Merge tag 'regulator-v3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A few small fixes for v3.10, documentation things in the core and a
  few driver bugs."

* tag 'regulator-v3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: palmas: Fix "enable_reg" to point to the correct reg for SMPS10
  regulator: palmas: Fix incorrect condition
  regulator: core: Correct spelling mistake in comment
  regulator: dbx500: Make local symbol static
  regulator: Fix kernel-doc generation warnings.

3 files changed, 19 insertions, 16 deletions

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 6e5017841582..815d6df8bd5f 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1539,7 +1539,10 @@ static void regulator_ena_gpio_free(struct regulator_dev *rdev)
 }
 
 /**
- * Balance enable_count of each GPIO and actual GPIO pin control.
+ * regulator_ena_gpio_ctrl - balance enable_count of each GPIO and actual GPIO pin control
+ * @rdev: regulator_dev structure
+ * @enable: enable GPIO at initial use?
+ *
  * GPIO is enabled in case of initial use. (enable_count is 0)
  * GPIO is disabled when it is not shared any more. (enable_count <= 1)
  */
@@ -2702,7 +2705,7 @@ EXPORT_SYMBOL_GPL(regulator_get_voltage);
 /**
  * regulator_set_current_limit - set regulator output current limit
  * @regulator: regulator source
- * @min_uA: Minimuum supported current in uA
+ * @min_uA: Minimum supported current in uA
  * @max_uA: Maximum supported current in uA
  *
  * Sets current sink to the desired output current. This can be set during
diff --git a/drivers/regulator/dbx500-prcmu.c b/drivers/regulator/dbx500-prcmu.c
index 89bd2faaef8c..ce89f7848a57 100644
--- a/drivers/regulator/dbx500-prcmu.c
+++ b/drivers/regulator/dbx500-prcmu.c
@@ -24,18 +24,6 @@
 static int power_state_active_cnt; /* will initialize to zero */
 static DEFINE_SPINLOCK(power_state_active_lock);
 
-int power_state_active_get(void)
-{
-	unsigned long flags;
-	int cnt;
-
-	spin_lock_irqsave(&power_state_active_lock, flags);
-	cnt = power_state_active_cnt;
-	spin_unlock_irqrestore(&power_state_active_lock, flags);
-
-	return cnt;
-}
-
 void power_state_active_enable(void)
 {
 	unsigned long flags;
@@ -65,6 +53,18 @@ out:
 
 #ifdef CONFIG_REGULATOR_DEBUG
 
+static int power_state_active_get(void)
+{
+	unsigned long flags;
+	int cnt;
+
+	spin_lock_irqsave(&power_state_active_lock, flags);
+	cnt = power_state_active_cnt;
+	spin_unlock_irqrestore(&power_state_active_lock, flags);
+
+	return cnt;
+}
+
 static struct ux500_regulator_debug {
 	struct dentry *dir;
 	struct dentry *status_file;
diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index 92ceed0fc65e..3ae44ac12a94 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -840,7 +840,7 @@ static int palmas_regulators_probe(struct platform_device *pdev)
 			break;
 		}
 
-		if ((id == PALMAS_REG_SMPS6) && (id == PALMAS_REG_SMPS8))
+		if ((id == PALMAS_REG_SMPS6) || (id == PALMAS_REG_SMPS8))
 			ramp_delay_support = true;
 
 		if (ramp_delay_support) {
@@ -878,7 +878,7 @@ static int palmas_regulators_probe(struct platform_device *pdev)
 			pmic->desc[id].vsel_mask = SMPS10_VSEL;
 			pmic->desc[id].enable_reg =
 					PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
-							PALMAS_SMPS10_STATUS);
+							PALMAS_SMPS10_CTRL);
 			pmic->desc[id].enable_mask = SMPS10_BOOST_EN;
 			pmic->desc[id].min_uV = 3750000;
 			pmic->desc[id].uV_step = 1250000;