summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-08-30 19:53:12 +0200
committerLinus Torvalds <torvalds@linux-foundation.org>2019-08-30 19:53:12 +0200
commite8d6766f3cc8318e8fcaa5ef2d1af4d2d9903af3 (patch)
tree2227e9c3bfbcb98737d567c4dd0fd2fb0915471e
parentMerge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma (diff)
parentsoc: ixp4xx: Protect IXP4xx SoC drivers by ARCH_IXP4XX || COMPILE_TEST (diff)
downloadlinux-e8d6766f3cc8318e8fcaa5ef2d1af4d2d9903af3.tar.xz
linux-e8d6766f3cc8318e8fcaa5ef2d1af4d2d9903af3.zip
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann: "The majority of the fixes this time are for OMAP hardware, here is a breakdown of the significant changes: Various device tree bug fixes: - TI am57xx boards need a voltage level fix to avoid damaging SD cards - vf610-bk4 fails to detect its flash due to an incorrect description - meson-g12a USB phy configuration fails - meson-g12b reboot should not power off the SD card - Some corrections for apparently harmless differences from the documentation. Regression fixes: - ams-delta FIQ interrupts broke in 5.3 - TI am3/am4 mmc controllers broke in 5.2 The logic_pio driver (used on some Huawei ARM servers) got a few bug fixes for reliability. And a couple of compile-time warning fixes" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits) soc: ixp4xx: Protect IXP4xx SoC drivers by ARCH_IXP4XX || COMPILE_TEST soc: ti: pm33xx: Make two symbols static soc: ti: pm33xx: Fix static checker warnings ARM: OMAP: dma: Mark expected switch fall-throughs ARM: dts: Fix incomplete dts data for am3 and am4 mmc bus: ti-sysc: Simplify cleanup upon failures in sysc_probe() ARM: OMAP1: ams-delta-fiq: Fix missing irq_ack ARM: dts: dra74x: Fix iodelay configuration for mmc3 ARM: dts: am335x: Fix UARTs length ARM: OMAP2+: Fix omap4 errata warning on other SoCs bus: hisi_lpc: Add .remove method to avoid driver unbind crash bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free lib: logic_pio: Add logic_pio_unregister_range() lib: logic_pio: Avoid possible overlap for unregistering regions lib: logic_pio: Fix RCU usage arm64: dts: amlogic: odroid-n2: keep SD card regulator always on arm64: dts: meson-g12a-sei510: enable IR controller arm64: dts: meson-g12a: add missing dwc2 phy-names ARM: dts: vf610-bk4: Fix qspi node description ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7 ...
-rw-r--r--.mailmap2
-rw-r--r--MAINTAINERS10
-rw-r--r--arch/arm/boot/dts/am33xx-l4.dtsi16
-rw-r--r--arch/arm/boot/dts/am33xx.dtsi32
-rw-r--r--arch/arm/boot/dts/am4372.dtsi32
-rw-r--r--arch/arm/boot/dts/am437x-l4.dtsi4
-rw-r--r--arch/arm/boot/dts/am571x-idk.dts7
-rw-r--r--arch/arm/boot/dts/am572x-idk.dts7
-rw-r--r--arch/arm/boot/dts/am574x-idk.dts7
-rw-r--r--arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi3
-rw-r--r--arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts7
-rw-r--r--arch/arm/boot/dts/am57xx-beagle-x15-revc.dts7
-rw-r--r--arch/arm/boot/dts/dra7-evm.dts2
-rw-r--r--arch/arm/boot/dts/dra7-l4.dtsi6
-rw-r--r--arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi50
-rw-r--r--arch/arm/boot/dts/vf610-bk4.dts4
-rw-r--r--arch/arm/mach-omap1/ams-delta-fiq-handler.S3
-rw-r--r--arch/arm/mach-omap1/ams-delta-fiq.c4
-rw-r--r--arch/arm/mach-omap2/omap4-common.c3
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_7xx_data.c3
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts6
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12a.dtsi1
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts1
-rw-r--r--drivers/bus/hisi_lpc.c47
-rw-r--r--drivers/bus/ti-sysc.c24
-rw-r--r--drivers/soc/ixp4xx/Kconfig4
-rw-r--r--drivers/soc/ti/pm33xx.c19
-rw-r--r--include/linux/logic_pio.h1
-rw-r--r--lib/logic_pio.c73
29 files changed, 250 insertions, 135 deletions
diff --git a/.mailmap b/.mailmap
index acba1a6163f1..ebdca3fba91f 100644
--- a/.mailmap
+++ b/.mailmap
@@ -160,6 +160,8 @@ Matt Ranostay <mranostay@gmail.com> Matthew Ranostay <mranostay@embeddedalley.co
Matt Ranostay <mranostay@gmail.com> <matt.ranostay@intel.com>
Matt Ranostay <matt.ranostay@konsulko.com> <matt@ranostay.consulting>
Matt Redfearn <matt.redfearn@mips.com> <matt.redfearn@imgtec.com>
+Maxime Ripard <mripard@kernel.org> <maxime.ripard@bootlin.com>
+Maxime Ripard <mripard@kernel.org> <maxime.ripard@free-electrons.com>
Mayuresh Janorkar <mayur@ti.com>
Michael Buesch <m@bues.ch>
Michel Dänzer <michel@tungstengraphics.com>
diff --git a/MAINTAINERS b/MAINTAINERS
index f7c84004187d..b5d5c5ec0c28 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -683,7 +683,7 @@ S: Maintained
F: drivers/crypto/sunxi-ss/
ALLWINNER VPU DRIVER
-M: Maxime Ripard <maxime.ripard@bootlin.com>
+M: Maxime Ripard <mripard@kernel.org>
M: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
L: linux-media@vger.kernel.org
S: Maintained
@@ -1408,7 +1408,7 @@ S: Maintained
F: drivers/clk/sunxi/
ARM/Allwinner sunXi SoC support
-M: Maxime Ripard <maxime.ripard@bootlin.com>
+M: Maxime Ripard <mripard@kernel.org>
M: Chen-Yu Tsai <wens@csie.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
@@ -3577,7 +3577,7 @@ F: Documentation/filesystems/caching/cachefiles.txt
F: fs/cachefiles/
CADENCE MIPI-CSI2 BRIDGES
-M: Maxime Ripard <maxime.ripard@bootlin.com>
+M: Maxime Ripard <mripard@kernel.org>
L: linux-media@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/media/cdns,*.txt
@@ -5295,7 +5295,7 @@ F: include/linux/vga*
DRM DRIVERS AND MISC GPU PATCHES
M: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-M: Maxime Ripard <maxime.ripard@bootlin.com>
+M: Maxime Ripard <mripard@kernel.org>
M: Sean Paul <sean@poorly.run>
W: https://01.org/linuxgraphics/gfx-docs/maintainer-tools/drm-misc.html
S: Maintained
@@ -5308,7 +5308,7 @@ F: include/uapi/drm/drm*
F: include/linux/vga*
DRM DRIVERS FOR ALLWINNER A10
-M: Maxime Ripard <maxime.ripard@bootlin.com>
+M: Maxime Ripard <mripard@kernel.org>
L: dri-devel@lists.freedesktop.org
S: Supported
F: drivers/gpu/drm/sun4i/
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
index ced1a19d5f89..46849d6ecb3e 100644
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -185,7 +185,7 @@
uart0: serial@0 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
clock-frequency = <48000000>;
- reg = <0x0 0x2000>;
+ reg = <0x0 0x1000>;
interrupts = <72>;
status = "disabled";
dmas = <&edma 26 0>, <&edma 27 0>;
@@ -934,7 +934,7 @@
uart1: serial@0 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
clock-frequency = <48000000>;
- reg = <0x0 0x2000>;
+ reg = <0x0 0x1000>;
interrupts = <73>;
status = "disabled";
dmas = <&edma 28 0>, <&edma 29 0>;
@@ -966,7 +966,7 @@
uart2: serial@0 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
clock-frequency = <48000000>;
- reg = <0x0 0x2000>;
+ reg = <0x0 0x1000>;
interrupts = <74>;
status = "disabled";
dmas = <&edma 30 0>, <&edma 31 0>;
@@ -1614,7 +1614,7 @@
uart3: serial@0 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
clock-frequency = <48000000>;
- reg = <0x0 0x2000>;
+ reg = <0x0 0x1000>;
interrupts = <44>;
status = "disabled";
};
@@ -1644,7 +1644,7 @@
uart4: serial@0 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
clock-frequency = <48000000>;
- reg = <0x0 0x2000>;
+ reg = <0x0 0x1000>;
interrupts = <45>;
status = "disabled";
};
@@ -1674,7 +1674,7 @@
uart5: serial@0 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
clock-frequency = <48000000>;
- reg = <0x0 0x2000>;
+ reg = <0x0 0x1000>;
interrupts = <46>;
status = "disabled";
};
@@ -1758,6 +1758,8 @@
target-module@cc000 { /* 0x481cc000, ap 60 46.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xcc020 0x4>;
+ reg-names = "rev";
ti,hwmods = "d_can0";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>,
@@ -1780,6 +1782,8 @@
target-module@d0000 { /* 0x481d0000, ap 62 42.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xd0020 0x4>;
+ reg-names = "rev";
ti,hwmods = "d_can1";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>,
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index e5c2f71a7c77..fb6b8aa12cc5 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -234,13 +234,33 @@
interrupt-names = "edma3_tcerrint";
};
- mmc3: mmc@47810000 {
- compatible = "ti,omap4-hsmmc";
+ target-module@47810000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "mmc3";
- ti,needs-special-reset;
- interrupts = <29>;
- reg = <0x47810000 0x1000>;
- status = "disabled";
+ reg = <0x478102fc 0x4>,
+ <0x47810110 0x4>,
+ <0x47810114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&l3s_clkctrl AM3_L3S_MMC3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x47810000 0x1000>;
+
+ mmc3: mmc@0 {
+ compatible = "ti,omap4-hsmmc";
+ ti,needs-special-reset;
+ interrupts = <29>;
+ reg = <0x0 0x1000>;
+ };
};
usb: usb@47400000 {
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 55aff4db9c7c..848e2a8884e2 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -228,13 +228,33 @@
interrupt-names = "edma3_tcerrint";
};
- mmc3: mmc@47810000 {
- compatible = "ti,omap4-hsmmc";
- reg = <0x47810000 0x1000>;
+ target-module@47810000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "mmc3";
- ti,needs-special-reset;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
+ reg = <0x478102fc 0x4>,
+ <0x47810110 0x4>,
+ <0x47810114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&l3s_clkctrl AM4_L3S_MMC3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x47810000 0x1000>;
+
+ mmc3: mmc@0 {
+ compatible = "ti,omap4-hsmmc";
+ ti,needs-special-reset;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x1000>;
+ };
};
sham: sham@53100000 {
diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index 989cb60b9029..04bee4ff9dcb 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -1574,6 +1574,8 @@
target-module@cc000 { /* 0x481cc000, ap 50 46.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xcc020 0x4>;
+ reg-names = "rev";
ti,hwmods = "d_can0";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>;
@@ -1593,6 +1595,8 @@
target-module@d0000 { /* 0x481d0000, ap 52 3a.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xd0020 0x4>;
+ reg-names = "rev";
ti,hwmods = "d_can1";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>;
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index 1d5e99964bbf..0aaacea1d887 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -175,14 +175,9 @@
};
&mmc1 {
- pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
pinctrl-1 = <&mmc1_pins_hs>;
- pinctrl-2 = <&mmc1_pins_sdr12>;
- pinctrl-3 = <&mmc1_pins_sdr25>;
- pinctrl-4 = <&mmc1_pins_sdr50>;
- pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
- pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
};
&mmc2 {
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index c65d7f6d3b5a..ea1c119feaa5 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -16,14 +16,9 @@
};
&mmc1 {
- pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
pinctrl-1 = <&mmc1_pins_hs>;
- pinctrl-2 = <&mmc1_pins_sdr12>;
- pinctrl-3 = <&mmc1_pins_sdr25>;
- pinctrl-4 = <&mmc1_pins_sdr50>;
- pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
- pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
};
&mmc2 {
diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts
index dc5141c35610..7935d70874ce 100644
--- a/arch/arm/boot/dts/am574x-idk.dts
+++ b/arch/arm/boot/dts/am574x-idk.dts
@@ -24,14 +24,9 @@
};
&mmc1 {
- pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
pinctrl-1 = <&mmc1_pins_hs>;
- pinctrl-2 = <&mmc1_pins_default>;
- pinctrl-3 = <&mmc1_pins_hs>;
- pinctrl-4 = <&mmc1_pins_sdr50>;
- pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_conf>;
- pinctrl-6 = <&mmc1_pins_ddr50 &mmc1_iodelay_sdr104_conf>;
};
&mmc2 {
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index d02f5fa61e5f..bc76f1705c0f 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -379,7 +379,7 @@
};
};
-&gpio7 {
+&gpio7_target {
ti,no-reset-on-init;
ti,no-idle-on-init;
};
@@ -430,6 +430,7 @@
bus-width = <4>;
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+ no-1-8-v;
};
&mmc2 {
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
index a374b5cd6db0..7b113b52c3fb 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
@@ -16,14 +16,9 @@
};
&mmc1 {
- pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default>;
pinctrl-1 = <&mmc1_pins_hs>;
- pinctrl-2 = <&mmc1_pins_sdr12>;
- pinctrl-3 = <&mmc1_pins_sdr25>;
- pinctrl-4 = <&mmc1_pins_sdr50>;
- pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>;
- pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>;
vmmc-supply = <&vdd_3v3>;
vqmmc-supply = <&ldo1_reg>;
};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
index 4badd2144db9..30c500b15b21 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
@@ -16,14 +16,9 @@
};
&mmc1 {
- pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default>;
pinctrl-1 = <&mmc1_pins_hs>;
- pinctrl-2 = <&mmc1_pins_sdr12>;
- pinctrl-3 = <&mmc1_pins_sdr25>;
- pinctrl-4 = <&mmc1_pins_sdr50>;
- pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
- pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
vmmc-supply = <&vdd_3v3>;
vqmmc-supply = <&ldo1_reg>;
};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 714e971b912a..de7f85efaa51 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -498,7 +498,7 @@
phy-supply = <&ldousb_reg>;
};
-&gpio7 {
+&gpio7_target {
ti,no-reset-on-init;
ti,no-idle-on-init;
};
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 23faedec08ab..21e5914fdd62 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1261,7 +1261,7 @@
};
};
- target-module@51000 { /* 0x48051000, ap 45 2e.0 */
+ gpio7_target: target-module@51000 { /* 0x48051000, ap 45 2e.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "gpio7";
reg = <0x51000 0x4>,
@@ -3025,7 +3025,7 @@
target-module@80000 { /* 0x48480000, ap 31 16.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- reg = <0x80000 0x4>;
+ reg = <0x80020 0x4>;
reg-names = "rev";
clocks = <&l4per2_clkctrl DRA7_L4PER2_DCAN2_CLKCTRL 0>;
clock-names = "fck";
@@ -4577,7 +4577,7 @@
target-module@c000 { /* 0x4ae3c000, ap 30 04.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- reg = <0xc000 0x4>;
+ reg = <0xc020 0x4>;
reg-names = "rev";
clocks = <&wkupaon_clkctrl DRA7_WKUPAON_DCAN1_CLKCTRL 0>;
clock-names = "fck";
diff --git a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
index 28ebb4eb884a..214b9e6de2c3 100644
--- a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
+++ b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
@@ -32,7 +32,7 @@
*
* Datamanual Revisions:
*
- * AM572x Silicon Revision 2.0: SPRS953B, Revised November 2016
+ * AM572x Silicon Revision 2.0: SPRS953F, Revised May 2019
* AM572x Silicon Revision 1.1: SPRS915R, Revised November 2016
*
*/
@@ -229,45 +229,45 @@
mmc3_pins_default: mmc3_pins_default {
pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
- DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
- DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
- DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
- DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
- DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
>;
};
mmc3_pins_hs: mmc3_pins_hs {
pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
- DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
- DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
- DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
- DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
- DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
>;
};
mmc3_pins_sdr12: mmc3_pins_sdr12 {
pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
- DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
- DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
- DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
- DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
- DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
>;
};
mmc3_pins_sdr25: mmc3_pins_sdr25 {
pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
- DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
- DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
- DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
- DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
- DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
>;
};
diff --git a/arch/arm/boot/dts/vf610-bk4.dts b/arch/arm/boot/dts/vf610-bk4.dts
index 3fa0cbe456db..0f3870d3b099 100644
--- a/arch/arm/boot/dts/vf610-bk4.dts
+++ b/arch/arm/boot/dts/vf610-bk4.dts
@@ -246,13 +246,13 @@
reg = <0>;
};
- n25q128a13_2: flash@1 {
+ n25q128a13_2: flash@2 {
compatible = "n25q128a13", "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <66000000>;
spi-rx-bus-width = <2>;
- reg = <1>;
+ reg = <2>;
};
};
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index 81159af44862..14a6c3eb3298 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -126,6 +126,8 @@ restart:
orr r11, r11, r13 @ mask all requested interrupts
str r11, [r12, #OMAP1510_GPIO_INT_MASK]
+ str r13, [r12, #OMAP1510_GPIO_INT_STATUS] @ ack all requested interrupts
+
ands r10, r13, #KEYBRD_CLK_MASK @ extract keyboard status - set?
beq hksw @ no - try next source
@@ -133,7 +135,6 @@ restart:
@@@@@@@@@@@@@@@@@@@@@@
@ Keyboard clock FIQ mode interrupt handler
@ r10 now contains KEYBRD_CLK_MASK, use it
- str r10, [r12, #OMAP1510_GPIO_INT_STATUS] @ ack the interrupt
bic r11, r11, r10 @ unmask it
str r11, [r12, #OMAP1510_GPIO_INT_MASK]
diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c
index 43899fa56674..0254eb9cf8c6 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq.c
+++ b/arch/arm/mach-omap1/ams-delta-fiq.c
@@ -70,9 +70,7 @@ static irqreturn_t deferred_fiq(int irq, void *dev_id)
* interrupts default to since commit 80ac93c27441
* requires interrupt already acked and unmasked.
*/
- if (irq_chip->irq_ack)
- irq_chip->irq_ack(d);
- if (irq_chip->irq_unmask)
+ if (!WARN_ON_ONCE(!irq_chip->irq_unmask))
irq_chip->irq_unmask(d);
}
for (; irq_counter[gpio] < fiq_count; irq_counter[gpio]++)
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index f9c02f9f1c92..5c3845730dbf 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -127,6 +127,9 @@ static int __init omap4_sram_init(void)
struct device_node *np;
struct gen_pool *sram_pool;
+ if (!soc_is_omap44xx() && !soc_is_omap54xx())
+ return 0;
+
np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu");
if (!np)
pr_warn("%s:Unable to allocate sram needed to handle errata I688\n",
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 4a5b4aee6615..1ec21e9ba1e9 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -379,7 +379,8 @@ static struct omap_hwmod dra7xx_dcan2_hwmod = {
static struct omap_hwmod_class_sysconfig dra7xx_epwmss_sysc = {
.rev_offs = 0x0,
.sysc_offs = 0x4,
- .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET,
+ .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_RESET_STATUS,
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type2,
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index c7a87368850b..12aa7eaeaf68 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -339,6 +339,12 @@
pinctrl-names = "default";
};
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
&pwm_ef {
status = "okay";
pinctrl-0 = <&pwm_e_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index f8d43e3dcf20..1785552d450c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -2386,6 +2386,7 @@
clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
clock-names = "ddr";
phys = <&usb2_phy1>;
+ phy-names = "usb2-phy";
dr_mode = "peripheral";
g-rx-fifo-size = <192>;
g-np-tx-fifo-size = <128>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
index 81780ffcc7f0..4e916e1f71f7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -53,6 +53,7 @@
gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>;
enable-active-high;
+ regulator-always-on;
};
tf_io: gpio-regulator-tf_io {
diff --git a/drivers/bus/hisi_lpc.c b/drivers/bus/hisi_lpc.c
index 19d7b6ff2f17..20c957185af2 100644
--- a/drivers/bus/hisi_lpc.c
+++ b/drivers/bus/hisi_lpc.c
@@ -456,6 +456,17 @@ struct hisi_lpc_acpi_cell {
size_t pdata_size;
};
+static void hisi_lpc_acpi_remove(struct device *hostdev)
+{
+ struct acpi_device *adev = ACPI_COMPANION(hostdev);
+ struct acpi_device *child;
+
+ device_for_each_child(hostdev, NULL, hisi_lpc_acpi_remove_subdev);
+
+ list_for_each_entry(child, &adev->children, node)
+ acpi_device_clear_enumerated(child);
+}
+
/*
* hisi_lpc_acpi_probe - probe children for ACPI FW
* @hostdev: LPC host device pointer
@@ -555,8 +566,7 @@ static int hisi_lpc_acpi_probe(struct device *hostdev)
return 0;
fail:
- device_for_each_child(hostdev, NULL,
- hisi_lpc_acpi_remove_subdev);
+ hisi_lpc_acpi_remove(hostdev);
return ret;
}
@@ -569,6 +579,10 @@ static int hisi_lpc_acpi_probe(struct device *dev)
{
return -ENODEV;
}
+
+static void hisi_lpc_acpi_remove(struct device *hostdev)
+{
+}
#endif // CONFIG_ACPI
/*
@@ -606,24 +620,27 @@ static int hisi_lpc_probe(struct platform_device *pdev)
range->fwnode = dev->fwnode;
range->flags = LOGIC_PIO_INDIRECT;
range->size = PIO_INDIRECT_SIZE;
+ range->hostdata = lpcdev;
+ range->ops = &hisi_lpc_ops;
+ lpcdev->io_host = range;
ret = logic_pio_register_range(range);
if (ret) {
dev_err(dev, "register IO range failed (%d)!\n", ret);
return ret;
}
- lpcdev->io_host = range;
/* register the LPC host PIO resources */
if (acpi_device)
ret = hisi_lpc_acpi_probe(dev);
else
ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
- if (ret)
+ if (ret) {
+ logic_pio_unregister_range(range);
return ret;
+ }
- lpcdev->io_host->hostdata = lpcdev;
- lpcdev->io_host->ops = &hisi_lpc_ops;
+ dev_set_drvdata(dev, lpcdev);
io_end = lpcdev->io_host->io_start + lpcdev->io_host->size;
dev_info(dev, "registered range [%pa - %pa]\n",
@@ -632,6 +649,23 @@ static int hisi_lpc_probe(struct platform_device *pdev)
return ret;
}
+static int hisi_lpc_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct acpi_device *acpi_device = ACPI_COMPANION(dev);
+ struct hisi_lpc_dev *lpcdev = dev_get_drvdata(dev);
+ struct logic_pio_hwaddr *range = lpcdev->io_host;
+
+ if (acpi_device)
+ hisi_lpc_acpi_remove(dev);
+ else
+ of_platform_depopulate(dev);
+
+ logic_pio_unregister_range(range);
+
+ return 0;
+}
+
static const struct of_device_id hisi_lpc_of_match[] = {
{ .compatible = "hisilicon,hip06-lpc", },
{ .compatible = "hisilicon,hip07-lpc", },
@@ -645,5 +679,6 @@ static struct platform_driver hisi_lpc_driver = {
.acpi_match_table = ACPI_PTR(hisi_lpc_acpi_match),
},
.probe = hisi_lpc_probe,
+ .remove = hisi_lpc_remove,
};
builtin_platform_driver(hisi_lpc_driver);
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index e6deabd8305d..2db474ab4c6b 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -949,7 +949,7 @@ static int sysc_best_idle_mode(u32 idlemodes, u32 *best_mode)
*best_mode = SYSC_IDLE_SMART_WKUP;
else if (idlemodes & BIT(SYSC_IDLE_SMART))
*best_mode = SYSC_IDLE_SMART;
- else if (idlemodes & SYSC_IDLE_FORCE)
+ else if (idlemodes & BIT(SYSC_IDLE_FORCE))
*best_mode = SYSC_IDLE_FORCE;
else
return -EINVAL;
@@ -1267,7 +1267,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK("control", 0, 0, 0x10, -1, 0x40000900, 0xffffffff, 0),
SYSC_QUIRK("cpgmac", 0, 0x1200, 0x1208, 0x1204, 0x4edb1902,
0xffff00f0, 0),
- SYSC_QUIRK("dcan", 0, 0, -1, -1, 0xffffffff, 0xffffffff, 0),
+ SYSC_QUIRK("dcan", 0, 0x20, -1, -1, 0xa3170504, 0xffffffff, 0),
+ SYSC_QUIRK("dcan", 0, 0x20, -1, -1, 0x4edb1902, 0xffffffff, 0),
SYSC_QUIRK("dmic", 0, 0, 0x10, -1, 0x50010000, 0xffffffff, 0),
SYSC_QUIRK("dwc3", 0, 0, 0x10, -1, 0x500a0200, 0xffffffff, 0),
SYSC_QUIRK("epwmss", 0, 0, 0x4, -1, 0x47400001, 0xffffffff, 0),
@@ -1692,10 +1693,7 @@ static int sysc_init_sysc_mask(struct sysc *ddata)
if (error)
return 0;
- if (val)
- ddata->cfg.sysc_val = val & ddata->cap->sysc_mask;
- else
- ddata->cfg.sysc_val = ddata->cap->sysc_mask;
+ ddata->cfg.sysc_val = val & ddata->cap->sysc_mask;
return 0;
}
@@ -2385,27 +2383,27 @@ static int sysc_probe(struct platform_device *pdev)
error = sysc_init_dts_quirks(ddata);
if (error)
- goto unprepare;
+ return error;
error = sysc_map_and_check_registers(ddata);
if (error)
- goto unprepare;
+ return error;
error = sysc_init_sysc_mask(ddata);
if (error)
- goto unprepare;
+ return error;
error = sysc_init_idlemodes(ddata);
if (error)
- goto unprepare;
+ return error;
error = sysc_init_syss_mask(ddata);
if (error)
- goto unprepare;
+ return error;
error = sysc_init_pdata(ddata);
if (error)
- goto unprepare;
+ return error;
sysc_init_early_quirks(ddata);
@@ -2415,7 +2413,7 @@ static int sysc_probe(struct platform_device *pdev)
error = sysc_init_resets(ddata);
if (error)
- return error;
+ goto unprepare;
error = sysc_init_module(ddata);
if (error)
diff --git a/drivers/soc/ixp4xx/Kconfig b/drivers/soc/ixp4xx/Kconfig
index de2e62c3310a..e3eb19b85fa4 100644
--- a/drivers/soc/ixp4xx/Kconfig
+++ b/drivers/soc/ixp4xx/Kconfig
@@ -1,4 +1,6 @@
# SPDX-License-Identifier: GPL-2.0-only
+if ARCH_IXP4XX || COMPILE_TEST
+
menu "IXP4xx SoC drivers"
config IXP4XX_QMGR
@@ -15,3 +17,5 @@ config IXP4XX_NPE
and is automatically selected by Ethernet and HSS drivers.
endmenu
+
+endif
diff --git a/drivers/soc/ti/pm33xx.c b/drivers/soc/ti/pm33xx.c
index bb77c220b6f8..ccc6d53fe788 100644
--- a/drivers/soc/ti/pm33xx.c
+++ b/drivers/soc/ti/pm33xx.c
@@ -141,7 +141,7 @@ static int __init am43xx_map_gic(void)
}
#ifdef CONFIG_SUSPEND
-struct wkup_m3_wakeup_src rtc_wake_src(void)
+static struct wkup_m3_wakeup_src rtc_wake_src(void)
{
u32 i;
@@ -157,7 +157,7 @@ struct wkup_m3_wakeup_src rtc_wake_src(void)
return rtc_ext_wakeup;
}
-int am33xx_rtc_only_idle(unsigned long wfi_flags)
+static int am33xx_rtc_only_idle(unsigned long wfi_flags)
{
omap_rtc_power_off_program(&omap_rtc->dev);
am33xx_do_wfi_sram(wfi_flags);
@@ -252,7 +252,7 @@ static int am33xx_pm_begin(suspend_state_t state)
if (state == PM_SUSPEND_MEM && pm_ops->check_off_mode_enable()) {
nvmem = devm_nvmem_device_get(&omap_rtc->dev,
"omap_rtc_scratch0");
- if (nvmem)
+ if (!IS_ERR(nvmem))
nvmem_device_write(nvmem, RTC_SCRATCH_MAGIC_REG * 4, 4,
(void *)&rtc_magic_val);
rtc_only_idle = 1;
@@ -278,9 +278,12 @@ static void am33xx_pm_end(void)
struct nvmem_device *nvmem;
nvmem = devm_nvmem_device_get(&omap_rtc->dev, "omap_rtc_scratch0");
+ if (IS_ERR(nvmem))
+ return;
+
m3_ipc->ops->finish_low_power(m3_ipc);
if (rtc_only_idle) {
- if (retrigger_irq)
+ if (retrigger_irq) {
/*
* 32 bits of Interrupt Set-Pending correspond to 32
* 32 interrupts. Compute the bit offset of the
@@ -291,8 +294,10 @@ static void am33xx_pm_end(void)
writel_relaxed(1 << (retrigger_irq & 31),
gic_dist_base + GIC_INT_SET_PENDING_BASE
+ retrigger_irq / 32 * 4);
- nvmem_device_write(nvmem, RTC_SCRATCH_MAGIC_REG * 4, 4,
- (void *)&val);
+ }
+
+ nvmem_device_write(nvmem, RTC_SCRATCH_MAGIC_REG * 4, 4,
+ (void *)&val);
}
rtc_only_idle = 0;
@@ -415,7 +420,7 @@ static int am33xx_pm_rtc_setup(void)
nvmem = devm_nvmem_device_get(&omap_rtc->dev,
"omap_rtc_scratch0");
- if (nvmem) {
+ if (!IS_ERR(nvmem)) {
nvmem_device_read(nvmem, RTC_SCRATCH_MAGIC_REG * 4,
4, (void *)&rtc_magic_val);
if ((rtc_magic_val & 0xffff) != RTC_REG_BOOT_MAGIC)
diff --git a/include/linux/logic_pio.h b/include/linux/logic_pio.h
index cbd9d8495690..88e1e6304a71 100644
--- a/include/linux/logic_pio.h
+++ b/include/linux/logic_pio.h
@@ -117,6 +117,7 @@ struct logic_pio_hwaddr *find_io_range_by_fwnode(struct fwnode_handle *fwnode);
unsigned long logic_pio_trans_hwaddr(struct fwnode_handle *fwnode,
resource_size_t hw_addr, resource_size_t size);
int logic_pio_register_range(struct logic_pio_hwaddr *newrange);
+void logic_pio_unregister_range(struct logic_pio_hwaddr *range);
resource_size_t logic_pio_to_hwaddr(unsigned long pio);
unsigned long logic_pio_trans_cpuaddr(resource_size_t hw_addr);
diff --git a/lib/logic_pio.c b/lib/logic_pio.c
index feea48fd1a0d..905027574e5d 100644
--- a/lib/logic_pio.c
+++ b/lib/logic_pio.c
@@ -35,7 +35,7 @@ int logic_pio_register_range(struct logic_pio_hwaddr *new_range)
struct logic_pio_hwaddr *range;
resource_size_t start;
resource_size_t end;
- resource_size_t mmio_sz = 0;
+ resource_size_t mmio_end = 0;
resource_size_t iio_sz = MMIO_UPPER_LIMIT;
int ret = 0;
@@ -46,7 +46,7 @@ int logic_pio_register_range(struct logic_pio_hwaddr *new_range)
end = new_range->hw_start + new_range->size;
mutex_lock(&io_range_mutex);
- list_for_each_entry_rcu(range, &io_range_list, list) {
+ list_for_each_entry(range, &io_range_list, list) {
if (range->fwnode == new_range->fwnode) {
/* range already there */
goto end_register;
@@ -56,7 +56,7 @@ int logic_pio_register_range(struct logic_pio_hwaddr *new_range)
/* for MMIO ranges we need to check for overlap */
if (start >= range->hw_start + range->size ||
end < range->hw_start) {
- mmio_sz += range->size;
+ mmio_end = range->io_start + range->size;
} else {
ret = -EFAULT;
goto end_register;
@@ -69,16 +69,16 @@ int logic_pio_register_range(struct logic_pio_hwaddr *new_range)
/* range not registered yet, check for available space */
if (new_range->flags == LOGIC_PIO_CPU_MMIO) {
- if (mmio_sz + new_range->size - 1 > MMIO_UPPER_LIMIT) {
+ if (mmio_end + new_range->size - 1 > MMIO_UPPER_LIMIT) {
/* if it's too big check if 64K space can be reserved */
- if (mmio_sz + SZ_64K - 1 > MMIO_UPPER_LIMIT) {
+ if (mmio_end + SZ_64K - 1 > MMIO_UPPER_LIMIT) {
ret = -E2BIG;
goto end_register;
}
new_range->size = SZ_64K;
pr_warn("Requested IO range too big, new size set to 64K\n");
}
- new_range->io_start = mmio_sz;
+ new_range->io_start = mmio_end;
} else if (new_range->flags == LOGIC_PIO_INDIRECT) {
if (iio_sz + new_range->size - 1 > IO_SPACE_LIMIT) {
ret = -E2BIG;
@@ -99,6 +99,20 @@ end_register:
}
/**
+ * logic_pio_unregister_range - unregister a logical PIO range for a host
+ * @range: pointer to the IO range which has been already registered.
+ *
+ * Unregister a previously-registered IO range node.
+ */
+void logic_pio_unregister_range(struct logic_pio_hwaddr *range)
+{
+ mutex_lock(&io_range_mutex);
+ list_del_rcu(&range->list);
+ mutex_unlock(&io_range_mutex);
+ synchronize_rcu();
+}
+
+/**
* find_io_range_by_fwnode - find logical PIO range for given FW node
* @fwnode: FW node handle associated with logical PIO range
*
@@ -108,26 +122,38 @@ end_register:
*/
struct logic_pio_hwaddr *find_io_range_by_fwnode(struct fwnode_handle *fwnode)
{
- struct logic_pio_hwaddr *range;
+ struct logic_pio_hwaddr *range, *found_range = NULL;
+ rcu_read_lock();
list_for_each_entry_rcu(range, &io_range_list, list) {
- if (range->fwnode == fwnode)
- return range;
+ if (range->fwnode == fwnode) {
+ found_range = range;
+ break;
+ }
}
- return NULL;
+ rcu_read_unlock();
+
+ return found_range;
}
/* Return a registered range given an input PIO token */
static struct logic_pio_hwaddr *find_io_range(unsigned long pio)
{
- struct logic_pio_hwaddr *range;
+ struct logic_pio_hwaddr *range, *found_range = NULL;
+ rcu_read_lock();
list_for_each_entry_rcu(range, &io_range_list, list) {
- if (in_range(pio, range->io_start, range->size))
- return range;
+ if (in_range(pio, range->io_start, range->size)) {
+ found_range = range;
+ break;
+ }
}
- pr_err("PIO entry token %lx invalid\n", pio);
- return NULL;
+ rcu_read_unlock();
+
+ if (!found_range)
+ pr_err("PIO entry token 0x%lx invalid\n", pio);
+
+ return found_range;
}
/**
@@ -180,14 +206,23 @@ unsigned long logic_pio_trans_cpuaddr(resource_size_t addr)
{
struct logic_pio_hwaddr *range;
+ rcu_read_lock();
list_for_each_entry_rcu(range, &io_range_list, list) {
if (range->flags != LOGIC_PIO_CPU_MMIO)
continue;
- if (in_range(addr, range->hw_start, range->size))
- return addr - range->hw_start + range->io_start;
+ if (in_range(addr, range->hw_start, range->size)) {
+ unsigned long cpuaddr;
+
+ cpuaddr = addr - range->hw_start + range->io_start;
+
+ rcu_read_unlock();
+ return cpuaddr;
+ }
}
- pr_err("addr %llx not registered in io_range_list\n",
- (unsigned long long) addr);
+ rcu_read_unlock();
+
+ pr_err("addr %pa not registered in io_range_list\n", &addr);
+
return ~0UL;
}