Merge branch 'next' into for-linus

Conflicts:
	include/linux/input.h

63 files changed, 3201 insertions, 753 deletions

diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index 22edcbb9ddaf..35447e081736 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -304,6 +304,10 @@ X!Idrivers/video/console/fonts.c
 !Edrivers/input/ff-core.c
 !Edrivers/input/ff-memless.c
      </sect1>
+     <sect1><title>Multitouch Library</title>
+!Iinclude/linux/input/mt.h
+!Edrivers/input/input-mt.c
+     </sect1>
      <sect1><title>Polled input devices</title>
 !Iinclude/linux/input-polldev.h
 !Edrivers/input/input-polldev.c
diff --git a/Documentation/input/cma3000_d0x.txt b/Documentation/input/cma3000_d0x.txt
new file mode 100644
index 000000000000..29d088db4afd
--- /dev/null
+++ b/Documentation/input/cma3000_d0x.txt
@@ -0,0 +1,115 @@
+Kernel driver for CMA3000-D0x
+============================
+
+Supported chips:
+* VTI CMA3000-D0x
+Datasheet:
+  CMA3000-D0X Product Family Specification 8281000A.02.pdf
+  <http://www.vti.fi/en/>
+
+Author: Hemanth V <hemanthv@ti.com>
+
+
+Description
+-----------
+CMA3000 Tri-axis accelerometer supports Motion detect, Measurement and
+Free fall modes.
+
+Motion Detect Mode: Its the low power mode where interrupts are generated only
+when motion exceeds the defined thresholds.
+
+Measurement Mode: This mode is used to read the acceleration data on X,Y,Z
+axis and supports 400, 100, 40 Hz sample frequency.
+
+Free fall Mode: This mode is intended to save system resources.
+
+Threshold values: Chip supports defining threshold values for above modes
+which includes time and g value. Refer product specifications for more details.
+
+CMA3000 chip supports mutually exclusive I2C and SPI interfaces for
+communication, currently the driver supports I2C based communication only.
+Initial configuration for bus mode is set in non volatile memory and can later
+be modified through bus interface command.
+
+Driver reports acceleration data through input subsystem. It generates ABS_MISC
+event with value 1 when free fall is detected.
+
+Platform data need to be configured for initial default values.
+
+Platform Data
+-------------
+fuzz_x: Noise on X Axis
+
+fuzz_y: Noise on Y Axis
+
+fuzz_z: Noise on Z Axis
+
+g_range: G range in milli g i.e 2000 or 8000
+
+mode: Default Operating mode
+
+mdthr: Motion detect g range threshold value
+
+mdfftmr: Motion detect and free fall time threshold value
+
+ffthr: Free fall g range threshold value
+
+Input Interface
+--------------
+Input driver version is 1.0.0
+Input device ID: bus 0x18 vendor 0x0 product 0x0 version 0x0
+Input device name: "cma3000-accelerometer"
+Supported events:
+  Event type 0 (Sync)
+  Event type 3 (Absolute)
+    Event code 0 (X)
+      Value     47
+      Min    -8000
+      Max     8000
+      Fuzz     200
+    Event code 1 (Y)
+      Value    -28
+      Min    -8000
+      Max     8000
+      Fuzz     200
+    Event code 2 (Z)
+      Value    905
+      Min    -8000
+      Max     8000
+      Fuzz     200
+    Event code 40 (Misc)
+      Value      0
+      Min        0
+      Max        1
+  Event type 4 (Misc)
+
+
+Register/Platform parameters Description
+----------------------------------------
+
+mode:
+	0: power down mode
+	1: 100 Hz Measurement mode
+	2: 400 Hz Measurement mode
+	3: 40 Hz Measurement mode
+	4: Motion Detect mode (default)
+	5: 100 Hz Free fall mode
+	6: 40 Hz Free fall mode
+	7: Power off mode
+
+grange:
+	2000: 2000 mg or 2G Range
+	8000: 8000 mg or 8G Range
+
+mdthr:
+	X: X * 71mg (8G Range)
+	X: X * 18mg (2G Range)
+
+mdfftmr:
+	X: (X & 0x70) * 100 ms (MDTMR)
+	   (X & 0x0F) * 2.5 ms (FFTMR 400 Hz)
+	   (X & 0x0F) * 10 ms  (FFTMR 100 Hz)
+
+ffthr:
+       X: (X >> 2) * 18mg (2G Range)
+       X: (X & 0x0F) * 71 mg (8G Range)
diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt
index bdcba154b83e..71536e78406f 100644
--- a/Documentation/input/multi-touch-protocol.txt
+++ b/Documentation/input/multi-touch-protocol.txt
@@ -1,6 +1,6 @@
 Multi-touch (MT) Protocol
 -------------------------
-	Copyright (C) 2009	Henrik Rydberg <rydberg@euromail.se>
+	Copyright (C) 2009-2010	Henrik Rydberg <rydberg@euromail.se>
 
 
 Introduction
@@ -161,19 +161,24 @@ against the glass. The inner region will increase, and in general, the
 ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller than
 unity, is related to the contact pressure. For pressure-based devices,
 ABS_MT_PRESSURE may be used to provide the pressure on the contact area
-instead.
+instead. Devices capable of contact hovering can use ABS_MT_DISTANCE to
+indicate the distance between the contact and the surface.
 
 In addition to the MAJOR parameters, the oval shape of the contact can be
 described by adding the MINOR parameters, such that MAJOR and MINOR are the
 major and minor axis of an ellipse. Finally, the orientation of the oval
 shape can be describe with the ORIENTATION parameter.
 
+For type A devices, further specification of the touch shape is possible
+via ABS_MT_BLOB_ID.
+
 The ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
-contact or a pen or something else.  Devices with more granular information
-may specify general shapes as blobs, i.e., as a sequence of rectangular
-shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
-that currently support it, the ABS_MT_TRACKING_ID event may be used to
-report contact tracking from hardware [5].
+finger or a pen or something else. Finally, the ABS_MT_TRACKING_ID event
+may be used to track identified contacts over time [5].
+
+In the type B protocol, ABS_MT_TOOL_TYPE and ABS_MT_TRACKING_ID are
+implicitly handled by input core; drivers should instead call
+input_mt_report_slot_state().
 
 
 Event Semantics
@@ -213,6 +218,12 @@ The pressure, in arbitrary units, on the contact area. May be used instead
 of TOUCH and WIDTH for pressure-based devices or any device with a spatial
 signal intensity distribution.
 
+ABS_MT_DISTANCE
+
+The distance, in surface units, between the contact and the surface. Zero
+distance means the contact is touching the surface. A positive number means
+the contact is hovering above the surface.
+
 ABS_MT_ORIENTATION
 
 The orientation of the ellipse. The value should describe a signed quarter
@@ -240,21 +251,24 @@ ABS_MT_TOOL_TYPE
 The type of approaching tool. A lot of kernel drivers cannot distinguish
 between different tool types, such as a finger or a pen. In such cases, the
 event should be omitted. The protocol currently supports MT_TOOL_FINGER and
-MT_TOOL_PEN [2].
+MT_TOOL_PEN [2]. For type B devices, this event is handled by input core;
+drivers should instead use input_mt_report_slot_state().
 
 ABS_MT_BLOB_ID
 
 The BLOB_ID groups several packets together into one arbitrarily shaped
-contact. This is a low-level anonymous grouping for type A devices, and
+contact. The sequence of points forms a polygon which defines the shape of
+the contact. This is a low-level anonymous grouping for type A devices, and
 should not be confused with the high-level trackingID [5]. Most type A
 devices do not have blob capability, so drivers can safely omit this event.
 
 ABS_MT_TRACKING_ID
 
 The TRACKING_ID identifies an initiated contact throughout its life cycle
-[5]. This event is mandatory for type B devices. The value range of the
-TRACKING_ID should be large enough to ensure unique identification of a
-contact maintained over an extended period of time.
+[5]. The value range of the TRACKING_ID should be large enough to ensure
+unique identification of a contact maintained over an extended period of
+time. For type B devices, this event is handled by input core; drivers
+should instead use input_mt_report_slot_state().
 
 
 Event Computation
@@ -301,18 +315,19 @@ and with ORIENTATION, one can detect twisting of fingers.
 Notes
 -----
 
-In order to stay compatible with existing applications, the data
-reported in a finger packet must not be recognized as single-touch
-events. In addition, all finger data must bypass input filtering,
-since subsequent events of the same type refer to different fingers.
+In order to stay compatible with existing applications, the data reported
+in a finger packet must not be recognized as single-touch events.
+
+For type A devices, all finger data bypasses input filtering, since
+subsequent events of the same type refer to different fingers.
 
-The first kernel driver to utilize the MT protocol is the bcm5974 driver,
-where examples can be found.
+For example usage of the type A protocol, see the bcm5974 driver. For
+example usage of the type B protocol, see the hid-egalax driver.
 
 [1] With the extension ABS_MT_APPROACH_X and ABS_MT_APPROACH_Y, the
 difference between the contact position and the approaching tool position
 could be used to derive tilt.
 [2] The list can of course be extended.
-[3] Multitouch X driver project: http://bitmath.org/code/multitouch/.
+[3] The mtdev project: http://bitmath.org/code/mtdev/.
 [4] See the section on event computation.
 [5] See the section on finger tracking.
diff --git a/MAINTAINERS b/MAINTAINERS
index 0094224ca79b..a9d3a1343698 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3020,8 +3020,10 @@ F:	drivers/input/
 INPUT MULTITOUCH (MT) PROTOCOL
 M:	Henrik Rydberg <rydberg@euromail.se>
 L:	linux-input@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rydberg/input-mt.git
 S:	Maintained
 F:	Documentation/input/multi-touch-protocol.txt
+F:	drivers/input/input-mt.c
 K:	\b(ABS|SYN)_MT_
 
 INTEL IDLE DRIVER
diff --git a/arch/arm/plat-spear/include/plat/keyboard.h b/arch/arm/plat-spear/include/plat/keyboard.h
new file mode 100644
index 000000000000..68b5394fc583
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/keyboard.h
@@ -0,0 +1,141 @@
+/*
+ * Copyright (C) 2010 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_KEYBOARD_H
+#define __PLAT_KEYBOARD_H
+
+#include <linux/bitops.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/types.h>
+
+#define DECLARE_KEYMAP(_name) \
+int _name[] = { \
+	KEY(0, 0, KEY_ESC), \
+	KEY(0, 1, KEY_1), \
+	KEY(0, 2, KEY_2), \
+	KEY(0, 3, KEY_3), \
+	KEY(0, 4, KEY_4), \
+	KEY(0, 5, KEY_5), \
+	KEY(0, 6, KEY_6), \
+	KEY(0, 7, KEY_7), \
+	KEY(0, 8, KEY_8), \
+	KEY(1, 0, KEY_9), \
+	KEY(1, 1, KEY_MINUS), \
+	KEY(1, 2, KEY_EQUAL), \
+	KEY(1, 3, KEY_BACKSPACE), \
+	KEY(1, 4, KEY_TAB), \
+	KEY(1, 5, KEY_Q), \
+	KEY(1, 6, KEY_W), \
+	KEY(1, 7, KEY_E), \
+	KEY(1, 8, KEY_R), \
+	KEY(2, 0, KEY_T), \
+	KEY(2, 1, KEY_Y), \
+	KEY(2, 2, KEY_U), \
+	KEY(2, 3, KEY_I), \
+	KEY(2, 4, KEY_O), \
+	KEY(2, 5, KEY_P), \
+	KEY(2, 6, KEY_LEFTBRACE), \
+	KEY(2, 7, KEY_RIGHTBRACE), \
+	KEY(2, 8, KEY_ENTER), \
+	KEY(3, 0, KEY_LEFTCTRL), \
+	KEY(3, 1, KEY_A), \
+	KEY(3, 2, KEY_S), \
+	KEY(3, 3, KEY_D), \
+	KEY(3, 4, KEY_F), \
+	KEY(3, 5, KEY_G), \
+	KEY(3, 6, KEY_H), \
+	KEY(3, 7, KEY_J), \
+	KEY(3, 8, KEY_K), \
+	KEY(4, 0, KEY_L), \
+	KEY(4, 1, KEY_SEMICOLON), \
+	KEY(4, 2, KEY_APOSTROPHE), \
+	KEY(4, 3, KEY_GRAVE), \
+	KEY(4, 4, KEY_LEFTSHIFT), \
+	KEY(4, 5, KEY_BACKSLASH), \
+	KEY(4, 6, KEY_Z), \
+	KEY(4, 7, KEY_X), \
+	KEY(4, 8, KEY_C), \
+	KEY(4, 0, KEY_L), \
+	KEY(4, 1, KEY_SEMICOLON), \
+	KEY(4, 2, KEY_APOSTROPHE), \
+	KEY(4, 3, KEY_GRAVE), \
+	KEY(4, 4, KEY_LEFTSHIFT), \
+	KEY(4, 5, KEY_BACKSLASH), \
+	KEY(4, 6, KEY_Z), \
+	KEY(4, 7, KEY_X), \
+	KEY(4, 8, KEY_C), \
+	KEY(4, 0, KEY_L), \
+	KEY(4, 1, KEY_SEMICOLON), \
+	KEY(4, 2, KEY_APOSTROPHE), \
+	KEY(4, 3, KEY_GRAVE), \
+	KEY(4, 4, KEY_LEFTSHIFT), \
+	KEY(4, 5, KEY_BACKSLASH), \
+	KEY(4, 6, KEY_Z), \
+	KEY(4, 7, KEY_X), \
+	KEY(4, 8, KEY_C), \
+	KEY(5, 0, KEY_V), \
+	KEY(5, 1, KEY_B), \
+	KEY(5, 2, KEY_N), \
+	KEY(5, 3, KEY_M), \
+	KEY(5, 4, KEY_COMMA), \
+	KEY(5, 5, KEY_DOT), \
+	KEY(5, 6, KEY_SLASH), \
+	KEY(5, 7, KEY_RIGHTSHIFT), \
+	KEY(5, 8, KEY_KPASTERISK), \
+	KEY(6, 0, KEY_LEFTALT), \
+	KEY(6, 1, KEY_SPACE), \
+	KEY(6, 2, KEY_CAPSLOCK), \
+	KEY(6, 3, KEY_F1), \
+	KEY(6, 4, KEY_F2), \
+	KEY(6, 5, KEY_F3), \
+	KEY(6, 6, KEY_F4), \
+	KEY(6, 7, KEY_F5), \
+	KEY(6, 8, KEY_F6), \
+	KEY(7, 0, KEY_F7), \
+	KEY(7, 1, KEY_F8), \
+	KEY(7, 2, KEY_F9), \
+	KEY(7, 3, KEY_F10), \
+	KEY(7, 4, KEY_NUMLOCK), \
+	KEY(7, 5, KEY_SCROLLLOCK), \
+	KEY(7, 6, KEY_KP7), \
+	KEY(7, 7, KEY_KP8), \
+	KEY(7, 8, KEY_KP9), \
+	KEY(8, 0, KEY_KPMINUS), \
+	KEY(8, 1, KEY_KP4), \
+	KEY(8, 2, KEY_KP5), \
+	KEY(8, 3, KEY_KP6), \
+	KEY(8, 4, KEY_KPPLUS), \
+	KEY(8, 5, KEY_KP1), \
+	KEY(8, 6, KEY_KP2), \
+	KEY(8, 7, KEY_KP3), \
+	KEY(8, 8, KEY_KP0), \
+}
+
+/**
+ * struct kbd_platform_data - spear keyboard platform data
+ * keymap: pointer to keymap data (table and size)
+ * rep: enables key autorepeat
+ *
+ * This structure is supposed to be used by platform code to supply
+ * keymaps to drivers that implement keyboards.
+ */
+struct kbd_platform_data {
+	const struct matrix_keymap_data *keymap;
+	bool rep;
+};
+
+/* This function is used to set platform data field of pdev->dev */
+static inline void
+kbd_set_plat_data(struct platform_device *pdev, struct kbd_platform_data *data)
+{
+	pdev->dev.platform_data = data;
+}
+
+#endif /* __PLAT_KEYBOARD_H */
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 3052e2969ad0..401acecc7f32 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -154,7 +154,8 @@ config HID_EGALAX
 	tristate "eGalax multi-touch panel"
 	depends on USB_HID
 	---help---
-	Support for the eGalax dual-touch panel.
+	Support for the eGalax dual-touch panels, including the
+	Joojoo and Wetab tablets.
 
 config HID_ELECOM
 	tristate "ELECOM BM084 bluetooth mouse"
diff --git a/drivers/hid/hid-3m-pct.c b/drivers/hid/hid-3m-pct.c
index 02d8cd3b1b1b..4fb7c7528d16 100644
--- a/drivers/hid/hid-3m-pct.c
+++ b/drivers/hid/hid-3m-pct.c
@@ -19,6 +19,7 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/usb.h>
+#include <linux/input/mt.h>
 
 MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
 MODULE_DESCRIPTION("3M PCT multitouch panels");
@@ -27,8 +28,6 @@ MODULE_LICENSE("GPL");
 #include "hid-ids.h"
 
 #define MAX_SLOTS		60
-#define MAX_TRKID		USHRT_MAX
-#define MAX_EVENTS		360
 
 /* estimated signal-to-noise ratios */
 #define SN_MOVE			2048
@@ -36,14 +35,11 @@ MODULE_LICENSE("GPL");
 
 struct mmm_finger {
 	__s32 x, y, w, h;
-	__u16 id;
-	bool prev_touch;
 	bool touch, valid;
 };
 
 struct mmm_data {
 	struct mmm_finger f[MAX_SLOTS];
-	__u16 id;
 	__u8 curid;
 	__u8 nexp, nreal;
 	bool touch, valid;
@@ -117,14 +113,7 @@ static int mmm_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 					0, 1, 0, 0);
 			return 1;
 		case HID_DG_CONTACTID:
-			field->logical_maximum = MAX_TRKID;
-			hid_map_usage(hi, usage, bit, max,
-					EV_ABS, ABS_MT_TRACKING_ID);
-			input_set_abs_params(hi->input, ABS_MT_TRACKING_ID,
-					     0, MAX_TRKID, 0, 0);
-			if (!hi->input->mt)
-				input_mt_create_slots(hi->input, MAX_SLOTS);
-			input_set_events_per_packet(hi->input, MAX_EVENTS);
+			input_mt_init_slots(hi->input, MAX_SLOTS);
 			return 1;
 		}
 		/* let hid-input decide for the others */
@@ -154,7 +143,6 @@ static int mmm_input_mapped(struct hid_device *hdev, struct hid_input *hi,
  */
 static void mmm_filter_event(struct mmm_data *md, struct input_dev *input)
 {
-	struct mmm_finger *oldest = 0;
 	int i;
 	for (i = 0; i < MAX_SLOTS; ++i) {
 		struct mmm_finger *f = &md->f[i];
@@ -163,6 +151,7 @@ static void mmm_filter_event(struct mmm_data *md, struct input_dev *input)
 			continue;
 		}
 		input_mt_slot(input, i);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, f->touch);
 		if (f->touch) {
 			/* this finger is on the screen */
 			int wide = (f->w > f->h);
@@ -170,33 +159,16 @@ static void mmm_filter_event(struct mmm_data *md, struct input_dev *input)
 			int major = max(f->w, f->h) >> 1;
 			int minor = min(f->w, f->h) >> 1;
 
-			if (!f->prev_touch)
-				f->id = md->id++;
-			input_event(input, EV_ABS, ABS_MT_TRACKING_ID, f->id);
 			input_event(input, EV_ABS, ABS_MT_POSITION_X, f->x);
 			input_event(input, EV_ABS, ABS_MT_POSITION_Y, f->y);
 			input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide);
 			input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, major);
 			input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, minor);
-			/* touchscreen emulation: pick the oldest contact */
-			if (!oldest || ((f->id - oldest->id) & (SHRT_MAX + 1)))
-				oldest = f;
-		} else {
-			/* this finger took off the screen */
-			input_event(input, EV_ABS, ABS_MT_TRACKING_ID, -1);
 		}
-		f->prev_touch = f->touch;
 		f->valid = 0;
 	}
 
-	/* touchscreen emulation */
-	if (oldest) {
-		input_event(input, EV_KEY, BTN_TOUCH, 1);
-		input_event(input, EV_ABS, ABS_X, oldest->x);
-		input_event(input, EV_ABS, ABS_Y, oldest->y);
-	} else {
-		input_event(input, EV_KEY, BTN_TOUCH, 0);
-	}
+	input_mt_report_pointer_emulation(input, true);
 	input_sync(input);
 }
 
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 515345b11ac9..88668ae96945 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1300,6 +1300,9 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH2) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH3) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH4) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
diff --git a/drivers/hid/hid-egalax.c b/drivers/hid/hid-egalax.c
index 54b017ad258d..16566fcc08a3 100644
--- a/drivers/hid/hid-egalax.c
+++ b/drivers/hid/hid-egalax.c
@@ -2,6 +2,8 @@
  *  HID driver for eGalax dual-touch panels
  *
  *  Copyright (c) 2010 Stephane Chatty <chatty@enac.fr>
+ *  Copyright (c) 2010 Henrik Rydberg <rydberg@euromail.se>
+ *  Copyright (c) 2010 Canonical, Ltd.
  *
  */
 
@@ -16,6 +18,7 @@
 #include <linux/hid.h>
 #include <linux/module.h>
 #include <linux/usb.h>
+#include <linux/input/mt.h>
 #include <linux/slab.h>
 #include "usbhid/usbhid.h"
 
@@ -25,38 +28,53 @@ MODULE_LICENSE("GPL");
 
 #include "hid-ids.h"
 
+#define MAX_SLOTS		2
+
+/* estimated signal-to-noise ratios */
+#define SN_MOVE			4096
+#define SN_PRESSURE		32
+
 struct egalax_data {
-	__u16 x, y, z;
-	__u8 id;
-	bool first;		/* is this the first finger in the frame? */
-	bool valid;		/* valid finger data, or just placeholder? */
-	bool activity;		/* at least one active finger previously? */
-	__u16 lastx, lasty, lastz;	/* latest valid (x, y, z) in the frame */
+	int valid;
+	int slot;
+	int touch;
+	int x, y, z;
 };
 
+static void set_abs(struct input_dev *input, unsigned int code,
+		    struct hid_field *field, int snratio)
+{
+	int fmin = field->logical_minimum;
+	int fmax = field->logical_maximum;
+	int fuzz = snratio ? (fmax - fmin) / snratio : 0;
+	input_set_abs_params(input, code, fmin, fmax, fuzz, 0);
+}
+
 static int egalax_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 		struct hid_field *field, struct hid_usage *usage,
 		unsigned long **bit, int *max)
 {
+	struct input_dev *input = hi->input;
+
 	switch (usage->hid & HID_USAGE_PAGE) {
 
 	case HID_UP_GENDESK:
 		switch (usage->hid) {
 		case HID_GD_X:
+			field->logical_maximum = 32760;
 			hid_map_usage(hi, usage, bit, max,
 					EV_ABS, ABS_MT_POSITION_X);
+			set_abs(input, ABS_MT_POSITION_X, field, SN_MOVE);
 			/* touchscreen emulation */
-			input_set_abs_params(hi->input, ABS_X,
-						field->logical_minimum,
-						field->logical_maximum, 0, 0);
+			set_abs(input, ABS_X, field, SN_MOVE);
 			return 1;
 		case HID_GD_Y:
+			field->logical_maximum = 32760;
 			hid_map_usage(hi, usage, bit, max,
 					EV_ABS, ABS_MT_POSITION_Y);
+			set_abs(input, ABS_MT_POSITION_Y, field, SN_MOVE);
 			/* touchscreen emulation */
-			input_set_abs_params(hi->input, ABS_Y,
-						field->logical_minimum,
-						field->logical_maximum, 0, 0);
+			set_abs(input, ABS_Y, field, SN_MOVE);
 			return 1;
 		}
 		return 0;
@@ -66,6 +84,7 @@ static int egalax_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 		case HID_DG_TIPSWITCH:
 			/* touchscreen emulation */
 			hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
+			input_set_capability(input, EV_KEY, BTN_TOUCH);
 			return 1;
 		case HID_DG_INRANGE:
 		case HID_DG_CONFIDENCE:
@@ -73,16 +92,15 @@ static int egalax_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 		case HID_DG_CONTACTMAX:
 			return -1;
 		case HID_DG_CONTACTID:
-			hid_map_usage(hi, usage, bit, max,
-					EV_ABS, ABS_MT_TRACKING_ID);
+			input_mt_init_slots(input, MAX_SLOTS);
 			return 1;
 		case HID_DG_TIPPRESSURE:
+			field->logical_minimum = 0;
 			hid_map_usage(hi, usage, bit, max,
 					EV_ABS, ABS_MT_PRESSURE);
+			set_abs(input, ABS_MT_PRESSURE, field, SN_PRESSURE);
 			/* touchscreen emulation */
-			input_set_abs_params(hi->input, ABS_PRESSURE,
-						field->logical_minimum,
-						field->logical_maximum, 0, 0);
+			set_abs(input, ABS_PRESSURE, field, SN_PRESSURE);
 			return 1;
 		}
 		return 0;
@@ -96,10 +114,10 @@ static int egalax_input_mapped(struct hid_device *hdev, struct hid_input *hi,
 		struct hid_field *field, struct hid_usage *usage,
 		unsigned long **bit, int *max)
 {
+	/* tell hid-input to skip setup of these event types */
 	if (usage->type == EV_KEY || usage->type == EV_ABS)
-		clear_bit(usage->code, *bit);
-
-	return 0;
+		set_bit(usage->type, hi->input->evbit);
+	return -1;
 }
 
 /*
@@ -108,58 +126,16 @@ static int egalax_input_mapped(struct hid_device *hdev, struct hid_input *hi,
  */
 static void egalax_filter_event(struct egalax_data *td, struct input_dev *input)
 {
-	td->first = !td->first; /* touchscreen emulation */
-
-	if (td->valid) {
-		/* emit multitouch events */
-		input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id);
-		input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x >> 3);
-		input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y >> 3);
+	input_mt_slot(input, td->slot);
+	input_mt_report_slot_state(input, MT_TOOL_FINGER, td->touch);
+	if (td->touch) {
+		input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x);
+		input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y);
 		input_event(input, EV_ABS, ABS_MT_PRESSURE, td->z);
-
-		input_mt_sync(input);
-
-		/*
-		 * touchscreen emulation: store (x, y) as
-		 * the last valid values in this frame
-		 */
-		td->lastx = td->x;
-		td->lasty = td->y;
-		td->lastz = td->z;
-	}
-
-	/*
-	 * touchscreen emulation: if this is the second finger and at least
-	 * one in this frame is valid, the latest valid in the frame is
-	 * the oldest on the panel, the one we want for single touch
-	 */
-	if (!td->first && td->activity) {
-		input_event(input, EV_ABS, ABS_X, td->lastx >> 3);
-		input_event(input, EV_ABS, ABS_Y, td->lasty >> 3);
- 		input_event(input, EV_ABS, ABS_PRESSURE, td->lastz);
-	}
-
-	if (!td->valid) {
-		/*
-		 * touchscreen emulation: if the first finger is invalid
-		 * and there previously was finger activity, this is a release
-		 */ 
-		if (td->first && td->activity) {
-			input_event(input, EV_KEY, BTN_TOUCH, 0);
-			td->activity = false;
-		}
-		return;
-	}
-
-
-	/* touchscreen emulation: if no previous activity, emit touch event */
-	if (!td->activity) {
-		input_event(input, EV_KEY, BTN_TOUCH, 1);
-		td->activity = true;
 	}
+	input_mt_report_pointer_emulation(input, true);
 }
 
-
 static int egalax_event(struct hid_device *hid, struct hid_field *field,
 				struct hid_usage *usage, __s32 value)
 {
@@ -169,25 +145,26 @@ static int egalax_event(struct hid_device *hid, struct hid_field *field,
 	 * uses a standard parallel multitouch protocol (product ID ==
 	 * 48xx).  The second is capacitive and uses an unusual "serial"
 	 * protocol with a different message for each multitouch finger
-	 * (product ID == 72xx).  We do not yet generate a correct event
-	 * sequence for the capacitive/serial protocol.
+	 * (product ID == 72xx).
 	 */
 	if (hid->claimed & HID_CLAIMED_INPUT) {
 		struct input_dev *input = field->hidinput->input;
 
 		switch (usage->hid) {
 		case HID_DG_INRANGE:
+			td->valid = value;
+			break;
 		case HID_DG_CONFIDENCE:
 			/* avoid interference from generic hidinput handling */
 			break;
 		case HID_DG_TIPSWITCH:
-			td->valid = value;
+			td->touch = value;
 			break;
 		case HID_DG_TIPPRESSURE:
 			td->z = value;
 			break;
 		case HID_DG_CONTACTID:
-			td->id = value;
+			td->slot = clamp_val(value, 0, MAX_SLOTS - 1);
 			break;
 		case HID_GD_X:
 			td->x = value;
@@ -195,11 +172,11 @@ static int egalax_event(struct hid_device *hid, struct hid_field *field,
 		case HID_GD_Y:
 			td->y = value;
 			/* this is the last field in a finger */
-			egalax_filter_event(td, input);
+			if (td->valid)
+				egalax_filter_event(td, input);
 			break;
 		case HID_DG_CONTACTCOUNT:
 			/* touch emulation: this is the last field in a frame */
-			td->first = false;
 			break;
 
 		default:
@@ -261,6 +238,12 @@ static const struct hid_device_id egalax_devices[] = {
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH2) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH3) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH4) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, egalax_devices);
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 3341baa86a30..0f150c72da7b 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -196,6 +196,9 @@
 #define USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER	0x0001
 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH	0x480d
 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1	0x720c
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH2	0x72a1
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH3	0x480e
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH4	0x726b
 
 #define USB_VENDOR_ID_ELECOM		0x056e
 #define USB_DEVICE_ID_ELECOM_BM084	0x0061
diff --git a/drivers/input/Makefile b/drivers/input/Makefile
index 7ad212d31f99..09614ce74961 100644
--- a/drivers/input/Makefile
+++ b/drivers/input/Makefile
@@ -5,7 +5,7 @@
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_INPUT)		+= input-core.o
-input-core-objs := input.o input-compat.o ff-core.o
+input-core-y := input.o input-compat.o input-mt.o ff-core.o
 
 obj-$(CONFIG_INPUT_FF_MEMLESS)	+= ff-memless.o
 obj-$(CONFIG_INPUT_POLLDEV)	+= input-polldev.o
diff --git a/drivers/input/apm-power.c b/drivers/input/apm-power.c
index 7d61a9660806..e90ee3d30613 100644
--- a/drivers/input/apm-power.c
+++ b/drivers/input/apm-power.c
@@ -9,6 +9,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/input.h>
 #include <linux/slab.h>
@@ -23,8 +25,7 @@ static void system_power_event(unsigned int keycode)
 	switch (keycode) {
 	case KEY_SUSPEND:
 		apm_queue_event(APM_USER_SUSPEND);
-
-		printk(KERN_INFO "apm-power: Requesting system suspend...\n");
+		pr_info("Requesting system suspend...\n");
 		break;
 	default:
 		break;
@@ -65,18 +66,15 @@ static int apmpower_connect(struct input_handler *handler,
 
 	error = input_register_handle(handle);
 	if (error) {
-		printk(KERN_ERR
-			"apm-power: Failed to register input power handler, "
-			"error %d\n", error);
+		pr_err("Failed to register input power handler, error %d\n",
+		       error);
 		kfree(handle);
 		return error;
 	}
 
 	error = input_open_device(handle);
 	if (error) {
-		printk(KERN_ERR
-			"apm-power: Failed to open input power device, "
-			"error %d\n", error);
+		pr_err("Failed to open input power device, error %d\n", error);
 		input_unregister_handle(handle);
 		kfree(handle);
 		return error;
diff --git a/drivers/input/evbug.c b/drivers/input/evbug.c
index f7c5c14ec12a..cd4e6679d61a 100644
--- a/drivers/input/evbug.c
+++ b/drivers/input/evbug.c
@@ -26,6 +26,8 @@
  * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/input.h>
@@ -38,8 +40,8 @@ MODULE_LICENSE("GPL");
 
 static void evbug_event(struct input_handle *handle, unsigned int type, unsigned int code, int value)
 {
-	printk(KERN_DEBUG "evbug.c: Event. Dev: %s, Type: %d, Code: %d, Value: %d\n",
-		dev_name(&handle->dev->dev), type, code, value);
+	printk(KERN_DEBUG pr_fmt("Event. Dev: %s, Type: %d, Code: %d, Value: %d\n"),
+	       dev_name(&handle->dev->dev), type, code, value);
 }
 
 static int evbug_connect(struct input_handler *handler, struct input_dev *dev,
@@ -64,10 +66,10 @@ static int evbug_connect(struct input_handler *handler, struct input_dev *dev,
 	if (error)
 		goto err_unregister_handle;
 
-	printk(KERN_DEBUG "evbug.c: Connected device: %s (%s at %s)\n",
-		dev_name(&dev->dev),
-		dev->name ?: "unknown",
-		dev->phys ?: "unknown");
+	printk(KERN_DEBUG pr_fmt("Connected device: %s (%s at %s)\n"),
+	       dev_name(&dev->dev),
+	       dev->name ?: "unknown",
+	       dev->phys ?: "unknown");
 
 	return 0;
 
@@ -80,8 +82,8 @@ static int evbug_connect(struct input_handler *handler, struct input_dev *dev,
 
 static void evbug_disconnect(struct input_handle *handle)
 {
-	printk(KERN_DEBUG "evbug.c: Disconnected device: %s\n",
-		dev_name(&handle->dev->dev));
+	printk(KERN_DEBUG pr_fmt("Disconnected device: %s\n"),
+	       dev_name(&handle->dev->dev));
 
 	input_close_device(handle);
 	input_unregister_handle(handle);
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 68f09a868434..c8471a2552e7 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -8,6 +8,8 @@
  * the Free Software Foundation.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #define EVDEV_MINOR_BASE	64
 #define EVDEV_MINORS		32
 #define EVDEV_MIN_BUFFER_SIZE	64U
@@ -522,12 +524,11 @@ static int handle_eviocgbit(struct input_dev *dev,
 	if (type == EV_KEY && size == OLD_KEY_MAX) {
 		len = OLD_KEY_MAX;
 		if (printk_timed_ratelimit(&keymax_warn_time, 10 * 1000))
-			printk(KERN_WARNING
-				"evdev.c(EVIOCGBIT): Suspicious buffer size %u, "
-				"limiting output to %zu bytes. See "
-				"http://userweb.kernel.org/~dtor/eviocgbit-bug.html\n",
-				OLD_KEY_MAX,
-				BITS_TO_LONGS(OLD_KEY_MAX) * sizeof(long));
+			pr_warning("(EVIOCGBIT): Suspicious buffer size %u, "
+				   "limiting output to %zu bytes. See "
+				   "http://userweb.kernel.org/~dtor/eviocgbit-bug.html\n",
+				   OLD_KEY_MAX,
+				   BITS_TO_LONGS(OLD_KEY_MAX) * sizeof(long));
 	}
 
 	return bits_to_user(bits, len, size, p, compat_mode);
@@ -686,6 +687,10 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 #define EVIOC_MASK_SIZE(nr)	((nr) & ~(_IOC_SIZEMASK << _IOC_SIZESHIFT))
 	switch (EVIOC_MASK_SIZE(cmd)) {
 
+	case EVIOCGPROP(0):
+		return bits_to_user(dev->propbit, INPUT_PROP_MAX,
+				    size, p, compat_mode);
+
 	case EVIOCGKEY(0):
 		return bits_to_user(dev->key, KEY_MAX, size, p, compat_mode);
 
@@ -897,7 +902,7 @@ static int evdev_connect(struct input_handler *handler, struct input_dev *dev,
 			break;
 
 	if (minor == EVDEV_MINORS) {
-		printk(KERN_ERR "evdev: no more free evdev devices\n");
+		pr_err("no more free evdev devices\n");
 		return -ENFILE;
 	}
 
diff --git a/drivers/input/ff-core.c b/drivers/input/ff-core.c
index 03078c08309a..3367f760d75a 100644
--- a/drivers/input/ff-core.c
+++ b/drivers/input/ff-core.c
@@ -23,7 +23,7 @@
 
 /* #define DEBUG */
 
-#define debug(format, arg...) pr_debug("ff-core: " format "\n", ## arg)
+#define pr_fmt(fmt) KBUILD_BASENAME ": " fmt
 
 #include <linux/input.h>
 #include <linux/module.h>
@@ -116,7 +116,7 @@ int input_ff_upload(struct input_dev *dev, struct ff_effect *effect,
 
 	if (effect->type < FF_EFFECT_MIN || effect->type > FF_EFFECT_MAX ||
 	    !test_bit(effect->type, dev->ffbit)) {
-		debug("invalid or not supported effect type in upload");
+		pr_debug("invalid or not supported effect type in upload\n");
 		return -EINVAL;
 	}
 
@@ -124,7 +124,7 @@ int input_ff_upload(struct input_dev *dev, struct ff_effect *effect,
 	    (effect->u.periodic.waveform < FF_WAVEFORM_MIN ||
 	     effect->u.periodic.waveform > FF_WAVEFORM_MAX ||
 	     !test_bit(effect->u.periodic.waveform, dev->ffbit))) {
-		debug("invalid or not supported wave form in upload");
+		pr_debug("invalid or not supported wave form in upload\n");
 		return -EINVAL;
 	}
 
@@ -246,7 +246,7 @@ static int flush_effects(struct input_dev *dev, struct file *file)
 	struct ff_device *ff = dev->ff;
 	int i;
 
-	debug("flushing now");
+	pr_debug("flushing now\n");
 
 	mutex_lock(&ff->mutex);
 
@@ -315,8 +315,7 @@ int input_ff_create(struct input_dev *dev, int max_effects)
 	int i;
 
 	if (!max_effects) {
-		printk(KERN_ERR
-		       "ff-core: cannot allocate device without any effects\n");
+		pr_err("cannot allocate device without any effects\n");
 		return -EINVAL;
 	}
 
diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c
index 1d881c96ba8f..117a59aaa70e 100644
--- a/drivers/input/ff-memless.c
+++ b/drivers/input/ff-memless.c
@@ -23,7 +23,7 @@
 
 /* #define DEBUG */
 
-#define debug(format, arg...) pr_debug("ff-memless: " format "\n", ## arg)
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/slab.h>
 #include <linux/input.h>
@@ -129,7 +129,7 @@ static void ml_schedule_timer(struct ml_device *ml)
 	int events = 0;
 	int i;
 
-	debug("calculating next timer");
+	pr_debug("calculating next timer\n");
 
 	for (i = 0; i < FF_MEMLESS_EFFECTS; i++) {
 
@@ -149,10 +149,10 @@ static void ml_schedule_timer(struct ml_device *ml)
 	}
 
 	if (!events) {
-		debug("no actions");
+		pr_debug("no actions\n");
 		del_timer(&ml->timer);
 	} else {
-		debug("timer set");
+		pr_debug("timer set\n");
 		mod_timer(&ml->timer, earliest);
 	}
 }
@@ -173,8 +173,8 @@ static int apply_envelope(struct ml_effect_state *state, int value,
 	if (envelope->attack_length &&
 	    time_before(now,
 			state->play_at + msecs_to_jiffies(envelope->attack_length))) {
-		debug("value = 0x%x, attack_level = 0x%x", value,
-		      envelope->attack_level);
+		pr_debug("value = 0x%x, attack_level = 0x%x\n",
+			 value, envelope->attack_level);
 		time_from_level = jiffies_to_msecs(now - state->play_at);
 		time_of_envelope = envelope->attack_length;
 		envelope_level = min_t(__s16, envelope->attack_level, 0x7fff);
@@ -191,13 +191,13 @@ static int apply_envelope(struct ml_effect_state *state, int value,
 
 	difference = abs(value) - envelope_level;
 
-	debug("difference = %d", difference);
-	debug("time_from_level = 0x%x", time_from_level);
-	debug("time_of_envelope = 0x%x", time_of_envelope);
+	pr_debug("difference = %d\n", difference);
+	pr_debug("time_from_level = 0x%x\n", time_from_level);
+	pr_debug("time_of_envelope = 0x%x\n", time_of_envelope);
 
 	difference = difference * time_from_level / time_of_envelope;
 
-	debug("difference = %d", difference);
+	pr_debug("difference = %d\n", difference);
 
 	return value < 0 ?
 		-(difference + envelope_level) : (difference + envelope_level);
@@ -215,8 +215,7 @@ static int get_compatible_type(struct ff_device *ff, int effect_type)
 	if (effect_type == FF_PERIODIC && test_bit(FF_RUMBLE, ff->ffbit))
 		return FF_RUMBLE;
 
-	printk(KERN_ERR
-	       "ff-memless: invalid type in get_compatible_type()\n");
+	pr_err("invalid type in get_compatible_type()\n");
 
 	return 0;
 }
@@ -312,7 +311,7 @@ static void ml_combine_effects(struct ff_effect *effect,
 		break;
 
 	default:
-		printk(KERN_ERR "ff-memless: invalid type in ml_combine_effects()\n");
+		pr_err("invalid type in ml_combine_effects()\n");
 		break;
 	}
 
@@ -406,7 +405,7 @@ static void ml_effect_timer(unsigned long timer_data)
 	struct ml_device *ml = dev->ff->private;
 	unsigned long flags;
 
-	debug("timer: updating effects");
+	pr_debug("timer: updating effects\n");
 
 	spin_lock_irqsave(&dev->event_lock, flags);
 	ml_play_effects(ml);
@@ -438,7 +437,7 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value)
 	struct ml_effect_state *state = &ml->states[effect_id];
 
 	if (value > 0) {
-		debug("initiated play");
+		pr_debug("initiated play\n");
 
 		__set_bit(FF_EFFECT_STARTED, &state->flags);
 		state->count = value;
@@ -449,7 +448,7 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value)
 		state->adj_at = state->play_at;
 
 	} else {
-		debug("initiated stop");
+		pr_debug("initiated stop\n");
 
 		if (test_bit(FF_EFFECT_PLAYING, &state->flags))
 			__set_bit(FF_EFFECT_ABORTING, &state->flags);
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
index 46239e47a260..dbf741c95835 100644
--- a/drivers/input/gameport/gameport.c
+++ b/drivers/input/gameport/gameport.c
@@ -18,13 +18,11 @@
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/gameport.h>
-#include <linux/wait.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
-#include <linux/kthread.h>
+#include <linux/workqueue.h>
 #include <linux/sched.h>	/* HZ */
 #include <linux/mutex.h>
-#include <linux/freezer.h>
 
 /*#include <asm/io.h>*/
 
@@ -234,58 +232,22 @@ struct gameport_event {
 
 static DEFINE_SPINLOCK(gameport_event_lock);	/* protects gameport_event_list */
 static LIST_HEAD(gameport_event_list);
-static DECLARE_WAIT_QUEUE_HEAD(gameport_wait);
-static struct task_struct *gameport_task;
 
-static int gameport_queue_event(void *object, struct module *owner,
-				enum gameport_event_type event_type)
+static struct gameport_event *gameport_get_event(void)
 {
+	struct gameport_event *event = NULL;
 	unsigned long flags;
-	struct gameport_event *event;
-	int retval = 0;
 
 	spin_lock_irqsave(&gameport_event_lock, flags);
 
-	/*
-	 * Scan event list for the other events for the same gameport port,
-	 * starting with the most recent one. If event is the same we
-	 * do not need add new one. If event is of different type we
-	 * need to add this event and should not look further because
-	 * we need to preseve sequence of distinct events.
-	 */
-	list_for_each_entry_reverse(event, &gameport_event_list, node) {
-		if (event->object == object) {
-			if (event->type == event_type)
-				goto out;
-			break;
-		}
-	}
-
-	event = kmalloc(sizeof(struct gameport_event), GFP_ATOMIC);
-	if (!event) {
-		pr_err("Not enough memory to queue event %d\n", event_type);
-		retval = -ENOMEM;
-		goto out;
-	}
-
-	if (!try_module_get(owner)) {
-		pr_warning("Can't get module reference, dropping event %d\n",
-			   event_type);
-		kfree(event);
-		retval = -EINVAL;
-		goto out;
+	if (!list_empty(&gameport_event_list)) {
+		event = list_first_entry(&gameport_event_list,
+					 struct gameport_event, node);
+		list_del_init(&event->node);
 	}
 
-	event->type = event_type;
-	event->object = object;
-	event->owner = owner;
-
-	list_add_tail(&event->node, &gameport_event_list);
-	wake_up(&gameport_wait);
-
-out:
 	spin_unlock_irqrestore(&gameport_event_lock, flags);
-	return retval;
+	return event;
 }
 
 static void gameport_free_event(struct gameport_event *event)
@@ -319,24 +281,8 @@ static void gameport_remove_duplicate_events(struct gameport_event *event)
 	spin_unlock_irqrestore(&gameport_event_lock, flags);
 }
 
-static struct gameport_event *gameport_get_event(void)
-{
-	struct gameport_event *event = NULL;
-	unsigned long flags;
-
-	spin_lock_irqsave(&gameport_event_lock, flags);
-
-	if (!list_empty(&gameport_event_list)) {
-		event = list_first_entry(&gameport_event_list,
-					 struct gameport_event, node);
-		list_del_init(&event->node);
-	}
-
-	spin_unlock_irqrestore(&gameport_event_lock, flags);
-	return event;
-}
 
-static void gameport_handle_event(void)
+static void gameport_handle_events(struct work_struct *work)
 {
 	struct gameport_event *event;
 
@@ -368,6 +314,59 @@ static void gameport_handle_event(void)
 	mutex_unlock(&gameport_mutex);
 }
 
+static DECLARE_WORK(gameport_event_work, gameport_handle_events);
+
+static int gameport_queue_event(void *object, struct module *owner,
+				enum gameport_event_type event_type)
+{
+	unsigned long flags;
+	struct gameport_event *event;
+	int retval = 0;
+
+	spin_lock_irqsave(&gameport_event_lock, flags);
+
+	/*
+	 * Scan event list for the other events for the same gameport port,
+	 * starting with the most recent one. If event is the same we
+	 * do not need add new one. If event is of different type we
+	 * need to add this event and should not look further because
+	 * we need to preserve sequence of distinct events.
+	 */
+	list_for_each_entry_reverse(event, &gameport_event_list, node) {
+		if (event->object == object) {
+			if (event->type == event_type)
+				goto out;
+			break;
+		}
+	}
+
+	event = kmalloc(sizeof(struct gameport_event), GFP_ATOMIC);
+	if (!event) {
+		pr_err("Not enough memory to queue event %d\n", event_type);
+		retval = -ENOMEM;
+		goto out;
+	}
+
+	if (!try_module_get(owner)) {
+		pr_warning("Can't get module reference, dropping event %d\n",
+			   event_type);
+		kfree(event);
+		retval = -EINVAL;
+		goto out;
+	}
+
+	event->type = event_type;
+	event->object = object;
+	event->owner = owner;
+
+	list_add_tail(&event->node, &gameport_event_list);
+	schedule_work(&gameport_event_work);
+
+out:
+	spin_unlock_irqrestore(&gameport_event_lock, flags);
+	return retval;
+}
+
 /*
  * Remove all events that have been submitted for a given object,
  * be it a gameport port or a driver.
@@ -419,19 +418,6 @@ static struct gameport *gameport_get_pending_child(struct gameport *parent)
 	return child;
 }
 
-static int gameport_thread(void *nothing)
-{
-	set_freezable();
-	do {
-		gameport_handle_event();
-		wait_event_freezable(gameport_wait,
-			kthread_should_stop() || !list_empty(&gameport_event_list));
-	} while (!kthread_should_stop());
-
-	return 0;
-}
-
-
 /*
  * Gameport port operations
  */
@@ -814,13 +800,6 @@ static int __init gameport_init(void)
 		return error;
 	}
 
-	gameport_task = kthread_run(gameport_thread, NULL, "kgameportd");
-	if (IS_ERR(gameport_task)) {
-		bus_unregister(&gameport_bus);
-		error = PTR_ERR(gameport_task);
-		pr_err("Failed to start kgameportd, error: %d\n", error);
-		return error;
-	}
 
 	return 0;
 }
@@ -828,7 +807,12 @@ static int __init gameport_init(void)
 static void __exit gameport_exit(void)
 {
 	bus_unregister(&gameport_bus);
-	kthread_stop(gameport_task);
+
+	/*
+	 * There should not be any outstanding events but work may
+	 * still be scheduled so simply cancel it.
+	 */
+	cancel_work_sync(&gameport_event_work);
 }
 
 subsys_initcall(gameport_init);
diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c
new file mode 100644
index 000000000000..c48c81f0308d
--- /dev/null
+++ b/drivers/input/input-mt.c
@@ -0,0 +1,170 @@
+/*
+ * Input Multitouch Library
+ *
+ * Copyright (c) 2008-2010 Henrik Rydberg
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/input/mt.h>
+#include <linux/slab.h>
+
+#define TRKID_SGN	((TRKID_MAX + 1) >> 1)
+
+/**
+ * input_mt_init_slots() - initialize MT input slots
+ * @dev: input device supporting MT events and finger tracking
+ * @num_slots: number of slots used by the device
+ *
+ * This function allocates all necessary memory for MT slot handling
+ * in the input device, prepares the ABS_MT_SLOT and
+ * ABS_MT_TRACKING_ID events for use and sets up appropriate buffers.
+ * May be called repeatedly. Returns -EINVAL if attempting to
+ * reinitialize with a different number of slots.
+ */
+int input_mt_init_slots(struct input_dev *dev, unsigned int num_slots)
+{
+	int i;
+
+	if (!num_slots)
+		return 0;
+	if (dev->mt)
+		return dev->mtsize != num_slots ? -EINVAL : 0;
+
+	dev->mt = kcalloc(num_slots, sizeof(struct input_mt_slot), GFP_KERNEL);
+	if (!dev->mt)
+		return -ENOMEM;
+
+	dev->mtsize = num_slots;
+	input_set_abs_params(dev, ABS_MT_SLOT, 0, num_slots - 1, 0, 0);
+	input_set_abs_params(dev, ABS_MT_TRACKING_ID, 0, TRKID_MAX, 0, 0);
+	input_set_events_per_packet(dev, 6 * num_slots);
+
+	/* Mark slots as 'unused' */
+	for (i = 0; i < num_slots; i++)
+		input_mt_set_value(&dev->mt[i], ABS_MT_TRACKING_ID, -1);
+
+	return 0;
+}
+EXPORT_SYMBOL(input_mt_init_slots);
+
+/**
+ * input_mt_destroy_slots() - frees the MT slots of the input device
+ * @dev: input device with allocated MT slots
+ *
+ * This function is only needed in error path as the input core will
+ * automatically free the MT slots when the device is destroyed.
+ */
+void input_mt_destroy_slots(struct input_dev *dev)
+{
+	kfree(dev->mt);
+	dev->mt = NULL;
+	dev->mtsize = 0;
+	dev->slot = 0;
+	dev->trkid = 0;
+}
+EXPORT_SYMBOL(input_mt_destroy_slots);
+
+/**
+ * input_mt_report_slot_state() - report contact state
+ * @dev: input device with allocated MT slots
+ * @tool_type: the tool type to use in this slot
+ * @active: true if contact is active, false otherwise
+ *
+ * Reports a contact via ABS_MT_TRACKING_ID, and optionally
+ * ABS_MT_TOOL_TYPE. If active is true and the slot is currently
+ * inactive, or if the tool type is changed, a new tracking id is
+ * assigned to the slot. The tool type is only reported if the
+ * corresponding absbit field is set.
+ */
+void input_mt_report_slot_state(struct input_dev *dev,
+				unsigned int tool_type, bool active)
+{
+	struct input_mt_slot *mt;
+	int id;
+
+	if (!dev->mt || !active) {
+		input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, -1);
+		return;
+	}
+
+	mt = &dev->mt[dev->slot];
+	id = input_mt_get_value(mt, ABS_MT_TRACKING_ID);
+	if (id < 0 || input_mt_get_value(mt, ABS_MT_TOOL_TYPE) != tool_type)
+		id = input_mt_new_trkid(dev);
+
+	input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, id);
+	input_event(dev, EV_ABS, ABS_MT_TOOL_TYPE, tool_type);
+}
+EXPORT_SYMBOL(input_mt_report_slot_state);
+
+/**
+ * input_mt_report_finger_count() - report contact count
+ * @dev: input device with allocated MT slots
+ * @count: the number of contacts
+ *
+ * Reports the contact count via BTN_TOOL_FINGER, BTN_TOOL_DOUBLETAP,
+ * BTN_TOOL_TRIPLETAP and BTN_TOOL_QUADTAP.
+ *
+ * The input core ensures only the KEY events already setup for
+ * this device will produce output.
+ */
+void input_mt_report_finger_count(struct input_dev *dev, int count)
+{
+	input_event(dev, EV_KEY, BTN_TOOL_FINGER, count == 1);
+	input_event(dev, EV_KEY, BTN_TOOL_DOUBLETAP, count == 2);
+	input_event(dev, EV_KEY, BTN_TOOL_TRIPLETAP, count == 3);
+	input_event(dev, EV_KEY, BTN_TOOL_QUADTAP, count == 4);
+}
+EXPORT_SYMBOL(input_mt_report_finger_count);
+
+/**
+ * input_mt_report_pointer_emulation() - common pointer emulation
+ * @dev: input device with allocated MT slots
+ * @use_count: report number of active contacts as finger count
+ *
+ * Performs legacy pointer emulation via BTN_TOUCH, ABS_X, ABS_Y and
+ * ABS_PRESSURE. Touchpad finger count is emulated if use_count is true.
+ *
+ * The input core ensures only the KEY and ABS axes already setup for
+ * this device will produce output.
+ */
+void input_mt_report_pointer_emulation(struct input_dev *dev, bool use_count)
+{
+	struct input_mt_slot *oldest = 0;
+	int oldid = dev->trkid;
+	int count = 0;
+	int i;
+
+	for (i = 0; i < dev->mtsize; ++i) {
+		struct input_mt_slot *ps = &dev->mt[i];
+		int id = input_mt_get_value(ps, ABS_MT_TRACKING_ID);
+
+		if (id < 0)
+			continue;
+		if ((id - oldid) & TRKID_SGN) {
+			oldest = ps;
+			oldid = id;
+		}
+		count++;
+	}
+
+	input_event(dev, EV_KEY, BTN_TOUCH, count > 0);
+	if (use_count)
+		input_mt_report_finger_count(dev, count);
+
+	if (oldest) {
+		int x = input_mt_get_value(oldest, ABS_MT_POSITION_X);
+		int y = input_mt_get_value(oldest, ABS_MT_POSITION_Y);
+		int p = input_mt_get_value(oldest, ABS_MT_PRESSURE);
+
+		input_event(dev, EV_ABS, ABS_X, x);
+		input_event(dev, EV_ABS, ABS_Y, y);
+		input_event(dev, EV_ABS, ABS_PRESSURE, p);
+	} else {
+		input_event(dev, EV_ABS, ABS_PRESSURE, 0);
+	}
+}
+EXPORT_SYMBOL(input_mt_report_pointer_emulation);
diff --git a/drivers/input/input-polldev.c b/drivers/input/input-polldev.c
index 10c9b0a845f0..0559e309bac9 100644
--- a/drivers/input/input-polldev.c
+++ b/drivers/input/input-polldev.c
@@ -8,6 +8,8 @@
  * the Free Software Foundation.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/jiffies.h>
 #include <linux/slab.h>
 #include <linux/mutex.h>
@@ -33,8 +35,7 @@ static int input_polldev_start_workqueue(void)
 	if (!polldev_users) {
 		polldev_wq = create_singlethread_workqueue("ipolldevd");
 		if (!polldev_wq) {
-			printk(KERN_ERR "input-polldev: failed to create "
-				"ipolldevd workqueue\n");
+			pr_err("failed to create ipolldevd workqueue\n");
 			retval = -ENOMEM;
 			goto out;
 		}
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 5edc41aa08f8..f37da09a5e4c 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -10,9 +10,11 @@
  * the Free Software Foundation.
  */
 
+#define pr_fmt(fmt) KBUILD_BASENAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/types.h>
-#include <linux/input.h>
+#include <linux/input/mt.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/random.h>
@@ -959,10 +961,8 @@ static int input_attach_handler(struct input_dev *dev, struct input_handler *han
 
 	error = handler->connect(handler, dev, id);
 	if (error && error != -ENODEV)
-		printk(KERN_ERR
-			"input: failed to attach handler %s to device %s, "
-			"error: %d\n",
-			handler->name, kobject_name(&dev->dev.kobj), error);
+		pr_err("failed to attach handler %s to device %s, error: %d\n",
+		       handler->name, kobject_name(&dev->dev.kobj), error);
 
 	return error;
 }
@@ -1110,6 +1110,8 @@ static int input_devices_seq_show(struct seq_file *seq, void *v)
 		seq_printf(seq, "%s ", handle->name);
 	seq_putc(seq, '\n');
 
+	input_seq_print_bitmap(seq, "PROP", dev->propbit, INPUT_PROP_MAX);
+
 	input_seq_print_bitmap(seq, "EV", dev->evbit, EV_MAX);
 	if (test_bit(EV_KEY, dev->evbit))
 		input_seq_print_bitmap(seq, "KEY", dev->keybit, KEY_MAX);
@@ -1333,11 +1335,26 @@ static ssize_t input_dev_show_modalias(struct device *dev,
 }
 static DEVICE_ATTR(modalias, S_IRUGO, input_dev_show_modalias, NULL);
 
+static int input_print_bitmap(char *buf, int buf_size, unsigned long *bitmap,
+			      int max, int add_cr);
+
+static ssize_t input_dev_show_properties(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct input_dev *input_dev = to_input_dev(dev);
+	int len = input_print_bitmap(buf, PAGE_SIZE, input_dev->propbit,
+				     INPUT_PROP_MAX, true);
+	return min_t(int, len, PAGE_SIZE);
+}
+static DEVICE_ATTR(properties, S_IRUGO, input_dev_show_properties, NULL);
+
 static struct attribute *input_dev_attrs[] = {
 	&dev_attr_name.attr,
 	&dev_attr_phys.attr,
 	&dev_attr_uniq.attr,
 	&dev_attr_modalias.attr,
+	&dev_attr_properties.attr,
 	NULL
 };
 
@@ -1471,7 +1488,7 @@ static int input_add_uevent_bm_var(struct kobj_uevent_env *env,
 {
 	int len;
 
-	if (add_uevent_var(env, "%s=", name))
+	if (add_uevent_var(env, "%s", name))
 		return -ENOMEM;
 
 	len = input_print_bitmap(&env->buf[env->buflen - 1],
@@ -1537,6 +1554,8 @@ static int input_dev_uevent(struct device *device, struct kobj_uevent_env *env)
 	if (dev->uniq)
 		INPUT_ADD_HOTPLUG_VAR("UNIQ=\"%s\"", dev->uniq);
 
+	INPUT_ADD_HOTPLUG_BM_VAR("PROP=", dev->propbit, INPUT_PROP_MAX);
+
 	INPUT_ADD_HOTPLUG_BM_VAR("EV=", dev->evbit, EV_MAX);
 	if (test_bit(EV_KEY, dev->evbit))
 		INPUT_ADD_HOTPLUG_BM_VAR("KEY=", dev->keybit, KEY_MAX);
@@ -1726,52 +1745,6 @@ void input_free_device(struct input_dev *dev)
 EXPORT_SYMBOL(input_free_device);
 
 /**
- * input_mt_create_slots() - create MT input slots
- * @dev: input device supporting MT events and finger tracking
- * @num_slots: number of slots used by the device
- *
- * This function allocates all necessary memory for MT slot handling in the
- * input device, and adds ABS_MT_SLOT to the device capabilities. All slots
- * are initially marked as unused by setting ABS_MT_TRACKING_ID to -1.
- */
-int input_mt_create_slots(struct input_dev *dev, unsigned int num_slots)
-{
-	int i;
-
-	if (!num_slots)
-		return 0;
-
-	dev->mt = kcalloc(num_slots, sizeof(struct input_mt_slot), GFP_KERNEL);
-	if (!dev->mt)
-		return -ENOMEM;
-
-	dev->mtsize = num_slots;
-	input_set_abs_params(dev, ABS_MT_SLOT, 0, num_slots - 1, 0, 0);
-
-	/* Mark slots as 'unused' */
-	for (i = 0; i < num_slots; i++)
-		dev->mt[i].abs[ABS_MT_TRACKING_ID - ABS_MT_FIRST] = -1;
-
-	return 0;
-}
-EXPORT_SYMBOL(input_mt_create_slots);
-
-/**
- * input_mt_destroy_slots() - frees the MT slots of the input device
- * @dev: input device with allocated MT slots
- *
- * This function is only needed in error path as the input core will
- * automatically free the MT slots when the device is destroyed.
- */
-void input_mt_destroy_slots(struct input_dev *dev)
-{
-	kfree(dev->mt);
-	dev->mt = NULL;
-	dev->mtsize = 0;
-}
-EXPORT_SYMBOL(input_mt_destroy_slots);
-
-/**
  * input_set_capability - mark device as capable of a certain event
  * @dev: device that is capable of emitting or accepting event
  * @type: type of the event (EV_KEY, EV_REL, etc...)
@@ -1820,9 +1793,8 @@ void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int
 		break;
 
 	default:
-		printk(KERN_ERR
-			"input_set_capability: unknown type %u (code %u)\n",
-			type, code);
+		pr_err("input_set_capability: unknown type %u (code %u)\n",
+		       type, code);
 		dump_stack();
 		return;
 	}
@@ -1904,8 +1876,9 @@ int input_register_device(struct input_dev *dev)
 		return error;
 
 	path = kobject_get_path(&dev->dev.kobj, GFP_KERNEL);
-	printk(KERN_INFO "input: %s as %s\n",
-		dev->name ? dev->name : "Unspecified device", path ? path : "N/A");
+	pr_info("%s as %s\n",
+		dev->name ? dev->name : "Unspecified device",
+		path ? path : "N/A");
 	kfree(path);
 
 	error = mutex_lock_interruptible(&input_mutex);
@@ -2187,7 +2160,7 @@ static int __init input_init(void)
 
 	err = class_register(&input_class);
 	if (err) {
-		printk(KERN_ERR "input: unable to register input_dev class\n");
+		pr_err("unable to register input_dev class\n");
 		return err;
 	}
 
@@ -2197,7 +2170,7 @@ static int __init input_init(void)
 
 	err = register_chrdev(INPUT_MAJOR, "input", &input_fops);
 	if (err) {
-		printk(KERN_ERR "input: unable to register char major %d", INPUT_MAJOR);
+		pr_err("unable to register char major %d", INPUT_MAJOR);
 		goto fail2;
 	}
 
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 9d424cebfd2c..3182c9cd1b0e 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -10,6 +10,8 @@
  * (at your option) any later version.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <asm/io.h>
 #include <asm/system.h>
 #include <linux/delay.h>
@@ -806,7 +808,7 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev,
 			break;
 
 	if (minor == JOYDEV_MINORS) {
-		printk(KERN_ERR "joydev: no more free joydev devices\n");
+		pr_err("no more free joydev devices\n");
 		return -ENFILE;
 	}
 
diff --git a/drivers/input/joystick/iforce/Makefile b/drivers/input/joystick/iforce/Makefile
index 74daff49ab6e..bc5bda22f15e 100644
--- a/drivers/input/joystick/iforce/Makefile
+++ b/drivers/input/joystick/iforce/Makefile
@@ -4,17 +4,8 @@
 # By Johann Deneux <johann.deneux@gmail.com>
 #
 
-# Goal definition
-iforce-objs	:= iforce-ff.o iforce-main.o iforce-packets.o
-
 obj-$(CONFIG_JOYSTICK_IFORCE)	+= iforce.o
 
-ifeq ($(CONFIG_JOYSTICK_IFORCE_232),y)
-	iforce-objs += iforce-serio.o
-endif
-
-ifeq ($(CONFIG_JOYSTICK_IFORCE_USB),y)
-	iforce-objs += iforce-usb.o
-endif
-
-EXTRA_CFLAGS = -Werror-implicit-function-declaration
+iforce-y := iforce-ff.o iforce-main.o iforce-packets.o
+iforce-$(CONFIG_JOYSTICK_IFORCE_232)	+= iforce-serio.o
+iforce-$(CONFIG_JOYSTICK_IFORCE_USB)	+= iforce-usb.o
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index f9fb7fa10af3..56abf3d0e911 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -543,21 +543,25 @@ exit:
 static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
 {
 	struct usb_endpoint_descriptor *ep_irq_out;
-	int error = -ENOMEM;
+	int error;
 
 	if (xpad->xtype != XTYPE_XBOX360 && xpad->xtype != XTYPE_XBOX)
 		return 0;
 
 	xpad->odata = usb_alloc_coherent(xpad->udev, XPAD_PKT_LEN,
 					 GFP_KERNEL, &xpad->odata_dma);
-	if (!xpad->odata)
+	if (!xpad->odata) {
+		error = -ENOMEM;
 		goto fail1;
+	}
 
 	mutex_init(&xpad->odata_mutex);
 
 	xpad->irq_out = usb_alloc_urb(0, GFP_KERNEL);
-	if (!xpad->irq_out)
+	if (!xpad->irq_out) {
+		error = -ENOMEM;
 		goto fail2;
+	}
 
 	ep_irq_out = &intf->cur_altsetting->endpoint[1].desc;
 	usb_fill_int_urb(xpad->irq_out, xpad->udev,
@@ -728,7 +732,7 @@ static void xpad_led_disconnect(struct usb_xpad *xpad)
 
 	if (xpad_led) {
 		led_classdev_unregister(&xpad_led->led_cdev);
-		kfree(xpad_led->name);
+		kfree(xpad_led);
 	}
 }
 #else
@@ -756,8 +760,9 @@ static void xpad_close(struct input_dev *dev)
 {
 	struct usb_xpad *xpad = input_get_drvdata(dev);
 
-	if(xpad->xtype != XTYPE_XBOX360W)
+	if (xpad->xtype != XTYPE_XBOX360W)
 		usb_kill_urb(xpad->irq_in);
+
 	xpad_stop_output(xpad);
 }
 
@@ -789,8 +794,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 	struct usb_xpad *xpad;
 	struct input_dev *input_dev;
 	struct usb_endpoint_descriptor *ep_irq_in;
-	int i;
-	int error = -ENOMEM;
+	int i, error;
 
 	for (i = 0; xpad_device[i].idVendor; i++) {
 		if ((le16_to_cpu(udev->descriptor.idVendor) == xpad_device[i].idVendor) &&
@@ -800,17 +804,23 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 
 	xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL);
 	input_dev = input_allocate_device();
-	if (!xpad || !input_dev)
+	if (!xpad || !input_dev) {
+		error = -ENOMEM;
 		goto fail1;
+	}
 
 	xpad->idata = usb_alloc_coherent(udev, XPAD_PKT_LEN,
 					 GFP_KERNEL, &xpad->idata_dma);
-	if (!xpad->idata)
+	if (!xpad->idata) {
+		error = -ENOMEM;
 		goto fail1;
+	}
 
 	xpad->irq_in = usb_alloc_urb(0, GFP_KERNEL);
-	if (!xpad->irq_in)
+	if (!xpad->irq_in) {
+		error = -ENOMEM;
 		goto fail2;
+	}
 
 	xpad->udev = udev;
 	xpad->mapping = xpad_device[i].mapping;
@@ -887,15 +897,15 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 
 	error = xpad_init_output(intf, xpad);
 	if (error)
-		goto fail2;
+		goto fail3;
 
 	error = xpad_init_ff(xpad);
 	if (error)
-		goto fail3;
+		goto fail4;
 
 	error = xpad_led_probe(xpad);
 	if (error)
-		goto fail3;
+		goto fail5;
 
 	ep_irq_in = &intf->cur_altsetting->endpoint[0].desc;
 	usb_fill_int_urb(xpad->irq_in, udev,
@@ -907,34 +917,26 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 
 	error = input_register_device(xpad->dev);
 	if (error)
-		goto fail4;
+		goto fail6;
 
 	usb_set_intfdata(intf, xpad);
 
-	/*
-	 * Submit the int URB immediatly rather than waiting for open
-	 * because we get status messages from the device whether
-	 * or not any controllers are attached.  In fact, it's
-	 * exactly the message that a controller has arrived that
-	 * we're waiting for.
-	 */
 	if (xpad->xtype == XTYPE_XBOX360W) {
-		xpad->irq_in->dev = xpad->udev;
-		error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
-		if (error)
-			goto fail4;
-
 		/*
 		 * Setup the message to set the LEDs on the
 		 * controller when it shows up
 		 */
 		xpad->bulk_out = usb_alloc_urb(0, GFP_KERNEL);
-		if(!xpad->bulk_out)
-			goto fail5;
+		if (!xpad->bulk_out) {
+			error = -ENOMEM;
+			goto fail7;
+		}
 
 		xpad->bdata = kzalloc(XPAD_PKT_LEN, GFP_KERNEL);
-		if(!xpad->bdata)
-			goto fail6;
+		if (!xpad->bdata) {
+			error = -ENOMEM;
+			goto fail8;
+		}
 
 		xpad->bdata[2] = 0x08;
 		switch (intf->cur_altsetting->desc.bInterfaceNumber) {
@@ -955,14 +957,31 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 		usb_fill_bulk_urb(xpad->bulk_out, udev,
 				usb_sndbulkpipe(udev, ep_irq_in->bEndpointAddress),
 				xpad->bdata, XPAD_PKT_LEN, xpad_bulk_out, xpad);
+
+		/*
+		 * Submit the int URB immediately rather than waiting for open
+		 * because we get status messages from the device whether
+		 * or not any controllers are attached.  In fact, it's
+		 * exactly the message that a controller has arrived that
+		 * we're waiting for.
+		 */
+		xpad->irq_in->dev = xpad->udev;
+		error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
+		if (error)
+			goto fail9;
 	}
 
 	return 0;
 
- fail6:	usb_free_urb(xpad->bulk_out);
- fail5:	usb_kill_urb(xpad->irq_in);
- fail4:	usb_free_urb(xpad->irq_in);
- fail3:	xpad_deinit_output(xpad);
+ fail9:	kfree(xpad->bdata);
+ fail8:	usb_free_urb(xpad->bulk_out);
+ fail7:	input_unregister_device(input_dev);
+	input_dev = NULL;
+ fail6:	xpad_led_disconnect(xpad);
+ fail5:	if (input_dev)
+		input_ff_destroy(input_dev);
+ fail4:	xpad_deinit_output(xpad);
+ fail3:	usb_free_urb(xpad->irq_in);
  fail2:	usb_free_coherent(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
  fail1:	input_free_device(input_dev);
 	kfree(xpad);
@@ -974,21 +993,24 @@ static void xpad_disconnect(struct usb_interface *intf)
 {
 	struct usb_xpad *xpad = usb_get_intfdata (intf);
 
-	usb_set_intfdata(intf, NULL);
-	if (xpad) {
-		xpad_led_disconnect(xpad);
-		input_unregister_device(xpad->dev);
-		xpad_deinit_output(xpad);
-		if (xpad->xtype == XTYPE_XBOX360W) {
-			usb_kill_urb(xpad->bulk_out);
-			usb_free_urb(xpad->bulk_out);
-			usb_kill_urb(xpad->irq_in);
-		}
-		usb_free_urb(xpad->irq_in);
-		usb_free_coherent(xpad->udev, XPAD_PKT_LEN,
-				xpad->idata, xpad->idata_dma);
-		kfree(xpad);
+	xpad_led_disconnect(xpad);
+	input_unregister_device(xpad->dev);
+	xpad_deinit_output(xpad);
+
+	if (xpad->xtype == XTYPE_XBOX360W) {
+		usb_kill_urb(xpad->bulk_out);
+		usb_free_urb(xpad->bulk_out);
+		usb_kill_urb(xpad->irq_in);
 	}
+
+	usb_free_urb(xpad->irq_in);
+	usb_free_coherent(xpad->udev, XPAD_PKT_LEN,
+			xpad->idata, xpad->idata_dma);
+
+	kfree(xpad->bdata);
+	kfree(xpad);
+
+	usb_set_intfdata(intf, NULL);
 }
 
 static struct usb_driver xpad_driver = {
@@ -1000,10 +1022,7 @@ static struct usb_driver xpad_driver = {
 
 static int __init usb_xpad_init(void)
 {
-	int result = usb_register(&xpad_driver);
-	if (result == 0)
-		printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
-	return result;
+	return usb_register(&xpad_driver);
 }
 
 static void __exit usb_xpad_exit(void)
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 3a87f3ba5f75..e98beae23cfd 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -196,20 +196,22 @@ config KEYBOARD_GPIO_POLLED
 	  module will be called gpio_keys_polled.
 
 config KEYBOARD_TCA6416
-	tristate "TCA6416 Keypad Support"
+	tristate "TCA6416/TCA6408A Keypad Support"
 	depends on I2C
 	help
 	  This driver implements basic keypad functionality
-	  for keys connected through TCA6416 IO expander
+	  for keys connected through TCA6416/TCA6408A IO expanders.
 
 	  Say Y here if your device has keys connected to
-	  TCA6416 IO expander. Your board-specific setup logic
+	  TCA6416/TCA6408A IO expander. Your board-specific setup logic
 	  must also provide pin-mask details(of which TCA6416 pins
 	  are used for keypad).
 
-	  If enabled the complete TCA6416 device will be managed through
+	  If enabled the entire TCA6416 device will be managed through
 	  this driver.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called tca6416_keypad.
 
 config KEYBOARD_MATRIX
 	tristate "GPIO driven matrix keypad support"
@@ -459,6 +461,15 @@ config KEYBOARD_OMAP4
 	  To compile this driver as a module, choose M here: the
 	  module will be called omap4-keypad.
 
+config KEYBOARD_SPEAR
+	tristate "ST SPEAR keyboard support"
+	depends on PLAT_SPEAR
+	help
+	  Say Y here if you want to use the SPEAR keyboard.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called spear-keboard.
+
 config KEYBOARD_TNETV107X
 	tristate "TI TNETV107X keypad support"
 	depends on ARCH_DAVINCI_TNETV107X
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 622de73a445d..fde89e0dd465 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_KEYBOARD_PXA930_ROTARY)	+= pxa930_rotary.o
 obj-$(CONFIG_KEYBOARD_QT2160)		+= qt2160.o
 obj-$(CONFIG_KEYBOARD_SAMSUNG)		+= samsung-keypad.o
 obj-$(CONFIG_KEYBOARD_SH_KEYSC)		+= sh_keysc.o
+obj-$(CONFIG_KEYBOARD_SPEAR)		+= spear-keyboard.o
 obj-$(CONFIG_KEYBOARD_STMPE)		+= stmpe-keypad.o
 obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
 obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o
diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c
new file mode 100644
index 000000000000..bee03d64c453
--- /dev/null
+++ b/drivers/input/keyboard/spear-keyboard.c
@@ -0,0 +1,344 @@
+/*
+ * SPEAr Keyboard Driver
+ * Based on omap-keypad driver
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeup.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <plat/keyboard.h>
+
+/* Keyboard Registers */
+#define MODE_REG	0x00	/* 16 bit reg */
+#define STATUS_REG	0x0C	/* 2 bit reg */
+#define DATA_REG	0x10	/* 8 bit reg */
+#define INTR_MASK	0x54
+
+/* Register Values */
+/*
+ * pclk freq mask = (APB FEQ -1)= 82 MHZ.Programme bit 15-9 in mode
+ * control register as 1010010(82MHZ)
+ */
+#define PCLK_FREQ_MSK	0xA400	/* 82 MHz */
+#define START_SCAN	0x0100
+#define SCAN_RATE_10	0x0000
+#define SCAN_RATE_20	0x0004
+#define SCAN_RATE_40	0x0008
+#define SCAN_RATE_80	0x000C
+#define MODE_KEYBOARD	0x0002
+#define DATA_AVAIL	0x2
+
+#define KEY_MASK	0xFF000000
+#define KEY_VALUE	0x00FFFFFF
+#define ROW_MASK	0xF0
+#define COLUMN_MASK	0x0F
+#define ROW_SHIFT	4
+
+struct spear_kbd {
+	struct input_dev *input;
+	struct resource *res;
+	void __iomem *io_base;
+	struct clk *clk;
+	unsigned int irq;
+	unsigned short last_key;
+	unsigned short keycodes[256];
+};
+
+static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id)
+{
+	struct spear_kbd *kbd = dev_id;
+	struct input_dev *input = kbd->input;
+	unsigned int key;
+	u8 sts, val;
+
+	sts = readb(kbd->io_base + STATUS_REG);
+	if (sts & DATA_AVAIL)
+		return IRQ_NONE;
+
+	if (kbd->last_key != KEY_RESERVED) {
+		input_report_key(input, kbd->last_key, 0);
+		kbd->last_key = KEY_RESERVED;
+	}
+
+	/* following reads active (row, col) pair */
+	val = readb(kbd->io_base + DATA_REG);
+	key = kbd->keycodes[val];
+
+	input_event(input, EV_MSC, MSC_SCAN, val);
+	input_report_key(input, key, 1);
+	input_sync(input);
+
+	kbd->last_key = key;
+
+	/* clear interrupt */
+	writeb(0, kbd->io_base + STATUS_REG);
+
+	return IRQ_HANDLED;
+}
+
+static int spear_kbd_open(struct input_dev *dev)
+{
+	struct spear_kbd *kbd = input_get_drvdata(dev);
+	int error;
+	u16 val;
+
+	kbd->last_key = KEY_RESERVED;
+
+	error = clk_enable(kbd->clk);
+	if (error)
+		return error;
+
+	/* program keyboard */
+	val = SCAN_RATE_80 | MODE_KEYBOARD | PCLK_FREQ_MSK;
+	writew(val, kbd->io_base + MODE_REG);
+	writeb(1, kbd->io_base + STATUS_REG);
+
+	/* start key scan */
+	val = readw(kbd->io_base + MODE_REG);
+	val |= START_SCAN;
+	writew(val, kbd->io_base + MODE_REG);
+
+	return 0;
+}
+
+static void spear_kbd_close(struct input_dev *dev)
+{
+	struct spear_kbd *kbd = input_get_drvdata(dev);
+	u16 val;
+
+	/* stop key scan */
+	val = readw(kbd->io_base + MODE_REG);
+	val &= ~START_SCAN;
+	writew(val, kbd->io_base + MODE_REG);
+
+	clk_disable(kbd->clk);
+
+	kbd->last_key = KEY_RESERVED;
+}
+
+static int __devinit spear_kbd_probe(struct platform_device *pdev)
+{
+	const struct kbd_platform_data *pdata = pdev->dev.platform_data;
+	const struct matrix_keymap_data *keymap;
+	struct spear_kbd *kbd;
+	struct input_dev *input_dev;
+	struct resource *res;
+	int irq;
+	int error;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "Invalid platform data\n");
+		return -EINVAL;
+	}
+
+	keymap = pdata->keymap;
+	if (!keymap) {
+		dev_err(&pdev->dev, "no keymap defined\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "no keyboard resource defined\n");
+		return -EBUSY;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "not able to get irq for the device\n");
+		return irq;
+	}
+
+	kbd = kzalloc(sizeof(*kbd), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!kbd || !input_dev) {
+		dev_err(&pdev->dev, "out of memory\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	kbd->input = input_dev;
+	kbd->irq = irq;
+	kbd->res = request_mem_region(res->start, resource_size(res),
+				      pdev->name);
+	if (!kbd->res) {
+		dev_err(&pdev->dev, "keyboard region already claimed\n");
+		error = -EBUSY;
+		goto err_free_mem;
+	}
+
+	kbd->io_base = ioremap(res->start, resource_size(res));
+	if (!kbd->io_base) {
+		dev_err(&pdev->dev, "ioremap failed for kbd_region\n");
+		error = -ENOMEM;
+		goto err_release_mem_region;
+	}
+
+	kbd->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(kbd->clk)) {
+		error = PTR_ERR(kbd->clk);
+		goto err_iounmap;
+	}
+
+	input_dev->name = "Spear Keyboard";
+	input_dev->phys = "keyboard/input0";
+	input_dev->dev.parent = &pdev->dev;
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor = 0x0001;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0100;
+	input_dev->open = spear_kbd_open;
+	input_dev->close = spear_kbd_close;
+
+	__set_bit(EV_KEY, input_dev->evbit);
+	if (pdata->rep)
+		__set_bit(EV_REP, input_dev->evbit);
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+
+	input_dev->keycode = kbd->keycodes;
+	input_dev->keycodesize = sizeof(kbd->keycodes[0]);
+	input_dev->keycodemax = ARRAY_SIZE(kbd->keycodes);
+
+	matrix_keypad_build_keymap(keymap, ROW_SHIFT,
+			input_dev->keycode, input_dev->keybit);
+
+	input_set_drvdata(input_dev, kbd);
+
+	error = request_irq(irq, spear_kbd_interrupt, 0, "keyboard", kbd);
+	if (error) {
+		dev_err(&pdev->dev, "request_irq fail\n");
+		goto err_put_clk;
+	}
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "Unable to register keyboard device\n");
+		goto err_free_irq;
+	}
+
+	device_init_wakeup(&pdev->dev, 1);
+	platform_set_drvdata(pdev, kbd);
+
+	return 0;
+
+err_free_irq:
+	free_irq(kbd->irq, kbd);
+err_put_clk:
+	clk_put(kbd->clk);
+err_iounmap:
+	iounmap(kbd->io_base);
+err_release_mem_region:
+	release_mem_region(res->start, resource_size(res));
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(kbd);
+
+	return error;
+}
+
+static int __devexit spear_kbd_remove(struct platform_device *pdev)
+{
+	struct spear_kbd *kbd = platform_get_drvdata(pdev);
+
+	free_irq(kbd->irq, kbd);
+	input_unregister_device(kbd->input);
+	clk_put(kbd->clk);
+	iounmap(kbd->io_base);
+	release_mem_region(kbd->res->start, resource_size(kbd->res));
+	kfree(kbd);
+
+	device_init_wakeup(&pdev->dev, 1);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int spear_kbd_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct spear_kbd *kbd = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = kbd->input;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users)
+		clk_enable(kbd->clk);
+
+	if (device_may_wakeup(&pdev->dev))
+		enable_irq_wake(kbd->irq);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static int spear_kbd_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct spear_kbd *kbd = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = kbd->input;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (device_may_wakeup(&pdev->dev))
+		disable_irq_wake(kbd->irq);
+
+	if (input_dev->users)
+		clk_enable(kbd->clk);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static const struct dev_pm_ops spear_kbd_pm_ops = {
+	.suspend	= spear_kbd_suspend,
+	.resume		= spear_kbd_resume,
+};
+#endif
+
+static struct platform_driver spear_kbd_driver = {
+	.probe		= spear_kbd_probe,
+	.remove		= __devexit_p(spear_kbd_remove),
+	.driver		= {
+		.name	= "keyboard",
+		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &spear_kbd_pm_ops,
+#endif
+	},
+};
+
+static int __init spear_kbd_init(void)
+{
+	return platform_driver_register(&spear_kbd_driver);
+}
+module_init(spear_kbd_init);
+
+static void __exit spear_kbd_exit(void)
+{
+	platform_driver_unregister(&spear_kbd_driver);
+}
+module_exit(spear_kbd_exit);
+
+MODULE_AUTHOR("Rajeev Kumar");
+MODULE_DESCRIPTION("SPEAr Keyboard Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/tca6416-keypad.c b/drivers/input/keyboard/tca6416-keypad.c
index 00137bebcf97..800fbccf1f0f 100644
--- a/drivers/input/keyboard/tca6416-keypad.c
+++ b/drivers/input/keyboard/tca6416-keypad.c
@@ -29,6 +29,7 @@
 
 static const struct i2c_device_id tca6416_id[] = {
 	{ "tca6416-keys", 16, },
+	{ "tca6408-keys", 8, },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, tca6416_id);
@@ -46,8 +47,9 @@ struct tca6416_keypad_chip {
 	struct i2c_client *client;
 	struct input_dev *input;
 	struct delayed_work dwork;
-	u16 pinmask;
+	int io_size;
 	int irqnum;
+	u16 pinmask;
 	bool use_polling;
 	struct tca6416_button buttons[0];
 };
@@ -56,7 +58,9 @@ static int tca6416_write_reg(struct tca6416_keypad_chip *chip, int reg, u16 val)
 {
 	int error;
 
-	error = i2c_smbus_write_word_data(chip->client, reg << 1, val);
+	error = chip->io_size > 8 ?
+		i2c_smbus_write_word_data(chip->client, reg << 1, val) :
+		i2c_smbus_write_byte_data(chip->client, reg, val);
 	if (error < 0) {
 		dev_err(&chip->client->dev,
 			"%s failed, reg: %d, val: %d, error: %d\n",
@@ -71,7 +75,9 @@ static int tca6416_read_reg(struct tca6416_keypad_chip *chip, int reg, u16 *val)
 {
 	int retval;
 
-	retval = i2c_smbus_read_word_data(chip->client, reg << 1);
+	retval = chip->io_size > 8 ?
+		 i2c_smbus_read_word_data(chip->client, reg << 1) :
+		 i2c_smbus_read_byte_data(chip->client, reg);
 	if (retval < 0) {
 		dev_err(&chip->client->dev, "%s failed, reg: %d, error: %d\n",
 			__func__, reg, retval);
@@ -224,6 +230,7 @@ static int __devinit tca6416_keypad_probe(struct i2c_client *client,
 
 	chip->client = client;
 	chip->input = input;
+	chip->io_size = id->driver_data;
 	chip->pinmask = pdata->pinmask;
 	chip->use_polling = pdata->use_polling;
 
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index b99b8cbde02f..f0d90172a65f 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -448,4 +448,28 @@ config INPUT_ADXL34X_SPI
 	  To compile this driver as a module, choose M here: the
 	  module will be called adxl34x-spi.
 
+config INPUT_CMA3000
+	tristate "VTI CMA3000 Tri-axis accelerometer"
+	help
+	  Say Y here if you want to use VTI CMA3000_D0x Accelerometer
+	  driver
+
+	  This driver currently only supports I2C interface to the
+	  controller. Also select the I2C method.
+
+	  If unsure, say N
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cma3000_d0x.
+
+config INPUT_CMA3000_I2C
+	tristate "Support I2C bus connection"
+	depends on INPUT_CMA3000 && I2C
+	help
+	  Say Y here if you want to use VTI CMA3000_D0x Accelerometer
+	  through I2C interface.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cma3000_d0x_i2c.
+
 endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 1fe1f6c8b737..35bcfe46555e 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -18,6 +18,8 @@ obj-$(CONFIG_INPUT_ATI_REMOTE2)		+= ati_remote2.o
 obj-$(CONFIG_INPUT_ATLAS_BTNS)		+= atlas_btns.o
 obj-$(CONFIG_INPUT_BFIN_ROTARY)		+= bfin_rotary.o
 obj-$(CONFIG_INPUT_CM109)		+= cm109.o
+obj-$(CONFIG_INPUT_CMA3000)		+= cma3000_d0x.o
+obj-$(CONFIG_INPUT_CMA3000_I2C)		+= cma3000_d0x_i2c.o
 obj-$(CONFIG_INPUT_COBALT_BTNS)		+= cobalt_btns.o
 obj-$(CONFIG_INPUT_DM355EVM)		+= dm355evm_keys.o
 obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
diff --git a/drivers/input/misc/cma3000_d0x.c b/drivers/input/misc/cma3000_d0x.c
new file mode 100644
index 000000000000..1633b6342267
--- /dev/null
+++ b/drivers/input/misc/cma3000_d0x.c
@@ -0,0 +1,398 @@
+/*
+ * VTI CMA3000_D0x Accelerometer driver
+ *
+ * Copyright (C) 2010 Texas Instruments
+ * Author: Hemanth V <hemanthv@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/input/cma3000.h>
+
+#include "cma3000_d0x.h"
+
+#define CMA3000_WHOAMI      0x00
+#define CMA3000_REVID       0x01
+#define CMA3000_CTRL        0x02
+#define CMA3000_STATUS      0x03
+#define CMA3000_RSTR        0x04
+#define CMA3000_INTSTATUS   0x05
+#define CMA3000_DOUTX       0x06
+#define CMA3000_DOUTY       0x07
+#define CMA3000_DOUTZ       0x08
+#define CMA3000_MDTHR       0x09
+#define CMA3000_MDFFTMR     0x0A
+#define CMA3000_FFTHR       0x0B
+
+#define CMA3000_RANGE2G    (1 << 7)
+#define CMA3000_RANGE8G    (0 << 7)
+#define CMA3000_BUSI2C     (0 << 4)
+#define CMA3000_MODEMASK   (7 << 1)
+#define CMA3000_GRANGEMASK (1 << 7)
+
+#define CMA3000_STATUS_PERR    1
+#define CMA3000_INTSTATUS_FFDET (1 << 2)
+
+/* Settling time delay in ms */
+#define CMA3000_SETDELAY    30
+
+/* Delay for clearing interrupt in us */
+#define CMA3000_INTDELAY    44
+
+
+/*
+ * Bit weights in mg for bit 0, other bits need
+ * multipy factor 2^n. Eight bit is the sign bit.
+ */
+#define BIT_TO_2G  18
+#define BIT_TO_8G  71
+
+struct cma3000_accl_data {
+	const struct cma3000_bus_ops *bus_ops;
+	const struct cma3000_platform_data *pdata;
+
+	struct device *dev;
+	struct input_dev *input_dev;
+
+	int bit_to_mg;
+	int irq;
+
+	int g_range;
+	u8 mode;
+
+	struct mutex mutex;
+	bool opened;
+	bool suspended;
+};
+
+#define CMA3000_READ(data, reg, msg) \
+	(data->bus_ops->read(data->dev, reg, msg))
+#define CMA3000_SET(data, reg, val, msg) \
+	((data)->bus_ops->write(data->dev, reg, val, msg))
+
+/*
+ * Conversion for each of the eight modes to g, depending
+ * on G range i.e 2G or 8G. Some modes always operate in
+ * 8G.
+ */
+
+static int mode_to_mg[8][2] = {
+	{ 0, 0 },
+	{ BIT_TO_8G, BIT_TO_2G },
+	{ BIT_TO_8G, BIT_TO_2G },
+	{ BIT_TO_8G, BIT_TO_8G },
+	{ BIT_TO_8G, BIT_TO_8G },
+	{ BIT_TO_8G, BIT_TO_2G },
+	{ BIT_TO_8G, BIT_TO_2G },
+	{ 0, 0},
+};
+
+static void decode_mg(struct cma3000_accl_data *data, int *datax,
+				int *datay, int *dataz)
+{
+	/* Data in 2's complement, convert to mg */
+	*datax = ((s8)*datax) * data->bit_to_mg;
+	*datay = ((s8)*datay) * data->bit_to_mg;
+	*dataz = ((s8)*dataz) * data->bit_to_mg;
+}
+
+static irqreturn_t cma3000_thread_irq(int irq, void *dev_id)
+{
+	struct cma3000_accl_data *data = dev_id;
+	int datax, datay, dataz;
+	u8 ctrl, mode, range, intr_status;
+
+	intr_status = CMA3000_READ(data, CMA3000_INTSTATUS, "interrupt status");
+	if (intr_status < 0)
+		return IRQ_NONE;
+
+	/* Check if free fall is detected, report immediately */
+	if (intr_status & CMA3000_INTSTATUS_FFDET) {
+		input_report_abs(data->input_dev, ABS_MISC, 1);
+		input_sync(data->input_dev);
+	} else {
+		input_report_abs(data->input_dev, ABS_MISC, 0);
+	}
+
+	datax = CMA3000_READ(data, CMA3000_DOUTX, "X");
+	datay = CMA3000_READ(data, CMA3000_DOUTY, "Y");
+	dataz = CMA3000_READ(data, CMA3000_DOUTZ, "Z");
+
+	ctrl = CMA3000_READ(data, CMA3000_CTRL, "ctrl");
+	mode = (ctrl & CMA3000_MODEMASK) >> 1;
+	range = (ctrl & CMA3000_GRANGEMASK) >> 7;
+
+	data->bit_to_mg = mode_to_mg[mode][range];
+
+	/* Interrupt not for this device */
+	if (data->bit_to_mg == 0)
+		return IRQ_NONE;
+
+	/* Decode register values to milli g */
+	decode_mg(data, &datax, &datay, &dataz);
+
+	input_report_abs(data->input_dev, ABS_X, datax);
+	input_report_abs(data->input_dev, ABS_Y, datay);
+	input_report_abs(data->input_dev, ABS_Z, dataz);
+	input_sync(data->input_dev);
+
+	return IRQ_HANDLED;
+}
+
+static int cma3000_reset(struct cma3000_accl_data *data)
+{
+	int val;
+
+	/* Reset sequence */
+	CMA3000_SET(data, CMA3000_RSTR, 0x02, "Reset");
+	CMA3000_SET(data, CMA3000_RSTR, 0x0A, "Reset");
+	CMA3000_SET(data, CMA3000_RSTR, 0x04, "Reset");
+
+	/* Settling time delay */
+	mdelay(10);
+
+	val = CMA3000_READ(data, CMA3000_STATUS, "Status");
+	if (val < 0) {
+		dev_err(data->dev, "Reset failed\n");
+		return val;
+	}
+
+	if (val & CMA3000_STATUS_PERR) {
+		dev_err(data->dev, "Parity Error\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int cma3000_poweron(struct cma3000_accl_data *data)
+{
+	const struct cma3000_platform_data *pdata = data->pdata;
+	u8 ctrl = 0;
+	int ret;
+
+	if (data->g_range == CMARANGE_2G) {
+		ctrl = (data->mode << 1) | CMA3000_RANGE2G;
+	} else if (data->g_range == CMARANGE_8G) {
+		ctrl = (data->mode << 1) | CMA3000_RANGE8G;
+	} else {
+		dev_info(data->dev,
+			 "Invalid G range specified, assuming 8G\n");
+		ctrl = (data->mode << 1) | CMA3000_RANGE8G;
+	}
+
+	ctrl |= data->bus_ops->ctrl_mod;
+
+	CMA3000_SET(data, CMA3000_MDTHR, pdata->mdthr,
+		    "Motion Detect Threshold");
+	CMA3000_SET(data, CMA3000_MDFFTMR, pdata->mdfftmr,
+		    "Time register");
+	CMA3000_SET(data, CMA3000_FFTHR, pdata->ffthr,
+		    "Free fall threshold");
+	ret = CMA3000_SET(data, CMA3000_CTRL, ctrl, "Mode setting");
+	if (ret < 0)
+		return -EIO;
+
+	msleep(CMA3000_SETDELAY);
+
+	return 0;
+}
+
+static int cma3000_poweroff(struct cma3000_accl_data *data)
+{
+	int ret;
+
+	ret = CMA3000_SET(data, CMA3000_CTRL, CMAMODE_POFF, "Mode setting");
+	msleep(CMA3000_SETDELAY);
+
+	return ret;
+}
+
+static int cma3000_open(struct input_dev *input_dev)
+{
+	struct cma3000_accl_data *data = input_get_drvdata(input_dev);
+
+	mutex_lock(&data->mutex);
+
+	if (!data->suspended)
+		cma3000_poweron(data);
+
+	data->opened = true;
+
+	mutex_unlock(&data->mutex);
+
+	return 0;
+}
+
+static void cma3000_close(struct input_dev *input_dev)
+{
+	struct cma3000_accl_data *data = input_get_drvdata(input_dev);
+
+	mutex_lock(&data->mutex);
+
+	if (!data->suspended)
+		cma3000_poweroff(data);
+
+	data->opened = false;
+
+	mutex_unlock(&data->mutex);
+}
+
+void cma3000_suspend(struct cma3000_accl_data *data)
+{
+	mutex_lock(&data->mutex);
+
+	if (!data->suspended && data->opened)
+		cma3000_poweroff(data);
+
+	data->suspended = true;
+
+	mutex_unlock(&data->mutex);
+}
+EXPORT_SYMBOL(cma3000_suspend);
+
+
+void cma3000_resume(struct cma3000_accl_data *data)
+{
+	mutex_lock(&data->mutex);
+
+	if (data->suspended && data->opened)
+		cma3000_poweron(data);
+
+	data->suspended = false;
+
+	mutex_unlock(&data->mutex);
+}
+EXPORT_SYMBOL(cma3000_resume);
+
+struct cma3000_accl_data *cma3000_init(struct device *dev, int irq,
+				       const struct cma3000_bus_ops *bops)
+{
+	const struct cma3000_platform_data *pdata = dev->platform_data;
+	struct cma3000_accl_data *data;
+	struct input_dev *input_dev;
+	int rev;
+	int error;
+
+	if (!pdata) {
+		dev_err(dev, "platform data not found\n");
+		error = -EINVAL;
+		goto err_out;
+	}
+
+
+	/* if no IRQ return error */
+	if (irq == 0) {
+		error = -EINVAL;
+		goto err_out;
+	}
+
+	data = kzalloc(sizeof(struct cma3000_accl_data), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!data || !input_dev) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	data->dev = dev;
+	data->input_dev = input_dev;
+	data->bus_ops = bops;
+	data->pdata = pdata;
+	data->irq = irq;
+	mutex_init(&data->mutex);
+
+	data->mode = pdata->mode;
+	if (data->mode < CMAMODE_DEFAULT || data->mode > CMAMODE_POFF) {
+		data->mode = CMAMODE_MOTDET;
+		dev_warn(dev,
+			 "Invalid mode specified, assuming Motion Detect\n");
+	}
+
+	data->g_range = pdata->g_range;
+	if (data->g_range != CMARANGE_2G && data->g_range != CMARANGE_8G) {
+		dev_info(dev,
+			 "Invalid G range specified, assuming 8G\n");
+		data->g_range = CMARANGE_8G;
+	}
+
+	input_dev->name = "cma3000-accelerometer";
+	input_dev->id.bustype = bops->bustype;
+	input_dev->open = cma3000_open;
+	input_dev->close = cma3000_close;
+
+	 __set_bit(EV_ABS, input_dev->evbit);
+
+	input_set_abs_params(input_dev, ABS_X,
+			-data->g_range, data->g_range, pdata->fuzz_x, 0);
+	input_set_abs_params(input_dev, ABS_Y,
+			-data->g_range, data->g_range, pdata->fuzz_y, 0);
+	input_set_abs_params(input_dev, ABS_Z,
+			-data->g_range, data->g_range, pdata->fuzz_z, 0);
+	input_set_abs_params(input_dev, ABS_MISC, 0, 1, 0, 0);
+
+	input_set_drvdata(input_dev, data);
+
+	error = cma3000_reset(data);
+	if (error)
+		goto err_free_mem;
+
+	rev = CMA3000_READ(data, CMA3000_REVID, "Revid");
+	if (rev < 0) {
+		error = rev;
+		goto err_free_mem;
+	}
+
+	pr_info("CMA3000 Accelerometer: Revision %x\n", rev);
+
+	error = request_threaded_irq(irq, NULL, cma3000_thread_irq,
+				     pdata->irqflags | IRQF_ONESHOT,
+				     "cma3000_d0x", data);
+	if (error) {
+		dev_err(dev, "request_threaded_irq failed\n");
+		goto err_free_mem;
+	}
+
+	error = input_register_device(data->input_dev);
+	if (error) {
+		dev_err(dev, "Unable to register input device\n");
+		goto err_free_irq;
+	}
+
+	return data;
+
+err_free_irq:
+	free_irq(irq, data);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(data);
+err_out:
+	return ERR_PTR(error);
+}
+EXPORT_SYMBOL(cma3000_init);
+
+void cma3000_exit(struct cma3000_accl_data *data)
+{
+	free_irq(data->irq, data);
+	input_unregister_device(data->input_dev);
+	kfree(data);
+}
+EXPORT_SYMBOL(cma3000_exit);
+
+MODULE_DESCRIPTION("CMA3000-D0x Accelerometer Driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Hemanth V <hemanthv@ti.com>");
diff --git a/drivers/input/misc/cma3000_d0x.h b/drivers/input/misc/cma3000_d0x.h
new file mode 100644
index 000000000000..2304ce306e1c
--- /dev/null
+++ b/drivers/input/misc/cma3000_d0x.h
@@ -0,0 +1,42 @@
+/*
+ * VTI CMA3000_D0x Accelerometer driver
+ *
+ * Copyright (C) 2010 Texas Instruments
+ * Author: Hemanth V <hemanthv@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _INPUT_CMA3000_H
+#define _INPUT_CMA3000_H
+
+#include <linux/types.h>
+#include <linux/input.h>
+
+struct device;
+struct cma3000_accl_data;
+
+struct cma3000_bus_ops {
+	u16 bustype;
+	u8 ctrl_mod;
+	int (*read)(struct device *, u8, char *);
+	int (*write)(struct device *, u8, u8, char *);
+};
+
+struct cma3000_accl_data *cma3000_init(struct device *dev, int irq,
+					const struct cma3000_bus_ops *bops);
+void cma3000_exit(struct cma3000_accl_data *);
+void cma3000_suspend(struct cma3000_accl_data *);
+void cma3000_resume(struct cma3000_accl_data *);
+
+#endif
diff --git a/drivers/input/misc/cma3000_d0x_i2c.c b/drivers/input/misc/cma3000_d0x_i2c.c
new file mode 100644
index 000000000000..d100cc5c5783
--- /dev/null
+++ b/drivers/input/misc/cma3000_d0x_i2c.c
@@ -0,0 +1,143 @@
+/*
+ * Implements I2C interface for VTI CMA300_D0x Accelerometer driver
+ *
+ * Copyright (C) 2010 Texas Instruments
+ * Author: Hemanth V <hemanthv@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/input/cma3000.h>
+#include "cma3000_d0x.h"
+
+static int cma3000_i2c_set(struct device *dev,
+			   u8 reg, u8 val, char *msg)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, reg, val);
+	if (ret < 0)
+		dev_err(&client->dev,
+			"%s failed (%s, %d)\n", __func__, msg, ret);
+	return ret;
+}
+
+static int cma3000_i2c_read(struct device *dev, u8 reg, char *msg)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, reg);
+	if (ret < 0)
+		dev_err(&client->dev,
+			"%s failed (%s, %d)\n", __func__, msg, ret);
+	return ret;
+}
+
+static const struct cma3000_bus_ops cma3000_i2c_bops = {
+	.bustype	= BUS_I2C,
+#define CMA3000_BUSI2C     (0 << 4)
+	.ctrl_mod	= CMA3000_BUSI2C,
+	.read		= cma3000_i2c_read,
+	.write		= cma3000_i2c_set,
+};
+
+static int __devinit cma3000_i2c_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	struct cma3000_accl_data *data;
+
+	data = cma3000_init(&client->dev, client->irq, &cma3000_i2c_bops);
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	i2c_set_clientdata(client, data);
+
+	return 0;
+}
+
+static int __devexit cma3000_i2c_remove(struct i2c_client *client)
+{
+	struct cma3000_accl_data *data = i2c_get_clientdata(client);
+
+	cma3000_exit(data);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int cma3000_i2c_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct cma3000_accl_data *data = i2c_get_clientdata(client);
+
+	cma3000_suspend(data);
+
+	return 0;
+}
+
+static int cma3000_i2c_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct cma3000_accl_data *data = i2c_get_clientdata(client);
+
+	cma3000_resume(data);
+
+	return 0;
+}
+
+static const struct dev_pm_ops cma3000_i2c_pm_ops = {
+	.suspend	= cma3000_i2c_suspend,
+	.resume		= cma3000_i2c_resume,
+};
+#endif
+
+static const struct i2c_device_id cma3000_i2c_id[] = {
+	{ "cma3000_d01", 0 },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(i2c, cma3000_i2c_id);
+
+static struct i2c_driver cma3000_i2c_driver = {
+	.probe		= cma3000_i2c_probe,
+	.remove		= __devexit_p(cma3000_i2c_remove),
+	.id_table	= cma3000_i2c_id,
+	.driver = {
+		.name	= "cma3000_i2c_accl",
+		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &cma3000_i2c_pm_ops,
+#endif
+	},
+};
+
+static int __init cma3000_i2c_init(void)
+{
+	return i2c_add_driver(&cma3000_i2c_driver);
+}
+
+static void __exit cma3000_i2c_exit(void)
+{
+	i2c_del_driver(&cma3000_i2c_driver);
+}
+
+module_init(cma3000_i2c_init);
+module_exit(cma3000_i2c_exit);
+
+MODULE_DESCRIPTION("CMA3000-D0x Accelerometer I2C Driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Hemanth V <hemanthv@ti.com>");
diff --git a/drivers/input/misc/pcf8574_keypad.c b/drivers/input/misc/pcf8574_keypad.c
index d1583aea1721..08be1a355956 100644
--- a/drivers/input/misc/pcf8574_keypad.c
+++ b/drivers/input/misc/pcf8574_keypad.c
@@ -169,19 +169,29 @@ static int __devexit pcf8574_kp_remove(struct i2c_client *client)
 }
 
 #ifdef CONFIG_PM
-static int pcf8574_kp_resume(struct i2c_client *client)
+static int pcf8574_kp_resume(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
+
 	enable_irq(client->irq);
 
 	return 0;
 }
 
-static int pcf8574_kp_suspend(struct i2c_client *client, pm_message_t mesg)
+static int pcf8574_kp_suspend(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
+
 	disable_irq(client->irq);
 
 	return 0;
 }
+
+static const struct dev_pm_ops pcf8574_kp_pm_ops = {
+	.suspend	= pcf8574_kp_suspend,
+	.resume		= pcf8574_kp_resume,
+};
+
 #else
 # define pcf8574_kp_resume  NULL
 # define pcf8574_kp_suspend NULL
@@ -197,11 +207,12 @@ static struct i2c_driver pcf8574_kp_driver = {
 	.driver = {
 		.name  = DRV_NAME,
 		.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm = &pcf8574_kp_pm_ops,
+#endif
 	},
 	.probe    = pcf8574_kp_probe,
 	.remove   = __devexit_p(pcf8574_kp_remove),
-	.suspend  = pcf8574_kp_suspend,
-	.resume   = pcf8574_kp_resume,
 	.id_table = pcf8574_kp_id,
 };
 
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index b9410784e6a1..82542a1c1098 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -37,6 +37,7 @@
 #include <linux/fs.h>
 #include <linux/miscdevice.h>
 #include <linux/uinput.h>
+#include <linux/input/mt.h>
 #include "../input-compat.h"
 
 static int uinput_dev_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
@@ -406,8 +407,7 @@ static int uinput_setup_device(struct uinput_device *udev, const char __user *bu
 			goto exit;
 		if (test_bit(ABS_MT_SLOT, dev->absbit)) {
 			int nslot = input_abs_get_max(dev, ABS_MT_SLOT) + 1;
-			input_mt_create_slots(dev, nslot);
-			input_set_events_per_packet(dev, 6 * nslot);
+			input_mt_init_slots(dev, nslot);
 		} else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) {
 			input_set_events_per_packet(dev, 60);
 		}
@@ -680,6 +680,10 @@ static long uinput_ioctl_handler(struct file *file, unsigned int cmd,
 			retval = uinput_set_bit(arg, swbit, SW_MAX);
 			break;
 
+		case UI_SET_PROPBIT:
+			retval = uinput_set_bit(arg, propbit, INPUT_PROP_MAX);
+			break;
+
 		case UI_SET_PHYS:
 			if (udev->state == UIST_CREATED) {
 				retval = -EINVAL;
diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c
index 1d2205b24800..95577c15ae56 100644
--- a/drivers/input/mouse/hgpk.c
+++ b/drivers/input/mouse/hgpk.c
@@ -40,6 +40,8 @@
 #include "psmouse.h"
 #include "hgpk.h"
 
+#define ILLEGAL_XY 999999
+
 static bool tpdebug;
 module_param(tpdebug, bool, 0644);
 MODULE_PARM_DESC(tpdebug, "enable debugging, dumping packets to KERN_DEBUG.");
@@ -47,48 +49,150 @@ MODULE_PARM_DESC(tpdebug, "enable debugging, dumping packets to KERN_DEBUG.");
 static int recalib_delta = 100;
 module_param(recalib_delta, int, 0644);
 MODULE_PARM_DESC(recalib_delta,
-	"packets containing a delta this large will cause a recalibration.");
+	"packets containing a delta this large will be discarded, and a "
+	"recalibration may be scheduled.");
 
-static int jumpy_delay = 1000;
+static int jumpy_delay = 20;
 module_param(jumpy_delay, int, 0644);
 MODULE_PARM_DESC(jumpy_delay,
 	"delay (ms) before recal after jumpiness detected");
 
-static int spew_delay = 1000;
+static int spew_delay = 1;
 module_param(spew_delay, int, 0644);
 MODULE_PARM_DESC(spew_delay,
 	"delay (ms) before recal after packet spew detected");
 
-static int recal_guard_time = 2000;
+static int recal_guard_time;
 module_param(recal_guard_time, int, 0644);
 MODULE_PARM_DESC(recal_guard_time,
 	"interval (ms) during which recal will be restarted if packet received");
 
-static int post_interrupt_delay = 1000;
+static int post_interrupt_delay = 40;
 module_param(post_interrupt_delay, int, 0644);
 MODULE_PARM_DESC(post_interrupt_delay,
 	"delay (ms) before recal after recal interrupt detected");
 
+static bool autorecal = true;
+module_param(autorecal, bool, 0644);
+MODULE_PARM_DESC(autorecal, "enable recalibration in the driver");
+
+static char hgpk_mode_name[16];
+module_param_string(hgpk_mode, hgpk_mode_name, sizeof(hgpk_mode_name), 0644);
+MODULE_PARM_DESC(hgpk_mode,
+	"default hgpk mode: mouse, glidesensor or pentablet");
+
+static int hgpk_default_mode = HGPK_MODE_MOUSE;
+
+static const char * const hgpk_mode_names[] = {
+	[HGPK_MODE_MOUSE] = "Mouse",
+	[HGPK_MODE_GLIDESENSOR] = "GlideSensor",
+	[HGPK_MODE_PENTABLET] = "PenTablet",
+};
+
+static int hgpk_mode_from_name(const char *buf, int len)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(hgpk_mode_names); i++) {
+		const char *name = hgpk_mode_names[i];
+		if (strlen(name) == len && !strncasecmp(name, buf, len))
+			return i;
+	}
+
+	return HGPK_MODE_INVALID;
+}
+
+/*
+ * see if new value is within 20% of half of old value
+ */
+static int approx_half(int curr, int prev)
+{
+	int belowhalf, abovehalf;
+
+	if (curr < 5 || prev < 5)
+		return 0;
+
+	belowhalf = (prev * 8) / 20;
+	abovehalf = (prev * 12) / 20;
+
+	return belowhalf < curr && curr <= abovehalf;
+}
+
 /*
- * When the touchpad gets ultra-sensitive, one can keep their finger 1/2"
- * above the pad and still have it send packets.  This causes a jump cursor
- * when one places their finger on the pad.  We can probably detect the
- * jump as we see a large deltas (>= 100px).  In mouse mode, I've been
- * unable to even come close to 100px deltas during normal usage, so I think
- * this threshold is safe.  If a large delta occurs, trigger a recalibration.
+ * Throw out oddly large delta packets, and any that immediately follow whose
+ * values are each approximately half of the previous.  It seems that the ALPS
+ * firmware emits errant packets, and they get averaged out slowly.
  */
-static void hgpk_jumpy_hack(struct psmouse *psmouse, int x, int y)
+static int hgpk_discard_decay_hack(struct psmouse *psmouse, int x, int y)
 {
 	struct hgpk_data *priv = psmouse->private;
+	int avx, avy;
+	bool do_recal = false;
+
+	avx = abs(x);
+	avy = abs(y);
+
+	/* discard if too big, or half that but > 4 times the prev delta */
+	if (avx > recalib_delta ||
+		(avx > recalib_delta / 2 && ((avx / 4) > priv->xlast))) {
+		hgpk_err(psmouse, "detected %dpx jump in x\n", x);
+		priv->xbigj = avx;
+	} else if (approx_half(avx, priv->xbigj)) {
+		hgpk_err(psmouse, "detected secondary %dpx jump in x\n", x);
+		priv->xbigj = avx;
+		priv->xsaw_secondary++;
+	} else {
+		if (priv->xbigj && priv->xsaw_secondary > 1)
+			do_recal = true;
+		priv->xbigj = 0;
+		priv->xsaw_secondary = 0;
+	}
+
+	if (avy > recalib_delta ||
+		(avy > recalib_delta / 2 && ((avy / 4) > priv->ylast))) {
+		hgpk_err(psmouse, "detected %dpx jump in y\n", y);
+		priv->ybigj = avy;
+	} else if (approx_half(avy, priv->ybigj)) {
+		hgpk_err(psmouse, "detected secondary %dpx jump in y\n", y);
+		priv->ybigj = avy;
+		priv->ysaw_secondary++;
+	} else {
+		if (priv->ybigj && priv->ysaw_secondary > 1)
+			do_recal = true;
+		priv->ybigj = 0;
+		priv->ysaw_secondary = 0;
+	}
 
-	if (abs(x) > recalib_delta || abs(y) > recalib_delta) {
-		hgpk_err(psmouse, ">%dpx jump detected (%d,%d)\n",
-				recalib_delta, x, y);
-		/* My car gets forty rods to the hogshead and that's the
-		 * way I likes it! */
+	priv->xlast = avx;
+	priv->ylast = avy;
+
+	if (do_recal && jumpy_delay) {
+		hgpk_err(psmouse, "scheduling recalibration\n");
 		psmouse_queue_work(psmouse, &priv->recalib_wq,
 				msecs_to_jiffies(jumpy_delay));
 	}
+
+	return priv->xbigj || priv->ybigj;
+}
+
+static void hgpk_reset_spew_detection(struct hgpk_data *priv)
+{
+	priv->spew_count = 0;
+	priv->dupe_count = 0;
+	priv->x_tally = 0;
+	priv->y_tally = 0;
+	priv->spew_flag = NO_SPEW;
+}
+
+static void hgpk_reset_hack_state(struct psmouse *psmouse)
+{
+	struct hgpk_data *priv = psmouse->private;
+
+	priv->abs_x = priv->abs_y = -1;
+	priv->xlast = priv->ylast = ILLEGAL_XY;
+	priv->xbigj = priv->ybigj = 0;
+	priv->xsaw_secondary = priv->ysaw_secondary = 0;
+	hgpk_reset_spew_detection(priv);
 }
 
 /*
@@ -116,20 +220,57 @@ static void hgpk_spewing_hack(struct psmouse *psmouse,
 	if (l || r)
 		return;
 
+	/* don't track spew if the workaround feature has been turned off */
+	if (!spew_delay)
+		return;
+
+	if (abs(x) > 3 || abs(y) > 3) {
+		/* no spew, or spew ended */
+		hgpk_reset_spew_detection(priv);
+		return;
+	}
+
+	/* Keep a tally of the overall delta to the cursor position caused by
+	 * the spew */
 	priv->x_tally += x;
 	priv->y_tally += y;
 
-	if (++priv->count > 100) {
+	switch (priv->spew_flag) {
+	case NO_SPEW:
+		/* we're not spewing, but this packet might be the start */
+		priv->spew_flag = MAYBE_SPEWING;
+
+		/* fall-through */
+
+	case MAYBE_SPEWING:
+		priv->spew_count++;
+
+		if (priv->spew_count < SPEW_WATCH_COUNT)
+			break;
+
+		/* excessive spew detected, request recalibration */
+		priv->spew_flag = SPEW_DETECTED;
+
+		/* fall-through */
+
+	case SPEW_DETECTED:
+		/* only recalibrate when the overall delta to the cursor
+		 * is really small. if the spew is causing significant cursor
+		 * movement, it is probably a case of the user moving the
+		 * cursor very slowly across the screen. */
 		if (abs(priv->x_tally) < 3 && abs(priv->y_tally) < 3) {
-			hgpk_dbg(psmouse, "packet spew detected (%d,%d)\n",
+			hgpk_err(psmouse, "packet spew detected (%d,%d)\n",
 				 priv->x_tally, priv->y_tally);
+			priv->spew_flag = RECALIBRATING;
 			psmouse_queue_work(psmouse, &priv->recalib_wq,
 					   msecs_to_jiffies(spew_delay));
 		}
-		/* reset every 100 packets */
-		priv->count = 0;
-		priv->x_tally = 0;
-		priv->y_tally = 0;
+
+		break;
+	case RECALIBRATING:
+		/* we already detected a spew and requested a recalibration,
+		 * just wait for the queue to kick into action. */
+		break;
 	}
 }
 
@@ -143,25 +284,168 @@ static void hgpk_spewing_hack(struct psmouse *psmouse,
  * swr/swl are the left/right buttons.
  * x-neg/y-neg are the x and y delta negative bits
  * x-over/y-over are the x and y overflow bits
+ *
+ * ---
+ *
+ * HGPK Advanced Mode - single-mode format
+ *
+ * byte 0(PT):  1    1    0    0    1    1     1     1
+ * byte 0(GS):  1    1    1    1    1    1     1     1
+ * byte 1:      0   x6   x5   x4   x3   x2    x1    x0
+ * byte 2(PT):  0    0   x9   x8   x7    ? pt-dsw    0
+ * byte 2(GS):  0  x10   x9   x8   x7    ? gs-dsw pt-dsw
+ * byte 3:      0   y9   y8   y7    1    0   swr   swl
+ * byte 4:      0   y6   y5   y4   y3   y2    y1    y0
+ * byte 5:      0   z6   z5   z4   z3   z2    z1    z0
+ *
+ * ?'s are not defined in the protocol spec, may vary between models.
+ *
+ * swr/swl are the left/right buttons.
+ *
+ * pt-dsw/gs-dsw indicate that the pt/gs sensor is detecting a
+ * pen/finger
  */
-static int hgpk_validate_byte(unsigned char *packet)
+static bool hgpk_is_byte_valid(struct psmouse *psmouse, unsigned char *packet)
 {
-	return (packet[0] & 0x0C) != 0x08;
+	struct hgpk_data *priv = psmouse->private;
+	int pktcnt = psmouse->pktcnt;
+	bool valid;
+
+	switch (priv->mode) {
+	case HGPK_MODE_MOUSE:
+		valid = (packet[0] & 0x0C) == 0x08;
+		break;
+
+	case HGPK_MODE_GLIDESENSOR:
+		valid = pktcnt == 1 ?
+			packet[0] == HGPK_GS : !(packet[pktcnt - 1] & 0x80);
+		break;
+
+	case HGPK_MODE_PENTABLET:
+		valid = pktcnt == 1 ?
+			packet[0] == HGPK_PT : !(packet[pktcnt - 1] & 0x80);
+		break;
+
+	default:
+		valid = false;
+		break;
+	}
+
+	if (!valid)
+		hgpk_dbg(psmouse,
+			 "bad data, mode %d (%d) %02x %02x %02x %02x %02x %02x\n",
+			 priv->mode, pktcnt,
+			 psmouse->packet[0], psmouse->packet[1],
+			 psmouse->packet[2], psmouse->packet[3],
+			 psmouse->packet[4], psmouse->packet[5]);
+
+	return valid;
 }
 
-static void hgpk_process_packet(struct psmouse *psmouse)
+static void hgpk_process_advanced_packet(struct psmouse *psmouse)
 {
-	struct input_dev *dev = psmouse->dev;
+	struct hgpk_data *priv = psmouse->private;
+	struct input_dev *idev = psmouse->dev;
 	unsigned char *packet = psmouse->packet;
-	int x, y, left, right;
+	int down = !!(packet[2] & 2);
+	int left = !!(packet[3] & 1);
+	int right = !!(packet[3] & 2);
+	int x = packet[1] | ((packet[2] & 0x78) << 4);
+	int y = packet[4] | ((packet[3] & 0x70) << 3);
+
+	if (priv->mode == HGPK_MODE_GLIDESENSOR) {
+		int pt_down = !!(packet[2] & 1);
+		int finger_down = !!(packet[2] & 2);
+		int z = packet[5];
+
+		input_report_abs(idev, ABS_PRESSURE, z);
+		if (tpdebug)
+			hgpk_dbg(psmouse, "pd=%d fd=%d z=%d",
+				 pt_down, finger_down, z);
+	} else {
+		/*
+		 * PenTablet mode does not report pressure, so we don't
+		 * report it here
+		 */
+		if (tpdebug)
+			hgpk_dbg(psmouse, "pd=%d ", down);
+	}
+
+	if (tpdebug)
+		hgpk_dbg(psmouse, "l=%d r=%d x=%d y=%d\n", left, right, x, y);
+
+	input_report_key(idev, BTN_TOUCH, down);
+	input_report_key(idev, BTN_LEFT, left);
+	input_report_key(idev, BTN_RIGHT, right);
+
+	/*
+	 * If this packet says that the finger was removed, reset our position
+	 * tracking so that we don't erroneously detect a jump on next press.
+	 */
+	if (!down) {
+		hgpk_reset_hack_state(psmouse);
+		goto done;
+	}
+
+	/*
+	 * Weed out duplicate packets (we get quite a few, and they mess up
+	 * our jump detection)
+	 */
+	if (x == priv->abs_x && y == priv->abs_y) {
+		if (++priv->dupe_count > SPEW_WATCH_COUNT) {
+			if (tpdebug)
+				hgpk_dbg(psmouse, "hard spew detected\n");
+			priv->spew_flag = RECALIBRATING;
+			psmouse_queue_work(psmouse, &priv->recalib_wq,
+					   msecs_to_jiffies(spew_delay));
+		}
+		goto done;
+	}
 
-	left = packet[0] & 1;
-	right = (packet[0] >> 1) & 1;
+	/* not a duplicate, continue with position reporting */
+	priv->dupe_count = 0;
+
+	/* Don't apply hacks in PT mode, it seems reliable */
+	if (priv->mode != HGPK_MODE_PENTABLET && priv->abs_x != -1) {
+		int x_diff = priv->abs_x - x;
+		int y_diff = priv->abs_y - y;
+		if (hgpk_discard_decay_hack(psmouse, x_diff, y_diff)) {
+			if (tpdebug)
+				hgpk_dbg(psmouse, "discarding\n");
+			goto done;
+		}
+		hgpk_spewing_hack(psmouse, left, right, x_diff, y_diff);
+	}
 
-	x = packet[1] - ((packet[0] << 4) & 0x100);
-	y = ((packet[0] << 3) & 0x100) - packet[2];
+	input_report_abs(idev, ABS_X, x);
+	input_report_abs(idev, ABS_Y, y);
+	priv->abs_x = x;
+	priv->abs_y = y;
+
+done:
+	input_sync(idev);
+}
+
+static void hgpk_process_simple_packet(struct psmouse *psmouse)
+{
+	struct input_dev *dev = psmouse->dev;
+	unsigned char *packet = psmouse->packet;
+	int left = packet[0] & 1;
+	int right = (packet[0] >> 1) & 1;
+	int x = packet[1] - ((packet[0] << 4) & 0x100);
+	int y = ((packet[0] << 3) & 0x100) - packet[2];
+
+	if (packet[0] & 0xc0)
+		hgpk_dbg(psmouse,
+			 "overflow -- 0x%02x 0x%02x 0x%02x\n",
+			 packet[0], packet[1], packet[2]);
+
+	if (hgpk_discard_decay_hack(psmouse, x, y)) {
+		if (tpdebug)
+			hgpk_dbg(psmouse, "discarding\n");
+		return;
+	}
 
-	hgpk_jumpy_hack(psmouse, x, y);
 	hgpk_spewing_hack(psmouse, left, right, x, y);
 
 	if (tpdebug)
@@ -180,15 +464,14 @@ static psmouse_ret_t hgpk_process_byte(struct psmouse *psmouse)
 {
 	struct hgpk_data *priv = psmouse->private;
 
-	if (hgpk_validate_byte(psmouse->packet)) {
-		hgpk_dbg(psmouse, "%s: (%d) %02x %02x %02x\n",
-				__func__, psmouse->pktcnt, psmouse->packet[0],
-				psmouse->packet[1], psmouse->packet[2]);
+	if (!hgpk_is_byte_valid(psmouse, psmouse->packet))
 		return PSMOUSE_BAD_DATA;
-	}
 
 	if (psmouse->pktcnt >= psmouse->pktsize) {
-		hgpk_process_packet(psmouse);
+		if (priv->mode == HGPK_MODE_MOUSE)
+			hgpk_process_simple_packet(psmouse);
+		else
+			hgpk_process_advanced_packet(psmouse);
 		return PSMOUSE_FULL_PACKET;
 	}
 
@@ -210,33 +493,176 @@ static psmouse_ret_t hgpk_process_byte(struct psmouse *psmouse)
 	return PSMOUSE_GOOD_DATA;
 }
 
+static int hgpk_select_mode(struct psmouse *psmouse)
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	struct hgpk_data *priv = psmouse->private;
+	int i;
+	int cmd;
+
+	/*
+	 * 4 disables to enable advanced mode
+	 * then 3 0xf2 bytes as the preamble for GS/PT selection
+	 */
+	const int advanced_init[] = {
+		PSMOUSE_CMD_DISABLE, PSMOUSE_CMD_DISABLE,
+		PSMOUSE_CMD_DISABLE, PSMOUSE_CMD_DISABLE,
+		0xf2, 0xf2, 0xf2,
+	};
+
+	switch (priv->mode) {
+	case HGPK_MODE_MOUSE:
+		psmouse->pktsize = 3;
+		break;
+
+	case HGPK_MODE_GLIDESENSOR:
+	case HGPK_MODE_PENTABLET:
+		psmouse->pktsize = 6;
+
+		/* Switch to 'Advanced mode.', four disables in a row. */
+		for (i = 0; i < ARRAY_SIZE(advanced_init); i++)
+			if (ps2_command(ps2dev, NULL, advanced_init[i]))
+				return -EIO;
+
+		/* select between GlideSensor (mouse) or PenTablet */
+		cmd = priv->mode == HGPK_MODE_GLIDESENSOR ?
+			PSMOUSE_CMD_SETSCALE11 : PSMOUSE_CMD_SETSCALE21;
+
+		if (ps2_command(ps2dev, NULL, cmd))
+			return -EIO;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void hgpk_setup_input_device(struct input_dev *input,
+				    struct input_dev *old_input,
+				    enum hgpk_mode mode)
+{
+	if (old_input) {
+		input->name = old_input->name;
+		input->phys = old_input->phys;
+		input->id = old_input->id;
+		input->dev.parent = old_input->dev.parent;
+	}
+
+	memset(input->evbit, 0, sizeof(input->evbit));
+	memset(input->relbit, 0, sizeof(input->relbit));
+	memset(input->keybit, 0, sizeof(input->keybit));
+
+	/* All modes report left and right buttons */
+	__set_bit(EV_KEY, input->evbit);
+	__set_bit(BTN_LEFT, input->keybit);
+	__set_bit(BTN_RIGHT, input->keybit);
+
+	switch (mode) {
+	case HGPK_MODE_MOUSE:
+		__set_bit(EV_REL, input->evbit);
+		__set_bit(REL_X, input->relbit);
+		__set_bit(REL_Y, input->relbit);
+		break;
+
+	case HGPK_MODE_GLIDESENSOR:
+		__set_bit(BTN_TOUCH, input->keybit);
+		__set_bit(BTN_TOOL_FINGER, input->keybit);
+
+		__set_bit(EV_ABS, input->evbit);
+
+		/* GlideSensor has pressure sensor, PenTablet does not */
+		input_set_abs_params(input, ABS_PRESSURE, 0, 15, 0, 0);
+
+		/* From device specs */
+		input_set_abs_params(input, ABS_X, 0, 399, 0, 0);
+		input_set_abs_params(input, ABS_Y, 0, 290, 0, 0);
+
+		/* Calculated by hand based on usable size (52mm x 38mm) */
+		input_abs_set_res(input, ABS_X, 8);
+		input_abs_set_res(input, ABS_Y, 8);
+		break;
+
+	case HGPK_MODE_PENTABLET:
+		__set_bit(BTN_TOUCH, input->keybit);
+		__set_bit(BTN_TOOL_FINGER, input->keybit);
+
+		__set_bit(EV_ABS, input->evbit);
+
+		/* From device specs */
+		input_set_abs_params(input, ABS_X, 0, 999, 0, 0);
+		input_set_abs_params(input, ABS_Y, 5, 239, 0, 0);
+
+		/* Calculated by hand based on usable size (156mm x 38mm) */
+		input_abs_set_res(input, ABS_X, 6);
+		input_abs_set_res(input, ABS_Y, 8);
+		break;
+
+	default:
+		BUG();
+	}
+}
+
+static int hgpk_reset_device(struct psmouse *psmouse, bool recalibrate)
+{
+	int err;
+
+	psmouse_reset(psmouse);
+
+	if (recalibrate) {
+		struct ps2dev *ps2dev = &psmouse->ps2dev;
+
+		/* send the recalibrate request */
+		if (ps2_command(ps2dev, NULL, 0xf5) ||
+		    ps2_command(ps2dev, NULL, 0xf5) ||
+		    ps2_command(ps2dev, NULL, 0xe6) ||
+		    ps2_command(ps2dev, NULL, 0xf5)) {
+			return -1;
+		}
+
+		/* according to ALPS, 150mS is required for recalibration */
+		msleep(150);
+	}
+
+	err = hgpk_select_mode(psmouse);
+	if (err) {
+		hgpk_err(psmouse, "failed to select mode\n");
+		return err;
+	}
+
+	hgpk_reset_hack_state(psmouse);
+
+	return 0;
+}
+
 static int hgpk_force_recalibrate(struct psmouse *psmouse)
 {
 	struct ps2dev *ps2dev = &psmouse->ps2dev;
 	struct hgpk_data *priv = psmouse->private;
+	int err;
 
 	/* C-series touchpads added the recalibrate command */
 	if (psmouse->model < HGPK_MODEL_C)
 		return 0;
 
+	if (!autorecal) {
+		hgpk_dbg(psmouse, "recalibrations disabled, ignoring\n");
+		return 0;
+	}
+
+	hgpk_dbg(psmouse, "recalibrating touchpad..\n");
+
 	/* we don't want to race with the irq handler, nor with resyncs */
 	psmouse_set_state(psmouse, PSMOUSE_INITIALIZING);
 
 	/* start by resetting the device */
-	psmouse_reset(psmouse);
-
-	/* send the recalibrate request */
-	if (ps2_command(ps2dev, NULL, 0xf5) ||
-	    ps2_command(ps2dev, NULL, 0xf5) ||
-	    ps2_command(ps2dev, NULL, 0xe6) ||
-	    ps2_command(ps2dev, NULL, 0xf5)) {
-		return -1;
-	}
-
-	/* according to ALPS, 150mS is required for recalibration */
-	msleep(150);
+	err = hgpk_reset_device(psmouse, true);
+	if (err)
+		return err;
 
-	/* XXX: If a finger is down during this delay, recalibration will
+	/*
+	 * XXX: If a finger is down during this delay, recalibration will
 	 * detect capacitance incorrectly.  This is a hardware bug, and
 	 * we don't have a good way to deal with it.  The 2s window stuff
 	 * (below) is our best option for now.
@@ -247,25 +673,35 @@ static int hgpk_force_recalibrate(struct psmouse *psmouse)
 
 	psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
 
-	/* After we recalibrate, we shouldn't get any packets for 2s.  If
-	 * we do, it's likely that someone's finger was on the touchpad.
-	 * If someone's finger *was* on the touchpad, it's probably
-	 * miscalibrated.  So, we should schedule another recalibration
+	if (tpdebug)
+		hgpk_dbg(psmouse, "touchpad reactivated\n");
+
+	/*
+	 * If we get packets right away after recalibrating, it's likely
+	 * that a finger was on the touchpad.  If so, it's probably
+	 * miscalibrated, so we optionally schedule another.
 	 */
-	priv->recalib_window = jiffies +  msecs_to_jiffies(recal_guard_time);
+	if (recal_guard_time)
+		priv->recalib_window = jiffies +
+			msecs_to_jiffies(recal_guard_time);
 
 	return 0;
 }
 
 /*
- * This kills power to the touchpad; according to ALPS, current consumption
- * goes down to 50uA after running this.  To turn power back on, we drive
- * MS-DAT low.
+ * This puts the touchpad in a power saving mode; according to ALPS, current
+ * consumption goes down to 50uA after running this.  To turn power back on,
+ * we drive MS-DAT low.  Measuring with a 1mA resolution ammeter says that
+ * the current on the SUS_3.3V rail drops from 3mA or 4mA to 0 when we do this.
+ *
+ * We have no formal spec that details this operation -- the low-power
+ * sequence came from a long-lost email trail.
  */
-static int hgpk_toggle_power(struct psmouse *psmouse, int enable)
+static int hgpk_toggle_powersave(struct psmouse *psmouse, int enable)
 {
 	struct ps2dev *ps2dev = &psmouse->ps2dev;
 	int timeo;
+	int err;
 
 	/* Added on D-series touchpads */
 	if (psmouse->model < HGPK_MODEL_D)
@@ -279,24 +715,27 @@ static int hgpk_toggle_power(struct psmouse *psmouse, int enable)
 		 * the controller.  Once we get an ACK back from it, it
 		 * means we can continue with the touchpad re-init.  ALPS
 		 * tells us that 1s should be long enough, so set that as
-		 * the upper bound.
+		 * the upper bound. (in practice, it takes about 3 loops.)
 		 */
 		for (timeo = 20; timeo > 0; timeo--) {
 			if (!ps2_sendbyte(&psmouse->ps2dev,
 					PSMOUSE_CMD_DISABLE, 20))
 				break;
-			msleep(50);
+			msleep(25);
 		}
 
-		psmouse_reset(psmouse);
+		err = hgpk_reset_device(psmouse, false);
+		if (err) {
+			hgpk_err(psmouse, "Failed to reset device!\n");
+			return err;
+		}
 
 		/* should be all set, enable the touchpad */
 		ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE);
 		psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
-
+		hgpk_dbg(psmouse, "Touchpad powered up.\n");
 	} else {
 		hgpk_dbg(psmouse, "Powering off touchpad.\n");
-		psmouse_set_state(psmouse, PSMOUSE_IGNORE);
 
 		if (ps2_command(ps2dev, NULL, 0xec) ||
 		    ps2_command(ps2dev, NULL, 0xec) ||
@@ -304,6 +743,8 @@ static int hgpk_toggle_power(struct psmouse *psmouse, int enable)
 			return -1;
 		}
 
+		psmouse_set_state(psmouse, PSMOUSE_IGNORE);
+
 		/* probably won't see an ACK, the touchpad will be off */
 		ps2_sendbyte(&psmouse->ps2dev, 0xec, 20);
 	}
@@ -319,17 +760,20 @@ static int hgpk_poll(struct psmouse *psmouse)
 
 static int hgpk_reconnect(struct psmouse *psmouse)
 {
-	/* During suspend/resume the ps2 rails remain powered.  We don't want
+	struct hgpk_data *priv = psmouse->private;
+
+	/*
+	 * During suspend/resume the ps2 rails remain powered.  We don't want
 	 * to do a reset because it's flush data out of buffers; however,
-	 * earlier prototypes (B1) had some brokenness that required a reset. */
+	 * earlier prototypes (B1) had some brokenness that required a reset.
+	 */
 	if (olpc_board_at_least(olpc_board(0xb2)))
 		if (psmouse->ps2dev.serio->dev.power.power_state.event !=
 				PM_EVENT_ON)
 			return 0;
 
-	psmouse_reset(psmouse);
-
-	return 0;
+	priv->powered = 1;
+	return hgpk_reset_device(psmouse, false);
 }
 
 static ssize_t hgpk_show_powered(struct psmouse *psmouse, void *data, char *buf)
@@ -355,7 +799,7 @@ static ssize_t hgpk_set_powered(struct psmouse *psmouse, void *data,
 		 * hgpk_toggle_power will deal w/ state so
 		 * we're not racing w/ irq
 		 */
-		err = hgpk_toggle_power(psmouse, value);
+		err = hgpk_toggle_powersave(psmouse, value);
 		if (!err)
 			priv->powered = value;
 	}
@@ -366,6 +810,65 @@ static ssize_t hgpk_set_powered(struct psmouse *psmouse, void *data,
 __PSMOUSE_DEFINE_ATTR(powered, S_IWUSR | S_IRUGO, NULL,
 		      hgpk_show_powered, hgpk_set_powered, false);
 
+static ssize_t attr_show_mode(struct psmouse *psmouse, void *data, char *buf)
+{
+	struct hgpk_data *priv = psmouse->private;
+
+	return sprintf(buf, "%s\n", hgpk_mode_names[priv->mode]);
+}
+
+static ssize_t attr_set_mode(struct psmouse *psmouse, void *data,
+			     const char *buf, size_t len)
+{
+	struct hgpk_data *priv = psmouse->private;
+	enum hgpk_mode old_mode = priv->mode;
+	enum hgpk_mode new_mode = hgpk_mode_from_name(buf, len);
+	struct input_dev *old_dev = psmouse->dev;
+	struct input_dev *new_dev;
+	int err;
+
+	if (new_mode == HGPK_MODE_INVALID)
+		return -EINVAL;
+
+	if (old_mode == new_mode)
+		return len;
+
+	new_dev = input_allocate_device();
+	if (!new_dev)
+		return -ENOMEM;
+
+	psmouse_set_state(psmouse, PSMOUSE_INITIALIZING);
+
+	/* Switch device into the new mode */
+	priv->mode = new_mode;
+	err = hgpk_reset_device(psmouse, false);
+	if (err)
+		goto err_try_restore;
+
+	hgpk_setup_input_device(new_dev, old_dev, new_mode);
+
+	psmouse_set_state(psmouse, PSMOUSE_CMD_MODE);
+
+	err = input_register_device(new_dev);
+	if (err)
+		goto err_try_restore;
+
+	psmouse->dev = new_dev;
+	input_unregister_device(old_dev);
+
+	return len;
+
+err_try_restore:
+	input_free_device(new_dev);
+	priv->mode = old_mode;
+	hgpk_reset_device(psmouse, false);
+
+	return err;
+}
+
+PSMOUSE_DEFINE_ATTR(hgpk_mode, S_IWUSR | S_IRUGO, NULL,
+		    attr_show_mode, attr_set_mode);
+
 static ssize_t hgpk_trigger_recal_show(struct psmouse *psmouse,
 		void *data, char *buf)
 {
@@ -401,6 +904,8 @@ static void hgpk_disconnect(struct psmouse *psmouse)
 
 	device_remove_file(&psmouse->ps2dev.serio->dev,
 			   &psmouse_attr_powered.dattr);
+	device_remove_file(&psmouse->ps2dev.serio->dev,
+			   &psmouse_attr_hgpk_mode.dattr);
 
 	if (psmouse->model >= HGPK_MODEL_C)
 		device_remove_file(&psmouse->ps2dev.serio->dev,
@@ -416,14 +921,13 @@ static void hgpk_recalib_work(struct work_struct *work)
 	struct hgpk_data *priv = container_of(w, struct hgpk_data, recalib_wq);
 	struct psmouse *psmouse = priv->psmouse;
 
-	hgpk_dbg(psmouse, "recalibrating touchpad..\n");
-
 	if (hgpk_force_recalibrate(psmouse))
 		hgpk_err(psmouse, "recalibration failed!\n");
 }
 
 static int hgpk_register(struct psmouse *psmouse)
 {
+	struct hgpk_data *priv = psmouse->private;
 	int err;
 
 	/* register handlers */
@@ -431,13 +935,14 @@ static int hgpk_register(struct psmouse *psmouse)
 	psmouse->poll = hgpk_poll;
 	psmouse->disconnect = hgpk_disconnect;
 	psmouse->reconnect = hgpk_reconnect;
-	psmouse->pktsize = 3;
 
 	/* Disable the idle resync. */
 	psmouse->resync_time = 0;
 	/* Reset after a lot of bad bytes. */
 	psmouse->resetafter = 1024;
 
+	hgpk_setup_input_device(psmouse->dev, NULL, priv->mode);
+
 	err = device_create_file(&psmouse->ps2dev.serio->dev,
 				 &psmouse_attr_powered.dattr);
 	if (err) {
@@ -445,6 +950,13 @@ static int hgpk_register(struct psmouse *psmouse)
 		return err;
 	}
 
+	err = device_create_file(&psmouse->ps2dev.serio->dev,
+				 &psmouse_attr_hgpk_mode.dattr);
+	if (err) {
+		hgpk_err(psmouse, "Failed creating 'hgpk_mode' sysfs node\n");
+		goto err_remove_powered;
+	}
+
 	/* C-series touchpads added the recalibrate command */
 	if (psmouse->model >= HGPK_MODEL_C) {
 		err = device_create_file(&psmouse->ps2dev.serio->dev,
@@ -452,30 +964,40 @@ static int hgpk_register(struct psmouse *psmouse)
 		if (err) {
 			hgpk_err(psmouse,
 				"Failed creating 'recalibrate' sysfs node\n");
-			device_remove_file(&psmouse->ps2dev.serio->dev,
-					&psmouse_attr_powered.dattr);
-			return err;
+			goto err_remove_mode;
 		}
 	}
 
 	return 0;
+
+err_remove_mode:
+	device_remove_file(&psmouse->ps2dev.serio->dev,
+			   &psmouse_attr_hgpk_mode.dattr);
+err_remove_powered:
+	device_remove_file(&psmouse->ps2dev.serio->dev,
+			   &psmouse_attr_powered.dattr);
+	return err;
 }
 
 int hgpk_init(struct psmouse *psmouse)
 {
 	struct hgpk_data *priv;
-	int err = -ENOMEM;
+	int err;
 
 	priv = kzalloc(sizeof(struct hgpk_data), GFP_KERNEL);
-	if (!priv)
+	if (!priv) {
+		err = -ENOMEM;
 		goto alloc_fail;
+	}
 
 	psmouse->private = priv;
+
 	priv->psmouse = psmouse;
 	priv->powered = true;
+	priv->mode = hgpk_default_mode;
 	INIT_DELAYED_WORK(&priv->recalib_wq, hgpk_recalib_work);
 
-	err = psmouse_reset(psmouse);
+	err = hgpk_reset_device(psmouse, false);
 	if (err)
 		goto init_fail;
 
@@ -531,3 +1053,14 @@ int hgpk_detect(struct psmouse *psmouse, bool set_properties)
 
 	return 0;
 }
+
+void hgpk_module_init(void)
+{
+	hgpk_default_mode = hgpk_mode_from_name(hgpk_mode_name,
+						strlen(hgpk_mode_name));
+	if (hgpk_default_mode == HGPK_MODE_INVALID) {
+		hgpk_default_mode = HGPK_MODE_MOUSE;
+		strlcpy(hgpk_mode_name, hgpk_mode_names[HGPK_MODE_MOUSE],
+			sizeof(hgpk_mode_name));
+	}
+}
diff --git a/drivers/input/mouse/hgpk.h b/drivers/input/mouse/hgpk.h
index d61cfd3ee9cb..311c0e87fcbf 100644
--- a/drivers/input/mouse/hgpk.h
+++ b/drivers/input/mouse/hgpk.h
@@ -5,6 +5,9 @@
 #ifndef _HGPK_H
 #define _HGPK_H
 
+#define HGPK_GS		0xff       /* The GlideSensor */
+#define HGPK_PT		0xcf       /* The PenTablet */
+
 enum hgpk_model_t {
 	HGPK_MODEL_PREA = 0x0a,	/* pre-B1s */
 	HGPK_MODEL_A = 0x14,	/* found on B1s, PT disabled in hardware */
@@ -13,12 +16,34 @@ enum hgpk_model_t {
 	HGPK_MODEL_D = 0x50,	/* C1, mass production */
 };
 
+enum hgpk_spew_flag {
+	NO_SPEW,
+	MAYBE_SPEWING,
+	SPEW_DETECTED,
+	RECALIBRATING,
+};
+
+#define SPEW_WATCH_COUNT 42  /* at 12ms/packet, this is 1/2 second */
+
+enum hgpk_mode {
+	HGPK_MODE_MOUSE,
+	HGPK_MODE_GLIDESENSOR,
+	HGPK_MODE_PENTABLET,
+	HGPK_MODE_INVALID
+};
+
 struct hgpk_data {
 	struct psmouse *psmouse;
+	enum hgpk_mode mode;
 	bool powered;
-	int count, x_tally, y_tally;	/* hardware workaround stuff */
+	enum hgpk_spew_flag spew_flag;
+	int spew_count, x_tally, y_tally;	/* spew detection */
 	unsigned long recalib_window;
 	struct delayed_work recalib_wq;
+	int abs_x, abs_y;
+	int dupe_count;
+	int xbigj, ybigj, xlast, ylast; /* jumpiness detection */
+	int xsaw_secondary, ysaw_secondary; /* jumpiness detection */
 };
 
 #define hgpk_dbg(psmouse, format, arg...)		\
@@ -33,9 +58,13 @@ struct hgpk_data {
 	dev_notice(&(psmouse)->ps2dev.serio->dev, format, ## arg)
 
 #ifdef CONFIG_MOUSE_PS2_OLPC
+void hgpk_module_init(void);
 int hgpk_detect(struct psmouse *psmouse, bool set_properties);
 int hgpk_init(struct psmouse *psmouse);
 #else
+static inline void hgpk_module_init(void)
+{
+}
 static inline int hgpk_detect(struct psmouse *psmouse, bool set_properties)
 {
 	return -ENODEV;
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index cd9d0c97e429..3f74baee102b 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -1711,6 +1711,7 @@ static int __init psmouse_init(void)
 
 	lifebook_module_init();
 	synaptics_module_init();
+	hgpk_module_init();
 
 	kpsmoused_wq = create_singlethread_workqueue("kpsmoused");
 	if (!kpsmoused_wq) {
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 2e300a460556..da392c22fc6c 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -25,7 +25,7 @@
 
 #include <linux/module.h>
 #include <linux/dmi.h>
-#include <linux/input.h>
+#include <linux/input/mt.h>
 #include <linux/serio.h>
 #include <linux/libps2.h>
 #include <linux/slab.h>
@@ -279,6 +279,25 @@ static void synaptics_set_rate(struct psmouse *psmouse, unsigned int rate)
 	synaptics_mode_cmd(psmouse, priv->mode);
 }
 
+static int synaptics_set_advanced_gesture_mode(struct psmouse *psmouse)
+{
+	static unsigned char param = 0xc8;
+	struct synaptics_data *priv = psmouse->private;
+
+	if (!SYN_CAP_ADV_GESTURE(priv->ext_cap_0c))
+		return 0;
+
+	if (psmouse_sliced_command(psmouse, SYN_QUE_MODEL))
+		return -1;
+	if (ps2_command(&psmouse->ps2dev, &param, PSMOUSE_CMD_SETRATE))
+		return -1;
+
+	/* Advanced gesture mode also sends multi finger data */
+	priv->capabilities |= BIT(1);
+
+	return 0;
+}
+
 /*****************************************************************************
  *	Synaptics pass-through PS/2 port support
  ****************************************************************************/
@@ -380,7 +399,9 @@ static void synaptics_pt_create(struct psmouse *psmouse)
  *	Functions to interpret the absolute mode packets
  ****************************************************************************/
 
-static void synaptics_parse_hw_state(unsigned char buf[], struct synaptics_data *priv, struct synaptics_hw_state *hw)
+static int synaptics_parse_hw_state(const unsigned char buf[],
+				    struct synaptics_data *priv,
+				    struct synaptics_hw_state *hw)
 {
 	memset(hw, 0, sizeof(struct synaptics_hw_state));
 
@@ -397,6 +418,14 @@ static void synaptics_parse_hw_state(unsigned char buf[], struct synaptics_data
 			 ((buf[0] & 0x04) >> 1) |
 			 ((buf[3] & 0x04) >> 2));
 
+		if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) && hw->w == 2) {
+			/* Gesture packet: (x, y, z) at half resolution */
+			priv->mt.x = (((buf[4] & 0x0f) << 8) | buf[1]) << 1;
+			priv->mt.y = (((buf[4] & 0xf0) << 4) | buf[2]) << 1;
+			priv->mt.z = ((buf[3] & 0x30) | (buf[5] & 0x0f)) << 1;
+			return 1;
+		}
+
 		hw->left  = (buf[0] & 0x01) ? 1 : 0;
 		hw->right = (buf[0] & 0x02) ? 1 : 0;
 
@@ -452,6 +481,36 @@ static void synaptics_parse_hw_state(unsigned char buf[], struct synaptics_data
 		hw->left  = (buf[0] & 0x01) ? 1 : 0;
 		hw->right = (buf[0] & 0x02) ? 1 : 0;
 	}
+
+	return 0;
+}
+
+static void set_slot(struct input_dev *dev, int slot, bool active, int x, int y)
+{
+	input_mt_slot(dev, slot);
+	input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
+	if (active) {
+		input_report_abs(dev, ABS_MT_POSITION_X, x);
+		input_report_abs(dev, ABS_MT_POSITION_Y,
+				 YMAX_NOMINAL + YMIN_NOMINAL - y);
+	}
+}
+
+static void synaptics_report_semi_mt_data(struct input_dev *dev,
+					  const struct synaptics_hw_state *a,
+					  const struct synaptics_hw_state *b,
+					  int num_fingers)
+{
+	if (num_fingers >= 2) {
+		set_slot(dev, 0, true, min(a->x, b->x), min(a->y, b->y));
+		set_slot(dev, 1, true, max(a->x, b->x), max(a->y, b->y));
+	} else if (num_fingers == 1) {
+		set_slot(dev, 0, true, a->x, a->y);
+		set_slot(dev, 1, false, 0, 0);
+	} else {
+		set_slot(dev, 0, false, 0, 0);
+		set_slot(dev, 1, false, 0, 0);
+	}
 }
 
 /*
@@ -466,7 +525,8 @@ static void synaptics_process_packet(struct psmouse *psmouse)
 	int finger_width;
 	int i;
 
-	synaptics_parse_hw_state(psmouse->packet, priv, &hw);
+	if (synaptics_parse_hw_state(psmouse->packet, priv, &hw))
+		return;
 
 	if (hw.scroll) {
 		priv->scroll += hw.scroll;
@@ -488,7 +548,7 @@ static void synaptics_process_packet(struct psmouse *psmouse)
 		return;
 	}
 
-	if (hw.z > 0) {
+	if (hw.z > 0 && hw.x > 1) {
 		num_fingers = 1;
 		finger_width = 5;
 		if (SYN_CAP_EXTENDED(priv->capabilities)) {
@@ -512,6 +572,9 @@ static void synaptics_process_packet(struct psmouse *psmouse)
 		finger_width = 0;
 	}
 
+	if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c))
+		synaptics_report_semi_mt_data(dev, &hw, &priv->mt, num_fingers);
+
 	/* Post events
 	 * BTN_TOUCH has to be first as mousedev relies on it when doing
 	 * absolute -> relative conversion
@@ -519,7 +582,7 @@ static void synaptics_process_packet(struct psmouse *psmouse)
 	if (hw.z > 30) input_report_key(dev, BTN_TOUCH, 1);
 	if (hw.z < 25) input_report_key(dev, BTN_TOUCH, 0);
 
-	if (hw.z > 0) {
+	if (num_fingers > 0) {
 		input_report_abs(dev, ABS_X, hw.x);
 		input_report_abs(dev, ABS_Y, YMAX_NOMINAL + YMIN_NOMINAL - hw.y);
 	}
@@ -622,6 +685,8 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
 {
 	int i;
 
+	__set_bit(INPUT_PROP_POINTER, dev->propbit);
+
 	__set_bit(EV_ABS, dev->evbit);
 	input_set_abs_params(dev, ABS_X,
 			     XMIN_NOMINAL, priv->x_max ?: XMAX_NOMINAL, 0, 0);
@@ -629,6 +694,15 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
 			     YMIN_NOMINAL, priv->y_max ?: YMAX_NOMINAL, 0, 0);
 	input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
 
+	if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) {
+		__set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
+		input_mt_init_slots(dev, 2);
+		input_set_abs_params(dev, ABS_MT_POSITION_X, XMIN_NOMINAL,
+				     priv->x_max ?: XMAX_NOMINAL, 0, 0);
+		input_set_abs_params(dev, ABS_MT_POSITION_Y, YMIN_NOMINAL,
+				     priv->y_max ?: YMAX_NOMINAL, 0, 0);
+	}
+
 	if (SYN_CAP_PALMDETECT(priv->capabilities))
 		input_set_abs_params(dev, ABS_TOOL_WIDTH, 0, 15, 0, 0);
 
@@ -663,6 +737,7 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
 	input_abs_set_res(dev, ABS_Y, priv->y_res);
 
 	if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
+		__set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
 		/* Clickpads report only left button */
 		__clear_bit(BTN_RIGHT, dev->keybit);
 		__clear_bit(BTN_MIDDLE, dev->keybit);
@@ -702,6 +777,11 @@ static int synaptics_reconnect(struct psmouse *psmouse)
 		return -1;
 	}
 
+	if (synaptics_set_advanced_gesture_mode(psmouse)) {
+		printk(KERN_ERR "Advanced gesture mode reconnect failed.\n");
+		return -1;
+	}
+
 	return 0;
 }
 
@@ -744,15 +824,45 @@ static const struct dmi_system_id __initconst toshiba_dmi_table[] = {
 #endif
 };
 
+static bool broken_olpc_ec;
+
+static const struct dmi_system_id __initconst olpc_dmi_table[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_OLPC)
+	{
+		/* OLPC XO-1 or XO-1.5 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "OLPC"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "XO"),
+		},
+	},
+	{ }
+#endif
+};
+
 void __init synaptics_module_init(void)
 {
 	impaired_toshiba_kbc = dmi_check_system(toshiba_dmi_table);
+	broken_olpc_ec = dmi_check_system(olpc_dmi_table);
 }
 
 int synaptics_init(struct psmouse *psmouse)
 {
 	struct synaptics_data *priv;
 
+	/*
+	 * The OLPC XO has issues with Synaptics' absolute mode; similarly to
+	 * the HGPK, it quickly degrades and the hardware becomes jumpy and
+	 * overly sensitive.  Not only that, but the constant packet spew
+	 * (even at a lowered 40pps rate) overloads the EC such that key
+	 * presses on the keyboard are missed.  Given all of that, don't
+	 * even attempt to use Synaptics mode.  Relative mode seems to work
+	 * just fine.
+	 */
+	if (broken_olpc_ec) {
+		printk(KERN_INFO "synaptics: OLPC XO detected, not enabling Synaptics protocol.\n");
+		return -ENODEV;
+	}
+
 	psmouse->private = priv = kzalloc(sizeof(struct synaptics_data), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
@@ -769,6 +879,11 @@ int synaptics_init(struct psmouse *psmouse)
 		goto init_fail;
 	}
 
+	if (synaptics_set_advanced_gesture_mode(psmouse)) {
+		printk(KERN_ERR "Advanced gesture mode init failed.\n");
+		goto init_fail;
+	}
+
 	priv->pkt_type = SYN_MODEL_NEWABS(priv->model_id) ? SYN_NEWABS : SYN_OLDABS;
 
 	printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx\n",
@@ -802,8 +917,8 @@ int synaptics_init(struct psmouse *psmouse)
 
 	/*
 	 * Toshiba's KBC seems to have trouble handling data from
-	 * Synaptics as full rate, switch to lower rate which is roughly
-	 * thye same as rate of standard PS/2 mouse.
+	 * Synaptics at full rate.  Switch to a lower rate (roughly
+	 * the same rate as a standard PS/2 mouse).
 	 */
 	if (psmouse->rate >= 80 && impaired_toshiba_kbc) {
 		printk(KERN_INFO "synaptics: Toshiba %s detected, limiting rate to 40pps.\n",
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index 0aefaa885871..25e5d042a72c 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -54,6 +54,7 @@
 #define SYN_CAP_CLICKPAD(ex0c)		((ex0c) & 0x100000) /* 1-button ClickPad */
 #define SYN_CAP_CLICKPAD2BTN(ex0c)	((ex0c) & 0x000100) /* 2-button ClickPad */
 #define SYN_CAP_MAX_DIMENSIONS(ex0c)	((ex0c) & 0x020000)
+#define SYN_CAP_ADV_GESTURE(ex0c)	((ex0c) & 0x080000)
 
 /* synaptics modes query bits */
 #define SYN_MODE_ABSOLUTE(m)		((m) & (1 << 7))
@@ -113,6 +114,8 @@ struct synaptics_data {
 	int scroll;
 
 	struct serio *pt_port;			/* Pass-through serio port */
+
+	struct synaptics_hw_state mt;		/* current gesture packet */
 };
 
 void synaptics_module_init(void);
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index 2a00ddf4f23a..7630273e9474 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -9,6 +9,8 @@
  * the Free Software Foundation.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #define MOUSEDEV_MINOR_BASE	32
 #define MOUSEDEV_MINORS		32
 #define MOUSEDEV_MIX		31
@@ -977,7 +979,7 @@ static int mousedev_connect(struct input_handler *handler,
 			break;
 
 	if (minor == MOUSEDEV_MINORS) {
-		printk(KERN_ERR "mousedev: no more free mousedev devices\n");
+		pr_err("no more free mousedev devices\n");
 		return -ENFILE;
 	}
 
@@ -1087,13 +1089,13 @@ static int __init mousedev_init(void)
 #ifdef CONFIG_INPUT_MOUSEDEV_PSAUX
 	error = misc_register(&psaux_mouse);
 	if (error)
-		printk(KERN_WARNING "mice: could not register psaux device, "
-			"error: %d\n", error);
+		pr_warning("could not register psaux device, error: %d\n",
+			   error);
 	else
 		psaux_registered = 1;
 #endif
 
-	printk(KERN_INFO "mice: PS/2 mouse device common for all mice\n");
+	pr_info("PS/2 mouse device common for all mice\n");
 
 	return 0;
 }
diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c
index 8f1770e1e08b..ebe955325677 100644
--- a/drivers/input/serio/ams_delta_serio.c
+++ b/drivers/input/serio/ams_delta_serio.c
@@ -172,6 +172,5 @@ static void __exit ams_delta_serio_exit(void)
 	free_irq(OMAP_GPIO_IRQ(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), 0);
 	gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_CLK);
 	gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_DATA);
-	kfree(ams_delta_serio);
 }
 module_exit(ams_delta_serio_exit);
diff --git a/drivers/input/serio/ct82c710.c b/drivers/input/serio/ct82c710.c
index 4a3084695c00..448c7724beb9 100644
--- a/drivers/input/serio/ct82c710.c
+++ b/drivers/input/serio/ct82c710.c
@@ -191,6 +191,9 @@ static int __devinit ct82c710_probe(struct platform_device *dev)
 
 	serio_register_port(ct82c710_port);
 
+	printk(KERN_INFO "serio: C&T 82c710 mouse port at %#llx irq %d\n",
+		(unsigned long long)CT82C710_DATA, CT82C710_IRQ);
+
 	return 0;
 }
 
@@ -237,11 +240,6 @@ static int __init ct82c710_init(void)
 	if (error)
 		goto err_free_device;
 
-	serio_register_port(ct82c710_port);
-
-	printk(KERN_INFO "serio: C&T 82c710 mouse port at %#llx irq %d\n",
-		(unsigned long long)CT82C710_DATA, CT82C710_IRQ);
-
 	return 0;
 
  err_free_device:
diff --git a/drivers/input/serio/hil_mlc.c b/drivers/input/serio/hil_mlc.c
index e5624d8f1709..bfd3865d886b 100644
--- a/drivers/input/serio/hil_mlc.c
+++ b/drivers/input/serio/hil_mlc.c
@@ -932,6 +932,11 @@ int hil_mlc_register(hil_mlc *mlc)
 		hil_mlc_copy_di_scratch(mlc, i);
 		mlc_serio = kzalloc(sizeof(*mlc_serio), GFP_KERNEL);
 		mlc->serio[i] = mlc_serio;
+		if (!mlc->serio[i]) {
+			for (; i >= 0; i--)
+				kfree(mlc->serio[i]);
+			return -ENOMEM;
+		}
 		snprintf(mlc_serio->name, sizeof(mlc_serio->name)-1, "HIL_SERIO%d", i);
 		snprintf(mlc_serio->phys, sizeof(mlc_serio->phys)-1, "HIL%d", i);
 		mlc_serio->id			= hil_mlc_serio_id;
diff --git a/drivers/input/serio/hp_sdc_mlc.c b/drivers/input/serio/hp_sdc_mlc.c
index 7d2b820ef58d..d50f0678bf47 100644
--- a/drivers/input/serio/hp_sdc_mlc.c
+++ b/drivers/input/serio/hp_sdc_mlc.c
@@ -305,6 +305,7 @@ static void hp_sdc_mlc_out(hil_mlc *mlc)
 static int __init hp_sdc_mlc_init(void)
 {
 	hil_mlc *mlc = &hp_sdc_mlc;
+	int err;
 
 #ifdef __mc68000__
 	if (!MACH_IS_HP300)
@@ -323,22 +324,21 @@ static int __init hp_sdc_mlc_init(void)
 	mlc->out = &hp_sdc_mlc_out;
 	mlc->priv = &hp_sdc_mlc_priv;
 
-	if (hil_mlc_register(mlc)) {
+	err = hil_mlc_register(mlc);
+	if (err) {
 		printk(KERN_WARNING PREFIX "Failed to register MLC structure with hil_mlc\n");
-		goto err0;
+		return err;
 	}
 
 	if (hp_sdc_request_hil_irq(&hp_sdc_mlc_isr)) {
 		printk(KERN_WARNING PREFIX "Request for raw HIL ISR hook denied\n");
-		goto err1;
+		if (hil_mlc_unregister(mlc))
+			printk(KERN_ERR PREFIX "Failed to unregister MLC structure with hil_mlc.\n"
+				"This is bad.  Could cause an oops.\n");
+		return -EBUSY;
 	}
+
 	return 0;
- err1:
-	if (hil_mlc_unregister(mlc))
-		printk(KERN_ERR PREFIX "Failed to unregister MLC structure with hil_mlc.\n"
-			"This is bad.  Could cause an oops.\n");
- err0:
-	return -EBUSY;
 }
 
 static void __exit hp_sdc_mlc_exit(void)
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index a5475b577086..5ae0fc4578fe 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -553,6 +553,13 @@ static const struct dmi_system_id __initconst i8042_dmi_laptop_table[] = {
  */
 static const struct dmi_system_id __initconst i8042_dmi_dritek_table[] = {
 	{
+		/* Acer Aspire 5100 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5100"),
+		},
+	},
+	{
 		/* Acer Aspire 5610 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
@@ -752,7 +759,7 @@ static int __init i8042_pnp_init(void)
 #endif
 
 	if (i8042_nopnp) {
-		printk(KERN_INFO "i8042: PNP detection disabled\n");
+		pr_info("PNP detection disabled\n");
 		return 0;
 	}
 
@@ -769,7 +776,7 @@ static int __init i8042_pnp_init(void)
 #if defined(__ia64__)
 		return -ENODEV;
 #else
-		printk(KERN_INFO "PNP: No PS/2 controller found. Probing ports directly.\n");
+		pr_info("PNP: No PS/2 controller found. Probing ports directly.\n");
 		return 0;
 #endif
 	}
@@ -781,7 +788,7 @@ static int __init i8042_pnp_init(void)
 		snprintf(aux_irq_str, sizeof(aux_irq_str),
 			"%d", i8042_pnp_aux_irq);
 
-	printk(KERN_INFO "PNP: PS/2 Controller [%s%s%s] at %#x,%#x irq %s%s%s\n",
+	pr_info("PNP: PS/2 Controller [%s%s%s] at %#x,%#x irq %s%s%s\n",
 		i8042_pnp_kbd_name, (i8042_pnp_kbd_devices && i8042_pnp_aux_devices) ? "," : "",
 		i8042_pnp_aux_name,
 		i8042_pnp_data_reg, i8042_pnp_command_reg,
@@ -798,9 +805,7 @@ static int __init i8042_pnp_init(void)
 	if (((i8042_pnp_data_reg & ~0xf) == (i8042_data_reg & ~0xf) &&
 	      i8042_pnp_data_reg != i8042_data_reg) ||
 	    !i8042_pnp_data_reg) {
-		printk(KERN_WARNING
-			"PNP: PS/2 controller has invalid data port %#x; "
-			"using default %#x\n",
+		pr_warn("PNP: PS/2 controller has invalid data port %#x; using default %#x\n",
 			i8042_pnp_data_reg, i8042_data_reg);
 		i8042_pnp_data_reg = i8042_data_reg;
 		pnp_data_busted = true;
@@ -809,33 +814,27 @@ static int __init i8042_pnp_init(void)
 	if (((i8042_pnp_command_reg & ~0xf) == (i8042_command_reg & ~0xf) &&
 	      i8042_pnp_command_reg != i8042_command_reg) ||
 	    !i8042_pnp_command_reg) {
-		printk(KERN_WARNING
-			"PNP: PS/2 controller has invalid command port %#x; "
-			"using default %#x\n",
+		pr_warn("PNP: PS/2 controller has invalid command port %#x; using default %#x\n",
 			i8042_pnp_command_reg, i8042_command_reg);
 		i8042_pnp_command_reg = i8042_command_reg;
 		pnp_data_busted = true;
 	}
 
 	if (!i8042_nokbd && !i8042_pnp_kbd_irq) {
-		printk(KERN_WARNING
-			"PNP: PS/2 controller doesn't have KBD irq; "
-			"using default %d\n", i8042_kbd_irq);
+		pr_warn("PNP: PS/2 controller doesn't have KBD irq; using default %d\n",
+			i8042_kbd_irq);
 		i8042_pnp_kbd_irq = i8042_kbd_irq;
 		pnp_data_busted = true;
 	}
 
 	if (!i8042_noaux && !i8042_pnp_aux_irq) {
 		if (!pnp_data_busted && i8042_pnp_kbd_irq) {
-			printk(KERN_WARNING
-				"PNP: PS/2 appears to have AUX port disabled, "
-				"if this is incorrect please boot with "
-				"i8042.nopnp\n");
+			pr_warn("PNP: PS/2 appears to have AUX port disabled, "
+				"if this is incorrect please boot with i8042.nopnp\n");
 			i8042_noaux = true;
 		} else {
-			printk(KERN_WARNING
-				"PNP: PS/2 controller doesn't have AUX irq; "
-				"using default %d\n", i8042_aux_irq);
+			pr_warn("PNP: PS/2 controller doesn't have AUX irq; using default %d\n",
+				i8042_aux_irq);
 			i8042_pnp_aux_irq = i8042_aux_irq;
 		}
 	}
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 18db5a8c7478..c04ff00a3663 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -10,6 +10,8 @@
  * the Free Software Foundation.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/types.h>
 #include <linux/delay.h>
 #include <linux/module.h>
@@ -225,8 +227,8 @@ static int i8042_flush(void)
 		udelay(50);
 		data = i8042_read_data();
 		i++;
-		dbg("%02x <- i8042 (flush, %s)", data,
-			str & I8042_STR_AUXDATA ? "aux" : "kbd");
+		dbg("%02x <- i8042 (flush, %s)\n",
+		    data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
 	}
 
 	spin_unlock_irqrestore(&i8042_lock, flags);
@@ -253,32 +255,32 @@ static int __i8042_command(unsigned char *param, int command)
 	if (error)
 		return error;
 
-	dbg("%02x -> i8042 (command)", command & 0xff);
+	dbg("%02x -> i8042 (command)\n", command & 0xff);
 	i8042_write_command(command & 0xff);
 
 	for (i = 0; i < ((command >> 12) & 0xf); i++) {
 		error = i8042_wait_write();
 		if (error)
 			return error;
-		dbg("%02x -> i8042 (parameter)", param[i]);
+		dbg("%02x -> i8042 (parameter)\n", param[i]);
 		i8042_write_data(param[i]);
 	}
 
 	for (i = 0; i < ((command >> 8) & 0xf); i++) {
 		error = i8042_wait_read();
 		if (error) {
-			dbg("     -- i8042 (timeout)");
+			dbg("     -- i8042 (timeout)\n");
 			return error;
 		}
 
 		if (command == I8042_CMD_AUX_LOOP &&
 		    !(i8042_read_status() & I8042_STR_AUXDATA)) {
-			dbg("     -- i8042 (auxerr)");
+			dbg("     -- i8042 (auxerr)\n");
 			return -1;
 		}
 
 		param[i] = i8042_read_data();
-		dbg("%02x <- i8042 (return)", param[i]);
+		dbg("%02x <- i8042 (return)\n", param[i]);
 	}
 
 	return 0;
@@ -309,7 +311,7 @@ static int i8042_kbd_write(struct serio *port, unsigned char c)
 	spin_lock_irqsave(&i8042_lock, flags);
 
 	if (!(retval = i8042_wait_write())) {
-		dbg("%02x -> i8042 (kbd-data)", c);
+		dbg("%02x -> i8042 (kbd-data)\n", c);
 		i8042_write_data(c);
 	}
 
@@ -355,17 +357,14 @@ static void i8042_port_close(struct serio *serio)
 
 	i8042_ctr &= ~irq_bit;
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
-		printk(KERN_WARNING
-			"i8042.c: Can't write CTR while closing %s port.\n",
-			port_name);
+		pr_warn("Can't write CTR while closing %s port\n", port_name);
 
 	udelay(50);
 
 	i8042_ctr &= ~disable_bit;
 	i8042_ctr |= irq_bit;
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
-		printk(KERN_ERR "i8042.c: Can't reactivate %s port.\n",
-			port_name);
+		pr_err("Can't reactivate %s port\n", port_name);
 
 	/*
 	 * See if there is any data appeared while we were messing with
@@ -456,7 +455,8 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
 	str = i8042_read_status();
 	if (unlikely(~str & I8042_STR_OBF)) {
 		spin_unlock_irqrestore(&i8042_lock, flags);
-		if (irq) dbg("Interrupt %d, without any data", irq);
+		if (irq)
+			dbg("Interrupt %d, without any data\n", irq);
 		ret = 0;
 		goto out;
 	}
@@ -469,7 +469,8 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
 
 		dfl = 0;
 		if (str & I8042_STR_MUXERR) {
-			dbg("MUX error, status is %02x, data is %02x", str, data);
+			dbg("MUX error, status is %02x, data is %02x\n",
+			    str, data);
 /*
  * When MUXERR condition is signalled the data register can only contain
  * 0xfd, 0xfe or 0xff if implementation follows the spec. Unfortunately
@@ -512,7 +513,7 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
 	port = &i8042_ports[port_no];
 	serio = port->exists ? port->serio : NULL;
 
-	dbg("%02x <- i8042 (interrupt, %d, %d%s%s)",
+	dbg("%02x <- i8042 (interrupt, %d, %d%s%s)\n",
 	    data, port_no, irq,
 	    dfl & SERIO_PARITY ? ", bad parity" : "",
 	    dfl & SERIO_TIMEOUT ? ", timeout" : "");
@@ -540,7 +541,7 @@ static int i8042_enable_kbd_port(void)
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
 		i8042_ctr &= ~I8042_CTR_KBDINT;
 		i8042_ctr |= I8042_CTR_KBDDIS;
-		printk(KERN_ERR "i8042.c: Failed to enable KBD port.\n");
+		pr_err("Failed to enable KBD port\n");
 		return -EIO;
 	}
 
@@ -559,7 +560,7 @@ static int i8042_enable_aux_port(void)
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
 		i8042_ctr &= ~I8042_CTR_AUXINT;
 		i8042_ctr |= I8042_CTR_AUXDIS;
-		printk(KERN_ERR "i8042.c: Failed to enable AUX port.\n");
+		pr_err("Failed to enable AUX port\n");
 		return -EIO;
 	}
 
@@ -641,7 +642,7 @@ static int __init i8042_check_mux(void)
 	if (i8042_set_mux_mode(true, &mux_version))
 		return -1;
 
-	printk(KERN_INFO "i8042.c: Detected active multiplexing controller, rev %d.%d.\n",
+	pr_info("Detected active multiplexing controller, rev %d.%d\n",
 		(mux_version >> 4) & 0xf, mux_version & 0xf);
 
 /*
@@ -651,7 +652,7 @@ static int __init i8042_check_mux(void)
 	i8042_ctr &= ~I8042_CTR_AUXINT;
 
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		printk(KERN_ERR "i8042.c: Failed to disable AUX port, can't use MUX.\n");
+		pr_err("Failed to disable AUX port, can't use MUX\n");
 		return -EIO;
 	}
 
@@ -676,8 +677,8 @@ static irqreturn_t __init i8042_aux_test_irq(int irq, void *dev_id)
 	str = i8042_read_status();
 	if (str & I8042_STR_OBF) {
 		data = i8042_read_data();
-		dbg("%02x <- i8042 (aux_test_irq, %s)",
-			data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
+		dbg("%02x <- i8042 (aux_test_irq, %s)\n",
+		    data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
 		if (i8042_irq_being_tested &&
 		    data == 0xa5 && (str & I8042_STR_AUXDATA))
 			complete(&i8042_aux_irq_delivered);
@@ -770,8 +771,8 @@ static int __init i8042_check_aux(void)
  */
 
 	if (i8042_toggle_aux(false)) {
-		printk(KERN_WARNING "Failed to disable AUX port, but continuing anyway... Is this a SiS?\n");
-		printk(KERN_WARNING "If AUX port is really absent please use the 'i8042.noaux' option.\n");
+		pr_warn("Failed to disable AUX port, but continuing anyway... Is this a SiS?\n");
+		pr_warn("If AUX port is really absent please use the 'i8042.noaux' option\n");
 	}
 
 	if (i8042_toggle_aux(true))
@@ -819,7 +820,7 @@ static int __init i8042_check_aux(void)
  * AUX IRQ was never delivered so we need to flush the controller to
  * get rid of the byte we put there; otherwise keyboard may not work.
  */
-		dbg("     -- i8042 (aux irq test timeout)");
+		dbg("     -- i8042 (aux irq test timeout)\n");
 		i8042_flush();
 		retval = -1;
 	}
@@ -845,7 +846,7 @@ static int __init i8042_check_aux(void)
 static int i8042_controller_check(void)
 {
 	if (i8042_flush() == I8042_BUFFER_SIZE) {
-		printk(KERN_ERR "i8042.c: No controller found.\n");
+		pr_err("No controller found\n");
 		return -ENODEV;
 	}
 
@@ -864,15 +865,15 @@ static int i8042_controller_selftest(void)
 	do {
 
 		if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
-			printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
+			pr_err("i8042 controller self test timeout\n");
 			return -ENODEV;
 		}
 
 		if (param == I8042_RET_CTL_TEST)
 			return 0;
 
-		printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
-			param, I8042_RET_CTL_TEST);
+		pr_err("i8042 controller selftest failed. (%#x != %#x)\n",
+		       param, I8042_RET_CTL_TEST);
 		msleep(50);
 	} while (i++ < 5);
 
@@ -883,8 +884,7 @@ static int i8042_controller_selftest(void)
 	 * and user will still get a working keyboard. This is especially
 	 * important on netbooks. On other arches we trust hardware more.
 	 */
-	printk(KERN_INFO
-		"i8042: giving up on controller selftest, continuing anyway...\n");
+	pr_info("giving up on controller selftest, continuing anyway...\n");
 	return 0;
 #else
 	return -EIO;
@@ -909,8 +909,7 @@ static int i8042_controller_init(void)
 
 	do {
 		if (n >= 10) {
-			printk(KERN_ERR
-				"i8042.c: Unable to get stable CTR read.\n");
+			pr_err("Unable to get stable CTR read\n");
 			return -EIO;
 		}
 
@@ -918,8 +917,7 @@ static int i8042_controller_init(void)
 			udelay(50);
 
 		if (i8042_command(&ctr[n++ % 2], I8042_CMD_CTL_RCTR)) {
-			printk(KERN_ERR
-				"i8042.c: Can't read CTR while initializing i8042.\n");
+			pr_err("Can't read CTR while initializing i8042\n");
 			return -EIO;
 		}
 
@@ -943,7 +941,7 @@ static int i8042_controller_init(void)
 		if (i8042_unlock)
 			i8042_ctr |= I8042_CTR_IGNKEYLOCK;
 		else
-			printk(KERN_WARNING "i8042.c: Warning: Keylock active.\n");
+			pr_warn("Warning: Keylock active\n");
 	}
 	spin_unlock_irqrestore(&i8042_lock, flags);
 
@@ -970,7 +968,7 @@ static int i8042_controller_init(void)
  */
 
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		printk(KERN_ERR "i8042.c: Can't write CTR while initializing i8042.\n");
+		pr_err("Can't write CTR while initializing i8042\n");
 		return -EIO;
 	}
 
@@ -1000,7 +998,7 @@ static void i8042_controller_reset(void)
 	i8042_ctr &= ~(I8042_CTR_KBDINT | I8042_CTR_AUXINT);
 
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
-		printk(KERN_WARNING "i8042.c: Can't write CTR while resetting.\n");
+		pr_warn("Can't write CTR while resetting\n");
 
 /*
  * Disable MUX mode if present.
@@ -1021,7 +1019,7 @@ static void i8042_controller_reset(void)
  */
 
 	if (i8042_command(&i8042_initial_ctr, I8042_CMD_CTL_WCTR))
-		printk(KERN_WARNING "i8042.c: Can't restore CTR.\n");
+		pr_warn("Can't restore CTR\n");
 }
 
 
@@ -1045,14 +1043,14 @@ static long i8042_panic_blink(int state)
 	led = (state) ? 0x01 | 0x04 : 0;
 	while (i8042_read_status() & I8042_STR_IBF)
 		DELAY;
-	dbg("%02x -> i8042 (panic blink)", 0xed);
+	dbg("%02x -> i8042 (panic blink)\n", 0xed);
 	i8042_suppress_kbd_ack = 2;
 	i8042_write_data(0xed); /* set leds */
 	DELAY;
 	while (i8042_read_status() & I8042_STR_IBF)
 		DELAY;
 	DELAY;
-	dbg("%02x -> i8042 (panic blink)", led);
+	dbg("%02x -> i8042 (panic blink)\n", led);
 	i8042_write_data(led);
 	DELAY;
 	return delay;
@@ -1068,9 +1066,7 @@ static void i8042_dritek_enable(void)
 
 	error = i8042_command(&param, 0x1059);
 	if (error)
-		printk(KERN_WARNING
-			"Failed to enable DRITEK extension: %d\n",
-			error);
+		pr_warn("Failed to enable DRITEK extension: %d\n", error);
 }
 #endif
 
@@ -1105,10 +1101,10 @@ static int i8042_controller_resume(bool force_reset)
 	i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS;
 	i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT);
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		printk(KERN_WARNING "i8042: Can't write CTR to resume, retrying...\n");
+		pr_warn("Can't write CTR to resume, retrying...\n");
 		msleep(50);
 		if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-			printk(KERN_ERR "i8042: CTR write retry failed\n");
+			pr_err("CTR write retry failed\n");
 			return -EIO;
 		}
 	}
@@ -1121,9 +1117,7 @@ static int i8042_controller_resume(bool force_reset)
 
 	if (i8042_mux_present) {
 		if (i8042_set_mux_mode(true, NULL) || i8042_enable_mux_ports())
-			printk(KERN_WARNING
-				"i8042: failed to resume active multiplexor, "
-				"mouse won't work.\n");
+			pr_warn("failed to resume active multiplexor, mouse won't work\n");
 	} else if (i8042_ports[I8042_AUX_PORT_NO].serio)
 		i8042_enable_aux_port();
 
diff --git a/drivers/input/serio/i8042.h b/drivers/input/serio/i8042.h
index cbc1beb66574..ac1d759d0f55 100644
--- a/drivers/input/serio/i8042.h
+++ b/drivers/input/serio/i8042.h
@@ -89,15 +89,19 @@
 #ifdef DEBUG
 static unsigned long i8042_start_time;
 #define dbg_init() do { i8042_start_time = jiffies; } while (0)
-#define dbg(format, arg...) 							\
-	do { 									\
+#define dbg(format, arg...)							\
+	do {									\
 		if (i8042_debug)						\
-			printk(KERN_DEBUG __FILE__ ": " format " [%d]\n" ,	\
-	 			## arg, (int) (jiffies - i8042_start_time));	\
+			printk(KERN_DEBUG KBUILD_MODNAME ": [%d] " format,	\
+			       (int) (jiffies - i8042_start_time), ##arg);	\
 	} while (0)
 #else
 #define dbg_init() do { } while (0)
-#define dbg(format, arg...) do {} while (0)
+#define dbg(format, arg...)							\
+	do {									\
+		if (0)								\
+			printk(KERN_DEBUG pr_fmt(format), ##arg);		\
+	} while (0)
 #endif
 
 #endif /* _I8042_H */
diff --git a/drivers/input/serio/ps2mult.c b/drivers/input/serio/ps2mult.c
index 6bce22e4e495..15aa81c9f1fb 100644
--- a/drivers/input/serio/ps2mult.c
+++ b/drivers/input/serio/ps2mult.c
@@ -207,7 +207,7 @@ static int ps2mult_connect(struct serio *serio, struct serio_driver *drv)
 err_out:
 	while (--i >= 0)
 		kfree(psm->ports[i].serio);
-	kfree(serio);
+	kfree(psm);
 	return error;
 }
 
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index 405bf214527c..db5b0bca1a1a 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -32,10 +32,9 @@
 #include <linux/module.h>
 #include <linux/serio.h>
 #include <linux/errno.h>
-#include <linux/wait.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/kthread.h>
+#include <linux/workqueue.h>
 #include <linux/mutex.h>
 
 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
@@ -44,7 +43,7 @@ MODULE_LICENSE("GPL");
 
 /*
  * serio_mutex protects entire serio subsystem and is taken every time
- * serio port or driver registrered or unregistered.
+ * serio port or driver registered or unregistered.
  */
 static DEFINE_MUTEX(serio_mutex);
 
@@ -165,58 +164,22 @@ struct serio_event {
 
 static DEFINE_SPINLOCK(serio_event_lock);	/* protects serio_event_list */
 static LIST_HEAD(serio_event_list);
-static DECLARE_WAIT_QUEUE_HEAD(serio_wait);
-static struct task_struct *serio_task;
 
-static int serio_queue_event(void *object, struct module *owner,
-			     enum serio_event_type event_type)
+static struct serio_event *serio_get_event(void)
 {
+	struct serio_event *event = NULL;
 	unsigned long flags;
-	struct serio_event *event;
-	int retval = 0;
 
 	spin_lock_irqsave(&serio_event_lock, flags);
 
-	/*
-	 * Scan event list for the other events for the same serio port,
-	 * starting with the most recent one. If event is the same we
-	 * do not need add new one. If event is of different type we
-	 * need to add this event and should not look further because
-	 * we need to preseve sequence of distinct events.
-	 */
-	list_for_each_entry_reverse(event, &serio_event_list, node) {
-		if (event->object == object) {
-			if (event->type == event_type)
-				goto out;
-			break;
-		}
-	}
-
-	event = kmalloc(sizeof(struct serio_event), GFP_ATOMIC);
-	if (!event) {
-		pr_err("Not enough memory to queue event %d\n", event_type);
-		retval = -ENOMEM;
-		goto out;
-	}
-
-	if (!try_module_get(owner)) {
-		pr_warning("Can't get module reference, dropping event %d\n",
-			   event_type);
-		kfree(event);
-		retval = -EINVAL;
-		goto out;
+	if (!list_empty(&serio_event_list)) {
+		event = list_first_entry(&serio_event_list,
+					 struct serio_event, node);
+		list_del_init(&event->node);
 	}
 
-	event->type = event_type;
-	event->object = object;
-	event->owner = owner;
-
-	list_add_tail(&event->node, &serio_event_list);
-	wake_up(&serio_wait);
-
-out:
 	spin_unlock_irqrestore(&serio_event_lock, flags);
-	return retval;
+	return event;
 }
 
 static void serio_free_event(struct serio_event *event)
@@ -250,25 +213,7 @@ static void serio_remove_duplicate_events(struct serio_event *event)
 	spin_unlock_irqrestore(&serio_event_lock, flags);
 }
 
-
-static struct serio_event *serio_get_event(void)
-{
-	struct serio_event *event = NULL;
-	unsigned long flags;
-
-	spin_lock_irqsave(&serio_event_lock, flags);
-
-	if (!list_empty(&serio_event_list)) {
-		event = list_first_entry(&serio_event_list,
-					 struct serio_event, node);
-		list_del_init(&event->node);
-	}
-
-	spin_unlock_irqrestore(&serio_event_lock, flags);
-	return event;
-}
-
-static void serio_handle_event(void)
+static void serio_handle_event(struct work_struct *work)
 {
 	struct serio_event *event;
 
@@ -307,6 +252,59 @@ static void serio_handle_event(void)
 	mutex_unlock(&serio_mutex);
 }
 
+static DECLARE_WORK(serio_event_work, serio_handle_event);
+
+static int serio_queue_event(void *object, struct module *owner,
+			     enum serio_event_type event_type)
+{
+	unsigned long flags;
+	struct serio_event *event;
+	int retval = 0;
+
+	spin_lock_irqsave(&serio_event_lock, flags);
+
+	/*
+	 * Scan event list for the other events for the same serio port,
+	 * starting with the most recent one. If event is the same we
+	 * do not need add new one. If event is of different type we
+	 * need to add this event and should not look further because
+	 * we need to preseve sequence of distinct events.
+	 */
+	list_for_each_entry_reverse(event, &serio_event_list, node) {
+		if (event->object == object) {
+			if (event->type == event_type)
+				goto out;
+			break;
+		}
+	}
+
+	event = kmalloc(sizeof(struct serio_event), GFP_ATOMIC);
+	if (!event) {
+		pr_err("Not enough memory to queue event %d\n", event_type);
+		retval = -ENOMEM;
+		goto out;
+	}
+
+	if (!try_module_get(owner)) {
+		pr_warning("Can't get module reference, dropping event %d\n",
+			   event_type);
+		kfree(event);
+		retval = -EINVAL;
+		goto out;
+	}
+
+	event->type = event_type;
+	event->object = object;
+	event->owner = owner;
+
+	list_add_tail(&event->node, &serio_event_list);
+	schedule_work(&serio_event_work);
+
+out:
+	spin_unlock_irqrestore(&serio_event_lock, flags);
+	return retval;
+}
+
 /*
  * Remove all events that have been submitted for a given
  * object, be it serio port or driver.
@@ -356,18 +354,6 @@ static struct serio *serio_get_pending_child(struct serio *parent)
 	return child;
 }
 
-static int serio_thread(void *nothing)
-{
-	do {
-		serio_handle_event();
-		wait_event_interruptible(serio_wait,
-			kthread_should_stop() || !list_empty(&serio_event_list));
-	} while (!kthread_should_stop());
-
-	return 0;
-}
-
-
 /*
  * Serio port operations
  */
@@ -1040,21 +1026,18 @@ static int __init serio_init(void)
 		return error;
 	}
 
-	serio_task = kthread_run(serio_thread, NULL, "kseriod");
-	if (IS_ERR(serio_task)) {
-		bus_unregister(&serio_bus);
-		error = PTR_ERR(serio_task);
-		pr_err("Failed to start kseriod, error: %d\n", error);
-		return error;
-	}
-
 	return 0;
 }
 
 static void __exit serio_exit(void)
 {
 	bus_unregister(&serio_bus);
-	kthread_stop(serio_task);
+
+	/*
+	 * There should not be any outstanding events but work may
+	 * still be scheduled so simply cancel it.
+	 */
+	cancel_work_sync(&serio_event_work);
 }
 
 subsys_initcall(serio_init);
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index f72df2c4a649..518782999fea 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -14,6 +14,7 @@
 
 #include "wacom_wac.h"
 #include "wacom.h"
+#include <linux/input/mt.h>
 
 static int wacom_penpartner_irq(struct wacom_wac *wacom)
 {
@@ -862,19 +863,21 @@ static int wacom_bpt_touch(struct wacom_wac *wacom)
 	struct wacom_features *features = &wacom->features;
 	struct input_dev *input = wacom->input;
 	unsigned char *data = wacom->data;
-	int sp = 0, sx = 0, sy = 0, count = 0;
 	int i;
 
 	for (i = 0; i < 2; i++) {
 		int p = data[9 * i + 2];
+		bool touch = p && !wacom->shared->stylus_in_proximity;
+
 		input_mt_slot(input, i);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
 		/*
 		 * Touch events need to be disabled while stylus is
 		 * in proximity because user's hand is resting on touchpad
 		 * and sending unwanted events.  User expects tablet buttons
 		 * to continue working though.
 		 */
-		if (p && !wacom->shared->stylus_in_proximity) {
+		if (touch) {
 			int x = get_unaligned_be16(&data[9 * i + 3]) & 0x7ff;
 			int y = get_unaligned_be16(&data[9 * i + 5]) & 0x7ff;
 			if (features->quirks & WACOM_QUIRK_BBTOUCH_LOWRES) {
@@ -884,23 +887,10 @@ static int wacom_bpt_touch(struct wacom_wac *wacom)
 			input_report_abs(input, ABS_MT_PRESSURE, p);
 			input_report_abs(input, ABS_MT_POSITION_X, x);
 			input_report_abs(input, ABS_MT_POSITION_Y, y);
-			if (wacom->id[i] < 0)
-				wacom->id[i] = wacom->trk_id++ & MAX_TRACKING_ID;
-			if (!count++)
-				sp = p, sx = x, sy = y;
-		} else {
-			wacom->id[i] = -1;
 		}
-		input_report_abs(input, ABS_MT_TRACKING_ID, wacom->id[i]);
 	}
 
-	input_report_key(input, BTN_TOUCH, count > 0);
-	input_report_key(input, BTN_TOOL_FINGER, count == 1);
-	input_report_key(input, BTN_TOOL_DOUBLETAP, count == 2);
-
-	input_report_abs(input, ABS_PRESSURE, sp);
-	input_report_abs(input, ABS_X, sx);
-	input_report_abs(input, ABS_Y, sy);
+	input_mt_report_pointer_emulation(input, true);
 
 	input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
 	input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0);
@@ -1272,7 +1262,7 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 			__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
 			__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
 
-			input_mt_create_slots(input_dev, 2);
+			input_mt_init_slots(input_dev, 2);
 			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
 					     0, features->x_max,
 					     features->x_fuzz, 0);
@@ -1282,8 +1272,6 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 			input_set_abs_params(input_dev, ABS_MT_PRESSURE,
 					     0, features->pressure_max,
 					     features->pressure_fuzz, 0);
-			input_set_abs_params(input_dev, ABS_MT_TRACKING_ID, 0,
-					     MAX_TRACKING_ID, 0, 0);
 		} else if (features->device_type == BTN_TOOL_PEN) {
 			__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
 			__set_bit(BTN_TOOL_PEN, input_dev->keybit);
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 00ca01541d89..b1310ec9720c 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -42,9 +42,6 @@
 #define WACOM_QUIRK_MULTI_INPUT		0x0001
 #define WACOM_QUIRK_BBTOUCH_LOWRES	0x0002
 
-/* largest reported tracking id */
-#define MAX_TRACKING_ID			0xfff
-
 enum {
 	PENPARTNER = 0,
 	GRAPHIRE,
@@ -100,7 +97,6 @@ struct wacom_wac {
 	int id[3];
 	__u32 serial[2];
 	int last_finger;
-	int trk_id;
 	struct wacom_features features;
 	struct wacom_shared *shared;
 	struct input_dev *input;
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 06ea8da95c62..07ac77d393a4 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -659,17 +659,17 @@ config TOUCHSCREEN_PCAP
 	  To compile this driver as a module, choose M here: the
 	  module will be called pcap_ts.
 
-config TOUCHSCREEN_TPS6507X
-	tristate "TPS6507x based touchscreens"
+config TOUCHSCREEN_ST1232
+	tristate "Sitronix ST1232 touchscreen controllers"
 	depends on I2C
 	help
-	  Say Y here if you have a TPS6507x based touchscreen
-	  controller.
+	  Say Y here if you want to support Sitronix ST1232
+	  touchscreen controller.
 
 	  If unsure, say N.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called tps6507x_ts.
+	  module will be called st1232_ts.
 
 config TOUCHSCREEN_STMPE
 	tristate "STMicroelectronics STMPE touchscreens"
@@ -681,4 +681,16 @@ config TOUCHSCREEN_STMPE
 	  To compile this driver as a module, choose M here: the
 	  module will be called stmpe-ts.
 
+config TOUCHSCREEN_TPS6507X
+	tristate "TPS6507x based touchscreens"
+	depends on I2C
+	help
+	  Say Y here if you have a TPS6507x based touchscreen
+	  controller.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tps6507x_ts.
+
 endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 7cc1b4f4b677..718bcc814952 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_TOUCHSCREEN_PCAP)		+= pcap_ts.o
 obj-$(CONFIG_TOUCHSCREEN_PENMOUNT)	+= penmount.o
 obj-$(CONFIG_TOUCHSCREEN_QT602240)	+= qt602240_ts.o
 obj-$(CONFIG_TOUCHSCREEN_S3C2410)	+= s3c2410_ts.o
+obj-$(CONFIG_TOUCHSCREEN_ST1232)	+= st1232.o
 obj-$(CONFIG_TOUCHSCREEN_STMPE)		+= stmpe-ts.o
 obj-$(CONFIG_TOUCHSCREEN_TNETV107X)	+= tnetv107x-ts.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213)	+= touchit213.o
diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c
index 2ca9e5d66460..f7fa9ef4cd65 100644
--- a/drivers/input/touchscreen/bu21013_ts.c
+++ b/drivers/input/touchscreen/bu21013_ts.c
@@ -365,7 +365,7 @@ static int bu21013_init_chip(struct bu21013_ts_data *data)
 	}
 
 	retval = i2c_smbus_write_byte_data(i2c, BU21013_TH_OFF_REG,
-				BU21013_TH_OFF_4 || BU21013_TH_OFF_3);
+				BU21013_TH_OFF_4 | BU21013_TH_OFF_3);
 	if (retval < 0) {
 		dev_err(&i2c->dev, "BU21013_TH_OFF reg write failed\n");
 		return retval;
diff --git a/drivers/input/touchscreen/qt602240_ts.c b/drivers/input/touchscreen/qt602240_ts.c
index 66b26ad3032a..4dcb0e872f6a 100644
--- a/drivers/input/touchscreen/qt602240_ts.c
+++ b/drivers/input/touchscreen/qt602240_ts.c
@@ -969,7 +969,7 @@ static int qt602240_initialize(struct qt602240_data *data)
 		return error;
 
 	data->object_table = kcalloc(info->object_num,
-				     sizeof(struct qt602240_data),
+				     sizeof(struct qt602240_object),
 				     GFP_KERNEL);
 	if (!data->object_table) {
 		dev_err(&client->dev, "Failed to allocate memory\n");
@@ -1324,8 +1324,9 @@ static int __devexit qt602240_remove(struct i2c_client *client)
 }
 
 #ifdef CONFIG_PM
-static int qt602240_suspend(struct i2c_client *client, pm_message_t mesg)
+static int qt602240_suspend(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct qt602240_data *data = i2c_get_clientdata(client);
 	struct input_dev *input_dev = data->input_dev;
 
@@ -1339,8 +1340,9 @@ static int qt602240_suspend(struct i2c_client *client, pm_message_t mesg)
 	return 0;
 }
 
-static int qt602240_resume(struct i2c_client *client)
+static int qt602240_resume(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct qt602240_data *data = i2c_get_clientdata(client);
 	struct input_dev *input_dev = data->input_dev;
 
@@ -1359,9 +1361,11 @@ static int qt602240_resume(struct i2c_client *client)
 
 	return 0;
 }
-#else
-#define qt602240_suspend	NULL
-#define qt602240_resume		NULL
+
+static const struct dev_pm_ops qt602240_pm_ops = {
+	.suspend	= qt602240_suspend,
+	.resume		= qt602240_resume,
+};
 #endif
 
 static const struct i2c_device_id qt602240_id[] = {
@@ -1374,11 +1378,12 @@ static struct i2c_driver qt602240_driver = {
 	.driver = {
 		.name	= "qt602240_ts",
 		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &qt602240_pm_ops,
+#endif
 	},
 	.probe		= qt602240_probe,
 	.remove		= __devexit_p(qt602240_remove),
-	.suspend	= qt602240_suspend,
-	.resume		= qt602240_resume,
 	.id_table	= qt602240_id,
 };
 
diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
new file mode 100644
index 000000000000..4ab371358b33
--- /dev/null
+++ b/drivers/input/touchscreen/st1232.c
@@ -0,0 +1,274 @@
+/*
+ * ST1232 Touchscreen Controller Driver
+ *
+ * Copyright (C) 2010 Renesas Solutions Corp.
+ *	Tony SIM <chinyeow.sim.xt@renesas.com>
+ *
+ * Using code from:
+ *  - android.git.kernel.org: projects/kernel/common.git: synaptics_i2c_rmi.c
+ *	Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#define ST1232_TS_NAME	"st1232-ts"
+
+#define MIN_X		0x00
+#define MIN_Y		0x00
+#define MAX_X		0x31f	/* (800 - 1) */
+#define MAX_Y		0x1df	/* (480 - 1) */
+#define MAX_AREA	0xff
+#define MAX_FINGERS	2
+
+struct st1232_ts_finger {
+	u16 x;
+	u16 y;
+	u8 t;
+	bool is_valid;
+};
+
+struct st1232_ts_data {
+	struct i2c_client *client;
+	struct input_dev *input_dev;
+	struct st1232_ts_finger finger[MAX_FINGERS];
+};
+
+static int st1232_ts_read_data(struct st1232_ts_data *ts)
+{
+	struct st1232_ts_finger *finger = ts->finger;
+	struct i2c_client *client = ts->client;
+	struct i2c_msg msg[2];
+	int error;
+	u8 start_reg;
+	u8 buf[10];
+
+	/* read touchscreen data from ST1232 */
+	msg[0].addr = client->addr;
+	msg[0].flags = 0;
+	msg[0].len = 1;
+	msg[0].buf = &start_reg;
+	start_reg = 0x10;
+
+	msg[1].addr = ts->client->addr;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len = sizeof(buf);
+	msg[1].buf = buf;
+
+	error = i2c_transfer(client->adapter, msg, 2);
+	if (error < 0)
+		return error;
+
+	/* get "valid" bits */
+	finger[0].is_valid = buf[2] >> 7;
+	finger[1].is_valid = buf[5] >> 7;
+
+	/* get xy coordinate */
+	if (finger[0].is_valid) {
+		finger[0].x = ((buf[2] & 0x0070) << 4) | buf[3];
+		finger[0].y = ((buf[2] & 0x0007) << 8) | buf[4];
+		finger[0].t = buf[8];
+	}
+
+	if (finger[1].is_valid) {
+		finger[1].x = ((buf[5] & 0x0070) << 4) | buf[6];
+		finger[1].y = ((buf[5] & 0x0007) << 8) | buf[7];
+		finger[1].t = buf[9];
+	}
+
+	return 0;
+}
+
+static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id)
+{
+	struct st1232_ts_data *ts = dev_id;
+	struct st1232_ts_finger *finger = ts->finger;
+	struct input_dev *input_dev = ts->input_dev;
+	int count = 0;
+	int i, ret;
+
+	ret = st1232_ts_read_data(ts);
+	if (ret < 0)
+		goto end;
+
+	/* multi touch protocol */
+	for (i = 0; i < MAX_FINGERS; i++) {
+		if (!finger[i].is_valid)
+			continue;
+
+		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, finger[i].t);
+		input_report_abs(input_dev, ABS_MT_POSITION_X, finger[i].x);
+		input_report_abs(input_dev, ABS_MT_POSITION_Y, finger[i].y);
+		input_mt_sync(input_dev);
+		count++;
+	}
+
+	/* SYN_MT_REPORT only if no contact */
+	if (!count)
+		input_mt_sync(input_dev);
+
+	/* SYN_REPORT */
+	input_sync(input_dev);
+
+end:
+	return IRQ_HANDLED;
+}
+
+static int __devinit st1232_ts_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	struct st1232_ts_data *ts;
+	struct input_dev *input_dev;
+	int error;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "need I2C_FUNC_I2C\n");
+		return -EIO;
+	}
+
+	if (!client->irq) {
+		dev_err(&client->dev, "no IRQ?\n");
+		return -EINVAL;
+	}
+
+
+	ts = kzalloc(sizeof(struct st1232_ts_data), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!ts || !input_dev) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	ts->client = client;
+	ts->input_dev = input_dev;
+
+	input_dev->name = "st1232-touchscreen";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = &client->dev;
+
+	__set_bit(EV_SYN, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(EV_ABS, input_dev->evbit);
+
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_X, MIN_X, MAX_X, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_Y, MIN_Y, MAX_Y, 0, 0);
+
+	error = request_threaded_irq(client->irq, NULL, st1232_ts_irq_handler,
+				     IRQF_ONESHOT, client->name, ts);
+	if (error) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		goto err_free_mem;
+	}
+
+	error = input_register_device(ts->input_dev);
+	if (error) {
+		dev_err(&client->dev, "Unable to register %s input device\n",
+			input_dev->name);
+		goto err_free_irq;
+	}
+
+	i2c_set_clientdata(client, ts);
+	device_init_wakeup(&client->dev, 1);
+
+	return 0;
+
+err_free_irq:
+	free_irq(client->irq, ts);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(ts);
+	return error;
+}
+
+static int __devexit st1232_ts_remove(struct i2c_client *client)
+{
+	struct st1232_ts_data *ts = i2c_get_clientdata(client);
+
+	device_init_wakeup(&client->dev, 0);
+	free_irq(client->irq, ts);
+	input_unregister_device(ts->input_dev);
+	kfree(ts);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int st1232_ts_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (device_may_wakeup(&client->dev))
+		enable_irq_wake(client->irq);
+	else
+		disable_irq(client->irq);
+
+	return 0;
+}
+
+static int st1232_ts_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (device_may_wakeup(&client->dev))
+		disable_irq_wake(client->irq);
+	else
+		enable_irq(client->irq);
+
+	return 0;
+}
+
+static const struct dev_pm_ops st1232_ts_pm_ops = {
+	.suspend	= st1232_ts_suspend,
+	.resume		= st1232_ts_resume,
+};
+#endif
+
+static const struct i2c_device_id st1232_ts_id[] = {
+	{ ST1232_TS_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, st1232_ts_id);
+
+static struct i2c_driver st1232_ts_driver = {
+	.probe		= st1232_ts_probe,
+	.remove		= __devexit_p(st1232_ts_remove),
+	.id_table	= st1232_ts_id,
+	.driver = {
+		.name	= ST1232_TS_NAME,
+		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &st1232_ts_pm_ops,
+#endif
+	},
+};
+
+static int __init st1232_ts_init(void)
+{
+	return i2c_add_driver(&st1232_ts_driver);
+}
+module_init(st1232_ts_init);
+
+static void __exit st1232_ts_exit(void)
+{
+	i2c_del_driver(&st1232_ts_driver);
+}
+module_exit(st1232_ts_exit);
+
+MODULE_AUTHOR("Tony SIM <chinyeow.sim.xt@renesas.com>");
+MODULE_DESCRIPTION("SITRONIX ST1232 Touchscreen Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c
index 9ae4c7b16ba7..8ed53aded2d3 100644
--- a/drivers/input/touchscreen/wacom_w8001.c
+++ b/drivers/input/touchscreen/wacom_w8001.c
@@ -15,10 +15,11 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <linux/input.h>
+#include <linux/input/mt.h>
 #include <linux/serio.h>
 #include <linux/init.h>
 #include <linux/ctype.h>
+#include <linux/delay.h>
 
 #define DRIVER_DESC	"Wacom W8001 serial touchscreen driver"
 
@@ -37,6 +38,7 @@ MODULE_LICENSE("GPL");
 
 #define W8001_QUERY_PACKET	0x20
 
+#define W8001_CMD_STOP		'0'
 #define W8001_CMD_START		'1'
 #define W8001_CMD_QUERY		'*'
 #define W8001_CMD_TOUCHQUERY	'%'
@@ -48,8 +50,6 @@ MODULE_LICENSE("GPL");
 #define W8001_PKTLEN_TPCCTL	11	/* control packet */
 #define W8001_PKTLEN_TOUCH2FG	13
 
-#define MAX_TRACKING_ID		0xFF	/* arbitrarily chosen */
-
 struct w8001_coord {
 	u8 rdy;
 	u8 tsw;
@@ -87,7 +87,6 @@ struct w8001 {
 	char phys[32];
 	int type;
 	unsigned int pktlen;
-	int trkid[2];
 };
 
 static void parse_data(u8 *data, struct w8001_coord *coord)
@@ -116,28 +115,23 @@ static void parse_data(u8 *data, struct w8001_coord *coord)
 
 static void parse_touch(struct w8001 *w8001)
 {
-	static int trkid;
 	struct input_dev *dev = w8001->dev;
 	unsigned char *data = w8001->data;
 	int i;
 
 	for (i = 0; i < 2; i++) {
-		input_mt_slot(dev, i);
+		bool touch = data[0] & (1 << i);
 
-		if (data[0] & (1 << i)) {
+		input_mt_slot(dev, i);
+		input_mt_report_slot_state(dev, MT_TOOL_FINGER, touch);
+		if (touch) {
 			int x = (data[6 * i + 1] << 7) | (data[6 * i + 2]);
 			int y = (data[6 * i + 3] << 7) | (data[6 * i + 4]);
 			/* data[5,6] and [11,12] is finger capacity */
 
 			input_report_abs(dev, ABS_MT_POSITION_X, x);
 			input_report_abs(dev, ABS_MT_POSITION_Y, y);
-			input_report_abs(dev, ABS_MT_TOOL_TYPE, MT_TOOL_FINGER);
-			if (w8001->trkid[i] < 0)
-				w8001->trkid[i] = trkid++ & MAX_TRACKING_ID;
-		} else {
-			w8001->trkid[i] = -1;
 		}
-		input_report_abs(dev, ABS_MT_TRACKING_ID, w8001->trkid[i]);
 	}
 
 	input_sync(dev);
@@ -287,24 +281,46 @@ static int w8001_setup(struct w8001 *w8001)
 	struct w8001_coord coord;
 	int error;
 
-	error = w8001_command(w8001, W8001_CMD_QUERY, true);
+	error = w8001_command(w8001, W8001_CMD_STOP, false);
 	if (error)
 		return error;
 
-	parse_data(w8001->response, &coord);
+	msleep(250);	/* wait 250ms before querying the device */
 
-	input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
-	input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
-	input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0);
-	input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
-	input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0);
+	/* penabled? */
+	error = w8001_command(w8001, W8001_CMD_QUERY, true);
+	if (!error) {
+		__set_bit(BTN_TOOL_PEN, dev->keybit);
+		__set_bit(BTN_TOOL_RUBBER, dev->keybit);
+		__set_bit(BTN_STYLUS, dev->keybit);
+		__set_bit(BTN_STYLUS2, dev->keybit);
+		parse_data(w8001->response, &coord);
+
+		input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
+		input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
+		input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0);
+		if (coord.tilt_x && coord.tilt_y) {
+			input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
+			input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0);
+		}
+	}
 
+	/* Touch enabled? */
 	error = w8001_command(w8001, W8001_CMD_TOUCHQUERY, true);
-	if (!error) {
+
+	/*
+	 * Some non-touch devices may reply to the touch query. But their
+	 * second byte is empty, which indicates touch is not supported.
+	 */
+	if (!error && w8001->response[1]) {
 		struct w8001_touch_query touch;
 
 		parse_touchquery(w8001->response, &touch);
 
+		input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0);
+		input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0);
+		__set_bit(BTN_TOOL_FINGER, dev->keybit);
+
 		switch (touch.sensor_id) {
 		case 0:
 		case 2:
@@ -318,15 +334,13 @@ static int w8001_setup(struct w8001 *w8001)
 		case 5:
 			w8001->pktlen = W8001_PKTLEN_TOUCH2FG;
 
-			input_mt_create_slots(dev, 2);
-			input_set_abs_params(dev, ABS_MT_TRACKING_ID,
-						0, MAX_TRACKING_ID, 0, 0);
+			input_mt_init_slots(dev, 2);
 			input_set_abs_params(dev, ABS_MT_POSITION_X,
 						0, touch.x, 0, 0);
 			input_set_abs_params(dev, ABS_MT_POSITION_Y,
 						0, touch.y, 0, 0);
 			input_set_abs_params(dev, ABS_MT_TOOL_TYPE,
-						0, 0, 0, 0);
+						0, MT_TOOL_MAX, 0, 0);
 			break;
 		}
 	}
@@ -372,7 +386,6 @@ static int w8001_connect(struct serio *serio, struct serio_driver *drv)
 	w8001->serio = serio;
 	w8001->id = serio->id.id;
 	w8001->dev = input_dev;
-	w8001->trkid[0] = w8001->trkid[1] = -1;
 	init_completion(&w8001->cmd_done);
 	snprintf(w8001->phys, sizeof(w8001->phys), "%s/input0", serio->phys);
 
@@ -385,11 +398,7 @@ static int w8001_connect(struct serio *serio, struct serio_driver *drv)
 	input_dev->dev.parent = &serio->dev;
 
 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
-	input_dev->keybit[BIT_WORD(BTN_TOOL_PEN)] |= BIT_MASK(BTN_TOOL_PEN);
-	input_dev->keybit[BIT_WORD(BTN_TOOL_RUBBER)] |= BIT_MASK(BTN_TOOL_RUBBER);
-	input_dev->keybit[BIT_WORD(BTN_STYLUS)] |= BIT_MASK(BTN_STYLUS);
-	input_dev->keybit[BIT_WORD(BTN_STYLUS2)] |= BIT_MASK(BTN_STYLUS2);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
 
 	serio_set_drvdata(serio, w8001);
 	err = serio_open(serio, drv);
diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/xen-kbdfront.c
index e0c024db2ca5..7f85a862ad11 100644
--- a/drivers/input/xen-kbdfront.c
+++ b/drivers/input/xen-kbdfront.c
@@ -17,6 +17,8 @@
  * Switch to grant tables together with xen-fbfront.c.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/module.h>
@@ -84,9 +86,8 @@ static irqreturn_t input_handler(int rq, void *dev_id)
 				input_report_key(dev, event->key.keycode,
 						 event->key.pressed);
 			else
-				printk(KERN_WARNING
-				       "xenkbd: unhandled keycode 0x%x\n",
-				       event->key.keycode);
+				pr_warning("unhandled keycode 0x%x\n",
+					   event->key.keycode);
 			break;
 		case XENKBD_TYPE_POS:
 			input_report_abs(dev, ABS_X, event->pos.abs_x);
@@ -292,8 +293,7 @@ InitWait:
 			ret = xenbus_printf(XBT_NIL, info->xbdev->nodename,
 					    "request-abs-pointer", "1");
 			if (ret)
-				printk(KERN_WARNING
-				       "xenkbd: can't request abs-pointer");
+				pr_warning("can't request abs-pointer\n");
 		}
 		xenbus_switch_state(dev, XenbusStateConnected);
 		break;
diff --git a/drivers/macintosh/mac_hid.c b/drivers/macintosh/mac_hid.c
index 067f9962f499..6a82388505f0 100644
--- a/drivers/macintosh/mac_hid.c
+++ b/drivers/macintosh/mac_hid.c
@@ -23,6 +23,8 @@ static int mouse_button3_keycode = KEY_RIGHTALT;	/* right option key */
 
 static struct input_dev *mac_hid_emumouse_dev;
 
+static DEFINE_MUTEX(mac_hid_emumouse_mutex);
+
 static int mac_hid_create_emumouse(void)
 {
 	static struct lock_class_key mac_hid_emumouse_dev_event_class;
@@ -187,6 +189,10 @@ static int mac_hid_toggle_emumouse(ctl_table *table, int write,
 	int old_val = *valp;
 	int rc;
 
+	rc = mutex_lock_killable(&mac_hid_emumouse_mutex);
+	if (rc)
+		return rc;
+
 	rc = proc_dointvec(table, write, buffer, lenp, ppos);
 
 	if (rc == 0 && write && *valp != old_val) {
@@ -202,6 +208,8 @@ static int mac_hid_toggle_emumouse(ctl_table *table, int write,
 	if (rc)
 		*valp = old_val;
 
+	mutex_unlock(&mac_hid_emumouse_mutex);
+
 	return rc;
 }
 
diff --git a/include/linux/input.h b/include/linux/input.h
index 9777668883be..84d4ce0d983a 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -112,6 +112,7 @@ struct input_keymap_entry {
 #define EVIOCGNAME(len)		_IOC(_IOC_READ, 'E', 0x06, len)		/* get device name */
 #define EVIOCGPHYS(len)		_IOC(_IOC_READ, 'E', 0x07, len)		/* get physical location */
 #define EVIOCGUNIQ(len)		_IOC(_IOC_READ, 'E', 0x08, len)		/* get unique identifier */
+#define EVIOCGPROP(len)		_IOC(_IOC_READ, 'E', 0x09, len)		/* get device properties */
 
 #define EVIOCGKEY(len)		_IOC(_IOC_READ, 'E', 0x18, len)		/* get global key state */
 #define EVIOCGLED(len)		_IOC(_IOC_READ, 'E', 0x19, len)		/* get all LEDs */
@@ -129,6 +130,18 @@ struct input_keymap_entry {
 #define EVIOCGRAB		_IOW('E', 0x90, int)			/* Grab/Release device */
 
 /*
+ * Device properties and quirks
+ */
+
+#define INPUT_PROP_POINTER		0x00	/* needs a pointer */
+#define INPUT_PROP_DIRECT		0x01	/* direct input devices */
+#define INPUT_PROP_BUTTONPAD		0x02	/* has button(s) under pad */
+#define INPUT_PROP_SEMI_MT		0x03	/* touch rectangle only */
+
+#define INPUT_PROP_MAX			0x1f
+#define INPUT_PROP_CNT			(INPUT_PROP_MAX + 1)
+
+/*
  * Event types
  */
 
@@ -758,11 +771,12 @@ struct input_keymap_entry {
 #define ABS_MT_BLOB_ID		0x38	/* Group a set of packets as a blob */
 #define ABS_MT_TRACKING_ID	0x39	/* Unique ID of initiated contact */
 #define ABS_MT_PRESSURE		0x3a	/* Pressure on contact area */
+#define ABS_MT_DISTANCE		0x3b	/* Contact hover distance */
 
 #ifdef __KERNEL__
 /* Implementation details, userspace should not care about these */
 #define ABS_MT_FIRST		ABS_MT_TOUCH_MAJOR
-#define ABS_MT_LAST		ABS_MT_PRESSURE
+#define ABS_MT_LAST		ABS_MT_DISTANCE
 #endif
 
 #define ABS_MAX			0x3f
@@ -873,6 +887,7 @@ struct input_keymap_entry {
  */
 #define MT_TOOL_FINGER		0
 #define MT_TOOL_PEN		1
+#define MT_TOOL_MAX		1
 
 /*
  * Values describing the status of a force-feedback effect
@@ -1108,19 +1123,12 @@ struct ff_effect {
 #include <linux/mod_devicetable.h>
 
 /**
- * struct input_mt_slot - represents the state of an input MT slot
- * @abs: holds current values of ABS_MT axes for this slot
- */
-struct input_mt_slot {
-	int abs[ABS_MT_LAST - ABS_MT_FIRST + 1];
-};
-
-/**
  * struct input_dev - represents an input device
  * @name: name of the device
  * @phys: physical path to the device in the system hierarchy
  * @uniq: unique identification code for the device (if device has it)
  * @id: id of the device (struct input_id)
+ * @propbit: bitmap of device properties and quirks
  * @evbit: bitmap of types of events supported by the device (EV_KEY,
  *	EV_REL, etc.)
  * @keybit: bitmap of keys/buttons this device has
@@ -1155,6 +1163,7 @@ struct input_mt_slot {
  *	of tracked contacts
  * @mtsize: number of MT slots the device uses
  * @slot: MT slot currently being transmitted
+ * @trkid: stores MT tracking ID for the current contact
  * @absinfo: array of &struct input_absinfo elements holding information
  *	about absolute axes (current value, min, max, flat, fuzz,
  *	resolution)
@@ -1203,6 +1212,8 @@ struct input_dev {
 	const char *uniq;
 	struct input_id id;
 
+	unsigned long propbit[BITS_TO_LONGS(INPUT_PROP_CNT)];
+
 	unsigned long evbit[BITS_TO_LONGS(EV_CNT)];
 	unsigned long keybit[BITS_TO_LONGS(KEY_CNT)];
 	unsigned long relbit[BITS_TO_LONGS(REL_CNT)];
@@ -1239,6 +1250,7 @@ struct input_dev {
 	struct input_mt_slot *mt;
 	int mtsize;
 	int slot;
+	int trkid;
 
 	struct input_absinfo *absinfo;
 
@@ -1488,11 +1500,6 @@ static inline void input_mt_sync(struct input_dev *dev)
 	input_event(dev, EV_SYN, SYN_MT_REPORT, 0);
 }
 
-static inline void input_mt_slot(struct input_dev *dev, int slot)
-{
-	input_event(dev, EV_ABS, ABS_MT_SLOT, slot);
-}
-
 void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code);
 
 /**
@@ -1605,8 +1612,5 @@ int input_ff_erase(struct input_dev *dev, int effect_id, struct file *file);
 int input_ff_create_memless(struct input_dev *dev, void *data,
 		int (*play_effect)(struct input_dev *, void *, struct ff_effect *));
 
-int input_mt_create_slots(struct input_dev *dev, unsigned int num_slots);
-void input_mt_destroy_slots(struct input_dev *dev);
-
 #endif
 #endif
diff --git a/include/linux/input/cma3000.h b/include/linux/input/cma3000.h
new file mode 100644
index 000000000000..cbbaac27d311
--- /dev/null
+++ b/include/linux/input/cma3000.h
@@ -0,0 +1,59 @@
+/*
+ * VTI CMA3000_Dxx Accelerometer driver
+ *
+ * Copyright (C) 2010 Texas Instruments
+ * Author: Hemanth V <hemanthv@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _LINUX_CMA3000_H
+#define _LINUX_CMA3000_H
+
+#define CMAMODE_DEFAULT    0
+#define CMAMODE_MEAS100    1
+#define CMAMODE_MEAS400    2
+#define CMAMODE_MEAS40     3
+#define CMAMODE_MOTDET     4
+#define CMAMODE_FF100      5
+#define CMAMODE_FF400      6
+#define CMAMODE_POFF       7
+
+#define CMARANGE_2G   2000
+#define CMARANGE_8G   8000
+
+/**
+ * struct cma3000_i2c_platform_data - CMA3000 Platform data
+ * @fuzz_x: Noise on X Axis
+ * @fuzz_y: Noise on Y Axis
+ * @fuzz_z: Noise on Z Axis
+ * @g_range: G range in milli g i.e 2000 or 8000
+ * @mode: Operating mode
+ * @mdthr: Motion detect threshold value
+ * @mdfftmr: Motion detect and free fall time value
+ * @ffthr: Free fall threshold value
+ */
+
+struct cma3000_platform_data {
+	int fuzz_x;
+	int fuzz_y;
+	int fuzz_z;
+	int g_range;
+	uint8_t mode;
+	uint8_t mdthr;
+	uint8_t mdfftmr;
+	uint8_t ffthr;
+	unsigned long irqflags;
+};
+
+#endif
diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h
new file mode 100644
index 000000000000..b3ac06a4435d
--- /dev/null
+++ b/include/linux/input/mt.h
@@ -0,0 +1,57 @@
+#ifndef _INPUT_MT_H
+#define _INPUT_MT_H
+
+/*
+ * Input Multitouch Library
+ *
+ * Copyright (c) 2010 Henrik Rydberg
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/input.h>
+
+#define TRKID_MAX	0xffff
+
+/**
+ * struct input_mt_slot - represents the state of an input MT slot
+ * @abs: holds current values of ABS_MT axes for this slot
+ */
+struct input_mt_slot {
+	int abs[ABS_MT_LAST - ABS_MT_FIRST + 1];
+};
+
+static inline void input_mt_set_value(struct input_mt_slot *slot,
+				      unsigned code, int value)
+{
+	slot->abs[code - ABS_MT_FIRST] = value;
+}
+
+static inline int input_mt_get_value(const struct input_mt_slot *slot,
+				     unsigned code)
+{
+	return slot->abs[code - ABS_MT_FIRST];
+}
+
+int input_mt_init_slots(struct input_dev *dev, unsigned int num_slots);
+void input_mt_destroy_slots(struct input_dev *dev);
+
+static inline int input_mt_new_trkid(struct input_dev *dev)
+{
+	return dev->trkid++ & TRKID_MAX;
+}
+
+static inline void input_mt_slot(struct input_dev *dev, int slot)
+{
+	input_event(dev, EV_ABS, ABS_MT_SLOT, slot);
+}
+
+void input_mt_report_slot_state(struct input_dev *dev,
+				unsigned int tool_type, bool active);
+
+void input_mt_report_finger_count(struct input_dev *dev, int count);
+void input_mt_report_pointer_emulation(struct input_dev *dev, bool use_count);
+
+#endif
diff --git a/include/linux/uinput.h b/include/linux/uinput.h
index 05f7fed2b173..d28c726ede4f 100644
--- a/include/linux/uinput.h
+++ b/include/linux/uinput.h
@@ -104,6 +104,7 @@ struct uinput_ff_erase {
 #define UI_SET_FFBIT		_IOW(UINPUT_IOCTL_BASE, 107, int)
 #define UI_SET_PHYS		_IOW(UINPUT_IOCTL_BASE, 108, char*)
 #define UI_SET_SWBIT		_IOW(UINPUT_IOCTL_BASE, 109, int)
+#define UI_SET_PROPBIT		_IOW(UINPUT_IOCTL_BASE, 110, int)
 
 #define UI_BEGIN_FF_UPLOAD	_IOWR(UINPUT_IOCTL_BASE, 200, struct uinput_ff_upload)
 #define UI_END_FF_UPLOAD	_IOW(UINPUT_IOCTL_BASE, 201, struct uinput_ff_upload)