diff options
author | Huang Shijie <shijie8@gmail.com> | 2010-09-27 04:43:53 +0200 |
---|---|---|
committer | David Woodhouse <David.Woodhouse@intel.com> | 2010-10-25 01:49:57 +0200 |
commit | 12a40a57f762f569f58a393437d8c13864db390a (patch) | |
tree | 2ab939b100ff7604422e31719fc1621e7b2f7ee3 | |
parent | jffs2: drop unused model argument (diff) | |
download | linux-12a40a57f762f569f58a393437d8c13864db390a.tar.xz linux-12a40a57f762f569f58a393437d8c13864db390a.zip |
mtd: add init_size hook for NAND driver
Not all the NAND devices have all the information in additional
id bytes.
So add a hook in the nand_chip{} is a good method to calculate the
right value of oobsize, erasesize and so on.
Without the hook,you will get the wrong value, and you have to hack
in the ->scan_bbt() to change the wrong value which make the code
mess.
Signed-off-by: Huang Shijie <shijie8@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-rw-r--r-- | drivers/mtd/nand/nand_base.c | 6 | ||||
-rw-r--r-- | include/linux/mtd/nand.h | 6 |
2 files changed, 10 insertions, 2 deletions
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 0b70c175999c..53f4e41836f1 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2976,8 +2976,10 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, chip->chipsize = (uint64_t)type->chipsize << 20; - /* Newer devices have all the information in additional id bytes */ - if (!type->pagesize) { + if (!type->pagesize && chip->init_size) { + /* set the pagesize, oobsize, erasesize by the driver*/ + busw = chip->init_size(mtd, chip, id_data); + } else if (!type->pagesize) { int extid; /* The 3rd id byte holds MLC / multichip data */ chip->cellinfo = id_data[2]; diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 7666c42235c7..0f744547a48c 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -396,6 +396,10 @@ struct nand_buffers { * @block_markbad: [REPLACEABLE] mark the block bad * @cmd_ctrl: [BOARDSPECIFIC] hardwarespecific funtion for controlling * ALE/CLE/nCE. Also used to write command and address + * @init_size: [BOARDSPECIFIC] hardwarespecific funtion for setting + * mtd->oobsize, mtd->writesize and so on. + * @id_data contains the 8 bytes values of NAND_CMD_READID. + * Return with the bus width. * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing device ready/busy line * If set to NULL no access to ready/busy is available and the ready/busy information * is read from the chip status register @@ -452,6 +456,8 @@ struct nand_chip { int (*block_markbad)(struct mtd_info *mtd, loff_t ofs); void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl); + int (*init_size)(struct mtd_info *mtd, + struct nand_chip *this, u8 *id_data); int (*dev_ready)(struct mtd_info *mtd); void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr); int (*waitfunc)(struct mtd_info *mtd, struct nand_chip *this); |