summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-08-11 16:14:01 +0200
committerLinus Torvalds <torvalds@linux-foundation.org>2014-08-11 16:14:01 +0200
commitc7a19c795b4b0a3232c157ed29eea85077e95da6 (patch)
treed3916dcdea74b55453694c9f31b95b6d906e3202
parentMerge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/l... (diff)
parentdmaengine: sun6i: depends on RESET_CONTROLLER (diff)
downloadlinux-c7a19c795b4b0a3232c157ed29eea85077e95da6.tar.xz
linux-c7a19c795b4b0a3232c157ed29eea85077e95da6.zip
Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dma updates from Vinod Koul: "Some notable changes are: - new driver for AMBA AXI NBPF by Guennadi - new driver for sun6i controller by Maxime - pl330 drivers fixes from Lar's - sh-dma updates and fixes from Laurent, Geert and Kuninori - Documentation updates from Geert - drivers fixes and updates spread over dw, edma, freescale, mpc512x etc.." * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (72 commits) dmaengine: sun6i: depends on RESET_CONTROLLER dma: at_hdmac: fix invalid remaining bytes detection dmaengine: nbpfaxi: don't build this driver where it cannot be used dmaengine: nbpf_error_get_channel() can be static dma: pl08x: Use correct specifier for size_t values dmaengine: Remove the context argument to the prep_dma_cyclic operation dmaengine: nbpfaxi: convert to tasklet dmaengine: nbpfaxi: fix a theoretical race dmaengine: add a driver for AMBA AXI NBPF DMAC IP cores dmaengine: add device tree binding documentation for the nbpfaxi driver dmaengine: edma: Do not register second device when booted with DT dmaengine: edma: Do not change the error code returned from edma_alloc_slot dmaengine: rcar-dmac: Add device tree bindings documentation dmaengine: shdma: Allocate cyclic sg list dynamically dmaengine: shdma: Make channel filter ignore unrelated devices dmaengine: sh: Rework Kconfig and Makefile dmaengine: sun6i: Fix memory leaks dmaengine: sun6i: Free the interrupt before killing the tasklet dmaengine: sun6i: Remove switch statement from buswidth convertion routine dmaengine: of: kconfig: select DMA_ENGINE when DMA_OF is selected ...
-rw-r--r--Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt1
-rw-r--r--Documentation/devicetree/bindings/dma/mpc512x-dma.txt29
-rw-r--r--Documentation/devicetree/bindings/dma/nbpfaxi.txt61
-rw-r--r--Documentation/devicetree/bindings/dma/rcar-audmapp.txt29
-rw-r--r--Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt98
-rw-r--r--Documentation/devicetree/bindings/dma/ste-dma40.txt74
-rw-r--r--Documentation/devicetree/bindings/dma/sun6i-dma.txt45
-rw-r--r--Documentation/dmaengine.txt17
-rw-r--r--arch/arm/common/edma.c31
-rw-r--r--arch/powerpc/boot/dts/mpc5121.dtsi1
-rw-r--r--arch/sh/drivers/dma/dma-sh.c2
-rw-r--r--arch/sh/include/asm/dma-register.h36
-rw-r--r--arch/sh/kernel/cpu/sh4a/setup-sh7722.c24
-rw-r--r--arch/sh/kernel/cpu/sh4a/setup-sh7724.c48
-rw-r--r--arch/sh/kernel/cpu/sh4a/setup-sh7757.c64
-rw-r--r--drivers/dma/Kconfig17
-rw-r--r--drivers/dma/Makefile6
-rw-r--r--drivers/dma/TODO1
-rw-r--r--drivers/dma/amba-pl08x.c6
-rw-r--r--drivers/dma/at_hdmac.c15
-rw-r--r--drivers/dma/bcm2835-dma.c2
-rw-r--r--drivers/dma/dma-jz4740.c4
-rw-r--r--drivers/dma/dw/core.c42
-rw-r--r--drivers/dma/edma.c23
-rw-r--r--drivers/dma/ep93xx_dma.c4
-rw-r--r--drivers/dma/fsl-edma.c8
-rw-r--r--drivers/dma/fsldma.c297
-rw-r--r--drivers/dma/fsldma.h32
-rw-r--r--drivers/dma/imx-dma.c2
-rw-r--r--drivers/dma/imx-sdma.c17
-rw-r--r--drivers/dma/ipu/ipu_idmac.c14
-rw-r--r--drivers/dma/mmp_pdma.c2
-rw-r--r--drivers/dma/mmp_tdma.c2
-rw-r--r--drivers/dma/mpc512x_dma.c13
-rw-r--r--drivers/dma/mxs-dma.c10
-rw-r--r--drivers/dma/nbpfaxi.c1517
-rw-r--r--drivers/dma/of-dma.c35
-rw-r--r--drivers/dma/omap-dma.c3
-rw-r--r--drivers/dma/pl330.c964
-rw-r--r--drivers/dma/qcom_bam_dma.c20
-rw-r--r--drivers/dma/s3c24xx-dma.c3
-rw-r--r--drivers/dma/sa11x0-dma.c2
-rw-r--r--drivers/dma/sh/Kconfig24
-rw-r--r--drivers/dma/sh/Makefile16
-rw-r--r--drivers/dma/sh/rcar-audmapp.c114
-rw-r--r--drivers/dma/sh/shdma-arm.h4
-rw-r--r--drivers/dma/sh/shdma-base.c103
-rw-r--r--drivers/dma/sh/shdma.h2
-rw-r--r--drivers/dma/sh/shdmac.c15
-rw-r--r--drivers/dma/sirf-dma.c2
-rw-r--r--drivers/dma/ste_dma40.c3
-rw-r--r--drivers/dma/sun6i-dma.c1053
-rw-r--r--drivers/dma/tegra20-apb-dma.c2
-rw-r--r--include/dt-bindings/dma/nbpfaxi.h20
-rw-r--r--include/linux/dmaengine.h5
-rw-r--r--include/linux/of_dma.h4
-rw-r--r--include/linux/platform_data/dma-imx.h1
-rw-r--r--include/linux/platform_data/edma.h2
-rw-r--r--include/linux/sh_dma.h24
59 files changed, 4031 insertions, 984 deletions
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
index e577196a12c0..4659fd952301 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -47,6 +47,7 @@ The full ID of peripheral types can be found below.
20 ASRC
21 ESAI
22 SSI Dual FIFO (needs firmware ver >= 2)
+ 23 Shared ASRC
The third cell specifies the transfer priority as below.
diff --git a/Documentation/devicetree/bindings/dma/mpc512x-dma.txt b/Documentation/devicetree/bindings/dma/mpc512x-dma.txt
new file mode 100644
index 000000000000..a6511df165c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mpc512x-dma.txt
@@ -0,0 +1,29 @@
+* Freescale MPC512x and MPC8308 DMA Controller
+
+The DMA controller in Freescale MPC512x and MPC8308 SoCs can move
+blocks of memory contents between memory and peripherals or
+from memory to memory.
+
+Refer to "Generic DMA Controller and DMA request bindings" in
+the dma/dma.txt file for a more detailed description of binding.
+
+Required properties:
+- compatible: should be "fsl,mpc5121-dma" or "fsl,mpc8308-dma";
+- reg: should contain the DMA controller registers location and length;
+- interrupt for the DMA controller: syntax of interrupt client node
+ is described in interrupt-controller/interrupts.txt file.
+- #dma-cells: the length of the DMA specifier, must be <1>.
+ Each channel of this DMA controller has a peripheral request line,
+ the assignment is fixed in hardware. This one cell
+ in dmas property of a client device represents the channel number.
+
+Example:
+
+ dma0: dma@14000 {
+ compatible = "fsl,mpc5121-dma";
+ reg = <0x14000 0x1800>;
+ interrupts = <65 0x8>;
+ #dma-cells = <1>;
+ };
+
+DMA clients must use the format described in dma/dma.txt file.
diff --git a/Documentation/devicetree/bindings/dma/nbpfaxi.txt b/Documentation/devicetree/bindings/dma/nbpfaxi.txt
new file mode 100644
index 000000000000..d5e2522b9ec1
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/nbpfaxi.txt
@@ -0,0 +1,61 @@
+* Renesas "Type-AXI" NBPFAXI* DMA controllers
+
+* DMA controller
+
+Required properties
+
+- compatible: must be one of
+ "renesas,nbpfaxi64dmac1b4"
+ "renesas,nbpfaxi64dmac1b8"
+ "renesas,nbpfaxi64dmac1b16"
+ "renesas,nbpfaxi64dmac4b4"
+ "renesas,nbpfaxi64dmac4b8"
+ "renesas,nbpfaxi64dmac4b16"
+ "renesas,nbpfaxi64dmac8b4"
+ "renesas,nbpfaxi64dmac8b8"
+ "renesas,nbpfaxi64dmac8b16"
+- #dma-cells: must be 2: the first integer is a terminal number, to which this
+ slave is connected, the second one is flags. Flags is a bitmask
+ with the following bits defined:
+
+#define NBPF_SLAVE_RQ_HIGH 1
+#define NBPF_SLAVE_RQ_LOW 2
+#define NBPF_SLAVE_RQ_LEVEL 4
+
+Optional properties:
+
+You can use dma-channels and dma-requests as described in dma.txt, although they
+won't be used, this information is derived from the compatibility string.
+
+Example:
+
+ dma: dma-controller@48000000 {
+ compatible = "renesas,nbpfaxi64dmac8b4";
+ reg = <0x48000000 0x400>;
+ interrupts = <0 12 0x4
+ 0 13 0x4
+ 0 14 0x4
+ 0 15 0x4
+ 0 16 0x4
+ 0 17 0x4
+ 0 18 0x4
+ 0 19 0x4>;
+ #dma-cells = <2>;
+ dma-channels = <8>;
+ dma-requests = <8>;
+ };
+
+* DMA client
+
+Required properties:
+
+dmas and dma-names are required, as described in dma.txt.
+
+Example:
+
+#include <dt-bindings/dma/nbpfaxi.h>
+
+...
+ dmas = <&dma 0 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)
+ &dma 1 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+ dma-names = "rx", "tx";
diff --git a/Documentation/devicetree/bindings/dma/rcar-audmapp.txt b/Documentation/devicetree/bindings/dma/rcar-audmapp.txt
new file mode 100644
index 000000000000..9f1d750d76de
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/rcar-audmapp.txt
@@ -0,0 +1,29 @@
+* R-Car Audio DMAC peri peri Device Tree bindings
+
+Required properties:
+- compatible: should be "renesas,rcar-audmapp"
+- #dma-cells: should be <1>, see "dmas" property below
+
+Example:
+ audmapp: audio-dma-pp@0xec740000 {
+ compatible = "renesas,rcar-audmapp";
+ #dma-cells = <1>;
+
+ reg = <0 0xec740000 0 0x200>;
+ };
+
+
+* DMA client
+
+Required properties:
+- dmas: a list of <[DMA multiplexer phandle] [SRS/DRS value]> pairs,
+ where SRS/DRS values are fixed handles, specified in the SoC
+ manual as the value that would be written into the PDMACHCR.
+- dma-names: a list of DMA channel names, one per "dmas" entry
+
+Example:
+
+ dmas = <&audmapp 0x2d00
+ &audmapp 0x3700>;
+ dma-names = "src0_ssiu0",
+ "dvc0_ssiu0";
diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
new file mode 100644
index 000000000000..df0f48bcf75a
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
@@ -0,0 +1,98 @@
+* Renesas R-Car DMA Controller Device Tree bindings
+
+Renesas R-Car Generation 2 SoCs have have multiple multi-channel DMA
+controller instances named DMAC capable of serving multiple clients. Channels
+can be dedicated to specific clients or shared between a large number of
+clients.
+
+DMA clients are connected to the DMAC ports referenced by an 8-bit identifier
+called MID/RID.
+
+Each DMA client is connected to one dedicated port of the DMAC, identified by
+an 8-bit port number called the MID/RID. A DMA controller can thus serve up to
+256 clients in total. When the number of hardware channels is lower than the
+number of clients to be served, channels must be shared between multiple DMA
+clients. The association of DMA clients to DMAC channels is fully dynamic and
+not described in these device tree bindings.
+
+Required Properties:
+
+- compatible: must contain "renesas,rcar-dmac"
+
+- reg: base address and length of the registers block for the DMAC
+
+- interrupts: interrupt specifiers for the DMAC, one for each entry in
+ interrupt-names.
+- interrupt-names: one entry per channel, named "ch%u", where %u is the
+ channel number ranging from zero to the number of channels minus one.
+
+- clock-names: "fck" for the functional clock
+- clocks: a list of phandle + clock-specifier pairs, one for each entry
+ in clock-names.
+- clock-names: must contain "fck" for the functional clock.
+
+- #dma-cells: must be <1>, the cell specifies the MID/RID of the DMAC port
+ connected to the DMA client
+- dma-channels: number of DMA channels
+
+Example: R8A7790 (R-Car H2) SYS-DMACs
+
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x20000>;
+ interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
+ 0 200 IRQ_TYPE_LEVEL_HIGH
+ 0 201 IRQ_TYPE_LEVEL_HIGH
+ 0 202 IRQ_TYPE_LEVEL_HIGH
+ 0 203 IRQ_TYPE_LEVEL_HIGH
+ 0 204 IRQ_TYPE_LEVEL_HIGH
+ 0 205 IRQ_TYPE_LEVEL_HIGH
+ 0 206 IRQ_TYPE_LEVEL_HIGH
+ 0 207 IRQ_TYPE_LEVEL_HIGH
+ 0 208 IRQ_TYPE_LEVEL_HIGH
+ 0 209 IRQ_TYPE_LEVEL_HIGH
+ 0 210 IRQ_TYPE_LEVEL_HIGH
+ 0 211 IRQ_TYPE_LEVEL_HIGH
+ 0 212 IRQ_TYPE_LEVEL_HIGH
+ 0 213 IRQ_TYPE_LEVEL_HIGH
+ 0 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>;
+ clock-names = "fck";
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ dmac1: dma-controller@e6720000 {
+ compatible = "renesas,rcar-dmac";
+ reg = <0 0xe6720000 0 0x20000>;
+ interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+ 0 216 IRQ_TYPE_LEVEL_HIGH
+ 0 217 IRQ_TYPE_LEVEL_HIGH
+ 0 218 IRQ_TYPE_LEVEL_HIGH
+ 0 219 IRQ_TYPE_LEVEL_HIGH
+ 0 308 IRQ_TYPE_LEVEL_HIGH
+ 0 309 IRQ_TYPE_LEVEL_HIGH
+ 0 310 IRQ_TYPE_LEVEL_HIGH
+ 0 311 IRQ_TYPE_LEVEL_HIGH
+ 0 312 IRQ_TYPE_LEVEL_HIGH
+ 0 313 IRQ_TYPE_LEVEL_HIGH
+ 0 314 IRQ_TYPE_LEVEL_HIGH
+ 0 315 IRQ_TYPE_LEVEL_HIGH
+ 0 316 IRQ_TYPE_LEVEL_HIGH
+ 0 317 IRQ_TYPE_LEVEL_HIGH
+ 0 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>;
+ clock-names = "fck";
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt
index 1f5729f10621..95800ab37bb0 100644
--- a/Documentation/devicetree/bindings/dma/ste-dma40.txt
+++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt
@@ -35,9 +35,11 @@ Required properties:
Each dmas request consists of 4 cells:
1. A phandle pointing to the DMA controller
- 2. Device Type
+ 2. Device signal number, the signal line for single and burst requests
+ connected from the device to the DMA40 engine
3. The DMA request line number (only when 'use fixed channel' is set)
- 4. A 32bit mask specifying; mode, direction and endianness [NB: This list will grow]
+ 4. A 32bit mask specifying; mode, direction and endianness
+ [NB: This list will grow]
0x00000001: Mode:
Logical channel when unset
Physical channel when set
@@ -54,6 +56,74 @@ Each dmas request consists of 4 cells:
Normal priority when unset
High priority when set
+Existing signal numbers for the DB8500 ASIC. Unless specified, the signals are
+bidirectional, i.e. the same for RX and TX operations:
+
+0: SPI controller 0
+1: SD/MMC controller 0 (unused)
+2: SD/MMC controller 1 (unused)
+3: SD/MMC controller 2 (unused)
+4: I2C port 1
+5: I2C port 3
+6: I2C port 2
+7: I2C port 4
+8: Synchronous Serial Port SSP0
+9: Synchronous Serial Port SSP1
+10: Multi-Channel Display Engine MCDE RX
+11: UART port 2
+12: UART port 1
+13: UART port 0
+14: Multirate Serial Port MSP2
+15: I2C port 0
+16: USB OTG in/out endpoints 7 & 15
+17: USB OTG in/out endpoints 6 & 14
+18: USB OTG in/out endpoints 5 & 13
+19: USB OTG in/out endpoints 4 & 12
+20: SLIMbus or HSI channel 0
+21: SLIMbus or HSI channel 1
+22: SLIMbus or HSI channel 2
+23: SLIMbus or HSI channel 3
+24: Multimedia DSP SXA0
+25: Multimedia DSP SXA1
+26: Multimedia DSP SXA2
+27: Multimedia DSP SXA3
+28: SD/MM controller 2
+29: SD/MM controller 0
+30: MSP port 1 on DB8500 v1, MSP port 3 on DB8500 v2
+31: MSP port 0 or SLIMbus channel 0
+32: SD/MM controller 1
+33: SPI controller 2
+34: i2c3 RX2 TX2
+35: SPI controller 1
+36: USB OTG in/out endpoints 3 & 11
+37: USB OTG in/out endpoints 2 & 10
+38: USB OTG in/out endpoints 1 & 9
+39: USB OTG in/out endpoints 8
+40: SPI controller 3
+41: SD/MM controller 3
+42: SD/MM controller 4
+43: SD/MM controller 5
+44: Multimedia DSP SXA4
+45: Multimedia DSP SXA5
+46: SLIMbus channel 8 or Multimedia DSP SXA6
+47: SLIMbus channel 9 or Multimedia DSP SXA7
+48: Crypto Accelerator 1
+49: Crypto Accelerator 1 TX or Hash Accelerator 1 TX
+50: Hash Accelerator 1 TX
+51: memcpy TX (to be used by the DMA driver for memcpy operations)
+52: SLIMbus or HSI channel 4
+53: SLIMbus or HSI channel 5
+54: SLIMbus or HSI channel 6
+55: SLIMbus or HSI channel 7
+56: memcpy (to be used by the DMA driver for memcpy operations)
+57: memcpy (to be used by the DMA driver for memcpy operations)
+58: memcpy (to be used by the DMA driver for memcpy operations)
+59: memcpy (to be used by the DMA driver for memcpy operations)
+60: memcpy (to be used by the DMA driver for memcpy operations)
+61: Crypto Accelerator 0
+62: Crypto Accelerator 0 TX or Hash Accelerator 0 TX
+63: Hash Accelerator 0 TX
+
Example:
uart@80120000 {
diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
new file mode 100644
index 000000000000..3e145c1675b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
@@ -0,0 +1,45 @@
+Allwinner A31 DMA Controller
+
+This driver follows the generic DMA bindings defined in dma.txt.
+
+Required properties:
+
+- compatible: Must be "allwinner,sun6i-a31-dma"
+- reg: Should contain the registers base address and length
+- interrupts: Should contain a reference to the interrupt used by this device
+- clocks: Should contain a reference to the parent AHB clock
+- resets: Should contain a reference to the reset controller asserting
+ this device in reset
+- #dma-cells : Should be 1, a single cell holding a line request number
+
+Example:
+ dma: dma-controller@01c02000 {
+ compatible = "allwinner,sun6i-a31-dma";
+ reg = <0x01c02000 0x1000>;
+ interrupts = <0 50 4>;
+ clocks = <&ahb1_gates 6>;
+ resets = <&ahb1_rst 6>;
+ #dma-cells = <1>;
+ };
+
+Clients:
+
+DMA clients connected to the A31 DMA controller must use the format
+described in the dma.txt file, using a two-cell specifier for each
+channel: a phandle plus one integer cells.
+The two cells in order are:
+
+1. A phandle pointing to the DMA controller.
+2. The port ID as specified in the datasheet
+
+Example:
+spi2: spi@01c6a000 {
+ compatible = "allwinner,sun6i-a31-spi";
+ reg = <0x01c6a000 0x1000>;
+ interrupts = <0 67 4>;
+ clocks = <&ahb1_gates 22>, <&spi2_clk>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma 25>, <&dma 25>;
+ dma-names = "rx", "tx";
+ resets = <&ahb1_rst 22>;
+};
diff --git a/Documentation/dmaengine.txt b/Documentation/dmaengine.txt
index 879b6e31e2da..573e28ce9751 100644
--- a/Documentation/dmaengine.txt
+++ b/Documentation/dmaengine.txt
@@ -84,31 +84,32 @@ The slave DMA usage consists of following steps:
the given transaction.
Interface:
- struct dma_async_tx_descriptor *(*chan->device->device_prep_slave_sg)(
+ struct dma_async_tx_descriptor *dmaengine_prep_slave_sg(
struct dma_chan *chan, struct scatterlist *sgl,
unsigned int sg_len, enum dma_data_direction direction,
unsigned long flags);
- struct dma_async_tx_descriptor *(*chan->device->device_prep_dma_cyclic)(
+ struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic(
struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
size_t period_len, enum dma_data_direction direction);
- struct dma_async_tx_descriptor *(*device_prep_interleaved_dma)(
+ struct dma_async_tx_descriptor *dmaengine_prep_interleaved_dma(
struct dma_chan *chan, struct dma_interleaved_template *xt,
unsigned long flags);
The peripheral driver is expected to have mapped the scatterlist for
the DMA operation prior to calling device_prep_slave_sg, and must
keep the scatterlist mapped until the DMA operation has completed.
- The scatterlist must be mapped using the DMA struct device. So,
- normal setup should look like this:
+ The scatterlist must be mapped using the DMA struct device.
+ If a mapping needs to be synchronized later, dma_sync_*_for_*() must be
+ called using the DMA struct device, too.
+ So, normal setup should look like this:
nr_sg = dma_map_sg(chan->device->dev, sgl, sg_len);
if (nr_sg == 0)
/* error */
- desc = chan->device->device_prep_slave_sg(chan, sgl, nr_sg,
- direction, flags);
+ desc = dmaengine_prep_slave_sg(chan, sgl, nr_sg, direction, flags);
Once a descriptor has been obtained, the callback information can be
added and the descriptor must then be submitted. Some DMA engine
@@ -188,7 +189,7 @@ Further APIs:
description of this API.
This can be used in conjunction with dma_async_is_complete() and
- the cookie returned from 'descriptor->submit()' to check for
+ the cookie returned from dmaengine_submit() to check for
completion of a specific DMA transaction.
Note:
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index 485be42519b9..88099175fc56 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -1414,6 +1414,34 @@ void edma_clear_event(unsigned channel)
}
EXPORT_SYMBOL(edma_clear_event);
+/*
+ * edma_assign_channel_eventq - move given channel to desired eventq
+ * Arguments:
+ * channel - channel number
+ * eventq_no - queue to move the channel
+ *
+ * Can be used to move a channel to a selected event queue.
+ */
+void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no)
+{
+ unsigned ctlr;
+
+ ctlr = EDMA_CTLR(channel);
+ channel = EDMA_CHAN_SLOT(channel);
+
+ if (channel >= edma_cc[ctlr]->num_channels)
+ return;
+
+ /* default to low priority queue */
+ if (eventq_no == EVENTQ_DEFAULT)
+ eventq_no = edma_cc[ctlr]->default_queue;
+ if (eventq_no >= edma_cc[ctlr]->num_tc)
+ return;
+
+ map_dmach_queue(ctlr, channel, eventq_no);
+}
+EXPORT_SYMBOL(edma_assign_channel_eventq);
+
static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata,
struct edma *edma_cc)
{
@@ -1470,7 +1498,8 @@ static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata,
queue_priority_map[i][1] = -1;
pdata->queue_priority_mapping = queue_priority_map;
- pdata->default_queue = 0;
+ /* Default queue has the lowest priority */
+ pdata->default_queue = i - 1;
return 0;
}
diff --git a/arch/powerpc/boot/dts/mpc5121.dtsi b/arch/powerpc/boot/dts/mpc5121.dtsi
index 2c0e1552d20b..7f9d14f5c4da 100644
--- a/arch/powerpc/boot/dts/mpc5121.dtsi
+++ b/arch/powerpc/boot/dts/mpc5121.dtsi
@@ -498,6 +498,7 @@
compatible = "fsl,mpc5121-dma";
reg = <0x14000 0x1800>;
interrupts = <65 0x8>;
+ #dma-cells = <1>;
};
};
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index b22565623142..afde2a7d3eb3 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -25,7 +25,7 @@
* Define the default configuration for dual address memory-memory transfer.
* The 0x400 value represents auto-request, external->external.
*/
-#define RS_DUAL (DM_INC | SM_INC | 0x400 | TS_INDEX2VAL(XMIT_SZ_32BIT))
+#define RS_DUAL (DM_INC | SM_INC | RS_AUTO | TS_INDEX2VAL(XMIT_SZ_32BIT))
static unsigned long dma_find_base(unsigned int chan)
{
diff --git a/arch/sh/include/asm/dma-register.h b/arch/sh/include/asm/dma-register.h
index 51cd78feacff..c757b47e6b64 100644
--- a/arch/sh/include/asm/dma-register.h
+++ b/arch/sh/include/asm/dma-register.h
@@ -13,17 +13,17 @@
#ifndef DMA_REGISTER_H
#define DMA_REGISTER_H
-/* DMA register */
-#define SAR 0x00
-#define DAR 0x04
-#define TCR 0x08
-#define CHCR 0x0C
-#define DMAOR 0x40
+/* DMA registers */
+#define SAR 0x00 /* Source Address Register */
+#define DAR 0x04 /* Destination Address Register */
+#define TCR 0x08 /* Transfer Count Register */
+#define CHCR 0x0C /* Channel Control Register */
+#define DMAOR 0x40 /* DMA Operation Register */
/* DMAOR definitions */
-#define DMAOR_AE 0x00000004
+#define DMAOR_AE 0x00000004 /* Address Error Flag */
#define DMAOR_NMIF 0x00000002
-#define DMAOR_DME 0x00000001
+#define DMAOR_DME 0x00000001 /* DMA Master Enable */
/* Definitions for the SuperH DMAC */
#define REQ_L 0x00000000
@@ -34,18 +34,20 @@
#define ACK_W 0x00020000
#define ACK_H 0x00000000
#define ACK_L 0x00010000
-#define DM_INC 0x00004000
-#define DM_DEC 0x00008000
-#define DM_FIX 0x0000c000
-#define SM_INC 0x00001000
-#define SM_DEC 0x00002000
-#define SM_FIX 0x00003000
+#define DM_INC 0x00004000 /* Destination addresses are incremented */
+#define DM_DEC 0x00008000 /* Destination addresses are decremented */
+#define DM_FIX 0x0000c000 /* Destination address is fixed */
+#define SM_INC 0x00001000 /* Source addresses are incremented */
+#define SM_DEC 0x00002000 /* Source addresses are decremented */
+#define SM_FIX 0x00003000 /* Source address is fixed */
#define RS_IN 0x00000200
#define RS_OUT 0x00000300
+#define RS_AUTO 0x00000400 /* Auto Request */
+#define RS_ERS 0x00000800 /* DMA extended resource selector */
#define TS_BLK 0x00000040
#define TM_BUR 0x00000020
-#define CHCR_DE 0x00000001
-#define CHCR_TE 0x00000002
-#define CHCR_IE 0x00000004
+#define CHCR_DE 0x00000001 /* DMA Enable */
+#define CHCR_TE 0x00000002 /* Transfer End Flag */
+#define CHCR_IE 0x00000004 /* Interrupt Enable */
#endif
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 57f83a92a505..7aa733307afc 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -30,62 +30,62 @@ static const struct sh_dmae_slave_config sh7722_dmae_slaves[] = {
{
.slave_id = SHDMA_SLAVE_SCIF0_TX,
.addr = 0xffe0000c,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x21,
}, {
.slave_id = SHDMA_SLAVE_SCIF0_RX,
.addr = 0xffe00014,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x22,
}, {
.slave_id = SHDMA_SLAVE_SCIF1_TX,
.addr = 0xffe1000c,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x25,
}, {
.slave_id = SHDMA_SLAVE_SCIF1_RX,
.addr = 0xffe10014,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x26,
}, {
.slave_id = SHDMA_SLAVE_SCIF2_TX,
.addr = 0xffe2000c,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x29,
}, {
.slave_id = SHDMA_SLAVE_SCIF2_RX,
.addr = 0xffe20014,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x2a,
}, {
.slave_id = SHDMA_SLAVE_SIUA_TX,
.addr = 0xa454c098,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
.mid_rid = 0xb1,
}, {
.slave_id = SHDMA_SLAVE_SIUA_RX,
.addr = 0xa454c090,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
.mid_rid = 0xb2,
}, {
.slave_id = SHDMA_SLAVE_SIUB_TX,
.addr = 0xa454c09c,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
.mid_rid = 0xb5,
}, {
.slave_id = SHDMA_SLAVE_SIUB_RX,
.addr = 0xa454c094,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
.mid_rid = 0xb6,
}, {
.slave_id = SHDMA_SLAVE_SDHI0_TX,
.addr = 0x04ce0030,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+ .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
.mid_rid = 0xc1,
}, {
.slave_id = SHDMA_SLAVE_SDHI0_RX,
.addr = 0x04ce0030,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+ .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
.mid_rid = 0xc2,
},
};
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
index b9e84b1d3aa7..ea5780b3c7f6 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
@@ -36,122 +36,122 @@ static const struct sh_dmae_slave_config sh7724_dmae_slaves[] = {
{
.slave_id = SHDMA_SLAVE_SCIF0_TX,
.addr = 0xffe0000c,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x21,
}, {
.slave_id = SHDMA_SLAVE_SCIF0_RX,
.addr = 0xffe00014,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x22,
}, {
.slave_id = SHDMA_SLAVE_SCIF1_TX,
.addr = 0xffe1000c,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x25,
}, {
.slave_id = SHDMA_SLAVE_SCIF1_RX,
.addr = 0xffe10014,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x26,
}, {
.slave_id = SHDMA_SLAVE_SCIF2_TX,
.addr = 0xffe2000c,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x29,
}, {
.slave_id = SHDMA_SLAVE_SCIF2_RX,
.addr = 0xffe20014,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x2a,
}, {
.slave_id = SHDMA_SLAVE_SCIF3_TX,
.addr = 0xa4e30020,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x2d,
}, {
.slave_id = SHDMA_SLAVE_SCIF3_RX,
.addr = 0xa4e30024,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x2e,
}, {
.slave_id = SHDMA_SLAVE_SCIF4_TX,
.addr = 0xa4e40020,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x31,
}, {
.slave_id = SHDMA_SLAVE_SCIF4_RX,
.addr = 0xa4e40024,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x32,
}, {
.slave_id = SHDMA_SLAVE_SCIF5_TX,
.addr = 0xa4e50020,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x35,
}, {
.slave_id = SHDMA_SLAVE_SCIF5_RX,
.addr = 0xa4e50024,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+ .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x36,
}, {
.slave_id = SHDMA_SLAVE_USB0D0_TX,
.addr = 0xA4D80100,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
.mid_rid = 0x73,
}, {
.slave_id = SHDMA_SLAVE_USB0D0_RX,
.addr = 0xA4D80100,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
.mid_rid = 0x73,
}, {
.slave_id = SHDMA_SLAVE_USB0D1_TX,
.addr = 0xA4D80120,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
.mid_rid = 0x77,
}, {
.slave_id = SHDMA_SLAVE_USB0D1_RX,
.addr = 0xA4D80120,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
.mid_rid = 0x77,
}, {
.slave_id = SHDMA_SLAVE_USB1D0_TX,
.addr = 0xA4D90100,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
.mid_rid = 0xab,
}, {
.slave_id = SHDMA_SLAVE_USB1D0_RX,
.addr = 0xA4D90100,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
.mid_rid = 0xab,
}, {
.slave_id = SHDMA_SLAVE_USB1D1_TX,
.addr = 0xA4D90120,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
.mid_rid = 0xaf,
}, {
.slave_id = SHDMA_SLAVE_USB1D1_RX,
.addr = 0xA4D90120,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT),
.mid_rid = 0xaf,
}, {
.slave_id = SHDMA_SLAVE_SDHI0_TX,
.addr = 0x04ce0030,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+ .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
.mid_rid = 0xc1,
}, {
.slave_id = SHDMA_SLAVE_SDHI0_RX,
.addr = 0x04ce0030,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+ .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
.mid_rid = 0xc2,
}, {
.slave_id = SHDMA_SLAVE_SDHI1_TX,
.addr = 0x04cf0030,
- .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+ .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
.mid_rid = 0xc9,
}, {
.slave_id = SHDMA_SLAVE_SDHI1_RX,
.addr = 0x04cf0030,
- .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+ .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT),
.mid_rid = 0xca,
},
};
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
index 7b24ec4b409a..18bcd70cd813 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
@@ -123,28 +123,28 @@ static const struct sh_dmae_slave_config sh7757_dmae0_slaves[] = {
{
.slave_id = SHDMA_SLAVE_SDHI_TX,
.addr = 0x1fe50030,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = SM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_16BIT),
.mid_rid = 0xc5,
},
{
.slave_id = SHDMA_SLAVE_SDHI_RX,
.addr = 0x1fe50030,
- .chcr = DM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_16BIT),
.mid_rid = 0xc6,
},
{
.slave_id = SHDMA_SLAVE_MMCIF_TX,
.addr = 0x1fcb0034,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = SM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_32BIT),
.mid_rid = 0xd3,
},
{
.slave_id = SHDMA_SLAVE_MMCIF_RX,
.addr = 0x1fcb0034,
- .chcr = DM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_32BIT),
.mid_rid = 0xd7,
},
@@ -154,56 +154,56 @@ static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = {
{
.slave_id = SHDMA_SLAVE_SCIF2_TX,
.addr = 0x1f4b000c,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = SM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x21,
},
{
.slave_id = SHDMA_SLAVE_SCIF2_RX,
.addr = 0x1f4b0014,
- .chcr = DM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x22,
},
{
.slave_id = SHDMA_SLAVE_SCIF3_TX,
.addr = 0x1f4c000c,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = SM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x29,
},
{
.slave_id = SHDMA_SLAVE_SCIF3_RX,
.addr = 0x1f4c0014,
- .chcr = DM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x2a,
},
{
.slave_id = SHDMA_SLAVE_SCIF4_TX,
.addr = 0x1f4d000c,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = SM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x41,
},
{
.slave_id = SHDMA_SLAVE_SCIF4_RX,
.addr = 0x1f4d0014,
- .chcr = DM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x42,
},
{
.slave_id = SHDMA_SLAVE_RSPI_TX,
.addr = 0xfe480004,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = SM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_16BIT),
.mid_rid = 0xc1,
},
{
.slave_id = SHDMA_SLAVE_RSPI_RX,
.addr = 0xfe480004,
- .chcr = DM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_16BIT),
.mid_rid = 0xc2,
},
@@ -213,70 +213,70 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = {
{
.slave_id = SHDMA_SLAVE_RIIC0_TX,
.addr = 0x1e500012,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = SM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x21,
},
{
.slave_id = SHDMA_SLAVE_RIIC0_RX,
.addr = 0x1e500013,
- .chcr = DM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x22,
},
{
.slave_id = SHDMA_SLAVE_RIIC1_TX,
.addr = 0x1e510012,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = SM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x29,
},
{
.slave_id = SHDMA_SLAVE_RIIC1_RX,
.addr = 0x1e510013,
- .chcr = DM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x2a,
},
{
.slave_id = SHDMA_SLAVE_RIIC2_TX,
.addr = 0x1e520012,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = SM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0xa1,
},
{
.slave_id = SHDMA_SLAVE_RIIC2_RX,
.addr = 0x1e520013,
- .chcr = DM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0xa2,
},
{
.slave_id = SHDMA_SLAVE_RIIC3_TX,
.addr = 0x1e530012,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = SM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0xa9,
},
{
.slave_id = SHDMA_SLAVE_RIIC3_RX,
.addr = 0x1e530013,
- .chcr = DM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0xaf,
},
{
.slave_id = SHDMA_SLAVE_RIIC4_TX,
.addr = 0x1e540012,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = SM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0xc5,
},
{
.slave_id = SHDMA_SLAVE_RIIC4_RX,
.addr = 0x1e540013,
- .chcr = DM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0xc6,
},
@@ -286,70 +286,70 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = {
{
.slave_id = SHDMA_SLAVE_RIIC5_TX,
.addr = 0x1e550012,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = SM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x21,
},
{
.slave_id = SHDMA_SLAVE_RIIC5_RX,
.addr = 0x1e550013,
- .chcr = DM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x22,
},
{
.slave_id = SHDMA_SLAVE_RIIC6_TX,
.addr = 0x1e560012,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = SM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x29,
},
{
.slave_id = SHDMA_SLAVE_RIIC6_RX,
.addr = 0x1e560013,
- .chcr = DM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x2a,
},
{
.slave_id = SHDMA_SLAVE_RIIC7_TX,
.addr = 0x1e570012,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = SM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x41,
},
{
.slave_id = SHDMA_SLAVE_RIIC7_RX,
.addr = 0x1e570013,
- .chcr = DM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x42,
},
{
.slave_id = SHDMA_SLAVE_RIIC8_TX,
.addr = 0x1e580012,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = SM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x45,
},
{
.slave_id = SHDMA_SLAVE_RIIC8_RX,
.addr = 0x1e580013,
- .chcr = DM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x46,
},
{
.slave_id = SHDMA_SLAVE_RIIC9_TX,
.addr = 0x1e590012,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = SM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x51,
},
{
.slave_id = SHDMA_SLAVE_RIIC9_RX,
.addr = 0x1e590013,
- .chcr = DM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | RS_ERS | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x52,
},
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 8f6afbf9ba54..9b1ea0ef59af 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -393,6 +393,22 @@ config XILINX_VDMA
channels, Memory Mapped to Stream (MM2S) and Stream to
Memory Mapped (S2MM) for the data transfers.
+config DMA_SUN6I
+ tristate "Allwinner A31 SoCs DMA support"
+ depends on MACH_SUN6I || COMPILE_TEST
+ depends on RESET_CONTROLLER
+ select DMA_ENGINE
+ select DMA_VIRTUAL_CHANNELS
+ help
+ Support for the DMA engine for Allwinner A31 SoCs.
+
+config NBPFAXI_DMA
+ tristate "Renesas Type-AXI NBPF DMA support"
+ select DMA_ENGINE
+ depends on ARM || COMPILE_TEST
+ help
+ Support for "Type-AXI" NBPF DMA IPs from Renesas
+
config DMA_ENGINE
bool
@@ -406,6 +422,7 @@ config DMA_ACPI
config DMA_OF
def_bool y
depends on OF
+ select DMA_ENGINE
comment "DMA Clients"
depends on DMA_ENGINE
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index bd9e7fa928bd..c6adb925f0b9 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -1,5 +1,5 @@
-ccflags-$(CONFIG_DMADEVICES_DEBUG) := -DDEBUG
-ccflags-$(CONFIG_DMADEVICES_VDEBUG) += -DVERBOSE_DEBUG
+subdir-ccflags-$(CONFIG_DMADEVICES_DEBUG) := -DDEBUG
+subdir-ccflags-$(CONFIG_DMADEVICES_VDEBUG) += -DVERBOSE_DEBUG
obj-$(CONFIG_DMA_ENGINE) += dmaengine.o
obj-$(CONFIG_DMA_VIRTUAL_CHANNELS) += virt-dma.o
@@ -48,3 +48,5 @@ obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
obj-$(CONFIG_QCOM_BAM_DMA) += qcom_bam_dma.o
obj-y += xilinx/
obj-$(CONFIG_INTEL_MIC_X100_DMA) += mic_x100_dma.o
+obj-$(CONFIG_NBPFAXI_DMA) += nbpfaxi.o
+obj-$(CONFIG_DMA_SUN6I) += sun6i-dma.o
diff --git a/drivers/dma/TODO b/drivers/dma/TODO
index 734ed0206cd5..b8045cd42ee1 100644
--- a/drivers/dma/TODO
+++ b/drivers/dma/TODO
@@ -7,7 +7,6 @@ TODO for slave dma
- imx-dma
- imx-sdma
- mxs-dma.c
- - dw_dmac
- intel_mid_dma
4. Check other subsystems for dma drivers and merge/move to dmaengine
5. Remove dma_slave_config's dma direction.
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index 8114731a1c62..e34024b000a4 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -1040,7 +1040,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
if (early_bytes) {
dev_vdbg(&pl08x->adev->dev,
- "%s byte width LLIs (remain 0x%08x)\n",
+ "%s byte width LLIs (remain 0x%08zx)\n",
__func__, bd.remainder);
prep_byte_width_lli(pl08x, &bd, &cctl, early_bytes,
num_llis++, &total_bytes);
@@ -1653,7 +1653,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
static struct dma_async_tx_descriptor *pl08x_prep_dma_cyclic(
struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
size_t period_len, enum dma_transfer_direction direction,
- unsigned long flags, void *context)
+ unsigned long flags)
{
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
struct pl08x_driver_data *pl08x = plchan->host;
@@ -1662,7 +1662,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_cyclic(
dma_addr_t slave_addr;
dev_dbg(&pl08x->adev->dev,
- "%s prepare cyclic transaction of %d/%d bytes %s %s\n",
+ "%s prepare cyclic transaction of %zd/%zd bytes %s %s\n",
__func__, period_len, buf_len,
direction == DMA_MEM_TO_DEV ? "to" : "from",
plchan->name);
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index c13a3bb0f594..ca9dd2613283 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -294,14 +294,16 @@ static int atc_get_bytes_left(struct dma_chan *chan)
ret = -EINVAL;
goto out;
}
- atchan->remain_desc -= (desc_cur->lli.ctrla & ATC_BTSIZE_MAX)
- << (desc_first->tx_width);
- if (atchan->remain_desc < 0) {
+
+ count = (desc_cur->lli.ctrla & ATC_BTSIZE_MAX)
+ << desc_first->tx_width;
+ if (atchan->remain_desc < count) {
ret = -EINVAL;
goto out;
- } else {
- ret = atchan->remain_desc;
}
+
+ atchan->remain_desc -= count;
+ ret = atchan->remain_desc;
} else {
/*
* Get residual bytes when current
@@ -893,12 +895,11 @@ atc_dma_cyclic_fill_desc(struct dma_chan *chan, struct at_desc *desc,
* @period_len: number of bytes for each period
* @direction: transfer direction, to or from device
* @flags: tx descriptor status flags
- * @context: transfer context (ignored)
*/
static struct dma_async_tx_descriptor *
atc_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
size_t period_len, enum dma_transfer_direction direction,
- unsigned long flags, void *context)
+ unsigned long flags)
{
struct at_dma_chan *atchan = to_at_dma_chan(chan);
struct at_dma_slave *atslave = chan->private;
diff --git a/drivers/dma/bcm2835-dma.c b/drivers/dma/bcm2835-dma.c
index a03602164e3e..68007974961a 100644
--- a/drivers/dma/bcm2835-dma.c
+++ b/drivers/dma/bcm2835-dma.c
@@ -335,7 +335,7 @@ static void bcm2835_dma_issue_pending(struct dma_chan *chan)
static struct dma_async_tx_descriptor *bcm2835_dma_prep_dma_cyclic(
struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
size_t period_len, enum dma_transfer_direction direction,
- unsigned long flags, void *context)
+ unsigned long flags)
{
struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
enum dma_slave_buswidth dev_width;
diff --git a/drivers/dma/dma-jz4740.c b/drivers/dma/dma-jz4740.c
index 94c380f07538..6a9d89c93b1f 100644
--- a/drivers/dma/dma-jz4740.c
+++ b/drivers/dma/dma-jz4740.c
@@ -433,7 +433,7 @@ static struct dma_async_tx_descriptor *jz4740_dma_prep_slave_sg(
static struct dma_async_tx_descriptor *jz4740_dma_prep_dma_cyclic(
struct dma_chan *c, dma_addr_t buf_addr, size_t buf_len,
size_t period_len, enum dma_transfer_direction direction,
- unsigned long flags, void *context)
+ unsigned long flags)
{
struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
struct jz4740_dma_desc *desc;
@@ -614,4 +614,4 @@ module_platform_driver(jz4740_dma_driver);
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
MODULE_DESCRIPTION("JZ4740 DMA driver");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
index a27ded53ab4f..1af731b83b3f 100644
--- a/drivers/dma/dw/core.c
+++ b/drivers/dma/dw/core.c
@@ -279,6 +279,19 @@ static void dwc_dostart(struct dw_dma_chan *dwc, struct dw_desc *first)
channel_set_bit(dw, CH_EN, dwc->mask);
}
+static void dwc_dostart_first_queued(struct dw_dma_chan *dwc)
+{
+ struct dw_desc *desc;
+
+ if (list_empty(&dwc->queue))
+ return;
+
+ list_move(dwc->queue.next, &dwc->active_list);
+ desc = dwc_first_active(dwc);
+ dev_vdbg(chan2dev(&dwc->chan), "%s: started %u\n", __func__, desc->txd.cookie);
+ dwc_dostart(dwc, desc);
+}
+
/*----------------------------------------------------------------------*/
static void
@@ -335,10 +348,7 @@ static void dwc_complete_all(struct dw_dma *dw, struct dw_dma_chan *dwc)
* the completed ones.
*/
list_splice_init(&dwc->active_list, &list);
- if (!list_empty(&dwc->queue)) {
- list_move(dwc->queue.next, &dwc->active_list);
- dwc_dostart(dwc, dwc_first_active(dwc));
- }
+ dwc_dostart_first_queued(dwc);
spin_unlock_irqrestore(&dwc->lock, flags);
@@ -467,10 +477,7 @@ static void dwc_scan_descriptors(struct dw_dma *dw, struct dw_dma_chan *dwc)
/* Try to continue after resetting the channel... */
dwc_chan_disable(dw, dwc);
- if (!list_empty(&dwc->queue)) {
- list_move(dwc->queue.next, &dwc->active_list);
- dwc_dostart(dwc, dwc_first_active(dwc));
- }
+ dwc_dostart_first_queued(dwc);
spin_unlock_irqrestore(&dwc->lock, flags);
}
@@ -677,17 +684,9 @@ static dma_cookie_t dwc_tx_submit(struct dma_async_tx_descriptor *tx)
* possible, perhaps even appending to those already submitted
* for DMA. But this is hard to do in a race-free manner.
*/
- if (list_empty(&dwc->active_list)) {
- dev_vdbg(chan2dev(tx->chan), "%s: started %u\n", __func__,
- desc->txd.cookie);
- list_add_tail(&desc->desc_node, &dwc->active_list);
- dwc_dostart(dwc, dwc_first_active(dwc));
- } else {
- dev_vdbg(chan2dev(tx->chan), "%s: queued %u\n", __func__,
- desc->txd.cookie);
- list_add_tail(&desc->desc_node, &dwc->queue);
- }
+ dev_vdbg(chan2dev(tx->chan), "%s: queued %u\n", __func__, desc->txd.cookie);
+ list_add_tail(&desc->desc_node, &dwc->queue);
spin_unlock_irqrestore(&dwc->lock, flags);
@@ -1092,9 +1091,12 @@ dwc_tx_status(struct dma_chan *chan,
static void dwc_issue_pending(struct dma_chan *chan)
{
struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
+ unsigned long flags;
- if (!list_empty(&dwc->queue))
- dwc_scan_descriptors(to_dw_dma(chan->device), dwc);
+ spin_lock_irqsave(&dwc->lock, flags);
+ if (list_empty(&dwc->active_list))
+ dwc_dostart_first_queued(dwc);
+ spin_unlock_irqrestore(&dwc->lock, flags);
}
static int dwc_alloc_chan_resources(struct dma_chan *chan)
diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index b512caf46944..7b65633f495e 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -23,6 +23,7 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
+#include <linux/of.h>
#include <linux/platform_data/edma.h>
@@ -256,8 +257,13 @@ static int edma_terminate_all(struct edma_chan *echan)
* echan->edesc is NULL and exit.)
*/
if (echan->edesc) {
+ int cyclic = echan->edesc->cyclic;
echan->edesc = NULL;
edma_stop(echan->ch_num);
+ /* Move the cyclic channel back to default queue */
+ if (cyclic)
+ edma_assign_channel_eventq(echan->ch_num,
+ EVENTQ_DEFAULT);
}
vchan_get_all_descriptors(&echan->vchan, &head);
@@ -592,7 +598,7 @@ struct dma_async_tx_descriptor *edma_prep_dma_memcpy(
static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
size_t period_len, enum dma_transfer_direction direction,
- unsigned long tx_flags, void *context)
+ unsigned long tx_flags)
{
struct edma_chan *echan = to_edma_chan(chan);
struct device *dev = chan->device->dev;
@@ -718,12 +724,15 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
edesc->absync = ret;
/*
- * Enable interrupts for every period because callback
- * has to be called for every period.
+ * Enable period interrupt only if it is requested
*/
- edesc->pset[i].param.opt |= TCINTEN;
+ if (tx_flags & DMA_PREP_INTERRUPT)
+ edesc->pset[i].param.opt |= TCINTEN;
}
+ /* Place the cyclic channel to highest priority queue */
+ edma_assign_channel_eventq(echan->ch_num, EVENTQ_0);
+
return vchan_tx_prep(&echan->vchan, &edesc->vdesc, tx_flags);
}
@@ -993,7 +1002,7 @@ static int edma_dma_device_slave_caps(struct dma_chan *dchan,
caps->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
caps->cmd_pause = true;
caps->cmd_terminate = true;
- caps->residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
+ caps->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
return 0;
}
@@ -1040,7 +1049,7 @@ static int edma_probe(struct platform_device *pdev)
ecc->dummy_slot = edma_alloc_slot(ecc->ctlr, EDMA_SLOT_ANY);
if (ecc->dummy_slot < 0) {
dev_err(&pdev->dev, "Can't allocate PaRAM dummy slot\n");
- return -EIO;
+ return ecc->dummy_slot;
}
dma_cap_zero(ecc->dma_slave.cap_mask);
@@ -1125,7 +1134,7 @@ static int edma_init(void)
}
}
- if (EDMA_CTLRS == 2) {
+ if (!of_have_populated_dt() && EDMA_CTLRS == 2) {
pdev1 = platform_device_register_full(&edma_dev_info1);
if (IS_ERR(pdev1)) {
platform_driver_unregister(&edma_driver);
diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c
index cb4bf682a708..7650470196c4 100644
--- a/drivers/dma/ep93xx_dma.c
+++ b/drivers/dma/ep93xx_dma.c
@@ -1092,7 +1092,6 @@ fail:
* @period_len: length of a single period
* @dir: direction of the operation
* @flags: tx descriptor status flags
- * @context: operation context (ignored)
*
* Prepares a descriptor for cyclic DMA operation. This means that once the
* descriptor is submitted, we will be submitting in a @period_len sized
@@ -1105,8 +1104,7 @@ fail:
static struct dma_async_tx_descriptor *
ep93xx_dma_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr,
size_t buf_len, size_t period_len,
- enum dma_transfer_direction dir, unsigned long flags,
- void *context)
+ enum dma_transfer_direction dir, unsigned long flags)
{
struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan);
struct ep93xx_dma_desc *desc, *first;
diff --git a/drivers/dma/fsl-edma.c b/drivers/dma/fsl-edma.c
index b396a7fb53ab..3c5711d5fe97 100644
--- a/drivers/dma/fsl-edma.c
+++ b/drivers/dma/fsl-edma.c
@@ -248,11 +248,12 @@ static void fsl_edma_chan_mux(struct fsl_edma_chan *fsl_chan,
unsigned int slot, bool enable)
{
u32 ch = fsl_chan->vchan.chan.chan_id;
- void __iomem *muxaddr = fsl_chan->edma->muxbase[ch / DMAMUX_NR];
+ void __iomem *muxaddr;
unsigned chans_per_mux, ch_off;
chans_per_mux = fsl_chan->edma->n_chans / DMAMUX_NR;
ch_off = fsl_chan->vchan.chan.chan_id % chans_per_mux;
+ muxaddr = fsl_chan->edma->muxbase[ch / chans_per_mux];
if (enable)
edma_writeb(fsl_chan->edma,
@@ -516,7 +517,7 @@ err:
static struct dma_async_tx_descriptor *fsl_edma_prep_dma_cyclic(
struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len,
size_t period_len, enum dma_transfer_direction direction,
- unsigned long flags, void *context)
+ unsigned long flags)
{
struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
struct fsl_edma_desc *fsl_desc;
@@ -724,6 +725,7 @@ static struct dma_chan *fsl_edma_xlate(struct of_phandle_args *dma_spec,
{
struct fsl_edma_engine *fsl_edma = ofdma->of_dma_data;
struct dma_chan *chan, *_chan;
+ unsigned long chans_per_mux = fsl_edma->n_chans / DMAMUX_NR;
if (dma_spec->args_count != 2)
return NULL;
@@ -732,7 +734,7 @@ static struct dma_chan *fsl_edma_xlate(struct of_phandle_args *dma_spec,
list_for_each_entry_safe(chan, _chan, &fsl_edma->dma_dev.channels, device_node) {
if (chan->client_count)
continue;
- if ((chan->chan_id / DMAMUX_NR) == dma_spec->args[0]) {
+ if ((chan->chan_id / chans_per_mux) == dma_spec->args[0]) {
chan = dma_get_slave_channel(chan);
if (chan) {
chan->device->privatecnt++;
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index e0fec68aed25..d5d6885ab341 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -396,10 +396,17 @@ static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx)
struct fsldma_chan *chan = to_fsl_chan(tx->chan);
struct fsl_desc_sw *desc = tx_to_fsl_desc(tx);
struct fsl_desc_sw *child;
- unsigned long flags;
dma_cookie_t cookie = -EINVAL;
- spin_lock_irqsave(&chan->desc_lock, flags);
+ spin_lock_bh(&chan->desc_lock);
+
+#ifdef CONFIG_PM
+ if (unlikely(chan->pm_state != RUNNING)) {
+ chan_dbg(chan, "cannot submit due to suspend\n");
+ spin_unlock_bh(&chan->desc_lock);
+ return -1;
+ }
+#endif
/*
* assign cookies to all of the software descriptors
@@ -412,7 +419,7 @@ static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx)
/* put this transaction onto the tail of the pending queue */
append_ld_queue(chan, desc);
- spin_unlock_irqrestore(&chan->desc_lock, flags);
+ spin_unlock_bh(&chan->desc_lock);
return cookie;
}
@@ -459,6 +466,88 @@ static struct fsl_desc_sw *fsl_dma_alloc_descriptor(struct fsldma_chan *chan)
}
/**
+ * fsldma_clean_completed_descriptor - free all descriptors which
+ * has been completed and acked
+ * @chan: Freescale DMA channel
+ *
+ * This function is used on all completed and acked descriptors.
+ * All descriptors should only be freed in this function.
+ */
+static void fsldma_clean_completed_descriptor(struct fsldma_chan *chan)
+{
+ struct fsl_desc_sw *desc, *_desc;
+
+ /* Run the callback for each descriptor, in order */
+ list_for_each_entry_safe(desc, _desc, &chan->ld_completed, node)
+ if (async_tx_test_ack(&desc->async_tx))
+ fsl_dma_free_descriptor(chan, desc);
+}
+
+/**
+ * fsldma_run_tx_complete_actions - cleanup a single link descriptor
+ * @chan: Freescale DMA channel
+ * @desc: descriptor to cleanup and free
+ * @cookie: Freescale DMA transaction identifier
+ *
+ * This function is used on a descriptor which has been executed by the DMA
+ * controller. It will run any callbacks, submit any dependencies.
+ */
+static dma_cookie_t fsldma_run_tx_complete_actions(struct fsldma_chan *chan,
+ struct fsl_desc_sw *desc, dma_cookie_t cookie)
+{
+ struct dma_async_tx_descriptor *txd = &desc->async_tx;
+ dma_cookie_t ret = cookie;
+
+ BUG_ON(txd->cookie < 0);
+
+ if (txd->cookie > 0) {
+ ret = txd->cookie;
+
+ /* Run the link descriptor callback function */
+ if (txd->callback) {
+ chan_dbg(chan, "LD %p callback\n", desc);
+ txd->callback(txd->callback_param);
+ }
+ }
+
+ /* Run any dependencies */
+ dma_run_dependencies(txd);
+
+ return ret;
+}
+
+/**
+ * fsldma_clean_running_descriptor - move the completed descriptor from
+ * ld_running to ld_completed
+ * @chan: Freescale DMA channel
+ * @desc: the descriptor which is completed
+ *
+ * Free the descriptor directly if acked by async_tx api, or move it to
+ * queue ld_completed.
+ */
+static void fsldma_clean_running_descriptor(struct fsldma_chan *chan,
+ struct fsl_desc_sw *desc)
+{
+ /* Remove from the list of transactions */
+ list_del(&desc->node);
+
+ /*
+ * the client is allowed to attach dependent operations
+ * until 'ack' is set
+ */
+ if (!async_tx_test_ack(&desc->async_tx)) {
+ /*
+ * Move this descriptor to the list of descriptors which is
+ * completed, but still awaiting the 'ack' bit to be set.
+ */
+ list_add_tail(&desc->node, &chan->ld_completed);
+ return;
+ }
+
+ dma_pool_free(chan->desc_pool, desc, desc->async_tx.phys);
+}
+
+/**
* fsl_chan_xfer_ld_queue - transfer any pending transactions
* @chan : Freescale DMA channel
*
@@ -526,31 +615,58 @@ static void fsl_chan_xfer_ld_queue(struct fsldma_chan *chan)
}
/**
- * fsldma_cleanup_descriptor - cleanup and free a single link descriptor
+ * fsldma_cleanup_descriptors - cleanup link descriptors which are completed
+ * and move them to ld_completed to free until flag 'ack' is set
* @chan: Freescale DMA channel
- * @desc: descriptor to cleanup and free
*
- * This function is used on a descriptor which has been executed by the DMA
- * controller. It will run any callbacks, submit any dependencies, and then
- * free the descriptor.
+ * This function is used on descriptors which have been executed by the DMA
+ * controller. It will run any callbacks, submit any dependencies, then
+ * free these descriptors if flag 'ack' is set.
*/
-static void fsldma_cleanup_descriptor(struct fsldma_chan *chan,
- struct fsl_desc_sw *desc)
+static void fsldma_cleanup_descriptors(struct fsldma_chan *chan)
{
- struct dma_async_tx_descriptor *txd = &desc->async_tx;
+ struct fsl_desc_sw *desc, *_desc;
+ dma_cookie_t cookie = 0;
+ dma_addr_t curr_phys = get_cdar(chan);
+ int seen_current = 0;
+
+ fsldma_clean_completed_descriptor(chan);
+
+ /* Run the callback for each descriptor, in order */
+ list_for_each_entry_safe(desc, _desc, &chan->ld_running, node) {
+ /*
+ * do not advance past the current descriptor loaded into the
+ * hardware channel, subsequent descriptors are either in
+ * process or have not been submitted
+ */
+ if (seen_current)
+ break;
+
+ /*
+ * stop the search if we reach the current descriptor and the
+ * channel is busy
+ */
+ if (desc->async_tx.phys == curr_phys) {
+ seen_current = 1;
+ if (!dma_is_idle(chan))
+ break;
+ }
+
+ cookie = fsldma_run_tx_complete_actions(chan, desc, cookie);
- /* Run the link descriptor callback function */
- if (txd->callback) {
- chan_dbg(chan, "LD %p callback\n", desc);
- txd->callback(txd->callback_param);
+ fsldma_clean_running_descriptor(chan, desc);
}
- /* Run any dependencies */
- dma_run_dependencies(txd);
+ /*
+ * Start any pending transactions automatically
+ *
+ * In the ideal case, we keep the DMA controller busy while we go
+ * ahead and free the descriptors below.
+ */
+ fsl_chan_xfer_ld_queue(chan);
- dma_descriptor_unmap(txd);
- chan_dbg(chan, "LD %p free\n", desc);
- dma_pool_free(chan->desc_pool, desc, txd->phys);
+ if (cookie > 0)
+ chan->common.completed_cookie = cookie;
}
/**
@@ -617,13 +733,14 @@ static void fsldma_free_desc_list_reverse(struct fsldma_chan *chan,
static void fsl_dma_free_chan_resources(struct dma_chan *dchan)
{
struct fsldma_chan *chan = to_fsl_chan(dchan);
- unsigned long flags;
chan_dbg(chan, "free all channel resources\n");
- spin_lock_irqsave(&chan->desc_lock, flags);
+ spin_lock_bh(&chan->desc_lock);
+ fsldma_cleanup_descriptors(chan);
fsldma_free_desc_list(chan, &chan->ld_pending);
fsldma_free_desc_list(chan, &chan->ld_running);
- spin_unlock_irqrestore(&chan->desc_lock, flags);
+ fsldma_free_desc_list(chan, &chan->ld_completed);
+ spin_unlock_bh(&chan->desc_lock);
dma_pool_destroy(chan->desc_pool);
chan->desc_pool = NULL;
@@ -842,7 +959,6 @@ static int fsl_dma_device_control(struct dma_chan *dchan,
{
struct dma_slave_config *config;
struct fsldma_chan *chan;
- unsigned long flags;
int size;
if (!dchan)
@@ -852,7 +968,7 @@ static int fsl_dma_device_control(struct dma_chan *dchan,
switch (cmd) {
case DMA_TERMINATE_ALL:
- spin_lock_irqsave(&chan->desc_lock, flags);
+ spin_lock_bh(&chan->desc_lock);
/* Halt the DMA engine */
dma_halt(chan);
@@ -860,9 +976,10 @@ static int fsl_dma_device_control(struct dma_chan *dchan,
/* Remove and free all of the descriptors in the LD queue */
fsldma_free_desc_list(chan, &chan->ld_pending);
fsldma_free_desc_list(chan, &chan->ld_running);
+ fsldma_free_desc_list(chan, &chan->ld_completed);
chan->idle = true;
- spin_unlock_irqrestore(&chan->desc_lock, flags);
+ spin_unlock_bh(&chan->desc_lock);
return 0;
case DMA_SLAVE_CONFIG:
@@ -904,11 +1021,10 @@ static int fsl_dma_device_control(struct dma_chan *dchan,
static void fsl_dma_memcpy_issue_pending(struct dma_chan *dchan)
{
struct fsldma_chan *chan = to_fsl_chan(dchan);
- unsigned long flags;
- spin_lock_irqsave(&chan->desc_lock, flags);
+ spin_lock_bh(&chan->desc_lock);
fsl_chan_xfer_ld_queue(chan);
- spin_unlock_irqrestore(&chan->desc_lock, flags);
+ spin_unlock_bh(&chan->desc_lock);
}
/**
@@ -919,6 +1035,17 @@ static enum dma_status fsl_tx_status(struct dma_chan *dchan,
dma_cookie_t cookie,
struct dma_tx_state *txstate)
{
+ struct fsldma_chan *chan = to_fsl_chan(dchan);
+ enum dma_status ret;
+
+ ret = dma_cookie_status(dchan, cookie, txstate);
+ if (ret == DMA_COMPLETE)
+ return ret;
+
+ spin_lock_bh(&chan->desc_lock);
+ fsldma_cleanup_descriptors(chan);
+ spin_unlock_bh(&chan->desc_lock);
+
return dma_cookie_status(dchan, cookie, txstate);
}
@@ -996,52 +1123,18 @@ static irqreturn_t fsldma_chan_irq(int irq, void *data)
static void dma_do_tasklet(unsigned long data)
{
struct fsldma_chan *chan = (struct fsldma_chan *)data;
- struct fsl_desc_sw *desc, *_desc;
- LIST_HEAD(ld_cleanup);
- unsigned long flags;
chan_dbg(chan, "tasklet entry\n");
- spin_lock_irqsave(&chan->desc_lock, flags);
-
- /* update the cookie if we have some descriptors to cleanup */
- if (!list_empty(&chan->ld_running)) {
- dma_cookie_t cookie;
-
- desc = to_fsl_desc(chan->ld_running.prev);
- cookie = desc->async_tx.cookie;
- dma_cookie_complete(&desc->async_tx);
-
- chan_dbg(chan, "completed_cookie=%d\n", cookie);
- }
-
- /*
- * move the descriptors to a temporary list so we can drop the lock
- * during the entire cleanup operation
- */
- list_splice_tail_init(&chan->ld_running, &ld_cleanup);
+ spin_lock_bh(&chan->desc_lock);
/* the hardware is now idle and ready for more */
chan->idle = true;
- /*
- * Start any pending transactions automatically
- *
- * In the ideal case, we keep the DMA controller busy while we go
- * ahead and free the descriptors below.
- */
- fsl_chan_xfer_ld_queue(chan);
- spin_unlock_irqrestore(&chan->desc_lock, flags);
-
- /* Run the callback for each descriptor, in order */
- list_for_each_entry_safe(desc, _desc, &ld_cleanup, node) {
-
- /* Remove from the list of transactions */
- list_del(&desc->node);
+ /* Run all cleanup for descriptors which have been completed */
+ fsldma_cleanup_descriptors(chan);
- /* Run all cleanup for this descriptor */
- fsldma_cleanup_descriptor(chan, desc);
- }
+ spin_unlock_bh(&chan->desc_lock);
chan_dbg(chan, "tasklet exit\n");
}
@@ -1225,7 +1318,11 @@ static int fsl_dma_chan_probe(struct fsldma_device *fdev,
spin_lock_init(&chan->desc_lock);
INIT_LIST_HEAD(&chan->ld_pending);
INIT_LIST_HEAD(&chan->ld_running);
+ INIT_LIST_HEAD(&chan->ld_completed);
chan->idle = true;
+#ifdef CONFIG_PM
+ chan->pm_state = RUNNING;
+#endif
chan->common.device = &fdev->common;
dma_cookie_init(&chan->common);
@@ -1365,6 +1462,69 @@ static int fsldma_of_remove(struct platform_device *op)
return 0;
}
+#ifdef CONFIG_PM
+static int fsldma_suspend_late(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct fsldma_device *fdev = platform_get_drvdata(pdev);
+ struct fsldma_chan *chan;
+ int i;
+
+ for (i = 0; i < FSL_DMA_MAX_CHANS_PER_DEVICE; i++) {
+ chan = fdev->chan[i];
+ if (!chan)
+ continue;
+
+ spin_lock_bh(&chan->desc_lock);
+ if (unlikely(!chan->idle))
+ goto out;
+ chan->regs_save.mr = get_mr(chan);
+ chan->pm_state = SUSPENDED;
+ spin_unlock_bh(&chan->desc_lock);
+ }
+ return 0;
+
+out:
+ for (; i >= 0; i--) {
+ chan = fdev->chan[i];
+ if (!chan)
+ continue;
+ chan->pm_state = RUNNING;
+ spin_unlock_bh(&chan->desc_lock);
+ }
+ return -EBUSY;
+}
+
+static int fsldma_resume_early(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct fsldma_device *fdev = platform_get_drvdata(pdev);
+ struct fsldma_chan *chan;
+ u32 mode;
+ int i;
+
+ for (i = 0; i < FSL_DMA_MAX_CHANS_PER_DEVICE; i++) {
+ chan = fdev->chan[i];
+ if (!chan)
+ continue;
+
+ spin_lock_bh(&chan->desc_lock);
+ mode = chan->regs_save.mr
+ & ~FSL_DMA_MR_CS & ~FSL_DMA_MR_CC & ~FSL_DMA_MR_CA;
+ set_mr(chan, mode);
+ chan->pm_state = RUNNING;
+ spin_unlock_bh(&chan->desc_lock);
+ }
+
+ return 0;
+}
+
+static const struct dev_pm_ops fsldma_pm_ops = {
+ .suspend_late = fsldma_suspend_late,
+ .resume_early = fsldma_resume_early,
+};
+#endif
+
static const struct of_device_id fsldma_of_ids[] = {
{ .compatible = "fsl,elo3-dma", },
{ .compatible = "fsl,eloplus-dma", },
@@ -1377,6 +1537,9 @@ static struct platform_driver fsldma_of_driver = {
.name = "fsl-elo-dma",
.owner = THIS_MODULE,
.of_match_table = fsldma_of_ids,
+#ifdef CONFIG_PM
+ .pm = &fsldma_pm_ops,
+#endif
},
.probe = fsldma_of_probe,
.remove = fsldma_of_remove,
diff --git a/drivers/dma/fsldma.h b/drivers/dma/fsldma.h
index d56e83599825..239c20c84382 100644
--- a/drivers/dma/fsldma.h
+++ b/drivers/dma/fsldma.h
@@ -134,12 +134,36 @@ struct fsldma_device {
#define FSL_DMA_CHAN_PAUSE_EXT 0x00001000
#define FSL_DMA_CHAN_START_EXT 0x00002000
+#ifdef CONFIG_PM
+struct fsldma_chan_regs_save {
+ u32 mr;
+};
+
+enum fsldma_pm_state {
+ RUNNING = 0,
+ SUSPENDED,
+};
+#endif
+
struct fsldma_chan {
char name[8]; /* Channel name */
struct fsldma_chan_regs __iomem *regs;
spinlock_t desc_lock; /* Descriptor operation lock */
- struct list_head ld_pending; /* Link descriptors queue */
- struct list_head ld_running; /* Link descriptors queue */
+ /*
+ * Descriptors which are queued to run, but have not yet been
+ * submitted to the hardware for execution
+ */
+ struct list_head ld_pending;
+ /*
+ * Descriptors which are currently being executed by the hardware
+ */
+ struct list_head ld_running;
+ /*
+ * Descriptors which have finished execution by the hardware. These
+ * descriptors have already had their cleanup actions run. They are
+ * waiting for the ACK bit to be set by the async_tx API.
+ */
+ struct list_head ld_completed; /* Link descriptors queue */
struct dma_chan common; /* DMA common channel */
struct dma_pool *desc_pool; /* Descriptors pool */
struct device *dev; /* Channel device */
@@ -148,6 +172,10 @@ struct fsldma_chan {
struct tasklet_struct tasklet;
u32 feature;
bool idle; /* DMA controller is idle */
+#ifdef CONFIG_PM
+ struct fsldma_chan_regs_save regs_save;
+ enum fsldma_pm_state pm_state;
+#endif
void (*toggle_ext_pause)(struct fsldma_chan *fsl_chan, int enable);
void (*toggle_ext_start)(struct fsldma_chan *fsl_chan, int enable);
diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c
index 286660a12cc6..9d2c9e7374dc 100644
--- a/drivers/dma/imx-dma.c
+++ b/drivers/dma/imx-dma.c
@@ -866,7 +866,7 @@ static struct dma_async_tx_descriptor *imxdma_prep_slave_sg(
static struct dma_async_tx_descriptor *imxdma_prep_dma_cyclic(
struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len,
size_t period_len, enum dma_transfer_direction direction,
- unsigned long flags, void *context)
+ unsigned long flags)
{
struct imxdma_channel *imxdmac = to_imxdma_chan(chan);
struct imxdma_engine *imxdma = imxdmac->imxdma;
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 14867e3ac8ff..f7626e37d0b8 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -271,6 +271,7 @@ struct sdma_channel {
unsigned int chn_count;
unsigned int chn_real_count;
struct tasklet_struct tasklet;
+ struct imx_dma_data data;
};
#define IMX_DMA_SG_LOOP BIT(0)
@@ -749,6 +750,11 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
emi_2_per = sdma->script_addrs->asrc_2_mcu_addr;
per_2_per = sdma->script_addrs->per_2_per_addr;
break;
+ case IMX_DMATYPE_ASRC_SP:
+ per_2_emi = sdma->script_addrs->shp_2_mcu_addr;
+ emi_2_per = sdma->script_addrs->mcu_2_shp_addr;
+ per_2_per = sdma->script_addrs->per_2_per_addr;
+ break;
case IMX_DMATYPE_MSHC:
per_2_emi = sdma->script_addrs->mshc_2_mcu_addr;
emi_2_per = sdma->script_addrs->mcu_2_mshc_addr;
@@ -911,14 +917,13 @@ static int sdma_request_channel(struct sdma_channel *sdmac)
int channel = sdmac->channel;
int ret = -EBUSY;
- sdmac->bd = dma_alloc_coherent(NULL, PAGE_SIZE, &sdmac->bd_phys, GFP_KERNEL);
+ sdmac->bd = dma_zalloc_coherent(NULL, PAGE_SIZE, &sdmac->bd_phys,
+ GFP_KERNEL);
if (!sdmac->bd) {
ret = -ENOMEM;
goto out;
}
- memset(sdmac->bd, 0, PAGE_SIZE);
-
sdma->channel_control[channel].base_bd_ptr = sdmac->bd_phys;
sdma->channel_control[channel].current_bd_ptr = sdmac->bd_phys;
@@ -1120,7 +1125,7 @@ err_out:
static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic(
struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len,
size_t period_len, enum dma_transfer_direction direction,
- unsigned long flags, void *context)
+ unsigned long flags)
{
struct sdma_channel *sdmac = to_sdma_chan(chan);
struct sdma_engine *sdma = sdmac->sdma;
@@ -1414,12 +1419,14 @@ err_dma_alloc:
static bool sdma_filter_fn(struct dma_chan *chan, void *fn_param)
{
+ struct sdma_channel *sdmac = to_sdma_chan(chan);
struct imx_dma_data *data = fn_param;
if (!imx_dma_is_general_purpose(chan))
return false;
- chan->private = data;
+ sdmac->data = *data;
+ chan->private = &sdmac->data;
return true;
}
diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
index 128ca143486d..bbf62927bd72 100644
--- a/drivers/dma/ipu/ipu_idmac.c
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -1532,11 +1532,17 @@ static int idmac_alloc_chan_resources(struct dma_chan *chan)
#ifdef DEBUG
if (chan->chan_id == IDMAC_IC_7) {
ic_sof = ipu_irq_map(69);
- if (ic_sof > 0)
- request_irq(ic_sof, ic_sof_irq, 0, "IC SOF", ichan);
+ if (ic_sof > 0) {
+ ret = request_irq(ic_sof, ic_sof_irq, 0, "IC SOF", ichan);
+ if (ret)
+ dev_err(&chan->dev->device, "request irq failed for IC SOF");
+ }
ic_eof = ipu_irq_map(70);
- if (ic_eof > 0)
- request_irq(ic_eof, ic_eof_irq, 0, "IC EOF", ichan);
+ if (ic_eof > 0) {
+ ret = request_irq(ic_eof, ic_eof_irq, 0, "IC EOF", ichan);
+ if (ret)
+ dev_err(&chan->dev->device, "request irq failed for IC EOF");
+ }
}
#endif
diff --git a/drivers/dma/mmp_pdma.c b/drivers/dma/mmp_pdma.c
index a7b186d536b3..a1a4db5721b8 100644
--- a/drivers/dma/mmp_pdma.c
+++ b/drivers/dma/mmp_pdma.c
@@ -601,7 +601,7 @@ static struct dma_async_tx_descriptor *
mmp_pdma_prep_dma_cyclic(struct dma_chan *dchan,
dma_addr_t buf_addr, size_t len, size_t period_len,
enum dma_transfer_direction direction,
- unsigned long flags, void *context)
+ unsigned long flags)
{
struct mmp_pdma_chan *chan;
struct mmp_pdma_desc_sw *first = NULL, *prev = NULL, *new;
diff --git a/drivers/dma/mmp_tdma.c b/drivers/dma/mmp_tdma.c
index 724f7f4c9720..6ad30e2c5038 100644
--- a/drivers/dma/mmp_tdma.c
+++ b/drivers/dma/mmp_tdma.c
@@ -389,7 +389,7 @@ struct mmp_tdma_desc *mmp_tdma_alloc_descriptor(struct mmp_tdma_chan *tdmac)
static struct dma_async_tx_descriptor *mmp_tdma_prep_dma_cyclic(
struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len,
size_t period_len, enum dma_transfer_direction direction,
- unsigned long flags, void *context)
+ unsigned long flags)
{
struct mmp_tdma_chan *tdmac = to_mmp_tdma_chan(chan);
struct mmp_tdma_desc *desc;
diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c
index 2ad43738ac8b..881db2bcb48b 100644
--- a/drivers/dma/mpc512x_dma.c
+++ b/drivers/dma/mpc512x_dma.c
@@ -53,6 +53,7 @@
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
+#include <linux/of_dma.h>
#include <linux/of_platform.h>
#include <linux/random.h>
@@ -1036,7 +1037,15 @@ static int mpc_dma_probe(struct platform_device *op)
if (retval)
goto err_free2;
- return retval;
+ /* Register with OF helpers for DMA lookups (nonfatal) */
+ if (dev->of_node) {
+ retval = of_dma_controller_register(dev->of_node,
+ of_dma_xlate_by_chan_id, mdma);
+ if (retval)
+ dev_warn(dev, "Could not register for OF lookup\n");
+ }
+
+ return 0;
err_free2:
if (mdma->is_mpc8308)
@@ -1057,6 +1066,8 @@ static int mpc_dma_remove(struct platform_device *op)
struct device *dev = &op->dev;
struct mpc_dma *mdma = dev_get_drvdata(dev);
+ if (dev->of_node)
+ of_dma_controller_free(dev->of_node);
dma_async_device_unregister(&mdma->dma);
if (mdma->is_mpc8308) {
free_irq(mdma->irq2, mdma);
diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
index ead491346da7..5ea61201dbf0 100644
--- a/drivers/dma/mxs-dma.c
+++ b/drivers/dma/mxs-dma.c
@@ -413,16 +413,14 @@ static int mxs_dma_alloc_chan_resources(struct dma_chan *chan)
struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
int ret;
- mxs_chan->ccw = dma_alloc_coherent(mxs_dma->dma_device.dev,
- CCW_BLOCK_SIZE, &mxs_chan->ccw_phys,
- GFP_KERNEL);
+ mxs_chan->ccw = dma_zalloc_coherent(mxs_dma->dma_device.dev,
+ CCW_BLOCK_SIZE,
+ &mxs_chan->ccw_phys, GFP_KERNEL);
if (!mxs_chan->ccw) {
ret = -ENOMEM;
goto err_alloc;
}
- memset(mxs_chan->ccw, 0, CCW_BLOCK_SIZE);
-
if (mxs_chan->chan_irq != NO_IRQ) {
ret = request_irq(mxs_chan->chan_irq, mxs_dma_int_handler,
0, "mxs-dma", mxs_dma);
@@ -591,7 +589,7 @@ err_out:
static struct dma_async_tx_descriptor *mxs_dma_prep_dma_cyclic(
struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len,
size_t period_len, enum dma_transfer_direction direction,
- unsigned long flags, void *context)
+ unsigned long flags)
{
struct mxs_dma_chan *mxs_chan = to_mxs_dma_chan(chan);
struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
diff --git a/drivers/dma/nbpfaxi.c b/drivers/dma/nbpfaxi.c
new file mode 100644
index 000000000000..5aeada56a442
--- /dev/null
+++ b/drivers/dma/nbpfaxi.c
@@ -0,0 +1,1517 @@
+/*
+ * Copyright (C) 2013-2014 Renesas Electronics Europe Ltd.
+ * Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_dma.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/dma/nbpfaxi.h>
+
+#include "dmaengine.h"
+
+#define NBPF_REG_CHAN_OFFSET 0
+#define NBPF_REG_CHAN_SIZE 0x40
+
+/* Channel Current Transaction Byte register */
+#define NBPF_CHAN_CUR_TR_BYTE 0x20
+
+/* Channel Status register */
+#define NBPF_CHAN_STAT 0x24
+#define NBPF_CHAN_STAT_EN 1
+#define NBPF_CHAN_STAT_TACT 4
+#define NBPF_CHAN_STAT_ERR 0x10
+#define NBPF_CHAN_STAT_END 0x20
+#define NBPF_CHAN_STAT_TC 0x40
+#define NBPF_CHAN_STAT_DER 0x400
+
+/* Channel Control register */
+#define NBPF_CHAN_CTRL 0x28
+#define NBPF_CHAN_CTRL_SETEN 1
+#define NBPF_CHAN_CTRL_CLREN 2
+#define NBPF_CHAN_CTRL_STG 4
+#define NBPF_CHAN_CTRL_SWRST 8
+#define NBPF_CHAN_CTRL_CLRRQ 0x10
+#define NBPF_CHAN_CTRL_CLREND 0x20
+#define NBPF_CHAN_CTRL_CLRTC 0x40
+#define NBPF_CHAN_CTRL_SETSUS 0x100
+#define NBPF_CHAN_CTRL_CLRSUS 0x200
+
+/* Channel Configuration register */
+#define NBPF_CHAN_CFG 0x2c
+#define NBPF_CHAN_CFG_SEL 7 /* terminal SELect: 0..7 */
+#define NBPF_CHAN_CFG_REQD 8 /* REQuest Direction: DMAREQ is 0: input, 1: output */
+#define NBPF_CHAN_CFG_LOEN 0x10 /* LOw ENable: low DMA request line is: 0: inactive, 1: active */
+#define NBPF_CHAN_CFG_HIEN 0x20 /* HIgh ENable: high DMA request line is: 0: inactive, 1: active */
+#define NBPF_CHAN_CFG_LVL 0x40 /* LeVeL: DMA request line is sensed as 0: edge, 1: level */
+#define NBPF_CHAN_CFG_AM 0x700 /* ACK Mode: 0: Pulse mode, 1: Level mode, b'1x: Bus Cycle */
+#define NBPF_CHAN_CFG_SDS 0xf000 /* Source Data Size: 0: 8 bits,... , 7: 1024 bits */
+#define NBPF_CHAN_CFG_DDS 0xf0000 /* Destination Data Size: as above */
+#define NBPF_CHAN_CFG_SAD 0x100000 /* Source ADdress counting: 0: increment, 1: fixed */
+#define NBPF_CHAN_CFG_DAD 0x200000 /* Destination ADdress counting: 0: increment, 1: fixed */
+#define NBPF_CHAN_CFG_TM 0x400000 /* Transfer Mode: 0: single, 1: block TM */
+#define NBPF_CHAN_CFG_DEM 0x1000000 /* DMAEND interrupt Mask */
+#define NBPF_CHAN_CFG_TCM 0x2000000 /* DMATCO interrupt Mask */
+#define NBPF_CHAN_CFG_SBE 0x8000000 /* Sweep Buffer Enable */
+#define NBPF_CHAN_CFG_RSEL 0x10000000 /* RM: Register Set sELect */
+#define NBPF_CHAN_CFG_RSW 0x20000000 /* RM: Register Select sWitch */
+#define NBPF_CHAN_CFG_REN 0x40000000 /* RM: Register Set Enable */
+#define NBPF_CHAN_CFG_DMS 0x80000000 /* 0: register mode (RM), 1: link mode (LM) */
+
+#define NBPF_CHAN_NXLA 0x38
+#define NBPF_CHAN_CRLA 0x3c
+
+/* Link Header field */
+#define NBPF_HEADER_LV 1
+#define NBPF_HEADER_LE 2
+#define NBPF_HEADER_WBD 4
+#define NBPF_HEADER_DIM 8
+
+#define NBPF_CTRL 0x300
+#define NBPF_CTRL_PR 1 /* 0: fixed priority, 1: round robin */
+#define NBPF_CTRL_LVINT 2 /* DMAEND and DMAERR signalling: 0: pulse, 1: level */
+
+#define NBPF_DSTAT_ER 0x314
+#define NBPF_DSTAT_END 0x318
+
+#define NBPF_DMA_BUSWIDTHS \
+ (BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) | \
+ BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \
+ BIT(DMA_SLAVE_BUSWIDTH_8_BYTES))
+
+struct nbpf_config {
+ int num_channels;
+ int buffer_size;
+};
+
+/*
+ * We've got 3 types of objects, used to describe DMA transfers:
+ * 1. high-level descriptor, containing a struct dma_async_tx_descriptor object
+ * in it, used to communicate with the user
+ * 2. hardware DMA link descriptors, that we pass to DMAC for DMA transfer
+ * queuing, these must be DMAable, using either the streaming DMA API or
+ * allocated from coherent memory - one per SG segment
+ * 3. one per SG segment descriptors, used to manage HW link descriptors from
+ * (2). They do not have to be DMAable. They can either be (a) allocated
+ * together with link descriptors as mixed (DMA / CPU) objects, or (b)
+ * separately. Even if allocated separately it would be best to link them
+ * to link descriptors once during channel resource allocation and always
+ * use them as a single object.
+ * Therefore for both cases (a) and (b) at run-time objects (2) and (3) shall be
+ * treated as a single SG segment descriptor.
+ */
+
+struct nbpf_link_reg {
+ u32 header;
+ u32 src_addr;
+ u32 dst_addr;
+ u32 transaction_size;
+ u32 config;
+ u32 interval;
+ u32 extension;
+ u32 next;
+} __packed;
+
+struct nbpf_device;
+struct nbpf_channel;
+struct nbpf_desc;
+
+struct nbpf_link_desc {
+ struct nbpf_link_reg *hwdesc;
+ dma_addr_t hwdesc_dma_addr;
+ struct nbpf_desc *desc;
+ struct list_head node;
+};
+
+/**
+ * struct nbpf_desc - DMA transfer descriptor
+ * @async_tx: dmaengine object
+ * @user_wait: waiting for a user ack
+ * @length: total transfer length
+ * @sg: list of hardware descriptors, represented by struct nbpf_link_desc
+ * @node: member in channel descriptor lists
+ */
+struct nbpf_desc {
+ struct dma_async_tx_descriptor async_tx;
+ bool user_wait;
+ size_t length;
+ struct nbpf_channel *chan;
+ struct list_head sg;
+ struct list_head node;
+};
+
+/* Take a wild guess: allocate 4 segments per descriptor */
+#define NBPF_SEGMENTS_PER_DESC 4
+#define NBPF_DESCS_PER_PAGE ((PAGE_SIZE - sizeof(struct list_head)) / \
+ (sizeof(struct nbpf_desc) + \
+ NBPF_SEGMENTS_PER_DESC * \
+ (sizeof(struct nbpf_link_desc) + sizeof(struct nbpf_link_reg))))
+#define NBPF_SEGMENTS_PER_PAGE (NBPF_SEGMENTS_PER_DESC * NBPF_DESCS_PER_PAGE)
+
+struct nbpf_desc_page {
+ struct list_head node;
+ struct nbpf_desc desc[NBPF_DESCS_PER_PAGE];
+ struct nbpf_link_desc ldesc[NBPF_SEGMENTS_PER_PAGE];
+ struct nbpf_link_reg hwdesc[NBPF_SEGMENTS_PER_PAGE];
+};
+
+/**
+ * struct nbpf_channel - one DMAC channel
+ * @dma_chan: standard dmaengine channel object
+ * @base: register address base
+ * @nbpf: DMAC
+ * @name: IRQ name
+ * @irq: IRQ number
+ * @slave_addr: address for slave DMA
+ * @slave_width:slave data size in bytes
+ * @slave_burst:maximum slave burst size in bytes
+ * @terminal: DMA terminal, assigned to this channel
+ * @dmarq_cfg: DMA request line configuration - high / low, edge / level for NBPF_CHAN_CFG
+ * @flags: configuration flags from DT
+ * @lock: protect descriptor lists
+ * @free_links: list of free link descriptors
+ * @free: list of free descriptors
+ * @queued: list of queued descriptors
+ * @active: list of descriptors, scheduled for processing
+ * @done: list of completed descriptors, waiting post-processing
+ * @desc_page: list of additionally allocated descriptor pages - if any
+ */
+struct nbpf_channel {
+ struct dma_chan dma_chan;
+ struct tasklet_struct tasklet;
+ void __iomem *base;
+ struct nbpf_device *nbpf;
+ char name[16];
+ int irq;
+ dma_addr_t slave_src_addr;
+ size_t slave_src_width;
+ size_t slave_src_burst;
+ dma_addr_t slave_dst_addr;
+ size_t slave_dst_width;
+ size_t slave_dst_burst;
+ unsigned int terminal;
+ u32 dmarq_cfg;
+ unsigned long flags;
+ spinlock_t lock;
+ struct list_head free_links;
+ struct list_head free;
+ struct list_head queued;
+ struct list_head active;
+ struct list_head done;
+ struct list_head desc_page;
+ struct nbpf_desc *running;
+ bool paused;
+};
+
+struct nbpf_device {
+ struct dma_device dma_dev;
+ void __iomem *base;
+ struct clk *clk;
+ const struct nbpf_config *config;
+ struct nbpf_channel chan[];
+};
+
+enum nbpf_model {
+ NBPF1B4,
+ NBPF1B8,
+ NBPF1B16,
+ NBPF4B4,
+ NBPF4B8,
+ NBPF4B16,
+ NBPF8B4,
+ NBPF8B8,
+ NBPF8B16,
+};
+
+static struct nbpf_config nbpf_cfg[] = {
+ [NBPF1B4] = {
+ .num_channels = 1,
+ .buffer_size = 4,
+ },
+ [NBPF1B8] = {
+ .num_channels = 1,
+ .buffer_size = 8,
+ },
+ [NBPF1B16] = {
+ .num_channels = 1,
+ .buffer_size = 16,
+ },
+ [NBPF4B4] = {
+ .num_channels = 4,
+ .buffer_size = 4,
+ },
+ [NBPF4B8] = {
+ .num_channels = 4,
+ .buffer_size = 8,
+ },
+ [NBPF4B16] = {
+ .num_channels = 4,
+ .buffer_size = 16,
+ },
+ [NBPF8B4] = {
+ .num_channels = 8,
+ .buffer_size = 4,
+ },
+ [NBPF8B8] = {
+ .num_channels = 8,
+ .buffer_size = 8,
+ },
+ [NBPF8B16] = {
+ .num_channels = 8,
+ .buffer_size = 16,
+ },
+};
+
+#define nbpf_to_chan(d) container_of(d, struct nbpf_channel, dma_chan)
+
+/*
+ * dmaengine drivers seem to have a lot in common and instead of sharing more
+ * code, they reimplement those common algorithms independently. In this driver
+ * we try to separate the hardware-specific part from the (largely) generic
+ * part. This improves code readability and makes it possible in the future to
+ * reuse the generic code in form of a helper library. That generic code should
+ * be suitable for various DMA controllers, using transfer descriptors in RAM
+ * and pushing one SG list at a time to the DMA controller.
+ */
+
+/* Hardware-specific part */
+
+static inline u32 nbpf_chan_read(struct nbpf_channel *chan,
+ unsigned int offset)
+{
+ u32 data = ioread32(chan->base + offset);
+ dev_dbg(chan->dma_chan.device->dev, "%s(0x%p + 0x%x) = 0x%x\n",
+ __func__, chan->base, offset, data);
+ return data;
+}
+
+static inline void nbpf_chan_write(struct nbpf_channel *chan,
+ unsigned int offset, u32 data)
+{
+ iowrite32(data, chan->base + offset);
+ dev_dbg(chan->dma_chan.device->dev, "%s(0x%p + 0x%x) = 0x%x\n",
+ __func__, chan->base, offset, data);
+}
+
+static inline u32 nbpf_read(struct nbpf_device *nbpf,
+ unsigned int offset)
+{
+ u32 data = ioread32(nbpf->base + offset);
+ dev_dbg(nbpf->dma_dev.dev, "%s(0x%p + 0x%x) = 0x%x\n",
+ __func__, nbpf->base, offset, data);
+ return data;
+}
+
+static inline void nbpf_write(struct nbpf_device *nbpf,
+ unsigned int offset, u32 data)
+{
+ iowrite32(data, nbpf->base + offset);
+ dev_dbg(nbpf->dma_dev.dev, "%s(0x%p + 0x%x) = 0x%x\n",
+ __func__, nbpf->base, offset, data);
+}
+
+static void nbpf_chan_halt(struct nbpf_channel *chan)
+{
+ nbpf_chan_write(chan, NBPF_CHAN_CTRL, NBPF_CHAN_CTRL_CLREN);
+}
+
+static bool nbpf_status_get(struct nbpf_channel *chan)
+{
+ u32 status = nbpf_read(chan->nbpf, NBPF_DSTAT_END);
+
+ return status & BIT(chan - chan->nbpf->chan);
+}
+
+static void nbpf_status_ack(struct nbpf_channel *chan)
+{
+ nbpf_chan_write(chan, NBPF_CHAN_CTRL, NBPF_CHAN_CTRL_CLREND);
+}
+
+static u32 nbpf_error_get(struct nbpf_device *nbpf)
+{
+ return nbpf_read(nbpf, NBPF_DSTAT_ER);
+}
+
+static struct nbpf_channel *nbpf_error_get_channel(struct nbpf_device *nbpf, u32 error)
+{
+ return nbpf->chan + __ffs(error);
+}
+
+static void nbpf_error_clear(struct nbpf_channel *chan)
+{
+ u32 status;
+ int i;
+
+ /* Stop the channel, make sure DMA has been aborted */
+ nbpf_chan_halt(chan);
+
+ for (i = 1000; i; i--) {
+ status = nbpf_chan_read(chan, NBPF_CHAN_STAT);
+ if (!(status & NBPF_CHAN_STAT_TACT))
+ break;
+ cpu_relax();
+ }
+
+ if (!i)
+ dev_err(chan->dma_chan.device->dev,
+ "%s(): abort timeout, channel status 0x%x\n", __func__, status);
+
+ nbpf_chan_write(chan, NBPF_CHAN_CTRL, NBPF_CHAN_CTRL_SWRST);
+}
+
+static int nbpf_start(struct nbpf_desc *desc)
+{
+ struct nbpf_channel *chan = desc->chan;
+ struct nbpf_link_desc *ldesc = list_first_entry(&desc->sg, struct nbpf_link_desc, node);
+
+ nbpf_chan_write(chan, NBPF_CHAN_NXLA, (u32)ldesc->hwdesc_dma_addr);
+ nbpf_chan_write(chan, NBPF_CHAN_CTRL, NBPF_CHAN_CTRL_SETEN | NBPF_CHAN_CTRL_CLRSUS);
+ chan->paused = false;
+
+ /* Software trigger MEMCPY - only MEMCPY uses the block mode */
+ if (ldesc->hwdesc->config & NBPF_CHAN_CFG_TM)
+ nbpf_chan_write(chan, NBPF_CHAN_CTRL, NBPF_CHAN_CTRL_STG);
+
+ dev_dbg(chan->nbpf->dma_dev.dev, "%s(): next 0x%x, cur 0x%x\n", __func__,
+ nbpf_chan_read(chan, NBPF_CHAN_NXLA), nbpf_chan_read(chan, NBPF_CHAN_CRLA));
+
+ return 0;
+}
+
+static void nbpf_chan_prepare(struct nbpf_channel *chan)
+{
+ chan->dmarq_cfg = (chan->flags & NBPF_SLAVE_RQ_HIGH ? NBPF_CHAN_CFG_HIEN : 0) |
+ (chan->flags & NBPF_SLAVE_RQ_LOW ? NBPF_CHAN_CFG_LOEN : 0) |
+ (chan->flags & NBPF_SLAVE_RQ_LEVEL ?
+ NBPF_CHAN_CFG_LVL | (NBPF_CHAN_CFG_AM & 0x200) : 0) |
+ chan->terminal;
+}
+
+static void nbpf_chan_prepare_default(struct nbpf_channel *chan)
+{
+ /* Don't output DMAACK */
+ chan->dmarq_cfg = NBPF_CHAN_CFG_AM & 0x400;
+ chan->terminal = 0;
+ chan->flags = 0;
+}
+
+static void nbpf_chan_configure(struct nbpf_channel *chan)
+{
+ /*
+ * We assume, that only the link mode and DMA request line configuration
+ * have to be set in the configuration register manually. Dynamic
+ * per-transfer configuration will be loaded from transfer descriptors.
+ */
+ nbpf_chan_write(chan, NBPF_CHAN_CFG, NBPF_CHAN_CFG_DMS | chan->dmarq_cfg);
+}
+
+static u32 nbpf_xfer_ds(struct nbpf_device *nbpf, size_t size)
+{
+ /* Maximum supported bursts depend on the buffer size */
+ return min_t(int, __ffs(size), ilog2(nbpf->config->buffer_size * 8));
+}
+
+static size_t nbpf_xfer_size(struct nbpf_device *nbpf,
+ enum dma_slave_buswidth width, u32 burst)
+{
+ size_t size;
+
+ if (!burst)
+ burst = 1;
+
+ switch (width) {
+ case DMA_SLAVE_BUSWIDTH_8_BYTES:
+ size = 8 * burst;
+ break;
+
+ case DMA_SLAVE_BUSWIDTH_4_BYTES:
+ size = 4 * burst;
+ break;
+
+ case DMA_SLAVE_BUSWIDTH_2_BYTES:
+ size = 2 * burst;
+ break;
+
+ default:
+ pr_warn("%s(): invalid bus width %u\n", __func__, width);
+ case DMA_SLAVE_BUSWIDTH_1_BYTE:
+ size = burst;
+ }
+
+ return nbpf_xfer_ds(nbpf, size);
+}
+
+/*
+ * We need a way to recognise slaves, whose data is sent "raw" over the bus,
+ * i.e. it isn't known in advance how many bytes will be received. Therefore
+ * the slave driver has to provide a "large enough" buffer and either read the
+ * buffer, when it is full, or detect, that some data has arrived, then wait for
+ * a timeout, if no more data arrives - receive what's already there. We want to
+ * handle such slaves in a special way to allow an optimised mode for other
+ * users, for whom the amount of data is known in advance. So far there's no way
+ * to recognise such slaves. We use a data-width check to distinguish between
+ * the SD host and the PL011 UART.
+ */
+
+static int nbpf_prep_one(struct nbpf_link_desc *ldesc,
+ enum dma_transfer_direction direction,
+ dma_addr_t src, dma_addr_t dst, size_t size, bool last)
+{
+ struct nbpf_link_reg *hwdesc = ldesc->hwdesc;
+ struct nbpf_desc *desc = ldesc->desc;
+ struct nbpf_channel *chan = desc->chan;
+ struct device *dev = chan->dma_chan.device->dev;
+ size_t mem_xfer, slave_xfer;
+ bool can_burst;
+
+ hwdesc->header = NBPF_HEADER_WBD | NBPF_HEADER_LV |
+ (last ? NBPF_HEADER_LE : 0);
+
+ hwdesc->src_addr = src;
+ hwdesc->dst_addr = dst;
+ hwdesc->transaction_size = size;
+
+ /*
+ * set config: SAD, DAD, DDS, SDS, etc.
+ * Note on transfer sizes: the DMAC can perform unaligned DMA transfers,
+ * but it is important to have transaction size a multiple of both
+ * receiver and transmitter transfer sizes. It is also possible to use
+ * different RAM and device transfer sizes, and it does work well with
+ * some devices, e.g. with V08R07S01E SD host controllers, which can use
+ * 128 byte transfers. But this doesn't work with other devices,
+ * especially when the transaction size is unknown. This is the case,
+ * e.g. with serial drivers like amba-pl011.c. For reception it sets up
+ * the transaction size of 4K and if fewer bytes are received, it
+ * pauses DMA and reads out data received via DMA as well as those left
+ * in the Rx FIFO. For this to work with the RAM side using burst
+ * transfers we enable the SBE bit and terminate the transfer in our
+ * DMA_PAUSE handler.
+ */
+ mem_xfer = nbpf_xfer_ds(chan->nbpf, size);
+
+ switch (direction) {
+ case DMA_DEV_TO_MEM:
+ can_burst = chan->slave_src_width >= 3;
+ slave_xfer = min(mem_xfer, can_burst ?
+ chan->slave_src_burst : chan->slave_src_width);
+ /*
+ * Is the slave narrower than 64 bits, i.e. isn't using the full
+ * bus width and cannot use bursts?
+ */
+ if (mem_xfer > chan->slave_src_burst && !can_burst)
+ mem_xfer = chan->slave_src_burst;
+ /* Device-to-RAM DMA is unreliable without REQD set */
+ hwdesc->config = NBPF_CHAN_CFG_SAD | (NBPF_CHAN_CFG_DDS & (mem_xfer << 16)) |
+ (NBPF_CHAN_CFG_SDS & (slave_xfer << 12)) | NBPF_CHAN_CFG_REQD |
+ NBPF_CHAN_CFG_SBE;
+ break;
+
+ case DMA_MEM_TO_DEV:
+ slave_xfer = min(mem_xfer, chan->slave_dst_width >= 3 ?
+ chan->slave_dst_burst : chan->slave_dst_width);
+ hwdesc->config = NBPF_CHAN_CFG_DAD | (NBPF_CHAN_CFG_SDS & (mem_xfer << 12)) |
+ (NBPF_CHAN_CFG_DDS & (slave_xfer << 16)) | NBPF_CHAN_CFG_REQD;
+ break;
+
+ case DMA_MEM_TO_MEM:
+ hwdesc->config = NBPF_CHAN_CFG_TCM | NBPF_CHAN_CFG_TM |
+ (NBPF_CHAN_CFG_SDS & (mem_xfer << 12)) |
+ (NBPF_CHAN_CFG_DDS & (mem_xfer << 16));
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ hwdesc->config |= chan->dmarq_cfg | (last ? 0 : NBPF_CHAN_CFG_DEM) |
+ NBPF_CHAN_CFG_DMS;
+
+ dev_dbg(dev, "%s(): desc @ %pad: hdr 0x%x, cfg 0x%x, %zu @ %pad -> %pad\n",
+ __func__, &ldesc->hwdesc_dma_addr, hwdesc->header,
+ hwdesc->config, size, &src, &dst);
+
+ dma_sync_single_for_device(dev, ldesc->hwdesc_dma_addr, sizeof(*hwdesc),
+ DMA_TO_DEVICE);
+
+ return 0;
+}
+
+static size_t nbpf_bytes_left(struct nbpf_channel *chan)
+{
+ return nbpf_chan_read(chan, NBPF_CHAN_CUR_TR_BYTE);
+}
+
+static void nbpf_configure(struct nbpf_device *nbpf)
+{
+ nbpf_write(nbpf, NBPF_CTRL, NBPF_CTRL_LVINT);
+}
+
+static void nbpf_pause(struct nbpf_channel *chan)
+{
+ nbpf_chan_write(chan, NBPF_CHAN_CTRL, NBPF_CHAN_CTRL_SETSUS);
+ /* See comment in nbpf_prep_one() */
+ nbpf_chan_write(chan, NBPF_CHAN_CTRL, NBPF_CHAN_CTRL_CLREN);
+}
+
+/* Generic part */
+
+/* DMA ENGINE functions */
+static void nbpf_issue_pending(struct dma_chan *dchan)
+{
+ struct nbpf_channel *chan = nbpf_to_chan(dchan);
+ unsigned long flags;
+
+ dev_dbg(dchan->device->dev, "Entry %s()\n", __func__);
+
+ spin_lock_irqsave(&chan->lock, flags);
+ if (list_empty(&chan->queued))
+ goto unlock;
+
+ list_splice_tail_init(&chan->queued, &chan->active);
+
+ if (!chan->running) {
+ struct nbpf_desc *desc = list_first_entry(&chan->active,
+ struct nbpf_desc, node);
+ if (!nbpf_start(desc))
+ chan->running = desc;
+ }
+
+unlock:
+ spin_unlock_irqrestore(&chan->lock, flags);
+}
+
+static enum dma_status nbpf_tx_status(struct dma_chan *dchan,
+ dma_cookie_t cookie, struct dma_tx_state *state)
+{
+ struct nbpf_channel *chan = nbpf_to_chan(dchan);
+ enum dma_status status = dma_cookie_status(dchan, cookie, state);
+
+ if (state) {
+ dma_cookie_t running;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chan->lock, flags);
+ running = chan->running ? chan->running->async_tx.cookie : -EINVAL;
+
+ if (cookie == running) {
+ state->residue = nbpf_bytes_left(chan);
+ dev_dbg(dchan->device->dev, "%s(): residue %u\n", __func__,
+ state->residue);
+ } else if (status == DMA_IN_PROGRESS) {
+ struct nbpf_desc *desc;
+ bool found = false;
+
+ list_for_each_entry(desc, &chan->active, node)
+ if (desc->async_tx.cookie == cookie) {
+ found = true;
+ break;
+ }
+
+ if (!found)
+ list_for_each_entry(desc, &chan->queued, node)
+ if (desc->async_tx.cookie == cookie) {
+ found = true;
+ break;
+
+ }
+
+ state->residue = found ? desc->length : 0;
+ }
+
+ spin_unlock_irqrestore(&chan->lock, flags);
+ }
+
+ if (chan->paused)
+ status = DMA_PAUSED;
+
+ return status;
+}
+
+static dma_cookie_t nbpf_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+ struct nbpf_desc *desc = container_of(tx, struct nbpf_desc, async_tx);
+ struct nbpf_channel *chan = desc->chan;
+ unsigned long flags;
+ dma_cookie_t cookie;
+
+ spin_lock_irqsave(&chan->lock, flags);
+ cookie = dma_cookie_assign(tx);
+ list_add_tail(&desc->node, &chan->queued);
+ spin_unlock_irqrestore(&chan->lock, flags);
+
+ dev_dbg(chan->dma_chan.device->dev, "Entry %s(%d)\n", __func__, cookie);
+
+ return cookie;
+}
+
+static int nbpf_desc_page_alloc(struct nbpf_channel *chan)
+{
+ struct dma_chan *dchan = &chan->dma_chan;
+ struct nbpf_desc_page *dpage = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA);
+ struct nbpf_link_desc *ldesc;
+ struct nbpf_link_reg *hwdesc;
+ struct nbpf_desc *desc;
+ LIST_HEAD(head);
+ LIST_HEAD(lhead);
+ int i;
+ struct device *dev = dchan->device->dev;
+
+ if (!dpage)
+ return -ENOMEM;
+
+ dev_dbg(dev, "%s(): alloc %lu descriptors, %lu segments, total alloc %zu\n",
+ __func__, NBPF_DESCS_PER_PAGE, NBPF_SEGMENTS_PER_PAGE, sizeof(*dpage));
+
+ for (i = 0, ldesc = dpage->ldesc, hwdesc = dpage->hwdesc;
+ i < ARRAY_SIZE(dpage->ldesc);
+ i++, ldesc++, hwdesc++) {
+ ldesc->hwdesc = hwdesc;
+ list_add_tail(&ldesc->node, &lhead);
+ ldesc->hwdesc_dma_addr = dma_map_single(dchan->device->dev,
+ hwdesc, sizeof(*hwdesc), DMA_TO_DEVICE);
+
+ dev_dbg(dev, "%s(): mapped 0x%p to %pad\n", __func__,
+ hwdesc, &ldesc->hwdesc_dma_addr);
+ }
+
+ for (i = 0, desc = dpage->desc;
+ i < ARRAY_SIZE(dpage->desc);
+ i++, desc++) {
+ dma_async_tx_descriptor_init(&desc->async_tx, dchan);
+ desc->async_tx.tx_submit = nbpf_tx_submit;
+ desc->chan = chan;
+ INIT_LIST_HEAD(&desc->sg);
+ list_add_tail(&desc->node, &head);
+ }
+
+ /*
+ * This function cannot be called from interrupt context, so, no need to
+ * save flags
+ */
+ spin_lock_irq(&chan->lock);
+ list_splice_tail(&lhead, &chan->free_links);
+ list_splice_tail(&head, &chan->free);
+ list_add(&dpage->node, &chan->desc_page);
+ spin_unlock_irq(&chan->lock);
+
+ return ARRAY_SIZE(dpage->desc);
+}
+
+static void nbpf_desc_put(struct nbpf_desc *desc)
+{
+ struct nbpf_channel *chan = desc->chan;
+ struct nbpf_link_desc *ldesc, *tmp;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chan->lock, flags);
+ list_for_each_entry_safe(ldesc, tmp, &desc->sg, node)
+ list_move(&ldesc->node, &chan->free_links);
+
+ list_add(&desc->node, &chan->free);
+ spin_unlock_irqrestore(&chan->lock, flags);
+}
+
+static void nbpf_scan_acked(struct nbpf_channel *chan)
+{
+ struct nbpf_desc *desc, *tmp;
+ unsigned long flags;
+ LIST_HEAD(head);
+
+ spin_lock_irqsave(&chan->lock, flags);
+ list_for_each_entry_safe(desc, tmp, &chan->done, node)
+ if (async_tx_test_ack(&desc->async_tx) && desc->user_wait) {
+ list_move(&desc->node, &head);
+ desc->user_wait = false;
+ }
+ spin_unlock_irqrestore(&chan->lock, flags);
+
+ list_for_each_entry_safe(desc, tmp, &head, node) {
+ list_del(&desc->node);
+ nbpf_desc_put(desc);
+ }
+}
+
+/*
+ * We have to allocate descriptors with the channel lock dropped. This means,
+ * before we re-acquire the lock buffers can be taken already, so we have to
+ * re-check after re-acquiring the lock and possibly retry, if buffers are gone
+ * again.
+ */
+static struct nbpf_desc *nbpf_desc_get(struct nbpf_channel *chan, size_t len)
+{
+ struct nbpf_desc *desc = NULL;
+ struct nbpf_link_desc *ldesc, *prev = NULL;
+
+ nbpf_scan_acked(chan);
+
+ spin_lock_irq(&chan->lock);
+
+ do {
+ int i = 0, ret;
+
+ if (list_empty(&chan->free)) {
+ /* No more free descriptors */
+ spin_unlock_irq(&chan->lock);
+ ret = nbpf_desc_page_alloc(chan);
+ if (ret < 0)
+ return NULL;
+ spin_lock_irq(&chan->lock);
+ continue;
+ }
+ desc = list_first_entry(&chan->free, struct nbpf_desc, node);
+ list_del(&desc->node);
+
+ do {
+ if (list_empty(&chan->free_links)) {
+ /* No more free link descriptors */
+ spin_unlock_irq(&chan->lock);
+ ret = nbpf_desc_page_alloc(chan);
+ if (ret < 0) {
+ nbpf_desc_put(desc);
+ return NULL;
+ }
+ spin_lock_irq(&chan->lock);
+ continue;
+ }
+
+ ldesc = list_first_entry(&chan->free_links,
+ struct nbpf_link_desc, node);
+ ldesc->desc = desc;
+ if (prev)
+ prev->hwdesc->next = (u32)ldesc->hwdesc_dma_addr;
+
+ prev = ldesc;
+ list_move_tail(&ldesc->node, &desc->sg);
+
+ i++;
+ } while (i < len);
+ } while (!desc);
+
+ prev->hwdesc->next = 0;
+
+ spin_unlock_irq(&chan->lock);
+
+ return desc;
+}
+
+static void nbpf_chan_idle(struct nbpf_channel *chan)
+{
+ struct nbpf_desc *desc, *tmp;
+ unsigned long flags;
+ LIST_HEAD(head);
+
+ spin_lock_irqsave(&chan->lock, flags);
+
+ list_splice_init(&chan->done, &head);
+ list_splice_init(&chan->active, &head);
+ list_splice_init(&chan->queued, &head);
+
+ chan->running = NULL;
+
+ spin_unlock_irqrestore(&chan->lock, flags);
+
+ list_for_each_entry_safe(desc, tmp, &head, node) {
+ dev_dbg(chan->nbpf->dma_dev.dev, "%s(): force-free desc %p cookie %d\n",
+ __func__, desc, desc->async_tx.cookie);
+ list_del(&desc->node);
+ nbpf_desc_put(desc);
+ }
+}
+
+static int nbpf_control(struct dma_chan *dchan, enum dma_ctrl_cmd cmd,
+ unsigned long arg)
+{
+ struct nbpf_channel *chan = nbpf_to_chan(dchan);
+ struct dma_slave_config *config;
+
+ dev_dbg(dchan->device->dev, "Entry %s(%d)\n", __func__, cmd);
+
+ switch (cmd) {
+ case DMA_TERMINATE_ALL:
+ dev_dbg(dchan->device->dev, "Terminating\n");
+ nbpf_chan_halt(chan);
+ nbpf_chan_idle(chan);
+ break;
+
+ case DMA_SLAVE_CONFIG:
+ if (!arg)
+ return -EINVAL;
+ config = (struct dma_slave_config *)arg;
+
+ /*
+ * We could check config->slave_id to match chan->terminal here,
+ * but with DT they would be coming from the same source, so
+ * such a check would be superflous
+ */
+
+ chan->slave_dst_addr = config->dst_addr;
+ chan->slave_dst_width = nbpf_xfer_size(chan->nbpf,
+ config->dst_addr_width, 1);
+ chan->slave_dst_burst = nbpf_xfer_size(chan->nbpf,
+ config->dst_addr_width,
+ config->dst_maxburst);
+ chan->slave_src_addr = config->src_addr;
+ chan->slave_src_width = nbpf_xfer_size(chan->nbpf,
+ config->src_addr_width, 1);
+ chan->slave_src_burst = nbpf_xfer_size(chan->nbpf,
+ config->src_addr_width,
+ config->src_maxburst);
+ break;
+
+ case DMA_PAUSE:
+ chan->paused = true;
+ nbpf_pause(chan);
+ break;
+
+ default:
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
+static struct dma_async_tx_descriptor *nbpf_prep_sg(struct nbpf_channel *chan,
+ struct scatterlist *src_sg, struct scatterlist *dst_sg,
+ size_t len, enum dma_transfer_direction direction,
+ unsigned long flags)
+{
+ struct nbpf_link_desc *ldesc;
+ struct scatterlist *mem_sg;
+ struct nbpf_desc *desc;
+ bool inc_src, inc_dst;
+ size_t data_len = 0;
+ int i = 0;
+
+ switch (direction) {
+ case DMA_DEV_TO_MEM:
+ mem_sg = dst_sg;
+ inc_src = false;
+ inc_dst = true;
+ break;
+
+ case DMA_MEM_TO_DEV:
+ mem_sg = src_sg;
+ inc_src = true;
+ inc_dst = false;
+ break;
+
+ default:
+ case DMA_MEM_TO_MEM:
+ mem_sg = src_sg;
+ inc_src = true;
+ inc_dst = true;
+ }
+
+ desc = nbpf_desc_get(chan, len);
+ if (!desc)
+ return NULL;
+
+ desc->async_tx.flags = flags;
+ desc->async_tx.cookie = -EBUSY;
+ desc->user_wait = false;
+
+ /*
+ * This is a private descriptor list, and we own the descriptor. No need
+ * to lock.
+ */
+ list_for_each_entry(ldesc, &desc->sg, node) {
+ int ret = nbpf_prep_one(ldesc, direction,
+ sg_dma_address(src_sg),
+ sg_dma_address(dst_sg),
+ sg_dma_len(mem_sg),
+ i == len - 1);
+ if (ret < 0) {
+ nbpf_desc_put(desc);
+ return NULL;
+ }
+ data_len += sg_dma_len(mem_sg);
+ if (inc_src)
+ src_sg = sg_next(src_sg);
+ if (inc_dst)
+ dst_sg = sg_next(dst_sg);
+ mem_sg = direction == DMA_DEV_TO_MEM ? dst_sg : src_sg;
+ i++;
+ }
+
+ desc->length = data_len;
+
+ /* The user has to return the descriptor to us ASAP via .tx_submit() */
+ return &desc->async_tx;
+}
+
+static struct dma_async_tx_descriptor *nbpf_prep_memcpy(
+ struct dma_chan *dchan, dma_addr_t dst, dma_addr_t src,
+ size_t len, unsigned long flags)
+{
+ struct nbpf_channel *chan = nbpf_to_chan(dchan);
+ struct scatterlist dst_sg;
+ struct scatterlist src_sg;
+
+ sg_init_table(&dst_sg, 1);
+ sg_init_table(&src_sg, 1);
+
+ sg_dma_address(&dst_sg) = dst;
+ sg_dma_address(&src_sg) = src;
+
+ sg_dma_len(&dst_sg) = len;
+ sg_dma_len(&src_sg) = len;
+
+ dev_dbg(dchan->device->dev, "%s(): %zu @ %pad -> %pad\n",
+ __func__, len, &src, &dst);
+
+ return nbpf_prep_sg(chan, &src_sg, &dst_sg, 1,
+ DMA_MEM_TO_MEM, flags);
+}
+
+static struct dma_async_tx_descriptor *nbpf_prep_memcpy_sg(
+ struct dma_chan *dchan,
+ struct scatterlist *dst_sg, unsigned int dst_nents,
+ struct scatterlist *src_sg, unsigned int src_nents,
+ unsigned long flags)
+{
+ struct nbpf_channel *chan = nbpf_to_chan(dchan);
+
+ if (dst_nents != src_nents)
+ return NULL;
+
+ return nbpf_prep_sg(chan, src_sg, dst_sg, src_nents,
+ DMA_MEM_TO_MEM, flags);
+}
+
+static struct dma_async_tx_descriptor *nbpf_prep_slave_sg(
+ struct dma_chan *dchan, struct scatterlist *sgl, unsigned int sg_len,
+ enum dma_transfer_direction direction, unsigned long flags, void *context)
+{
+ struct nbpf_channel *chan = nbpf_to_chan(dchan);
+ struct scatterlist slave_sg;
+
+ dev_dbg(dchan->device->dev, "Entry %s()\n", __func__);
+
+ sg_init_table(&slave_sg, 1);
+
+ switch (direction) {
+ case DMA_MEM_TO_DEV:
+ sg_dma_address(&slave_sg) = chan->slave_dst_addr;
+ return nbpf_prep_sg(chan, sgl, &slave_sg, sg_len,
+ direction, flags);
+
+ case DMA_DEV_TO_MEM:
+ sg_dma_address(&slave_sg) = chan->slave_src_addr;
+ return nbpf_prep_sg(chan, &slave_sg, sgl, sg_len,
+ direction, flags);
+
+ default:
+ return NULL;
+ }
+}
+
+static int nbpf_alloc_chan_resources(struct dma_chan *dchan)
+{
+ struct nbpf_channel *chan = nbpf_to_chan(dchan);
+ int ret;
+
+ INIT_LIST_HEAD(&chan->free);
+ INIT_LIST_HEAD(&chan->free_links);
+ INIT_LIST_HEAD(&chan->queued);
+ INIT_LIST_HEAD(&chan->active);
+ INIT_LIST_HEAD(&chan->done);
+
+ ret = nbpf_desc_page_alloc(chan);
+ if (ret < 0)
+ return ret;
+
+ dev_dbg(dchan->device->dev, "Entry %s(): terminal %u\n", __func__,
+ chan->terminal);
+
+ nbpf_chan_configure(chan);
+
+ return ret;
+}
+
+static void nbpf_free_chan_resources(struct dma_chan *dchan)
+{
+ struct nbpf_channel *chan = nbpf_to_chan(dchan);
+ struct nbpf_desc_page *dpage, *tmp;
+
+ dev_dbg(dchan->device->dev, "Entry %s()\n", __func__);
+
+ nbpf_chan_halt(chan);
+ nbpf_chan_idle(chan);
+ /* Clean up for if a channel is re-used for MEMCPY after slave DMA */
+ nbpf_chan_prepare_default(chan);
+
+ list_for_each_entry_safe(dpage, tmp, &chan->desc_page, node) {
+ struct nbpf_link_desc *ldesc;
+ int i;
+ list_del(&dpage->node);
+ for (i = 0, ldesc = dpage->ldesc;
+ i < ARRAY_SIZE(dpage->ldesc);
+ i++, ldesc++)
+ dma_unmap_single(dchan->device->dev, ldesc->hwdesc_dma_addr,
+ sizeof(*ldesc->hwdesc), DMA_TO_DEVICE);
+ free_page((unsigned long)dpage);
+ }
+}
+
+static int nbpf_slave_caps(struct dma_chan *dchan,
+ struct dma_slave_caps *caps)
+{
+ caps->src_addr_widths = NBPF_DMA_BUSWIDTHS;
+ caps->dstn_addr_widths = NBPF_DMA_BUSWIDTHS;
+ caps->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
+ caps->cmd_pause = false;
+ caps->cmd_terminate = true;
+
+ return 0;
+}
+
+static struct dma_chan *nbpf_of_xlate(struct of_phandle_args *dma_spec,
+ struct of_dma *ofdma)
+{
+ struct nbpf_device *nbpf = ofdma->of_dma_data;
+ struct dma_chan *dchan;
+ struct nbpf_channel *chan;
+
+ if (dma_spec->args_count != 2)
+ return NULL;
+
+ dchan = dma_get_any_slave_channel(&nbpf->dma_dev);
+ if (!dchan)
+ return NULL;
+
+ dev_dbg(dchan->device->dev, "Entry %s(%s)\n", __func__,
+ dma_spec->np->name);
+
+ chan = nbpf_to_chan(dchan);
+
+ chan->terminal = dma_spec->args[0];
+ chan->flags = dma_spec->args[1];
+
+ nbpf_chan_prepare(chan);
+ nbpf_chan_configure(chan);
+
+ return dchan;
+}
+
+static void nbpf_chan_tasklet(unsigned long data)
+{
+ struct nbpf_channel *chan = (struct nbpf_channel *)data;
+ struct nbpf_desc *desc, *tmp;
+ dma_async_tx_callback callback;
+ void *param;
+
+ while (!list_empty(&chan->done)) {
+ bool found = false, must_put, recycling = false;
+
+ spin_lock_irq(&chan->lock);
+
+ list_for_each_entry_safe(desc, tmp, &chan->done, node) {
+ if (!desc->user_wait) {
+ /* Newly completed descriptor, have to process */
+ found = true;
+ break;
+ } else if (async_tx_test_ack(&desc->async_tx)) {
+ /*
+ * This descriptor was waiting for a user ACK,
+ * it can be recycled now.
+ */
+ list_del(&desc->node);
+ spin_unlock_irq(&chan->lock);
+ nbpf_desc_put(desc);
+ recycling = true;
+ break;
+ }
+ }
+
+ if (recycling)
+ continue;
+
+ if (!found) {
+ /* This can happen if TERMINATE_ALL has been called */
+ spin_unlock_irq(&chan->lock);
+ break;
+ }
+
+ dma_cookie_complete(&desc->async_tx);
+
+ /*
+ * With released lock we cannot dereference desc, maybe it's
+ * still on the "done" list
+ */
+ if (async_tx_test_ack(&desc->async_tx)) {
+ list_del(&desc->node);
+ must_put = true;
+ } else {
+ desc->user_wait = true;
+ must_put = false;
+ }
+
+ callback = desc->async_tx.callback;
+ param = desc->async_tx.callback_param;
+
+ /* ack and callback completed descriptor */
+ spin_unlock_irq(&chan->lock);
+
+ if (callback)
+ callback(param);
+
+ if (must_put)
+ nbpf_desc_put(desc);
+ }
+}
+
+static irqreturn_t nbpf_chan_irq(int irq, void *dev)
+{
+ struct nbpf_channel *chan = dev;
+ bool done = nbpf_status_get(chan);
+ struct nbpf_desc *desc;
+ irqreturn_t ret;
+ bool bh = false;
+
+ if (!done)
+ return IRQ_NONE;
+
+ nbpf_status_ack(chan);
+
+ dev_dbg(&chan->dma_chan.dev->device, "%s()\n", __func__);
+
+ spin_lock(&chan->lock);
+ desc = chan->running;
+ if (WARN_ON(!desc)) {
+ ret = IRQ_NONE;
+ goto unlock;
+ } else {
+ ret = IRQ_HANDLED;
+ bh = true;
+ }
+
+ list_move_tail(&desc->node, &chan->done);
+ chan->running = NULL;
+
+ if (!list_empty(&chan->active)) {
+ desc = list_first_entry(&chan->active,
+ struct nbpf_desc, node);
+ if (!nbpf_start(desc))
+ chan->running = desc;
+ }
+
+unlock:
+ spin_unlock(&chan->lock);
+
+ if (bh)
+ tasklet_schedule(&chan->tasklet);
+
+ return ret;
+}
+
+static irqreturn_t nbpf_err_irq(int irq, void *dev)
+{
+ struct nbpf_device *nbpf = dev;
+ u32 error = nbpf_error_get(nbpf);
+
+ dev_warn(nbpf->dma_dev.dev, "DMA error IRQ %u\n", irq);
+
+ if (!error)
+ return IRQ_NONE;
+
+ do {
+ struct nbpf_channel *chan = nbpf_error_get_channel(nbpf, error);
+ /* On error: abort all queued transfers, no callback */
+ nbpf_error_clear(chan);
+ nbpf_chan_idle(chan);
+ error = nbpf_error_get(nbpf);
+ } while (error);
+
+ return IRQ_HANDLED;
+}
+
+static int nbpf_chan_probe(struct nbpf_device *nbpf, int n)
+{
+ struct dma_device *dma_dev = &nbpf->dma_dev;
+ struct nbpf_channel *chan = nbpf->chan + n;
+ int ret;
+
+ chan->nbpf = nbpf;
+ chan->base = nbpf->base + NBPF_REG_CHAN_OFFSET + NBPF_REG_CHAN_SIZE * n;
+ INIT_LIST_HEAD(&chan->desc_page);
+ spin_lock_init(&chan->lock);
+ chan->dma_chan.device = dma_dev;
+ dma_cookie_init(&chan->dma_chan);
+ nbpf_chan_prepare_default(chan);
+
+ dev_dbg(dma_dev->dev, "%s(): channel %d: -> %p\n", __func__, n, chan->base);
+
+ snprintf(chan->name, sizeof(chan->name), "nbpf %d", n);
+
+ tasklet_init(&chan->tasklet, nbpf_chan_tasklet, (unsigned long)chan);
+ ret = devm_request_irq(dma_dev->dev, chan->irq,
+ nbpf_chan_irq, IRQF_SHARED,
+ chan->name, chan);
+ if (ret < 0)
+ return ret;
+
+ /* Add the channel to DMA device channel list */
+ list_add_tail(&chan->dma_chan.device_node,
+ &dma_dev->channels);
+
+ return 0;
+}
+
+static const struct of_device_id nbpf_match[] = {
+ {.compatible = "renesas,nbpfaxi64dmac1b4", .data = &nbpf_cfg[NBPF1B4]},
+ {.compatible = "renesas,nbpfaxi64dmac1b8", .data = &nbpf_cfg[NBPF1B8]},
+ {.compatible = "renesas,nbpfaxi64dmac1b16", .data = &nbpf_cfg[NBPF1B16]},
+ {.compatible = "renesas,nbpfaxi64dmac4b4", .data = &nbpf_cfg[NBPF4B4]},
+ {.compatible = "renesas,nbpfaxi64dmac4b8", .data = &nbpf_cfg[NBPF4B8]},
+ {.compatible = "renesas,nbpfaxi64dmac4b16", .data = &nbpf_cfg[NBPF4B16]},
+ {.compatible = "renesas,nbpfaxi64dmac8b4", .data = &nbpf_cfg[NBPF8B4]},
+ {.compatible = "renesas,nbpfaxi64dmac8b8", .data = &nbpf_cfg[NBPF8B8]},
+ {.compatible = "renesas,nbpfaxi64dmac8b16", .data = &nbpf_cfg[NBPF8B16]},
+ {}
+};
+MODULE_DEVICE_TABLE(of, nbpf_match);
+
+static int nbpf_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct of_device_id *of_id = of_match_device(nbpf_match, dev);
+ struct device_node *np = dev->of_node;
+ struct nbpf_device *nbpf;
+ struct dma_device *dma_dev;
+ struct resource *iomem, *irq_res;
+ const struct nbpf_config *cfg;
+ int num_channels;
+ int ret, irq, eirq, i;
+ int irqbuf[9] /* maximum 8 channels + error IRQ */;
+ unsigned int irqs = 0;
+
+ BUILD_BUG_ON(sizeof(struct nbpf_desc_page) > PAGE_SIZE);
+
+ /* DT only */
+ if (!np || !of_id || !of_id->data)
+ return -ENODEV;
+
+ cfg = of_id->data;
+ num_channels = cfg->num_channels;
+
+ nbpf = devm_kzalloc(dev, sizeof(*nbpf) + num_channels *
+ sizeof(nbpf->chan[0]), GFP_KERNEL);
+ if (!nbpf) {
+ dev_err(dev, "Memory allocation failed\n");
+ return -ENOMEM;
+ }
+ dma_dev = &nbpf->dma_dev;
+ dma_dev->dev = dev;
+
+ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ nbpf->base = devm_ioremap_resource(dev, iomem);
+ if (IS_ERR(nbpf->base))
+ return PTR_ERR(nbpf->base);
+
+ nbpf->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(nbpf->clk))
+ return PTR_ERR(nbpf->clk);
+
+ nbpf->config = cfg;
+
+ for (i = 0; irqs < ARRAY_SIZE(irqbuf); i++) {
+ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
+ if (!irq_res)
+ break;
+
+ for (irq = irq_res->start; irq <= irq_res->end;
+ irq++, irqs++)
+ irqbuf[irqs] = irq;
+ }
+
+ /*
+ * 3 IRQ resource schemes are supported:
+ * 1. 1 shared IRQ for error and all channels
+ * 2. 2 IRQs: one for error and one shared for all channels
+ * 3. 1 IRQ for error and an own IRQ for each channel
+ */
+ if (irqs != 1 && irqs != 2 && irqs != num_channels + 1)
+ return -ENXIO;
+
+ if (irqs == 1) {
+ eirq = irqbuf[0];
+
+ for (i = 0; i <= num_channels; i++)
+ nbpf->chan[i].irq = irqbuf[0];
+ } else {
+ eirq = platform_get_irq_byname(pdev, "error");
+ if (eirq < 0)
+ return eirq;
+
+ if (irqs == num_channels + 1) {
+ struct nbpf_channel *chan;
+
+ for (i = 0, chan = nbpf->chan; i <= num_channels;
+ i++, chan++) {
+ /* Skip the error IRQ */
+ if (irqbuf[i] == eirq)
+ i++;
+ chan->irq = irqbuf[i];
+ }
+
+ if (chan != nbpf->chan + num_channels)
+ return -EINVAL;
+ } else {
+ /* 2 IRQs and more than one channel */
+ if (irqbuf[0] == eirq)
+ irq = irqbuf[1];
+ else
+ irq = irqbuf[0];
+
+ for (i = 0; i <= num_channels; i++)
+ nbpf->chan[i].irq = irq;
+ }
+ }
+
+ ret = devm_request_irq(dev, eirq, nbpf_err_irq,
+ IRQF_SHARED, "dma error", nbpf);
+ if (ret < 0)
+ return ret;
+
+ INIT_LIST_HEAD(&dma_dev->channels);
+
+ /* Create DMA Channel */
+ for (i = 0; i < num_channels; i++) {
+ ret = nbpf_chan_probe(nbpf, i);
+ if (ret < 0)
+ return ret;
+ }
+
+ dma_cap_set(DMA_MEMCPY, dma_dev->cap_mask);
+ dma_cap_set(DMA_SLAVE, dma_dev->cap_mask);
+ dma_cap_set(DMA_PRIVATE, dma_dev->cap_mask);
+ dma_cap_set(DMA_SG, dma_dev->cap_mask);
+
+ /* Common and MEMCPY operations */
+ dma_dev->device_alloc_chan_resources
+ = nbpf_alloc_chan_resources;
+ dma_dev->device_free_chan_resources = nbpf_free_chan_resources;
+ dma_dev->device_prep_dma_sg = nbpf_prep_memcpy_sg;
+ dma_dev->device_prep_dma_memcpy = nbpf_prep_memcpy;
+ dma_dev->device_tx_status = nbpf_tx_status;
+ dma_dev->device_issue_pending = nbpf_issue_pending;
+ dma_dev->device_slave_caps = nbpf_slave_caps;
+
+ /*
+ * If we drop support for unaligned MEMCPY buffer addresses and / or
+ * lengths by setting
+ * dma_dev->copy_align = 4;
+ * then we can set transfer length to 4 bytes in nbpf_prep_one() for
+ * DMA_MEM_TO_MEM
+ */
+
+ /* Compulsory for DMA_SLAVE fields */
+ dma_dev->device_prep_slave_sg = nbpf_prep_slave_sg;
+ dma_dev->device_control = nbpf_control;
+
+ platform_set_drvdata(pdev, nbpf);
+
+ ret = clk_prepare_enable(nbpf->clk);
+ if (ret < 0)
+ return ret;
+
+ nbpf_configure(nbpf);
+
+ ret = dma_async_device_register(dma_dev);
+ if (ret < 0)
+ goto e_clk_off;
+
+ ret = of_dma_controller_register(np, nbpf_of_xlate, nbpf);
+ if (ret < 0)
+ goto e_dma_dev_unreg;
+
+ return 0;
+
+e_dma_dev_unreg:
+ dma_async_device_unregister(dma_dev);
+e_clk_off:
+ clk_disable_unprepare(nbpf->clk);
+
+ return ret;
+}
+
+static int nbpf_remove(struct platform_device *pdev)
+{
+ struct nbpf_device *nbpf = platform_get_drvdata(pdev);
+
+ of_dma_controller_free(pdev->dev.of_node);
+ dma_async_device_unregister(&nbpf->dma_dev);
+ clk_disable_unprepare(nbpf->clk);
+
+ return 0;
+}
+
+static struct platform_device_id nbpf_ids[] = {
+ {"nbpfaxi64dmac1b4", (kernel_ulong_t)&nbpf_cfg[NBPF1B4]},
+ {"nbpfaxi64dmac1b8", (kernel_ulong_t)&nbpf_cfg[NBPF1B8]},
+ {"nbpfaxi64dmac1b16", (kernel_ulong_t)&nbpf_cfg[NBPF1B16]},
+ {"nbpfaxi64dmac4b4", (kernel_ulong_t)&nbpf_cfg[NBPF4B4]},
+ {"nbpfaxi64dmac4b8", (kernel_ulong_t)&nbpf_cfg[NBPF4B8]},
+ {"nbpfaxi64dmac4b16", (kernel_ulong_t)&nbpf_cfg[NBPF4B16]},
+ {"nbpfaxi64dmac8b4", (kernel_ulong_t)&nbpf_cfg[NBPF8B4]},
+ {"nbpfaxi64dmac8b8", (kernel_ulong_t)&nbpf_cfg[NBPF8B8]},
+ {"nbpfaxi64dmac8b16", (kernel_ulong_t)&nbpf_cfg[NBPF8B16]},
+ {},
+};
+MODULE_DEVICE_TABLE(platform, nbpf_ids);
+
+#ifdef CONFIG_PM_RUNTIME
+static int nbpf_runtime_suspend(struct device *dev)
+{
+ struct nbpf_device *nbpf = platform_get_drvdata(to_platform_device(dev));
+ clk_disable_unprepare(nbpf->clk);
+ return 0;
+}
+
+static int nbpf_runtime_resume(struct device *dev)
+{
+ struct nbpf_device *nbpf = platform_get_drvdata(to_platform_device(dev));
+ return clk_prepare_enable(nbpf->clk);
+}
+#endif
+
+static const struct dev_pm_ops nbpf_pm_ops = {
+ SET_RUNTIME_PM_OPS(nbpf_runtime_suspend, nbpf_runtime_resume, NULL)
+};
+
+static struct platform_driver nbpf_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "dma-nbpf",
+ .of_match_table = nbpf_match,
+ .pm = &nbpf_pm_ops,
+ },
+ .id_table = nbpf_ids,
+ .probe = nbpf_probe,
+ .remove = nbpf_remove,
+};
+
+module_platform_driver(nbpf_driver);
+
+MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
+MODULE_DESCRIPTION("dmaengine driver for NBPFAXI64* DMACs");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/dma/of-dma.c b/drivers/dma/of-dma.c
index e8fe9dc455f4..d5fbeaa1e7ba 100644
--- a/drivers/dma/of-dma.c
+++ b/drivers/dma/of-dma.c
@@ -218,3 +218,38 @@ struct dma_chan *of_dma_simple_xlate(struct of_phandle_args *dma_spec,
&dma_spec->args[0]);
}
EXPORT_SYMBOL_GPL(of_dma_simple_xlate);
+
+/**
+ * of_dma_xlate_by_chan_id - Translate dt property to DMA channel by channel id
+ * @dma_spec: pointer to DMA specifier as found in the device tree
+ * @of_dma: pointer to DMA controller data
+ *
+ * This function can be used as the of xlate callback for DMA driver which wants
+ * to match the channel based on the channel id. When using this xlate function
+ * the #dma-cells propety of the DMA controller dt node needs to be set to 1.
+ * The data parameter of of_dma_controller_register must be a pointer to the
+ * dma_device struct the function should match upon.
+ *
+ * Returns pointer to appropriate dma channel on success or NULL on error.
+ */
+struct dma_chan *of_dma_xlate_by_chan_id(struct of_phandle_args *dma_spec,
+ struct of_dma *ofdma)
+{
+ struct dma_device *dev = ofdma->of_dma_data;
+ struct dma_chan *chan, *candidate = NULL;
+
+ if (!dev || dma_spec->args_count != 1)
+ return NULL;
+
+ list_for_each_entry(chan, &dev->channels, device_node)
+ if (chan->chan_id == dma_spec->args[0]) {
+ candidate = chan;
+ break;
+ }
+
+ if (!candidate)
+ return NULL;
+
+ return dma_get_slave_channel(candidate);
+}
+EXPORT_SYMBOL_GPL(of_dma_xlate_by_chan_id);
diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
index b19f04f4390b..4cf7d9a950d7 100644
--- a/drivers/dma/omap-dma.c
+++ b/drivers/dma/omap-dma.c
@@ -853,8 +853,7 @@ static struct dma_async_tx_descriptor *omap_dma_prep_slave_sg(
static struct dma_async_tx_descriptor *omap_dma_prep_dma_cyclic(
struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
- size_t period_len, enum dma_transfer_direction dir, unsigned long flags,
- void *context)
+ size_t period_len, enum dma_transfer_direction dir, unsigned long flags)
{
struct omap_dmadev *od = to_omap_dma_dev(chan->device);
struct omap_chan *c = to_omap_dma_chan(chan);
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 73fa9b7a10ab..d5149aacd2fe 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -33,26 +33,15 @@
#define PL330_MAX_IRQS 32
#define PL330_MAX_PERI 32
-enum pl330_srccachectrl {
- SCCTRL0, /* Noncacheable and nonbufferable */
- SCCTRL1, /* Bufferable only */
- SCCTRL2, /* Cacheable, but do not allocate */
- SCCTRL3, /* Cacheable and bufferable, but do not allocate */
- SINVALID1,
- SINVALID2,
- SCCTRL6, /* Cacheable write-through, allocate on reads only */
- SCCTRL7, /* Cacheable write-back, allocate on reads only */
-};
-
-enum pl330_dstcachectrl {
- DCCTRL0, /* Noncacheable and nonbufferable */
- DCCTRL1, /* Bufferable only */
- DCCTRL2, /* Cacheable, but do not allocate */
- DCCTRL3, /* Cacheable and bufferable, but do not allocate */
- DINVALID1, /* AWCACHE = 0x1000 */
- DINVALID2,
- DCCTRL6, /* Cacheable write-through, allocate on writes only */
- DCCTRL7, /* Cacheable write-back, allocate on writes only */
+enum pl330_cachectrl {
+ CCTRL0, /* Noncacheable and nonbufferable */
+ CCTRL1, /* Bufferable only */
+ CCTRL2, /* Cacheable, but do not allocate */
+ CCTRL3, /* Cacheable and bufferable, but do not allocate */
+ INVALID1, /* AWCACHE = 0x1000 */
+ INVALID2,
+ CCTRL6, /* Cacheable write-through, allocate on writes only */
+ CCTRL7, /* Cacheable write-back, allocate on writes only */
};
enum pl330_byteswap {
@@ -63,13 +52,6 @@ enum pl330_byteswap {
SWAP_16,
};
-enum pl330_reqtype {
- MEMTOMEM,
- MEMTODEV,
- DEVTOMEM,
- DEVTODEV,
-};
-
/* Register and Bit field Definitions */
#define DS 0x0
#define DS_ST_STOP 0x0
@@ -263,9 +245,6 @@ enum pl330_reqtype {
*/
#define MCODE_BUFF_PER_REQ 256
-/* If the _pl330_req is available to the client */
-#define IS_FREE(req) (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND)
-
/* Use this _only_ to wait on transient states */
#define UNTIL(t, s) while (!(_state(t) & (s))) cpu_relax();
@@ -300,27 +279,6 @@ struct pl330_config {
u32 irq_ns;
};
-/* Handle to the DMAC provided to the PL330 core */
-struct pl330_info {
- /* Owning device */
- struct device *dev;
- /* Size of MicroCode buffers for each channel. */
- unsigned mcbufsz;
- /* ioremap'ed address of PL330 registers. */
- void __iomem *base;
- /* Client can freely use it. */
- void *client_data;
- /* PL330 core data, Client must not touch it. */
- void *pl330_data;
- /* Populated by the PL330 core driver during pl330_add */
- struct pl330_config pcfg;
- /*
- * If the DMAC has some reset mechanism, then the
- * client may want to provide pointer to the method.
- */
- void (*dmac_reset)(struct pl330_info *pi);
-};
-
/**
* Request Configuration.
* The PL330 core does not modify this and uses the last
@@ -344,8 +302,8 @@ struct pl330_reqcfg {
unsigned brst_len:5;
unsigned brst_size:3; /* in power of 2 */
- enum pl330_dstcachectrl dcctl;
- enum pl330_srccachectrl scctl;
+ enum pl330_cachectrl dcctl;
+ enum pl330_cachectrl scctl;
enum pl330_byteswap swap;
struct pl330_config *pcfg;
};
@@ -359,11 +317,6 @@ struct pl330_xfer {
u32 dst_addr;
/* Size to xfer */
u32 bytes;
- /*
- * Pointer to next xfer in the list.
- * The last xfer in the req must point to NULL.
- */
- struct pl330_xfer *next;
};
/* The xfer callbacks are made with one of these arguments. */
@@ -376,67 +329,6 @@ enum pl330_op_err {
PL330_ERR_FAIL,
};
-/* A request defining Scatter-Gather List ending with NULL xfer. */
-struct pl330_req {
- enum pl330_reqtype rqtype;
- /* Index of peripheral for the xfer. */
- unsigned peri:5;
- /* Unique token for this xfer, set by the client. */
- void *token;
- /* Callback to be called after xfer. */
- void (*xfer_cb)(void *token, enum pl330_op_err err);
- /* If NULL, req will be done at last set parameters. */
- struct pl330_reqcfg *cfg;
- /* Pointer to first xfer in the request. */
- struct pl330_xfer *x;
- /* Hook to attach to DMAC's list of reqs with due callback */
- struct list_head rqd;
-};
-
-/*
- * To know the status of the channel and DMAC, the client
- * provides a pointer to this structure. The PL330 core
- * fills it with current information.
- */
-struct pl330_chanstatus {
- /*
- * If the DMAC engine halted due to some error,
- * the client should remove-add DMAC.
- */
- bool dmac_halted;
- /*
- * If channel is halted due to some error,
- * the client should ABORT/FLUSH and START the channel.
- */
- bool faulting;
- /* Location of last load */
- u32 src_addr;
- /* Location of last store */
- u32 dst_addr;
- /*
- * Pointer to the currently active req, NULL if channel is
- * inactive, even though the requests may be present.
- */
- struct pl330_req *top_req;
- /* Pointer to req waiting second in the queue if any. */
- struct pl330_req *wait_req;
-};
-
-enum pl330_chan_op {
- /* Start the channel */
- PL330_OP_START,
- /* Abort the active xfer */
- PL330_OP_ABORT,
- /* Stop xfer and flush queue */
- PL330_OP_FLUSH,
-};
-
-struct _xfer_spec {
- u32 ccr;
- struct pl330_req *r;
- struct pl330_xfer *x;
-};
-
enum dmamov_dst {
SAR = 0,
CCR,
@@ -454,12 +346,12 @@ enum pl330_cond {
ALWAYS,
};
+struct dma_pl330_desc;
+
struct _pl330_req {
u32 mc_bus;
void *mc_cpu;
- /* Number of bytes taken to setup MC for the req */
- u32 mc_len;
- struct pl330_req *r;
+ struct dma_pl330_desc *desc;
};
/* ToBeDone for tasklet */
@@ -491,30 +383,6 @@ enum pl330_dmac_state {
DYING,
};
-/* A DMAC */
-struct pl330_dmac {
- spinlock_t lock;
- /* Holds list of reqs with due callbacks */
- struct list_head req_done;
- /* Pointer to platform specific stuff */
- struct pl330_info *pinfo;
- /* Maximum possible events/irqs */
- int events[32];
- /* BUS address of MicroCode buffer */
- dma_addr_t mcode_bus;
- /* CPU address of MicroCode buffer */
- void *mcode_cpu;
- /* List of all Channel threads */
- struct pl330_thread *channels;
- /* Pointer to the MANAGER thread */
- struct pl330_thread *manager;
- /* To handle bad news in interrupt */
- struct tasklet_struct tasks;
- struct _pl330_tbd dmac_tbd;
- /* State of DMAC operation */
- enum pl330_dmac_state state;
-};
-
enum desc_status {
/* In the DMAC pool */
FREE,
@@ -555,15 +423,16 @@ struct dma_pl330_chan {
* As the parent, this DMAC also provides descriptors
* to the channel.
*/
- struct dma_pl330_dmac *dmac;
+ struct pl330_dmac *dmac;
/* To protect channel manipulation */
spinlock_t lock;
- /* Token of a hardware channel thread of PL330 DMAC
- * NULL if the channel is available to be acquired.
+ /*
+ * Hardware channel thread of PL330 DMAC. NULL if the channel is
+ * available.
*/
- void *pl330_chid;
+ struct pl330_thread *thread;
/* For D-to-M and M-to-D channels */
int burst_sz; /* the peripheral fifo width */
@@ -574,9 +443,7 @@ struct dma_pl330_chan {
bool cyclic;
};
-struct dma_pl330_dmac {
- struct pl330_info pif;
-
+struct pl330_dmac {
/* DMA-Engine Device */
struct dma_device ddma;
@@ -588,6 +455,32 @@ struct dma_pl330_dmac {
/* To protect desc_pool manipulation */
spinlock_t pool_lock;
+ /* Size of MicroCode buffers for each channel. */
+ unsigned mcbufsz;
+ /* ioremap'ed address of PL330 registers. */
+ void __iomem *base;
+ /* Populated by the PL330 core driver during pl330_add */
+ struct pl330_config pcfg;
+
+ spinlock_t lock;
+ /* Maximum possible events/irqs */
+ int events[32];
+ /* BUS address of MicroCode buffer */
+ dma_addr_t mcode_bus;
+ /* CPU address of MicroCode buffer */
+ void *mcode_cpu;
+ /* List of all Channel threads */
+ struct pl330_thread *channels;
+ /* Pointer to the MANAGER thread */
+ struct pl330_thread *manager;
+ /* To handle bad news in interrupt */
+ struct tasklet_struct tasks;
+ struct _pl330_tbd dmac_tbd;
+ /* State of DMAC operation */
+ enum pl330_dmac_state state;
+ /* Holds list of reqs with due callbacks */
+ struct list_head req_done;
+
/* Peripheral channels connected to this DMAC */
unsigned int num_peripherals;
struct dma_pl330_chan *peripherals; /* keep at end */
@@ -604,49 +497,43 @@ struct dma_pl330_desc {
struct pl330_xfer px;
struct pl330_reqcfg rqcfg;
- struct pl330_req req;
enum desc_status status;
/* The channel which currently holds this desc */
struct dma_pl330_chan *pchan;
+
+ enum dma_transfer_direction rqtype;
+ /* Index of peripheral for the xfer. */
+ unsigned peri:5;
+ /* Hook to attach to DMAC's list of reqs with due callback */
+ struct list_head rqd;
};
-static inline void _callback(struct pl330_req *r, enum pl330_op_err err)
-{
- if (r && r->xfer_cb)
- r->xfer_cb(r->token, err);
-}
+struct _xfer_spec {
+ u32 ccr;
+ struct dma_pl330_desc *desc;
+};
static inline bool _queue_empty(struct pl330_thread *thrd)
{
- return (IS_FREE(&thrd->req[0]) && IS_FREE(&thrd->req[1]))
- ? true : false;
+ return thrd->req[0].desc == NULL && thrd->req[1].desc == NULL;
}
static inline bool _queue_full(struct pl330_thread *thrd)
{
- return (IS_FREE(&thrd->req[0]) || IS_FREE(&thrd->req[1]))
- ? false : true;
+ return thrd->req[0].desc != NULL && thrd->req[1].desc != NULL;
}
static inline bool is_manager(struct pl330_thread *thrd)
{
- struct pl330_dmac *pl330 = thrd->dmac;
-
- /* MANAGER is indexed at the end */
- if (thrd->id == pl330->pinfo->pcfg.num_chan)
- return true;
- else
- return false;
+ return thrd->dmac->manager == thrd;
}
/* If manager of the thread is in Non-Secure mode */
static inline bool _manager_ns(struct pl330_thread *thrd)
{
- struct pl330_dmac *pl330 = thrd->dmac;
-
- return (pl330->pinfo->pcfg.mode & DMAC_MODE_NS) ? true : false;
+ return (thrd->dmac->pcfg.mode & DMAC_MODE_NS) ? true : false;
}
static inline u32 get_revision(u32 periph_id)
@@ -1004,7 +891,7 @@ static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
/* Returns Time-Out */
static bool _until_dmac_idle(struct pl330_thread *thrd)
{
- void __iomem *regs = thrd->dmac->pinfo->base;
+ void __iomem *regs = thrd->dmac->base;
unsigned long loops = msecs_to_loops(5);
do {
@@ -1024,7 +911,7 @@ static bool _until_dmac_idle(struct pl330_thread *thrd)
static inline void _execute_DBGINSN(struct pl330_thread *thrd,
u8 insn[], bool as_manager)
{
- void __iomem *regs = thrd->dmac->pinfo->base;
+ void __iomem *regs = thrd->dmac->base;
u32 val;
val = (insn[0] << 16) | (insn[1] << 24);
@@ -1039,7 +926,7 @@ static inline void _execute_DBGINSN(struct pl330_thread *thrd,
/* If timed out due to halted state-machine */
if (_until_dmac_idle(thrd)) {
- dev_err(thrd->dmac->pinfo->dev, "DMAC halted!\n");
+ dev_err(thrd->dmac->ddma.dev, "DMAC halted!\n");
return;
}
@@ -1047,25 +934,9 @@ static inline void _execute_DBGINSN(struct pl330_thread *thrd,
writel(0, regs + DBGCMD);
}
-/*
- * Mark a _pl330_req as free.
- * We do it by writing DMAEND as the first instruction
- * because no valid request is going to have DMAEND as
- * its first instruction to execute.
- */
-static void mark_free(struct pl330_thread *thrd, int idx)
-{
- struct _pl330_req *req = &thrd->req[idx];
-
- _emit_END(0, req->mc_cpu);
- req->mc_len = 0;
-
- thrd->req_running = -1;
-}
-
static inline u32 _state(struct pl330_thread *thrd)
{
- void __iomem *regs = thrd->dmac->pinfo->base;
+ void __iomem *regs = thrd->dmac->base;
u32 val;
if (is_manager(thrd))
@@ -1123,7 +994,7 @@ static inline u32 _state(struct pl330_thread *thrd)
static void _stop(struct pl330_thread *thrd)
{
- void __iomem *regs = thrd->dmac->pinfo->base;
+ void __iomem *regs = thrd->dmac->base;
u8 insn[6] = {0, 0, 0, 0, 0, 0};
if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
@@ -1146,9 +1017,9 @@ static void _stop(struct pl330_thread *thrd)
/* Start doing req 'idx' of thread 'thrd' */
static bool _trigger(struct pl330_thread *thrd)
{
- void __iomem *regs = thrd->dmac->pinfo->base;
+ void __iomem *regs = thrd->dmac->base;
struct _pl330_req *req;
- struct pl330_req *r;
+ struct dma_pl330_desc *desc;
struct _arg_GO go;
unsigned ns;
u8 insn[6] = {0, 0, 0, 0, 0, 0};
@@ -1159,32 +1030,27 @@ static bool _trigger(struct pl330_thread *thrd)
return true;
idx = 1 - thrd->lstenq;
- if (!IS_FREE(&thrd->req[idx]))
+ if (thrd->req[idx].desc != NULL) {
req = &thrd->req[idx];
- else {
+ } else {
idx = thrd->lstenq;
- if (!IS_FREE(&thrd->req[idx]))
+ if (thrd->req[idx].desc != NULL)
req = &thrd->req[idx];
else
req = NULL;
}
/* Return if no request */
- if (!req || !req->r)
+ if (!req)
return true;
- r = req->r;
+ desc = req->desc;
- if (r->cfg)
- ns = r->cfg->nonsecure ? 1 : 0;
- else if (readl(regs + CS(thrd->id)) & CS_CNS)
- ns = 1;
- else
- ns = 0;
+ ns = desc->rqcfg.nonsecure ? 1 : 0;
/* See 'Abort Sources' point-4 at Page 2-25 */
if (_manager_ns(thrd) && !ns)
- dev_info(thrd->dmac->pinfo->dev, "%s:%d Recipe for ABORT!\n",
+ dev_info(thrd->dmac->ddma.dev, "%s:%d Recipe for ABORT!\n",
__func__, __LINE__);
go.chan = thrd->id;
@@ -1240,7 +1106,7 @@ static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
const struct _xfer_spec *pxs, int cyc)
{
int off = 0;
- struct pl330_config *pcfg = pxs->r->cfg->pcfg;
+ struct pl330_config *pcfg = pxs->desc->rqcfg.pcfg;
/* check lock-up free version */
if (get_revision(pcfg->periph_id) >= PERIPH_REV_R1P0) {
@@ -1266,10 +1132,10 @@ static inline int _ldst_devtomem(unsigned dry_run, u8 buf[],
int off = 0;
while (cyc--) {
- off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
- off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+ off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->desc->peri);
+ off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->desc->peri);
off += _emit_ST(dry_run, &buf[off], ALWAYS);
- off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
+ off += _emit_FLUSHP(dry_run, &buf[off], pxs->desc->peri);
}
return off;
@@ -1281,10 +1147,10 @@ static inline int _ldst_memtodev(unsigned dry_run, u8 buf[],
int off = 0;
while (cyc--) {
- off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+ off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->desc->peri);
off += _emit_LD(dry_run, &buf[off], ALWAYS);
- off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->r->peri);
- off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
+ off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->desc->peri);
+ off += _emit_FLUSHP(dry_run, &buf[off], pxs->desc->peri);
}
return off;
@@ -1295,14 +1161,14 @@ static int _bursts(unsigned dry_run, u8 buf[],
{
int off = 0;
- switch (pxs->r->rqtype) {
- case MEMTODEV:
+ switch (pxs->desc->rqtype) {
+ case DMA_MEM_TO_DEV:
off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc);
break;
- case DEVTOMEM:
+ case DMA_DEV_TO_MEM:
off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc);
break;
- case MEMTOMEM:
+ case DMA_MEM_TO_MEM:
off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
break;
default:
@@ -1395,7 +1261,7 @@ static inline int _loop(unsigned dry_run, u8 buf[],
static inline int _setup_loops(unsigned dry_run, u8 buf[],
const struct _xfer_spec *pxs)
{
- struct pl330_xfer *x = pxs->x;
+ struct pl330_xfer *x = &pxs->desc->px;
u32 ccr = pxs->ccr;
unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
int off = 0;
@@ -1412,7 +1278,7 @@ static inline int _setup_loops(unsigned dry_run, u8 buf[],
static inline int _setup_xfer(unsigned dry_run, u8 buf[],
const struct _xfer_spec *pxs)
{
- struct pl330_xfer *x = pxs->x;
+ struct pl330_xfer *x = &pxs->desc->px;
int off = 0;
/* DMAMOV SAR, x->src_addr */
@@ -1443,17 +1309,12 @@ static int _setup_req(unsigned dry_run, struct pl330_thread *thrd,
/* DMAMOV CCR, ccr */
off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
- x = pxs->r->x;
- do {
- /* Error if xfer length is not aligned at burst size */
- if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr)))
- return -EINVAL;
-
- pxs->x = x;
- off += _setup_xfer(dry_run, &buf[off], pxs);
+ x = &pxs->desc->px;
+ /* Error if xfer length is not aligned at burst size */
+ if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr)))
+ return -EINVAL;
- x = x->next;
- } while (x);
+ off += _setup_xfer(dry_run, &buf[off], pxs);
/* DMASEV peripheral/event */
off += _emit_SEV(dry_run, &buf[off], thrd->ev);
@@ -1495,31 +1356,15 @@ static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
return ccr;
}
-static inline bool _is_valid(u32 ccr)
-{
- enum pl330_dstcachectrl dcctl;
- enum pl330_srccachectrl scctl;
-
- dcctl = (ccr >> CC_DSTCCTRL_SHFT) & CC_DRCCCTRL_MASK;
- scctl = (ccr >> CC_SRCCCTRL_SHFT) & CC_SRCCCTRL_MASK;
-
- if (dcctl == DINVALID1 || dcctl == DINVALID2
- || scctl == SINVALID1 || scctl == SINVALID2)
- return false;
- else
- return true;
-}
-
/*
* Submit a list of xfers after which the client wants notification.
* Client is not notified after each xfer unit, just once after all
* xfer units are done or some error occurs.
*/
-static int pl330_submit_req(void *ch_id, struct pl330_req *r)
+static int pl330_submit_req(struct pl330_thread *thrd,
+ struct dma_pl330_desc *desc)
{
- struct pl330_thread *thrd = ch_id;
- struct pl330_dmac *pl330;
- struct pl330_info *pi;
+ struct pl330_dmac *pl330 = thrd->dmac;
struct _xfer_spec xs;
unsigned long flags;
void __iomem *regs;
@@ -1528,25 +1373,24 @@ static int pl330_submit_req(void *ch_id, struct pl330_req *r)
int ret = 0;
/* No Req or Unacquired Channel or DMAC */
- if (!r || !thrd || thrd->free)
+ if (!desc || !thrd || thrd->free)
return -EINVAL;
- pl330 = thrd->dmac;
- pi = pl330->pinfo;
- regs = pi->base;
+ regs = thrd->dmac->base;
if (pl330->state == DYING
|| pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
- dev_info(thrd->dmac->pinfo->dev, "%s:%d\n",
+ dev_info(thrd->dmac->ddma.dev, "%s:%d\n",
__func__, __LINE__);
return -EAGAIN;
}
/* If request for non-existing peripheral */
- if (r->rqtype != MEMTOMEM && r->peri >= pi->pcfg.num_peri) {
- dev_info(thrd->dmac->pinfo->dev,
+ if (desc->rqtype != DMA_MEM_TO_MEM &&
+ desc->peri >= pl330->pcfg.num_peri) {
+ dev_info(thrd->dmac->ddma.dev,
"%s:%d Invalid peripheral(%u)!\n",
- __func__, __LINE__, r->peri);
+ __func__, __LINE__, desc->peri);
return -EINVAL;
}
@@ -1557,41 +1401,26 @@ static int pl330_submit_req(void *ch_id, struct pl330_req *r)
goto xfer_exit;
}
+ /* Prefer Secure Channel */
+ if (!_manager_ns(thrd))
+ desc->rqcfg.nonsecure = 0;
+ else
+ desc->rqcfg.nonsecure = 1;
- /* Use last settings, if not provided */
- if (r->cfg) {
- /* Prefer Secure Channel */
- if (!_manager_ns(thrd))
- r->cfg->nonsecure = 0;
- else
- r->cfg->nonsecure = 1;
-
- ccr = _prepare_ccr(r->cfg);
- } else {
- ccr = readl(regs + CC(thrd->id));
- }
-
- /* If this req doesn't have valid xfer settings */
- if (!_is_valid(ccr)) {
- ret = -EINVAL;
- dev_info(thrd->dmac->pinfo->dev, "%s:%d Invalid CCR(%x)!\n",
- __func__, __LINE__, ccr);
- goto xfer_exit;
- }
+ ccr = _prepare_ccr(&desc->rqcfg);
- idx = IS_FREE(&thrd->req[0]) ? 0 : 1;
+ idx = thrd->req[0].desc == NULL ? 0 : 1;
xs.ccr = ccr;
- xs.r = r;
+ xs.desc = desc;
/* First dry run to check if req is acceptable */
ret = _setup_req(1, thrd, idx, &xs);
if (ret < 0)
goto xfer_exit;
- if (ret > pi->mcbufsz / 2) {
- dev_info(thrd->dmac->pinfo->dev,
- "%s:%d Trying increasing mcbufsz\n",
+ if (ret > pl330->mcbufsz / 2) {
+ dev_info(pl330->ddma.dev, "%s:%d Trying increasing mcbufsz\n",
__func__, __LINE__);
ret = -ENOMEM;
goto xfer_exit;
@@ -1599,8 +1428,8 @@ static int pl330_submit_req(void *ch_id, struct pl330_req *r)
/* Hook the request */
thrd->lstenq = idx;
- thrd->req[idx].mc_len = _setup_req(0, thrd, idx, &xs);
- thrd->req[idx].r = r;
+ thrd->req[idx].desc = desc;
+ _setup_req(0, thrd, idx, &xs);
ret = 0;
@@ -1610,10 +1439,32 @@ xfer_exit:
return ret;
}
+static void dma_pl330_rqcb(struct dma_pl330_desc *desc, enum pl330_op_err err)
+{
+ struct dma_pl330_chan *pch;
+ unsigned long flags;
+
+ if (!desc)
+ return;
+
+ pch = desc->pchan;
+
+ /* If desc aborted */
+ if (!pch)
+ return;
+
+ spin_lock_irqsave(&pch->lock, flags);
+
+ desc->status = DONE;
+
+ spin_unlock_irqrestore(&pch->lock, flags);
+
+ tasklet_schedule(&pch->task);
+}
+
static void pl330_dotask(unsigned long data)
{
struct pl330_dmac *pl330 = (struct pl330_dmac *) data;
- struct pl330_info *pi = pl330->pinfo;
unsigned long flags;
int i;
@@ -1631,16 +1482,16 @@ static void pl330_dotask(unsigned long data)
if (pl330->dmac_tbd.reset_mngr) {
_stop(pl330->manager);
/* Reset all channels */
- pl330->dmac_tbd.reset_chan = (1 << pi->pcfg.num_chan) - 1;
+ pl330->dmac_tbd.reset_chan = (1 << pl330->pcfg.num_chan) - 1;
/* Clear the reset flag */
pl330->dmac_tbd.reset_mngr = false;
}
- for (i = 0; i < pi->pcfg.num_chan; i++) {
+ for (i = 0; i < pl330->pcfg.num_chan; i++) {
if (pl330->dmac_tbd.reset_chan & (1 << i)) {
struct pl330_thread *thrd = &pl330->channels[i];
- void __iomem *regs = pi->base;
+ void __iomem *regs = pl330->base;
enum pl330_op_err err;
_stop(thrd);
@@ -1651,16 +1502,13 @@ static void pl330_dotask(unsigned long data)
err = PL330_ERR_ABORT;
spin_unlock_irqrestore(&pl330->lock, flags);
-
- _callback(thrd->req[1 - thrd->lstenq].r, err);
- _callback(thrd->req[thrd->lstenq].r, err);
-
+ dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, err);
+ dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, err);
spin_lock_irqsave(&pl330->lock, flags);
- thrd->req[0].r = NULL;
- thrd->req[1].r = NULL;
- mark_free(thrd, 0);
- mark_free(thrd, 1);
+ thrd->req[0].desc = NULL;
+ thrd->req[1].desc = NULL;
+ thrd->req_running = -1;
/* Clear the reset flag */
pl330->dmac_tbd.reset_chan &= ~(1 << i);
@@ -1673,20 +1521,15 @@ static void pl330_dotask(unsigned long data)
}
/* Returns 1 if state was updated, 0 otherwise */
-static int pl330_update(const struct pl330_info *pi)
+static int pl330_update(struct pl330_dmac *pl330)
{
- struct pl330_req *rqdone, *tmp;
- struct pl330_dmac *pl330;
+ struct dma_pl330_desc *descdone, *tmp;
unsigned long flags;
void __iomem *regs;
u32 val;
int id, ev, ret = 0;
- if (!pi || !pi->pl330_data)
- return 0;
-
- regs = pi->base;
- pl330 = pi->pl330_data;
+ regs = pl330->base;
spin_lock_irqsave(&pl330->lock, flags);
@@ -1696,13 +1539,13 @@ static int pl330_update(const struct pl330_info *pi)
else
pl330->dmac_tbd.reset_mngr = false;
- val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1);
+ val = readl(regs + FSC) & ((1 << pl330->pcfg.num_chan) - 1);
pl330->dmac_tbd.reset_chan |= val;
if (val) {
int i = 0;
- while (i < pi->pcfg.num_chan) {
+ while (i < pl330->pcfg.num_chan) {
if (val & (1 << i)) {
- dev_info(pi->dev,
+ dev_info(pl330->ddma.dev,
"Reset Channel-%d\t CS-%x FTC-%x\n",
i, readl(regs + CS(i)),
readl(regs + FTC(i)));
@@ -1714,15 +1557,16 @@ static int pl330_update(const struct pl330_info *pi)
/* Check which event happened i.e, thread notified */
val = readl(regs + ES);
- if (pi->pcfg.num_events < 32
- && val & ~((1 << pi->pcfg.num_events) - 1)) {
+ if (pl330->pcfg.num_events < 32
+ && val & ~((1 << pl330->pcfg.num_events) - 1)) {
pl330->dmac_tbd.reset_dmac = true;
- dev_err(pi->dev, "%s:%d Unexpected!\n", __func__, __LINE__);
+ dev_err(pl330->ddma.dev, "%s:%d Unexpected!\n", __func__,
+ __LINE__);
ret = 1;
goto updt_exit;
}
- for (ev = 0; ev < pi->pcfg.num_events; ev++) {
+ for (ev = 0; ev < pl330->pcfg.num_events; ev++) {
if (val & (1 << ev)) { /* Event occurred */
struct pl330_thread *thrd;
u32 inten = readl(regs + INTEN);
@@ -1743,25 +1587,22 @@ static int pl330_update(const struct pl330_info *pi)
continue;
/* Detach the req */
- rqdone = thrd->req[active].r;
- thrd->req[active].r = NULL;
-
- mark_free(thrd, active);
+ descdone = thrd->req[active].desc;
+ thrd->req[active].desc = NULL;
/* Get going again ASAP */
_start(thrd);
/* For now, just make a list of callbacks to be done */
- list_add_tail(&rqdone->rqd, &pl330->req_done);
+ list_add_tail(&descdone->rqd, &pl330->req_done);
}
}
/* Now that we are in no hurry, do the callbacks */
- list_for_each_entry_safe(rqdone, tmp, &pl330->req_done, rqd) {
- list_del(&rqdone->rqd);
-
+ list_for_each_entry_safe(descdone, tmp, &pl330->req_done, rqd) {
+ list_del(&descdone->rqd);
spin_unlock_irqrestore(&pl330->lock, flags);
- _callback(rqdone, PL330_ERR_NONE);
+ dma_pl330_rqcb(descdone, PL330_ERR_NONE);
spin_lock_irqsave(&pl330->lock, flags);
}
@@ -1778,65 +1619,13 @@ updt_exit:
return ret;
}
-static int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
-{
- struct pl330_thread *thrd = ch_id;
- struct pl330_dmac *pl330;
- unsigned long flags;
- int ret = 0, active;
-
- if (!thrd || thrd->free || thrd->dmac->state == DYING)
- return -EINVAL;
-
- pl330 = thrd->dmac;
- active = thrd->req_running;
-
- spin_lock_irqsave(&pl330->lock, flags);
-
- switch (op) {
- case PL330_OP_FLUSH:
- /* Make sure the channel is stopped */
- _stop(thrd);
-
- thrd->req[0].r = NULL;
- thrd->req[1].r = NULL;
- mark_free(thrd, 0);
- mark_free(thrd, 1);
- break;
-
- case PL330_OP_ABORT:
- /* Make sure the channel is stopped */
- _stop(thrd);
-
- /* ABORT is only for the active req */
- if (active == -1)
- break;
-
- thrd->req[active].r = NULL;
- mark_free(thrd, active);
-
- /* Start the next */
- case PL330_OP_START:
- if ((active == -1) && !_start(thrd))
- ret = -EIO;
- break;
-
- default:
- ret = -EINVAL;
- }
-
- spin_unlock_irqrestore(&pl330->lock, flags);
- return ret;
-}
-
/* Reserve an event */
static inline int _alloc_event(struct pl330_thread *thrd)
{
struct pl330_dmac *pl330 = thrd->dmac;
- struct pl330_info *pi = pl330->pinfo;
int ev;
- for (ev = 0; ev < pi->pcfg.num_events; ev++)
+ for (ev = 0; ev < pl330->pcfg.num_events; ev++)
if (pl330->events[ev] == -1) {
pl330->events[ev] = thrd->id;
return ev;
@@ -1845,45 +1634,38 @@ static inline int _alloc_event(struct pl330_thread *thrd)
return -1;
}
-static bool _chan_ns(const struct pl330_info *pi, int i)
+static bool _chan_ns(const struct pl330_dmac *pl330, int i)
{
- return pi->pcfg.irq_ns & (1 << i);
+ return pl330->pcfg.irq_ns & (1 << i);
}
/* Upon success, returns IdentityToken for the
* allocated channel, NULL otherwise.
*/
-static void *pl330_request_channel(const struct pl330_info *pi)
+static struct pl330_thread *pl330_request_channel(struct pl330_dmac *pl330)
{
struct pl330_thread *thrd = NULL;
- struct pl330_dmac *pl330;
unsigned long flags;
int chans, i;
- if (!pi || !pi->pl330_data)
- return NULL;
-
- pl330 = pi->pl330_data;
-
if (pl330->state == DYING)
return NULL;
- chans = pi->pcfg.num_chan;
+ chans = pl330->pcfg.num_chan;
spin_lock_irqsave(&pl330->lock, flags);
for (i = 0; i < chans; i++) {
thrd = &pl330->channels[i];
if ((thrd->free) && (!_manager_ns(thrd) ||
- _chan_ns(pi, i))) {
+ _chan_ns(pl330, i))) {
thrd->ev = _alloc_event(thrd);
if (thrd->ev >= 0) {
thrd->free = false;
thrd->lstenq = 1;
- thrd->req[0].r = NULL;
- mark_free(thrd, 0);
- thrd->req[1].r = NULL;
- mark_free(thrd, 1);
+ thrd->req[0].desc = NULL;
+ thrd->req[1].desc = NULL;
+ thrd->req_running = -1;
break;
}
}
@@ -1899,17 +1681,15 @@ static void *pl330_request_channel(const struct pl330_info *pi)
static inline void _free_event(struct pl330_thread *thrd, int ev)
{
struct pl330_dmac *pl330 = thrd->dmac;
- struct pl330_info *pi = pl330->pinfo;
/* If the event is valid and was held by the thread */
- if (ev >= 0 && ev < pi->pcfg.num_events
+ if (ev >= 0 && ev < pl330->pcfg.num_events
&& pl330->events[ev] == thrd->id)
pl330->events[ev] = -1;
}
-static void pl330_release_channel(void *ch_id)
+static void pl330_release_channel(struct pl330_thread *thrd)
{
- struct pl330_thread *thrd = ch_id;
struct pl330_dmac *pl330;
unsigned long flags;
@@ -1918,8 +1698,8 @@ static void pl330_release_channel(void *ch_id)
_stop(thrd);
- _callback(thrd->req[1 - thrd->lstenq].r, PL330_ERR_ABORT);
- _callback(thrd->req[thrd->lstenq].r, PL330_ERR_ABORT);
+ dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, PL330_ERR_ABORT);
+ dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, PL330_ERR_ABORT);
pl330 = thrd->dmac;
@@ -1932,72 +1712,70 @@ static void pl330_release_channel(void *ch_id)
/* Initialize the structure for PL330 configuration, that can be used
* by the client driver the make best use of the DMAC
*/
-static void read_dmac_config(struct pl330_info *pi)
+static void read_dmac_config(struct pl330_dmac *pl330)
{
- void __iomem *regs = pi->base;
+ void __iomem *regs = pl330->base;
u32 val;
val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
val &= CRD_DATA_WIDTH_MASK;
- pi->pcfg.data_bus_width = 8 * (1 << val);
+ pl330->pcfg.data_bus_width = 8 * (1 << val);
val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
val &= CRD_DATA_BUFF_MASK;
- pi->pcfg.data_buf_dep = val + 1;
+ pl330->pcfg.data_buf_dep = val + 1;
val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
val &= CR0_NUM_CHANS_MASK;
val += 1;
- pi->pcfg.num_chan = val;
+ pl330->pcfg.num_chan = val;
val = readl(regs + CR0);
if (val & CR0_PERIPH_REQ_SET) {
val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
val += 1;
- pi->pcfg.num_peri = val;
- pi->pcfg.peri_ns = readl(regs + CR4);
+ pl330->pcfg.num_peri = val;
+ pl330->pcfg.peri_ns = readl(regs + CR4);
} else {
- pi->pcfg.num_peri = 0;
+ pl330->pcfg.num_peri = 0;
}
val = readl(regs + CR0);
if (val & CR0_BOOT_MAN_NS)
- pi->pcfg.mode |= DMAC_MODE_NS;
+ pl330->pcfg.mode |= DMAC_MODE_NS;
else
- pi->pcfg.mode &= ~DMAC_MODE_NS;
+ pl330->pcfg.mode &= ~DMAC_MODE_NS;
val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
val &= CR0_NUM_EVENTS_MASK;
val += 1;
- pi->pcfg.num_events = val;
+ pl330->pcfg.num_events = val;
- pi->pcfg.irq_ns = readl(regs + CR3);
+ pl330->pcfg.irq_ns = readl(regs + CR3);
}
static inline void _reset_thread(struct pl330_thread *thrd)
{
struct pl330_dmac *pl330 = thrd->dmac;
- struct pl330_info *pi = pl330->pinfo;
thrd->req[0].mc_cpu = pl330->mcode_cpu
- + (thrd->id * pi->mcbufsz);
+ + (thrd->id * pl330->mcbufsz);
thrd->req[0].mc_bus = pl330->mcode_bus
- + (thrd->id * pi->mcbufsz);
- thrd->req[0].r = NULL;
- mark_free(thrd, 0);
+ + (thrd->id * pl330->mcbufsz);
+ thrd->req[0].desc = NULL;
thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
- + pi->mcbufsz / 2;
+ + pl330->mcbufsz / 2;
thrd->req[1].mc_bus = thrd->req[0].mc_bus
- + pi->mcbufsz / 2;
- thrd->req[1].r = NULL;
- mark_free(thrd, 1);
+ + pl330->mcbufsz / 2;
+ thrd->req[1].desc = NULL;
+
+ thrd->req_running = -1;
}
static int dmac_alloc_threads(struct pl330_dmac *pl330)
{
- struct pl330_info *pi = pl330->pinfo;
- int chans = pi->pcfg.num_chan;
+ int chans = pl330->pcfg.num_chan;
struct pl330_thread *thrd;
int i;
@@ -2028,29 +1806,28 @@ static int dmac_alloc_threads(struct pl330_dmac *pl330)
static int dmac_alloc_resources(struct pl330_dmac *pl330)
{
- struct pl330_info *pi = pl330->pinfo;
- int chans = pi->pcfg.num_chan;
+ int chans = pl330->pcfg.num_chan;
int ret;
/*
* Alloc MicroCode buffer for 'chans' Channel threads.
* A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
*/
- pl330->mcode_cpu = dma_alloc_coherent(pi->dev,
- chans * pi->mcbufsz,
+ pl330->mcode_cpu = dma_alloc_coherent(pl330->ddma.dev,
+ chans * pl330->mcbufsz,
&pl330->mcode_bus, GFP_KERNEL);
if (!pl330->mcode_cpu) {
- dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
+ dev_err(pl330->ddma.dev, "%s:%d Can't allocate memory!\n",
__func__, __LINE__);
return -ENOMEM;
}
ret = dmac_alloc_threads(pl330);
if (ret) {
- dev_err(pi->dev, "%s:%d Can't to create channels for DMAC!\n",
+ dev_err(pl330->ddma.dev, "%s:%d Can't to create channels for DMAC!\n",
__func__, __LINE__);
- dma_free_coherent(pi->dev,
- chans * pi->mcbufsz,
+ dma_free_coherent(pl330->ddma.dev,
+ chans * pl330->mcbufsz,
pl330->mcode_cpu, pl330->mcode_bus);
return ret;
}
@@ -2058,71 +1835,45 @@ static int dmac_alloc_resources(struct pl330_dmac *pl330)
return 0;
}
-static int pl330_add(struct pl330_info *pi)
+static int pl330_add(struct pl330_dmac *pl330)
{
- struct pl330_dmac *pl330;
void __iomem *regs;
int i, ret;
- if (!pi || !pi->dev)
- return -EINVAL;
-
- /* If already added */
- if (pi->pl330_data)
- return -EINVAL;
-
- /*
- * If the SoC can perform reset on the DMAC, then do it
- * before reading its configuration.
- */
- if (pi->dmac_reset)
- pi->dmac_reset(pi);
-
- regs = pi->base;
+ regs = pl330->base;
/* Check if we can handle this DMAC */
- if ((pi->pcfg.periph_id & 0xfffff) != PERIPH_ID_VAL) {
- dev_err(pi->dev, "PERIPH_ID 0x%x !\n", pi->pcfg.periph_id);
+ if ((pl330->pcfg.periph_id & 0xfffff) != PERIPH_ID_VAL) {
+ dev_err(pl330->ddma.dev, "PERIPH_ID 0x%x !\n",
+ pl330->pcfg.periph_id);
return -EINVAL;
}
/* Read the configuration of the DMAC */
- read_dmac_config(pi);
+ read_dmac_config(pl330);
- if (pi->pcfg.num_events == 0) {
- dev_err(pi->dev, "%s:%d Can't work without events!\n",
+ if (pl330->pcfg.num_events == 0) {
+ dev_err(pl330->ddma.dev, "%s:%d Can't work without events!\n",
__func__, __LINE__);
return -EINVAL;
}
- pl330 = kzalloc(sizeof(*pl330), GFP_KERNEL);
- if (!pl330) {
- dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
- __func__, __LINE__);
- return -ENOMEM;
- }
-
- /* Assign the info structure and private data */
- pl330->pinfo = pi;
- pi->pl330_data = pl330;
-
spin_lock_init(&pl330->lock);
INIT_LIST_HEAD(&pl330->req_done);
/* Use default MC buffer size if not provided */
- if (!pi->mcbufsz)
- pi->mcbufsz = MCODE_BUFF_PER_REQ * 2;
+ if (!pl330->mcbufsz)
+ pl330->mcbufsz = MCODE_BUFF_PER_REQ * 2;
/* Mark all events as free */
- for (i = 0; i < pi->pcfg.num_events; i++)
+ for (i = 0; i < pl330->pcfg.num_events; i++)
pl330->events[i] = -1;
/* Allocate resources needed by the DMAC */
ret = dmac_alloc_resources(pl330);
if (ret) {
- dev_err(pi->dev, "Unable to create channels for DMAC\n");
- kfree(pl330);
+ dev_err(pl330->ddma.dev, "Unable to create channels for DMAC\n");
return ret;
}
@@ -2135,15 +1886,13 @@ static int pl330_add(struct pl330_info *pi)
static int dmac_free_threads(struct pl330_dmac *pl330)
{
- struct pl330_info *pi = pl330->pinfo;
- int chans = pi->pcfg.num_chan;
struct pl330_thread *thrd;
int i;
/* Release Channel threads */
- for (i = 0; i < chans; i++) {
+ for (i = 0; i < pl330->pcfg.num_chan; i++) {
thrd = &pl330->channels[i];
- pl330_release_channel((void *)thrd);
+ pl330_release_channel(thrd);
}
/* Free memory */
@@ -2152,35 +1901,18 @@ static int dmac_free_threads(struct pl330_dmac *pl330)
return 0;
}
-static void dmac_free_resources(struct pl330_dmac *pl330)
+static void pl330_del(struct pl330_dmac *pl330)
{
- struct pl330_info *pi = pl330->pinfo;
- int chans = pi->pcfg.num_chan;
-
- dmac_free_threads(pl330);
-
- dma_free_coherent(pi->dev, chans * pi->mcbufsz,
- pl330->mcode_cpu, pl330->mcode_bus);
-}
-
-static void pl330_del(struct pl330_info *pi)
-{
- struct pl330_dmac *pl330;
-
- if (!pi || !pi->pl330_data)
- return;
-
- pl330 = pi->pl330_data;
-
pl330->state = UNINIT;
tasklet_kill(&pl330->tasks);
/* Free DMAC resources */
- dmac_free_resources(pl330);
+ dmac_free_threads(pl330);
- kfree(pl330);
- pi->pl330_data = NULL;
+ dma_free_coherent(pl330->ddma.dev,
+ pl330->pcfg.num_chan * pl330->mcbufsz, pl330->mcode_cpu,
+ pl330->mcode_bus);
}
/* forward declaration */
@@ -2212,8 +1944,7 @@ static inline void fill_queue(struct dma_pl330_chan *pch)
if (desc->status == BUSY)
continue;
- ret = pl330_submit_req(pch->pl330_chid,
- &desc->req);
+ ret = pl330_submit_req(pch->thread, desc);
if (!ret) {
desc->status = BUSY;
} else if (ret == -EAGAIN) {
@@ -2222,7 +1953,7 @@ static inline void fill_queue(struct dma_pl330_chan *pch)
} else {
/* Unacceptable request */
desc->status = DONE;
- dev_err(pch->dmac->pif.dev, "%s:%d Bad Desc(%d)\n",
+ dev_err(pch->dmac->ddma.dev, "%s:%d Bad Desc(%d)\n",
__func__, __LINE__, desc->txd.cookie);
tasklet_schedule(&pch->task);
}
@@ -2249,7 +1980,9 @@ static void pl330_tasklet(unsigned long data)
fill_queue(pch);
/* Make sure the PL330 Channel thread is active */
- pl330_chan_ctrl(pch->pl330_chid, PL330_OP_START);
+ spin_lock(&pch->thread->dmac->lock);
+ _start(pch->thread);
+ spin_unlock(&pch->thread->dmac->lock);
while (!list_empty(&pch->completed_list)) {
dma_async_tx_callback callback;
@@ -2280,25 +2013,6 @@ static void pl330_tasklet(unsigned long data)
spin_unlock_irqrestore(&pch->lock, flags);
}
-static void dma_pl330_rqcb(void *token, enum pl330_op_err err)
-{
- struct dma_pl330_desc *desc = token;
- struct dma_pl330_chan *pch = desc->pchan;
- unsigned long flags;
-
- /* If desc aborted */
- if (!pch)
- return;
-
- spin_lock_irqsave(&pch->lock, flags);
-
- desc->status = DONE;
-
- spin_unlock_irqrestore(&pch->lock, flags);
-
- tasklet_schedule(&pch->task);
-}
-
bool pl330_filter(struct dma_chan *chan, void *param)
{
u8 *peri_id;
@@ -2315,23 +2029,26 @@ static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec,
struct of_dma *ofdma)
{
int count = dma_spec->args_count;
- struct dma_pl330_dmac *pdmac = ofdma->of_dma_data;
+ struct pl330_dmac *pl330 = ofdma->of_dma_data;
unsigned int chan_id;
+ if (!pl330)
+ return NULL;
+
if (count != 1)
return NULL;
chan_id = dma_spec->args[0];
- if (chan_id >= pdmac->num_peripherals)
+ if (chan_id >= pl330->num_peripherals)
return NULL;
- return dma_get_slave_channel(&pdmac->peripherals[chan_id].chan);
+ return dma_get_slave_channel(&pl330->peripherals[chan_id].chan);
}
static int pl330_alloc_chan_resources(struct dma_chan *chan)
{
struct dma_pl330_chan *pch = to_pchan(chan);
- struct dma_pl330_dmac *pdmac = pch->dmac;
+ struct pl330_dmac *pl330 = pch->dmac;
unsigned long flags;
spin_lock_irqsave(&pch->lock, flags);
@@ -2339,8 +2056,8 @@ static int pl330_alloc_chan_resources(struct dma_chan *chan)
dma_cookie_init(chan);
pch->cyclic = false;
- pch->pl330_chid = pl330_request_channel(&pdmac->pif);
- if (!pch->pl330_chid) {
+ pch->thread = pl330_request_channel(pl330);
+ if (!pch->thread) {
spin_unlock_irqrestore(&pch->lock, flags);
return -ENOMEM;
}
@@ -2357,7 +2074,7 @@ static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned
struct dma_pl330_chan *pch = to_pchan(chan);
struct dma_pl330_desc *desc;
unsigned long flags;
- struct dma_pl330_dmac *pdmac = pch->dmac;
+ struct pl330_dmac *pl330 = pch->dmac;
struct dma_slave_config *slave_config;
LIST_HEAD(list);
@@ -2365,8 +2082,13 @@ static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned
case DMA_TERMINATE_ALL:
spin_lock_irqsave(&pch->lock, flags);
- /* FLUSH the PL330 Channel thread */
- pl330_chan_ctrl(pch->pl330_chid, PL330_OP_FLUSH);
+ spin_lock(&pl330->lock);
+ _stop(pch->thread);
+ spin_unlock(&pl330->lock);
+
+ pch->thread->req[0].desc = NULL;
+ pch->thread->req[1].desc = NULL;
+ pch->thread->req_running = -1;
/* Mark all desc done */
list_for_each_entry(desc, &pch->submitted_list, node) {
@@ -2384,9 +2106,9 @@ static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned
dma_cookie_complete(&desc->txd);
}
- list_splice_tail_init(&pch->submitted_list, &pdmac->desc_pool);
- list_splice_tail_init(&pch->work_list, &pdmac->desc_pool);
- list_splice_tail_init(&pch->completed_list, &pdmac->desc_pool);
+ list_splice_tail_init(&pch->submitted_list, &pl330->desc_pool);
+ list_splice_tail_init(&pch->work_list, &pl330->desc_pool);
+ list_splice_tail_init(&pch->completed_list, &pl330->desc_pool);
spin_unlock_irqrestore(&pch->lock, flags);
break;
case DMA_SLAVE_CONFIG:
@@ -2409,7 +2131,7 @@ static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned
}
break;
default:
- dev_err(pch->dmac->pif.dev, "Not supported command.\n");
+ dev_err(pch->dmac->ddma.dev, "Not supported command.\n");
return -ENXIO;
}
@@ -2425,8 +2147,8 @@ static void pl330_free_chan_resources(struct dma_chan *chan)
spin_lock_irqsave(&pch->lock, flags);
- pl330_release_channel(pch->pl330_chid);
- pch->pl330_chid = NULL;
+ pl330_release_channel(pch->thread);
+ pch->thread = NULL;
if (pch->cyclic)
list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool);
@@ -2489,57 +2211,46 @@ static dma_cookie_t pl330_tx_submit(struct dma_async_tx_descriptor *tx)
static inline void _init_desc(struct dma_pl330_desc *desc)
{
- desc->req.x = &desc->px;
- desc->req.token = desc;
desc->rqcfg.swap = SWAP_NO;
- desc->rqcfg.scctl = SCCTRL0;
- desc->rqcfg.dcctl = DCCTRL0;
- desc->req.cfg = &desc->rqcfg;
- desc->req.xfer_cb = dma_pl330_rqcb;
+ desc->rqcfg.scctl = CCTRL0;
+ desc->rqcfg.dcctl = CCTRL0;
desc->txd.tx_submit = pl330_tx_submit;
INIT_LIST_HEAD(&desc->node);
}
/* Returns the number of descriptors added to the DMAC pool */
-static int add_desc(struct dma_pl330_dmac *pdmac, gfp_t flg, int count)
+static int add_desc(struct pl330_dmac *pl330, gfp_t flg, int count)
{
struct dma_pl330_desc *desc;
unsigned long flags;
int i;
- if (!pdmac)
- return 0;
-
desc = kcalloc(count, sizeof(*desc), flg);
if (!desc)
return 0;
- spin_lock_irqsave(&pdmac->pool_lock, flags);
+ spin_lock_irqsave(&pl330->pool_lock, flags);
for (i = 0; i < count; i++) {
_init_desc(&desc[i]);
- list_add_tail(&desc[i].node, &pdmac->desc_pool);
+ list_add_tail(&desc[i].node, &pl330->desc_pool);
}
- spin_unlock_irqrestore(&pdmac->pool_lock, flags);
+ spin_unlock_irqrestore(&pl330->pool_lock, flags);
return count;
}
-static struct dma_pl330_desc *
-pluck_desc(struct dma_pl330_dmac *pdmac)
+static struct dma_pl330_desc *pluck_desc(struct pl330_dmac *pl330)
{
struct dma_pl330_desc *desc = NULL;
unsigned long flags;
- if (!pdmac)
- return NULL;
-
- spin_lock_irqsave(&pdmac->pool_lock, flags);
+ spin_lock_irqsave(&pl330->pool_lock, flags);
- if (!list_empty(&pdmac->desc_pool)) {
- desc = list_entry(pdmac->desc_pool.next,
+ if (!list_empty(&pl330->desc_pool)) {
+ desc = list_entry(pl330->desc_pool.next,
struct dma_pl330_desc, node);
list_del_init(&desc->node);
@@ -2548,29 +2259,29 @@ pluck_desc(struct dma_pl330_dmac *pdmac)
desc->txd.callback = NULL;
}
- spin_unlock_irqrestore(&pdmac->pool_lock, flags);
+ spin_unlock_irqrestore(&pl330->pool_lock, flags);
return desc;
}
static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
{
- struct dma_pl330_dmac *pdmac = pch->dmac;
+ struct pl330_dmac *pl330 = pch->dmac;
u8 *peri_id = pch->chan.private;
struct dma_pl330_desc *desc;
/* Pluck one desc from the pool of DMAC */
- desc = pluck_desc(pdmac);
+ desc = pluck_desc(pl330);
/* If the DMAC pool is empty, alloc new */
if (!desc) {
- if (!add_desc(pdmac, GFP_ATOMIC, 1))
+ if (!add_desc(pl330, GFP_ATOMIC, 1))
return NULL;
/* Try again */
- desc = pluck_desc(pdmac);
+ desc = pluck_desc(pl330);
if (!desc) {
- dev_err(pch->dmac->pif.dev,
+ dev_err(pch->dmac->ddma.dev,
"%s:%d ALERT!\n", __func__, __LINE__);
return NULL;
}
@@ -2581,8 +2292,8 @@ static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
desc->txd.cookie = 0;
async_tx_ack(&desc->txd);
- desc->req.peri = peri_id ? pch->chan.chan_id : 0;
- desc->rqcfg.pcfg = &pch->dmac->pif.pcfg;
+ desc->peri = peri_id ? pch->chan.chan_id : 0;
+ desc->rqcfg.pcfg = &pch->dmac->pcfg;
dma_async_tx_descriptor_init(&desc->txd, &pch->chan);
@@ -2592,7 +2303,6 @@ static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
static inline void fill_px(struct pl330_xfer *px,
dma_addr_t dst, dma_addr_t src, size_t len)
{
- px->next = NULL;
px->bytes = len;
px->dst_addr = dst;
px->src_addr = src;
@@ -2605,7 +2315,7 @@ __pl330_prep_dma_memcpy(struct dma_pl330_chan *pch, dma_addr_t dst,
struct dma_pl330_desc *desc = pl330_get_desc(pch);
if (!desc) {
- dev_err(pch->dmac->pif.dev, "%s:%d Unable to fetch desc\n",
+ dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
__func__, __LINE__);
return NULL;
}
@@ -2629,11 +2339,11 @@ __pl330_prep_dma_memcpy(struct dma_pl330_chan *pch, dma_addr_t dst,
static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len)
{
struct dma_pl330_chan *pch = desc->pchan;
- struct pl330_info *pi = &pch->dmac->pif;
+ struct pl330_dmac *pl330 = pch->dmac;
int burst_len;
- burst_len = pi->pcfg.data_bus_width / 8;
- burst_len *= pi->pcfg.data_buf_dep;
+ burst_len = pl330->pcfg.data_bus_width / 8;
+ burst_len *= pl330->pcfg.data_buf_dep;
burst_len >>= desc->rqcfg.brst_size;
/* src/dst_burst_len can't be more than 16 */
@@ -2652,11 +2362,11 @@ static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len)
static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
struct dma_chan *chan, dma_addr_t dma_addr, size_t len,
size_t period_len, enum dma_transfer_direction direction,
- unsigned long flags, void *context)
+ unsigned long flags)
{
struct dma_pl330_desc *desc = NULL, *first = NULL;
struct dma_pl330_chan *pch = to_pchan(chan);
- struct dma_pl330_dmac *pdmac = pch->dmac;
+ struct pl330_dmac *pl330 = pch->dmac;
unsigned int i;
dma_addr_t dst;
dma_addr_t src;
@@ -2665,7 +2375,7 @@ static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
return NULL;
if (!is_slave_direction(direction)) {
- dev_err(pch->dmac->pif.dev, "%s:%d Invalid dma direction\n",
+ dev_err(pch->dmac->ddma.dev, "%s:%d Invalid dma direction\n",
__func__, __LINE__);
return NULL;
}
@@ -2673,23 +2383,23 @@ static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
for (i = 0; i < len / period_len; i++) {
desc = pl330_get_desc(pch);
if (!desc) {
- dev_err(pch->dmac->pif.dev, "%s:%d Unable to fetch desc\n",
+ dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
__func__, __LINE__);
if (!first)
return NULL;
- spin_lock_irqsave(&pdmac->pool_lock, flags);
+ spin_lock_irqsave(&pl330->pool_lock, flags);
while (!list_empty(&first->node)) {
desc = list_entry(first->node.next,
struct dma_pl330_desc, node);
- list_move_tail(&desc->node, &pdmac->desc_pool);
+ list_move_tail(&desc->node, &pl330->desc_pool);
}
- list_move_tail(&first->node, &pdmac->desc_pool);
+ list_move_tail(&first->node, &pl330->desc_pool);
- spin_unlock_irqrestore(&pdmac->pool_lock, flags);
+ spin_unlock_irqrestore(&pl330->pool_lock, flags);
return NULL;
}
@@ -2698,14 +2408,12 @@ static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
case DMA_MEM_TO_DEV:
desc->rqcfg.src_inc = 1;
desc->rqcfg.dst_inc = 0;
- desc->req.rqtype = MEMTODEV;
src = dma_addr;
dst = pch->fifo_addr;
break;
case DMA_DEV_TO_MEM:
desc->rqcfg.src_inc = 0;
desc->rqcfg.dst_inc = 1;
- desc->req.rqtype = DEVTOMEM;
src = pch->fifo_addr;
dst = dma_addr;
break;
@@ -2713,6 +2421,7 @@ static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
break;
}
+ desc->rqtype = direction;
desc->rqcfg.brst_size = pch->burst_sz;
desc->rqcfg.brst_len = 1;
fill_px(&desc->px, dst, src, period_len);
@@ -2740,24 +2449,22 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
{
struct dma_pl330_desc *desc;
struct dma_pl330_chan *pch = to_pchan(chan);
- struct pl330_info *pi;
+ struct pl330_dmac *pl330 = pch->dmac;
int burst;
if (unlikely(!pch || !len))
return NULL;
- pi = &pch->dmac->pif;
-
desc = __pl330_prep_dma_memcpy(pch, dst, src, len);
if (!desc)
return NULL;
desc->rqcfg.src_inc = 1;
desc->rqcfg.dst_inc = 1;
- desc->req.rqtype = MEMTOMEM;
+ desc->rqtype = DMA_MEM_TO_MEM;
/* Select max possible burst size */
- burst = pi->pcfg.data_bus_width / 8;
+ burst = pl330->pcfg.data_bus_width / 8;
while (burst > 1) {
if (!(len % burst))
@@ -2776,7 +2483,7 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
return &desc->txd;
}
-static void __pl330_giveback_desc(struct dma_pl330_dmac *pdmac,
+static void __pl330_giveback_desc(struct pl330_dmac *pl330,
struct dma_pl330_desc *first)
{
unsigned long flags;
@@ -2785,17 +2492,17 @@ static void __pl330_giveback_desc(struct dma_pl330_dmac *pdmac,
if (!first)
return;
- spin_lock_irqsave(&pdmac->pool_lock, flags);
+ spin_lock_irqsave(&pl330->pool_lock, flags);
while (!list_empty(&first->node)) {
desc = list_entry(first->node.next,
struct dma_pl330_desc, node);
- list_move_tail(&desc->node, &pdmac->desc_pool);
+ list_move_tail(&desc->node, &pl330->desc_pool);
}
- list_move_tail(&first->node, &pdmac->desc_pool);
+ list_move_tail(&first->node, &pl330->desc_pool);
- spin_unlock_irqrestore(&pdmac->pool_lock, flags);
+ spin_unlock_irqrestore(&pl330->pool_lock, flags);
}
static struct dma_async_tx_descriptor *
@@ -2820,12 +2527,12 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
desc = pl330_get_desc(pch);
if (!desc) {
- struct dma_pl330_dmac *pdmac = pch->dmac;
+ struct pl330_dmac *pl330 = pch->dmac;
- dev_err(pch->dmac->pif.dev,
+ dev_err(pch->dmac->ddma.dev,
"%s:%d Unable to fetch desc\n",
__func__, __LINE__);
- __pl330_giveback_desc(pdmac, first);
+ __pl330_giveback_desc(pl330, first);
return NULL;
}
@@ -2838,19 +2545,18 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
if (direction == DMA_MEM_TO_DEV) {
desc->rqcfg.src_inc = 1;
desc->rqcfg.dst_inc = 0;
- desc->req.rqtype = MEMTODEV;
fill_px(&desc->px,
addr, sg_dma_address(sg), sg_dma_len(sg));
} else {
desc->rqcfg.src_inc = 0;
desc->rqcfg.dst_inc = 1;
- desc->req.rqtype = DEVTOMEM;
fill_px(&desc->px,
sg_dma_address(sg), addr, sg_dma_len(sg));
}
desc->rqcfg.brst_size = pch->burst_sz;
desc->rqcfg.brst_len = 1;
+ desc->rqtype = direction;
}
/* Return the last desc in the chain */
@@ -2890,9 +2596,9 @@ static int
pl330_probe(struct amba_device *adev, const struct amba_id *id)
{
struct dma_pl330_platdata *pdat;
- struct dma_pl330_dmac *pdmac;
+ struct pl330_config *pcfg;
+ struct pl330_dmac *pl330;
struct dma_pl330_chan *pch, *_p;
- struct pl330_info *pi;
struct dma_device *pd;
struct resource *res;
int i, ret, irq;
@@ -2905,30 +2611,27 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
return ret;
/* Allocate a new DMAC and its Channels */
- pdmac = devm_kzalloc(&adev->dev, sizeof(*pdmac), GFP_KERNEL);
- if (!pdmac) {
+ pl330 = devm_kzalloc(&adev->dev, sizeof(*pl330), GFP_KERNEL);
+ if (!pl330) {
dev_err(&adev->dev, "unable to allocate mem\n");
return -ENOMEM;
}
- pi = &pdmac->pif;
- pi->dev = &adev->dev;
- pi->pl330_data = NULL;
- pi->mcbufsz = pdat ? pdat->mcbuf_sz : 0;
+ pl330->mcbufsz = pdat ? pdat->mcbuf_sz : 0;
res = &adev->res;
- pi->base = devm_ioremap_resource(&adev->dev, res);
- if (IS_ERR(pi->base))
- return PTR_ERR(pi->base);
+ pl330->base = devm_ioremap_resource(&adev->dev, res);
+ if (IS_ERR(pl330->base))
+ return PTR_ERR(pl330->base);
- amba_set_drvdata(adev, pdmac);
+ amba_set_drvdata(adev, pl330);
for (i = 0; i < AMBA_NR_IRQS; i++) {
irq = adev->irq[i];
if (irq) {
ret = devm_request_irq(&adev->dev, irq,
pl330_irq_handler, 0,
- dev_name(&adev->dev), pi);
+ dev_name(&adev->dev), pl330);
if (ret)
return ret;
} else {
@@ -2936,38 +2639,40 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
}
}
- pi->pcfg.periph_id = adev->periphid;
- ret = pl330_add(pi);
+ pcfg = &pl330->pcfg;
+
+ pcfg->periph_id = adev->periphid;
+ ret = pl330_add(pl330);
if (ret)
return ret;
- INIT_LIST_HEAD(&pdmac->desc_pool);
- spin_lock_init(&pdmac->pool_lock);
+ INIT_LIST_HEAD(&pl330->desc_pool);
+ spin_lock_init(&pl330->pool_lock);
/* Create a descriptor pool of default size */
- if (!add_desc(pdmac, GFP_KERNEL, NR_DEFAULT_DESC))
+ if (!add_desc(pl330, GFP_KERNEL, NR_DEFAULT_DESC))
dev_warn(&adev->dev, "unable to allocate desc\n");
- pd = &pdmac->ddma;
+ pd = &pl330->ddma;
INIT_LIST_HEAD(&pd->channels);
/* Initialize channel parameters */
if (pdat)
- num_chan = max_t(int, pdat->nr_valid_peri, pi->pcfg.num_chan);
+ num_chan = max_t(int, pdat->nr_valid_peri, pcfg->num_chan);
else
- num_chan = max_t(int, pi->pcfg.num_peri, pi->pcfg.num_chan);
+ num_chan = max_t(int, pcfg->num_peri, pcfg->num_chan);
- pdmac->num_peripherals = num_chan;
+ pl330->num_peripherals = num_chan;
- pdmac->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL);
- if (!pdmac->peripherals) {
+ pl330->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL);
+ if (!pl330->peripherals) {
ret = -ENOMEM;
- dev_err(&adev->dev, "unable to allocate pdmac->peripherals\n");
+ dev_err(&adev->dev, "unable to allocate pl330->peripherals\n");
goto probe_err2;
}
for (i = 0; i < num_chan; i++) {
- pch = &pdmac->peripherals[i];
+ pch = &pl330->peripherals[i];
if (!adev->dev.of_node)
pch->chan.private = pdat ? &pdat->peri_id[i] : NULL;
else
@@ -2977,9 +2682,9 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
INIT_LIST_HEAD(&pch->work_list);
INIT_LIST_HEAD(&pch->completed_list);
spin_lock_init(&pch->lock);
- pch->pl330_chid = NULL;
+ pch->thread = NULL;
pch->chan.device = pd;
- pch->dmac = pdmac;
+ pch->dmac = pl330;
/* Add the channel to the DMAC list */
list_add_tail(&pch->chan.device_node, &pd->channels);
@@ -2990,7 +2695,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
pd->cap_mask = pdat->cap_mask;
} else {
dma_cap_set(DMA_MEMCPY, pd->cap_mask);
- if (pi->pcfg.num_peri) {
+ if (pcfg->num_peri) {
dma_cap_set(DMA_SLAVE, pd->cap_mask);
dma_cap_set(DMA_CYCLIC, pd->cap_mask);
dma_cap_set(DMA_PRIVATE, pd->cap_mask);
@@ -3015,14 +2720,14 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
if (adev->dev.of_node) {
ret = of_dma_controller_register(adev->dev.of_node,
- of_dma_pl330_xlate, pdmac);
+ of_dma_pl330_xlate, pl330);
if (ret) {
dev_err(&adev->dev,
"unable to register DMA to the generic DT DMA helpers\n");
}
}
- adev->dev.dma_parms = &pdmac->dma_parms;
+ adev->dev.dma_parms = &pl330->dma_parms;
/*
* This is the limit for transfers with a buswidth of 1, larger
@@ -3037,14 +2742,13 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
"Loaded driver for PL330 DMAC-%d\n", adev->periphid);
dev_info(&adev->dev,
"\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
- pi->pcfg.data_buf_dep,
- pi->pcfg.data_bus_width / 8, pi->pcfg.num_chan,
- pi->pcfg.num_peri, pi->pcfg.num_events);
+ pcfg->data_buf_dep, pcfg->data_bus_width / 8, pcfg->num_chan,
+ pcfg->num_peri, pcfg->num_events);
return 0;
probe_err3:
/* Idle the DMAC */
- list_for_each_entry_safe(pch, _p, &pdmac->ddma.channels,
+ list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
chan.device_node) {
/* Remove the channel */
@@ -3055,27 +2759,23 @@ probe_err3:
pl330_free_chan_resources(&pch->chan);
}
probe_err2:
- pl330_del(pi);
+ pl330_del(pl330);
return ret;
}
static int pl330_remove(struct amba_device *adev)
{
- struct dma_pl330_dmac *pdmac = amba_get_drvdata(adev);
+ struct pl330_dmac *pl330 = amba_get_drvdata(adev);
struct dma_pl330_chan *pch, *_p;
- struct pl330_info *pi;
-
- if (!pdmac)
- return 0;
if (adev->dev.of_node)
of_dma_controller_free(adev->dev.of_node);
- dma_async_device_unregister(&pdmac->ddma);
+ dma_async_device_unregister(&pl330->ddma);
/* Idle the DMAC */
- list_for_each_entry_safe(pch, _p, &pdmac->ddma.channels,
+ list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
chan.device_node) {
/* Remove the channel */
@@ -3086,9 +2786,7 @@ static int pl330_remove(struct amba_device *adev)
pl330_free_chan_resources(&pch->chan);
}
- pi = &pdmac->pif;
-
- pl330_del(pi);
+ pl330_del(pl330);
return 0;
}
diff --git a/drivers/dma/qcom_bam_dma.c b/drivers/dma/qcom_bam_dma.c
index 82c923146e49..7a4bbb0f80a5 100644
--- a/drivers/dma/qcom_bam_dma.c
+++ b/drivers/dma/qcom_bam_dma.c
@@ -61,12 +61,17 @@ struct bam_desc_hw {
#define DESC_FLAG_INT BIT(15)
#define DESC_FLAG_EOT BIT(14)
#define DESC_FLAG_EOB BIT(13)
+#define DESC_FLAG_NWD BIT(12)
struct bam_async_desc {
struct virt_dma_desc vd;
u32 num_desc;
u32 xfer_len;
+
+ /* transaction flags, EOT|EOB|NWD */
+ u16 flags;
+
struct bam_desc_hw *curr_desc;
enum dma_transfer_direction dir;
@@ -490,6 +495,14 @@ static struct dma_async_tx_descriptor *bam_prep_slave_sg(struct dma_chan *chan,
if (!async_desc)
goto err_out;
+ if (flags & DMA_PREP_FENCE)
+ async_desc->flags |= DESC_FLAG_NWD;
+
+ if (flags & DMA_PREP_INTERRUPT)
+ async_desc->flags |= DESC_FLAG_EOT;
+ else
+ async_desc->flags |= DESC_FLAG_INT;
+
async_desc->num_desc = num_alloc;
async_desc->curr_desc = async_desc->desc;
async_desc->dir = direction;
@@ -793,8 +806,11 @@ static void bam_start_dma(struct bam_chan *bchan)
else
async_desc->xfer_len = async_desc->num_desc;
- /* set INT on last descriptor */
- desc[async_desc->xfer_len - 1].flags |= DESC_FLAG_INT;
+ /* set any special flags on the last descriptor */
+ if (async_desc->num_desc == async_desc->xfer_len)
+ desc[async_desc->xfer_len - 1].flags = async_desc->flags;
+ else
+ desc[async_desc->xfer_len - 1].flags |= DESC_FLAG_INT;
if (bchan->tail + async_desc->xfer_len > MAX_DESCRIPTORS) {
u32 partial = MAX_DESCRIPTORS - bchan->tail;
diff --git a/drivers/dma/s3c24xx-dma.c b/drivers/dma/s3c24xx-dma.c
index 012520c9fd79..7416572d1e40 100644
--- a/drivers/dma/s3c24xx-dma.c
+++ b/drivers/dma/s3c24xx-dma.c
@@ -889,8 +889,7 @@ static struct dma_async_tx_descriptor *s3c24xx_dma_prep_memcpy(
static struct dma_async_tx_descriptor *s3c24xx_dma_prep_dma_cyclic(
struct dma_chan *chan, dma_addr_t addr, size_t size, size_t period,
- enum dma_transfer_direction direction, unsigned long flags,
- void *context)
+ enum dma_transfer_direction direction, unsigned long flags)
{
struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
diff --git a/drivers/dma/sa11x0-dma.c b/drivers/dma/sa11x0-dma.c
index 5ebdfbc1051e..4b0ef043729a 100644
--- a/drivers/dma/sa11x0-dma.c
+++ b/drivers/dma/sa11x0-dma.c
@@ -612,7 +612,7 @@ static struct dma_async_tx_descriptor *sa11x0_dma_prep_slave_sg(
static struct dma_async_tx_descriptor *sa11x0_dma_prep_dma_cyclic(
struct dma_chan *chan, dma_addr_t addr, size_t size, size_t period,
- enum dma_transfer_direction dir, unsigned long flags, void *context)
+ enum dma_transfer_direction dir, unsigned long flags)
{
struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan);
struct sa11x0_dma_desc *txd;
diff --git a/drivers/dma/sh/Kconfig b/drivers/dma/sh/Kconfig
index 0f719816c91b..0349125a2e20 100644
--- a/drivers/dma/sh/Kconfig
+++ b/drivers/dma/sh/Kconfig
@@ -2,21 +2,39 @@
# DMA engine configuration for sh
#
+#
+# DMA Engine Helpers
+#
+
config SH_DMAE_BASE
bool "Renesas SuperH DMA Engine support"
- depends on (SUPERH && SH_DMA) || ARCH_SHMOBILE || COMPILE_TEST
+ depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
+ depends on !SUPERH || SH_DMA
depends on !SH_DMA_API
default y
select DMA_ENGINE
help
Enable support for the Renesas SuperH DMA controllers.
+#
+# DMA Controllers
+#
+
config SH_DMAE
tristate "Renesas SuperH DMAC support"
depends on SH_DMAE_BASE
help
Enable support for the Renesas SuperH DMA controllers.
+if SH_DMAE
+
+config SH_DMAE_R8A73A4
+ def_bool y
+ depends on ARCH_R8A73A4
+ depends on OF
+
+endif
+
config SUDMAC
tristate "Renesas SUDMAC support"
depends on SH_DMAE_BASE
@@ -34,7 +52,3 @@ config RCAR_AUDMAC_PP
depends on SH_DMAE_BASE
help
Enable support for the Renesas R-Car Audio DMAC Peripheral Peripheral controllers.
-
-config SHDMA_R8A73A4
- def_bool y
- depends on ARCH_R8A73A4 && SH_DMAE != n
diff --git a/drivers/dma/sh/Makefile b/drivers/dma/sh/Makefile
index 1ce88b28cfc6..0a5cfdb76e45 100644
--- a/drivers/dma/sh/Makefile
+++ b/drivers/dma/sh/Makefile
@@ -1,10 +1,18 @@
+#
+# DMA Engine Helpers
+#
+
obj-$(CONFIG_SH_DMAE_BASE) += shdma-base.o shdma-of.o
-obj-$(CONFIG_SH_DMAE) += shdma.o
+
+#
+# DMA Controllers
+#
+
shdma-y := shdmac.o
-ifeq ($(CONFIG_OF),y)
-shdma-$(CONFIG_SHDMA_R8A73A4) += shdma-r8a73a4.o
-endif
+shdma-$(CONFIG_SH_DMAE_R8A73A4) += shdma-r8a73a4.o
shdma-objs := $(shdma-y)
+obj-$(CONFIG_SH_DMAE) += shdma.o
+
obj-$(CONFIG_SUDMAC) += sudmac.o
obj-$(CONFIG_RCAR_HPB_DMAE) += rcar-hpbdma.o
obj-$(CONFIG_RCAR_AUDMAC_PP) += rcar-audmapp.o
diff --git a/drivers/dma/sh/rcar-audmapp.c b/drivers/dma/sh/rcar-audmapp.c
index 2de77289a2e9..dabbf0aba2e9 100644
--- a/drivers/dma/sh/rcar-audmapp.c
+++ b/drivers/dma/sh/rcar-audmapp.c
@@ -22,6 +22,7 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/dmaengine.h>
+#include <linux/of_dma.h>
#include <linux/platform_data/dma-rcar-audmapp.h>
#include <linux/platform_device.h>
#include <linux/shdma-base.h>
@@ -45,8 +46,9 @@
struct audmapp_chan {
struct shdma_chan shdma_chan;
- struct audmapp_slave_config *config;
void __iomem *base;
+ dma_addr_t slave_addr;
+ u32 chcr;
};
struct audmapp_device {
@@ -56,7 +58,16 @@ struct audmapp_device {
void __iomem *chan_reg;
};
+struct audmapp_desc {
+ struct shdma_desc shdma_desc;
+ dma_addr_t src;
+ dma_addr_t dst;
+};
+
+#define to_shdma_chan(c) container_of(c, struct shdma_chan, dma_chan)
+
#define to_chan(chan) container_of(chan, struct audmapp_chan, shdma_chan)
+#define to_desc(sdesc) container_of(sdesc, struct audmapp_desc, shdma_desc)
#define to_dev(chan) container_of(chan->shdma_chan.dma_chan.device, \
struct audmapp_device, shdma_dev.dma_dev)
@@ -90,70 +101,82 @@ static void audmapp_halt(struct shdma_chan *schan)
}
static void audmapp_start_xfer(struct shdma_chan *schan,
- struct shdma_desc *sdecs)
+ struct shdma_desc *sdesc)
{
struct audmapp_chan *auchan = to_chan(schan);
struct audmapp_device *audev = to_dev(auchan);
- struct audmapp_slave_config *cfg = auchan->config;
+ struct audmapp_desc *desc = to_desc(sdesc);
struct device *dev = audev->dev;
- u32 chcr = cfg->chcr | PDMACHCR_DE;
+ u32 chcr = auchan->chcr | PDMACHCR_DE;
- dev_dbg(dev, "src/dst/chcr = %pad/%pad/%x\n",
- &cfg->src, &cfg->dst, cfg->chcr);
+ dev_dbg(dev, "src/dst/chcr = %pad/%pad/%08x\n",
+ &desc->src, &desc->dst, chcr);
- audmapp_write(auchan, cfg->src, PDMASAR);
- audmapp_write(auchan, cfg->dst, PDMADAR);
+ audmapp_write(auchan, desc->src, PDMASAR);
+ audmapp_write(auchan, desc->dst, PDMADAR);
audmapp_write(auchan, chcr, PDMACHCR);
}
-static struct audmapp_slave_config *
-audmapp_find_slave(struct audmapp_chan *auchan, int slave_id)
+static void audmapp_get_config(struct audmapp_chan *auchan, int slave_id,
+ u32 *chcr, dma_addr_t *dst)
{
struct audmapp_device *audev = to_dev(auchan);
struct audmapp_pdata *pdata = audev->pdata;
struct audmapp_slave_config *cfg;
int i;
+ *chcr = 0;
+ *dst = 0;
+
+ if (!pdata) { /* DT */
+ *chcr = ((u32)slave_id) << 16;
+ auchan->shdma_chan.slave_id = (slave_id) >> 8;
+ return;
+ }
+
+ /* non-DT */
+
if (slave_id >= AUDMAPP_SLAVE_NUMBER)
- return NULL;
+ return;
for (i = 0, cfg = pdata->slave; i < pdata->slave_num; i++, cfg++)
- if (cfg->slave_id == slave_id)
- return cfg;
-
- return NULL;
+ if (cfg->slave_id == slave_id) {
+ *chcr = cfg->chcr;
+ *dst = cfg->dst;
+ break;
+ }
}
static int audmapp_set_slave(struct shdma_chan *schan, int slave_id,
dma_addr_t slave_addr, bool try)
{
struct audmapp_chan *auchan = to_chan(schan);
- struct audmapp_slave_config *cfg =
- audmapp_find_slave(auchan, slave_id);
+ u32 chcr;
+ dma_addr_t dst;
+
+ audmapp_get_config(auchan, slave_id, &chcr, &dst);
- if (!cfg)
- return -ENODEV;
if (try)
return 0;
- auchan->config = cfg;
+ auchan->chcr = chcr;
+ auchan->slave_addr = slave_addr ? : dst;
return 0;
}
static int audmapp_desc_setup(struct shdma_chan *schan,
- struct shdma_desc *sdecs,
+ struct shdma_desc *sdesc,
dma_addr_t src, dma_addr_t dst, size_t *len)
{
- struct audmapp_chan *auchan = to_chan(schan);
- struct audmapp_slave_config *cfg = auchan->config;
-
- if (!cfg)
- return -ENODEV;
+ struct audmapp_desc *desc = to_desc(sdesc);
if (*len > (size_t)AUDMAPP_LEN_MAX)
*len = (size_t)AUDMAPP_LEN_MAX;
+ desc->src = src;
+ desc->dst = dst;
+
return 0;
}
@@ -164,7 +187,9 @@ static void audmapp_setup_xfer(struct shdma_chan *schan,
static dma_addr_t audmapp_slave_addr(struct shdma_chan *schan)
{
- return 0; /* always fixed address */
+ struct audmapp_chan *auchan = to_chan(schan);
+
+ return auchan->slave_addr;
}
static bool audmapp_channel_busy(struct shdma_chan *schan)
@@ -183,7 +208,7 @@ static bool audmapp_desc_completed(struct shdma_chan *schan,
static struct shdma_desc *audmapp_embedded_desc(void *buf, int i)
{
- return &((struct shdma_desc *)buf)[i];
+ return &((struct audmapp_desc *)buf)[i].shdma_desc;
}
static const struct shdma_ops audmapp_shdma_ops = {
@@ -234,16 +259,39 @@ static void audmapp_chan_remove(struct audmapp_device *audev)
dma_dev->chancnt = 0;
}
+static struct dma_chan *audmapp_of_xlate(struct of_phandle_args *dma_spec,
+ struct of_dma *ofdma)
+{
+ dma_cap_mask_t mask;
+ struct dma_chan *chan;
+ u32 chcr = dma_spec->args[0];
+
+ if (dma_spec->args_count != 1)
+ return NULL;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ chan = dma_request_channel(mask, shdma_chan_filter, NULL);
+ if (chan)
+ to_shdma_chan(chan)->hw_req = chcr;
+
+ return chan;
+}
+
static int audmapp_probe(struct platform_device *pdev)
{
struct audmapp_pdata *pdata = pdev->dev.platform_data;
+ struct device_node *np = pdev->dev.of_node;
struct audmapp_device *audev;
struct shdma_dev *sdev;
struct dma_device *dma_dev;
struct resource *res;
int err, i;
- if (!pdata)
+ if (np)
+ of_dma_controller_register(np, audmapp_of_xlate, pdev);
+ else if (!pdata)
return -ENODEV;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -260,7 +308,7 @@ static int audmapp_probe(struct platform_device *pdev)
sdev = &audev->shdma_dev;
sdev->ops = &audmapp_shdma_ops;
- sdev->desc_size = sizeof(struct shdma_desc);
+ sdev->desc_size = sizeof(struct audmapp_desc);
dma_dev = &sdev->dma_dev;
dma_dev->copy_align = LOG2_DEFAULT_XFER_SIZE;
@@ -305,12 +353,18 @@ static int audmapp_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id audmapp_of_match[] = {
+ { .compatible = "renesas,rcar-audmapp", },
+ {},
+};
+
static struct platform_driver audmapp_driver = {
.probe = audmapp_probe,
.remove = audmapp_remove,
.driver = {
.owner = THIS_MODULE,
.name = "rcar-audmapp-engine",
+ .of_match_table = audmapp_of_match,
},
};
module_platform_driver(audmapp_driver);
diff --git a/drivers/dma/sh/shdma-arm.h b/drivers/dma/sh/shdma-arm.h
index a2b8258426c9..a1b0ef45d6a2 100644
--- a/drivers/dma/sh/shdma-arm.h
+++ b/drivers/dma/sh/shdma-arm.h
@@ -45,7 +45,7 @@ enum {
((((i) & TS_LOW_BIT) << TS_LOW_SHIFT) |\
(((i) & TS_HI_BIT) << TS_HI_SHIFT))
-#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL((xmit_sz)))
-#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL((xmit_sz)))
+#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL((xmit_sz)))
+#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL((xmit_sz)))
#endif
diff --git a/drivers/dma/sh/shdma-base.c b/drivers/dma/sh/shdma-base.c
index b35007e21e6b..42d497416196 100644
--- a/drivers/dma/sh/shdma-base.c
+++ b/drivers/dma/sh/shdma-base.c
@@ -206,45 +206,6 @@ static int shdma_setup_slave(struct shdma_chan *schan, int slave_id,
return 0;
}
-/*
- * This is the standard shdma filter function to be used as a replacement to the
- * "old" method, using the .private pointer. If for some reason you allocate a
- * channel without slave data, use something like ERR_PTR(-EINVAL) as a filter
- * parameter. If this filter is used, the slave driver, after calling
- * dma_request_channel(), will also have to call dmaengine_slave_config() with
- * .slave_id, .direction, and either .src_addr or .dst_addr set.
- * NOTE: this filter doesn't support multiple DMAC drivers with the DMA_SLAVE
- * capability! If this becomes a requirement, hardware glue drivers, using this
- * services would have to provide their own filters, which first would check
- * the device driver, similar to how other DMAC drivers, e.g., sa11x0-dma.c, do
- * this, and only then, in case of a match, call this common filter.
- * NOTE 2: This filter function is also used in the DT case by shdma_of_xlate().
- * In that case the MID-RID value is used for slave channel filtering and is
- * passed to this function in the "arg" parameter.
- */
-bool shdma_chan_filter(struct dma_chan *chan, void *arg)
-{
- struct shdma_chan *schan = to_shdma_chan(chan);
- struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
- const struct shdma_ops *ops = sdev->ops;
- int match = (long)arg;
- int ret;
-
- if (match < 0)
- /* No slave requested - arbitrary channel */
- return true;
-
- if (!schan->dev->of_node && match >= slave_num)
- return false;
-
- ret = ops->set_slave(schan, match, 0, true);
- if (ret < 0)
- return false;
-
- return true;
-}
-EXPORT_SYMBOL(shdma_chan_filter);
-
static int shdma_alloc_chan_resources(struct dma_chan *chan)
{
struct shdma_chan *schan = to_shdma_chan(chan);
@@ -295,6 +256,51 @@ esetslave:
return ret;
}
+/*
+ * This is the standard shdma filter function to be used as a replacement to the
+ * "old" method, using the .private pointer. If for some reason you allocate a
+ * channel without slave data, use something like ERR_PTR(-EINVAL) as a filter
+ * parameter. If this filter is used, the slave driver, after calling
+ * dma_request_channel(), will also have to call dmaengine_slave_config() with
+ * .slave_id, .direction, and either .src_addr or .dst_addr set.
+ * NOTE: this filter doesn't support multiple DMAC drivers with the DMA_SLAVE
+ * capability! If this becomes a requirement, hardware glue drivers, using this
+ * services would have to provide their own filters, which first would check
+ * the device driver, similar to how other DMAC drivers, e.g., sa11x0-dma.c, do
+ * this, and only then, in case of a match, call this common filter.
+ * NOTE 2: This filter function is also used in the DT case by shdma_of_xlate().
+ * In that case the MID-RID value is used for slave channel filtering and is
+ * passed to this function in the "arg" parameter.
+ */
+bool shdma_chan_filter(struct dma_chan *chan, void *arg)
+{
+ struct shdma_chan *schan;
+ struct shdma_dev *sdev;
+ int match = (long)arg;
+ int ret;
+
+ /* Only support channels handled by this driver. */
+ if (chan->device->device_alloc_chan_resources !=
+ shdma_alloc_chan_resources)
+ return false;
+
+ if (match < 0)
+ /* No slave requested - arbitrary channel */
+ return true;
+
+ schan = to_shdma_chan(chan);
+ if (!schan->dev->of_node && match >= slave_num)
+ return false;
+
+ sdev = to_shdma_dev(schan->dma_chan.device);
+ ret = sdev->ops->set_slave(schan, match, 0, true);
+ if (ret < 0)
+ return false;
+
+ return true;
+}
+EXPORT_SYMBOL(shdma_chan_filter);
+
static dma_async_tx_callback __ld_cleanup(struct shdma_chan *schan, bool all)
{
struct shdma_desc *desc, *_desc;
@@ -662,15 +668,16 @@ static struct dma_async_tx_descriptor *shdma_prep_slave_sg(
static struct dma_async_tx_descriptor *shdma_prep_dma_cyclic(
struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
size_t period_len, enum dma_transfer_direction direction,
- unsigned long flags, void *context)
+ unsigned long flags)
{
struct shdma_chan *schan = to_shdma_chan(chan);
struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
+ struct dma_async_tx_descriptor *desc;
const struct shdma_ops *ops = sdev->ops;
unsigned int sg_len = buf_len / period_len;
int slave_id = schan->slave_id;
dma_addr_t slave_addr;
- struct scatterlist sgl[SHDMA_MAX_SG_LEN];
+ struct scatterlist *sgl;
int i;
if (!chan)
@@ -694,7 +701,16 @@ static struct dma_async_tx_descriptor *shdma_prep_dma_cyclic(
slave_addr = ops->slave_addr(schan);
+ /*
+ * Allocate the sg list dynamically as it would consumer too much stack
+ * space.
+ */
+ sgl = kcalloc(sg_len, sizeof(*sgl), GFP_KERNEL);
+ if (!sgl)
+ return NULL;
+
sg_init_table(sgl, sg_len);
+
for (i = 0; i < sg_len; i++) {
dma_addr_t src = buf_addr + (period_len * i);
@@ -704,8 +720,11 @@ static struct dma_async_tx_descriptor *shdma_prep_dma_cyclic(
sg_dma_len(&sgl[i]) = period_len;
}
- return shdma_prep_sg(schan, sgl, sg_len, &slave_addr,
+ desc = shdma_prep_sg(schan, sgl, sg_len, &slave_addr,
direction, flags, true);
+
+ kfree(sgl);
+ return desc;
}
static int shdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
diff --git a/drivers/dma/sh/shdma.h b/drivers/dma/sh/shdma.h
index 758a57b51875..2c0a969adc9f 100644
--- a/drivers/dma/sh/shdma.h
+++ b/drivers/dma/sh/shdma.h
@@ -62,7 +62,7 @@ struct sh_dmae_desc {
#define to_sh_dev(chan) container_of(chan->shdma_chan.dma_chan.device,\
struct sh_dmae_device, shdma_dev.dma_dev)
-#ifdef CONFIG_SHDMA_R8A73A4
+#ifdef CONFIG_SH_DMAE_R8A73A4
extern const struct sh_dmae_pdata r8a73a4_dma_pdata;
#define r8a73a4_shdma_devid (&r8a73a4_dma_pdata)
#else
diff --git a/drivers/dma/sh/shdmac.c b/drivers/dma/sh/shdmac.c
index 146d5df926db..58eb85770eba 100644
--- a/drivers/dma/sh/shdmac.c
+++ b/drivers/dma/sh/shdmac.c
@@ -38,12 +38,12 @@
#include "../dmaengine.h"
#include "shdma.h"
-/* DMA register */
-#define SAR 0x00
-#define DAR 0x04
-#define TCR 0x08
-#define CHCR 0x0C
-#define DMAOR 0x40
+/* DMA registers */
+#define SAR 0x00 /* Source Address Register */
+#define DAR 0x04 /* Destination Address Register */
+#define TCR 0x08 /* Transfer Count Register */
+#define CHCR 0x0C /* Channel Control Register */
+#define DMAOR 0x40 /* DMA Operation Register */
#define TEND 0x18 /* USB-DMAC */
@@ -239,9 +239,8 @@ static void dmae_init(struct sh_dmae_chan *sh_chan)
{
/*
* Default configuration for dual address memory-memory transfer.
- * 0x400 represents auto-request.
*/
- u32 chcr = DM_INC | SM_INC | 0x400 | log2size_to_chcr(sh_chan,
+ u32 chcr = DM_INC | SM_INC | RS_AUTO | log2size_to_chcr(sh_chan,
LOG2_DEFAULT_XFER_SIZE);
sh_chan->xmit_shift = calc_xmit_shift(sh_chan, chcr);
chcr_write(sh_chan, chcr);
diff --git a/drivers/dma/sirf-dma.c b/drivers/dma/sirf-dma.c
index 03f7820fa333..aac03ab10c54 100644
--- a/drivers/dma/sirf-dma.c
+++ b/drivers/dma/sirf-dma.c
@@ -580,7 +580,7 @@ err_dir:
static struct dma_async_tx_descriptor *
sirfsoc_dma_prep_cyclic(struct dma_chan *chan, dma_addr_t addr,
size_t buf_len, size_t period_len,
- enum dma_transfer_direction direction, unsigned long flags, void *context)
+ enum dma_transfer_direction direction, unsigned long flags)
{
struct sirfsoc_dma_chan *schan = dma_chan_to_sirfsoc_dma_chan(chan);
struct sirfsoc_dma_desc *sdesc = NULL;
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index c7984459ede7..5fe59335e247 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -2531,8 +2531,7 @@ d40_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
static struct dma_async_tx_descriptor *
dma40_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr,
size_t buf_len, size_t period_len,
- enum dma_transfer_direction direction, unsigned long flags,
- void *context)
+ enum dma_transfer_direction direction, unsigned long flags)
{
unsigned int periods = buf_len / period_len;
struct dma_async_tx_descriptor *txd;
diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
new file mode 100644
index 000000000000..1f92a56fd2b6
--- /dev/null
+++ b/drivers/dma/sun6i-dma.c
@@ -0,0 +1,1053 @@
+/*
+ * Copyright (C) 2013-2014 Allwinner Tech Co., Ltd
+ * Author: Sugar <shuge@allwinnertech.com>
+ *
+ * Copyright (C) 2014 Maxime Ripard
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dmapool.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_dma.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include "virt-dma.h"
+
+/*
+ * There's 16 physical channels that can work in parallel.
+ *
+ * However we have 30 different endpoints for our requests.
+ *
+ * Since the channels are able to handle only an unidirectional
+ * transfer, we need to allocate more virtual channels so that
+ * everyone can grab one channel.
+ *
+ * Some devices can't work in both direction (mostly because it
+ * wouldn't make sense), so we have a bit fewer virtual channels than
+ * 2 channels per endpoints.
+ */
+
+#define NR_MAX_CHANNELS 16
+#define NR_MAX_REQUESTS 30
+#define NR_MAX_VCHANS 53
+
+/*
+ * Common registers
+ */
+#define DMA_IRQ_EN(x) ((x) * 0x04)
+#define DMA_IRQ_HALF BIT(0)
+#define DMA_IRQ_PKG BIT(1)
+#define DMA_IRQ_QUEUE BIT(2)
+
+#define DMA_IRQ_CHAN_NR 8
+#define DMA_IRQ_CHAN_WIDTH 4
+
+
+#define DMA_IRQ_STAT(x) ((x) * 0x04 + 0x10)
+
+#define DMA_STAT 0x30
+
+/*
+ * Channels specific registers
+ */
+#define DMA_CHAN_ENABLE 0x00
+#define DMA_CHAN_ENABLE_START BIT(0)
+#define DMA_CHAN_ENABLE_STOP 0
+
+#define DMA_CHAN_PAUSE 0x04
+#define DMA_CHAN_PAUSE_PAUSE BIT(1)
+#define DMA_CHAN_PAUSE_RESUME 0
+
+#define DMA_CHAN_LLI_ADDR 0x08
+
+#define DMA_CHAN_CUR_CFG 0x0c
+#define DMA_CHAN_CFG_SRC_DRQ(x) ((x) & 0x1f)
+#define DMA_CHAN_CFG_SRC_IO_MODE BIT(5)
+#define DMA_CHAN_CFG_SRC_LINEAR_MODE (0 << 5)
+#define DMA_CHAN_CFG_SRC_BURST(x) (((x) & 0x3) << 7)
+#define DMA_CHAN_CFG_SRC_WIDTH(x) (((x) & 0x3) << 9)
+
+#define DMA_CHAN_CFG_DST_DRQ(x) (DMA_CHAN_CFG_SRC_DRQ(x) << 16)
+#define DMA_CHAN_CFG_DST_IO_MODE (DMA_CHAN_CFG_SRC_IO_MODE << 16)
+#define DMA_CHAN_CFG_DST_LINEAR_MODE (DMA_CHAN_CFG_SRC_LINEAR_MODE << 16)
+#define DMA_CHAN_CFG_DST_BURST(x) (DMA_CHAN_CFG_SRC_BURST(x) << 16)
+#define DMA_CHAN_CFG_DST_WIDTH(x) (DMA_CHAN_CFG_SRC_WIDTH(x) << 16)
+
+#define DMA_CHAN_CUR_SRC 0x10
+
+#define DMA_CHAN_CUR_DST 0x14
+
+#define DMA_CHAN_CUR_CNT 0x18
+
+#define DMA_CHAN_CUR_PARA 0x1c
+
+
+/*
+ * Various hardware related defines
+ */
+#define LLI_LAST_ITEM 0xfffff800
+#define NORMAL_WAIT 8
+#define DRQ_SDRAM 1
+
+/*
+ * Hardware representation of the LLI
+ *
+ * The hardware will be fed the physical address of this structure,
+ * and read its content in order to start the transfer.
+ */
+struct sun6i_dma_lli {
+ u32 cfg;
+ u32 src;
+ u32 dst;
+ u32 len;
+ u32 para;
+ u32 p_lli_next;
+
+ /*
+ * This field is not used by the DMA controller, but will be
+ * used by the CPU to go through the list (mostly for dumping
+ * or freeing it).
+ */
+ struct sun6i_dma_lli *v_lli_next;
+};
+
+
+struct sun6i_desc {
+ struct virt_dma_desc vd;
+ dma_addr_t p_lli;
+ struct sun6i_dma_lli *v_lli;
+};
+
+struct sun6i_pchan {
+ u32 idx;
+ void __iomem *base;
+ struct sun6i_vchan *vchan;
+ struct sun6i_desc *desc;
+ struct sun6i_desc *done;
+};
+
+struct sun6i_vchan {
+ struct virt_dma_chan vc;
+ struct list_head node;
+ struct dma_slave_config cfg;
+ struct sun6i_pchan *phy;
+ u8 port;
+};
+
+struct sun6i_dma_dev {
+ struct dma_device slave;
+ void __iomem *base;
+ struct clk *clk;
+ int irq;
+ spinlock_t lock;
+ struct reset_control *rstc;
+ struct tasklet_struct task;
+ atomic_t tasklet_shutdown;
+ struct list_head pending;
+ struct dma_pool *pool;
+ struct sun6i_pchan *pchans;
+ struct sun6i_vchan *vchans;
+};
+
+static struct device *chan2dev(struct dma_chan *chan)
+{
+ return &chan->dev->device;
+}
+
+static inline struct sun6i_dma_dev *to_sun6i_dma_dev(struct dma_device *d)
+{
+ return container_of(d, struct sun6i_dma_dev, slave);
+}
+
+static inline struct sun6i_vchan *to_sun6i_vchan(struct dma_chan *chan)
+{
+ return container_of(chan, struct sun6i_vchan, vc.chan);
+}
+
+static inline struct sun6i_desc *
+to_sun6i_desc(struct dma_async_tx_descriptor *tx)
+{
+ return container_of(tx, struct sun6i_desc, vd.tx);
+}
+
+static inline void sun6i_dma_dump_com_regs(struct sun6i_dma_dev *sdev)
+{
+ dev_dbg(sdev->slave.dev, "Common register:\n"
+ "\tmask0(%04x): 0x%08x\n"
+ "\tmask1(%04x): 0x%08x\n"
+ "\tpend0(%04x): 0x%08x\n"
+ "\tpend1(%04x): 0x%08x\n"
+ "\tstats(%04x): 0x%08x\n",
+ DMA_IRQ_EN(0), readl(sdev->base + DMA_IRQ_EN(0)),
+ DMA_IRQ_EN(1), readl(sdev->base + DMA_IRQ_EN(1)),
+ DMA_IRQ_STAT(0), readl(sdev->base + DMA_IRQ_STAT(0)),
+ DMA_IRQ_STAT(1), readl(sdev->base + DMA_IRQ_STAT(1)),
+ DMA_STAT, readl(sdev->base + DMA_STAT));
+}
+
+static inline void sun6i_dma_dump_chan_regs(struct sun6i_dma_dev *sdev,
+ struct sun6i_pchan *pchan)
+{
+ phys_addr_t reg = virt_to_phys(pchan->base);
+
+ dev_dbg(sdev->slave.dev, "Chan %d reg: %pa\n"
+ "\t___en(%04x): \t0x%08x\n"
+ "\tpause(%04x): \t0x%08x\n"
+ "\tstart(%04x): \t0x%08x\n"
+ "\t__cfg(%04x): \t0x%08x\n"
+ "\t__src(%04x): \t0x%08x\n"
+ "\t__dst(%04x): \t0x%08x\n"
+ "\tcount(%04x): \t0x%08x\n"
+ "\t_para(%04x): \t0x%08x\n\n",
+ pchan->idx, &reg,
+ DMA_CHAN_ENABLE,
+ readl(pchan->base + DMA_CHAN_ENABLE),
+ DMA_CHAN_PAUSE,
+ readl(pchan->base + DMA_CHAN_PAUSE),
+ DMA_CHAN_LLI_ADDR,
+ readl(pchan->base + DMA_CHAN_LLI_ADDR),
+ DMA_CHAN_CUR_CFG,
+ readl(pchan->base + DMA_CHAN_CUR_CFG),
+ DMA_CHAN_CUR_SRC,
+ readl(pchan->base + DMA_CHAN_CUR_SRC),
+ DMA_CHAN_CUR_DST,
+ readl(pchan->base + DMA_CHAN_CUR_DST),
+ DMA_CHAN_CUR_CNT,
+ readl(pchan->base + DMA_CHAN_CUR_CNT),
+ DMA_CHAN_CUR_PARA,
+ readl(pchan->base + DMA_CHAN_CUR_PARA));
+}
+
+static inline int convert_burst(u32 maxburst, u8 *burst)
+{
+ switch (maxburst) {
+ case 1:
+ *burst = 0;
+ break;
+ case 8:
+ *burst = 2;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static inline int convert_buswidth(enum dma_slave_buswidth addr_width, u8 *width)
+{
+ if ((addr_width < DMA_SLAVE_BUSWIDTH_1_BYTE) ||
+ (addr_width > DMA_SLAVE_BUSWIDTH_4_BYTES))
+ return -EINVAL;
+
+ *width = addr_width >> 1;
+ return 0;
+}
+
+static void *sun6i_dma_lli_add(struct sun6i_dma_lli *prev,
+ struct sun6i_dma_lli *next,
+ dma_addr_t next_phy,
+ struct sun6i_desc *txd)
+{
+ if ((!prev && !txd) || !next)
+ return NULL;
+
+ if (!prev) {
+ txd->p_lli = next_phy;
+ txd->v_lli = next;
+ } else {
+ prev->p_lli_next = next_phy;
+ prev->v_lli_next = next;
+ }
+
+ next->p_lli_next = LLI_LAST_ITEM;
+ next->v_lli_next = NULL;
+
+ return next;
+}
+
+static inline int sun6i_dma_cfg_lli(struct sun6i_dma_lli *lli,
+ dma_addr_t src,
+ dma_addr_t dst, u32 len,
+ struct dma_slave_config *config)
+{
+ u8 src_width, dst_width, src_burst, dst_burst;
+ int ret;
+
+ if (!config)
+ return -EINVAL;
+
+ ret = convert_burst(config->src_maxburst, &src_burst);
+ if (ret)
+ return ret;
+
+ ret = convert_burst(config->dst_maxburst, &dst_burst);
+ if (ret)
+ return ret;
+
+ ret = convert_buswidth(config->src_addr_width, &src_width);
+ if (ret)
+ return ret;
+
+ ret = convert_buswidth(config->dst_addr_width, &dst_width);
+ if (ret)
+ return ret;
+
+ lli->cfg = DMA_CHAN_CFG_SRC_BURST(src_burst) |
+ DMA_CHAN_CFG_SRC_WIDTH(src_width) |
+ DMA_CHAN_CFG_DST_BURST(dst_burst) |
+ DMA_CHAN_CFG_DST_WIDTH(dst_width);
+
+ lli->src = src;
+ lli->dst = dst;
+ lli->len = len;
+ lli->para = NORMAL_WAIT;
+
+ return 0;
+}
+
+static inline void sun6i_dma_dump_lli(struct sun6i_vchan *vchan,
+ struct sun6i_dma_lli *lli)
+{
+ phys_addr_t p_lli = virt_to_phys(lli);
+
+ dev_dbg(chan2dev(&vchan->vc.chan),
+ "\n\tdesc: p - %pa v - 0x%p\n"
+ "\t\tc - 0x%08x s - 0x%08x d - 0x%08x\n"
+ "\t\tl - 0x%08x p - 0x%08x n - 0x%08x\n",
+ &p_lli, lli,
+ lli->cfg, lli->src, lli->dst,
+ lli->len, lli->para, lli->p_lli_next);
+}
+
+static void sun6i_dma_free_desc(struct virt_dma_desc *vd)
+{
+ struct sun6i_desc *txd = to_sun6i_desc(&vd->tx);
+ struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(vd->tx.chan->device);
+ struct sun6i_dma_lli *v_lli, *v_next;
+ dma_addr_t p_lli, p_next;
+
+ if (unlikely(!txd))
+ return;
+
+ p_lli = txd->p_lli;
+ v_lli = txd->v_lli;
+
+ while (v_lli) {
+ v_next = v_lli->v_lli_next;
+ p_next = v_lli->p_lli_next;
+
+ dma_pool_free(sdev->pool, v_lli, p_lli);
+
+ v_lli = v_next;
+ p_lli = p_next;
+ }
+
+ kfree(txd);
+}
+
+static int sun6i_dma_terminate_all(struct sun6i_vchan *vchan)
+{
+ struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(vchan->vc.chan.device);
+ struct sun6i_pchan *pchan = vchan->phy;
+ unsigned long flags;
+ LIST_HEAD(head);
+
+ spin_lock(&sdev->lock);
+ list_del_init(&vchan->node);
+ spin_unlock(&sdev->lock);
+
+ spin_lock_irqsave(&vchan->vc.lock, flags);
+
+ vchan_get_all_descriptors(&vchan->vc, &head);
+
+ if (pchan) {
+ writel(DMA_CHAN_ENABLE_STOP, pchan->base + DMA_CHAN_ENABLE);
+ writel(DMA_CHAN_PAUSE_RESUME, pchan->base + DMA_CHAN_PAUSE);
+
+ vchan->phy = NULL;
+ pchan->vchan = NULL;
+ pchan->desc = NULL;
+ pchan->done = NULL;
+ }
+
+ spin_unlock_irqrestore(&vchan->vc.lock, flags);
+
+ vchan_dma_desc_free_list(&vchan->vc, &head);
+
+ return 0;
+}
+
+static int sun6i_dma_start_desc(struct sun6i_vchan *vchan)
+{
+ struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(vchan->vc.chan.device);
+ struct virt_dma_desc *desc = vchan_next_desc(&vchan->vc);
+ struct sun6i_pchan *pchan = vchan->phy;
+ u32 irq_val, irq_reg, irq_offset;
+
+ if (!pchan)
+ return -EAGAIN;
+
+ if (!desc) {
+ pchan->desc = NULL;
+ pchan->done = NULL;
+ return -EAGAIN;
+ }
+
+ list_del(&desc->node);
+
+ pchan->desc = to_sun6i_desc(&desc->tx);
+ pchan->done = NULL;
+
+ sun6i_dma_dump_lli(vchan, pchan->desc->v_lli);
+
+ irq_reg = pchan->idx / DMA_IRQ_CHAN_NR;
+ irq_offset = pchan->idx % DMA_IRQ_CHAN_NR;
+
+ irq_val = readl(sdev->base + DMA_IRQ_EN(irq_offset));
+ irq_val |= DMA_IRQ_QUEUE << (irq_offset * DMA_IRQ_CHAN_WIDTH);
+ writel(irq_val, sdev->base + DMA_IRQ_EN(irq_offset));
+
+ writel(pchan->desc->p_lli, pchan->base + DMA_CHAN_LLI_ADDR);
+ writel(DMA_CHAN_ENABLE_START, pchan->base + DMA_CHAN_ENABLE);
+
+ sun6i_dma_dump_com_regs(sdev);
+ sun6i_dma_dump_chan_regs(sdev, pchan);
+
+ return 0;
+}
+
+static void sun6i_dma_tasklet(unsigned long data)
+{
+ struct sun6i_dma_dev *sdev = (struct sun6i_dma_dev *)data;
+ struct sun6i_vchan *vchan;
+ struct sun6i_pchan *pchan;
+ unsigned int pchan_alloc = 0;
+ unsigned int pchan_idx;
+
+ list_for_each_entry(vchan, &sdev->slave.channels, vc.chan.device_node) {
+ spin_lock_irq(&vchan->vc.lock);
+
+ pchan = vchan->phy;
+
+ if (pchan && pchan->done) {
+ if (sun6i_dma_start_desc(vchan)) {
+ /*
+ * No current txd associated with this channel
+ */
+ dev_dbg(sdev->slave.dev, "pchan %u: free\n",
+ pchan->idx);
+
+ /* Mark this channel free */
+ vchan->phy = NULL;
+ pchan->vchan = NULL;
+ }
+ }
+ spin_unlock_irq(&vchan->vc.lock);
+ }
+
+ spin_lock_irq(&sdev->lock);
+ for (pchan_idx = 0; pchan_idx < NR_MAX_CHANNELS; pchan_idx++) {
+ pchan = &sdev->pchans[pchan_idx];
+
+ if (pchan->vchan || list_empty(&sdev->pending))
+ continue;
+
+ vchan = list_first_entry(&sdev->pending,
+ struct sun6i_vchan, node);
+
+ /* Remove from pending channels */
+ list_del_init(&vchan->node);
+ pchan_alloc |= BIT(pchan_idx);
+
+ /* Mark this channel allocated */
+ pchan->vchan = vchan;
+ vchan->phy = pchan;
+ dev_dbg(sdev->slave.dev, "pchan %u: alloc vchan %p\n",
+ pchan->idx, &vchan->vc);
+ }
+ spin_unlock_irq(&sdev->lock);
+
+ for (pchan_idx = 0; pchan_idx < NR_MAX_CHANNELS; pchan_idx++) {
+ if (!(pchan_alloc & BIT(pchan_idx)))
+ continue;
+
+ pchan = sdev->pchans + pchan_idx;
+ vchan = pchan->vchan;
+ if (vchan) {
+ spin_lock_irq(&vchan->vc.lock);
+ sun6i_dma_start_desc(vchan);
+ spin_unlock_irq(&vchan->vc.lock);
+ }
+ }
+}
+
+static irqreturn_t sun6i_dma_interrupt(int irq, void *dev_id)
+{
+ struct sun6i_dma_dev *sdev = dev_id;
+ struct sun6i_vchan *vchan;
+ struct sun6i_pchan *pchan;
+ int i, j, ret = IRQ_NONE;
+ u32 status;
+
+ for (i = 0; i < 2; i++) {
+ status = readl(sdev->base + DMA_IRQ_STAT(i));
+ if (!status)
+ continue;
+
+ dev_dbg(sdev->slave.dev, "DMA irq status %s: 0x%x\n",
+ i ? "high" : "low", status);
+
+ writel(status, sdev->base + DMA_IRQ_STAT(i));
+
+ for (j = 0; (j < 8) && status; j++) {
+ if (status & DMA_IRQ_QUEUE) {
+ pchan = sdev->pchans + j;
+ vchan = pchan->vchan;
+
+ if (vchan) {
+ spin_lock(&vchan->vc.lock);
+ vchan_cookie_complete(&pchan->desc->vd);
+ pchan->done = pchan->desc;
+ spin_unlock(&vchan->vc.lock);
+ }
+ }
+
+ status = status >> 4;
+ }
+
+ if (!atomic_read(&sdev->tasklet_shutdown))
+ tasklet_schedule(&sdev->task);
+ ret = IRQ_HANDLED;
+ }
+
+ return ret;
+}
+
+static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_memcpy(
+ struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
+ size_t len, unsigned long flags)
+{
+ struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
+ struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
+ struct dma_slave_config *sconfig = &vchan->cfg;
+ struct sun6i_dma_lli *v_lli;
+ struct sun6i_desc *txd;
+ dma_addr_t p_lli;
+ int ret;
+
+ dev_dbg(chan2dev(chan),
+ "%s; chan: %d, dest: %pad, src: %pad, len: %zu. flags: 0x%08lx\n",
+ __func__, vchan->vc.chan.chan_id, &dest, &src, len, flags);
+
+ if (!len)
+ return NULL;
+
+ txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
+ if (!txd)
+ return NULL;
+
+ v_lli = dma_pool_alloc(sdev->pool, GFP_NOWAIT, &p_lli);
+ if (!v_lli) {
+ dev_err(sdev->slave.dev, "Failed to alloc lli memory\n");
+ goto err_txd_free;
+ }
+
+ ret = sun6i_dma_cfg_lli(v_lli, src, dest, len, sconfig);
+ if (ret)
+ goto err_dma_free;
+
+ v_lli->cfg |= DMA_CHAN_CFG_SRC_DRQ(DRQ_SDRAM) |
+ DMA_CHAN_CFG_DST_DRQ(DRQ_SDRAM) |
+ DMA_CHAN_CFG_DST_LINEAR_MODE |
+ DMA_CHAN_CFG_SRC_LINEAR_MODE;
+
+ sun6i_dma_lli_add(NULL, v_lli, p_lli, txd);
+
+ sun6i_dma_dump_lli(vchan, v_lli);
+
+ return vchan_tx_prep(&vchan->vc, &txd->vd, flags);
+
+err_dma_free:
+ dma_pool_free(sdev->pool, v_lli, p_lli);
+err_txd_free:
+ kfree(txd);
+ return NULL;
+}
+
+static struct dma_async_tx_descriptor *sun6i_dma_prep_slave_sg(
+ struct dma_chan *chan, struct scatterlist *sgl,
+ unsigned int sg_len, enum dma_transfer_direction dir,
+ unsigned long flags, void *context)
+{
+ struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
+ struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
+ struct dma_slave_config *sconfig = &vchan->cfg;
+ struct sun6i_dma_lli *v_lli, *prev = NULL;
+ struct sun6i_desc *txd;
+ struct scatterlist *sg;
+ dma_addr_t p_lli;
+ int i, ret;
+
+ if (!sgl)
+ return NULL;
+
+ if (!is_slave_direction(dir)) {
+ dev_err(chan2dev(chan), "Invalid DMA direction\n");
+ return NULL;
+ }
+
+ txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
+ if (!txd)
+ return NULL;
+
+ for_each_sg(sgl, sg, sg_len, i) {
+ v_lli = dma_pool_alloc(sdev->pool, GFP_NOWAIT, &p_lli);
+ if (!v_lli)
+ goto err_lli_free;
+
+ if (dir == DMA_MEM_TO_DEV) {
+ ret = sun6i_dma_cfg_lli(v_lli, sg_dma_address(sg),
+ sconfig->dst_addr, sg_dma_len(sg),
+ sconfig);
+ if (ret)
+ goto err_cur_lli_free;
+
+ v_lli->cfg |= DMA_CHAN_CFG_DST_IO_MODE |
+ DMA_CHAN_CFG_SRC_LINEAR_MODE |
+ DMA_CHAN_CFG_SRC_DRQ(DRQ_SDRAM) |
+ DMA_CHAN_CFG_DST_DRQ(vchan->port);
+
+ dev_dbg(chan2dev(chan),
+ "%s; chan: %d, dest: %pad, src: %pad, len: %u. flags: 0x%08lx\n",
+ __func__, vchan->vc.chan.chan_id,
+ &sconfig->dst_addr, &sg_dma_address(sg),
+ sg_dma_len(sg), flags);
+
+ } else {
+ ret = sun6i_dma_cfg_lli(v_lli, sconfig->src_addr,
+ sg_dma_address(sg), sg_dma_len(sg),
+ sconfig);
+ if (ret)
+ goto err_cur_lli_free;
+
+ v_lli->cfg |= DMA_CHAN_CFG_DST_LINEAR_MODE |
+ DMA_CHAN_CFG_SRC_IO_MODE |
+ DMA_CHAN_CFG_DST_DRQ(DRQ_SDRAM) |
+ DMA_CHAN_CFG_SRC_DRQ(vchan->port);
+
+ dev_dbg(chan2dev(chan),
+ "%s; chan: %d, dest: %pad, src: %pad, len: %u. flags: 0x%08lx\n",
+ __func__, vchan->vc.chan.chan_id,
+ &sg_dma_address(sg), &sconfig->src_addr,
+ sg_dma_len(sg), flags);
+ }
+
+ prev = sun6i_dma_lli_add(prev, v_lli, p_lli, txd);
+ }
+
+ dev_dbg(chan2dev(chan), "First: %pad\n", &txd->p_lli);
+ for (prev = txd->v_lli; prev; prev = prev->v_lli_next)
+ sun6i_dma_dump_lli(vchan, prev);
+
+ return vchan_tx_prep(&vchan->vc, &txd->vd, flags);
+
+err_cur_lli_free:
+ dma_pool_free(sdev->pool, v_lli, p_lli);
+err_lli_free:
+ for (prev = txd->v_lli; prev; prev = prev->v_lli_next)
+ dma_pool_free(sdev->pool, prev, virt_to_phys(prev));
+ kfree(txd);
+ return NULL;
+}
+
+static int sun6i_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
+ unsigned long arg)
+{
+ struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
+ struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
+ struct sun6i_pchan *pchan = vchan->phy;
+ unsigned long flags;
+ int ret = 0;
+
+ switch (cmd) {
+ case DMA_RESUME:
+ dev_dbg(chan2dev(chan), "vchan %p: resume\n", &vchan->vc);
+
+ spin_lock_irqsave(&vchan->vc.lock, flags);
+
+ if (pchan) {
+ writel(DMA_CHAN_PAUSE_RESUME,
+ pchan->base + DMA_CHAN_PAUSE);
+ } else if (!list_empty(&vchan->vc.desc_issued)) {
+ spin_lock(&sdev->lock);
+ list_add_tail(&vchan->node, &sdev->pending);
+ spin_unlock(&sdev->lock);
+ }
+
+ spin_unlock_irqrestore(&vchan->vc.lock, flags);
+ break;
+
+ case DMA_PAUSE:
+ dev_dbg(chan2dev(chan), "vchan %p: pause\n", &vchan->vc);
+
+ if (pchan) {
+ writel(DMA_CHAN_PAUSE_PAUSE,
+ pchan->base + DMA_CHAN_PAUSE);
+ } else {
+ spin_lock(&sdev->lock);
+ list_del_init(&vchan->node);
+ spin_unlock(&sdev->lock);
+ }
+ break;
+
+ case DMA_TERMINATE_ALL:
+ ret = sun6i_dma_terminate_all(vchan);
+ break;
+ case DMA_SLAVE_CONFIG:
+ memcpy(&vchan->cfg, (void *)arg, sizeof(struct dma_slave_config));
+ break;
+ default:
+ ret = -ENXIO;
+ break;
+ }
+ return ret;
+}
+
+static enum dma_status sun6i_dma_tx_status(struct dma_chan *chan,
+ dma_cookie_t cookie,
+ struct dma_tx_state *state)
+{
+ struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
+ struct sun6i_pchan *pchan = vchan->phy;
+ struct sun6i_dma_lli *lli;
+ struct virt_dma_desc *vd;
+ struct sun6i_desc *txd;
+ enum dma_status ret;
+ unsigned long flags;
+ size_t bytes = 0;
+
+ ret = dma_cookie_status(chan, cookie, state);
+ if (ret == DMA_COMPLETE)
+ return ret;
+
+ spin_lock_irqsave(&vchan->vc.lock, flags);
+
+ vd = vchan_find_desc(&vchan->vc, cookie);
+ txd = to_sun6i_desc(&vd->tx);
+
+ if (vd) {
+ for (lli = txd->v_lli; lli != NULL; lli = lli->v_lli_next)
+ bytes += lli->len;
+ } else if (!pchan || !pchan->desc) {
+ bytes = 0;
+ } else {
+ bytes = readl(pchan->base + DMA_CHAN_CUR_CNT);
+ }
+
+ spin_unlock_irqrestore(&vchan->vc.lock, flags);
+
+ dma_set_residue(state, bytes);
+
+ return ret;
+}
+
+static void sun6i_dma_issue_pending(struct dma_chan *chan)
+{
+ struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
+ struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
+ unsigned long flags;
+
+ spin_lock_irqsave(&vchan->vc.lock, flags);
+
+ if (vchan_issue_pending(&vchan->vc)) {
+ spin_lock(&sdev->lock);
+
+ if (!vchan->phy && list_empty(&vchan->node)) {
+ list_add_tail(&vchan->node, &sdev->pending);
+ tasklet_schedule(&sdev->task);
+ dev_dbg(chan2dev(chan), "vchan %p: issued\n",
+ &vchan->vc);
+ }
+
+ spin_unlock(&sdev->lock);
+ } else {
+ dev_dbg(chan2dev(chan), "vchan %p: nothing to issue\n",
+ &vchan->vc);
+ }
+
+ spin_unlock_irqrestore(&vchan->vc.lock, flags);
+}
+
+static int sun6i_dma_alloc_chan_resources(struct dma_chan *chan)
+{
+ return 0;
+}
+
+static void sun6i_dma_free_chan_resources(struct dma_chan *chan)
+{
+ struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
+ struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
+ unsigned long flags;
+
+ spin_lock_irqsave(&sdev->lock, flags);
+ list_del_init(&vchan->node);
+ spin_unlock_irqrestore(&sdev->lock, flags);
+
+ vchan_free_chan_resources(&vchan->vc);
+}
+
+static struct dma_chan *sun6i_dma_of_xlate(struct of_phandle_args *dma_spec,
+ struct of_dma *ofdma)
+{
+ struct sun6i_dma_dev *sdev = ofdma->of_dma_data;
+ struct sun6i_vchan *vchan;
+ struct dma_chan *chan;
+ u8 port = dma_spec->args[0];
+
+ if (port > NR_MAX_REQUESTS)
+ return NULL;
+
+ chan = dma_get_any_slave_channel(&sdev->slave);
+ if (!chan)
+ return NULL;
+
+ vchan = to_sun6i_vchan(chan);
+ vchan->port = port;
+
+ return chan;
+}
+
+static inline void sun6i_kill_tasklet(struct sun6i_dma_dev *sdev)
+{
+ /* Disable all interrupts from DMA */
+ writel(0, sdev->base + DMA_IRQ_EN(0));
+ writel(0, sdev->base + DMA_IRQ_EN(1));
+
+ /* Prevent spurious interrupts from scheduling the tasklet */
+ atomic_inc(&sdev->tasklet_shutdown);
+
+ /* Make sure we won't have any further interrupts */
+ devm_free_irq(sdev->slave.dev, sdev->irq, sdev);
+
+ /* Actually prevent the tasklet from being scheduled */
+ tasklet_kill(&sdev->task);
+}
+
+static inline void sun6i_dma_free(struct sun6i_dma_dev *sdev)
+{
+ int i;
+
+ for (i = 0; i < NR_MAX_VCHANS; i++) {
+ struct sun6i_vchan *vchan = &sdev->vchans[i];
+
+ list_del(&vchan->vc.chan.device_node);
+ tasklet_kill(&vchan->vc.task);
+ }
+}
+
+static int sun6i_dma_probe(struct platform_device *pdev)
+{
+ struct sun6i_dma_dev *sdc;
+ struct resource *res;
+ struct clk *mux, *pll6;
+ int ret, i;
+
+ sdc = devm_kzalloc(&pdev->dev, sizeof(*sdc), GFP_KERNEL);
+ if (!sdc)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ sdc->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(sdc->base))
+ return PTR_ERR(sdc->base);
+
+ sdc->irq = platform_get_irq(pdev, 0);
+ if (sdc->irq < 0) {
+ dev_err(&pdev->dev, "Cannot claim IRQ\n");
+ return sdc->irq;
+ }
+
+ sdc->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(sdc->clk)) {
+ dev_err(&pdev->dev, "No clock specified\n");
+ return PTR_ERR(sdc->clk);
+ }
+
+ mux = clk_get(NULL, "ahb1_mux");
+ if (IS_ERR(mux)) {
+ dev_err(&pdev->dev, "Couldn't get AHB1 Mux\n");
+ return PTR_ERR(mux);
+ }
+
+ pll6 = clk_get(NULL, "pll6");
+ if (IS_ERR(pll6)) {
+ dev_err(&pdev->dev, "Couldn't get PLL6\n");
+ clk_put(mux);
+ return PTR_ERR(pll6);
+ }
+
+ ret = clk_set_parent(mux, pll6);
+ clk_put(pll6);
+ clk_put(mux);
+
+ if (ret) {
+ dev_err(&pdev->dev, "Couldn't reparent AHB1 on PLL6\n");
+ return ret;
+ }
+
+ sdc->rstc = devm_reset_control_get(&pdev->dev, NULL);
+ if (IS_ERR(sdc->rstc)) {
+ dev_err(&pdev->dev, "No reset controller specified\n");
+ return PTR_ERR(sdc->rstc);
+ }
+
+ sdc->pool = dmam_pool_create(dev_name(&pdev->dev), &pdev->dev,
+ sizeof(struct sun6i_dma_lli), 4, 0);
+ if (!sdc->pool) {
+ dev_err(&pdev->dev, "No memory for descriptors dma pool\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(pdev, sdc);
+ INIT_LIST_HEAD(&sdc->pending);
+ spin_lock_init(&sdc->lock);
+
+ dma_cap_set(DMA_PRIVATE, sdc->slave.cap_mask);
+ dma_cap_set(DMA_MEMCPY, sdc->slave.cap_mask);
+ dma_cap_set(DMA_SLAVE, sdc->slave.cap_mask);
+
+ INIT_LIST_HEAD(&sdc->slave.channels);
+ sdc->slave.device_alloc_chan_resources = sun6i_dma_alloc_chan_resources;
+ sdc->slave.device_free_chan_resources = sun6i_dma_free_chan_resources;
+ sdc->slave.device_tx_status = sun6i_dma_tx_status;
+ sdc->slave.device_issue_pending = sun6i_dma_issue_pending;
+ sdc->slave.device_prep_slave_sg = sun6i_dma_prep_slave_sg;
+ sdc->slave.device_prep_dma_memcpy = sun6i_dma_prep_dma_memcpy;
+ sdc->slave.device_control = sun6i_dma_control;
+ sdc->slave.chancnt = NR_MAX_VCHANS;
+
+ sdc->slave.dev = &pdev->dev;
+
+ sdc->pchans = devm_kcalloc(&pdev->dev, NR_MAX_CHANNELS,
+ sizeof(struct sun6i_pchan), GFP_KERNEL);
+ if (!sdc->pchans)
+ return -ENOMEM;
+
+ sdc->vchans = devm_kcalloc(&pdev->dev, NR_MAX_VCHANS,
+ sizeof(struct sun6i_vchan), GFP_KERNEL);
+ if (!sdc->vchans)
+ return -ENOMEM;
+
+ tasklet_init(&sdc->task, sun6i_dma_tasklet, (unsigned long)sdc);
+
+ for (i = 0; i < NR_MAX_CHANNELS; i++) {
+ struct sun6i_pchan *pchan = &sdc->pchans[i];
+
+ pchan->idx = i;
+ pchan->base = sdc->base + 0x100 + i * 0x40;
+ }
+
+ for (i = 0; i < NR_MAX_VCHANS; i++) {
+ struct sun6i_vchan *vchan = &sdc->vchans[i];
+
+ INIT_LIST_HEAD(&vchan->node);
+ vchan->vc.desc_free = sun6i_dma_free_desc;
+ vchan_init(&vchan->vc, &sdc->slave);
+ }
+
+ ret = reset_control_deassert(sdc->rstc);
+ if (ret) {
+ dev_err(&pdev->dev, "Couldn't deassert the device from reset\n");
+ goto err_chan_free;
+ }
+
+ ret = clk_prepare_enable(sdc->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Couldn't enable the clock\n");
+ goto err_reset_assert;
+ }
+
+ ret = devm_request_irq(&pdev->dev, sdc->irq, sun6i_dma_interrupt, 0,
+ dev_name(&pdev->dev), sdc);
+ if (ret) {
+ dev_err(&pdev->dev, "Cannot request IRQ\n");
+ goto err_clk_disable;
+ }
+
+ ret = dma_async_device_register(&sdc->slave);
+ if (ret) {
+ dev_warn(&pdev->dev, "Failed to register DMA engine device\n");
+ goto err_irq_disable;
+ }
+
+ ret = of_dma_controller_register(pdev->dev.of_node, sun6i_dma_of_xlate,
+ sdc);
+ if (ret) {
+ dev_err(&pdev->dev, "of_dma_controller_register failed\n");
+ goto err_dma_unregister;
+ }
+
+ return 0;
+
+err_dma_unregister:
+ dma_async_device_unregister(&sdc->slave);
+err_irq_disable:
+ sun6i_kill_tasklet(sdc);
+err_clk_disable:
+ clk_disable_unprepare(sdc->clk);
+err_reset_assert:
+ reset_control_assert(sdc->rstc);
+err_chan_free:
+ sun6i_dma_free(sdc);
+ return ret;
+}
+
+static int sun6i_dma_remove(struct platform_device *pdev)
+{
+ struct sun6i_dma_dev *sdc = platform_get_drvdata(pdev);
+
+ of_dma_controller_free(pdev->dev.of_node);
+ dma_async_device_unregister(&sdc->slave);
+
+ sun6i_kill_tasklet(sdc);
+
+ clk_disable_unprepare(sdc->clk);
+ reset_control_assert(sdc->rstc);
+
+ sun6i_dma_free(sdc);
+
+ return 0;
+}
+
+static struct of_device_id sun6i_dma_match[] = {
+ { .compatible = "allwinner,sun6i-a31-dma" },
+ { /* sentinel */ }
+};
+
+static struct platform_driver sun6i_dma_driver = {
+ .probe = sun6i_dma_probe,
+ .remove = sun6i_dma_remove,
+ .driver = {
+ .name = "sun6i-dma",
+ .of_match_table = sun6i_dma_match,
+ },
+};
+module_platform_driver(sun6i_dma_driver);
+
+MODULE_DESCRIPTION("Allwinner A31 DMA Controller Driver");
+MODULE_AUTHOR("Sugar <shuge@allwinnertech.com>");
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index 03ad64ecaaf0..16efa603ff65 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -1055,7 +1055,7 @@ static struct dma_async_tx_descriptor *tegra_dma_prep_slave_sg(
static struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic(
struct dma_chan *dc, dma_addr_t buf_addr, size_t buf_len,
size_t period_len, enum dma_transfer_direction direction,
- unsigned long flags, void *context)
+ unsigned long flags)
{
struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc);
struct tegra_dma_desc *dma_desc = NULL;
diff --git a/include/dt-bindings/dma/nbpfaxi.h b/include/dt-bindings/dma/nbpfaxi.h
new file mode 100644
index 000000000000..c1a5b9e0d6a4
--- /dev/null
+++ b/include/dt-bindings/dma/nbpfaxi.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2013-2014 Renesas Electronics Europe Ltd.
+ * Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef DT_BINDINGS_NBPFAXI_H
+#define DT_BINDINGS_NBPFAXI_H
+
+/**
+ * Use "#dma-cells = <2>;" with the second integer defining slave DMA flags:
+ */
+#define NBPF_SLAVE_RQ_HIGH 1
+#define NBPF_SLAVE_RQ_LOW 2
+#define NBPF_SLAVE_RQ_LEVEL 4
+
+#endif
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 3d1c2aa51530..1f9e642c66ad 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -37,7 +37,6 @@
*/
typedef s32 dma_cookie_t;
#define DMA_MIN_COOKIE 1
-#define DMA_MAX_COOKIE INT_MAX
static inline int dma_submit_error(dma_cookie_t cookie)
{
@@ -671,7 +670,7 @@ struct dma_device {
struct dma_async_tx_descriptor *(*device_prep_dma_cyclic)(
struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
size_t period_len, enum dma_transfer_direction direction,
- unsigned long flags, void *context);
+ unsigned long flags);
struct dma_async_tx_descriptor *(*device_prep_interleaved_dma)(
struct dma_chan *chan, struct dma_interleaved_template *xt,
unsigned long flags);
@@ -746,7 +745,7 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic(
unsigned long flags)
{
return chan->device->device_prep_dma_cyclic(chan, buf_addr, buf_len,
- period_len, dir, flags, NULL);
+ period_len, dir, flags);
}
static inline struct dma_async_tx_descriptor *dmaengine_prep_interleaved_dma(
diff --git a/include/linux/of_dma.h b/include/linux/of_dma.h
index ae36298ba076..56bc026c143f 100644
--- a/include/linux/of_dma.h
+++ b/include/linux/of_dma.h
@@ -41,6 +41,8 @@ extern struct dma_chan *of_dma_request_slave_channel(struct device_node *np,
const char *name);
extern struct dma_chan *of_dma_simple_xlate(struct of_phandle_args *dma_spec,
struct of_dma *ofdma);
+extern struct dma_chan *of_dma_xlate_by_chan_id(struct of_phandle_args *dma_spec,
+ struct of_dma *ofdma);
#else
static inline int of_dma_controller_register(struct device_node *np,
struct dma_chan *(*of_dma_xlate)
@@ -66,6 +68,8 @@ static inline struct dma_chan *of_dma_simple_xlate(struct of_phandle_args *dma_s
return NULL;
}
+#define of_dma_xlate_by_chan_id NULL
+
#endif
#endif /* __LINUX_OF_DMA_H */
diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h
index d05542aafa3e..6a1357d31871 100644
--- a/include/linux/platform_data/dma-imx.h
+++ b/include/linux/platform_data/dma-imx.h
@@ -40,6 +40,7 @@ enum sdma_peripheral_type {
IMX_DMATYPE_ASRC, /* ASRC */
IMX_DMATYPE_ESAI, /* ESAI */
IMX_DMATYPE_SSI_DUAL, /* SSI Dual FIFO */
+ IMX_DMATYPE_ASRC_SP, /* Shared ASRC */
};
enum imx_dma_prio {
diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h
index eb8d5627d080..bdb2710e2aab 100644
--- a/include/linux/platform_data/edma.h
+++ b/include/linux/platform_data/edma.h
@@ -150,6 +150,8 @@ void edma_clear_event(unsigned channel);
void edma_pause(unsigned channel);
void edma_resume(unsigned channel);
+void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no);
+
struct edma_rsv_info {
const s16 (*rsv_chans)[2];
diff --git a/include/linux/sh_dma.h b/include/linux/sh_dma.h
index b7b43b82231e..56b97eed28a4 100644
--- a/include/linux/sh_dma.h
+++ b/include/linux/sh_dma.h
@@ -95,19 +95,21 @@ struct sh_dmae_pdata {
};
/* DMAOR definitions */
-#define DMAOR_AE 0x00000004
+#define DMAOR_AE 0x00000004 /* Address Error Flag */
#define DMAOR_NMIF 0x00000002
-#define DMAOR_DME 0x00000001
+#define DMAOR_DME 0x00000001 /* DMA Master Enable */
/* Definitions for the SuperH DMAC */
-#define DM_INC 0x00004000
-#define DM_DEC 0x00008000
-#define DM_FIX 0x0000c000
-#define SM_INC 0x00001000
-#define SM_DEC 0x00002000
-#define SM_FIX 0x00003000
-#define CHCR_DE 0x00000001
-#define CHCR_TE 0x00000002
-#define CHCR_IE 0x00000004
+#define DM_INC 0x00004000 /* Destination addresses are incremented */
+#define DM_DEC 0x00008000 /* Destination addresses are decremented */
+#define DM_FIX 0x0000c000 /* Destination address is fixed */
+#define SM_INC 0x00001000 /* Source addresses are incremented */
+#define SM_DEC 0x00002000 /* Source addresses are decremented */
+#define SM_FIX 0x00003000 /* Source address is fixed */
+#define RS_AUTO 0x00000400 /* Auto Request */
+#define RS_ERS 0x00000800 /* DMA extended resource selector */
+#define CHCR_DE 0x00000001 /* DMA Enable */
+#define CHCR_TE 0x00000002 /* Transfer End Flag */
+#define CHCR_IE 0x00000004 /* Interrupt Enable */
#endif