Merge branch 'next-eeh' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc into next

28 files changed, 1652 insertions, 1648 deletions

diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index 38faeded7d59..9f1371bab5fc 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -8,6 +8,9 @@
 
 struct dma_map_ops;
 struct device_node;
+#ifdef CONFIG_PPC64
+struct pci_dn;
+#endif
 
 /*
  * Arch extensions to struct device.
@@ -34,6 +37,9 @@ struct dev_archdata {
 #ifdef CONFIG_SWIOTLB
 	dma_addr_t		max_direct_dma_addr;
 #endif
+#ifdef CONFIG_PPC64
+	struct pci_dn		*pci_data;
+#endif
 #ifdef CONFIG_EEH
 	struct eeh_dev		*edev;
 #endif
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 55abfd09e47f..a52db28ecc1e 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -29,7 +29,7 @@
 
 struct pci_dev;
 struct pci_bus;
-struct device_node;
+struct pci_dn;
 
 #ifdef CONFIG_EEH
 
@@ -136,14 +136,14 @@ struct eeh_dev {
 	struct eeh_pe *pe;		/* Associated PE		*/
 	struct list_head list;		/* Form link list in the PE	*/
 	struct pci_controller *phb;	/* Associated PHB		*/
-	struct device_node *dn;		/* Associated device node	*/
+	struct pci_dn *pdn;		/* Associated PCI device node	*/
 	struct pci_dev *pdev;		/* Associated PCI device	*/
 	struct pci_bus *bus;		/* PCI bus for partial hotplug	*/
 };
 
-static inline struct device_node *eeh_dev_to_of_node(struct eeh_dev *edev)
+static inline struct pci_dn *eeh_dev_to_pdn(struct eeh_dev *edev)
 {
-	return edev ? edev->dn : NULL;
+	return edev ? edev->pdn : NULL;
 }
 
 static inline struct pci_dev *eeh_dev_to_pci_dev(struct eeh_dev *edev)
@@ -200,8 +200,7 @@ struct eeh_ops {
 	char *name;
 	int (*init)(void);
 	int (*post_init)(void);
-	void* (*of_probe)(struct device_node *dn, void *flag);
-	int (*dev_probe)(struct pci_dev *dev, void *flag);
+	void* (*probe)(struct pci_dn *pdn, void *data);
 	int (*set_option)(struct eeh_pe *pe, int option);
 	int (*get_pe_addr)(struct eeh_pe *pe);
 	int (*get_state)(struct eeh_pe *pe, int *state);
@@ -211,10 +210,10 @@ struct eeh_ops {
 	int (*configure_bridge)(struct eeh_pe *pe);
 	int (*err_inject)(struct eeh_pe *pe, int type, int func,
 			  unsigned long addr, unsigned long mask);
-	int (*read_config)(struct device_node *dn, int where, int size, u32 *val);
-	int (*write_config)(struct device_node *dn, int where, int size, u32 val);
+	int (*read_config)(struct pci_dn *pdn, int where, int size, u32 *val);
+	int (*write_config)(struct pci_dn *pdn, int where, int size, u32 val);
 	int (*next_error)(struct eeh_pe **pe);
-	int (*restore_config)(struct device_node *dn);
+	int (*restore_config)(struct pci_dn *pdn);
 };
 
 extern int eeh_subsystem_flags;
@@ -272,7 +271,7 @@ void eeh_pe_restore_bars(struct eeh_pe *pe);
 const char *eeh_pe_loc_get(struct eeh_pe *pe);
 struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe);
 
-void *eeh_dev_init(struct device_node *dn, void *data);
+void *eeh_dev_init(struct pci_dn *pdn, void *data);
 void eeh_dev_phb_init_dynamic(struct pci_controller *phb);
 int eeh_init(void);
 int __init eeh_ops_register(struct eeh_ops *ops);
@@ -280,8 +279,8 @@ int __exit eeh_ops_unregister(const char *name);
 int eeh_check_failure(const volatile void __iomem *token);
 int eeh_dev_check_failure(struct eeh_dev *edev);
 void eeh_addr_cache_build(void);
-void eeh_add_device_early(struct device_node *);
-void eeh_add_device_tree_early(struct device_node *);
+void eeh_add_device_early(struct pci_dn *);
+void eeh_add_device_tree_early(struct pci_dn *);
 void eeh_add_device_late(struct pci_dev *);
 void eeh_add_device_tree_late(struct pci_bus *);
 void eeh_add_sysfs_files(struct pci_bus *);
@@ -323,7 +322,7 @@ static inline int eeh_init(void)
 	return 0;
 }
 
-static inline void *eeh_dev_init(struct device_node *dn, void *data)
+static inline void *eeh_dev_init(struct pci_dn *pdn, void *data)
 {
 	return NULL;
 }
@@ -339,9 +338,9 @@ static inline int eeh_check_failure(const volatile void __iomem *token)
 
 static inline void eeh_addr_cache_build(void) { }
 
-static inline void eeh_add_device_early(struct device_node *dn) { }
+static inline void eeh_add_device_early(struct pci_dn *pdn) { }
 
-static inline void eeh_add_device_tree_early(struct device_node *dn) { }
+static inline void eeh_add_device_tree_early(struct pci_dn *pdn) { }
 
 static inline void eeh_add_device_late(struct pci_dev *dev) { }
 
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index c8175a3fe560..098d51e924ea 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -125,7 +125,7 @@ struct machdep_calls {
 	unsigned int	(*get_irq)(void);
 
 	/* PCI stuff */
-	/* Called after scanning the bus, before allocating resources */
+	/* Called after allocating resources */
 	void		(*pcibios_fixup)(void);
 	int		(*pci_probe_mode)(struct pci_bus *);
 	void		(*pci_irq_fixup)(struct pci_dev *dev);
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 546d036fe925..2c6dc2a3d14a 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -89,6 +89,7 @@ struct pci_controller {
 
 #ifdef CONFIG_PPC64
 	unsigned long buid;
+	struct pci_dn *pci_data;
 #endif	/* CONFIG_PPC64 */
 
 	void *private_data;
@@ -154,9 +155,15 @@ static inline int isa_vaddr_is_ioport(void __iomem *address)
 struct iommu_table;
 
 struct pci_dn {
+	int     flags;
+
 	int	busno;			/* pci bus number */
 	int	devfn;			/* pci device and function number */
+	int	vendor_id;		/* Vendor ID */
+	int	device_id;		/* Device ID */
+	int	class_code;		/* Device class code */
 
+	struct  pci_dn *parent;
 	struct  pci_controller *phb;	/* for pci devices */
 	struct	iommu_table *iommu_table;	/* for phb's or bridges */
 	struct	device_node *node;	/* back-pointer to the device_node */
@@ -171,14 +178,17 @@ struct pci_dn {
 #ifdef CONFIG_PPC_POWERNV
 	int	pe_number;
 #endif
+	struct list_head child_list;
+	struct list_head list;
 };
 
 /* Get the pointer to a device_node's pci_dn */
 #define PCI_DN(dn)	((struct pci_dn *) (dn)->data)
 
+extern struct pci_dn *pci_get_pdn_by_devfn(struct pci_bus *bus,
+					   int devfn);
 extern struct pci_dn *pci_get_pdn(struct pci_dev *pdev);
-
-extern void * update_dn_pci_info(struct device_node *dn, void *data);
+extern void *update_dn_pci_info(struct device_node *dn, void *data);
 
 static inline int pci_device_from_OF_node(struct device_node *np,
 					  u8 *bus, u8 *devfn)
@@ -191,20 +201,12 @@ static inline int pci_device_from_OF_node(struct device_node *np,
 }
 
 #if defined(CONFIG_EEH)
-static inline struct eeh_dev *of_node_to_eeh_dev(struct device_node *dn)
+static inline struct eeh_dev *pdn_to_eeh_dev(struct pci_dn *pdn)
 {
-	/*
-	 * For those OF nodes whose parent isn't PCI bridge, they
-	 * don't have PCI_DN actually. So we have to skip them for
-	 * any EEH operations.
-	 */
-	if (!dn || !PCI_DN(dn))
-		return NULL;
-
-	return PCI_DN(dn)->edev;
+	return pdn ? pdn->edev : NULL;
 }
 #else
-#define of_node_to_eeh_dev(x) (NULL)
+#define pdn_to_eeh_dev(x)	(NULL)
 #endif
 
 /** Find the bus corresponding to the indicated device node */
diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
index db1e2b8eff3c..ade75238ceb5 100644
--- a/arch/powerpc/include/asm/ppc-pci.h
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -33,9 +33,14 @@ extern struct pci_dev *isa_bridge_pcidev;	/* may be NULL if no ISA bus */
 
 /* PCI device_node operations */
 struct device_node;
+struct pci_dn;
+
 typedef void *(*traverse_func)(struct device_node *me, void *data);
 void *traverse_pci_devices(struct device_node *start, traverse_func pre,
 		void *data);
+void *traverse_pci_dn(struct pci_dn *root,
+		      void *(*fn)(struct pci_dn *, void *),
+		      void *data);
 
 extern void pci_devs_phb_init(void);
 extern void pci_devs_phb_init_dynamic(struct pci_controller *phb);
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 3b2252e7731b..76253eb146be 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -164,30 +164,34 @@ __setup("eeh=", eeh_setup);
  */
 static size_t eeh_dump_dev_log(struct eeh_dev *edev, char *buf, size_t len)
 {
-	struct device_node *dn = eeh_dev_to_of_node(edev);
+	struct pci_dn *pdn = eeh_dev_to_pdn(edev);
 	u32 cfg;
 	int cap, i;
 	int n = 0, l = 0;
 	char buffer[128];
 
-	n += scnprintf(buf+n, len-n, "%s\n", dn->full_name);
-	pr_warn("EEH: of node=%s\n", dn->full_name);
+	n += scnprintf(buf+n, len-n, "%04x:%02x:%02x:%01x\n",
+		       edev->phb->global_number, pdn->busno,
+		       PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn));
+	pr_warn("EEH: of node=%04x:%02x:%02x:%01x\n",
+		edev->phb->global_number, pdn->busno,
+		PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn));
 
-	eeh_ops->read_config(dn, PCI_VENDOR_ID, 4, &cfg);
+	eeh_ops->read_config(pdn, PCI_VENDOR_ID, 4, &cfg);
 	n += scnprintf(buf+n, len-n, "dev/vend:%08x\n", cfg);
 	pr_warn("EEH: PCI device/vendor: %08x\n", cfg);
 
-	eeh_ops->read_config(dn, PCI_COMMAND, 4, &cfg);
+	eeh_ops->read_config(pdn, PCI_COMMAND, 4, &cfg);
 	n += scnprintf(buf+n, len-n, "cmd/stat:%x\n", cfg);
 	pr_warn("EEH: PCI cmd/status register: %08x\n", cfg);
 
 	/* Gather bridge-specific registers */
 	if (edev->mode & EEH_DEV_BRIDGE) {
-		eeh_ops->read_config(dn, PCI_SEC_STATUS, 2, &cfg);
+		eeh_ops->read_config(pdn, PCI_SEC_STATUS, 2, &cfg);
 		n += scnprintf(buf+n, len-n, "sec stat:%x\n", cfg);
 		pr_warn("EEH: Bridge secondary status: %04x\n", cfg);
 
-		eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &cfg);
+		eeh_ops->read_config(pdn, PCI_BRIDGE_CONTROL, 2, &cfg);
 		n += scnprintf(buf+n, len-n, "brdg ctl:%x\n", cfg);
 		pr_warn("EEH: Bridge control: %04x\n", cfg);
 	}
@@ -195,11 +199,11 @@ static size_t eeh_dump_dev_log(struct eeh_dev *edev, char *buf, size_t len)
 	/* Dump out the PCI-X command and status regs */
 	cap = edev->pcix_cap;
 	if (cap) {
-		eeh_ops->read_config(dn, cap, 4, &cfg);
+		eeh_ops->read_config(pdn, cap, 4, &cfg);
 		n += scnprintf(buf+n, len-n, "pcix-cmd:%x\n", cfg);
 		pr_warn("EEH: PCI-X cmd: %08x\n", cfg);
 
-		eeh_ops->read_config(dn, cap+4, 4, &cfg);
+		eeh_ops->read_config(pdn, cap+4, 4, &cfg);
 		n += scnprintf(buf+n, len-n, "pcix-stat:%x\n", cfg);
 		pr_warn("EEH: PCI-X status: %08x\n", cfg);
 	}
@@ -211,7 +215,7 @@ static size_t eeh_dump_dev_log(struct eeh_dev *edev, char *buf, size_t len)
 		pr_warn("EEH: PCI-E capabilities and status follow:\n");
 
 		for (i=0; i<=8; i++) {
-			eeh_ops->read_config(dn, cap+4*i, 4, &cfg);
+			eeh_ops->read_config(pdn, cap+4*i, 4, &cfg);
 			n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
 
 			if ((i % 4) == 0) {
@@ -238,7 +242,7 @@ static size_t eeh_dump_dev_log(struct eeh_dev *edev, char *buf, size_t len)
 		pr_warn("EEH: PCI-E AER capability register set follows:\n");
 
 		for (i=0; i<=13; i++) {
-			eeh_ops->read_config(dn, cap+4*i, 4, &cfg);
+			eeh_ops->read_config(pdn, cap+4*i, 4, &cfg);
 			n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
 
 			if ((i % 4) == 0) {
@@ -414,11 +418,11 @@ int eeh_dev_check_failure(struct eeh_dev *edev)
 	int ret;
 	int active_flags = (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE);
 	unsigned long flags;
-	struct device_node *dn;
+	struct pci_dn *pdn;
 	struct pci_dev *dev;
 	struct eeh_pe *pe, *parent_pe, *phb_pe;
 	int rc = 0;
-	const char *location;
+	const char *location = NULL;
 
 	eeh_stats.total_mmio_ffs++;
 
@@ -429,15 +433,14 @@ int eeh_dev_check_failure(struct eeh_dev *edev)
 		eeh_stats.no_dn++;
 		return 0;
 	}
-	dn = eeh_dev_to_of_node(edev);
 	dev = eeh_dev_to_pci_dev(edev);
 	pe = eeh_dev_to_pe(edev);
 
 	/* Access to IO BARs might get this far and still not want checking. */
 	if (!pe) {
 		eeh_stats.ignored_check++;
-		pr_debug("EEH: Ignored check for %s %s\n",
-			eeh_pci_name(dev), dn->full_name);
+		pr_debug("EEH: Ignored check for %s\n",
+			eeh_pci_name(dev));
 		return 0;
 	}
 
@@ -473,10 +476,13 @@ int eeh_dev_check_failure(struct eeh_dev *edev)
 	if (pe->state & EEH_PE_ISOLATED) {
 		pe->check_count++;
 		if (pe->check_count % EEH_MAX_FAILS == 0) {
-			location = of_get_property(dn, "ibm,loc-code", NULL);
+			pdn = eeh_dev_to_pdn(edev);
+			if (pdn->node)
+				location = of_get_property(pdn->node, "ibm,loc-code", NULL);
 			printk(KERN_ERR "EEH: %d reads ignored for recovering device at "
 				"location=%s driver=%s pci addr=%s\n",
-				pe->check_count, location,
+				pe->check_count,
+				location ? location : "unknown",
 				eeh_driver_name(dev), eeh_pci_name(dev));
 			printk(KERN_ERR "EEH: Might be infinite loop in %s driver\n",
 				eeh_driver_name(dev));
@@ -667,6 +673,55 @@ int eeh_pci_enable(struct eeh_pe *pe, int function)
 	return rc;
 }
 
+static void *eeh_disable_and_save_dev_state(void *data, void *userdata)
+{
+	struct eeh_dev *edev = data;
+	struct pci_dev *pdev = eeh_dev_to_pci_dev(edev);
+	struct pci_dev *dev = userdata;
+
+	/*
+	 * The caller should have disabled and saved the
+	 * state for the specified device
+	 */
+	if (!pdev || pdev == dev)
+		return NULL;
+
+	/* Ensure we have D0 power state */
+	pci_set_power_state(pdev, PCI_D0);
+
+	/* Save device state */
+	pci_save_state(pdev);
+
+	/*
+	 * Disable device to avoid any DMA traffic and
+	 * interrupt from the device
+	 */
+	pci_write_config_word(pdev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
+
+	return NULL;
+}
+
+static void *eeh_restore_dev_state(void *data, void *userdata)
+{
+	struct eeh_dev *edev = data;
+	struct pci_dn *pdn = eeh_dev_to_pdn(edev);
+	struct pci_dev *pdev = eeh_dev_to_pci_dev(edev);
+	struct pci_dev *dev = userdata;
+
+	if (!pdev)
+		return NULL;
+
+	/* Apply customization from firmware */
+	if (pdn && eeh_ops->restore_config)
+		eeh_ops->restore_config(pdn);
+
+	/* The caller should restore state for the specified device */
+	if (pdev != dev)
+		pci_save_state(pdev);
+
+	return NULL;
+}
+
 /**
  * pcibios_set_pcie_slot_reset - Set PCI-E reset state
  * @dev: pci device struct
@@ -689,13 +744,19 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat
 	switch (state) {
 	case pcie_deassert_reset:
 		eeh_ops->reset(pe, EEH_RESET_DEACTIVATE);
+		eeh_unfreeze_pe(pe, false);
 		eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
+		eeh_pe_dev_traverse(pe, eeh_restore_dev_state, dev);
 		break;
 	case pcie_hot_reset:
+		eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE);
+		eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev);
 		eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
 		eeh_ops->reset(pe, EEH_RESET_HOT);
 		break;
 	case pcie_warm_reset:
+		eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE);
+		eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev);
 		eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
 		eeh_ops->reset(pe, EEH_RESET_FUNDAMENTAL);
 		break;
@@ -815,15 +876,15 @@ out:
  */
 void eeh_save_bars(struct eeh_dev *edev)
 {
+	struct pci_dn *pdn;
 	int i;
-	struct device_node *dn;
 
-	if (!edev)
+	pdn = eeh_dev_to_pdn(edev);
+	if (!pdn)
 		return;
-	dn = eeh_dev_to_of_node(edev);
 
 	for (i = 0; i < 16; i++)
-		eeh_ops->read_config(dn, i * 4, 4, &edev->config_space[i]);
+		eeh_ops->read_config(pdn, i * 4, 4, &edev->config_space[i]);
 
 	/*
 	 * For PCI bridges including root port, we need enable bus
@@ -914,7 +975,7 @@ static struct notifier_block eeh_reboot_nb = {
 int eeh_init(void)
 {
 	struct pci_controller *hose, *tmp;
-	struct device_node *phb;
+	struct pci_dn *pdn;
 	static int cnt = 0;
 	int ret = 0;
 
@@ -949,20 +1010,9 @@ int eeh_init(void)
 		return ret;
 
 	/* Enable EEH for all adapters */
-	if (eeh_has_flag(EEH_PROBE_MODE_DEVTREE)) {
-		list_for_each_entry_safe(hose, tmp,
-			&hose_list, list_node) {
-			phb = hose->dn;
-			traverse_pci_devices(phb, eeh_ops->of_probe, NULL);
-		}
-	} else if (eeh_has_flag(EEH_PROBE_MODE_DEV)) {
-		list_for_each_entry_safe(hose, tmp,
-			&hose_list, list_node)
-			pci_walk_bus(hose->bus, eeh_ops->dev_probe, NULL);
-	} else {
-		pr_warn("%s: Invalid probe mode %x",
-			__func__, eeh_subsystem_flags);
-		return -EINVAL;
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+		pdn = hose->pci_data;
+		traverse_pci_dn(pdn, eeh_ops->probe, NULL);
 	}
 
 	/*
@@ -987,8 +1037,8 @@ int eeh_init(void)
 core_initcall_sync(eeh_init);
 
 /**
- * eeh_add_device_early - Enable EEH for the indicated device_node
- * @dn: device node for which to set up EEH
+ * eeh_add_device_early - Enable EEH for the indicated device node
+ * @pdn: PCI device node for which to set up EEH
  *
  * This routine must be used to perform EEH initialization for PCI
  * devices that were added after system boot (e.g. hotplug, dlpar).
@@ -998,44 +1048,41 @@ core_initcall_sync(eeh_init);
  * on the CEC architecture, type of the device, on earlier boot
  * command-line arguments & etc.
  */
-void eeh_add_device_early(struct device_node *dn)
+void eeh_add_device_early(struct pci_dn *pdn)
 {
 	struct pci_controller *phb;
+	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
 
-	/*
-	 * If we're doing EEH probe based on PCI device, we
-	 * would delay the probe until late stage because
-	 * the PCI device isn't available this moment.
-	 */
-	if (!eeh_has_flag(EEH_PROBE_MODE_DEVTREE))
-		return;
-
-	if (!of_node_to_eeh_dev(dn))
+	if (!edev)
 		return;
-	phb = of_node_to_eeh_dev(dn)->phb;
 
 	/* USB Bus children of PCI devices will not have BUID's */
-	if (NULL == phb || 0 == phb->buid)
+	phb = edev->phb;
+	if (NULL == phb ||
+	    (eeh_has_flag(EEH_PROBE_MODE_DEVTREE) && 0 == phb->buid))
 		return;
 
-	eeh_ops->of_probe(dn, NULL);
+	eeh_ops->probe(pdn, NULL);
 }
 
 /**
  * eeh_add_device_tree_early - Enable EEH for the indicated device
- * @dn: device node
+ * @pdn: PCI device node
  *
  * This routine must be used to perform EEH initialization for the
  * indicated PCI device that was added after system boot (e.g.
  * hotplug, dlpar).
  */
-void eeh_add_device_tree_early(struct device_node *dn)
+void eeh_add_device_tree_early(struct pci_dn *pdn)
 {
-	struct device_node *sib;
+	struct pci_dn *n;
 
-	for_each_child_of_node(dn, sib)
-		eeh_add_device_tree_early(sib);
-	eeh_add_device_early(dn);
+	if (!pdn)
+		return;
+
+	list_for_each_entry(n, &pdn->child_list, list)
+		eeh_add_device_tree_early(n);
+	eeh_add_device_early(pdn);
 }
 EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
 
@@ -1048,7 +1095,7 @@ EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
  */
 void eeh_add_device_late(struct pci_dev *dev)
 {
-	struct device_node *dn;
+	struct pci_dn *pdn;
 	struct eeh_dev *edev;
 
 	if (!dev || !eeh_enabled())
@@ -1056,8 +1103,8 @@ void eeh_add_device_late(struct pci_dev *dev)
 
 	pr_debug("EEH: Adding device %s\n", pci_name(dev));
 
-	dn = pci_device_to_OF_node(dev);
-	edev = of_node_to_eeh_dev(dn);
+	pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn);
+	edev = pdn_to_eeh_dev(pdn);
 	if (edev->pdev == dev) {
 		pr_debug("EEH: Already referenced !\n");
 		return;
@@ -1089,13 +1136,6 @@ void eeh_add_device_late(struct pci_dev *dev)
 	edev->pdev = dev;
 	dev->dev.archdata.edev = edev;
 
-	/*
-	 * We have to do the EEH probe here because the PCI device
-	 * hasn't been created yet in the early stage.
-	 */
-	if (eeh_has_flag(EEH_PROBE_MODE_DEV))
-		eeh_ops->dev_probe(dev, NULL);
-
 	eeh_addr_cache_insert_dev(dev);
 }
 
diff --git a/arch/powerpc/kernel/eeh_cache.c b/arch/powerpc/kernel/eeh_cache.c
index 07d8a2423a61..eeabeabea49c 100644
--- a/arch/powerpc/kernel/eeh_cache.c
+++ b/arch/powerpc/kernel/eeh_cache.c
@@ -171,30 +171,27 @@ eeh_addr_cache_insert(struct pci_dev *dev, unsigned long alo,
 
 static void __eeh_addr_cache_insert_dev(struct pci_dev *dev)
 {
-	struct device_node *dn;
+	struct pci_dn *pdn;
 	struct eeh_dev *edev;
 	int i;
 
-	dn = pci_device_to_OF_node(dev);
-	if (!dn) {
+	pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn);
+	if (!pdn) {
 		pr_warn("PCI: no pci dn found for dev=%s\n",
 			pci_name(dev));
 		return;
 	}
 
-	edev = of_node_to_eeh_dev(dn);
+	edev = pdn_to_eeh_dev(pdn);
 	if (!edev) {
-		pr_warn("PCI: no EEH dev found for dn=%s\n",
-			dn->full_name);
+		pr_warn("PCI: no EEH dev found for %s\n",
+			pci_name(dev));
 		return;
 	}
 
 	/* Skip any devices for which EEH is not enabled. */
 	if (!edev->pe) {
-#ifdef DEBUG
-		pr_info("PCI: skip building address cache for=%s - %s\n",
-			pci_name(dev), dn->full_name);
-#endif
+		dev_dbg(&dev->dev, "EEH: Skip building address cache\n");
 		return;
 	}
 
@@ -282,18 +279,18 @@ void eeh_addr_cache_rmv_dev(struct pci_dev *dev)
  */
 void eeh_addr_cache_build(void)
 {
-	struct device_node *dn;
+	struct pci_dn *pdn;
 	struct eeh_dev *edev;
 	struct pci_dev *dev = NULL;
 
 	spin_lock_init(&pci_io_addr_cache_root.piar_lock);
 
 	for_each_pci_dev(dev) {
-		dn = pci_device_to_OF_node(dev);
-		if (!dn)
+		pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn);
+		if (!pdn)
 			continue;
 
-		edev = of_node_to_eeh_dev(dn);
+		edev = pdn_to_eeh_dev(pdn);
 		if (!edev)
 			continue;
 
diff --git a/arch/powerpc/kernel/eeh_dev.c b/arch/powerpc/kernel/eeh_dev.c
index e5274ee9a75f..aabba94ff9cb 100644
--- a/arch/powerpc/kernel/eeh_dev.c
+++ b/arch/powerpc/kernel/eeh_dev.c
@@ -43,13 +43,13 @@
 
 /**
  * eeh_dev_init - Create EEH device according to OF node
- * @dn: device node
+ * @pdn: PCI device node
  * @data: PHB
  *
  * It will create EEH device according to the given OF node. The function
  * might be called by PCI emunation, DR, PHB hotplug.
  */
-void *eeh_dev_init(struct device_node *dn, void *data)
+void *eeh_dev_init(struct pci_dn *pdn, void *data)
 {
 	struct pci_controller *phb = data;
 	struct eeh_dev *edev;
@@ -63,8 +63,8 @@ void *eeh_dev_init(struct device_node *dn, void *data)
 	}
 
 	/* Associate EEH device with OF node */
-	PCI_DN(dn)->edev = edev;
-	edev->dn  = dn;
+	pdn->edev = edev;
+	edev->pdn = pdn;
 	edev->phb = phb;
 	INIT_LIST_HEAD(&edev->list);
 
@@ -80,16 +80,16 @@ void *eeh_dev_init(struct device_node *dn, void *data)
  */
 void eeh_dev_phb_init_dynamic(struct pci_controller *phb)
 {
-	struct device_node *dn = phb->dn;
+	struct pci_dn *root = phb->pci_data;
 
 	/* EEH PE for PHB */
 	eeh_phb_pe_create(phb);
 
 	/* EEH device for PHB */
-	eeh_dev_init(dn, phb);
+	eeh_dev_init(root, phb);
 
 	/* EEH devices for children OF nodes */
-	traverse_pci_devices(dn, eeh_dev_init, phb);
+	traverse_pci_dn(root, eeh_dev_init, phb);
 }
 
 /**
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index d099540c0f56..24768ff3cb73 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -83,28 +83,6 @@ static inline void eeh_pcid_put(struct pci_dev *pdev)
 	module_put(pdev->driver->driver.owner);
 }
 
-#if 0
-static void print_device_node_tree(struct pci_dn *pdn, int dent)
-{
-	int i;
-	struct device_node *pc;
-
-	if (!pdn)
-		return;
-	for (i = 0; i < dent; i++)
-		printk(" ");
-	printk("dn=%s mode=%x \tcfg_addr=%x pe_addr=%x \tfull=%s\n",
-		pdn->node->name, pdn->eeh_mode, pdn->eeh_config_addr,
-		pdn->eeh_pe_config_addr, pdn->node->full_name);
-	dent += 3;
-	pc = pdn->node->child;
-	while (pc) {
-		print_device_node_tree(PCI_DN(pc), dent);
-		pc = pc->sibling;
-	}
-}
-#endif
-
 /**
  * eeh_disable_irq - Disable interrupt for the recovering device
  * @dev: PCI device
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index 1e4946c36f9e..35f0b62259bb 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -291,27 +291,25 @@ struct eeh_pe *eeh_pe_get(struct eeh_dev *edev)
  */
 static struct eeh_pe *eeh_pe_get_parent(struct eeh_dev *edev)
 {
-	struct device_node *dn;
 	struct eeh_dev *parent;
+	struct pci_dn *pdn = eeh_dev_to_pdn(edev);
 
 	/*
 	 * It might have the case for the indirect parent
 	 * EEH device already having associated PE, but
 	 * the direct parent EEH device doesn't have yet.
 	 */
-	dn = edev->dn->parent;
-	while (dn) {
+	pdn = pdn ? pdn->parent : NULL;
+	while (pdn) {
 		/* We're poking out of PCI territory */
-		if (!PCI_DN(dn)) return NULL;
-
-		parent = of_node_to_eeh_dev(dn);
-		/* We're poking out of PCI territory */
-		if (!parent) return NULL;
+		parent = pdn_to_eeh_dev(pdn);
+		if (!parent)
+			return NULL;
 
 		if (parent->pe)
 			return parent->pe;
 
-		dn = dn->parent;
+		pdn = pdn->parent;
 	}
 
 	return NULL;
@@ -330,6 +328,13 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
 {
 	struct eeh_pe *pe, *parent;
 
+	/* Check if the PE number is valid */
+	if (!eeh_has_flag(EEH_VALID_PE_ZERO) && !edev->pe_config_addr) {
+		pr_err("%s: Invalid PE#0 for edev 0x%x on PHB#%d\n",
+		       __func__, edev->config_addr, edev->phb->global_number);
+		return -EINVAL;
+	}
+
 	/*
 	 * Search the PE has been existing or not according
 	 * to the PE address. If that has been existing, the
@@ -338,21 +343,18 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
 	 */
 	pe = eeh_pe_get(edev);
 	if (pe && !(pe->type & EEH_PE_INVALID)) {
-		if (!edev->pe_config_addr) {
-			pr_err("%s: PE with addr 0x%x already exists\n",
-				__func__, edev->config_addr);
-			return -EEXIST;
-		}
-
 		/* Mark the PE as type of PCI bus */
 		pe->type = EEH_PE_BUS;
 		edev->pe = pe;
 
 		/* Put the edev to PE */
 		list_add_tail(&edev->list, &pe->edevs);
-		pr_debug("EEH: Add %s to Bus PE#%x\n",
-			edev->dn->full_name, pe->addr);
-
+		pr_debug("EEH: Add %04x:%02x:%02x.%01x to Bus PE#%x\n",
+			edev->phb->global_number,
+			edev->config_addr >> 8,
+			PCI_SLOT(edev->config_addr & 0xFF),
+			PCI_FUNC(edev->config_addr & 0xFF),
+			pe->addr);
 		return 0;
 	} else if (pe && (pe->type & EEH_PE_INVALID)) {
 		list_add_tail(&edev->list, &pe->edevs);
@@ -368,9 +370,14 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
 			parent->type &= ~(EEH_PE_INVALID | EEH_PE_KEEP);
 			parent = parent->parent;
 		}
-		pr_debug("EEH: Add %s to Device PE#%x, Parent PE#%x\n",
-			edev->dn->full_name, pe->addr, pe->parent->addr);
 
+		pr_debug("EEH: Add %04x:%02x:%02x.%01x to Device "
+			 "PE#%x, Parent PE#%x\n",
+			edev->phb->global_number,
+			edev->config_addr >> 8,
+                        PCI_SLOT(edev->config_addr & 0xFF),
+                        PCI_FUNC(edev->config_addr & 0xFF),
+			pe->addr, pe->parent->addr);
 		return 0;
 	}
 
@@ -409,8 +416,13 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
 	list_add_tail(&pe->child, &parent->child_list);
 	list_add_tail(&edev->list, &pe->edevs);
 	edev->pe = pe;
-	pr_debug("EEH: Add %s to Device PE#%x, Parent PE#%x\n",
-		edev->dn->full_name, pe->addr, pe->parent->addr);
+	pr_debug("EEH: Add %04x:%02x:%02x.%01x to "
+		 "Device PE#%x, Parent PE#%x\n",
+		 edev->phb->global_number,
+		 edev->config_addr >> 8,
+		 PCI_SLOT(edev->config_addr & 0xFF),
+		 PCI_FUNC(edev->config_addr & 0xFF),
+		 pe->addr, pe->parent->addr);
 
 	return 0;
 }
@@ -430,8 +442,11 @@ int eeh_rmv_from_parent_pe(struct eeh_dev *edev)
 	int cnt;
 
 	if (!edev->pe) {
-		pr_debug("%s: No PE found for EEH device %s\n",
-			 __func__, edev->dn->full_name);
+		pr_debug("%s: No PE found for device %04x:%02x:%02x.%01x\n",
+			 __func__,  edev->phb->global_number,
+			 edev->config_addr >> 8,
+			 PCI_SLOT(edev->config_addr & 0xFF),
+			 PCI_FUNC(edev->config_addr & 0xFF));
 		return -EEXIST;
 	}
 
@@ -653,9 +668,9 @@ void eeh_pe_state_clear(struct eeh_pe *pe, int state)
  * blocked on normal path during the stage. So we need utilize
  * eeh operations, which is always permitted.
  */
-static void eeh_bridge_check_link(struct eeh_dev *edev,
-				  struct device_node *dn)
+static void eeh_bridge_check_link(struct eeh_dev *edev)
 {
+	struct pci_dn *pdn = eeh_dev_to_pdn(edev);
 	int cap;
 	uint32_t val;
 	int timeout = 0;
@@ -675,32 +690,32 @@ static void eeh_bridge_check_link(struct eeh_dev *edev,
 
 	/* Check slot status */
 	cap = edev->pcie_cap;
-	eeh_ops->read_config(dn, cap + PCI_EXP_SLTSTA, 2, &val);
+	eeh_ops->read_config(pdn, cap + PCI_EXP_SLTSTA, 2, &val);
 	if (!(val & PCI_EXP_SLTSTA_PDS)) {
 		pr_debug("  No card in the slot (0x%04x) !\n", val);
 		return;
 	}
 
 	/* Check power status if we have the capability */
-	eeh_ops->read_config(dn, cap + PCI_EXP_SLTCAP, 2, &val);
+	eeh_ops->read_config(pdn, cap + PCI_EXP_SLTCAP, 2, &val);
 	if (val & PCI_EXP_SLTCAP_PCP) {
-		eeh_ops->read_config(dn, cap + PCI_EXP_SLTCTL, 2, &val);
+		eeh_ops->read_config(pdn, cap + PCI_EXP_SLTCTL, 2, &val);
 		if (val & PCI_EXP_SLTCTL_PCC) {
 			pr_debug("  In power-off state, power it on ...\n");
 			val &= ~(PCI_EXP_SLTCTL_PCC | PCI_EXP_SLTCTL_PIC);
 			val |= (0x0100 & PCI_EXP_SLTCTL_PIC);
-			eeh_ops->write_config(dn, cap + PCI_EXP_SLTCTL, 2, val);
+			eeh_ops->write_config(pdn, cap + PCI_EXP_SLTCTL, 2, val);
 			msleep(2 * 1000);
 		}
 	}
 
 	/* Enable link */
-	eeh_ops->read_config(dn, cap + PCI_EXP_LNKCTL, 2, &val);
+	eeh_ops->read_config(pdn, cap + PCI_EXP_LNKCTL, 2, &val);
 	val &= ~PCI_EXP_LNKCTL_LD;
-	eeh_ops->write_config(dn, cap + PCI_EXP_LNKCTL, 2, val);
+	eeh_ops->write_config(pdn, cap + PCI_EXP_LNKCTL, 2, val);
 
 	/* Check link */
-	eeh_ops->read_config(dn, cap + PCI_EXP_LNKCAP, 4, &val);
+	eeh_ops->read_config(pdn, cap + PCI_EXP_LNKCAP, 4, &val);
 	if (!(val & PCI_EXP_LNKCAP_DLLLARC)) {
 		pr_debug("  No link reporting capability (0x%08x) \n", val);
 		msleep(1000);
@@ -713,7 +728,7 @@ static void eeh_bridge_check_link(struct eeh_dev *edev,
 		msleep(20);
 		timeout += 20;
 
-		eeh_ops->read_config(dn, cap + PCI_EXP_LNKSTA, 2, &val);
+		eeh_ops->read_config(pdn, cap + PCI_EXP_LNKSTA, 2, &val);
 		if (val & PCI_EXP_LNKSTA_DLLLA)
 			break;
 	}
@@ -728,9 +743,9 @@ static void eeh_bridge_check_link(struct eeh_dev *edev,
 #define BYTE_SWAP(OFF)	(8*((OFF)/4)+3-(OFF))
 #define SAVED_BYTE(OFF)	(((u8 *)(edev->config_space))[BYTE_SWAP(OFF)])
 
-static void eeh_restore_bridge_bars(struct eeh_dev *edev,
-				    struct device_node *dn)
+static void eeh_restore_bridge_bars(struct eeh_dev *edev)
 {
+	struct pci_dn *pdn = eeh_dev_to_pdn(edev);
 	int i;
 
 	/*
@@ -738,49 +753,49 @@ static void eeh_restore_bridge_bars(struct eeh_dev *edev,
 	 * Bus numbers and windows: 0x18 - 0x30
 	 */
 	for (i = 4; i < 13; i++)
-		eeh_ops->write_config(dn, i*4, 4, edev->config_space[i]);
+		eeh_ops->write_config(pdn, i*4, 4, edev->config_space[i]);
 	/* Rom: 0x38 */
-	eeh_ops->write_config(dn, 14*4, 4, edev->config_space[14]);
+	eeh_ops->write_config(pdn, 14*4, 4, edev->config_space[14]);
 
 	/* Cache line & Latency timer: 0xC 0xD */
-	eeh_ops->write_config(dn, PCI_CACHE_LINE_SIZE, 1,
+	eeh_ops->write_config(pdn, PCI_CACHE_LINE_SIZE, 1,
                 SAVED_BYTE(PCI_CACHE_LINE_SIZE));
-        eeh_ops->write_config(dn, PCI_LATENCY_TIMER, 1,
+        eeh_ops->write_config(pdn, PCI_LATENCY_TIMER, 1,
                 SAVED_BYTE(PCI_LATENCY_TIMER));
 	/* Max latency, min grant, interrupt ping and line: 0x3C */
-	eeh_ops->write_config(dn, 15*4, 4, edev->config_space[15]);
+	eeh_ops->write_config(pdn, 15*4, 4, edev->config_space[15]);
 
 	/* PCI Command: 0x4 */
-	eeh_ops->write_config(dn, PCI_COMMAND, 4, edev->config_space[1]);
+	eeh_ops->write_config(pdn, PCI_COMMAND, 4, edev->config_space[1]);
 
 	/* Check the PCIe link is ready */
-	eeh_bridge_check_link(edev, dn);
+	eeh_bridge_check_link(edev);
 }
 
-static void eeh_restore_device_bars(struct eeh_dev *edev,
-				    struct device_node *dn)
+static void eeh_restore_device_bars(struct eeh_dev *edev)
 {
+	struct pci_dn *pdn = eeh_dev_to_pdn(edev);
 	int i;
 	u32 cmd;
 
 	for (i = 4; i < 10; i++)
-		eeh_ops->write_config(dn, i*4, 4, edev->config_space[i]);
+		eeh_ops->write_config(pdn, i*4, 4, edev->config_space[i]);
 	/* 12 == Expansion ROM Address */
-	eeh_ops->write_config(dn, 12*4, 4, edev->config_space[12]);
+	eeh_ops->write_config(pdn, 12*4, 4, edev->config_space[12]);
 
-	eeh_ops->write_config(dn, PCI_CACHE_LINE_SIZE, 1,
+	eeh_ops->write_config(pdn, PCI_CACHE_LINE_SIZE, 1,
 		SAVED_BYTE(PCI_CACHE_LINE_SIZE));
-	eeh_ops->write_config(dn, PCI_LATENCY_TIMER, 1,
+	eeh_ops->write_config(pdn, PCI_LATENCY_TIMER, 1,
 		SAVED_BYTE(PCI_LATENCY_TIMER));
 
 	/* max latency, min grant, interrupt pin and line */
-	eeh_ops->write_config(dn, 15*4, 4, edev->config_space[15]);
+	eeh_ops->write_config(pdn, 15*4, 4, edev->config_space[15]);
 
 	/*
 	 * Restore PERR & SERR bits, some devices require it,
 	 * don't touch the other command bits
 	 */
-	eeh_ops->read_config(dn, PCI_COMMAND, 4, &cmd);
+	eeh_ops->read_config(pdn, PCI_COMMAND, 4, &cmd);
 	if (edev->config_space[1] & PCI_COMMAND_PARITY)
 		cmd |= PCI_COMMAND_PARITY;
 	else
@@ -789,7 +804,7 @@ static void eeh_restore_device_bars(struct eeh_dev *edev,
 		cmd |= PCI_COMMAND_SERR;
 	else
 		cmd &= ~PCI_COMMAND_SERR;
-	eeh_ops->write_config(dn, PCI_COMMAND, 4, cmd);
+	eeh_ops->write_config(pdn, PCI_COMMAND, 4, cmd);
 }
 
 /**
@@ -804,16 +819,16 @@ static void eeh_restore_device_bars(struct eeh_dev *edev,
 static void *eeh_restore_one_device_bars(void *data, void *flag)
 {
 	struct eeh_dev *edev = (struct eeh_dev *)data;
-	struct device_node *dn = eeh_dev_to_of_node(edev);
+	struct pci_dn *pdn = eeh_dev_to_pdn(edev);
 
 	/* Do special restore for bridges */
 	if (edev->mode & EEH_DEV_BRIDGE)
-		eeh_restore_bridge_bars(edev, dn);
+		eeh_restore_bridge_bars(edev);
 	else
-		eeh_restore_device_bars(edev, dn);
+		eeh_restore_device_bars(edev);
 
-	if (eeh_ops->restore_config)
-		eeh_ops->restore_config(dn);
+	if (eeh_ops->restore_config && pdn)
+		eeh_ops->restore_config(pdn);
 
 	return NULL;
 }
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index 2f35a72642c6..b60a67d92ebd 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -72,7 +72,7 @@ static int of_pci_phb_probe(struct platform_device *dev)
 
 	/* Register devices with EEH */
 	if (dev->dev.of_node->child)
-		eeh_add_device_tree_early(dev->dev.of_node);
+		eeh_add_device_tree_early(PCI_DN(dev->dev.of_node));
 
 	/* Scan the bus */
 	pcibios_scan_phb(phb);
diff --git a/arch/powerpc/kernel/pci-hotplug.c b/arch/powerpc/kernel/pci-hotplug.c
index 5b789177aa29..18d9575729a3 100644
--- a/arch/powerpc/kernel/pci-hotplug.c
+++ b/arch/powerpc/kernel/pci-hotplug.c
@@ -75,7 +75,7 @@ void pcibios_add_pci_devices(struct pci_bus * bus)
 	struct pci_dev *dev;
 	struct device_node *dn = pci_bus_to_OF_node(bus);
 
-	eeh_add_device_tree_early(dn);
+	eeh_add_device_tree_early(PCI_DN(dn));
 
 	mode = PCI_PROBE_NORMAL;
 	if (ppc_md.pci_probe_mode)
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index 83df3075d3df..65b98367005c 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -32,12 +32,108 @@
 #include <asm/ppc-pci.h>
 #include <asm/firmware.h>
 
+/*
+ * The function is used to find the firmware data of one
+ * specific PCI device, which is attached to the indicated
+ * PCI bus. For VFs, their firmware data is linked to that
+ * one of PF's bridge. For other devices, their firmware
+ * data is linked to that of their bridge.
+ */
+static struct pci_dn *pci_bus_to_pdn(struct pci_bus *bus)
+{
+	struct pci_bus *pbus;
+	struct device_node *dn;
+	struct pci_dn *pdn;
+
+	/*
+	 * We probably have virtual bus which doesn't
+	 * have associated bridge.
+	 */
+	pbus = bus;
+	while (pbus) {
+		if (pci_is_root_bus(pbus) || pbus->self)
+			break;
+
+		pbus = pbus->parent;
+	}
+
+	/*
+	 * Except virtual bus, all PCI buses should
+	 * have device nodes.
+	 */
+	dn = pci_bus_to_OF_node(pbus);
+	pdn = dn ? PCI_DN(dn) : NULL;
+
+	return pdn;
+}
+
+struct pci_dn *pci_get_pdn_by_devfn(struct pci_bus *bus,
+				    int devfn)
+{
+	struct device_node *dn = NULL;
+	struct pci_dn *parent, *pdn;
+	struct pci_dev *pdev = NULL;
+
+	/* Fast path: fetch from PCI device */
+	list_for_each_entry(pdev, &bus->devices, bus_list) {
+		if (pdev->devfn == devfn) {
+			if (pdev->dev.archdata.pci_data)
+				return pdev->dev.archdata.pci_data;
+
+			dn = pci_device_to_OF_node(pdev);
+			break;
+		}
+	}
+
+	/* Fast path: fetch from device node */
+	pdn = dn ? PCI_DN(dn) : NULL;
+	if (pdn)
+		return pdn;
+
+	/* Slow path: fetch from firmware data hierarchy */
+	parent = pci_bus_to_pdn(bus);
+	if (!parent)
+		return NULL;
+
+	list_for_each_entry(pdn, &parent->child_list, list) {
+		if (pdn->busno == bus->number &&
+                    pdn->devfn == devfn)
+                        return pdn;
+        }
+
+	return NULL;
+}
+
 struct pci_dn *pci_get_pdn(struct pci_dev *pdev)
 {
-	struct device_node *dn = pci_device_to_OF_node(pdev);
-	if (!dn)
+	struct device_node *dn;
+	struct pci_dn *parent, *pdn;
+
+	/* Search device directly */
+	if (pdev->dev.archdata.pci_data)
+		return pdev->dev.archdata.pci_data;
+
+	/* Check device node */
+	dn = pci_device_to_OF_node(pdev);
+	pdn = dn ? PCI_DN(dn) : NULL;
+	if (pdn)
+		return pdn;
+
+	/*
+	 * VFs don't have device nodes. We hook their
+	 * firmware data to PF's bridge.
+	 */
+	parent = pci_bus_to_pdn(pdev->bus);
+	if (!parent)
 		return NULL;
-	return PCI_DN(dn);
+
+	list_for_each_entry(pdn, &parent->child_list, list) {
+		if (pdn->busno == pdev->bus->number &&
+		    pdn->devfn == pdev->devfn)
+			return pdn;
+	}
+
+	return NULL;
 }
 
 /*
@@ -49,6 +145,7 @@ void *update_dn_pci_info(struct device_node *dn, void *data)
 	struct pci_controller *phb = data;
 	const __be32 *type = of_get_property(dn, "ibm,pci-config-space-type", NULL);
 	const __be32 *regs;
+	struct device_node *parent;
 	struct pci_dn *pdn;
 
 	pdn = zalloc_maybe_bootmem(sizeof(*pdn), GFP_KERNEL);
@@ -69,7 +166,25 @@ void *update_dn_pci_info(struct device_node *dn, void *data)
 		pdn->devfn = (addr >> 8) & 0xff;
 	}
 
+	/* vendor/device IDs and class code */
+	regs = of_get_property(dn, "vendor-id", NULL);
+	pdn->vendor_id = regs ? of_read_number(regs, 1) : 0;
+	regs = of_get_property(dn, "device-id", NULL);
+	pdn->device_id = regs ? of_read_number(regs, 1) : 0;
+	regs = of_get_property(dn, "class-code", NULL);
+	pdn->class_code = regs ? of_read_number(regs, 1) : 0;
+
+	/* Extended config space */
 	pdn->pci_ext_config_space = (type && of_read_number(type, 1) == 1);
+
+	/* Attach to parent node */
+	INIT_LIST_HEAD(&pdn->child_list);
+	INIT_LIST_HEAD(&pdn->list);
+	parent = of_get_parent(dn);
+	pdn->parent = parent ? PCI_DN(parent) : NULL;
+	if (pdn->parent)
+		list_add_tail(&pdn->list, &pdn->parent->child_list);
+
 	return NULL;
 }
 
@@ -131,6 +246,46 @@ void *traverse_pci_devices(struct device_node *start, traverse_func pre,
 	return NULL;
 }
 
+static struct pci_dn *pci_dn_next_one(struct pci_dn *root,
+				      struct pci_dn *pdn)
+{
+	struct list_head *next = pdn->child_list.next;
+
+	if (next != &pdn->child_list)
+		return list_entry(next, struct pci_dn, list);
+
+	while (1) {
+		if (pdn == root)
+			return NULL;
+
+		next = pdn->list.next;
+		if (next != &pdn->parent->child_list)
+			break;
+
+		pdn = pdn->parent;
+	}
+
+	return list_entry(next, struct pci_dn, list);
+}
+
+void *traverse_pci_dn(struct pci_dn *root,
+		      void *(*fn)(struct pci_dn *, void *),
+		      void *data)
+{
+	struct pci_dn *pdn = root;
+	void *ret;
+
+	/* Only scan the child nodes */
+	for (pdn = pci_dn_next_one(root, pdn); pdn;
+	     pdn = pci_dn_next_one(root, pdn)) {
+		ret = fn(pdn, data);
+		if (ret)
+			return ret;
+	}
+
+	return NULL;
+}
+
 /** 
  * pci_devs_phb_init_dynamic - setup pci devices under this PHB
  * phb: pci-to-host bridge (top-level bridge connecting to cpu)
@@ -147,8 +302,12 @@ void pci_devs_phb_init_dynamic(struct pci_controller *phb)
 	/* PHB nodes themselves must not match */
 	update_dn_pci_info(dn, phb);
 	pdn = dn->data;
-	if (pdn)
+	if (pdn) {
 		pdn->devfn = pdn->busno = -1;
+		pdn->vendor_id = pdn->device_id = pdn->class_code = 0;
+		pdn->phb = phb;
+		phb->pci_data = pdn;
+	}
 
 	/* Update dn->phb ptrs for new phb and children devices */
 	traverse_pci_devices(dn, update_dn_pci_info, phb);
@@ -171,3 +330,16 @@ void __init pci_devs_phb_init(void)
 	list_for_each_entry_safe(phb, tmp, &hose_list, list_node)
 		pci_devs_phb_init_dynamic(phb);
 }
+
+static void pci_dev_pdn_setup(struct pci_dev *pdev)
+{
+	struct pci_dn *pdn;
+
+	if (pdev->dev.archdata.pci_data)
+		return;
+
+	/* Setup the fast path */
+	pdn = pci_get_pdn(pdev);
+	pdev->dev.archdata.pci_data = pdn;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, pci_dev_pdn_setup);
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index e6245e9c7d8d..7122dfece393 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -305,7 +305,7 @@ static struct pci_dev *of_scan_pci_dev(struct pci_bus *bus,
 	const __be32 *reg;
 	int reglen, devfn;
 #ifdef CONFIG_EEH
-	struct eeh_dev *edev = of_node_to_eeh_dev(dn);
+	struct eeh_dev *edev = pdn_to_eeh_dev(PCI_DN(dn));
 #endif
 
 	pr_debug("  * %s\n", dn->full_name);
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index ce230da2c015..af29df2517f7 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -113,7 +113,7 @@ static int rtas_pci_read_config(struct pci_bus *bus,
 
 	ret = rtas_read_config(pdn, where, size, val);
 	if (*val == EEH_IO_ERROR_VALUE(size) &&
-	    eeh_dev_check_failure(of_node_to_eeh_dev(dn)))
+	    eeh_dev_check_failure(pdn_to_eeh_dev(pdn)))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	return ret;
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index 6f3c5d33c3af..33e44f37212f 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -5,7 +5,7 @@ obj-y			+= opal-msglog.o opal-hmi.o opal-power.o
 
 obj-$(CONFIG_SMP)	+= smp.o subcore.o subcore-asm.o
 obj-$(CONFIG_PCI)	+= pci.o pci-p5ioc2.o pci-ioda.o
-obj-$(CONFIG_EEH)	+= eeh-ioda.o eeh-powernv.o
+obj-$(CONFIG_EEH)	+= eeh-powernv.o
 obj-$(CONFIG_PPC_SCOM)	+= opal-xscom.o
 obj-$(CONFIG_MEMORY_FAILURE)	+= opal-memory-errors.o
 obj-$(CONFIG_TRACEPOINTS)	+= opal-tracepoints.o
diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c
deleted file mode 100644
index 2809c9895288..000000000000
--- a/arch/powerpc/platforms/powernv/eeh-ioda.c
+++ /dev/null
@@ -1,1149 +0,0 @@
-/*
- * The file intends to implement the functions needed by EEH, which is
- * built on IODA compliant chip. Actually, lots of functions related
- * to EEH would be built based on the OPAL APIs.
- *
- * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2013.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/debugfs.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/msi.h>
-#include <linux/notifier.h>
-#include <linux/pci.h>
-#include <linux/string.h>
-
-#include <asm/eeh.h>
-#include <asm/eeh_event.h>
-#include <asm/io.h>
-#include <asm/iommu.h>
-#include <asm/msi_bitmap.h>
-#include <asm/opal.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc-pci.h>
-#include <asm/tce.h>
-
-#include "powernv.h"
-#include "pci.h"
-
-static int ioda_eeh_nb_init = 0;
-
-static int ioda_eeh_event(struct notifier_block *nb,
-			  unsigned long events, void *change)
-{
-	uint64_t changed_evts = (uint64_t)change;
-
-	/*
-	 * We simply send special EEH event if EEH has
-	 * been enabled, or clear pending events in
-	 * case that we enable EEH soon
-	 */
-	if (!(changed_evts & OPAL_EVENT_PCI_ERROR) ||
-	    !(events & OPAL_EVENT_PCI_ERROR))
-		return 0;
-
-	if (eeh_enabled())
-		eeh_send_failure_event(NULL);
-	else
-		opal_notifier_update_evt(OPAL_EVENT_PCI_ERROR, 0x0ul);
-
-	return 0;
-}
-
-static struct notifier_block ioda_eeh_nb = {
-	.notifier_call	= ioda_eeh_event,
-	.next		= NULL,
-	.priority	= 0
-};
-
-#ifdef CONFIG_DEBUG_FS
-static ssize_t ioda_eeh_ei_write(struct file *filp,
-				 const char __user *user_buf,
-				 size_t count, loff_t *ppos)
-{
-	struct pci_controller *hose = filp->private_data;
-	struct pnv_phb *phb = hose->private_data;
-	struct eeh_dev *edev;
-	struct eeh_pe *pe;
-	int pe_no, type, func;
-	unsigned long addr, mask;
-	char buf[50];
-	int ret;
-
-	if (!phb->eeh_ops || !phb->eeh_ops->err_inject)
-		return -ENXIO;
-
-	ret = simple_write_to_buffer(buf, sizeof(buf), ppos, user_buf, count);
-	if (!ret)
-		return -EFAULT;
-
-	/* Retrieve parameters */
-	ret = sscanf(buf, "%x:%x:%x:%lx:%lx",
-		     &pe_no, &type, &func, &addr, &mask);
-	if (ret != 5)
-		return -EINVAL;
-
-	/* Retrieve PE */
-	edev = kzalloc(sizeof(*edev), GFP_KERNEL);
-	if (!edev)
-		return -ENOMEM;
-	edev->phb = hose;
-	edev->pe_config_addr = pe_no;
-	pe = eeh_pe_get(edev);
-	kfree(edev);
-	if (!pe)
-		return -ENODEV;
-
-	/* Do error injection */
-	ret = phb->eeh_ops->err_inject(pe, type, func, addr, mask);
-	return ret < 0 ? ret : count;
-}
-
-static const struct file_operations ioda_eeh_ei_fops = {
-	.open   = simple_open,
-	.llseek = no_llseek,
-	.write  = ioda_eeh_ei_write,
-};
-
-static int ioda_eeh_dbgfs_set(void *data, int offset, u64 val)
-{
-	struct pci_controller *hose = data;
-	struct pnv_phb *phb = hose->private_data;
-
-	out_be64(phb->regs + offset, val);
-	return 0;
-}
-
-static int ioda_eeh_dbgfs_get(void *data, int offset, u64 *val)
-{
-	struct pci_controller *hose = data;
-	struct pnv_phb *phb = hose->private_data;
-
-	*val = in_be64(phb->regs + offset);
-	return 0;
-}
-
-static int ioda_eeh_outb_dbgfs_set(void *data, u64 val)
-{
-	return ioda_eeh_dbgfs_set(data, 0xD10, val);
-}
-
-static int ioda_eeh_outb_dbgfs_get(void *data, u64 *val)
-{
-	return ioda_eeh_dbgfs_get(data, 0xD10, val);
-}
-
-static int ioda_eeh_inbA_dbgfs_set(void *data, u64 val)
-{
-	return ioda_eeh_dbgfs_set(data, 0xD90, val);
-}
-
-static int ioda_eeh_inbA_dbgfs_get(void *data, u64 *val)
-{
-	return ioda_eeh_dbgfs_get(data, 0xD90, val);
-}
-
-static int ioda_eeh_inbB_dbgfs_set(void *data, u64 val)
-{
-	return ioda_eeh_dbgfs_set(data, 0xE10, val);
-}
-
-static int ioda_eeh_inbB_dbgfs_get(void *data, u64 *val)
-{
-	return ioda_eeh_dbgfs_get(data, 0xE10, val);
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_outb_dbgfs_ops, ioda_eeh_outb_dbgfs_get,
-			ioda_eeh_outb_dbgfs_set, "0x%llx\n");
-DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_inbA_dbgfs_ops, ioda_eeh_inbA_dbgfs_get,
-			ioda_eeh_inbA_dbgfs_set, "0x%llx\n");
-DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_inbB_dbgfs_ops, ioda_eeh_inbB_dbgfs_get,
-			ioda_eeh_inbB_dbgfs_set, "0x%llx\n");
-#endif /* CONFIG_DEBUG_FS */
-
-
-/**
- * ioda_eeh_post_init - Chip dependent post initialization
- * @hose: PCI controller
- *
- * The function will be called after eeh PEs and devices
- * have been built. That means the EEH is ready to supply
- * service with I/O cache.
- */
-static int ioda_eeh_post_init(struct pci_controller *hose)
-{
-	struct pnv_phb *phb = hose->private_data;
-	int ret;
-
-	/* Register OPAL event notifier */
-	if (!ioda_eeh_nb_init) {
-		ret = opal_notifier_register(&ioda_eeh_nb);
-		if (ret) {
-			pr_err("%s: Can't register OPAL event notifier (%d)\n",
-			       __func__, ret);
-			return ret;
-		}
-
-		ioda_eeh_nb_init = 1;
-	}
-
-#ifdef CONFIG_DEBUG_FS
-	if (!phb->has_dbgfs && phb->dbgfs) {
-		phb->has_dbgfs = 1;
-
-		debugfs_create_file("err_injct", 0200,
-				    phb->dbgfs, hose,
-				    &ioda_eeh_ei_fops);
-
-		debugfs_create_file("err_injct_outbound", 0600,
-				    phb->dbgfs, hose,
-				    &ioda_eeh_outb_dbgfs_ops);
-		debugfs_create_file("err_injct_inboundA", 0600,
-				    phb->dbgfs, hose,
-				    &ioda_eeh_inbA_dbgfs_ops);
-		debugfs_create_file("err_injct_inboundB", 0600,
-				    phb->dbgfs, hose,
-				    &ioda_eeh_inbB_dbgfs_ops);
-	}
-#endif
-
-	/* If EEH is enabled, we're going to rely on that.
-	 * Otherwise, we restore to conventional mechanism
-	 * to clear frozen PE during PCI config access.
-	 */
-	if (eeh_enabled())
-		phb->flags |= PNV_PHB_FLAG_EEH;
-	else
-		phb->flags &= ~PNV_PHB_FLAG_EEH;
-
-	return 0;
-}
-
-/**
- * ioda_eeh_set_option - Set EEH operation or I/O setting
- * @pe: EEH PE
- * @option: options
- *
- * Enable or disable EEH option for the indicated PE. The
- * function also can be used to enable I/O or DMA for the
- * PE.
- */
-static int ioda_eeh_set_option(struct eeh_pe *pe, int option)
-{
-	struct pci_controller *hose = pe->phb;
-	struct pnv_phb *phb = hose->private_data;
-	bool freeze_pe = false;
-	int enable, ret = 0;
-	s64 rc;
-
-	/* Check on PE number */
-	if (pe->addr < 0 || pe->addr >= phb->ioda.total_pe) {
-		pr_err("%s: PE address %x out of range [0, %x] "
-		       "on PHB#%x\n",
-			__func__, pe->addr, phb->ioda.total_pe,
-			hose->global_number);
-		return -EINVAL;
-	}
-
-	switch (option) {
-	case EEH_OPT_DISABLE:
-		return -EPERM;
-	case EEH_OPT_ENABLE:
-		return 0;
-	case EEH_OPT_THAW_MMIO:
-		enable = OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO;
-		break;
-	case EEH_OPT_THAW_DMA:
-		enable = OPAL_EEH_ACTION_CLEAR_FREEZE_DMA;
-		break;
-	case EEH_OPT_FREEZE_PE:
-		freeze_pe = true;
-		enable = OPAL_EEH_ACTION_SET_FREEZE_ALL;
-		break;
-	default:
-		pr_warn("%s: Invalid option %d\n",
-			__func__, option);
-		return -EINVAL;
-	}
-
-	/* If PHB supports compound PE, to handle it */
-	if (freeze_pe) {
-		if (phb->freeze_pe) {
-			phb->freeze_pe(phb, pe->addr);
-		} else {
-			rc = opal_pci_eeh_freeze_set(phb->opal_id,
-						     pe->addr,
-						     enable);
-			if (rc != OPAL_SUCCESS) {
-				pr_warn("%s: Failure %lld freezing "
-					"PHB#%x-PE#%x\n",
-					__func__, rc,
-					phb->hose->global_number, pe->addr);
-				ret = -EIO;
-			}
-		}
-	} else {
-		if (phb->unfreeze_pe) {
-			ret = phb->unfreeze_pe(phb, pe->addr, enable);
-		} else {
-			rc = opal_pci_eeh_freeze_clear(phb->opal_id,
-						       pe->addr,
-						       enable);
-			if (rc != OPAL_SUCCESS) {
-				pr_warn("%s: Failure %lld enable %d "
-					"for PHB#%x-PE#%x\n",
-					__func__, rc, option,
-					phb->hose->global_number, pe->addr);
-				ret = -EIO;
-			}
-		}
-	}
-
-	return ret;
-}
-
-static void ioda_eeh_phb_diag(struct eeh_pe *pe)
-{
-	struct pnv_phb *phb = pe->phb->private_data;
-	long rc;
-
-	rc = opal_pci_get_phb_diag_data2(phb->opal_id, pe->data,
-					 PNV_PCI_DIAG_BUF_SIZE);
-	if (rc != OPAL_SUCCESS)
-		pr_warn("%s: Failed to get diag-data for PHB#%x (%ld)\n",
-			__func__, pe->phb->global_number, rc);
-}
-
-static int ioda_eeh_get_phb_state(struct eeh_pe *pe)
-{
-	struct pnv_phb *phb = pe->phb->private_data;
-	u8 fstate;
-	__be16 pcierr;
-	s64 rc;
-	int result = 0;
-
-	rc = opal_pci_eeh_freeze_status(phb->opal_id,
-					pe->addr,
-					&fstate,
-					&pcierr,
-					NULL);
-	if (rc != OPAL_SUCCESS) {
-		pr_warn("%s: Failure %lld getting PHB#%x state\n",
-			__func__, rc, phb->hose->global_number);
-		return EEH_STATE_NOT_SUPPORT;
-	}
-
-	/*
-	 * Check PHB state. If the PHB is frozen for the
-	 * first time, to dump the PHB diag-data.
-	 */
-	if (be16_to_cpu(pcierr) != OPAL_EEH_PHB_ERROR) {
-		result = (EEH_STATE_MMIO_ACTIVE  |
-			  EEH_STATE_DMA_ACTIVE   |
-			  EEH_STATE_MMIO_ENABLED |
-			  EEH_STATE_DMA_ENABLED);
-	} else if (!(pe->state & EEH_PE_ISOLATED)) {
-		eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
-		ioda_eeh_phb_diag(pe);
-
-		if (eeh_has_flag(EEH_EARLY_DUMP_LOG))
-			pnv_pci_dump_phb_diag_data(pe->phb, pe->data);
-	}
-
-	return result;
-}
-
-static int ioda_eeh_get_pe_state(struct eeh_pe *pe)
-{
-	struct pnv_phb *phb = pe->phb->private_data;
-	u8 fstate;
-	__be16 pcierr;
-	s64 rc;
-	int result;
-
-	/*
-	 * We don't clobber hardware frozen state until PE
-	 * reset is completed. In order to keep EEH core
-	 * moving forward, we have to return operational
-	 * state during PE reset.
-	 */
-	if (pe->state & EEH_PE_RESET) {
-		result = (EEH_STATE_MMIO_ACTIVE  |
-			  EEH_STATE_DMA_ACTIVE   |
-			  EEH_STATE_MMIO_ENABLED |
-			  EEH_STATE_DMA_ENABLED);
-		return result;
-	}
-
-	/*
-	 * Fetch PE state from hardware. If the PHB
-	 * supports compound PE, let it handle that.
-	 */
-	if (phb->get_pe_state) {
-		fstate = phb->get_pe_state(phb, pe->addr);
-	} else {
-		rc = opal_pci_eeh_freeze_status(phb->opal_id,
-						pe->addr,
-						&fstate,
-						&pcierr,
-						NULL);
-		if (rc != OPAL_SUCCESS) {
-			pr_warn("%s: Failure %lld getting PHB#%x-PE%x state\n",
-				__func__, rc, phb->hose->global_number, pe->addr);
-			return EEH_STATE_NOT_SUPPORT;
-		}
-	}
-
-	/* Figure out state */
-	switch (fstate) {
-	case OPAL_EEH_STOPPED_NOT_FROZEN:
-		result = (EEH_STATE_MMIO_ACTIVE  |
-			  EEH_STATE_DMA_ACTIVE   |
-			  EEH_STATE_MMIO_ENABLED |
-			  EEH_STATE_DMA_ENABLED);
-		break;
-	case OPAL_EEH_STOPPED_MMIO_FREEZE:
-		result = (EEH_STATE_DMA_ACTIVE |
-			  EEH_STATE_DMA_ENABLED);
-		break;
-	case OPAL_EEH_STOPPED_DMA_FREEZE:
-		result = (EEH_STATE_MMIO_ACTIVE |
-			  EEH_STATE_MMIO_ENABLED);
-		break;
-	case OPAL_EEH_STOPPED_MMIO_DMA_FREEZE:
-		result = 0;
-		break;
-	case OPAL_EEH_STOPPED_RESET:
-		result = EEH_STATE_RESET_ACTIVE;
-		break;
-	case OPAL_EEH_STOPPED_TEMP_UNAVAIL:
-		result = EEH_STATE_UNAVAILABLE;
-		break;
-	case OPAL_EEH_STOPPED_PERM_UNAVAIL:
-		result = EEH_STATE_NOT_SUPPORT;
-		break;
-	default:
-		result = EEH_STATE_NOT_SUPPORT;
-		pr_warn("%s: Invalid PHB#%x-PE#%x state %x\n",
-			__func__, phb->hose->global_number,
-			pe->addr, fstate);
-	}
-
-	/*
-	 * If PHB supports compound PE, to freeze all
-	 * slave PEs for consistency.
-	 *
-	 * If the PE is switching to frozen state for the
-	 * first time, to dump the PHB diag-data.
-	 */
-	if (!(result & EEH_STATE_NOT_SUPPORT) &&
-	    !(result & EEH_STATE_UNAVAILABLE) &&
-	    !(result & EEH_STATE_MMIO_ACTIVE) &&
-	    !(result & EEH_STATE_DMA_ACTIVE)  &&
-	    !(pe->state & EEH_PE_ISOLATED)) {
-		if (phb->freeze_pe)
-			phb->freeze_pe(phb, pe->addr);
-
-		eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
-		ioda_eeh_phb_diag(pe);
-
-		if (eeh_has_flag(EEH_EARLY_DUMP_LOG))
-			pnv_pci_dump_phb_diag_data(pe->phb, pe->data);
-	}
-
-	return result;
-}
-
-/**
- * ioda_eeh_get_state - Retrieve the state of PE
- * @pe: EEH PE
- *
- * The PE's state should be retrieved from the PEEV, PEST
- * IODA tables. Since the OPAL has exported the function
- * to do it, it'd better to use that.
- */
-static int ioda_eeh_get_state(struct eeh_pe *pe)
-{
-	struct pnv_phb *phb = pe->phb->private_data;
-
-	/* Sanity check on PE number. PHB PE should have 0 */
-	if (pe->addr < 0 ||
-	    pe->addr >= phb->ioda.total_pe) {
-		pr_warn("%s: PHB#%x-PE#%x out of range [0, %x]\n",
-			__func__, phb->hose->global_number,
-			pe->addr, phb->ioda.total_pe);
-		return EEH_STATE_NOT_SUPPORT;
-	}
-
-	if (pe->type & EEH_PE_PHB)
-		return ioda_eeh_get_phb_state(pe);
-
-	return ioda_eeh_get_pe_state(pe);
-}
-
-static s64 ioda_eeh_phb_poll(struct pnv_phb *phb)
-{
-	s64 rc = OPAL_HARDWARE;
-
-	while (1) {
-		rc = opal_pci_poll(phb->opal_id);
-		if (rc <= 0)
-			break;
-
-		if (system_state < SYSTEM_RUNNING)
-			udelay(1000 * rc);
-		else
-			msleep(rc);
-	}
-
-	return rc;
-}
-
-int ioda_eeh_phb_reset(struct pci_controller *hose, int option)
-{
-	struct pnv_phb *phb = hose->private_data;
-	s64 rc = OPAL_HARDWARE;
-
-	pr_debug("%s: Reset PHB#%x, option=%d\n",
-		 __func__, hose->global_number, option);
-
-	/* Issue PHB complete reset request */
-	if (option == EEH_RESET_FUNDAMENTAL ||
-	    option == EEH_RESET_HOT)
-		rc = opal_pci_reset(phb->opal_id,
-				OPAL_RESET_PHB_COMPLETE,
-				OPAL_ASSERT_RESET);
-	else if (option == EEH_RESET_DEACTIVATE)
-		rc = opal_pci_reset(phb->opal_id,
-				OPAL_RESET_PHB_COMPLETE,
-				OPAL_DEASSERT_RESET);
-	if (rc < 0)
-		goto out;
-
-	/*
-	 * Poll state of the PHB until the request is done
-	 * successfully. The PHB reset is usually PHB complete
-	 * reset followed by hot reset on root bus. So we also
-	 * need the PCI bus settlement delay.
-	 */
-	rc = ioda_eeh_phb_poll(phb);
-	if (option == EEH_RESET_DEACTIVATE) {
-		if (system_state < SYSTEM_RUNNING)
-			udelay(1000 * EEH_PE_RST_SETTLE_TIME);
-		else
-			msleep(EEH_PE_RST_SETTLE_TIME);
-	}
-out:
-	if (rc != OPAL_SUCCESS)
-		return -EIO;
-
-	return 0;
-}
-
-static int ioda_eeh_root_reset(struct pci_controller *hose, int option)
-{
-	struct pnv_phb *phb = hose->private_data;
-	s64 rc = OPAL_SUCCESS;
-
-	pr_debug("%s: Reset PHB#%x, option=%d\n",
-		 __func__, hose->global_number, option);
-
-	/*
-	 * During the reset deassert time, we needn't care
-	 * the reset scope because the firmware does nothing
-	 * for fundamental or hot reset during deassert phase.
-	 */
-	if (option == EEH_RESET_FUNDAMENTAL)
-		rc = opal_pci_reset(phb->opal_id,
-				OPAL_RESET_PCI_FUNDAMENTAL,
-				OPAL_ASSERT_RESET);
-	else if (option == EEH_RESET_HOT)
-		rc = opal_pci_reset(phb->opal_id,
-				OPAL_RESET_PCI_HOT,
-				OPAL_ASSERT_RESET);
-	else if (option == EEH_RESET_DEACTIVATE)
-		rc = opal_pci_reset(phb->opal_id,
-				OPAL_RESET_PCI_HOT,
-				OPAL_DEASSERT_RESET);
-	if (rc < 0)
-		goto out;
-
-	/* Poll state of the PHB until the request is done */
-	rc = ioda_eeh_phb_poll(phb);
-	if (option == EEH_RESET_DEACTIVATE)
-		msleep(EEH_PE_RST_SETTLE_TIME);
-out:
-	if (rc != OPAL_SUCCESS)
-		return -EIO;
-
-	return 0;
-}
-
-static int ioda_eeh_bridge_reset(struct pci_dev *dev, int option)
-
-{
-	struct device_node *dn = pci_device_to_OF_node(dev);
-	struct eeh_dev *edev = of_node_to_eeh_dev(dn);
-	int aer = edev ? edev->aer_cap : 0;
-	u32 ctrl;
-
-	pr_debug("%s: Reset PCI bus %04x:%02x with option %d\n",
-		 __func__, pci_domain_nr(dev->bus),
-		 dev->bus->number, option);
-
-	switch (option) {
-	case EEH_RESET_FUNDAMENTAL:
-	case EEH_RESET_HOT:
-		/* Don't report linkDown event */
-		if (aer) {
-			eeh_ops->read_config(dn, aer + PCI_ERR_UNCOR_MASK,
-					     4, &ctrl);
-			ctrl |= PCI_ERR_UNC_SURPDN;
-                        eeh_ops->write_config(dn, aer + PCI_ERR_UNCOR_MASK,
-					      4, ctrl);
-                }
-
-		eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &ctrl);
-		ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
-		eeh_ops->write_config(dn, PCI_BRIDGE_CONTROL, 2, ctrl);
-		msleep(EEH_PE_RST_HOLD_TIME);
-
-		break;
-	case EEH_RESET_DEACTIVATE:
-		eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &ctrl);
-		ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
-		eeh_ops->write_config(dn, PCI_BRIDGE_CONTROL, 2, ctrl);
-		msleep(EEH_PE_RST_SETTLE_TIME);
-
-		/* Continue reporting linkDown event */
-		if (aer) {
-			eeh_ops->read_config(dn, aer + PCI_ERR_UNCOR_MASK,
-					     4, &ctrl);
-			ctrl &= ~PCI_ERR_UNC_SURPDN;
-			eeh_ops->write_config(dn, aer + PCI_ERR_UNCOR_MASK,
-					      4, ctrl);
-		}
-
-		break;
-	}
-
-	return 0;
-}
-
-void pnv_pci_reset_secondary_bus(struct pci_dev *dev)
-{
-	struct pci_controller *hose;
-
-	if (pci_is_root_bus(dev->bus)) {
-		hose = pci_bus_to_host(dev->bus);
-		ioda_eeh_root_reset(hose, EEH_RESET_HOT);
-		ioda_eeh_root_reset(hose, EEH_RESET_DEACTIVATE);
-	} else {
-		ioda_eeh_bridge_reset(dev, EEH_RESET_HOT);
-		ioda_eeh_bridge_reset(dev, EEH_RESET_DEACTIVATE);
-	}
-}
-
-/**
- * ioda_eeh_reset - Reset the indicated PE
- * @pe: EEH PE
- * @option: reset option
- *
- * Do reset on the indicated PE. For PCI bus sensitive PE,
- * we need to reset the parent p2p bridge. The PHB has to
- * be reinitialized if the p2p bridge is root bridge. For
- * PCI device sensitive PE, we will try to reset the device
- * through FLR. For now, we don't have OPAL APIs to do HARD
- * reset yet, so all reset would be SOFT (HOT) reset.
- */
-static int ioda_eeh_reset(struct eeh_pe *pe, int option)
-{
-	struct pci_controller *hose = pe->phb;
-	struct pci_bus *bus;
-	int ret;
-
-	/*
-	 * For PHB reset, we always have complete reset. For those PEs whose
-	 * primary bus derived from root complex (root bus) or root port
-	 * (usually bus#1), we apply hot or fundamental reset on the root port.
-	 * For other PEs, we always have hot reset on the PE primary bus.
-	 *
-	 * Here, we have different design to pHyp, which always clear the
-	 * frozen state during PE reset. However, the good idea here from
-	 * benh is to keep frozen state before we get PE reset done completely
-	 * (until BAR restore). With the frozen state, HW drops illegal IO
-	 * or MMIO access, which can incur recrusive frozen PE during PE
-	 * reset. The side effect is that EEH core has to clear the frozen
-	 * state explicitly after BAR restore.
-	 */
-	if (pe->type & EEH_PE_PHB) {
-		ret = ioda_eeh_phb_reset(hose, option);
-	} else {
-		struct pnv_phb *phb;
-		s64 rc;
-
-		/*
-		 * The frozen PE might be caused by PAPR error injection
-		 * registers, which are expected to be cleared after hitting
-		 * frozen PE as stated in the hardware spec. Unfortunately,
-		 * that's not true on P7IOC. So we have to clear it manually
-		 * to avoid recursive EEH errors during recovery.
-		 */
-		phb = hose->private_data;
-		if (phb->model == PNV_PHB_MODEL_P7IOC &&
-		    (option == EEH_RESET_HOT ||
-		    option == EEH_RESET_FUNDAMENTAL)) {
-			rc = opal_pci_reset(phb->opal_id,
-					    OPAL_RESET_PHB_ERROR,
-					    OPAL_ASSERT_RESET);
-			if (rc != OPAL_SUCCESS) {
-				pr_warn("%s: Failure %lld clearing "
-					"error injection registers\n",
-					__func__, rc);
-				return -EIO;
-			}
-		}
-
-		bus = eeh_pe_bus_get(pe);
-		if (pci_is_root_bus(bus) ||
-		    pci_is_root_bus(bus->parent))
-			ret = ioda_eeh_root_reset(hose, option);
-		else
-			ret = ioda_eeh_bridge_reset(bus->self, option);
-	}
-
-	return ret;
-}
-
-/**
- * ioda_eeh_get_log - Retrieve error log
- * @pe: frozen PE
- * @severity: permanent or temporary error
- * @drv_log: device driver log
- * @len: length of device driver log
- *
- * Retrieve error log, which contains log from device driver
- * and firmware.
- */
-static int ioda_eeh_get_log(struct eeh_pe *pe, int severity,
-			    char *drv_log, unsigned long len)
-{
-	if (!eeh_has_flag(EEH_EARLY_DUMP_LOG))
-		pnv_pci_dump_phb_diag_data(pe->phb, pe->data);
-
-	return 0;
-}
-
-/**
- * ioda_eeh_configure_bridge - Configure the PCI bridges for the indicated PE
- * @pe: EEH PE
- *
- * For particular PE, it might have included PCI bridges. In order
- * to make the PE work properly, those PCI bridges should be configured
- * correctly. However, we need do nothing on P7IOC since the reset
- * function will do everything that should be covered by the function.
- */
-static int ioda_eeh_configure_bridge(struct eeh_pe *pe)
-{
-	return 0;
-}
-
-static int ioda_eeh_err_inject(struct eeh_pe *pe, int type, int func,
-			       unsigned long addr, unsigned long mask)
-{
-	struct pci_controller *hose = pe->phb;
-	struct pnv_phb *phb = hose->private_data;
-	s64 ret;
-
-	/* Sanity check on error type */
-	if (type != OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR &&
-	    type != OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR64) {
-		pr_warn("%s: Invalid error type %d\n",
-			__func__, type);
-		return -ERANGE;
-	}
-
-	if (func < OPAL_ERR_INJECT_FUNC_IOA_LD_MEM_ADDR ||
-	    func > OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_TARGET) {
-		pr_warn("%s: Invalid error function %d\n",
-			__func__, func);
-		return -ERANGE;
-	}
-
-	/* Firmware supports error injection ? */
-	if (!opal_check_token(OPAL_PCI_ERR_INJECT)) {
-		pr_warn("%s: Firmware doesn't support error injection\n",
-			__func__);
-		return -ENXIO;
-	}
-
-	/* Do error injection */
-	ret = opal_pci_err_inject(phb->opal_id, pe->addr,
-				  type, func, addr, mask);
-	if (ret != OPAL_SUCCESS) {
-		pr_warn("%s: Failure %lld injecting error "
-			"%d-%d to PHB#%x-PE#%x\n",
-			__func__, ret, type, func,
-			hose->global_number, pe->addr);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static void ioda_eeh_hub_diag_common(struct OpalIoP7IOCErrorData *data)
-{
-	/* GEM */
-	if (data->gemXfir || data->gemRfir ||
-	    data->gemRirqfir || data->gemMask || data->gemRwof)
-		pr_info("  GEM: %016llx %016llx %016llx %016llx %016llx\n",
-			be64_to_cpu(data->gemXfir),
-			be64_to_cpu(data->gemRfir),
-			be64_to_cpu(data->gemRirqfir),
-			be64_to_cpu(data->gemMask),
-			be64_to_cpu(data->gemRwof));
-
-	/* LEM */
-	if (data->lemFir || data->lemErrMask ||
-	    data->lemAction0 || data->lemAction1 || data->lemWof)
-		pr_info("  LEM: %016llx %016llx %016llx %016llx %016llx\n",
-			be64_to_cpu(data->lemFir),
-			be64_to_cpu(data->lemErrMask),
-			be64_to_cpu(data->lemAction0),
-			be64_to_cpu(data->lemAction1),
-			be64_to_cpu(data->lemWof));
-}
-
-static void ioda_eeh_hub_diag(struct pci_controller *hose)
-{
-	struct pnv_phb *phb = hose->private_data;
-	struct OpalIoP7IOCErrorData *data = &phb->diag.hub_diag;
-	long rc;
-
-	rc = opal_pci_get_hub_diag_data(phb->hub_id, data, sizeof(*data));
-	if (rc != OPAL_SUCCESS) {
-		pr_warn("%s: Failed to get HUB#%llx diag-data (%ld)\n",
-			__func__, phb->hub_id, rc);
-		return;
-	}
-
-	switch (data->type) {
-	case OPAL_P7IOC_DIAG_TYPE_RGC:
-		pr_info("P7IOC diag-data for RGC\n\n");
-		ioda_eeh_hub_diag_common(data);
-		if (data->rgc.rgcStatus || data->rgc.rgcLdcp)
-			pr_info("  RGC: %016llx %016llx\n",
-				be64_to_cpu(data->rgc.rgcStatus),
-				be64_to_cpu(data->rgc.rgcLdcp));
-		break;
-	case OPAL_P7IOC_DIAG_TYPE_BI:
-		pr_info("P7IOC diag-data for BI %s\n\n",
-			data->bi.biDownbound ? "Downbound" : "Upbound");
-		ioda_eeh_hub_diag_common(data);
-		if (data->bi.biLdcp0 || data->bi.biLdcp1 ||
-		    data->bi.biLdcp2 || data->bi.biFenceStatus)
-			pr_info("  BI:  %016llx %016llx %016llx %016llx\n",
-				be64_to_cpu(data->bi.biLdcp0),
-				be64_to_cpu(data->bi.biLdcp1),
-				be64_to_cpu(data->bi.biLdcp2),
-				be64_to_cpu(data->bi.biFenceStatus));
-		break;
-	case OPAL_P7IOC_DIAG_TYPE_CI:
-		pr_info("P7IOC diag-data for CI Port %d\n\n",
-			data->ci.ciPort);
-		ioda_eeh_hub_diag_common(data);
-		if (data->ci.ciPortStatus || data->ci.ciPortLdcp)
-			pr_info("  CI:  %016llx %016llx\n",
-				be64_to_cpu(data->ci.ciPortStatus),
-				be64_to_cpu(data->ci.ciPortLdcp));
-		break;
-	case OPAL_P7IOC_DIAG_TYPE_MISC:
-		pr_info("P7IOC diag-data for MISC\n\n");
-		ioda_eeh_hub_diag_common(data);
-		break;
-	case OPAL_P7IOC_DIAG_TYPE_I2C:
-		pr_info("P7IOC diag-data for I2C\n\n");
-		ioda_eeh_hub_diag_common(data);
-		break;
-	default:
-		pr_warn("%s: Invalid type of HUB#%llx diag-data (%d)\n",
-			__func__, phb->hub_id, data->type);
-	}
-}
-
-static int ioda_eeh_get_pe(struct pci_controller *hose,
-			   u16 pe_no, struct eeh_pe **pe)
-{
-	struct pnv_phb *phb = hose->private_data;
-	struct pnv_ioda_pe *pnv_pe;
-	struct eeh_pe *dev_pe;
-	struct eeh_dev edev;
-
-	/*
-	 * If PHB supports compound PE, to fetch
-	 * the master PE because slave PE is invisible
-	 * to EEH core.
-	 */
-	pnv_pe = &phb->ioda.pe_array[pe_no];
-	if (pnv_pe->flags & PNV_IODA_PE_SLAVE) {
-		pnv_pe = pnv_pe->master;
-		WARN_ON(!pnv_pe ||
-			!(pnv_pe->flags & PNV_IODA_PE_MASTER));
-		pe_no = pnv_pe->pe_number;
-	}
-
-	/* Find the PE according to PE# */
-	memset(&edev, 0, sizeof(struct eeh_dev));
-	edev.phb = hose;
-	edev.pe_config_addr = pe_no;
-	dev_pe = eeh_pe_get(&edev);
-	if (!dev_pe)
-		return -EEXIST;
-
-	/* Freeze the (compound) PE */
-	*pe = dev_pe;
-	if (!(dev_pe->state & EEH_PE_ISOLATED))
-		phb->freeze_pe(phb, pe_no);
-
-	/*
-	 * At this point, we're sure the (compound) PE should
-	 * have been frozen. However, we still need poke until
-	 * hitting the frozen PE on top level.
-	 */
-	dev_pe = dev_pe->parent;
-	while (dev_pe && !(dev_pe->type & EEH_PE_PHB)) {
-		int ret;
-		int active_flags = (EEH_STATE_MMIO_ACTIVE |
-				    EEH_STATE_DMA_ACTIVE);
-
-		ret = eeh_ops->get_state(dev_pe, NULL);
-		if (ret <= 0 || (ret & active_flags) == active_flags) {
-			dev_pe = dev_pe->parent;
-			continue;
-		}
-
-		/* Frozen parent PE */
-		*pe = dev_pe;
-		if (!(dev_pe->state & EEH_PE_ISOLATED))
-			phb->freeze_pe(phb, dev_pe->addr);
-
-		/* Next one */
-		dev_pe = dev_pe->parent;
-	}
-
-	return 0;
-}
-
-/**
- * ioda_eeh_next_error - Retrieve next error for EEH core to handle
- * @pe: The affected PE
- *
- * The function is expected to be called by EEH core while it gets
- * special EEH event (without binding PE). The function calls to
- * OPAL APIs for next error to handle. The informational error is
- * handled internally by platform. However, the dead IOC, dead PHB,
- * fenced PHB and frozen PE should be handled by EEH core eventually.
- */
-static int ioda_eeh_next_error(struct eeh_pe **pe)
-{
-	struct pci_controller *hose;
-	struct pnv_phb *phb;
-	struct eeh_pe *phb_pe, *parent_pe;
-	__be64 frozen_pe_no;
-	__be16 err_type, severity;
-	int active_flags = (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE);
-	long rc;
-	int state, ret = EEH_NEXT_ERR_NONE;
-
-	/*
-	 * While running here, it's safe to purge the event queue.
-	 * And we should keep the cached OPAL notifier event sychronized
-	 * between the kernel and firmware.
-	 */
-	eeh_remove_event(NULL, false);
-	opal_notifier_update_evt(OPAL_EVENT_PCI_ERROR, 0x0ul);
-
-	list_for_each_entry(hose, &hose_list, list_node) {
-		/*
-		 * If the subordinate PCI buses of the PHB has been
-		 * removed or is exactly under error recovery, we
-		 * needn't take care of it any more.
-		 */
-		phb = hose->private_data;
-		phb_pe = eeh_phb_pe_get(hose);
-		if (!phb_pe || (phb_pe->state & EEH_PE_ISOLATED))
-			continue;
-
-		rc = opal_pci_next_error(phb->opal_id,
-				&frozen_pe_no, &err_type, &severity);
-
-		/* If OPAL API returns error, we needn't proceed */
-		if (rc != OPAL_SUCCESS) {
-			pr_devel("%s: Invalid return value on "
-				 "PHB#%x (0x%lx) from opal_pci_next_error",
-				 __func__, hose->global_number, rc);
-			continue;
-		}
-
-		/* If the PHB doesn't have error, stop processing */
-		if (be16_to_cpu(err_type) == OPAL_EEH_NO_ERROR ||
-		    be16_to_cpu(severity) == OPAL_EEH_SEV_NO_ERROR) {
-			pr_devel("%s: No error found on PHB#%x\n",
-				 __func__, hose->global_number);
-			continue;
-		}
-
-		/*
-		 * Processing the error. We're expecting the error with
-		 * highest priority reported upon multiple errors on the
-		 * specific PHB.
-		 */
-		pr_devel("%s: Error (%d, %d, %llu) on PHB#%x\n",
-			 __func__, be16_to_cpu(err_type), be16_to_cpu(severity),
-			 be64_to_cpu(frozen_pe_no), hose->global_number);
-		switch (be16_to_cpu(err_type)) {
-		case OPAL_EEH_IOC_ERROR:
-			if (be16_to_cpu(severity) == OPAL_EEH_SEV_IOC_DEAD) {
-				pr_err("EEH: dead IOC detected\n");
-				ret = EEH_NEXT_ERR_DEAD_IOC;
-			} else if (be16_to_cpu(severity) == OPAL_EEH_SEV_INF) {
-				pr_info("EEH: IOC informative error "
-					"detected\n");
-				ioda_eeh_hub_diag(hose);
-				ret = EEH_NEXT_ERR_NONE;
-			}
-
-			break;
-		case OPAL_EEH_PHB_ERROR:
-			if (be16_to_cpu(severity) == OPAL_EEH_SEV_PHB_DEAD) {
-				*pe = phb_pe;
-				pr_err("EEH: dead PHB#%x detected, "
-				       "location: %s\n",
-				       hose->global_number,
-				       eeh_pe_loc_get(phb_pe));
-				ret = EEH_NEXT_ERR_DEAD_PHB;
-			} else if (be16_to_cpu(severity) ==
-						OPAL_EEH_SEV_PHB_FENCED) {
-				*pe = phb_pe;
-				pr_err("EEH: Fenced PHB#%x detected, "
-				       "location: %s\n",
-				       hose->global_number,
-				       eeh_pe_loc_get(phb_pe));
-				ret = EEH_NEXT_ERR_FENCED_PHB;
-			} else if (be16_to_cpu(severity) == OPAL_EEH_SEV_INF) {
-				pr_info("EEH: PHB#%x informative error "
-					"detected, location: %s\n",
-					hose->global_number,
-					eeh_pe_loc_get(phb_pe));
-				ioda_eeh_phb_diag(phb_pe);
-				pnv_pci_dump_phb_diag_data(hose, phb_pe->data);
-				ret = EEH_NEXT_ERR_NONE;
-			}
-
-			break;
-		case OPAL_EEH_PE_ERROR:
-			/*
-			 * If we can't find the corresponding PE, we
-			 * just try to unfreeze.
-			 */
-			if (ioda_eeh_get_pe(hose,
-					    be64_to_cpu(frozen_pe_no), pe)) {
-				/* Try best to clear it */
-				pr_info("EEH: Clear non-existing PHB#%x-PE#%llx\n",
-					hose->global_number, frozen_pe_no);
-				pr_info("EEH: PHB location: %s\n",
-					eeh_pe_loc_get(phb_pe));
-				opal_pci_eeh_freeze_clear(phb->opal_id, frozen_pe_no,
-					OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
-				ret = EEH_NEXT_ERR_NONE;
-			} else if ((*pe)->state & EEH_PE_ISOLATED ||
-				   eeh_pe_passed(*pe)) {
-				ret = EEH_NEXT_ERR_NONE;
-			} else {
-				pr_err("EEH: Frozen PE#%x on PHB#%x detected\n",
-					(*pe)->addr, (*pe)->phb->global_number);
-				pr_err("EEH: PE location: %s, PHB location: %s\n",
-					eeh_pe_loc_get(*pe), eeh_pe_loc_get(phb_pe));
-				ret = EEH_NEXT_ERR_FROZEN_PE;
-			}
-
-			break;
-		default:
-			pr_warn("%s: Unexpected error type %d\n",
-				__func__, be16_to_cpu(err_type));
-		}
-
-		/*
-		 * EEH core will try recover from fenced PHB or
-		 * frozen PE. In the time for frozen PE, EEH core
-		 * enable IO path for that before collecting logs,
-		 * but it ruins the site. So we have to dump the
-		 * log in advance here.
-		 */
-		if ((ret == EEH_NEXT_ERR_FROZEN_PE  ||
-		    ret == EEH_NEXT_ERR_FENCED_PHB) &&
-		    !((*pe)->state & EEH_PE_ISOLATED)) {
-			eeh_pe_state_mark(*pe, EEH_PE_ISOLATED);
-			ioda_eeh_phb_diag(*pe);
-
-			if (eeh_has_flag(EEH_EARLY_DUMP_LOG))
-				pnv_pci_dump_phb_diag_data((*pe)->phb,
-							   (*pe)->data);
-		}
-
-		/*
-		 * We probably have the frozen parent PE out there and
-		 * we need have to handle frozen parent PE firstly.
-		 */
-		if (ret == EEH_NEXT_ERR_FROZEN_PE) {
-			parent_pe = (*pe)->parent;
-			while (parent_pe) {
-				/* Hit the ceiling ? */
-				if (parent_pe->type & EEH_PE_PHB)
-					break;
-
-				/* Frozen parent PE ? */
-				state = ioda_eeh_get_state(parent_pe);
-				if (state > 0 &&
-				    (state & active_flags) != active_flags)
-					*pe = parent_pe;
-
-				/* Next parent level */
-				parent_pe = parent_pe->parent;
-			}
-
-			/* We possibly migrate to another PE */
-			eeh_pe_state_mark(*pe, EEH_PE_ISOLATED);
-		}
-
-		/*
-		 * If we have no errors on the specific PHB or only
-		 * informative error there, we continue poking it.
-		 * Otherwise, we need actions to be taken by upper
-		 * layer.
-		 */
-		if (ret > EEH_NEXT_ERR_INF)
-			break;
-	}
-
-	return ret;
-}
-
-struct pnv_eeh_ops ioda_eeh_ops = {
-	.post_init		= ioda_eeh_post_init,
-	.set_option		= ioda_eeh_set_option,
-	.get_state		= ioda_eeh_get_state,
-	.reset			= ioda_eeh_reset,
-	.get_log		= ioda_eeh_get_log,
-	.configure_bridge	= ioda_eeh_configure_bridge,
-	.err_inject		= ioda_eeh_err_inject,
-	.next_error		= ioda_eeh_next_error
-};
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index e261869adc86..ce738ab3d5a9 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -12,6 +12,7 @@
  */
 
 #include <linux/atomic.h>
+#include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/export.h>
 #include <linux/init.h>
@@ -38,12 +39,14 @@
 #include "powernv.h"
 #include "pci.h"
 
+static bool pnv_eeh_nb_init = false;
+
 /**
- * powernv_eeh_init - EEH platform dependent initialization
+ * pnv_eeh_init - EEH platform dependent initialization
  *
  * EEH platform dependent initialization on powernv
  */
-static int powernv_eeh_init(void)
+static int pnv_eeh_init(void)
 {
 	struct pci_controller *hose;
 	struct pnv_phb *phb;
@@ -85,37 +88,280 @@ static int powernv_eeh_init(void)
 	return 0;
 }
 
+static int pnv_eeh_event(struct notifier_block *nb,
+			 unsigned long events, void *change)
+{
+	uint64_t changed_evts = (uint64_t)change;
+
+	/*
+	 * We simply send special EEH event if EEH has
+	 * been enabled, or clear pending events in
+	 * case that we enable EEH soon
+	 */
+	if (!(changed_evts & OPAL_EVENT_PCI_ERROR) ||
+	    !(events & OPAL_EVENT_PCI_ERROR))
+		return 0;
+
+	if (eeh_enabled())
+		eeh_send_failure_event(NULL);
+	else
+		opal_notifier_update_evt(OPAL_EVENT_PCI_ERROR, 0x0ul);
+
+	return 0;
+}
+
+static struct notifier_block pnv_eeh_nb = {
+	.notifier_call	= pnv_eeh_event,
+	.next		= NULL,
+	.priority	= 0
+};
+
+#ifdef CONFIG_DEBUG_FS
+static ssize_t pnv_eeh_ei_write(struct file *filp,
+				const char __user *user_buf,
+				size_t count, loff_t *ppos)
+{
+	struct pci_controller *hose = filp->private_data;
+	struct eeh_dev *edev;
+	struct eeh_pe *pe;
+	int pe_no, type, func;
+	unsigned long addr, mask;
+	char buf[50];
+	int ret;
+
+	if (!eeh_ops || !eeh_ops->err_inject)
+		return -ENXIO;
+
+	/* Copy over argument buffer */
+	ret = simple_write_to_buffer(buf, sizeof(buf), ppos, user_buf, count);
+	if (!ret)
+		return -EFAULT;
+
+	/* Retrieve parameters */
+	ret = sscanf(buf, "%x:%x:%x:%lx:%lx",
+		     &pe_no, &type, &func, &addr, &mask);
+	if (ret != 5)
+		return -EINVAL;
+
+	/* Retrieve PE */
+	edev = kzalloc(sizeof(*edev), GFP_KERNEL);
+	if (!edev)
+		return -ENOMEM;
+	edev->phb = hose;
+	edev->pe_config_addr = pe_no;
+	pe = eeh_pe_get(edev);
+	kfree(edev);
+	if (!pe)
+		return -ENODEV;
+
+	/* Do error injection */
+	ret = eeh_ops->err_inject(pe, type, func, addr, mask);
+	return ret < 0 ? ret : count;
+}
+
+static const struct file_operations pnv_eeh_ei_fops = {
+	.open	= simple_open,
+	.llseek	= no_llseek,
+	.write	= pnv_eeh_ei_write,
+};
+
+static int pnv_eeh_dbgfs_set(void *data, int offset, u64 val)
+{
+	struct pci_controller *hose = data;
+	struct pnv_phb *phb = hose->private_data;
+
+	out_be64(phb->regs + offset, val);
+	return 0;
+}
+
+static int pnv_eeh_dbgfs_get(void *data, int offset, u64 *val)
+{
+	struct pci_controller *hose = data;
+	struct pnv_phb *phb = hose->private_data;
+
+	*val = in_be64(phb->regs + offset);
+	return 0;
+}
+
+static int pnv_eeh_outb_dbgfs_set(void *data, u64 val)
+{
+	return pnv_eeh_dbgfs_set(data, 0xD10, val);
+}
+
+static int pnv_eeh_outb_dbgfs_get(void *data, u64 *val)
+{
+	return pnv_eeh_dbgfs_get(data, 0xD10, val);
+}
+
+static int pnv_eeh_inbA_dbgfs_set(void *data, u64 val)
+{
+	return pnv_eeh_dbgfs_set(data, 0xD90, val);
+}
+
+static int pnv_eeh_inbA_dbgfs_get(void *data, u64 *val)
+{
+	return pnv_eeh_dbgfs_get(data, 0xD90, val);
+}
+
+static int pnv_eeh_inbB_dbgfs_set(void *data, u64 val)
+{
+	return pnv_eeh_dbgfs_set(data, 0xE10, val);
+}
+
+static int pnv_eeh_inbB_dbgfs_get(void *data, u64 *val)
+{
+	return pnv_eeh_dbgfs_get(data, 0xE10, val);
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(pnv_eeh_outb_dbgfs_ops, pnv_eeh_outb_dbgfs_get,
+			pnv_eeh_outb_dbgfs_set, "0x%llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(pnv_eeh_inbA_dbgfs_ops, pnv_eeh_inbA_dbgfs_get,
+			pnv_eeh_inbA_dbgfs_set, "0x%llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(pnv_eeh_inbB_dbgfs_ops, pnv_eeh_inbB_dbgfs_get,
+			pnv_eeh_inbB_dbgfs_set, "0x%llx\n");
+#endif /* CONFIG_DEBUG_FS */
+
 /**
- * powernv_eeh_post_init - EEH platform dependent post initialization
+ * pnv_eeh_post_init - EEH platform dependent post initialization
  *
  * EEH platform dependent post initialization on powernv. When
  * the function is called, the EEH PEs and devices should have
  * been built. If the I/O cache staff has been built, EEH is
  * ready to supply service.
  */
-static int powernv_eeh_post_init(void)
+static int pnv_eeh_post_init(void)
 {
 	struct pci_controller *hose;
 	struct pnv_phb *phb;
 	int ret = 0;
 
+	/* Register OPAL event notifier */
+	if (!pnv_eeh_nb_init) {
+		ret = opal_notifier_register(&pnv_eeh_nb);
+		if (ret) {
+			pr_warn("%s: Can't register OPAL event notifier (%d)\n",
+				__func__, ret);
+			return ret;
+		}
+
+		pnv_eeh_nb_init = true;
+	}
+
 	list_for_each_entry(hose, &hose_list, list_node) {
 		phb = hose->private_data;
 
-		if (phb->eeh_ops && phb->eeh_ops->post_init) {
-			ret = phb->eeh_ops->post_init(hose);
-			if (ret)
-				break;
-		}
+		/*
+		 * If EEH is enabled, we're going to rely on that.
+		 * Otherwise, we restore to conventional mechanism
+		 * to clear frozen PE during PCI config access.
+		 */
+		if (eeh_enabled())
+			phb->flags |= PNV_PHB_FLAG_EEH;
+		else
+			phb->flags &= ~PNV_PHB_FLAG_EEH;
+
+		/* Create debugfs entries */
+#ifdef CONFIG_DEBUG_FS
+		if (phb->has_dbgfs || !phb->dbgfs)
+			continue;
+
+		phb->has_dbgfs = 1;
+		debugfs_create_file("err_injct", 0200,
+				    phb->dbgfs, hose,
+				    &pnv_eeh_ei_fops);
+
+		debugfs_create_file("err_injct_outbound", 0600,
+				    phb->dbgfs, hose,
+				    &pnv_eeh_outb_dbgfs_ops);
+		debugfs_create_file("err_injct_inboundA", 0600,
+				    phb->dbgfs, hose,
+				    &pnv_eeh_inbA_dbgfs_ops);
+		debugfs_create_file("err_injct_inboundB", 0600,
+				    phb->dbgfs, hose,
+				    &pnv_eeh_inbB_dbgfs_ops);
+#endif /* CONFIG_DEBUG_FS */
 	}
 
+
 	return ret;
 }
 
+static int pnv_eeh_cap_start(struct pci_dn *pdn)
+{
+	u32 status;
+
+	if (!pdn)
+		return 0;
+
+	pnv_pci_cfg_read(pdn, PCI_STATUS, 2, &status);
+	if (!(status & PCI_STATUS_CAP_LIST))
+		return 0;
+
+	return PCI_CAPABILITY_LIST;
+}
+
+static int pnv_eeh_find_cap(struct pci_dn *pdn, int cap)
+{
+	int pos = pnv_eeh_cap_start(pdn);
+	int cnt = 48;   /* Maximal number of capabilities */
+	u32 id;
+
+	if (!pos)
+		return 0;
+
+	while (cnt--) {
+		pnv_pci_cfg_read(pdn, pos, 1, &pos);
+		if (pos < 0x40)
+			break;
+
+		pos &= ~3;
+		pnv_pci_cfg_read(pdn, pos + PCI_CAP_LIST_ID, 1, &id);
+		if (id == 0xff)
+			break;
+
+		/* Found */
+		if (id == cap)
+			return pos;
+
+		/* Next one */
+		pos += PCI_CAP_LIST_NEXT;
+	}
+
+	return 0;
+}
+
+static int pnv_eeh_find_ecap(struct pci_dn *pdn, int cap)
+{
+	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
+	u32 header;
+	int pos = 256, ttl = (4096 - 256) / 8;
+
+	if (!edev || !edev->pcie_cap)
+		return 0;
+	if (pnv_pci_cfg_read(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
+		return 0;
+	else if (!header)
+		return 0;
+
+	while (ttl-- > 0) {
+		if (PCI_EXT_CAP_ID(header) == cap && pos)
+			return pos;
+
+		pos = PCI_EXT_CAP_NEXT(header);
+		if (pos < 256)
+			break;
+
+		if (pnv_pci_cfg_read(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
+			break;
+	}
+
+	return 0;
+}
+
 /**
- * powernv_eeh_dev_probe - Do probe on PCI device
- * @dev: PCI device
- * @flag: unused
+ * pnv_eeh_probe - Do probe on PCI device
+ * @pdn: PCI device node
+ * @data: unused
  *
  * When EEH module is installed during system boot, all PCI devices
  * are checked one by one to see if it supports EEH. The function
@@ -129,12 +375,12 @@ static int powernv_eeh_post_init(void)
  * was possiblly triggered by EEH core, the binding between EEH device
  * and the PCI device isn't built yet.
  */
-static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
+static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
 {
-	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	struct pci_controller *hose = pdn->phb;
 	struct pnv_phb *phb = hose->private_data;
-	struct device_node *dn = pci_device_to_OF_node(dev);
-	struct eeh_dev *edev = of_node_to_eeh_dev(dn);
+	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
+	uint32_t pcie_flags;
 	int ret;
 
 	/*
@@ -143,40 +389,42 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
 	 * the root bridge. So it's not reasonable to continue
 	 * the probing.
 	 */
-	if (!dn || !edev || edev->pe)
-		return 0;
+	if (!edev || edev->pe)
+		return NULL;
 
 	/* Skip for PCI-ISA bridge */
-	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_ISA)
-		return 0;
+	if ((pdn->class_code >> 8) == PCI_CLASS_BRIDGE_ISA)
+		return NULL;
 
 	/* Initialize eeh device */
-	edev->class_code = dev->class;
+	edev->class_code = pdn->class_code;
 	edev->mode	&= 0xFFFFFF00;
-	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+	edev->pcix_cap = pnv_eeh_find_cap(pdn, PCI_CAP_ID_PCIX);
+	edev->pcie_cap = pnv_eeh_find_cap(pdn, PCI_CAP_ID_EXP);
+	edev->aer_cap  = pnv_eeh_find_ecap(pdn, PCI_EXT_CAP_ID_ERR);
+	if ((edev->class_code >> 8) == PCI_CLASS_BRIDGE_PCI) {
 		edev->mode |= EEH_DEV_BRIDGE;
-	edev->pcix_cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
-	if (pci_is_pcie(dev)) {
-		edev->pcie_cap = pci_pcie_cap(dev);
-
-		if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT)
-			edev->mode |= EEH_DEV_ROOT_PORT;
-		else if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM)
-			edev->mode |= EEH_DEV_DS_PORT;
-
-		edev->aer_cap = pci_find_ext_capability(dev,
-							PCI_EXT_CAP_ID_ERR);
+		if (edev->pcie_cap) {
+			pnv_pci_cfg_read(pdn, edev->pcie_cap + PCI_EXP_FLAGS,
+					 2, &pcie_flags);
+			pcie_flags = (pcie_flags & PCI_EXP_FLAGS_TYPE) >> 4;
+			if (pcie_flags == PCI_EXP_TYPE_ROOT_PORT)
+				edev->mode |= EEH_DEV_ROOT_PORT;
+			else if (pcie_flags == PCI_EXP_TYPE_DOWNSTREAM)
+				edev->mode |= EEH_DEV_DS_PORT;
+		}
 	}
 
-	edev->config_addr	= ((dev->bus->number << 8) | dev->devfn);
-	edev->pe_config_addr	= phb->bdfn_to_pe(phb, dev->bus, dev->devfn & 0xff);
+	edev->config_addr    = (pdn->busno << 8) | (pdn->devfn);
+	edev->pe_config_addr = phb->ioda.pe_rmap[edev->config_addr];
 
 	/* Create PE */
 	ret = eeh_add_to_parent_pe(edev);
 	if (ret) {
-		pr_warn("%s: Can't add PCI dev %s to parent PE (%d)\n",
-			__func__, pci_name(dev), ret);
-		return ret;
+		pr_warn("%s: Can't add PCI dev %04x:%02x:%02x.%01x to parent PE (%d)\n",
+			__func__, hose->global_number, pdn->busno,
+			PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn), ret);
+		return NULL;
 	}
 
 	/*
@@ -195,8 +443,10 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
 	 * Broadcom Austin 4-ports NICs (14e4:1657)
 	 * Broadcom Shiner 2-ports 10G NICs (14e4:168e)
 	 */
-	if ((dev->vendor == PCI_VENDOR_ID_BROADCOM && dev->device == 0x1657) ||
-	    (dev->vendor == PCI_VENDOR_ID_BROADCOM && dev->device == 0x168e))
+	if ((pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
+	     pdn->device_id == 0x1657) ||
+	    (pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
+	     pdn->device_id == 0x168e))
 		edev->pe->state |= EEH_PE_CFG_RESTRICTED;
 
 	/*
@@ -206,7 +456,8 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
 	 * to PE reset.
 	 */
 	if (!edev->pe->bus)
-		edev->pe->bus = dev->bus;
+		edev->pe->bus = pci_find_bus(hose->global_number,
+					     pdn->busno);
 
 	/*
 	 * Enable EEH explicitly so that we will do EEH check
@@ -217,11 +468,11 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
 	/* Save memory bars */
 	eeh_save_bars(edev);
 
-	return 0;
+	return NULL;
 }
 
 /**
- * powernv_eeh_set_option - Initialize EEH or MMIO/DMA reenable
+ * pnv_eeh_set_option - Initialize EEH or MMIO/DMA reenable
  * @pe: EEH PE
  * @option: operation to be issued
  *
@@ -229,36 +480,236 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
  * Currently, following options are support according to PAPR:
  * Enable EEH, Disable EEH, Enable MMIO and Enable DMA
  */
-static int powernv_eeh_set_option(struct eeh_pe *pe, int option)
+static int pnv_eeh_set_option(struct eeh_pe *pe, int option)
 {
 	struct pci_controller *hose = pe->phb;
 	struct pnv_phb *phb = hose->private_data;
-	int ret = -EEXIST;
+	bool freeze_pe = false;
+	int opt, ret = 0;
+	s64 rc;
+
+	/* Sanity check on option */
+	switch (option) {
+	case EEH_OPT_DISABLE:
+		return -EPERM;
+	case EEH_OPT_ENABLE:
+		return 0;
+	case EEH_OPT_THAW_MMIO:
+		opt = OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO;
+		break;
+	case EEH_OPT_THAW_DMA:
+		opt = OPAL_EEH_ACTION_CLEAR_FREEZE_DMA;
+		break;
+	case EEH_OPT_FREEZE_PE:
+		freeze_pe = true;
+		opt = OPAL_EEH_ACTION_SET_FREEZE_ALL;
+		break;
+	default:
+		pr_warn("%s: Invalid option %d\n", __func__, option);
+		return -EINVAL;
+	}
 
-	/*
-	 * What we need do is pass it down for hardware
-	 * implementation to handle it.
-	 */
-	if (phb->eeh_ops && phb->eeh_ops->set_option)
-		ret = phb->eeh_ops->set_option(pe, option);
+	/* If PHB supports compound PE, to handle it */
+	if (freeze_pe) {
+		if (phb->freeze_pe) {
+			phb->freeze_pe(phb, pe->addr);
+		} else {
+			rc = opal_pci_eeh_freeze_set(phb->opal_id,
+						     pe->addr, opt);
+			if (rc != OPAL_SUCCESS) {
+				pr_warn("%s: Failure %lld freezing "
+					"PHB#%x-PE#%x\n",
+					__func__, rc,
+					phb->hose->global_number, pe->addr);
+				ret = -EIO;
+			}
+		}
+	} else {
+		if (phb->unfreeze_pe) {
+			ret = phb->unfreeze_pe(phb, pe->addr, opt);
+		} else {
+			rc = opal_pci_eeh_freeze_clear(phb->opal_id,
+						       pe->addr, opt);
+			if (rc != OPAL_SUCCESS) {
+				pr_warn("%s: Failure %lld enable %d "
+					"for PHB#%x-PE#%x\n",
+					__func__, rc, option,
+					phb->hose->global_number, pe->addr);
+				ret = -EIO;
+			}
+		}
+	}
 
 	return ret;
 }
 
 /**
- * powernv_eeh_get_pe_addr - Retrieve PE address
+ * pnv_eeh_get_pe_addr - Retrieve PE address
  * @pe: EEH PE
  *
  * Retrieve the PE address according to the given tranditional
  * PCI BDF (Bus/Device/Function) address.
  */
-static int powernv_eeh_get_pe_addr(struct eeh_pe *pe)
+static int pnv_eeh_get_pe_addr(struct eeh_pe *pe)
 {
 	return pe->addr;
 }
 
+static void pnv_eeh_get_phb_diag(struct eeh_pe *pe)
+{
+	struct pnv_phb *phb = pe->phb->private_data;
+	s64 rc;
+
+	rc = opal_pci_get_phb_diag_data2(phb->opal_id, pe->data,
+					 PNV_PCI_DIAG_BUF_SIZE);
+	if (rc != OPAL_SUCCESS)
+		pr_warn("%s: Failure %lld getting PHB#%x diag-data\n",
+			__func__, rc, pe->phb->global_number);
+}
+
+static int pnv_eeh_get_phb_state(struct eeh_pe *pe)
+{
+	struct pnv_phb *phb = pe->phb->private_data;
+	u8 fstate;
+	__be16 pcierr;
+	s64 rc;
+	int result = 0;
+
+	rc = opal_pci_eeh_freeze_status(phb->opal_id,
+					pe->addr,
+					&fstate,
+					&pcierr,
+					NULL);
+	if (rc != OPAL_SUCCESS) {
+		pr_warn("%s: Failure %lld getting PHB#%x state\n",
+			__func__, rc, phb->hose->global_number);
+		return EEH_STATE_NOT_SUPPORT;
+	}
+
+	/*
+	 * Check PHB state. If the PHB is frozen for the
+	 * first time, to dump the PHB diag-data.
+	 */
+	if (be16_to_cpu(pcierr) != OPAL_EEH_PHB_ERROR) {
+		result = (EEH_STATE_MMIO_ACTIVE  |
+			  EEH_STATE_DMA_ACTIVE   |
+			  EEH_STATE_MMIO_ENABLED |
+			  EEH_STATE_DMA_ENABLED);
+	} else if (!(pe->state & EEH_PE_ISOLATED)) {
+		eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
+		pnv_eeh_get_phb_diag(pe);
+
+		if (eeh_has_flag(EEH_EARLY_DUMP_LOG))
+			pnv_pci_dump_phb_diag_data(pe->phb, pe->data);
+	}
+
+	return result;
+}
+
+static int pnv_eeh_get_pe_state(struct eeh_pe *pe)
+{
+	struct pnv_phb *phb = pe->phb->private_data;
+	u8 fstate;
+	__be16 pcierr;
+	s64 rc;
+	int result;
+
+	/*
+	 * We don't clobber hardware frozen state until PE
+	 * reset is completed. In order to keep EEH core
+	 * moving forward, we have to return operational
+	 * state during PE reset.
+	 */
+	if (pe->state & EEH_PE_RESET) {
+		result = (EEH_STATE_MMIO_ACTIVE  |
+			  EEH_STATE_DMA_ACTIVE   |
+			  EEH_STATE_MMIO_ENABLED |
+			  EEH_STATE_DMA_ENABLED);
+		return result;
+	}
+
+	/*
+	 * Fetch PE state from hardware. If the PHB
+	 * supports compound PE, let it handle that.
+	 */
+	if (phb->get_pe_state) {
+		fstate = phb->get_pe_state(phb, pe->addr);
+	} else {
+		rc = opal_pci_eeh_freeze_status(phb->opal_id,
+						pe->addr,
+						&fstate,
+						&pcierr,
+						NULL);
+		if (rc != OPAL_SUCCESS) {
+			pr_warn("%s: Failure %lld getting PHB#%x-PE%x state\n",
+				__func__, rc, phb->hose->global_number,
+				pe->addr);
+			return EEH_STATE_NOT_SUPPORT;
+		}
+	}
+
+	/* Figure out state */
+	switch (fstate) {
+	case OPAL_EEH_STOPPED_NOT_FROZEN:
+		result = (EEH_STATE_MMIO_ACTIVE  |
+			  EEH_STATE_DMA_ACTIVE   |
+			  EEH_STATE_MMIO_ENABLED |
+			  EEH_STATE_DMA_ENABLED);
+		break;
+	case OPAL_EEH_STOPPED_MMIO_FREEZE:
+		result = (EEH_STATE_DMA_ACTIVE |
+			  EEH_STATE_DMA_ENABLED);
+		break;
+	case OPAL_EEH_STOPPED_DMA_FREEZE:
+		result = (EEH_STATE_MMIO_ACTIVE |
+			  EEH_STATE_MMIO_ENABLED);
+		break;
+	case OPAL_EEH_STOPPED_MMIO_DMA_FREEZE:
+		result = 0;
+		break;
+	case OPAL_EEH_STOPPED_RESET:
+		result = EEH_STATE_RESET_ACTIVE;
+		break;
+	case OPAL_EEH_STOPPED_TEMP_UNAVAIL:
+		result = EEH_STATE_UNAVAILABLE;
+		break;
+	case OPAL_EEH_STOPPED_PERM_UNAVAIL:
+		result = EEH_STATE_NOT_SUPPORT;
+		break;
+	default:
+		result = EEH_STATE_NOT_SUPPORT;
+		pr_warn("%s: Invalid PHB#%x-PE#%x state %x\n",
+			__func__, phb->hose->global_number,
+			pe->addr, fstate);
+	}
+
+	/*
+	 * If PHB supports compound PE, to freeze all
+	 * slave PEs for consistency.
+	 *
+	 * If the PE is switching to frozen state for the
+	 * first time, to dump the PHB diag-data.
+	 */
+	if (!(result & EEH_STATE_NOT_SUPPORT) &&
+	    !(result & EEH_STATE_UNAVAILABLE) &&
+	    !(result & EEH_STATE_MMIO_ACTIVE) &&
+	    !(result & EEH_STATE_DMA_ACTIVE)  &&
+	    !(pe->state & EEH_PE_ISOLATED)) {
+		if (phb->freeze_pe)
+			phb->freeze_pe(phb, pe->addr);
+
+		eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
+		pnv_eeh_get_phb_diag(pe);
+
+		if (eeh_has_flag(EEH_EARLY_DUMP_LOG))
+			pnv_pci_dump_phb_diag_data(pe->phb, pe->data);
+	}
+
+	return result;
+}
+
 /**
- * powernv_eeh_get_state - Retrieve PE state
+ * pnv_eeh_get_state - Retrieve PE state
  * @pe: EEH PE
  * @delay: delay while PE state is temporarily unavailable
  *
@@ -267,64 +718,279 @@ static int powernv_eeh_get_pe_addr(struct eeh_pe *pe)
  * we prefer passing down to hardware implementation to handle
  * it.
  */
-static int powernv_eeh_get_state(struct eeh_pe *pe, int *delay)
+static int pnv_eeh_get_state(struct eeh_pe *pe, int *delay)
+{
+	int ret;
+
+	if (pe->type & EEH_PE_PHB)
+		ret = pnv_eeh_get_phb_state(pe);
+	else
+		ret = pnv_eeh_get_pe_state(pe);
+
+	if (!delay)
+		return ret;
+
+	/*
+	 * If the PE state is temporarily unavailable,
+	 * to inform the EEH core delay for default
+	 * period (1 second)
+	 */
+	*delay = 0;
+	if (ret & EEH_STATE_UNAVAILABLE)
+		*delay = 1000;
+
+	return ret;
+}
+
+static s64 pnv_eeh_phb_poll(struct pnv_phb *phb)
+{
+	s64 rc = OPAL_HARDWARE;
+
+	while (1) {
+		rc = opal_pci_poll(phb->opal_id);
+		if (rc <= 0)
+			break;
+
+		if (system_state < SYSTEM_RUNNING)
+			udelay(1000 * rc);
+		else
+			msleep(rc);
+	}
+
+	return rc;
+}
+
+int pnv_eeh_phb_reset(struct pci_controller *hose, int option)
 {
-	struct pci_controller *hose = pe->phb;
 	struct pnv_phb *phb = hose->private_data;
-	int ret = EEH_STATE_NOT_SUPPORT;
+	s64 rc = OPAL_HARDWARE;
+
+	pr_debug("%s: Reset PHB#%x, option=%d\n",
+		 __func__, hose->global_number, option);
+
+	/* Issue PHB complete reset request */
+	if (option == EEH_RESET_FUNDAMENTAL ||
+	    option == EEH_RESET_HOT)
+		rc = opal_pci_reset(phb->opal_id,
+				    OPAL_RESET_PHB_COMPLETE,
+				    OPAL_ASSERT_RESET);
+	else if (option == EEH_RESET_DEACTIVATE)
+		rc = opal_pci_reset(phb->opal_id,
+				    OPAL_RESET_PHB_COMPLETE,
+				    OPAL_DEASSERT_RESET);
+	if (rc < 0)
+		goto out;
 
-	if (phb->eeh_ops && phb->eeh_ops->get_state) {
-		ret = phb->eeh_ops->get_state(pe);
+	/*
+	 * Poll state of the PHB until the request is done
+	 * successfully. The PHB reset is usually PHB complete
+	 * reset followed by hot reset on root bus. So we also
+	 * need the PCI bus settlement delay.
+	 */
+	rc = pnv_eeh_phb_poll(phb);
+	if (option == EEH_RESET_DEACTIVATE) {
+		if (system_state < SYSTEM_RUNNING)
+			udelay(1000 * EEH_PE_RST_SETTLE_TIME);
+		else
+			msleep(EEH_PE_RST_SETTLE_TIME);
+	}
+out:
+	if (rc != OPAL_SUCCESS)
+		return -EIO;
 
-		/*
-		 * If the PE state is temporarily unavailable,
-		 * to inform the EEH core delay for default
-		 * period (1 second)
-		 */
-		if (delay) {
-			*delay = 0;
-			if (ret & EEH_STATE_UNAVAILABLE)
-				*delay = 1000;
+	return 0;
+}
+
+static int pnv_eeh_root_reset(struct pci_controller *hose, int option)
+{
+	struct pnv_phb *phb = hose->private_data;
+	s64 rc = OPAL_HARDWARE;
+
+	pr_debug("%s: Reset PHB#%x, option=%d\n",
+		 __func__, hose->global_number, option);
+
+	/*
+	 * During the reset deassert time, we needn't care
+	 * the reset scope because the firmware does nothing
+	 * for fundamental or hot reset during deassert phase.
+	 */
+	if (option == EEH_RESET_FUNDAMENTAL)
+		rc = opal_pci_reset(phb->opal_id,
+				    OPAL_RESET_PCI_FUNDAMENTAL,
+				    OPAL_ASSERT_RESET);
+	else if (option == EEH_RESET_HOT)
+		rc = opal_pci_reset(phb->opal_id,
+				    OPAL_RESET_PCI_HOT,
+				    OPAL_ASSERT_RESET);
+	else if (option == EEH_RESET_DEACTIVATE)
+		rc = opal_pci_reset(phb->opal_id,
+				    OPAL_RESET_PCI_HOT,
+				    OPAL_DEASSERT_RESET);
+	if (rc < 0)
+		goto out;
+
+	/* Poll state of the PHB until the request is done */
+	rc = pnv_eeh_phb_poll(phb);
+	if (option == EEH_RESET_DEACTIVATE)
+		msleep(EEH_PE_RST_SETTLE_TIME);
+out:
+	if (rc != OPAL_SUCCESS)
+		return -EIO;
+
+	return 0;
+}
+
+static int pnv_eeh_bridge_reset(struct pci_dev *dev, int option)
+{
+	struct pci_dn *pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn);
+	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
+	int aer = edev ? edev->aer_cap : 0;
+	u32 ctrl;
+
+	pr_debug("%s: Reset PCI bus %04x:%02x with option %d\n",
+		 __func__, pci_domain_nr(dev->bus),
+		 dev->bus->number, option);
+
+	switch (option) {
+	case EEH_RESET_FUNDAMENTAL:
+	case EEH_RESET_HOT:
+		/* Don't report linkDown event */
+		if (aer) {
+			eeh_ops->read_config(pdn, aer + PCI_ERR_UNCOR_MASK,
+					     4, &ctrl);
+			ctrl |= PCI_ERR_UNC_SURPDN;
+			eeh_ops->write_config(pdn, aer + PCI_ERR_UNCOR_MASK,
+					      4, ctrl);
 		}
+
+		eeh_ops->read_config(pdn, PCI_BRIDGE_CONTROL, 2, &ctrl);
+		ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
+		eeh_ops->write_config(pdn, PCI_BRIDGE_CONTROL, 2, ctrl);
+
+		msleep(EEH_PE_RST_HOLD_TIME);
+		break;
+	case EEH_RESET_DEACTIVATE:
+		eeh_ops->read_config(pdn, PCI_BRIDGE_CONTROL, 2, &ctrl);
+		ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
+		eeh_ops->write_config(pdn, PCI_BRIDGE_CONTROL, 2, ctrl);
+
+		msleep(EEH_PE_RST_SETTLE_TIME);
+
+		/* Continue reporting linkDown event */
+		if (aer) {
+			eeh_ops->read_config(pdn, aer + PCI_ERR_UNCOR_MASK,
+					     4, &ctrl);
+			ctrl &= ~PCI_ERR_UNC_SURPDN;
+			eeh_ops->write_config(pdn, aer + PCI_ERR_UNCOR_MASK,
+					      4, ctrl);
+		}
+
+		break;
 	}
 
-	return ret;
+	return 0;
+}
+
+void pnv_pci_reset_secondary_bus(struct pci_dev *dev)
+{
+	struct pci_controller *hose;
+
+	if (pci_is_root_bus(dev->bus)) {
+		hose = pci_bus_to_host(dev->bus);
+		pnv_eeh_root_reset(hose, EEH_RESET_HOT);
+		pnv_eeh_root_reset(hose, EEH_RESET_DEACTIVATE);
+	} else {
+		pnv_eeh_bridge_reset(dev, EEH_RESET_HOT);
+		pnv_eeh_bridge_reset(dev, EEH_RESET_DEACTIVATE);
+	}
 }
 
 /**
- * powernv_eeh_reset - Reset the specified PE
+ * pnv_eeh_reset - Reset the specified PE
  * @pe: EEH PE
  * @option: reset option
  *
- * Reset the specified PE
+ * Do reset on the indicated PE. For PCI bus sensitive PE,
+ * we need to reset the parent p2p bridge. The PHB has to
+ * be reinitialized if the p2p bridge is root bridge. For
+ * PCI device sensitive PE, we will try to reset the device
+ * through FLR. For now, we don't have OPAL APIs to do HARD
+ * reset yet, so all reset would be SOFT (HOT) reset.
  */
-static int powernv_eeh_reset(struct eeh_pe *pe, int option)
+static int pnv_eeh_reset(struct eeh_pe *pe, int option)
 {
 	struct pci_controller *hose = pe->phb;
-	struct pnv_phb *phb = hose->private_data;
-	int ret = -EEXIST;
+	struct pci_bus *bus;
+	int ret;
+
+	/*
+	 * For PHB reset, we always have complete reset. For those PEs whose
+	 * primary bus derived from root complex (root bus) or root port
+	 * (usually bus#1), we apply hot or fundamental reset on the root port.
+	 * For other PEs, we always have hot reset on the PE primary bus.
+	 *
+	 * Here, we have different design to pHyp, which always clear the
+	 * frozen state during PE reset. However, the good idea here from
+	 * benh is to keep frozen state before we get PE reset done completely
+	 * (until BAR restore). With the frozen state, HW drops illegal IO
+	 * or MMIO access, which can incur recrusive frozen PE during PE
+	 * reset. The side effect is that EEH core has to clear the frozen
+	 * state explicitly after BAR restore.
+	 */
+	if (pe->type & EEH_PE_PHB) {
+		ret = pnv_eeh_phb_reset(hose, option);
+	} else {
+		struct pnv_phb *phb;
+		s64 rc;
 
-	if (phb->eeh_ops && phb->eeh_ops->reset)
-		ret = phb->eeh_ops->reset(pe, option);
+		/*
+		 * The frozen PE might be caused by PAPR error injection
+		 * registers, which are expected to be cleared after hitting
+		 * frozen PE as stated in the hardware spec. Unfortunately,
+		 * that's not true on P7IOC. So we have to clear it manually
+		 * to avoid recursive EEH errors during recovery.
+		 */
+		phb = hose->private_data;
+		if (phb->model == PNV_PHB_MODEL_P7IOC &&
+		    (option == EEH_RESET_HOT ||
+		    option == EEH_RESET_FUNDAMENTAL)) {
+			rc = opal_pci_reset(phb->opal_id,
+					    OPAL_RESET_PHB_ERROR,
+					    OPAL_ASSERT_RESET);
+			if (rc != OPAL_SUCCESS) {
+				pr_warn("%s: Failure %lld clearing "
+					"error injection registers\n",
+					__func__, rc);
+				return -EIO;
+			}
+		}
+
+		bus = eeh_pe_bus_get(pe);
+		if (pci_is_root_bus(bus) ||
+			pci_is_root_bus(bus->parent))
+			ret = pnv_eeh_root_reset(hose, option);
+		else
+			ret = pnv_eeh_bridge_reset(bus->self, option);
+	}
 
 	return ret;
 }
 
 /**
- * powernv_eeh_wait_state - Wait for PE state
+ * pnv_eeh_wait_state - Wait for PE state
  * @pe: EEH PE
  * @max_wait: maximal period in microsecond
  *
  * Wait for the state of associated PE. It might take some time
  * to retrieve the PE's state.
  */
-static int powernv_eeh_wait_state(struct eeh_pe *pe, int max_wait)
+static int pnv_eeh_wait_state(struct eeh_pe *pe, int max_wait)
 {
 	int ret;
 	int mwait;
 
 	while (1) {
-		ret = powernv_eeh_get_state(pe, &mwait);
+		ret = pnv_eeh_get_state(pe, &mwait);
 
 		/*
 		 * If the PE's state is temporarily unavailable,
@@ -348,7 +1014,7 @@ static int powernv_eeh_wait_state(struct eeh_pe *pe, int max_wait)
 }
 
 /**
- * powernv_eeh_get_log - Retrieve error log
+ * pnv_eeh_get_log - Retrieve error log
  * @pe: EEH PE
  * @severity: temporary or permanent error log
  * @drv_log: driver log to be combined with retrieved error log
@@ -356,41 +1022,30 @@ static int powernv_eeh_wait_state(struct eeh_pe *pe, int max_wait)
  *
  * Retrieve the temporary or permanent error from the PE.
  */
-static int powernv_eeh_get_log(struct eeh_pe *pe, int severity,
-			       char *drv_log, unsigned long len)
+static int pnv_eeh_get_log(struct eeh_pe *pe, int severity,
+			   char *drv_log, unsigned long len)
 {
-	struct pci_controller *hose = pe->phb;
-	struct pnv_phb *phb = hose->private_data;
-	int ret = -EEXIST;
+	if (!eeh_has_flag(EEH_EARLY_DUMP_LOG))
+		pnv_pci_dump_phb_diag_data(pe->phb, pe->data);
 
-	if (phb->eeh_ops && phb->eeh_ops->get_log)
-		ret = phb->eeh_ops->get_log(pe, severity, drv_log, len);
-
-	return ret;
+	return 0;
 }
 
 /**
- * powernv_eeh_configure_bridge - Configure PCI bridges in the indicated PE
+ * pnv_eeh_configure_bridge - Configure PCI bridges in the indicated PE
  * @pe: EEH PE
  *
  * The function will be called to reconfigure the bridges included
  * in the specified PE so that the mulfunctional PE would be recovered
  * again.
  */
-static int powernv_eeh_configure_bridge(struct eeh_pe *pe)
+static int pnv_eeh_configure_bridge(struct eeh_pe *pe)
 {
-	struct pci_controller *hose = pe->phb;
-	struct pnv_phb *phb = hose->private_data;
-	int ret = 0;
-
-	if (phb->eeh_ops && phb->eeh_ops->configure_bridge)
-		ret = phb->eeh_ops->configure_bridge(pe);
-
-	return ret;
+	return 0;
 }
 
 /**
- * powernv_pe_err_inject - Inject specified error to the indicated PE
+ * pnv_pe_err_inject - Inject specified error to the indicated PE
  * @pe: the indicated PE
  * @type: error type
  * @func: specific error type
@@ -401,22 +1056,52 @@ static int powernv_eeh_configure_bridge(struct eeh_pe *pe)
  * determined by @type and @func, to the indicated PE for
  * testing purpose.
  */
-static int powernv_eeh_err_inject(struct eeh_pe *pe, int type, int func,
-				  unsigned long addr, unsigned long mask)
+static int pnv_eeh_err_inject(struct eeh_pe *pe, int type, int func,
+			      unsigned long addr, unsigned long mask)
 {
 	struct pci_controller *hose = pe->phb;
 	struct pnv_phb *phb = hose->private_data;
-	int ret = -EEXIST;
+	s64 rc;
+
+	/* Sanity check on error type */
+	if (type != OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR &&
+	    type != OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR64) {
+		pr_warn("%s: Invalid error type %d\n",
+			__func__, type);
+		return -ERANGE;
+	}
 
-	if (phb->eeh_ops && phb->eeh_ops->err_inject)
-		ret = phb->eeh_ops->err_inject(pe, type, func, addr, mask);
+	if (func < OPAL_ERR_INJECT_FUNC_IOA_LD_MEM_ADDR ||
+	    func > OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_TARGET) {
+		pr_warn("%s: Invalid error function %d\n",
+			__func__, func);
+		return -ERANGE;
+	}
 
-	return ret;
+	/* Firmware supports error injection ? */
+	if (!opal_check_token(OPAL_PCI_ERR_INJECT)) {
+		pr_warn("%s: Firmware doesn't support error injection\n",
+			__func__);
+		return -ENXIO;
+	}
+
+	/* Do error injection */
+	rc = opal_pci_err_inject(phb->opal_id, pe->addr,
+				 type, func, addr, mask);
+	if (rc != OPAL_SUCCESS) {
+		pr_warn("%s: Failure %lld injecting error "
+			"%d-%d to PHB#%x-PE#%x\n",
+			__func__, rc, type, func,
+			hose->global_number, pe->addr);
+		return -EIO;
+	}
+
+	return 0;
 }
 
-static inline bool powernv_eeh_cfg_blocked(struct device_node *dn)
+static inline bool pnv_eeh_cfg_blocked(struct pci_dn *pdn)
 {
-	struct eeh_dev *edev = of_node_to_eeh_dev(dn);
+	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
 
 	if (!edev || !edev->pe)
 		return false;
@@ -427,51 +1112,377 @@ static inline bool powernv_eeh_cfg_blocked(struct device_node *dn)
 	return false;
 }
 
-static int powernv_eeh_read_config(struct device_node *dn,
-				   int where, int size, u32 *val)
+static int pnv_eeh_read_config(struct pci_dn *pdn,
+			       int where, int size, u32 *val)
 {
-	if (powernv_eeh_cfg_blocked(dn)) {
+	if (!pdn)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	if (pnv_eeh_cfg_blocked(pdn)) {
 		*val = 0xFFFFFFFF;
 		return PCIBIOS_SET_FAILED;
 	}
 
-	return pnv_pci_cfg_read(dn, where, size, val);
+	return pnv_pci_cfg_read(pdn, where, size, val);
 }
 
-static int powernv_eeh_write_config(struct device_node *dn,
-				    int where, int size, u32 val)
+static int pnv_eeh_write_config(struct pci_dn *pdn,
+				int where, int size, u32 val)
 {
-	if (powernv_eeh_cfg_blocked(dn))
+	if (!pdn)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	if (pnv_eeh_cfg_blocked(pdn))
 		return PCIBIOS_SET_FAILED;
 
-	return pnv_pci_cfg_write(dn, where, size, val);
+	return pnv_pci_cfg_write(pdn, where, size, val);
+}
+
+static void pnv_eeh_dump_hub_diag_common(struct OpalIoP7IOCErrorData *data)
+{
+	/* GEM */
+	if (data->gemXfir || data->gemRfir ||
+	    data->gemRirqfir || data->gemMask || data->gemRwof)
+		pr_info("  GEM: %016llx %016llx %016llx %016llx %016llx\n",
+			be64_to_cpu(data->gemXfir),
+			be64_to_cpu(data->gemRfir),
+			be64_to_cpu(data->gemRirqfir),
+			be64_to_cpu(data->gemMask),
+			be64_to_cpu(data->gemRwof));
+
+	/* LEM */
+	if (data->lemFir || data->lemErrMask ||
+	    data->lemAction0 || data->lemAction1 || data->lemWof)
+		pr_info("  LEM: %016llx %016llx %016llx %016llx %016llx\n",
+			be64_to_cpu(data->lemFir),
+			be64_to_cpu(data->lemErrMask),
+			be64_to_cpu(data->lemAction0),
+			be64_to_cpu(data->lemAction1),
+			be64_to_cpu(data->lemWof));
+}
+
+static void pnv_eeh_get_and_dump_hub_diag(struct pci_controller *hose)
+{
+	struct pnv_phb *phb = hose->private_data;
+	struct OpalIoP7IOCErrorData *data = &phb->diag.hub_diag;
+	long rc;
+
+	rc = opal_pci_get_hub_diag_data(phb->hub_id, data, sizeof(*data));
+	if (rc != OPAL_SUCCESS) {
+		pr_warn("%s: Failed to get HUB#%llx diag-data (%ld)\n",
+			__func__, phb->hub_id, rc);
+		return;
+	}
+
+	switch (data->type) {
+	case OPAL_P7IOC_DIAG_TYPE_RGC:
+		pr_info("P7IOC diag-data for RGC\n\n");
+		pnv_eeh_dump_hub_diag_common(data);
+		if (data->rgc.rgcStatus || data->rgc.rgcLdcp)
+			pr_info("  RGC: %016llx %016llx\n",
+				be64_to_cpu(data->rgc.rgcStatus),
+				be64_to_cpu(data->rgc.rgcLdcp));
+		break;
+	case OPAL_P7IOC_DIAG_TYPE_BI:
+		pr_info("P7IOC diag-data for BI %s\n\n",
+			data->bi.biDownbound ? "Downbound" : "Upbound");
+		pnv_eeh_dump_hub_diag_common(data);
+		if (data->bi.biLdcp0 || data->bi.biLdcp1 ||
+		    data->bi.biLdcp2 || data->bi.biFenceStatus)
+			pr_info("  BI:  %016llx %016llx %016llx %016llx\n",
+				be64_to_cpu(data->bi.biLdcp0),
+				be64_to_cpu(data->bi.biLdcp1),
+				be64_to_cpu(data->bi.biLdcp2),
+				be64_to_cpu(data->bi.biFenceStatus));
+		break;
+	case OPAL_P7IOC_DIAG_TYPE_CI:
+		pr_info("P7IOC diag-data for CI Port %d\n\n",
+			data->ci.ciPort);
+		pnv_eeh_dump_hub_diag_common(data);
+		if (data->ci.ciPortStatus || data->ci.ciPortLdcp)
+			pr_info("  CI:  %016llx %016llx\n",
+				be64_to_cpu(data->ci.ciPortStatus),
+				be64_to_cpu(data->ci.ciPortLdcp));
+		break;
+	case OPAL_P7IOC_DIAG_TYPE_MISC:
+		pr_info("P7IOC diag-data for MISC\n\n");
+		pnv_eeh_dump_hub_diag_common(data);
+		break;
+	case OPAL_P7IOC_DIAG_TYPE_I2C:
+		pr_info("P7IOC diag-data for I2C\n\n");
+		pnv_eeh_dump_hub_diag_common(data);
+		break;
+	default:
+		pr_warn("%s: Invalid type of HUB#%llx diag-data (%d)\n",
+			__func__, phb->hub_id, data->type);
+	}
+}
+
+static int pnv_eeh_get_pe(struct pci_controller *hose,
+			  u16 pe_no, struct eeh_pe **pe)
+{
+	struct pnv_phb *phb = hose->private_data;
+	struct pnv_ioda_pe *pnv_pe;
+	struct eeh_pe *dev_pe;
+	struct eeh_dev edev;
+
+	/*
+	 * If PHB supports compound PE, to fetch
+	 * the master PE because slave PE is invisible
+	 * to EEH core.
+	 */
+	pnv_pe = &phb->ioda.pe_array[pe_no];
+	if (pnv_pe->flags & PNV_IODA_PE_SLAVE) {
+		pnv_pe = pnv_pe->master;
+		WARN_ON(!pnv_pe ||
+			!(pnv_pe->flags & PNV_IODA_PE_MASTER));
+		pe_no = pnv_pe->pe_number;
+	}
+
+	/* Find the PE according to PE# */
+	memset(&edev, 0, sizeof(struct eeh_dev));
+	edev.phb = hose;
+	edev.pe_config_addr = pe_no;
+	dev_pe = eeh_pe_get(&edev);
+	if (!dev_pe)
+		return -EEXIST;
+
+	/* Freeze the (compound) PE */
+	*pe = dev_pe;
+	if (!(dev_pe->state & EEH_PE_ISOLATED))
+		phb->freeze_pe(phb, pe_no);
+
+	/*
+	 * At this point, we're sure the (compound) PE should
+	 * have been frozen. However, we still need poke until
+	 * hitting the frozen PE on top level.
+	 */
+	dev_pe = dev_pe->parent;
+	while (dev_pe && !(dev_pe->type & EEH_PE_PHB)) {
+		int ret;
+		int active_flags = (EEH_STATE_MMIO_ACTIVE |
+				    EEH_STATE_DMA_ACTIVE);
+
+		ret = eeh_ops->get_state(dev_pe, NULL);
+		if (ret <= 0 || (ret & active_flags) == active_flags) {
+			dev_pe = dev_pe->parent;
+			continue;
+		}
+
+		/* Frozen parent PE */
+		*pe = dev_pe;
+		if (!(dev_pe->state & EEH_PE_ISOLATED))
+			phb->freeze_pe(phb, dev_pe->addr);
+
+		/* Next one */
+		dev_pe = dev_pe->parent;
+	}
+
+	return 0;
 }
 
 /**
- * powernv_eeh_next_error - Retrieve next EEH error to handle
+ * pnv_eeh_next_error - Retrieve next EEH error to handle
  * @pe: Affected PE
  *
- * Using OPAL API, to retrieve next EEH error for EEH core to handle
+ * The function is expected to be called by EEH core while it gets
+ * special EEH event (without binding PE). The function calls to
+ * OPAL APIs for next error to handle. The informational error is
+ * handled internally by platform. However, the dead IOC, dead PHB,
+ * fenced PHB and frozen PE should be handled by EEH core eventually.
  */
-static int powernv_eeh_next_error(struct eeh_pe **pe)
+static int pnv_eeh_next_error(struct eeh_pe **pe)
 {
 	struct pci_controller *hose;
-	struct pnv_phb *phb = NULL;
+	struct pnv_phb *phb;
+	struct eeh_pe *phb_pe, *parent_pe;
+	__be64 frozen_pe_no;
+	__be16 err_type, severity;
+	int active_flags = (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE);
+	long rc;
+	int state, ret = EEH_NEXT_ERR_NONE;
+
+	/*
+	 * While running here, it's safe to purge the event queue.
+	 * And we should keep the cached OPAL notifier event sychronized
+	 * between the kernel and firmware.
+	 */
+	eeh_remove_event(NULL, false);
+	opal_notifier_update_evt(OPAL_EVENT_PCI_ERROR, 0x0ul);
 
 	list_for_each_entry(hose, &hose_list, list_node) {
+		/*
+		 * If the subordinate PCI buses of the PHB has been
+		 * removed or is exactly under error recovery, we
+		 * needn't take care of it any more.
+		 */
 		phb = hose->private_data;
-		break;
-	}
+		phb_pe = eeh_phb_pe_get(hose);
+		if (!phb_pe || (phb_pe->state & EEH_PE_ISOLATED))
+			continue;
+
+		rc = opal_pci_next_error(phb->opal_id,
+					 &frozen_pe_no, &err_type, &severity);
+		if (rc != OPAL_SUCCESS) {
+			pr_devel("%s: Invalid return value on "
+				 "PHB#%x (0x%lx) from opal_pci_next_error",
+				 __func__, hose->global_number, rc);
+			continue;
+		}
+
+		/* If the PHB doesn't have error, stop processing */
+		if (be16_to_cpu(err_type) == OPAL_EEH_NO_ERROR ||
+		    be16_to_cpu(severity) == OPAL_EEH_SEV_NO_ERROR) {
+			pr_devel("%s: No error found on PHB#%x\n",
+				 __func__, hose->global_number);
+			continue;
+		}
+
+		/*
+		 * Processing the error. We're expecting the error with
+		 * highest priority reported upon multiple errors on the
+		 * specific PHB.
+		 */
+		pr_devel("%s: Error (%d, %d, %llu) on PHB#%x\n",
+			__func__, be16_to_cpu(err_type),
+			be16_to_cpu(severity), be64_to_cpu(frozen_pe_no),
+			hose->global_number);
+		switch (be16_to_cpu(err_type)) {
+		case OPAL_EEH_IOC_ERROR:
+			if (be16_to_cpu(severity) == OPAL_EEH_SEV_IOC_DEAD) {
+				pr_err("EEH: dead IOC detected\n");
+				ret = EEH_NEXT_ERR_DEAD_IOC;
+			} else if (be16_to_cpu(severity) == OPAL_EEH_SEV_INF) {
+				pr_info("EEH: IOC informative error "
+					"detected\n");
+				pnv_eeh_get_and_dump_hub_diag(hose);
+				ret = EEH_NEXT_ERR_NONE;
+			}
+
+			break;
+		case OPAL_EEH_PHB_ERROR:
+			if (be16_to_cpu(severity) == OPAL_EEH_SEV_PHB_DEAD) {
+				*pe = phb_pe;
+				pr_err("EEH: dead PHB#%x detected, "
+				       "location: %s\n",
+					hose->global_number,
+					eeh_pe_loc_get(phb_pe));
+				ret = EEH_NEXT_ERR_DEAD_PHB;
+			} else if (be16_to_cpu(severity) ==
+				   OPAL_EEH_SEV_PHB_FENCED) {
+				*pe = phb_pe;
+				pr_err("EEH: Fenced PHB#%x detected, "
+				       "location: %s\n",
+					hose->global_number,
+					eeh_pe_loc_get(phb_pe));
+				ret = EEH_NEXT_ERR_FENCED_PHB;
+			} else if (be16_to_cpu(severity) == OPAL_EEH_SEV_INF) {
+				pr_info("EEH: PHB#%x informative error "
+					"detected, location: %s\n",
+					hose->global_number,
+					eeh_pe_loc_get(phb_pe));
+				pnv_eeh_get_phb_diag(phb_pe);
+				pnv_pci_dump_phb_diag_data(hose, phb_pe->data);
+				ret = EEH_NEXT_ERR_NONE;
+			}
+
+			break;
+		case OPAL_EEH_PE_ERROR:
+			/*
+			 * If we can't find the corresponding PE, we
+			 * just try to unfreeze.
+			 */
+			if (pnv_eeh_get_pe(hose,
+				be64_to_cpu(frozen_pe_no), pe)) {
+				/* Try best to clear it */
+				pr_info("EEH: Clear non-existing PHB#%x-PE#%llx\n",
+					hose->global_number, frozen_pe_no);
+				pr_info("EEH: PHB location: %s\n",
+					eeh_pe_loc_get(phb_pe));
+				opal_pci_eeh_freeze_clear(phb->opal_id,
+					frozen_pe_no,
+					OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+				ret = EEH_NEXT_ERR_NONE;
+			} else if ((*pe)->state & EEH_PE_ISOLATED ||
+				   eeh_pe_passed(*pe)) {
+				ret = EEH_NEXT_ERR_NONE;
+			} else {
+				pr_err("EEH: Frozen PE#%x "
+				       "on PHB#%x detected\n",
+				       (*pe)->addr,
+					(*pe)->phb->global_number);
+				pr_err("EEH: PE location: %s, "
+				       "PHB location: %s\n",
+				       eeh_pe_loc_get(*pe),
+				       eeh_pe_loc_get(phb_pe));
+				ret = EEH_NEXT_ERR_FROZEN_PE;
+			}
+
+			break;
+		default:
+			pr_warn("%s: Unexpected error type %d\n",
+				__func__, be16_to_cpu(err_type));
+		}
 
-	if (phb && phb->eeh_ops->next_error)
-		return phb->eeh_ops->next_error(pe);
+		/*
+		 * EEH core will try recover from fenced PHB or
+		 * frozen PE. In the time for frozen PE, EEH core
+		 * enable IO path for that before collecting logs,
+		 * but it ruins the site. So we have to dump the
+		 * log in advance here.
+		 */
+		if ((ret == EEH_NEXT_ERR_FROZEN_PE  ||
+		    ret == EEH_NEXT_ERR_FENCED_PHB) &&
+		    !((*pe)->state & EEH_PE_ISOLATED)) {
+			eeh_pe_state_mark(*pe, EEH_PE_ISOLATED);
+			pnv_eeh_get_phb_diag(*pe);
+
+			if (eeh_has_flag(EEH_EARLY_DUMP_LOG))
+				pnv_pci_dump_phb_diag_data((*pe)->phb,
+							   (*pe)->data);
+		}
 
-	return -EEXIST;
+		/*
+		 * We probably have the frozen parent PE out there and
+		 * we need have to handle frozen parent PE firstly.
+		 */
+		if (ret == EEH_NEXT_ERR_FROZEN_PE) {
+			parent_pe = (*pe)->parent;
+			while (parent_pe) {
+				/* Hit the ceiling ? */
+				if (parent_pe->type & EEH_PE_PHB)
+					break;
+
+				/* Frozen parent PE ? */
+				state = eeh_ops->get_state(parent_pe, NULL);
+				if (state > 0 &&
+				    (state & active_flags) != active_flags)
+					*pe = parent_pe;
+
+				/* Next parent level */
+				parent_pe = parent_pe->parent;
+			}
+
+			/* We possibly migrate to another PE */
+			eeh_pe_state_mark(*pe, EEH_PE_ISOLATED);
+		}
+
+		/*
+		 * If we have no errors on the specific PHB or only
+		 * informative error there, we continue poking it.
+		 * Otherwise, we need actions to be taken by upper
+		 * layer.
+		 */
+		if (ret > EEH_NEXT_ERR_INF)
+			break;
+	}
+
+	return ret;
 }
 
-static int powernv_eeh_restore_config(struct device_node *dn)
+static int pnv_eeh_restore_config(struct pci_dn *pdn)
 {
-	struct eeh_dev *edev = of_node_to_eeh_dev(dn);
+	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
 	struct pnv_phb *phb;
 	s64 ret;
 
@@ -490,24 +1501,23 @@ static int powernv_eeh_restore_config(struct device_node *dn)
 	return 0;
 }
 
-static struct eeh_ops powernv_eeh_ops = {
+static struct eeh_ops pnv_eeh_ops = {
 	.name                   = "powernv",
-	.init                   = powernv_eeh_init,
-	.post_init              = powernv_eeh_post_init,
-	.of_probe               = NULL,
-	.dev_probe              = powernv_eeh_dev_probe,
-	.set_option             = powernv_eeh_set_option,
-	.get_pe_addr            = powernv_eeh_get_pe_addr,
-	.get_state              = powernv_eeh_get_state,
-	.reset                  = powernv_eeh_reset,
-	.wait_state             = powernv_eeh_wait_state,
-	.get_log                = powernv_eeh_get_log,
-	.configure_bridge       = powernv_eeh_configure_bridge,
-	.err_inject		= powernv_eeh_err_inject,
-	.read_config            = powernv_eeh_read_config,
-	.write_config           = powernv_eeh_write_config,
-	.next_error		= powernv_eeh_next_error,
-	.restore_config		= powernv_eeh_restore_config
+	.init                   = pnv_eeh_init,
+	.post_init              = pnv_eeh_post_init,
+	.probe			= pnv_eeh_probe,
+	.set_option             = pnv_eeh_set_option,
+	.get_pe_addr            = pnv_eeh_get_pe_addr,
+	.get_state              = pnv_eeh_get_state,
+	.reset                  = pnv_eeh_reset,
+	.wait_state             = pnv_eeh_wait_state,
+	.get_log                = pnv_eeh_get_log,
+	.configure_bridge       = pnv_eeh_configure_bridge,
+	.err_inject		= pnv_eeh_err_inject,
+	.read_config            = pnv_eeh_read_config,
+	.write_config           = pnv_eeh_write_config,
+	.next_error		= pnv_eeh_next_error,
+	.restore_config		= pnv_eeh_restore_config
 };
 
 /**
@@ -521,7 +1531,7 @@ static int __init eeh_powernv_init(void)
 	int ret = -EINVAL;
 
 	eeh_set_pe_aux_size(PNV_PCI_DIAG_BUF_SIZE);
-	ret = eeh_ops_register(&powernv_eeh_ops);
+	ret = eeh_ops_register(&pnv_eeh_ops);
 	if (!ret)
 		pr_info("EEH: PowerNV platform initialized\n");
 	else
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 6c9ff2b95119..76b344125cef 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1777,7 +1777,8 @@ static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
 				region.start += phb->ioda.io_segsize;
 				index++;
 			}
-		} else if (res->flags & IORESOURCE_MEM) {
+		} else if ((res->flags & IORESOURCE_MEM) &&
+			   !pnv_pci_is_mem_pref_64(res->flags)) {
 			region.start = res->start -
 				       hose->mem_offset[0] -
 				       phb->ioda.m32_pci_base;
@@ -2078,9 +2079,6 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	phb->get_pe_state = pnv_ioda_get_pe_state;
 	phb->freeze_pe = pnv_ioda_freeze_pe;
 	phb->unfreeze_pe = pnv_ioda_unfreeze_pe;
-#ifdef CONFIG_EEH
-	phb->eeh_ops = &ioda_eeh_ops;
-#endif
 
 	/* Setup RID -> PE mapping function */
 	phb->bdfn_to_pe = pnv_ioda_bdfn_to_pe;
@@ -2121,8 +2119,8 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	 */
 	if (is_kdump_kernel()) {
 		pr_info("  Issue PHB reset ...\n");
-		ioda_eeh_phb_reset(hose, EEH_RESET_FUNDAMENTAL);
-		ioda_eeh_phb_reset(hose, EEH_RESET_DEACTIVATE);
+		pnv_eeh_phb_reset(hose, EEH_RESET_FUNDAMENTAL);
+		pnv_eeh_phb_reset(hose, EEH_RESET_DEACTIVATE);
 	}
 
 	/* Remove M64 resource if we can't configure it successfully */
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 54323d6b5166..946aa3d62c3c 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -366,9 +366,9 @@ static void pnv_pci_handle_eeh_config(struct pnv_phb *phb, u32 pe_no)
 	spin_unlock_irqrestore(&phb->lock, flags);
 }
 
-static void pnv_pci_config_check_eeh(struct pnv_phb *phb,
-				     struct device_node *dn)
+static void pnv_pci_config_check_eeh(struct pci_dn *pdn)
 {
+	struct pnv_phb *phb = pdn->phb->private_data;
 	u8	fstate;
 	__be16	pcierr;
 	int	pe_no;
@@ -379,7 +379,7 @@ static void pnv_pci_config_check_eeh(struct pnv_phb *phb,
 	 * setup that yet. So all ER errors should be mapped to
 	 * reserved PE.
 	 */
-	pe_no = PCI_DN(dn)->pe_number;
+	pe_no = pdn->pe_number;
 	if (pe_no == IODA_INVALID_PE) {
 		if (phb->type == PNV_PHB_P5IOC2)
 			pe_no = 0;
@@ -407,8 +407,7 @@ static void pnv_pci_config_check_eeh(struct pnv_phb *phb,
 	}
 
 	cfg_dbg(" -> EEH check, bdfn=%04x PE#%d fstate=%x\n",
-		(PCI_DN(dn)->busno << 8) | (PCI_DN(dn)->devfn),
-		pe_no, fstate);
+		(pdn->busno << 8) | (pdn->devfn), pe_no, fstate);
 
 	/* Clear the frozen state if applicable */
 	if (fstate == OPAL_EEH_STOPPED_MMIO_FREEZE ||
@@ -425,10 +424,9 @@ static void pnv_pci_config_check_eeh(struct pnv_phb *phb,
 	}
 }
 
-int pnv_pci_cfg_read(struct device_node *dn,
+int pnv_pci_cfg_read(struct pci_dn *pdn,
 		     int where, int size, u32 *val)
 {
-	struct pci_dn *pdn = PCI_DN(dn);
 	struct pnv_phb *phb = pdn->phb->private_data;
 	u32 bdfn = (pdn->busno << 8) | pdn->devfn;
 	s64 rc;
@@ -462,10 +460,9 @@ int pnv_pci_cfg_read(struct device_node *dn,
 	return PCIBIOS_SUCCESSFUL;
 }
 
-int pnv_pci_cfg_write(struct device_node *dn,
+int pnv_pci_cfg_write(struct pci_dn *pdn,
 		      int where, int size, u32 val)
 {
-	struct pci_dn *pdn = PCI_DN(dn);
 	struct pnv_phb *phb = pdn->phb->private_data;
 	u32 bdfn = (pdn->busno << 8) | pdn->devfn;
 
@@ -489,18 +486,17 @@ int pnv_pci_cfg_write(struct device_node *dn,
 }
 
 #if CONFIG_EEH
-static bool pnv_pci_cfg_check(struct pci_controller *hose,
-			      struct device_node *dn)
+static bool pnv_pci_cfg_check(struct pci_dn *pdn)
 {
 	struct eeh_dev *edev = NULL;
-	struct pnv_phb *phb = hose->private_data;
+	struct pnv_phb *phb = pdn->phb->private_data;
 
 	/* EEH not enabled ? */
 	if (!(phb->flags & PNV_PHB_FLAG_EEH))
 		return true;
 
 	/* PE reset or device removed ? */
-	edev = of_node_to_eeh_dev(dn);
+	edev = pdn->edev;
 	if (edev) {
 		if (edev->pe &&
 		    (edev->pe->state & EEH_PE_CFG_BLOCKED))
@@ -513,8 +509,7 @@ static bool pnv_pci_cfg_check(struct pci_controller *hose,
 	return true;
 }
 #else
-static inline pnv_pci_cfg_check(struct pci_controller *hose,
-				struct device_node *dn)
+static inline pnv_pci_cfg_check(struct pci_dn *pdn)
 {
 	return true;
 }
@@ -524,32 +519,26 @@ static int pnv_pci_read_config(struct pci_bus *bus,
 			       unsigned int devfn,
 			       int where, int size, u32 *val)
 {
-	struct device_node *dn, *busdn = pci_bus_to_OF_node(bus);
 	struct pci_dn *pdn;
 	struct pnv_phb *phb;
-	bool found = false;
 	int ret;
 
 	*val = 0xFFFFFFFF;
-	for (dn = busdn->child; dn; dn = dn->sibling) {
-		pdn = PCI_DN(dn);
-		if (pdn && pdn->devfn == devfn) {
-			phb = pdn->phb->private_data;
-			found = true;
-			break;
-		}
-	}
+	pdn = pci_get_pdn_by_devfn(bus, devfn);
+	if (!pdn)
+		return PCIBIOS_DEVICE_NOT_FOUND;
 
-	if (!found || !pnv_pci_cfg_check(pdn->phb, dn))
+	if (!pnv_pci_cfg_check(pdn))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
-	ret = pnv_pci_cfg_read(dn, where, size, val);
-	if (phb->flags & PNV_PHB_FLAG_EEH) {
+	ret = pnv_pci_cfg_read(pdn, where, size, val);
+	phb = pdn->phb->private_data;
+	if (phb->flags & PNV_PHB_FLAG_EEH && pdn->edev) {
 		if (*val == EEH_IO_ERROR_VALUE(size) &&
-		    eeh_dev_check_failure(of_node_to_eeh_dev(dn)))
+		    eeh_dev_check_failure(pdn->edev))
                         return PCIBIOS_DEVICE_NOT_FOUND;
 	} else {
-		pnv_pci_config_check_eeh(phb, dn);
+		pnv_pci_config_check_eeh(pdn);
 	}
 
 	return ret;
@@ -559,27 +548,21 @@ static int pnv_pci_write_config(struct pci_bus *bus,
 				unsigned int devfn,
 				int where, int size, u32 val)
 {
-	struct device_node *dn, *busdn = pci_bus_to_OF_node(bus);
 	struct pci_dn *pdn;
 	struct pnv_phb *phb;
-	bool found = false;
 	int ret;
 
-	for (dn = busdn->child; dn; dn = dn->sibling) {
-		pdn = PCI_DN(dn);
-		if (pdn && pdn->devfn == devfn) {
-			phb = pdn->phb->private_data;
-			found = true;
-			break;
-		}
-	}
+	pdn = pci_get_pdn_by_devfn(bus, devfn);
+	if (!pdn)
+		return PCIBIOS_DEVICE_NOT_FOUND;
 
-	if (!found || !pnv_pci_cfg_check(pdn->phb, dn))
+	if (!pnv_pci_cfg_check(pdn))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
-	ret = pnv_pci_cfg_write(dn, where, size, val);
+	ret = pnv_pci_cfg_write(pdn, where, size, val);
+	phb = pdn->phb->private_data;
 	if (!(phb->flags & PNV_PHB_FLAG_EEH))
-		pnv_pci_config_check_eeh(phb, dn);
+		pnv_pci_config_check_eeh(pdn);
 
 	return ret;
 }
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 6c02ff8dd69f..1f0cb66133a1 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -75,22 +75,6 @@ struct pnv_ioda_pe {
 	struct list_head	list;
 };
 
-/* IOC dependent EEH operations */
-#ifdef CONFIG_EEH
-struct pnv_eeh_ops {
-	int (*post_init)(struct pci_controller *hose);
-	int (*set_option)(struct eeh_pe *pe, int option);
-	int (*get_state)(struct eeh_pe *pe);
-	int (*reset)(struct eeh_pe *pe, int option);
-	int (*get_log)(struct eeh_pe *pe, int severity,
-		       char *drv_log, unsigned long len);
-	int (*configure_bridge)(struct eeh_pe *pe);
-	int (*err_inject)(struct eeh_pe *pe, int type, int func,
-			  unsigned long addr, unsigned long mask);
-	int (*next_error)(struct eeh_pe **pe);
-};
-#endif /* CONFIG_EEH */
-
 #define PNV_PHB_FLAG_EEH	(1 << 0)
 
 struct pnv_phb {
@@ -104,10 +88,6 @@ struct pnv_phb {
 	int			initialized;
 	spinlock_t		lock;
 
-#ifdef CONFIG_EEH
-	struct pnv_eeh_ops	*eeh_ops;
-#endif
-
 #ifdef CONFIG_DEBUG_FS
 	int			has_dbgfs;
 	struct dentry		*dbgfs;
@@ -213,15 +193,12 @@ struct pnv_phb {
 };
 
 extern struct pci_ops pnv_pci_ops;
-#ifdef CONFIG_EEH
-extern struct pnv_eeh_ops ioda_eeh_ops;
-#endif
 
 void pnv_pci_dump_phb_diag_data(struct pci_controller *hose,
 				unsigned char *log_buff);
-int pnv_pci_cfg_read(struct device_node *dn,
+int pnv_pci_cfg_read(struct pci_dn *pdn,
 		     int where, int size, u32 *val);
-int pnv_pci_cfg_write(struct device_node *dn,
+int pnv_pci_cfg_write(struct pci_dn *pdn,
 		      int where, int size, u32 val);
 extern void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
 				      void *tce_mem, u64 tce_size,
@@ -232,6 +209,6 @@ extern void pnv_pci_init_ioda2_phb(struct device_node *np);
 extern void pnv_pci_ioda_tce_invalidate(struct iommu_table *tbl,
 					__be64 *startp, __be64 *endp, bool rm);
 extern void pnv_pci_reset_secondary_bus(struct pci_dev *dev);
-extern int ioda_eeh_phb_reset(struct pci_controller *hose, int option);
+extern int pnv_eeh_phb_reset(struct pci_controller *hose, int option);
 
 #endif /* __POWERNV_PCI_H */
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index a6c7e19f5eb3..2039397cc75d 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -118,9 +118,8 @@ static int pseries_eeh_init(void)
 	return 0;
 }
 
-static int pseries_eeh_cap_start(struct device_node *dn)
+static int pseries_eeh_cap_start(struct pci_dn *pdn)
 {
-	struct pci_dn *pdn = PCI_DN(dn);
 	u32 status;
 
 	if (!pdn)
@@ -134,10 +133,9 @@ static int pseries_eeh_cap_start(struct device_node *dn)
 }
 
 
-static int pseries_eeh_find_cap(struct device_node *dn, int cap)
+static int pseries_eeh_find_cap(struct pci_dn *pdn, int cap)
 {
-	struct pci_dn *pdn = PCI_DN(dn);
-	int pos = pseries_eeh_cap_start(dn);
+	int pos = pseries_eeh_cap_start(pdn);
 	int cnt = 48;	/* Maximal number of capabilities */
 	u32 id;
 
@@ -160,10 +158,9 @@ static int pseries_eeh_find_cap(struct device_node *dn, int cap)
 	return 0;
 }
 
-static int pseries_eeh_find_ecap(struct device_node *dn, int cap)
+static int pseries_eeh_find_ecap(struct pci_dn *pdn, int cap)
 {
-	struct pci_dn *pdn = PCI_DN(dn);
-	struct eeh_dev *edev = of_node_to_eeh_dev(dn);
+	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
 	u32 header;
 	int pos = 256;
 	int ttl = (4096 - 256) / 8;
@@ -191,53 +188,44 @@ static int pseries_eeh_find_ecap(struct device_node *dn, int cap)
 }
 
 /**
- * pseries_eeh_of_probe - EEH probe on the given device
- * @dn: OF node
- * @flag: Unused
+ * pseries_eeh_probe - EEH probe on the given device
+ * @pdn: PCI device node
+ * @data: Unused
  *
  * When EEH module is installed during system boot, all PCI devices
  * are checked one by one to see if it supports EEH. The function
  * is introduced for the purpose.
  */
-static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
+static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
 {
 	struct eeh_dev *edev;
 	struct eeh_pe pe;
-	struct pci_dn *pdn = PCI_DN(dn);
-	const __be32 *classp, *vendorp, *devicep;
-	u32 class_code;
-	const __be32 *regs;
 	u32 pcie_flags;
 	int enable = 0;
 	int ret;
 
 	/* Retrieve OF node and eeh device */
-	edev = of_node_to_eeh_dev(dn);
-	if (edev->pe || !of_device_is_available(dn))
+	edev = pdn_to_eeh_dev(pdn);
+	if (!edev || edev->pe)
 		return NULL;
 
-	/* Retrieve class/vendor/device IDs */
-	classp = of_get_property(dn, "class-code", NULL);
-	vendorp = of_get_property(dn, "vendor-id", NULL);
-	devicep = of_get_property(dn, "device-id", NULL);
-
-	/* Skip for bad OF node or PCI-ISA bridge */
-	if (!classp || !vendorp || !devicep)
-		return NULL;
-	if (dn->type && !strcmp(dn->type, "isa"))
+	/* Check class/vendor/device IDs */
+	if (!pdn->vendor_id || !pdn->device_id || !pdn->class_code)
 		return NULL;
 
-	class_code = of_read_number(classp, 1);
+	/* Skip for PCI-ISA bridge */
+        if ((pdn->class_code >> 8) == PCI_CLASS_BRIDGE_ISA)
+		return NULL;
 
 	/*
 	 * Update class code and mode of eeh device. We need
 	 * correctly reflects that current device is root port
 	 * or PCIe switch downstream port.
 	 */
-	edev->class_code = class_code;
-	edev->pcix_cap = pseries_eeh_find_cap(dn, PCI_CAP_ID_PCIX);
-	edev->pcie_cap = pseries_eeh_find_cap(dn, PCI_CAP_ID_EXP);
-	edev->aer_cap = pseries_eeh_find_ecap(dn, PCI_EXT_CAP_ID_ERR);
+	edev->class_code = pdn->class_code;
+	edev->pcix_cap = pseries_eeh_find_cap(pdn, PCI_CAP_ID_PCIX);
+	edev->pcie_cap = pseries_eeh_find_cap(pdn, PCI_CAP_ID_EXP);
+	edev->aer_cap = pseries_eeh_find_ecap(pdn, PCI_EXT_CAP_ID_ERR);
 	edev->mode &= 0xFFFFFF00;
 	if ((edev->class_code >> 8) == PCI_CLASS_BRIDGE_PCI) {
 		edev->mode |= EEH_DEV_BRIDGE;
@@ -252,24 +240,16 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
 		}
 	}
 
-	/* Retrieve the device address */
-	regs = of_get_property(dn, "reg", NULL);
-	if (!regs) {
-		pr_warn("%s: OF node property %s::reg not found\n",
-			__func__, dn->full_name);
-		return NULL;
-	}
-
 	/* Initialize the fake PE */
 	memset(&pe, 0, sizeof(struct eeh_pe));
 	pe.phb = edev->phb;
-	pe.config_addr = of_read_number(regs, 1);
+	pe.config_addr = (pdn->busno << 16) | (pdn->devfn << 8);
 
 	/* Enable EEH on the device */
 	ret = eeh_ops->set_option(&pe, EEH_OPT_ENABLE);
 	if (!ret) {
-		edev->config_addr = of_read_number(regs, 1);
 		/* Retrieve PE address */
+		edev->config_addr = (pdn->busno << 16) | (pdn->devfn << 8);
 		edev->pe_config_addr = eeh_ops->get_pe_addr(&pe);
 		pe.addr = edev->pe_config_addr;
 
@@ -285,16 +265,17 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
 			eeh_add_flag(EEH_ENABLED);
 			eeh_add_to_parent_pe(edev);
 
-			pr_debug("%s: EEH enabled on %s PHB#%d-PE#%x, config addr#%x\n",
-				__func__, dn->full_name, pe.phb->global_number,
-				pe.addr, pe.config_addr);
-		} else if (dn->parent && of_node_to_eeh_dev(dn->parent) &&
-			   (of_node_to_eeh_dev(dn->parent))->pe) {
+			pr_debug("%s: EEH enabled on %02x:%02x.%01x PHB#%d-PE#%x\n",
+				__func__, pdn->busno, PCI_SLOT(pdn->devfn),
+				PCI_FUNC(pdn->devfn), pe.phb->global_number,
+				pe.addr);
+		} else if (pdn->parent && pdn_to_eeh_dev(pdn->parent) &&
+			   (pdn_to_eeh_dev(pdn->parent))->pe) {
 			/* This device doesn't support EEH, but it may have an
 			 * EEH parent, in which case we mark it as supported.
 			 */
-			edev->config_addr = of_node_to_eeh_dev(dn->parent)->config_addr;
-			edev->pe_config_addr = of_node_to_eeh_dev(dn->parent)->pe_config_addr;
+			edev->config_addr = pdn_to_eeh_dev(pdn->parent)->config_addr;
+			edev->pe_config_addr = pdn_to_eeh_dev(pdn->parent)->pe_config_addr;
 			eeh_add_to_parent_pe(edev);
 		}
 	}
@@ -670,45 +651,36 @@ static int pseries_eeh_configure_bridge(struct eeh_pe *pe)
 
 /**
  * pseries_eeh_read_config - Read PCI config space
- * @dn: device node
+ * @pdn: PCI device node
  * @where: PCI address
  * @size: size to read
  * @val: return value
  *
  * Read config space from the speicifed device
  */
-static int pseries_eeh_read_config(struct device_node *dn, int where, int size, u32 *val)
+static int pseries_eeh_read_config(struct pci_dn *pdn, int where, int size, u32 *val)
 {
-	struct pci_dn *pdn;
-
-	pdn = PCI_DN(dn);
-
 	return rtas_read_config(pdn, where, size, val);
 }
 
 /**
  * pseries_eeh_write_config - Write PCI config space
- * @dn: device node
+ * @pdn: PCI device node
  * @where: PCI address
  * @size: size to write
  * @val: value to be written
  *
  * Write config space to the specified device
  */
-static int pseries_eeh_write_config(struct device_node *dn, int where, int size, u32 val)
+static int pseries_eeh_write_config(struct pci_dn *pdn, int where, int size, u32 val)
 {
-	struct pci_dn *pdn;
-
-	pdn = PCI_DN(dn);
-
 	return rtas_write_config(pdn, where, size, val);
 }
 
 static struct eeh_ops pseries_eeh_ops = {
 	.name			= "pseries",
 	.init			= pseries_eeh_init,
-	.of_probe		= pseries_eeh_of_probe,
-	.dev_probe		= NULL,
+	.probe			= pseries_eeh_probe,
 	.set_option		= pseries_eeh_set_option,
 	.get_pe_addr		= pseries_eeh_get_pe_addr,
 	.get_state		= pseries_eeh_get_state,
diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c
index 691a154c286d..c8d24f9a6948 100644
--- a/arch/powerpc/platforms/pseries/msi.c
+++ b/arch/powerpc/platforms/pseries/msi.c
@@ -195,6 +195,7 @@ static struct device_node *find_pe_total_msi(struct pci_dev *dev, int *total)
 static struct device_node *find_pe_dn(struct pci_dev *dev, int *total)
 {
 	struct device_node *dn;
+	struct pci_dn *pdn;
 	struct eeh_dev *edev;
 
 	/* Found our PE and assume 8 at that point. */
@@ -204,10 +205,11 @@ static struct device_node *find_pe_dn(struct pci_dev *dev, int *total)
 		return NULL;
 
 	/* Get the top level device in the PE */
-	edev = of_node_to_eeh_dev(dn);
+	edev = pdn_to_eeh_dev(PCI_DN(dn));
 	if (edev->pe)
 		edev = list_first_entry(&edev->pe->edevs, struct eeh_dev, list);
-	dn = eeh_dev_to_of_node(edev);
+	pdn = eeh_dev_to_pdn(edev);
+	dn = pdn ? pdn->node : NULL;
 	if (!dn)
 		return NULL;
 
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index 89e23811199c..f735f4fee48c 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -82,7 +82,7 @@ struct pci_controller *init_phb_dynamic(struct device_node *dn)
 	eeh_dev_phb_init_dynamic(phb);
 
 	if (dn->child)
-		eeh_add_device_tree_early(dn);
+		eeh_add_device_tree_early(PCI_DN(dn));
 
 	pcibios_scan_phb(phb);
 	pcibios_finish_adding_to_bus(phb->bus);
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index e445b6701f50..70304070a260 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -265,7 +265,7 @@ static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long act
 			update_dn_pci_info(np, pci->phb);
 
 			/* Create EEH device for the OF node */
-			eeh_dev_init(np, pci->phb);
+			eeh_dev_init(PCI_DN(np), pci->phb);
 		}
 		break;
 	default:
diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c
index 238482495e81..77d6453f6a3e 100644
--- a/drivers/net/ethernet/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -2523,9 +2523,7 @@ int efx_try_recovery(struct efx_nic *efx)
 	 * schedule a 'recover or reset', leading to this recovery handler.
 	 * Manually call the eeh failure check function.
 	 */
-	struct eeh_dev *eehdev =
-		of_node_to_eeh_dev(pci_device_to_OF_node(efx->pci_dev));
-
+	struct eeh_dev *eehdev = pci_dev_to_eeh_dev(efx->pci_dev);
 	if (eeh_dev_check_failure(eehdev)) {
 		/* The EEH mechanisms will handle the error and reset the
 		 * device if necessary.
diff --git a/drivers/net/ethernet/sfc/siena.c b/drivers/net/ethernet/sfc/siena.c
index 3583f0208a6e..f12c811938d2 100644
--- a/drivers/net/ethernet/sfc/siena.c
+++ b/drivers/net/ethernet/sfc/siena.c
@@ -205,8 +205,7 @@ static int siena_map_reset_flags(u32 *flags)
  */
 static void siena_monitor(struct efx_nic *efx)
 {
-	struct eeh_dev *eehdev =
-		of_node_to_eeh_dev(pci_device_to_OF_node(efx->pci_dev));
+	struct eeh_dev *eehdev = pci_dev_to_eeh_dev(efx->pci_dev);
 
 	eeh_dev_check_failure(eehdev);
 }
diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c
index 7660232ef460..e12bafdc42e0 100644
--- a/drivers/pci/hotplug/rpadlpar_core.c
+++ b/drivers/pci/hotplug/rpadlpar_core.c
@@ -146,7 +146,7 @@ static void dlpar_pci_add_bus(struct device_node *dn)
 	struct pci_controller *phb = pdn->phb;
 	struct pci_dev *dev = NULL;
 
-	eeh_add_device_tree_early(dn);
+	eeh_add_device_tree_early(pdn);
 
 	/* Add EADS device to PHB bus, adding new entry to bus->devices */
 	dev = of_create_pci_dev(dn, phb->bus, pdn->devfn);