summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorMagnus Damm <magnus.damm@gmail.com>2007-09-29 07:42:16 +0200
committerDavid S. Miller <davem@sunset.davemloft.net>2007-10-11 01:53:56 +0200
commit89e536a190f90d038bae7905a0c582cb7089b739 (patch)
tree3d9f7dc5c750c8adcadf568e98f12395bd7c5b68
parentPHYLIB: fix an interrupt loop potential when halting (diff)
downloadlinux-89e536a190f90d038bae7905a0c582cb7089b739.tar.xz
linux-89e536a190f90d038bae7905a0c582cb7089b739.zip
ax88796: add 93cx6 eeprom support
Hook up the 93cx6 eeprom code to the ax88796 driver and modify the ax88796 driver to read out the mac address from the eeprom. We need this for the ax88796 on certain SuperH boards. The pin configuration used to connect the eeprom to the ax88796 on these boards is the same as pointed out by the ax88796 datasheet, so we can probably reuse this code for multiple platforms in the future. Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-rw-r--r--drivers/net/Kconfig7
-rw-r--r--drivers/net/ax88796.c49
-rw-r--r--include/linux/eeprom_93cx6.h3
-rw-r--r--include/net/ax88796.h1
4 files changed, 59 insertions, 1 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 9ff1cf46eaee..45f6cf531566 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -240,6 +240,13 @@ config AX88796
AX88796 driver, using platform bus to provide
chip detection and resources
+config AX88796_93CX6
+ bool "ASIX AX88796 external 93CX6 eeprom support"
+ depends on AX88796
+ select EEPROM_93CX6
+ help
+ Select this if your platform comes with an external 93CX6 eeprom.
+
config MACE
tristate "MACE (Power Mac ethernet) support"
depends on PPC_PMAC && PPC32
diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
index 90e0734e6037..9fe0517cf893 100644
--- a/drivers/net/ax88796.c
+++ b/drivers/net/ax88796.c
@@ -24,6 +24,7 @@
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
+#include <linux/eeprom_93cx6.h>
#include <net/ax88796.h>
@@ -582,6 +583,37 @@ static const struct ethtool_ops ax_ethtool_ops = {
.get_link = ax_get_link,
};
+#ifdef CONFIG_AX88796_93CX6
+static void ax_eeprom_register_read(struct eeprom_93cx6 *eeprom)
+{
+ struct ei_device *ei_local = eeprom->data;
+ u8 reg = ei_inb(ei_local->mem + AX_MEMR);
+
+ eeprom->reg_data_in = reg & AX_MEMR_EEI;
+ eeprom->reg_data_out = reg & AX_MEMR_EEO; /* Input pin */
+ eeprom->reg_data_clock = reg & AX_MEMR_EECLK;
+ eeprom->reg_chip_select = reg & AX_MEMR_EECS;
+}
+
+static void ax_eeprom_register_write(struct eeprom_93cx6 *eeprom)
+{
+ struct ei_device *ei_local = eeprom->data;
+ u8 reg = ei_inb(ei_local->mem + AX_MEMR);
+
+ reg &= ~(AX_MEMR_EEI | AX_MEMR_EECLK | AX_MEMR_EECS);
+
+ if (eeprom->reg_data_in)
+ reg |= AX_MEMR_EEI;
+ if (eeprom->reg_data_clock)
+ reg |= AX_MEMR_EECLK;
+ if (eeprom->reg_chip_select)
+ reg |= AX_MEMR_EECS;
+
+ ei_outb(reg, ei_local->mem + AX_MEMR);
+ udelay(10);
+}
+#endif
+
/* setup code */
static void ax_initial_setup(struct net_device *dev, struct ei_device *ei_local)
@@ -640,6 +672,23 @@ static int ax_init_dev(struct net_device *dev, int first_init)
memcpy(dev->dev_addr, SA_prom, 6);
}
+#ifdef CONFIG_AX88796_93CX6
+ if (first_init && ax->plat->flags & AXFLG_HAS_93CX6) {
+ unsigned char mac_addr[6];
+ struct eeprom_93cx6 eeprom;
+
+ eeprom.data = ei_local;
+ eeprom.register_read = ax_eeprom_register_read;
+ eeprom.register_write = ax_eeprom_register_write;
+ eeprom.width = PCI_EEPROM_WIDTH_93C56;
+
+ eeprom_93cx6_multiread(&eeprom, 0,
+ (__le16 __force *)mac_addr,
+ sizeof(mac_addr) >> 1);
+
+ memcpy(dev->dev_addr, mac_addr, 6);
+ }
+#endif
if (ax->plat->wordlength == 2) {
/* We must set the 8390 for word mode. */
ei_outb(ax->plat->dcr_val, ei_local->mem + EN0_DCFG);
diff --git a/include/linux/eeprom_93cx6.h b/include/linux/eeprom_93cx6.h
index d774b7778c91..a55c873e8b66 100644
--- a/include/linux/eeprom_93cx6.h
+++ b/include/linux/eeprom_93cx6.h
@@ -21,13 +21,14 @@
/*
Module: eeprom_93cx6
Abstract: EEPROM reader datastructures for 93cx6 chipsets.
- Supported chipsets: 93c46 & 93c66.
+ Supported chipsets: 93c46, 93c56 and 93c66.
*/
/*
* EEPROM operation defines.
*/
#define PCI_EEPROM_WIDTH_93C46 6
+#define PCI_EEPROM_WIDTH_93C56 8
#define PCI_EEPROM_WIDTH_93C66 8
#define PCI_EEPROM_WIDTH_OPCODE 3
#define PCI_EEPROM_WRITE_OPCODE 0x05
diff --git a/include/net/ax88796.h b/include/net/ax88796.h
index ee786a043b3d..51329dae44e6 100644
--- a/include/net/ax88796.h
+++ b/include/net/ax88796.h
@@ -14,6 +14,7 @@
#define AXFLG_HAS_EEPROM (1<<0)
#define AXFLG_MAC_FROMDEV (1<<1) /* device already has MAC */
+#define AXFLG_HAS_93CX6 (1<<2) /* use eeprom_93cx6 driver */
struct ax_plat_data {
unsigned int flags;