Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI hotplug: Change link order of pciehp & acpiphp
  PCI hotplug: fakephp: Allocate PCI resources before adding the device
  PCI MSI: Fix undefined shift by 32
  PCI PM: Do not wait for buses in B2 or B3 during resume
  PCI PM: Power up devices before restoring their state
  PCI PM: Fix hibernation breakage on EeePC 701
  PCI: irq and pci_ids patch for Intel Tigerpoint DeviceIDs
  PCI PM: Fix suspend error paths and testing facility breakage

7 files changed, 80 insertions, 36 deletions

diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 4064345cf144..fecbce6e7d7c 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -572,6 +572,7 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route
 	case PCI_DEVICE_ID_INTEL_ICH7_1:
 	case PCI_DEVICE_ID_INTEL_ICH7_30:
 	case PCI_DEVICE_ID_INTEL_ICH7_31:
+	case PCI_DEVICE_ID_INTEL_TGP_LPC:
 	case PCI_DEVICE_ID_INTEL_ESB2_0:
 	case PCI_DEVICE_ID_INTEL_ICH8_0:
 	case PCI_DEVICE_ID_INTEL_ICH8_1:
diff --git a/drivers/pci/hotplug/Makefile b/drivers/pci/hotplug/Makefile
index e31fb91652ce..2aa117c8cd87 100644
--- a/drivers/pci/hotplug/Makefile
+++ b/drivers/pci/hotplug/Makefile
@@ -5,11 +5,15 @@
 obj-$(CONFIG_HOTPLUG_PCI)		+= pci_hotplug.o
 obj-$(CONFIG_HOTPLUG_PCI_COMPAQ)	+= cpqphp.o
 obj-$(CONFIG_HOTPLUG_PCI_IBM)		+= ibmphp.o
+
+# pciehp should be linked before acpiphp in order to allow the native driver
+# to attempt to bind first. We can then fall back to generic support.
+
+obj-$(CONFIG_HOTPLUG_PCI_PCIE)		+= pciehp.o
 obj-$(CONFIG_HOTPLUG_PCI_ACPI)		+= acpiphp.o
 obj-$(CONFIG_HOTPLUG_PCI_ACPI_IBM)	+= acpiphp_ibm.o
 obj-$(CONFIG_HOTPLUG_PCI_CPCI_ZT5550)	+= cpcihp_zt5550.o
 obj-$(CONFIG_HOTPLUG_PCI_CPCI_GENERIC)	+= cpcihp_generic.o
-obj-$(CONFIG_HOTPLUG_PCI_PCIE)		+= pciehp.o
 obj-$(CONFIG_HOTPLUG_PCI_SHPC)		+= shpchp.o
 obj-$(CONFIG_HOTPLUG_PCI_RPA)		+= rpaphp.o
 obj-$(CONFIG_HOTPLUG_PCI_RPA_DLPAR)	+= rpadlpar_io.o
diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c
index b0e7de9e536d..d8649e127298 100644
--- a/drivers/pci/hotplug/fakephp.c
+++ b/drivers/pci/hotplug/fakephp.c
@@ -195,13 +195,13 @@ static void remove_slot_worker(struct work_struct *work)
  * Tries hard not to re-enable already existing devices;
  * also handles scanning of subfunctions.
  */
-static void pci_rescan_slot(struct pci_dev *temp)
+static int pci_rescan_slot(struct pci_dev *temp)
 {
 	struct pci_bus *bus = temp->bus;
 	struct pci_dev *dev;
 	int func;
-	int retval;
 	u8 hdr_type;
+	int count = 0;
 
 	if (!pci_read_config_byte(temp, PCI_HEADER_TYPE, &hdr_type)) {
 		temp->hdr_type = hdr_type & 0x7f;
@@ -213,17 +213,12 @@ static void pci_rescan_slot(struct pci_dev *temp)
 				dbg("New device on %s function %x:%x\n",
 					bus->name, temp->devfn >> 3,
 					temp->devfn & 7);
-				retval = pci_bus_add_device(dev);
-				if (retval)
-					dev_err(&dev->dev, "error adding "
-						"device, continuing.\n");
-				else
-					add_slot(dev);
+				count++;
 			}
 		}
 		/* multifunction device? */
 		if (!(hdr_type & 0x80))
-			return;
+			return count;
 
 		/* continue scanning for other functions */
 		for (func = 1, temp->devfn++; func < 8; func++, temp->devfn++) {
@@ -239,16 +234,13 @@ static void pci_rescan_slot(struct pci_dev *temp)
 					dbg("New device on %s function %x:%x\n",
 						bus->name, temp->devfn >> 3,
 						temp->devfn & 7);
-					retval = pci_bus_add_device(dev);
-					if (retval)
-						dev_err(&dev->dev, "error adding "
-							"device, continuing.\n");
-					else
-						add_slot(dev);
+					count++;
 				}
 			}
 		}
 	}
+
+	return count;
 }
 
 
@@ -262,6 +254,8 @@ static void pci_rescan_bus(const struct pci_bus *bus)
 {
 	unsigned int devfn;
 	struct pci_dev *dev;
+	int retval;
+	int found = 0;
 	dev = alloc_pci_dev();
 	if (!dev)
 		return;
@@ -270,7 +264,23 @@ static void pci_rescan_bus(const struct pci_bus *bus)
 	dev->sysdata = bus->sysdata;
 	for (devfn = 0; devfn < 0x100; devfn += 8) {
 		dev->devfn = devfn;
-		pci_rescan_slot(dev);
+		found += pci_rescan_slot(dev);
+	}
+
+	if (found) {
+		pci_bus_assign_resources(bus);
+		list_for_each_entry(dev, &bus->devices, bus_list) {
+			/* Skip already-added devices */
+			if (dev->is_added)
+					continue;
+			retval = pci_bus_add_device(dev);
+			if (retval)
+				dev_err(&dev->dev,
+					"Error adding device, continuing\n");
+			else
+				add_slot(dev);
+		}
+		pci_bus_add_devices(bus);
 	}
 	kfree(dev);
 }
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 896a15d70f5b..44f15ff70c1d 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -103,6 +103,16 @@ static void msix_set_enable(struct pci_dev *dev, int enable)
 	}
 }
 
+/*
+ * Essentially, this is ((1 << (1 << x)) - 1), but without the
+ * undefinedness of a << 32.
+ */
+static inline __attribute_const__ u32 msi_mask(unsigned x)
+{
+	static const u32 mask[] = { 1, 2, 4, 0xf, 0xff, 0xffff, 0xffffffff };
+	return mask[x];
+}
+
 static void msix_flush_writes(struct irq_desc *desc)
 {
 	struct msi_desc *entry;
@@ -407,8 +417,7 @@ static int msi_capability_init(struct pci_dev *dev)
 
 		/* All MSIs are unmasked by default, Mask them all */
 		pci_read_config_dword(dev, base, &maskbits);
-		temp = (1 << multi_msi_capable(control));
-		temp = ((temp - 1) & ~temp);
+		temp = msi_mask((control & PCI_MSI_FLAGS_QMASK) >> 1);
 		maskbits |= temp;
 		pci_write_config_dword(dev, base, maskbits);
 		entry->msi_attrib.maskbits_mask = temp;
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 9de07b75b993..ab1d615425a8 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -370,6 +370,7 @@ static int pci_legacy_suspend(struct device *dev, pm_message_t state)
 	}
 
 	pci_save_state(pci_dev);
+	pci_dev->state_saved = true;
 	/*
 	 * This is for compatibility with existing code with legacy PM support.
 	 */
@@ -419,6 +420,7 @@ static int pci_legacy_resume(struct device *dev)
 static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev)
 {
 	pci_restore_standard_config(pci_dev);
+	pci_dev->state_saved = false;
 	pci_fixup_device(pci_fixup_resume_early, pci_dev);
 }
 
@@ -555,6 +557,13 @@ static int pci_pm_resume(struct device *dev)
 	struct device_driver *drv = dev->driver;
 	int error = 0;
 
+	/*
+	 * This is necessary for the suspend error path in which resume is
+	 * called without restoring the standard config registers of the device.
+	 */
+	if (pci_dev->state_saved)
+		pci_restore_standard_config(pci_dev);
+
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_resume(dev);
 
@@ -660,7 +669,10 @@ static int pci_pm_poweroff(struct device *dev)
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_suspend(dev, PMSG_HIBERNATE);
 
-	if (drv && drv->pm && drv->pm->poweroff) {
+	if (!drv || !drv->pm)
+		return 0;
+
+	if (drv->pm->poweroff) {
 		error = drv->pm->poweroff(dev);
 		suspend_report_result(drv->pm->poweroff, error);
 	}
@@ -710,6 +722,13 @@ static int pci_pm_restore(struct device *dev)
 	struct device_driver *drv = dev->driver;
 	int error = 0;
 
+	/*
+	 * This is necessary for the hibernation error path in which restore is
+	 * called without restoring the standard config registers of the device.
+	 */
+	if (pci_dev->state_saved)
+		pci_restore_standard_config(pci_dev);
+
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_resume(dev);
 
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 17bd9325a245..48807556b47a 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1393,35 +1393,35 @@ int pci_restore_standard_config(struct pci_dev *dev)
 	pci_power_t prev_state;
 	int error;
 
-	pci_restore_state(dev);
 	pci_update_current_state(dev, PCI_D0);
 
 	prev_state = dev->current_state;
 	if (prev_state == PCI_D0)
-		return 0;
+		goto Restore;
 
 	error = pci_raw_set_power_state(dev, PCI_D0, false);
 	if (error)
 		return error;
 
-	if (pci_is_bridge(dev)) {
-		if (prev_state > PCI_D1)
-			mdelay(PCI_PM_BUS_WAIT);
-	} else {
-		switch(prev_state) {
-		case PCI_D3cold:
-		case PCI_D3hot:
-			mdelay(pci_pm_d3_delay);
-			break;
-		case PCI_D2:
-			udelay(PCI_PM_D2_DELAY);
-			break;
-		}
+	/*
+	 * This assumes that we won't get a bus in B2 or B3 from the BIOS, but
+	 * we've made this assumption forever and it appears to be universally
+	 * satisfied.
+	 */
+	switch(prev_state) {
+	case PCI_D3cold:
+	case PCI_D3hot:
+		mdelay(pci_pm_d3_delay);
+		break;
+	case PCI_D2:
+		udelay(PCI_PM_D2_DELAY);
+		break;
 	}
 
 	dev->current_state = PCI_D0;
 
-	return 0;
+ Restore:
+	return pci_restore_state(dev);
 }
 
 /**
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index febc10ed3858..52a9fe08451c 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2425,6 +2425,7 @@
 #define PCI_DEVICE_ID_INTEL_ICH7_0	0x27b8
 #define PCI_DEVICE_ID_INTEL_ICH7_1	0x27b9
 #define PCI_DEVICE_ID_INTEL_ICH7_30	0x27b0
+#define PCI_DEVICE_ID_INTEL_TGP_LPC	0x27bc
 #define PCI_DEVICE_ID_INTEL_ICH7_31	0x27bd
 #define PCI_DEVICE_ID_INTEL_ICH7_17	0x27da
 #define PCI_DEVICE_ID_INTEL_ICH7_19	0x27dd