Add rtl8180 wireless driver

This patch adds a mac80211 based wireless driver for the rtl8180 and
rtl8185 PCI wireless cards.  Also included are some rtl8187 changes
required due to the relationship between that driver and this one.

Michael Wu is primarily responsible for the initial driver and rtl8185
support.  Andreas Merello provided the additional rtl8180 support.

Thanks to Jukka Ruohonen for the donating a rtl8185 card! It was very
helpful for the rtl8225z2 code.

The Signed-off-by information below is collected from the individual
patches submitted to wireless-2.6 before merging this driver upstream.

Signed-off-by: Andrea Merello <andreamrl@tiscali.it>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

18 files changed, 2777 insertions, 60 deletions

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 50a8b6c2fa00..f372960904b2 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -545,6 +545,62 @@ config USB_ZD1201
 	  To compile this driver as a module, choose M here: the
 	  module will be called zd1201.
 
+config RTL8180
+	tristate "Realtek 8180/8185 PCI support"
+	depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
+	select EEPROM_93CX6
+	---help---
+	  This is a driver for RTL8180 and RTL8185 based cards.
+	  These are PCI based chips found in cards such as:
+
+	  (RTL8185 802.11g)
+	  A-Link WL54PC
+
+	  (RTL8180 802.11b)
+	  Belkin F5D6020 v3
+	  Belkin F5D6020 v3
+	  Dlink DWL-610
+	  Dlink DWL-510
+	  Netgear MA521
+	  Level-One WPC-0101
+	  Acer Aspire 1357 LMi
+	  VCTnet PC-11B1
+	  Ovislink AirLive WL-1120PCM
+	  Mentor WL-PCI
+	  Linksys WPC11 v4
+	  TrendNET TEW-288PI
+	  D-Link DWL-520 Rev D
+	  Repotec RP-WP7126
+	  TP-Link TL-WN250/251
+	  Zonet ZEW1000
+	  Longshine LCS-8031-R
+	  HomeLine HLW-PCC200
+	  GigaFast WF721-AEX
+	  Planet WL-3553
+	  Encore ENLWI-PCI1-NT
+	  TrendNET TEW-266PC
+	  Gigabyte GN-WLMR101
+	  Siemens-fujitsu Amilo D1840W
+	  Edimax EW-7126
+	  PheeNet WL-11PCIR
+	  Tonze PC-2100T
+	  Planet WL-8303
+	  Dlink DWL-650 v M1
+	  Edimax EW-7106
+	  Q-Tec 770WC
+	  Topcom Skyr@cer 4011b
+	  Roper FreeLan 802.11b (edition 2004)
+	  Wistron Neweb Corp CB-200B
+	  Pentagram HorNET
+	  QTec 775WC
+	  TwinMOS Booming B Series
+	  Micronet SP906BB
+	  Sweex LC700010
+	  Surecom EP-9428
+	  Safecom SWLCR-1100
+
+	  Thanks to Realtek for their support!
+
 config RTL8187
 	tristate "Realtek 8187 USB support"
 	depends on MAC80211 && USB && WLAN_80211 && EXPERIMENTAL
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index 7e1535ece17a..6af7b158624e 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -47,7 +47,10 @@ obj-$(CONFIG_PCMCIA_WL3501)	+= wl3501_cs.o
 obj-$(CONFIG_USB_ZD1201)	+= zd1201.o
 obj-$(CONFIG_LIBERTAS)		+= libertas/
 
+rtl8180-objs		:= rtl8180_dev.o rtl8180_rtl8225.o rtl8180_sa2400.o rtl8180_max2820.o rtl8180_grf5101.o
 rtl8187-objs		:= rtl8187_dev.o rtl8187_rtl8225.o
+
+obj-$(CONFIG_RTL8180)	+= rtl8180.o
 obj-$(CONFIG_RTL8187)	+= rtl8187.o
 
 obj-$(CONFIG_ADM8211)	+= adm8211.o
diff --git a/drivers/net/wireless/rtl8180.h b/drivers/net/wireless/rtl8180.h
new file mode 100644
index 000000000000..0b333cacbd85
--- /dev/null
+++ b/drivers/net/wireless/rtl8180.h
@@ -0,0 +1,151 @@
+#ifndef RTL8180_H
+#define RTL8180_H
+
+#include "rtl818x.h"
+
+#define MAX_RX_SIZE IEEE80211_MAX_RTS_THRESHOLD
+
+#define RF_PARAM_ANALOGPHY	(1 << 0)
+#define RF_PARAM_ANTBDEFAULT	(1 << 1)
+#define RF_PARAM_CARRIERSENSE1	(1 << 2)
+#define RF_PARAM_CARRIERSENSE2	(1 << 3)
+
+#define BB_ANTATTEN_CHAN14	0x0C
+#define BB_ANTENNA_B 		0x40
+
+#define BB_HOST_BANG 		(1 << 30)
+#define BB_HOST_BANG_EN 	(1 << 2)
+#define BB_HOST_BANG_CLK 	(1 << 1)
+#define BB_HOST_BANG_DATA	1
+
+#define ANAPARAM_TXDACOFF_SHIFT	27
+#define ANAPARAM_PWR0_SHIFT	28
+#define ANAPARAM_PWR0_MASK 	(0x07 << ANAPARAM_PWR0_SHIFT)
+#define ANAPARAM_PWR1_SHIFT	20
+#define ANAPARAM_PWR1_MASK	(0x7F << ANAPARAM_PWR1_SHIFT)
+
+enum rtl8180_tx_desc_flags {
+	RTL8180_TX_DESC_FLAG_NO_ENC	= (1 << 15),
+	RTL8180_TX_DESC_FLAG_TX_OK	= (1 << 15),
+	RTL8180_TX_DESC_FLAG_SPLCP	= (1 << 16),
+	RTL8180_TX_DESC_FLAG_RX_UNDER	= (1 << 16),
+	RTL8180_TX_DESC_FLAG_MOREFRAG	= (1 << 17),
+	RTL8180_TX_DESC_FLAG_CTS	= (1 << 18),
+	RTL8180_TX_DESC_FLAG_RTS	= (1 << 23),
+	RTL8180_TX_DESC_FLAG_LS		= (1 << 28),
+	RTL8180_TX_DESC_FLAG_FS		= (1 << 29),
+	RTL8180_TX_DESC_FLAG_DMA	= (1 << 30),
+	RTL8180_TX_DESC_FLAG_OWN	= (1 << 31)
+};
+
+struct rtl8180_tx_desc {
+	__le32 flags;
+	__le16 rts_duration;
+	__le16 plcp_len;
+	__le32 tx_buf;
+	__le32 frame_len;
+	__le32 next_tx_desc;
+	u8 cw;
+	u8 retry_limit;
+	u8 agc;
+	u8 flags2;
+	u32 reserved[2];
+} __attribute__ ((packed));
+
+enum rtl8180_rx_desc_flags {
+	RTL8180_RX_DESC_FLAG_ICV_ERR	= (1 << 12),
+	RTL8180_RX_DESC_FLAG_CRC32_ERR	= (1 << 13),
+	RTL8180_RX_DESC_FLAG_PM		= (1 << 14),
+	RTL8180_RX_DESC_FLAG_RX_ERR	= (1 << 15),
+	RTL8180_RX_DESC_FLAG_BCAST	= (1 << 16),
+	RTL8180_RX_DESC_FLAG_PAM	= (1 << 17),
+	RTL8180_RX_DESC_FLAG_MCAST	= (1 << 18),
+	RTL8180_RX_DESC_FLAG_SPLCP	= (1 << 25),
+	RTL8180_RX_DESC_FLAG_FOF	= (1 << 26),
+	RTL8180_RX_DESC_FLAG_DMA_FAIL	= (1 << 27),
+	RTL8180_RX_DESC_FLAG_LS		= (1 << 28),
+	RTL8180_RX_DESC_FLAG_FS		= (1 << 29),
+	RTL8180_RX_DESC_FLAG_EOR	= (1 << 30),
+	RTL8180_RX_DESC_FLAG_OWN	= (1 << 31)
+};
+
+struct rtl8180_rx_desc {
+	__le32 flags;
+	__le32 flags2;
+	union {
+		__le32 rx_buf;
+		__le64 tsft;
+	};
+} __attribute__ ((packed));
+
+struct rtl8180_tx_ring {
+	struct rtl8180_tx_desc *desc;
+	dma_addr_t dma;
+	unsigned int idx;
+	unsigned int entries;
+	struct sk_buff_head queue;
+};
+
+struct rtl8180_priv {
+	/* common between rtl818x drivers */
+	struct rtl818x_csr __iomem *map;
+	const struct rtl818x_rf_ops *rf;
+	int mode;
+	int if_id;
+
+	/* rtl8180 driver specific */
+	spinlock_t lock;
+	struct rtl8180_rx_desc *rx_ring;
+	dma_addr_t rx_ring_dma;
+	unsigned int rx_idx;
+	struct sk_buff *rx_buf[32];
+	struct rtl8180_tx_ring tx_ring[4];
+	struct ieee80211_channel channels[14];
+	struct ieee80211_rate rates[12];
+	struct ieee80211_hw_mode modes[2];
+	struct pci_dev *pdev;
+	u32 rx_conf;
+
+	int r8185;
+	u32 anaparam;
+	u16 rfparam;
+	u8 csthreshold;
+};
+
+void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);
+void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam);
+
+static inline u8 rtl818x_ioread8(struct rtl8180_priv *priv, u8 __iomem *addr)
+{
+	return ioread8(addr);
+}
+
+static inline u16 rtl818x_ioread16(struct rtl8180_priv *priv, __le16 __iomem *addr)
+{
+	return ioread16(addr);
+}
+
+static inline u32 rtl818x_ioread32(struct rtl8180_priv *priv, __le32 __iomem *addr)
+{
+	return ioread32(addr);
+}
+
+static inline void rtl818x_iowrite8(struct rtl8180_priv *priv,
+				    u8 __iomem *addr, u8 val)
+{
+	iowrite8(val, addr);
+}
+
+static inline void rtl818x_iowrite16(struct rtl8180_priv *priv,
+				     __le16 __iomem *addr, u16 val)
+{
+	iowrite16(val, addr);
+}
+
+static inline void rtl818x_iowrite32(struct rtl8180_priv *priv,
+				     __le32 __iomem *addr, u32 val)
+{
+	iowrite32(val, addr);
+}
+
+#endif /* RTL8180_H */
diff --git a/drivers/net/wireless/rtl8180_dev.c b/drivers/net/wireless/rtl8180_dev.c
new file mode 100644
index 000000000000..4b7b032c194a
--- /dev/null
+++ b/drivers/net/wireless/rtl8180_dev.c
@@ -0,0 +1,1048 @@
+
+/*
+ * Linux device driver for RTL8180 / RTL8185
+ *
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
+ *
+ * Based on the r8180 driver, which is:
+ * Copyright 2004-2005 Andrea Merello <andreamrl@tiscali.it>, et al.
+ *
+ * Thanks to Realtek for their support!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/eeprom_93cx6.h>
+#include <net/mac80211.h>
+
+#include "rtl8180.h"
+#include "rtl8180_rtl8225.h"
+#include "rtl8180_sa2400.h"
+#include "rtl8180_max2820.h"
+#include "rtl8180_grf5101.h"
+
+MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
+MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
+MODULE_DESCRIPTION("RTL8180 / RTL8185 PCI wireless driver");
+MODULE_LICENSE("GPL");
+
+static struct pci_device_id rtl8180_table[] __devinitdata = {
+	/* rtl8185 */
+	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8185) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x701f) },
+
+	/* rtl8180 */
+	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8180) },
+	{ PCI_DEVICE(0x1799, 0x6001) },
+	{ PCI_DEVICE(0x1799, 0x6020) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x3300) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(pci, rtl8180_table);
+
+void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	int i = 10;
+	u32 buf;
+
+	buf = (data << 8) | addr;
+
+	rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf | 0x80);
+	while (i--) {
+		rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf);
+		if (rtl818x_ioread8(priv, &priv->map->PHY[2]) == (data & 0xFF))
+			return;
+	}
+}
+
+static void rtl8180_handle_rx(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	unsigned int count = 32;
+
+	while (count--) {
+		struct rtl8180_rx_desc *entry = &priv->rx_ring[priv->rx_idx];
+		struct sk_buff *skb = priv->rx_buf[priv->rx_idx];
+		u32 flags = le32_to_cpu(entry->flags);
+
+		if (flags & RTL8180_RX_DESC_FLAG_OWN)
+			return;
+
+		if (unlikely(flags & (RTL8180_RX_DESC_FLAG_DMA_FAIL |
+				      RTL8180_RX_DESC_FLAG_FOF |
+				      RTL8180_RX_DESC_FLAG_RX_ERR)))
+			goto done;
+		else {
+			u32 flags2 = le32_to_cpu(entry->flags2);
+			struct ieee80211_rx_status rx_status = {0};
+			struct sk_buff *new_skb = dev_alloc_skb(MAX_RX_SIZE);
+
+			if (unlikely(!new_skb))
+				goto done;
+
+			pci_unmap_single(priv->pdev,
+					 *((dma_addr_t *)skb->cb),
+					 MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+			skb_put(skb, flags & 0xFFF);
+
+			rx_status.antenna = (flags2 >> 15) & 1;
+			/* TODO: improve signal/rssi reporting */
+			rx_status.signal = flags2 & 0xFF;
+			rx_status.ssi = (flags2 >> 8) & 0x7F;
+			rx_status.rate = (flags >> 20) & 0xF;
+			rx_status.freq = dev->conf.freq;
+			rx_status.channel = dev->conf.channel;
+			rx_status.phymode = dev->conf.phymode;
+			rx_status.mactime = le64_to_cpu(entry->tsft);
+			rx_status.flag |= RX_FLAG_TSFT;
+			if (flags & RTL8180_RX_DESC_FLAG_CRC32_ERR)
+				rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
+
+			ieee80211_rx_irqsafe(dev, skb, &rx_status);
+
+			skb = new_skb;
+			priv->rx_buf[priv->rx_idx] = skb;
+			*((dma_addr_t *) skb->cb) =
+				pci_map_single(priv->pdev, skb_tail_pointer(skb),
+					       MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+		}
+
+	done:
+		entry->rx_buf = cpu_to_le32(*((dma_addr_t *)skb->cb));
+		entry->flags = cpu_to_le32(RTL8180_RX_DESC_FLAG_OWN |
+					   MAX_RX_SIZE);
+		if (priv->rx_idx == 31)
+			entry->flags |= cpu_to_le32(RTL8180_RX_DESC_FLAG_EOR);
+		priv->rx_idx = (priv->rx_idx + 1) % 32;
+	}
+}
+
+static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	struct rtl8180_tx_ring *ring = &priv->tx_ring[prio];
+
+	while (skb_queue_len(&ring->queue)) {
+		struct rtl8180_tx_desc *entry = &ring->desc[ring->idx];
+		struct sk_buff *skb;
+		struct ieee80211_tx_status status = { {0} };
+		struct ieee80211_tx_control *control;
+		u32 flags = le32_to_cpu(entry->flags);
+
+		if (flags & RTL8180_TX_DESC_FLAG_OWN)
+			return;
+
+		ring->idx = (ring->idx + 1) % ring->entries;
+		skb = __skb_dequeue(&ring->queue);
+		pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf),
+				 skb->len, PCI_DMA_TODEVICE);
+
+		control = *((struct ieee80211_tx_control **)skb->cb);
+		if (control)
+			memcpy(&status.control, control, sizeof(*control));
+		kfree(control);
+
+		if (!(status.control.flags & IEEE80211_TXCTL_NO_ACK)) {
+			if (flags & RTL8180_TX_DESC_FLAG_TX_OK)
+				status.flags = IEEE80211_TX_STATUS_ACK;
+			else
+				status.excessive_retries = 1;
+		}
+		status.retry_count = flags & 0xFF;
+
+		ieee80211_tx_status_irqsafe(dev, skb, &status);
+		if (ring->entries - skb_queue_len(&ring->queue) == 2)
+			ieee80211_wake_queue(dev, prio);
+	}
+}
+
+static irqreturn_t rtl8180_interrupt(int irq, void *dev_id)
+{
+	struct ieee80211_hw *dev = dev_id;
+	struct rtl8180_priv *priv = dev->priv;
+	u16 reg;
+
+	spin_lock(&priv->lock);
+	reg = rtl818x_ioread16(priv, &priv->map->INT_STATUS);
+	if (unlikely(reg == 0xFFFF)) {
+		spin_unlock(&priv->lock);
+		return IRQ_HANDLED;
+	}
+
+	rtl818x_iowrite16(priv, &priv->map->INT_STATUS, reg);
+
+	if (reg & (RTL818X_INT_TXB_OK | RTL818X_INT_TXB_ERR))
+		rtl8180_handle_tx(dev, 3);
+
+	if (reg & (RTL818X_INT_TXH_OK | RTL818X_INT_TXH_ERR))
+		rtl8180_handle_tx(dev, 2);
+
+	if (reg & (RTL818X_INT_TXN_OK | RTL818X_INT_TXN_ERR))
+		rtl8180_handle_tx(dev, 1);
+
+	if (reg & (RTL818X_INT_TXL_OK | RTL818X_INT_TXL_ERR))
+		rtl8180_handle_tx(dev, 0);
+
+	if (reg & (RTL818X_INT_RX_OK | RTL818X_INT_RX_ERR))
+		rtl8180_handle_rx(dev);
+
+	spin_unlock(&priv->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb,
+		      struct ieee80211_tx_control *control)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	struct rtl8180_tx_ring *ring;
+	struct rtl8180_tx_desc *entry;
+	unsigned long flags;
+	unsigned int idx, prio;
+	dma_addr_t mapping;
+	u32 tx_flags;
+	u16 plcp_len = 0;
+	__le16 rts_duration = 0;
+
+	prio = control->queue;
+	ring = &priv->tx_ring[prio];
+
+	mapping = pci_map_single(priv->pdev, skb->data,
+				 skb->len, PCI_DMA_TODEVICE);
+
+	tx_flags = RTL8180_TX_DESC_FLAG_OWN | RTL8180_TX_DESC_FLAG_FS |
+		   RTL8180_TX_DESC_FLAG_LS | (control->tx_rate << 24) |
+		   (control->rts_cts_rate << 19) | skb->len;
+
+	if (priv->r8185)
+		tx_flags |= RTL8180_TX_DESC_FLAG_DMA |
+			    RTL8180_TX_DESC_FLAG_NO_ENC;
+
+	if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS)
+		tx_flags |= RTL8180_TX_DESC_FLAG_RTS;
+	else if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT)
+		tx_flags |= RTL8180_TX_DESC_FLAG_CTS;
+
+	*((struct ieee80211_tx_control **) skb->cb) =
+		kmemdup(control, sizeof(*control), GFP_ATOMIC);
+
+	if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS)
+		rts_duration = ieee80211_rts_duration(dev, priv->if_id, skb->len, control);
+
+	if (!priv->r8185) {
+		unsigned int remainder;
+
+		plcp_len = DIV_ROUND_UP(16 * (skb->len + 4),
+					(control->rate->rate * 2) / 10);
+		remainder = (16 * (skb->len + 4)) %
+			    ((control->rate->rate * 2) / 10);
+		if (remainder > 0 && remainder <= 6)
+			plcp_len |= 1 << 15;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+	idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries;
+	entry = &ring->desc[idx];
+
+	entry->rts_duration = rts_duration;
+	entry->plcp_len = cpu_to_le16(plcp_len);
+	entry->tx_buf = cpu_to_le32(mapping);
+	entry->frame_len = cpu_to_le32(skb->len);
+	entry->flags2 = control->alt_retry_rate != -1 ?
+			control->alt_retry_rate << 4 : 0;
+	entry->retry_limit = control->retry_limit;
+	entry->flags = cpu_to_le32(tx_flags);
+	__skb_queue_tail(&ring->queue, skb);
+	if (ring->entries - skb_queue_len(&ring->queue) < 2)
+		ieee80211_stop_queue(dev, control->queue);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, (1 << (prio + 4)));
+
+	return 0;
+}
+
+void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam)
+{
+	u8 reg;
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+		 reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite32(priv, &priv->map->ANAPARAM, anaparam);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+		 reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+}
+
+static int rtl8180_init_hw(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u16 reg;
+
+	rtl818x_iowrite8(priv, &priv->map->CMD, 0);
+	rtl818x_ioread8(priv, &priv->map->CMD);
+	msleep(10);
+
+	/* reset */
+	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
+	rtl818x_ioread8(priv, &priv->map->CMD);
+
+	reg = rtl818x_ioread8(priv, &priv->map->CMD);
+	reg &= (1 << 1);
+	reg |= RTL818X_CMD_RESET;
+	rtl818x_iowrite8(priv, &priv->map->CMD, RTL818X_CMD_RESET);
+	rtl818x_ioread8(priv, &priv->map->CMD);
+	msleep(200);
+
+	/* check success of reset */
+	if (rtl818x_ioread8(priv, &priv->map->CMD) & RTL818X_CMD_RESET) {
+		printk(KERN_ERR "%s: reset timeout!\n", wiphy_name(dev->wiphy));
+		return -ETIMEDOUT;
+	}
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD);
+	rtl818x_ioread8(priv, &priv->map->CMD);
+	msleep(200);
+
+	if (rtl818x_ioread8(priv, &priv->map->CONFIG3) & (1 << 3)) {
+		/* For cardbus */
+		reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+		reg |= 1 << 1;
+		rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
+		reg = rtl818x_ioread16(priv, &priv->map->FEMR);
+		reg |= (1 << 15) | (1 << 14) | (1 << 4);
+		rtl818x_iowrite16(priv, &priv->map->FEMR, reg);
+	}
+
+	rtl818x_iowrite8(priv, &priv->map->MSR, 0);
+
+	if (!priv->r8185)
+		rtl8180_set_anaparam(priv, priv->anaparam);
+
+	rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma);
+	rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[3].dma);
+	rtl818x_iowrite32(priv, &priv->map->THPDA, priv->tx_ring[2].dma);
+	rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma);
+	rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma);
+
+	/* TODO: necessary? specs indicate not */
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG2);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg & ~(1 << 3));
+	if (priv->r8185) {
+		reg = rtl818x_ioread8(priv, &priv->map->CONFIG2);
+		rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg | (1 << 4));
+	}
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+	/* TODO: set CONFIG5 for calibrating AGC on rtl8180 + philips radio? */
+
+	/* TODO: turn off hw wep on rtl8180 */
+
+	rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
+
+	if (priv->r8185) {
+		rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
+		rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81);
+		rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0);
+
+		rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
+
+		/* TODO: set ClkRun enable? necessary? */
+		reg = rtl818x_ioread8(priv, &priv->map->GP_ENABLE);
+		rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, reg & ~(1 << 6));
+		rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+		reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+		rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | (1 << 2));
+		rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+	} else {
+		rtl818x_iowrite16(priv, &priv->map->BRSR, 0x1);
+		rtl818x_iowrite8(priv, &priv->map->SECURITY, 0);
+
+		rtl818x_iowrite8(priv, &priv->map->PHY_DELAY, 0x6);
+		rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, 0x4C);
+	}
+
+	priv->rf->init(dev);
+	if (priv->r8185)
+		rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
+	return 0;
+}
+
+static int rtl8180_init_rx_ring(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	struct rtl8180_rx_desc *entry;
+	int i;
+
+	priv->rx_ring = pci_alloc_consistent(priv->pdev,
+					     sizeof(*priv->rx_ring) * 32,
+					     &priv->rx_ring_dma);
+
+	if (!priv->rx_ring || (unsigned long)priv->rx_ring & 0xFF) {
+		printk(KERN_ERR "%s: Cannot allocate RX ring\n",
+		       wiphy_name(dev->wiphy));
+		return -ENOMEM;
+	}
+
+	memset(priv->rx_ring, 0, sizeof(*priv->rx_ring) * 32);
+	priv->rx_idx = 0;
+
+	for (i = 0; i < 32; i++) {
+		struct sk_buff *skb = dev_alloc_skb(MAX_RX_SIZE);
+		dma_addr_t *mapping;
+		entry = &priv->rx_ring[i];
+		if (!skb)
+			return 0;
+
+		priv->rx_buf[i] = skb;
+		mapping = (dma_addr_t *)skb->cb;
+		*mapping = pci_map_single(priv->pdev, skb_tail_pointer(skb),
+					  MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+		entry->rx_buf = cpu_to_le32(*mapping);
+		entry->flags = cpu_to_le32(RTL8180_RX_DESC_FLAG_OWN |
+					   MAX_RX_SIZE);
+	}
+	entry->flags |= cpu_to_le32(RTL8180_RX_DESC_FLAG_EOR);
+	return 0;
+}
+
+static void rtl8180_free_rx_ring(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	int i;
+
+	for (i = 0; i < 32; i++) {
+		struct sk_buff *skb = priv->rx_buf[i];
+		if (!skb)
+			continue;
+
+		pci_unmap_single(priv->pdev,
+				 *((dma_addr_t *)skb->cb),
+				 MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+		kfree_skb(skb);
+	}
+
+	pci_free_consistent(priv->pdev, sizeof(*priv->rx_ring) * 32,
+			    priv->rx_ring, priv->rx_ring_dma);
+	priv->rx_ring = NULL;
+}
+
+static int rtl8180_init_tx_ring(struct ieee80211_hw *dev,
+				unsigned int prio, unsigned int entries)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	struct rtl8180_tx_desc *ring;
+	dma_addr_t dma;
+	int i;
+
+	ring = pci_alloc_consistent(priv->pdev, sizeof(*ring) * entries, &dma);
+	if (!ring || (unsigned long)ring & 0xFF) {
+		printk(KERN_ERR "%s: Cannot allocate TX ring (prio = %d)\n",
+		       wiphy_name(dev->wiphy), prio);
+		return -ENOMEM;
+	}
+
+	memset(ring, 0, sizeof(*ring)*entries);
+	priv->tx_ring[prio].desc = ring;
+	priv->tx_ring[prio].dma = dma;
+	priv->tx_ring[prio].idx = 0;
+	priv->tx_ring[prio].entries = entries;
+	skb_queue_head_init(&priv->tx_ring[prio].queue);
+
+	for (i = 0; i < entries; i++)
+		ring[i].next_tx_desc =
+			cpu_to_le32((u32)dma + ((i + 1) % entries) * sizeof(*ring));
+
+	return 0;
+}
+
+static void rtl8180_free_tx_ring(struct ieee80211_hw *dev, unsigned int prio)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	struct rtl8180_tx_ring *ring = &priv->tx_ring[prio];
+
+	while (skb_queue_len(&ring->queue)) {
+		struct rtl8180_tx_desc *entry = &ring->desc[ring->idx];
+		struct sk_buff *skb = __skb_dequeue(&ring->queue);
+
+		pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf),
+				 skb->len, PCI_DMA_TODEVICE);
+		kfree(*((struct ieee80211_tx_control **) skb->cb));
+		kfree_skb(skb);
+		ring->idx = (ring->idx + 1) % ring->entries;
+	}
+
+	pci_free_consistent(priv->pdev, sizeof(*ring->desc)*ring->entries,
+			    ring->desc, ring->dma);
+	ring->desc = NULL;
+}
+
+static int rtl8180_start(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	int ret, i;
+	u32 reg;
+
+	ret = rtl8180_init_rx_ring(dev);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < 4; i++)
+		if ((ret = rtl8180_init_tx_ring(dev, i, 16)))
+			goto err_free_rings;
+
+	ret = rtl8180_init_hw(dev);
+	if (ret)
+		goto err_free_rings;
+
+	rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma);
+	rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[3].dma);
+	rtl818x_iowrite32(priv, &priv->map->THPDA, priv->tx_ring[2].dma);
+	rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma);
+	rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma);
+
+	ret = request_irq(priv->pdev->irq, &rtl8180_interrupt,
+			  IRQF_SHARED, KBUILD_MODNAME, dev);
+	if (ret) {
+		printk(KERN_ERR "%s: failed to register IRQ handler\n",
+		       wiphy_name(dev->wiphy));
+		goto err_free_rings;
+	}
+
+	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
+
+	rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0);
+	rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0);
+
+	reg = RTL818X_RX_CONF_ONLYERLPKT |
+	      RTL818X_RX_CONF_RX_AUTORESETPHY |
+	      RTL818X_RX_CONF_MGMT |
+	      RTL818X_RX_CONF_DATA |
+	      (7 << 8 /* MAX RX DMA */) |
+	      RTL818X_RX_CONF_BROADCAST |
+	      RTL818X_RX_CONF_NICMAC;
+
+	if (priv->r8185)
+		reg |= RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2;
+	else {
+		reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE1)
+			? RTL818X_RX_CONF_CSDM1 : 0;
+		reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE2)
+			? RTL818X_RX_CONF_CSDM2 : 0;
+	}
+
+	priv->rx_conf = reg;
+	rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
+
+	if (priv->r8185) {
+		reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
+		reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT;
+		reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
+		rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
+
+		reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
+		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
+		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
+		reg |=  RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
+		rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
+
+		/* disable early TX */
+		rtl818x_iowrite8(priv, (u8 __iomem *)priv->map + 0xec, 0x3f);
+	}
+
+	reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
+	reg |= (6 << 21 /* MAX TX DMA */) |
+	       RTL818X_TX_CONF_NO_ICV;
+
+	if (priv->r8185)
+		reg &= ~RTL818X_TX_CONF_PROBE_DTS;
+	else
+		reg &= ~RTL818X_TX_CONF_HW_SEQNUM;
+
+	/* different meaning, same value on both rtl8185 and rtl8180 */
+	reg &= ~RTL818X_TX_CONF_SAT_HWPLCP;
+
+	rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
+
+	reg = rtl818x_ioread8(priv, &priv->map->CMD);
+	reg |= RTL818X_CMD_RX_ENABLE;
+	reg |= RTL818X_CMD_TX_ENABLE;
+	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
+
+	priv->mode = IEEE80211_IF_TYPE_MNTR;
+	return 0;
+
+ err_free_rings:
+	rtl8180_free_rx_ring(dev);
+	for (i = 0; i < 4; i++)
+		if (priv->tx_ring[i].desc)
+			rtl8180_free_tx_ring(dev, i);
+
+	return ret;
+}
+
+static void rtl8180_stop(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u8 reg;
+	int i;
+
+	priv->mode = IEEE80211_IF_TYPE_INVALID;
+
+	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
+
+	reg = rtl818x_ioread8(priv, &priv->map->CMD);
+	reg &= ~RTL818X_CMD_TX_ENABLE;
+	reg &= ~RTL818X_CMD_RX_ENABLE;
+	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
+
+	priv->rf->stop(dev);
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG4);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+	free_irq(priv->pdev->irq, dev);
+
+	rtl8180_free_rx_ring(dev);
+	for (i = 0; i < 4; i++)
+		rtl8180_free_tx_ring(dev, i);
+}
+
+static int rtl8180_add_interface(struct ieee80211_hw *dev,
+				 struct ieee80211_if_init_conf *conf)
+{
+	struct rtl8180_priv *priv = dev->priv;
+
+	if (priv->mode != IEEE80211_IF_TYPE_MNTR)
+		return -EOPNOTSUPP;
+
+	switch (conf->type) {
+	case IEEE80211_IF_TYPE_STA:
+		priv->mode = conf->type;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->MAC[0],
+			  cpu_to_le32(*(u32 *)conf->mac_addr));
+	rtl818x_iowrite16(priv, (__le16 __iomem *)&priv->map->MAC[4],
+			  cpu_to_le16(*(u16 *)(conf->mac_addr + 4)));
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+	return 0;
+}
+
+static void rtl8180_remove_interface(struct ieee80211_hw *dev,
+				     struct ieee80211_if_init_conf *conf)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	priv->mode = IEEE80211_IF_TYPE_MNTR;
+}
+
+static int rtl8180_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
+{
+	struct rtl8180_priv *priv = dev->priv;
+
+	priv->rf->set_chan(dev, conf);
+
+	return 0;
+}
+
+static int rtl8180_config_interface(struct ieee80211_hw *dev, int if_id,
+				    struct ieee80211_if_conf *conf)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	int i;
+
+	priv->if_id = if_id;
+
+	for (i = 0; i < ETH_ALEN; i++)
+		rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]);
+
+	if (is_valid_ether_addr(conf->bssid))
+		rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_INFRA);
+	else
+		rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_NO_LINK);
+
+	return 0;
+}
+
+static void rtl8180_configure_filter(struct ieee80211_hw *dev,
+				     unsigned int changed_flags,
+				     unsigned int *total_flags,
+				     int mc_count, struct dev_addr_list *mclist)
+{
+	struct rtl8180_priv *priv = dev->priv;
+
+	if (changed_flags & FIF_FCSFAIL)
+		priv->rx_conf ^= RTL818X_RX_CONF_FCS;
+	if (changed_flags & FIF_CONTROL)
+		priv->rx_conf ^= RTL818X_RX_CONF_CTRL;
+	if (changed_flags & FIF_OTHER_BSS)
+		priv->rx_conf ^= RTL818X_RX_CONF_MONITOR;
+	if (*total_flags & FIF_ALLMULTI || mc_count > 0)
+		priv->rx_conf |= RTL818X_RX_CONF_MULTICAST;
+	else
+		priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST;
+
+	*total_flags = 0;
+
+	if (priv->rx_conf & RTL818X_RX_CONF_FCS)
+		*total_flags |= FIF_FCSFAIL;
+	if (priv->rx_conf & RTL818X_RX_CONF_CTRL)
+		*total_flags |= FIF_CONTROL;
+	if (priv->rx_conf & RTL818X_RX_CONF_MONITOR)
+		*total_flags |= FIF_OTHER_BSS;
+	if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST)
+		*total_flags |= FIF_ALLMULTI;
+
+	rtl818x_iowrite32(priv, &priv->map->RX_CONF, priv->rx_conf);
+}
+
+static const struct ieee80211_ops rtl8180_ops = {
+	.tx			= rtl8180_tx,
+	.start			= rtl8180_start,
+	.stop			= rtl8180_stop,
+	.add_interface		= rtl8180_add_interface,
+	.remove_interface	= rtl8180_remove_interface,
+	.config			= rtl8180_config,
+	.config_interface	= rtl8180_config_interface,
+	.configure_filter	= rtl8180_configure_filter,
+};
+
+static void rtl8180_eeprom_register_read(struct eeprom_93cx6 *eeprom)
+{
+	struct ieee80211_hw *dev = eeprom->data;
+	struct rtl8180_priv *priv = dev->priv;
+	u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+
+	eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
+	eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ;
+	eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK;
+	eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS;
+}
+
+static void rtl8180_eeprom_register_write(struct eeprom_93cx6 *eeprom)
+{
+	struct ieee80211_hw *dev = eeprom->data;
+	struct rtl8180_priv *priv = dev->priv;
+	u8 reg = 2 << 6;
+
+	if (eeprom->reg_data_in)
+		reg |= RTL818X_EEPROM_CMD_WRITE;
+	if (eeprom->reg_data_out)
+		reg |= RTL818X_EEPROM_CMD_READ;
+	if (eeprom->reg_data_clock)
+		reg |= RTL818X_EEPROM_CMD_CK;
+	if (eeprom->reg_chip_select)
+		reg |= RTL818X_EEPROM_CMD_CS;
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg);
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(10);
+}
+
+static int __devinit rtl8180_probe(struct pci_dev *pdev,
+				   const struct pci_device_id *id)
+{
+	struct ieee80211_hw *dev;
+	struct rtl8180_priv *priv;
+	unsigned long mem_addr, mem_len;
+	unsigned int io_addr, io_len;
+	int err, i;
+	struct eeprom_93cx6 eeprom;
+	const char *chip_name, *rf_name = NULL;
+	u32 reg;
+	u16 eeprom_val;
+	DECLARE_MAC_BUF(mac);
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		printk(KERN_ERR "%s (rtl8180): Cannot enable new PCI device\n",
+		       pci_name(pdev));
+		return err;
+	}
+
+	err = pci_request_regions(pdev, KBUILD_MODNAME);
+	if (err) {
+		printk(KERN_ERR "%s (rtl8180): Cannot obtain PCI resources\n",
+		       pci_name(pdev));
+		return err;
+	}
+
+	io_addr = pci_resource_start(pdev, 0);
+	io_len = pci_resource_len(pdev, 0);
+	mem_addr = pci_resource_start(pdev, 1);
+	mem_len = pci_resource_len(pdev, 1);
+
+	if (mem_len < sizeof(struct rtl818x_csr) ||
+	    io_len < sizeof(struct rtl818x_csr)) {
+		printk(KERN_ERR "%s (rtl8180): Too short PCI resources\n",
+		       pci_name(pdev));
+		err = -ENOMEM;
+		goto err_free_reg;
+	}
+
+	if ((err = pci_set_dma_mask(pdev, 0xFFFFFF00ULL)) ||
+	    (err = pci_set_consistent_dma_mask(pdev, 0xFFFFFF00ULL))) {
+		printk(KERN_ERR "%s (rtl8180): No suitable DMA available\n",
+		       pci_name(pdev));
+		goto err_free_reg;
+	}
+
+	pci_set_master(pdev);
+
+	dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8180_ops);
+	if (!dev) {
+		printk(KERN_ERR "%s (rtl8180): ieee80211 alloc failed\n",
+		       pci_name(pdev));
+		err = -ENOMEM;
+		goto err_free_reg;
+	}
+
+	priv = dev->priv;
+	priv->pdev = pdev;
+
+	SET_IEEE80211_DEV(dev, &pdev->dev);
+	pci_set_drvdata(pdev, dev);
+
+	priv->map = pci_iomap(pdev, 1, mem_len);
+	if (!priv->map)
+		priv->map = pci_iomap(pdev, 0, io_len);
+
+	if (!priv->map) {
+		printk(KERN_ERR "%s (rtl8180): Cannot map device memory\n",
+		       pci_name(pdev));
+		goto err_free_dev;
+	}
+
+	memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels));
+	memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates));
+	priv->modes[0].mode = MODE_IEEE80211G;
+	priv->modes[0].num_rates = ARRAY_SIZE(rtl818x_rates);
+	priv->modes[0].rates = priv->rates;
+	priv->modes[0].num_channels = ARRAY_SIZE(rtl818x_channels);
+	priv->modes[0].channels = priv->channels;
+	priv->modes[1].mode = MODE_IEEE80211B;
+	priv->modes[1].num_rates = 4;
+	priv->modes[1].rates = priv->rates;
+	priv->modes[1].num_channels = ARRAY_SIZE(rtl818x_channels);
+	priv->modes[1].channels = priv->channels;
+	priv->mode = IEEE80211_IF_TYPE_INVALID;
+	dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+		     IEEE80211_HW_RX_INCLUDES_FCS;
+	dev->queues = 1;
+	dev->max_rssi = 65;
+
+	reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
+	reg &= RTL818X_TX_CONF_HWVER_MASK;
+	switch (reg) {
+	case RTL818X_TX_CONF_R8180_ABCD:
+		chip_name = "RTL8180";
+		break;
+	case RTL818X_TX_CONF_R8180_F:
+		chip_name = "RTL8180vF";
+		break;
+	case RTL818X_TX_CONF_R8185_ABC:
+		chip_name = "RTL8185";
+		break;
+	case RTL818X_TX_CONF_R8185_D:
+		chip_name = "RTL8185vD";
+		break;
+	default:
+		printk(KERN_ERR "%s (rtl8180): Unknown chip! (0x%x)\n",
+		       pci_name(pdev), reg >> 25);
+		goto err_iounmap;
+	}
+
+	priv->r8185 = reg & RTL818X_TX_CONF_R8185_ABC;
+	if (priv->r8185) {
+		if ((err = ieee80211_register_hwmode(dev, &priv->modes[0])))
+			goto err_iounmap;
+
+		pci_try_set_mwi(pdev);
+	}
+
+	if ((err = ieee80211_register_hwmode(dev, &priv->modes[1])))
+		goto err_iounmap;
+
+	eeprom.data = dev;
+	eeprom.register_read = rtl8180_eeprom_register_read;
+	eeprom.register_write = rtl8180_eeprom_register_write;
+	if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6))
+		eeprom.width = PCI_EEPROM_WIDTH_93C66;
+	else
+		eeprom.width = PCI_EEPROM_WIDTH_93C46;
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_PROGRAM);
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(10);
+
+	eeprom_93cx6_read(&eeprom, 0x06, &eeprom_val);
+	eeprom_val &= 0xFF;
+	switch (eeprom_val) {
+	case 1:	rf_name = "Intersil";
+		break;
+	case 2:	rf_name = "RFMD";
+		break;
+	case 3:	priv->rf = &sa2400_rf_ops;
+		break;
+	case 4:	priv->rf = &max2820_rf_ops;
+		break;
+	case 5:	priv->rf = &grf5101_rf_ops;
+		break;
+	case 9:	priv->rf = rtl8180_detect_rf(dev);
+		break;
+	case 10:
+		rf_name = "RTL8255";
+		break;
+	default:
+		printk(KERN_ERR "%s (rtl8180): Unknown RF! (0x%x)\n",
+		       pci_name(pdev), eeprom_val);
+		goto err_iounmap;
+	}
+
+	if (!priv->rf) {
+		printk(KERN_ERR "%s (rtl8180): %s RF frontend not supported!\n",
+		       pci_name(pdev), rf_name);
+		goto err_iounmap;
+	}
+
+	eeprom_93cx6_read(&eeprom, 0x17, &eeprom_val);
+	priv->csthreshold = eeprom_val >> 8;
+	if (!priv->r8185) {
+		__le32 anaparam;
+		eeprom_93cx6_multiread(&eeprom, 0xD, (__le16 *)&anaparam, 2);
+		priv->anaparam = le32_to_cpu(anaparam);
+		eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam);
+	}
+
+	eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)dev->wiphy->perm_addr, 3);
+	if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
+		printk(KERN_WARNING "%s (rtl8180): Invalid hwaddr! Using"
+		       " randomly generated MAC addr\n", pci_name(pdev));
+		random_ether_addr(dev->wiphy->perm_addr);
+	}
+
+	/* CCK TX power */
+	for (i = 0; i < 14; i += 2) {
+		u16 txpwr;
+		eeprom_93cx6_read(&eeprom, 0x10 + (i >> 1), &txpwr);
+		priv->channels[i].val = txpwr & 0xFF;
+		priv->channels[i + 1].val = txpwr >> 8;
+	}
+
+	/* OFDM TX power */
+	if (priv->r8185) {
+		for (i = 0; i < 14; i += 2) {
+			u16 txpwr;
+			eeprom_93cx6_read(&eeprom, 0x20 + (i >> 1), &txpwr);
+			priv->channels[i].val |= (txpwr & 0xFF) << 8;
+			priv->channels[i + 1].val |= txpwr & 0xFF00;
+		}
+	}
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+	spin_lock_init(&priv->lock);
+
+	err = ieee80211_register_hw(dev);
+	if (err) {
+		printk(KERN_ERR "%s (rtl8180): Cannot register device\n",
+		       pci_name(pdev));
+		goto err_iounmap;
+	}
+
+	printk(KERN_INFO "%s: hwaddr %s, %s + %s\n",
+	       wiphy_name(dev->wiphy), print_mac(mac, dev->wiphy->perm_addr),
+	       chip_name, priv->rf->name);
+
+	return 0;
+
+ err_iounmap:
+	iounmap(priv->map);
+
+ err_free_dev:
+	pci_set_drvdata(pdev, NULL);
+	ieee80211_free_hw(dev);
+
+ err_free_reg:
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	return err;
+}
+
+static void __devexit rtl8180_remove(struct pci_dev *pdev)
+{
+	struct ieee80211_hw *dev = pci_get_drvdata(pdev);
+	struct rtl8180_priv *priv;
+
+	if (!dev)
+		return;
+
+	ieee80211_unregister_hw(dev);
+
+	priv = dev->priv;
+
+	pci_iounmap(pdev, priv->map);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	ieee80211_free_hw(dev);
+}
+
+#ifdef CONFIG_PM
+static int rtl8180_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	pci_save_state(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+	return 0;
+}
+
+static int rtl8180_resume(struct pci_dev *pdev)
+{
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
+static struct pci_driver rtl8180_driver = {
+	.name		= KBUILD_MODNAME,
+	.id_table	= rtl8180_table,
+	.probe		= rtl8180_probe,
+	.remove		= __devexit_p(rtl8180_remove),
+#ifdef CONFIG_PM
+	.suspend	= rtl8180_suspend,
+	.resume		= rtl8180_resume,
+#endif /* CONFIG_PM */
+};
+
+static int __init rtl8180_init(void)
+{
+	return pci_register_driver(&rtl8180_driver);
+}
+
+static void __exit rtl8180_exit(void)
+{
+	pci_unregister_driver(&rtl8180_driver);
+}
+
+module_init(rtl8180_init);
+module_exit(rtl8180_exit);
diff --git a/drivers/net/wireless/rtl8180_grf5101.c b/drivers/net/wireless/rtl8180_grf5101.c
new file mode 100644
index 000000000000..8293e19c4c59
--- /dev/null
+++ b/drivers/net/wireless/rtl8180_grf5101.c
@@ -0,0 +1,179 @@
+
+/*
+ * Radio tuning for GCT GRF5101 on RTL8180
+ *
+ * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
+ *
+ * Code from the BSD driver and the rtl8181 project have been
+ * very useful to understand certain things
+ *
+ * I want to thanks the Authors of such projects and the Ndiswrapper
+ * project Authors.
+ *
+ * A special Big Thanks also is for all people who donated me cards,
+ * making possible the creation of the original rtl8180 driver
+ * from which this code is derived!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <net/mac80211.h>
+
+#include "rtl8180.h"
+#include "rtl8180_grf5101.h"
+
+static const int grf5101_encode[] = {
+	0x0, 0x8, 0x4, 0xC,
+	0x2, 0xA, 0x6, 0xE,
+	0x1, 0x9, 0x5, 0xD,
+	0x3, 0xB, 0x7, 0xF
+};
+
+static void write_grf5101(struct ieee80211_hw *dev, u8 addr, u32 data)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u32 phy_config;
+
+	phy_config =  grf5101_encode[(data >> 8) & 0xF];
+	phy_config |= grf5101_encode[(data >> 4) & 0xF] << 4;
+	phy_config |= grf5101_encode[data & 0xF] << 8;
+	phy_config |= grf5101_encode[(addr >> 1) & 0xF] << 12;
+	phy_config |= (addr & 1) << 16;
+	phy_config |= grf5101_encode[(data & 0xf000) >> 12] << 24;
+
+	/* MAC will bang bits to the chip */
+	phy_config |= 0x90000000;
+
+	rtl818x_iowrite32(priv,
+		(__le32 __iomem *) &priv->map->RFPinsOutput, phy_config);
+
+	msleep(3);
+}
+
+static void grf5101_write_phy_antenna(struct ieee80211_hw *dev, short chan)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u8 ant = GRF5101_ANTENNA;
+
+	if (priv->rfparam & RF_PARAM_ANTBDEFAULT)
+		ant |= BB_ANTENNA_B;
+
+	if (chan == 14)
+		ant |= BB_ANTATTEN_CHAN14;
+
+	rtl8180_write_phy(dev, 0x10, ant);
+}
+
+static void grf5101_rf_set_channel(struct ieee80211_hw *dev,
+				   struct ieee80211_conf *conf)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u32 txpw = priv->channels[conf->channel - 1].val & 0xFF;
+	u32 chan = conf->channel - 1;
+
+	/* set TX power */
+	write_grf5101(dev, 0x15, 0x0);
+	write_grf5101(dev, 0x06, txpw);
+	write_grf5101(dev, 0x15, 0x10);
+	write_grf5101(dev, 0x15, 0x0);
+
+	/* set frequency */
+	write_grf5101(dev, 0x07, 0x0);
+	write_grf5101(dev, 0x0B, chan);
+	write_grf5101(dev, 0x07, 0x1000);
+
+	grf5101_write_phy_antenna(dev, chan);
+}
+
+static void grf5101_rf_stop(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u32 anaparam;
+
+	anaparam = priv->anaparam;
+	anaparam &= 0x000fffff;
+	anaparam |= 0x3f900000;
+	rtl8180_set_anaparam(priv, anaparam);
+
+	write_grf5101(dev, 0x07, 0x0);
+	write_grf5101(dev, 0x1f, 0x45);
+	write_grf5101(dev, 0x1f, 0x5);
+	write_grf5101(dev, 0x00, 0x8e4);
+}
+
+static void grf5101_rf_init(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+
+	rtl8180_set_anaparam(priv, priv->anaparam);
+
+	write_grf5101(dev, 0x1f, 0x0);
+	write_grf5101(dev, 0x1f, 0x0);
+	write_grf5101(dev, 0x1f, 0x40);
+	write_grf5101(dev, 0x1f, 0x60);
+	write_grf5101(dev, 0x1f, 0x61);
+	write_grf5101(dev, 0x1f, 0x61);
+	write_grf5101(dev, 0x00, 0xae4);
+	write_grf5101(dev, 0x1f, 0x1);
+	write_grf5101(dev, 0x1f, 0x41);
+	write_grf5101(dev, 0x1f, 0x61);
+
+	write_grf5101(dev, 0x01, 0x1a23);
+	write_grf5101(dev, 0x02, 0x4971);
+	write_grf5101(dev, 0x03, 0x41de);
+	write_grf5101(dev, 0x04, 0x2d80);
+	write_grf5101(dev, 0x05, 0x68ff);	/* 0x61ff original value */
+	write_grf5101(dev, 0x06, 0x0);
+	write_grf5101(dev, 0x07, 0x0);
+	write_grf5101(dev, 0x08, 0x7533);
+	write_grf5101(dev, 0x09, 0xc401);
+	write_grf5101(dev, 0x0a, 0x0);
+	write_grf5101(dev, 0x0c, 0x1c7);
+	write_grf5101(dev, 0x0d, 0x29d3);
+	write_grf5101(dev, 0x0e, 0x2e8);
+	write_grf5101(dev, 0x10, 0x192);
+	write_grf5101(dev, 0x11, 0x248);
+	write_grf5101(dev, 0x12, 0x0);
+	write_grf5101(dev, 0x13, 0x20c4);
+	write_grf5101(dev, 0x14, 0xf4fc);
+	write_grf5101(dev, 0x15, 0x0);
+	write_grf5101(dev, 0x16, 0x1500);
+
+	write_grf5101(dev, 0x07, 0x1000);
+
+	/* baseband configuration */
+	rtl8180_write_phy(dev, 0, 0xa8);
+	rtl8180_write_phy(dev, 3, 0x0);
+	rtl8180_write_phy(dev, 4, 0xc0);
+	rtl8180_write_phy(dev, 5, 0x90);
+	rtl8180_write_phy(dev, 6, 0x1e);
+	rtl8180_write_phy(dev, 7, 0x64);
+
+	grf5101_write_phy_antenna(dev, 1);
+
+	rtl8180_write_phy(dev, 0x11, 0x88);
+
+	if (rtl818x_ioread8(priv, &priv->map->CONFIG2) &
+	    RTL818X_CONFIG2_ANTENNA_DIV)
+		rtl8180_write_phy(dev, 0x12, 0xc0); /* enable ant diversity */
+	else
+		rtl8180_write_phy(dev, 0x12, 0x40); /* disable ant diversity */
+
+	rtl8180_write_phy(dev, 0x13, 0x90 | priv->csthreshold);
+
+	rtl8180_write_phy(dev, 0x19, 0x0);
+	rtl8180_write_phy(dev, 0x1a, 0xa0);
+	rtl8180_write_phy(dev, 0x1b, 0x44);
+}
+
+const struct rtl818x_rf_ops grf5101_rf_ops = {
+	.name		= "GCT",
+	.init		= grf5101_rf_init,
+	.stop		= grf5101_rf_stop,
+	.set_chan	= grf5101_rf_set_channel
+};
diff --git a/drivers/net/wireless/rtl8180_grf5101.h b/drivers/net/wireless/rtl8180_grf5101.h
new file mode 100644
index 000000000000..76647111bcff
--- /dev/null
+++ b/drivers/net/wireless/rtl8180_grf5101.h
@@ -0,0 +1,28 @@
+#ifndef RTL8180_GRF5101_H
+#define RTL8180_GRF5101_H
+
+/*
+ * Radio tuning for GCT GRF5101 on RTL8180
+ *
+ * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
+ *
+ * Code from the BSD driver and the rtl8181 project have been
+ * very useful to understand certain things
+ *
+ * I want to thanks the Authors of such projects and the Ndiswrapper
+ * project Authors.
+ *
+ * A special Big Thanks also is for all people who donated me cards,
+ * making possible the creation of the original rtl8180 driver
+ * from which this code is derived!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define GRF5101_ANTENNA 0xA3
+
+extern const struct rtl818x_rf_ops grf5101_rf_ops;
+
+#endif /* RTL8180_GRF5101_H */
diff --git a/drivers/net/wireless/rtl8180_max2820.c b/drivers/net/wireless/rtl8180_max2820.c
new file mode 100644
index 000000000000..98fe9fd64968
--- /dev/null
+++ b/drivers/net/wireless/rtl8180_max2820.c
@@ -0,0 +1,150 @@
+/*
+ * Radio tuning for Maxim max2820 on RTL8180
+ *
+ * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
+ *
+ * Code from the BSD driver and the rtl8181 project have been
+ * very useful to understand certain things
+ *
+ * I want to thanks the Authors of such projects and the Ndiswrapper
+ * project Authors.
+ *
+ * A special Big Thanks also is for all people who donated me cards,
+ * making possible the creation of the original rtl8180 driver
+ * from which this code is derived!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <net/mac80211.h>
+
+#include "rtl8180.h"
+#include "rtl8180_max2820.h"
+
+static const u32 max2820_chan[] = {
+	12, /* CH 1 */
+	17,
+	22,
+	27,
+	32,
+	37,
+	42,
+	47,
+	52,
+	57,
+	62,
+	67,
+	72,
+	84, /* CH 14 */
+};
+
+static void write_max2820(struct ieee80211_hw *dev, u8 addr, u32 data)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u32 phy_config;
+
+	phy_config = 0x90 + (data & 0xf);
+	phy_config <<= 16;
+	phy_config += addr;
+	phy_config <<= 8;
+	phy_config += (data >> 4) & 0xff;
+
+	rtl818x_iowrite32(priv,
+		(__le32 __iomem *) &priv->map->RFPinsOutput, phy_config);
+
+	msleep(1);
+}
+
+static void max2820_write_phy_antenna(struct ieee80211_hw *dev, short chan)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u8 ant;
+
+	ant = MAXIM_ANTENNA;
+	if (priv->rfparam & RF_PARAM_ANTBDEFAULT)
+		ant |= BB_ANTENNA_B;
+	if (chan == 14)
+		ant |= BB_ANTATTEN_CHAN14;
+
+	rtl8180_write_phy(dev, 0x10, ant);
+}
+
+static void max2820_rf_set_channel(struct ieee80211_hw *dev,
+				   struct ieee80211_conf *conf)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	unsigned int chan_idx = conf ? conf->channel - 1 : 0;
+	u32 txpw = priv->channels[chan_idx].val & 0xFF;
+	u32 chan = max2820_chan[chan_idx];
+
+	/* While philips SA2400 drive the PA bias from
+	 * sa2400, for MAXIM we do this directly from BB */
+	rtl8180_write_phy(dev, 3, txpw);
+
+	max2820_write_phy_antenna(dev, chan);
+	write_max2820(dev, 3, chan);
+}
+
+static void max2820_rf_stop(struct ieee80211_hw *dev)
+{
+	rtl8180_write_phy(dev, 3, 0x8);
+	write_max2820(dev, 1, 0);
+}
+
+
+static void max2820_rf_init(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+
+	/* MAXIM from netbsd driver */
+	write_max2820(dev, 0, 0x007); /* test mode as indicated in datasheet */
+	write_max2820(dev, 1, 0x01e); /* enable register */
+	write_max2820(dev, 2, 0x001); /* synt register */
+
+	max2820_rf_set_channel(dev, NULL);
+
+	write_max2820(dev, 4, 0x313); /* rx register */
+
+	/* PA is driven directly by the BB, we keep the MAXIM bias
+	 * at the highest value in case that setting it to lower
+	 * values may introduce some further attenuation somewhere..
+	 */
+	write_max2820(dev, 5, 0x00f);
+
+	/* baseband configuration */
+	rtl8180_write_phy(dev, 0, 0x88); /* sys1       */
+	rtl8180_write_phy(dev, 3, 0x08); /* txagc      */
+	rtl8180_write_phy(dev, 4, 0xf8); /* lnadet     */
+	rtl8180_write_phy(dev, 5, 0x90); /* ifagcinit  */
+	rtl8180_write_phy(dev, 6, 0x1a); /* ifagclimit */
+	rtl8180_write_phy(dev, 7, 0x64); /* ifagcdet   */
+
+	max2820_write_phy_antenna(dev, 1);
+
+	rtl8180_write_phy(dev, 0x11, 0x88); /* trl */
+
+	if (rtl818x_ioread8(priv, &priv->map->CONFIG2) &
+	    RTL818X_CONFIG2_ANTENNA_DIV)
+		rtl8180_write_phy(dev, 0x12, 0xc7);
+	else
+		rtl8180_write_phy(dev, 0x12, 0x47);
+
+	rtl8180_write_phy(dev, 0x13, 0x9b);
+
+	rtl8180_write_phy(dev, 0x19, 0x0);  /* CHESTLIM */
+	rtl8180_write_phy(dev, 0x1a, 0x9f); /* CHSQLIM  */
+
+	max2820_rf_set_channel(dev, NULL);
+}
+
+const struct rtl818x_rf_ops max2820_rf_ops = {
+	.name		= "Maxim",
+	.init		= max2820_rf_init,
+	.stop		= max2820_rf_stop,
+	.set_chan	= max2820_rf_set_channel
+};
diff --git a/drivers/net/wireless/rtl8180_max2820.h b/drivers/net/wireless/rtl8180_max2820.h
new file mode 100644
index 000000000000..61cf6d1e7d57
--- /dev/null
+++ b/drivers/net/wireless/rtl8180_max2820.h
@@ -0,0 +1,28 @@
+#ifndef RTL8180_MAX2820_H
+#define RTL8180_MAX2820_H
+
+/*
+ * Radio tuning for Maxim max2820 on RTL8180
+ *
+ * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
+ *
+ * Code from the BSD driver and the rtl8181 project have been
+ * very useful to understand certain things
+ *
+ * I want to thanks the Authors of such projects and the Ndiswrapper
+ * project Authors.
+ *
+ * A special Big Thanks also is for all people who donated me cards,
+ * making possible the creation of the original rtl8180 driver
+ * from which this code is derived!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define MAXIM_ANTENNA 0xb3
+
+extern const struct rtl818x_rf_ops max2820_rf_ops;
+
+#endif /* RTL8180_MAX2820_H */
diff --git a/drivers/net/wireless/rtl8180_rtl8225.c b/drivers/net/wireless/rtl8180_rtl8225.c
new file mode 100644
index 000000000000..ef3832bee85c
--- /dev/null
+++ b/drivers/net/wireless/rtl8180_rtl8225.c
@@ -0,0 +1,779 @@
+
+/*
+ * Radio tuning for RTL8225 on RTL8180
+ *
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
+ *
+ * Based on the r8180 driver, which is:
+ * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
+ *
+ * Thanks to Realtek for their support!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <net/mac80211.h>
+
+#include "rtl8180.h"
+#include "rtl8180_rtl8225.h"
+
+static void rtl8225_write(struct ieee80211_hw *dev, u8 addr, u16 data)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u16 reg80, reg84, reg82;
+	u32 bangdata;
+	int i;
+
+	bangdata = (data << 4) | (addr & 0xf);
+
+	reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput) & 0xfff3;
+	reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x7);
+
+	reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x7 | 0x400);
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(10);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(2);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(10);
+
+	for (i = 15; i >= 0; i--) {
+		u16 reg = reg80 | !!(bangdata & (1 << i));
+
+		if (i & 1)
+			rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
+
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1));
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1));
+
+		if (!(i & 1))
+			rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
+	}
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(10);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x400);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
+}
+
+static u16 rtl8225_read(struct ieee80211_hw *dev, u8 addr)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u16 reg80, reg82, reg84, out;
+	int i;
+
+	reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput);
+	reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
+	reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect) | 0x400;
+
+	reg80 &= ~0xF;
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x000F);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x000F);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(4);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(5);
+
+	for (i = 4; i >= 0; i--) {
+		u16 reg = reg80 | ((addr >> i) & 1);
+
+		if (!(i & 1)) {
+			rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
+			rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+			udelay(1);
+		}
+
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg | (1 << 1));
+		rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+		udelay(2);
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg | (1 << 1));
+		rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+		udelay(2);
+
+		if (i & 1) {
+			rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
+			rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+			udelay(1);
+		}
+	}
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x000E);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x040E);
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+			  reg80 | (1 << 3) | (1 << 1));
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(2);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+			  reg80 | (1 << 3));
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(2);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+			  reg80 | (1 << 3));
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(2);
+
+	out = 0;
+	for (i = 11; i >= 0; i--) {
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg80 | (1 << 3));
+		rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+		udelay(1);
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg80 | (1 << 3) | (1 << 1));
+		rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+		udelay(2);
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg80 | (1 << 3) | (1 << 1));
+		rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+		udelay(2);
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg80 | (1 << 3) | (1 << 1));
+		rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+		udelay(2);
+
+		if (rtl818x_ioread16(priv, &priv->map->RFPinsInput) & (1 << 1))
+			out |= 1 << i;
+
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg80 | (1 << 3));
+		rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+		udelay(2);
+	}
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+			  reg80 | (1 << 3) | (1 << 2));
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(2);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x03A0);
+
+	return out;
+}
+
+static const u16 rtl8225bcd_rxgain[] = {
+	0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
+	0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
+	0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
+	0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
+	0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
+	0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
+	0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
+	0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
+	0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
+	0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
+	0x07aa, 0x07ab, 0x07ac, 0x07ad, 0x07b0, 0x07b1, 0x07b2, 0x07b3,
+	0x07b4, 0x07b5, 0x07b8, 0x07b9, 0x07ba, 0x07bb, 0x07bb
+};
+
+static const u8 rtl8225_agc[] = {
+	0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e,
+	0x9d, 0x9c, 0x9b, 0x9a, 0x99, 0x98, 0x97, 0x96,
+	0x95, 0x94, 0x93, 0x92, 0x91, 0x90, 0x8f, 0x8e,
+	0x8d, 0x8c, 0x8b, 0x8a, 0x89, 0x88, 0x87, 0x86,
+	0x85, 0x84, 0x83, 0x82, 0x81, 0x80, 0x3f, 0x3e,
+	0x3d, 0x3c, 0x3b, 0x3a, 0x39, 0x38, 0x37, 0x36,
+	0x35, 0x34, 0x33, 0x32, 0x31, 0x30, 0x2f, 0x2e,
+	0x2d, 0x2c, 0x2b, 0x2a, 0x29, 0x28, 0x27, 0x26,
+	0x25, 0x24, 0x23, 0x22, 0x21, 0x20, 0x1f, 0x1e,
+	0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18, 0x17, 0x16,
+	0x15, 0x14, 0x13, 0x12, 0x11, 0x10, 0x0f, 0x0e,
+	0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, 0x07, 0x06,
+	0x05, 0x04, 0x03, 0x02, 0x01, 0x01, 0x01, 0x01,
+	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01
+};
+
+static const u8 rtl8225_gain[] = {
+	0x23, 0x88, 0x7c, 0xa5, /* -82dbm */
+	0x23, 0x88, 0x7c, 0xb5, /* -82dbm */
+	0x23, 0x88, 0x7c, 0xc5, /* -82dbm */
+	0x33, 0x80, 0x79, 0xc5, /* -78dbm */
+	0x43, 0x78, 0x76, 0xc5, /* -74dbm */
+	0x53, 0x60, 0x73, 0xc5, /* -70dbm */
+	0x63, 0x58, 0x70, 0xc5, /* -66dbm */
+};
+
+static const u8 rtl8225_threshold[] = {
+	0x8d, 0x8d, 0x8d, 0x8d, 0x9d, 0xad, 0xbd
+};
+
+static const u8 rtl8225_tx_gain_cck_ofdm[] = {
+	0x02, 0x06, 0x0e, 0x1e, 0x3e, 0x7e
+};
+
+static const u8 rtl8225_tx_power_cck[] = {
+	0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02,
+	0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02,
+	0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02,
+	0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02,
+	0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03,
+	0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03
+};
+
+static const u8 rtl8225_tx_power_cck_ch14[] = {
+	0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00,
+	0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00,
+	0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00,
+	0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00,
+	0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00,
+	0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00
+};
+
+static const u8 rtl8225_tx_power_ofdm[] = {
+	0x80, 0x90, 0xa2, 0xb5, 0xcb, 0xe4
+};
+
+static const u32 rtl8225_chan[] = {
+	0x085c, 0x08dc, 0x095c, 0x09dc, 0x0a5c, 0x0adc, 0x0b5c,
+	0x0bdc, 0x0c5c, 0x0cdc, 0x0d5c, 0x0ddc, 0x0e5c, 0x0f72
+};
+
+static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u8 cck_power, ofdm_power;
+	const u8 *tmp;
+	u32 reg;
+	int i;
+
+	cck_power = priv->channels[channel - 1].val & 0xFF;
+	ofdm_power = priv->channels[channel - 1].val >> 8;
+
+	cck_power = min(cck_power, (u8)35);
+	ofdm_power = min(ofdm_power, (u8)35);
+
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
+			 rtl8225_tx_gain_cck_ofdm[cck_power / 6] >> 1);
+
+	if (channel == 14)
+		tmp = &rtl8225_tx_power_cck_ch14[(cck_power % 6) * 8];
+	else
+		tmp = &rtl8225_tx_power_cck[(cck_power % 6) * 8];
+
+	for (i = 0; i < 8; i++)
+		rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++);
+
+	msleep(1); /* FIXME: optional? */
+
+	/* anaparam2 on */
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM,
+			 rtl8225_tx_gain_cck_ofdm[ofdm_power/6] >> 1);
+
+	tmp = &rtl8225_tx_power_ofdm[ofdm_power % 6];
+
+	rtl8225_write_phy_ofdm(dev, 5, *tmp);
+	rtl8225_write_phy_ofdm(dev, 7, *tmp);
+
+	msleep(1);
+}
+
+static void rtl8225_rf_init(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	int i;
+
+	rtl8180_set_anaparam(priv, RTL8225_ANAPARAM_ON);
+
+	/* host_pci_init */
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x0488);
+	rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	msleep(200);	/* FIXME: ehh?? */
+	rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0xFF & ~(1 << 6));
+
+	rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x000a8008);
+
+	/* TODO: check if we need really to change BRSR to do RF config */
+	rtl818x_ioread16(priv, &priv->map->BRSR);
+	rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF);
+	rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+	rtl8225_write(dev, 0x0, 0x067);
+	rtl8225_write(dev, 0x1, 0xFE0);
+	rtl8225_write(dev, 0x2, 0x44D);
+	rtl8225_write(dev, 0x3, 0x441);
+	rtl8225_write(dev, 0x4, 0x8BE);
+	rtl8225_write(dev, 0x5, 0xBF0);		/* TODO: minipci */
+	rtl8225_write(dev, 0x6, 0xAE6);
+	rtl8225_write(dev, 0x7, rtl8225_chan[0]);
+	rtl8225_write(dev, 0x8, 0x01F);
+	rtl8225_write(dev, 0x9, 0x334);
+	rtl8225_write(dev, 0xA, 0xFD4);
+	rtl8225_write(dev, 0xB, 0x391);
+	rtl8225_write(dev, 0xC, 0x050);
+	rtl8225_write(dev, 0xD, 0x6DB);
+	rtl8225_write(dev, 0xE, 0x029);
+	rtl8225_write(dev, 0xF, 0x914); msleep(1);
+
+	rtl8225_write(dev, 0x2, 0xC4D); msleep(100);
+
+	rtl8225_write(dev, 0x0, 0x127);
+
+	for (i = 0; i < ARRAY_SIZE(rtl8225bcd_rxgain); i++) {
+		rtl8225_write(dev, 0x1, i + 1);
+		rtl8225_write(dev, 0x2, rtl8225bcd_rxgain[i]);
+	}
+
+	rtl8225_write(dev, 0x0, 0x027);
+	rtl8225_write(dev, 0x0, 0x22F);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
+
+	for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) {
+		rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]);
+		msleep(1);
+		rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i);
+		msleep(1);
+	}
+
+	msleep(1);
+
+	rtl8225_write_phy_ofdm(dev, 0x00, 0x01); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x01, 0x02); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x02, 0x62); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x03, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x04, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x05, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x06, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x07, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x08, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x09, 0xfe); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0a, 0x09); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0b, 0x80); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0c, 0x01); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0f, 0x38); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x10, 0x84); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x11, 0x03); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x12, 0x20); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x13, 0x20); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x14, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x15, 0x40); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x16, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x17, 0x40); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x18, 0xef); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x19, 0x19); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1a, 0x20); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1b, 0x76); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1c, 0x04); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1e, 0x95); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1f, 0x75); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x20, 0x1f); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x21, 0x27); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x22, 0x16); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x24, 0x46); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x25, 0x20); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x27, 0x88); msleep(1);
+
+	rtl8225_write_phy_cck(dev, 0x00, 0x98); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x03, 0x20); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x04, 0x7e); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x05, 0x12); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x06, 0xfc); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x07, 0x78); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x08, 0x2e); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x10, 0x93); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x11, 0x88); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x12, 0x47); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x13, 0xd0);
+	rtl8225_write_phy_cck(dev, 0x19, 0x00);
+	rtl8225_write_phy_cck(dev, 0x1a, 0xa0);
+	rtl8225_write_phy_cck(dev, 0x1b, 0x08);
+	rtl8225_write_phy_cck(dev, 0x40, 0x86);
+	rtl8225_write_phy_cck(dev, 0x41, 0x8d); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x42, 0x15); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x43, 0x18); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x44, 0x1f); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x45, 0x1e); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x46, 0x1a); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x47, 0x15); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x48, 0x10); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x49, 0x0a); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x4a, 0x05); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x4b, 0x02); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x4c, 0x05); msleep(1);
+
+	rtl818x_iowrite8(priv, &priv->map->TESTR, 0x0D); msleep(1);
+
+	rtl8225_rf_set_tx_power(dev, 1);
+
+	/* RX antenna default to A */
+	rtl8225_write_phy_cck(dev, 0x10, 0x9b); msleep(1);	/* B: 0xDB */
+	rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1);	/* B: 0x10 */
+
+	rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);	/* B: 0x00 */
+	msleep(1);
+	rtl818x_iowrite32(priv, (__le32 __iomem *)((void __iomem *)priv->map + 0x94), 0x15c00002);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
+
+	rtl8225_write(dev, 0x0c, 0x50);
+	/* set OFDM initial gain */
+	rtl8225_write_phy_ofdm(dev, 0x0d, rtl8225_gain[4 * 4]);
+	rtl8225_write_phy_ofdm(dev, 0x23, rtl8225_gain[4 * 4 + 1]);
+	rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225_gain[4 * 4 + 2]);
+	rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225_gain[4 * 4 + 3]);
+	/* set CCK threshold */
+	rtl8225_write_phy_cck(dev, 0x41, rtl8225_threshold[0]);
+}
+
+static const u8 rtl8225z2_tx_power_cck_ch14[] = {
+	0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00
+};
+
+static const u8 rtl8225z2_tx_power_cck_B[] = {
+	0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x04
+};
+
+static const u8 rtl8225z2_tx_power_cck_A[] = {
+	0x33, 0x32, 0x2b, 0x23, 0x1a, 0x11, 0x08, 0x04
+};
+
+static const u8 rtl8225z2_tx_power_cck[] = {
+	0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04
+};
+
+static void rtl8225z2_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u8 cck_power, ofdm_power;
+	const u8 *tmp;
+	int i;
+
+	cck_power = priv->channels[channel - 1].val & 0xFF;
+	ofdm_power = priv->channels[channel - 1].val >> 8;
+
+	if (channel == 14)
+		tmp = rtl8225z2_tx_power_cck_ch14;
+	else if (cck_power == 12)
+		tmp = rtl8225z2_tx_power_cck_B;
+	else if (cck_power == 13)
+		tmp = rtl8225z2_tx_power_cck_A;
+	else
+		tmp = rtl8225z2_tx_power_cck;
+
+	for (i = 0; i < 8; i++)
+		rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++);
+
+	cck_power = min(cck_power, (u8)35);
+	if (cck_power == 13 || cck_power == 14)
+		cck_power = 12;
+	if (cck_power >= 15)
+		cck_power -= 2;
+
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, cck_power);
+	rtl818x_ioread8(priv, &priv->map->TX_GAIN_CCK);
+	msleep(1);
+
+	ofdm_power = min(ofdm_power, (u8)35);
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, ofdm_power);
+
+	rtl8225_write_phy_ofdm(dev, 2, 0x62);
+	rtl8225_write_phy_ofdm(dev, 5, 0x00);
+	rtl8225_write_phy_ofdm(dev, 6, 0x40);
+	rtl8225_write_phy_ofdm(dev, 7, 0x00);
+	rtl8225_write_phy_ofdm(dev, 8, 0x40);
+
+	msleep(1);
+}
+
+static const u16 rtl8225z2_rxgain[] = {
+	0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0008, 0x0009,
+	0x000a, 0x000b, 0x0102, 0x0103, 0x0104, 0x0105, 0x0140, 0x0141,
+	0x0142, 0x0143, 0x0144, 0x0145, 0x0180, 0x0181, 0x0182, 0x0183,
+	0x0184, 0x0185, 0x0188, 0x0189, 0x018a, 0x018b, 0x0243, 0x0244,
+	0x0245, 0x0280, 0x0281, 0x0282, 0x0283, 0x0284, 0x0285, 0x0288,
+	0x0289, 0x028a, 0x028b, 0x028c, 0x0342, 0x0343, 0x0344, 0x0345,
+	0x0380, 0x0381, 0x0382, 0x0383, 0x0384, 0x0385, 0x0388, 0x0389,
+	0x038a, 0x038b, 0x038c, 0x038d, 0x0390, 0x0391, 0x0392, 0x0393,
+	0x0394, 0x0395, 0x0398, 0x0399, 0x039a, 0x039b, 0x039c, 0x039d,
+	0x03a0, 0x03a1, 0x03a2, 0x03a3, 0x03a4, 0x03a5, 0x03a8, 0x03a9,
+	0x03aa, 0x03ab, 0x03ac, 0x03ad, 0x03b0, 0x03b1, 0x03b2, 0x03b3,
+	0x03b4, 0x03b5, 0x03b8, 0x03b9, 0x03ba, 0x03bb, 0x03bb
+};
+
+static void rtl8225z2_rf_init(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	int i;
+
+	rtl8180_set_anaparam(priv, RTL8225_ANAPARAM_ON);
+
+	/* host_pci_init */
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x0488);
+	rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	msleep(200);	/* FIXME: ehh?? */
+	rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0xFF & ~(1 << 6));
+
+	rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x00088008);
+
+	/* TODO: check if we need really to change BRSR to do RF config */
+	rtl818x_ioread16(priv, &priv->map->BRSR);
+	rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF);
+	rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
+
+	rtl8225_write(dev, 0x0, 0x0B7); msleep(1);
+	rtl8225_write(dev, 0x1, 0xEE0); msleep(1);
+	rtl8225_write(dev, 0x2, 0x44D); msleep(1);
+	rtl8225_write(dev, 0x3, 0x441); msleep(1);
+	rtl8225_write(dev, 0x4, 0x8C3); msleep(1);
+	rtl8225_write(dev, 0x5, 0xC72); msleep(1);
+	rtl8225_write(dev, 0x6, 0x0E6); msleep(1);
+	rtl8225_write(dev, 0x7, 0x82A); msleep(1);
+	rtl8225_write(dev, 0x8, 0x03F); msleep(1);
+	rtl8225_write(dev, 0x9, 0x335); msleep(1);
+	rtl8225_write(dev, 0xa, 0x9D4); msleep(1);
+	rtl8225_write(dev, 0xb, 0x7BB); msleep(1);
+	rtl8225_write(dev, 0xc, 0x850); msleep(1);
+	rtl8225_write(dev, 0xd, 0xCDF); msleep(1);
+	rtl8225_write(dev, 0xe, 0x02B); msleep(1);
+	rtl8225_write(dev, 0xf, 0x114); msleep(100);
+
+	if (!(rtl8225_read(dev, 6) & (1 << 7))) {
+		rtl8225_write(dev, 0x02, 0x0C4D);
+		msleep(200);
+		rtl8225_write(dev, 0x02, 0x044D);
+		msleep(100);
+		/* TODO: readd calibration failure message when the calibration
+		   check works */
+	}
+
+	rtl8225_write(dev, 0x0, 0x1B7);
+	rtl8225_write(dev, 0x3, 0x002);
+	rtl8225_write(dev, 0x5, 0x004);
+
+	for (i = 0; i < ARRAY_SIZE(rtl8225z2_rxgain); i++) {
+		rtl8225_write(dev, 0x1, i + 1);
+		rtl8225_write(dev, 0x2, rtl8225z2_rxgain[i]);
+	}
+
+	rtl8225_write(dev, 0x0, 0x0B7); msleep(100);
+	rtl8225_write(dev, 0x2, 0xC4D);
+
+	msleep(200);
+	rtl8225_write(dev, 0x2, 0x44D);
+	msleep(100);
+
+	rtl8225_write(dev, 0x00, 0x2BF);
+	rtl8225_write(dev, 0xFF, 0xFFFF);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
+
+	for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) {
+		rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]);
+		msleep(1);
+		rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i);
+		msleep(1);
+	}
+
+	msleep(1);
+
+	rtl8225_write_phy_ofdm(dev, 0x00, 0x01); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x01, 0x02); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x02, 0x62); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x03, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x04, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x05, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x06, 0x40); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x07, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x08, 0x40); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x09, 0xfe); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0a, 0x09); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x18, 0xef); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0b, 0x80); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0c, 0x01); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0d, 0x43);
+	rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0f, 0x38); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x10, 0x84); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x11, 0x06); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x12, 0x20); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x13, 0x20); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x14, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x15, 0x40); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x16, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x17, 0x40); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x18, 0xef); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x19, 0x19); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1a, 0x20); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1b, 0x11); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1c, 0x04); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1d, 0xc5); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1e, 0xb3); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1f, 0x75); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x20, 0x1f); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x21, 0x27); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x22, 0x16); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x23, 0x80); msleep(1); /* FIXME: not needed? */
+	rtl8225_write_phy_ofdm(dev, 0x24, 0x46); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x25, 0x20); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x27, 0x88); msleep(1);
+
+	rtl8225_write_phy_cck(dev, 0x00, 0x98); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x03, 0x20); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x04, 0x7e); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x05, 0x12); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x06, 0xfc); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x07, 0x78); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x08, 0x2e); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x10, 0x93); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x11, 0x88); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x12, 0x47); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x13, 0xd0);
+	rtl8225_write_phy_cck(dev, 0x19, 0x00);
+	rtl8225_write_phy_cck(dev, 0x1a, 0xa0);
+	rtl8225_write_phy_cck(dev, 0x1b, 0x08);
+	rtl8225_write_phy_cck(dev, 0x40, 0x86);
+	rtl8225_write_phy_cck(dev, 0x41, 0x8a); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x42, 0x15); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x43, 0x18); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x44, 0x36); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x45, 0x35); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x46, 0x2e); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x47, 0x25); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x48, 0x1c); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x49, 0x12); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x4a, 0x09); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x4b, 0x04); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x4c, 0x05); msleep(1);
+
+	rtl818x_iowrite8(priv, (u8 __iomem *)((void __iomem *)priv->map + 0x5B), 0x0D); msleep(1);
+
+	rtl8225z2_rf_set_tx_power(dev, 1);
+
+	/* RX antenna default to A */
+	rtl8225_write_phy_cck(dev, 0x10, 0x9b); msleep(1);	/* B: 0xDB */
+	rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1);	/* B: 0x10 */
+
+	rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);	/* B: 0x00 */
+	msleep(1);
+	rtl818x_iowrite32(priv, (__le32 __iomem *)((void __iomem *)priv->map + 0x94), 0x15c00002);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
+}
+
+static void rtl8225_rf_stop(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u8 reg;
+
+	rtl8225_write(dev, 0x4, 0x1f); msleep(1);
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_OFF);
+	rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_OFF);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+}
+
+static void rtl8225_rf_set_channel(struct ieee80211_hw *dev,
+				   struct ieee80211_conf *conf)
+{
+	struct rtl8180_priv *priv = dev->priv;
+
+	if (priv->rf->init == rtl8225_rf_init)
+		rtl8225_rf_set_tx_power(dev, conf->channel);
+	else
+		rtl8225z2_rf_set_tx_power(dev, conf->channel);
+
+	rtl8225_write(dev, 0x7, rtl8225_chan[conf->channel - 1]);
+	msleep(10);
+
+	if (conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) {
+		rtl818x_iowrite8(priv, &priv->map->SLOT, 0x9);
+		rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22);
+		rtl818x_iowrite8(priv, &priv->map->DIFS, 0x14);
+		rtl818x_iowrite8(priv, &priv->map->EIFS, 81);
+		rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0x73);
+	} else {
+		rtl818x_iowrite8(priv, &priv->map->SLOT, 0x14);
+		rtl818x_iowrite8(priv, &priv->map->SIFS, 0x44);
+		rtl818x_iowrite8(priv, &priv->map->DIFS, 0x24);
+		rtl818x_iowrite8(priv, &priv->map->EIFS, 81);
+		rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0xa5);
+	}
+}
+
+static const struct rtl818x_rf_ops rtl8225_ops = {
+	.name		= "rtl8225",
+	.init		= rtl8225_rf_init,
+	.stop		= rtl8225_rf_stop,
+	.set_chan	= rtl8225_rf_set_channel
+};
+
+static const struct rtl818x_rf_ops rtl8225z2_ops = {
+	.name		= "rtl8225z2",
+	.init		= rtl8225z2_rf_init,
+	.stop		= rtl8225_rf_stop,
+	.set_chan	= rtl8225_rf_set_channel
+};
+
+const struct rtl818x_rf_ops * rtl8180_detect_rf(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u16 reg8, reg9;
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x0488);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	msleep(100);
+
+	rtl8225_write(dev, 0, 0x1B7);
+
+	reg8 = rtl8225_read(dev, 8);
+	reg9 = rtl8225_read(dev, 9);
+
+	rtl8225_write(dev, 0, 0x0B7);
+
+	if (reg8 != 0x588 || reg9 != 0x700)
+		return &rtl8225_ops;
+
+	return &rtl8225z2_ops;
+}
diff --git a/drivers/net/wireless/rtl8180_rtl8225.h b/drivers/net/wireless/rtl8180_rtl8225.h
new file mode 100644
index 000000000000..310013a2d726
--- /dev/null
+++ b/drivers/net/wireless/rtl8180_rtl8225.h
@@ -0,0 +1,23 @@
+#ifndef RTL8180_RTL8225_H
+#define RTL8180_RTL8225_H
+
+#define RTL8225_ANAPARAM_ON	0xa0000b59
+#define RTL8225_ANAPARAM2_ON	0x860dec11
+#define RTL8225_ANAPARAM_OFF	0xa00beb59
+#define RTL8225_ANAPARAM2_OFF	0x840dec11
+
+const struct rtl818x_rf_ops * rtl8180_detect_rf(struct ieee80211_hw *);
+
+static inline void rtl8225_write_phy_ofdm(struct ieee80211_hw *dev,
+					  u8 addr, u8 data)
+{
+	rtl8180_write_phy(dev, addr, data);
+}
+
+static inline void rtl8225_write_phy_cck(struct ieee80211_hw *dev,
+					 u8 addr, u8 data)
+{
+	rtl8180_write_phy(dev, addr, data | 0x10000);
+}
+
+#endif /* RTL8180_RTL8225_H */
diff --git a/drivers/net/wireless/rtl8180_sa2400.c b/drivers/net/wireless/rtl8180_sa2400.c
new file mode 100644
index 000000000000..e08ace7b1cb7
--- /dev/null
+++ b/drivers/net/wireless/rtl8180_sa2400.c
@@ -0,0 +1,201 @@
+
+/*
+ * Radio tuning for Philips SA2400 on RTL8180
+ *
+ * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
+ *
+ * Code from the BSD driver and the rtl8181 project have been
+ * very useful to understand certain things
+ *
+ * I want to thanks the Authors of such projects and the Ndiswrapper
+ * project Authors.
+ *
+ * A special Big Thanks also is for all people who donated me cards,
+ * making possible the creation of the original rtl8180 driver
+ * from which this code is derived!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <net/mac80211.h>
+
+#include "rtl8180.h"
+#include "rtl8180_sa2400.h"
+
+static const u32 sa2400_chan[] = {
+	0x00096c, /* ch1 */
+	0x080970,
+	0x100974,
+	0x180978,
+	0x000980,
+	0x080984,
+	0x100988,
+	0x18098c,
+	0x000994,
+	0x080998,
+	0x10099c,
+	0x1809a0,
+	0x0009a8,
+	0x0009b4, /* ch 14 */
+};
+
+static void write_sa2400(struct ieee80211_hw *dev, u8 addr, u32 data)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u32 phy_config;
+
+	/* MAC will bang bits to the sa2400. sw 3-wire is NOT used */
+	phy_config = 0xb0000000;
+
+	phy_config |= ((u32)(addr & 0xf)) << 24;
+	phy_config |= data & 0xffffff;
+
+	rtl818x_iowrite32(priv,
+		(__le32 __iomem *) &priv->map->RFPinsOutput, phy_config);
+
+	msleep(3);
+}
+
+static void sa2400_write_phy_antenna(struct ieee80211_hw *dev, short chan)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u8 ant = SA2400_ANTENNA;
+
+	if (priv->rfparam & RF_PARAM_ANTBDEFAULT)
+		ant |= BB_ANTENNA_B;
+
+	if (chan == 14)
+		ant |= BB_ANTATTEN_CHAN14;
+
+	rtl8180_write_phy(dev, 0x10, ant);
+
+}
+
+static void sa2400_rf_set_channel(struct ieee80211_hw *dev,
+				  struct ieee80211_conf *conf)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u32 txpw = priv->channels[conf->channel - 1].val & 0xFF;
+	u32 chan = sa2400_chan[conf->channel - 1];
+
+	write_sa2400(dev, 7, txpw);
+
+	sa2400_write_phy_antenna(dev, chan);
+
+	write_sa2400(dev, 0, chan);
+	write_sa2400(dev, 1, 0xbb50);
+	write_sa2400(dev, 2, 0x80);
+	write_sa2400(dev, 3, 0);
+}
+
+static void sa2400_rf_stop(struct ieee80211_hw *dev)
+{
+	write_sa2400(dev, 4, 0);
+}
+
+static void sa2400_rf_init(struct ieee80211_hw *dev)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u32 anaparam, txconf;
+	u8 firdac;
+	int analogphy = priv->rfparam & RF_PARAM_ANALOGPHY;
+
+	anaparam = priv->anaparam;
+	anaparam &= ~(1 << ANAPARAM_TXDACOFF_SHIFT);
+	anaparam &= ~ANAPARAM_PWR1_MASK;
+	anaparam &= ~ANAPARAM_PWR0_MASK;
+
+	if (analogphy) {
+		anaparam |= SA2400_ANA_ANAPARAM_PWR1_ON << ANAPARAM_PWR1_SHIFT;
+		firdac = 0;
+	} else {
+		anaparam |= (SA2400_DIG_ANAPARAM_PWR1_ON << ANAPARAM_PWR1_SHIFT);
+		anaparam |= (SA2400_ANAPARAM_PWR0_ON << ANAPARAM_PWR0_SHIFT);
+		firdac = 1 << SA2400_REG4_FIRDAC_SHIFT;
+	}
+
+	rtl8180_set_anaparam(priv, anaparam);
+
+	write_sa2400(dev, 0, sa2400_chan[0]);
+	write_sa2400(dev, 1, 0xbb50);
+	write_sa2400(dev, 2, 0x80);
+	write_sa2400(dev, 3, 0);
+	write_sa2400(dev, 4, 0x19340 | firdac);
+	write_sa2400(dev, 5, 0x1dfb | (SA2400_MAX_SENS - 54) << 15);
+	write_sa2400(dev, 4, 0x19348 | firdac); /* calibrate VCO */
+
+	if (!analogphy)
+		write_sa2400(dev, 4, 0x1938c); /*???*/
+
+	write_sa2400(dev, 4, 0x19340 | firdac);
+
+	write_sa2400(dev, 0, sa2400_chan[0]);
+	write_sa2400(dev, 1, 0xbb50);
+	write_sa2400(dev, 2, 0x80);
+	write_sa2400(dev, 3, 0);
+	write_sa2400(dev, 4, 0x19344 | firdac); /* calibrate filter */
+
+	/* new from rtl8180 embedded driver (rtl8181 project) */
+	write_sa2400(dev, 6, 0x13ff | (1 << 23)); /* MANRX */
+	write_sa2400(dev, 8, 0); /* VCO */
+
+	if (analogphy) {
+		rtl8180_set_anaparam(priv, anaparam |
+				     (1 << ANAPARAM_TXDACOFF_SHIFT));
+
+		txconf = rtl818x_ioread32(priv, &priv->map->TX_CONF);
+		rtl818x_iowrite32(priv, &priv->map->TX_CONF,
+			txconf | RTL818X_TX_CONF_LOOPBACK_CONT);
+
+		write_sa2400(dev, 4, 0x19341); /* calibrates DC */
+
+		/* a 5us sleep is required here,
+		 * we rely on the 3ms delay introduced in write_sa2400 */
+		write_sa2400(dev, 4, 0x19345);
+
+		/* a 20us sleep is required here,
+		 * we rely on the 3ms delay introduced in write_sa2400 */
+
+		rtl818x_iowrite32(priv, &priv->map->TX_CONF, txconf);
+
+		rtl8180_set_anaparam(priv, anaparam);
+	}
+	/* end new code */
+
+	write_sa2400(dev, 4, 0x19341 | firdac); /* RTX MODE */
+
+	/* baseband configuration */
+	rtl8180_write_phy(dev, 0, 0x98);
+	rtl8180_write_phy(dev, 3, 0x38);
+	rtl8180_write_phy(dev, 4, 0xe0);
+	rtl8180_write_phy(dev, 5, 0x90);
+	rtl8180_write_phy(dev, 6, 0x1a);
+	rtl8180_write_phy(dev, 7, 0x64);
+
+	sa2400_write_phy_antenna(dev, 1);
+
+	rtl8180_write_phy(dev, 0x11, 0x80);
+
+	if (rtl818x_ioread8(priv, &priv->map->CONFIG2) &
+	    RTL818X_CONFIG2_ANTENNA_DIV)
+		rtl8180_write_phy(dev, 0x12, 0xc7); /* enable ant diversity */
+	else
+		rtl8180_write_phy(dev, 0x12, 0x47); /* disable ant diversity */
+
+	rtl8180_write_phy(dev, 0x13, 0x90 | priv->csthreshold);
+
+	rtl8180_write_phy(dev, 0x19, 0x0);
+	rtl8180_write_phy(dev, 0x1a, 0xa0);
+}
+
+const struct rtl818x_rf_ops sa2400_rf_ops = {
+	.name		= "Philips",
+	.init		= sa2400_rf_init,
+	.stop		= sa2400_rf_stop,
+	.set_chan	= sa2400_rf_set_channel
+};
diff --git a/drivers/net/wireless/rtl8180_sa2400.h b/drivers/net/wireless/rtl8180_sa2400.h
new file mode 100644
index 000000000000..a4aaa0d413f1
--- /dev/null
+++ b/drivers/net/wireless/rtl8180_sa2400.h
@@ -0,0 +1,36 @@
+#ifndef RTL8180_SA2400_H
+#define RTL8180_SA2400_H
+
+/*
+ * Radio tuning for Philips SA2400 on RTL8180
+ *
+ * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
+ *
+ * Code from the BSD driver and the rtl8181 project have been
+ * very useful to understand certain things
+ *
+ * I want to thanks the Authors of such projects and the Ndiswrapper
+ * project Authors.
+ *
+ * A special Big Thanks also is for all people who donated me cards,
+ * making possible the creation of the original rtl8180 driver
+ * from which this code is derived!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define SA2400_ANTENNA 0x91
+#define SA2400_DIG_ANAPARAM_PWR1_ON 0x8
+#define SA2400_ANA_ANAPARAM_PWR1_ON 0x28
+#define SA2400_ANAPARAM_PWR0_ON 0x3
+
+/* RX sensitivity in dbm */
+#define SA2400_MAX_SENS 85
+
+#define SA2400_REG4_FIRDAC_SHIFT 7
+
+extern const struct rtl818x_rf_ops sa2400_rf_ops;
+
+#endif /* RTL8180_SA2400_H */
diff --git a/drivers/net/wireless/rtl8187.h b/drivers/net/wireless/rtl8187.h
index 6ad322ef0da1..26a4f1097b4a 100644
--- a/drivers/net/wireless/rtl8187.h
+++ b/drivers/net/wireless/rtl8187.h
@@ -64,7 +64,7 @@ struct rtl8187_tx_hdr {
 struct rtl8187_priv {
 	/* common between rtl818x drivers */
 	struct rtl818x_csr *map;
-	void (*rf_init)(struct ieee80211_hw *);
+	const struct rtl818x_rf_ops *rf;
 	int mode;
 	int if_id;
 
diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
index 09e48d3bef36..8dab25a65990 100644
--- a/drivers/net/wireless/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -393,37 +393,19 @@ static int rtl8187_init_hw(struct ieee80211_hw *dev)
 	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FF7);
 	msleep(100);
 
-	priv->rf_init(dev);
+	priv->rf->init(dev);
 
 	rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
-	reg = rtl818x_ioread16(priv, &priv->map->PGSELECT) & 0xfffe;
-	rtl818x_iowrite16(priv, &priv->map->PGSELECT, reg | 0x1);
+	reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~1;
+	rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1);
 	rtl818x_iowrite16(priv, (__le16 *)0xFFFE, 0x10);
 	rtl818x_iowrite8(priv, &priv->map->TALLY_SEL, 0x80);
 	rtl818x_iowrite8(priv, (u8 *)0xFFFF, 0x60);
-	rtl818x_iowrite16(priv, &priv->map->PGSELECT, reg);
+	rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
 
 	return 0;
 }
 
-static void rtl8187_set_channel(struct ieee80211_hw *dev, int channel)
-{
-	u32 reg;
-	struct rtl8187_priv *priv = dev->priv;
-
-	reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
-	/* Enable TX loopback on MAC level to avoid TX during channel
-	 * changes, as this has be seen to causes problems and the
-	 * card will stop work until next reset
-	 */
-	rtl818x_iowrite32(priv, &priv->map->TX_CONF,
-			  reg | RTL818X_TX_CONF_LOOPBACK_MAC);
-	msleep(10);
-	rtl8225_rf_set_channel(dev, channel);
-	msleep(10);
-	rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
-}
-
 static int rtl8187_start(struct ieee80211_hw *dev)
 {
 	struct rtl8187_priv *priv = dev->priv;
@@ -492,7 +474,7 @@ static void rtl8187_stop(struct ieee80211_hw *dev)
 	reg &= ~RTL818X_CMD_RX_ENABLE;
 	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
 
-	rtl8225_rf_stop(dev);
+	priv->rf->stop(dev);
 
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
 	reg = rtl818x_ioread8(priv, &priv->map->CONFIG4);
@@ -543,7 +525,19 @@ static void rtl8187_remove_interface(struct ieee80211_hw *dev,
 static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
 {
 	struct rtl8187_priv *priv = dev->priv;
-	rtl8187_set_channel(dev, conf->channel);
+	u32 reg;
+
+	reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
+	/* Enable TX loopback on MAC level to avoid TX during channel
+	 * changes, as this has be seen to causes problems and the
+	 * card will stop work until next reset
+	 */
+	rtl818x_iowrite32(priv, &priv->map->TX_CONF,
+			  reg | RTL818X_TX_CONF_LOOPBACK_MAC);
+	msleep(10);
+	priv->rf->set_chan(dev, conf);
+	msleep(10);
+	rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
 
 	rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22);
 
@@ -753,23 +747,16 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 	eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_BASE,
 			  &priv->txpwr_base);
 
-	reg = rtl818x_ioread16(priv, &priv->map->PGSELECT) & ~1;
-	rtl818x_iowrite16(priv, &priv->map->PGSELECT, reg | 1);
+	reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~1;
+	rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1);
 	/* 0 means asic B-cut, we should use SW 3 wire
 	 * bit-by-bit banging for radio. 1 means we can use
 	 * USB specific request to write radio registers */
 	priv->asic_rev = rtl818x_ioread8(priv, (u8 *)0xFFFE) & 0x3;
-	rtl818x_iowrite16(priv, &priv->map->PGSELECT, reg);
+	rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
 
-	rtl8225_write(dev, 0, 0x1B7);
-
-	if (rtl8225_read(dev, 8) != 0x588 || rtl8225_read(dev, 9) != 0x700)
-		priv->rf_init = rtl8225_rf_init;
-	else
-		priv->rf_init = rtl8225z2_rf_init;
-
-	rtl8225_write(dev, 0, 0x0B7);
+	priv->rf = rtl8187_detect_rf(dev);
 
 	err = ieee80211_register_hw(dev);
 	if (err) {
@@ -779,8 +766,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 
 	printk(KERN_INFO "%s: hwaddr %s, rtl8187 V%d + %s\n",
 	       wiphy_name(dev->wiphy), print_mac(mac, dev->wiphy->perm_addr),
-	       priv->asic_rev, priv->rf_init == rtl8225_rf_init ?
-	       "rtl8225" : "rtl8225z2");
+	       priv->asic_rev, priv->rf->name);
 
 	return 0;
 
diff --git a/drivers/net/wireless/rtl8187_rtl8225.c b/drivers/net/wireless/rtl8187_rtl8225.c
index efc41207780e..b713de17ba0a 100644
--- a/drivers/net/wireless/rtl8187_rtl8225.c
+++ b/drivers/net/wireless/rtl8187_rtl8225.c
@@ -101,7 +101,7 @@ static void rtl8225_write_8051(struct ieee80211_hw *dev, u8 addr, __le16 data)
 	msleep(2);
 }
 
-void rtl8225_write(struct ieee80211_hw *dev, u8 addr, u16 data)
+static void rtl8225_write(struct ieee80211_hw *dev, u8 addr, u16 data)
 {
 	struct rtl8187_priv *priv = dev->priv;
 
@@ -111,7 +111,7 @@ void rtl8225_write(struct ieee80211_hw *dev, u8 addr, u16 data)
 		rtl8225_write_bitbang(dev, addr, data);
 }
 
-u16 rtl8225_read(struct ieee80211_hw *dev, u8 addr)
+static u16 rtl8225_read(struct ieee80211_hw *dev, u8 addr)
 {
 	struct rtl8187_priv *priv = dev->priv;
 	u16 reg80, reg82, reg84, out;
@@ -325,7 +325,7 @@ static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
 	msleep(1);
 }
 
-void rtl8225_rf_init(struct ieee80211_hw *dev)
+static void rtl8225_rf_init(struct ieee80211_hw *dev)
 {
 	struct rtl8187_priv *priv = dev->priv;
 	int i;
@@ -567,7 +567,7 @@ static const u8 rtl8225z2_gain_bg[] = {
 	0x63, 0x15, 0xc5  /* -66dBm */
 };
 
-void rtl8225z2_rf_init(struct ieee80211_hw *dev)
+static void rtl8225z2_rf_init(struct ieee80211_hw *dev)
 {
 	struct rtl8187_priv *priv = dev->priv;
 	int i;
@@ -715,7 +715,7 @@ void rtl8225z2_rf_init(struct ieee80211_hw *dev)
 	rtl818x_iowrite32(priv, (__le32 *)0xFF94, 0x3dc00002);
 }
 
-void rtl8225_rf_stop(struct ieee80211_hw *dev)
+static void rtl8225_rf_stop(struct ieee80211_hw *dev)
 {
 	u8 reg;
 	struct rtl8187_priv *priv = dev->priv;
@@ -731,15 +731,47 @@ void rtl8225_rf_stop(struct ieee80211_hw *dev)
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
 }
 
-void rtl8225_rf_set_channel(struct ieee80211_hw *dev, int channel)
+static void rtl8225_rf_set_channel(struct ieee80211_hw *dev,
+				   struct ieee80211_conf *conf)
 {
 	struct rtl8187_priv *priv = dev->priv;
 
-	if (priv->rf_init == rtl8225_rf_init)
-		rtl8225_rf_set_tx_power(dev, channel);
+	if (priv->rf->init == rtl8225_rf_init)
+		rtl8225_rf_set_tx_power(dev, conf->channel);
 	else
-		rtl8225z2_rf_set_tx_power(dev, channel);
+		rtl8225z2_rf_set_tx_power(dev, conf->channel);
 
-	rtl8225_write(dev, 0x7, rtl8225_chan[channel - 1]);
+	rtl8225_write(dev, 0x7, rtl8225_chan[conf->channel - 1]);
 	msleep(10);
 }
+
+static const struct rtl818x_rf_ops rtl8225_ops = {
+	.name		= "rtl8225",
+	.init		= rtl8225_rf_init,
+	.stop		= rtl8225_rf_stop,
+	.set_chan	= rtl8225_rf_set_channel
+};
+
+static const struct rtl818x_rf_ops rtl8225z2_ops = {
+	.name		= "rtl8225z2",
+	.init		= rtl8225z2_rf_init,
+	.stop		= rtl8225_rf_stop,
+	.set_chan	= rtl8225_rf_set_channel
+};
+
+const struct rtl818x_rf_ops * rtl8187_detect_rf(struct ieee80211_hw *dev)
+{
+	u16 reg8, reg9;
+
+	rtl8225_write(dev, 0, 0x1B7);
+
+	reg8 = rtl8225_read(dev, 8);
+	reg9 = rtl8225_read(dev, 9);
+
+	rtl8225_write(dev, 0, 0x0B7);
+
+	if (reg8 != 0x588 || reg9 != 0x700)
+		return &rtl8225_ops;
+
+	return &rtl8225z2_ops;
+}
diff --git a/drivers/net/wireless/rtl8187_rtl8225.h b/drivers/net/wireless/rtl8187_rtl8225.h
index 798ba4a97376..d39ed0295b6e 100644
--- a/drivers/net/wireless/rtl8187_rtl8225.h
+++ b/drivers/net/wireless/rtl8187_rtl8225.h
@@ -20,14 +20,7 @@
 #define RTL8225_ANAPARAM_OFF	0xa00beb59
 #define RTL8225_ANAPARAM2_OFF	0x840dec11
 
-void rtl8225_write(struct ieee80211_hw *, u8 addr, u16 data);
-u16  rtl8225_read(struct ieee80211_hw *, u8 addr);
-
-void rtl8225_rf_init(struct ieee80211_hw *);
-void rtl8225z2_rf_init(struct ieee80211_hw *);
-void rtl8225_rf_stop(struct ieee80211_hw *);
-void rtl8225_rf_set_channel(struct ieee80211_hw *, int);
-
+const struct rtl818x_rf_ops * rtl8187_detect_rf(struct ieee80211_hw *);
 
 static inline void rtl8225_write_phy_ofdm(struct ieee80211_hw *dev,
 					  u8 addr, u32 data)
diff --git a/drivers/net/wireless/rtl818x.h b/drivers/net/wireless/rtl818x.h
index 880d4becae31..1e7d6f8278d7 100644
--- a/drivers/net/wireless/rtl818x.h
+++ b/drivers/net/wireless/rtl818x.h
@@ -58,13 +58,17 @@ struct rtl818x_csr {
 #define RTL818X_INT_TX_FO		(1 << 15)
 	__le32	TX_CONF;
 #define RTL818X_TX_CONF_LOOPBACK_MAC	(1 << 17)
+#define RTL818X_TX_CONF_LOOPBACK_CONT	(3 << 17)
 #define RTL818X_TX_CONF_NO_ICV		(1 << 19)
 #define RTL818X_TX_CONF_DISCW		(1 << 20)
+#define RTL818X_TX_CONF_SAT_HWPLCP	(1 << 24)
 #define RTL818X_TX_CONF_R8180_ABCD	(2 << 25)
 #define RTL818X_TX_CONF_R8180_F		(3 << 25)
 #define RTL818X_TX_CONF_R8185_ABC	(4 << 25)
 #define RTL818X_TX_CONF_R8185_D		(5 << 25)
 #define RTL818X_TX_CONF_HWVER_MASK	(7 << 25)
+#define RTL818X_TX_CONF_PROBE_DTS	(1 << 29)
+#define RTL818X_TX_CONF_HW_SEQNUM	(1 << 30)
 #define RTL818X_TX_CONF_CW_MIN		(1 << 31)
 	__le32	RX_CONF;
 #define RTL818X_RX_CONF_MONITOR		(1 <<  0)
@@ -75,8 +79,12 @@ struct rtl818x_csr {
 #define RTL818X_RX_CONF_DATA		(1 << 18)
 #define RTL818X_RX_CONF_CTRL		(1 << 19)
 #define RTL818X_RX_CONF_MGMT		(1 << 20)
+#define RTL818X_RX_CONF_ADDR3		(1 << 21)
+#define RTL818X_RX_CONF_PM		(1 << 22)
 #define RTL818X_RX_CONF_BSSID		(1 << 23)
 #define RTL818X_RX_CONF_RX_AUTORESETPHY	(1 << 28)
+#define RTL818X_RX_CONF_CSDM1		(1 << 29)
+#define RTL818X_RX_CONF_CSDM2		(1 << 30)
 #define RTL818X_RX_CONF_ONLYERLPKT	(1 << 31)
 	__le32	INT_TIMEOUT;
 	__le32	TBDA;
@@ -92,6 +100,7 @@ struct rtl818x_csr {
 	u8	CONFIG0;
 	u8	CONFIG1;
 	u8	CONFIG2;
+#define RTL818X_CONFIG2_ANTENNA_DIV	(1 << 6)
 	__le32	ANAPARAM;
 	u8	MSR;
 #define RTL818X_MSR_NO_LINK		(0 << 2)
@@ -104,14 +113,17 @@ struct rtl818x_csr {
 #define RTL818X_CONFIG4_VCOOFF		(1 << 7)
 	u8	TESTR;
 	u8	reserved_9[2];
-	__le16	PGSELECT;
+	u8	PGSELECT;
+	u8	SECURITY;
 	__le32	ANAPARAM2;
 	u8	reserved_10[12];
 	__le16	BEACON_INTERVAL;
 	__le16	ATIM_WND;
 	__le16	BEACON_INTERVAL_TIME;
 	__le16	ATIMTR_INTERVAL;
-	u8	reserved_11[4];
+	u8	PHY_DELAY;
+	u8	CARRIER_SENSE_COUNTER;
+	u8	reserved_11[2];
 	u8	PHY[4];
 	__le16	RFPinsOutput;
 	__le16	RFPinsEnable;
@@ -149,11 +161,20 @@ struct rtl818x_csr {
 	u8	RETRY_CTR;
 	u8	reserved_18[5];
 	__le32	RDSAR;
-	u8	reserved_19[18];
-	u16	TALLY_CNT;
+	u8	reserved_19[12];
+	__le16	FEMR;
+	u8	reserved_20[4];
+	__le16	TALLY_CNT;
 	u8	TALLY_SEL;
 } __attribute__((packed));
 
+struct rtl818x_rf_ops {
+	char *name;
+	void (*init)(struct ieee80211_hw *);
+	void (*stop)(struct ieee80211_hw *);
+	void (*set_chan)(struct ieee80211_hw *, struct ieee80211_conf *);
+};
+
 static const struct ieee80211_rate rtl818x_rates[] = {
 	{ .rate = 10,
 	  .val = 0,
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 6b4a132bf861..c69531348363 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2082,6 +2082,9 @@
 #define PCI_DEVICE_ID_ALTIMA_AC9100	0x03ea
 #define PCI_DEVICE_ID_ALTIMA_AC1003	0x03eb
 
+#define PCI_VENDOR_ID_BELKIN		0x1799
+#define PCI_DEVICE_ID_BELKIN_F5D7010V7	0x701f
+
 #define PCI_VENDOR_ID_LENOVO		0x17aa
 
 #define PCI_VENDOR_ID_ARECA		0x17d3