diff options
author | Sonic Zhang <sonic.zhang@analog.com> | 2015-04-09 05:13:07 +0200 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2015-05-06 14:45:19 +0200 |
commit | fa76a3db7093a527333c380df82a0f158d9b8299 (patch) | |
tree | add57323d26140a8e2358da9b93066d096c9c38d | |
parent | pinctrl: add imx7d support (diff) | |
download | linux-fa76a3db7093a527333c380df82a0f158d9b8299.tar.xz linux-fa76a3db7093a527333c380df82a0f158d9b8299.zip |
pinctrl: allow exlusive GPIO/mux pin allocation
Disallow simultaneous use of the the GPIO and peripheral mux
functions by setting a flag "strict" in struct pinctrl_desc.
The blackfin pinmux and gpio controller doesn't allow user to
set up a pin for both GPIO and peripheral function. So, add flag
strict in struct pinctrl_desc to check both gpio_owner and
mux_owner before approving the pin request.
v2-changes:
- if strict flag is set, check gpio_owner and mux_onwer in if and
else clause
v3-changes:
- add kerneldoc for this struct
- augment Documentation/pinctrl.txt
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-rw-r--r-- | Documentation/pinctrl.txt | 11 | ||||
-rw-r--r-- | drivers/pinctrl/pinctrl-adi2.c | 1 | ||||
-rw-r--r-- | drivers/pinctrl/pinmux.c | 13 | ||||
-rw-r--r-- | include/linux/pinctrl/pinctrl.h | 3 |
4 files changed, 28 insertions, 0 deletions
diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index a9b47163bb5d..d6b2bed94c43 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -73,6 +73,7 @@ static struct pinctrl_desc foo_desc = { .pins = foo_pins, .npins = ARRAY_SIZE(foo_pins), .owner = THIS_MODULE, + .strict = true, }; int __init foo_probe(void) @@ -830,6 +831,11 @@ separate memory range only intended for GPIO driving, and the register range dealing with pin config and pin multiplexing get placed into a different memory range and a separate section of the data sheet. +A flag "strict" in struct pinctrl_desc is available to check and deny +simultaneous access to the same pin from GPIO and pin multiplexing +consumers on hardware of this type. The pinctrl driver should set this flag +accordingly. + (B) pin config @@ -850,6 +856,11 @@ possible that the GPIO, pin config and pin multiplex registers are placed into the same memory range and the same section of the data sheet, although that need not be the case. +In some pin controllers, although the physical pins are designed in the same +way as (B), the GPIO function still can't be enabled at the same time as the +peripheral functions. So again the "strict" flag should be set, denying +simultaneous activation by GPIO and other muxed in devices. + From a kernel point of view, however, these are different aspects of the hardware and shall be put into different subsystems: diff --git a/drivers/pinctrl/pinctrl-adi2.c b/drivers/pinctrl/pinctrl-adi2.c index 8434439c5017..fbd492668da1 100644 --- a/drivers/pinctrl/pinctrl-adi2.c +++ b/drivers/pinctrl/pinctrl-adi2.c @@ -710,6 +710,7 @@ static struct pinctrl_desc adi_pinmux_desc = { .name = DRIVER_NAME, .pctlops = &adi_pctrl_ops, .pmxops = &adi_pinmux_ops, + .strict = true, .owner = THIS_MODULE, }; diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c index b874458dcb88..2546fa783464 100644 --- a/drivers/pinctrl/pinmux.c +++ b/drivers/pinctrl/pinmux.c @@ -107,6 +107,13 @@ static int pin_request(struct pinctrl_dev *pctldev, desc->name, desc->gpio_owner, owner); goto out; } + if (pctldev->desc->strict && desc->mux_usecount && + strcmp(desc->mux_owner, owner)) { + dev_err(pctldev->dev, + "pin %s already requested by %s; cannot claim for %s\n", + desc->name, desc->mux_owner, owner); + goto out; + } desc->gpio_owner = owner; } else { @@ -116,6 +123,12 @@ static int pin_request(struct pinctrl_dev *pctldev, desc->name, desc->mux_owner, owner); goto out; } + if (pctldev->desc->strict && desc->gpio_owner) { + dev_err(pctldev->dev, + "pin %s already requested by %s; cannot claim for %s\n", + desc->name, desc->gpio_owner, owner); + goto out; + } desc->mux_usecount++; if (desc->mux_usecount > 1) diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h index 66e4697516de..fc6b0348c375 100644 --- a/include/linux/pinctrl/pinctrl.h +++ b/include/linux/pinctrl/pinctrl.h @@ -114,6 +114,8 @@ struct pinctrl_ops { * of the pins field above * @pctlops: pin control operation vtable, to support global concepts like * grouping of pins, this is optional. + * @strict: check both gpio_owner and mux_owner strictly before approving + the pin request * @pmxops: pinmux operations vtable, if you support pinmuxing in your driver * @confops: pin config operations vtable, if you support pin configuration in * your driver @@ -132,6 +134,7 @@ struct pinctrl_desc { const struct pinctrl_ops *pctlops; const struct pinmux_ops *pmxops; const struct pinconf_ops *confops; + bool strict; struct module *owner; #ifdef CONFIG_GENERIC_PINCONF unsigned int num_custom_params; |