bnx2x: Separated FW from the source.

>From now on FW will be downloaded from the binary file using request_firmware.

There will be different files for every supported chip. Currently 57710 (e1) and
57711 (e1h).

File names have the following format: bnx2x-<chip version>-<FW version>.fw.
ihex versions of current FW files are submitted in the next patch.

Each binary file has a header in the following format:


struct bnx2x_fw_file_section {
	__be32 len;
	__be32 offset;
}

struct bnx2x_fw_file_hdr {
	struct bnx2x_fw_file_section init_ops;
	struct bnx2x_fw_file_section init_ops_offsets;
	struct bnx2x_fw_file_section init_data;
	struct bnx2x_fw_file_section tsem_int_table_data;
	struct bnx2x_fw_file_section tsem_pram_data;
	struct bnx2x_fw_file_section usem_int_table_data;
	struct bnx2x_fw_file_section usem_pram_data;
	struct bnx2x_fw_file_section csem_int_table_data;
	struct bnx2x_fw_file_section csem_pram_data;
	struct bnx2x_fw_file_section xsem_int_table_data;
	struct bnx2x_fw_file_section xsem_pram_data;
	struct bnx2x_fw_file_section fw_version;
}

Each bnx2x_fw_file_section contains the length and the offset of the appropriate
section in the binary file. Values are stored in the big endian format.

Data types of arrays:

init_data            __be32
init_ops_offsets     __be16
XXsem_pram_data         u8
XXsem_int_table_data    u8
init_ops             struct raw_op {
                          u8   op;
			__be24 offset;
                        __be32 data;
		     }
fw_version              u8

>From now boundaries of a specific initialization stage are stored in
init_ops_offsets array instead of being defined by separate macroes. The index 
in init_ops_offsets is calculated by BLOCK_OPS_IDX macro:

#define BLOCK_OPS_IDX(block, stage, end) \
       (2*(((block)*STAGE_IDX_MAX) + (stage)) + (end))

Security:

In addition to sanity check of array boundaries bnx2x will check a FW version.
Additional checks might be added in the future.

Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 files changed, 866 insertions, 598 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 3320e7761576..bc7eef12d955 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2676,6 +2676,7 @@ config TEHUTI
 config BNX2X
 	tristate "Broadcom NetXtremeII 10Gb support"
 	depends on PCI
+	select FW_LOADER
 	select ZLIB_INFLATE
 	select LIBCRC32C
 	help
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index a329bee25550..8678457849f9 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -965,6 +965,21 @@ struct bnx2x {
 	int			gunzip_outlen;
 #define FW_BUF_SIZE			0x8000
 
+	struct raw_op          *init_ops;
+	/* Init blocks offsets inside init_ops */
+	u16                    *init_ops_offsets;
+	/* Data blob - has 32 bit granularity */
+	u32                    *init_data;
+	/* Zipped PRAM blobs - raw data */
+	const u8               *tsem_int_table_data;
+	const u8               *tsem_pram_data;
+	const u8               *usem_int_table_data;
+	const u8               *usem_pram_data;
+	const u8               *xsem_int_table_data;
+	const u8               *xsem_pram_data;
+	const u8               *csem_int_table_data;
+	const u8               *csem_pram_data;
+        const struct firmware  *firmware;
 };
 
 
diff --git a/drivers/net/bnx2x_fw_file_hdr.h b/drivers/net/bnx2x_fw_file_hdr.h
new file mode 100644
index 000000000000..3f5ee5d7cc2a
--- /dev/null
+++ b/drivers/net/bnx2x_fw_file_hdr.h
@@ -0,0 +1,37 @@
+/* bnx2x_fw_file_hdr.h: FW binary file header structure.
+ *
+ * Copyright (c) 2007-2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Vladislav Zolotarov <vladz@broadcom.com>
+ * Based on the original idea of John Wright <john.wright@hp.com>.
+ */
+
+#ifndef BNX2X_INIT_FILE_HDR_H
+#define BNX2X_INIT_FILE_HDR_H
+
+struct bnx2x_fw_file_section {
+	__be32 len;
+	__be32 offset;
+};
+
+struct bnx2x_fw_file_hdr {
+	struct bnx2x_fw_file_section init_ops;
+	struct bnx2x_fw_file_section init_ops_offsets;
+	struct bnx2x_fw_file_section init_data;
+	struct bnx2x_fw_file_section tsem_int_table_data;
+	struct bnx2x_fw_file_section tsem_pram_data;
+	struct bnx2x_fw_file_section usem_int_table_data;
+	struct bnx2x_fw_file_section usem_pram_data;
+	struct bnx2x_fw_file_section csem_int_table_data;
+	struct bnx2x_fw_file_section csem_pram_data;
+	struct bnx2x_fw_file_section xsem_int_table_data;
+	struct bnx2x_fw_file_section xsem_pram_data;
+	struct bnx2x_fw_file_section fw_version;
+};
+
+#endif /* BNX2X_INIT_FILE_HDR_H */
diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h
index 39ba2936c0c2..3ba4d888068f 100644
--- a/drivers/net/bnx2x_init.h
+++ b/drivers/net/bnx2x_init.h
@@ -1,4 +1,5 @@
 /* bnx2x_init.h: Broadcom Everest network driver.
+ *               Structures and macroes needed during the initialization.
  *
  * Copyright (c) 2007-2009 Broadcom Corporation
  *
@@ -8,6 +9,7 @@
  *
  * Maintained by: Eilon Greenstein <eilong@broadcom.com>
  * Written by: Eliezer Tamir
+ * Modified by: Vladislav Zolotarov <vladz@broadcom.com>
  */
 
 #ifndef BNX2X_INIT_H
@@ -45,33 +47,71 @@
 #define OP_WR_64		0x8 /* write 64 bit pattern */
 #define OP_WB			0x9 /* copy a string using DMAE */
 
-/* Operation specific for E1 */
-#define OP_RD_E1		0xa /* read single register */
-#define OP_WR_E1		0xb /* write single register */
-#define OP_IW_E1		0xc /* write single register using mailbox */
-#define OP_SW_E1		0xd /* copy a string to the device */
-#define OP_SI_E1		0xe /* copy a string using mailbox */
-#define OP_ZR_E1		0xf /* clear memory */
-#define OP_ZP_E1		0x10 /* unzip then copy with DMAE */
-#define OP_WR_64_E1		0x11 /* write 64 bit pattern on E1 */
-#define OP_WB_E1		0x12 /* copy a string using DMAE */
-
-/* Operation specific for E1H */
-#define OP_RD_E1H		0x13 /* read single register */
-#define OP_WR_E1H		0x14 /* write single register */
-#define OP_IW_E1H		0x15 /* write single register using mailbox */
-#define OP_SW_E1H		0x16 /* copy a string to the device */
-#define OP_SI_E1H		0x17 /* copy a string using mailbox */
-#define OP_ZR_E1H		0x18 /* clear memory */
-#define OP_ZP_E1H		0x19 /* unzip then copy with DMAE */
-#define OP_WR_64_E1H		0x1a /* write 64 bit pattern on E1H */
-#define OP_WB_E1H		0x1b /* copy a string using DMAE */
-
 /* FPGA and EMUL specific operations */
-#define OP_WR_EMUL_E1H		0x1c /* write single register on E1H Emul */
-#define OP_WR_EMUL		0x1d /* write single register on Emulation */
-#define OP_WR_FPGA		0x1e /* write single register on FPGA */
-#define OP_WR_ASIC		0x1f /* write single register on ASIC */
+#define OP_WR_EMUL		0xa /* write single register on Emulation */
+#define OP_WR_FPGA		0xb /* write single register on FPGA */
+#define OP_WR_ASIC		0xc /* write single register on ASIC */
+
+/* Init stages */
+#define COMMON_STAGE            0
+#define PORT0_STAGE     	1
+#define PORT1_STAGE     	2
+/* Never reorder FUNCx stages !!! */
+#define FUNC0_STAGE     	3
+#define FUNC1_STAGE     	4
+#define FUNC2_STAGE     	5
+#define FUNC3_STAGE     	6
+#define FUNC4_STAGE     	7
+#define FUNC5_STAGE     	8
+#define FUNC6_STAGE     	9
+#define FUNC7_STAGE     	10
+#define STAGE_IDX_MAX   	11
+
+#define STAGE_START     	0
+#define STAGE_END       	1
+
+
+/* Indices of blocks */
+#define PRS_BLOCK               0
+#define SRCH_BLOCK              1
+#define TSDM_BLOCK              2
+#define TCM_BLOCK               3
+#define BRB1_BLOCK              4
+#define TSEM_BLOCK              5
+#define PXPCS_BLOCK             6
+#define EMAC0_BLOCK             7
+#define EMAC1_BLOCK             8
+#define DBU_BLOCK               9
+#define MISC_BLOCK              10
+#define DBG_BLOCK               11
+#define NIG_BLOCK               12
+#define MCP_BLOCK               13
+#define UPB_BLOCK               14
+#define CSDM_BLOCK              15
+#define USDM_BLOCK              16
+#define CCM_BLOCK               17
+#define UCM_BLOCK               18
+#define USEM_BLOCK              19
+#define CSEM_BLOCK              20
+#define XPB_BLOCK               21
+#define DQ_BLOCK                22
+#define TIMERS_BLOCK            23
+#define XSDM_BLOCK              24
+#define QM_BLOCK                25
+#define PBF_BLOCK               26
+#define XCM_BLOCK               27
+#define XSEM_BLOCK              28
+#define CDU_BLOCK               29
+#define DMAE_BLOCK              30
+#define PXP_BLOCK               31
+#define CFC_BLOCK               32
+#define HC_BLOCK                33
+#define PXP2_BLOCK              34
+#define MISC_AEU_BLOCK          35
+
+/* Returns the index of start or end of a specific block stage in ops array*/
+#define BLOCK_OPS_IDX(block, stage, end) \
+       (2*(((block)*STAGE_IDX_MAX) + (stage)) + (end))
 
 
 struct raw_op {
@@ -118,292 +158,6 @@ union init_op {
 	struct raw_op		raw;
 };
 
-#include "bnx2x_init_values.h"
-
-static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val);
-static int bnx2x_gunzip(struct bnx2x *bp, u8 *zbuf, int len);
-
-static void bnx2x_init_str_wr(struct bnx2x *bp, u32 addr, const u32 *data,
-			      u32 len)
-{
-	int i;
-
-	for (i = 0; i < len; i++) {
-		REG_WR(bp, addr + i*4, data[i]);
-		if (!(i % 10000)) {
-			touch_softlockup_watchdog();
-			cpu_relax();
-		}
-	}
-}
-
-static void bnx2x_init_ind_wr(struct bnx2x *bp, u32 addr, const u32 *data,
-			      u16 len)
-{
-	int i;
-
-	for (i = 0; i < len; i++) {
-		REG_WR_IND(bp, addr + i*4, data[i]);
-		if (!(i % 10000)) {
-			touch_softlockup_watchdog();
-			cpu_relax();
-		}
-	}
-}
-
-static void bnx2x_write_big_buf(struct bnx2x *bp, u32 addr, u32 len)
-{
-	int offset = 0;
-
-	if (bp->dmae_ready) {
-		while (len > DMAE_LEN32_WR_MAX) {
-			bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
-					 addr + offset, DMAE_LEN32_WR_MAX);
-			offset += DMAE_LEN32_WR_MAX * 4;
-			len -= DMAE_LEN32_WR_MAX;
-		}
-		bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
-				 addr + offset, len);
-	} else
-		bnx2x_init_str_wr(bp, addr, bp->gunzip_buf, len);
-}
-
-static void bnx2x_init_fill(struct bnx2x *bp, u32 addr, int fill, u32 len)
-{
-	u32 buf_len = (((len * 4) > FW_BUF_SIZE) ? FW_BUF_SIZE : (len * 4));
-	u32 buf_len32 = buf_len / 4;
-	int i;
-
-	memset(bp->gunzip_buf, fill, buf_len);
-
-	for (i = 0; i < len; i += buf_len32) {
-		u32 cur_len = min(buf_len32, len - i);
-
-		bnx2x_write_big_buf(bp, addr + i * 4, cur_len);
-	}
-}
-
-static void bnx2x_init_wr_64(struct bnx2x *bp, u32 addr, const u32 *data,
-			     u32 len64)
-{
-	u32 buf_len32 = FW_BUF_SIZE / 4;
-	u32 len = len64 * 2;
-	u64 data64 = 0;
-	int i;
-
-	/* 64 bit value is in a blob: first low DWORD, then high DWORD */
-	data64 = HILO_U64((*(data + 1)), (*data));
-	len64 = min((u32)(FW_BUF_SIZE/8), len64);
-	for (i = 0; i < len64; i++) {
-		u64 *pdata = ((u64 *)(bp->gunzip_buf)) + i;
-
-		*pdata = data64;
-	}
-
-	for (i = 0; i < len; i += buf_len32) {
-		u32 cur_len = min(buf_len32, len - i);
-
-		bnx2x_write_big_buf(bp, addr + i * 4, cur_len);
-	}
-}
-
-/*********************************************************
-   There are different blobs for each PRAM section.
-   In addition, each blob write operation is divided into a few operations
-   in order to decrease the amount of phys. contiguous buffer needed.
-   Thus, when we select a blob the address may be with some offset
-   from the beginning of PRAM section.
-   The same holds for the INT_TABLE sections.
-**********************************************************/
-#define IF_IS_INT_TABLE_ADDR(base, addr) \
-			if (((base) <= (addr)) && ((base) + 0x400 >= (addr)))
-
-#define IF_IS_PRAM_ADDR(base, addr) \
-			if (((base) <= (addr)) && ((base) + 0x40000 >= (addr)))
-
-static const u32 *bnx2x_sel_blob(u32 addr, const u32 *data, int is_e1)
-{
-	IF_IS_INT_TABLE_ADDR(TSEM_REG_INT_TABLE, addr)
-		data = is_e1 ? tsem_int_table_data_e1 :
-			       tsem_int_table_data_e1h;
-	else
-		IF_IS_INT_TABLE_ADDR(CSEM_REG_INT_TABLE, addr)
-			data = is_e1 ? csem_int_table_data_e1 :
-				       csem_int_table_data_e1h;
-	else
-		IF_IS_INT_TABLE_ADDR(USEM_REG_INT_TABLE, addr)
-			data = is_e1 ? usem_int_table_data_e1 :
-				       usem_int_table_data_e1h;
-	else
-		IF_IS_INT_TABLE_ADDR(XSEM_REG_INT_TABLE, addr)
-			data = is_e1 ? xsem_int_table_data_e1 :
-				       xsem_int_table_data_e1h;
-	else
-		IF_IS_PRAM_ADDR(TSEM_REG_PRAM, addr)
-			data = is_e1 ? tsem_pram_data_e1 : tsem_pram_data_e1h;
-	else
-		IF_IS_PRAM_ADDR(CSEM_REG_PRAM, addr)
-			data = is_e1 ? csem_pram_data_e1 : csem_pram_data_e1h;
-	else
-		IF_IS_PRAM_ADDR(USEM_REG_PRAM, addr)
-			data = is_e1 ? usem_pram_data_e1 : usem_pram_data_e1h;
-	else
-		IF_IS_PRAM_ADDR(XSEM_REG_PRAM, addr)
-			data = is_e1 ? xsem_pram_data_e1 : xsem_pram_data_e1h;
-
-	return data;
-}
-
-static void bnx2x_init_wr_wb(struct bnx2x *bp, u32 addr, const u32 *data,
-			     u32 len, int gunzip, int is_e1, u32 blob_off)
-{
-	int offset = 0;
-
-	data = bnx2x_sel_blob(addr, data, is_e1) + blob_off;
-
-	if (gunzip) {
-		int rc;
-#ifdef __BIG_ENDIAN
-		int i, size;
-		u32 *temp;
-
-		temp = kmalloc(len, GFP_KERNEL);
-		size = (len / 4) + ((len % 4) ? 1 : 0);
-		for (i = 0; i < size; i++)
-			temp[i] = swab32(data[i]);
-		data = temp;
-#endif
-		rc = bnx2x_gunzip(bp, (u8 *)data, len);
-		if (rc) {
-			BNX2X_ERR("gunzip failed ! rc %d\n", rc);
-#ifdef __BIG_ENDIAN
-			kfree(temp);
-#endif
-			return;
-		}
-		len = bp->gunzip_outlen;
-#ifdef __BIG_ENDIAN
-		kfree(temp);
-		for (i = 0; i < len; i++)
-			((u32 *)bp->gunzip_buf)[i] =
-					swab32(((u32 *)bp->gunzip_buf)[i]);
-#endif
-	} else {
-		if ((len * 4) > FW_BUF_SIZE) {
-			BNX2X_ERR("LARGE DMAE OPERATION ! "
-				  "addr 0x%x  len 0x%x\n", addr, len*4);
-			return;
-		}
-		memcpy(bp->gunzip_buf, data, len * 4);
-	}
-
-	if (bp->dmae_ready) {
-		while (len > DMAE_LEN32_WR_MAX) {
-			bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
-					 addr + offset, DMAE_LEN32_WR_MAX);
-			offset += DMAE_LEN32_WR_MAX * 4;
-			len -= DMAE_LEN32_WR_MAX;
-		}
-		bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
-				 addr + offset, len);
-	} else
-		bnx2x_init_ind_wr(bp, addr, bp->gunzip_buf, len);
-}
-
-static void bnx2x_init_block(struct bnx2x *bp, u32 op_start, u32 op_end)
-{
-	int is_e1       = CHIP_IS_E1(bp);
-	int is_e1h      = CHIP_IS_E1H(bp);
-	int is_emul_e1h = (CHIP_REV_IS_EMUL(bp) && is_e1h);
-	int hw_wr, i;
-	union init_op *op;
-	u32 op_type, addr, len;
-	const u32 *data, *data_base;
-
-	if (CHIP_REV_IS_FPGA(bp))
-		hw_wr = OP_WR_FPGA;
-	else if (CHIP_REV_IS_EMUL(bp))
-		hw_wr = OP_WR_EMUL;
-	else
-		hw_wr = OP_WR_ASIC;
-
-	if (is_e1)
-		data_base = init_data_e1;
-	else /* CHIP_IS_E1H(bp) */
-		data_base = init_data_e1h;
-
-	for (i = op_start; i < op_end; i++) {
-
-		op = (union init_op *)&(init_ops[i]);
-
-		op_type = op->str_wr.op;
-		addr = op->str_wr.offset;
-		len = op->str_wr.data_len;
-		data = data_base + op->str_wr.data_off;
-
-		/* careful! it must be in order */
-		if (unlikely(op_type > OP_WB)) {
-
-			/* If E1 only */
-			if (op_type <= OP_WB_E1) {
-				if (is_e1)
-					op_type -= (OP_RD_E1 - OP_RD);
-
-			/* If E1H only */
-			} else if (op_type <= OP_WB_E1H) {
-				if (is_e1h)
-					op_type -= (OP_RD_E1H - OP_RD);
-			}
-
-			/* HW/EMUL specific */
-			if (op_type == hw_wr)
-				op_type = OP_WR;
-
-			/* EMUL on E1H is special */
-			if ((op_type == OP_WR_EMUL_E1H) && is_emul_e1h)
-				op_type = OP_WR;
-		}
-
-		switch (op_type) {
-		case OP_RD:
-			REG_RD(bp, addr);
-			break;
-		case OP_WR:
-			REG_WR(bp, addr, op->write.val);
-			break;
-		case OP_SW:
-			bnx2x_init_str_wr(bp, addr, data, len);
-			break;
-		case OP_WB:
-			bnx2x_init_wr_wb(bp, addr, data, len, 0, is_e1, 0);
-			break;
-		case OP_SI:
-			bnx2x_init_ind_wr(bp, addr, data, len);
-			break;
-		case OP_ZR:
-			bnx2x_init_fill(bp, addr, 0, op->zero.len);
-			break;
-		case OP_ZP:
-			bnx2x_init_wr_wb(bp, addr, data, len, 1, is_e1,
-					 op->str_wr.data_off);
-			break;
-		case OP_WR_64:
-			bnx2x_init_wr_64(bp, addr, data, len);
-			break;
-		default:
-			/* happens whenever an op is of a diff HW */
-#if 0
-			DP(NETIF_MSG_HW, "skipping init operation  "
-			   "index %d[%d:%d]: type %d  addr 0x%x  "
-			   "len %d(0x%x)\n",
-			   i, op_start, op_end, op_type, addr, len, len);
-#endif
-			break;
-		}
-	}
-}
-
-
 /****************************************************************************
 * PXP
 ****************************************************************************/
@@ -567,111 +321,6 @@ static const struct arb_line write_arb_addr[NUM_WR_Q-1] = {
 		PXP2_REG_RQ_BW_WR_UBOUND30}
 };
 
-static void bnx2x_init_pxp(struct bnx2x *bp)
-{
-	u16 devctl;
-	int r_order, w_order;
-	u32 val, i;
-
-	pci_read_config_word(bp->pdev,
-			     bp->pcie_cap + PCI_EXP_DEVCTL, &devctl);
-	DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl);
-	w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
-	if (bp->mrrs == -1)
-		r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12);
-	else {
-		DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs);
-		r_order = bp->mrrs;
-	}
-
-	if (r_order > MAX_RD_ORD) {
-		DP(NETIF_MSG_HW, "read order of %d  order adjusted to %d\n",
-		   r_order, MAX_RD_ORD);
-		r_order = MAX_RD_ORD;
-	}
-	if (w_order > MAX_WR_ORD) {
-		DP(NETIF_MSG_HW, "write order of %d  order adjusted to %d\n",
-		   w_order, MAX_WR_ORD);
-		w_order = MAX_WR_ORD;
-	}
-	if (CHIP_REV_IS_FPGA(bp)) {
-		DP(NETIF_MSG_HW, "write order adjusted to 1 for FPGA\n");
-		w_order = 0;
-	}
-	DP(NETIF_MSG_HW, "read order %d  write order %d\n", r_order, w_order);
-
-	for (i = 0; i < NUM_RD_Q-1; i++) {
-		REG_WR(bp, read_arb_addr[i].l, read_arb_data[i][r_order].l);
-		REG_WR(bp, read_arb_addr[i].add,
-		       read_arb_data[i][r_order].add);
-		REG_WR(bp, read_arb_addr[i].ubound,
-		       read_arb_data[i][r_order].ubound);
-	}
-
-	for (i = 0; i < NUM_WR_Q-1; i++) {
-		if ((write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L29) ||
-		    (write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L30)) {
-
-			REG_WR(bp, write_arb_addr[i].l,
-			       write_arb_data[i][w_order].l);
-
-			REG_WR(bp, write_arb_addr[i].add,
-			       write_arb_data[i][w_order].add);
-
-			REG_WR(bp, write_arb_addr[i].ubound,
-			       write_arb_data[i][w_order].ubound);
-		} else {
-
-			val = REG_RD(bp, write_arb_addr[i].l);
-			REG_WR(bp, write_arb_addr[i].l,
-			       val | (write_arb_data[i][w_order].l << 10));
-
-			val = REG_RD(bp, write_arb_addr[i].add);
-			REG_WR(bp, write_arb_addr[i].add,
-			       val | (write_arb_data[i][w_order].add << 10));
-
-			val = REG_RD(bp, write_arb_addr[i].ubound);
-			REG_WR(bp, write_arb_addr[i].ubound,
-			       val | (write_arb_data[i][w_order].ubound << 7));
-		}
-	}
-
-	val =  write_arb_data[NUM_WR_Q-1][w_order].add;
-	val += write_arb_data[NUM_WR_Q-1][w_order].ubound << 10;
-	val += write_arb_data[NUM_WR_Q-1][w_order].l << 17;
-	REG_WR(bp, PXP2_REG_PSWRQ_BW_RD, val);
-
-	val =  read_arb_data[NUM_RD_Q-1][r_order].add;
-	val += read_arb_data[NUM_RD_Q-1][r_order].ubound << 10;
-	val += read_arb_data[NUM_RD_Q-1][r_order].l << 17;
-	REG_WR(bp, PXP2_REG_PSWRQ_BW_WR, val);
-
-	REG_WR(bp, PXP2_REG_RQ_WR_MBS0, w_order);
-	REG_WR(bp, PXP2_REG_RQ_WR_MBS1, w_order);
-	REG_WR(bp, PXP2_REG_RQ_RD_MBS0, r_order);
-	REG_WR(bp, PXP2_REG_RQ_RD_MBS1, r_order);
-
-	if (r_order == MAX_RD_ORD)
-		REG_WR(bp, PXP2_REG_RQ_PDR_LIMIT, 0xe00);
-
-	REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order));
-
-	if (CHIP_IS_E1H(bp)) {
-		val = ((w_order == 0) ? 2 : 3);
-		REG_WR(bp, PXP2_REG_WR_HC_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_USDM_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_CSDM_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_TSDM_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_XSDM_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_QM_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_TM_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_SRC_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_DBG_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_DMAE_MPS, 2); /* DMAE is special */
-		REG_WR(bp, PXP2_REG_WR_CDU_MPS, val);
-	}
-}
-
 
 /****************************************************************************
 * CDU
@@ -695,128 +344,12 @@ static void bnx2x_init_pxp(struct bnx2x *bp)
 	(0x80 | ((_type) & 0xf << 3) | (CDU_CRC8(_cid, _region, _type) & 0x7))
 #define CDU_RSRVD_INVALIDATE_CONTEXT_VALUE(_val)	((_val) & ~0x80)
 
-/*****************************************************************************
- * Description:
- *         Calculates crc 8 on a word value: polynomial 0-1-2-8
- *         Code was translated from Verilog.
- ****************************************************************************/
-static u8 calc_crc8(u32 data, u8 crc)
-{
-	u8 D[32];
-	u8 NewCRC[8];
-	u8 C[8];
-	u8 crc_res;
-	u8 i;
-
-	/* split the data into 31 bits */
-	for (i = 0; i < 32; i++) {
-		D[i] = data & 1;
-		data = data >> 1;
-	}
-
-	/* split the crc into 8 bits */
-	for (i = 0; i < 8; i++) {
-		C[i] = crc & 1;
-		crc = crc >> 1;
-	}
-
-	NewCRC[0] = D[31] ^ D[30] ^ D[28] ^ D[23] ^ D[21] ^ D[19] ^ D[18] ^
-		D[16] ^ D[14] ^ D[12] ^ D[8] ^ D[7] ^ D[6] ^ D[0] ^ C[4] ^
-		C[6] ^ C[7];
-	NewCRC[1] = D[30] ^ D[29] ^ D[28] ^ D[24] ^ D[23] ^ D[22] ^ D[21] ^
-		D[20] ^ D[18] ^ D[17] ^ D[16] ^ D[15] ^ D[14] ^ D[13] ^
-		D[12] ^ D[9] ^ D[6] ^ D[1] ^ D[0] ^ C[0] ^ C[4] ^ C[5] ^ C[6];
-	NewCRC[2] = D[29] ^ D[28] ^ D[25] ^ D[24] ^ D[22] ^ D[17] ^ D[15] ^
-		D[13] ^ D[12] ^ D[10] ^ D[8] ^ D[6] ^ D[2] ^ D[1] ^ D[0] ^
-		C[0] ^ C[1] ^ C[4] ^ C[5];
-	NewCRC[3] = D[30] ^ D[29] ^ D[26] ^ D[25] ^ D[23] ^ D[18] ^ D[16] ^
-		D[14] ^ D[13] ^ D[11] ^ D[9] ^ D[7] ^ D[3] ^ D[2] ^ D[1] ^
-		C[1] ^ C[2] ^ C[5] ^ C[6];
-	NewCRC[4] = D[31] ^ D[30] ^ D[27] ^ D[26] ^ D[24] ^ D[19] ^ D[17] ^
-		D[15] ^ D[14] ^ D[12] ^ D[10] ^ D[8] ^ D[4] ^ D[3] ^ D[2] ^
-		C[0] ^ C[2] ^ C[3] ^ C[6] ^ C[7];
-	NewCRC[5] = D[31] ^ D[28] ^ D[27] ^ D[25] ^ D[20] ^ D[18] ^ D[16] ^
-		D[15] ^ D[13] ^ D[11] ^ D[9] ^ D[5] ^ D[4] ^ D[3] ^ C[1] ^
-		C[3] ^ C[4] ^ C[7];
-	NewCRC[6] = D[29] ^ D[28] ^ D[26] ^ D[21] ^ D[19] ^ D[17] ^ D[16] ^
-		D[14] ^ D[12] ^ D[10] ^ D[6] ^ D[5] ^ D[4] ^ C[2] ^ C[4] ^
-		C[5];
-	NewCRC[7] = D[30] ^ D[29] ^ D[27] ^ D[22] ^ D[20] ^ D[18] ^ D[17] ^
-		D[15] ^ D[13] ^ D[11] ^ D[7] ^ D[6] ^ D[5] ^ C[3] ^ C[5] ^
-		C[6];
-
-	crc_res = 0;
-	for (i = 0; i < 8; i++)
-		crc_res |= (NewCRC[i] << i);
-
-	return crc_res;
-}
 
 /* registers addresses are not in order
    so these arrays help simplify the code */
-static const int cm_start[E1H_FUNC_MAX][9] = {
-	{MISC_FUNC0_START, TCM_FUNC0_START, UCM_FUNC0_START, CCM_FUNC0_START,
-	 XCM_FUNC0_START, TSEM_FUNC0_START, USEM_FUNC0_START, CSEM_FUNC0_START,
-	 XSEM_FUNC0_START},
-	{MISC_FUNC1_START, TCM_FUNC1_START, UCM_FUNC1_START, CCM_FUNC1_START,
-	 XCM_FUNC1_START, TSEM_FUNC1_START, USEM_FUNC1_START, CSEM_FUNC1_START,
-	 XSEM_FUNC1_START},
-	{MISC_FUNC2_START, TCM_FUNC2_START, UCM_FUNC2_START, CCM_FUNC2_START,
-	 XCM_FUNC2_START, TSEM_FUNC2_START, USEM_FUNC2_START, CSEM_FUNC2_START,
-	 XSEM_FUNC2_START},
-	{MISC_FUNC3_START, TCM_FUNC3_START, UCM_FUNC3_START, CCM_FUNC3_START,
-	 XCM_FUNC3_START, TSEM_FUNC3_START, USEM_FUNC3_START, CSEM_FUNC3_START,
-	 XSEM_FUNC3_START},
-	{MISC_FUNC4_START, TCM_FUNC4_START, UCM_FUNC4_START, CCM_FUNC4_START,
-	 XCM_FUNC4_START, TSEM_FUNC4_START, USEM_FUNC4_START, CSEM_FUNC4_START,
-	 XSEM_FUNC4_START},
-	{MISC_FUNC5_START, TCM_FUNC5_START, UCM_FUNC5_START, CCM_FUNC5_START,
-	 XCM_FUNC5_START, TSEM_FUNC5_START, USEM_FUNC5_START, CSEM_FUNC5_START,
-	 XSEM_FUNC5_START},
-	{MISC_FUNC6_START, TCM_FUNC6_START, UCM_FUNC6_START, CCM_FUNC6_START,
-	 XCM_FUNC6_START, TSEM_FUNC6_START, USEM_FUNC6_START, CSEM_FUNC6_START,
-	 XSEM_FUNC6_START},
-	{MISC_FUNC7_START, TCM_FUNC7_START, UCM_FUNC7_START, CCM_FUNC7_START,
-	 XCM_FUNC7_START, TSEM_FUNC7_START, USEM_FUNC7_START, CSEM_FUNC7_START,
-	 XSEM_FUNC7_START}
-};
-
-static const int cm_end[E1H_FUNC_MAX][9] = {
-	{MISC_FUNC0_END, TCM_FUNC0_END, UCM_FUNC0_END, CCM_FUNC0_END,
-	 XCM_FUNC0_END, TSEM_FUNC0_END, USEM_FUNC0_END, CSEM_FUNC0_END,
-	 XSEM_FUNC0_END},
-	{MISC_FUNC1_END, TCM_FUNC1_END, UCM_FUNC1_END, CCM_FUNC1_END,
-	 XCM_FUNC1_END, TSEM_FUNC1_END, USEM_FUNC1_END, CSEM_FUNC1_END,
-	 XSEM_FUNC1_END},
-	{MISC_FUNC2_END, TCM_FUNC2_END, UCM_FUNC2_END, CCM_FUNC2_END,
-	 XCM_FUNC2_END, TSEM_FUNC2_END, USEM_FUNC2_END, CSEM_FUNC2_END,
-	 XSEM_FUNC2_END},
-	{MISC_FUNC3_END, TCM_FUNC3_END, UCM_FUNC3_END, CCM_FUNC3_END,
-	 XCM_FUNC3_END, TSEM_FUNC3_END, USEM_FUNC3_END, CSEM_FUNC3_END,
-	 XSEM_FUNC3_END},
-	{MISC_FUNC4_END, TCM_FUNC4_END, UCM_FUNC4_END, CCM_FUNC4_END,
-	 XCM_FUNC4_END, TSEM_FUNC4_END, USEM_FUNC4_END, CSEM_FUNC4_END,
-	 XSEM_FUNC4_END},
-	{MISC_FUNC5_END, TCM_FUNC5_END, UCM_FUNC5_END, CCM_FUNC5_END,
-	 XCM_FUNC5_END, TSEM_FUNC5_END, USEM_FUNC5_END, CSEM_FUNC5_END,
-	 XSEM_FUNC5_END},
-	{MISC_FUNC6_END, TCM_FUNC6_END, UCM_FUNC6_END, CCM_FUNC6_END,
-	 XCM_FUNC6_END, TSEM_FUNC6_END, USEM_FUNC6_END, CSEM_FUNC6_END,
-	 XSEM_FUNC6_END},
-	{MISC_FUNC7_END, TCM_FUNC7_END, UCM_FUNC7_END, CCM_FUNC7_END,
-	 XCM_FUNC7_END, TSEM_FUNC7_END, USEM_FUNC7_END, CSEM_FUNC7_END,
-	 XSEM_FUNC7_END},
-};
-
-static const int hc_limits[E1H_FUNC_MAX][2] = {
-	{HC_FUNC0_START, HC_FUNC0_END},
-	{HC_FUNC1_START, HC_FUNC1_END},
-	{HC_FUNC2_START, HC_FUNC2_END},
-	{HC_FUNC3_START, HC_FUNC3_END},
-	{HC_FUNC4_START, HC_FUNC4_END},
-	{HC_FUNC5_START, HC_FUNC5_END},
-	{HC_FUNC6_START, HC_FUNC6_END},
-	{HC_FUNC7_START, HC_FUNC7_END}
+static const int cm_blocks[9] = {
+	MISC_BLOCK, TCM_BLOCK,  UCM_BLOCK,  CCM_BLOCK, XCM_BLOCK,
+	TSEM_BLOCK, USEM_BLOCK, CSEM_BLOCK, XSEM_BLOCK
 };
 
 #endif /* BNX2X_INIT_H */
diff --git a/drivers/net/bnx2x_init_ops.h b/drivers/net/bnx2x_init_ops.h
new file mode 100644
index 000000000000..32552b9366cb
--- /dev/null
+++ b/drivers/net/bnx2x_init_ops.h
@@ -0,0 +1,442 @@
+/* bnx2x_init_ops.h: Broadcom Everest network driver.
+ *               Static functions needed during the initialization.
+ *               This file is "included" in bnx2x_main.c.
+ *
+ * Copyright (c) 2007-2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Vladislav Zolotarov <vladz@broadcom.com>
+ */
+#ifndef BNX2X_INIT_OPS_H
+#define BNX2X_INIT_OPS_H
+
+static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val);
+static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len);
+
+static void bnx2x_init_str_wr(struct bnx2x *bp, u32 addr, const u32 *data,
+			      u32 len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		REG_WR(bp, addr + i*4, data[i]);
+		if (!(i % 10000)) {
+			touch_softlockup_watchdog();
+			cpu_relax();
+		}
+	}
+}
+
+static void bnx2x_init_ind_wr(struct bnx2x *bp, u32 addr, const u32 *data,
+			      u16 len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		REG_WR_IND(bp, addr + i*4, data[i]);
+		if (!(i % 10000)) {
+			touch_softlockup_watchdog();
+			cpu_relax();
+		}
+	}
+}
+
+static void bnx2x_write_big_buf(struct bnx2x *bp, u32 addr, u32 len)
+{
+	int offset = 0;
+
+	if (bp->dmae_ready) {
+		while (len > DMAE_LEN32_WR_MAX) {
+			bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
+					 addr + offset, DMAE_LEN32_WR_MAX);
+			offset += DMAE_LEN32_WR_MAX * 4;
+			len -= DMAE_LEN32_WR_MAX;
+		}
+		bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
+				 addr + offset, len);
+	} else
+		bnx2x_init_str_wr(bp, addr, bp->gunzip_buf, len);
+}
+
+static void bnx2x_init_fill(struct bnx2x *bp, u32 addr, int fill, u32 len)
+{
+	u32 buf_len = (((len * 4) > FW_BUF_SIZE) ? FW_BUF_SIZE : (len * 4));
+	u32 buf_len32 = buf_len / 4;
+	int i;
+
+	memset(bp->gunzip_buf, fill, buf_len);
+
+	for (i = 0; i < len; i += buf_len32) {
+		u32 cur_len = min(buf_len32, len - i);
+
+		bnx2x_write_big_buf(bp, addr + i * 4, cur_len);
+	}
+}
+
+static void bnx2x_init_wr_64(struct bnx2x *bp, u32 addr, const u32 *data,
+			     u32 len64)
+{
+	u32 buf_len32 = FW_BUF_SIZE / 4;
+	u32 len = len64 * 2;
+	u64 data64 = 0;
+	int i;
+
+	/* 64 bit value is in a blob: first low DWORD, then high DWORD */
+	data64 = HILO_U64((*(data + 1)), (*data));
+	len64 = min((u32)(FW_BUF_SIZE/8), len64);
+	for (i = 0; i < len64; i++) {
+		u64 *pdata = ((u64 *)(bp->gunzip_buf)) + i;
+
+		*pdata = data64;
+	}
+
+	for (i = 0; i < len; i += buf_len32) {
+		u32 cur_len = min(buf_len32, len - i);
+
+		bnx2x_write_big_buf(bp, addr + i * 4, cur_len);
+	}
+}
+
+/*********************************************************
+   There are different blobs for each PRAM section.
+   In addition, each blob write operation is divided into a few operations
+   in order to decrease the amount of phys. contiguous buffer needed.
+   Thus, when we select a blob the address may be with some offset
+   from the beginning of PRAM section.
+   The same holds for the INT_TABLE sections.
+**********************************************************/
+#define IF_IS_INT_TABLE_ADDR(base, addr) \
+			if (((base) <= (addr)) && ((base) + 0x400 >= (addr)))
+
+#define IF_IS_PRAM_ADDR(base, addr) \
+			if (((base) <= (addr)) && ((base) + 0x40000 >= (addr)))
+
+static const u8 *bnx2x_sel_blob(struct bnx2x *bp, u32 addr, const u8 *data)
+{
+	IF_IS_INT_TABLE_ADDR(TSEM_REG_INT_TABLE, addr)
+		data = bp->tsem_int_table_data;
+	else IF_IS_INT_TABLE_ADDR(CSEM_REG_INT_TABLE, addr)
+		data = bp->csem_int_table_data;
+	else IF_IS_INT_TABLE_ADDR(USEM_REG_INT_TABLE, addr)
+		data = bp->usem_int_table_data;
+	else IF_IS_INT_TABLE_ADDR(XSEM_REG_INT_TABLE, addr)
+		data = bp->xsem_int_table_data;
+	else IF_IS_PRAM_ADDR(TSEM_REG_PRAM, addr)
+		data = bp->tsem_pram_data;
+	else IF_IS_PRAM_ADDR(CSEM_REG_PRAM, addr)
+		data = bp->csem_pram_data;
+	else IF_IS_PRAM_ADDR(USEM_REG_PRAM, addr)
+		data = bp->usem_pram_data;
+	else IF_IS_PRAM_ADDR(XSEM_REG_PRAM, addr)
+		data = bp->xsem_pram_data;
+
+	return data;
+}
+
+static void bnx2x_write_big_buf_wb(struct bnx2x *bp, u32 addr, u32 len)
+{
+	int offset = 0;
+
+	if (bp->dmae_ready) {
+		while (len > DMAE_LEN32_WR_MAX) {
+			bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
+					 addr + offset, DMAE_LEN32_WR_MAX);
+			offset += DMAE_LEN32_WR_MAX * 4;
+			len -= DMAE_LEN32_WR_MAX;
+		}
+		bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
+				 addr + offset, len);
+	} else
+		bnx2x_init_ind_wr(bp, addr, bp->gunzip_buf, len);
+}
+
+static void bnx2x_init_wr_wb(struct bnx2x *bp, u32 addr, const u32 *data,
+			     u32 len)
+{
+	/* This is needed for NO_ZIP mode, currently supported
+	   in little endian mode only */
+	data = (const u32*)bnx2x_sel_blob(bp, addr, (const u8*)data);
+
+	if ((len * 4) > FW_BUF_SIZE) {
+		BNX2X_ERR("LARGE DMAE OPERATION ! "
+			  "addr 0x%x  len 0x%x\n", addr, len*4);
+		return;
+	}
+	memcpy(bp->gunzip_buf, data, len * 4);
+
+	bnx2x_write_big_buf_wb(bp, addr, len);
+}
+
+static void bnx2x_init_wr_zp(struct bnx2x *bp, u32 addr,
+			     u32 len, u32 blob_off)
+{
+	int rc, i;
+        const u8 *data = NULL;
+
+	data = bnx2x_sel_blob(bp, addr, data) + 4*blob_off;
+
+	if (data == NULL) {
+		panic("Blob not found for addr 0x%x\n", addr);
+		return;
+	}
+
+	rc = bnx2x_gunzip(bp, data, len);
+	if (rc) {
+		BNX2X_ERR("gunzip failed ! addr 0x%x rc %d\n", addr, rc);
+		BNX2X_ERR("blob_offset=0x%x\n", blob_off);
+		return;
+	}
+
+	/* gunzip_outlen is in dwords */
+	len = bp->gunzip_outlen;
+	for (i = 0; i < len; i++)
+		((u32 *)bp->gunzip_buf)[i] =
+			cpu_to_le32(((u32 *)bp->gunzip_buf)[i]);
+
+	bnx2x_write_big_buf_wb(bp, addr, len);
+}
+
+static void bnx2x_init_block(struct bnx2x *bp, u32 block, u32 stage)
+{
+	int hw_wr, i;
+	u16 op_start =
+		bp->init_ops_offsets[BLOCK_OPS_IDX(block,stage,STAGE_START)];
+	u16 op_end =
+		bp->init_ops_offsets[BLOCK_OPS_IDX(block,stage,STAGE_END)];
+	union init_op *op;
+	u32 op_type, addr, len;
+	const u32 *data, *data_base;
+
+	/* If empty block */
+	if (op_start == op_end)
+		return;
+
+	if (CHIP_REV_IS_FPGA(bp))
+		hw_wr = OP_WR_FPGA;
+	else if (CHIP_REV_IS_EMUL(bp))
+		hw_wr = OP_WR_EMUL;
+	else
+		hw_wr = OP_WR_ASIC;
+
+	data_base = bp->init_data;
+
+	for (i = op_start; i < op_end; i++) {
+
+		op = (union init_op *)&(bp->init_ops[i]);
+
+		op_type = op->str_wr.op;
+		addr = op->str_wr.offset;
+		len = op->str_wr.data_len;
+		data = data_base + op->str_wr.data_off;
+
+		/* HW/EMUL specific */
+		if (unlikely((op_type > OP_WB) && (op_type == hw_wr)))
+			op_type = OP_WR;
+
+		switch (op_type) {
+		case OP_RD:
+			REG_RD(bp, addr);
+			break;
+		case OP_WR:
+			REG_WR(bp, addr, op->write.val);
+			break;
+		case OP_SW:
+			bnx2x_init_str_wr(bp, addr, data, len);
+			break;
+		case OP_WB:
+			bnx2x_init_wr_wb(bp, addr, data, len);
+			break;
+		case OP_SI:
+			bnx2x_init_ind_wr(bp, addr, data, len);
+			break;
+		case OP_ZR:
+			bnx2x_init_fill(bp, addr, 0, op->zero.len);
+			break;
+		case OP_ZP:
+			bnx2x_init_wr_zp(bp, addr, len,
+					 op->str_wr.data_off);
+			break;
+		case OP_WR_64:
+			bnx2x_init_wr_64(bp, addr, data, len);
+			break;
+		default:
+			/* happens whenever an op is of a diff HW */
+#if 0
+			DP(NETIF_MSG_HW, "skipping init operation  "
+			   "index %d[%d:%d]: type %d  addr 0x%x  "
+			   "len %d(0x%x)\n",
+			   i, op_start, op_end, op_type, addr, len, len);
+#endif
+			break;
+		}
+	}
+}
+
+/* PXP */
+static void bnx2x_init_pxp(struct bnx2x *bp)
+{
+	u16 devctl;
+	int r_order, w_order;
+	u32 val, i;
+
+	pci_read_config_word(bp->pdev,
+			     bp->pcie_cap + PCI_EXP_DEVCTL, &devctl);
+	DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl);
+	w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
+	if (bp->mrrs == -1)
+		r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12);
+	else {
+		DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs);
+		r_order = bp->mrrs;
+	}
+
+	if (r_order > MAX_RD_ORD) {
+		DP(NETIF_MSG_HW, "read order of %d  order adjusted to %d\n",
+		   r_order, MAX_RD_ORD);
+		r_order = MAX_RD_ORD;
+	}
+	if (w_order > MAX_WR_ORD) {
+		DP(NETIF_MSG_HW, "write order of %d  order adjusted to %d\n",
+		   w_order, MAX_WR_ORD);
+		w_order = MAX_WR_ORD;
+	}
+	if (CHIP_REV_IS_FPGA(bp)) {
+		DP(NETIF_MSG_HW, "write order adjusted to 1 for FPGA\n");
+		w_order = 0;
+	}
+	DP(NETIF_MSG_HW, "read order %d  write order %d\n", r_order, w_order);
+
+	for (i = 0; i < NUM_RD_Q-1; i++) {
+		REG_WR(bp, read_arb_addr[i].l, read_arb_data[i][r_order].l);
+		REG_WR(bp, read_arb_addr[i].add,
+		       read_arb_data[i][r_order].add);
+		REG_WR(bp, read_arb_addr[i].ubound,
+		       read_arb_data[i][r_order].ubound);
+	}
+
+	for (i = 0; i < NUM_WR_Q-1; i++) {
+		if ((write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L29) ||
+		    (write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L30)) {
+
+			REG_WR(bp, write_arb_addr[i].l,
+			       write_arb_data[i][w_order].l);
+
+			REG_WR(bp, write_arb_addr[i].add,
+			       write_arb_data[i][w_order].add);
+
+			REG_WR(bp, write_arb_addr[i].ubound,
+			       write_arb_data[i][w_order].ubound);
+		} else {
+
+			val = REG_RD(bp, write_arb_addr[i].l);
+			REG_WR(bp, write_arb_addr[i].l,
+			       val | (write_arb_data[i][w_order].l << 10));
+
+			val = REG_RD(bp, write_arb_addr[i].add);
+			REG_WR(bp, write_arb_addr[i].add,
+			       val | (write_arb_data[i][w_order].add << 10));
+
+			val = REG_RD(bp, write_arb_addr[i].ubound);
+			REG_WR(bp, write_arb_addr[i].ubound,
+			       val | (write_arb_data[i][w_order].ubound << 7));
+		}
+	}
+
+	val =  write_arb_data[NUM_WR_Q-1][w_order].add;
+	val += write_arb_data[NUM_WR_Q-1][w_order].ubound << 10;
+	val += write_arb_data[NUM_WR_Q-1][w_order].l << 17;
+	REG_WR(bp, PXP2_REG_PSWRQ_BW_RD, val);
+
+	val =  read_arb_data[NUM_RD_Q-1][r_order].add;
+	val += read_arb_data[NUM_RD_Q-1][r_order].ubound << 10;
+	val += read_arb_data[NUM_RD_Q-1][r_order].l << 17;
+	REG_WR(bp, PXP2_REG_PSWRQ_BW_WR, val);
+
+	REG_WR(bp, PXP2_REG_RQ_WR_MBS0, w_order);
+	REG_WR(bp, PXP2_REG_RQ_WR_MBS1, w_order);
+	REG_WR(bp, PXP2_REG_RQ_RD_MBS0, r_order);
+	REG_WR(bp, PXP2_REG_RQ_RD_MBS1, r_order);
+
+	if (r_order == MAX_RD_ORD)
+		REG_WR(bp, PXP2_REG_RQ_PDR_LIMIT, 0xe00);
+
+	REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order));
+
+	if (CHIP_IS_E1H(bp)) {
+		val = ((w_order == 0) ? 2 : 3);
+		REG_WR(bp, PXP2_REG_WR_HC_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_USDM_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_CSDM_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_TSDM_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_XSDM_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_QM_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_TM_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_SRC_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_DBG_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_DMAE_MPS, 2); /* DMAE is special */
+		REG_WR(bp, PXP2_REG_WR_CDU_MPS, val);
+	}
+}
+
+/*****************************************************************************
+ * Description:
+ *         Calculates crc 8 on a word value: polynomial 0-1-2-8
+ *         Code was translated from Verilog.
+ ****************************************************************************/
+static u8 calc_crc8(u32 data, u8 crc)
+{
+	u8 D[32];
+	u8 NewCRC[8];
+	u8 C[8];
+	u8 crc_res;
+	u8 i;
+
+	/* split the data into 31 bits */
+	for (i = 0; i < 32; i++) {
+		D[i] = data & 1;
+		data = data >> 1;
+	}
+
+	/* split the crc into 8 bits */
+	for (i = 0; i < 8; i++) {
+		C[i] = crc & 1;
+		crc = crc >> 1;
+	}
+
+	NewCRC[0] = D[31] ^ D[30] ^ D[28] ^ D[23] ^ D[21] ^ D[19] ^ D[18] ^
+		D[16] ^ D[14] ^ D[12] ^ D[8] ^ D[7] ^ D[6] ^ D[0] ^ C[4] ^
+		C[6] ^ C[7];
+	NewCRC[1] = D[30] ^ D[29] ^ D[28] ^ D[24] ^ D[23] ^ D[22] ^ D[21] ^
+		D[20] ^ D[18] ^ D[17] ^ D[16] ^ D[15] ^ D[14] ^ D[13] ^
+		D[12] ^ D[9] ^ D[6] ^ D[1] ^ D[0] ^ C[0] ^ C[4] ^ C[5] ^ C[6];
+	NewCRC[2] = D[29] ^ D[28] ^ D[25] ^ D[24] ^ D[22] ^ D[17] ^ D[15] ^
+		D[13] ^ D[12] ^ D[10] ^ D[8] ^ D[6] ^ D[2] ^ D[1] ^ D[0] ^
+		C[0] ^ C[1] ^ C[4] ^ C[5];
+	NewCRC[3] = D[30] ^ D[29] ^ D[26] ^ D[25] ^ D[23] ^ D[18] ^ D[16] ^
+		D[14] ^ D[13] ^ D[11] ^ D[9] ^ D[7] ^ D[3] ^ D[2] ^ D[1] ^
+		C[1] ^ C[2] ^ C[5] ^ C[6];
+	NewCRC[4] = D[31] ^ D[30] ^ D[27] ^ D[26] ^ D[24] ^ D[19] ^ D[17] ^
+		D[15] ^ D[14] ^ D[12] ^ D[10] ^ D[8] ^ D[4] ^ D[3] ^ D[2] ^
+		C[0] ^ C[2] ^ C[3] ^ C[6] ^ C[7];
+	NewCRC[5] = D[31] ^ D[28] ^ D[27] ^ D[25] ^ D[20] ^ D[18] ^ D[16] ^
+		D[15] ^ D[13] ^ D[11] ^ D[9] ^ D[5] ^ D[4] ^ D[3] ^ C[1] ^
+		C[3] ^ C[4] ^ C[7];
+	NewCRC[6] = D[29] ^ D[28] ^ D[26] ^ D[21] ^ D[19] ^ D[17] ^ D[16] ^
+		D[14] ^ D[12] ^ D[10] ^ D[6] ^ D[5] ^ D[4] ^ C[2] ^ C[4] ^
+		C[5];
+	NewCRC[7] = D[30] ^ D[29] ^ D[27] ^ D[22] ^ D[20] ^ D[18] ^ D[17] ^
+		D[15] ^ D[13] ^ D[11] ^ D[7] ^ D[6] ^ D[5] ^ C[3] ^ C[5] ^
+		C[6];
+
+	crc_res = 0;
+	for (i = 0; i < 8; i++)
+		crc_res |= (NewCRC[i] << i);
+
+	return crc_res;
+}
+
+#endif /* BNX2X_INIT_OPS_H */
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index ad5ef25add3e..cdc80e0820cd 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -53,12 +53,19 @@
 
 #include "bnx2x.h"
 #include "bnx2x_init.h"
+#include "bnx2x_init_ops.h"
 #include "bnx2x_dump.h"
 
 #define DRV_MODULE_VERSION	"1.48.105"
 #define DRV_MODULE_RELDATE	"2009/03/02"
 #define BNX2X_BC_VER		0x040200
 
+#include <linux/firmware.h>
+#include "bnx2x_fw_file_hdr.h"
+/* FW files */
+#define FW_FILE_PREFIX_E1		"bnx2x-e1-"
+#define FW_FILE_PREFIX_E1H		"bnx2x-e1h-"
+
 /* Time in jiffies before concluding the transmitter is hung */
 #define TX_TIMEOUT		(5*HZ)
 
@@ -5232,13 +5239,15 @@ static void bnx2x_gunzip_end(struct bnx2x *bp)
 	}
 }
 
-static int bnx2x_gunzip(struct bnx2x *bp, u8 *zbuf, int len)
+static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len)
 {
 	int n, rc;
 
 	/* check gzip header */
-	if ((zbuf[0] != 0x1f) || (zbuf[1] != 0x8b) || (zbuf[2] != Z_DEFLATED))
+	if ((zbuf[0] != 0x1f) || (zbuf[1] != 0x8b) || (zbuf[2] != Z_DEFLATED)) {
+		BNX2X_ERR("Bad gzip header\n");
 		return -EINVAL;
+	}
 
 	n = 10;
 
@@ -5247,7 +5256,7 @@ static int bnx2x_gunzip(struct bnx2x *bp, u8 *zbuf, int len)
 	if (zbuf[3] & FNAME)
 		while ((zbuf[n++] != 0) && (n < len));
 
-	bp->strm->next_in = zbuf + n;
+	bp->strm->next_in = (typeof(bp->strm->next_in))zbuf + n;
 	bp->strm->avail_in = len - n;
 	bp->strm->next_out = bp->gunzip_buf;
 	bp->strm->avail_out = FW_BUF_SIZE;
@@ -5369,8 +5378,8 @@ static int bnx2x_int_mem_test(struct bnx2x *bp)
 	msleep(50);
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03);
 	msleep(50);
-	bnx2x_init_block(bp, BRB1_COMMON_START, BRB1_COMMON_END);
-	bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END);
+	bnx2x_init_block(bp, BRB1_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, PRS_BLOCK, COMMON_STAGE);
 
 	DP(NETIF_MSG_HW, "part2\n");
 
@@ -5434,8 +5443,8 @@ static int bnx2x_int_mem_test(struct bnx2x *bp)
 	msleep(50);
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03);
 	msleep(50);
-	bnx2x_init_block(bp, BRB1_COMMON_START, BRB1_COMMON_END);
-	bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END);
+	bnx2x_init_block(bp, BRB1_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, PRS_BLOCK, COMMON_STAGE);
 #ifndef BCM_ISCSI
 	/* set NIC mode */
 	REG_WR(bp, PRS_REG_NIC_MODE, 1);
@@ -5510,7 +5519,7 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff);
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, 0xfffc);
 
-	bnx2x_init_block(bp, MISC_COMMON_START, MISC_COMMON_END);
+	bnx2x_init_block(bp, MISC_BLOCK, COMMON_STAGE);
 	if (CHIP_IS_E1H(bp))
 		REG_WR(bp, MISC_REG_E1HMF_MODE, IS_E1HMF(bp));
 
@@ -5518,14 +5527,14 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	msleep(30);
 	REG_WR(bp, MISC_REG_LCPLL_CTRL_REG_2, 0x0);
 
-	bnx2x_init_block(bp, PXP_COMMON_START, PXP_COMMON_END);
+	bnx2x_init_block(bp, PXP_BLOCK, COMMON_STAGE);
 	if (CHIP_IS_E1(bp)) {
 		/* enable HW interrupt from PXP on USDM overflow
 		   bit 16 on INT_MASK_0 */
 		REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0);
 	}
 
-	bnx2x_init_block(bp, PXP2_COMMON_START, PXP2_COMMON_END);
+	bnx2x_init_block(bp, PXP2_BLOCK, COMMON_STAGE);
 	bnx2x_init_pxp(bp);
 
 #ifdef __BIG_ENDIAN
@@ -5571,60 +5580,60 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	REG_WR(bp, PXP2_REG_RQ_DISABLE_INPUTS, 0);
 	REG_WR(bp, PXP2_REG_RD_DISABLE_INPUTS, 0);
 
-	bnx2x_init_block(bp, DMAE_COMMON_START, DMAE_COMMON_END);
+	bnx2x_init_block(bp, DMAE_BLOCK, COMMON_STAGE);
 
 	/* clean the DMAE memory */
 	bp->dmae_ready = 1;
 	bnx2x_init_fill(bp, TSEM_REG_PRAM, 0, 8);
 
-	bnx2x_init_block(bp, TCM_COMMON_START, TCM_COMMON_END);
-	bnx2x_init_block(bp, UCM_COMMON_START, UCM_COMMON_END);
-	bnx2x_init_block(bp, CCM_COMMON_START, CCM_COMMON_END);
-	bnx2x_init_block(bp, XCM_COMMON_START, XCM_COMMON_END);
+	bnx2x_init_block(bp, TCM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, UCM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, CCM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, XCM_BLOCK, COMMON_STAGE);
 
 	bnx2x_read_dmae(bp, XSEM_REG_PASSIVE_BUFFER, 3);
 	bnx2x_read_dmae(bp, CSEM_REG_PASSIVE_BUFFER, 3);
 	bnx2x_read_dmae(bp, TSEM_REG_PASSIVE_BUFFER, 3);
 	bnx2x_read_dmae(bp, USEM_REG_PASSIVE_BUFFER, 3);
 
-	bnx2x_init_block(bp, QM_COMMON_START, QM_COMMON_END);
+	bnx2x_init_block(bp, QM_BLOCK, COMMON_STAGE);
 	/* soft reset pulse */
 	REG_WR(bp, QM_REG_SOFT_RESET, 1);
 	REG_WR(bp, QM_REG_SOFT_RESET, 0);
 
 #ifdef BCM_ISCSI
-	bnx2x_init_block(bp, TIMERS_COMMON_START, TIMERS_COMMON_END);
+	bnx2x_init_block(bp, TIMERS_BLOCK, COMMON_STAGE);
 #endif
 
-	bnx2x_init_block(bp, DQ_COMMON_START, DQ_COMMON_END);
+	bnx2x_init_block(bp, DQ_BLOCK, COMMON_STAGE);
 	REG_WR(bp, DORQ_REG_DPM_CID_OFST, BCM_PAGE_SHIFT);
 	if (!CHIP_REV_IS_SLOW(bp)) {
 		/* enable hw interrupt from doorbell Q */
 		REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0);
 	}
 
-	bnx2x_init_block(bp, BRB1_COMMON_START, BRB1_COMMON_END);
-	bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END);
+	bnx2x_init_block(bp, BRB1_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, PRS_BLOCK, COMMON_STAGE);
 	REG_WR(bp, PRS_REG_A_PRSU_20, 0xf);
 	/* set NIC mode */
 	REG_WR(bp, PRS_REG_NIC_MODE, 1);
 	if (CHIP_IS_E1H(bp))
 		REG_WR(bp, PRS_REG_E1HOV_MODE, IS_E1HMF(bp));
 
-	bnx2x_init_block(bp, TSDM_COMMON_START, TSDM_COMMON_END);
-	bnx2x_init_block(bp, CSDM_COMMON_START, CSDM_COMMON_END);
-	bnx2x_init_block(bp, USDM_COMMON_START, USDM_COMMON_END);
-	bnx2x_init_block(bp, XSDM_COMMON_START, XSDM_COMMON_END);
+	bnx2x_init_block(bp, TSDM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, CSDM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, USDM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, XSDM_BLOCK, COMMON_STAGE);
 
 	bnx2x_init_fill(bp, TSTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp));
 	bnx2x_init_fill(bp, USTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp));
 	bnx2x_init_fill(bp, CSTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp));
 	bnx2x_init_fill(bp, XSTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp));
 
-	bnx2x_init_block(bp, TSEM_COMMON_START, TSEM_COMMON_END);
-	bnx2x_init_block(bp, USEM_COMMON_START, USEM_COMMON_END);
-	bnx2x_init_block(bp, CSEM_COMMON_START, CSEM_COMMON_END);
-	bnx2x_init_block(bp, XSEM_COMMON_START, XSEM_COMMON_END);
+	bnx2x_init_block(bp, TSEM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, USEM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, CSEM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, XSEM_BLOCK, COMMON_STAGE);
 
 	/* sync semi rtc */
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
@@ -5632,16 +5641,16 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
 	       0x80000000);
 
-	bnx2x_init_block(bp, UPB_COMMON_START, UPB_COMMON_END);
-	bnx2x_init_block(bp, XPB_COMMON_START, XPB_COMMON_END);
-	bnx2x_init_block(bp, PBF_COMMON_START, PBF_COMMON_END);
+	bnx2x_init_block(bp, UPB_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, XPB_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, PBF_BLOCK, COMMON_STAGE);
 
 	REG_WR(bp, SRC_REG_SOFT_RST, 1);
 	for (i = SRC_REG_KEYRSS0_0; i <= SRC_REG_KEYRSS1_9; i += 4) {
 		REG_WR(bp, i, 0xc0cac01a);
 		/* TODO: replace with something meaningful */
 	}
-	bnx2x_init_block(bp, SRCH_COMMON_START, SRCH_COMMON_END);
+	bnx2x_init_block(bp, SRCH_BLOCK, COMMON_STAGE);
 	REG_WR(bp, SRC_REG_SOFT_RST, 0);
 
 	if (sizeof(union cdu_context) != 1024)
@@ -5649,7 +5658,7 @@ static int bnx2x_init_common(struct bnx2x *bp)
 		printk(KERN_ALERT PFX "please adjust the size of"
 		       " cdu_context(%ld)\n", (long)sizeof(union cdu_context));
 
-	bnx2x_init_block(bp, CDU_COMMON_START, CDU_COMMON_END);
+	bnx2x_init_block(bp, CDU_BLOCK, COMMON_STAGE);
 	val = (4 << 24) + (0 << 12) + 1024;
 	REG_WR(bp, CDU_REG_CDU_GLOBAL_PARAMS, val);
 	if (CHIP_IS_E1(bp)) {
@@ -5658,7 +5667,7 @@ static int bnx2x_init_common(struct bnx2x *bp)
 		REG_WR(bp, CDU_REG_CDU_DEBUG, 0);
 	}
 
-	bnx2x_init_block(bp, CFC_COMMON_START, CFC_COMMON_END);
+	bnx2x_init_block(bp, CFC_BLOCK, COMMON_STAGE);
 	REG_WR(bp, CFC_REG_INIT_REG, 0x7FF);
 	/* enable context validation interrupt from CFC */
 	REG_WR(bp, CFC_REG_CFC_INT_MASK, 0);
@@ -5666,20 +5675,25 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	/* set the thresholds to prevent CFC/CDU race */
 	REG_WR(bp, CFC_REG_DEBUG0, 0x20020000);
 
-	bnx2x_init_block(bp, HC_COMMON_START, HC_COMMON_END);
-	bnx2x_init_block(bp, MISC_AEU_COMMON_START, MISC_AEU_COMMON_END);
+	bnx2x_init_block(bp, HC_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, MISC_AEU_BLOCK, COMMON_STAGE);
 
 	/* PXPCS COMMON comes here */
+	bnx2x_init_block(bp, PXPCS_BLOCK, COMMON_STAGE);
 	/* Reset PCIE errors for debug */
 	REG_WR(bp, 0x2814, 0xffffffff);
 	REG_WR(bp, 0x3820, 0xffffffff);
 
 	/* EMAC0 COMMON comes here */
+	bnx2x_init_block(bp, EMAC0_BLOCK, COMMON_STAGE);
 	/* EMAC1 COMMON comes here */
+	bnx2x_init_block(bp, EMAC1_BLOCK, COMMON_STAGE);
 	/* DBU COMMON comes here */
+	bnx2x_init_block(bp, DBU_BLOCK, COMMON_STAGE);
 	/* DBG COMMON comes here */
+	bnx2x_init_block(bp, DBG_BLOCK, COMMON_STAGE);
 
-	bnx2x_init_block(bp, NIG_COMMON_START, NIG_COMMON_END);
+	bnx2x_init_block(bp, NIG_BLOCK, COMMON_STAGE);
 	if (CHIP_IS_E1H(bp)) {
 		REG_WR(bp, NIG_REG_LLH_MF_MODE, IS_E1HMF(bp));
 		REG_WR(bp, NIG_REG_LLH_E1HOV_MODE, IS_E1HMF(bp));
@@ -5763,6 +5777,7 @@ static int bnx2x_init_common(struct bnx2x *bp)
 static int bnx2x_init_port(struct bnx2x *bp)
 {
 	int port = BP_PORT(bp);
+	int init_stage = port ? PORT1_STAGE : PORT0_STAGE;
 	u32 low, high;
 	u32 val;
 
@@ -5771,7 +5786,9 @@ static int bnx2x_init_port(struct bnx2x *bp)
 	REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0);
 
 	/* Port PXP comes here */
+	bnx2x_init_block(bp, PXP_BLOCK, init_stage);
 	/* Port PXP2 comes here */
+	bnx2x_init_block(bp, PXP2_BLOCK, init_stage);
 #ifdef BCM_ISCSI
 	/* Port0  1
 	 * Port1  385 */
@@ -5798,21 +5815,19 @@ static int bnx2x_init_port(struct bnx2x *bp)
 	REG_WR(bp, PXP2_REG_PSWRQ_SRC0_L2P + func*4, PXP_ONE_ILT(i));
 #endif
 	/* Port CMs come here */
-	bnx2x_init_block(bp, (port ? XCM_PORT1_START : XCM_PORT0_START),
-			     (port ? XCM_PORT1_END : XCM_PORT0_END));
+	bnx2x_init_block(bp, XCM_BLOCK, init_stage);
 
 	/* Port QM comes here */
 #ifdef BCM_ISCSI
 	REG_WR(bp, TM_REG_LIN0_SCAN_TIME + func*4, 1024/64*20);
 	REG_WR(bp, TM_REG_LIN0_MAX_ACTIVE_CID + func*4, 31);
 
-	bnx2x_init_block(bp, func ? TIMERS_PORT1_START : TIMERS_PORT0_START,
-			     func ? TIMERS_PORT1_END : TIMERS_PORT0_END);
+	bnx2x_init_block(bp, TIMERS_BLOCK, init_stage);
 #endif
 	/* Port DQ comes here */
+	bnx2x_init_block(bp, DQ_BLOCK, init_stage);
 
-	bnx2x_init_block(bp, (port ? BRB1_PORT1_START : BRB1_PORT0_START),
-			     (port ? BRB1_PORT1_END : BRB1_PORT0_END));
+	bnx2x_init_block(bp, BRB1_BLOCK, init_stage);
 	if (CHIP_REV_IS_SLOW(bp) && !CHIP_IS_E1H(bp)) {
 		/* no pause for emulation and FPGA */
 		low = 0;
@@ -5837,25 +5852,27 @@ static int bnx2x_init_port(struct bnx2x *bp)
 
 
 	/* Port PRS comes here */
+	bnx2x_init_block(bp, PRS_BLOCK, init_stage);
 	/* Port TSDM comes here */
+	bnx2x_init_block(bp, TSDM_BLOCK, init_stage);
 	/* Port CSDM comes here */
+	bnx2x_init_block(bp, CSDM_BLOCK, init_stage);
 	/* Port USDM comes here */
+	bnx2x_init_block(bp, USDM_BLOCK, init_stage);
 	/* Port XSDM comes here */
+	bnx2x_init_block(bp, XSDM_BLOCK, init_stage);
 
-	bnx2x_init_block(bp, port ? TSEM_PORT1_START : TSEM_PORT0_START,
-			     port ? TSEM_PORT1_END : TSEM_PORT0_END);
-	bnx2x_init_block(bp, port ? USEM_PORT1_START : USEM_PORT0_START,
-			     port ? USEM_PORT1_END : USEM_PORT0_END);
-	bnx2x_init_block(bp, port ? CSEM_PORT1_START : CSEM_PORT0_START,
-			     port ? CSEM_PORT1_END : CSEM_PORT0_END);
-	bnx2x_init_block(bp, port ? XSEM_PORT1_START : XSEM_PORT0_START,
-			     port ? XSEM_PORT1_END : XSEM_PORT0_END);
+	bnx2x_init_block(bp, TSEM_BLOCK, init_stage);
+	bnx2x_init_block(bp, USEM_BLOCK, init_stage);
+	bnx2x_init_block(bp, CSEM_BLOCK, init_stage);
+	bnx2x_init_block(bp, XSEM_BLOCK, init_stage);
 
 	/* Port UPB comes here */
+	bnx2x_init_block(bp, UPB_BLOCK, init_stage);
 	/* Port XPB comes here */
+	bnx2x_init_block(bp, XPB_BLOCK, init_stage);
 
-	bnx2x_init_block(bp, port ? PBF_PORT1_START : PBF_PORT0_START,
-			     port ? PBF_PORT1_END : PBF_PORT0_END);
+	bnx2x_init_block(bp, PBF_BLOCK, init_stage);
 
 	/* configure PBF to work without PAUSE mtu 9000 */
 	REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0);
@@ -5885,18 +5902,17 @@ static int bnx2x_init_port(struct bnx2x *bp)
 	/* Port SRCH comes here */
 #endif
 	/* Port CDU comes here */
+	bnx2x_init_block(bp, CDU_BLOCK, init_stage);
 	/* Port CFC comes here */
+	bnx2x_init_block(bp, CFC_BLOCK, init_stage);
 
 	if (CHIP_IS_E1(bp)) {
 		REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
 		REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
 	}
-	bnx2x_init_block(bp, port ? HC_PORT1_START : HC_PORT0_START,
-			     port ? HC_PORT1_END : HC_PORT0_END);
+	bnx2x_init_block(bp, HC_BLOCK, init_stage);
 
-	bnx2x_init_block(bp, port ? MISC_AEU_PORT1_START :
-				    MISC_AEU_PORT0_START,
-			     port ? MISC_AEU_PORT1_END : MISC_AEU_PORT0_END);
+	bnx2x_init_block(bp, MISC_AEU_BLOCK, init_stage);
 	/* init aeu_mask_attn_func_0/1:
 	 *  - SF mode: bits 3-7 are masked. only bits 0-2 are in use
 	 *  - MF mode: bit 3 is masked. bits 0-2 are in use as in SF
@@ -5905,13 +5921,17 @@ static int bnx2x_init_port(struct bnx2x *bp)
 	       (IS_E1HMF(bp) ? 0xF7 : 0x7));
 
 	/* Port PXPCS comes here */
+	bnx2x_init_block(bp, PXPCS_BLOCK, init_stage);
 	/* Port EMAC0 comes here */
+	bnx2x_init_block(bp, EMAC0_BLOCK, init_stage);
 	/* Port EMAC1 comes here */
+	bnx2x_init_block(bp, EMAC1_BLOCK, init_stage);
 	/* Port DBU comes here */
+	bnx2x_init_block(bp, DBU_BLOCK, init_stage);
 	/* Port DBG comes here */
+	bnx2x_init_block(bp, DBG_BLOCK, init_stage);
 
-	bnx2x_init_block(bp, port ? NIG_PORT1_START : NIG_PORT0_START,
-			     port ? NIG_PORT1_END : NIG_PORT0_END);
+	bnx2x_init_block(bp, NIG_BLOCK, init_stage);
 
 	REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1);
 
@@ -5931,7 +5951,9 @@ static int bnx2x_init_port(struct bnx2x *bp)
 	}
 
 	/* Port MCP comes here */
+	bnx2x_init_block(bp, MCP_BLOCK, init_stage);
 	/* Port DMAE comes here */
+	bnx2x_init_block(bp, DMAE_BLOCK, init_stage);
 
 	switch (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config)) {
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
@@ -6036,7 +6058,7 @@ static int bnx2x_init_func(struct bnx2x *bp)
 	if (CHIP_IS_E1H(bp)) {
 		for (i = 0; i < 9; i++)
 			bnx2x_init_block(bp,
-					 cm_start[func][i], cm_end[func][i]);
+					 cm_blocks[i], FUNC0_STAGE + func);
 
 		REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 1);
 		REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + port*8, bp->e1hov);
@@ -6049,7 +6071,7 @@ static int bnx2x_init_func(struct bnx2x *bp)
 		REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
 		REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
 	}
-	bnx2x_init_block(bp, hc_limits[func][0], hc_limits[func][1]);
+	bnx2x_init_block(bp, HC_BLOCK, FUNC0_STAGE + func);
 
 	/* Reset PCIE errors for debug */
 	REG_WR(bp, 0x2114, 0xffffffff);
@@ -11082,6 +11104,190 @@ static int __devinit bnx2x_get_pcie_speed(struct bnx2x *bp)
 	val = (val & PCICFG_LINK_SPEED) >> PCICFG_LINK_SPEED_SHIFT;
 	return val;
 }
+static int __devinit bnx2x_check_firmware(struct bnx2x *bp)
+{
+	struct bnx2x_fw_file_hdr *fw_hdr;
+	struct bnx2x_fw_file_section *sections;
+	u16 *ops_offsets;
+	u32 offset, len, num_ops;
+	int i;
+	const struct firmware *firmware = bp->firmware;
+	const u8 * fw_ver;
+
+	if (firmware->size < sizeof(struct bnx2x_fw_file_hdr))
+		return -EINVAL;
+
+	fw_hdr = (struct bnx2x_fw_file_hdr *)firmware->data;
+	sections = (struct bnx2x_fw_file_section *)fw_hdr;
+
+	/* Make sure none of the offsets and sizes make us read beyond
+	 * the end of the firmware data */
+	for (i = 0; i < sizeof(*fw_hdr) / sizeof(*sections); i++) {
+		offset = be32_to_cpu(sections[i].offset);
+		len = be32_to_cpu(sections[i].len);
+		if (offset + len > firmware->size) {
+			printk(KERN_ERR PFX "Section %d length is out of bounds\n", i);
+			return -EINVAL;
+		}
+	}
+
+	/* Likewise for the init_ops offsets */
+	offset = be32_to_cpu(fw_hdr->init_ops_offsets.offset);
+	ops_offsets = (u16 *)(firmware->data + offset);
+	num_ops = be32_to_cpu(fw_hdr->init_ops.len) / sizeof(struct raw_op);
+
+	for (i = 0; i < be32_to_cpu(fw_hdr->init_ops_offsets.len) / 2; i++) {
+		if (be16_to_cpu(ops_offsets[i]) > num_ops) {
+			printk(KERN_ERR PFX "Section offset %d is out of bounds\n", i);
+			return -EINVAL;
+		}
+	}
+
+	/* Check FW version */
+	offset = be32_to_cpu(fw_hdr->fw_version.offset);
+	fw_ver = firmware->data + offset;
+	if ((fw_ver[0] != BCM_5710_FW_MAJOR_VERSION) ||
+	    (fw_ver[1] != BCM_5710_FW_MINOR_VERSION) ||
+	    (fw_ver[2] != BCM_5710_FW_REVISION_VERSION) ||
+	    (fw_ver[3] != BCM_5710_FW_ENGINEERING_VERSION)) {
+		printk(KERN_ERR PFX "Bad FW version:%d.%d.%d.%d."
+				    " Should be %d.%d.%d.%d\n",
+		       fw_ver[0], fw_ver[1], fw_ver[2],
+		       fw_ver[3], BCM_5710_FW_MAJOR_VERSION,
+		       BCM_5710_FW_MINOR_VERSION,
+		       BCM_5710_FW_REVISION_VERSION,
+		       BCM_5710_FW_ENGINEERING_VERSION);
+                return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void inline be32_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
+{
+	u32 i;
+	const __be32 *source = (const __be32*)_source;
+	u32 *target = (u32*)_target;
+
+	for (i = 0; i < n/4; i++)
+		target[i] = be32_to_cpu(source[i]);
+}
+
+/*
+   Ops array is stored in the following format:
+   {op(8bit), offset(24bit, big endian), data(32bit, big endian)}
+ */
+static void inline bnx2x_prep_ops(const u8 *_source, u8 *_target, u32 n)
+{
+	u32 i, j, tmp;
+	const __be32 *source = (const __be32*)_source;
+	struct raw_op *target = (struct raw_op*)_target;
+
+	for (i = 0, j = 0; i < n/8; i++, j+=2) {
+		tmp = be32_to_cpu(source[j]);
+		target[i].op = (tmp >> 24) & 0xff;
+		target[i].offset =  tmp & 0xffffff;
+		target[i].raw_data = be32_to_cpu(source[j+1]);
+	}
+}
+static void inline be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
+{
+	u32 i;
+	u16 *target = (u16*)_target;
+	const __be16 *source = (const __be16*)_source;
+
+	for (i = 0; i < n/2; i++)
+		target[i] = be16_to_cpu(source[i]);
+}
+
+#define BNX2X_ALLOC_AND_SET(arr, lbl, func) \
+	do {   \
+		u32 len = be32_to_cpu(fw_hdr->arr.len);   \
+		bp->arr = kmalloc(len, GFP_KERNEL);  \
+		if (!bp->arr) { \
+			printk(KERN_ERR PFX "Failed to allocate %d bytes for "#arr"\n", len); \
+			goto lbl; \
+		} \
+		func(bp->firmware->data + \
+			be32_to_cpu(fw_hdr->arr.offset), \
+			(u8*)bp->arr, len); \
+	} while (0)
+
+
+static int __devinit bnx2x_init_firmware(struct bnx2x *bp, struct device *dev)
+{
+	char fw_file_name[40] = {0};
+        int rc, offset;
+	struct bnx2x_fw_file_hdr *fw_hdr;
+
+	/* Create a FW file name */
+	if (CHIP_IS_E1(bp))
+                offset = sprintf(fw_file_name, FW_FILE_PREFIX_E1);
+	else
+		offset = sprintf(fw_file_name, FW_FILE_PREFIX_E1H);
+
+	sprintf(fw_file_name + offset, "%d.%d.%d.%d.fw",
+		BCM_5710_FW_MAJOR_VERSION,
+                BCM_5710_FW_MINOR_VERSION,
+                BCM_5710_FW_REVISION_VERSION,
+                BCM_5710_FW_ENGINEERING_VERSION);
+
+	printk(KERN_INFO PFX "Loading %s\n", fw_file_name);
+
+	rc = request_firmware(&bp->firmware, fw_file_name, dev);
+	if (rc) {
+		printk(KERN_ERR PFX "Can't load firmware file %s\n", fw_file_name);
+		goto request_firmware_exit;
+	}
+
+	rc = bnx2x_check_firmware(bp);
+	if (rc) {
+		printk(KERN_ERR PFX "Corrupt firmware file %s\n", fw_file_name);
+		goto request_firmware_exit;
+	}
+
+	fw_hdr = (struct bnx2x_fw_file_hdr *)bp->firmware->data;
+
+	/* Initialize the pointers to the init arrays */
+	/* Blob */
+	BNX2X_ALLOC_AND_SET(init_data, request_firmware_exit, be32_to_cpu_n);
+
+	/* Opcodes */
+	BNX2X_ALLOC_AND_SET(init_ops, init_ops_alloc_err, bnx2x_prep_ops);
+
+	/* Offsets */
+	BNX2X_ALLOC_AND_SET(init_ops_offsets, init_offsets_alloc_err, be16_to_cpu_n);
+
+	/* STORMs firmware */
+	bp->tsem_int_table_data = bp->firmware->data +
+		be32_to_cpu(fw_hdr->tsem_int_table_data.offset);
+	bp->tsem_pram_data      = bp->firmware->data +
+		be32_to_cpu(fw_hdr->tsem_pram_data.offset);
+	bp->usem_int_table_data = bp->firmware->data +
+		be32_to_cpu(fw_hdr->usem_int_table_data.offset);
+	bp->usem_pram_data      = bp->firmware->data +
+		be32_to_cpu(fw_hdr->usem_pram_data.offset);
+	bp->xsem_int_table_data = bp->firmware->data +
+		be32_to_cpu(fw_hdr->xsem_int_table_data.offset);
+	bp->xsem_pram_data      = bp->firmware->data +
+		be32_to_cpu(fw_hdr->xsem_pram_data.offset);
+	bp->csem_int_table_data = bp->firmware->data +
+		be32_to_cpu(fw_hdr->csem_int_table_data.offset);
+	bp->csem_pram_data      = bp->firmware->data +
+		be32_to_cpu(fw_hdr->csem_pram_data.offset);
+
+	return 0;
+init_offsets_alloc_err:
+	kfree(bp->init_ops);
+init_ops_alloc_err:
+	kfree(bp->init_data);
+request_firmware_exit:
+	release_firmware(bp->firmware);
+
+	return rc;
+}
+
+
 
 static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 				    const struct pci_device_id *ent)
@@ -11116,6 +11322,13 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 	if (rc)
 		goto init_one_exit;
 
+	/* Set init arrays */
+	rc = bnx2x_init_firmware(bp, &pdev->dev);
+	if (rc) {
+		printk(KERN_ERR PFX "Error loading firmware\n");
+		goto init_one_exit;
+	}
+
 	rc = register_netdev(dev);
 	if (rc) {
 		dev_err(&pdev->dev, "Cannot register net device\n");
@@ -11163,6 +11376,11 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev)
 
 	unregister_netdev(dev);
 
+	kfree(bp->init_ops_offsets);
+	kfree(bp->init_ops);
+	kfree(bp->init_data);
+	release_firmware(bp->firmware);
+
 	if (bp->regview)
 		iounmap(bp->regview);
 
@@ -11431,3 +11649,4 @@ static void __exit bnx2x_cleanup(void)
 module_init(bnx2x_init);
 module_exit(bnx2x_cleanup);
 
+
diff --git a/firmware/Makefile b/firmware/Makefile
index 25200d106ee8..1c670e0c0448 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -32,6 +32,7 @@ fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \
 					 adaptec/starfire_tx.bin
 fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
 fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
+fw-shipped-$(CONFIG_BNX2X) += bnx2x-e1-4.8.53.0.fw bnx2x-e1h-4.8.53.0.fw
 fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-4.6.17.fw \
 			     bnx2/bnx2-rv2p-09-4.6.15.fw \
 			     bnx2/bnx2-mips-06-4.6.16.fw \
diff --git a/firmware/WHENCE b/firmware/WHENCE
index 4c52984a8319..c1e9c5ab694c 100644
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@ -618,6 +618,26 @@ Found in hex form in kernel source.
 
 --------------------------------------------------------------------------
 
+Driver: bnx2x: Broadcom Everest
+
+File: bnx2x-e1-4.8.53.0.fw.ihex
+File: bnx2x-e1h-4.8.53.0.fw.ihex
+
+License:
+  Copyright (c) 2007-2009 Broadcom Corporation
+
+  This file contains firmware data derived from proprietary unpublished
+  source code, Copyright (c) 2007-2009 Broadcom Corporation.
+
+  Permission is hereby granted for the distribution of this firmware data
+  in hexadecimal or equivalent format, provided this copyright notice is
+  accompanying it.
+
+
+Found in hex form in kernel source.
+
+--------------------------------------------------------------------------
+
 Driver: BNX2 - Broadcom NetXtremeII
 
 File: bnx2/bnx2-mips-06-4.6.16.fw