summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-01-30 04:56:20 +0100
committerLinus Torvalds <torvalds@linux-foundation.org>2014-01-30 04:56:20 +0100
commitf7a6ad9fa24e4511a143e2b7b8a0d55864fe2edf (patch)
treec8bdb1a08729439fc8846c024ded296b9ef3b988
parentMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/g... (diff)
parenti2c: rcar: fix NACK error code (diff)
downloadlinux-f7a6ad9fa24e4511a143e2b7b8a0d55864fe2edf.tar.xz
linux-f7a6ad9fa24e4511a143e2b7b8a0d55864fe2edf.zip
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang: "Mostly bugfixes, small but wanted cleanups, and Paul's init.h removal applied" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: rcar: fix NACK error code i2c: update i2c_algorithm documentation i2c: rcar: use devm_clk_get to ensure clock is properly ref-counted i2c: rcar: do not print error if device nacks transfer i2c: rely on driver core when sanitizing devices i2c: delete non-required instances of include <linux/init.h> i2c: acorn: is tristate and should use module.h i2c: piix4: Standardize log messages i2c: piix4: Use different message for AMD Auxiliary SMBus Controller i2c: piix4: Add support for AMD ML and CZ SMBus changes
-rw-r--r--Documentation/i2c/busses/i2c-piix42
-rw-r--r--drivers/i2c/algos/i2c-algo-bit.c1
-rw-r--r--drivers/i2c/algos/i2c-algo-pca.c1
-rw-r--r--drivers/i2c/algos/i2c-algo-pcf.c1
-rw-r--r--drivers/i2c/busses/Kconfig1
-rw-r--r--drivers/i2c/busses/i2c-acorn.c2
-rw-r--r--drivers/i2c/busses/i2c-ali1535.c1
-rw-r--r--drivers/i2c/busses/i2c-ali1563.c1
-rw-r--r--drivers/i2c/busses/i2c-ali15x3.c1
-rw-r--r--drivers/i2c/busses/i2c-amd756.c1
-rw-r--r--drivers/i2c/busses/i2c-amd8111.c1
-rw-r--r--drivers/i2c/busses/i2c-au1550.c1
-rw-r--r--drivers/i2c/busses/i2c-cbus-gpio.c1
-rw-r--r--drivers/i2c/busses/i2c-cpm.c1
-rw-r--r--drivers/i2c/busses/i2c-eg20t.c1
-rw-r--r--drivers/i2c/busses/i2c-exynos5.c1
-rw-r--r--drivers/i2c/busses/i2c-highlander.c1
-rw-r--r--drivers/i2c/busses/i2c-hydra.c1
-rw-r--r--drivers/i2c/busses/i2c-ibm_iic.c1
-rw-r--r--drivers/i2c/busses/i2c-iop3xx.c1
-rw-r--r--drivers/i2c/busses/i2c-isch.c1
-rw-r--r--drivers/i2c/busses/i2c-ismt.c1
-rw-r--r--drivers/i2c/busses/i2c-mpc.c1
-rw-r--r--drivers/i2c/busses/i2c-nforce2.c1
-rw-r--r--drivers/i2c/busses/i2c-ocores.c1
-rw-r--r--drivers/i2c/busses/i2c-octeon.c1
-rw-r--r--drivers/i2c/busses/i2c-pca-platform.c1
-rw-r--r--drivers/i2c/busses/i2c-piix4.c44
-rw-r--r--drivers/i2c/busses/i2c-pmcmsp.c1
-rw-r--r--drivers/i2c/busses/i2c-powermac.c1
-rw-r--r--drivers/i2c/busses/i2c-puv3.c1
-rw-r--r--drivers/i2c/busses/i2c-rcar.c22
-rw-r--r--drivers/i2c/busses/i2c-scmi.c1
-rw-r--r--drivers/i2c/busses/i2c-sh7760.c1
-rw-r--r--drivers/i2c/busses/i2c-simtec.c1
-rw-r--r--drivers/i2c/busses/i2c-sis630.c1
-rw-r--r--drivers/i2c/busses/i2c-sis96x.c1
-rw-r--r--drivers/i2c/busses/i2c-via.c1
-rw-r--r--drivers/i2c/busses/i2c-xiic.c1
-rw-r--r--drivers/i2c/busses/i2c-xlr.c1
-rw-r--r--drivers/i2c/busses/scx200_i2c.c1
-rw-r--r--drivers/i2c/i2c-core.c13
-rw-r--r--drivers/i2c/muxes/i2c-arb-gpio-challenge.c1
-rw-r--r--drivers/i2c/muxes/i2c-mux-gpio.c1
-rw-r--r--drivers/i2c/muxes/i2c-mux-pca9541.c1
-rw-r--r--drivers/i2c/muxes/i2c-mux-pca954x.c1
-rw-r--r--drivers/i2c/muxes/i2c-mux-pinctrl.c1
-rw-r--r--include/linux/i2c.h16
48 files changed, 64 insertions, 77 deletions
diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4
index c097e0f020fe..aa959fd22450 100644
--- a/Documentation/i2c/busses/i2c-piix4
+++ b/Documentation/i2c/busses/i2c-piix4
@@ -13,7 +13,7 @@ Supported adapters:
* AMD SP5100 (SB700 derivative found on some server mainboards)
Datasheet: Publicly available at the AMD website
http://support.amd.com/us/Embedded_TechDocs/44413.pdf
- * AMD Hudson-2, CZ
+ * AMD Hudson-2, ML, CZ
Datasheet: Not publicly available
* Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge
Datasheet: Publicly available at the SMSC website http://www.smsc.com
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index b7a6acfcb300..65ef9664d5da 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -25,7 +25,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
-#include <linux/init.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/i2c.h>
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index f892a424009b..8b10f88b13d9 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -24,7 +24,6 @@
#include <linux/moduleparam.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
-#include <linux/init.h>
#include <linux/errno.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-pca.h>
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 5c2379522aa9..34370090b753 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -30,7 +30,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
-#include <linux/init.h>
#include <linux/errno.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-pcf.h>
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 6bcdea5856af..f5ed03164d86 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -152,6 +152,7 @@ config I2C_PIIX4
ATI SB700/SP5100
ATI SB800
AMD Hudson-2
+ AMD ML
AMD CZ
Serverworks OSB4
Serverworks CSB5
diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c
index ed9f48d566db..9d7be5af2bf2 100644
--- a/drivers/i2c/busses/i2c-acorn.c
+++ b/drivers/i2c/busses/i2c-acorn.c
@@ -12,7 +12,7 @@
* On Acorn machines, the following i2c devices are on the bus:
* - PCF8583 real time clock & static RAM
*/
-#include <linux/init.h>
+#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <linux/io.h>
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index 3f491815e2c4..7d60d3a1f621 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -58,7 +58,6 @@
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/i2c.h>
-#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/io.h>
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index 84ccd9496a5e..4611e4754a67 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -20,7 +20,6 @@
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/acpi.h>
#define ALI1563_MAX_TIMEOUT 500
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index 26bcc6127cee..4823206a4870 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -65,7 +65,6 @@
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/i2c.h>
-#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/io.h>
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index e13e2aa2d05d..819d3c1062a7 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -41,7 +41,6 @@
#include <linux/stddef.h>
#include <linux/ioport.h>
#include <linux/i2c.h>
-#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/io.h>
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index a44e6e77c5a1..f3d4d79855b5 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -13,7 +13,6 @@
#include <linux/kernel.h>
#include <linux/stddef.h>
#include <linux/ioport.h>
-#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/acpi.h>
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index b5b89239d622..8762458ca7da 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -31,7 +31,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/init.h>
#include <linux/errno.h>
#include <linux/i2c.h>
#include <linux/slab.h>
diff --git a/drivers/i2c/busses/i2c-cbus-gpio.c b/drivers/i2c/busses/i2c-cbus-gpio.c
index ce7ffba2b020..bdf040fd8675 100644
--- a/drivers/i2c/busses/i2c-cbus-gpio.c
+++ b/drivers/i2c/busses/i2c-cbus-gpio.c
@@ -19,7 +19,6 @@
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/errno.h>
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 3e5ea2c87a6e..be7f0a20d634 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -33,7 +33,6 @@
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/slab.h>
-#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/stddef.h>
diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index ff15ae90aaf5..e08e458bab02 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -18,7 +18,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
-#include <linux/init.h>
#include <linux/errno.h>
#include <linux/i2c.h>
#include <linux/fs.h>
diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index 044f85b01d06..9fd711c03dd2 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -12,7 +12,6 @@
#include <linux/module.h>
#include <linux/i2c.h>
-#include <linux/init.h>
#include <linux/time.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c
index 436b0f254916..512fcfabc18e 100644
--- a/drivers/i2c/busses/i2c-highlander.c
+++ b/drivers/i2c/busses/i2c-highlander.c
@@ -12,7 +12,6 @@
* of this archive for more details.
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c
index 79c3d9069a48..e248257fe517 100644
--- a/drivers/i2c/busses/i2c-hydra.c
+++ b/drivers/i2c/busses/i2c-hydra.c
@@ -27,7 +27,6 @@
#include <linux/types.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
-#include <linux/init.h>
#include <linux/io.h>
#include <asm/hydra.h>
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index f7444100f397..274312c96b12 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -36,7 +36,6 @@
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/slab.h>
-#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/irq.h>
#include <linux/io.h>
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index dd24aa0424a9..3d16c2f60a5e 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -34,7 +34,6 @@
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/slab.h>
-#include <linux/init.h>
#include <linux/errno.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c
index af213045ab7e..cf99dbf21fd1 100644
--- a/drivers/i2c/busses/i2c-isch.c
+++ b/drivers/i2c/busses/i2c-isch.c
@@ -33,7 +33,6 @@
#include <linux/stddef.h>
#include <linux/ioport.h>
#include <linux/i2c.h>
-#include <linux/init.h>
#include <linux/io.h>
#include <linux/acpi.h>
diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index bb132ea7d2b4..8ce4f517fc56 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -62,7 +62,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index b6a741caf4f6..f5391633b53a 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -16,7 +16,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/sched.h>
-#include <linux/init.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index ac88f4000cc2..0038c451095c 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -51,7 +51,6 @@
#include <linux/kernel.h>
#include <linux/stddef.h>
#include <linux/ioport.h>
-#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/dmi.h>
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index c61f37a10a07..80e06fa45720 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -15,7 +15,6 @@
#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/errno.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c
index b929ba271b47..81042b08a947 100644
--- a/drivers/i2c/busses/i2c-octeon.c
+++ b/drivers/i2c/busses/i2c-octeon.c
@@ -18,7 +18,6 @@
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/io.h>
#include <linux/of.h>
diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index 39e2755e3f25..845f12598e79 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -12,7 +12,6 @@
*/
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index a028617b8f13..39dd8ec60dfd 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -22,7 +22,7 @@
Intel PIIX4, 440MX
Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100
ATI IXP200, IXP300, IXP400, SB600, SB700/SP5100, SB800
- AMD Hudson-2, CZ
+ AMD Hudson-2, ML, CZ
SMSC Victory66
Note: we assume there can only be one device, with one or more
@@ -38,7 +38,6 @@
#include <linux/ioport.h>
#include <linux/i2c.h>
#include <linux/slab.h>
-#include <linux/init.h>
#include <linux/dmi.h>
#include <linux/acpi.h>
#include <linux/io.h>
@@ -208,16 +207,16 @@ static int piix4_setup(struct pci_dev *PIIX4_dev,
"WARNING: SMBus interface has been FORCEFULLY ENABLED!\n");
} else {
dev_err(&PIIX4_dev->dev,
- "Host SMBus controller not enabled!\n");
+ "SMBus Host Controller not enabled!\n");
release_region(piix4_smba, SMBIOSIZE);
return -ENODEV;
}
}
if (((temp & 0x0E) == 8) || ((temp & 0x0E) == 2))
- dev_dbg(&PIIX4_dev->dev, "Using Interrupt 9 for SMBus.\n");
+ dev_dbg(&PIIX4_dev->dev, "Using IRQ for SMBus\n");
else if ((temp & 0x0E) == 0)
- dev_dbg(&PIIX4_dev->dev, "Using Interrupt SMI# for SMBus.\n");
+ dev_dbg(&PIIX4_dev->dev, "Using SMI# for SMBus\n");
else
dev_err(&PIIX4_dev->dev, "Illegal Interrupt configuration "
"(or code out of date)!\n");
@@ -235,7 +234,8 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
{
unsigned short piix4_smba;
unsigned short smba_idx = 0xcd6;
- u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en;
+ u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status;
+ u8 i2ccfg, i2ccfg_offset = 0x10;
/* SB800 and later SMBus does not support forcing address */
if (force || force_addr) {
@@ -245,7 +245,15 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
}
/* Determine the address of the SMBus areas */
- smb_en = (aux) ? 0x28 : 0x2c;
+ if ((PIIX4_dev->vendor == PCI_VENDOR_ID_AMD &&
+ PIIX4_dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS &&
+ PIIX4_dev->revision >= 0x41) ||
+ (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD &&
+ PIIX4_dev->device == 0x790b &&
+ PIIX4_dev->revision >= 0x49))
+ smb_en = 0x00;
+ else
+ smb_en = (aux) ? 0x28 : 0x2c;
if (!request_region(smba_idx, 2, "smba_idx")) {
dev_err(&PIIX4_dev->dev, "SMBus base address index region "
@@ -258,13 +266,22 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
smba_en_hi = inb_p(smba_idx + 1);
release_region(smba_idx, 2);
- if ((smba_en_lo & 1) == 0) {
+ if (!smb_en) {
+ smb_en_status = smba_en_lo & 0x10;
+ piix4_smba = smba_en_hi << 8;
+ if (aux)
+ piix4_smba |= 0x20;
+ } else {
+ smb_en_status = smba_en_lo & 0x01;
+ piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
+ }
+
+ if (!smb_en_status) {
dev_err(&PIIX4_dev->dev,
- "Host SMBus controller not enabled!\n");
+ "SMBus Host Controller not enabled!\n");
return -ENODEV;
}
- piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
return -ENODEV;
@@ -277,7 +294,8 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
/* Aux SMBus does not support IRQ information */
if (aux) {
dev_info(&PIIX4_dev->dev,
- "SMBus Host Controller at 0x%x\n", piix4_smba);
+ "Auxiliary SMBus Host Controller at 0x%x\n",
+ piix4_smba);
return piix4_smba;
}
@@ -292,9 +310,9 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
release_region(piix4_smba + i2ccfg_offset, 1);
if (i2ccfg & 1)
- dev_dbg(&PIIX4_dev->dev, "Using IRQ for SMBus.\n");
+ dev_dbg(&PIIX4_dev->dev, "Using IRQ for SMBus\n");
else
- dev_dbg(&PIIX4_dev->dev, "Using SMI# for SMBus.\n");
+ dev_dbg(&PIIX4_dev->dev, "Using SMI# for SMBus\n");
dev_info(&PIIX4_dev->dev,
"SMBus Host Controller at 0x%x, revision %d\n",
diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c
index f6389e2c9d02..8564768fee32 100644
--- a/drivers/i2c/busses/i2c-pmcmsp.c
+++ b/drivers/i2c/busses/i2c-pmcmsp.c
@@ -26,7 +26,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 8c87f4a9793b..01e967763c2a 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -24,7 +24,6 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/i2c.h>
-#include <linux/init.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/of_irq.h>
diff --git a/drivers/i2c/busses/i2c-puv3.c b/drivers/i2c/busses/i2c-puv3.c
index ac80199885be..c83fc3ccdd2b 100644
--- a/drivers/i2c/busses/i2c-puv3.c
+++ b/drivers/i2c/busses/i2c-puv3.c
@@ -17,7 +17,6 @@
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/i2c.h>
-#include <linux/init.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/io.h>
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 2c2fd7c2b116..0282d4d42805 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -26,7 +26,6 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
-#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/i2c.h>
@@ -111,6 +110,7 @@ struct rcar_i2c_priv {
void __iomem *io;
struct i2c_adapter adap;
struct i2c_msg *msg;
+ struct clk *clk;
spinlock_t lock;
wait_queue_head_t wait;
@@ -227,18 +227,12 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv,
u32 bus_speed,
struct device *dev)
{
- struct clk *clkp = clk_get(dev, NULL);
u32 scgd, cdf;
u32 round, ick;
u32 scl;
u32 cdf_width;
unsigned long rate;
- if (IS_ERR(clkp)) {
- dev_err(dev, "couldn't get clock\n");
- return PTR_ERR(clkp);
- }
-
switch (priv->devtype) {
case I2C_RCAR_GEN1:
cdf_width = 2;
@@ -266,7 +260,7 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv,
* clkp : peripheral_clk
* F[] : integer up-valuation
*/
- rate = clk_get_rate(clkp);
+ rate = clk_get_rate(priv->clk);
cdf = rate / 20000000;
if (cdf >= 1 << cdf_width) {
dev_err(dev, "Input clock %lu too high\n", rate);
@@ -308,7 +302,7 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv,
scgd_find:
dev_dbg(dev, "clk %d/%d(%lu), round %u, CDF:0x%x, SCGD: 0x%x\n",
- scl, bus_speed, clk_get_rate(clkp), round, cdf, scgd);
+ scl, bus_speed, clk_get_rate(priv->clk), round, cdf, scgd);
/*
* keep icccr value
@@ -604,7 +598,7 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
* error handling
*/
if (rcar_i2c_flags_has(priv, ID_NACK)) {
- ret = -EREMOTEIO;
+ ret = -ENXIO;
break;
}
@@ -623,7 +617,7 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
pm_runtime_put(dev);
- if (ret < 0)
+ if (ret < 0 && ret != -ENXIO)
dev_err(dev, "error %d : %x\n", ret, priv->flags);
return ret;
@@ -664,6 +658,12 @@ static int rcar_i2c_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ priv->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(priv->clk)) {
+ dev_err(dev, "cannot get clock\n");
+ return PTR_ERR(priv->clk);
+ }
+
bus_speed = 100000; /* default 100 kHz */
ret = of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed);
if (ret < 0 && pdata && pdata->bus_speed)
diff --git a/drivers/i2c/busses/i2c-scmi.c b/drivers/i2c/busses/i2c-scmi.c
index 599235514138..dfc98df7b1b6 100644
--- a/drivers/i2c/busses/i2c-scmi.c
+++ b/drivers/i2c/busses/i2c-scmi.c
@@ -12,7 +12,6 @@
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
-#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/acpi.h>
diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c
index 5e8f136e233f..d76f3d9737ec 100644
--- a/drivers/i2c/busses/i2c-sh7760.c
+++ b/drivers/i2c/busses/i2c-sh7760.c
@@ -11,7 +11,6 @@
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/i2c.h>
-#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
diff --git a/drivers/i2c/busses/i2c-simtec.c b/drivers/i2c/busses/i2c-simtec.c
index 4fc87e7c94c9..294c80f21d65 100644
--- a/drivers/i2c/busses/i2c-simtec.c
+++ b/drivers/i2c/busses/i2c-simtec.c
@@ -20,7 +20,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index 36a9556d7cfa..19b8505d0cdd 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -45,7 +45,6 @@
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/ioport.h>
-#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/acpi.h>
#include <linux/io.h>
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index b9faf9b6002b..f8aa0c29f02b 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -36,7 +36,6 @@
#include <linux/stddef.h>
#include <linux/ioport.h>
#include <linux/i2c.h>
-#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/io.h>
diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c
index be662511c58b..49d7f14b9d27 100644
--- a/drivers/i2c/busses/i2c-via.c
+++ b/drivers/i2c/busses/i2c-via.c
@@ -22,7 +22,6 @@
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/ioport.h>
-#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <linux/io.h>
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 6f9918f37b91..28107502517f 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -30,7 +30,6 @@
*/
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/delay.h>
diff --git a/drivers/i2c/busses/i2c-xlr.c b/drivers/i2c/busses/i2c-xlr.c
index 7945b05d3ea0..17f7352eca6b 100644
--- a/drivers/i2c/busses/i2c-xlr.c
+++ b/drivers/i2c/busses/i2c-xlr.c
@@ -11,7 +11,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
-#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/errno.h>
diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c
index ae1258b95d60..8eadf0f47ad7 100644
--- a/drivers/i2c/busses/scx200_i2c.c
+++ b/drivers/i2c/busses/scx200_i2c.c
@@ -26,7 +26,6 @@
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <linux/io.h>
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 82f7a5354dfe..5fb80b8962a2 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -261,10 +261,9 @@ static int i2c_device_probe(struct device *dev)
acpi_dev_pm_attach(&client->dev, true);
status = driver->probe(client, i2c_match_id(driver->id_table, client));
- if (status) {
- i2c_set_clientdata(client, NULL);
+ if (status)
acpi_dev_pm_detach(&client->dev, true);
- }
+
return status;
}
@@ -272,7 +271,7 @@ static int i2c_device_remove(struct device *dev)
{
struct i2c_client *client = i2c_verify_client(dev);
struct i2c_driver *driver;
- int status;
+ int status = 0;
if (!client || !dev->driver)
return 0;
@@ -281,12 +280,8 @@ static int i2c_device_remove(struct device *dev)
if (driver->remove) {
dev_dbg(dev, "remove\n");
status = driver->remove(client);
- } else {
- dev->driver = NULL;
- status = 0;
}
- if (status == 0)
- i2c_set_clientdata(client, NULL);
+
acpi_dev_pm_detach(&client->dev, true);
return status;
}
diff --git a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
index c58e093b6032..69afffa8f427 100644
--- a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
+++ b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
@@ -19,7 +19,6 @@
#include <linux/kernel.h>
#include <linux/i2c.h>
#include <linux/i2c-mux.h>
-#include <linux/init.h>
#include <linux/module.h>
#include <linux/of_gpio.h>
#include <linux/platform_device.h>
diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c
index 8a8c56f4b026..d8989c823f50 100644
--- a/drivers/i2c/muxes/i2c-mux-gpio.c
+++ b/drivers/i2c/muxes/i2c-mux-gpio.c
@@ -12,7 +12,6 @@
#include <linux/i2c-mux.h>
#include <linux/i2c-mux-gpio.h>
#include <linux/platform_device.h>
-#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/gpio.h>
diff --git a/drivers/i2c/muxes/i2c-mux-pca9541.c b/drivers/i2c/muxes/i2c-mux-pca9541.c
index c4f08ad31183..cb772775da43 100644
--- a/drivers/i2c/muxes/i2c-mux-pca9541.c
+++ b/drivers/i2c/muxes/i2c-mux-pca9541.c
@@ -17,7 +17,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/jiffies.h>
#include <linux/delay.h>
#include <linux/slab.h>
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index 8720b6a11237..550bd36aa5d6 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -40,7 +40,6 @@
#include <linux/i2c.h>
#include <linux/i2c-mux.h>
#include <linux/i2c/pca954x.h>
-#include <linux/init.h>
#include <linux/module.h>
#include <linux/of_gpio.h>
#include <linux/slab.h>
diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c
index d7978dc4ad0b..4ff0ef3e07a6 100644
--- a/drivers/i2c/muxes/i2c-mux-pinctrl.c
+++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c
@@ -18,7 +18,6 @@
#include <linux/i2c.h>
#include <linux/i2c-mux.h>
-#include <linux/init.h>
#include <linux/module.h>
#include <linux/pinctrl/consumer.h>
#include <linux/i2c-mux-pinctrl.h>
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index d9c8dbd3373f..deddeb8c337c 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -342,11 +342,25 @@ i2c_register_board_info(int busnum, struct i2c_board_info const *info,
}
#endif /* I2C_BOARDINFO */
-/*
+/**
+ * struct i2c_algorithm - represent I2C transfer method
+ * @master_xfer: Issue a set of i2c transactions to the given I2C adapter
+ * defined by the msgs array, with num messages available to transfer via
+ * the adapter specified by adap.
+ * @smbus_xfer: Issue smbus transactions to the given I2C adapter. If this
+ * is not present, then the bus layer will try and convert the SMBus calls
+ * into I2C transfers instead.
+ * @functionality: Return the flags that this algorithm/adapter pair supports
+ * from the I2C_FUNC_* flags.
+ *
* The following structs are for those who like to implement new bus drivers:
* i2c_algorithm is the interface to a class of hardware solutions which can
* be addressed using the same bus algorithms - i.e. bit-banging or the PCF8584
* to name two of the most common.
+ *
+ * The return codes from the @master_xfer field should indicate the type of
+ * error code that occured during the transfer, as documented in the kernel
+ * Documentation file Documentation/i2c/fault-codes.
*/
struct i2c_algorithm {
/* If an adapter algorithm can't do I2C-level access, set master_xfer