pinctrl: add pinctrl-mxs support

Add pinctrl support for Freescale MXS SoCs, i.MX23 and i.MX28.
The driver supports device tree probe only.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

7 files changed, 2261 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt
new file mode 100644
index 000000000000..f7e8e8f4d9a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt
@@ -0,0 +1,918 @@
+* Freescale MXS Pin Controller
+
+The pins controlled by mxs pin controller are organized in banks, each bank
+has 32 pins.  Each pin has 4 multiplexing functions, and generally, the 4th
+function is GPIO.  The configuration on the pins includes drive strength,
+voltage and pull-up.
+
+Required properties:
+- compatible: "fsl,imx23-pinctrl" or "fsl,imx28-pinctrl"
+- reg: Should contain the register physical address and length for the
+  pin controller.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices.
+
+The node of mxs pin controller acts as a container for an arbitrary number of
+subnodes.  Each of these subnodes represents some desired configuration for
+a group of pins, and only affects those parameters that are explicitly listed.
+In other words, a subnode that describes a drive strength parameter implies no
+information about pull-up. For this reason, even seemingly boolean values are
+actually tristates in this binding: unspecified, off, or on. Unspecified is
+represented as an absent property, and off/on are represented as integer
+values 0 and 1.
+
+Those subnodes under mxs pin controller node will fall into two categories.
+One is to set up a group of pins for a function, both mux selection and pin
+configurations, and it's called group node in the binding document.   The other
+one is to adjust the pin configuration for some particular pins that need a
+different configuration than what is defined in group node.  The binding
+document calls this type of node config node.
+
+On mxs, there is no hardware pin group. The pin group in this binding only
+means a group of pins put together for particular peripheral to work in
+particular function, like SSP0 functioning as mmc0-8bit.  That said, the
+group node should include all the pins needed for one function rather than
+having these pins defined in several group nodes.  It also means each of
+"pinctrl-*" phandle in client device node should only have one group node
+pointed in there, while the phandle can have multiple config node referenced
+there to adjust configurations for some pins in the group.
+
+Required subnode-properties:
+- fsl,pinmux-ids: An integer array.  Each integer in the array specify a pin
+  with given mux function, with bank, pin and mux packed as below.
+
+    [15..12] : bank number
+    [11..4]  : pin number
+    [3..0]   : mux selection
+
+  This integer with mux selection packed is used as an entity by both group
+  and config nodes to identify a pin.  The mux selection in the integer takes
+  effects only on group node, and will get ignored by driver with config node,
+  since config node is only meant to set up pin configurations.
+
+  Valid values for these integers are listed below.
+
+- reg: Should be the index of the group nodes for same function.  This property
+  is required only for group nodes, and should not be present in any config
+  nodes.
+
+Optional subnode-properties:
+- fsl,drive-strength: Integer.
+    0: 4 mA
+    1: 8 mA
+    2: 12 mA
+    3: 16 mA
+- fsl,voltage: Integer.
+    0: 1.8 V
+    1: 3.3 V
+- fsl,pull-up: Integer.
+    0: Disable the internal pull-up
+    1: Enable the internal pull-up
+
+Examples:
+
+pinctrl@80018000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-pinctrl";
+	reg = <0x80018000 2000>;
+
+	mmc0_8bit_pins_a: mmc0-8bit@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			0x2000 0x2010 0x2020 0x2030
+			0x2040 0x2050 0x2060 0x2070
+			0x2080 0x2090 0x20a0>;
+		fsl,drive-strength = <1>;
+		fsl,voltage = <1>;
+		fsl,pull-up = <1>;
+	};
+
+	mmc_cd_cfg: mmc-cd-cfg {
+		fsl,pinmux-ids = <0x2090>;
+		fsl,pull-up = <0>;
+	};
+
+	mmc_sck_cfg: mmc-sck-cfg {
+		fsl,pinmux-ids = <0x20a0>;
+		fsl,drive-strength = <2>;
+		fsl,pull-up = <0>;
+	};
+};
+
+In this example, group node mmc0-8bit defines a group of pins for mxs SSP0
+to function as a 8-bit mmc device, with 8mA, 3.3V and pull-up configurations
+applied on all these pins.  And config nodes mmc-cd-cfg and mmc-sck-cfg are
+adjusting the configuration for pins card-detection and clock from what group
+node mmc0-8bit defines.  Only the configuration properties to be adjusted need
+to be listed in the config nodes.
+
+Valid values for i.MX28 pinmux-id:
+
+pinmux						id
+------						--
+MX28_PAD_GPMI_D00__GPMI_D0			0x0000
+MX28_PAD_GPMI_D01__GPMI_D1			0x0010
+MX28_PAD_GPMI_D02__GPMI_D2			0x0020
+MX28_PAD_GPMI_D03__GPMI_D3			0x0030
+MX28_PAD_GPMI_D04__GPMI_D4			0x0040
+MX28_PAD_GPMI_D05__GPMI_D5			0x0050
+MX28_PAD_GPMI_D06__GPMI_D6			0x0060
+MX28_PAD_GPMI_D07__GPMI_D7			0x0070
+MX28_PAD_GPMI_CE0N__GPMI_CE0N			0x0100
+MX28_PAD_GPMI_CE1N__GPMI_CE1N			0x0110
+MX28_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
+MX28_PAD_GPMI_CE3N__GPMI_CE3N			0x0130
+MX28_PAD_GPMI_RDY0__GPMI_READY0			0x0140
+MX28_PAD_GPMI_RDY1__GPMI_READY1			0x0150
+MX28_PAD_GPMI_RDY2__GPMI_READY2			0x0160
+MX28_PAD_GPMI_RDY3__GPMI_READY3			0x0170
+MX28_PAD_GPMI_RDN__GPMI_RDN			0x0180
+MX28_PAD_GPMI_WRN__GPMI_WRN			0x0190
+MX28_PAD_GPMI_ALE__GPMI_ALE			0x01a0
+MX28_PAD_GPMI_CLE__GPMI_CLE			0x01b0
+MX28_PAD_GPMI_RESETN__GPMI_RESETN		0x01c0
+MX28_PAD_LCD_D00__LCD_D0			0x1000
+MX28_PAD_LCD_D01__LCD_D1			0x1010
+MX28_PAD_LCD_D02__LCD_D2			0x1020
+MX28_PAD_LCD_D03__LCD_D3			0x1030
+MX28_PAD_LCD_D04__LCD_D4			0x1040
+MX28_PAD_LCD_D05__LCD_D5			0x1050
+MX28_PAD_LCD_D06__LCD_D6			0x1060
+MX28_PAD_LCD_D07__LCD_D7			0x1070
+MX28_PAD_LCD_D08__LCD_D8			0x1080
+MX28_PAD_LCD_D09__LCD_D9			0x1090
+MX28_PAD_LCD_D10__LCD_D10			0x10a0
+MX28_PAD_LCD_D11__LCD_D11			0x10b0
+MX28_PAD_LCD_D12__LCD_D12			0x10c0
+MX28_PAD_LCD_D13__LCD_D13			0x10d0
+MX28_PAD_LCD_D14__LCD_D14			0x10e0
+MX28_PAD_LCD_D15__LCD_D15			0x10f0
+MX28_PAD_LCD_D16__LCD_D16			0x1100
+MX28_PAD_LCD_D17__LCD_D17			0x1110
+MX28_PAD_LCD_D18__LCD_D18			0x1120
+MX28_PAD_LCD_D19__LCD_D19			0x1130
+MX28_PAD_LCD_D20__LCD_D20			0x1140
+MX28_PAD_LCD_D21__LCD_D21			0x1150
+MX28_PAD_LCD_D22__LCD_D22			0x1160
+MX28_PAD_LCD_D23__LCD_D23			0x1170
+MX28_PAD_LCD_RD_E__LCD_RD_E			0x1180
+MX28_PAD_LCD_WR_RWN__LCD_WR_RWN			0x1190
+MX28_PAD_LCD_RS__LCD_RS				0x11a0
+MX28_PAD_LCD_CS__LCD_CS				0x11b0
+MX28_PAD_LCD_VSYNC__LCD_VSYNC			0x11c0
+MX28_PAD_LCD_HSYNC__LCD_HSYNC			0x11d0
+MX28_PAD_LCD_DOTCLK__LCD_DOTCLK			0x11e0
+MX28_PAD_LCD_ENABLE__LCD_ENABLE			0x11f0
+MX28_PAD_SSP0_DATA0__SSP0_D0			0x2000
+MX28_PAD_SSP0_DATA1__SSP0_D1			0x2010
+MX28_PAD_SSP0_DATA2__SSP0_D2			0x2020
+MX28_PAD_SSP0_DATA3__SSP0_D3			0x2030
+MX28_PAD_SSP0_DATA4__SSP0_D4			0x2040
+MX28_PAD_SSP0_DATA5__SSP0_D5			0x2050
+MX28_PAD_SSP0_DATA6__SSP0_D6			0x2060
+MX28_PAD_SSP0_DATA7__SSP0_D7			0x2070
+MX28_PAD_SSP0_CMD__SSP0_CMD			0x2080
+MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT		0x2090
+MX28_PAD_SSP0_SCK__SSP0_SCK			0x20a0
+MX28_PAD_SSP1_SCK__SSP1_SCK			0x20c0
+MX28_PAD_SSP1_CMD__SSP1_CMD			0x20d0
+MX28_PAD_SSP1_DATA0__SSP1_D0			0x20e0
+MX28_PAD_SSP1_DATA3__SSP1_D3			0x20f0
+MX28_PAD_SSP2_SCK__SSP2_SCK			0x2100
+MX28_PAD_SSP2_MOSI__SSP2_CMD			0x2110
+MX28_PAD_SSP2_MISO__SSP2_D0			0x2120
+MX28_PAD_SSP2_SS0__SSP2_D3			0x2130
+MX28_PAD_SSP2_SS1__SSP2_D4			0x2140
+MX28_PAD_SSP2_SS2__SSP2_D5			0x2150
+MX28_PAD_SSP3_SCK__SSP3_SCK			0x2180
+MX28_PAD_SSP3_MOSI__SSP3_CMD			0x2190
+MX28_PAD_SSP3_MISO__SSP3_D0			0x21a0
+MX28_PAD_SSP3_SS0__SSP3_D3			0x21b0
+MX28_PAD_AUART0_RX__AUART0_RX			0x3000
+MX28_PAD_AUART0_TX__AUART0_TX			0x3010
+MX28_PAD_AUART0_CTS__AUART0_CTS			0x3020
+MX28_PAD_AUART0_RTS__AUART0_RTS			0x3030
+MX28_PAD_AUART1_RX__AUART1_RX			0x3040
+MX28_PAD_AUART1_TX__AUART1_TX			0x3050
+MX28_PAD_AUART1_CTS__AUART1_CTS			0x3060
+MX28_PAD_AUART1_RTS__AUART1_RTS			0x3070
+MX28_PAD_AUART2_RX__AUART2_RX			0x3080
+MX28_PAD_AUART2_TX__AUART2_TX			0x3090
+MX28_PAD_AUART2_CTS__AUART2_CTS			0x30a0
+MX28_PAD_AUART2_RTS__AUART2_RTS			0x30b0
+MX28_PAD_AUART3_RX__AUART3_RX			0x30c0
+MX28_PAD_AUART3_TX__AUART3_TX			0x30d0
+MX28_PAD_AUART3_CTS__AUART3_CTS			0x30e0
+MX28_PAD_AUART3_RTS__AUART3_RTS			0x30f0
+MX28_PAD_PWM0__PWM_0				0x3100
+MX28_PAD_PWM1__PWM_1				0x3110
+MX28_PAD_PWM2__PWM_2				0x3120
+MX28_PAD_SAIF0_MCLK__SAIF0_MCLK			0x3140
+MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK		0x3150
+MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK		0x3160
+MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0		0x3170
+MX28_PAD_I2C0_SCL__I2C0_SCL			0x3180
+MX28_PAD_I2C0_SDA__I2C0_SDA			0x3190
+MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0		0x31a0
+MX28_PAD_SPDIF__SPDIF_TX			0x31b0
+MX28_PAD_PWM3__PWM_3				0x31c0
+MX28_PAD_PWM4__PWM_4				0x31d0
+MX28_PAD_LCD_RESET__LCD_RESET			0x31e0
+MX28_PAD_ENET0_MDC__ENET0_MDC			0x4000
+MX28_PAD_ENET0_MDIO__ENET0_MDIO			0x4010
+MX28_PAD_ENET0_RX_EN__ENET0_RX_EN		0x4020
+MX28_PAD_ENET0_RXD0__ENET0_RXD0			0x4030
+MX28_PAD_ENET0_RXD1__ENET0_RXD1			0x4040
+MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK		0x4050
+MX28_PAD_ENET0_TX_EN__ENET0_TX_EN		0x4060
+MX28_PAD_ENET0_TXD0__ENET0_TXD0			0x4070
+MX28_PAD_ENET0_TXD1__ENET0_TXD1			0x4080
+MX28_PAD_ENET0_RXD2__ENET0_RXD2			0x4090
+MX28_PAD_ENET0_RXD3__ENET0_RXD3			0x40a0
+MX28_PAD_ENET0_TXD2__ENET0_TXD2			0x40b0
+MX28_PAD_ENET0_TXD3__ENET0_TXD3			0x40c0
+MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK		0x40d0
+MX28_PAD_ENET0_COL__ENET0_COL			0x40e0
+MX28_PAD_ENET0_CRS__ENET0_CRS			0x40f0
+MX28_PAD_ENET_CLK__CLKCTRL_ENET			0x4100
+MX28_PAD_JTAG_RTCK__JTAG_RTCK			0x4140
+MX28_PAD_EMI_D00__EMI_DATA0			0x5000
+MX28_PAD_EMI_D01__EMI_DATA1			0x5010
+MX28_PAD_EMI_D02__EMI_DATA2			0x5020
+MX28_PAD_EMI_D03__EMI_DATA3			0x5030
+MX28_PAD_EMI_D04__EMI_DATA4			0x5040
+MX28_PAD_EMI_D05__EMI_DATA5			0x5050
+MX28_PAD_EMI_D06__EMI_DATA6			0x5060
+MX28_PAD_EMI_D07__EMI_DATA7			0x5070
+MX28_PAD_EMI_D08__EMI_DATA8			0x5080
+MX28_PAD_EMI_D09__EMI_DATA9			0x5090
+MX28_PAD_EMI_D10__EMI_DATA10			0x50a0
+MX28_PAD_EMI_D11__EMI_DATA11			0x50b0
+MX28_PAD_EMI_D12__EMI_DATA12			0x50c0
+MX28_PAD_EMI_D13__EMI_DATA13			0x50d0
+MX28_PAD_EMI_D14__EMI_DATA14			0x50e0
+MX28_PAD_EMI_D15__EMI_DATA15			0x50f0
+MX28_PAD_EMI_ODT0__EMI_ODT0			0x5100
+MX28_PAD_EMI_DQM0__EMI_DQM0			0x5110
+MX28_PAD_EMI_ODT1__EMI_ODT1			0x5120
+MX28_PAD_EMI_DQM1__EMI_DQM1			0x5130
+MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK	0x5140
+MX28_PAD_EMI_CLK__EMI_CLK			0x5150
+MX28_PAD_EMI_DQS0__EMI_DQS0			0x5160
+MX28_PAD_EMI_DQS1__EMI_DQS1			0x5170
+MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN		0x51a0
+MX28_PAD_EMI_A00__EMI_ADDR0			0x6000
+MX28_PAD_EMI_A01__EMI_ADDR1			0x6010
+MX28_PAD_EMI_A02__EMI_ADDR2			0x6020
+MX28_PAD_EMI_A03__EMI_ADDR3			0x6030
+MX28_PAD_EMI_A04__EMI_ADDR4			0x6040
+MX28_PAD_EMI_A05__EMI_ADDR5			0x6050
+MX28_PAD_EMI_A06__EMI_ADDR6			0x6060
+MX28_PAD_EMI_A07__EMI_ADDR7			0x6070
+MX28_PAD_EMI_A08__EMI_ADDR8			0x6080
+MX28_PAD_EMI_A09__EMI_ADDR9			0x6090
+MX28_PAD_EMI_A10__EMI_ADDR10			0x60a0
+MX28_PAD_EMI_A11__EMI_ADDR11			0x60b0
+MX28_PAD_EMI_A12__EMI_ADDR12			0x60c0
+MX28_PAD_EMI_A13__EMI_ADDR13			0x60d0
+MX28_PAD_EMI_A14__EMI_ADDR14			0x60e0
+MX28_PAD_EMI_BA0__EMI_BA0			0x6100
+MX28_PAD_EMI_BA1__EMI_BA1			0x6110
+MX28_PAD_EMI_BA2__EMI_BA2			0x6120
+MX28_PAD_EMI_CASN__EMI_CASN			0x6130
+MX28_PAD_EMI_RASN__EMI_RASN			0x6140
+MX28_PAD_EMI_WEN__EMI_WEN			0x6150
+MX28_PAD_EMI_CE0N__EMI_CE0N			0x6160
+MX28_PAD_EMI_CE1N__EMI_CE1N			0x6170
+MX28_PAD_EMI_CKE__EMI_CKE			0x6180
+MX28_PAD_GPMI_D00__SSP1_D0			0x0001
+MX28_PAD_GPMI_D01__SSP1_D1			0x0011
+MX28_PAD_GPMI_D02__SSP1_D2			0x0021
+MX28_PAD_GPMI_D03__SSP1_D3			0x0031
+MX28_PAD_GPMI_D04__SSP1_D4			0x0041
+MX28_PAD_GPMI_D05__SSP1_D5			0x0051
+MX28_PAD_GPMI_D06__SSP1_D6			0x0061
+MX28_PAD_GPMI_D07__SSP1_D7			0x0071
+MX28_PAD_GPMI_CE0N__SSP3_D0			0x0101
+MX28_PAD_GPMI_CE1N__SSP3_D3			0x0111
+MX28_PAD_GPMI_CE2N__CAN1_TX			0x0121
+MX28_PAD_GPMI_CE3N__CAN1_RX			0x0131
+MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT		0x0141
+MX28_PAD_GPMI_RDY1__SSP1_CMD			0x0151
+MX28_PAD_GPMI_RDY2__CAN0_TX			0x0161
+MX28_PAD_GPMI_RDY3__CAN0_RX			0x0171
+MX28_PAD_GPMI_RDN__SSP3_SCK			0x0181
+MX28_PAD_GPMI_WRN__SSP1_SCK			0x0191
+MX28_PAD_GPMI_ALE__SSP3_D1			0x01a1
+MX28_PAD_GPMI_CLE__SSP3_D2			0x01b1
+MX28_PAD_GPMI_RESETN__SSP3_CMD			0x01c1
+MX28_PAD_LCD_D03__ETM_DA8			0x1031
+MX28_PAD_LCD_D04__ETM_DA9			0x1041
+MX28_PAD_LCD_D08__ETM_DA3			0x1081
+MX28_PAD_LCD_D09__ETM_DA4			0x1091
+MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT		0x1141
+MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN		0x1151
+MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT		0x1161
+MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN		0x1171
+MX28_PAD_LCD_RD_E__LCD_VSYNC			0x1181
+MX28_PAD_LCD_WR_RWN__LCD_HSYNC			0x1191
+MX28_PAD_LCD_RS__LCD_DOTCLK			0x11a1
+MX28_PAD_LCD_CS__LCD_ENABLE			0x11b1
+MX28_PAD_LCD_VSYNC__SAIF1_SDATA0		0x11c1
+MX28_PAD_LCD_HSYNC__SAIF1_SDATA1		0x11d1
+MX28_PAD_LCD_DOTCLK__SAIF1_MCLK			0x11e1
+MX28_PAD_SSP0_DATA4__SSP2_D0			0x2041
+MX28_PAD_SSP0_DATA5__SSP2_D3			0x2051
+MX28_PAD_SSP0_DATA6__SSP2_CMD			0x2061
+MX28_PAD_SSP0_DATA7__SSP2_SCK			0x2071
+MX28_PAD_SSP1_SCK__SSP2_D1			0x20c1
+MX28_PAD_SSP1_CMD__SSP2_D2			0x20d1
+MX28_PAD_SSP1_DATA0__SSP2_D6			0x20e1
+MX28_PAD_SSP1_DATA3__SSP2_D7			0x20f1
+MX28_PAD_SSP2_SCK__AUART2_RX			0x2101
+MX28_PAD_SSP2_MOSI__AUART2_TX			0x2111
+MX28_PAD_SSP2_MISO__AUART3_RX			0x2121
+MX28_PAD_SSP2_SS0__AUART3_TX			0x2131
+MX28_PAD_SSP2_SS1__SSP2_D1			0x2141
+MX28_PAD_SSP2_SS2__SSP2_D2			0x2151
+MX28_PAD_SSP3_SCK__AUART4_TX			0x2181
+MX28_PAD_SSP3_MOSI__AUART4_RX			0x2191
+MX28_PAD_SSP3_MISO__AUART4_RTS			0x21a1
+MX28_PAD_SSP3_SS0__AUART4_CTS			0x21b1
+MX28_PAD_AUART0_RX__I2C0_SCL			0x3001
+MX28_PAD_AUART0_TX__I2C0_SDA			0x3011
+MX28_PAD_AUART0_CTS__AUART4_RX			0x3021
+MX28_PAD_AUART0_RTS__AUART4_TX			0x3031
+MX28_PAD_AUART1_RX__SSP2_CARD_DETECT		0x3041
+MX28_PAD_AUART1_TX__SSP3_CARD_DETECT		0x3051
+MX28_PAD_AUART1_CTS__USB0_OVERCURRENT		0x3061
+MX28_PAD_AUART1_RTS__USB0_ID			0x3071
+MX28_PAD_AUART2_RX__SSP3_D1			0x3081
+MX28_PAD_AUART2_TX__SSP3_D2			0x3091
+MX28_PAD_AUART2_CTS__I2C1_SCL			0x30a1
+MX28_PAD_AUART2_RTS__I2C1_SDA			0x30b1
+MX28_PAD_AUART3_RX__CAN0_TX			0x30c1
+MX28_PAD_AUART3_TX__CAN0_RX			0x30d1
+MX28_PAD_AUART3_CTS__CAN1_TX			0x30e1
+MX28_PAD_AUART3_RTS__CAN1_RX			0x30f1
+MX28_PAD_PWM0__I2C1_SCL				0x3101
+MX28_PAD_PWM1__I2C1_SDA				0x3111
+MX28_PAD_PWM2__USB0_ID				0x3121
+MX28_PAD_SAIF0_MCLK__PWM_3			0x3141
+MX28_PAD_SAIF0_LRCLK__PWM_4			0x3151
+MX28_PAD_SAIF0_BITCLK__PWM_5			0x3161
+MX28_PAD_SAIF0_SDATA0__PWM_6			0x3171
+MX28_PAD_I2C0_SCL__TIMROT_ROTARYA		0x3181
+MX28_PAD_I2C0_SDA__TIMROT_ROTARYB		0x3191
+MX28_PAD_SAIF1_SDATA0__PWM_7			0x31a1
+MX28_PAD_LCD_RESET__LCD_VSYNC			0x31e1
+MX28_PAD_ENET0_MDC__GPMI_CE4N			0x4001
+MX28_PAD_ENET0_MDIO__GPMI_CE5N			0x4011
+MX28_PAD_ENET0_RX_EN__GPMI_CE6N			0x4021
+MX28_PAD_ENET0_RXD0__GPMI_CE7N			0x4031
+MX28_PAD_ENET0_RXD1__GPMI_READY4		0x4041
+MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER		0x4051
+MX28_PAD_ENET0_TX_EN__GPMI_READY5		0x4061
+MX28_PAD_ENET0_TXD0__GPMI_READY6		0x4071
+MX28_PAD_ENET0_TXD1__GPMI_READY7		0x4081
+MX28_PAD_ENET0_RXD2__ENET1_RXD0			0x4091
+MX28_PAD_ENET0_RXD3__ENET1_RXD1			0x40a1
+MX28_PAD_ENET0_TXD2__ENET1_TXD0			0x40b1
+MX28_PAD_ENET0_TXD3__ENET1_TXD1			0x40c1
+MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER		0x40d1
+MX28_PAD_ENET0_COL__ENET1_TX_EN			0x40e1
+MX28_PAD_ENET0_CRS__ENET1_RX_EN			0x40f1
+MX28_PAD_GPMI_CE2N__ENET0_RX_ER			0x0122
+MX28_PAD_GPMI_CE3N__SAIF1_MCLK			0x0132
+MX28_PAD_GPMI_RDY0__USB0_ID			0x0142
+MX28_PAD_GPMI_RDY2__ENET0_TX_ER			0x0162
+MX28_PAD_GPMI_RDY3__HSADC_TRIGGER		0x0172
+MX28_PAD_GPMI_ALE__SSP3_D4			0x01a2
+MX28_PAD_GPMI_CLE__SSP3_D5			0x01b2
+MX28_PAD_LCD_D00__ETM_DA0			0x1002
+MX28_PAD_LCD_D01__ETM_DA1			0x1012
+MX28_PAD_LCD_D02__ETM_DA2			0x1022
+MX28_PAD_LCD_D03__ETM_DA3			0x1032
+MX28_PAD_LCD_D04__ETM_DA4			0x1042
+MX28_PAD_LCD_D05__ETM_DA5			0x1052
+MX28_PAD_LCD_D06__ETM_DA6			0x1062
+MX28_PAD_LCD_D07__ETM_DA7			0x1072
+MX28_PAD_LCD_D08__ETM_DA8			0x1082
+MX28_PAD_LCD_D09__ETM_DA9			0x1092
+MX28_PAD_LCD_D10__ETM_DA10			0x10a2
+MX28_PAD_LCD_D11__ETM_DA11			0x10b2
+MX28_PAD_LCD_D12__ETM_DA12			0x10c2
+MX28_PAD_LCD_D13__ETM_DA13			0x10d2
+MX28_PAD_LCD_D14__ETM_DA14			0x10e2
+MX28_PAD_LCD_D15__ETM_DA15			0x10f2
+MX28_PAD_LCD_D16__ETM_DA7			0x1102
+MX28_PAD_LCD_D17__ETM_DA6			0x1112
+MX28_PAD_LCD_D18__ETM_DA5			0x1122
+MX28_PAD_LCD_D19__ETM_DA4			0x1132
+MX28_PAD_LCD_D20__ETM_DA3			0x1142
+MX28_PAD_LCD_D21__ETM_DA2			0x1152
+MX28_PAD_LCD_D22__ETM_DA1			0x1162
+MX28_PAD_LCD_D23__ETM_DA0			0x1172
+MX28_PAD_LCD_RD_E__ETM_TCTL			0x1182
+MX28_PAD_LCD_WR_RWN__ETM_TCLK			0x1192
+MX28_PAD_LCD_HSYNC__ETM_TCTL			0x11d2
+MX28_PAD_LCD_DOTCLK__ETM_TCLK			0x11e2
+MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT	0x20c2
+MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN		0x20d2
+MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT	0x20e2
+MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN	0x20f2
+MX28_PAD_SSP2_SCK__SAIF0_SDATA1			0x2102
+MX28_PAD_SSP2_MOSI__SAIF0_SDATA2		0x2112
+MX28_PAD_SSP2_MISO__SAIF1_SDATA1		0x2122
+MX28_PAD_SSP2_SS0__SAIF1_SDATA2			0x2132
+MX28_PAD_SSP2_SS1__USB1_OVERCURRENT		0x2142
+MX28_PAD_SSP2_SS2__USB0_OVERCURRENT		0x2152
+MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT	0x2182
+MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN	0x2192
+MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT	0x21a2
+MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN		0x21b2
+MX28_PAD_AUART0_RX__DUART_CTS			0x3002
+MX28_PAD_AUART0_TX__DUART_RTS			0x3012
+MX28_PAD_AUART0_CTS__DUART_RX			0x3022
+MX28_PAD_AUART0_RTS__DUART_TX			0x3032
+MX28_PAD_AUART1_RX__PWM_0			0x3042
+MX28_PAD_AUART1_TX__PWM_1			0x3052
+MX28_PAD_AUART1_CTS__TIMROT_ROTARYA		0x3062
+MX28_PAD_AUART1_RTS__TIMROT_ROTARYB		0x3072
+MX28_PAD_AUART2_RX__SSP3_D4			0x3082
+MX28_PAD_AUART2_TX__SSP3_D5			0x3092
+MX28_PAD_AUART2_CTS__SAIF1_BITCLK		0x30a2
+MX28_PAD_AUART2_RTS__SAIF1_LRCLK		0x30b2
+MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT	0x30c2
+MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN	0x30d2
+MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT	0x30e2
+MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN	0x30f2
+MX28_PAD_PWM0__DUART_RX				0x3102
+MX28_PAD_PWM1__DUART_TX				0x3112
+MX28_PAD_PWM2__USB1_OVERCURRENT			0x3122
+MX28_PAD_SAIF0_MCLK__AUART4_CTS			0x3142
+MX28_PAD_SAIF0_LRCLK__AUART4_RTS		0x3152
+MX28_PAD_SAIF0_BITCLK__AUART4_RX		0x3162
+MX28_PAD_SAIF0_SDATA0__AUART4_TX		0x3172
+MX28_PAD_I2C0_SCL__DUART_RX			0x3182
+MX28_PAD_I2C0_SDA__DUART_TX			0x3192
+MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1		0x31a2
+MX28_PAD_SPDIF__ENET1_RX_ER			0x31b2
+MX28_PAD_ENET0_MDC__SAIF0_SDATA1		0x4002
+MX28_PAD_ENET0_MDIO__SAIF0_SDATA2		0x4012
+MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1		0x4022
+MX28_PAD_ENET0_RXD0__SAIF1_SDATA2		0x4032
+MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT	0x4052
+MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT	0x4092
+MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN	0x40a2
+MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT	0x40b2
+MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN	0x40c2
+MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN	0x40d2
+MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT	0x40e2
+MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN	0x40f2
+MX28_PAD_GPMI_D00__GPIO_0_0			0x0003
+MX28_PAD_GPMI_D01__GPIO_0_1			0x0013
+MX28_PAD_GPMI_D02__GPIO_0_2			0x0023
+MX28_PAD_GPMI_D03__GPIO_0_3			0x0033
+MX28_PAD_GPMI_D04__GPIO_0_4			0x0043
+MX28_PAD_GPMI_D05__GPIO_0_5			0x0053
+MX28_PAD_GPMI_D06__GPIO_0_6			0x0063
+MX28_PAD_GPMI_D07__GPIO_0_7			0x0073
+MX28_PAD_GPMI_CE0N__GPIO_0_16			0x0103
+MX28_PAD_GPMI_CE1N__GPIO_0_17			0x0113
+MX28_PAD_GPMI_CE2N__GPIO_0_18			0x0123
+MX28_PAD_GPMI_CE3N__GPIO_0_19			0x0133
+MX28_PAD_GPMI_RDY0__GPIO_0_20			0x0143
+MX28_PAD_GPMI_RDY1__GPIO_0_21			0x0153
+MX28_PAD_GPMI_RDY2__GPIO_0_22			0x0163
+MX28_PAD_GPMI_RDY3__GPIO_0_23			0x0173
+MX28_PAD_GPMI_RDN__GPIO_0_24			0x0183
+MX28_PAD_GPMI_WRN__GPIO_0_25			0x0193
+MX28_PAD_GPMI_ALE__GPIO_0_26			0x01a3
+MX28_PAD_GPMI_CLE__GPIO_0_27			0x01b3
+MX28_PAD_GPMI_RESETN__GPIO_0_28			0x01c3
+MX28_PAD_LCD_D00__GPIO_1_0			0x1003
+MX28_PAD_LCD_D01__GPIO_1_1			0x1013
+MX28_PAD_LCD_D02__GPIO_1_2			0x1023
+MX28_PAD_LCD_D03__GPIO_1_3			0x1033
+MX28_PAD_LCD_D04__GPIO_1_4			0x1043
+MX28_PAD_LCD_D05__GPIO_1_5			0x1053
+MX28_PAD_LCD_D06__GPIO_1_6			0x1063
+MX28_PAD_LCD_D07__GPIO_1_7			0x1073
+MX28_PAD_LCD_D08__GPIO_1_8			0x1083
+MX28_PAD_LCD_D09__GPIO_1_9			0x1093
+MX28_PAD_LCD_D10__GPIO_1_10			0x10a3
+MX28_PAD_LCD_D11__GPIO_1_11			0x10b3
+MX28_PAD_LCD_D12__GPIO_1_12			0x10c3
+MX28_PAD_LCD_D13__GPIO_1_13			0x10d3
+MX28_PAD_LCD_D14__GPIO_1_14			0x10e3
+MX28_PAD_LCD_D15__GPIO_1_15			0x10f3
+MX28_PAD_LCD_D16__GPIO_1_16			0x1103
+MX28_PAD_LCD_D17__GPIO_1_17			0x1113
+MX28_PAD_LCD_D18__GPIO_1_18			0x1123
+MX28_PAD_LCD_D19__GPIO_1_19			0x1133
+MX28_PAD_LCD_D20__GPIO_1_20			0x1143
+MX28_PAD_LCD_D21__GPIO_1_21			0x1153
+MX28_PAD_LCD_D22__GPIO_1_22			0x1163
+MX28_PAD_LCD_D23__GPIO_1_23			0x1173
+MX28_PAD_LCD_RD_E__GPIO_1_24			0x1183
+MX28_PAD_LCD_WR_RWN__GPIO_1_25			0x1193
+MX28_PAD_LCD_RS__GPIO_1_26			0x11a3
+MX28_PAD_LCD_CS__GPIO_1_27			0x11b3
+MX28_PAD_LCD_VSYNC__GPIO_1_28			0x11c3
+MX28_PAD_LCD_HSYNC__GPIO_1_29			0x11d3
+MX28_PAD_LCD_DOTCLK__GPIO_1_30			0x11e3
+MX28_PAD_LCD_ENABLE__GPIO_1_31			0x11f3
+MX28_PAD_SSP0_DATA0__GPIO_2_0			0x2003
+MX28_PAD_SSP0_DATA1__GPIO_2_1			0x2013
+MX28_PAD_SSP0_DATA2__GPIO_2_2			0x2023
+MX28_PAD_SSP0_DATA3__GPIO_2_3			0x2033
+MX28_PAD_SSP0_DATA4__GPIO_2_4			0x2043
+MX28_PAD_SSP0_DATA5__GPIO_2_5			0x2053
+MX28_PAD_SSP0_DATA6__GPIO_2_6			0x2063
+MX28_PAD_SSP0_DATA7__GPIO_2_7			0x2073
+MX28_PAD_SSP0_CMD__GPIO_2_8			0x2083
+MX28_PAD_SSP0_DETECT__GPIO_2_9			0x2093
+MX28_PAD_SSP0_SCK__GPIO_2_10			0x20a3
+MX28_PAD_SSP1_SCK__GPIO_2_12			0x20c3
+MX28_PAD_SSP1_CMD__GPIO_2_13			0x20d3
+MX28_PAD_SSP1_DATA0__GPIO_2_14			0x20e3
+MX28_PAD_SSP1_DATA3__GPIO_2_15			0x20f3
+MX28_PAD_SSP2_SCK__GPIO_2_16			0x2103
+MX28_PAD_SSP2_MOSI__GPIO_2_17			0x2113
+MX28_PAD_SSP2_MISO__GPIO_2_18			0x2123
+MX28_PAD_SSP2_SS0__GPIO_2_19			0x2133
+MX28_PAD_SSP2_SS1__GPIO_2_20			0x2143
+MX28_PAD_SSP2_SS2__GPIO_2_21			0x2153
+MX28_PAD_SSP3_SCK__GPIO_2_24			0x2183
+MX28_PAD_SSP3_MOSI__GPIO_2_25			0x2193
+MX28_PAD_SSP3_MISO__GPIO_2_26			0x21a3
+MX28_PAD_SSP3_SS0__GPIO_2_27			0x21b3
+MX28_PAD_AUART0_RX__GPIO_3_0			0x3003
+MX28_PAD_AUART0_TX__GPIO_3_1			0x3013
+MX28_PAD_AUART0_CTS__GPIO_3_2			0x3023
+MX28_PAD_AUART0_RTS__GPIO_3_3			0x3033
+MX28_PAD_AUART1_RX__GPIO_3_4			0x3043
+MX28_PAD_AUART1_TX__GPIO_3_5			0x3053
+MX28_PAD_AUART1_CTS__GPIO_3_6			0x3063
+MX28_PAD_AUART1_RTS__GPIO_3_7			0x3073
+MX28_PAD_AUART2_RX__GPIO_3_8			0x3083
+MX28_PAD_AUART2_TX__GPIO_3_9			0x3093
+MX28_PAD_AUART2_CTS__GPIO_3_10			0x30a3
+MX28_PAD_AUART2_RTS__GPIO_3_11			0x30b3
+MX28_PAD_AUART3_RX__GPIO_3_12			0x30c3
+MX28_PAD_AUART3_TX__GPIO_3_13			0x30d3
+MX28_PAD_AUART3_CTS__GPIO_3_14			0x30e3
+MX28_PAD_AUART3_RTS__GPIO_3_15			0x30f3
+MX28_PAD_PWM0__GPIO_3_16			0x3103
+MX28_PAD_PWM1__GPIO_3_17			0x3113
+MX28_PAD_PWM2__GPIO_3_18			0x3123
+MX28_PAD_SAIF0_MCLK__GPIO_3_20			0x3143
+MX28_PAD_SAIF0_LRCLK__GPIO_3_21			0x3153
+MX28_PAD_SAIF0_BITCLK__GPIO_3_22		0x3163
+MX28_PAD_SAIF0_SDATA0__GPIO_3_23		0x3173
+MX28_PAD_I2C0_SCL__GPIO_3_24			0x3183
+MX28_PAD_I2C0_SDA__GPIO_3_25			0x3193
+MX28_PAD_SAIF1_SDATA0__GPIO_3_26		0x31a3
+MX28_PAD_SPDIF__GPIO_3_27			0x31b3
+MX28_PAD_PWM3__GPIO_3_28			0x31c3
+MX28_PAD_PWM4__GPIO_3_29			0x31d3
+MX28_PAD_LCD_RESET__GPIO_3_30			0x31e3
+MX28_PAD_ENET0_MDC__GPIO_4_0			0x4003
+MX28_PAD_ENET0_MDIO__GPIO_4_1			0x4013
+MX28_PAD_ENET0_RX_EN__GPIO_4_2			0x4023
+MX28_PAD_ENET0_RXD0__GPIO_4_3			0x4033
+MX28_PAD_ENET0_RXD1__GPIO_4_4			0x4043
+MX28_PAD_ENET0_TX_CLK__GPIO_4_5			0x4053
+MX28_PAD_ENET0_TX_EN__GPIO_4_6			0x4063
+MX28_PAD_ENET0_TXD0__GPIO_4_7			0x4073
+MX28_PAD_ENET0_TXD1__GPIO_4_8			0x4083
+MX28_PAD_ENET0_RXD2__GPIO_4_9			0x4093
+MX28_PAD_ENET0_RXD3__GPIO_4_10			0x40a3
+MX28_PAD_ENET0_TXD2__GPIO_4_11			0x40b3
+MX28_PAD_ENET0_TXD3__GPIO_4_12			0x40c3
+MX28_PAD_ENET0_RX_CLK__GPIO_4_13		0x40d3
+MX28_PAD_ENET0_COL__GPIO_4_14			0x40e3
+MX28_PAD_ENET0_CRS__GPIO_4_15			0x40f3
+MX28_PAD_ENET_CLK__GPIO_4_16			0x4103
+MX28_PAD_JTAG_RTCK__GPIO_4_20			0x4143
+
+Valid values for i.MX23 pinmux-id:
+
+pinmux						id
+------						--
+MX23_PAD_GPMI_D00__GPMI_D00			0x0000
+MX23_PAD_GPMI_D01__GPMI_D01			0x0010
+MX23_PAD_GPMI_D02__GPMI_D02			0x0020
+MX23_PAD_GPMI_D03__GPMI_D03			0x0030
+MX23_PAD_GPMI_D04__GPMI_D04			0x0040
+MX23_PAD_GPMI_D05__GPMI_D05			0x0050
+MX23_PAD_GPMI_D06__GPMI_D06			0x0060
+MX23_PAD_GPMI_D07__GPMI_D07			0x0070
+MX23_PAD_GPMI_D08__GPMI_D08			0x0080
+MX23_PAD_GPMI_D09__GPMI_D09			0x0090
+MX23_PAD_GPMI_D10__GPMI_D10			0x00a0
+MX23_PAD_GPMI_D11__GPMI_D11			0x00b0
+MX23_PAD_GPMI_D12__GPMI_D12			0x00c0
+MX23_PAD_GPMI_D13__GPMI_D13			0x00d0
+MX23_PAD_GPMI_D14__GPMI_D14			0x00e0
+MX23_PAD_GPMI_D15__GPMI_D15			0x00f0
+MX23_PAD_GPMI_CLE__GPMI_CLE			0x0100
+MX23_PAD_GPMI_ALE__GPMI_ALE			0x0110
+MX23_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
+MX23_PAD_GPMI_RDY0__GPMI_RDY0			0x0130
+MX23_PAD_GPMI_RDY1__GPMI_RDY1			0x0140
+MX23_PAD_GPMI_RDY2__GPMI_RDY2			0x0150
+MX23_PAD_GPMI_RDY3__GPMI_RDY3			0x0160
+MX23_PAD_GPMI_WPN__GPMI_WPN			0x0170
+MX23_PAD_GPMI_WRN__GPMI_WRN			0x0180
+MX23_PAD_GPMI_RDN__GPMI_RDN			0x0190
+MX23_PAD_AUART1_CTS__AUART1_CTS			0x01a0
+MX23_PAD_AUART1_RTS__AUART1_RTS			0x01b0
+MX23_PAD_AUART1_RX__AUART1_RX			0x01c0
+MX23_PAD_AUART1_TX__AUART1_TX			0x01d0
+MX23_PAD_I2C_SCL__I2C_SCL			0x01e0
+MX23_PAD_I2C_SDA__I2C_SDA			0x01f0
+MX23_PAD_LCD_D00__LCD_D00			0x1000
+MX23_PAD_LCD_D01__LCD_D01			0x1010
+MX23_PAD_LCD_D02__LCD_D02			0x1020
+MX23_PAD_LCD_D03__LCD_D03			0x1030
+MX23_PAD_LCD_D04__LCD_D04			0x1040
+MX23_PAD_LCD_D05__LCD_D05			0x1050
+MX23_PAD_LCD_D06__LCD_D06			0x1060
+MX23_PAD_LCD_D07__LCD_D07			0x1070
+MX23_PAD_LCD_D08__LCD_D08			0x1080
+MX23_PAD_LCD_D09__LCD_D09			0x1090
+MX23_PAD_LCD_D10__LCD_D10			0x10a0
+MX23_PAD_LCD_D11__LCD_D11			0x10b0
+MX23_PAD_LCD_D12__LCD_D12			0x10c0
+MX23_PAD_LCD_D13__LCD_D13			0x10d0
+MX23_PAD_LCD_D14__LCD_D14			0x10e0
+MX23_PAD_LCD_D15__LCD_D15			0x10f0
+MX23_PAD_LCD_D16__LCD_D16			0x1100
+MX23_PAD_LCD_D17__LCD_D17			0x1110
+MX23_PAD_LCD_RESET__LCD_RESET			0x1120
+MX23_PAD_LCD_RS__LCD_RS				0x1130
+MX23_PAD_LCD_WR__LCD_WR				0x1140
+MX23_PAD_LCD_CS__LCD_CS				0x1150
+MX23_PAD_LCD_DOTCK__LCD_DOTCK			0x1160
+MX23_PAD_LCD_ENABLE__LCD_ENABLE			0x1170
+MX23_PAD_LCD_HSYNC__LCD_HSYNC			0x1180
+MX23_PAD_LCD_VSYNC__LCD_VSYNC			0x1190
+MX23_PAD_PWM0__PWM0				0x11a0
+MX23_PAD_PWM1__PWM1				0x11b0
+MX23_PAD_PWM2__PWM2				0x11c0
+MX23_PAD_PWM3__PWM3				0x11d0
+MX23_PAD_PWM4__PWM4				0x11e0
+MX23_PAD_SSP1_CMD__SSP1_CMD			0x2000
+MX23_PAD_SSP1_DETECT__SSP1_DETECT		0x2010
+MX23_PAD_SSP1_DATA0__SSP1_DATA0			0x2020
+MX23_PAD_SSP1_DATA1__SSP1_DATA1			0x2030
+MX23_PAD_SSP1_DATA2__SSP1_DATA2			0x2040
+MX23_PAD_SSP1_DATA3__SSP1_DATA3			0x2050
+MX23_PAD_SSP1_SCK__SSP1_SCK			0x2060
+MX23_PAD_ROTARYA__ROTARYA			0x2070
+MX23_PAD_ROTARYB__ROTARYB			0x2080
+MX23_PAD_EMI_A00__EMI_A00			0x2090
+MX23_PAD_EMI_A01__EMI_A01			0x20a0
+MX23_PAD_EMI_A02__EMI_A02			0x20b0
+MX23_PAD_EMI_A03__EMI_A03			0x20c0
+MX23_PAD_EMI_A04__EMI_A04			0x20d0
+MX23_PAD_EMI_A05__EMI_A05			0x20e0
+MX23_PAD_EMI_A06__EMI_A06			0x20f0
+MX23_PAD_EMI_A07__EMI_A07			0x2100
+MX23_PAD_EMI_A08__EMI_A08			0x2110
+MX23_PAD_EMI_A09__EMI_A09			0x2120
+MX23_PAD_EMI_A10__EMI_A10			0x2130
+MX23_PAD_EMI_A11__EMI_A11			0x2140
+MX23_PAD_EMI_A12__EMI_A12			0x2150
+MX23_PAD_EMI_BA0__EMI_BA0			0x2160
+MX23_PAD_EMI_BA1__EMI_BA1			0x2170
+MX23_PAD_EMI_CASN__EMI_CASN			0x2180
+MX23_PAD_EMI_CE0N__EMI_CE0N			0x2190
+MX23_PAD_EMI_CE1N__EMI_CE1N			0x21a0
+MX23_PAD_GPMI_CE1N__GPMI_CE1N			0x21b0
+MX23_PAD_GPMI_CE0N__GPMI_CE0N			0x21c0
+MX23_PAD_EMI_CKE__EMI_CKE			0x21d0
+MX23_PAD_EMI_RASN__EMI_RASN			0x21e0
+MX23_PAD_EMI_WEN__EMI_WEN			0x21f0
+MX23_PAD_EMI_D00__EMI_D00			0x3000
+MX23_PAD_EMI_D01__EMI_D01			0x3010
+MX23_PAD_EMI_D02__EMI_D02			0x3020
+MX23_PAD_EMI_D03__EMI_D03			0x3030
+MX23_PAD_EMI_D04__EMI_D04			0x3040
+MX23_PAD_EMI_D05__EMI_D05			0x3050
+MX23_PAD_EMI_D06__EMI_D06			0x3060
+MX23_PAD_EMI_D07__EMI_D07			0x3070
+MX23_PAD_EMI_D08__EMI_D08			0x3080
+MX23_PAD_EMI_D09__EMI_D09			0x3090
+MX23_PAD_EMI_D10__EMI_D10			0x30a0
+MX23_PAD_EMI_D11__EMI_D11			0x30b0
+MX23_PAD_EMI_D12__EMI_D12			0x30c0
+MX23_PAD_EMI_D13__EMI_D13			0x30d0
+MX23_PAD_EMI_D14__EMI_D14			0x30e0
+MX23_PAD_EMI_D15__EMI_D15			0x30f0
+MX23_PAD_EMI_DQM0__EMI_DQM0			0x3100
+MX23_PAD_EMI_DQM1__EMI_DQM1			0x3110
+MX23_PAD_EMI_DQS0__EMI_DQS0			0x3120
+MX23_PAD_EMI_DQS1__EMI_DQS1			0x3130
+MX23_PAD_EMI_CLK__EMI_CLK			0x3140
+MX23_PAD_EMI_CLKN__EMI_CLKN			0x3150
+MX23_PAD_GPMI_D00__LCD_D8			0x0001
+MX23_PAD_GPMI_D01__LCD_D9			0x0011
+MX23_PAD_GPMI_D02__LCD_D10			0x0021
+MX23_PAD_GPMI_D03__LCD_D11			0x0031
+MX23_PAD_GPMI_D04__LCD_D12			0x0041
+MX23_PAD_GPMI_D05__LCD_D13			0x0051
+MX23_PAD_GPMI_D06__LCD_D14			0x0061
+MX23_PAD_GPMI_D07__LCD_D15			0x0071
+MX23_PAD_GPMI_D08__LCD_D18			0x0081
+MX23_PAD_GPMI_D09__LCD_D19			0x0091
+MX23_PAD_GPMI_D10__LCD_D20			0x00a1
+MX23_PAD_GPMI_D11__LCD_D21			0x00b1
+MX23_PAD_GPMI_D12__LCD_D22			0x00c1
+MX23_PAD_GPMI_D13__LCD_D23			0x00d1
+MX23_PAD_GPMI_D14__AUART2_RX			0x00e1
+MX23_PAD_GPMI_D15__AUART2_TX			0x00f1
+MX23_PAD_GPMI_CLE__LCD_D16			0x0101
+MX23_PAD_GPMI_ALE__LCD_D17			0x0111
+MX23_PAD_GPMI_CE2N__ATA_A2			0x0121
+MX23_PAD_AUART1_RTS__IR_CLK			0x01b1
+MX23_PAD_AUART1_RX__IR_RX			0x01c1
+MX23_PAD_AUART1_TX__IR_TX			0x01d1
+MX23_PAD_I2C_SCL__GPMI_RDY2			0x01e1
+MX23_PAD_I2C_SDA__GPMI_CE2N			0x01f1
+MX23_PAD_LCD_D00__ETM_DA8			0x1001
+MX23_PAD_LCD_D01__ETM_DA9			0x1011
+MX23_PAD_LCD_D02__ETM_DA10			0x1021
+MX23_PAD_LCD_D03__ETM_DA11			0x1031
+MX23_PAD_LCD_D04__ETM_DA12			0x1041
+MX23_PAD_LCD_D05__ETM_DA13			0x1051
+MX23_PAD_LCD_D06__ETM_DA14			0x1061
+MX23_PAD_LCD_D07__ETM_DA15			0x1071
+MX23_PAD_LCD_D08__ETM_DA0			0x1081
+MX23_PAD_LCD_D09__ETM_DA1			0x1091
+MX23_PAD_LCD_D10__ETM_DA2			0x10a1
+MX23_PAD_LCD_D11__ETM_DA3			0x10b1
+MX23_PAD_LCD_D12__ETM_DA4			0x10c1
+MX23_PAD_LCD_D13__ETM_DA5			0x10d1
+MX23_PAD_LCD_D14__ETM_DA6			0x10e1
+MX23_PAD_LCD_D15__ETM_DA7			0x10f1
+MX23_PAD_LCD_RESET__ETM_TCTL			0x1121
+MX23_PAD_LCD_RS__ETM_TCLK			0x1131
+MX23_PAD_LCD_DOTCK__GPMI_RDY3			0x1161
+MX23_PAD_LCD_ENABLE__I2C_SCL			0x1171
+MX23_PAD_LCD_HSYNC__I2C_SDA			0x1181
+MX23_PAD_LCD_VSYNC__LCD_BUSY			0x1191
+MX23_PAD_PWM0__ROTARYA				0x11a1
+MX23_PAD_PWM1__ROTARYB				0x11b1
+MX23_PAD_PWM2__GPMI_RDY3			0x11c1
+MX23_PAD_PWM3__ETM_TCTL				0x11d1
+MX23_PAD_PWM4__ETM_TCLK				0x11e1
+MX23_PAD_SSP1_DETECT__GPMI_CE3N			0x2011
+MX23_PAD_SSP1_DATA1__I2C_SCL			0x2031
+MX23_PAD_SSP1_DATA2__I2C_SDA			0x2041
+MX23_PAD_ROTARYA__AUART2_RTS			0x2071
+MX23_PAD_ROTARYB__AUART2_CTS			0x2081
+MX23_PAD_GPMI_D00__SSP2_DATA0			0x0002
+MX23_PAD_GPMI_D01__SSP2_DATA1			0x0012
+MX23_PAD_GPMI_D02__SSP2_DATA2			0x0022
+MX23_PAD_GPMI_D03__SSP2_DATA3			0x0032
+MX23_PAD_GPMI_D04__SSP2_DATA4			0x0042
+MX23_PAD_GPMI_D05__SSP2_DATA5			0x0052
+MX23_PAD_GPMI_D06__SSP2_DATA6			0x0062
+MX23_PAD_GPMI_D07__SSP2_DATA7			0x0072
+MX23_PAD_GPMI_D08__SSP1_DATA4			0x0082
+MX23_PAD_GPMI_D09__SSP1_DATA5			0x0092
+MX23_PAD_GPMI_D10__SSP1_DATA6			0x00a2
+MX23_PAD_GPMI_D11__SSP1_DATA7			0x00b2
+MX23_PAD_GPMI_D15__GPMI_CE3N			0x00f2
+MX23_PAD_GPMI_RDY0__SSP2_DETECT			0x0132
+MX23_PAD_GPMI_RDY1__SSP2_CMD			0x0142
+MX23_PAD_GPMI_WRN__SSP2_SCK			0x0182
+MX23_PAD_AUART1_CTS__SSP1_DATA4			0x01a2
+MX23_PAD_AUART1_RTS__SSP1_DATA5			0x01b2
+MX23_PAD_AUART1_RX__SSP1_DATA6			0x01c2
+MX23_PAD_AUART1_TX__SSP1_DATA7			0x01d2
+MX23_PAD_I2C_SCL__AUART1_TX			0x01e2
+MX23_PAD_I2C_SDA__AUART1_RX			0x01f2
+MX23_PAD_LCD_D08__SAIF2_SDATA0			0x1082
+MX23_PAD_LCD_D09__SAIF1_SDATA0			0x1092
+MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK		0x10a2
+MX23_PAD_LCD_D11__SAIF_LRCLK			0x10b2
+MX23_PAD_LCD_D12__SAIF2_SDATA1			0x10c2
+MX23_PAD_LCD_D13__SAIF2_SDATA2			0x10d2
+MX23_PAD_LCD_D14__SAIF1_SDATA2			0x10e2
+MX23_PAD_LCD_D15__SAIF1_SDATA1			0x10f2
+MX23_PAD_LCD_D16__SAIF_ALT_BITCLK		0x1102
+MX23_PAD_LCD_RESET__GPMI_CE3N			0x1122
+MX23_PAD_PWM0__DUART_RX				0x11a2
+MX23_PAD_PWM1__DUART_TX				0x11b2
+MX23_PAD_PWM3__AUART1_CTS			0x11d2
+MX23_PAD_PWM4__AUART1_RTS			0x11e2
+MX23_PAD_SSP1_CMD__JTAG_TDO			0x2002
+MX23_PAD_SSP1_DETECT__USB_OTG_ID		0x2012
+MX23_PAD_SSP1_DATA0__JTAG_TDI			0x2022
+MX23_PAD_SSP1_DATA1__JTAG_TCLK			0x2032
+MX23_PAD_SSP1_DATA2__JTAG_RTCK			0x2042
+MX23_PAD_SSP1_DATA3__JTAG_TMS			0x2052
+MX23_PAD_SSP1_SCK__JTAG_TRST			0x2062
+MX23_PAD_ROTARYA__SPDIF				0x2072
+MX23_PAD_ROTARYB__GPMI_CE3N			0x2082
+MX23_PAD_GPMI_D00__GPIO_0_0			0x0003
+MX23_PAD_GPMI_D01__GPIO_0_1			0x0013
+MX23_PAD_GPMI_D02__GPIO_0_2			0x0023
+MX23_PAD_GPMI_D03__GPIO_0_3			0x0033
+MX23_PAD_GPMI_D04__GPIO_0_4			0x0043
+MX23_PAD_GPMI_D05__GPIO_0_5			0x0053
+MX23_PAD_GPMI_D06__GPIO_0_6			0x0063
+MX23_PAD_GPMI_D07__GPIO_0_7			0x0073
+MX23_PAD_GPMI_D08__GPIO_0_8			0x0083
+MX23_PAD_GPMI_D09__GPIO_0_9			0x0093
+MX23_PAD_GPMI_D10__GPIO_0_10			0x00a3
+MX23_PAD_GPMI_D11__GPIO_0_11			0x00b3
+MX23_PAD_GPMI_D12__GPIO_0_12			0x00c3
+MX23_PAD_GPMI_D13__GPIO_0_13			0x00d3
+MX23_PAD_GPMI_D14__GPIO_0_14			0x00e3
+MX23_PAD_GPMI_D15__GPIO_0_15			0x00f3
+MX23_PAD_GPMI_CLE__GPIO_0_16			0x0103
+MX23_PAD_GPMI_ALE__GPIO_0_17			0x0113
+MX23_PAD_GPMI_CE2N__GPIO_0_18			0x0123
+MX23_PAD_GPMI_RDY0__GPIO_0_19			0x0133
+MX23_PAD_GPMI_RDY1__GPIO_0_20			0x0143
+MX23_PAD_GPMI_RDY2__GPIO_0_21			0x0153
+MX23_PAD_GPMI_RDY3__GPIO_0_22			0x0163
+MX23_PAD_GPMI_WPN__GPIO_0_23			0x0173
+MX23_PAD_GPMI_WRN__GPIO_0_24			0x0183
+MX23_PAD_GPMI_RDN__GPIO_0_25			0x0193
+MX23_PAD_AUART1_CTS__GPIO_0_26			0x01a3
+MX23_PAD_AUART1_RTS__GPIO_0_27			0x01b3
+MX23_PAD_AUART1_RX__GPIO_0_28			0x01c3
+MX23_PAD_AUART1_TX__GPIO_0_29			0x01d3
+MX23_PAD_I2C_SCL__GPIO_0_30			0x01e3
+MX23_PAD_I2C_SDA__GPIO_0_31			0x01f3
+MX23_PAD_LCD_D00__GPIO_1_0			0x1003
+MX23_PAD_LCD_D01__GPIO_1_1			0x1013
+MX23_PAD_LCD_D02__GPIO_1_2			0x1023
+MX23_PAD_LCD_D03__GPIO_1_3			0x1033
+MX23_PAD_LCD_D04__GPIO_1_4			0x1043
+MX23_PAD_LCD_D05__GPIO_1_5			0x1053
+MX23_PAD_LCD_D06__GPIO_1_6			0x1063
+MX23_PAD_LCD_D07__GPIO_1_7			0x1073
+MX23_PAD_LCD_D08__GPIO_1_8			0x1083
+MX23_PAD_LCD_D09__GPIO_1_9			0x1093
+MX23_PAD_LCD_D10__GPIO_1_10			0x10a3
+MX23_PAD_LCD_D11__GPIO_1_11			0x10b3
+MX23_PAD_LCD_D12__GPIO_1_12			0x10c3
+MX23_PAD_LCD_D13__GPIO_1_13			0x10d3
+MX23_PAD_LCD_D14__GPIO_1_14			0x10e3
+MX23_PAD_LCD_D15__GPIO_1_15			0x10f3
+MX23_PAD_LCD_D16__GPIO_1_16			0x1103
+MX23_PAD_LCD_D17__GPIO_1_17			0x1113
+MX23_PAD_LCD_RESET__GPIO_1_18			0x1123
+MX23_PAD_LCD_RS__GPIO_1_19			0x1133
+MX23_PAD_LCD_WR__GPIO_1_20			0x1143
+MX23_PAD_LCD_CS__GPIO_1_21			0x1153
+MX23_PAD_LCD_DOTCK__GPIO_1_22			0x1163
+MX23_PAD_LCD_ENABLE__GPIO_1_23			0x1173
+MX23_PAD_LCD_HSYNC__GPIO_1_24			0x1183
+MX23_PAD_LCD_VSYNC__GPIO_1_25			0x1193
+MX23_PAD_PWM0__GPIO_1_26			0x11a3
+MX23_PAD_PWM1__GPIO_1_27			0x11b3
+MX23_PAD_PWM2__GPIO_1_28			0x11c3
+MX23_PAD_PWM3__GPIO_1_29			0x11d3
+MX23_PAD_PWM4__GPIO_1_30			0x11e3
+MX23_PAD_SSP1_CMD__GPIO_2_0			0x2003
+MX23_PAD_SSP1_DETECT__GPIO_2_1			0x2013
+MX23_PAD_SSP1_DATA0__GPIO_2_2			0x2023
+MX23_PAD_SSP1_DATA1__GPIO_2_3			0x2033
+MX23_PAD_SSP1_DATA2__GPIO_2_4			0x2043
+MX23_PAD_SSP1_DATA3__GPIO_2_5			0x2053
+MX23_PAD_SSP1_SCK__GPIO_2_6			0x2063
+MX23_PAD_ROTARYA__GPIO_2_7			0x2073
+MX23_PAD_ROTARYB__GPIO_2_8			0x2083
+MX23_PAD_EMI_A00__GPIO_2_9			0x2093
+MX23_PAD_EMI_A01__GPIO_2_10			0x20a3
+MX23_PAD_EMI_A02__GPIO_2_11			0x20b3
+MX23_PAD_EMI_A03__GPIO_2_12			0x20c3
+MX23_PAD_EMI_A04__GPIO_2_13			0x20d3
+MX23_PAD_EMI_A05__GPIO_2_14			0x20e3
+MX23_PAD_EMI_A06__GPIO_2_15			0x20f3
+MX23_PAD_EMI_A07__GPIO_2_16			0x2103
+MX23_PAD_EMI_A08__GPIO_2_17			0x2113
+MX23_PAD_EMI_A09__GPIO_2_18			0x2123
+MX23_PAD_EMI_A10__GPIO_2_19			0x2133
+MX23_PAD_EMI_A11__GPIO_2_20			0x2143
+MX23_PAD_EMI_A12__GPIO_2_21			0x2153
+MX23_PAD_EMI_BA0__GPIO_2_22			0x2163
+MX23_PAD_EMI_BA1__GPIO_2_23			0x2173
+MX23_PAD_EMI_CASN__GPIO_2_24			0x2183
+MX23_PAD_EMI_CE0N__GPIO_2_25			0x2193
+MX23_PAD_EMI_CE1N__GPIO_2_26			0x21a3
+MX23_PAD_GPMI_CE1N__GPIO_2_27			0x21b3
+MX23_PAD_GPMI_CE0N__GPIO_2_28			0x21c3
+MX23_PAD_EMI_CKE__GPIO_2_29			0x21d3
+MX23_PAD_EMI_RASN__GPIO_2_30			0x21e3
+MX23_PAD_EMI_WEN__GPIO_2_31			0x21f3
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 40d78aa5bca2..73f2fd66d658 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -49,6 +49,21 @@ config PINCTRL_MMP2
 	select PINCTRL_PXA3xx
 	select PINCONF
 
+config PINCTRL_MXS
+	bool
+
+config PINCTRL_IMX23
+	bool
+	select PINMUX
+	select PINCONF
+	select PINCTRL_MXS
+
+config PINCTRL_IMX28
+	bool
+	select PINMUX
+	select PINCONF
+	select PINCTRL_MXS
+
 config PINCTRL_PXA168
 	bool "PXA168 pin controller driver"
 	depends on ARCH_MMP
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 133261d821a3..5f5a0a6414a5 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -13,6 +13,9 @@ obj-$(CONFIG_PINCTRL_IMX)	+= pinctrl-imx.o
 obj-$(CONFIG_PINCTRL_IMX6Q)	+= pinctrl-imx6q.o
 obj-$(CONFIG_PINCTRL_PXA3xx)	+= pinctrl-pxa3xx.o
 obj-$(CONFIG_PINCTRL_MMP2)	+= pinctrl-mmp2.o
+obj-$(CONFIG_PINCTRL_MXS)	+= pinctrl-mxs.o
+obj-$(CONFIG_PINCTRL_IMX23)	+= pinctrl-imx23.o
+obj-$(CONFIG_PINCTRL_IMX28)	+= pinctrl-imx28.o
 obj-$(CONFIG_PINCTRL_PXA168)	+= pinctrl-pxa168.o
 obj-$(CONFIG_PINCTRL_PXA910)	+= pinctrl-pxa910.o
 obj-$(CONFIG_PINCTRL_SIRF)	+= pinctrl-sirf.o
diff --git a/drivers/pinctrl/pinctrl-imx23.c b/drivers/pinctrl/pinctrl-imx23.c
new file mode 100644
index 000000000000..75d3eff94296
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-imx23.c
@@ -0,0 +1,305 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include "pinctrl-mxs.h"
+
+enum imx23_pin_enum {
+	GPMI_D00	= PINID(0, 0),
+	GPMI_D01	= PINID(0, 1),
+	GPMI_D02	= PINID(0, 2),
+	GPMI_D03	= PINID(0, 3),
+	GPMI_D04	= PINID(0, 4),
+	GPMI_D05	= PINID(0, 5),
+	GPMI_D06	= PINID(0, 6),
+	GPMI_D07	= PINID(0, 7),
+	GPMI_D08	= PINID(0, 8),
+	GPMI_D09	= PINID(0, 9),
+	GPMI_D10	= PINID(0, 10),
+	GPMI_D11	= PINID(0, 11),
+	GPMI_D12	= PINID(0, 12),
+	GPMI_D13	= PINID(0, 13),
+	GPMI_D14	= PINID(0, 14),
+	GPMI_D15	= PINID(0, 15),
+	GPMI_CLE	= PINID(0, 16),
+	GPMI_ALE	= PINID(0, 17),
+	GPMI_CE2N	= PINID(0, 18),
+	GPMI_RDY0	= PINID(0, 19),
+	GPMI_RDY1	= PINID(0, 20),
+	GPMI_RDY2	= PINID(0, 21),
+	GPMI_RDY3	= PINID(0, 22),
+	GPMI_WPN	= PINID(0, 23),
+	GPMI_WRN	= PINID(0, 24),
+	GPMI_RDN	= PINID(0, 25),
+	AUART1_CTS	= PINID(0, 26),
+	AUART1_RTS	= PINID(0, 27),
+	AUART1_RX	= PINID(0, 28),
+	AUART1_TX	= PINID(0, 29),
+	I2C_SCL		= PINID(0, 30),
+	I2C_SDA		= PINID(0, 31),
+	LCD_D00		= PINID(1, 0),
+	LCD_D01		= PINID(1, 1),
+	LCD_D02		= PINID(1, 2),
+	LCD_D03		= PINID(1, 3),
+	LCD_D04		= PINID(1, 4),
+	LCD_D05		= PINID(1, 5),
+	LCD_D06		= PINID(1, 6),
+	LCD_D07		= PINID(1, 7),
+	LCD_D08		= PINID(1, 8),
+	LCD_D09		= PINID(1, 9),
+	LCD_D10		= PINID(1, 10),
+	LCD_D11		= PINID(1, 11),
+	LCD_D12		= PINID(1, 12),
+	LCD_D13		= PINID(1, 13),
+	LCD_D14		= PINID(1, 14),
+	LCD_D15		= PINID(1, 15),
+	LCD_D16		= PINID(1, 16),
+	LCD_D17		= PINID(1, 17),
+	LCD_RESET	= PINID(1, 18),
+	LCD_RS		= PINID(1, 19),
+	LCD_WR		= PINID(1, 20),
+	LCD_CS		= PINID(1, 21),
+	LCD_DOTCK	= PINID(1, 22),
+	LCD_ENABLE	= PINID(1, 23),
+	LCD_HSYNC	= PINID(1, 24),
+	LCD_VSYNC	= PINID(1, 25),
+	PWM0		= PINID(1, 26),
+	PWM1		= PINID(1, 27),
+	PWM2		= PINID(1, 28),
+	PWM3		= PINID(1, 29),
+	PWM4		= PINID(1, 30),
+	SSP1_CMD	= PINID(2, 0),
+	SSP1_DETECT	= PINID(2, 1),
+	SSP1_DATA0	= PINID(2, 2),
+	SSP1_DATA1	= PINID(2, 3),
+	SSP1_DATA2	= PINID(2, 4),
+	SSP1_DATA3	= PINID(2, 5),
+	SSP1_SCK	= PINID(2, 6),
+	ROTARYA		= PINID(2, 7),
+	ROTARYB		= PINID(2, 8),
+	EMI_A00		= PINID(2, 9),
+	EMI_A01		= PINID(2, 10),
+	EMI_A02		= PINID(2, 11),
+	EMI_A03		= PINID(2, 12),
+	EMI_A04		= PINID(2, 13),
+	EMI_A05		= PINID(2, 14),
+	EMI_A06		= PINID(2, 15),
+	EMI_A07		= PINID(2, 16),
+	EMI_A08		= PINID(2, 17),
+	EMI_A09		= PINID(2, 18),
+	EMI_A10		= PINID(2, 19),
+	EMI_A11		= PINID(2, 20),
+	EMI_A12		= PINID(2, 21),
+	EMI_BA0		= PINID(2, 22),
+	EMI_BA1		= PINID(2, 23),
+	EMI_CASN	= PINID(2, 24),
+	EMI_CE0N	= PINID(2, 25),
+	EMI_CE1N	= PINID(2, 26),
+	GPMI_CE1N	= PINID(2, 27),
+	GPMI_CE0N	= PINID(2, 28),
+	EMI_CKE		= PINID(2, 29),
+	EMI_RASN	= PINID(2, 30),
+	EMI_WEN		= PINID(2, 31),
+	EMI_D00		= PINID(3, 0),
+	EMI_D01		= PINID(3, 1),
+	EMI_D02		= PINID(3, 2),
+	EMI_D03		= PINID(3, 3),
+	EMI_D04		= PINID(3, 4),
+	EMI_D05		= PINID(3, 5),
+	EMI_D06		= PINID(3, 6),
+	EMI_D07		= PINID(3, 7),
+	EMI_D08		= PINID(3, 8),
+	EMI_D09		= PINID(3, 9),
+	EMI_D10		= PINID(3, 10),
+	EMI_D11		= PINID(3, 11),
+	EMI_D12		= PINID(3, 12),
+	EMI_D13		= PINID(3, 13),
+	EMI_D14		= PINID(3, 14),
+	EMI_D15		= PINID(3, 15),
+	EMI_DQM0	= PINID(3, 16),
+	EMI_DQM1	= PINID(3, 17),
+	EMI_DQS0	= PINID(3, 18),
+	EMI_DQS1	= PINID(3, 19),
+	EMI_CLK		= PINID(3, 20),
+	EMI_CLKN	= PINID(3, 21),
+};
+
+static const struct pinctrl_pin_desc imx23_pins[] = {
+	MXS_PINCTRL_PIN(GPMI_D00),
+	MXS_PINCTRL_PIN(GPMI_D01),
+	MXS_PINCTRL_PIN(GPMI_D02),
+	MXS_PINCTRL_PIN(GPMI_D03),
+	MXS_PINCTRL_PIN(GPMI_D04),
+	MXS_PINCTRL_PIN(GPMI_D05),
+	MXS_PINCTRL_PIN(GPMI_D06),
+	MXS_PINCTRL_PIN(GPMI_D07),
+	MXS_PINCTRL_PIN(GPMI_D08),
+	MXS_PINCTRL_PIN(GPMI_D09),
+	MXS_PINCTRL_PIN(GPMI_D10),
+	MXS_PINCTRL_PIN(GPMI_D11),
+	MXS_PINCTRL_PIN(GPMI_D12),
+	MXS_PINCTRL_PIN(GPMI_D13),
+	MXS_PINCTRL_PIN(GPMI_D14),
+	MXS_PINCTRL_PIN(GPMI_D15),
+	MXS_PINCTRL_PIN(GPMI_CLE),
+	MXS_PINCTRL_PIN(GPMI_ALE),
+	MXS_PINCTRL_PIN(GPMI_CE2N),
+	MXS_PINCTRL_PIN(GPMI_RDY0),
+	MXS_PINCTRL_PIN(GPMI_RDY1),
+	MXS_PINCTRL_PIN(GPMI_RDY2),
+	MXS_PINCTRL_PIN(GPMI_RDY3),
+	MXS_PINCTRL_PIN(GPMI_WPN),
+	MXS_PINCTRL_PIN(GPMI_WRN),
+	MXS_PINCTRL_PIN(GPMI_RDN),
+	MXS_PINCTRL_PIN(AUART1_CTS),
+	MXS_PINCTRL_PIN(AUART1_RTS),
+	MXS_PINCTRL_PIN(AUART1_RX),
+	MXS_PINCTRL_PIN(AUART1_TX),
+	MXS_PINCTRL_PIN(I2C_SCL),
+	MXS_PINCTRL_PIN(I2C_SDA),
+	MXS_PINCTRL_PIN(LCD_D00),
+	MXS_PINCTRL_PIN(LCD_D01),
+	MXS_PINCTRL_PIN(LCD_D02),
+	MXS_PINCTRL_PIN(LCD_D03),
+	MXS_PINCTRL_PIN(LCD_D04),
+	MXS_PINCTRL_PIN(LCD_D05),
+	MXS_PINCTRL_PIN(LCD_D06),
+	MXS_PINCTRL_PIN(LCD_D07),
+	MXS_PINCTRL_PIN(LCD_D08),
+	MXS_PINCTRL_PIN(LCD_D09),
+	MXS_PINCTRL_PIN(LCD_D10),
+	MXS_PINCTRL_PIN(LCD_D11),
+	MXS_PINCTRL_PIN(LCD_D12),
+	MXS_PINCTRL_PIN(LCD_D13),
+	MXS_PINCTRL_PIN(LCD_D14),
+	MXS_PINCTRL_PIN(LCD_D15),
+	MXS_PINCTRL_PIN(LCD_D16),
+	MXS_PINCTRL_PIN(LCD_D17),
+	MXS_PINCTRL_PIN(LCD_RESET),
+	MXS_PINCTRL_PIN(LCD_RS),
+	MXS_PINCTRL_PIN(LCD_WR),
+	MXS_PINCTRL_PIN(LCD_CS),
+	MXS_PINCTRL_PIN(LCD_DOTCK),
+	MXS_PINCTRL_PIN(LCD_ENABLE),
+	MXS_PINCTRL_PIN(LCD_HSYNC),
+	MXS_PINCTRL_PIN(LCD_VSYNC),
+	MXS_PINCTRL_PIN(PWM0),
+	MXS_PINCTRL_PIN(PWM1),
+	MXS_PINCTRL_PIN(PWM2),
+	MXS_PINCTRL_PIN(PWM3),
+	MXS_PINCTRL_PIN(PWM4),
+	MXS_PINCTRL_PIN(SSP1_CMD),
+	MXS_PINCTRL_PIN(SSP1_DETECT),
+	MXS_PINCTRL_PIN(SSP1_DATA0),
+	MXS_PINCTRL_PIN(SSP1_DATA1),
+	MXS_PINCTRL_PIN(SSP1_DATA2),
+	MXS_PINCTRL_PIN(SSP1_DATA3),
+	MXS_PINCTRL_PIN(SSP1_SCK),
+	MXS_PINCTRL_PIN(ROTARYA),
+	MXS_PINCTRL_PIN(ROTARYB),
+	MXS_PINCTRL_PIN(EMI_A00),
+	MXS_PINCTRL_PIN(EMI_A01),
+	MXS_PINCTRL_PIN(EMI_A02),
+	MXS_PINCTRL_PIN(EMI_A03),
+	MXS_PINCTRL_PIN(EMI_A04),
+	MXS_PINCTRL_PIN(EMI_A05),
+	MXS_PINCTRL_PIN(EMI_A06),
+	MXS_PINCTRL_PIN(EMI_A07),
+	MXS_PINCTRL_PIN(EMI_A08),
+	MXS_PINCTRL_PIN(EMI_A09),
+	MXS_PINCTRL_PIN(EMI_A10),
+	MXS_PINCTRL_PIN(EMI_A11),
+	MXS_PINCTRL_PIN(EMI_A12),
+	MXS_PINCTRL_PIN(EMI_BA0),
+	MXS_PINCTRL_PIN(EMI_BA1),
+	MXS_PINCTRL_PIN(EMI_CASN),
+	MXS_PINCTRL_PIN(EMI_CE0N),
+	MXS_PINCTRL_PIN(EMI_CE1N),
+	MXS_PINCTRL_PIN(GPMI_CE1N),
+	MXS_PINCTRL_PIN(GPMI_CE0N),
+	MXS_PINCTRL_PIN(EMI_CKE),
+	MXS_PINCTRL_PIN(EMI_RASN),
+	MXS_PINCTRL_PIN(EMI_WEN),
+	MXS_PINCTRL_PIN(EMI_D00),
+	MXS_PINCTRL_PIN(EMI_D01),
+	MXS_PINCTRL_PIN(EMI_D02),
+	MXS_PINCTRL_PIN(EMI_D03),
+	MXS_PINCTRL_PIN(EMI_D04),
+	MXS_PINCTRL_PIN(EMI_D05),
+	MXS_PINCTRL_PIN(EMI_D06),
+	MXS_PINCTRL_PIN(EMI_D07),
+	MXS_PINCTRL_PIN(EMI_D08),
+	MXS_PINCTRL_PIN(EMI_D09),
+	MXS_PINCTRL_PIN(EMI_D10),
+	MXS_PINCTRL_PIN(EMI_D11),
+	MXS_PINCTRL_PIN(EMI_D12),
+	MXS_PINCTRL_PIN(EMI_D13),
+	MXS_PINCTRL_PIN(EMI_D14),
+	MXS_PINCTRL_PIN(EMI_D15),
+	MXS_PINCTRL_PIN(EMI_DQM0),
+	MXS_PINCTRL_PIN(EMI_DQM1),
+	MXS_PINCTRL_PIN(EMI_DQS0),
+	MXS_PINCTRL_PIN(EMI_DQS1),
+	MXS_PINCTRL_PIN(EMI_CLK),
+	MXS_PINCTRL_PIN(EMI_CLKN),
+};
+
+static struct mxs_regs imx23_regs = {
+	.muxsel = 0x100,
+	.drive = 0x200,
+	.pull = 0x400,
+};
+
+static struct mxs_pinctrl_soc_data imx23_pinctrl_data = {
+	.regs = &imx23_regs,
+	.pins = imx23_pins,
+	.npins = ARRAY_SIZE(imx23_pins),
+};
+
+static int __devinit imx23_pinctrl_probe(struct platform_device *pdev)
+{
+	return mxs_pinctrl_probe(pdev, &imx23_pinctrl_data);
+}
+
+static struct of_device_id imx23_pinctrl_of_match[] __devinitdata = {
+	{ .compatible = "fsl,imx23-pinctrl", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx23_pinctrl_of_match);
+
+static struct platform_driver imx23_pinctrl_driver = {
+	.driver = {
+		.name = "imx23-pinctrl",
+		.owner = THIS_MODULE,
+		.of_match_table = imx23_pinctrl_of_match,
+	},
+	.probe = imx23_pinctrl_probe,
+	.remove = __devexit_p(mxs_pinctrl_remove),
+};
+
+static int __init imx23_pinctrl_init(void)
+{
+	return platform_driver_register(&imx23_pinctrl_driver);
+}
+arch_initcall(imx23_pinctrl_init);
+
+static void __exit imx23_pinctrl_exit(void)
+{
+	platform_driver_unregister(&imx23_pinctrl_driver);
+}
+module_exit(imx23_pinctrl_exit);
+
+MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
+MODULE_DESCRIPTION("Freescale i.MX23 pinctrl driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/pinctrl-imx28.c b/drivers/pinctrl/pinctrl-imx28.c
new file mode 100644
index 000000000000..b973026811a2
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-imx28.c
@@ -0,0 +1,421 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include "pinctrl-mxs.h"
+
+enum imx28_pin_enum {
+	GPMI_D00	= PINID(0, 0),
+	GPMI_D01	= PINID(0, 1),
+	GPMI_D02	= PINID(0, 2),
+	GPMI_D03	= PINID(0, 3),
+	GPMI_D04	= PINID(0, 4),
+	GPMI_D05	= PINID(0, 5),
+	GPMI_D06	= PINID(0, 6),
+	GPMI_D07	= PINID(0, 7),
+	GPMI_CE0N	= PINID(0, 16),
+	GPMI_CE1N	= PINID(0, 17),
+	GPMI_CE2N	= PINID(0, 18),
+	GPMI_CE3N	= PINID(0, 19),
+	GPMI_RDY0	= PINID(0, 20),
+	GPMI_RDY1	= PINID(0, 21),
+	GPMI_RDY2	= PINID(0, 22),
+	GPMI_RDY3	= PINID(0, 23),
+	GPMI_RDN	= PINID(0, 24),
+	GPMI_WRN	= PINID(0, 25),
+	GPMI_ALE	= PINID(0, 26),
+	GPMI_CLE	= PINID(0, 27),
+	GPMI_RESETN	= PINID(0, 28),
+	LCD_D00		= PINID(1, 0),
+	LCD_D01		= PINID(1, 1),
+	LCD_D02		= PINID(1, 2),
+	LCD_D03		= PINID(1, 3),
+	LCD_D04		= PINID(1, 4),
+	LCD_D05		= PINID(1, 5),
+	LCD_D06		= PINID(1, 6),
+	LCD_D07		= PINID(1, 7),
+	LCD_D08		= PINID(1, 8),
+	LCD_D09		= PINID(1, 9),
+	LCD_D10		= PINID(1, 10),
+	LCD_D11		= PINID(1, 11),
+	LCD_D12		= PINID(1, 12),
+	LCD_D13		= PINID(1, 13),
+	LCD_D14		= PINID(1, 14),
+	LCD_D15		= PINID(1, 15),
+	LCD_D16		= PINID(1, 16),
+	LCD_D17		= PINID(1, 17),
+	LCD_D18		= PINID(1, 18),
+	LCD_D19		= PINID(1, 19),
+	LCD_D20		= PINID(1, 20),
+	LCD_D21		= PINID(1, 21),
+	LCD_D22		= PINID(1, 22),
+	LCD_D23		= PINID(1, 23),
+	LCD_RD_E	= PINID(1, 24),
+	LCD_WR_RWN	= PINID(1, 25),
+	LCD_RS		= PINID(1, 26),
+	LCD_CS		= PINID(1, 27),
+	LCD_VSYNC	= PINID(1, 28),
+	LCD_HSYNC	= PINID(1, 29),
+	LCD_DOTCLK	= PINID(1, 30),
+	LCD_ENABLE	= PINID(1, 31),
+	SSP0_DATA0	= PINID(2, 0),
+	SSP0_DATA1	= PINID(2, 1),
+	SSP0_DATA2	= PINID(2, 2),
+	SSP0_DATA3	= PINID(2, 3),
+	SSP0_DATA4	= PINID(2, 4),
+	SSP0_DATA5	= PINID(2, 5),
+	SSP0_DATA6	= PINID(2, 6),
+	SSP0_DATA7	= PINID(2, 7),
+	SSP0_CMD	= PINID(2, 8),
+	SSP0_DETECT	= PINID(2, 9),
+	SSP0_SCK	= PINID(2, 10),
+	SSP1_SCK	= PINID(2, 12),
+	SSP1_CMD	= PINID(2, 13),
+	SSP1_DATA0	= PINID(2, 14),
+	SSP1_DATA3	= PINID(2, 15),
+	SSP2_SCK	= PINID(2, 16),
+	SSP2_MOSI	= PINID(2, 17),
+	SSP2_MISO	= PINID(2, 18),
+	SSP2_SS0	= PINID(2, 19),
+	SSP2_SS1	= PINID(2, 20),
+	SSP2_SS2	= PINID(2, 21),
+	SSP3_SCK	= PINID(2, 24),
+	SSP3_MOSI	= PINID(2, 25),
+	SSP3_MISO	= PINID(2, 26),
+	SSP3_SS0	= PINID(2, 27),
+	AUART0_RX	= PINID(3, 0),
+	AUART0_TX	= PINID(3, 1),
+	AUART0_CTS	= PINID(3, 2),
+	AUART0_RTS	= PINID(3, 3),
+	AUART1_RX	= PINID(3, 4),
+	AUART1_TX	= PINID(3, 5),
+	AUART1_CTS	= PINID(3, 6),
+	AUART1_RTS	= PINID(3, 7),
+	AUART2_RX	= PINID(3, 8),
+	AUART2_TX	= PINID(3, 9),
+	AUART2_CTS	= PINID(3, 10),
+	AUART2_RTS	= PINID(3, 11),
+	AUART3_RX	= PINID(3, 12),
+	AUART3_TX	= PINID(3, 13),
+	AUART3_CTS	= PINID(3, 14),
+	AUART3_RTS	= PINID(3, 15),
+	PWM0		= PINID(3, 16),
+	PWM1		= PINID(3, 17),
+	PWM2		= PINID(3, 18),
+	SAIF0_MCLK	= PINID(3, 20),
+	SAIF0_LRCLK	= PINID(3, 21),
+	SAIF0_BITCLK	= PINID(3, 22),
+	SAIF0_SDATA0	= PINID(3, 23),
+	I2C0_SCL	= PINID(3, 24),
+	I2C0_SDA	= PINID(3, 25),
+	SAIF1_SDATA0	= PINID(3, 26),
+	SPDIF		= PINID(3, 27),
+	PWM3		= PINID(3, 28),
+	PWM4		= PINID(3, 29),
+	LCD_RESET	= PINID(3, 30),
+	ENET0_MDC	= PINID(4, 0),
+	ENET0_MDIO	= PINID(4, 1),
+	ENET0_RX_EN	= PINID(4, 2),
+	ENET0_RXD0	= PINID(4, 3),
+	ENET0_RXD1	= PINID(4, 4),
+	ENET0_TX_CLK	= PINID(4, 5),
+	ENET0_TX_EN	= PINID(4, 6),
+	ENET0_TXD0	= PINID(4, 7),
+	ENET0_TXD1	= PINID(4, 8),
+	ENET0_RXD2	= PINID(4, 9),
+	ENET0_RXD3	= PINID(4, 10),
+	ENET0_TXD2	= PINID(4, 11),
+	ENET0_TXD3	= PINID(4, 12),
+	ENET0_RX_CLK	= PINID(4, 13),
+	ENET0_COL	= PINID(4, 14),
+	ENET0_CRS	= PINID(4, 15),
+	ENET_CLK	= PINID(4, 16),
+	JTAG_RTCK	= PINID(4, 20),
+	EMI_D00		= PINID(5, 0),
+	EMI_D01		= PINID(5, 1),
+	EMI_D02		= PINID(5, 2),
+	EMI_D03		= PINID(5, 3),
+	EMI_D04		= PINID(5, 4),
+	EMI_D05		= PINID(5, 5),
+	EMI_D06		= PINID(5, 6),
+	EMI_D07		= PINID(5, 7),
+	EMI_D08		= PINID(5, 8),
+	EMI_D09		= PINID(5, 9),
+	EMI_D10		= PINID(5, 10),
+	EMI_D11		= PINID(5, 11),
+	EMI_D12		= PINID(5, 12),
+	EMI_D13		= PINID(5, 13),
+	EMI_D14		= PINID(5, 14),
+	EMI_D15		= PINID(5, 15),
+	EMI_ODT0	= PINID(5, 16),
+	EMI_DQM0	= PINID(5, 17),
+	EMI_ODT1	= PINID(5, 18),
+	EMI_DQM1	= PINID(5, 19),
+	EMI_DDR_OPEN_FB	= PINID(5, 20),
+	EMI_CLK		= PINID(5, 21),
+	EMI_DQS0	= PINID(5, 22),
+	EMI_DQS1	= PINID(5, 23),
+	EMI_DDR_OPEN	= PINID(5, 26),
+	EMI_A00		= PINID(6, 0),
+	EMI_A01		= PINID(6, 1),
+	EMI_A02		= PINID(6, 2),
+	EMI_A03		= PINID(6, 3),
+	EMI_A04		= PINID(6, 4),
+	EMI_A05		= PINID(6, 5),
+	EMI_A06		= PINID(6, 6),
+	EMI_A07		= PINID(6, 7),
+	EMI_A08		= PINID(6, 8),
+	EMI_A09		= PINID(6, 9),
+	EMI_A10		= PINID(6, 10),
+	EMI_A11		= PINID(6, 11),
+	EMI_A12		= PINID(6, 12),
+	EMI_A13		= PINID(6, 13),
+	EMI_A14		= PINID(6, 14),
+	EMI_BA0		= PINID(6, 16),
+	EMI_BA1		= PINID(6, 17),
+	EMI_BA2		= PINID(6, 18),
+	EMI_CASN	= PINID(6, 19),
+	EMI_RASN	= PINID(6, 20),
+	EMI_WEN		= PINID(6, 21),
+	EMI_CE0N	= PINID(6, 22),
+	EMI_CE1N	= PINID(6, 23),
+	EMI_CKE		= PINID(6, 24),
+};
+
+static const struct pinctrl_pin_desc imx28_pins[] = {
+	MXS_PINCTRL_PIN(GPMI_D00),
+	MXS_PINCTRL_PIN(GPMI_D01),
+	MXS_PINCTRL_PIN(GPMI_D02),
+	MXS_PINCTRL_PIN(GPMI_D03),
+	MXS_PINCTRL_PIN(GPMI_D04),
+	MXS_PINCTRL_PIN(GPMI_D05),
+	MXS_PINCTRL_PIN(GPMI_D06),
+	MXS_PINCTRL_PIN(GPMI_D07),
+	MXS_PINCTRL_PIN(GPMI_CE0N),
+	MXS_PINCTRL_PIN(GPMI_CE1N),
+	MXS_PINCTRL_PIN(GPMI_CE2N),
+	MXS_PINCTRL_PIN(GPMI_CE3N),
+	MXS_PINCTRL_PIN(GPMI_RDY0),
+	MXS_PINCTRL_PIN(GPMI_RDY1),
+	MXS_PINCTRL_PIN(GPMI_RDY2),
+	MXS_PINCTRL_PIN(GPMI_RDY3),
+	MXS_PINCTRL_PIN(GPMI_RDN),
+	MXS_PINCTRL_PIN(GPMI_WRN),
+	MXS_PINCTRL_PIN(GPMI_ALE),
+	MXS_PINCTRL_PIN(GPMI_CLE),
+	MXS_PINCTRL_PIN(GPMI_RESETN),
+	MXS_PINCTRL_PIN(LCD_D00),
+	MXS_PINCTRL_PIN(LCD_D01),
+	MXS_PINCTRL_PIN(LCD_D02),
+	MXS_PINCTRL_PIN(LCD_D03),
+	MXS_PINCTRL_PIN(LCD_D04),
+	MXS_PINCTRL_PIN(LCD_D05),
+	MXS_PINCTRL_PIN(LCD_D06),
+	MXS_PINCTRL_PIN(LCD_D07),
+	MXS_PINCTRL_PIN(LCD_D08),
+	MXS_PINCTRL_PIN(LCD_D09),
+	MXS_PINCTRL_PIN(LCD_D10),
+	MXS_PINCTRL_PIN(LCD_D11),
+	MXS_PINCTRL_PIN(LCD_D12),
+	MXS_PINCTRL_PIN(LCD_D13),
+	MXS_PINCTRL_PIN(LCD_D14),
+	MXS_PINCTRL_PIN(LCD_D15),
+	MXS_PINCTRL_PIN(LCD_D16),
+	MXS_PINCTRL_PIN(LCD_D17),
+	MXS_PINCTRL_PIN(LCD_D18),
+	MXS_PINCTRL_PIN(LCD_D19),
+	MXS_PINCTRL_PIN(LCD_D20),
+	MXS_PINCTRL_PIN(LCD_D21),
+	MXS_PINCTRL_PIN(LCD_D22),
+	MXS_PINCTRL_PIN(LCD_D23),
+	MXS_PINCTRL_PIN(LCD_RD_E),
+	MXS_PINCTRL_PIN(LCD_WR_RWN),
+	MXS_PINCTRL_PIN(LCD_RS),
+	MXS_PINCTRL_PIN(LCD_CS),
+	MXS_PINCTRL_PIN(LCD_VSYNC),
+	MXS_PINCTRL_PIN(LCD_HSYNC),
+	MXS_PINCTRL_PIN(LCD_DOTCLK),
+	MXS_PINCTRL_PIN(LCD_ENABLE),
+	MXS_PINCTRL_PIN(SSP0_DATA0),
+	MXS_PINCTRL_PIN(SSP0_DATA1),
+	MXS_PINCTRL_PIN(SSP0_DATA2),
+	MXS_PINCTRL_PIN(SSP0_DATA3),
+	MXS_PINCTRL_PIN(SSP0_DATA4),
+	MXS_PINCTRL_PIN(SSP0_DATA5),
+	MXS_PINCTRL_PIN(SSP0_DATA6),
+	MXS_PINCTRL_PIN(SSP0_DATA7),
+	MXS_PINCTRL_PIN(SSP0_CMD),
+	MXS_PINCTRL_PIN(SSP0_DETECT),
+	MXS_PINCTRL_PIN(SSP0_SCK),
+	MXS_PINCTRL_PIN(SSP1_SCK),
+	MXS_PINCTRL_PIN(SSP1_CMD),
+	MXS_PINCTRL_PIN(SSP1_DATA0),
+	MXS_PINCTRL_PIN(SSP1_DATA3),
+	MXS_PINCTRL_PIN(SSP2_SCK),
+	MXS_PINCTRL_PIN(SSP2_MOSI),
+	MXS_PINCTRL_PIN(SSP2_MISO),
+	MXS_PINCTRL_PIN(SSP2_SS0),
+	MXS_PINCTRL_PIN(SSP2_SS1),
+	MXS_PINCTRL_PIN(SSP2_SS2),
+	MXS_PINCTRL_PIN(SSP3_SCK),
+	MXS_PINCTRL_PIN(SSP3_MOSI),
+	MXS_PINCTRL_PIN(SSP3_MISO),
+	MXS_PINCTRL_PIN(SSP3_SS0),
+	MXS_PINCTRL_PIN(AUART0_RX),
+	MXS_PINCTRL_PIN(AUART0_TX),
+	MXS_PINCTRL_PIN(AUART0_CTS),
+	MXS_PINCTRL_PIN(AUART0_RTS),
+	MXS_PINCTRL_PIN(AUART1_RX),
+	MXS_PINCTRL_PIN(AUART1_TX),
+	MXS_PINCTRL_PIN(AUART1_CTS),
+	MXS_PINCTRL_PIN(AUART1_RTS),
+	MXS_PINCTRL_PIN(AUART2_RX),
+	MXS_PINCTRL_PIN(AUART2_TX),
+	MXS_PINCTRL_PIN(AUART2_CTS),
+	MXS_PINCTRL_PIN(AUART2_RTS),
+	MXS_PINCTRL_PIN(AUART3_RX),
+	MXS_PINCTRL_PIN(AUART3_TX),
+	MXS_PINCTRL_PIN(AUART3_CTS),
+	MXS_PINCTRL_PIN(AUART3_RTS),
+	MXS_PINCTRL_PIN(PWM0),
+	MXS_PINCTRL_PIN(PWM1),
+	MXS_PINCTRL_PIN(PWM2),
+	MXS_PINCTRL_PIN(SAIF0_MCLK),
+	MXS_PINCTRL_PIN(SAIF0_LRCLK),
+	MXS_PINCTRL_PIN(SAIF0_BITCLK),
+	MXS_PINCTRL_PIN(SAIF0_SDATA0),
+	MXS_PINCTRL_PIN(I2C0_SCL),
+	MXS_PINCTRL_PIN(I2C0_SDA),
+	MXS_PINCTRL_PIN(SAIF1_SDATA0),
+	MXS_PINCTRL_PIN(SPDIF),
+	MXS_PINCTRL_PIN(PWM3),
+	MXS_PINCTRL_PIN(PWM4),
+	MXS_PINCTRL_PIN(LCD_RESET),
+	MXS_PINCTRL_PIN(ENET0_MDC),
+	MXS_PINCTRL_PIN(ENET0_MDIO),
+	MXS_PINCTRL_PIN(ENET0_RX_EN),
+	MXS_PINCTRL_PIN(ENET0_RXD0),
+	MXS_PINCTRL_PIN(ENET0_RXD1),
+	MXS_PINCTRL_PIN(ENET0_TX_CLK),
+	MXS_PINCTRL_PIN(ENET0_TX_EN),
+	MXS_PINCTRL_PIN(ENET0_TXD0),
+	MXS_PINCTRL_PIN(ENET0_TXD1),
+	MXS_PINCTRL_PIN(ENET0_RXD2),
+	MXS_PINCTRL_PIN(ENET0_RXD3),
+	MXS_PINCTRL_PIN(ENET0_TXD2),
+	MXS_PINCTRL_PIN(ENET0_TXD3),
+	MXS_PINCTRL_PIN(ENET0_RX_CLK),
+	MXS_PINCTRL_PIN(ENET0_COL),
+	MXS_PINCTRL_PIN(ENET0_CRS),
+	MXS_PINCTRL_PIN(ENET_CLK),
+	MXS_PINCTRL_PIN(JTAG_RTCK),
+	MXS_PINCTRL_PIN(EMI_D00),
+	MXS_PINCTRL_PIN(EMI_D01),
+	MXS_PINCTRL_PIN(EMI_D02),
+	MXS_PINCTRL_PIN(EMI_D03),
+	MXS_PINCTRL_PIN(EMI_D04),
+	MXS_PINCTRL_PIN(EMI_D05),
+	MXS_PINCTRL_PIN(EMI_D06),
+	MXS_PINCTRL_PIN(EMI_D07),
+	MXS_PINCTRL_PIN(EMI_D08),
+	MXS_PINCTRL_PIN(EMI_D09),
+	MXS_PINCTRL_PIN(EMI_D10),
+	MXS_PINCTRL_PIN(EMI_D11),
+	MXS_PINCTRL_PIN(EMI_D12),
+	MXS_PINCTRL_PIN(EMI_D13),
+	MXS_PINCTRL_PIN(EMI_D14),
+	MXS_PINCTRL_PIN(EMI_D15),
+	MXS_PINCTRL_PIN(EMI_ODT0),
+	MXS_PINCTRL_PIN(EMI_DQM0),
+	MXS_PINCTRL_PIN(EMI_ODT1),
+	MXS_PINCTRL_PIN(EMI_DQM1),
+	MXS_PINCTRL_PIN(EMI_DDR_OPEN_FB),
+	MXS_PINCTRL_PIN(EMI_CLK),
+	MXS_PINCTRL_PIN(EMI_DQS0),
+	MXS_PINCTRL_PIN(EMI_DQS1),
+	MXS_PINCTRL_PIN(EMI_DDR_OPEN),
+	MXS_PINCTRL_PIN(EMI_A00),
+	MXS_PINCTRL_PIN(EMI_A01),
+	MXS_PINCTRL_PIN(EMI_A02),
+	MXS_PINCTRL_PIN(EMI_A03),
+	MXS_PINCTRL_PIN(EMI_A04),
+	MXS_PINCTRL_PIN(EMI_A05),
+	MXS_PINCTRL_PIN(EMI_A06),
+	MXS_PINCTRL_PIN(EMI_A07),
+	MXS_PINCTRL_PIN(EMI_A08),
+	MXS_PINCTRL_PIN(EMI_A09),
+	MXS_PINCTRL_PIN(EMI_A10),
+	MXS_PINCTRL_PIN(EMI_A11),
+	MXS_PINCTRL_PIN(EMI_A12),
+	MXS_PINCTRL_PIN(EMI_A13),
+	MXS_PINCTRL_PIN(EMI_A14),
+	MXS_PINCTRL_PIN(EMI_BA0),
+	MXS_PINCTRL_PIN(EMI_BA1),
+	MXS_PINCTRL_PIN(EMI_BA2),
+	MXS_PINCTRL_PIN(EMI_CASN),
+	MXS_PINCTRL_PIN(EMI_RASN),
+	MXS_PINCTRL_PIN(EMI_WEN),
+	MXS_PINCTRL_PIN(EMI_CE0N),
+	MXS_PINCTRL_PIN(EMI_CE1N),
+	MXS_PINCTRL_PIN(EMI_CKE),
+};
+
+static struct mxs_regs imx28_regs = {
+	.muxsel = 0x100,
+	.drive = 0x300,
+	.pull = 0x600,
+};
+
+static struct mxs_pinctrl_soc_data imx28_pinctrl_data = {
+	.regs = &imx28_regs,
+	.pins = imx28_pins,
+	.npins = ARRAY_SIZE(imx28_pins),
+};
+
+static int __devinit imx28_pinctrl_probe(struct platform_device *pdev)
+{
+	return mxs_pinctrl_probe(pdev, &imx28_pinctrl_data);
+}
+
+static struct of_device_id imx28_pinctrl_of_match[] __devinitdata = {
+	{ .compatible = "fsl,imx28-pinctrl", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx28_pinctrl_of_match);
+
+static struct platform_driver imx28_pinctrl_driver = {
+	.driver = {
+		.name = "imx28-pinctrl",
+		.owner = THIS_MODULE,
+		.of_match_table = imx28_pinctrl_of_match,
+	},
+	.probe = imx28_pinctrl_probe,
+	.remove = __devexit_p(mxs_pinctrl_remove),
+};
+
+static int __init imx28_pinctrl_init(void)
+{
+	return platform_driver_register(&imx28_pinctrl_driver);
+}
+arch_initcall(imx28_pinctrl_init);
+
+static void __exit imx28_pinctrl_exit(void)
+{
+	platform_driver_unregister(&imx28_pinctrl_driver);
+}
+module_exit(imx28_pinctrl_exit);
+
+MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
+MODULE_DESCRIPTION("Freescale i.MX28 pinctrl driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/pinctrl-mxs.c b/drivers/pinctrl/pinctrl-mxs.c
new file mode 100644
index 000000000000..93cd959971c5
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-mxs.c
@@ -0,0 +1,508 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include "core.h"
+#include "pinctrl-mxs.h"
+
+#define SUFFIX_LEN	4
+
+struct mxs_pinctrl_data {
+	struct device *dev;
+	struct pinctrl_dev *pctl;
+	void __iomem *base;
+	struct mxs_pinctrl_soc_data *soc;
+};
+
+static int mxs_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	struct mxs_pinctrl_data *d = pinctrl_dev_get_drvdata(pctldev);
+
+	return d->soc->ngroups;
+}
+
+static const char *mxs_get_group_name(struct pinctrl_dev *pctldev,
+				      unsigned group)
+{
+	struct mxs_pinctrl_data *d = pinctrl_dev_get_drvdata(pctldev);
+
+	return d->soc->groups[group].name;
+}
+
+static int mxs_get_group_pins(struct pinctrl_dev *pctldev, unsigned group,
+			      const unsigned **pins, unsigned *num_pins)
+{
+	struct mxs_pinctrl_data *d = pinctrl_dev_get_drvdata(pctldev);
+
+	*pins = d->soc->groups[group].pins;
+	*num_pins = d->soc->groups[group].npins;
+
+	return 0;
+}
+
+static void mxs_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
+			     unsigned offset)
+{
+	seq_printf(s, " %s", dev_name(pctldev->dev));
+}
+
+static int mxs_dt_node_to_map(struct pinctrl_dev *pctldev,
+			      struct device_node *np,
+			      struct pinctrl_map **map, unsigned *num_maps)
+{
+	struct pinctrl_map *new_map;
+	char *group;
+	unsigned new_num;
+	unsigned long config = 0;
+	unsigned long *pconfig;
+	int length = strlen(np->name) + SUFFIX_LEN;
+	u32 val;
+	int ret;
+
+	ret = of_property_read_u32(np, "fsl,drive-strength", &val);
+	if (!ret)
+		config = val | MA_PRESENT;
+	ret = of_property_read_u32(np, "fsl,voltage", &val);
+	if (!ret)
+		config |= val << VOL_SHIFT | VOL_PRESENT;
+	ret = of_property_read_u32(np, "fsl,pull-up", &val);
+	if (!ret)
+		config |= val << PULL_SHIFT | PULL_PRESENT;
+
+	new_num = config ? 2 : 1;
+	new_map = kzalloc(sizeof(*new_map) * new_num, GFP_KERNEL);
+	if (!new_map)
+		return -ENOMEM;
+
+	new_map[0].type = PIN_MAP_TYPE_MUX_GROUP;
+	new_map[0].data.mux.function = np->name;
+
+	/* Compose group name */
+	group = kzalloc(length, GFP_KERNEL);
+	if (!group)
+		return -ENOMEM;
+	of_property_read_u32(np, "reg", &val);
+	snprintf(group, length, "%s.%d", np->name, val);
+	new_map[0].data.mux.group = group;
+
+	if (config) {
+		pconfig = kmemdup(&config, sizeof(config), GFP_KERNEL);
+		if (!pconfig) {
+			ret = -ENOMEM;
+			goto free;
+		}
+
+		new_map[1].type = PIN_MAP_TYPE_CONFIGS_GROUP;
+		new_map[1].data.configs.group_or_pin = group;
+		new_map[1].data.configs.configs = pconfig;
+		new_map[1].data.configs.num_configs = 1;
+	}
+
+	*map = new_map;
+	*num_maps = new_num;
+
+	return 0;
+
+free:
+	kfree(new_map);
+	return ret;
+}
+
+static void mxs_dt_free_map(struct pinctrl_dev *pctldev,
+			    struct pinctrl_map *map, unsigned num_maps)
+{
+	int i;
+
+	for (i = 0; i < num_maps; i++) {
+		if (map[i].type == PIN_MAP_TYPE_MUX_GROUP)
+			kfree(map[i].data.mux.group);
+		if (map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP)
+			kfree(map[i].data.configs.configs);
+	}
+
+	kfree(map);
+}
+
+static struct pinctrl_ops mxs_pinctrl_ops = {
+	.get_groups_count = mxs_get_groups_count,
+	.get_group_name = mxs_get_group_name,
+	.get_group_pins = mxs_get_group_pins,
+	.pin_dbg_show = mxs_pin_dbg_show,
+	.dt_node_to_map = mxs_dt_node_to_map,
+	.dt_free_map = mxs_dt_free_map,
+};
+
+static int mxs_pinctrl_get_funcs_count(struct pinctrl_dev *pctldev)
+{
+	struct mxs_pinctrl_data *d = pinctrl_dev_get_drvdata(pctldev);
+
+	return d->soc->nfunctions;
+}
+
+static const char *mxs_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
+					     unsigned function)
+{
+	struct mxs_pinctrl_data *d = pinctrl_dev_get_drvdata(pctldev);
+
+	return d->soc->functions[function].name;
+}
+
+static int mxs_pinctrl_get_func_groups(struct pinctrl_dev *pctldev,
+				       unsigned group,
+				       const char * const **groups,
+				       unsigned * const num_groups)
+{
+	struct mxs_pinctrl_data *d = pinctrl_dev_get_drvdata(pctldev);
+
+	*groups = d->soc->functions[group].groups;
+	*num_groups = d->soc->functions[group].ngroups;
+
+	return 0;
+}
+
+static int mxs_pinctrl_enable(struct pinctrl_dev *pctldev, unsigned selector,
+			      unsigned group)
+{
+	struct mxs_pinctrl_data *d = pinctrl_dev_get_drvdata(pctldev);
+	struct mxs_group *g = &d->soc->groups[group];
+	void __iomem *reg;
+	u8 bank, shift;
+	u16 pin;
+	int i;
+
+	for (i = 0; i < g->npins; i++) {
+		bank = PINID_TO_BANK(g->pins[i]);
+		pin = PINID_TO_PIN(g->pins[i]);
+		reg = d->base + d->soc->regs->muxsel;
+		reg += bank * 0x20 + pin / 16 * 0x10;
+		shift = pin % 16 * 2;
+
+		writel(0x3 << shift, reg + CLR);
+		writel(g->muxsel[i] << shift, reg + SET);
+	}
+
+	return 0;
+}
+
+static void mxs_pinctrl_disable(struct pinctrl_dev *pctldev,
+				unsigned function, unsigned group)
+{
+	/* Nothing to do here */
+}
+
+static struct pinmux_ops mxs_pinmux_ops = {
+	.get_functions_count = mxs_pinctrl_get_funcs_count,
+	.get_function_name = mxs_pinctrl_get_func_name,
+	.get_function_groups = mxs_pinctrl_get_func_groups,
+	.enable = mxs_pinctrl_enable,
+	.disable = mxs_pinctrl_disable,
+};
+
+static int mxs_pinconf_get(struct pinctrl_dev *pctldev,
+			   unsigned pin, unsigned long *config)
+{
+	return -ENOTSUPP;
+}
+
+static int mxs_pinconf_set(struct pinctrl_dev *pctldev,
+			   unsigned pin, unsigned long config)
+{
+	return -ENOTSUPP;
+}
+
+static int mxs_pinconf_group_get(struct pinctrl_dev *pctldev,
+				 unsigned group, unsigned long *config)
+{
+	struct mxs_pinctrl_data *d = pinctrl_dev_get_drvdata(pctldev);
+
+	*config = d->soc->groups[group].config;
+
+	return 0;
+}
+
+static int mxs_pinconf_group_set(struct pinctrl_dev *pctldev,
+				 unsigned group, unsigned long config)
+{
+	struct mxs_pinctrl_data *d = pinctrl_dev_get_drvdata(pctldev);
+	struct mxs_group *g = &d->soc->groups[group];
+	void __iomem *reg;
+	u8 ma, vol, pull, bank, shift;
+	u16 pin;
+	int i;
+
+	ma = CONFIG_TO_MA(config);
+	vol = CONFIG_TO_VOL(config);
+	pull = CONFIG_TO_PULL(config);
+
+	for (i = 0; i < g->npins; i++) {
+		bank = PINID_TO_BANK(g->pins[i]);
+		pin = PINID_TO_PIN(g->pins[i]);
+
+		/* drive */
+		reg = d->base + d->soc->regs->drive;
+		reg += bank * 0x40 + pin / 8 * 0x10;
+
+		/* mA */
+		if (config & MA_PRESENT) {
+			shift = pin % 8 * 4;
+			writel(0x3 << shift, reg + CLR);
+			writel(ma << shift, reg + SET);
+		}
+
+		/* vol */
+		if (config & VOL_PRESENT) {
+			shift = pin % 8 * 4 + 2;
+			if (vol)
+				writel(1 << shift, reg + SET);
+			else
+				writel(1 << shift, reg + CLR);
+		}
+
+		/* pull */
+		if (config & PULL_PRESENT) {
+			reg = d->base + d->soc->regs->pull;
+			reg += bank * 0x10;
+			shift = pin;
+			if (pull)
+				writel(1 << shift, reg + SET);
+			else
+				writel(1 << shift, reg + CLR);
+		}
+	}
+
+	/* cache the config value for mxs_pinconf_group_get() */
+	g->config = config;
+
+	return 0;
+}
+
+static void mxs_pinconf_dbg_show(struct pinctrl_dev *pctldev,
+				 struct seq_file *s, unsigned pin)
+{
+	/* Not support */
+}
+
+static void mxs_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
+				       struct seq_file *s, unsigned group)
+{
+	unsigned long config;
+
+	if (!mxs_pinconf_group_get(pctldev, group, &config))
+		seq_printf(s, "0x%lx", config);
+}
+
+struct pinconf_ops mxs_pinconf_ops = {
+	.pin_config_get = mxs_pinconf_get,
+	.pin_config_set = mxs_pinconf_set,
+	.pin_config_group_get = mxs_pinconf_group_get,
+	.pin_config_group_set = mxs_pinconf_group_set,
+	.pin_config_dbg_show = mxs_pinconf_dbg_show,
+	.pin_config_group_dbg_show = mxs_pinconf_group_dbg_show,
+};
+
+static struct pinctrl_desc mxs_pinctrl_desc = {
+	.pctlops = &mxs_pinctrl_ops,
+	.pmxops = &mxs_pinmux_ops,
+	.confops = &mxs_pinconf_ops,
+	.owner = THIS_MODULE,
+};
+
+static int __devinit mxs_pinctrl_parse_group(struct platform_device *pdev,
+					     struct device_node *np, int idx,
+					     const char **out_name)
+{
+	struct mxs_pinctrl_data *d = platform_get_drvdata(pdev);
+	struct mxs_group *g = &d->soc->groups[idx];
+	struct property *prop;
+	const char *propname = "fsl,pinmux-ids";
+	char *group;
+	int length = strlen(np->name) + SUFFIX_LEN;
+	int i;
+	u32 val;
+
+	group = devm_kzalloc(&pdev->dev, length, GFP_KERNEL);
+	if (!group)
+		return -ENOMEM;
+	of_property_read_u32(np, "reg", &val);
+	snprintf(group, length, "%s.%d", np->name, val);
+	g->name = group;
+
+	prop = of_find_property(np, propname, &length);
+	if (!prop)
+		return -EINVAL;
+	g->npins = length / sizeof(u32);
+
+	g->pins = devm_kzalloc(&pdev->dev, g->npins * sizeof(*g->pins),
+			       GFP_KERNEL);
+	if (!g->pins)
+		return -ENOMEM;
+
+	g->muxsel = devm_kzalloc(&pdev->dev, g->npins * sizeof(*g->muxsel),
+				 GFP_KERNEL);
+	if (!g->muxsel)
+		return -ENOMEM;
+
+	of_property_read_u32_array(np, propname, g->pins, g->npins);
+	for (i = 0; i < g->npins; i++) {
+		g->muxsel[i] = MUXID_TO_MUXSEL(g->pins[i]);
+		g->pins[i] = MUXID_TO_PINID(g->pins[i]);
+	}
+
+	*out_name = g->name;
+
+	return 0;
+}
+
+static int __devinit mxs_pinctrl_probe_dt(struct platform_device *pdev,
+					  struct mxs_pinctrl_data *d)
+{
+	struct mxs_pinctrl_soc_data *soc = d->soc;
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *child;
+	struct mxs_function *f;
+	const char *fn, *fnull = "";
+	int i = 0, idxf = 0, idxg = 0;
+	int ret;
+	u32 val;
+
+	child = of_get_next_child(np, NULL);
+	if (!child) {
+		dev_err(&pdev->dev, "no group is defined\n");
+		return -ENOENT;
+	}
+
+	/* Count total functions and groups */
+	fn = fnull;
+	for_each_child_of_node(np, child) {
+		/* Skip pure pinconf node */
+		if (of_property_read_u32(child, "reg", &val))
+			continue;
+		if (strcmp(fn, child->name)) {
+			fn = child->name;
+			soc->nfunctions++;
+		}
+		soc->ngroups++;
+	}
+
+	soc->functions = devm_kzalloc(&pdev->dev, soc->nfunctions *
+				      sizeof(*soc->functions), GFP_KERNEL);
+	if (!soc->functions)
+		return -ENOMEM;
+
+	soc->groups = devm_kzalloc(&pdev->dev, soc->ngroups *
+				   sizeof(*soc->groups), GFP_KERNEL);
+	if (!soc->groups)
+		return -ENOMEM;
+
+	/* Count groups for each function */
+	fn = fnull;
+	f = &soc->functions[idxf];
+	for_each_child_of_node(np, child) {
+		if (of_property_read_u32(child, "reg", &val))
+			continue;
+		if (strcmp(fn, child->name)) {
+			f = &soc->functions[idxf++];
+			f->name = fn = child->name;
+		}
+		f->ngroups++;
+	};
+
+	/* Get groups for each function */
+	idxf = 0;
+	fn = fnull;
+	for_each_child_of_node(np, child) {
+		if (of_property_read_u32(child, "reg", &val))
+			continue;
+		if (strcmp(fn, child->name)) {
+			f = &soc->functions[idxf++];
+			f->groups = devm_kzalloc(&pdev->dev, f->ngroups *
+						 sizeof(*f->groups),
+						 GFP_KERNEL);
+			if (!f->groups)
+				return -ENOMEM;
+			fn = child->name;
+			i = 0;
+		}
+		ret = mxs_pinctrl_parse_group(pdev, child, idxg++,
+					      &f->groups[i++]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+int __devinit mxs_pinctrl_probe(struct platform_device *pdev,
+				struct mxs_pinctrl_soc_data *soc)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct mxs_pinctrl_data *d;
+	int ret;
+
+	d = devm_kzalloc(&pdev->dev, sizeof(*d), GFP_KERNEL);
+	if (!d)
+		return -ENOMEM;
+
+	d->dev = &pdev->dev;
+	d->soc = soc;
+
+	d->base = of_iomap(np, 0);
+	if (!d->base)
+		return -EADDRNOTAVAIL;
+
+	mxs_pinctrl_desc.pins = d->soc->pins;
+	mxs_pinctrl_desc.npins = d->soc->npins;
+	mxs_pinctrl_desc.name = dev_name(&pdev->dev);
+
+	platform_set_drvdata(pdev, d);
+
+	ret = mxs_pinctrl_probe_dt(pdev, d);
+	if (ret) {
+		dev_err(&pdev->dev, "dt probe failed: %d\n", ret);
+		goto err;
+	}
+
+	d->pctl = pinctrl_register(&mxs_pinctrl_desc, &pdev->dev, d);
+	if (!d->pctl) {
+		dev_err(&pdev->dev, "Couldn't register MXS pinctrl driver\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	return 0;
+
+err:
+	iounmap(d->base);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mxs_pinctrl_probe);
+
+int __devexit mxs_pinctrl_remove(struct platform_device *pdev)
+{
+	struct mxs_pinctrl_data *d = platform_get_drvdata(pdev);
+
+	pinctrl_unregister(d->pctl);
+	iounmap(d->base);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mxs_pinctrl_remove);
diff --git a/drivers/pinctrl/pinctrl-mxs.h b/drivers/pinctrl/pinctrl-mxs.h
new file mode 100644
index 000000000000..fdd88d0bae22
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-mxs.h
@@ -0,0 +1,91 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __PINCTRL_MXS_H
+#define __PINCTRL_MXS_H
+
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#define SET	0x4
+#define CLR	0x8
+#define TOG	0xc
+
+#define MXS_PINCTRL_PIN(pin)	PINCTRL_PIN(pin, #pin)
+#define PINID(bank, pin)	((bank) * 32 + (pin))
+
+/*
+ * pinmux-id bit field definitions
+ *
+ * bank:	15..12	(4)
+ * pin:		11..4	(8)
+ * muxsel:	3..0	(4)
+ */
+#define MUXID_TO_PINID(m)	PINID((m) >> 12 & 0xf, (m) >> 4 & 0xff)
+#define MUXID_TO_MUXSEL(m)	((m) & 0xf)
+
+#define PINID_TO_BANK(p)	((p) >> 5)
+#define PINID_TO_PIN(p)		((p) % 32)
+
+/*
+ * pin config bit field definitions
+ *
+ * pull-up:	6..5	(2)
+ * voltage:	4..3	(2)
+ * mA:		2..0	(3)
+ *
+ * MSB of each field is presence bit for the config.
+ */
+#define PULL_PRESENT		(1 << 6)
+#define PULL_SHIFT		5
+#define VOL_PRESENT		(1 << 4)
+#define VOL_SHIFT		3
+#define MA_PRESENT		(1 << 2)
+#define MA_SHIFT		0
+#define CONFIG_TO_PULL(c)	((c) >> PULL_SHIFT & 0x1)
+#define CONFIG_TO_VOL(c)	((c) >> VOL_SHIFT & 0x1)
+#define CONFIG_TO_MA(c)		((c) >> MA_SHIFT & 0x3)
+
+struct mxs_function {
+	const char *name;
+	const char **groups;
+	unsigned ngroups;
+};
+
+struct mxs_group {
+	const char *name;
+	unsigned int *pins;
+	unsigned npins;
+	u8 *muxsel;
+	u8 config;
+};
+
+struct mxs_regs {
+	u16 muxsel;
+	u16 drive;
+	u16 pull;
+};
+
+struct mxs_pinctrl_soc_data {
+	const struct mxs_regs *regs;
+	const struct pinctrl_pin_desc *pins;
+	unsigned npins;
+	struct mxs_function *functions;
+	unsigned nfunctions;
+	struct mxs_group *groups;
+	unsigned ngroups;
+};
+
+int mxs_pinctrl_probe(struct platform_device *pdev,
+		      struct mxs_pinctrl_soc_data *soc);
+int mxs_pinctrl_remove(struct platform_device *pdev);
+
+#endif /* __PINCTRL_MXS_H */