Merge tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "RTC for 4.8

  Cleanups:
   - huge cleanup of rtc-generic and char/genrtc this allowed to cleanup
     rtc-cmos, rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc
   - move mn10300 to rtc-cmos

  Subsystem:
   - fix wakealarms after hibernate
   - multiples fixes for rctest
   - simplify implementations of .read_alarm

  New drivers:
   - Maxim MAX6916

  Drivers:
   - ds1307: fix weekday
   - m41t80: add wakeup support
   - pcf85063: add support for PCF85063A variant
   - rv8803: extend i2c fix and other fixes
   - s35390a: fix alarm reading, this fixes instant reboot after
     shutdown for QNAP TS-41x
   - s3c: clock fixes"

* tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (65 commits)
  rtc: rv8803: Clear V1F when setting the time
  rtc: rv8803: Stop the clock while setting the time
  rtc: rv8803: Always apply the I²C workaround
  rtc: rv8803: Fix read day of week
  rtc: rv8803: Remove the check for valid time
  rtc: rv8803: Kconfig: Indicate rx8900 support
  rtc: asm9260: remove .owner field for driver
  rtc: at91sam9: Fix missing spin_lock_init()
  rtc: m41t80: add suspend handlers for alarm IRQ
  rtc: m41t80: make it a real error message
  rtc: pcf85063: Add support for the PCF85063A device
  rtc: pcf85063: fix year range
  rtc: hym8563: in .read_alarm set .tm_sec to 0 to signal minute accuracy
  rtc: explicitly set tm_sec = 0 for drivers with minute accurancy
  rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq()
  rtc: s3c: Remove unnecessary call to disable already disabled clock
  rtc: abx80x: use devm_add_action_or_reset()
  rtc: m41t80: use devm_add_action_or_reset()
  rtc: fix a typo and reduce three empty lines to one
  rtc: s35390a: improve two comments in .set_alarm
  ...

105 files changed, 850 insertions, 1582 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index efc203109a62..e9c75275405d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9828,10 +9828,14 @@ L:	rtc-linux@googlegroups.com
 Q:	http://patchwork.ozlabs.org/project/rtc-linux/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git
 S:	Maintained
+F:	Documentation/devicetree/bindings/rtc/
 F:	Documentation/rtc.txt
 F:	drivers/rtc/
 F:	include/linux/rtc.h
 F:	include/uapi/linux/rtc.h
+F:	include/linux/rtc/
+F:	include/linux/platform_data/rtc-*
+F:	tools/testing/selftests/timers/rtctest.c
 
 REALTEK AUDIO CODECS
 M:	Bard Liao <bardliao@realtek.com>
diff --git a/arch/alpha/include/asm/rtc.h b/arch/alpha/include/asm/rtc.h
deleted file mode 100644
index f71c3b0ed360..000000000000
--- a/arch/alpha/include/asm/rtc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/rtc.h>
diff --git a/arch/alpha/kernel/core_marvel.c b/arch/alpha/kernel/core_marvel.c
index 53dd2f1a53aa..d5f0580746a5 100644
--- a/arch/alpha/kernel/core_marvel.c
+++ b/arch/alpha/kernel/core_marvel.c
@@ -24,7 +24,6 @@
 #include <asm/gct.h>
 #include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
-#include <asm/rtc.h>
 #include <asm/vga.h>
 
 #include "proto.h"
diff --git a/arch/alpha/kernel/rtc.c b/arch/alpha/kernel/rtc.c
index f535a3fd0f60..ceed68c7500b 100644
--- a/arch/alpha/kernel/rtc.c
+++ b/arch/alpha/kernel/rtc.c
@@ -15,8 +15,6 @@
 #include <linux/rtc.h>
 #include <linux/platform_device.h>
 
-#include <asm/rtc.h>
-
 #include "proto.h"
 
 
@@ -81,7 +79,7 @@ init_rtc_epoch(void)
 static int
 alpha_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	__get_rtc_time(tm);
+	mc146818_get_time(tm);
 
 	/* Adjust for non-default epochs.  It's easier to depend on the
 	   generic __get_rtc_time and adjust the epoch here than create
@@ -112,7 +110,7 @@ alpha_rtc_set_time(struct device *dev, struct rtc_time *tm)
 		tm = &xtm;
 	}
 
-	return __set_rtc_time(tm);
+	return mc146818_set_time(tm);
 }
 
 static int
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 45b81a2bcd4b..3b39ea353d30 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -16,7 +16,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/m48t86.h>
+#include <linux/platform_data/rtc-m48t86.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 3a58a5d4a28a..8d597267d0c4 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -16,7 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
-#include <linux/m48t86.h>
+#include <linux/platform_data/rtc-m48t86.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/timeriomem-rng.h>
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index fa5f51d633a3..be4a66166d61 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -14,7 +14,7 @@
 #include <linux/gpio.h>
 #include <linux/delay.h>
 
-#include <linux/rtc-v3020.h>
+#include <linux/platform_data/rtc-v3020.h>
 #include <video/mbxfb.h>
 
 #include <linux/spi/spi.h>
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 5f5ac7c8faf0..868448d2cd82 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -25,7 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/dm9000.h>
 #include <linux/leds.h>
-#include <linux/rtc-v3020.h>
+#include <linux/platform_data/rtc-v3020.h>
 #include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 6e0268deec43..03354c21e1f2 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -14,7 +14,7 @@
 #include <linux/delay.h>
 
 #include <linux/dm9000.h>
-#include <linux/rtc-v3020.h>
+#include <linux/platform_data/rtc-v3020.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
diff --git a/arch/frv/include/asm/mc146818rtc.h b/arch/frv/include/asm/mc146818rtc.h
deleted file mode 100644
index 90dfb7a633d1..000000000000
--- a/arch/frv/include/asm/mc146818rtc.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* mc146818rtc.h: RTC defs
- *
- * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_MC146818RTC_H
-#define _ASM_MC146818RTC_H
-
-
-#endif /* _ASM_MC146818RTC_H */
diff --git a/arch/h8300/include/asm/mc146818rtc.h b/arch/h8300/include/asm/mc146818rtc.h
deleted file mode 100644
index ab9d9646d241..000000000000
--- a/arch/h8300/include/asm/mc146818rtc.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Machine dependent access functions for RTC registers.
- */
-#ifndef _H8300_MC146818RTC_H
-#define _H8300_MC146818RTC_H
-
-/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */
-
-#endif /* _H8300_MC146818RTC_H */
diff --git a/arch/ia64/include/asm/mc146818rtc.h b/arch/ia64/include/asm/mc146818rtc.h
deleted file mode 100644
index 407787a237ba..000000000000
--- a/arch/ia64/include/asm/mc146818rtc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _ASM_IA64_MC146818RTC_H
-#define _ASM_IA64_MC146818RTC_H
-
-/*
- * Machine dependent access functions for RTC registers.
- */
-
-/* empty include file to satisfy the include in genrtc.c */
-
-#endif /* _ASM_IA64_MC146818RTC_H */
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index 01693df7f2f6..ec9cc1fdd237 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -35,7 +35,6 @@
 #include <asm/amigahw.h>
 #include <asm/amigaints.h>
 #include <asm/irq.h>
-#include <asm/rtc.h>
 #include <asm/machdep.h>
 #include <asm/io.h>
 
diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index 6e62d66c396e..432bc8bacfc2 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -15,7 +15,6 @@
 #include <asm/pgtable.h>
 #include <asm/apollohw.h>
 #include <asm/irq.h>
-#include <asm/rtc.h>
 #include <asm/machdep.h>
 
 u_long sio01_physaddr;
diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c
index 478623dbb209..611d4d9ea2bd 100644
--- a/arch/m68k/bvme6000/config.c
+++ b/arch/m68k/bvme6000/config.c
@@ -34,7 +34,6 @@
 #include <asm/setup.h>
 #include <asm/irq.h>
 #include <asm/traps.h>
-#include <asm/rtc.h>
 #include <asm/machdep.h>
 #include <asm/bvme6000hw.h>
 
diff --git a/arch/m68k/hp300/config.c b/arch/m68k/hp300/config.c
index a9befe65adc4..7cfab158fb61 100644
--- a/arch/m68k/hp300/config.c
+++ b/arch/m68k/hp300/config.c
@@ -12,6 +12,7 @@
 #include <linux/string.h>
 #include <linux/kernel.h>
 #include <linux/console.h>
+#include <linux/rtc.h>
 
 #include <asm/bootinfo.h>
 #include <asm/bootinfo-hp300.h>
@@ -20,7 +21,6 @@
 #include <asm/blinken.h>
 #include <asm/io.h>                               /* readb() and writeb() */
 #include <asm/hp300hw.h>
-#include <asm/rtc.h>
 
 #include "time.h"
 
diff --git a/arch/m68k/include/asm/rtc.h b/arch/m68k/include/asm/rtc.h
deleted file mode 100644
index a4d08ea122ee..000000000000
--- a/arch/m68k/include/asm/rtc.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/* include/asm-m68k/rtc.h
- *
- * Copyright Richard Zidlicky
- * implementation details for genrtc/q40rtc driver
- */
-/* permission is hereby granted to copy, modify and redistribute this code
- * in terms of the GNU Library General Public License, Version 2 or later,
- * at your option.
- */
-
-#ifndef _ASM_RTC_H
-#define _ASM_RTC_H
-
-#ifdef __KERNEL__
-
-#include <linux/rtc.h>
-#include <asm/errno.h>
-#include <asm/machdep.h>
-
-#define RTC_PIE 0x40		/* periodic interrupt enable */
-#define RTC_AIE 0x20		/* alarm interrupt enable */
-#define RTC_UIE 0x10		/* update-finished interrupt enable */
-
-/* some dummy definitions */
-#define RTC_BATT_BAD 0x100	/* battery bad */
-#define RTC_SQWE 0x08		/* enable square-wave output */
-#define RTC_DM_BINARY 0x04	/* all time/date values are BCD if clear */
-#define RTC_24H 0x02		/* 24 hour mode - else hours bit 7 means pm */
-#define RTC_DST_EN 0x01	        /* auto switch DST - works f. USA only */
-
-static inline unsigned int get_rtc_time(struct rtc_time *time)
-{
-	/*
-	 * Only the values that we read from the RTC are set. We leave
-	 * tm_wday, tm_yday and tm_isdst untouched. Even though the
-	 * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
-	 * by the RTC when initially set to a non-zero value.
-	 */
-	if (mach_hwclk)
-		mach_hwclk(0, time);
-	return RTC_24H;
-}
-
-static inline int set_rtc_time(struct rtc_time *time)
-{
-	if (mach_hwclk)
-		return mach_hwclk(1, time);
-	return -EINVAL;
-}
-
-static inline unsigned int get_rtc_ss(void)
-{
-	if (mach_get_ss)
-		return mach_get_ss();
-	else{
-		struct rtc_time h;
-
-		get_rtc_time(&h);
-		return h.tm_sec;
-	}
-}
-
-static inline int get_rtc_pll(struct rtc_pll_info *pll)
-{
-	if (mach_get_rtc_pll)
-		return mach_get_rtc_pll(pll);
-	else
-		return -EINVAL;
-}
-static inline int set_rtc_pll(struct rtc_pll_info *pll)
-{
-	if (mach_set_rtc_pll)
-		return mach_set_rtc_pll(pll);
-	else
-		return -EINVAL;
-}
-#endif /* __KERNEL__ */
-
-#endif /* _ASM__RTC_H */
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index 3857737e3958..4e5aa2f4f522 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -86,7 +86,49 @@ void read_persistent_clock(struct timespec *ts)
 	}
 }
 
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
+#if defined(CONFIG_ARCH_USES_GETTIMEOFFSET) && IS_ENABLED(CONFIG_RTC_DRV_GENERIC)
+static int rtc_generic_get_time(struct device *dev, struct rtc_time *tm)
+{
+	mach_hwclk(0, tm);
+	return rtc_valid_tm(tm);
+}
+
+static int rtc_generic_set_time(struct device *dev, struct rtc_time *tm)
+{
+	if (mach_hwclk(1, tm) < 0)
+		return -EOPNOTSUPP;
+	return 0;
+}
+
+static int rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+	struct rtc_pll_info pll;
+	struct rtc_pll_info __user *argp = (void __user *)arg;
+
+	switch (cmd) {
+	case RTC_PLL_GET:
+		if (!mach_get_rtc_pll || mach_get_rtc_pll(&pll))
+			return -EINVAL;
+		return copy_to_user(argp, &pll, sizeof pll) ? -EFAULT : 0;
+
+	case RTC_PLL_SET:
+		if (!mach_set_rtc_pll)
+			return -EINVAL;
+		if (!capable(CAP_SYS_TIME))
+			return -EACCES;
+		if (copy_from_user(&pll, argp, sizeof(pll)))
+			return -EFAULT;
+		return mach_set_rtc_pll(&pll);
+	}
+
+	return -ENOIOCTLCMD;
+}
+
+static const struct rtc_class_ops generic_rtc_ops = {
+	.ioctl = rtc_ioctl,
+	.read_time = rtc_generic_get_time,
+	.set_time = rtc_generic_set_time,
+};
 
 static int __init rtc_init(void)
 {
@@ -95,7 +137,9 @@ static int __init rtc_init(void)
 	if (!mach_hwclk)
 		return -ENODEV;
 
-	pdev = platform_device_register_simple("rtc-generic", -1, NULL, 0);
+	pdev = platform_device_register_data(NULL, "rtc-generic", -1,
+					     &generic_rtc_ops,
+					     sizeof(generic_rtc_ops));
 	return PTR_ERR_OR_ZERO(pdev);
 }
 
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index 689b47d292ac..2f33a33001e5 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -10,6 +10,7 @@
  * Miscellaneous linux stuff
  */
 
+#include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/mm.h>
@@ -25,6 +26,7 @@
 #include <linux/platform_device.h>
 #include <linux/adb.h>
 #include <linux/cuda.h>
+#include <linux/rtc.h>
 
 #include <asm/setup.h>
 #include <asm/bootinfo.h>
@@ -34,7 +36,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/pgtable.h>
-#include <asm/rtc.h>
 #include <asm/machdep.h>
 
 #include <asm/macintosh.h>
diff --git a/arch/m68k/mac/misc.c b/arch/m68k/mac/misc.c
index 707b61aea203..0fb54a90eac2 100644
--- a/arch/m68k/mac/misc.c
+++ b/arch/m68k/mac/misc.c
@@ -18,7 +18,6 @@
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
-#include <asm/rtc.h>
 #include <asm/segment.h>
 #include <asm/setup.h>
 #include <asm/macintosh.h>
diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c
index e6a3b56c6481..c11d38dfad08 100644
--- a/arch/m68k/mvme147/config.c
+++ b/arch/m68k/mvme147/config.c
@@ -32,7 +32,6 @@
 #include <asm/setup.h>
 #include <asm/irq.h>
 #include <asm/traps.h>
-#include <asm/rtc.h>
 #include <asm/machdep.h>
 #include <asm/mvme147hw.h>
 
diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c
index a53803cc66cd..58e240939d26 100644
--- a/arch/m68k/mvme16x/config.c
+++ b/arch/m68k/mvme16x/config.c
@@ -35,7 +35,6 @@
 #include <asm/setup.h>
 #include <asm/irq.h>
 #include <asm/traps.h>
-#include <asm/rtc.h>
 #include <asm/machdep.h>
 #include <asm/mvme16xhw.h>
 
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index e90fe903613e..fcb7f05b60b6 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -12,6 +12,7 @@
  * for more details.
  */
 
+#include <linux/errno.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
@@ -27,7 +28,6 @@
 #include <linux/platform_device.h>
 
 #include <asm/io.h>
-#include <asm/rtc.h>
 #include <asm/bootinfo.h>
 #include <asm/pgtable.h>
 #include <asm/setup.h>
diff --git a/arch/m68k/sun3/config.c b/arch/m68k/sun3/config.c
index 71884bf01d72..3af34fa3a344 100644
--- a/arch/m68k/sun3/config.c
+++ b/arch/m68k/sun3/config.c
@@ -26,7 +26,6 @@
 #include <asm/pgalloc.h>
 #include <asm/sun3-head.h>
 #include <asm/sun3mmu.h>
-#include <asm/rtc.h>
 #include <asm/machdep.h>
 #include <asm/machines.h>
 #include <asm/idprom.h>
diff --git a/arch/m68k/sun3/intersil.c b/arch/m68k/sun3/intersil.c
index 889829e11f1d..2cd0bcbe6f30 100644
--- a/arch/m68k/sun3/intersil.c
+++ b/arch/m68k/sun3/intersil.c
@@ -14,8 +14,8 @@
 #include <linux/rtc.h>
 
 #include <asm/errno.h>
-#include <asm/rtc.h>
 #include <asm/intersil.h>
+#include <asm/machdep.h>
 
 
 /* bits to set for start/run of the intersil */
diff --git a/arch/m68k/sun3x/time.c b/arch/m68k/sun3x/time.c
index c8eb08add6b0..431d3c4306dd 100644
--- a/arch/m68k/sun3x/time.c
+++ b/arch/m68k/sun3x/time.c
@@ -15,10 +15,10 @@
 
 #include <asm/irq.h>
 #include <asm/io.h>
+#include <asm/machdep.h>
 #include <asm/traps.h>
 #include <asm/sun3x.h>
 #include <asm/sun3ints.h>
-#include <asm/rtc.h>
 
 #include "time.h"
 
diff --git a/arch/mips/sgi-ip22/ip22-reset.c b/arch/mips/sgi-ip22/ip22-reset.c
index 063c2dd31e72..2f45b0357021 100644
--- a/arch/mips/sgi-ip22/ip22-reset.c
+++ b/arch/mips/sgi-ip22/ip22-reset.c
@@ -7,7 +7,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <linux/ds1286.h>
+#include <linux/rtc/ds1286.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c
index fb4b3520cdc6..7ee14f41fc25 100644
--- a/arch/mips/sni/time.c
+++ b/arch/mips/sni/time.c
@@ -8,7 +8,6 @@
 
 #include <asm/sni.h>
 #include <asm/time.h>
-#include <asm-generic/rtc.h>
 
 #define SNI_CLOCK_TICK_RATE	3686400
 #define SNI_COUNTER2_DIV	64
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
index 9627e81a6cbb..38e3494bfb63 100644
--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
@@ -236,7 +236,9 @@ source "kernel/Kconfig.hz"
 config MN10300_RTC
 	bool "Using MN10300 RTC"
 	depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050
-	select GENERIC_CMOS_UPDATE
+	select RTC_CLASS
+	select RTC_DRV_CMOS
+	select RTC_SYSTOHC
 	default n
 	help
 	  This option enables support for the RTC, thus enabling time to be
diff --git a/arch/mn10300/include/asm/rtc-regs.h b/arch/mn10300/include/asm/rtc-regs.h
index c42deefaec11..c81cacecb6e3 100644
--- a/arch/mn10300/include/asm/rtc-regs.h
+++ b/arch/mn10300/include/asm/rtc-regs.h
@@ -75,9 +75,9 @@
 #define RTC_PORT(x)		0xd8600000
 #define RTC_ALWAYS_BCD		1	/* RTC operates in binary mode */
 
-#define CMOS_READ(addr)		__SYSREG(0xd8600000 + (addr), u8)
+#define CMOS_READ(addr)		__SYSREG(0xd8600000 + (u32)(addr), u8)
 #define CMOS_WRITE(val, addr)	\
-	do { __SYSREG(0xd8600000 + (addr), u8) = val; } while (0)
+	do { __SYSREG(0xd8600000 + (u32)(addr), u8) = val; } while (0)
 
 #define RTC_IRQ			RTIRQ
 
diff --git a/arch/mn10300/include/asm/rtc.h b/arch/mn10300/include/asm/rtc.h
index 6c14bb1d0d9b..07dc87656197 100644
--- a/arch/mn10300/include/asm/rtc.h
+++ b/arch/mn10300/include/asm/rtc.h
@@ -25,6 +25,4 @@ static inline void calibrate_clock(void)
 
 #endif /* !CONFIG_MN10300_RTC */
 
-#include <asm-generic/rtc.h>
-
 #endif /* _ASM_RTC_H */
diff --git a/arch/mn10300/kernel/rtc.c b/arch/mn10300/kernel/rtc.c
index 48d7058b3295..f81f37025072 100644
--- a/arch/mn10300/kernel/rtc.c
+++ b/arch/mn10300/kernel/rtc.c
@@ -12,107 +12,19 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/mc146818rtc.h>
-#include <linux/bcd.h>
-#include <linux/timex.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
 #include <asm/rtc-regs.h>
 #include <asm/rtc.h>
 
 DEFINE_SPINLOCK(rtc_lock);
 EXPORT_SYMBOL(rtc_lock);
 
-/*
- * Read the current RTC time
- */
-void read_persistent_clock(struct timespec *ts)
-{
-	struct rtc_time tm;
-
-	get_rtc_time(&tm);
-
-	ts->tv_nsec = 0;
-	ts->tv_sec = mktime(tm.tm_year, tm.tm_mon, tm.tm_mday,
-			    tm.tm_hour, tm.tm_min, tm.tm_sec);
-
-	/* if rtc is way off in the past, set something reasonable */
-	if (ts->tv_sec < 0)
-		ts->tv_sec = mktime(2009, 1, 1, 12, 0, 0);
-}
-
-/*
- * In order to set the CMOS clock precisely, set_rtc_mmss has to be called 500
- * ms after the second nowtime has started, because when nowtime is written
- * into the registers of the CMOS clock, it will jump to the next second
- * precisely 500 ms later.  Check the Motorola MC146818A or Dallas DS12887 data
- * sheet for details.
- *
- * BUG: This routine does not handle hour overflow properly; it just
- *      sets the minutes. Usually you'll only notice that after reboot!
- */
-static int set_rtc_mmss(unsigned long nowtime)
-{
-	unsigned char save_control, save_freq_select;
-	int retval = 0;
-	int real_seconds, real_minutes, cmos_minutes;
-
-	/* gets recalled with irq locally disabled */
-	spin_lock(&rtc_lock);
-	save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being
-						* set */
-	CMOS_WRITE(save_control | RTC_SET, RTC_CONTROL);
-
-	save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset
-							* prescaler */
-	CMOS_WRITE(save_freq_select | RTC_DIV_RESET2, RTC_FREQ_SELECT);
-
-	cmos_minutes = CMOS_READ(RTC_MINUTES);
-	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-		cmos_minutes = bcd2bin(cmos_minutes);
-
-	/*
-	 * since we're only adjusting minutes and seconds,
-	 * don't interfere with hour overflow. This avoids
-	 * messing with unknown time zones but requires your
-	 * RTC not to be off by more than 15 minutes
-	 */
-	real_seconds = nowtime % 60;
-	real_minutes = nowtime / 60;
-	if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1)
-		/* correct for half hour time zone */
-		real_minutes += 30;
-	real_minutes %= 60;
-
-	if (abs(real_minutes - cmos_minutes) < 30) {
-		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-			real_seconds = bin2bcd(real_seconds);
-			real_minutes = bin2bcd(real_minutes);
-		}
-		CMOS_WRITE(real_seconds, RTC_SECONDS);
-		CMOS_WRITE(real_minutes, RTC_MINUTES);
-	} else {
-		printk_once(KERN_NOTICE
-		       "set_rtc_mmss: can't update from %d to %d\n",
-		       cmos_minutes, real_minutes);
-		retval = -1;
-	}
-
-	/* The following flags have to be released exactly in this order,
-	 * otherwise the DS12887 (popular MC146818A clone with integrated
-	 * battery and quartz) will not reset the oscillator and will not
-	 * update precisely 500 ms later. You won't find this mentioned in
-	 * the Dallas Semiconductor data sheets, but who believes data
-	 * sheets anyway ...                           -- Markus Kuhn
-	 */
-	CMOS_WRITE(save_control, RTC_CONTROL);
-	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-	spin_unlock(&rtc_lock);
-
-	return retval;
-}
-
-int update_persistent_clock(struct timespec now)
-{
-	return set_rtc_mmss(now.tv_sec);
-}
+static const __initdata struct resource res[] = {
+	DEFINE_RES_IO(RTC_PORT(0), RTC_IO_EXTENT),
+	DEFINE_RES_IRQ(RTC_IRQ),
+};
 
 /*
  * calibrate the TSC clock against the RTC
@@ -129,4 +41,6 @@ void __init calibrate_clock(void)
 	RTCRA |= RTCRA_DVR;
 	RTCRA &= ~RTCRA_DVR;
 	RTCRB &= ~RTCRB_SET;
+
+	platform_device_register_simple("rtc_cmos", -1, res, ARRAY_SIZE(res));
 }
diff --git a/arch/mn10300/proc-mn103e010/proc-init.c b/arch/mn10300/proc-mn103e010/proc-init.c
index 27b97980dca4..102d86a6ae56 100644
--- a/arch/mn10300/proc-mn103e010/proc-init.c
+++ b/arch/mn10300/proc-mn103e010/proc-init.c
@@ -9,7 +9,10 @@
  * 2 of the Licence, or (at your option) any later version.
  */
 #include <linux/kernel.h>
+#include <linux/irq.h>
+#include <asm/cacheflush.h>
 #include <asm/fpu.h>
+#include <asm/irq.h>
 #include <asm/rtc.h>
 #include <asm/busctl-regs.h>
 
diff --git a/arch/mn10300/proc-mn2ws0050/proc-init.c b/arch/mn10300/proc-mn2ws0050/proc-init.c
index ee6d03dbc8d8..950cc8dbb284 100644
--- a/arch/mn10300/proc-mn2ws0050/proc-init.c
+++ b/arch/mn10300/proc-mn2ws0050/proc-init.c
@@ -14,6 +14,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 
+#include <asm/cacheflush.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
diff --git a/arch/parisc/include/asm/mc146818rtc.h b/arch/parisc/include/asm/mc146818rtc.h
deleted file mode 100644
index adf41631449f..000000000000
--- a/arch/parisc/include/asm/mc146818rtc.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Machine dependent access functions for RTC registers.
- */
-#ifndef _ASM_MC146818RTC_H
-#define _ASM_MC146818RTC_H
-
-/* empty include file to satisfy the include in genrtc.c */
-
-#endif /* _ASM_MC146818RTC_H */
diff --git a/arch/parisc/include/asm/rtc.h b/arch/parisc/include/asm/rtc.h
deleted file mode 100644
index 099d641a42c2..000000000000
--- a/arch/parisc/include/asm/rtc.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/* 
- * include/asm-parisc/rtc.h
- *
- * Copyright 2002 Randolph CHung <tausq@debian.org>
- *
- * Based on: include/asm-ppc/rtc.h and the genrtc driver in the
- * 2.4 parisc linux tree
- */
-
-#ifndef __ASM_RTC_H__
-#define __ASM_RTC_H__
-
-#ifdef __KERNEL__
-
-#include <linux/rtc.h>
-
-#include <asm/pdc.h>
-
-#define SECS_PER_HOUR   (60 * 60)
-#define SECS_PER_DAY    (SECS_PER_HOUR * 24)
-
-
-#define RTC_PIE 0x40		/* periodic interrupt enable */
-#define RTC_AIE 0x20		/* alarm interrupt enable */
-#define RTC_UIE 0x10		/* update-finished interrupt enable */
-
-#define RTC_BATT_BAD 0x100	/* battery bad */
-
-/* some dummy definitions */
-#define RTC_SQWE 0x08		/* enable square-wave output */
-#define RTC_DM_BINARY 0x04	/* all time/date values are BCD if clear */
-#define RTC_24H 0x02		/* 24 hour mode - else hours bit 7 means pm */
-#define RTC_DST_EN 0x01	        /* auto switch DST - works f. USA only */
-
-# define __isleap(year) \
-  ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
-
-/* How many days come before each month (0-12).  */
-static const unsigned short int __mon_yday[2][13] =
-{
-	/* Normal years.  */
-	{ 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 },
-	/* Leap years.  */
-	{ 0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366 }
-};
-
-static inline unsigned int get_rtc_time(struct rtc_time *wtime)
-{
-	struct pdc_tod tod_data;
-	long int days, rem, y;
-	const unsigned short int *ip;
-
-	memset(wtime, 0, sizeof(*wtime));
-	if (pdc_tod_read(&tod_data) < 0)
-		return RTC_24H | RTC_BATT_BAD;
-
-	// most of the remainder of this function is:
-//	Copyright (C) 1991, 1993, 1997, 1998 Free Software Foundation, Inc.
-//	This was originally a part of the GNU C Library.
-//      It is distributed under the GPL, and was swiped from offtime.c
-
-
-	days = tod_data.tod_sec / SECS_PER_DAY;
-	rem = tod_data.tod_sec % SECS_PER_DAY;
-
-	wtime->tm_hour = rem / SECS_PER_HOUR;
-	rem %= SECS_PER_HOUR;
-	wtime->tm_min = rem / 60;
-	wtime->tm_sec = rem % 60;
-
-	y = 1970;
-
-#define DIV(a, b) ((a) / (b) - ((a) % (b) < 0))
-#define LEAPS_THRU_END_OF(y) (DIV (y, 4) - DIV (y, 100) + DIV (y, 400))
-
-	while (days < 0 || days >= (__isleap (y) ? 366 : 365))
-	{
-		/* Guess a corrected year, assuming 365 days per year.  */
-		long int yg = y + days / 365 - (days % 365 < 0);
-
-		/* Adjust DAYS and Y to match the guessed year.  */
-		days -= ((yg - y) * 365
-			 + LEAPS_THRU_END_OF (yg - 1)
-			 - LEAPS_THRU_END_OF (y - 1));
-		y = yg;
-	}
-	wtime->tm_year = y - 1900;
-
-	ip = __mon_yday[__isleap(y)];
-	for (y = 11; days < (long int) ip[y]; --y)
-		continue;
-	days -= ip[y];
-	wtime->tm_mon = y;
-	wtime->tm_mday = days + 1;
-
-	return RTC_24H;
-}
-
-static int set_rtc_time(struct rtc_time *wtime)
-{
-	u_int32_t secs;
-
-	secs = mktime(wtime->tm_year + 1900, wtime->tm_mon + 1, wtime->tm_mday, 
-		      wtime->tm_hour, wtime->tm_min, wtime->tm_sec);
-
-	if(pdc_tod_set(secs, 0) < 0)
-		return -1;
-	else
-		return 0;
-
-}
-
-static inline unsigned int get_rtc_ss(void)
-{
-	struct rtc_time h;
-
-	get_rtc_time(&h);
-	return h.tm_sec;
-}
-
-static inline int get_rtc_pll(struct rtc_pll_info *pll)
-{
-	return -EINVAL;
-}
-static inline int set_rtc_pll(struct rtc_pll_info *pll)
-{
-	return -EINVAL;
-}
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_RTC_H__ */
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index 31ec99a5f119..505cf1ac5af2 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -12,6 +12,7 @@
  */
 #include <linux/errno.h>
 #include <linux/module.h>
+#include <linux/rtc.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/param.h>
@@ -248,14 +249,47 @@ void __init start_cpu_itimer(void)
 	per_cpu(cpu_data, cpu).it_value = next_tick;
 }
 
+#if IS_ENABLED(CONFIG_RTC_DRV_GENERIC)
+static int rtc_generic_get_time(struct device *dev, struct rtc_time *tm)
+{
+	struct pdc_tod tod_data;
+
+	memset(tm, 0, sizeof(*tm));
+	if (pdc_tod_read(&tod_data) < 0)
+		return -EOPNOTSUPP;
+
+	/* we treat tod_sec as unsigned, so this can work until year 2106 */
+	rtc_time64_to_tm(tod_data.tod_sec, tm);
+	return rtc_valid_tm(tm);
+}
+
+static int rtc_generic_set_time(struct device *dev, struct rtc_time *tm)
+{
+	time64_t secs = rtc_tm_to_time64(tm);
+
+	if (pdc_tod_set(secs, 0) < 0)
+		return -EOPNOTSUPP;
+
+	return 0;
+}
+
+static const struct rtc_class_ops rtc_generic_ops = {
+	.read_time = rtc_generic_get_time,
+	.set_time = rtc_generic_set_time,
+};
+
 static int __init rtc_init(void)
 {
 	struct platform_device *pdev;
 
-	pdev = platform_device_register_simple("rtc-generic", -1, NULL, 0);
+	pdev = platform_device_register_data(NULL, "rtc-generic", -1,
+					     &rtc_generic_ops,
+					     sizeof(rtc_generic_ops));
+
 	return PTR_ERR_OR_ZERO(pdev);
 }
 device_initcall(rtc_init);
+#endif
 
 void read_persistent_clock(struct timespec *ts)
 {
diff --git a/arch/powerpc/include/asm/rtc.h b/arch/powerpc/include/asm/rtc.h
deleted file mode 100644
index f5802926b6c0..000000000000
--- a/arch/powerpc/include/asm/rtc.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Real-time clock definitions and interfaces
- *
- * Author: Tom Rini <trini@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Based on:
- * include/asm-m68k/rtc.h
- *
- * Copyright Richard Zidlicky
- * implementation details for genrtc/q40rtc driver
- *
- * And the old drivers/macintosh/rtc.c which was heavily based on:
- * Linux/SPARC Real Time Clock Driver
- * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
- *
- * With additional work by Paul Mackerras and Franz Sirl.
- */
-
-#ifndef __ASM_POWERPC_RTC_H__
-#define __ASM_POWERPC_RTC_H__
-
-#ifdef __KERNEL__
-
-#include <linux/rtc.h>
-
-#include <asm/machdep.h>
-#include <asm/time.h>
-
-#define RTC_PIE 0x40		/* periodic interrupt enable */
-#define RTC_AIE 0x20		/* alarm interrupt enable */
-#define RTC_UIE 0x10		/* update-finished interrupt enable */
-
-/* some dummy definitions */
-#define RTC_BATT_BAD 0x100	/* battery bad */
-#define RTC_SQWE 0x08		/* enable square-wave output */
-#define RTC_DM_BINARY 0x04	/* all time/date values are BCD if clear */
-#define RTC_24H 0x02		/* 24 hour mode - else hours bit 7 means pm */
-#define RTC_DST_EN 0x01	        /* auto switch DST - works f. USA only */
-
-static inline unsigned int get_rtc_time(struct rtc_time *time)
-{
-	if (ppc_md.get_rtc_time)
-		ppc_md.get_rtc_time(time);
-	return RTC_24H;
-}
-
-/* Set the current date and time in the real time clock. */
-static inline int set_rtc_time(struct rtc_time *time)
-{
-	if (ppc_md.set_rtc_time)
-		return ppc_md.set_rtc_time(time);
-	return -EINVAL;
-}
-
-static inline unsigned int get_rtc_ss(void)
-{
-	struct rtc_time h;
-
-	get_rtc_time(&h);
-	return h.tm_sec;
-}
-
-static inline int get_rtc_pll(struct rtc_pll_info *pll)
-{
-	return -EINVAL;
-}
-static inline int set_rtc_pll(struct rtc_pll_info *pll)
-{
-	return -EINVAL;
-}
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_POWERPC_RTC_H__ */
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 4e7759c8ca30..3efbedefba6a 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -56,6 +56,7 @@
 #include <linux/irq_work.h>
 #include <linux/clk-provider.h>
 #include <linux/suspend.h>
+#include <linux/rtc.h>
 #include <asm/trace.h>
 
 #include <asm/io.h>
@@ -1159,6 +1160,29 @@ void calibrate_delay(void)
 	loops_per_jiffy = tb_ticks_per_jiffy;
 }
 
+#if IS_ENABLED(CONFIG_RTC_DRV_GENERIC)
+static int rtc_generic_get_time(struct device *dev, struct rtc_time *tm)
+{
+	ppc_md.get_rtc_time(tm);
+	return rtc_valid_tm(tm);
+}
+
+static int rtc_generic_set_time(struct device *dev, struct rtc_time *tm)
+{
+	if (!ppc_md.set_rtc_time)
+		return -EOPNOTSUPP;
+
+	if (ppc_md.set_rtc_time(tm) < 0)
+		return -EOPNOTSUPP;
+
+	return 0;
+}
+
+static const struct rtc_class_ops rtc_generic_ops = {
+	.read_time = rtc_generic_get_time,
+	.set_time = rtc_generic_set_time,
+};
+
 static int __init rtc_init(void)
 {
 	struct platform_device *pdev;
@@ -1166,9 +1190,12 @@ static int __init rtc_init(void)
 	if (!ppc_md.get_rtc_time)
 		return -ENODEV;
 
-	pdev = platform_device_register_simple("rtc-generic", -1, NULL, 0);
+	pdev = platform_device_register_data(NULL, "rtc-generic", -1,
+					     &rtc_generic_ops,
+					     sizeof(rtc_generic_ops));
 
 	return PTR_ERR_OR_ZERO(pdev);
 }
 
 device_initcall(rtc_init);
+#endif
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 3663f71fd913..fbdae8377b71 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -321,6 +321,17 @@ config OF_RTC
 	  Uses information from the OF or flattened device tree to instantiate
 	  platform devices for direct mapped RTC chips like the DS1742 or DS1743.
 
+config GEN_RTC
+	bool "Use the platform RTC operations from user space"
+	select RTC_CLASS
+	select RTC_DRV_GENERIC
+	help
+	  This option provides backwards compatibility with the old gen_rtc.ko
+	  module that was traditionally used for old PowerPC machines.
+	  Platforms should migrate to enabling the RTC_DRV_GENERIC by hand
+	  replacing their get_rtc_time/set_rtc_time callbacks with
+	  a proper RTC device driver.
+
 config SIMPLE_GPIO
 	bool "Support for simple, memory-mapped GPIO controllers"
 	depends on PPC
diff --git a/arch/powerpc/platforms/ps3/time.c b/arch/powerpc/platforms/ps3/time.c
index 791c6142c4a7..11b45b58c81b 100644
--- a/arch/powerpc/platforms/ps3/time.c
+++ b/arch/powerpc/platforms/ps3/time.c
@@ -20,9 +20,9 @@
 
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/rtc.h>
 
 #include <asm/firmware.h>
-#include <asm/rtc.h>
 #include <asm/lv1call.h>
 #include <asm/ps3.h>
 
diff --git a/arch/sh/include/asm/mc146818rtc.h b/arch/sh/include/asm/mc146818rtc.h
deleted file mode 100644
index 0aee96a97330..000000000000
--- a/arch/sh/include/asm/mc146818rtc.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Machine dependent access functions for RTC registers.
- */
-#ifndef _ASM_MC146818RTC_H
-#define _ASM_MC146818RTC_H
-
-#endif /* _ASM_MC146818RTC_H */
diff --git a/arch/sh/include/asm/rtc.h b/arch/sh/include/asm/rtc.h
index 52b0c2dba979..f7b010d48af7 100644
--- a/arch/sh/include/asm/rtc.h
+++ b/arch/sh/include/asm/rtc.h
@@ -6,17 +6,6 @@ extern void (*board_time_init)(void);
 extern void (*rtc_sh_get_time)(struct timespec *);
 extern int (*rtc_sh_set_time)(const time_t);
 
-/* some dummy definitions */
-#define RTC_BATT_BAD 0x100	/* battery bad */
-#define RTC_SQWE 0x08		/* enable square-wave output */
-#define RTC_DM_BINARY 0x04	/* all time/date values are BCD if clear */
-#define RTC_24H 0x02		/* 24 hour mode - else hours bit 7 means pm */
-#define RTC_DST_EN 0x01	        /* auto switch DST - works f. USA only */
-
-struct rtc_time;
-unsigned int get_rtc_time(struct rtc_time *);
-int set_rtc_time(struct rtc_time *);
-
 #define RTC_CAP_4_DIGIT_YEAR	(1 << 0)
 
 struct sh_rtc_platform_info {
diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c
index d6d0a986c6e9..a4a7862b489a 100644
--- a/arch/sh/kernel/time.c
+++ b/arch/sh/kernel/time.c
@@ -50,27 +50,31 @@ int update_persistent_clock(struct timespec now)
 }
 #endif
 
-unsigned int get_rtc_time(struct rtc_time *tm)
+static int rtc_generic_get_time(struct device *dev, struct rtc_time *tm)
 {
-	if (rtc_sh_get_time != null_rtc_get_time) {
-		struct timespec tv;
+	struct timespec tv;
 
-		rtc_sh_get_time(&tv);
-		rtc_time_to_tm(tv.tv_sec, tm);
-	}
-
-	return RTC_24H;
+	rtc_sh_get_time(&tv);
+	rtc_time_to_tm(tv.tv_sec, tm);
+	return 0;
 }
-EXPORT_SYMBOL(get_rtc_time);
 
-int set_rtc_time(struct rtc_time *tm)
+static int rtc_generic_set_time(struct device *dev, struct rtc_time *tm)
 {
 	unsigned long secs;
 
 	rtc_tm_to_time(tm, &secs);
-	return rtc_sh_set_time(secs);
+	if ((rtc_sh_set_time == null_rtc_set_time) ||
+	    (rtc_sh_set_time(secs) < 0))
+		return -EOPNOTSUPP;
+
+	return 0;
 }
-EXPORT_SYMBOL(set_rtc_time);
+
+static const struct rtc_class_ops rtc_generic_ops = {
+	.read_time = rtc_generic_get_time,
+	.set_time = rtc_generic_set_time,
+};
 
 static int __init rtc_generic_init(void)
 {
@@ -79,7 +83,10 @@ static int __init rtc_generic_init(void)
 	if (rtc_sh_get_time == null_rtc_get_time)
 		return -ENODEV;
 
-	pdev = platform_device_register_simple("rtc-generic", -1, NULL, 0);
+	pdev = platform_device_register_data(NULL, "rtc-generic", -1,
+					     &rtc_generic_ops,
+					     sizeof(rtc_generic_ops));
+
 
 	return PTR_ERR_OR_ZERO(pdev);
 }
diff --git a/arch/sparc/include/asm/io_32.h b/arch/sparc/include/asm/io_32.h
index 57f26c398dc9..4dd268a3a8b0 100644
--- a/arch/sparc/include/asm/io_32.h
+++ b/arch/sparc/include/asm/io_32.h
@@ -140,16 +140,6 @@ void ioport_unmap(void __iomem *);
 struct pci_dev;
 void pci_iounmap(struct pci_dev *dev, void __iomem *);
 
-
-
-/*
- * At the moment, we do not use CMOS_READ anywhere outside of rtc.c,
- * so rtc_port is static in it. This should not change unless a new
- * hardware pops up.
- */
-#define RTC_PORT(x)   (rtc_port + (x))
-#define RTC_ALWAYS_BCD  0
-
 static inline int sbus_can_dma_64bit(void)
 {
 	return 0; /* actually, sparc_cpu_model==sun4d */
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 3a9add58d794..5c6e7471b732 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -152,6 +152,7 @@ config X86
 	select OLD_SIGSUSPEND3			if X86_32 || IA32_EMULATION
 	select PERF_EVENTS
 	select RTC_LIB
+	select RTC_MC146818_LIB
 	select SPARSE_IRQ
 	select SRCU
 	select SYSCTL_EXCEPTION_TRACE
diff --git a/arch/x86/include/asm/mc146818rtc.h b/arch/x86/include/asm/mc146818rtc.h
index 0f555cc31984..24acd9ba7837 100644
--- a/arch/x86/include/asm/mc146818rtc.h
+++ b/arch/x86/include/asm/mc146818rtc.h
@@ -6,7 +6,6 @@
 
 #include <asm/io.h>
 #include <asm/processor.h>
-#include <linux/mc146818rtc.h>
 
 #ifndef RTC_PORT
 #define RTC_PORT(x)	(0x70 + (x))
diff --git a/arch/x86/include/asm/rtc.h b/arch/x86/include/asm/rtc.h
deleted file mode 100644
index f71c3b0ed360..000000000000
--- a/arch/x86/include/asm/rtc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/rtc.h>
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 3d747070fe67..ed16e58658a4 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -1019,7 +1019,6 @@ void hpet_disable(void)
  */
 #include <linux/mc146818rtc.h>
 #include <linux/rtc.h>
-#include <asm/rtc.h>
 
 #define DEFAULT_RTC_INT_FREQ	64
 #define DEFAULT_RTC_SHIFT	6
@@ -1243,7 +1242,7 @@ irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
 	memset(&curr_time, 0, sizeof(struct rtc_time));
 
 	if (hpet_rtc_flags & (RTC_UIE | RTC_AIE))
-		get_rtc_time(&curr_time);
+		mc146818_set_time(&curr_time);
 
 	if (hpet_rtc_flags & RTC_UIE &&
 	    curr_time.tm_sec != hpet_prev_update_sec) {
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index 04b132a767f1..bfe4d6c96fbd 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -17,6 +17,7 @@
 #include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/hardirq.h>
+#include <linux/ratelimit.h>
 #include <linux/slab.h>
 #include <linux/export.h>
 
diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index eceaa082ec3f..79c6311cd912 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -13,7 +13,6 @@
 #include <asm/x86_init.h>
 #include <asm/time.h>
 #include <asm/intel-mid.h>
-#include <asm/rtc.h>
 #include <asm/setup.h>
 
 #ifdef CONFIG_X86_32
@@ -47,7 +46,7 @@ int mach_set_rtc_mmss(const struct timespec *now)
 
 	rtc_time_to_tm(nowtime, &tm);
 	if (!rtc_valid_tm(&tm)) {
-		retval = set_rtc_time(&tm);
+		retval = mc146818_set_time(&tm);
 		if (retval)
 			printk(KERN_ERR "%s: RTC write failed with error %d\n",
 			       __func__, retval);
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index 17c8bbd4e2f0..1fbb408e2e72 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -51,7 +51,6 @@
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
 #include <asm/x86_init.h>
-#include <asm/rtc.h>
 #include <asm/uv/uv.h>
 
 static struct efi efi_phys __initdata;
diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c
index 04db6fbce96d..677e29e29473 100644
--- a/arch/x86/platform/efi/efi_64.c
+++ b/arch/x86/platform/efi/efi_64.c
@@ -25,6 +25,7 @@
 #include <linux/bootmem.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
+#include <linux/mc146818rtc.h>
 #include <linux/efi.h>
 #include <linux/uaccess.h>
 #include <linux/io.h>
diff --git a/arch/x86/platform/intel-mid/intel_mid_vrtc.c b/arch/x86/platform/intel-mid/intel_mid_vrtc.c
index ee40fcb6e54d..58024862a7eb 100644
--- a/arch/x86/platform/intel-mid/intel_mid_vrtc.c
+++ b/arch/x86/platform/intel-mid/intel_mid_vrtc.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/sfi.h>
 #include <linux/platform_device.h>
+#include <linux/mc146818rtc.h>
 
 #include <asm/intel-mid.h>
 #include <asm/intel_mid_vrtc.h>
diff --git a/drivers/acpi/acpi_cmos_rtc.c b/drivers/acpi/acpi_cmos_rtc.c
index 81dc75033f15..0980a133916f 100644
--- a/drivers/acpi/acpi_cmos_rtc.c
+++ b/drivers/acpi/acpi_cmos_rtc.c
@@ -14,7 +14,7 @@
 #include <linux/err.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <asm-generic/rtc.h>
+#include <linux/mc146818rtc.h>
 
 #include "internal.h"
 
diff --git a/drivers/base/power/trace.c b/drivers/base/power/trace.c
index a6975795e7f3..efec10b49d59 100644
--- a/drivers/base/power/trace.c
+++ b/drivers/base/power/trace.c
@@ -11,7 +11,7 @@
 #include <linux/export.h>
 #include <linux/rtc.h>
 
-#include <asm/rtc.h>
+#include <linux/mc146818rtc.h>
 
 #include "power.h"
 
@@ -103,7 +103,7 @@ static int set_magic_time(unsigned int user, unsigned int file, unsigned int dev
 	n /= 24;
 	time.tm_min = (n % 20) * 3;
 	n /= 20;
-	set_rtc_time(&time);
+	mc146818_set_time(&time);
 	return n ? -1 : 0;
 }
 
@@ -112,7 +112,7 @@ static unsigned int read_magic_time(void)
 	struct rtc_time time;
 	unsigned int val;
 
-	get_rtc_time(&time);
+	mc146818_get_time(&time);
 	pr_info("RTC time: %2d:%02d:%02d, date: %02d/%02d/%02d\n",
 		time.tm_hour, time.tm_min, time.tm_sec,
 		time.tm_mon + 1, time.tm_mday, time.tm_year % 100);
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index fdb8f3e10b6f..dcc09739a54e 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -293,7 +293,7 @@ if RTC_LIB=n
 
 config RTC
 	tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)"
-	depends on ALPHA || (MIPS && MACH_LOONGSON64) || MN10300
+	depends on ALPHA || (MIPS && MACH_LOONGSON64)
 	---help---
 	  If you say Y here and create a character special file /dev/rtc with
 	  major number 10 and minor number 135 using mknod ("man mknod"), you
@@ -339,32 +339,6 @@ config JS_RTC
 	  To compile this driver as a module, choose M here: the
 	  module will be called js-rtc.
 
-config GEN_RTC
-	tristate "Generic /dev/rtc emulation"
-	depends on RTC!=y
-	depends on ALPHA || M68K || MN10300 || PARISC || PPC || X86
-	---help---
-	  If you say Y here and create a character special file /dev/rtc with
-	  major number 10 and minor number 135 using mknod ("man mknod"), you
-	  will get access to the real time clock (or hardware clock) built
-	  into your computer.
-
-	  It reports status information via the file /proc/driver/rtc and its
-	  behaviour is set by various ioctls on /dev/rtc. If you enable the
-	  "extended RTC operation" below it will also provide an emulation
-	  for RTC_UIE which is required by some programs and may improve
-	  precision in some cases.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called genrtc.
-
-config GEN_RTC_X
-	bool "Extended RTC operation"
-	depends on GEN_RTC
-	help
-	  Provides an emulation for RTC_UIE which is required by some programs
-	  and may improve precision of the generic RTC support in some cases.
-
 config EFI_RTC
 	bool "EFI Real Time Clock Services"
 	depends on IA64
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 55d16bf3ccc5..6e6c244a66a0 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -25,7 +25,6 @@ obj-$(CONFIG_APPLICOM)		+= applicom.o
 obj-$(CONFIG_SONYPI)		+= sonypi.o
 obj-$(CONFIG_RTC)		+= rtc.o
 obj-$(CONFIG_HPET)		+= hpet.o
-obj-$(CONFIG_GEN_RTC)		+= genrtc.o
 obj-$(CONFIG_EFI_RTC)		+= efirtc.o
 obj-$(CONFIG_DS1302)		+= ds1302.o
 obj-$(CONFIG_XILINX_HWICAP)	+= xilinx_hwicap/
diff --git a/drivers/char/genrtc.c b/drivers/char/genrtc.c
deleted file mode 100644
index 4f943759d376..000000000000
--- a/drivers/char/genrtc.c
+++ /dev/null
@@ -1,539 +0,0 @@
-/*
- *	Real Time Clock interface for
- *		- q40 and other m68k machines,
- *		- HP PARISC machines
- *		- PowerPC machines
- *      emulate some RTC irq capabilities in software
- *
- *      Copyright (C) 1999 Richard Zidlicky
- *
- *	based on Paul Gortmaker's rtc.c device and
- *           Sam Creasey Generic rtc driver
- *
- *	This driver allows use of the real time clock (built into
- *	nearly all computers) from user space. It exports the /dev/rtc
- *	interface supporting various ioctl() and also the /proc/driver/rtc
- *	pseudo-file for status information.
- *
- *	The ioctls can be used to set the interrupt behaviour where
- *	supported.
- *
- *	The /dev/rtc interface will block on reads until an interrupt
- *	has been received. If a RTC interrupt has already happened,
- *	it will output an unsigned long and then block. The output value
- *	contains the interrupt status in the low byte and the number of
- *	interrupts since the last read in the remaining high bytes. The
- *	/dev/rtc interface can also be used with the select(2) call.
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- *
-
- *      1.01 fix for 2.3.X                    rz@linux-m68k.org
- *      1.02 merged with code from genrtc.c   rz@linux-m68k.org
- *      1.03 make it more portable            zippel@linux-m68k.org
- *      1.04 removed useless timer code       rz@linux-m68k.org
- *      1.05 portable RTC_UIE emulation       rz@linux-m68k.org
- *      1.06 set_rtc_time can return an error trini@kernel.crashing.org
- *      1.07 ported to HP PARISC (hppa)	      Helge Deller <deller@gmx.de>
- */
-
-#define RTC_VERSION	"1.07"
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/miscdevice.h>
-#include <linux/fcntl.h>
-
-#include <linux/rtc.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/mutex.h>
-#include <linux/workqueue.h>
-
-#include <asm/uaccess.h>
-#include <asm/rtc.h>
-
-/*
- *	We sponge a minor off of the misc major. No need slurping
- *	up another valuable major dev number for this. If you add
- *	an ioctl, make sure you don't conflict with SPARC's RTC
- *	ioctls.
- */
-
-static DEFINE_MUTEX(gen_rtc_mutex);
-static DECLARE_WAIT_QUEUE_HEAD(gen_rtc_wait);
-
-/*
- *	Bits in gen_rtc_status.
- */
-
-#define RTC_IS_OPEN		0x01	/* means /dev/rtc is in use	*/
-
-static unsigned char gen_rtc_status;	/* bitmapped status byte.	*/
-static unsigned long gen_rtc_irq_data;	/* our output to the world	*/
-
-/* months start at 0 now */
-static unsigned char days_in_mo[] =
-{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
-
-static int irq_active;
-
-#ifdef CONFIG_GEN_RTC_X
-static struct work_struct genrtc_task;
-static struct timer_list timer_task;
-
-static unsigned int oldsecs;
-static int lostint;
-static unsigned long tt_exp;
-
-static void gen_rtc_timer(unsigned long data);
-
-static volatile int stask_active;              /* schedule_work */
-static volatile int ttask_active;              /* timer_task */
-static int stop_rtc_timers;                    /* don't requeue tasks */
-static DEFINE_SPINLOCK(gen_rtc_lock);
-
-static void gen_rtc_interrupt(unsigned long arg);
-
-/*
- * Routine to poll RTC seconds field for change as often as possible,
- * after first RTC_UIE use timer to reduce polling
- */
-static void genrtc_troutine(struct work_struct *work)
-{
-	unsigned int tmp = get_rtc_ss();
-	
-	if (stop_rtc_timers) {
-		stask_active = 0;
-		return;
-	}
-
-	if (oldsecs != tmp){
-		oldsecs = tmp;
-
-		timer_task.function = gen_rtc_timer;
-		timer_task.expires = jiffies + HZ - (HZ/10);
-		tt_exp=timer_task.expires;
-		ttask_active=1;
-		stask_active=0;
-		add_timer(&timer_task);
-
-		gen_rtc_interrupt(0);
-	} else if (schedule_work(&genrtc_task) == 0)
-		stask_active = 0;
-}
-
-static void gen_rtc_timer(unsigned long data)
-{
-	lostint = get_rtc_ss() - oldsecs ;
-	if (lostint<0) 
-		lostint = 60 - lostint;
-	if (time_after(jiffies, tt_exp))
-		printk(KERN_INFO "genrtc: timer task delayed by %ld jiffies\n",
-		       jiffies-tt_exp);
-	ttask_active=0;
-	stask_active=1;
-	if ((schedule_work(&genrtc_task) == 0))
-		stask_active = 0;
-}
-
-/* 
- * call gen_rtc_interrupt function to signal an RTC_UIE,
- * arg is unused.
- * Could be invoked either from a real interrupt handler or
- * from some routine that periodically (eg 100HZ) monitors
- * whether RTC_SECS changed
- */
-static void gen_rtc_interrupt(unsigned long arg)
-{
-	/*  We store the status in the low byte and the number of
-	 *	interrupts received since the last read in the remainder
-	 *	of rtc_irq_data.  */
-
-	gen_rtc_irq_data += 0x100;
-	gen_rtc_irq_data &= ~0xff;
-	gen_rtc_irq_data |= RTC_UIE;
-
-	if (lostint){
-		printk("genrtc: system delaying clock ticks?\n");
-		/* increment count so that userspace knows something is wrong */
-		gen_rtc_irq_data += ((lostint-1)<<8);
-		lostint = 0;
-	}
-
-	wake_up_interruptible(&gen_rtc_wait);
-}
-
-/*
- *	Now all the various file operations that we export.
- */
-static ssize_t gen_rtc_read(struct file *file, char __user *buf,
-			size_t count, loff_t *ppos)
-{
-	unsigned long data;
-	ssize_t retval;
-
-	if (count != sizeof (unsigned int) && count != sizeof (unsigned long))
-		return -EINVAL;
-
-	if (file->f_flags & O_NONBLOCK && !gen_rtc_irq_data)
-		return -EAGAIN;
-
-	retval = wait_event_interruptible(gen_rtc_wait,
-			(data = xchg(&gen_rtc_irq_data, 0)));
-	if (retval)
-		goto out;
-
-	/* first test allows optimizer to nuke this case for 32-bit machines */
-	if (sizeof (int) != sizeof (long) && count == sizeof (unsigned int)) {
-		unsigned int uidata = data;
-		retval = put_user(uidata, (unsigned int __user *)buf) ?:
-			sizeof(unsigned int);
-	}
-	else {
-		retval = put_user(data, (unsigned long __user *)buf) ?:
-			sizeof(unsigned long);
-	}
-out:
-	return retval;
-}
-
-static unsigned int gen_rtc_poll(struct file *file,
-				 struct poll_table_struct *wait)
-{
-	poll_wait(file, &gen_rtc_wait, wait);
-	if (gen_rtc_irq_data != 0)
-		return POLLIN | POLLRDNORM;
-	return 0;
-}
-
-#endif
-
-/*
- * Used to disable/enable interrupts, only RTC_UIE supported
- * We also clear out any old irq data after an ioctl() that
- * meddles with the interrupt enable/disable bits.
- */
-
-static inline void gen_clear_rtc_irq_bit(unsigned char bit)
-{
-#ifdef CONFIG_GEN_RTC_X
-	stop_rtc_timers = 1;
-	if (ttask_active){
-		del_timer_sync(&timer_task);
-		ttask_active = 0;
-	}
-	while (stask_active)
-		schedule();
-
-	spin_lock(&gen_rtc_lock);
-	irq_active = 0;
-	spin_unlock(&gen_rtc_lock);
-#endif
-}
-
-static inline int gen_set_rtc_irq_bit(unsigned char bit)
-{
-#ifdef CONFIG_GEN_RTC_X
-	spin_lock(&gen_rtc_lock);
-	if ( !irq_active ) {
-		irq_active = 1;
-		stop_rtc_timers = 0;
-		lostint = 0;
-		INIT_WORK(&genrtc_task, genrtc_troutine);
-		oldsecs = get_rtc_ss();
-		init_timer(&timer_task);
-
-		stask_active = 1;
-		if (schedule_work(&genrtc_task) == 0){
-			stask_active = 0;
-		}
-	}
-	spin_unlock(&gen_rtc_lock);
-	gen_rtc_irq_data = 0;
-	return 0;
-#else
-	return -EINVAL;
-#endif
-}
-
-static int gen_rtc_ioctl(struct file *file,
-			 unsigned int cmd, unsigned long arg)
-{
-	struct rtc_time wtime;
-	struct rtc_pll_info pll;
-	void __user *argp = (void __user *)arg;
-
-	switch (cmd) {
-
-	case RTC_PLL_GET:
-	    if (get_rtc_pll(&pll))
-	 	    return -EINVAL;
-	    else
-		    return copy_to_user(argp, &pll, sizeof pll) ? -EFAULT : 0;
-
-	case RTC_PLL_SET:
-		if (!capable(CAP_SYS_TIME))
-			return -EACCES;
-		if (copy_from_user(&pll, argp, sizeof(pll)))
-			return -EFAULT;
-	    return set_rtc_pll(&pll);
-
-	case RTC_UIE_OFF:	/* disable ints from RTC updates.	*/
-		gen_clear_rtc_irq_bit(RTC_UIE);
-		return 0;
-
-	case RTC_UIE_ON:	/* enable ints for RTC updates.	*/
-	        return gen_set_rtc_irq_bit(RTC_UIE);
-
-	case RTC_RD_TIME:	/* Read the time/date from RTC	*/
-		/* this doesn't get week-day, who cares */
-		memset(&wtime, 0, sizeof(wtime));
-		get_rtc_time(&wtime);
-
-		return copy_to_user(argp, &wtime, sizeof(wtime)) ? -EFAULT : 0;
-
-	case RTC_SET_TIME:	/* Set the RTC */
-	    {
-		int year;
-		unsigned char leap_yr;
-
-		if (!capable(CAP_SYS_TIME))
-			return -EACCES;
-
-		if (copy_from_user(&wtime, argp, sizeof(wtime)))
-			return -EFAULT;
-
-		year = wtime.tm_year + 1900;
-		leap_yr = ((!(year % 4) && (year % 100)) ||
-			   !(year % 400));
-
-		if ((wtime.tm_mon < 0 || wtime.tm_mon > 11) || (wtime.tm_mday < 1))
-			return -EINVAL;
-
-		if (wtime.tm_mday < 0 || wtime.tm_mday >
-		    (days_in_mo[wtime.tm_mon] + ((wtime.tm_mon == 1) && leap_yr)))
-			return -EINVAL;
-
-		if (wtime.tm_hour < 0 || wtime.tm_hour >= 24 ||
-		    wtime.tm_min < 0 || wtime.tm_min >= 60 ||
-		    wtime.tm_sec < 0 || wtime.tm_sec >= 60)
-			return -EINVAL;
-
-		return set_rtc_time(&wtime);
-	    }
-	}
-
-	return -EINVAL;
-}
-
-static long gen_rtc_unlocked_ioctl(struct file *file, unsigned int cmd,
-				   unsigned long arg)
-{
-	int ret;
-
-	mutex_lock(&gen_rtc_mutex);
-	ret = gen_rtc_ioctl(file, cmd, arg);
-	mutex_unlock(&gen_rtc_mutex);
-
-	return ret;
-}
-
-/*
- *	We enforce only one user at a time here with the open/close.
- *	Also clear the previous interrupt data on an open, and clean
- *	up things on a close.
- */
-
-static int gen_rtc_open(struct inode *inode, struct file *file)
-{
-	mutex_lock(&gen_rtc_mutex);
-	if (gen_rtc_status & RTC_IS_OPEN) {
-		mutex_unlock(&gen_rtc_mutex);
-		return -EBUSY;
-	}
-
-	gen_rtc_status |= RTC_IS_OPEN;
-	gen_rtc_irq_data = 0;
-	irq_active = 0;
-	mutex_unlock(&gen_rtc_mutex);
-
-	return 0;
-}
-
-static int gen_rtc_release(struct inode *inode, struct file *file)
-{
-	/*
-	 * Turn off all interrupts once the device is no longer
-	 * in use and clear the data.
-	 */
-
-	gen_clear_rtc_irq_bit(RTC_PIE|RTC_AIE|RTC_UIE);
-
-	gen_rtc_status &= ~RTC_IS_OPEN;
-	return 0;
-}
-
-
-#ifdef CONFIG_PROC_FS
-
-/*
- *	Info exported via "/proc/driver/rtc".
- */
-
-static int gen_rtc_proc_show(struct seq_file *m, void *v)
-{
-	struct rtc_time tm;
-	unsigned int flags;
-	struct rtc_pll_info pll;
-
-	flags = get_rtc_time(&tm);
-
-	seq_printf(m,
-		     "rtc_time\t: %02d:%02d:%02d\n"
-		     "rtc_date\t: %04d-%02d-%02d\n"
-		     "rtc_epoch\t: %04u\n",
-		     tm.tm_hour, tm.tm_min, tm.tm_sec,
-		     tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, 1900);
-
-	tm.tm_hour = tm.tm_min = tm.tm_sec = 0;
-
-	seq_puts(m, "alarm\t\t: ");
-	if (tm.tm_hour <= 24)
-		seq_printf(m, "%02d:", tm.tm_hour);
-	else
-		seq_puts(m, "**:");
-
-	if (tm.tm_min <= 59)
-		seq_printf(m, "%02d:", tm.tm_min);
-	else
-		seq_puts(m, "**:");
-
-	if (tm.tm_sec <= 59)
-		seq_printf(m, "%02d\n", tm.tm_sec);
-	else
-		seq_puts(m, "**\n");
-
-	seq_printf(m,
-		     "DST_enable\t: %s\n"
-		     "BCD\t\t: %s\n"
-		     "24hr\t\t: %s\n"
-		     "square_wave\t: %s\n"
-		     "alarm_IRQ\t: %s\n"
-		     "update_IRQ\t: %s\n"
-		     "periodic_IRQ\t: %s\n"
-		     "periodic_freq\t: %ld\n"
-		     "batt_status\t: %s\n",
-		     (flags & RTC_DST_EN) ? "yes" : "no",
-		     (flags & RTC_DM_BINARY) ? "no" : "yes",
-		     (flags & RTC_24H) ? "yes" : "no",
-		     (flags & RTC_SQWE) ? "yes" : "no",
-		     (flags & RTC_AIE) ? "yes" : "no",
-		     irq_active ? "yes" : "no",
-		     (flags & RTC_PIE) ? "yes" : "no",
-		     0L /* freq */,
-		     (flags & RTC_BATT_BAD) ? "bad" : "okay");
-	if (!get_rtc_pll(&pll))
-	    seq_printf(m,
-			 "PLL adjustment\t: %d\n"
-			 "PLL max +ve adjustment\t: %d\n"
-			 "PLL max -ve adjustment\t: %d\n"
-			 "PLL +ve adjustment factor\t: %d\n"
-			 "PLL -ve adjustment factor\t: %d\n"
-			 "PLL frequency\t: %ld\n",
-			 pll.pll_value,
-			 pll.pll_max,
-			 pll.pll_min,
-			 pll.pll_posmult,
-			 pll.pll_negmult,
-			 pll.pll_clock);
-	return 0;
-}
-
-static int gen_rtc_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, gen_rtc_proc_show, NULL);
-}
-
-static const struct file_operations gen_rtc_proc_fops = {
-	.open		= gen_rtc_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int __init gen_rtc_proc_init(void)
-{
-	struct proc_dir_entry *r;
-
-	r = proc_create("driver/rtc", 0, NULL, &gen_rtc_proc_fops);
-	if (!r)
-		return -ENOMEM;
-	return 0;
-}
-#else
-static inline int gen_rtc_proc_init(void) { return 0; }
-#endif /* CONFIG_PROC_FS */
-
-
-/*
- *	The various file operations we support.
- */
-
-static const struct file_operations gen_rtc_fops = {
-	.owner		= THIS_MODULE,
-#ifdef CONFIG_GEN_RTC_X
-	.read		= gen_rtc_read,
-	.poll		= gen_rtc_poll,
-#endif
-	.unlocked_ioctl	= gen_rtc_unlocked_ioctl,
-	.open		= gen_rtc_open,
-	.release	= gen_rtc_release,
-	.llseek		= noop_llseek,
-};
-
-static struct miscdevice rtc_gen_dev =
-{
-	.minor		= RTC_MINOR,
-	.name		= "rtc",
-	.fops		= &gen_rtc_fops,
-};
-
-static int __init rtc_generic_init(void)
-{
-	int retval;
-
-	printk(KERN_INFO "Generic RTC Driver v%s\n", RTC_VERSION);
-
-	retval = misc_register(&rtc_gen_dev);
-	if (retval < 0)
-		return retval;
-
-	retval = gen_rtc_proc_init();
-	if (retval) {
-		misc_deregister(&rtc_gen_dev);
-		return retval;
-	}
-
-	return 0;
-}
-
-static void __exit rtc_generic_exit(void)
-{
-	remove_proc_entry ("driver/rtc", NULL);
-	misc_deregister(&rtc_gen_dev);
-}
-
-
-module_init(rtc_generic_init);
-module_exit(rtc_generic_exit);
-
-MODULE_AUTHOR("Richard Zidlicky");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(RTC_MINOR);
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 18639e0cb6e2..e215f50794b6 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -5,6 +5,10 @@
 config RTC_LIB
 	bool
 
+config RTC_MC146818_LIB
+	bool
+	select RTC_LIB
+
 menuconfig RTC_CLASS
 	bool "Real Time Clock"
 	default n
@@ -574,10 +578,10 @@ config RTC_DRV_EM3027
 	  will be called rtc-em3027.
 
 config RTC_DRV_RV8803
-	tristate "Micro Crystal RV8803"
+	tristate "Micro Crystal RV8803, Epson RX8900"
 	help
-	  If you say yes here you get support for the Micro Crystal
-	  RV8803 RTC chips.
+	  If you say yes here you get support for the Micro Crystal RV8803 and
+	  Epson RX8900 RTC chips.
 
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-rv8803.
@@ -670,6 +674,18 @@ config RTC_DRV_DS1390
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-ds1390.
 
+config RTC_DRV_MAX6916
+	tristate "Maxim MAX6916"
+	help
+	  If you say yes here you will get support for the
+	  Maxim MAX6916 SPI RTC chip.
+
+	  This driver only supports the RTC feature, and not other chip
+	  features such as alarms.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-max6916.
+
 config RTC_DRV_R9701
 	tristate "Epson RTC-9701JE"
 	help
@@ -795,8 +811,9 @@ comment "Platform RTC drivers"
 
 config RTC_DRV_CMOS
 	tristate "PC-style 'CMOS'"
-	depends on X86 || ARM || M32R || PPC || MIPS || SPARC64
+	depends on X86 || ARM || M32R || PPC || MIPS || SPARC64 || MN10300
 	default y if X86
+	select RTC_MC146818_LIB
 	help
 	  Say "yes" here to get direct support for the real time clock
 	  found in every PC or ACPI-based system, and some other boards.
@@ -815,6 +832,7 @@ config RTC_DRV_CMOS
 config RTC_DRV_ALPHA
 	bool "Alpha PC-style CMOS"
 	depends on ALPHA
+	select RTC_MC146818_LIB
 	default y
 	help
 	  Direct support for the real-time clock found on every Alpha
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index ea2833723fa9..7cf7ad559c79 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_RTC_LIB)		+= rtc-lib.o
 obj-$(CONFIG_RTC_HCTOSYS)	+= hctosys.o
 obj-$(CONFIG_RTC_SYSTOHC)	+= systohc.o
 obj-$(CONFIG_RTC_CLASS)		+= rtc-core.o
+obj-$(CONFIG_RTC_MC146818_LIB)	+= rtc-mc146818-lib.o
 rtc-core-y			:= class.o interface.o
 
 ifdef CONFIG_RTC_DRV_EFI
@@ -85,6 +86,7 @@ obj-$(CONFIG_RTC_DRV_M48T59)	+= rtc-m48t59.o
 obj-$(CONFIG_RTC_DRV_M48T86)	+= rtc-m48t86.o
 obj-$(CONFIG_RTC_DRV_MAX6900)	+= rtc-max6900.o
 obj-$(CONFIG_RTC_DRV_MAX6902)	+= rtc-max6902.o
+obj-$(CONFIG_RTC_DRV_MAX6916)	+= rtc-max6916.o
 obj-$(CONFIG_RTC_DRV_MAX77686)	+= rtc-max77686.o
 obj-$(CONFIG_RTC_DRV_MAX8907)	+= rtc-max8907.o
 obj-$(CONFIG_RTC_DRV_MAX8925)	+= rtc-max8925.o
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index 9ef5f6f89f98..84a52db9b05f 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -104,7 +104,17 @@ static int rtc_read_alarm_internal(struct rtc_device *rtc, struct rtc_wkalrm *al
 	else if (!rtc->ops->read_alarm)
 		err = -EINVAL;
 	else {
-		memset(alarm, 0, sizeof(struct rtc_wkalrm));
+		alarm->enabled = 0;
+		alarm->pending = 0;
+		alarm->time.tm_sec = -1;
+		alarm->time.tm_min = -1;
+		alarm->time.tm_hour = -1;
+		alarm->time.tm_mday = -1;
+		alarm->time.tm_mon = -1;
+		alarm->time.tm_year = -1;
+		alarm->time.tm_wday = -1;
+		alarm->time.tm_yday = -1;
+		alarm->time.tm_isdst = -1;
 		err = rtc->ops->read_alarm(rtc->dev.parent, alarm);
 	}
 
@@ -383,7 +393,7 @@ int rtc_initialize_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
 	rtc->aie_timer.node.expires = rtc_tm_to_ktime(alarm->time);
 	rtc->aie_timer.period = ktime_set(0, 0);
 
-	/* Alarm has to be enabled & in the futrure for us to enqueue it */
+	/* Alarm has to be enabled & in the future for us to enqueue it */
 	if (alarm->enabled && (rtc_tm_to_ktime(now).tv64 <
 			 rtc->aie_timer.node.expires.tv64)) {
 
@@ -395,8 +405,6 @@ int rtc_initialize_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
 }
 EXPORT_SYMBOL_GPL(rtc_initialize_alarm);
 
-
-
 int rtc_alarm_irq_enable(struct rtc_device *rtc, unsigned int enabled)
 {
 	int err = mutex_lock_interruptible(&rtc->ops_lock);
@@ -748,9 +756,23 @@ EXPORT_SYMBOL_GPL(rtc_irq_set_freq);
  */
 static int rtc_timer_enqueue(struct rtc_device *rtc, struct rtc_timer *timer)
 {
+	struct timerqueue_node *next = timerqueue_getnext(&rtc->timerqueue);
+	struct rtc_time tm;
+	ktime_t now;
+
 	timer->enabled = 1;
+	__rtc_read_time(rtc, &tm);
+	now = rtc_tm_to_ktime(tm);
+
+	/* Skip over expired timers */
+	while (next) {
+		if (next->expires.tv64 >= now.tv64)
+			break;
+		next = timerqueue_iterate_next(next);
+	}
+
 	timerqueue_add(&rtc->timerqueue, &timer->node);
-	if (&timer->node == timerqueue_getnext(&rtc->timerqueue)) {
+	if (!next) {
 		struct rtc_wkalrm alarm;
 		int err;
 		alarm.time = rtc_ktime_to_tm(timer->node.expires);
diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
index ba0d61934d35..fea9a60b06cf 100644
--- a/drivers/rtc/rtc-abx80x.c
+++ b/drivers/rtc/rtc-abx80x.c
@@ -643,17 +643,15 @@ static int abx80x_probe(struct i2c_client *client,
 		return err;
 	}
 
-	err = devm_add_action(&client->dev, rtc_calib_remove_sysfs_group,
-			      &client->dev);
-	if (err) {
-		rtc_calib_remove_sysfs_group(&client->dev);
+	err = devm_add_action_or_reset(&client->dev,
+				       rtc_calib_remove_sysfs_group,
+				       &client->dev);
+	if (err)
 		dev_err(&client->dev,
 			"Failed to add sysfs cleanup action: %d\n",
 			err);
-		return err;
-	}
 
-	return 0;
+	return err;
 }
 
 static int abx80x_remove(struct i2c_client *client)
diff --git a/drivers/rtc/rtc-asm9260.c b/drivers/rtc/rtc-asm9260.c
index 355fdb97a006..5219916ce11d 100644
--- a/drivers/rtc/rtc-asm9260.c
+++ b/drivers/rtc/rtc-asm9260.c
@@ -343,7 +343,6 @@ static struct platform_driver asm9260_rtc_driver = {
 	.remove		= asm9260_rtc_remove,
 	.driver		= {
 		.name	= "asm9260-rtc",
-		.owner	= THIS_MODULE,
 		.of_match_table = asm9260_dt_ids,
 	},
 };
diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
index 99732e6f8c3b..7418a763ce52 100644
--- a/drivers/rtc/rtc-at91sam9.c
+++ b/drivers/rtc/rtc-at91sam9.c
@@ -375,6 +375,7 @@ static int at91_rtc_probe(struct platform_device *pdev)
 	if (!rtc)
 		return -ENOMEM;
 
+	spin_lock_init(&rtc->lock);
 	rtc->irq = irq;
 
 	/* platform setup code should have handled this; sigh */
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index fbe9c72438e1..43745cac0141 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -43,7 +43,7 @@
 #include <linux/of_platform.h>
 
 /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */
-#include <asm-generic/rtc.h>
+#include <linux/mc146818rtc.h>
 
 struct cmos_rtc {
 	struct rtc_device	*rtc;
@@ -190,10 +190,10 @@ static inline void cmos_write_bank2(unsigned char val, unsigned char addr)
 static int cmos_read_time(struct device *dev, struct rtc_time *t)
 {
 	/* REVISIT:  if the clock has a "century" register, use
-	 * that instead of the heuristic in get_rtc_time().
+	 * that instead of the heuristic in mc146818_get_time().
 	 * That'll make Y3K compatility (year > 2070) easy!
 	 */
-	get_rtc_time(t);
+	mc146818_get_time(t);
 	return 0;
 }
 
@@ -205,7 +205,7 @@ static int cmos_set_time(struct device *dev, struct rtc_time *t)
 	 * takes effect exactly 500ms after we write the register.
 	 * (Also queueing and other delays before we get this far.)
 	 */
-	return set_rtc_time(t);
+	return mc146818_set_time(t);
 }
 
 static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t)
@@ -220,8 +220,6 @@ static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t)
 	 * Some also support day and month, for alarms up to a year in
 	 * the future.
 	 */
-	t->time.tm_mday = -1;
-	t->time.tm_mon = -1;
 
 	spin_lock_irq(&rtc_lock);
 	t->time.tm_sec = CMOS_READ(RTC_SECONDS_ALARM);
@@ -272,7 +270,6 @@ static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t)
 			}
 		}
 	}
-	t->time.tm_year = -1;
 
 	t->enabled = !!(rtc_control & RTC_AIE);
 	t->pending = 0;
@@ -630,7 +627,7 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
 	address_space = 64;
 #elif defined(__i386__) || defined(__x86_64__) || defined(__arm__) \
 			|| defined(__sparc__) || defined(__mips__) \
-			|| defined(__powerpc__)
+			|| defined(__powerpc__) || defined(CONFIG_MN10300)
 	address_space = 128;
 #else
 #warning Assuming 128 bytes of RTC+NVRAM address space, not 64 bytes.
@@ -1142,14 +1139,14 @@ static __init void cmos_of_init(struct platform_device *pdev)
 	if (val)
 		CMOS_WRITE(be32_to_cpup(val), RTC_FREQ_SELECT);
 
-	get_rtc_time(&time);
+	cmos_read_time(&pdev->dev, &time);
 	ret = rtc_valid_tm(&time);
 	if (ret) {
 		struct rtc_time def_time = {
 			.tm_year = 1,
 			.tm_mday = 1,
 		};
-		set_rtc_time(&def_time);
+		cmos_set_time(&pdev->dev, &def_time);
 	}
 }
 #else
diff --git a/drivers/rtc/rtc-da9052.c b/drivers/rtc/rtc-da9052.c
index a20bcf0e33cd..4273377562ec 100644
--- a/drivers/rtc/rtc-da9052.c
+++ b/drivers/rtc/rtc-da9052.c
@@ -85,6 +85,7 @@ static int da9052_read_alarm(struct da9052_rtc *rtc, struct rtc_time *rtc_tm)
 			rtc_tm->tm_mday = v[0][2] & DA9052_RTC_DAY;
 			rtc_tm->tm_hour = v[0][1] & DA9052_RTC_HOUR;
 			rtc_tm->tm_min  = v[0][0] & DA9052_RTC_MIN;
+			rtc_tm->tm_sec = 0;
 
 			ret = rtc_valid_tm(rtc_tm);
 			return ret;
diff --git a/drivers/rtc/rtc-da9055.c b/drivers/rtc/rtc-da9055.c
index 7ec0872d5e3b..678af8648c45 100644
--- a/drivers/rtc/rtc-da9055.c
+++ b/drivers/rtc/rtc-da9055.c
@@ -74,6 +74,7 @@ static int da9055_read_alarm(struct da9055 *da9055, struct rtc_time *rtc_tm)
 	rtc_tm->tm_mday = v[2] & DA9055_RTC_ALM_DAY;
 	rtc_tm->tm_hour = v[1] & DA9055_RTC_ALM_HOUR;
 	rtc_tm->tm_min  = v[0] & DA9055_RTC_ALM_MIN;
+	rtc_tm->tm_sec = 0;
 
 	return rtc_valid_tm(rtc_tm);
 }
diff --git a/drivers/rtc/rtc-davinci.c b/drivers/rtc/rtc-davinci.c
index c5432bf64e1c..dba60c1dfce2 100644
--- a/drivers/rtc/rtc-davinci.c
+++ b/drivers/rtc/rtc-davinci.c
@@ -388,6 +388,8 @@ static int davinci_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
 	u8 day0, day1;
 	unsigned long flags;
 
+	alm->time.tm_sec = 0;
+
 	spin_lock_irqsave(&davinci_rtc_lock, flags);
 
 	davinci_rtcss_calendar_wait(davinci_rtc);
diff --git a/drivers/rtc/rtc-ds1286.c b/drivers/rtc/rtc-ds1286.c
index 756e509f6ed2..ef75c349dff9 100644
--- a/drivers/rtc/rtc-ds1286.c
+++ b/drivers/rtc/rtc-ds1286.c
@@ -16,7 +16,7 @@
 #include <linux/rtc.h>
 #include <linux/platform_device.h>
 #include <linux/bcd.h>
-#include <linux/ds1286.h>
+#include <linux/rtc/ds1286.h>
 #include <linux/io.h>
 #include <linux/slab.h>
 
diff --git a/drivers/rtc/rtc-ds1305.c b/drivers/rtc/rtc-ds1305.c
index 8e41c4613e51..72b22935eb62 100644
--- a/drivers/rtc/rtc-ds1305.c
+++ b/drivers/rtc/rtc-ds1305.c
@@ -313,13 +313,6 @@ static int ds1305_get_alarm(struct device *dev, struct rtc_wkalrm *alm)
 	alm->time.tm_sec = bcd2bin(buf[DS1305_SEC]);
 	alm->time.tm_min = bcd2bin(buf[DS1305_MIN]);
 	alm->time.tm_hour = bcd2hour(buf[DS1305_HOUR]);
-	alm->time.tm_mday = -1;
-	alm->time.tm_mon = -1;
-	alm->time.tm_year = -1;
-	/* next three fields are unused by Linux */
-	alm->time.tm_wday = -1;
-	alm->time.tm_mday = -1;
-	alm->time.tm_isdst = -1;
 
 	return 0;
 }
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 821d9c089cdb..8e1c5cb6ece6 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -482,11 +482,6 @@ static int ds1337_read_alarm(struct device *dev, struct rtc_wkalrm *t)
 	t->time.tm_min = bcd2bin(ds1307->regs[1] & 0x7f);
 	t->time.tm_hour = bcd2bin(ds1307->regs[2] & 0x3f);
 	t->time.tm_mday = bcd2bin(ds1307->regs[3] & 0x3f);
-	t->time.tm_mon = -1;
-	t->time.tm_year = -1;
-	t->time.tm_wday = -1;
-	t->time.tm_yday = -1;
-	t->time.tm_isdst = -1;
 
 	/* ... and status */
 	t->enabled = !!(ds1307->regs[7] & DS1337_BIT_A1IE);
@@ -602,6 +597,8 @@ static const struct rtc_class_ops ds13xx_rtc_ops = {
  * Alarm support for mcp794xx devices.
  */
 
+#define MCP794XX_REG_WEEKDAY		0x3
+#define MCP794XX_REG_WEEKDAY_WDAY_MASK	0x7
 #define MCP794XX_REG_CONTROL		0x07
 #	define MCP794XX_BIT_ALM0_EN	0x10
 #	define MCP794XX_BIT_ALM1_EN	0x20
@@ -1231,13 +1228,16 @@ static int ds1307_probe(struct i2c_client *client,
 {
 	struct ds1307		*ds1307;
 	int			err = -ENODEV;
-	int			tmp;
+	int			tmp, wday;
 	struct chip_desc	*chip = &chips[id->driver_data];
 	struct i2c_adapter	*adapter = to_i2c_adapter(client->dev.parent);
 	bool			want_irq = false;
 	bool			ds1307_can_wakeup_device = false;
 	unsigned char		*buf;
 	struct ds1307_platform_data *pdata = dev_get_platdata(&client->dev);
+	struct rtc_time		tm;
+	unsigned long		timestamp;
+
 	irq_handler_t	irq_handler = ds1307_irq;
 
 	static const int	bbsqi_bitpos[] = {
@@ -1526,6 +1526,27 @@ read_rtc:
 				bin2bcd(tmp));
 	}
 
+	/*
+	 * Some IPs have weekday reset value = 0x1 which might not correct
+	 * hence compute the wday using the current date/month/year values
+	 */
+	ds1307_get_time(&client->dev, &tm);
+	wday = tm.tm_wday;
+	timestamp = rtc_tm_to_time64(&tm);
+	rtc_time64_to_tm(timestamp, &tm);
+
+	/*
+	 * Check if reset wday is different from the computed wday
+	 * If different then set the wday which we computed using
+	 * timestamp
+	 */
+	if (wday != tm.tm_wday) {
+		wday = i2c_smbus_read_byte_data(client, MCP794XX_REG_WEEKDAY);
+		wday = wday & ~MCP794XX_REG_WEEKDAY_WDAY_MASK;
+		wday = wday | (tm.tm_wday + 1);
+		i2c_smbus_write_byte_data(client, MCP794XX_REG_WEEKDAY, wday);
+	}
+
 	if (want_irq) {
 		device_set_wakeup_capable(&client->dev, true);
 		set_bit(HAS_ALARM, &ds1307->flags);
diff --git a/drivers/rtc/rtc-ds1343.c b/drivers/rtc/rtc-ds1343.c
index 23fa9f0cb5e3..895fbeeb47fe 100644
--- a/drivers/rtc/rtc-ds1343.c
+++ b/drivers/rtc/rtc-ds1343.c
@@ -504,12 +504,6 @@ static int ds1343_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	alarm->time.tm_hour = priv->alarm_hour < 0 ? 0 : priv->alarm_hour;
 	alarm->time.tm_mday = priv->alarm_mday < 0 ? 0 : priv->alarm_mday;
 
-	alarm->time.tm_mon = -1;
-	alarm->time.tm_year = -1;
-	alarm->time.tm_wday = -1;
-	alarm->time.tm_yday = -1;
-	alarm->time.tm_isdst = -1;
-
 out:
 	mutex_unlock(&priv->mutex);
 	return res;
diff --git a/drivers/rtc/rtc-ds1685.c b/drivers/rtc/rtc-ds1685.c
index b3ce3c652fcd..ed43b4311660 100644
--- a/drivers/rtc/rtc-ds1685.c
+++ b/drivers/rtc/rtc-ds1685.c
@@ -103,6 +103,26 @@ ds1685_rtc_bin2bcd(struct ds1685_priv *rtc, u8 val, u8 bin_mask, u8 bcd_mask)
 }
 
 /**
+ * s1685_rtc_check_mday - check validity of the day of month.
+ * @rtc: pointer to the ds1685 rtc structure.
+ * @mday: day of month.
+ *
+ * Returns -EDOM if the day of month is not within 1..31 range.
+ */
+static inline int
+ds1685_rtc_check_mday(struct ds1685_priv *rtc, u8 mday)
+{
+	if (rtc->bcd_mode) {
+		if (mday < 0x01 || mday > 0x31 || (mday & 0x0f) > 0x09)
+			return -EDOM;
+	} else {
+		if (mday < 1 || mday > 31)
+			return -EDOM;
+	}
+	return 0;
+}
+
+/**
  * ds1685_rtc_switch_to_bank0 - switch the rtc to bank 0.
  * @rtc: pointer to the ds1685 rtc structure.
  */
@@ -377,6 +397,7 @@ ds1685_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
 	u8 seconds, minutes, hours, mday, ctrlb, ctrlc;
+	int ret;
 
 	/* Fetch the alarm info from the RTC alarm registers. */
 	ds1685_rtc_begin_data_access(rtc);
@@ -388,34 +409,29 @@ ds1685_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	ctrlc	= rtc->read(rtc, RTC_CTRL_C);
 	ds1685_rtc_end_data_access(rtc);
 
-	/* Check month date. */
-	if (!(mday >= 1) && (mday <= 31))
-		return -EDOM;
+	/* Check the month date for validity. */
+	ret = ds1685_rtc_check_mday(rtc, mday);
+	if (ret)
+		return ret;
 
 	/*
 	 * Check the three alarm bytes.
 	 *
 	 * The Linux RTC system doesn't support the "don't care" capability
 	 * of this RTC chip.  We check for it anyways in case support is
-	 * added in the future.
+	 * added in the future and only assign when we care.
 	 */
-	if (unlikely(seconds >= 0xc0))
-		alrm->time.tm_sec = -1;
-	else
+	if (likely(seconds < 0xc0))
 		alrm->time.tm_sec = ds1685_rtc_bcd2bin(rtc, seconds,
 						       RTC_SECS_BCD_MASK,
 						       RTC_SECS_BIN_MASK);
 
-	if (unlikely(minutes >= 0xc0))
-		alrm->time.tm_min = -1;
-	else
+	if (likely(minutes < 0xc0))
 		alrm->time.tm_min = ds1685_rtc_bcd2bin(rtc, minutes,
 						       RTC_MINS_BCD_MASK,
 						       RTC_MINS_BIN_MASK);
 
-	if (unlikely(hours >= 0xc0))
-		alrm->time.tm_hour = -1;
-	else
+	if (likely(hours < 0xc0))
 		alrm->time.tm_hour = ds1685_rtc_bcd2bin(rtc, hours,
 							RTC_HRS_24_BCD_MASK,
 							RTC_HRS_24_BIN_MASK);
@@ -423,11 +439,6 @@ ds1685_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	/* Write the data to rtc_wkalrm. */
 	alrm->time.tm_mday = ds1685_rtc_bcd2bin(rtc, mday, RTC_MDAY_BCD_MASK,
 						RTC_MDAY_BIN_MASK);
-	alrm->time.tm_mon = -1;
-	alrm->time.tm_year = -1;
-	alrm->time.tm_wday = -1;
-	alrm->time.tm_yday = -1;
-	alrm->time.tm_isdst = -1;
 	alrm->enabled = !!(ctrlb & RTC_CTRL_B_AIE);
 	alrm->pending = !!(ctrlc & RTC_CTRL_C_AF);
 
@@ -445,6 +456,7 @@ ds1685_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct ds1685_priv *rtc = platform_get_drvdata(pdev);
 	u8 ctrlb, seconds, minutes, hours, mday;
+	int ret;
 
 	/* Fetch the alarm info and convert to BCD. */
 	seconds	= ds1685_rtc_bin2bcd(rtc, alrm->time.tm_sec,
@@ -461,8 +473,9 @@ ds1685_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 				     RTC_MDAY_BCD_MASK);
 
 	/* Check the month date for validity. */
-	if (!(mday >= 1) && (mday <= 31))
-		return -EDOM;
+	ret = ds1685_rtc_check_mday(rtc, mday);
+	if (ret)
+		return ret;
 
 	/*
 	 * Check the three alarm bytes.
diff --git a/drivers/rtc/rtc-ds2404.c b/drivers/rtc/rtc-ds2404.c
index 16310fe79d76..9a1582ed7070 100644
--- a/drivers/rtc/rtc-ds2404.c
+++ b/drivers/rtc/rtc-ds2404.c
@@ -13,7 +13,7 @@
 #include <linux/rtc.h>
 #include <linux/types.h>
 #include <linux/bcd.h>
-#include <linux/rtc-ds2404.h>
+#include <linux/platform_data/rtc-ds2404.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
diff --git a/drivers/rtc/rtc-ds3232.c b/drivers/rtc/rtc-ds3232.c
index 04fbd7fffd0d..b1f20d8c358f 100644
--- a/drivers/rtc/rtc-ds3232.c
+++ b/drivers/rtc/rtc-ds3232.c
@@ -197,12 +197,6 @@ static int ds3232_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	alarm->time.tm_hour = bcd2bin(buf[2] & 0x7F);
 	alarm->time.tm_mday = bcd2bin(buf[3] & 0x7F);
 
-	alarm->time.tm_mon = -1;
-	alarm->time.tm_year = -1;
-	alarm->time.tm_wday = -1;
-	alarm->time.tm_yday = -1;
-	alarm->time.tm_isdst = -1;
-
 	alarm->enabled = !!(control & DS3232_REG_CR_A1IE);
 	alarm->pending = !!(stat & DS3232_REG_SR_A1F);
 
diff --git a/drivers/rtc/rtc-efi.c b/drivers/rtc/rtc-efi.c
index 96d38609d803..0130afd7fe88 100644
--- a/drivers/rtc/rtc-efi.c
+++ b/drivers/rtc/rtc-efi.c
@@ -259,6 +259,12 @@ static const struct rtc_class_ops efi_rtc_ops = {
 static int __init efi_rtc_probe(struct platform_device *dev)
 {
 	struct rtc_device *rtc;
+	efi_time_t eft;
+	efi_time_cap_t cap;
+
+	/* First check if the RTC is usable */
+	if (efi.get_time(&eft, &cap) != EFI_SUCCESS)
+		return -ENODEV;
 
 	rtc = devm_rtc_device_register(&dev->dev, "rtc-efi", &efi_rtc_ops,
 					THIS_MODULE);
diff --git a/drivers/rtc/rtc-generic.c b/drivers/rtc/rtc-generic.c
index d726c6aa96a8..1bf5d2347928 100644
--- a/drivers/rtc/rtc-generic.c
+++ b/drivers/rtc/rtc-generic.c
@@ -9,44 +9,10 @@
 #include <linux/platform_device.h>
 #include <linux/rtc.h>
 
-#if defined(CONFIG_M68K) || defined(CONFIG_PARISC) || \
-    defined(CONFIG_PPC) || defined(CONFIG_SUPERH32)
-#include <asm/rtc.h>
-
-static int generic_get_time(struct device *dev, struct rtc_time *tm)
-{
-	unsigned int ret = get_rtc_time(tm);
-
-	if (ret & RTC_BATT_BAD)
-		return -EOPNOTSUPP;
-
-	return rtc_valid_tm(tm);
-}
-
-static int generic_set_time(struct device *dev, struct rtc_time *tm)
-{
-	if (set_rtc_time(tm) < 0)
-		return -EOPNOTSUPP;
-
-	return 0;
-}
-
-static const struct rtc_class_ops generic_rtc_ops = {
-	.read_time = generic_get_time,
-	.set_time = generic_set_time,
-};
-#else
-#define generic_rtc_ops *(struct rtc_class_ops*)NULL
-#endif
-
 static int __init generic_rtc_probe(struct platform_device *dev)
 {
 	struct rtc_device *rtc;
-	const struct rtc_class_ops *ops;
-
-	ops = dev_get_platdata(&dev->dev);
-	if (!ops)
-		ops = &generic_rtc_ops;
+	const struct rtc_class_ops *ops = dev_get_platdata(&dev->dev);
 
 	rtc = devm_rtc_device_register(&dev->dev, "rtc-generic",
 					ops, THIS_MODULE);
diff --git a/drivers/rtc/rtc-hym8563.c b/drivers/rtc/rtc-hym8563.c
index 207270376b55..e5ad527cb75e 100644
--- a/drivers/rtc/rtc-hym8563.c
+++ b/drivers/rtc/rtc-hym8563.c
@@ -198,7 +198,7 @@ static int hym8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
 		return ret;
 
 	/* The alarm only has a minute accuracy */
-	alm_tm->tm_sec = -1;
+	alm_tm->tm_sec = 0;
 
 	alm_tm->tm_min = (buf[0] & HYM8563_ALM_BIT_DISABLE) ?
 					-1 :
@@ -213,9 +213,6 @@ static int hym8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
 					-1 :
 					bcd2bin(buf[3] & HYM8563_WEEKDAY_MASK);
 
-	alm_tm->tm_mon = -1;
-	alm_tm->tm_year = -1;
-
 	ret = i2c_smbus_read_byte_data(client, HYM8563_CTL2);
 	if (ret < 0)
 		return ret;
diff --git a/drivers/rtc/rtc-isl12057.c b/drivers/rtc/rtc-isl12057.c
index 54328d4ac0d3..0e7f0f52bfe4 100644
--- a/drivers/rtc/rtc-isl12057.c
+++ b/drivers/rtc/rtc-isl12057.c
@@ -245,8 +245,7 @@ static int isl12057_rtc_update_alarm(struct device *dev, int enable)
 static int isl12057_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 {
 	struct isl12057_rtc_data *data = dev_get_drvdata(dev);
-	struct rtc_time rtc_tm, *alarm_tm = &alarm->time;
-	unsigned long rtc_secs, alarm_secs;
+	struct rtc_time *alarm_tm = &alarm->time;
 	u8 regs[ISL12057_A1_SEC_LEN];
 	unsigned int ir;
 	int ret;
@@ -264,36 +263,6 @@ static int isl12057_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	alarm_tm->tm_min  = bcd2bin(regs[1] & 0x7f);
 	alarm_tm->tm_hour = bcd2bin(regs[2] & 0x3f);
 	alarm_tm->tm_mday = bcd2bin(regs[3] & 0x3f);
-	alarm_tm->tm_wday = -1;
-
-	/*
-	 * The alarm section does not store year/month. We use the ones in rtc
-	 * section as a basis and increment month and then year if needed to get
-	 * alarm after current time.
-	 */
-	ret = _isl12057_rtc_read_time(dev, &rtc_tm);
-	if (ret)
-		goto err_unlock;
-
-	alarm_tm->tm_year = rtc_tm.tm_year;
-	alarm_tm->tm_mon = rtc_tm.tm_mon;
-
-	ret = rtc_tm_to_time(&rtc_tm, &rtc_secs);
-	if (ret)
-		goto err_unlock;
-
-	ret = rtc_tm_to_time(alarm_tm, &alarm_secs);
-	if (ret)
-		goto err_unlock;
-
-	if (alarm_secs < rtc_secs) {
-		if (alarm_tm->tm_mon == 11) {
-			alarm_tm->tm_mon = 0;
-			alarm_tm->tm_year += 1;
-		} else {
-			alarm_tm->tm_mon += 1;
-		}
-	}
 
 	ret = regmap_read(data->regmap, ISL12057_REG_INT, &ir);
 	if (ret) {
diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c
index d1bf93a87200..58698d21c2c3 100644
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -244,7 +244,7 @@ static int m41t80_alarm_irq_enable(struct device *dev, unsigned int enabled)
 
 	retval = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, flags);
 	if (retval < 0) {
-		dev_info(dev, "Unable to enable alarm IRQ %d\n", retval);
+		dev_err(dev, "Unable to enable alarm IRQ %d\n", retval);
 		return retval;
 	}
 	return 0;
@@ -320,10 +320,8 @@ static int m41t80_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	alrm->time.tm_sec  = bcd2bin(alarmvals[4] & 0x7f);
 	alrm->time.tm_min  = bcd2bin(alarmvals[3] & 0x7f);
 	alrm->time.tm_hour = bcd2bin(alarmvals[2] & 0x3f);
-	alrm->time.tm_wday = -1;
 	alrm->time.tm_mday = bcd2bin(alarmvals[1] & 0x3f);
 	alrm->time.tm_mon  = bcd2bin(alarmvals[0] & 0x3f);
-	alrm->time.tm_year = -1;
 
 	alrm->enabled = !!(alarmvals[0] & M41T80_ALMON_AFE);
 	alrm->pending = (flags & M41T80_FLAGS_AF) && alrm->enabled;
@@ -337,6 +335,30 @@ static struct rtc_class_ops m41t80_rtc_ops = {
 	.proc = m41t80_rtc_proc,
 };
 
+#ifdef CONFIG_PM_SLEEP
+static int m41t80_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (client->irq >= 0 && device_may_wakeup(dev))
+		enable_irq_wake(client->irq);
+
+	return 0;
+}
+
+static int m41t80_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (client->irq >= 0 && device_may_wakeup(dev))
+		disable_irq_wake(client->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(m41t80_pm, m41t80_suspend, m41t80_resume);
+
 static ssize_t flags_show(struct device *dev,
 			  struct device_attribute *attr, char *buf)
 {
@@ -831,10 +853,9 @@ static int m41t80_probe(struct i2c_client *client,
 		return rc;
 	}
 
-	rc = devm_add_action(&client->dev, m41t80_remove_sysfs_group,
-			     &client->dev);
+	rc = devm_add_action_or_reset(&client->dev, m41t80_remove_sysfs_group,
+				      &client->dev);
 	if (rc) {
-		m41t80_remove_sysfs_group(&client->dev);
 		dev_err(&client->dev,
 			"Failed to add sysfs cleanup action: %d\n", rc);
 		return rc;
@@ -873,6 +894,7 @@ static int m41t80_remove(struct i2c_client *client)
 static struct i2c_driver m41t80_driver = {
 	.driver = {
 		.name = "rtc-m41t80",
+		.pm = &m41t80_pm,
 	},
 	.probe = m41t80_probe,
 	.remove = m41t80_remove,
diff --git a/drivers/rtc/rtc-m48t86.c b/drivers/rtc/rtc-m48t86.c
index f72b91f2501f..0eeb5714c00f 100644
--- a/drivers/rtc/rtc-m48t86.c
+++ b/drivers/rtc/rtc-m48t86.c
@@ -16,7 +16,7 @@
 #include <linux/module.h>
 #include <linux/rtc.h>
 #include <linux/platform_device.h>
-#include <linux/m48t86.h>
+#include <linux/platform_data/rtc-m48t86.h>
 #include <linux/bcd.h>
 
 #define M48T86_REG_SEC		0x00
diff --git a/drivers/rtc/rtc-max6916.c b/drivers/rtc/rtc-max6916.c
new file mode 100644
index 000000000000..623ab27b2757
--- /dev/null
+++ b/drivers/rtc/rtc-max6916.c
@@ -0,0 +1,164 @@
+/* rtc-max6916.c
+ *
+ * Driver for MAXIM  max6916 Low Current, SPI Compatible
+ * Real Time Clock
+ *
+ * Author : Venkat Prashanth B U <venkat.prashanth2498@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/spi/spi.h>
+#include <linux/bcd.h>
+
+/* Registers in max6916 rtc */
+
+#define MAX6916_SECONDS_REG	0x01
+#define MAX6916_MINUTES_REG	0x02
+#define MAX6916_HOURS_REG	0x03
+#define MAX6916_DATE_REG	0x04
+#define MAX6916_MONTH_REG	0x05
+#define MAX6916_DAY_REG	0x06
+#define MAX6916_YEAR_REG	0x07
+#define MAX6916_CONTROL_REG	0x08
+#define MAX6916_STATUS_REG	0x0C
+#define MAX6916_CLOCK_BURST	0x3F
+
+static int max6916_read_reg(struct device *dev, unsigned char address,
+			    unsigned char *data)
+{
+	struct spi_device *spi = to_spi_device(dev);
+
+	*data = address | 0x80;
+
+	return spi_write_then_read(spi, data, 1, data, 1);
+}
+
+static int max6916_write_reg(struct device *dev, unsigned char address,
+			     unsigned char data)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	unsigned char buf[2];
+
+	buf[0] = address & 0x7F;
+	buf[1] = data;
+
+	return spi_write_then_read(spi, buf, 2, NULL, 0);
+}
+
+static int max6916_read_time(struct device *dev, struct rtc_time *dt)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	int err;
+	unsigned char buf[8];
+
+	buf[0] = MAX6916_CLOCK_BURST | 0x80;
+
+	err = spi_write_then_read(spi, buf, 1, buf, 8);
+
+	if (err)
+		return err;
+
+	dt->tm_sec = bcd2bin(buf[0]);
+	dt->tm_min = bcd2bin(buf[1]);
+	dt->tm_hour = bcd2bin(buf[2] & 0x3F);
+	dt->tm_mday = bcd2bin(buf[3]);
+	dt->tm_mon = bcd2bin(buf[4]) - 1;
+	dt->tm_wday = bcd2bin(buf[5]) - 1;
+	dt->tm_year = bcd2bin(buf[6]) + 100;
+
+	return rtc_valid_tm(dt);
+}
+
+static int max6916_set_time(struct device *dev, struct rtc_time *dt)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	unsigned char buf[9];
+
+	if (dt->tm_year < 100 || dt->tm_year > 199) {
+		dev_err(&spi->dev, "Year must be between 2000 and 2099. It's %d.\n",
+			dt->tm_year + 1900);
+	return -EINVAL;
+	}
+
+	buf[0] = MAX6916_CLOCK_BURST & 0x7F;
+	buf[1] = bin2bcd(dt->tm_sec);
+	buf[2] = bin2bcd(dt->tm_min);
+	buf[3] = (bin2bcd(dt->tm_hour) & 0X3F);
+	buf[4] = bin2bcd(dt->tm_mday);
+	buf[5] = bin2bcd(dt->tm_mon + 1);
+	buf[6] = bin2bcd(dt->tm_wday + 1);
+	buf[7] = bin2bcd(dt->tm_year % 100);
+	buf[8] = bin2bcd(0x00);
+
+	/* write the rtc settings */
+	return spi_write_then_read(spi, buf, 9, NULL, 0);
+}
+
+static const struct rtc_class_ops max6916_rtc_ops = {
+	.read_time = max6916_read_time,
+	.set_time = max6916_set_time,
+};
+
+static int max6916_probe(struct spi_device *spi)
+{
+	struct rtc_device *rtc;
+	unsigned char data;
+	int res;
+
+	/* spi setup with max6916 in mode 3 and bits per word as 8 */
+	spi->mode = SPI_MODE_3;
+	spi->bits_per_word = 8;
+	spi_setup(spi);
+
+	/* RTC Settings */
+	res = max6916_read_reg(&spi->dev, MAX6916_SECONDS_REG, &data);
+	if (res)
+		return res;
+
+	/* Disable the write protect of rtc */
+	max6916_read_reg(&spi->dev, MAX6916_CONTROL_REG, &data);
+	data = data & ~(1 << 7);
+	max6916_write_reg(&spi->dev, MAX6916_CONTROL_REG, data);
+
+	/*Enable oscillator,disable oscillator stop flag, glitch filter*/
+	max6916_read_reg(&spi->dev, MAX6916_STATUS_REG, &data);
+	data = data & 0x1B;
+	max6916_write_reg(&spi->dev, MAX6916_STATUS_REG, data);
+
+	/* display the settings */
+	max6916_read_reg(&spi->dev, MAX6916_CONTROL_REG, &data);
+	dev_info(&spi->dev, "MAX6916 RTC CTRL Reg = 0x%02x\n", data);
+
+	max6916_read_reg(&spi->dev, MAX6916_STATUS_REG, &data);
+	dev_info(&spi->dev, "MAX6916 RTC Status Reg = 0x%02x\n", data);
+
+	rtc = devm_rtc_device_register(&spi->dev, "max6916",
+				       &max6916_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	spi_set_drvdata(spi, rtc);
+
+	return 0;
+}
+
+static struct spi_driver max6916_driver = {
+	.driver = {
+		.name = "max6916",
+	},
+	.probe = max6916_probe,
+};
+module_spi_driver(max6916_driver);
+
+MODULE_DESCRIPTION("MAX6916 SPI RTC DRIVER");
+MODULE_AUTHOR("Venkat Prashanth B U <venkat.prashanth2498@gmail.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/asm-generic/rtc.h b/drivers/rtc/rtc-mc146818-lib.c
index 4e3b6558331e..2f1772a358ca 100644
--- a/include/asm-generic/rtc.h
+++ b/drivers/rtc/rtc-mc146818-lib.c
@@ -1,40 +1,16 @@
-/* 
- * include/asm-generic/rtc.h
- *
- * Author: Tom Rini <trini@mvista.com>
- *
- * Based on:
- * drivers/char/rtc.c
- *
- * Please read the COPYING file for all license details.
- */
-
-#ifndef __ASM_RTC_H__
-#define __ASM_RTC_H__
-
-#include <linux/mc146818rtc.h>
-#include <linux/rtc.h>
 #include <linux/bcd.h>
 #include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/mc146818rtc.h>
+
 #ifdef CONFIG_ACPI
 #include <linux/acpi.h>
 #endif
 
-#define RTC_PIE 0x40		/* periodic interrupt enable */
-#define RTC_AIE 0x20		/* alarm interrupt enable */
-#define RTC_UIE 0x10		/* update-finished interrupt enable */
-
-/* some dummy definitions */
-#define RTC_BATT_BAD 0x100	/* battery bad */
-#define RTC_SQWE 0x08		/* enable square-wave output */
-#define RTC_DM_BINARY 0x04	/* all time/date values are BCD if clear */
-#define RTC_24H 0x02		/* 24 hour mode - else hours bit 7 means pm */
-#define RTC_DST_EN 0x01	        /* auto switch DST - works f. USA only */
-
 /*
  * Returns true if a clock update is in progress
  */
-static inline unsigned char rtc_is_updating(void)
+static inline unsigned char mc146818_is_updating(void)
 {
 	unsigned char uip;
 	unsigned long flags;
@@ -45,7 +21,7 @@ static inline unsigned char rtc_is_updating(void)
 	return uip;
 }
 
-static inline unsigned int __get_rtc_time(struct rtc_time *time)
+unsigned int mc146818_get_time(struct rtc_time *time)
 {
 	unsigned char ctrl;
 	unsigned long flags;
@@ -60,11 +36,11 @@ static inline unsigned int __get_rtc_time(struct rtc_time *time)
 	 * can take just over 2ms. We wait 20ms. There is no need to
 	 * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
 	 * If you need to know *exactly* when a second has started, enable
-	 * periodic update complete interrupts, (via ioctl) and then 
+	 * periodic update complete interrupts, (via ioctl) and then
 	 * immediately read /dev/rtc which will block until you get the IRQ.
 	 * Once the read clears, read the RTC time (again via ioctl). Easy.
 	 */
-	if (rtc_is_updating())
+	if (mc146818_is_updating())
 		mdelay(20);
 
 	/*
@@ -120,13 +96,10 @@ static inline unsigned int __get_rtc_time(struct rtc_time *time)
 
 	return RTC_24H;
 }
-
-#ifndef get_rtc_time
-#define get_rtc_time	__get_rtc_time
-#endif
+EXPORT_SYMBOL_GPL(mc146818_get_time);
 
 /* Set the current date and time in the real time clock. */
-static inline int __set_rtc_time(struct rtc_time *time)
+int mc146818_set_time(struct rtc_time *time)
 {
 	unsigned long flags;
 	unsigned char mon, day, hrs, min, sec;
@@ -222,26 +195,4 @@ static inline int __set_rtc_time(struct rtc_time *time)
 
 	return 0;
 }
-
-#ifndef set_rtc_time
-#define set_rtc_time	__set_rtc_time
-#endif
-
-static inline unsigned int get_rtc_ss(void)
-{
-	struct rtc_time h;
-
-	get_rtc_time(&h);
-	return h.tm_sec;
-}
-
-static inline int get_rtc_pll(struct rtc_pll_info *pll)
-{
-	return -EINVAL;
-}
-static inline int set_rtc_pll(struct rtc_pll_info *pll)
-{
-	return -EINVAL;
-}
-
-#endif /* __ASM_RTC_H__ */
+EXPORT_SYMBOL_GPL(mc146818_set_time);
diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c
index 0094d9bdd1e6..7334c44fa7c3 100644
--- a/drivers/rtc/rtc-mrst.c
+++ b/drivers/rtc/rtc-mrst.c
@@ -32,11 +32,11 @@
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
 #include <linux/kernel.h>
+#include <linux/mc146818rtc.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/sfi.h>
 
-#include <asm-generic/rtc.h>
 #include <asm/intel_scu_ipc.h>
 #include <asm/intel-mid.h>
 #include <asm/intel_mid_vrtc.h>
@@ -149,14 +149,6 @@ static int mrst_read_alarm(struct device *dev, struct rtc_wkalrm *t)
 	if (mrst->irq <= 0)
 		return -EIO;
 
-	/* Basic alarms only support hour, minute, and seconds fields.
-	 * Some also support day and month, for alarms up to a year in
-	 * the future.
-	 */
-	t->time.tm_mday = -1;
-	t->time.tm_mon = -1;
-	t->time.tm_year = -1;
-
 	/* vRTC only supports binary mode */
 	spin_lock_irq(&rtc_lock);
 	t->time.tm_sec = vrtc_cmos_read(RTC_SECONDS_ALARM);
diff --git a/drivers/rtc/rtc-pcf2123.c b/drivers/rtc/rtc-pcf2123.c
index f22e060709e5..b4478cc92b55 100644
--- a/drivers/rtc/rtc-pcf2123.c
+++ b/drivers/rtc/rtc-pcf2123.c
@@ -96,7 +96,7 @@
 #define CD_TMR_TE		BIT(3)	/* Countdown timer enable */
 
 /* PCF2123_REG_OFFSET BITS */
-#define OFFSET_SIGN_BIT		BIT(6)	/* 2's complement sign bit */
+#define OFFSET_SIGN_BIT		6	/* 2's complement sign bit */
 #define OFFSET_COARSE		BIT(7)	/* Coarse mode offset */
 #define OFFSET_STEP		(2170)	/* Offset step in parts per billion */
 
@@ -217,7 +217,7 @@ static int pcf2123_read_offset(struct device *dev, long *offset)
 	if (reg & OFFSET_COARSE)
 		reg <<= 1; /* multiply by 2 and sign extend */
 	else
-		reg |= (reg & OFFSET_SIGN_BIT) << 1; /* sign extend only */
+		reg = sign_extend32(reg, OFFSET_SIGN_BIT);
 
 	*offset = ((long)reg) * OFFSET_STEP;
 
diff --git a/drivers/rtc/rtc-pcf85063.c b/drivers/rtc/rtc-pcf85063.c
index e8ddbb359d11..efb0a08ac117 100644
--- a/drivers/rtc/rtc-pcf85063.c
+++ b/drivers/rtc/rtc-pcf85063.c
@@ -16,6 +16,16 @@
 #include <linux/rtc.h>
 #include <linux/module.h>
 
+/*
+ * Information for this driver was pulled from the following datasheets.
+ *
+ *  http://www.nxp.com/documents/data_sheet/PCF85063A.pdf
+ *  http://www.nxp.com/documents/data_sheet/PCF85063TP.pdf
+ *
+ *  PCF85063A -- Rev. 6 — 18 November 2015
+ *  PCF85063TP -- Rev. 4 — 6 May 2015
+*/
+
 #define PCF85063_REG_CTRL1		0x00 /* status */
 #define PCF85063_REG_CTRL1_STOP		BIT(5)
 #define PCF85063_REG_CTRL2		0x01
@@ -55,10 +65,22 @@ static int pcf85063_stop_clock(struct i2c_client *client, u8 *ctrl1)
 	return 0;
 }
 
-/*
- * In the routines that deal directly with the pcf85063 hardware, we use
- * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
- */
+static int pcf85063_start_clock(struct i2c_client *client, u8 ctrl1)
+{
+	s32 ret;
+
+	/* start the clock */
+	ctrl1 &= PCF85063_REG_CTRL1_STOP;
+
+	ret = i2c_smbus_write_byte_data(client, PCF85063_REG_CTRL1, ctrl1);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failing to start the clock\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
 static int pcf85063_get_datetime(struct i2c_client *client, struct rtc_time *tm)
 {
 	int rc;
@@ -90,8 +112,7 @@ static int pcf85063_get_datetime(struct i2c_client *client, struct rtc_time *tm)
 	tm->tm_wday = regs[4] & 0x07;
 	tm->tm_mon = bcd2bin(regs[5] & 0x1F) - 1; /* rtc mn 1-12 */
 	tm->tm_year = bcd2bin(regs[6]);
-	if (tm->tm_year < 70)
-		tm->tm_year += 100;	/* assume we are in 1970...2069 */
+	tm->tm_year += 100;
 
 	return rtc_valid_tm(tm);
 }
@@ -99,13 +120,17 @@ static int pcf85063_get_datetime(struct i2c_client *client, struct rtc_time *tm)
 static int pcf85063_set_datetime(struct i2c_client *client, struct rtc_time *tm)
 {
 	int rc;
-	u8 regs[8];
+	u8 regs[7];
+	u8 ctrl1;
+
+	if ((tm->tm_year < 100) || (tm->tm_year > 199))
+		return -EINVAL;
 
 	/*
 	 * to accurately set the time, reset the divider chain and keep it in
 	 * reset state until all time/date registers are written
 	 */
-	rc = pcf85063_stop_clock(client, &regs[7]);
+	rc = pcf85063_stop_clock(client, &ctrl1);
 	if (rc != 0)
 		return rc;
 
@@ -125,14 +150,7 @@ static int pcf85063_set_datetime(struct i2c_client *client, struct rtc_time *tm)
 	regs[5] = bin2bcd(tm->tm_mon + 1);
 
 	/* year and century */
-	regs[6] = bin2bcd(tm->tm_year % 100);
-
-	/*
-	 * after all time/date registers are written, let the 'address auto
-	 * increment' feature wrap around and write register CTRL1 to re-enable
-	 * the clock divider chain again
-	 */
-	regs[7] &= ~PCF85063_REG_CTRL1_STOP;
+	regs[6] = bin2bcd(tm->tm_year - 100);
 
 	/* write all registers at once */
 	rc = i2c_smbus_write_i2c_block_data(client, PCF85063_REG_SC,
@@ -142,6 +160,15 @@ static int pcf85063_set_datetime(struct i2c_client *client, struct rtc_time *tm)
 		return rc;
 	}
 
+	/*
+	 * Write the control register as a separate action since the size of
+	 * the register space is different between the PCF85063TP and
+	 * PCF85063A devices.  The rollover point can not be used.
+	 */
+	rc = pcf85063_start_clock(client, ctrl1);
+	if (rc != 0)
+		return rc;
+
 	return 0;
 }
 
diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c
index b9ddbb001283..1227ceab61ee 100644
--- a/drivers/rtc/rtc-pcf8563.c
+++ b/drivers/rtc/rtc-pcf8563.c
@@ -341,14 +341,11 @@ static int pcf8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *tm)
 		"%s: raw data is min=%02x, hr=%02x, mday=%02x, wday=%02x\n",
 		__func__, buf[0], buf[1], buf[2], buf[3]);
 
+	tm->time.tm_sec = 0;
 	tm->time.tm_min = bcd2bin(buf[0] & 0x7F);
 	tm->time.tm_hour = bcd2bin(buf[1] & 0x3F);
 	tm->time.tm_mday = bcd2bin(buf[2] & 0x3F);
 	tm->time.tm_wday = bcd2bin(buf[3] & 0x7);
-	tm->time.tm_mon = -1;
-	tm->time.tm_year = -1;
-	tm->time.tm_yday = -1;
-	tm->time.tm_isdst = -1;
 
 	err = pcf8563_get_alarm_mode(client, &tm->enabled, &tm->pending);
 	if (err < 0)
diff --git a/drivers/rtc/rtc-rc5t583.c b/drivers/rtc/rtc-rc5t583.c
index f28d57788951..68ce77414bdc 100644
--- a/drivers/rtc/rtc-rc5t583.c
+++ b/drivers/rtc/rtc-rc5t583.c
@@ -128,6 +128,7 @@ static int rc5t583_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
 		return ret;
 	}
 
+	alm->time.tm_sec = 0;
 	alm->time.tm_min = bcd2bin(alarm_data[0]);
 	alm->time.tm_hour = bcd2bin(alarm_data[1]);
 	alm->time.tm_mday = bcd2bin(alarm_data[2]);
diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
index ef86229428fc..c8c757466783 100644
--- a/drivers/rtc/rtc-rs5c372.c
+++ b/drivers/rtc/rtc-rs5c372.c
@@ -341,12 +341,6 @@ static int rs5c_read_alarm(struct device *dev, struct rtc_wkalrm *t)
 	t->time.tm_sec = 0;
 	t->time.tm_min = bcd2bin(rs5c->regs[RS5C_REG_ALARM_A_MIN] & 0x7f);
 	t->time.tm_hour = rs5c_reg2hr(rs5c, rs5c->regs[RS5C_REG_ALARM_A_HOURS]);
-	t->time.tm_mday = -1;
-	t->time.tm_mon = -1;
-	t->time.tm_year = -1;
-	t->time.tm_wday = -1;
-	t->time.tm_yday = -1;
-	t->time.tm_isdst = -1;
 
 	/* ... and status */
 	t->enabled = !!(rs5c->regs[RS5C_REG_CTRL1] & RS5C_CTRL1_AALE);
diff --git a/drivers/rtc/rtc-rv8803.c b/drivers/rtc/rtc-rv8803.c
index f623038e586e..9a2f6a95d5a7 100644
--- a/drivers/rtc/rtc-rv8803.c
+++ b/drivers/rtc/rtc-rv8803.c
@@ -13,12 +13,15 @@
 
 #include <linux/bcd.h>
 #include <linux/bitops.h>
+#include <linux/log2.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/rtc.h>
 
+#define RV8803_I2C_TRY_COUNT		4
+
 #define RV8803_SEC			0x00
 #define RV8803_MIN			0x01
 #define RV8803_HOUR			0x02
@@ -56,19 +59,85 @@ struct rv8803_data {
 	u8 ctrl;
 };
 
+static int rv8803_read_reg(const struct i2c_client *client, u8 reg)
+{
+	int try = RV8803_I2C_TRY_COUNT;
+	s32 ret;
+
+	/*
+	 * There is a 61µs window during which the RTC does not acknowledge I2C
+	 * transfers. In that case, ensure that there are multiple attempts.
+	 */
+	do
+		ret = i2c_smbus_read_byte_data(client, reg);
+	while ((ret == -ENXIO || ret == -EIO) && --try);
+	if (ret < 0)
+		dev_err(&client->dev, "Unable to read register 0x%02x\n", reg);
+
+	return ret;
+}
+
+static int rv8803_read_regs(const struct i2c_client *client,
+			    u8 reg, u8 count, u8 *values)
+{
+	int try = RV8803_I2C_TRY_COUNT;
+	s32 ret;
+
+	do
+		ret = i2c_smbus_read_i2c_block_data(client, reg, count, values);
+	while ((ret == -ENXIO || ret == -EIO) && --try);
+	if (ret != count) {
+		dev_err(&client->dev,
+			"Unable to read registers 0x%02x..0x%02x\n",
+			reg, reg + count - 1);
+		return ret < 0 ? ret : -EIO;
+	}
+
+	return 0;
+}
+
+static int rv8803_write_reg(const struct i2c_client *client, u8 reg, u8 value)
+{
+	int try = RV8803_I2C_TRY_COUNT;
+	s32 ret;
+
+	do
+		ret = i2c_smbus_write_byte_data(client, reg, value);
+	while ((ret == -ENXIO || ret == -EIO) && --try);
+	if (ret)
+		dev_err(&client->dev, "Unable to write register 0x%02x\n", reg);
+
+	return ret;
+}
+
+static int rv8803_write_regs(const struct i2c_client *client,
+			     u8 reg, u8 count, const u8 *values)
+{
+	int try = RV8803_I2C_TRY_COUNT;
+	s32 ret;
+
+	do
+		ret = i2c_smbus_write_i2c_block_data(client, reg, count,
+						     values);
+	while ((ret == -ENXIO || ret == -EIO) && --try);
+	if (ret)
+		dev_err(&client->dev,
+			"Unable to write registers 0x%02x..0x%02x\n",
+			reg, reg + count - 1);
+
+	return ret;
+}
+
 static irqreturn_t rv8803_handle_irq(int irq, void *dev_id)
 {
 	struct i2c_client *client = dev_id;
 	struct rv8803_data *rv8803 = i2c_get_clientdata(client);
 	unsigned long events = 0;
-	int flags, try = 0;
+	int flags;
 
 	mutex_lock(&rv8803->flags_lock);
 
-	do {
-		flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
-		try++;
-	} while ((flags == -ENXIO) && (try < 3));
+	flags = rv8803_read_reg(client, RV8803_FLAG);
 	if (flags <= 0) {
 		mutex_unlock(&rv8803->flags_lock);
 		return IRQ_NONE;
@@ -100,9 +169,8 @@ static irqreturn_t rv8803_handle_irq(int irq, void *dev_id)
 
 	if (events) {
 		rtc_update_irq(rv8803->rtc, 1, events);
-		i2c_smbus_write_byte_data(client, RV8803_FLAG, flags);
-		i2c_smbus_write_byte_data(rv8803->client, RV8803_CTRL,
-					  rv8803->ctrl);
+		rv8803_write_reg(client, RV8803_FLAG, flags);
+		rv8803_write_reg(rv8803->client, RV8803_CTRL, rv8803->ctrl);
 	}
 
 	mutex_unlock(&rv8803->flags_lock);
@@ -118,7 +186,7 @@ static int rv8803_get_time(struct device *dev, struct rtc_time *tm)
 	u8 *date = date1;
 	int ret, flags;
 
-	flags = i2c_smbus_read_byte_data(rv8803->client, RV8803_FLAG);
+	flags = rv8803_read_reg(rv8803->client, RV8803_FLAG);
 	if (flags < 0)
 		return flags;
 
@@ -127,16 +195,14 @@ static int rv8803_get_time(struct device *dev, struct rtc_time *tm)
 		return -EINVAL;
 	}
 
-	ret = i2c_smbus_read_i2c_block_data(rv8803->client, RV8803_SEC,
-					    7, date);
-	if (ret != 7)
-		return ret < 0 ? ret : -EIO;
+	ret = rv8803_read_regs(rv8803->client, RV8803_SEC, 7, date);
+	if (ret)
+		return ret;
 
 	if ((date1[RV8803_SEC] & 0x7f) == bin2bcd(59)) {
-		ret = i2c_smbus_read_i2c_block_data(rv8803->client, RV8803_SEC,
-						    7, date2);
-		if (ret != 7)
-			return ret < 0 ? ret : -EIO;
+		ret = rv8803_read_regs(rv8803->client, RV8803_SEC, 7, date2);
+		if (ret)
+			return ret;
 
 		if ((date2[RV8803_SEC] & 0x7f) != bin2bcd(59))
 			date = date2;
@@ -145,23 +211,33 @@ static int rv8803_get_time(struct device *dev, struct rtc_time *tm)
 	tm->tm_sec  = bcd2bin(date[RV8803_SEC] & 0x7f);
 	tm->tm_min  = bcd2bin(date[RV8803_MIN] & 0x7f);
 	tm->tm_hour = bcd2bin(date[RV8803_HOUR] & 0x3f);
-	tm->tm_wday = ffs(date[RV8803_WEEK] & 0x7f);
+	tm->tm_wday = ilog2(date[RV8803_WEEK] & 0x7f);
 	tm->tm_mday = bcd2bin(date[RV8803_DAY] & 0x3f);
 	tm->tm_mon  = bcd2bin(date[RV8803_MONTH] & 0x1f) - 1;
 	tm->tm_year = bcd2bin(date[RV8803_YEAR]) + 100;
 
-	return rtc_valid_tm(tm);
+	return 0;
 }
 
 static int rv8803_set_time(struct device *dev, struct rtc_time *tm)
 {
 	struct rv8803_data *rv8803 = dev_get_drvdata(dev);
 	u8 date[7];
-	int flags, ret;
+	int ctrl, flags, ret;
 
 	if ((tm->tm_year < 100) || (tm->tm_year > 199))
 		return -EINVAL;
 
+	ctrl = rv8803_read_reg(rv8803->client, RV8803_CTRL);
+	if (ctrl < 0)
+		return ctrl;
+
+	/* Stop the clock */
+	ret = rv8803_write_reg(rv8803->client, RV8803_CTRL,
+			       ctrl | RV8803_CTRL_RESET);
+	if (ret)
+		return ret;
+
 	date[RV8803_SEC]   = bin2bcd(tm->tm_sec);
 	date[RV8803_MIN]   = bin2bcd(tm->tm_min);
 	date[RV8803_HOUR]  = bin2bcd(tm->tm_hour);
@@ -170,21 +246,26 @@ static int rv8803_set_time(struct device *dev, struct rtc_time *tm)
 	date[RV8803_MONTH] = bin2bcd(tm->tm_mon + 1);
 	date[RV8803_YEAR]  = bin2bcd(tm->tm_year - 100);
 
-	ret = i2c_smbus_write_i2c_block_data(rv8803->client, RV8803_SEC,
-					     7, date);
-	if (ret < 0)
+	ret = rv8803_write_regs(rv8803->client, RV8803_SEC, 7, date);
+	if (ret)
+		return ret;
+
+	/* Restart the clock */
+	ret = rv8803_write_reg(rv8803->client, RV8803_CTRL,
+			       ctrl & ~RV8803_CTRL_RESET);
+	if (ret)
 		return ret;
 
 	mutex_lock(&rv8803->flags_lock);
 
-	flags = i2c_smbus_read_byte_data(rv8803->client, RV8803_FLAG);
+	flags = rv8803_read_reg(rv8803->client, RV8803_FLAG);
 	if (flags < 0) {
 		mutex_unlock(&rv8803->flags_lock);
 		return flags;
 	}
 
-	ret = i2c_smbus_write_byte_data(rv8803->client, RV8803_FLAG,
-					flags & ~RV8803_FLAG_V2F);
+	ret = rv8803_write_reg(rv8803->client, RV8803_FLAG,
+			       flags & ~(RV8803_FLAG_V1F | RV8803_FLAG_V2F));
 
 	mutex_unlock(&rv8803->flags_lock);
 
@@ -198,22 +279,18 @@ static int rv8803_get_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	u8 alarmvals[3];
 	int flags, ret;
 
-	ret = i2c_smbus_read_i2c_block_data(client, RV8803_ALARM_MIN,
-					    3, alarmvals);
-	if (ret != 3)
-		return ret < 0 ? ret : -EIO;
+	ret = rv8803_read_regs(client, RV8803_ALARM_MIN, 3, alarmvals);
+	if (ret)
+		return ret;
 
-	flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
+	flags = rv8803_read_reg(client, RV8803_FLAG);
 	if (flags < 0)
 		return flags;
 
 	alrm->time.tm_sec  = 0;
 	alrm->time.tm_min  = bcd2bin(alarmvals[0] & 0x7f);
 	alrm->time.tm_hour = bcd2bin(alarmvals[1] & 0x3f);
-	alrm->time.tm_wday = -1;
 	alrm->time.tm_mday = bcd2bin(alarmvals[2] & 0x3f);
-	alrm->time.tm_mon  = -1;
-	alrm->time.tm_year = -1;
 
 	alrm->enabled = !!(rv8803->ctrl & RV8803_CTRL_AIE);
 	alrm->pending = (flags & RV8803_FLAG_AF) && alrm->enabled;
@@ -239,10 +316,10 @@ static int rv8803_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 
 	mutex_lock(&rv8803->flags_lock);
 
-	ret = i2c_smbus_read_i2c_block_data(client, RV8803_FLAG, 2, ctrl);
-	if (ret != 2) {
+	ret = rv8803_read_regs(client, RV8803_FLAG, 2, ctrl);
+	if (ret) {
 		mutex_unlock(&rv8803->flags_lock);
-		return ret < 0 ? ret : -EIO;
+		return ret;
 	}
 
 	alarmvals[0] = bin2bcd(alrm->time.tm_min);
@@ -251,8 +328,8 @@ static int rv8803_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 
 	if (rv8803->ctrl & (RV8803_CTRL_AIE | RV8803_CTRL_UIE)) {
 		rv8803->ctrl &= ~(RV8803_CTRL_AIE | RV8803_CTRL_UIE);
-		err = i2c_smbus_write_byte_data(rv8803->client, RV8803_CTRL,
-						rv8803->ctrl);
+		err = rv8803_write_reg(rv8803->client, RV8803_CTRL,
+				       rv8803->ctrl);
 		if (err) {
 			mutex_unlock(&rv8803->flags_lock);
 			return err;
@@ -260,13 +337,12 @@ static int rv8803_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	}
 
 	ctrl[1] &= ~RV8803_FLAG_AF;
-	err = i2c_smbus_write_byte_data(rv8803->client, RV8803_FLAG, ctrl[1]);
+	err = rv8803_write_reg(rv8803->client, RV8803_FLAG, ctrl[1]);
 	mutex_unlock(&rv8803->flags_lock);
 	if (err)
 		return err;
 
-	err = i2c_smbus_write_i2c_block_data(rv8803->client, RV8803_ALARM_MIN,
-					     3, alarmvals);
+	err = rv8803_write_regs(rv8803->client, RV8803_ALARM_MIN, 3, alarmvals);
 	if (err)
 		return err;
 
@@ -276,8 +352,8 @@ static int rv8803_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 		if (rv8803->rtc->aie_timer.enabled)
 			rv8803->ctrl |= RV8803_CTRL_AIE;
 
-		err = i2c_smbus_write_byte_data(rv8803->client, RV8803_CTRL,
-						rv8803->ctrl);
+		err = rv8803_write_reg(rv8803->client, RV8803_CTRL,
+				       rv8803->ctrl);
 		if (err)
 			return err;
 	}
@@ -306,21 +382,20 @@ static int rv8803_alarm_irq_enable(struct device *dev, unsigned int enabled)
 	}
 
 	mutex_lock(&rv8803->flags_lock);
-	flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
+	flags = rv8803_read_reg(client, RV8803_FLAG);
 	if (flags < 0) {
 		mutex_unlock(&rv8803->flags_lock);
 		return flags;
 	}
 	flags &= ~(RV8803_FLAG_AF | RV8803_FLAG_UF);
-	err = i2c_smbus_write_byte_data(client, RV8803_FLAG, flags);
+	err = rv8803_write_reg(client, RV8803_FLAG, flags);
 	mutex_unlock(&rv8803->flags_lock);
 	if (err)
 		return err;
 
 	if (ctrl != rv8803->ctrl) {
 		rv8803->ctrl = ctrl;
-		err = i2c_smbus_write_byte_data(client, RV8803_CTRL,
-						rv8803->ctrl);
+		err = rv8803_write_reg(client, RV8803_CTRL, rv8803->ctrl);
 		if (err)
 			return err;
 	}
@@ -336,7 +411,7 @@ static int rv8803_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 
 	switch (cmd) {
 	case RTC_VL_READ:
-		flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
+		flags = rv8803_read_reg(client, RV8803_FLAG);
 		if (flags < 0)
 			return flags;
 
@@ -355,16 +430,16 @@ static int rv8803_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 
 	case RTC_VL_CLR:
 		mutex_lock(&rv8803->flags_lock);
-		flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
+		flags = rv8803_read_reg(client, RV8803_FLAG);
 		if (flags < 0) {
 			mutex_unlock(&rv8803->flags_lock);
 			return flags;
 		}
 
 		flags &= ~(RV8803_FLAG_V1F | RV8803_FLAG_V2F);
-		ret = i2c_smbus_write_byte_data(client, RV8803_FLAG, flags);
+		ret = rv8803_write_reg(client, RV8803_FLAG, flags);
 		mutex_unlock(&rv8803->flags_lock);
-		if (ret < 0)
+		if (ret)
 			return ret;
 
 		return 0;
@@ -382,8 +457,8 @@ static ssize_t rv8803_nvram_write(struct file *filp, struct kobject *kobj,
 	struct i2c_client *client = to_i2c_client(dev);
 	int ret;
 
-	ret = i2c_smbus_write_byte_data(client, RV8803_RAM, buf[0]);
-	if (ret < 0)
+	ret = rv8803_write_reg(client, RV8803_RAM, buf[0]);
+	if (ret)
 		return ret;
 
 	return 1;
@@ -397,7 +472,7 @@ static ssize_t rv8803_nvram_read(struct file *filp, struct kobject *kobj,
 	struct i2c_client *client = to_i2c_client(dev);
 	int ret;
 
-	ret = i2c_smbus_read_byte_data(client, RV8803_RAM);
+	ret = rv8803_read_reg(client, RV8803_RAM);
 	if (ret < 0)
 		return ret;
 
@@ -427,7 +502,7 @@ static int rv8803_probe(struct i2c_client *client,
 {
 	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
 	struct rv8803_data *rv8803;
-	int err, flags, try = 0;
+	int err, flags;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
 				     I2C_FUNC_SMBUS_I2C_BLOCK)) {
@@ -444,16 +519,7 @@ static int rv8803_probe(struct i2c_client *client,
 	rv8803->client = client;
 	i2c_set_clientdata(client, rv8803);
 
-	/*
-	 * There is a 60µs window where the RTC may not reply on the i2c bus in
-	 * that case, the transfer is not ACKed. In that case, ensure there are
-	 * multiple attempts.
-	 */
-	do {
-		flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
-		try++;
-	} while ((flags == -ENXIO) && (try < 3));
-
+	flags = rv8803_read_reg(client, RV8803_FLAG);
 	if (flags < 0)
 		return flags;
 
@@ -488,12 +554,7 @@ static int rv8803_probe(struct i2c_client *client,
 		return PTR_ERR(rv8803->rtc);
 	}
 
-	try = 0;
-	do {
-		err = i2c_smbus_write_byte_data(rv8803->client, RV8803_EXT,
-						RV8803_EXT_WADA);
-		try++;
-	} while ((err == -ENXIO) && (try < 3));
+	err = rv8803_write_reg(rv8803->client, RV8803_EXT, RV8803_EXT_WADA);
 	if (err)
 		return err;
 
diff --git a/drivers/rtc/rtc-rx8010.c b/drivers/rtc/rtc-rx8010.c
index 772d221ec2d9..7163b91bb773 100644
--- a/drivers/rtc/rtc-rx8010.c
+++ b/drivers/rtc/rtc-rx8010.c
@@ -272,15 +272,9 @@ static int rx8010_read_alarm(struct device *dev, struct rtc_wkalrm *t)
 	t->time.tm_min = bcd2bin(alarmvals[0] & 0x7f);
 	t->time.tm_hour = bcd2bin(alarmvals[1] & 0x3f);
 
-	if (alarmvals[2] & RX8010_ALARM_AE)
-		t->time.tm_mday = -1;
-	else
+	if (!(alarmvals[2] & RX8010_ALARM_AE))
 		t->time.tm_mday = bcd2bin(alarmvals[2] & 0x7f);
 
-	t->time.tm_wday = -1;
-	t->time.tm_mon = -1;
-	t->time.tm_year = -1;
-
 	t->enabled = !!(rx8010->ctrlreg & RX8010_CTRL_AIE);
 	t->pending = (flagreg & RX8010_FLAG_AF) && t->enabled;
 
diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c
index 9f105efbc546..2b85cc7a24e7 100644
--- a/drivers/rtc/rtc-rx8025.c
+++ b/drivers/rtc/rtc-rx8025.c
@@ -319,11 +319,6 @@ static int rx8025_read_alarm(struct device *dev, struct rtc_wkalrm *t)
 		t->time.tm_hour = bcd2bin(ald[1] & 0x1f) % 12
 			+ (ald[1] & 0x20 ? 12 : 0);
 
-	t->time.tm_wday = -1;
-	t->time.tm_mday = -1;
-	t->time.tm_mon = -1;
-	t->time.tm_year = -1;
-
 	dev_dbg(dev, "%s: date: %ds %dm %dh %dmd %dm %dy\n",
 		__func__,
 		t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
diff --git a/drivers/rtc/rtc-s35390a.c b/drivers/rtc/rtc-s35390a.c
index f40afdd0e5f5..5dab4665ca3b 100644
--- a/drivers/rtc/rtc-s35390a.c
+++ b/drivers/rtc/rtc-s35390a.c
@@ -15,6 +15,7 @@
 #include <linux/bitrev.h>
 #include <linux/bcd.h>
 #include <linux/slab.h>
+#include <linux/delay.h>
 
 #define S35390A_CMD_STATUS1	0
 #define S35390A_CMD_STATUS2	1
@@ -34,10 +35,14 @@
 #define S35390A_ALRM_BYTE_HOURS	1
 #define S35390A_ALRM_BYTE_MINS	2
 
+/* flags for STATUS1 */
 #define S35390A_FLAG_POC	0x01
 #define S35390A_FLAG_BLD	0x02
+#define S35390A_FLAG_INT2	0x04
 #define S35390A_FLAG_24H	0x40
 #define S35390A_FLAG_RESET	0x80
+
+/* flag for STATUS2 */
 #define S35390A_FLAG_TEST	0x01
 
 #define S35390A_INT2_MODE_MASK		0xF0
@@ -94,19 +99,63 @@ static int s35390a_get_reg(struct s35390a *s35390a, int reg, char *buf, int len)
 	return 0;
 }
 
-static int s35390a_reset(struct s35390a *s35390a)
+/*
+ * Returns <0 on error, 0 if rtc is setup fine and 1 if the chip was reset.
+ * To keep the information if an irq is pending, pass the value read from
+ * STATUS1 to the caller.
+ */
+static int s35390a_reset(struct s35390a *s35390a, char *status1)
 {
-	char buf[1];
-
-	if (s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf)) < 0)
-		return -EIO;
-
-	if (!(buf[0] & (S35390A_FLAG_POC | S35390A_FLAG_BLD)))
+	char buf;
+	int ret;
+	unsigned initcount = 0;
+
+	ret = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, status1, 1);
+	if (ret < 0)
+		return ret;
+
+	if (*status1 & S35390A_FLAG_POC)
+		/*
+		 * Do not communicate for 0.5 seconds since the power-on
+		 * detection circuit is in operation.
+		 */
+		msleep(500);
+	else if (!(*status1 & S35390A_FLAG_BLD))
+		/*
+		 * If both POC and BLD are unset everything is fine.
+		 */
 		return 0;
 
-	buf[0] |= (S35390A_FLAG_RESET | S35390A_FLAG_24H);
-	buf[0] &= 0xf0;
-	return s35390a_set_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf));
+	/*
+	 * At least one of POC and BLD are set, so reinitialise chip. Keeping
+	 * this information in the hardware to know later that the time isn't
+	 * valid is unfortunately not possible because POC and BLD are cleared
+	 * on read. So the reset is best done now.
+	 *
+	 * The 24H bit is kept over reset, so set it already here.
+	 */
+initialize:
+	*status1 = S35390A_FLAG_24H;
+	buf = S35390A_FLAG_RESET | S35390A_FLAG_24H;
+	ret = s35390a_set_reg(s35390a, S35390A_CMD_STATUS1, &buf, 1);
+
+	if (ret < 0)
+		return ret;
+
+	ret = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, &buf, 1);
+	if (ret < 0)
+		return ret;
+
+	if (buf & (S35390A_FLAG_POC | S35390A_FLAG_BLD)) {
+		/* Try up to five times to reset the chip */
+		if (initcount < 5) {
+			++initcount;
+			goto initialize;
+		} else
+			return -EIO;
+	}
+
+	return 1;
 }
 
 static int s35390a_disable_test_mode(struct s35390a *s35390a)
@@ -217,12 +266,12 @@ static int s35390a_set_alarm(struct i2c_client *client, struct rtc_wkalrm *alm)
 		alm->time.tm_min, alm->time.tm_hour, alm->time.tm_mday,
 		alm->time.tm_mon, alm->time.tm_year, alm->time.tm_wday);
 
-	/* disable interrupt */
+	/* disable interrupt (which deasserts the irq line) */
 	err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &sts, sizeof(sts));
 	if (err < 0)
 		return err;
 
-	/* clear pending interrupt, if any */
+	/* clear pending interrupt (in STATUS1 only), if any */
 	err = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, &sts, sizeof(sts));
 	if (err < 0)
 		return err;
@@ -242,6 +291,8 @@ static int s35390a_set_alarm(struct i2c_client *client, struct rtc_wkalrm *alm)
 
 	if (alm->time.tm_wday != -1)
 		buf[S35390A_ALRM_BYTE_WDAY] = bin2bcd(alm->time.tm_wday) | 0x80;
+	else
+		buf[S35390A_ALRM_BYTE_WDAY] = 0;
 
 	buf[S35390A_ALRM_BYTE_HOURS] = s35390a_hr2reg(s35390a,
 			alm->time.tm_hour) | 0x80;
@@ -269,23 +320,43 @@ static int s35390a_read_alarm(struct i2c_client *client, struct rtc_wkalrm *alm)
 	if (err < 0)
 		return err;
 
-	if (bitrev8(sts) != S35390A_INT2_MODE_ALARM)
-		return -EINVAL;
+	if ((bitrev8(sts) & S35390A_INT2_MODE_MASK) != S35390A_INT2_MODE_ALARM) {
+		/*
+		 * When the alarm isn't enabled, the register to configure
+		 * the alarm time isn't accessible.
+		 */
+		alm->enabled = 0;
+		return 0;
+	} else {
+		alm->enabled = 1;
+	}
 
 	err = s35390a_get_reg(s35390a, S35390A_CMD_INT2_REG1, buf, sizeof(buf));
 	if (err < 0)
 		return err;
 
 	/* This chip returns the bits of each byte in reverse order */
-	for (i = 0; i < 3; ++i) {
+	for (i = 0; i < 3; ++i)
 		buf[i] = bitrev8(buf[i]);
-		buf[i] &= ~0x80;
-	}
 
-	alm->time.tm_wday = bcd2bin(buf[S35390A_ALRM_BYTE_WDAY]);
-	alm->time.tm_hour = s35390a_reg2hr(s35390a,
-						buf[S35390A_ALRM_BYTE_HOURS]);
-	alm->time.tm_min = bcd2bin(buf[S35390A_ALRM_BYTE_MINS]);
+	/*
+	 * B0 of the three matching registers is an enable flag. Iff it is set
+	 * the configured value is used for matching.
+	 */
+	if (buf[S35390A_ALRM_BYTE_WDAY] & 0x80)
+		alm->time.tm_wday =
+			bcd2bin(buf[S35390A_ALRM_BYTE_WDAY] & ~0x80);
+
+	if (buf[S35390A_ALRM_BYTE_HOURS] & 0x80)
+		alm->time.tm_hour =
+			s35390a_reg2hr(s35390a,
+				       buf[S35390A_ALRM_BYTE_HOURS] & ~0x80);
+
+	if (buf[S35390A_ALRM_BYTE_MINS] & 0x80)
+		alm->time.tm_min = bcd2bin(buf[S35390A_ALRM_BYTE_MINS] & ~0x80);
+
+	/* alarm triggers always at s=0 */
+	alm->time.tm_sec = 0;
 
 	dev_dbg(&client->dev, "%s: alm is mins=%d, hours=%d, wday=%d\n",
 			__func__, alm->time.tm_min, alm->time.tm_hour,
@@ -327,11 +398,11 @@ static struct i2c_driver s35390a_driver;
 static int s35390a_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
-	int err;
+	int err, err_reset;
 	unsigned int i;
 	struct s35390a *s35390a;
 	struct rtc_time tm;
-	char buf[1];
+	char buf, status1;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
 		err = -ENODEV;
@@ -360,29 +431,35 @@ static int s35390a_probe(struct i2c_client *client,
 		}
 	}
 
-	err = s35390a_reset(s35390a);
-	if (err < 0) {
+	err_reset = s35390a_reset(s35390a, &status1);
+	if (err_reset < 0) {
+		err = err_reset;
 		dev_err(&client->dev, "error resetting chip\n");
 		goto exit_dummy;
 	}
 
-	err = s35390a_disable_test_mode(s35390a);
-	if (err < 0) {
-		dev_err(&client->dev, "error disabling test mode\n");
-		goto exit_dummy;
-	}
-
-	err = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf));
-	if (err < 0) {
-		dev_err(&client->dev, "error checking 12/24 hour mode\n");
-		goto exit_dummy;
-	}
-	if (buf[0] & S35390A_FLAG_24H)
+	if (status1 & S35390A_FLAG_24H)
 		s35390a->twentyfourhour = 1;
 	else
 		s35390a->twentyfourhour = 0;
 
-	if (s35390a_get_datetime(client, &tm) < 0)
+	if (status1 & S35390A_FLAG_INT2) {
+		/* disable alarm (and maybe test mode) */
+		buf = 0;
+		err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &buf, 1);
+		if (err < 0) {
+			dev_err(&client->dev, "error disabling alarm");
+			goto exit_dummy;
+		}
+	} else {
+		err = s35390a_disable_test_mode(s35390a);
+		if (err < 0) {
+			dev_err(&client->dev, "error disabling test mode\n");
+			goto exit_dummy;
+		}
+	}
+
+	if (err_reset > 0 || s35390a_get_datetime(client, &tm) < 0)
 		dev_warn(&client->dev, "clock needs to be set\n");
 
 	device_set_wakeup_capable(&client->dev, 1);
@@ -395,6 +472,10 @@ static int s35390a_probe(struct i2c_client *client,
 		err = PTR_ERR(s35390a->rtc);
 		goto exit_dummy;
 	}
+
+	if (status1 & S35390A_FLAG_INT2)
+		rtc_update_irq(s35390a->rtc, 1, RTC_AF);
+
 	return 0;
 
 exit_dummy:
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index d01ad7e8078e..d44fb34df8fe 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -149,12 +149,14 @@ static int s3c_rtc_setfreq(struct s3c_rtc *info, int freq)
 	if (!is_power_of_2(freq))
 		return -EINVAL;
 
+	s3c_rtc_enable_clk(info);
 	spin_lock_irq(&info->pie_lock);
 
 	if (info->data->set_freq)
 		info->data->set_freq(info, freq);
 
 	spin_unlock_irq(&info->pie_lock);
+	s3c_rtc_disable_clk(info);
 
 	return 0;
 }
@@ -264,35 +266,23 @@ static int s3c_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm)
 	/* decode the alarm enable field */
 	if (alm_en & S3C2410_RTCALM_SECEN)
 		alm_tm->tm_sec = bcd2bin(alm_tm->tm_sec);
-	else
-		alm_tm->tm_sec = -1;
 
 	if (alm_en & S3C2410_RTCALM_MINEN)
 		alm_tm->tm_min = bcd2bin(alm_tm->tm_min);
-	else
-		alm_tm->tm_min = -1;
 
 	if (alm_en & S3C2410_RTCALM_HOUREN)
 		alm_tm->tm_hour = bcd2bin(alm_tm->tm_hour);
-	else
-		alm_tm->tm_hour = -1;
 
 	if (alm_en & S3C2410_RTCALM_DAYEN)
 		alm_tm->tm_mday = bcd2bin(alm_tm->tm_mday);
-	else
-		alm_tm->tm_mday = -1;
 
 	if (alm_en & S3C2410_RTCALM_MONEN) {
 		alm_tm->tm_mon = bcd2bin(alm_tm->tm_mon);
 		alm_tm->tm_mon -= 1;
-	} else {
-		alm_tm->tm_mon = -1;
 	}
 
 	if (alm_en & S3C2410_RTCALM_YEAREN)
 		alm_tm->tm_year = bcd2bin(alm_tm->tm_year);
-	else
-		alm_tm->tm_year = -1;
 
 	return 0;
 }
@@ -577,8 +567,6 @@ static int s3c_rtc_probe(struct platform_device *pdev)
 
 	s3c_rtc_setfreq(info, 1);
 
-	s3c_rtc_disable_clk(info);
-
 	return 0;
 
  err_nortc:
diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c
index a45845a571e5..17b6235d67a5 100644
--- a/drivers/rtc/rtc-sh.c
+++ b/drivers/rtc/rtc-sh.c
@@ -481,7 +481,6 @@ static int sh_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
 	tm->tm_mon	= sh_rtc_read_alarm_value(rtc, RMONAR);
 	if (tm->tm_mon > 0)
 		tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */
-	tm->tm_year     = 0xffff;
 
 	wkalrm->enabled = (readb(rtc->regbase + RCR1) & RCR1_AIE) ? 1 : 0;
 
@@ -500,52 +499,13 @@ static inline void sh_rtc_write_alarm_value(struct sh_rtc *rtc,
 		writeb(bin2bcd(value) | AR_ENB,  rtc->regbase + reg_off);
 }
 
-static int sh_rtc_check_alarm(struct rtc_time *tm)
-{
-	/*
-	 * The original rtc says anything > 0xc0 is "don't care" or "match
-	 * all" - most users use 0xff but rtc-dev uses -1 for the same thing.
-	 * The original rtc doesn't support years - some things use -1 and
-	 * some 0xffff. We use -1 to make out tests easier.
-	 */
-	if (tm->tm_year == 0xffff)
-		tm->tm_year = -1;
-	if (tm->tm_mon >= 0xff)
-		tm->tm_mon = -1;
-	if (tm->tm_mday >= 0xff)
-		tm->tm_mday = -1;
-	if (tm->tm_wday >= 0xff)
-		tm->tm_wday = -1;
-	if (tm->tm_hour >= 0xff)
-		tm->tm_hour = -1;
-	if (tm->tm_min >= 0xff)
-		tm->tm_min = -1;
-	if (tm->tm_sec >= 0xff)
-		tm->tm_sec = -1;
-
-	if (tm->tm_year > 9999 ||
-		tm->tm_mon >= 12 ||
-		tm->tm_mday == 0 || tm->tm_mday >= 32 ||
-		tm->tm_wday >= 7 ||
-		tm->tm_hour >= 24 ||
-		tm->tm_min >= 60 ||
-		tm->tm_sec >= 60)
-		return -EINVAL;
-
-	return 0;
-}
-
 static int sh_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct sh_rtc *rtc = platform_get_drvdata(pdev);
 	unsigned int rcr1;
 	struct rtc_time *tm = &wkalrm->time;
-	int mon, err;
-
-	err = sh_rtc_check_alarm(tm);
-	if (unlikely(err < 0))
-		return err;
+	int mon;
 
 	spin_lock_irq(&rtc->lock);
 
diff --git a/drivers/rtc/rtc-tegra.c b/drivers/rtc/rtc-tegra.c
index 60232bd366ef..15ac597d54da 100644
--- a/drivers/rtc/rtc-tegra.c
+++ b/drivers/rtc/rtc-tegra.c
@@ -179,12 +179,6 @@ static int tegra_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	if (sec == 0) {
 		/* alarm is disabled. */
 		alarm->enabled = 0;
-		alarm->time.tm_mon = -1;
-		alarm->time.tm_mday = -1;
-		alarm->time.tm_year = -1;
-		alarm->time.tm_hour = -1;
-		alarm->time.tm_min = -1;
-		alarm->time.tm_sec = -1;
 	} else {
 		/* alarm is enabled. */
 		alarm->enabled = 1;
diff --git a/drivers/rtc/rtc-v3020.c b/drivers/rtc/rtc-v3020.c
index 7a0436329d6c..1f3117b5a83c 100644
--- a/drivers/rtc/rtc-v3020.c
+++ b/drivers/rtc/rtc-v3020.c
@@ -25,7 +25,7 @@
 #include <linux/rtc.h>
 #include <linux/types.h>
 #include <linux/bcd.h>
-#include <linux/rtc-v3020.h>
+#include <linux/platform_data/rtc-v3020.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
diff --git a/include/linux/ds17287rtc.h b/include/linux/ds17287rtc.h
deleted file mode 100644
index d85d3f497b96..000000000000
--- a/include/linux/ds17287rtc.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * ds17287rtc.h - register definitions for the ds1728[57] RTC / CMOS RAM
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * (C) 2003 Guido Guenther <agx@sigxcpu.org>
- */
-#ifndef __LINUX_DS17287RTC_H
-#define __LINUX_DS17287RTC_H
-
-#include <linux/rtc.h>			/* get the user-level API */
-#include <linux/mc146818rtc.h>
-
-/* Register A */
-#define DS_REGA_DV2	0x40		/* countdown chain */
-#define DS_REGA_DV1	0x20		/* oscillator enable */
-#define DS_REGA_DV0	0x10		/* bank select */
-
-/* bank 1 registers */
-#define DS_B1_MODEL	0x40		/* model number byte */
-#define DS_B1_SN1 	0x41		/* serial number byte 1 */
-#define DS_B1_SN2 	0x42		/* serial number byte 2 */
-#define DS_B1_SN3 	0x43		/* serial number byte 3 */
-#define DS_B1_SN4 	0x44		/* serial number byte 4 */
-#define DS_B1_SN5 	0x45		/* serial number byte 5 */
-#define DS_B1_SN6 	0x46		/* serial number byte 6 */
-#define DS_B1_CRC 	0x47		/* CRC byte */
-#define DS_B1_CENTURY 	0x48		/* Century byte */
-#define DS_B1_DALARM 	0x49		/* date alarm */
-#define DS_B1_XCTRL4A	0x4a		/* extendec control register 4a */
-#define DS_B1_XCTRL4B	0x4b		/* extendec control register 4b */
-#define DS_B1_RTCADDR2 	0x4e		/* rtc address 2 */
-#define DS_B1_RTCADDR3 	0x4f		/* rtc address 3 */
-#define DS_B1_RAMLSB	0x50		/* extended ram LSB */
-#define DS_B1_RAMMSB	0x51		/* extended ram MSB */
-#define DS_B1_RAMDPORT	0x53		/* extended ram data port */
-
-/* register details */
-/* extended control register 4a */
-#define DS_XCTRL4A_VRT2	0x80 		/* valid ram and time */
-#define DS_XCTRL4A_INCR	0x40		/* increment progress status */
-#define DS_XCTRL4A_BME	0x20		/* burst mode enable */
-#define DS_XCTRL4A_PAB	0x08		/* power active bar ctrl */
-#define DS_XCTRL4A_RF	0x04		/* ram clear flag */
-#define DS_XCTRL4A_WF	0x02		/* wake up alarm flag */
-#define DS_XCTRL4A_KF	0x01		/* kickstart flag */
-
-/* interrupt causes */
-#define DS_XCTRL4A_IFS	(DS_XCTRL4A_RF|DS_XCTRL4A_WF|DS_XCTRL4A_KF)
-
-/* extended control register 4b */
-#define DS_XCTRL4B_ABE	0x80 		/* auxiliary battery enable */
-#define DS_XCTRL4B_E32K	0x40		/* enable 32.768 kHz Output */
-#define DS_XCTRL4B_CS	0x20		/* crystal select */
-#define DS_XCTRL4B_RCE	0x10		/* ram clear enable */
-#define DS_XCTRL4B_PRS	0x08		/* PAB resec select */
-#define DS_XCTRL4B_RIE	0x04		/* ram clear interrupt enable */
-#define DS_XCTRL4B_WFE	0x02		/* wake up alarm interrupt enable */
-#define DS_XCTRL4B_KFE	0x01		/* kickstart interrupt enable */
-
-/* interrupt enable bits */
-#define DS_XCTRL4B_IFES	(DS_XCTRL4B_RIE|DS_XCTRL4B_WFE|DS_XCTRL4B_KFE)
-
-#endif /* __LINUX_DS17287RTC_H */
diff --git a/include/linux/mc146818rtc.h b/include/linux/mc146818rtc.h
index 433e0c74d643..a585b4b5fa0e 100644
--- a/include/linux/mc146818rtc.h
+++ b/include/linux/mc146818rtc.h
@@ -14,6 +14,8 @@
 #include <asm/io.h>
 #include <linux/rtc.h>			/* get the user-level API */
 #include <asm/mc146818rtc.h>		/* register access macros */
+#include <linux/bcd.h>
+#include <linux/delay.h>
 
 #ifdef __KERNEL__
 #include <linux/spinlock.h>		/* spinlock_t */
@@ -120,4 +122,7 @@ struct cmos_rtc_board_info {
 #define RTC_IO_EXTENT_USED      RTC_IO_EXTENT
 #endif /* ARCH_RTC_LOCATION */
 
+unsigned int mc146818_get_time(struct rtc_time *time);
+int mc146818_set_time(struct rtc_time *time);
+
 #endif /* _MC146818RTC_H */
diff --git a/include/linux/rtc-ds2404.h b/include/linux/platform_data/rtc-ds2404.h
index 22c53825528f..22c53825528f 100644
--- a/include/linux/rtc-ds2404.h
+++ b/include/linux/platform_data/rtc-ds2404.h
diff --git a/include/linux/m48t86.h b/include/linux/platform_data/rtc-m48t86.h
index 915d6b4f0f89..915d6b4f0f89 100644
--- a/include/linux/m48t86.h
+++ b/include/linux/platform_data/rtc-m48t86.h
diff --git a/include/linux/rtc-v3020.h b/include/linux/platform_data/rtc-v3020.h
index e55d82cebf80..e55d82cebf80 100644
--- a/include/linux/rtc-v3020.h
+++ b/include/linux/platform_data/rtc-v3020.h
diff --git a/include/linux/ds1286.h b/include/linux/rtc/ds1286.h
index 45ea0aa0aeb9..45ea0aa0aeb9 100644
--- a/include/linux/ds1286.h
+++ b/include/linux/rtc/ds1286.h
diff --git a/tools/testing/selftests/timers/rtctest.c b/tools/testing/selftests/timers/rtctest.c
index 624bce51b27d..4230d3052e5d 100644
--- a/tools/testing/selftests/timers/rtctest.c
+++ b/tools/testing/selftests/timers/rtctest.c
@@ -144,11 +144,12 @@ test_READ:
 
 	retval = ioctl(fd, RTC_ALM_SET, &rtc_tm);
 	if (retval == -1) {
-		if (errno == ENOTTY) {
+		if (errno == EINVAL) {
 			fprintf(stderr,
 				"\n...Alarm IRQs not supported.\n");
 			goto test_PIE;
 		}
+
 		perror("RTC_ALM_SET ioctl");
 		exit(errno);
 	}
@@ -166,6 +167,12 @@ test_READ:
 	/* Enable alarm interrupts */
 	retval = ioctl(fd, RTC_AIE_ON, 0);
 	if (retval == -1) {
+		if (errno == EINVAL) {
+			fprintf(stderr,
+				"\n...Alarm IRQs not supported.\n");
+			goto test_PIE;
+		}
+
 		perror("RTC_AIE_ON ioctl");
 		exit(errno);
 	}
@@ -193,7 +200,7 @@ test_PIE:
 	retval = ioctl(fd, RTC_IRQP_READ, &tmp);
 	if (retval == -1) {
 		/* not all RTCs support periodic IRQs */
-		if (errno == ENOTTY) {
+		if (errno == EINVAL) {
 			fprintf(stderr, "\nNo periodic IRQ support\n");
 			goto done;
 		}
@@ -211,7 +218,7 @@ test_PIE:
 		retval = ioctl(fd, RTC_IRQP_SET, tmp);
 		if (retval == -1) {
 			/* not all RTCs can change their periodic IRQ rate */
-			if (errno == ENOTTY) {
+			if (errno == EINVAL) {
 				fprintf(stderr,
 					"\n...Periodic IRQ rate is fixed\n");
 				goto done;