summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJiri Slaby <jslaby@suse.cz>2013-01-03 15:53:06 +0100
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2013-01-16 07:30:15 +0100
commit2e124b4a390ca85325fae75764bef92f0547fa25 (patch)
tree5519fbcdbe954e79b271ea6d31ac5a4dc754c4f5
parentTTY: move low_latency to tty_port (diff)
downloadlinux-2e124b4a390ca85325fae75764bef92f0547fa25.tar.xz
linux-2e124b4a390ca85325fae75764bef92f0547fa25.zip
TTY: switch tty_flip_buffer_push
Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. Now, the one where most of tty_port_tty_get gets removed: tty_flip_buffer_push. IOW we also closed all the races in drivers not using tty_port_tty_get at all yet. Also we move tty_flip_buffer_push declaration from include/linux/tty.h to include/linux/tty_flip.h to all others while we are changing it anyway. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-rw-r--r--arch/ia64/hp/sim/simserial.c18
-rw-r--r--arch/mn10300/kernel/mn10300-serial.c7
-rw-r--r--arch/parisc/kernel/pdc_cons.c8
-rw-r--r--arch/um/drivers/chan.h3
-rw-r--r--arch/um/drivers/chan_kern.c14
-rw-r--r--arch/um/drivers/line.c7
-rw-r--r--arch/xtensa/platforms/iss/console.c9
-rw-r--r--drivers/char/pcmcia/synclink_cs.c14
-rw-r--r--drivers/ipack/devices/ipoctal.c14
-rw-r--r--drivers/isdn/gigaset/interface.c10
-rw-r--r--drivers/isdn/i4l/isdn_tty.c39
-rw-r--r--drivers/mmc/card/sdio_uart.c14
-rw-r--r--drivers/net/usb/hso.c31
-rw-r--r--drivers/s390/char/con3215.c4
-rw-r--r--drivers/s390/char/sclp_tty.c4
-rw-r--r--drivers/s390/char/sclp_vt220.c8
-rw-r--r--drivers/staging/ccg/u_serial.c11
-rw-r--r--drivers/staging/dgrp/dgrp_net_ops.c4
-rw-r--r--drivers/staging/fwserial/fwserial.c41
-rw-r--r--drivers/staging/serqt_usb2/serqt_usb2.c9
-rw-r--r--drivers/tty/amiserial.c5
-rw-r--r--drivers/tty/bfin_jtag_comm.c22
-rw-r--r--drivers/tty/ehv_bytechan.c9
-rw-r--r--drivers/tty/hvc/hvc_console.c2
-rw-r--r--drivers/tty/hvc/hvcs.c2
-rw-r--r--drivers/tty/hvc/hvsi.c6
-rw-r--r--drivers/tty/ipwireless/tty.c8
-rw-r--r--drivers/tty/isicom.c4
-rw-r--r--drivers/tty/mxser.c2
-rw-r--r--drivers/tty/n_gsm.c58
-rw-r--r--drivers/tty/nozomi.c14
-rw-r--r--drivers/tty/pty.c2
-rw-r--r--drivers/tty/rocket.c25
-rw-r--r--drivers/tty/serial/21285.c3
-rw-r--r--drivers/tty/serial/8250/8250.c3
-rw-r--r--drivers/tty/serial/altera_jtaguart.c2
-rw-r--r--drivers/tty/serial/altera_uart.c2
-rw-r--r--drivers/tty/serial/amba-pl010.c3
-rw-r--r--drivers/tty/serial/amba-pl011.c7
-rw-r--r--drivers/tty/serial/apbuart.c3
-rw-r--r--drivers/tty/serial/ar933x_uart.c7
-rw-r--r--drivers/tty/serial/arc_uart.c8
-rw-r--r--drivers/tty/serial/atmel_serial.c5
-rw-r--r--drivers/tty/serial/bcm63xx_uart.c4
-rw-r--r--drivers/tty/serial/bfin_sport_uart.c4
-rw-r--r--drivers/tty/serial/bfin_uart.c10
-rw-r--r--drivers/tty/serial/clps711x.c8
-rw-r--r--drivers/tty/serial/cpm_uart/cpm_uart_core.c3
-rw-r--r--drivers/tty/serial/crisv10.c17
-rw-r--r--drivers/tty/serial/dz.c4
-rw-r--r--drivers/tty/serial/efm32-uart.c8
-rw-r--r--drivers/tty/serial/icom.c3
-rw-r--r--drivers/tty/serial/ifx6x60.c6
-rw-r--r--drivers/tty/serial/imx.c3
-rw-r--r--drivers/tty/serial/ioc3_serial.c6
-rw-r--r--drivers/tty/serial/ioc4_serial.c6
-rw-r--r--drivers/tty/serial/jsm/jsm_tty.c2
-rw-r--r--drivers/tty/serial/kgdb_nmi.c10
-rw-r--r--drivers/tty/serial/lantiq.c15
-rw-r--r--drivers/tty/serial/lpc32xx_hs.c16
-rw-r--r--drivers/tty/serial/m32r_sio.c3
-rw-r--r--drivers/tty/serial/max3100.c8
-rw-r--r--drivers/tty/serial/max310x.c8
-rw-r--r--drivers/tty/serial/mcf.c2
-rw-r--r--drivers/tty/serial/mfd.c12
-rw-r--r--drivers/tty/serial/mpc52xx_uart.c3
-rw-r--r--drivers/tty/serial/mpsc.c5
-rw-r--r--drivers/tty/serial/mrst_max3110.c11
-rw-r--r--drivers/tty/serial/msm_serial.c6
-rw-r--r--drivers/tty/serial/msm_serial_hs.c3
-rw-r--r--drivers/tty/serial/msm_smd_tty.c2
-rw-r--r--drivers/tty/serial/mux.c6
-rw-r--r--drivers/tty/serial/mxs-auart.c6
-rw-r--r--drivers/tty/serial/netx-serial.c4
-rw-r--r--drivers/tty/serial/nwpserial.c3
-rw-r--r--drivers/tty/serial/omap-serial.c3
-rw-r--r--drivers/tty/serial/pch_uart.c19
-rw-r--r--drivers/tty/serial/pmac_zilog.c30
-rw-r--r--drivers/tty/serial/pnx8xxx_uart.c3
-rw-r--r--drivers/tty/serial/pxa.c3
-rw-r--r--drivers/tty/serial/sa1100.c3
-rw-r--r--drivers/tty/serial/samsung.c3
-rw-r--r--drivers/tty/serial/sb1250-duart.c2
-rw-r--r--drivers/tty/serial/sc26xx.c27
-rw-r--r--drivers/tty/serial/sccnxp.c8
-rw-r--r--drivers/tty/serial/serial_ks8695.c3
-rw-r--r--drivers/tty/serial/serial_txx9.c3
-rw-r--r--drivers/tty/serial/sh-sci.c18
-rw-r--r--drivers/tty/serial/sirfsoc_uart.c8
-rw-r--r--drivers/tty/serial/sn_console.c12
-rw-r--r--drivers/tty/serial/sunhv.c16
-rw-r--r--drivers/tty/serial/sunsab.c20
-rw-r--r--drivers/tty/serial/sunsu.c13
-rw-r--r--drivers/tty/serial/sunzilog.c28
-rw-r--r--drivers/tty/serial/timbuart.c2
-rw-r--r--drivers/tty/serial/uartlite.c2
-rw-r--r--drivers/tty/serial/ucc_uart.c3
-rw-r--r--drivers/tty/serial/vr41xx_siu.c4
-rw-r--r--drivers/tty/serial/vt8500_serial.c12
-rw-r--r--drivers/tty/serial/xilinx_uartps.c14
-rw-r--r--drivers/tty/serial/zs.c2
-rw-r--r--drivers/tty/synclink.c5
-rw-r--r--drivers/tty/synclink_gt.c5
-rw-r--r--drivers/tty/synclinkmp.c4
-rw-r--r--drivers/tty/tty_buffer.c8
-rw-r--r--drivers/usb/class/cdc-acm.c10
-rw-r--r--drivers/usb/gadget/u_serial.c4
-rw-r--r--drivers/usb/serial/aircable.c8
-rw-r--r--drivers/usb/serial/ark3116.c8
-rw-r--r--drivers/usb/serial/belkin_sa.c8
-rw-r--r--drivers/usb/serial/cyberjack.c9
-rw-r--r--drivers/usb/serial/cypress_m8.c4
-rw-r--r--drivers/usb/serial/digi_acceleport.c8
-rw-r--r--drivers/usb/serial/f81232.c8
-rw-r--r--drivers/usb/serial/ftdi_sio.c8
-rw-r--r--drivers/usb/serial/garmin_gps.c7
-rw-r--r--drivers/usb/serial/generic.c8
-rw-r--r--drivers/usb/serial/io_edgeport.c35
-rw-r--r--drivers/usb/serial/io_ti.c27
-rw-r--r--drivers/usb/serial/ir-usb.c7
-rw-r--r--drivers/usb/serial/iuu_phoenix.c7
-rw-r--r--drivers/usb/serial/keyspan.c31
-rw-r--r--drivers/usb/serial/keyspan_pda.c7
-rw-r--r--drivers/usb/serial/kl5kusb105.c8
-rw-r--r--drivers/usb/serial/kobil_sct.c7
-rw-r--r--drivers/usb/serial/mct_u232.c11
-rw-r--r--drivers/usb/serial/metro-usb.c7
-rw-r--r--drivers/usb/serial/mos7720.c7
-rw-r--r--drivers/usb/serial/mos7840.c9
-rw-r--r--drivers/usb/serial/navman.c7
-rw-r--r--drivers/usb/serial/omninet.c11
-rw-r--r--drivers/usb/serial/opticon.c9
-rw-r--r--drivers/usb/serial/oti6858.c7
-rw-r--r--drivers/usb/serial/pl2303.c8
-rw-r--r--drivers/usb/serial/quatech2.c19
-rw-r--r--drivers/usb/serial/safe_serial.c13
-rw-r--r--drivers/usb/serial/sierra.c17
-rw-r--r--drivers/usb/serial/spcp8x5.c18
-rw-r--r--drivers/usb/serial/ssu100.c23
-rw-r--r--drivers/usb/serial/symbolserial.c10
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c39
-rw-r--r--drivers/usb/serial/usb_wwan.c17
-rw-r--r--include/linux/tty.h1
-rw-r--r--include/linux/tty_flip.h1
-rw-r--r--net/bluetooth/rfcomm/tty.c16
-rw-r--r--net/irda/ircomm/ircomm_tty.c4
146 files changed, 446 insertions, 988 deletions
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index 942022a5bc86..da2f319fb71d 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -53,9 +53,8 @@ struct tty_driver *hp_simserial_driver;
static struct console *console;
-static void receive_chars(struct tty_struct *tty)
+static void receive_chars(struct tty_port *port)
{
- struct tty_port *port = tty->port;
unsigned char ch;
static unsigned char seen_esc = 0;
@@ -85,7 +84,7 @@ static void receive_chars(struct tty_struct *tty)
if (tty_insert_flip_char(port, ch, TTY_NORMAL) == 0)
break;
}
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(port);
}
/*
@@ -94,18 +93,9 @@ static void receive_chars(struct tty_struct *tty)
static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
{
struct serial_state *info = dev_id;
- struct tty_struct *tty = tty_port_tty_get(&info->port);
- if (!tty) {
- printk(KERN_INFO "%s: tty=0 problem\n", __func__);
- return IRQ_NONE;
- }
- /*
- * pretty simple in our case, because we only get interrupts
- * on inbound traffic
- */
- receive_chars(tty);
- tty_kref_put(tty);
+ receive_chars(&info->port);
+
return IRQ_HANDLED;
}
diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
index ae61bd692b4b..1dd20dbfd098 100644
--- a/arch/mn10300/kernel/mn10300-serial.c
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -525,7 +525,6 @@ static void mn10300_serial_receive_interrupt(struct mn10300_serial_port *port)
{
struct uart_icount *icount = &port->uart.icount;
struct tty_port *port = &port->uart.state->port;
- struct tty_struct *tty = port->tty;
unsigned ix;
int count;
u8 st, ch, push, status, overrun;
@@ -538,7 +537,7 @@ static void mn10300_serial_receive_interrupt(struct mn10300_serial_port *port)
count = tty_buffer_request_room(port, count);
if (count == 0) {
if (!port->low_latency)
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(port);
return;
}
@@ -547,7 +546,7 @@ try_again:
ix = ACCESS_ONCE(port->rx_outp);
if (CIRC_CNT(port->rx_inp, ix, MNSC_BUFFER_SIZE) == 0) {
if (push && !port->low_latency)
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(port);
return;
}
@@ -679,7 +678,7 @@ insert:
count--;
if (count <= 0) {
if (!port->low_latency)
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(port);
return;
}
diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c
index 4d92a379eb21..d5cae55195ec 100644
--- a/arch/parisc/kernel/pdc_cons.c
+++ b/arch/parisc/kernel/pdc_cons.c
@@ -138,10 +138,6 @@ static const struct tty_operations pdc_console_tty_ops = {
static void pdc_console_poll(unsigned long unused)
{
int data, count = 0;
- struct tty_struct *tty = tty_port_tty_get(&tty_port);
-
- if (!tty)
- return;
while (1) {
data = pdc_console_poll_key(NULL);
@@ -152,9 +148,7 @@ static void pdc_console_poll(unsigned long unused)
}
if (count)
- tty_flip_buffer_push(tty);
-
- tty_kref_put(tty);
+ tty_flip_buffer_push(&tty_port);
if (pdc_cons.flags & CON_ENABLED)
mod_timer(&pdc_console_timer, jiffies + PDC_CONS_POLL_DELAY);
diff --git a/arch/um/drivers/chan.h b/arch/um/drivers/chan.h
index 02b5a76e98d9..78f1b8999964 100644
--- a/arch/um/drivers/chan.h
+++ b/arch/um/drivers/chan.h
@@ -27,8 +27,7 @@ struct chan {
void *data;
};
-extern void chan_interrupt(struct line *line,
- struct tty_struct *tty, int irq);
+extern void chan_interrupt(struct line *line, int irq);
extern int parse_chan_pair(char *str, struct line *line, int device,
const struct chan_opts *opts, char **error_out);
extern int write_chan(struct chan *chan, const char *buf, int len,
diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c
index 795bd8102205..15c553c239a1 100644
--- a/arch/um/drivers/chan_kern.c
+++ b/arch/um/drivers/chan_kern.c
@@ -131,11 +131,9 @@ void chan_enable_winch(struct chan *chan, struct tty_struct *tty)
static void line_timer_cb(struct work_struct *work)
{
struct line *line = container_of(work, struct line, task.work);
- struct tty_struct *tty = tty_port_tty_get(&line->port);
if (!line->throttled)
- chan_interrupt(line, tty, line->driver->read_irq);
- tty_kref_put(tty);
+ chan_interrupt(line, line->driver->read_irq);
}
int enable_chan(struct line *line)
@@ -546,7 +544,7 @@ int parse_chan_pair(char *str, struct line *line, int device,
return 0;
}
-void chan_interrupt(struct line *line, struct tty_struct *tty, int irq)
+void chan_interrupt(struct line *line, int irq)
{
struct tty_port *port = &line->port;
struct chan *chan = line->chan_in;
@@ -570,8 +568,11 @@ void chan_interrupt(struct line *line, struct tty_struct *tty, int irq)
reactivate_fd(chan->fd, irq);
if (err == -EIO) {
if (chan->primary) {
- if (tty != NULL)
+ struct tty_struct *tty = tty_port_tty_get(&line->port);
+ if (tty != NULL) {
tty_hangup(tty);
+ tty_kref_put(tty);
+ }
if (line->chan_out != chan)
close_one_chan(line->chan_out, 1);
}
@@ -580,6 +581,5 @@ void chan_interrupt(struct line *line, struct tty_struct *tty, int irq)
return;
}
out:
- if (tty)
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(port);
}
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 9ffc28bd4b7a..f1b38571f94e 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -19,11 +19,10 @@ static irqreturn_t line_interrupt(int irq, void *data)
{
struct chan *chan = data;
struct line *line = chan->line;
- struct tty_struct *tty = tty_port_tty_get(&line->port);
if (line)
- chan_interrupt(line, tty, irq);
- tty_kref_put(tty);
+ chan_interrupt(line, irq);
+
return IRQ_HANDLED;
}
@@ -234,7 +233,7 @@ void line_unthrottle(struct tty_struct *tty)
struct line *line = tty->driver_data;
line->throttled = 0;
- chan_interrupt(line, tty, line->driver->read_irq);
+ chan_interrupt(line, line->driver->read_irq);
/*
* Maybe there is enough stuff pending that calling the interrupt
diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c
index 62447d63890c..da9866f7fecf 100644
--- a/arch/xtensa/platforms/iss/console.c
+++ b/arch/xtensa/platforms/iss/console.c
@@ -58,7 +58,8 @@ static int rs_open(struct tty_struct *tty, struct file * filp)
tty->port = &serial_port;
spin_lock(&timer_lock);
if (tty->count == 1) {
- setup_timer(&serial_timer, rs_poll, (unsigned long)tty);
+ setup_timer(&serial_timer, rs_poll,
+ (unsigned long)&serial_port);
mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE);
}
spin_unlock(&timer_lock);
@@ -97,9 +98,7 @@ static int rs_write(struct tty_struct * tty,
static void rs_poll(unsigned long priv)
{
- struct tty_struct* tty = (struct tty_struct*) priv;
- struct tty_port *port = tty->port;
-
+ struct tty_port *port = (struct tty_port *)priv;
struct timeval tv = { .tv_sec = 0, .tv_usec = 0 };
int i = 0;
unsigned char c;
@@ -113,7 +112,7 @@ static void rs_poll(unsigned long priv)
}
if (i)
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(port);
mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE);
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 92dc7327c7aa..f334aec65fc7 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -886,7 +886,7 @@ static void rx_ready_hdlc(MGSLPC_INFO *info, int eom)
issue_command(info, CHA, CMD_RXFIFO);
}
-static void rx_ready_async(MGSLPC_INFO *info, int tcd, struct tty_struct *tty)
+static void rx_ready_async(MGSLPC_INFO *info, int tcd)
{
struct tty_port *port = &info->port;
unsigned char data, status, flag;
@@ -894,14 +894,6 @@ static void rx_ready_async(MGSLPC_INFO *info, int tcd, struct tty_struct *tty)
int work = 0;
struct mgsl_icount *icount = &info->icount;
- if (!tty) {
- /* tty is not available anymore */
- issue_command(info, CHA, CMD_RXRESET);
- if (debug_level >= DEBUG_LEVEL_ISR)
- printk("%s(%d):rx_ready_async(tty=NULL)\n",__FILE__,__LINE__);
- return;
- }
-
if (tcd) {
/* early termination, get FIFO count from RBCL register */
fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f);
@@ -958,7 +950,7 @@ static void rx_ready_async(MGSLPC_INFO *info, int tcd, struct tty_struct *tty)
}
if (work)
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(port);
}
@@ -1218,7 +1210,7 @@ static irqreturn_t mgslpc_isr(int dummy, void *dev_id)
if (info->params.mode == MGSL_MODE_HDLC)
rx_ready_hdlc(info, isr & IRQ_RXEOM);
else
- rx_ready_async(info, isr & IRQ_RXEOM, tty);
+ rx_ready_async(info, isr & IRQ_RXEOM);
}
/* transmit IRQs */
diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c
index 8e0ed663ba9b..ab20a0851dd2 100644
--- a/drivers/ipack/devices/ipoctal.c
+++ b/drivers/ipack/devices/ipoctal.c
@@ -133,8 +133,7 @@ static int ipoctal_get_icount(struct tty_struct *tty,
return 0;
}
-static void ipoctal_irq_rx(struct ipoctal_channel *channel,
- struct tty_struct *tty, u8 sr)
+static void ipoctal_irq_rx(struct ipoctal_channel *channel, u8 sr)
{
struct tty_port *port = &channel->tty_port;
unsigned char value;
@@ -176,7 +175,7 @@ static void ipoctal_irq_rx(struct ipoctal_channel *channel,
sr = ioread8(&channel->regs->r.sr);
} while (isr & channel->isr_rx_rdy_mask);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(port);
}
static void ipoctal_irq_tx(struct ipoctal_channel *channel)
@@ -209,15 +208,11 @@ static void ipoctal_irq_tx(struct ipoctal_channel *channel)
static void ipoctal_irq_channel(struct ipoctal_channel *channel)
{
u8 isr, sr;
- struct tty_struct *tty;
/* If there is no client, skip the check */
if (!atomic_read(&channel->open))
return;
- tty = tty_port_tty_get(&channel->tty_port);
- if (!tty)
- return;
/* The HW is organized in pair of channels. See which register we need
* to read from */
isr = ioread8(&channel->block_regs->r.isr);
@@ -236,14 +231,13 @@ static void ipoctal_irq_channel(struct ipoctal_channel *channel)
/* RX data */
if ((isr & channel->isr_rx_rdy_mask) && (sr & SR_RX_READY))
- ipoctal_irq_rx(channel, tty, sr);
+ ipoctal_irq_rx(channel, sr);
/* TX of each character */
if ((isr & channel->isr_tx_rdy_mask) && (sr & SR_TX_READY))
ipoctal_irq_tx(channel);
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
+ tty_flip_buffer_push(&channel->tty_port);
}
static irqreturn_t ipoctal_irq_handler(void *arg)
diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c
index 6dcecd40a819..0fbf4f215d86 100644
--- a/drivers/isdn/gigaset/interface.c
+++ b/drivers/isdn/gigaset/interface.c
@@ -562,16 +562,8 @@ void gigaset_if_free(struct cardstate *cs)
void gigaset_if_receive(struct cardstate *cs,
unsigned char *buffer, size_t len)
{
- struct tty_struct *tty = tty_port_tty_get(&cs->port);
-
- if (tty == NULL) {
- gig_dbg(DEBUG_IF, "receive on closed device");
- return;
- }
-
tty_insert_flip_string(&cs->port, buffer, len);
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
+ tty_flip_buffer_push(&cs->port);
}
EXPORT_SYMBOL_GPL(gigaset_if_receive);
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index 9bb9986659e4..d8a7d8323414 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -63,16 +63,11 @@ isdn_tty_try_read(modem_info *info, struct sk_buff *skb)
struct tty_port *port = &info->port;
int c;
int len;
- struct tty_struct *tty;
char last;
if (!info->online)
return 0;
- tty = port->tty;
- if (!tty)
- return 0;
-
if (!(info->mcr & UART_MCR_RTS))
return 0;
@@ -110,7 +105,7 @@ isdn_tty_try_read(modem_info *info, struct sk_buff *skb)
tty_insert_flip_char(port, last, 0xFF);
else
tty_insert_flip_char(port, last, TTY_NORMAL);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(port);
kfree_skb(skb);
return 1;
@@ -127,7 +122,6 @@ isdn_tty_readmodem(void)
int midx;
int i;
int r;
- struct tty_struct *tty;
modem_info *info;
for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
@@ -145,20 +139,21 @@ isdn_tty_readmodem(void)
if ((info->vonline & 1) && (info->emu.vpar[1]))
isdn_audio_eval_silence(info);
#endif
- tty = info->port.tty;
- if (tty) {
- if (info->mcr & UART_MCR_RTS) {
- /* CISCO AsyncPPP Hack */
- if (!(info->emu.mdmreg[REG_CPPP] & BIT_CPPP))
- r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, &info->port, 0);
- else
- r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, &info->port, 1);
- if (r)
- tty_flip_buffer_push(tty);
- } else
- r = 1;
+ if (info->mcr & UART_MCR_RTS) {
+ /* CISCO AsyncPPP Hack */
+ if (!(info->emu.mdmreg[REG_CPPP] & BIT_CPPP))
+ r = isdn_readbchan_tty(info->isdn_driver,
+ info->isdn_channel,
+ &info->port, 0);
+ else
+ r = isdn_readbchan_tty(info->isdn_driver,
+ info->isdn_channel,
+ &info->port, 1);
+ if (r)
+ tty_flip_buffer_push(&info->port);
} else
r = 1;
+
if (r) {
info->rcvsched = 0;
resched = 1;
@@ -2230,7 +2225,6 @@ isdn_tty_stat_callback(int i, isdn_ctrl *c)
void
isdn_tty_at_cout(char *msg, modem_info *info)
{
- struct tty_struct *tty;
struct tty_port *port = &info->port;
atemu *m = &info->emu;
char *p;
@@ -2248,8 +2242,7 @@ isdn_tty_at_cout(char *msg, modem_info *info)
l = strlen(msg);
spin_lock_irqsave(&info->readlock, flags);
- tty = port->tty;
- if ((port->flags & ASYNC_CLOSING) || (!tty)) {
+ if (port->flags & ASYNC_CLOSING) {
spin_unlock_irqrestore(&info->readlock, flags);
return;
}
@@ -2301,7 +2294,7 @@ isdn_tty_at_cout(char *msg, modem_info *info)
} else {
spin_unlock_irqrestore(&info->readlock, flags);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(port);
}
}
diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c
index 894078be0b96..c931dfe6a59c 100644
--- a/drivers/mmc/card/sdio_uart.c
+++ b/drivers/mmc/card/sdio_uart.c
@@ -381,7 +381,6 @@ static void sdio_uart_stop_rx(struct sdio_uart_port *port)
static void sdio_uart_receive_chars(struct sdio_uart_port *port,
unsigned int *status)
{
- struct tty_struct *tty = tty_port_tty_get(&port->port);
unsigned int ch, flag;
int max_count = 256;
@@ -418,24 +417,19 @@ static void sdio_uart_receive_chars(struct sdio_uart_port *port,
}
if ((*status & port->ignore_status_mask & ~UART_LSR_OE) == 0)
- if (tty)
- tty_insert_flip_char(&port->port, ch, flag);
+ tty_insert_flip_char(&port->port, ch, flag);
/*
* Overrun is special. Since it's reported immediately,
* it doesn't affect the current character.
*/
if (*status & ~port->ignore_status_mask & UART_LSR_OE)
- if (tty)
- tty_insert_flip_char(&port->port, 0,
- TTY_OVERRUN);
+ tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
*status = sdio_in(port, UART_LSR);
} while ((*status & UART_LSR_DR) && (max_count-- > 0));
- if (tty) {
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
- }
+
+ tty_flip_buffer_push(&port->port);
}
static void sdio_uart_transmit_chars(struct sdio_uart_port *port)
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index d235ca07548f..f902a14da88c 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2035,24 +2035,23 @@ static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial)
tty = tty_port_tty_get(&serial->port);
/* Push data to tty */
- if (tty) {
- write_length_remaining = urb->actual_length -
- serial->curr_rx_urb_offset;
- D1("data to push to tty");
- while (write_length_remaining) {
- if (test_bit(TTY_THROTTLED, &tty->flags)) {
- tty_kref_put(tty);
- return -1;
- }
- curr_write_len = tty_insert_flip_string(&serial->port,
- urb->transfer_buffer + serial->curr_rx_urb_offset,
- write_length_remaining);
- serial->curr_rx_urb_offset += curr_write_len;
- write_length_remaining -= curr_write_len;
- tty_flip_buffer_push(tty);
+ write_length_remaining = urb->actual_length -
+ serial->curr_rx_urb_offset;
+ D1("data to push to tty");
+ while (write_length_remaining) {
+ if (tty && test_bit(TTY_THROTTLED, &tty->flags)) {
+ tty_kref_put(tty);
+ return -1;
}
- tty_kref_put(tty);
+ curr_write_len = tty_insert_flip_string(&serial->port,
+ urb->transfer_buffer + serial->curr_rx_urb_offset,
+ write_length_remaining);
+ serial->curr_rx_urb_offset += curr_write_len;
+ write_length_remaining -= curr_write_len;
+ tty_flip_buffer_push(&serial->port);
}
+ tty_kref_put(tty);
+
if (write_length_remaining == 0) {
serial->curr_rx_urb_offset = 0;
serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0;
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 41b75c5ae0d5..2f58e9fde156 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -413,7 +413,7 @@ static void raw3215_irq(struct ccw_device *cdev, unsigned long intparm,
case CTRLCHAR_CTRL:
tty_insert_flip_char(&raw->port, cchar,
TTY_NORMAL);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&raw->port);
break;
case CTRLCHAR_NONE:
@@ -427,7 +427,7 @@ static void raw3215_irq(struct ccw_device *cdev, unsigned long intparm,
count -= 2;
tty_insert_flip_string(&raw->port, raw->inbuf,
count);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&raw->port);
break;
}
} else if (req->type == RAW3215_WRITE) {
diff --git a/drivers/s390/char/sclp_tty.c b/drivers/s390/char/sclp_tty.c
index 19b7c516c07d..14b4cb8abcc8 100644
--- a/drivers/s390/char/sclp_tty.c
+++ b/drivers/s390/char/sclp_tty.c
@@ -343,7 +343,7 @@ sclp_tty_input(unsigned char* buf, unsigned int count)
break;
case CTRLCHAR_CTRL:
tty_insert_flip_char(&sclp_port, cchar, TTY_NORMAL);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&sclp_port);
break;
case CTRLCHAR_NONE:
/* send (normal) input to line discipline */
@@ -355,7 +355,7 @@ sclp_tty_input(unsigned char* buf, unsigned int count)
tty_insert_flip_char(&sclp_port, '\n', TTY_NORMAL);
} else
tty_insert_flip_string(&sclp_port, buf, count - 2);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&sclp_port);
break;
}
tty_kref_put(tty);
diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c
index 0eca99b98712..6c92f62623be 100644
--- a/drivers/s390/char/sclp_vt220.c
+++ b/drivers/s390/char/sclp_vt220.c
@@ -461,14 +461,9 @@ sclp_vt220_write(struct tty_struct *tty, const unsigned char *buf, int count)
static void
sclp_vt220_receiver_fn(struct evbuf_header *evbuf)
{
- struct tty_struct *tty = tty_port_tty_get(&sclp_vt220_port);
char *buffer;
unsigned int count;
- /* Ignore input if device is not open */
- if (tty == NULL)
- return;
-
buffer = (char *) ((addr_t) evbuf + sizeof(struct evbuf_header));
count = evbuf->length - sizeof(struct evbuf_header);
@@ -481,10 +476,9 @@ sclp_vt220_receiver_fn(struct evbuf_header *evbuf)
buffer++;
count--;
tty_insert_flip_string(&sclp_vt220_port, buffer, count);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&sclp_vt220_port);
break;
}
- tty_kref_put(tty);
}
/*
diff --git a/drivers/staging/ccg/u_serial.c b/drivers/staging/ccg/u_serial.c
index 7df2c02d1137..b10947ae0ac5 100644
--- a/drivers/staging/ccg/u_serial.c
+++ b/drivers/staging/ccg/u_serial.c
@@ -491,12 +491,8 @@ static void gs_rx_push(unsigned long _port)
req = list_first_entry(queue, struct usb_request, list);
- /* discard data if tty was closed */
- if (!tty)
- goto recycle;
-
/* leave data queued if tty was rx throttled */
- if (test_bit(TTY_THROTTLED, &tty->flags))
+ if (tty && test_bit(TTY_THROTTLED, &tty->flags))
break;
switch (req->status) {
@@ -542,7 +538,6 @@ static void gs_rx_push(unsigned long _port)
}
port->n_read = 0;
}
-recycle:
list_move(&req->list, &port->read_pool);
port->read_started--;
}
@@ -550,8 +545,8 @@ recycle:
/* Push from tty to ldisc; without low_latency set this is handled by
* a workqueue, so we won't get callbacks and can hold port_lock
*/
- if (tty && do_push)
- tty_flip_buffer_push(tty);
+ if (do_push)
+ tty_flip_buffer_push(&port->port);
/* We want our data queue to become empty ASAP, keeping data
diff --git a/drivers/staging/dgrp/dgrp_net_ops.c b/drivers/staging/dgrp/dgrp_net_ops.c
index e618a667d84c..4c7abfabf197 100644
--- a/drivers/staging/dgrp/dgrp_net_ops.c
+++ b/drivers/staging/dgrp/dgrp_net_ops.c
@@ -234,7 +234,7 @@ static void dgrp_input(struct ch_struct *ch)
tty_insert_flip_string_flags(&ch->port, myflipbuf,
myflipflagbuf, len);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&ch->port);
ch->ch_rxcount += len;
}
@@ -2958,7 +2958,7 @@ check_query:
tty_buffer_request_room(&ch->port, 1);
tty_insert_flip_char(&ch->port, 0, TTY_BREAK);
- tty_flip_buffer_push(ch->ch_tun.un_tty);
+ tty_flip_buffer_push(&ch->port);
}
diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c
index a2a0c43dec1c..b403393c49c3 100644
--- a/drivers/staging/fwserial/fwserial.c
+++ b/drivers/staging/fwserial/fwserial.c
@@ -489,16 +489,11 @@ static void fwtty_do_hangup(struct work_struct *work)
static void fwtty_emit_breaks(struct work_struct *work)
{
struct fwtty_port *port = to_port(to_delayed_work(work), emit_breaks);
- struct tty_struct *tty;
static const char buf[16];
unsigned long now = jiffies;
unsigned long elapsed = now - port->break_last;
int n, t, c, brk = 0;
- tty = tty_port_tty_get(&port->port);
- if (!tty)
- return;
-
/* generate breaks at the line rate (but at least 1) */
n = (elapsed * port->cps) / HZ + 1;
port->break_last = now;
@@ -514,9 +509,7 @@ static void fwtty_emit_breaks(struct work_struct *work)
if (c < t)
break;
}
- tty_flip_buffer_push(tty);
-
- tty_kref_put(tty);
+ tty_flip_buffer_push(&port->port);
if (port->mstatus & (UART_LSR_BI << 24))
schedule_delayed_work(&port->emit_breaks, FREQ_BREAKS);
@@ -530,10 +523,6 @@ static void fwtty_pushrx(struct work_struct *work)
struct buffered_rx *buf, *next;
int n, c = 0;
- tty = tty_port_tty_get(&port->port);
- if (!tty)
- return;
-
spin_lock_bh(&port->lock);
list_for_each_entry_safe(buf, next, &port->buf_list, list) {
n = tty_insert_flip_string_fixed_flag(&port->port, buf->data,
@@ -545,7 +534,11 @@ static void fwtty_pushrx(struct work_struct *work)
memmove(buf->data, buf->data + n, buf->n - n);
buf->n -= n;
}
- __fwtty_throttle(port, tty);
+ tty = tty_port_tty_get(&port->port);
+ if (tty) {
+ __fwtty_throttle(port, tty);
+ tty_kref_put(tty);
+ }
break;
} else {
list_del(&buf->list);
@@ -553,13 +546,11 @@ static void fwtty_pushrx(struct work_struct *work)
}
}
if (c > 0)
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->port);
if (list_empty(&port->buf_list))
clear_bit(BUFFERING_RX, &port->flags);
spin_unlock_bh(&port->lock);
-
- tty_kref_put(tty);
}
static int fwtty_buffer_rx(struct fwtty_port *port, unsigned char *d, size_t n)
@@ -594,10 +585,6 @@ static int fwtty_rx(struct fwtty_port *port, unsigned char *data, size_t len)
unsigned lsr;
int err = 0;
- tty = tty_port_tty_get(&port->port);
- if (!tty)
- return -ENOENT;
-
fwtty_dbg(port, "%d", n);
profile_size_distrib(port->stats.reads, n);
@@ -634,16 +621,20 @@ static int fwtty_rx(struct fwtty_port *port, unsigned char *data, size_t len)
c = tty_insert_flip_string_fixed_flag(&port->port, data,
TTY_NORMAL, n);
if (c > 0)
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->port);
n -= c;
if (n) {
/* start buffering and throttling */
n -= fwtty_buffer_rx(port, &data[c], n);
- spin_lock_bh(&port->lock);
- __fwtty_throttle(port, tty);
- spin_unlock_bh(&port->lock);
+ tty = tty_port_tty_get(&port->port);
+ if (tty) {
+ spin_lock_bh(&port->lock);
+ __fwtty_throttle(port, tty);
+ spin_unlock_bh(&port->lock);
+ tty_kref_put(tty);
+ }
}
} else
n -= fwtty_buffer_rx(port, data, n);
@@ -654,8 +645,6 @@ static int fwtty_rx(struct fwtty_port *port, unsigned char *data, size_t len)
}
out:
- tty_kref_put(tty);
-
port->icount.rx += len;
port->stats.lost += n;
return err;
diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c
index 14965662d09c..df29a3de29f2 100644
--- a/drivers/staging/serqt_usb2/serqt_usb2.c
+++ b/drivers/staging/serqt_usb2/serqt_usb2.c
@@ -290,8 +290,7 @@ static void qt_interrupt_callback(struct urb *urb)
/* FIXME */
}
-static void qt_status_change_check(struct tty_struct *tty,
- struct urb *urb,
+static void qt_status_change_check(struct urb *urb,
struct quatech_port *qt_port,
struct usb_serial_port *port)
{
@@ -348,7 +347,7 @@ static void qt_status_change_check(struct tty_struct *tty,
tty_insert_flip_char(&port->port, data[i], TTY_NORMAL);
}
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->port);
}
static void qt_read_bulk_callback(struct urb *urb)
@@ -411,7 +410,7 @@ static void qt_read_bulk_callback(struct urb *urb)
}
if (urb->actual_length)
- qt_status_change_check(tty, urb, qt_port, port);
+ qt_status_change_check(urb, qt_port, port);
/* Continue trying to always read */
usb_fill_bulk_urb(port->read_urb, serial->dev,
@@ -427,7 +426,7 @@ static void qt_read_bulk_callback(struct urb *urb)
__func__, result);
else {
if (urb->actual_length) {
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->port);
tty_schedule_flip(tty);
}
}
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 2d1357acbc23..4c7d70172193 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -251,7 +251,6 @@ static void receive_chars(struct serial_state *info)
{
int status;
int serdatr;
- struct tty_struct *tty = info->tport.tty;
unsigned char ch, flag;
struct async_icount *icount;
int oe = 0;
@@ -314,7 +313,7 @@ static void receive_chars(struct serial_state *info)
#endif
flag = TTY_BREAK;
if (info->tport.flags & ASYNC_SAK)
- do_SAK(tty);
+ do_SAK(info->tport.tty);
} else if (status & UART_LSR_PE)
flag = TTY_PARITY;
else if (status & UART_LSR_FE)
@@ -331,7 +330,7 @@ static void receive_chars(struct serial_state *info)
tty_insert_flip_char(&info->tport, ch, flag);
if (oe == 1)
tty_insert_flip_char(&info->tport, 0, TTY_OVERRUN);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&info->tport);
out:
return;
}
diff --git a/drivers/tty/bfin_jtag_comm.c b/drivers/tty/bfin_jtag_comm.c
index 143c38579cb5..a93a424873fa 100644
--- a/drivers/tty/bfin_jtag_comm.c
+++ b/drivers/tty/bfin_jtag_comm.c
@@ -95,18 +95,16 @@ bfin_jc_emudat_manager(void *arg)
/* if incoming data is ready, eat it */
if (bfin_read_DBGSTAT() & EMUDIF) {
- if (tty != NULL) {
- uint32_t emudat = bfin_read_emudat();
- if (inbound_len == 0) {
- pr_debug("incoming length: 0x%08x\n", emudat);
- inbound_len = emudat;
- } else {
- size_t num_chars = (4 <= inbound_len ? 4 : inbound_len);
- pr_debug(" incoming data: 0x%08x (pushing %zu)\n", emudat, num_chars);
- inbound_len -= num_chars;
- tty_insert_flip_string(&port, (unsigned char *)&emudat, num_chars);
- tty_flip_buffer_push(tty);
- }
+ uint32_t emudat = bfin_read_emudat();
+ if (inbound_len == 0) {
+ pr_debug("incoming length: 0x%08x\n", emudat);
+ inbound_len = emudat;
+ } else {
+ size_t num_chars = (4 <= inbound_len ? 4 : inbound_len);
+ pr_debug(" incoming data: 0x%08x (pushing %zu)\n", emudat, num_chars);
+ inbound_len -= num_chars;
+ tty_insert_flip_string(&port, (unsigned char *)&emudat, num_chars);
+ tty_flip_buffer_push(&port);
}
}
diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c
index 5164f9a57017..ed92622b8949 100644
--- a/drivers/tty/ehv_bytechan.c
+++ b/drivers/tty/ehv_bytechan.c
@@ -371,16 +371,11 @@ console_initcall(ehv_bc_console_init);
static irqreturn_t ehv_bc_tty_rx_isr(int irq, void *data)
{
struct ehv_bc_data *bc = data;
- struct tty_struct *ttys = tty_port_tty_get(&bc->port);
unsigned int rx_count, tx_count, len;
int count;
char buffer[EV_BYTE_CHANNEL_MAX_BYTES];
int ret;
- /* ttys could be NULL during a hangup */
- if (!ttys)
- return IRQ_HANDLED;
-
/* Find out how much data needs to be read, and then ask the TTY layer
* if it can handle that much. We want to ensure that every byte we
* read from the byte channel will be accepted by the TTY layer.
@@ -422,9 +417,7 @@ static irqreturn_t ehv_bc_tty_rx_isr(int irq, void *data)
}
/* Tell the tty layer that we're done. */
- tty_flip_buffer_push(ttys);
-
- tty_kref_put(ttys);
+ tty_flip_buffer_push(&bc->port);
return IRQ_HANDLED;
}
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 8c2fe3a0e091..eb255e807c06 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -691,7 +691,7 @@ int hvc_poll(struct hvc_struct *hp)
a minimum for performance. */
timeout = MIN_TIMEOUT;
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&hp->port);
}
tty_kref_put(tty);
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 7bfc0a924b2f..1956593ee89d 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -623,7 +623,7 @@ static int hvcs_io(struct hvcs_struct *hvcsd)
spin_unlock_irqrestore(&hvcsd->lock, flags);
/* This is synch because tty->low_latency == 1 */
if(got)
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&hvcsd->port);
if (!got) {
/* Do this _after_ the flip_buffer_push */
diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
index 1f528b8ebf5f..dc591290120b 100644
--- a/drivers/tty/hvc/hvsi.c
+++ b/drivers/tty/hvc/hvsi.c
@@ -465,7 +465,7 @@ static int hvsi_load_chunk(struct hvsi_struct *hp, struct tty_struct *tty,
compact_inbuf(hp, packet);
if (flip)
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&hp->port);
return 1;
}
@@ -511,7 +511,7 @@ static irqreturn_t hvsi_interrupt(int irq, void *arg)
/* we weren't hung up and we weren't throttled, so we can
* deliver the rest now */
hvsi_send_overflow(hp);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&hp->port);
}
spin_unlock_irqrestore(&hp->lock, flags);
@@ -998,7 +998,7 @@ static void hvsi_unthrottle(struct tty_struct *tty)
spin_lock_irqsave(&hp->lock, flags);
if (hp->n_throttle) {
hvsi_send_overflow(hp);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&hp->port);
}
spin_unlock_irqrestore(&hp->lock, flags);
diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c
index c43da7445432..8fd72ff9436e 100644
--- a/drivers/tty/ipwireless/tty.c
+++ b/drivers/tty/ipwireless/tty.c
@@ -160,15 +160,9 @@ static void ipw_close(struct tty_struct *linux_tty, struct file *filp)
void ipwireless_tty_received(struct ipw_tty *tty, unsigned char *data,
unsigned int length)
{
- struct tty_struct *linux_tty;
int work = 0;
mutex_lock(&tty->ipw_tty_mutex);
- linux_tty = tty->port.tty;
- if (linux_tty == NULL) {
- mutex_unlock(&tty->ipw_tty_mutex);
- return;
- }
if (!tty->port.count) {
mutex_unlock(&tty->ipw_tty_mutex);
@@ -187,7 +181,7 @@ void ipwireless_tty_received(struct ipw_tty *tty, unsigned char *data,
* This may sleep if ->low_latency is set
*/
if (work)
- tty_flip_buffer_push(linux_tty);
+ tty_flip_buffer_push(&tty->port);
}
static void ipw_write_packet_sent_callback(void *callback_data,
diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c
index c70144f55fc0..858291ca889c 100644
--- a/drivers/tty/isicom.c
+++ b/drivers/tty/isicom.c
@@ -637,7 +637,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
tty_insert_flip_char(&port->port, 0, TTY_BREAK);
if (port->port.flags & ASYNC_SAK)
do_SAK(tty);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->port);
break;
case 2: /* Statistics */
@@ -671,7 +671,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
byte_count -= 2;
}
}
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->port);
}
outw(0x0000, base+0x04); /* enable interrupts */
spin_unlock(&card->card_lock);
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index e9cdfdfe06e9..ad34a202a34d 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -2145,7 +2145,7 @@ end_intr:
* recursive locking.
*/
spin_unlock(&port->slock);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->port);
spin_lock(&port->slock);
}
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 4a3342d21c8f..d84dcfeadce3 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1141,7 +1141,6 @@ static void gsm_control_modem(struct gsm_mux *gsm, u8 *data, int clen)
static void gsm_control_rls(struct gsm_mux *gsm, u8 *data, int clen)
{
struct tty_port *port;
- struct tty_struct *tty;
unsigned int addr = 0 ;
u8 bits;
int len = clen;
@@ -1174,12 +1173,8 @@ static void gsm_control_rls(struct gsm_mux *gsm, u8 *data, int clen)
if (bits & 8)
tty_insert_flip_char(port, 0, TTY_FRAME);
- /* See if we have an uplink tty */
- tty = tty_port_tty_get(port);
- if (tty) {
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
- }
+ tty_flip_buffer_push(port);
+
gsm_control_reply(gsm, CMD_RLS, data, clen);
}
@@ -1552,36 +1547,37 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int clen)
{
/* krefs .. */
struct tty_port *port = &dlci->port;
- struct tty_struct *tty = tty_port_tty_get(port);
+ struct tty_struct *tty;
unsigned int modem = 0;
int len = clen;
if (debug & 16)
- pr_debug("%d bytes for tty %p\n", len, tty);
- if (tty) {
- switch (dlci->adaption) {
- /* Unsupported types */
- /* Packetised interruptible data */
- case 4:
- break;
- /* Packetised uininterruptible voice/data */
- case 3:
- break;
- /* Asynchronous serial with line state in each frame */
- case 2:
- while (gsm_read_ea(&modem, *data++) == 0) {
- len--;
- if (len == 0)
- return;
- }
+ pr_debug("%d bytes for tty\n", len);
+ switch (dlci->adaption) {
+ /* Unsupported types */
+ /* Packetised interruptible data */
+ case 4:
+ break;
+ /* Packetised uininterruptible voice/data */
+ case 3:
+ break;
+ /* Asynchronous serial with line state in each frame */
+ case 2:
+ while (gsm_read_ea(&modem, *data++) == 0) {
+ len--;
+ if (len == 0)
+ return;
+ }
+ tty = tty_port_tty_get(port);
+ if (tty) {
gsm_process_modem(tty, dlci, modem, clen);
- /* Line state will go via DLCI 0 controls only */
- case 1:
- default:
- tty_insert_flip_string(port, data, len);
- tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
}
- tty_kref_put(tty);
+ /* Line state will go via DLCI 0 controls only */
+ case 1:
+ default:
+ tty_insert_flip_string(port, data, len);
+ tty_flip_buffer_push(port);
}
}
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index 941fe8060ea5..afdd7732d925 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -1272,15 +1272,11 @@ static irqreturn_t interrupt_handler(int irq, void *dev_id)
exit_handler:
spin_unlock(&dc->spin_mutex);
- for (a = 0; a < NOZOMI_MAX_PORTS; a++) {
- struct tty_struct *tty;
- if (test_and_clear_bit(a, &dc->flip)) {
- tty = tty_port_tty_get(&dc->port[a].port);
- if (tty)
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
- }
- }
+
+ for (a = 0; a < NOZOMI_MAX_PORTS; a++)
+ if (test_and_clear_bit(a, &dc->flip))
+ tty_flip_buffer_push(&dc->port[a].port);
+
return IRQ_HANDLED;
none:
spin_unlock(&dc->spin_mutex);
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 3c285d398f38..32d027c303aa 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -123,7 +123,7 @@ static int pty_write(struct tty_struct *tty, const unsigned char *buf, int c)
c = tty_insert_flip_string(to->port, buf, c);
/* And shovel */
if (c) {
- tty_flip_buffer_push(to);
+ tty_flip_buffer_push(to->port);
tty_wakeup(tty);
}
}
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index 5848a767001a..8073cc0dff59 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -315,9 +315,8 @@ static inline int rocket_paranoia_check(struct r_port *info,
* that receive data is present on a serial port. Pulls data from FIFO, moves it into the
* tty layer.
*/
-static void rp_do_receive(struct r_port *info,
- struct tty_struct *tty,
- CHANNEL_t * cp, unsigned int ChanStatus)
+static void rp_do_receive(struct r_port *info, CHANNEL_t *cp,
+ unsigned int ChanStatus)
{
unsigned int CharNStat;
int ToRecv, wRecv, space;
@@ -416,7 +415,7 @@ static void rp_do_receive(struct r_port *info,
cbuf[ToRecv - 1] = sInB(sGetTxRxDataIO(cp));
}
/* Push the data up to the tty layer */
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&info->port);
}
/*
@@ -495,7 +494,6 @@ static void rp_do_transmit(struct r_port *info)
static void rp_handle_port(struct r_port *info)
{
CHANNEL_t *cp;
- struct tty_struct *tty;
unsigned int IntMask, ChanStatus;
if (!info)
@@ -506,12 +504,7 @@ static void rp_handle_port(struct r_port *info)
"info->flags & NOT_INIT\n");
return;
}
- tty = tty_port_tty_get(&info->port);
- if (!tty) {
- printk(KERN_WARNING "rp: WARNING: rp_handle_port called with "
- "tty==NULL\n");
- return;
- }
+
cp = &info->channel;
IntMask = sGetChanIntID(cp) & info->intmask;
@@ -520,7 +513,7 @@ static void rp_handle_port(struct r_port *info)
#endif
ChanStatus = sGetChanStatus(cp);
if (IntMask & RXF_TRIG) { /* Rx FIFO trigger level */
- rp_do_receive(info, tty, cp, ChanStatus);
+ rp_do_receive(info, cp, ChanStatus);
}
if (IntMask & DELTA_CD) { /* CD change */
#if (defined(ROCKET_DEBUG_OPEN) || defined(ROCKET_DEBUG_INTR) || defined(ROCKET_DEBUG_HANGUP))
@@ -528,10 +521,15 @@ static void rp_handle_port(struct r_port *info)
(ChanStatus & CD_ACT) ? "on" : "off");
#endif
if (!(ChanStatus & CD_ACT) && info->cd_status) {
+ struct tty_struct *tty;
#ifdef ROCKET_DEBUG_HANGUP
printk(KERN_INFO "CD drop, calling hangup.\n");
#endif
- tty_hangup(tty);
+ tty = tty_port_tty_get(&info->port);
+ if (tty) {
+ tty_hangup(tty);
+ tty_kref_put(tty);
+ }
}
info->cd_status = (ChanStatus & CD_ACT) ? 1 : 0;
wake_up_interruptible(&info->port.open_wait);
@@ -544,7 +542,6 @@ static void rp_handle_port(struct r_port *info)
printk(KERN_INFO "DSR change...\n");
}
#endif
- tty_kref_put(tty);
}
/*
diff --git a/drivers/tty/serial/21285.c b/drivers/tty/serial/21285.c
index a44345a2dbb4..c7e8b60b6177 100644
--- a/drivers/tty/serial/21285.c
+++ b/drivers/tty/serial/21285.c
@@ -85,7 +85,6 @@ static void serial21285_enable_ms(struct uart_port *port)
static irqreturn_t serial21285_rx_chars(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
- struct tty_struct *tty = port->state->port.tty;
unsigned int status, ch, flag, rxs, max_count = 256;
status = *CSR_UARTFLG;
@@ -115,7 +114,7 @@ static irqreturn_t serial21285_rx_chars(int irq, void *dev_id)
status = *CSR_UARTFLG;
}
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->state->port);
return IRQ_HANDLED;
}
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index 5fb6577b94dc..0d771ec16750 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -1323,7 +1323,6 @@ unsigned char
serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr)
{
struct uart_port *port = &up->port;
- struct tty_struct *tty = port->state->port.tty;
unsigned char ch;
int max_count = 256;
char flag;
@@ -1388,7 +1387,7 @@ ignore_char:
lsr = serial_in(up, UART_LSR);
} while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0));
spin_unlock(&port->lock);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->state->port);
spin_lock(&port->lock);
return lsr;
}
diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c
index 872f14ae43d2..84b90fd48063 100644
--- a/drivers/tty/serial/altera_jtaguart.c
+++ b/drivers/tty/serial/altera_jtaguart.c
@@ -139,7 +139,7 @@ static void altera_jtaguart_rx_chars(struct altera_jtaguart *pp)
uart_insert_char(port, 0, 0, ch, flag);
}
- tty_flip_buffer_push(port->state->port.tty);
+ tty_flip_buffer_push(&port->state->port);
}
static void altera_jtaguart_tx_chars(struct altera_jtaguart *pp)
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 684a0808e1c7..e133c8814bb5 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -231,7 +231,7 @@ static void altera_uart_rx_chars(struct altera_uart *pp)
flag);
}
- tty_flip_buffer_push(port->state->port.tty);
+ tty_flip_buffer_push(&port->state->port);
}
static void altera_uart_tx_chars(struct altera_uart *pp)
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index 22317dd16474..c36840519527 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -116,7 +116,6 @@ static void pl010_enable_ms(struct uart_port *port)
static void pl010_rx_chars(struct uart_amba_port *uap)
{
- struct tty_struct *tty = uap->port.state->port.tty;
unsigned int status, ch, flag, rsr, max_count = 256;
status = readb(uap->port.membase + UART01x_FR);
@@ -165,7 +164,7 @@ static void pl010_rx_chars(struct uart_amba_port *uap)
status = readb(uap->port.membase + UART01x_FR);
}
spin_unlock(&uap->port.lock);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&uap->port.state->port);
spin_lock(&uap->port.lock);
}
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index e1257d17f5f0..3ea5408fcbeb 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -699,7 +699,6 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap,
bool readfifo)
{
struct tty_port *port = &uap->port.state->port;
- struct tty_struct *tty = port->tty;
struct pl011_sgbuf *sgbuf = use_buf_b ?
&uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a;
struct device *dev = uap->dmarx.chan->device->dev;
@@ -754,7 +753,7 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap,
dev_vdbg(uap->port.dev,
"Took %d chars from DMA buffer and %d chars from the FIFO\n",
dma_count, fifotaken);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(port);
spin_lock(&uap->port.lock);
}
@@ -1076,12 +1075,10 @@ static void pl011_enable_ms(struct uart_port *port)
static void pl011_rx_chars(struct uart_amba_port *uap)
{
- struct tty_struct *tty = uap->port.state->port.tty;
-
pl011_fifo_to_tty(uap);
spin_unlock(&uap->port.lock);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&uap->port.state->port);
/*
* If we were temporarily out of DMA mode for a while,
* attempt to switch back to DMA mode again.
diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c
index 59ae2b53e765..6331464d9101 100644
--- a/drivers/tty/serial/apbuart.c
+++ b/drivers/tty/serial/apbuart.c
@@ -78,7 +78,6 @@ static void apbuart_enable_ms(struct uart_port *port)
static void apbuart_rx_chars(struct uart_port *port)
{
- struct tty_struct *tty = port->state->port.tty;
unsigned int status, ch, rsr, flag;
unsigned int max_chars = port->fifosize;
@@ -126,7 +125,7 @@ static void apbuart_rx_chars(struct uart_port *port)
status = UART_GET_STATUS(port);
}
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->state->port);
}
static void apbuart_tx_chars(struct uart_port *port)
diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c
index 6ca5dd615f9e..27f20c57abed 100644
--- a/drivers/tty/serial/ar933x_uart.c
+++ b/drivers/tty/serial/ar933x_uart.c
@@ -298,10 +298,8 @@ static void ar933x_uart_set_termios(struct uart_port *port,
static void ar933x_uart_rx_chars(struct ar933x_uart_port *up)
{
struct tty_port *port = &up->port.state->port;
- struct tty_struct *tty;
int max_count = 256;
- tty = tty_port_tty_get(port);
do {
unsigned int rdata;
unsigned char ch;
@@ -324,10 +322,7 @@ static void ar933x_uart_rx_chars(struct ar933x_uart_port *up)
tty_insert_flip_char(port, ch, TTY_NORMAL);
} while (max_count-- > 0);
- if (tty) {
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
- }
+ tty_flip_buffer_push(port);
}
static void ar933x_uart_tx_chars(struct ar933x_uart_port *up)
diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c
index b46860104312..da734222e537 100644
--- a/drivers/tty/serial/arc_uart.c
+++ b/drivers/tty/serial/arc_uart.c
@@ -211,12 +211,8 @@ static void arc_serial_start_tx(struct uart_port *port)
static void arc_serial_rx_chars(struct arc_uart_port *uart)
{
- struct tty_struct *tty = tty_port_tty_get(&uart->port.state->port);
unsigned int status, ch, flg = 0;
- if (!tty)
- return;
-
/*
* UART has 4 deep RX-FIFO. Driver's recongnition of this fact
* is very subtle. Here's how ...
@@ -252,10 +248,8 @@ static void arc_serial_rx_chars(struct arc_uart_port *uart)
uart_insert_char(&uart->port, status, RXOERR, ch, flg);
done:
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&uart->port.state->port);
}
-
- tty_kref_put(tty);
}
/*
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 929567038c5a..d4a7c241b751 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -774,7 +774,7 @@ static void atmel_rx_from_ring(struct uart_port *port)
* uart_start(), which takes the lock.
*/
spin_unlock(&port->lock);
- tty_flip_buffer_push(port->state->port.tty);
+ tty_flip_buffer_push(&port->state->port);
spin_lock(&port->lock);
}
@@ -782,7 +782,6 @@ static void atmel_rx_from_dma(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
struct tty_port *tport = &port->state->port;
- struct tty_struct *tty = tport->tty;
struct atmel_dma_buffer *pdc;
int rx_idx = atmel_port->pdc_rx_idx;
unsigned int head;
@@ -850,7 +849,7 @@ static void atmel_rx_from_dma(struct uart_port *port)
* uart_start(), which takes the lock.
*/
spin_unlock(&port->lock);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(tport);
spin_lock(&port->lock);
UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index de30b1909728..719594e5fc21 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -236,14 +236,12 @@ static const char *bcm_uart_type(struct uart_port *port)
static void bcm_uart_do_rx(struct uart_port *port)
{
struct tty_port *port = &port->state->port;
- struct tty_struct *tty;
unsigned int max_count;
/* limit number of char read in interrupt, should not be
* higher than fifo size anyway since we're much faster than
* serial port */
max_count = 32;
- tty = port->tty;
do {
unsigned int iestat, c, cstat;
char flag;
@@ -305,7 +303,7 @@ static void bcm_uart_do_rx(struct uart_port *port)
} while (--max_count);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(port);
}
/*
diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c
index e4d3ac2e8992..487c173b0f72 100644
--- a/drivers/tty/serial/bfin_sport_uart.c
+++ b/drivers/tty/serial/bfin_sport_uart.c
@@ -150,7 +150,6 @@ static irqreturn_t sport_uart_rx_irq(int irq, void *dev_id)
{
struct sport_uart_port *up = dev_id;
struct tty_port *port = &up->port.state->port;
- struct tty_struct *tty = tport->tty;
unsigned int ch;
spin_lock(&up->port.lock);
@@ -162,7 +161,8 @@ static irqreturn_t sport_uart_rx_irq(int irq, void *dev_id)
if (!uart_handle_sysrq_char(&up->port, ch))
tty_insert_flip_char(port, ch, TTY_NORMAL);
}
- tty_flip_buffer_push(tty);
+ /* XXX this won't deadlock with lowlat? */
+ tty_flip_buffer_push(port);
spin_unlock(&up->port.lock);
diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c
index 2e2b2c1cb722..12dceda9db33 100644
--- a/drivers/tty/serial/bfin_uart.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -223,7 +223,6 @@ static void bfin_serial_enable_ms(struct uart_port *port)
#ifdef CONFIG_SERIAL_BFIN_PIO
static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
{
- struct tty_struct *tty = NULL;
unsigned int status, ch, flg;
static struct timeval anomaly_start = { .tv_sec = 0 };
@@ -242,11 +241,9 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
return;
}
- if (!uart->port.state || !uart->port.state->port.tty)
+ if (!uart->port.state)
return;
#endif
- tty = uart->port.state->port.tty;
-
if (ANOMALY_05000363) {
/* The BF533 (and BF561) family of processors have a nice anomaly
* where they continuously generate characters for a "single" break.
@@ -325,7 +322,7 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
uart_insert_char(&uart->port, status, OE, ch, flg);
ignore_char:
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&uart->port.state->port);
}
static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
@@ -426,7 +423,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
{
- struct tty_struct *tty = uart->port.state->port.tty;
int i, flg, status;
status = UART_GET_LSR(uart);
@@ -471,7 +467,7 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
}
dma_ignore_char:
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&uart->port.state->port);
}
void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index 3fd2526d121e..bfb17968c8db 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -85,12 +85,8 @@ static void uart_clps711x_enable_ms(struct uart_port *port)
static irqreturn_t uart_clps711x_int_rx(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
- struct tty_struct *tty = tty_port_tty_get(&port->state->port);
unsigned int status, ch, flg;
- if (!tty)
- return IRQ_HANDLED;
-
for (;;) {
status = clps_readl(SYSFLG(port));
if (status & SYSFLG_URXFE)
@@ -130,9 +126,7 @@ static irqreturn_t uart_clps711x_int_rx(int irq, void *dev_id)
uart_insert_char(port, status, UARTDR_OVERR, ch, flg);
}
- tty_flip_buffer_push(tty);
-
- tty_kref_put(tty);
+ tty_flip_buffer_push(&port->state->port);
return IRQ_HANDLED;
}
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index 0bb24378a3c0..97f4e1858649 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -246,7 +246,6 @@ static void cpm_uart_int_rx(struct uart_port *port)
unsigned char ch;
u8 *cp;
struct tty_port *tport = &port->state->port;
- struct tty_struct *tty = tport->tty;
struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
cbd_t __iomem *bdp;
u16 status;
@@ -323,7 +322,7 @@ static void cpm_uart_int_rx(struct uart_port *port)
pinfo->rx_cur = bdp;
/* activate BH processing */
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(tport);
return;
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 52449adc09ac..45acf103433e 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -2104,17 +2104,10 @@ static int force_eop_if_needed(struct e100_serial *info)
static void flush_to_flip_buffer(struct e100_serial *info)
{
- struct tty_struct *tty;
struct etrax_recv_buffer *buffer;
unsigned long flags;
local_irq_save(flags);
- tty = info->port.tty;
-
- if (!tty) {
- local_irq_restore(flags);
- return;
- }
while ((buffer = info->first_recv_buffer) != NULL) {
unsigned int count = buffer->length;
@@ -2138,7 +2131,7 @@ static void flush_to_flip_buffer(struct e100_serial *info)
local_irq_restore(flags);
/* This includes a check for low-latency */
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&info->port);
}
static void check_flush_timeout(struct e100_serial *info)
@@ -2274,12 +2267,6 @@ static
struct e100_serial * handle_ser_rx_interrupt_no_dma(struct e100_serial *info)
{
unsigned long data_read;
- struct tty_struct *tty = info->port.tty;
-
- if (!tty) {
- printk("!NO TTY!\n");
- return info;
- }
/* Read data and status at the same time */
data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]);
@@ -2382,7 +2369,7 @@ more_data:
goto more_data;
}
- tty_flip_buffer_push(info->port.tty);
+ tty_flip_buffer_push(&info->port);
return info;
}
diff --git a/drivers/tty/serial/dz.c b/drivers/tty/serial/dz.c
index 6491b8644a7f..2f2b2e538a54 100644
--- a/drivers/tty/serial/dz.c
+++ b/drivers/tty/serial/dz.c
@@ -187,7 +187,6 @@ static inline void dz_receive_chars(struct dz_mux *mux)
{
struct uart_port *uport;
struct dz_port *dport = &mux->dport[0];
- struct tty_struct *tty = NULL;
struct uart_icount *icount;
int lines_rx[DZ_NB_PORT] = { [0 ... DZ_NB_PORT - 1] = 0 };
unsigned char ch, flag;
@@ -197,7 +196,6 @@ static inline void dz_receive_chars(struct dz_mux *mux)
while ((status = dz_in(dport, DZ_RBUF)) & DZ_DVAL) {
dport = &mux->dport[LINE(status)];
uport = &dport->port;
- tty = uport->state->port.tty; /* point to the proper dev */
ch = UCHAR(status); /* grab the char */
flag = TTY_NORMAL;
@@ -249,7 +247,7 @@ static inline void dz_receive_chars(struct dz_mux *mux)
}
for (i = 0; i < DZ_NB_PORT; i++)
if (lines_rx[i])
- tty_flip_buffer_push(mux->dport[i].port.state->port.tty);
+ tty_flip_buffer_push(&mux->dport[i].port.state->port);
}
/*
diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c
index bdf67b0cb8b6..de14bd7dce10 100644
--- a/drivers/tty/serial/efm32-uart.c
+++ b/drivers/tty/serial/efm32-uart.c
@@ -249,12 +249,9 @@ static irqreturn_t efm32_uart_rxirq(int irq, void *data)
int handled = IRQ_NONE;
struct uart_port *port = &efm_port->port;
struct tty_port *tport = &port->state->port;
- struct tty_struct *tty;
spin_lock(&port->lock);
- tty = tty_kref_get(tport->tty);
-
if (irqflag & UARTn_IF_RXDATAV) {
efm32_uart_write32(efm_port, UARTn_IF_RXDATAV, UARTn_IFC);
efm32_uart_rx_chars(efm_port);
@@ -270,10 +267,7 @@ static irqreturn_t efm32_uart_rxirq(int irq, void *data)
handled = IRQ_HANDLED;
}
- if (tty) {
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
- }
+ tty_flip_buffer_push(tport);
spin_unlock(&port->lock);
diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c
index 54903ee5e5ab..bc9e6b017b05 100644
--- a/drivers/tty/serial/icom.c
+++ b/drivers/tty/serial/icom.c
@@ -735,7 +735,6 @@ static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port)
{
short int count, rcv_buff;
struct tty_port *port = &icom_port->uart_port.state->port;
- struct tty_struct *tty = port->tty;
unsigned short int status;
struct uart_icount *icount;
unsigned long offset;
@@ -835,7 +834,7 @@ ignore_char:
status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags);
}
icom_port->next_rcv = rcv_buff;
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(port);
}
static void process_interrupt(u16 port_int_reg,
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index 4bc6e47890b4..6a6668bbb330 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -669,12 +669,8 @@ static const struct tty_operations ifx_spi_serial_ops = {
static void ifx_spi_insert_flip_string(struct ifx_spi_device *ifx_dev,
unsigned char *chars, size_t size)
{
- struct tty_struct *tty = tty_port_tty_get(&ifx_dev->tty_port);
- if (!tty)
- return;
tty_insert_flip_string(&ifx_dev->tty_port, chars, size);
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
+ tty_flip_buffer_push(&ifx_dev->tty_port);
}
/**
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index f60c4028b6e1..be26345bf6a4 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -518,7 +518,6 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
unsigned int rx, flg, ignored = 0;
struct tty_struct *tty = sport->port.state->port.tty;
struct tty_port *port = &sport->port.state->port;
- struct tty_struct *tty = port->tty;
unsigned long flags, temp;
spin_lock_irqsave(&sport->port.lock, flags);
@@ -576,7 +575,7 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
out:
spin_unlock_irqrestore(&sport->port.lock, flags);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(port);
return IRQ_HANDLED;
}
diff --git a/drivers/tty/serial/ioc3_serial.c b/drivers/tty/serial/ioc3_serial.c
index edbdc4e45075..6e4c715c5d26 100644
--- a/drivers/tty/serial/ioc3_serial.c
+++ b/drivers/tty/serial/ioc3_serial.c
@@ -1393,7 +1393,6 @@ static inline int do_read(struct uart_port *the_port, char *buf, int len)
*/
static int receive_chars(struct uart_port *the_port)
{
- struct tty_struct *tty;
unsigned char ch[MAX_CHARS];
int read_count = 0, read_room, flip = 0;
struct uart_state *state = the_port->state;
@@ -1403,14 +1402,11 @@ static int receive_chars(struct uart_port *the_port)
/* Make sure all the pointers are "good" ones */
if (!state)
return 0;
- if (!state->port.tty)
- return 0;
if (!(port->ip_flags & INPUT_ENABLE))
return 0;
spin_lock_irqsave(&the_port->lock, pflags);
- tty = state->port.tty;
read_count = do_read(the_port, ch, MAX_CHARS);
if (read_count > 0) {
@@ -1422,7 +1418,7 @@ static int receive_chars(struct uart_port *the_port)
spin_unlock_irqrestore(&the_port->lock, pflags);
if (flip)
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&state->port);
return read_count;
}
diff --git a/drivers/tty/serial/ioc4_serial.c b/drivers/tty/serial/ioc4_serial.c
index 86f64ed89b45..e2520abcb1c4 100644
--- a/drivers/tty/serial/ioc4_serial.c
+++ b/drivers/tty/serial/ioc4_serial.c
@@ -2340,7 +2340,6 @@ static inline int do_read(struct uart_port *the_port, unsigned char *buf,
*/
static void receive_chars(struct uart_port *the_port)
{
- struct tty_struct *tty;
unsigned char ch[IOC4_MAX_CHARS];
int read_count, request_count = IOC4_MAX_CHARS;
struct uart_icount *icount;
@@ -2350,11 +2349,8 @@ static void receive_chars(struct uart_port *the_port)
/* Make sure all the pointers are "good" ones */
if (!state)
return;
- if (!state->port.tty)
- return;
spin_lock_irqsave(&the_port->lock, pflags);
- tty = state->port.tty;
request_count = tty_buffer_request_room(&state->port, IOC4_MAX_CHARS);
@@ -2369,7 +2365,7 @@ static void receive_chars(struct uart_port *the_port)
spin_unlock_irqrestore(&the_port->lock, pflags);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&state->port);
}
/**
diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c
index c9ce00dd1f8a..00f250ae14c5 100644
--- a/drivers/tty/serial/jsm/jsm_tty.c
+++ b/drivers/tty/serial/jsm/jsm_tty.c
@@ -654,7 +654,7 @@ void jsm_input(struct jsm_channel *ch)
spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
/* Tell the tty layer its okay to "eat" the data now */
- tty_flip_buffer_push(tp);
+ tty_flip_buffer_push(port);
jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, "finish\n");
}
diff --git a/drivers/tty/serial/kgdb_nmi.c b/drivers/tty/serial/kgdb_nmi.c
index ba2ef627d9c6..26a50b0c868b 100644
--- a/drivers/tty/serial/kgdb_nmi.c
+++ b/drivers/tty/serial/kgdb_nmi.c
@@ -202,7 +202,6 @@ bool kgdb_nmi_poll_knock(void)
static void kgdb_nmi_tty_receiver(unsigned long data)
{
struct kgdb_nmi_tty_priv *priv = (void *)data;
- struct tty_struct *tty;
char ch;
tasklet_schedule(&priv->tlet);
@@ -210,16 +209,9 @@ static void kgdb_nmi_tty_receiver(unsigned long data)
if (likely(!kgdb_nmi_tty_enabled || !kfifo_len(&priv->fifo)))
return;
- /* Port is there, but tty might be hung up, check. */
- tty = tty_port_tty_get(kgdb_nmi_port);
- if (!tty)
- return;
-
while (kfifo_out(&priv->fifo, &ch, 1))
tty_insert_flip_char(&priv->port, ch, TTY_NORMAL);
- tty_flip_buffer_push(priv->port.tty);
-
- tty_kref_put(tty);
+ tty_flip_buffer_push(&priv->port);
}
static int kgdb_nmi_tty_activate(struct tty_port *port, struct tty_struct *tty)
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index 1933fe3c98dd..15733da757c6 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -163,21 +163,15 @@ static int
lqasc_rx_chars(struct uart_port *port)
{
struct tty_port *tport = &port->state->port;
- struct tty_struct *tty = tty_port_tty_get(tport);
unsigned int ch = 0, rsr = 0, fifocnt;
- if (!tty) {
- dev_dbg(port->dev, "%s:tty is busy now", __func__);
- return -EBUSY;
- }
- fifocnt =
- ltq_r32(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_RXFFLMASK;
+ fifocnt = ltq_r32(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_RXFFLMASK;
while (fifocnt--) {
u8 flag = TTY_NORMAL;
ch = ltq_r8(port->membase + LTQ_ASC_RBUF);
rsr = (ltq_r32(port->membase + LTQ_ASC_STATE)
& ASCSTATE_ANY) | UART_DUMMY_UER_RX;
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(tport);
port->icount.rx++;
/*
@@ -219,9 +213,10 @@ lqasc_rx_chars(struct uart_port *port)
*/
tty_insert_flip_char(tport, 0, TTY_OVERRUN);
}
+
if (ch != 0)
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
+ tty_flip_buffer_push(tport);
+
return 0;
}
diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c
index 5cd180564c03..c8448e6f52e5 100644
--- a/drivers/tty/serial/lpc32xx_hs.c
+++ b/drivers/tty/serial/lpc32xx_hs.c
@@ -259,16 +259,6 @@ static void __serial_lpc32xx_rx(struct uart_port *port)
{
struct tty_port *tport = &port->state->port;
unsigned int tmp, flag;
- struct tty_struct *tty = tty_port_tty_get(tport);
-
- if (!tty) {
- /* Discard data: no tty available */
- while (!(readl(LPC32XX_HSUART_FIFO(port->membase)) &
- LPC32XX_HSU_RX_EMPTY))
- ;
-
- return;
- }
/* Read data from FIFO and push into terminal */
tmp = readl(LPC32XX_HSUART_FIFO(port->membase));
@@ -289,8 +279,7 @@ static void __serial_lpc32xx_rx(struct uart_port *port)
tmp = readl(LPC32XX_HSUART_FIFO(port->membase));
}
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
+ tty_flip_buffer_push(tport);
}
static void __serial_lpc32xx_tx(struct uart_port *port)
@@ -367,8 +356,7 @@ static irqreturn_t serial_lpc32xx_interrupt(int irq, void *dev_id)
/* Data received? */
if (status & (LPC32XX_HSU_RX_TIMEOUT_INT | LPC32XX_HSU_RX_TRIG_INT)) {
__serial_lpc32xx_rx(port);
- if (tty)
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(tport);
}
/* Transmit data request? */
diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c
index 2e9a390f2ac4..bb1afa0922e1 100644
--- a/drivers/tty/serial/m32r_sio.c
+++ b/drivers/tty/serial/m32r_sio.c
@@ -301,7 +301,6 @@ static void m32r_sio_enable_ms(struct uart_port *port)
static void receive_chars(struct uart_sio_port *up, int *status)
{
struct tty_port *port = &up->port.state->port;
- struct tty_struct *tty = tport->tty;
unsigned char ch;
unsigned char flag;
int max_count = 256;
@@ -369,7 +368,7 @@ static void receive_chars(struct uart_sio_port *up, int *status)
ignore_char:
*status = serial_in(up, UART_LSR);
} while ((*status & UART_LSR_DR) && (max_count-- > 0));
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(port);
}
static void transmit_chars(struct uart_sio_port *up)
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index e238e80cd981..791e1dfb8b11 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -311,8 +311,8 @@ static void max3100_work(struct work_struct *w)
}
}
- if (rxchars > 16 && s->port.state->port.tty != NULL) {
- tty_flip_buffer_push(s->port.state->port.tty);
+ if (rxchars > 16) {
+ tty_flip_buffer_push(&s->port.state->port);
rxchars = 0;
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -324,8 +324,8 @@ static void max3100_work(struct work_struct *w)
(!uart_circ_empty(xmit) &&
!uart_tx_stopped(&s->port))));
- if (rxchars > 0 && s->port.state->port.tty != NULL)
- tty_flip_buffer_push(s->port.state->port.tty);
+ if (rxchars > 0)
+ tty_flip_buffer_push(&s->port.state->port);
}
static irqreturn_t max3100_irq(int irqno, void *dev_id)
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index a801f6872cad..0c2422cb04ea 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -460,10 +460,6 @@ static int max310x_set_ref_clk(struct max310x_port *s)
static void max310x_handle_rx(struct max310x_port *s, unsigned int rxlen)
{
unsigned int sts = 0, ch = 0, flag;
- struct tty_struct *tty = tty_port_tty_get(&s->port.state->port);
-
- if (!tty)
- return;
if (unlikely(rxlen >= MAX310X_FIFO_SIZE)) {
dev_warn(s->port.dev, "Possible RX FIFO overrun %d\n", rxlen);
@@ -516,9 +512,7 @@ static void max310x_handle_rx(struct max310x_port *s, unsigned int rxlen)
ch, flag);
}
- tty_flip_buffer_push(tty);
-
- tty_kref_put(tty);
+ tty_flip_buffer_push(&s->port.state->port);
}
static void max310x_handle_tx(struct max310x_port *s)
diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c
index fcd56ab6053f..7ed99274572f 100644
--- a/drivers/tty/serial/mcf.c
+++ b/drivers/tty/serial/mcf.c
@@ -310,7 +310,7 @@ static void mcf_rx_chars(struct mcf_uart *pp)
uart_insert_char(port, status, MCFUART_USR_RXOVERRUN, ch, flag);
}
- tty_flip_buffer_push(port->state->port.tty);
+ tty_flip_buffer_push(&port->state->port);
}
/****************************************************************************/
diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c
index 60d585ab4870..5f4765a7a5c5 100644
--- a/drivers/tty/serial/mfd.c
+++ b/drivers/tty/serial/mfd.c
@@ -388,12 +388,8 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts)
struct hsu_dma_chan *chan = up->rxc;
struct uart_port *port = &up->port;
struct tty_port *tport = &port->state->port;
- struct tty_struct *tty = tport->tty;
int count;
- if (!tty)
- return;
-
/*
* First need to know how many is already transferred,
* then check if its a timeout DMA irq, and return
@@ -438,7 +434,7 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts)
| (0x1 << 16)
| (0x1 << 24) /* timeout bit, see HSU Errata 1 */
);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(tport);
chan_writel(chan, HSU_CH_CR, 0x3);
@@ -461,13 +457,9 @@ static void serial_hsu_stop_rx(struct uart_port *port)
static inline void receive_chars(struct uart_hsu_port *up, int *status)
{
- struct tty_struct *tty = up->port.state->port.tty;
unsigned int ch, flag;
unsigned int max_count = 256;
- if (!tty)
- return;
-
do {
ch = serial_in(up, UART_RX);
flag = TTY_NORMAL;
@@ -523,7 +515,7 @@ static inline void receive_chars(struct uart_hsu_port *up, int *status)
ignore_char:
*status = serial_in(up, UART_LSR);
} while ((*status & UART_LSR_DR) && max_count--);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&up->port.state->port);
}
static void transmit_chars(struct uart_hsu_port *up)
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index 0145aeb7721c..c0e1fad51be7 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -942,7 +942,6 @@ static inline int
mpc52xx_uart_int_rx_chars(struct uart_port *port)
{
struct tty_port *tport = &port->state->port;
- struct tty_struct *tty = tport->tty;
unsigned char ch, flag;
unsigned short status;
@@ -1000,7 +999,7 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
}
spin_unlock(&port->lock);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(tport);
spin_lock(&port->lock);
return psc_ops->raw_rx_rdy(port);
diff --git a/drivers/tty/serial/mpsc.c b/drivers/tty/serial/mpsc.c
index 6f2d2ceb326a..bc24f4931670 100644
--- a/drivers/tty/serial/mpsc.c
+++ b/drivers/tty/serial/mpsc.c
@@ -938,7 +938,6 @@ static int mpsc_rx_intr(struct mpsc_port_info *pi)
{
struct mpsc_rx_desc *rxre;
struct tty_port *port = &pi->port.state->port;
- struct tty_struct *tty = port->tty;
u32 cmdstat, bytes_in, i;
int rc = 0;
u8 *bp;
@@ -971,7 +970,7 @@ static int mpsc_rx_intr(struct mpsc_port_info *pi)
/* Following use of tty struct directly is deprecated */
if (tty_buffer_request_room(port, bytes_in) < bytes_in) {
if (port->low_latency)
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(port);
/*
* If this failed then we will throw away the bytes
* but must do so to clear interrupts.
@@ -1081,7 +1080,7 @@ next_frame:
if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0)
mpsc_start_rx(pi);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(port);
return rc;
}
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index 4632db7a24b7..f641c232beca 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -340,7 +340,6 @@ receive_chars(struct uart_max3110 *max, unsigned short *str, int len)
{
struct uart_port *port = &max->port;
struct tty_port *tport;
- struct tty_struct *tty;
char buf[M3110_RX_FIFO_DEPTH];
int r, w, usable;
@@ -349,9 +348,6 @@ receive_chars(struct uart_max3110 *max, unsigned short *str, int len)
return 0;
tport = &port->state->port;
- tty = tty_port_tty_get(tport);
- if (!tty)
- return 0;
for (r = 0, w = 0; r < len; r++) {
if (str[r] & MAX3110_BREAK &&
@@ -366,10 +362,8 @@ receive_chars(struct uart_max3110 *max, unsigned short *str, int len)
}
}
- if (!w) {
- tty_kref_put(tty);
+ if (!w)
return 0;
- }
for (r = 0; w; r += usable, w -= usable) {
usable = tty_buffer_request_room(tport, w);
@@ -378,8 +372,7 @@ receive_chars(struct uart_max3110 *max, unsigned short *str, int len)
port->icount.rx += usable;
}
}
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
+ tty_flip_buffer_push(tport);
return r;
}
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index cb787c0e279a..b11e99797fd8 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -92,7 +92,6 @@ static void msm_enable_ms(struct uart_port *port)
static void handle_rx_dm(struct uart_port *port, unsigned int misr)
{
struct tty_port *tport = &port->state->port;
- struct tty_struct *tty = tport->tty;
unsigned int sr;
int count = 0;
struct msm_port *msm_port = UART_TO_MSM(port);
@@ -138,7 +137,7 @@ static void handle_rx_dm(struct uart_port *port, unsigned int misr)
count -= 4;
}
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(tport);
if (misr & (UART_IMR_RXSTALE))
msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR);
msm_write(port, 0xFFFFFF, UARTDM_DMRX);
@@ -148,7 +147,6 @@ static void handle_rx_dm(struct uart_port *port, unsigned int misr)
static void handle_rx(struct uart_port *port)
{
struct tty_port *tport = &port->state->port;
- struct tty_struct *tty = tport->tty;
unsigned int sr;
/*
@@ -191,7 +189,7 @@ static void handle_rx(struct uart_port *port)
tty_insert_flip_char(tport, c, flag);
}
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(tport);
}
static void reset_dm_count(struct uart_port *port)
diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c
index c356ffff3c71..4a942c78347e 100644
--- a/drivers/tty/serial/msm_serial_hs.c
+++ b/drivers/tty/serial/msm_serial_hs.c
@@ -981,9 +981,8 @@ static void msm_hs_tty_flip_buffer_work(struct work_struct *work)
{
struct msm_hs_port *msm_uport =
container_of(work, struct msm_hs_port, rx.tty_work);
- struct tty_struct *tty = msm_uport->uport.state->port.tty;
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&msm_uport->uport.state->port);
}
/*
diff --git a/drivers/tty/serial/msm_smd_tty.c b/drivers/tty/serial/msm_smd_tty.c
index b43b4ec39269..e722ff163d91 100644
--- a/drivers/tty/serial/msm_smd_tty.c
+++ b/drivers/tty/serial/msm_smd_tty.c
@@ -80,7 +80,7 @@ static void smd_tty_notify(void *priv, unsigned event)
pr_err("OOPS - smd_tty_buffer mismatch?!");
}
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&info->port);
}
/* XXX only when writable and necessary */
diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c
index 83b21686020e..7fd6aaaacd8e 100644
--- a/drivers/tty/serial/mux.c
+++ b/drivers/tty/serial/mux.c
@@ -244,7 +244,6 @@ static void mux_read(struct uart_port *port)
{
struct tty_port *tport = &port->state->port;
int data;
- struct tty_struct *tty = tport->tty;
__u32 start_count = port->icount.rx;
while(1) {
@@ -270,9 +269,8 @@ static void mux_read(struct uart_port *port)
tty_insert_flip_char(tport, data & 0xFF, TTY_NORMAL);
}
- if (start_count != port->icount.rx) {
- tty_flip_buffer_push(tty);
- }
+ if (start_count != port->icount.rx)
+ tty_flip_buffer_push(tport);
}
/**
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 37a0046ef531..df0ba32f88ad 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -364,7 +364,6 @@ out:
static void mxs_auart_rx_chars(struct mxs_auart_port *s)
{
- struct tty_struct *tty = s->port.state->port.tty;
u32 stat = 0;
for (;;) {
@@ -375,7 +374,7 @@ static void mxs_auart_rx_chars(struct mxs_auart_port *s)
}
writel(stat, s->port.membase + AUART_STAT);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&s->port.state->port);
}
static int mxs_auart_request_port(struct uart_port *u)
@@ -458,7 +457,6 @@ static void dma_rx_callback(void *arg)
{
struct mxs_auart_port *s = (struct mxs_auart_port *) arg;
struct tty_port *port = &s->port.state->port;
- struct tty_struct *tty = port->tty;
int count;
u32 stat;
@@ -472,7 +470,7 @@ static void dma_rx_callback(void *arg)
tty_insert_flip_string(port, s->rx_dma_buf, count);
writel(stat, s->port.membase + AUART_STAT);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(port);
/* start the next DMA for RX. */
mxs_auart_dma_prep_rx(s);
diff --git a/drivers/tty/serial/netx-serial.c b/drivers/tty/serial/netx-serial.c
index d40da78e7c85..b9a40ed70be2 100644
--- a/drivers/tty/serial/netx-serial.c
+++ b/drivers/tty/serial/netx-serial.c
@@ -199,7 +199,6 @@ static void netx_txint(struct uart_port *port)
static void netx_rxint(struct uart_port *port)
{
unsigned char rx, flg, status;
- struct tty_struct *tty = port->state->port.tty;
while (!(readl(port->membase + UART_FR) & FR_RXFE)) {
rx = readl(port->membase + UART_DR);
@@ -237,8 +236,7 @@ static void netx_rxint(struct uart_port *port)
uart_insert_char(port, status, SR_OE, rx, flg);
}
- tty_flip_buffer_push(tty);
- return;
+ tty_flip_buffer_push(&port->state->port);
}
static irqreturn_t netx_int(int irq, void *dev_id)
diff --git a/drivers/tty/serial/nwpserial.c b/drivers/tty/serial/nwpserial.c
index 10d64a3697fb..77287c54f331 100644
--- a/drivers/tty/serial/nwpserial.c
+++ b/drivers/tty/serial/nwpserial.c
@@ -129,7 +129,6 @@ static irqreturn_t nwpserial_interrupt(int irq, void *dev_id)
{
struct nwpserial_port *up = dev_id;
struct tty_port *port = &up->port.state->port;
- struct tty_struct *tty = port->tty;
irqreturn_t ret;
unsigned int iir;
unsigned char ch;
@@ -150,7 +149,7 @@ static irqreturn_t nwpserial_interrupt(int irq, void *dev_id)
tty_insert_flip_char(port, ch, TTY_NORMAL);
} while (dcr_read(up->dcr_host, UART_LSR) & UART_LSR_DR);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(port);
ret = IRQ_HANDLED;
/* clear interrupt */
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index ec90651d661a..6f3dbf740f05 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -483,7 +483,6 @@ static void serial_omap_rdi(struct uart_omap_port *up, unsigned int lsr)
static irqreturn_t serial_omap_irq(int irq, void *dev_id)
{
struct uart_omap_port *up = dev_id;
- struct tty_struct *tty = up->port.state->port.tty;
unsigned int iir, lsr;
unsigned int type;
irqreturn_t ret = IRQ_NONE;
@@ -530,7 +529,7 @@ static irqreturn_t serial_omap_irq(int irq, void *dev_id)
spin_unlock(&up->port.lock);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&up->port.state->port);
pm_runtime_mark_last_busy(up->dev);
pm_runtime_put_autosuspend(up->dev);
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 967f1cb311f3..8b40a1fc9681 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -593,17 +593,9 @@ static int push_rx(struct eg20t_port *priv, const unsigned char *buf,
{
struct uart_port *port = &priv->port;
struct tty_port *tport = &port->state->port;
- struct tty_struct *tty;
-
- tty = tty_port_tty_get(tport);
- if (!tty) {
- dev_dbg(priv->port.dev, "%s:tty is busy now", __func__);
- return -EBUSY;
- }
tty_insert_flip_string(tport, buf, size);
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
+ tty_flip_buffer_push(tport);
return 0;
}
@@ -744,19 +736,12 @@ static void pch_dma_rx_complete(void *arg)
{
struct eg20t_port *priv = arg;
struct uart_port *port = &priv->port;
- struct tty_struct *tty = tty_port_tty_get(&port->state->port);
int count;
- if (!tty) {
- dev_dbg(priv->port.dev, "%s:tty is busy now", __func__);
- return;
- }
-
dma_sync_sg_for_cpu(port->dev, &priv->sg_rx, 1, DMA_FROM_DEVICE);
count = dma_push_rx(priv, priv->trigger_level);
if (count)
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
+ tty_flip_buffer_push(&port->state->port);
async_tx_ack(priv->desc_rx);
pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
PCH_UART_HAL_RX_ERR_INT);
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index 73a3f295e7c4..b1785f58b6e3 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -227,21 +227,19 @@ static void pmz_interrupt_control(struct uart_pmac_port *uap, int enable)
write_zsreg(uap, R1, uap->curregs[1]);
}
-static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
+static bool pmz_receive_chars(struct uart_pmac_port *uap)
{
struct tty_port *port;
- struct tty_struct *tty = NULL;
unsigned char ch, r1, drop, error, flag;
int loops = 0;
/* Sanity check, make sure the old bug is no longer happening */
- if (uap->port.state == NULL || uap->port.state->port.tty == NULL) {
+ if (uap->port.state == NULL) {
WARN_ON(1);
(void)read_zsdata(uap);
- return NULL;
+ return false;
}
port = &uap->port.state->port;
- tty = port->tty; /* TOCTOU above */
while (1) {
error = 0;
@@ -330,11 +328,11 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
break;
}
- return tty;
+ return true;
flood:
pmz_interrupt_control(uap, 0);
pmz_error("pmz: rx irq flood !\n");
- return tty;
+ return true;
}
static void pmz_status_handle(struct uart_pmac_port *uap)
@@ -455,7 +453,7 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
struct uart_pmac_port *uap_a;
struct uart_pmac_port *uap_b;
int rc = IRQ_NONE;
- struct tty_struct *tty;
+ bool push;
u8 r3;
uap_a = pmz_get_port_A(uap);
@@ -468,7 +466,7 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
pmz_debug("irq, r3: %x\n", r3);
#endif
/* Channel A */
- tty = NULL;
+ push = false;
if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
if (!ZS_IS_OPEN(uap_a)) {
pmz_debug("ChanA interrupt while not open !\n");
@@ -479,21 +477,21 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
if (r3 & CHAEXT)
pmz_status_handle(uap_a);
if (r3 & CHARxIP)
- tty = pmz_receive_chars(uap_a);
+ push = pmz_receive_chars(uap_a);
if (r3 & CHATxIP)
pmz_transmit_chars(uap_a);
rc = IRQ_HANDLED;
}
skip_a:
spin_unlock(&uap_a->port.lock);
- if (tty != NULL)
- tty_flip_buffer_push(tty);
+ if (push)
+ tty_flip_buffer_push(&uap->port.state->port);
if (!uap_b)
goto out;
spin_lock(&uap_b->port.lock);
- tty = NULL;
+ push = false;
if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
if (!ZS_IS_OPEN(uap_b)) {
pmz_debug("ChanB interrupt while not open !\n");
@@ -504,15 +502,15 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
if (r3 & CHBEXT)
pmz_status_handle(uap_b);
if (r3 & CHBRxIP)
- tty = pmz_receive_chars(uap_b);
+ push = pmz_receive_chars(uap_b);
if (r3 & CHBTxIP)
pmz_transmit_chars(uap_b);
rc = IRQ_HANDLED;
}
skip_b:
spin_unlock(&uap_b->port.lock);
- if (tty != NULL)
- tty_flip_buffer_push(tty);
+ if (push)
+ tty_flip_buffer_push(&uap->port.state->port);
out:
return rc;
diff --git a/drivers/tty/serial/pnx8xxx_uart.c b/drivers/tty/serial/pnx8xxx_uart.c
index 0aa75a97531c..7e277a5384a7 100644
--- a/drivers/tty/serial/pnx8xxx_uart.c
+++ b/drivers/tty/serial/pnx8xxx_uart.c
@@ -181,7 +181,6 @@ static void pnx8xxx_enable_ms(struct uart_port *port)
static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport)
{
- struct tty_struct *tty = sport->port.state->port.tty;
unsigned int status, ch, flg;
status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) |
@@ -238,7 +237,7 @@ static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport)
status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) |
ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT));
}
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&sport->port.state->port);
}
static void pnx8xxx_tx_chars(struct pnx8xxx_port *sport)
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index 2764828251f5..3b671bc3f966 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -98,7 +98,6 @@ static void serial_pxa_stop_rx(struct uart_port *port)
static inline void receive_chars(struct uart_pxa_port *up, int *status)
{
- struct tty_struct *tty = up->port.state->port.tty;
unsigned int ch, flag;
int max_count = 256;
@@ -168,7 +167,7 @@ static inline void receive_chars(struct uart_pxa_port *up, int *status)
ignore_char:
*status = serial_in(up, UART_LSR);
} while ((*status & UART_LSR_DR) && (max_count-- > 0));
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&up->port.state->port);
/* work around Errata #20 according to
* Intel(R) PXA27x Processor Family
diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index 5d4b9b449b4a..af6b3e3ad24d 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -188,7 +188,6 @@ static void sa1100_enable_ms(struct uart_port *port)
static void
sa1100_rx_chars(struct sa1100_port *sport)
{
- struct tty_struct *tty = sport->port.state->port.tty;
unsigned int status, ch, flg;
status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) |
@@ -233,7 +232,7 @@ sa1100_rx_chars(struct sa1100_port *sport)
status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) |
UTSR0_TO_SM(UART_GET_UTSR0(sport));
}
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&sport->port.state->port);
}
static void sa1100_tx_chars(struct sa1100_port *sport)
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 0684529eb2ad..3aa3c4c83f8b 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -220,7 +220,6 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id)
{
struct s3c24xx_uart_port *ourport = dev_id;
struct uart_port *port = &ourport->port;
- struct tty_struct *tty = port->state->port.tty;
unsigned int ufcon, ch, flag, ufstat, uerstat;
unsigned long flags;
int max_count = 64;
@@ -298,7 +297,7 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id)
ignore_char:
continue;
}
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->state->port);
out:
spin_unlock_irqrestore(&port->lock, flags);
diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c
index f76b1688c5c8..a7cdec2962dd 100644
--- a/drivers/tty/serial/sb1250-duart.c
+++ b/drivers/tty/serial/sb1250-duart.c
@@ -384,7 +384,7 @@ static void sbd_receive_chars(struct sbd_port *sport)
uart_insert_char(uport, status, M_DUART_OVRUN_ERR, ch, flag);
}
- tty_flip_buffer_push(uport->state->port.tty);
+ tty_flip_buffer_push(&uport->state->port);
}
static void sbd_transmit_chars(struct sbd_port *sport)
diff --git a/drivers/tty/serial/sc26xx.c b/drivers/tty/serial/sc26xx.c
index 0cd0e4ac12a6..c9735680762d 100644
--- a/drivers/tty/serial/sc26xx.c
+++ b/drivers/tty/serial/sc26xx.c
@@ -136,20 +136,17 @@ static void sc26xx_disable_irq(struct uart_port *port, int mask)
WRITE_SC(port, IMR, up->imr);
}
-static struct tty_struct *receive_chars(struct uart_port *port)
+static bool receive_chars(struct uart_port *port)
{
struct tty_port *tport = NULL;
- struct tty_struct *tty = NULL;
int limit = 10000;
unsigned char ch;
char flag;
u8 status;
/* FIXME what is this trying to achieve? */
- if (port->state != NULL) { /* Unopened serial console */
+ if (port->state != NULL) /* Unopened serial console */
tport = &port->state->port;
- tty = tport->tty;
- }
while (limit-- > 0) {
status = READ_SC_PORT(port, SR);
@@ -191,7 +188,7 @@ static struct tty_struct *receive_chars(struct uart_port *port)
tty_insert_flip_char(tport, ch, flag);
}
- return tty;
+ return !!tport;
}
static void transmit_chars(struct uart_port *port)
@@ -221,36 +218,36 @@ static void transmit_chars(struct uart_port *port)
static irqreturn_t sc26xx_interrupt(int irq, void *dev_id)
{
struct uart_sc26xx_port *up = dev_id;
- struct tty_struct *tty;
unsigned long flags;
+ bool push;
u8 isr;
spin_lock_irqsave(&up->port[0].lock, flags);
- tty = NULL;
+ push = false;
isr = READ_SC(&up->port[0], ISR);
if (isr & ISR_TXRDYA)
transmit_chars(&up->port[0]);
if (isr & ISR_RXRDYA)
- tty = receive_chars(&up->port[0]);
+ push = receive_chars(&up->port[0]);
spin_unlock(&up->port[0].lock);
- if (tty)
- tty_flip_buffer_push(tty);
+ if (push)
+ tty_flip_buffer_push(&up->port[0].state->port);
spin_lock(&up->port[1].lock);
- tty = NULL;
+ push = false;
if (isr & ISR_TXRDYB)
transmit_chars(&up->port[1]);
if (isr & ISR_RXRDYB)
- tty = receive_chars(&up->port[1]);
+ push = receive_chars(&up->port[1]);
spin_unlock_irqrestore(&up->port[1].lock, flags);
- if (tty)
- tty_flip_buffer_push(tty);
+ if (push)
+ tty_flip_buffer_push(&up->port[1].state->port);
return IRQ_HANDLED;
}
diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c
index 418b495e3233..2ced871becff 100644
--- a/drivers/tty/serial/sccnxp.c
+++ b/drivers/tty/serial/sccnxp.c
@@ -285,10 +285,6 @@ static void sccnxp_handle_rx(struct uart_port *port)
{
u8 sr;
unsigned int ch, flag;
- struct tty_struct *tty = tty_port_tty_get(&port->state->port);
-
- if (!tty)
- return;
for (;;) {
sr = sccnxp_port_read(port, SCCNXP_SR_REG);
@@ -333,9 +329,7 @@ static void sccnxp_handle_rx(struct uart_port *port)
uart_insert_char(port, sr, SR_OVR, ch, flag);
}
- tty_flip_buffer_push(tty);
-
- tty_kref_put(tty);
+ tty_flip_buffer_push(&port->state->port);
}
static void sccnxp_handle_tx(struct uart_port *port)
diff --git a/drivers/tty/serial/serial_ks8695.c b/drivers/tty/serial/serial_ks8695.c
index 9bd004f9da89..e1caa99e3d3b 100644
--- a/drivers/tty/serial/serial_ks8695.c
+++ b/drivers/tty/serial/serial_ks8695.c
@@ -153,7 +153,6 @@ static void ks8695uart_disable_ms(struct uart_port *port)
static irqreturn_t ks8695uart_rx_chars(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
- struct tty_struct *tty = port->state->port.tty;
unsigned int status, ch, lsr, flg, max_count = 256;
status = UART_GET_LSR(port); /* clears pending LSR interrupts */
@@ -200,7 +199,7 @@ static irqreturn_t ks8695uart_rx_chars(int irq, void *dev_id)
ignore_char:
status = UART_GET_LSR(port);
}
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->state->port);
return IRQ_HANDLED;
}
diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c
index b52b21aeb250..fe48a0c2b4ca 100644
--- a/drivers/tty/serial/serial_txx9.c
+++ b/drivers/tty/serial/serial_txx9.c
@@ -277,7 +277,6 @@ static void serial_txx9_initialize(struct uart_port *port)
static inline void
receive_chars(struct uart_txx9_port *up, unsigned int *status)
{
- struct tty_struct *tty = up->port.state->port.tty;
unsigned char ch;
unsigned int disr = *status;
int max_count = 256;
@@ -346,7 +345,7 @@ receive_chars(struct uart_txx9_port *up, unsigned int *status)
disr = sio_in(up, TXX9_SIDISR);
} while (!(disr & TXX9_SIDISR_UVALID) && (max_count-- > 0));
spin_unlock(&up->port.lock);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&up->port.state->port);
spin_lock(&up->port.lock);
*status = disr;
}
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index ecef748f5385..156418619949 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -597,7 +597,6 @@ static void sci_receive_chars(struct uart_port *port)
{
struct sci_port *sci_port = to_sci_port(port);
struct tty_port *tport = &port->state->port;
- struct tty_struct *tty = tport->tty;
int i, count, copied = 0;
unsigned short status;
unsigned char flag;
@@ -675,7 +674,7 @@ static void sci_receive_chars(struct uart_port *port)
if (copied) {
/* Tell the rest of the system the news. New characters! */
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(tport);
} else {
serial_port_in(port, SCxSR); /* dummy read */
serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
@@ -722,7 +721,6 @@ static int sci_handle_errors(struct uart_port *port)
int copied = 0;
unsigned short status = serial_port_in(port, SCxSR);
struct tty_port *tport = &port->state->port;
- struct tty_struct *tty = tport->tty;
struct sci_port *s = to_sci_port(port);
/*
@@ -783,7 +781,7 @@ static int sci_handle_errors(struct uart_port *port)
}
if (copied)
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(tport);
return copied;
}
@@ -791,7 +789,6 @@ static int sci_handle_errors(struct uart_port *port)
static int sci_handle_fifo_overrun(struct uart_port *port)
{
struct tty_port *tport = &port->state->port;
- struct tty_struct *tty = tport->tty;
struct sci_port *s = to_sci_port(port);
struct plat_sci_reg *reg;
int copied = 0;
@@ -806,7 +803,7 @@ static int sci_handle_fifo_overrun(struct uart_port *port)
port->icount.overrun++;
tty_insert_flip_char(tport, 0, TTY_OVERRUN);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(tport);
dev_notice(port->dev, "overrun error\n");
copied++;
@@ -820,7 +817,6 @@ static int sci_handle_breaks(struct uart_port *port)
int copied = 0;
unsigned short status = serial_port_in(port, SCxSR);
struct tty_port *tport = &port->state->port;
- struct tty_struct *tty = tport->tty;
struct sci_port *s = to_sci_port(port);
if (uart_handle_break(port))
@@ -842,7 +838,7 @@ static int sci_handle_breaks(struct uart_port *port)
}
if (copied)
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(tport);
copied += sci_handle_fifo_overrun(port);
@@ -1299,7 +1295,6 @@ static void sci_dma_rx_complete(void *arg)
{
struct sci_port *s = arg;
struct uart_port *port = &s->port;
- struct tty_struct *tty = port->state->port.tty;
unsigned long flags;
int count;
@@ -1314,7 +1309,7 @@ static void sci_dma_rx_complete(void *arg)
spin_unlock_irqrestore(&port->lock, flags);
if (count)
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->state->port);
schedule_work(&s->work_rx);
}
@@ -1408,7 +1403,6 @@ static void work_fn_rx(struct work_struct *work)
if (dma_async_is_tx_complete(s->chan_rx, s->active_rx, NULL, NULL) !=
DMA_SUCCESS) {
/* Handle incomplete DMA receive */
- struct tty_struct *tty = port->state->port.tty;
struct dma_chan *chan = s->chan_rx;
struct shdma_desc *sh_desc = container_of(desc,
struct shdma_desc, async_tx);
@@ -1424,7 +1418,7 @@ static void work_fn_rx(struct work_struct *work)
spin_unlock_irqrestore(&port->lock, flags);
if (count)
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->state->port);
sci_submit_rx(s);
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index 142217cd01f4..8f3d6c091acc 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -206,11 +206,6 @@ static unsigned int
sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count)
{
unsigned int ch, rx_count = 0;
- struct tty_struct *tty;
-
- tty = tty_port_tty_get(&port->state->port);
- if (!tty)
- return -ENODEV;
while (!(rd_regl(port, SIRFUART_RX_FIFO_STATUS) &
SIRFUART_FIFOEMPTY_MASK(port))) {
@@ -224,8 +219,7 @@ sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count)
}
port->icount.rx += rx_count;
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
+ tty_flip_buffer_push(&port->state->port);
return rx_count;
}
diff --git a/drivers/tty/serial/sn_console.c b/drivers/tty/serial/sn_console.c
index 283232c64656..f51ffdc696fd 100644
--- a/drivers/tty/serial/sn_console.c
+++ b/drivers/tty/serial/sn_console.c
@@ -459,7 +459,6 @@ sn_receive_chars(struct sn_cons_port *port, unsigned long flags)
{
struct tty_port *tport = NULL;
int ch;
- struct tty_struct *tty;
if (!port) {
printk(KERN_ERR "sn_receive_chars - port NULL so can't receive\n");
@@ -474,11 +473,6 @@ sn_receive_chars(struct sn_cons_port *port, unsigned long flags)
if (port->sc_port.state) {
/* The serial_core stuffs are initialized, use them */
tport = &port->sc_port.state->port;
- tty = tport->tty;
- }
- else {
- /* Not registered yet - can't pass to tty layer. */
- tty = NULL;
}
while (port->sc_ops->sal_input_pending()) {
@@ -518,15 +512,15 @@ sn_receive_chars(struct sn_cons_port *port, unsigned long flags)
#endif /* CONFIG_MAGIC_SYSRQ */
/* record the character to pass up to the tty layer */
- if (tty) {
+ if (tport) {
if (tty_insert_flip_char(tport, ch, TTY_NORMAL) == 0)
break;
}
port->sc_port.icount.rx++;
}
- if (tty)
- tty_flip_buffer_push(tty);
+ if (tport)
+ tty_flip_buffer_push(tport);
}
/**
diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c
index defe92b19e16..ba60708053e0 100644
--- a/drivers/tty/serial/sunhv.c
+++ b/drivers/tty/serial/sunhv.c
@@ -181,17 +181,17 @@ static struct sunhv_ops bywrite_ops = {
static struct sunhv_ops *sunhv_ops = &bychar_ops;
-static struct tty_struct *receive_chars(struct uart_port *port)
+static struct tty_port *receive_chars(struct uart_port *port)
{
- struct tty_struct *tty = NULL;
+ struct tty_port *tport = NULL;
if (port->state != NULL) /* Unopened serial console */
- tty = port->state->port.tty;
+ tport = &port->state->port;
if (sunhv_ops->receive_chars(port))
sun_do_break();
- return tty;
+ return tport;
}
static void transmit_chars(struct uart_port *port)
@@ -214,16 +214,16 @@ static void transmit_chars(struct uart_port *port)
static irqreturn_t sunhv_interrupt(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
- struct tty_struct *tty;
+ struct tty_port *tport;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
- tty = receive_chars(port);
+ tport = receive_chars(port);
transmit_chars(port);
spin_unlock_irqrestore(&port->lock, flags);
- if (tty)
- tty_flip_buffer_push(tty);
+ if (tport)
+ tty_flip_buffer_push(tport);
return IRQ_HANDLED;
}
diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c
index 4abc4d43a8e8..8de2213664e0 100644
--- a/drivers/tty/serial/sunsab.c
+++ b/drivers/tty/serial/sunsab.c
@@ -107,22 +107,19 @@ static __inline__ void sunsab_cec_wait(struct uart_sunsab_port *up)
udelay(1);
}
-static struct tty_struct *
+static struct tty_port *
receive_chars(struct uart_sunsab_port *up,
union sab82532_irq_status *stat)
{
struct tty_port *port = NULL;
- struct tty_struct *tty = NULL;
unsigned char buf[32];
int saw_console_brk = 0;
int free_fifo = 0;
int count = 0;
int i;
- if (up->port.state != NULL) { /* Unopened serial console */
+ if (up->port.state != NULL) /* Unopened serial console */
port = &up->port.state->port;
- tty = port->tty;
- }
/* Read number of BYTES (Character + Status) available. */
if (stat->sreg.isr0 & SAB82532_ISR0_RPF) {
@@ -139,7 +136,7 @@ receive_chars(struct uart_sunsab_port *up,
if (stat->sreg.isr0 & SAB82532_ISR0_TIME) {
sunsab_cec_wait(up);
writeb(SAB82532_CMDR_RFRD, &up->regs->w.cmdr);
- return tty;
+ return port;
}
if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
@@ -219,7 +216,7 @@ receive_chars(struct uart_sunsab_port *up,
if (saw_console_brk)
sun_do_break();
- return tty;
+ return port;
}
static void sunsab_stop_tx(struct uart_port *);
@@ -302,7 +299,7 @@ static void check_status(struct uart_sunsab_port *up,
static irqreturn_t sunsab_interrupt(int irq, void *dev_id)
{
struct uart_sunsab_port *up = dev_id;
- struct tty_struct *tty;
+ struct tty_port *port = NULL;
union sab82532_irq_status status;
unsigned long flags;
unsigned char gis;
@@ -316,12 +313,11 @@ static irqreturn_t sunsab_interrupt(int irq, void *dev_id)
if (gis & 2)
status.sreg.isr1 = readb(&up->regs->r.isr1);
- tty = NULL;
if (status.stat) {
if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME |
SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) ||
(status.sreg.isr1 & SAB82532_ISR1_BRK))
- tty = receive_chars(up, &status);
+ port = receive_chars(up, &status);
if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) ||
(status.sreg.isr1 & SAB82532_ISR1_CSC))
check_status(up, &status);
@@ -331,8 +327,8 @@ static irqreturn_t sunsab_interrupt(int irq, void *dev_id)
spin_unlock_irqrestore(&up->port.lock, flags);
- if (tty)
- tty_flip_buffer_push(tty);
+ if (port)
+ tty_flip_buffer_push(port);
return IRQ_HANDLED;
}
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index 52325968b06c..e343d6670854 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -315,11 +315,10 @@ static void sunsu_enable_ms(struct uart_port *port)
spin_unlock_irqrestore(&up->port.lock, flags);
}
-static struct tty_struct *
+static void
receive_chars(struct uart_sunsu_port *up, unsigned char *status)
{
struct tty_port *port = &up->port.state->port;
- struct tty_struct *tty = port->tty;
unsigned char ch, flag;
int max_count = 256;
int saw_console_brk = 0;
@@ -391,8 +390,6 @@ receive_chars(struct uart_sunsu_port *up, unsigned char *status)
if (saw_console_brk)
sun_do_break();
-
- return tty;
}
static void transmit_chars(struct uart_sunsu_port *up)
@@ -461,20 +458,16 @@ static irqreturn_t sunsu_serial_interrupt(int irq, void *dev_id)
spin_lock_irqsave(&up->port.lock, flags);
do {
- struct tty_struct *tty;
-
status = serial_inp(up, UART_LSR);
- tty = NULL;
if (status & UART_LSR_DR)
- tty = receive_chars(up, &status);
+ receive_chars(up, &status);
check_modem_status(up);
if (status & UART_LSR_THRE)
transmit_chars(up);
spin_unlock_irqrestore(&up->port.lock, flags);
- if (tty)
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&up->port.state->port);
spin_lock_irqsave(&up->port.lock, flags);
diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c
index 4a11be3849f6..27669ff3d446 100644
--- a/drivers/tty/serial/sunzilog.c
+++ b/drivers/tty/serial/sunzilog.c
@@ -323,19 +323,15 @@ static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up,
}
}
-static struct tty_struct *
+static struct tty_port *
sunzilog_receive_chars(struct uart_sunzilog_port *up,
struct zilog_channel __iomem *channel)
{
struct tty_port *port = NULL;
- struct tty_struct *tty;
unsigned char ch, r1, flag;
- tty = NULL;
- if (up->port.state != NULL) { /* Unopened serial console */
+ if (up->port.state != NULL) /* Unopened serial console */
port = &up->port.state->port;
- tty = port->tty; /* mouse => tty is NULL */
- }
for (;;) {
@@ -403,7 +399,7 @@ sunzilog_receive_chars(struct uart_sunzilog_port *up,
tty_insert_flip_char(port, 0, TTY_OVERRUN);
}
- return tty;
+ return port;
}
static void sunzilog_status_handle(struct uart_sunzilog_port *up,
@@ -536,21 +532,21 @@ static irqreturn_t sunzilog_interrupt(int irq, void *dev_id)
while (up) {
struct zilog_channel __iomem *channel
= ZILOG_CHANNEL_FROM_PORT(&up->port);
- struct tty_struct *tty;
+ struct tty_port *port;
unsigned char r3;
spin_lock(&up->port.lock);
r3 = read_zsreg(channel, R3);
/* Channel A */
- tty = NULL;
+ port = NULL;
if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
writeb(RES_H_IUS, &channel->control);
ZSDELAY();
ZS_WSYNC(channel);
if (r3 & CHARxIP)
- tty = sunzilog_receive_chars(up, channel);
+ port = sunzilog_receive_chars(up, channel);
if (r3 & CHAEXT)
sunzilog_status_handle(up, channel);
if (r3 & CHATxIP)
@@ -558,22 +554,22 @@ static irqreturn_t sunzilog_interrupt(int irq, void *dev_id)
}
spin_unlock(&up->port.lock);
- if (tty)
- tty_flip_buffer_push(tty);
+ if (port)
+ tty_flip_buffer_push(port);
/* Channel B */
up = up->next;
channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
spin_lock(&up->port.lock);
- tty = NULL;
+ port = NULL;
if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
writeb(RES_H_IUS, &channel->control);
ZSDELAY();
ZS_WSYNC(channel);
if (r3 & CHBRxIP)
- tty = sunzilog_receive_chars(up, channel);
+ port = sunzilog_receive_chars(up, channel);
if (r3 & CHBEXT)
sunzilog_status_handle(up, channel);
if (r3 & CHBTxIP)
@@ -581,8 +577,8 @@ static irqreturn_t sunzilog_interrupt(int irq, void *dev_id)
}
spin_unlock(&up->port.lock);
- if (tty)
- tty_flip_buffer_push(tty);
+ if (port)
+ tty_flip_buffer_push(port);
up = up->next;
}
diff --git a/drivers/tty/serial/timbuart.c b/drivers/tty/serial/timbuart.c
index f40c634f7528..6818410a2bea 100644
--- a/drivers/tty/serial/timbuart.c
+++ b/drivers/tty/serial/timbuart.c
@@ -100,7 +100,7 @@ static void timbuart_rx_chars(struct uart_port *port)
}
spin_unlock(&port->lock);
- tty_flip_buffer_push(port->state->port.tty);
+ tty_flip_buffer_push(tport);
spin_lock(&port->lock);
dev_dbg(port->dev, "%s - total read %d bytes\n",
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 5caf1f0ebc82..5486505e87c7 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -156,7 +156,7 @@ static irqreturn_t ulite_isr(int irq, void *dev_id)
/* work done? */
if (n > 1) {
- tty_flip_buffer_push(port->state->port.tty);
+ tty_flip_buffer_push(&port->state->port);
return IRQ_HANDLED;
} else {
return IRQ_NONE;
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 7a2378627fa5..7355303dad99 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -470,7 +470,6 @@ static void qe_uart_int_rx(struct uart_qe_port *qe_port)
unsigned char ch, *cp;
struct uart_port *port = &qe_port->port;
struct tty_port *tport = &port->state->port;
- struct tty_struct *tty = tport->tty;
struct qe_bd *bdp;
u16 status;
unsigned int flg;
@@ -531,7 +530,7 @@ error_return:
qe_port->rx_cur = bdp;
/* Activate BH processing */
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(tport);
return;
diff --git a/drivers/tty/serial/vr41xx_siu.c b/drivers/tty/serial/vr41xx_siu.c
index 62ee0166bc65..f655997f44af 100644
--- a/drivers/tty/serial/vr41xx_siu.c
+++ b/drivers/tty/serial/vr41xx_siu.c
@@ -313,12 +313,10 @@ static void siu_break_ctl(struct uart_port *port, int ctl)
static inline void receive_chars(struct uart_port *port, uint8_t *status)
{
- struct tty_struct *tty;
uint8_t lsr, ch;
char flag;
int max_count = RX_MAX_COUNT;
- tty = port->state->port.tty;
lsr = *status;
do {
@@ -365,7 +363,7 @@ static inline void receive_chars(struct uart_port *port, uint8_t *status)
lsr = siu_read(port, UART_LSR);
} while ((lsr & UART_LSR_DR) && (max_count-- > 0));
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->state->port);
*status = lsr;
}
diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index 7f4112423f3d..f1a398c672fa 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -137,15 +137,6 @@ static void vt8500_enable_ms(struct uart_port *port)
static void handle_rx(struct uart_port *port)
{
struct tty_port *tport = &port->state->port;
- struct tty_struct *tty = tty_port_tty_get(tport);
- if (!tty) {
- /* Discard data: no tty available */
- int count = (vt8500_read(port, VT8500_URFIDX) & 0x1f00) >> 8;
- u16 ch;
- while (count--)
- ch = readw(port->membase + VT8500_RXFIFO);
- return;
- }
/*
* Handle overrun
@@ -178,8 +169,7 @@ static void handle_rx(struct uart_port *port)
tty_insert_flip_char(tport, c, flag);
}
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
+ tty_flip_buffer_push(tport);
}
static void handle_tx(struct uart_port *port)
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 9ab910370c56..82a3151e393c 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -147,15 +147,11 @@
static irqreturn_t xuartps_isr(int irq, void *dev_id)
{
struct uart_port *port = (struct uart_port *)dev_id;
- struct tty_struct *tty;
unsigned long flags;
unsigned int isrstatus, numbytes;
unsigned int data;
char status = TTY_NORMAL;
- /* Get the tty which could be NULL so don't assume it's valid */
- tty = tty_port_tty_get(&port->state->port);
-
spin_lock_irqsave(&port->lock, flags);
/* Read the interrupt status register to determine which
@@ -187,14 +183,11 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
} else if (isrstatus & XUARTPS_IXR_OVERRUN)
port->icount.overrun++;
- if (tty)
- uart_insert_char(port, isrstatus,
- XUARTPS_IXR_OVERRUN, data,
- status);
+ uart_insert_char(port, isrstatus, XUARTPS_IXR_OVERRUN,
+ data, status);
}
spin_unlock(&port->lock);
- if (tty)
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->state->port);
spin_lock(&port->lock);
}
@@ -237,7 +230,6 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
/* be sure to release the lock and tty before leaving */
spin_unlock_irqrestore(&port->lock, flags);
- tty_kref_put(tty);
return IRQ_HANDLED;
}
diff --git a/drivers/tty/serial/zs.c b/drivers/tty/serial/zs.c
index 92c00b24d0df..6a169877109b 100644
--- a/drivers/tty/serial/zs.c
+++ b/drivers/tty/serial/zs.c
@@ -603,7 +603,7 @@ static void zs_receive_chars(struct zs_port *zport)
uart_insert_char(uport, status, Rx_OVR, ch, flag);
}
- tty_flip_buffer_push(uport->state->port.tty);
+ tty_flip_buffer_push(&uport->state->port);
}
static void zs_raw_transmit_chars(struct zs_port *zport)
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 2f6967d61a80..555fdc0ed0f1 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -1439,7 +1439,6 @@ static void mgsl_isr_receive_data( struct mgsl_struct *info )
u16 status;
int work = 0;
unsigned char DataByte;
- struct tty_struct *tty = info->port.tty;
struct mgsl_icount *icount = &info->icount;
if ( debug_level >= DEBUG_LEVEL_ISR )
@@ -1501,7 +1500,7 @@ static void mgsl_isr_receive_data( struct mgsl_struct *info )
if (status & RXSTATUS_BREAK_RECEIVED) {
flag = TTY_BREAK;
if (info->port.flags & ASYNC_SAK)
- do_SAK(tty);
+ do_SAK(info->port.tty);
} else if (status & RXSTATUS_PARITY_ERROR)
flag = TTY_PARITY;
else if (status & RXSTATUS_FRAMING_ERROR)
@@ -1524,7 +1523,7 @@ static void mgsl_isr_receive_data( struct mgsl_struct *info )
}
if(work)
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&info->port);
}
/* mgsl_isr_misc()
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index 9a0358a1e0dd..fced6acc74ee 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -1854,7 +1854,6 @@ static void hdlcdev_exit(struct slgt_info *info)
*/
static void rx_async(struct slgt_info *info)
{
- struct tty_struct *tty = info->port.tty;
struct mgsl_icount *icount = &info->icount;
unsigned int start, end;
unsigned char *p;
@@ -1915,8 +1914,8 @@ static void rx_async(struct slgt_info *info)
break;
}
- if (tty && chars)
- tty_flip_buffer_push(tty);
+ if (chars)
+ tty_flip_buffer_push(&info->port);
}
/*
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index 419f58ff4a13..e4a2904af565 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -2167,7 +2167,6 @@ static void isr_rxrdy(SLMP_INFO * info)
{
u16 status;
unsigned char DataByte;
- struct tty_struct *tty = info->port.tty;
struct mgsl_icount *icount = &info->icount;
if ( debug_level >= DEBUG_LEVEL_ISR )
@@ -2225,8 +2224,7 @@ static void isr_rxrdy(SLMP_INFO * info)
icount->frame,icount->overrun);
}
- if ( tty )
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&info->port);
}
static void isr_txeom(SLMP_INFO * info, unsigned char status)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 1bfe97a8e2eb..b6efacadf23b 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -544,7 +544,7 @@ void tty_flush_to_ldisc(struct tty_struct *tty)
/**
* tty_flip_buffer_push - terminal
- * @tty: tty to push
+ * @port: tty port to push
*
* Queue a push of the terminal flip buffers to the line discipline. This
* function must not be called from IRQ context if port->low_latency is
@@ -556,9 +556,9 @@ void tty_flush_to_ldisc(struct tty_struct *tty)
* Locking: tty buffer lock. Driver locks in low latency mode.
*/
-void tty_flip_buffer_push(struct tty_struct *tty)
+void tty_flip_buffer_push(struct tty_port *port)
{
- struct tty_bufhead *buf = &tty->port->buf;
+ struct tty_bufhead *buf = &port->buf;
unsigned long flags;
spin_lock_irqsave(&buf->lock, flags);
@@ -566,7 +566,7 @@ void tty_flip_buffer_push(struct tty_struct *tty)
buf->tail->commit = buf->tail->used;
spin_unlock_irqrestore(&buf->lock, flags);
- if (tty->port->low_latency)
+ if (port->low_latency)
flush_to_ldisc(&buf->work);
else
schedule_work(&buf->work);
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 20dc2add27ba..15b36e2efa85 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -410,20 +410,12 @@ static int acm_submit_read_urbs(struct acm *acm, gfp_t mem_flags)
static void acm_process_read_urb(struct acm *acm, struct urb *urb)
{
- struct tty_struct *tty;
-
if (!urb->actual_length)
return;
- tty = tty_port_tty_get(&acm->port);
- if (!tty)
- return;
-
tty_insert_flip_string(&acm->port, urb->transfer_buffer,
urb->actual_length);
- tty_flip_buffer_push(tty);
-
- tty_kref_put(tty);
+ tty_flip_buffer_push(&acm->port);
}
static void acm_read_bulk_callback(struct urb *urb)
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 3560799d530a..ca4fc3d3e7ff 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -551,8 +551,8 @@ static void gs_rx_push(unsigned long _port)
/* Push from tty to ldisc; without low_latency set this is handled by
* a workqueue, so we won't get callbacks and can hold port_lock
*/
- if (tty && do_push)
- tty_flip_buffer_push(tty);
+ if (do_push)
+ tty_flip_buffer_push(&port->port);
/* We want our data queue to become empty ASAP, keeping data
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 3bb1f8f11fc8..6e320cec397d 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -140,16 +140,11 @@ static void aircable_process_read_urb(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
char *data = (char *)urb->transfer_buffer;
- struct tty_struct *tty;
int has_headers;
int count;
int len;
int i;
- tty = tty_port_tty_get(&port->port);
- if (!tty)
- return;
-
has_headers = (urb->actual_length > 2 && data[0] == RX_HEADER_0);
count = 0;
@@ -160,8 +155,7 @@ static void aircable_process_read_urb(struct urb *urb)
}
if (count)
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
+ tty_flip_buffer_push(&port->port);
}
static struct usb_serial_driver aircable_device = {
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 1614feb6a76e..cbd904b8fba5 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -674,7 +674,6 @@ static void ark3116_process_read_urb(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct ark3116_private *priv = usb_get_serial_port_data(port);
- struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
char tty_flag = TTY_NORMAL;
unsigned long flags;
@@ -689,10 +688,6 @@ static void ark3116_process_read_urb(struct urb *urb)
if (!urb->actual_length)
return;
- tty = tty_port_tty_get(&port->port);
- if (!tty)
- return;
-
if (lsr & UART_LSR_BRK_ERROR_BITS) {
if (lsr & UART_LSR_BI)
tty_flag = TTY_BREAK;
@@ -707,8 +702,7 @@ static void ark3116_process_read_urb(struct urb *urb)
}
tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag,
urb->actual_length);
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
+ tty_flip_buffer_push(&port->port);
}
static struct usb_serial_driver ark3116_device = {
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 7ba2c0bdcec9..84217e78ded4 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -242,7 +242,6 @@ static void belkin_sa_process_read_urb(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct belkin_sa_private *priv = usb_get_serial_port_data(port);
- struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
unsigned long flags;
unsigned char status;
@@ -259,10 +258,6 @@ static void belkin_sa_process_read_urb(struct urb *urb)
if (!urb->actual_length)
return;
- tty = tty_port_tty_get(&port->port);
- if (!tty)
- return;
-
if (status & BELKIN_SA_LSR_ERR) {
/* Break takes precedence over parity, which takes precedence
* over framing errors. */
@@ -281,8 +276,7 @@ static void belkin_sa_process_read_urb(struct urb *urb)
tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag,
urb->actual_length);
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
+ tty_flip_buffer_push(&port->port);
}
static void belkin_sa_set_termios(struct tty_struct *tty,
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index e6976a974472..629bd2894506 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -324,7 +324,6 @@ static void cyberjack_read_bulk_callback(struct urb *urb)
struct usb_serial_port *port = urb->context;
struct cyberjack_private *priv = usb_get_serial_port_data(port);
struct device *dev = &port->dev;
- struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
short todo;
int result;
@@ -337,16 +336,10 @@ static void cyberjack_read_bulk_callback(struct urb *urb)
return;
}
- tty = tty_port_tty_get(&port->port);
- if (!tty) {
- dev_dbg(dev, "%s - ignoring since device not open\n", __func__);
- return;
- }
if (urb->actual_length) {
tty_insert_flip_string(&port->port, data, urb->actual_length);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->port);
}
- tty_kref_put(tty);
spin_lock(&priv->lock);
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index ac14e3eb95ea..8efa19d0e9fb 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -1214,10 +1214,10 @@ static void cypress_read_int_callback(struct urb *urb)
spin_unlock_irqrestore(&priv->lock, flags);
/* process read if there is data other than line status */
- if (tty && bytes > i) {
+ if (bytes > i) {
tty_insert_flip_string_fixed_flag(&port->port, data + i,
tty_flag, bytes - i);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->port);
}
spin_lock_irqsave(&priv->lock, flags);
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index b5fa738512ca..ebe45fa0ed50 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -1399,9 +1399,7 @@ static void digi_read_bulk_callback(struct urb *urb)
static int digi_read_inb_callback(struct urb *urb)
{
-
struct usb_serial_port *port = urb->context;
- struct tty_struct *tty;
struct digi_port *priv = usb_get_serial_port_data(port);
int opcode = ((unsigned char *)urb->transfer_buffer)[0];
int len = ((unsigned char *)urb->transfer_buffer)[1];
@@ -1425,7 +1423,6 @@ static int digi_read_inb_callback(struct urb *urb)
return -1;
}
- tty = tty_port_tty_get(&port->port);
spin_lock(&priv->dp_port_lock);
/* check for throttle; if set, do not resubmit read urb */
@@ -1435,7 +1432,7 @@ static int digi_read_inb_callback(struct urb *urb)
priv->dp_throttle_restart = 1;
/* receive data */
- if (tty && opcode == DIGI_CMD_RECEIVE_DATA) {
+ if (opcode == DIGI_CMD_RECEIVE_DATA) {
/* get flag from port_status */
flag = 0;
@@ -1457,11 +1454,10 @@ static int digi_read_inb_callback(struct urb *urb)
if (len > 0) {
tty_insert_flip_string_fixed_flag(&port->port, data,
flag, len);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->port);
}
}
spin_unlock(&priv->dp_port_lock);
- tty_kref_put(tty);
if (opcode == DIGI_CMD_RECEIVE_DISABLE)
dev_dbg(&port->dev, "%s: got RECEIVE_DISABLE\n", __func__);
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 6b880c33d258..b1b2dc64b50b 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -100,7 +100,6 @@ static void f81232_process_read_urb(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct f81232_private *priv = usb_get_serial_port_data(port);
- struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
char tty_flag = TTY_NORMAL;
unsigned long flags;
@@ -117,10 +116,6 @@ static void f81232_process_read_urb(struct urb *urb)
if (!urb->actual_length)
return;
- tty = tty_port_tty_get(&port->port);
- if (!tty)
- return;
-
/* break takes precedence over parity, */
/* which takes precedence over framing errors */
if (line_status & UART_BREAK_ERROR)
@@ -145,8 +140,7 @@ static void f81232_process_read_urb(struct urb *urb)
urb->actual_length);
}
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
+ tty_flip_buffer_push(&port->port);
}
static int set_control_lines(struct usb_device *dev, u8 value)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index eb59ba3789ad..a96083b7fabc 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2040,25 +2040,19 @@ static int ftdi_process_packet(struct usb_serial_port *port,
static void ftdi_process_read_urb(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
- struct tty_struct *tty;
struct ftdi_private *priv = usb_get_serial_port_data(port);
char *data = (char *)urb->transfer_buffer;
int i;
int len;
int count = 0;
- tty = tty_port_tty_get(&port->port);
- if (!tty)
- return;
-
for (i = 0; i < urb->actual_length; i += priv->max_packet_size) {
len = min_t(int, urb->actual_length - i, priv->max_packet_size);
count += ftdi_process_packet(port, priv, &data[i], len);
}
if (count)
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
+ tty_flip_buffer_push(&port->port);
}
static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 498b5f0da639..1a07b12ef341 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -252,14 +252,11 @@ static inline int isAbortTrfCmnd(const unsigned char *buf)
static void send_to_tty(struct usb_serial_port *port,
char *data, unsigned int actual_length)
{
- struct tty_struct *tty = tty_port_tty_get(&port->port);
-
- if (tty && actual_length) {
+ if (actual_length) {
usb_serial_debug_data(&port->dev, __func__, actual_length, data);
tty_insert_flip_string(&port->port, data, actual_length);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->port);
}
- tty_kref_put(tty);
}
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 3780f6a501b3..4c5c23f1cae5 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -313,17 +313,12 @@ EXPORT_SYMBOL_GPL(usb_serial_generic_submit_read_urbs);
void usb_serial_generic_process_read_urb(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
- struct tty_struct *tty;
char *ch = (char *)urb->transfer_buffer;
int i;
if (!urb->actual_length)
return;
- tty = tty_port_tty_get(&port->port);
- if (!tty)
- return;
-
/* The per character mucking around with sysrq path it too slow for
stuff like 3G modems, so shortcircuit it in the 99.9999999% of cases
where the USB serial is not a console anyway */
@@ -335,8 +330,7 @@ void usb_serial_generic_process_read_urb(struct urb *urb)
tty_insert_flip_char(&port->port, *ch, TTY_NORMAL);
}
}
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
+ tty_flip_buffer_push(&port->port);
}
EXPORT_SYMBOL_GPL(usb_serial_generic_process_read_urb);
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index f96b91da964f..b00e5cbf741f 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -232,8 +232,8 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial,
unsigned char *buffer, __u16 bufferLength);
static void process_rcvd_status(struct edgeport_serial *edge_serial,
__u8 byte2, __u8 byte3);
-static void edge_tty_recv(struct usb_serial_port *port, struct tty_struct *tty,
- unsigned char *data, int length);
+static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data,
+ int length);
static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr);
static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData,
__u8 lsr, __u8 data);
@@ -1752,7 +1752,6 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial,
struct device *dev = &edge_serial->serial->dev->dev;
struct usb_serial_port *port;
struct edgeport_port *edge_port;
- struct tty_struct *tty;
__u16 lastBufferLength;
__u16 rxLen;
@@ -1860,14 +1859,11 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial,
edge_serial->rxPort];
edge_port = usb_get_serial_port_data(port);
if (edge_port->open) {
- tty = tty_port_tty_get(
- &edge_port->port->port);
- if (tty) {
- dev_dbg(dev, "%s - Sending %d bytes to TTY for port %d\n",
- __func__, rxLen, edge_serial->rxPort);
- edge_tty_recv(edge_port->port, tty, buffer, rxLen);
- tty_kref_put(tty);
- }
+ dev_dbg(dev, "%s - Sending %d bytes to TTY for port %d\n",
+ __func__, rxLen,
+ edge_serial->rxPort);
+ edge_tty_recv(edge_port->port, buffer,
+ rxLen);
edge_port->icount.rx += rxLen;
}
buffer += rxLen;
@@ -2017,8 +2013,8 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
* edge_tty_recv
* this function passes data on to the tty flip buffer
*****************************************************************************/
-static void edge_tty_recv(struct usb_serial_port *port, struct tty_struct *tty,
- unsigned char *data, int length)
+static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data,
+ int length)
{
int cnt;
@@ -2030,7 +2026,7 @@ static void edge_tty_recv(struct usb_serial_port *port, struct tty_struct *tty,
data += cnt;
length -= cnt;
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->port);
}
@@ -2086,14 +2082,9 @@ static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData,
}
/* Place LSR data byte into Rx buffer */
- if (lsrData) {
- struct tty_struct *tty =
- tty_port_tty_get(&edge_port->port->port);
- if (tty) {
- edge_tty_recv(edge_port->port, tty, &data, 1);
- tty_kref_put(tty);
- }
- }
+ if (lsrData)
+ edge_tty_recv(edge_port->port, &data, 1);
+
/* update input line counters */
icount = &edge_port->icount;
if (newLsr & LSR_BREAK)
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 1286a0b2e2b7..d6485be49ebf 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -201,8 +201,8 @@ static int closing_wait = EDGE_CLOSING_WAIT;
static bool ignore_cpu_rev;
static int default_uart_mode; /* RS232 */
-static void edge_tty_recv(struct usb_serial_port *port, struct tty_struct *tty,
- unsigned char *data, int length);
+static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data,
+ int length);
static void stop_read(struct edgeport_port *edge_port);
static int restart_read(struct edgeport_port *edge_port);
@@ -1540,7 +1540,6 @@ static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data,
struct async_icount *icount;
__u8 new_lsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR |
LSR_FRM_ERR | LSR_BREAK));
- struct tty_struct *tty;
dev_dbg(&edge_port->port->dev, "%s - %02x\n", __func__, new_lsr);
@@ -1554,13 +1553,8 @@ static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data,
new_lsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK);
/* Place LSR data byte into Rx buffer */
- if (lsr_data) {
- tty = tty_port_tty_get(&edge_port->port->port);
- if (tty) {
- edge_tty_recv(edge_port->port, tty, &data, 1);
- tty_kref_put(tty);
- }
- }
+ if (lsr_data)
+ edge_tty_recv(edge_port->port, &data, 1);
/* update input line counters */
icount = &edge_port->icount;
@@ -1676,7 +1670,6 @@ static void edge_bulk_in_callback(struct urb *urb)
struct edgeport_port *edge_port = urb->context;
struct device *dev = &edge_port->port->dev;
unsigned char *data = urb->transfer_buffer;
- struct tty_struct *tty;
int retval = 0;
int port_number;
int status = urb->status;
@@ -1715,18 +1708,16 @@ static void edge_bulk_in_callback(struct urb *urb)
++data;
}
- tty = tty_port_tty_get(&edge_port->port->port);
- if (tty && urb->actual_length) {
+ if (urb->actual_length) {
usb_serial_debug_data(dev, __func__, urb->actual_length, data);
if (edge_port->close_pending)
dev_dbg(dev, "%s - close pending, dropping data on the floor\n",
__func__);
else
- edge_tty_recv(edge_port->port, tty, data,
+ edge_tty_recv(edge_port->port, data,
urb->actual_length);
edge_port->icount.rx += urb->actual_length;
}
- tty_kref_put(tty);
exit:
/* continue read unless stopped */
@@ -1741,8 +1732,8 @@ exit:
dev_err(dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval);
}
-static void edge_tty_recv(struct usb_serial_port *port, struct tty_struct *tty,
- unsigned char *data, int length)
+static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data,
+ int length)
{
int queued;
@@ -1750,7 +1741,7 @@ static void edge_tty_recv(struct usb_serial_port *port, struct tty_struct *tty,
if (queued < length)
dev_err(&port->dev, "%s - dropping data, %d bytes lost\n",
__func__, length - queued);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->port);
}
static void edge_bulk_out_callback(struct urb *urb)
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 171dae1f4a62..716930ab1bb1 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -287,7 +287,6 @@ static void ir_process_read_urb(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
unsigned char *data = urb->transfer_buffer;
- struct tty_struct *tty;
if (!urb->actual_length)
return;
@@ -302,12 +301,8 @@ static void ir_process_read_urb(struct urb *urb)
if (urb->actual_length == 1)
return;
- tty = tty_port_tty_get(&port->port);
- if (!tty)
- return;
tty_insert_flip_string(&port->port, data + 1, urb->actual_length - 1);
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
+ tty_flip_buffer_push(&port->port);
}
static void ir_set_termios_callback(struct urb *urb)
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index dd0d910730c7..ff77027160aa 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -581,7 +581,6 @@ static void read_buf_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
unsigned char *data = urb->transfer_buffer;
- struct tty_struct *tty;
int status = urb->status;
if (status) {
@@ -592,14 +591,12 @@ static void read_buf_callback(struct urb *urb)
}
dev_dbg(&port->dev, "%s - %i chars to write\n", __func__, urb->actual_length);
- tty = tty_port_tty_get(&port->port);
if (data == NULL)
dev_dbg(&port->dev, "%s - data is NULL !!!\n", __func__);
- if (tty && urb->actual_length && data) {
+ if (urb->actual_length && data) {
tty_insert_flip_string(&port->port, data, urb->actual_length);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->port);
}
- tty_kref_put(tty);
iuu_led_activity_on(urb);
}
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 14a219ba4ee6..f6d7f68fa43c 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -291,7 +291,6 @@ static void usa26_indat_callback(struct urb *urb)
int i, err;
int endpoint;
struct usb_serial_port *port;
- struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
int status = urb->status;
@@ -304,8 +303,7 @@ static void usa26_indat_callback(struct urb *urb)
}
port = urb->context;
- tty = tty_port_tty_get(&port->port);
- if (tty && urb->actual_length) {
+ if (urb->actual_length) {
/* 0x80 bit is error flag */
if ((data[0] & 0x80) == 0) {
/* no errors on individual bytes, only
@@ -332,9 +330,8 @@ static void usa26_indat_callback(struct urb *urb)
flag);
}
}
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->port);
}
- tty_kref_put(tty);
/* Resubmit urb so we continue receiving */
err = usb_submit_urb(urb, GFP_ATOMIC);
@@ -447,7 +444,6 @@ static void usa28_indat_callback(struct urb *urb)
{
int err;
struct usb_serial_port *port;
- struct tty_struct *tty;
unsigned char *data;
struct keyspan_port_private *p_priv;
int status = urb->status;
@@ -470,13 +466,11 @@ static void usa28_indat_callback(struct urb *urb)
p_priv = usb_get_serial_port_data(port);
data = urb->transfer_buffer;
- tty = tty_port_tty_get(&port->port);
- if (tty && urb->actual_length) {
+ if (urb->actual_length) {
tty_insert_flip_string(&port->port, data,
urb->actual_length);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->port);
}
- tty_kref_put(tty);
/* Resubmit urb so we continue receiving */
err = usb_submit_urb(urb, GFP_ATOMIC);
@@ -671,7 +665,6 @@ static void usa49_indat_callback(struct urb *urb)
int i, err;
int endpoint;
struct usb_serial_port *port;
- struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
int status = urb->status;
@@ -684,8 +677,7 @@ static void usa49_indat_callback(struct urb *urb)
}
port = urb->context;
- tty = tty_port_tty_get(&port->port);
- if (tty && urb->actual_length) {
+ if (urb->actual_length) {
/* 0x80 bit is error flag */
if ((data[0] & 0x80) == 0) {
/* no error on any byte */
@@ -706,9 +698,8 @@ static void usa49_indat_callback(struct urb *urb)
flag);
}
}
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->port);
}
- tty_kref_put(tty);
/* Resubmit urb so we continue receiving */
err = usb_submit_urb(urb, GFP_ATOMIC);
@@ -721,7 +712,6 @@ static void usa49wg_indat_callback(struct urb *urb)
int i, len, x, err;
struct usb_serial *serial;
struct usb_serial_port *port;
- struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
int status = urb->status;
@@ -746,7 +736,6 @@ static void usa49wg_indat_callback(struct urb *urb)
return;
}
port = serial->port[data[i++]];
- tty = tty_port_tty_get(&port->port);
len = data[i++];
/* 0x80 bit is error flag */
@@ -774,8 +763,7 @@ static void usa49wg_indat_callback(struct urb *urb)
i += 2;
}
}
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
+ tty_flip_buffer_push(&port->port);
}
}
@@ -796,7 +784,6 @@ static void usa90_indat_callback(struct urb *urb)
int endpoint;
struct usb_serial_port *port;
struct keyspan_port_private *p_priv;
- struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
int status = urb->status;
@@ -812,7 +799,6 @@ static void usa90_indat_callback(struct urb *urb)
p_priv = usb_get_serial_port_data(port);
if (urb->actual_length) {
- tty = tty_port_tty_get(&port->port);
/* if current mode is DMA, looks like usa28 format
otherwise looks like usa26 data format */
@@ -848,8 +834,7 @@ static void usa90_indat_callback(struct urb *urb)
}
}
}
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
+ tty_flip_buffer_push(&port->port);
}
/* Resubmit urb so we continue receiving */
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 334b1a295c6b..3b17d5d13dc8 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -138,7 +138,6 @@ static void keyspan_pda_request_unthrottle(struct work_struct *work)
static void keyspan_pda_rx_interrupt(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
- struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
int retval;
int status = urb->status;
@@ -163,14 +162,12 @@ static void keyspan_pda_rx_interrupt(struct urb *urb)
/* see if the message is data or a status interrupt */
switch (data[0]) {
case 0:
- tty = tty_port_tty_get(&port->port);
/* rest of message is rx data */
- if (tty && urb->actual_length) {
+ if (urb->actual_length) {
tty_insert_flip_string(&port->port, data + 1,
urb->actual_length - 1);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->port);
}
- tty_kref_put(tty);
break;
case 1:
/* status interrupt */
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 8ee0825ad700..769d910ae0a5 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -389,7 +389,6 @@ static void klsi_105_process_read_urb(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
unsigned char *data = urb->transfer_buffer;
- struct tty_struct *tty;
unsigned len;
/* empty urbs seem to happen, we ignore them */
@@ -401,10 +400,6 @@ static void klsi_105_process_read_urb(struct urb *urb)
return;
}
- tty = tty_port_tty_get(&port->port);
- if (!tty)
- return;
-
len = get_unaligned_le16(data);
if (len > urb->actual_length - KLSI_HDR_LEN) {
dev_dbg(&port->dev, "%s - packet length mismatch\n", __func__);
@@ -412,8 +407,7 @@ static void klsi_105_process_read_urb(struct urb *urb)
}
tty_insert_flip_string(&port->port, data + KLSI_HDR_LEN, len);
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
+ tty_flip_buffer_push(&port->port);
}
static void klsi_105_set_termios(struct tty_struct *tty,
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 135c8b4b26f7..903d938e174b 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -324,7 +324,6 @@ static void kobil_read_int_callback(struct urb *urb)
{
int result;
struct usb_serial_port *port = urb->context;
- struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
int status = urb->status;
@@ -333,8 +332,7 @@ static void kobil_read_int_callback(struct urb *urb)
return;
}
- tty = tty_port_tty_get(&port->port);
- if (tty && urb->actual_length) {
+ if (urb->actual_length) {
/* BEGIN DEBUG */
/*
@@ -354,9 +352,8 @@ static void kobil_read_int_callback(struct urb *urb)
/* END DEBUG */
tty_insert_flip_string(&port->port, data, urb->actual_length);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->port);
}
- tty_kref_put(tty);
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
dev_dbg(&port->dev, "%s - Send read URB returns: %i\n", __func__, result);
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index ba20bb037b28..f42528e05d7b 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -531,7 +531,6 @@ static void mct_u232_read_int_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct mct_u232_private *priv = usb_get_serial_port_data(port);
- struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
int retval;
int status = urb->status;
@@ -561,13 +560,9 @@ static void mct_u232_read_int_callback(struct urb *urb)
*/
if (urb->transfer_buffer_length > 2) {
if (urb->actual_length) {
- tty = tty_port_tty_get(&port->port);
- if (tty) {
- tty_insert_flip_string(&port->port, data,
- urb->actual_length);
- tty_flip_buffer_push(tty);
- }
- tty_kref_put(tty);
+ tty_insert_flip_string(&port->port, data,
+ urb->actual_length);
+ tty_flip_buffer_push(&port->port);
}
goto exit;
}
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
index 6264f3974ea7..bf3c7a23553e 100644
--- a/drivers/usb/serial/metro-usb.c
+++ b/drivers/usb/serial/metro-usb.c
@@ -95,7 +95,6 @@ static void metrousb_read_int_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
- struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
int throttled = 0;
int result = 0;
@@ -124,15 +123,13 @@ static void metrousb_read_int_callback(struct urb *urb)
/* Set the data read from the usb port into the serial port buffer. */
- tty = tty_port_tty_get(&port->port);
- if (tty && urb->actual_length) {
+ if (urb->actual_length) {
/* Loop through the data copying each byte to the tty layer. */
tty_insert_flip_string(&port->port, data, urb->actual_length);
/* Force the data to the tty layer. */
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->port);
}
- tty_kref_put(tty);
/* Set any port variables. */
spin_lock_irqsave(&metro_priv->lock, flags);
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 22818fb765e0..e0ebec3b5d6a 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -899,7 +899,6 @@ static void mos7720_bulk_in_callback(struct urb *urb)
int retval;
unsigned char *data ;
struct usb_serial_port *port;
- struct tty_struct *tty;
int status = urb->status;
if (status) {
@@ -913,12 +912,10 @@ static void mos7720_bulk_in_callback(struct urb *urb)
data = urb->transfer_buffer;
- tty = tty_port_tty_get(&port->port);
- if (tty && urb->actual_length) {
+ if (urb->actual_length) {
tty_insert_flip_string(&port->port, data, urb->actual_length);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->port);
}
- tty_kref_put(tty);
if (port->read_urb->status != -EINPROGRESS) {
retval = usb_submit_urb(port->read_urb, GFP_ATOMIC);
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 3ddd7a1f7ff3..809fb329eca5 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -744,7 +744,6 @@ static void mos7840_bulk_in_callback(struct urb *urb)
struct usb_serial *serial;
struct usb_serial_port *port;
struct moschip_port *mos7840_port;
- struct tty_struct *tty;
int status = urb->status;
mos7840_port = urb->context;
@@ -774,12 +773,8 @@ static void mos7840_bulk_in_callback(struct urb *urb)
if (urb->actual_length) {
struct tty_port *tport = &mos7840_port->port->port;
- tty = tty_port_tty_get(tport);
- if (tty) {
- tty_insert_flip_string(tport, data, urb->actual_length);
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
- }
+ tty_insert_flip_string(tport, data, urb->actual_length);
+ tty_flip_buffer_push(tport);
mos7840_port->icount.rx += urb->actual_length;
smp_wmb();
dev_dbg(&port->dev, "mos7840_port->icount.rx is %d:\n", mos7840_port->icount.rx);
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index 0d96a1a7b9e5..38725fc8c2c8 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -32,7 +32,6 @@ static void navman_read_int_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
unsigned char *data = urb->transfer_buffer;
- struct tty_struct *tty;
int status = urb->status;
int result;
@@ -55,12 +54,10 @@ static void navman_read_int_callback(struct urb *urb)
usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
- tty = tty_port_tty_get(&port->port);
- if (tty && urb->actual_length) {
+ if (urb->actual_length) {
tty_insert_flip_string(&port->port, data, urb->actual_length);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->port);
}
- tty_kref_put(tty);
exit:
result = usb_submit_urb(urb, GFP_ATOMIC);
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 338191bae5a3..1e1cafe287e4 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -174,14 +174,9 @@ static void omninet_read_bulk_callback(struct urb *urb)
}
if (urb->actual_length && header->oh_len) {
- struct tty_struct *tty = tty_port_tty_get(&port->port);
- if (tty) {
- tty_insert_flip_string(&port->port,
- data + OMNINET_DATAOFFSET,
- header->oh_len);
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
- }
+ tty_insert_flip_string(&port->port, data + OMNINET_DATAOFFSET,
+ header->oh_len);
+ tty_flip_buffer_push(&port->port);
}
/* Continue trying to always read */
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index d3b74e50aff1..e13e1a4d3e1e 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -51,15 +51,8 @@ struct opticon_private {
static void opticon_process_data_packet(struct usb_serial_port *port,
const unsigned char *buf, size_t len)
{
- struct tty_struct *tty;
-
- tty = tty_port_tty_get(&port->port);
- if (!tty)
- return;
-
tty_insert_flip_string(&port->port, buf, len);
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
+ tty_flip_buffer_push(&port->port);
}
static void opticon_process_status_packet(struct usb_serial_port *port,
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 7a53fe9f3af3..a958fd41b5b3 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -820,7 +820,6 @@ static void oti6858_read_bulk_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct oti6858_private *priv = usb_get_serial_port_data(port);
- struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
unsigned long flags;
int status = urb->status;
@@ -835,12 +834,10 @@ static void oti6858_read_bulk_callback(struct urb *urb)
return;
}
- tty = tty_port_tty_get(&port->port);
- if (tty != NULL && urb->actual_length > 0) {
+ if (urb->actual_length > 0) {
tty_insert_flip_string(&port->port, data, urb->actual_length);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->port);
}
- tty_kref_put(tty);
/* schedule the interrupt urb */
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 00047f3c7293..54adc9125e5c 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -772,7 +772,6 @@ static void pl2303_process_read_urb(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct pl2303_private *priv = usb_get_serial_port_data(port);
- struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
char tty_flag = TTY_NORMAL;
unsigned long flags;
@@ -789,10 +788,6 @@ static void pl2303_process_read_urb(struct urb *urb)
if (!urb->actual_length)
return;
- tty = tty_port_tty_get(&port->port);
- if (!tty)
- return;
-
/* break takes precedence over parity, */
/* which takes precedence over framing errors */
if (line_status & UART_BREAK_ERROR)
@@ -817,8 +812,7 @@ static void pl2303_process_read_urb(struct urb *urb)
urb->actual_length);
}
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
+ tty_flip_buffer_push(&port->port);
}
/* All of the device info needed for the PL2303 SIO serial converter */
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 5dccc4f957df..6850745808c3 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -609,7 +609,6 @@ void qt2_process_read_urb(struct urb *urb)
struct qt2_serial_private *serial_priv;
struct usb_serial_port *port;
struct qt2_port_private *port_priv;
- struct tty_struct *tty;
bool escapeflag;
unsigned char *ch;
int i;
@@ -620,15 +619,11 @@ void qt2_process_read_urb(struct urb *urb)
return;
ch = urb->transfer_buffer;
- tty = NULL;
serial = urb->context;
serial_priv = usb_get_serial_data(serial);
port = serial->port[serial_priv->current_port];
port_priv = usb_get_serial_port_data(port);
- if (port_priv->is_open)
- tty = tty_port_tty_get(&port->port);
-
for (i = 0; i < urb->actual_length; i++) {
ch = (unsigned char *)urb->transfer_buffer + i;
if ((i <= (len - 3)) &&
@@ -666,10 +661,7 @@ void qt2_process_read_urb(struct urb *urb)
__func__);
break;
}
- if (tty) {
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
- }
+ tty_flip_buffer_push(&port->port);
newport = *(ch + 3);
@@ -683,10 +675,6 @@ void qt2_process_read_urb(struct urb *urb)
serial_priv->current_port = newport;
port = serial->port[serial_priv->current_port];
port_priv = usb_get_serial_port_data(port);
- if (port_priv->is_open)
- tty = tty_port_tty_get(&port->port);
- else
- tty = NULL;
i += 3;
escapeflag = true;
break;
@@ -716,10 +704,7 @@ void qt2_process_read_urb(struct urb *urb)
tty_insert_flip_string(&port->port, ch, 1);
}
- if (tty) {
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
- }
+ tty_flip_buffer_push(&port->port);
}
static void qt2_write_bulk_callback(struct urb *urb)
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index ad12e9e2c7ee..21cd7bf2a8cc 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -207,38 +207,31 @@ static void safe_process_read_urb(struct urb *urb)
unsigned char *data = urb->transfer_buffer;
unsigned char length = urb->actual_length;
int actual_length;
- struct tty_struct *tty;
__u16 fcs;
if (!length)
return;
- tty = tty_port_tty_get(&port->port);
- if (!tty)
- return;
-
if (!safe)
goto out;
fcs = fcs_compute10(data, length, CRC10_INITFCS);
if (fcs) {
dev_err(&port->dev, "%s - bad CRC %x\n", __func__, fcs);
- goto err;
+ return;
}
actual_length = data[length - 2] >> 2;
if (actual_length > (length - 2)) {
dev_err(&port->dev, "%s - inconsistent lengths %d:%d\n",
__func__, actual_length, length);
- goto err;
+ return;
}
dev_info(&urb->dev->dev, "%s - actual: %d\n", __func__, actual_length);
length = actual_length;
out:
tty_insert_flip_string(&port->port, data, length);
- tty_flip_buffer_push(tty);
-err:
- tty_kref_put(tty);
+ tty_flip_buffer_push(&port->port);
}
static int safe_prepare_write_buffer(struct usb_serial_port *port,
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 64e53fda149b..70aee8d59f23 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -569,7 +569,6 @@ static void sierra_indat_callback(struct urb *urb)
int err;
int endpoint;
struct usb_serial_port *port;
- struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
int status = urb->status;
@@ -581,16 +580,12 @@ static void sierra_indat_callback(struct urb *urb)
" endpoint %02x\n", __func__, status, endpoint);
} else {
if (urb->actual_length) {
- tty = tty_port_tty_get(&port->port);
- if (tty) {
- tty_insert_flip_string(&port->port, data,
- urb->actual_length);
- tty_flip_buffer_push(tty);
-
- tty_kref_put(tty);
- usb_serial_debug_data(&port->dev, __func__,
- urb->actual_length, data);
- }
+ tty_insert_flip_string(&port->port, data,
+ urb->actual_length);
+ tty_flip_buffer_push(&port->port);
+
+ usb_serial_debug_data(&port->dev, __func__,
+ urb->actual_length, data);
} else {
dev_dbg(&port->dev, "%s: empty read urb"
" received\n", __func__);
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 04e373152724..91ff8e3bddbd 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -462,7 +462,6 @@ static void spcp8x5_process_read_urb(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct spcp8x5_private *priv = usb_get_serial_port_data(port);
- struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
unsigned long flags;
u8 status;
@@ -481,9 +480,6 @@ static void spcp8x5_process_read_urb(struct urb *urb)
if (!urb->actual_length)
return;
- tty = tty_port_tty_get(&port->port);
- if (!tty)
- return;
if (status & UART_STATE_TRANSIENT_MASK) {
/* break takes precedence over parity, which takes precedence
@@ -500,15 +496,19 @@ static void spcp8x5_process_read_urb(struct urb *urb)
if (status & UART_OVERRUN_ERROR)
tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
- if (status & UART_DCD)
- usb_serial_handle_dcd_change(port, tty,
- priv->line_status & MSR_STATUS_LINE_DCD);
+ if (status & UART_DCD) {
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
+ if (tty) {
+ usb_serial_handle_dcd_change(port, tty,
+ priv->line_status & MSR_STATUS_LINE_DCD);
+ tty_kref_put(tty);
+ }
+ }
}
tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag,
urb->actual_length);
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
+ tty_flip_buffer_push(&port->port);
}
static int spcp8x5_wait_modem_info(struct usb_serial_port *port,
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index 38713156e957..58bc7e793524 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -582,7 +582,7 @@ static void ssu100_update_lsr(struct usb_serial_port *port, u8 lsr,
}
-static int ssu100_process_packet(struct urb *urb)
+static void ssu100_process_read_urb(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
char *packet = (char *)urb->transfer_buffer;
@@ -609,7 +609,7 @@ static int ssu100_process_packet(struct urb *urb)
ch = packet;
if (!len)
- return 0; /* status only */
+ return; /* status only */
if (port->port.console && port->sysrq) {
for (i = 0; i < len; i++, ch++) {
@@ -619,24 +619,7 @@ static int ssu100_process_packet(struct urb *urb)
} else
tty_insert_flip_string_fixed_flag(&port->port, ch, flag, len);
- return len;
-}
-
-static void ssu100_process_read_urb(struct urb *urb)
-{
- struct usb_serial_port *port = urb->context;
- struct tty_struct *tty;
- int count;
-
- tty = tty_port_tty_get(&port->port);
- if (!tty)
- return;
-
- count = ssu100_process_packet(urb);
-
- if (count)
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
+ tty_flip_buffer_push(&port->port);
}
static struct usb_serial_driver ssu100_device = {
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index 2ffa6ae3b5ed..be05e6caf9a3 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -48,7 +48,6 @@ static void symbol_int_callback(struct urb *urb)
unsigned char *data = urb->transfer_buffer;
struct usb_serial_port *port = priv->port;
int status = urb->status;
- struct tty_struct *tty;
int result;
int data_length;
@@ -82,13 +81,8 @@ static void symbol_int_callback(struct urb *urb)
* we pretty much just ignore the size and send everything
* else to the tty layer.
*/
- tty = tty_port_tty_get(&port->port);
- if (tty) {
- tty_insert_flip_string(&port->port, &data[1],
- data_length);
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
- }
+ tty_insert_flip_string(&port->port, &data[1], data_length);
+ tty_flip_buffer_push(&port->port);
} else {
dev_dbg(&priv->udev->dev,
"Improper amount of data received from the device, "
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 05077e3c7631..39cb9b807c3c 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -121,8 +121,8 @@ static void ti_interrupt_callback(struct urb *urb);
static void ti_bulk_in_callback(struct urb *urb);
static void ti_bulk_out_callback(struct urb *urb);
-static void ti_recv(struct usb_serial_port *port, struct tty_struct *tty,
- unsigned char *data, int length);
+static void ti_recv(struct usb_serial_port *port, unsigned char *data,
+ int length);
static void ti_send(struct ti_port *tport);
static int ti_set_mcr(struct ti_port *tport, unsigned int mcr);
static int ti_get_lsr(struct ti_port *tport);
@@ -1118,7 +1118,6 @@ static void ti_bulk_in_callback(struct urb *urb)
struct device *dev = &urb->dev->dev;
int status = urb->status;
int retval = 0;
- struct tty_struct *tty;
switch (status) {
case 0:
@@ -1145,23 +1144,18 @@ static void ti_bulk_in_callback(struct urb *urb)
return;
}
- tty = tty_port_tty_get(&port->port);
- if (tty) {
- if (urb->actual_length) {
- usb_serial_debug_data(dev, __func__, urb->actual_length,
- urb->transfer_buffer);
+ if (urb->actual_length) {
+ usb_serial_debug_data(dev, __func__, urb->actual_length,
+ urb->transfer_buffer);
- if (!tport->tp_is_open)
- dev_dbg(dev, "%s - port closed, dropping data\n",
- __func__);
- else
- ti_recv(port, tty, urb->transfer_buffer,
- urb->actual_length);
- spin_lock(&tport->tp_lock);
- tport->tp_icount.rx += urb->actual_length;
- spin_unlock(&tport->tp_lock);
- }
- tty_kref_put(tty);
+ if (!tport->tp_is_open)
+ dev_dbg(dev, "%s - port closed, dropping data\n",
+ __func__);
+ else
+ ti_recv(port, urb->transfer_buffer, urb->actual_length);
+ spin_lock(&tport->tp_lock);
+ tport->tp_icount.rx += urb->actual_length;
+ spin_unlock(&tport->tp_lock);
}
exit:
@@ -1209,8 +1203,8 @@ static void ti_bulk_out_callback(struct urb *urb)
}
-static void ti_recv(struct usb_serial_port *port, struct tty_struct *tty,
- unsigned char *data, int length)
+static void ti_recv(struct usb_serial_port *port, unsigned char *data,
+ int length)
{
int cnt;
@@ -1222,11 +1216,10 @@ static void ti_recv(struct usb_serial_port *port, struct tty_struct *tty,
if (cnt == 0)
break;
}
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->port);
data += cnt;
length -= cnt;
} while (length > 0);
-
}
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index 293b460030cb..a547c91e3c05 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -275,7 +275,6 @@ static void usb_wwan_indat_callback(struct urb *urb)
int err;
int endpoint;
struct usb_serial_port *port;
- struct tty_struct *tty;
struct device *dev;
unsigned char *data = urb->transfer_buffer;
int status = urb->status;
@@ -288,16 +287,12 @@ static void usb_wwan_indat_callback(struct urb *urb)
dev_dbg(dev, "%s: nonzero status: %d on endpoint %02x.\n",
__func__, status, endpoint);
} else {
- tty = tty_port_tty_get(&port->port);
- if (tty) {
- if (urb->actual_length) {
- tty_insert_flip_string(&port->port, data,
- urb->actual_length);
- tty_flip_buffer_push(tty);
- } else
- dev_dbg(dev, "%s: empty read urb received\n", __func__);
- tty_kref_put(tty);
- }
+ if (urb->actual_length) {
+ tty_insert_flip_string(&port->port, data,
+ urb->actual_length);
+ tty_flip_buffer_push(&port->port);
+ } else
+ dev_dbg(dev, "%s: empty read urb received\n", __func__);
/* Resubmit urb so we continue receiving */
err = usb_submit_urb(urb, GFP_ATOMIC);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index f16a47a13a09..f89acd1ed6d3 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -387,7 +387,6 @@ extern void do_SAK(struct tty_struct *tty);
extern void __do_SAK(struct tty_struct *tty);
extern void disassociate_ctty(int priv);
extern void no_tty(void);
-extern void tty_flip_buffer_push(struct tty_struct *tty);
extern void tty_flush_to_ldisc(struct tty_struct *tty);
extern void tty_buffer_free_all(struct tty_port *port);
extern void tty_buffer_flush(struct tty_struct *tty);
diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h
index 5cb694aba322..c5572807633a 100644
--- a/include/linux/tty_flip.h
+++ b/include/linux/tty_flip.h
@@ -10,6 +10,7 @@ extern int tty_prepare_flip_string(struct tty_port *port,
unsigned char **chars, size_t size);
extern int tty_prepare_flip_string_flags(struct tty_port *port,
unsigned char **chars, char **flags, size_t size);
+extern void tty_flip_buffer_push(struct tty_port *port);
void tty_schedule_flip(struct tty_struct *tty);
static inline int tty_insert_flip_char(struct tty_port *port,
diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c
index cbec3b642871..b6e44ad6cca6 100644
--- a/net/bluetooth/rfcomm/tty.c
+++ b/net/bluetooth/rfcomm/tty.c
@@ -541,23 +541,21 @@ int rfcomm_dev_ioctl(struct sock *sk, unsigned int cmd, void __user *arg)
static void rfcomm_dev_data_ready(struct rfcomm_dlc *dlc, struct sk_buff *skb)
{
struct rfcomm_dev *dev = dlc->owner;
- struct tty_struct *tty;
if (!dev) {
kfree_skb(skb);
return;
}
- tty = dev->port.tty;
- if (!tty || !skb_queue_empty(&dev->pending)) {
+ if (!skb_queue_empty(&dev->pending)) {
skb_queue_tail(&dev->pending, skb);
return;
}
- BT_DBG("dlc %p tty %p len %d", dlc, tty, skb->len);
+ BT_DBG("dlc %p len %d", dlc, skb->len);
tty_insert_flip_string(&dev->port, skb->data, skb->len);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&dev->port);
kfree_skb(skb);
}
@@ -621,14 +619,10 @@ static void rfcomm_dev_modem_status(struct rfcomm_dlc *dlc, u8 v24_sig)
/* ---- TTY functions ---- */
static void rfcomm_tty_copy_pending(struct rfcomm_dev *dev)
{
- struct tty_struct *tty = dev->port.tty;
struct sk_buff *skb;
int inserted = 0;
- if (!tty)
- return;
-
- BT_DBG("dev %p tty %p", dev, tty);
+ BT_DBG("dev %p", dev);
rfcomm_dlc_lock(dev->dlc);
@@ -641,7 +635,7 @@ static void rfcomm_tty_copy_pending(struct rfcomm_dev *dev)
rfcomm_dlc_unlock(dev->dlc);
if (inserted > 0)
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&dev->port);
}
static int rfcomm_tty_open(struct tty_struct *tty, struct file *filp)
diff --git a/net/irda/ircomm/ircomm_tty.c b/net/irda/ircomm/ircomm_tty.c
index 2491f6f53871..9a5fd3c3e530 100644
--- a/net/irda/ircomm/ircomm_tty.c
+++ b/net/irda/ircomm/ircomm_tty.c
@@ -1136,14 +1136,14 @@ static int ircomm_tty_data_indication(void *instance, void *sap,
ircomm_tty_send_initial_parameters(self);
ircomm_tty_link_established(self);
}
+ tty_kref_put(tty);
/*
* Use flip buffer functions since the code may be called from interrupt
* context
*/
tty_insert_flip_string(&self->port, skb->data, skb->len);
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
+ tty_flip_buffer_push(&self->port);
/* No need to kfree_skb - see ircomm_ttp_data_indication() */