin Processor Anomaly List - * - Revision AB, March 23, 2007; ADSP-BF532 Blackfin Processor Anomaly List - * - Revision W, March 23, 2007; ADSP-BF531 Blackfin Processor Anomaly List + * - Revision B, 12/10/2007; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -17,7 +15,7 @@ /* We do not support 0.1 or 0.2 silicon - sorry */ #if __SILICON_REVISION__ < 3 -# error Kernel will not work on BF533 silicon version 0.0, 0.1, or 0.2 +# error will not work on BF533 silicon version 0.0, 0.1, or 0.2 #endif #if defined(__ADSPBF531__) @@ -251,6 +249,12 @@ #define ANOMALY_05000192 (__SILICON_REVISION__ < 3) /* Internal Voltage Regulator may not start up */ #define ANOMALY_05000206 (__SILICON_REVISION__ < 3) +/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ +#define ANOMALY_05000357 (1) +/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ +#define ANOMALY_05000366 (1) +/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ +#define ANOMALY_05000371 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000266 (0) diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h index 69b9f8e120e9..7871d4313f49 100644 --- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h @@ -111,7 +111,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart) } if (uart->rts_pin >= 0) { gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_input(uart->rts_pin); + gpio_direction_input(uart->rts_pin, 0); } #endif } diff --git a/include/asm-blackfin/mach-bf533/portmux.h b/include/asm-blackfin/mach-bf533/portmux.h index 137f4884acfe..685a2651dcda 100644 --- a/include/asm-blackfin/mach-bf533/portmux.h +++ b/include/asm-blackfin/mach-bf533/portmux.h @@ -1,6 +1,8 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS + #define P_PPI0_CLK (P_DONTCARE) #define P_PPI0_FS1 (P_DONTCARE) #define P_PPI0_FS2 (P_DONTCARE) diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h index 2b66ecf489f7..746a794b3119 100644 --- a/include/asm-blackfin/mach-bf537/anomaly.h +++ b/include/asm-blackfin/mach-bf537/anomaly.h @@ -7,9 +7,7 @@ */ /* This file shoule be up to date with: - * - Revision M, March 13, 2007; ADSP-BF537 Blackfin Processor Anomaly List - * - Revision L, March 13, 2007; ADSP-BF536 Blackfin Processor Anomaly List - * - Revision M, March 13, 2007; ADSP-BF534 Blackfin Processor Anomaly List + * - Revision A, 09/04/2007; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -17,7 +15,7 @@ /* We do not support 0.1 silicon - sorry */ #if __SILICON_REVISION__ < 2 -# error Kernel will not work on BF537 silicon version 0.0 or 0.1 +# error will not work on BF537 silicon version 0.0 or 0.1 #endif #if defined(__ADSPBF534__) @@ -44,6 +42,8 @@ #define ANOMALY_05000122 (1) /* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */ #define ANOMALY_05000157 (__SILICON_REVISION__ < 2) +/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */ +#define ANOMALY_05000167 (1) /* PPI_DELAY not functional in PPI modes with 0 frame syncs */ #define ANOMALY_05000180 (1) /* Instruction Cache Is Not Functional */ @@ -130,6 +130,12 @@ #define ANOMALY_05000321 (__SILICON_REVISION__ < 3) /* EMAC RMII mode at 10-Base-T speed: RX frames not received properly */ #define ANOMALY_05000322 (1) +/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */ +#define ANOMALY_05000341 (__SILICON_REVISION__ >= 3) +/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ +#define ANOMALY_05000357 (1) +/* DMAs that Go Urgent during Tight Core Writes to External Memory Are Blocked */ +#define ANOMALY_05000359 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000125 (0) diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h index 6fb328f5186a..86e45c379838 100644 --- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h @@ -146,7 +146,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart) if (uart->rts_pin >= 0) { gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_output(uart->rts_pin); + gpio_direction_output(uart->rts_pin, 0); } #endif } diff --git a/include/asm-blackfin/mach-bf537/portmux.h b/include/asm-blackfin/mach-bf537/portmux.h index 5a3f7d3bf73d..78fee6e0f237 100644 --- a/include/asm-blackfin/mach-bf537/portmux.h +++ b/include/asm-blackfin/mach-bf537/portmux.h @@ -1,6 +1,8 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ +#define MAX_RESOURCES (MAX_BLACKFIN_GPIOS + GPIO_BANKSIZE) /* We additionally handle PORTJ */ + #define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0)) #define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0)) #define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0)) diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h index c5b63759cdee..850dc12eb7f2 100644 --- a/include/asm-blackfin/mach-bf548/anomaly.h +++ b/include/asm-blackfin/mach-bf548/anomaly.h @@ -7,7 +7,7 @@ */ /* This file shoule be up to date with: - * - Revision C, July 16, 2007; ADSP-BF549 Silicon Anomaly List + * - Revision E, 11/28/2007; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -26,47 +26,59 @@ /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ #define ANOMALY_05000272 (1) /* False Hardware Error Exception when ISR context is not restored */ -#define ANOMALY_05000281 (1) +#define ANOMALY_05000281 (__SILICON_REVISION__ < 1) /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */ -#define ANOMALY_05000304 (1) +#define ANOMALY_05000304 (__SILICON_REVISION__ < 1) /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ #define ANOMALY_05000310 (1) /* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ -#define ANOMALY_05000312 (1) +#define ANOMALY_05000312 (__SILICON_REVISION__ < 1) /* TWI Slave Boot Mode Is Not Functional */ -#define ANOMALY_05000324 (1) +#define ANOMALY_05000324 (__SILICON_REVISION__ < 1) /* External FIFO Boot Mode Is Not Functional */ -#define ANOMALY_05000325 (1) +#define ANOMALY_05000325 (__SILICON_REVISION__ < 1) /* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */ -#define ANOMALY_05000327 (1) +#define ANOMALY_05000327 (__SILICON_REVISION__ < 1) /* Incorrect Access of OTP_STATUS During otp_write() Function */ -#define ANOMALY_05000328 (1) +#define ANOMALY_05000328 (__SILICON_REVISION__ < 1) /* Synchronous Burst Flash Boot Mode Is Not Functional */ -#define ANOMALY_05000329 (1) +#define ANOMALY_05000329 (__SILICON_REVISION__ < 1) /* Host DMA Boot Mode Is Not Functional */ -#define ANOMALY_05000330 (1) +#define ANOMALY_05000330 (__SILICON_REVISION__ < 1) /* Inadequate Timing Margins on DDR DQS to DQ and DQM Skew */ -#define ANOMALY_05000334 (1) +#define ANOMALY_05000334 (__SILICON_REVISION__ < 1) /* Inadequate Rotary Debounce Logic Duration */ -#define ANOMALY_05000335 (1) +#define ANOMALY_05000335 (__SILICON_REVISION__ < 1) /* Phantom Interrupt Occurs After First Configuration of Host DMA Port */ -#define ANOMALY_05000336 (1) +#define ANOMALY_05000336 (__SILICON_REVISION__ < 1) /* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */ -#define ANOMALY_05000337 (1) +#define ANOMALY_05000337 (__SILICON_REVISION__ < 1) /* Slave-Mode SPI0 MISO Failure With CPHA = 0 */ -#define ANOMALY_05000338 (1) +#define ANOMALY_05000338 (__SILICON_REVISION__ < 1) /* If Memory Reads Are Enabled on SDH or HOSTDP, Other DMAC1 Peripherals Cannot Read */ -#define ANOMALY_05000340 (1) +#define ANOMALY_05000340 (__SILICON_REVISION__ < 1) /* Boot Host Wait (HWAIT) and Boot Host Wait Alternate (HWAITA) Signals Are Swapped */ -#define ANOMALY_05000344 (1) +#define ANOMALY_05000344 (__SILICON_REVISION__ < 1) /* USB Calibration Value Is Not Intialized */ -#define ANOMALY_05000346 (1) +#define ANOMALY_05000346 (__SILICON_REVISION__ < 1) /* Boot ROM Kernel Incorrectly Alters Reset Value of USB Register */ -#define ANOMALY_05000347 (1) +#define ANOMALY_05000347 (__SILICON_REVISION__ < 1) /* Data Lost when Core Reads SDH Data FIFO */ -#define ANOMALY_05000349 (1) +#define ANOMALY_05000349 (__SILICON_REVISION__ < 1) /* PLL Status Register Is Inaccurate */ -#define ANOMALY_05000351 (1) +#define ANOMALY_05000351 (__SILICON_REVISION__ < 1) +/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ +#define ANOMALY_05000357 (1) +/* External Memory Read Access Hangs Core With PLL Bypass */ +#define ANOMALY_05000360 (1) +/* DMAs that Go Urgent during Tight Core Writes to External Memory Are Blocked */ +#define ANOMALY_05000365 (1) +/* Addressing Conflict between Boot ROM and Asynchronous Memory */ +#define ANOMALY_05000369 (1) +/* Mobile DDR Operation Not Functional */ +#define ANOMALY_05000377 (1) +/* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */ +#define ANOMALY_05000378 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000125 (0) diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h index f21a1620e6bd..3770aa38ee9f 100644 --- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -186,7 +186,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart) if (uart->rts_pin >= 0) { gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_output(uart->rts_pin); + gpio_direction_output(uart->rts_pin, 0); } #endif } diff --git a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h index aefab3f618c1..19ddcd83c71f 100644 --- a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h +++ b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h @@ -244,39 +244,6 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_read_TWI0_RCV_DATA16() bfin_read16(TWI0_RCV_DATA16) #define bfin_write_TWI0_RCV_DATA16(val) bfin_write16(TWI0_RCV_DATA16, val) -#define bfin_read_TWI_CLKDIV() bfin_read16(TWI0_CLKDIV) -#define bfin_write_TWI_CLKDIV(val) bfin_write16(TWI0_CLKDIV, val) -#define bfin_read_TWI_CONTROL() bfin_read16(TWI0_CONTROL) -#define bfin_write_TWI_CONTROL(val) bfin_write16(TWI0_CONTROL, val) -#define bfin_read_TWI_SLAVE_CTRL() bfin_read16(TWI0_SLAVE_CTRL) -#define bfin_write_TWI_SLAVE_CTRL(val) bfin_write16(TWI0_SLAVE_CTRL, val) -#define bfin_read_TWI_SLAVE_STAT() bfin_read16(TWI0_SLAVE_STAT) -#define bfin_write_TWI_SLAVE_STAT(val) bfin_write16(TWI0_SLAVE_STAT, val) -#define bfin_read_TWI_SLAVE_ADDR() bfin_read16(TWI0_SLAVE_ADDR) -#define bfin_write_TWI_SLAVE_ADDR(val) bfin_write16(TWI0_SLAVE_ADDR, val) -#define bfin_read_TWI_MASTER_CTL() bfin_read16(TWI0_MASTER_CTRL) -#define bfin_write_TWI_MASTER_CTL(val) bfin_write16(TWI0_MASTER_CTRL, val) -#define bfin_read_TWI_MASTER_STAT() bfin_read16(TWI0_MASTER_STAT) -#define bfin_write_TWI_MASTER_STAT(val) bfin_write16(TWI0_MASTER_STAT, val) -#define bfin_read_TWI_MASTER_ADDR() bfin_read16(TWI0_MASTER_ADDR) -#define bfin_write_TWI_MASTER_ADDR(val) bfin_write16(TWI0_MASTER_ADDR, val) -#define bfin_read_TWI_INT_STAT() bfin_read16(TWI0_INT_STAT) -#define bfin_write_TWI_INT_STAT(val) bfin_write16(TWI0_INT_STAT, val) -#define bfin_read_TWI_INT_MASK() bfin_read16(TWI0_INT_MASK) -#define bfin_write_TWI_INT_MASK(val) bfin_write16(TWI0_INT_MASK, val) -#define bfin_read_TWI_FIFO_CTL() bfin_read16(TWI0_FIFO_CTRL) -#define bfin_write_TWI_FIFO_CTL(val) bfin_write16(TWI0_FIFO_CTRL, val) -#define bfin_read_TWI_FIFO_STAT() bfin_read16(TWI0_FIFO_STAT) -#define bfin_write_TWI_FIFO_STAT(val) bfin_write16(TWI0_FIFO_STAT, val) -#define bfin_read_TWI_XMT_DATA8() bfin_read16(TWI0_XMT_DATA8) -#define bfin_write_TWI_XMT_DATA8(val) bfin_write16(TWI0_XMT_DATA8, val) -#define bfin_read_TWI_XMT_DATA16() bfin_read16(TWI0_XMT_DATA16) -#define bfin_write_TWI_XMT_DATA16(val) bfin_write16(TWI0_XMT_DATA16, val) -#define bfin_read_TWI_RCV_DATA8() bfin_read16(TWI0_RCV_DATA8) -#define bfin_write_TWI_RCV_DATA8(val) bfin_write16(TWI0_RCV_DATA8, val) -#define bfin_read_TWI_RCV_DATA16() bfin_read16(TWI0_RCV_DATA16) -#define bfin_write_TWI_RCV_DATA16(val) bfin_write16(TWI0_RCV_DATA16, val) - /* SPORT0 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 bfin_read_()rocessors */ /* SPORT1 Registers */ diff --git a/include/asm-blackfin/mach-bf548/defBF542.h b/include/asm-blackfin/mach-bf548/defBF542.h index 32d07130200c..a7c809f29ede 100644 --- a/include/asm-blackfin/mach-bf548/defBF542.h +++ b/include/asm-blackfin/mach-bf548/defBF542.h @@ -432,8 +432,8 @@ #define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ #define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ -#define CMD_TIMEOUT 0x4 /* CMD Time Out */ -#define DAT_TIMEOUT 0x8 /* Data Time Out */ +#define CMD_TIME_OUT 0x4 /* CMD Time Out */ +#define DAT_TIME_OUT 0x8 /* Data Time Out */ #define TX_UNDERRUN 0x10 /* Transmit Underrun */ #define RX_OVERRUN 0x20 /* Receive Overrun */ #define CMD_RESP_END 0x40 /* CMD Response End */ diff --git a/include/asm-blackfin/mach-bf548/defBF548.h b/include/asm-blackfin/mach-bf548/defBF548.h index ecbca952985c..e46f56891e6a 100644 --- a/include/asm-blackfin/mach-bf548/defBF548.h +++ b/include/asm-blackfin/mach-bf548/defBF548.h @@ -1095,8 +1095,8 @@ #define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ #define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ -#define CMD_TIMEOUT 0x4 /* CMD Time Out */ -#define DAT_TIMEOUT 0x8 /* Data Time Out */ +#define CMD_TIME_OUT 0x4 /* CMD Time Out */ +#define DAT_TIME_OUT 0x8 /* Data Time Out */ #define TX_UNDERRUN 0x10 /* Transmit Underrun */ #define RX_OVERRUN 0x20 /* Receive Overrun */ #define CMD_RESP_END 0x40 /* CMD Response End */ diff --git a/include/asm-blackfin/mach-bf548/defBF54x_base.h b/include/asm-blackfin/mach-bf548/defBF54x_base.h index 319a48590c9c..08f90c21fe8a 100644 --- a/include/asm-blackfin/mach-bf548/defBF54x_base.h +++ b/include/asm-blackfin/mach-bf548/defBF54x_base.h @@ -1772,17 +1772,36 @@ #define TRP 0x3c0000 /* Pre charge-to-active command period */ #define TRAS 0x3c00000 /* Min Active-to-pre charge time */ #define TRC 0x3c000000 /* Active-to-active time */ +#define DDR_TRAS(x) ((x<<22)&TRAS) /* DDR tRAS = (1~15) cycles */ +#define DDR_TRP(x) ((x<<18)&TRP) /* DDR tRP = (1~15) cycles */ +#define DDR_TRC(x) ((x<<26)&TRC) /* DDR tRC = (1~15) cycles */ +#define DDR_TRFC(x) ((x<<14)&TRFC) /* DDR tRFC = (1~15) cycles */ +#define DDR_TREFI(x) (x&TREFI) /* DDR tRFC = (1~15) cycles */ /* Bit masks for EBIU_DDRCTL1 */ #define TRCD 0xf /* Active-to-Read/write delay */ -#define MRD 0xf0 /* Mode register set to active */ +#define TMRD 0xf0 /* Mode register set to active */ #define TWR 0x300 /* Write Recovery time */ #define DDRDATWIDTH 0x3000 /* DDR data width */ #define EXTBANKS 0xc000 /* External banks */ #define DDRDEVWIDTH 0x30000 /* DDR device width */ #define DDRDEVSIZE 0xc0000 /* DDR device size */ -#define TWWTR 0xf0000000 /* Write-to-read delay */ +#define TWTR 0xf0000000 /* Write-to-read delay */ +#define DDR_TWTR(x) ((x<<28)&TWTR) /* DDR tWTR = (1~15) cycles */ +#define DDR_TMRD(x) ((x<<4)&TMRD) /* DDR tMRD = (1~15) cycles */ +#define DDR_TWR(x) ((x<<8)&TWR) /* DDR tWR = (1~15) cycles */ +#define DDR_TRCD(x) (x&TRCD) /* DDR tRCD = (1~15) cycles */ +#define DDR_DATWIDTH 0x2000 /* DDR data width */ +#define EXTBANK_1 0 /* 1 external bank */ +#define EXTBANK_2 0x4000 /* 2 external banks */ +#define DEVSZ_64 0x40000 /* DDR External Bank Size = 64MB */ +#define DEVSZ_128 0x80000 /* DDR External Bank Size = 128MB */ +#define DEVSZ_256 0xc0000 /* DDR External Bank Size = 256MB */ +#define DEVSZ_512 0 /* DDR External Bank Size = 512MB */ +#define DEVWD_4 0 /* DDR Device Width = 4 Bits */ +#define DEVWD_8 0x10000 /* DDR Device Width = 8 Bits */ +#define DEVWD_16 0x20000 /* DDR Device Width = 16 Bits */ /* Bit masks for EBIU_DDRCTL2 */ @@ -1790,6 +1809,10 @@ #define CASLATENCY 0x70 /* CAS latency */ #define DLLRESET 0x100 /* DLL Reset */ #define REGE 0x1000 /* Register mode enable */ +#define CL_1_5 0x50 /* DDR CAS Latency = 1.5 cycles */ +#define CL_2 0x20 /* DDR CAS Latency = 2 cycles */ +#define CL_2_5 0x60 /* DDR CAS Latency = 2.5 cycles */ +#define CL_3 0x30 /* DDR CAS Latency = 3 cycles */ /* Bit masks for EBIU_DDRCTL3 */ @@ -2257,6 +2280,10 @@ #define CSEL 0x30 /* Core Select */ #define SSEL 0xf /* System Select */ +#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ +#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ +#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ +#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ /* Bit masks for PLL_CTL */ diff --git a/include/asm-blackfin/mach-bf548/irq.h b/include/asm-blackfin/mach-bf548/irq.h index 9fb7bc5399a8..c34507a3f1df 100644 --- a/include/asm-blackfin/mach-bf548/irq.h +++ b/include/asm-blackfin/mach-bf548/irq.h @@ -88,7 +88,7 @@ Events (highest priority) EMU 0 #define IRQ_PINT1 BFIN_IRQ(20) /* PINT1 Interrupt */ #define IRQ_MDMAS0 BFIN_IRQ(21) /* MDMA Stream 0 Interrupt */ #define IRQ_MDMAS1 BFIN_IRQ(22) /* MDMA Stream 1 Interrupt */ -#define IRQ_WATCHDOG BFIN_IRQ(23) /* Watchdog Interrupt */ +#define IRQ_WATCH BFIN_IRQ(23) /* Watchdog Interrupt */ #define IRQ_DMAC1_ERROR BFIN_IRQ(24) /* DMAC1 Status (Error) Interrupt */ #define IRQ_SPORT2_ERROR BFIN_IRQ(25) /* SPORT2 Error Interrupt */ #define IRQ_SPORT3_ERROR BFIN_IRQ(26) /* SPORT3 Error Interrupt */ @@ -406,7 +406,7 @@ Events (highest priority) EMU 0 #define IRQ_PINT1_POS 16 #define IRQ_MDMAS0_POS 20 #define IRQ_MDMAS1_POS 24 -#define IRQ_WATCHDOG_POS 28 +#define IRQ_WATCH_POS 28 /* IAR3 BIT FIELDS */ #define IRQ_DMAC1_ERR_POS 0 diff --git a/include/asm-blackfin/mach-bf548/mem_init.h b/include/asm-blackfin/mach-bf548/mem_init.h index 0cb279e973d7..befc2903d5a5 100644 --- a/include/asm-blackfin/mach-bf548/mem_init.h +++ b/include/asm-blackfin/mach-bf548/mem_init.h @@ -28,8 +28,68 @@ * If not, write to the Free Software Foundation, * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ +#define MIN_DDR_SCLK(x) (x*(CONFIG_SCLK_HZ/1000/1000)/1000 + 1) + +#if (CONFIG_MEM_MT46V32M16_6T) +#define DDR_SIZE DEVSZ_512 +#define DDR_WIDTH DEVWD_16 + +#define DDR_tRC DDR_TRC(MIN_DDR_SCLK(60)) +#define DDR_tRAS DDR_TRAS(MIN_DDR_SCLK(42)) +#define DDR_tRP DDR_TRP(MIN_DDR_SCLK(15)) +#define DDR_tRFC DDR_TRFC(MIN_DDR_SCLK(72)) +#define DDR_tREFI DDR_TREFI(MIN_DDR_SCLK(7800)) + +#define DDR_tRCD DDR_TRCD(MIN_DDR_SCLK(15)) +#define DDR_tWTR DDR_TWTR(1) +#define DDR_tMRD DDR_TMRD(MIN_DDR_SCLK(12)) +#define DDR_tWR DDR_TWR(MIN_DDR_SCLK(15)) +#endif + +#if (CONFIG_MEM_MT46V32M16_5B) +#define DDR_SIZE DEVSZ_512 +#define DDR_WIDTH DEVWD_16 + +#define DDR_tRC DDR_TRC(MIN_DDR_SCLK(55)) +#define DDR_tRAS DDR_TRAS(MIN_DDR_SCLK(40)) +#define DDR_tRP DDR_TRP(MIN_DDR_SCLK(15)) +#define DDR_tRFC DDR_TRFC(MIN_DDR_SCLK(70)) +#define DDR_tREFI DDR_TREFI(MIN_DDR_SCLK(7800)) + +#define DDR_tRCD DDR_TRCD(MIN_DDR_SCLK(15)) +#define DDR_tWTR DDR_TWTR(2) +#define DDR_tMRD DDR_TMRD(MIN_DDR_SCLK(10)) +#define DDR_tWR DDR_TWR(MIN_DDR_SCLK(15)) +#endif + +#if (CONFIG_MEM_GENERIC_BOARD) +#define DDR_SIZE DEVSZ_512 +#define DDR_WIDTH DEVWD_16 + +#define DDR_tRCD DDR_TRCD(3) +#define DDR_tWTR DDR_TWTR(2) +#define DDR_tWR DDR_TWR(2) +#define DDR_tMRD DDR_TMRD(2) +#define DDR_tRP DDR_TRP(3) +#define DDR_tRAS DDR_TRAS(7) +#define DDR_tRC DDR_TRC(10) +#define DDR_tRFC DDR_TRFC(12) +#define DDR_tREFI DDR_TREFI(1288) +#endif + +#if (CONFIG_SCLK_HZ <= 133333333) +#define DDR_CL CL_2 +#elif (CONFIG_SCLK_HZ <= 166666666) +#define DDR_CL CL_2_5 +#else +#define DDR_CL CL_3 +#endif + +#define mem_DDRCTL0 (DDR_tRP | DDR_tRAS | DDR_tRC | DDR_tRFC | DDR_tREFI) +#define mem_DDRCTL1 (DDR_DATWIDTH | EXTBANK_1 | DDR_SIZE | DDR_WIDTH | DDR_tWTR \ + | DDR_tMRD | DDR_tWR | DDR_tRCD) +#define mem_DDRCTL2 DDR_CL -#if (CONFIG_MEM_MT46V32M16) #if defined CONFIG_CLKIN_HALF #define CLKIN_HALF 1 diff --git a/include/asm-blackfin/mach-bf548/portmux.h b/include/asm-blackfin/mach-bf548/portmux.h index 6b485120015f..8177a567dcdb 100644 --- a/include/asm-blackfin/mach-bf548/portmux.h +++ b/include/asm-blackfin/mach-bf548/portmux.h @@ -1,6 +1,8 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS + #define P_SPORT2_TFS (P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0)) #define P_SPORT2_DTSEC (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0)) #define P_SPORT2_DTPRI (P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(0)) diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h index bed956456884..0c1d46193939 100644 --- a/include/asm-blackfin/mach-bf561/anomaly.h +++ b/include/asm-blackfin/mach-bf561/anomaly.h @@ -7,7 +7,7 @@ */ /* This file shoule be up to date with: - * - Revision N, March 28, 2007; ADSP-BF561 Silicon Anomaly List + * - Revision O, 11/15/2007; ADSP-BF561 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -15,7 +15,7 @@ /* We do not support 0.1, 0.2, or 0.4 silicon - sorry */ #if __SILICON_REVISION__ < 3 || __SILICON_REVISION__ == 4 -# error Kernel will not work on BF561 silicon version 0.0, 0.1, 0.2, or 0.4 +# error will not work on BF561 silicon version 0.0, 0.1, 0.2, or 0.4 #endif /* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */ @@ -208,6 +208,8 @@ #define ANOMALY_05000275 (__SILICON_REVISION__ > 2) /* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */ #define ANOMALY_05000276 (__SILICON_REVISION__ < 5) +/* Writes to an I/O data register one SCLK cycle after an edge is detected may clear interrupt */ +#define ANOMALY_05000277 (__SILICON_REVISION__ < 3) /* Disabling Peripherals with DMA Running May Cause DMA System Instability */ #define ANOMALY_05000278 (__SILICON_REVISION__ < 5) /* False Hardware Error Exception When ISR Context Is Not Restored */ @@ -246,6 +248,18 @@ #define ANOMALY_05000332 (__SILICON_REVISION__ < 5) /* Flag Data Register Writes One SCLK Cycle After Edge Is Detected May Clear Interrupt Status */ #define ANOMALY_05000333 (__SILICON_REVISION__ < 5) +/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available on Older Silicon) */ +#define ANOMALY_05000339 (__SILICON_REVISION__ < 5) +/* Memory DMA FIFO Causes Throughput Degradation on Writes to External Memory */ +#define ANOMALY_05000343 (__SILICON_REVISION__ < 5) +/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ +#define ANOMALY_05000357 (1) +/* Conflicting Column Address Widths Causes SDRAM Errors */ +#define ANOMALY_05000362 (1) +/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ +#define ANOMALY_05000366 (1) +/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ +#define ANOMALY_05000371 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000158 (0) diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h index 69b9f8e120e9..7871d4313f49 100644 --- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h @@ -111,7 +111,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart) } if (uart->rts_pin >= 0) { gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_input(uart->rts_pin); + gpio_direction_input(uart->rts_pin, 0); } #endif } diff --git a/include/asm-blackfin/mach-bf561/portmux.h b/include/asm-blackfin/mach-bf561/portmux.h index 132ad31665e3..a6ee8206efb6 100644 --- a/include/asm-blackfin/mach-bf561/portmux.h +++ b/include/asm-blackfin/mach-bf561/portmux.h @@ -1,6 +1,8 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS + #define P_PPI0_CLK (P_DONTCARE) #define P_PPI0_FS1 (P_DONTCARE) #define P_PPI0_FS2 (P_DONTCARE) diff --git a/include/asm-blackfin/mmu.h b/include/asm-blackfin/mmu.h index 11d52f1167d0..757e43906ed4 100644 --- a/include/asm-blackfin/mmu.h +++ b/include/asm-blackfin/mmu.h @@ -24,7 +24,9 @@ typedef struct { unsigned long exec_fdpic_loadmap; unsigned long interp_fdpic_loadmap; #endif - +#ifdef CONFIG_MPU + unsigned long *page_rwx_mask; +#endif } mm_context_t; #endif diff --git a/include/asm-blackfin/mmu_context.h b/include/asm-blackfin/mmu_context.h index c5c71a6aaf19..b5eb67596ad5 100644 --- a/include/asm-blackfin/mmu_context.h +++ b/include/asm-blackfin/mmu_context.h @@ -30,9 +30,12 @@ #ifndef __BLACKFIN_MMU_CONTEXT_H__ #define __BLACKFIN_MMU_CONTEXT_H__ +#include <linux/gfp.h> +#include <linux/sched.h> #include <asm/setup.h> #include <asm/page.h> #include <asm/pgalloc.h> +#include <asm/cplbinit.h> extern void *current_l1_stack_save; extern int nr_l1stack_tasks; @@ -50,6 +53,12 @@ static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm) { +#ifdef CONFIG_MPU + unsigned long p = __get_free_pages(GFP_KERNEL, page_mask_order); + mm->context.page_rwx_mask = (unsigned long *)p; + memset(mm->context.page_rwx_mask, 0, + page_mask_nelts * 3 * sizeof(long)); +#endif return 0; } @@ -73,6 +82,11 @@ static inline void destroy_context(struct mm_struct *mm) sram_free(tmp->addr); kfree(tmp); } +#ifdef CONFIG_MPU + if (current_rwx_mask == mm->context.page_rwx_mask) + current_rwx_mask = NULL; + free_pages((unsigned long)mm->context.page_rwx_mask, page_mask_order); +#endif } static inline unsigned long @@ -106,9 +120,21 @@ activate_l1stack(struct mm_struct *mm, unsigned long sp_base) #define deactivate_mm(tsk,mm) do { } while (0) -static inline void activate_mm(struct mm_struct *prev_mm, - struct mm_struct *next_mm) +#define activate_mm(prev, next) switch_mm(prev, next, NULL) + +static inline void switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm, + struct task_struct *tsk) { + if (prev_mm == next_mm) + return; +#ifdef CONFIG_MPU + if (prev_mm->context.page_rwx_mask == current_rwx_mask) { + flush_switched_cplbs(); + set_mask_dcplbs(next_mm->context.page_rwx_mask); + } +#endif + + /* L1 stack switching. */ if (!next_mm->context.l1_stack_save) return; if (next_mm->context.l1_stack_save == current_l1_stack_save) @@ -120,10 +146,36 @@ static inline void activate_mm(struct mm_struct *prev_mm, memcpy(l1_stack_base, current_l1_stack_save, l1_stack_len); } -static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, - struct task_struct *tsk) +#ifdef CONFIG_MPU +static inline void protect_page(struct mm_struct *mm, unsigned long addr, + unsigned long flags) +{ + unsigned long *mask = mm->context.page_rwx_mask; + unsigned long page = addr >> 12; + unsigned long idx = page >> 5; + unsigned long bit = 1 << (page & 31); + + if (flags & VM_MAYREAD) + mask[idx] |= bit; + else + mask[idx] &= ~bit; + mask += page_mask_nelts; + if (flags & VM_MAYWRITE) + mask[idx] |= bit; + else + mask[idx] &= ~bit; + mask += page_mask_nelts; + if (flags & VM_MAYEXEC) + mask[idx] |= bit; + else + mask[idx] &= ~bit; +} + +static inline void update_protections(struct mm_struct *mm) { - activate_mm(prev, next); + flush_switched_cplbs(); + set_mask_dcplbs(mm->context.page_rwx_mask); } +#endif #endif diff --git a/include/asm-blackfin/traps.h b/include/asm-blackfin/traps.h index ee1cbf73a9ab..f0e5f940d9ca 100644 --- a/include/asm-blackfin/traps.h +++ b/include/asm-blackfin/traps.h @@ -45,6 +45,10 @@ #define VEC_CPLB_I_M (44) #define VEC_CPLB_I_MHIT (45) #define VEC_ILL_RES (46) /* including unvalid supervisor mode insn */ +/* The hardware reserves (63) for future use - we use it to tell our + * normal exception handling code we have a hardware error + */ +#define VEC_HWERR (63) #ifndef __ASSEMBLY__ diff --git a/include/asm-blackfin/uaccess.h b/include/asm-blackfin/uaccess.h index 2233f8f9314d..22a410b8003b 100644 --- a/include/asm-blackfin/uaccess.h +++ b/include/asm-blackfin/uaccess.h @@ -31,7 +31,7 @@ static inline void set_fs(mm_segment_t fs) #define VERIFY_READ 0 #define VERIFY_WRITE 1 -#define access_ok(type,addr,size) _access_ok((unsigned long)(addr),(size)) +#define access_ok(type, addr, size) _access_ok((unsigned long)(addr), (size)) static inline int is_in_rom(unsigned long addr) { diff --git a/include/asm-blackfin/unistd.h b/include/asm-blackfin/unistd.h index 07ffe8b718c5..e98167358d26 100644 --- a/include/asm-blackfin/unistd.h +++ b/include/asm-blackfin/unistd.h @@ -369,8 +369,9 @@ #define __NR_set_robust_list 354 #define __NR_get_robust_list 355 #define __NR_fallocate 356 +#define __NR_semtimedop 357 -#define __NR_syscall 357 +#define __NR_syscall 358 #define NR_syscalls __NR_syscall /* Old optional stuff no one actually uses */ |