diff options
author | Olof Johansson <olof@lixom.net> | 2017-08-30 07:25:07 +0200 |
---|---|---|
committer | Olof Johansson <olof@lixom.net> | 2017-08-30 07:25:07 +0200 |
commit | 1df295087079e2c87cc52e8aa3c6c87c62e88895 (patch) | |
tree | dae0f4f93fbf28b3ae0f6d2ddb9ba4d394131604 | |
parent | Merge tag 'mvebu-dt64-4.14-3' of git://git.infradead.org/linux-mvebu into nex... (diff) | |
parent | ARM64: dts: meson-gxl-libretech-cc: Add GPIO lines names (diff) | |
download | linux-1df295087079e2c87cc52e8aa3c6c87c62e88895.tar.xz linux-1df295087079e2c87cc52e8aa3c6c87c62e88895.zip |
Merge tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt64
Amlogic 64-bit DT updates for v4.14, round 2
- clock updates w/dependencies on clock tree
- GPIO names updates
* tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM64: dts: meson-gxl-libretech-cc: Add GPIO lines names
ARM64: dts: meson-gx: Add AO CEC nodes
ARM64: dts: meson-gx: update AO clkc to new bindings
dt-bindings: clock: gxbb-aoclk: Add CEC 32k clock
clk: meson: gxbb: Add sd_emmc clk0 clkids
clk: meson-gxbb: expose almost every clock in the bindings
clk: meson8b: expose every clock in the bindings
clk: meson: gxbb: fix protection against undefined clks
clk: meson: meson8b: fix protection against undefined clks
dt-bindings: clock: meson8b: describe the embedded reset controller
Signed-off-by: Olof Johansson <olof@lixom.net>
23 files changed, 354 insertions, 217 deletions
diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt index 606da38c0959..c858fd64f680 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt @@ -16,18 +16,25 @@ Required Properties: mapped region. - #clock-cells: should be 1. +- #reset-cells: should be 1. Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. All available clocks are defined as preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be used in device tree sources. +Similarly a preprocessor macro for each reset line is defined in +dt-bindings/reset/amlogic,meson8b-clkc-reset.h (which can be used from the +device tree sources). + + Example: Clock controller node: clkc: clock-controller@c1104000 { - #clock-cells = <1>; compatible = "amlogic,meson8b-clkc"; reg = <0xc1108000 0x4>, <0xc1104000 0x460>; + #clock-cells = <1>; + #reset-cells = <1>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index dc478d094c11..c89010e56488 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -121,6 +121,13 @@ }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 8814708947fc..f175db846286 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -367,11 +367,21 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>; - clkc_AO: clock-controller@040 { - compatible = "amlogic,gx-aoclkc", "amlogic,gxbb-aoclkc"; - reg = <0x0 0x00040 0x0 0x4>; - #clock-cells = <1>; - #reset-cells = <1>; + sysctrl_AO: sys-ctrl@0 { + compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"; + reg = <0x0 0x0 0x0 0x100>; + + clkc_AO: clock-controller { + compatible = "amlogic,meson-gx-aoclkc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; + + cec_AO: cec@100 { + compatible = "amlogic,meson-gx-ao-cec"; + reg = <0x0 0x00100 0x0 0x14>; + interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>; }; sec_AO: ao-secure@140 { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index a1078b3e1c76..9c59c3c6d1b6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -171,6 +171,13 @@ }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + ðmac { status = "okay"; pinctrl-0 = <ð_rmii_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index 58b32f272a0e..81ffc689a5bf 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -151,6 +151,13 @@ }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts index e76ac313fef9..f7144fd5e03f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts @@ -108,6 +108,12 @@ }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; &cvbs_vdac_port { cvbs_vdac_out: endpoint { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index ea53cc248ef4..52f1687e7a09 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -307,6 +307,15 @@ }; }; +&cec_AO { + clocks = <&clkc_AO CLKID_AO_CEC_32K>; + clock-names = "core"; +}; + +&clkc_AO { + compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc"; +}; + ðmac { clocks = <&clkc CLKID_ETH>, <&clkc CLKID_FCLK_DIV2>, diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts index 3e0c023d6abd..6827f235d7cf 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts @@ -97,6 +97,13 @@ }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + /* P230 has exclusive choice between internal or external PHY */ ðmac { pinctrl-0 = <ð_pins>; @@ -124,7 +131,6 @@ }; }; - &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index 9b66220dea81..edc512ad0bac 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -67,6 +67,13 @@ }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 266fbcf3e47f..69ca14ac10fa 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -101,6 +101,13 @@ }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; @@ -129,6 +136,63 @@ }; }; +&pinctrl_aobus { + gpio-line-names = "UART TX", + "UART RX", + "Blue LED", + "SDCard Voltage Switch", + "7J1 Header Pin5", + "7J1 Header Pin3", + "7J1 Header Pin12", + "IR In", + "9J3 Switch HDMI CEC/7J1 Header Pin11", + "7J1 Header Pin13"; +}; + +&pinctrl_periphs { + gpio-line-names = /* Bank GPIOZ */ + "", "", "", "", "", "", "", + "", "", "", "", "", "", "", + "Eth Link LED", "Eth Activity LED", + /* Bank GPIOH */ + "HDMI HPD", "HDMI SDA", "HDMI SCL", + "HDMI_5V_EN", "9J1 Header Pin2", + "Analog Audio Mute", + "2J3 Header Pin6", + "2J3 Header Pin5", + "2J3 Header Pin4", + "2J3 Header Pin3", + /* Bank BOOT */ + "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", + "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7", + "eMMC Clk", "eMMC Reset", "eMMC CMD", + "ALT BOOT MODE", "", "", "", "eMMC Data Strobe", + /* Bank CARD */ + "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD", + "SDCard D3", "SDCard D2", "SDCard Det", + /* Bank GPIODV */ + "", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", "", "", + "Green LED", "VCCK Enable", + "7J1 Header Pin27", "7J1 Header Pin28", + "VCCK Regulator", "VDDEE Regulator", + /* Bank GPIOX */ + "7J1 Header Pin22", "7J1 Header Pin26", + "7J1 Header Pin36", "7J1 Header Pin38", + "7J1 Header Pin40", "7J1 Header Pin37", + "7J1 Header Pin33", "7J1 Header Pin35", + "7J1 Header Pin19", "7J1 Header Pin21", + "7J1 Header Pin24", "7J1 Header Pin23", + "7J1 Header Pin8", "7J1 Header Pin10", + "7J1 Header Pin16", "7J1 Header Pin18", + "7J1 Header Pin32", "7J1 Header Pin29", + "7J1 Header Pin31", + /* Bank GPIOCLK */ + "7J1 Header Pin7", "", + /* GPIO_TEST_N */ + "7J1 Header Pin15"; +}; + /* SD card */ &sd_emmc_b { status = "okay"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts index 6633a5d8fdd3..4c2ac7650fcd 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts @@ -140,6 +140,13 @@ }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts index 6ab17c1eeefd..6e2bf858291c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts @@ -71,6 +71,13 @@ }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 9e674441fd90..d6876e64979e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -43,6 +43,7 @@ #include "meson-gx.dtsi" #include <dt-bindings/clock/gxbb-clkc.h> +#include <dt-bindings/clock/gxbb-aoclkc.h> #include <dt-bindings/gpio/meson-gxl-gpio.h> #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> @@ -207,6 +208,15 @@ }; }; +&cec_AO { + clocks = <&clkc_AO CLKID_AO_CEC_32K>; + clock-names = "core"; +}; + +&clkc_AO { + compatible = "amlogic,meson-gxl-aoclkc", "amlogic,meson-gx-aoclkc"; +}; + &hdmi_tx { compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; resets = <&reset RESET_HDMITX_CAPB3>, diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index 5f626d683088..9b10c5f4f8c0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -113,6 +113,13 @@ }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index fe451cce93e7..19a798d2ae2f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi @@ -117,6 +117,10 @@ }; }; +&clkc_AO { + compatible = "amlogic,meson-gxm-aoclkc", "amlogic,meson-gx-aoclkc"; +}; + &saradc { compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc"; }; diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c index a7ea5f3da89d..964489b39f6a 100644 --- a/drivers/clk/meson/gxbb.c +++ b/drivers/clk/meson/gxbb.c @@ -1188,6 +1188,7 @@ static struct clk_hw_onecell_data gxbb_hw_onecell_data = { [CLKID_32K_CLK] = &gxbb_32k_clk.hw, [CLKID_32K_CLK_SEL] = &gxbb_32k_clk_sel.hw, [CLKID_32K_CLK_DIV] = &gxbb_32k_clk_div.hw, + [NR_CLKS] = NULL, }, .num = NR_CLKS, }; @@ -1310,6 +1311,7 @@ static struct clk_hw_onecell_data gxl_hw_onecell_data = { [CLKID_32K_CLK] = &gxbb_32k_clk.hw, [CLKID_32K_CLK_SEL] = &gxbb_32k_clk_sel.hw, [CLKID_32K_CLK_DIV] = &gxbb_32k_clk_div.hw, + [NR_CLKS] = NULL, }, .num = NR_CLKS, }; diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h index d63e77e8433d..5b1d4b374d1c 100644 --- a/drivers/clk/meson/gxbb.h +++ b/drivers/clk/meson/gxbb.h @@ -167,130 +167,33 @@ * CLKID index values * * These indices are entirely contrived and do not map onto the hardware. - * Migrate them out of this header and into the DT header file when they need - * to be exposed to client nodes in DT: include/dt-bindings/clock/gxbb-clkc.h + * It has now been decided to expose everything by default in the DT header: + * include/dt-bindings/clock/gxbb-clkc.h. Only the clocks ids we don't want + * to expose, such as the internal muxes and dividers of composite clocks, + * will remain defined here. */ -#define CLKID_SYS_PLL 0 /* ID 1 is unused (it was used by the non-existing CLKID_CPUCLK before) */ -/* CLKID_HDMI_PLL */ -#define CLKID_FIXED_PLL 3 -/* CLKID_FCLK_DIV2 */ -/* CLKID_FCLK_DIV3 */ -/* CLKID_FCLK_DIV4 */ -#define CLKID_FCLK_DIV5 7 -#define CLKID_FCLK_DIV7 8 -/* CLKID_GP0_PLL */ #define CLKID_MPEG_SEL 10 #define CLKID_MPEG_DIV 11 -/* CLKID_CLK81 */ -#define CLKID_MPLL0 13 -#define CLKID_MPLL1 14 -/* CLKID_MPLL2 */ -#define CLKID_DDR 16 -#define CLKID_DOS 17 -#define CLKID_ISA 18 -#define CLKID_PL301 19 -#define CLKID_PERIPHS 20 -/* CLKID_SPICC */ -/* CLKID_I2C */ -/* #define CLKID_SAR_ADC */ -#define CLKID_SMART_CARD 24 -/* CLKID_RNG0 */ -/* CLKID_UART0 */ -#define CLKID_SDHC 27 -#define CLKID_STREAM 28 -#define CLKID_ASYNC_FIFO 29 -#define CLKID_SDIO 30 -#define CLKID_ABUF 31 -#define CLKID_HIU_IFACE 32 -#define CLKID_ASSIST_MISC 33 -/* CLKID_SPI */ -#define CLKID_I2S_SPDIF 35 -/* CLKID_ETH */ -#define CLKID_DEMUX 37 -/* CLKID_AIU_GLUE */ -/* CLKID_IEC958 */ -/* CLKID_I2S_OUT */ -#define CLKID_AMCLK 41 -#define CLKID_AIFIFO2 42 -#define CLKID_MIXER 43 -/* CLKID_MIXER_IFACE */ -#define CLKID_ADC 45 -#define CLKID_BLKMV 46 -/* CLKID_AIU */ -/* CLKID_UART1 */ -#define CLKID_G2D 49 -/* CLKID_USB0 */ -/* CLKID_USB1 */ -#define CLKID_RESET 52 -#define CLKID_NAND 53 -#define CLKID_DOS_PARSER 54 -/* CLKID_USB */ -#define CLKID_VDIN1 56 -#define CLKID_AHB_ARB0 57 -#define CLKID_EFUSE 58 -#define CLKID_BOOT_ROM 59 -#define CLKID_AHB_DATA_BUS 60 -#define CLKID_AHB_CTRL_BUS 61 -#define CLKID_HDMI_INTR_SYNC 62 -/* CLKID_HDMI_PCLK */ -/* CLKID_USB1_DDR_BRIDGE */ -/* CLKID_USB0_DDR_BRIDGE */ -#define CLKID_MMC_PCLK 66 -#define CLKID_DVIN 67 -/* CLKID_UART2 */ -/* #define CLKID_SANA */ -#define CLKID_VPU_INTR 70 -#define CLKID_SEC_AHB_AHB3_BRIDGE 71 -#define CLKID_CLK81_A53 72 -#define CLKID_VCLK2_VENCI0 73 -#define CLKID_VCLK2_VENCI1 74 -#define CLKID_VCLK2_VENCP0 75 -#define CLKID_VCLK2_VENCP1 76 -/* CLKID_GCLK_VENCI_INT0 */ -#define CLKID_GCLK_VENCI_INT 78 -#define CLKID_DAC_CLK 79 -/* CLKID_AOCLK_GATE */ -/* CLKID_IEC958_GATE */ -#define CLKID_ENC480P 82 -#define CLKID_RNG1 83 -#define CLKID_GCLK_VENCI_INT1 84 -#define CLKID_VCLK2_VENCLMCC 85 -#define CLKID_VCLK2_VENCL 86 -#define CLKID_VCLK_OTHER 87 -#define CLKID_EDP 88 -#define CLKID_AO_MEDIA_CPU 89 -#define CLKID_AO_AHB_SRAM 90 -#define CLKID_AO_AHB_BUS 91 -#define CLKID_AO_IFACE 92 -/* CLKID_AO_I2C */ -/* CLKID_SD_EMMC_A */ -/* CLKID_SD_EMMC_B */ -/* CLKID_SD_EMMC_C */ -/* CLKID_SAR_ADC_CLK */ -/* CLKID_SAR_ADC_SEL */ #define CLKID_SAR_ADC_DIV 99 -/* CLKID_MALI_0_SEL */ -#define CLKID_MALI_0_DIV 101 -/* CLKID_MALI_0 */ -/* CLKID_MALI_1_SEL */ -#define CLKID_MALI_1_DIV 104 -/* CLKID_MALI_1 */ -/* CLKID_MALI */ -/* CLKID_CTS_AMCLK */ +#define CLKID_MALI_0_DIV 101 +#define CLKID_MALI_1_DIV 104 #define CLKID_CTS_AMCLK_SEL 108 #define CLKID_CTS_AMCLK_DIV 109 -/* CLKID_CTS_MCLK_I958 */ #define CLKID_CTS_MCLK_I958_SEL 111 #define CLKID_CTS_MCLK_I958_DIV 112 -/* CLKID_CTS_I958 */ -#define CLKID_32K_CLK 114 #define CLKID_32K_CLK_SEL 115 #define CLKID_32K_CLK_DIV 116 +#define CLKID_SD_EMMC_A_CLK0_SEL 117 +#define CLKID_SD_EMMC_A_CLK0_DIV 118 +#define CLKID_SD_EMMC_B_CLK0_SEL 120 +#define CLKID_SD_EMMC_B_CLK0_DIV 121 +#define CLKID_SD_EMMC_C_CLK0_SEL 123 +#define CLKID_SD_EMMC_C_CLK0_DIV 124 -#define NR_CLKS 117 +#define NR_CLKS 126 -/* include the CLKIDs that have been made part of the stable DT binding */ +/* include the CLKIDs that have been made part of the DT binding */ #include <dt-bindings/clock/gxbb-clkc.h> #endif /* __GXBB_H */ diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c index 6ec512ad2598..cb60a516ca82 100644 --- a/drivers/clk/meson/meson8b.c +++ b/drivers/clk/meson/meson8b.c @@ -590,6 +590,7 @@ static struct clk_hw_onecell_data meson8b_hw_onecell_data = { [CLKID_MPLL0] = &meson8b_mpll0.hw, [CLKID_MPLL1] = &meson8b_mpll1.hw, [CLKID_MPLL2] = &meson8b_mpll2.hw, + [CLK_NR_CLKS] = NULL, }, .num = CLK_NR_CLKS, }; diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h index a687e02547dc..c139bb3273ca 100644 --- a/drivers/clk/meson/meson8b.h +++ b/drivers/clk/meson/meson8b.h @@ -60,107 +60,12 @@ * CLKID index values * * These indices are entirely contrived and do not map onto the hardware. - * Migrate them out of this header and into the DT header file when they need - * to be exposed to client nodes in DT: include/dt-bindings/clock/meson8b-clkc.h + * It has now been decided to expose everything by default in the DT header: + * include/dt-bindings/clock/gxbb-clkc.h. Only the clocks ids we don't want + * to expose, such as the internal muxes and dividers of composite clocks, + * will remain defined here. */ -/* CLKID_UNUSED */ -/* CLKID_XTAL */ -/* CLKID_PLL_FIXED */ -/* CLKID_PLL_VID */ -/* CLKID_PLL_SYS */ -/* CLKID_FCLK_DIV2 */ -/* CLKID_FCLK_DIV3 */ -/* CLKID_FCLK_DIV4 */ -/* CLKID_FCLK_DIV5 */ -/* CLKID_FCLK_DIV7 */ -/* CLKID_CLK81 */ -/* CLKID_MALI */ -/* CLKID_CPUCLK */ -/* CLKID_ZERO */ -/* CLKID_MPEG_SEL */ -/* CLKID_MPEG_DIV */ -#define CLKID_DDR 16 -#define CLKID_DOS 17 -#define CLKID_ISA 18 -#define CLKID_PL301 19 -#define CLKID_PERIPHS 20 -#define CLKID_SPICC 21 -#define CLKID_I2C 22 -/* #define CLKID_SAR_ADC */ -#define CLKID_SMART_CARD 24 -/* #define CLKID_RNG0 */ -#define CLKID_UART0 26 -#define CLKID_SDHC 27 -#define CLKID_STREAM 28 -#define CLKID_ASYNC_FIFO 29 -/* #define CLKID_SDIO */ -#define CLKID_ABUF 31 -#define CLKID_HIU_IFACE 32 -#define CLKID_ASSIST_MISC 33 -#define CLKID_SPI 34 -#define CLKID_I2S_SPDIF 35 -/* #define CLKID_ETH */ -#define CLKID_DEMUX 37 -#define CLKID_AIU_GLUE 38 -#define CLKID_IEC958 39 -#define CLKID_I2S_OUT 40 -#define CLKID_AMCLK 41 -#define CLKID_AIFIFO2 42 -#define CLKID_MIXER 43 -#define CLKID_MIXER_IFACE 44 -#define CLKID_ADC 45 -#define CLKID_BLKMV 46 -#define CLKID_AIU 47 -#define CLKID_UART1 48 -#define CLKID_G2D 49 -/* #define CLKID_USB0 */ -/* #define CLKID_USB1 */ -#define CLKID_RESET 52 -#define CLKID_NAND 53 -#define CLKID_DOS_PARSER 54 -/* #define CLKID_USB */ -#define CLKID_VDIN1 56 -#define CLKID_AHB_ARB0 57 -#define CLKID_EFUSE 58 -#define CLKID_BOOT_ROM 59 -#define CLKID_AHB_DATA_BUS 60 -#define CLKID_AHB_CTRL_BUS 61 -#define CLKID_HDMI_INTR_SYNC 62 -#define CLKID_HDMI_PCLK 63 -/* CLKID_USB1_DDR_BRIDGE */ -/* CLKID_USB0_DDR_BRIDGE */ -#define CLKID_MMC_PCLK 66 -#define CLKID_DVIN 67 -#define CLKID_UART2 68 -/* #define CLKID_SANA */ -#define CLKID_VPU_INTR 70 -#define CLKID_SEC_AHB_AHB3_BRIDGE 71 -#define CLKID_CLK81_A9 72 -#define CLKID_VCLK2_VENCI0 73 -#define CLKID_VCLK2_VENCI1 74 -#define CLKID_VCLK2_VENCP0 75 -#define CLKID_VCLK2_VENCP1 76 -#define CLKID_GCLK_VENCI_INT 77 -#define CLKID_GCLK_VENCP_INT 78 -#define CLKID_DAC_CLK 79 -#define CLKID_AOCLK_GATE 80 -#define CLKID_IEC958_GATE 81 -#define CLKID_ENC480P 82 -#define CLKID_RNG1 83 -#define CLKID_GCLK_VENCL_INT 84 -#define CLKID_VCLK2_VENCLMCC 85 -#define CLKID_VCLK2_VENCL 86 -#define CLKID_VCLK2_OTHER 87 -#define CLKID_EDP 88 -#define CLKID_AO_MEDIA_CPU 89 -#define CLKID_AO_AHB_SRAM 90 -#define CLKID_AO_AHB_BUS 91 -#define CLKID_AO_IFACE 92 -#define CLKID_MPLL0 93 -#define CLKID_MPLL1 94 -#define CLKID_MPLL2 95 - #define CLK_NR_CLKS 96 /* include the CLKIDs that have been made part of the stable DT binding */ diff --git a/include/dt-bindings/clock/gxbb-aoclkc.h b/include/dt-bindings/clock/gxbb-aoclkc.h index 31751482d13c..9d15e2221fdb 100644 --- a/include/dt-bindings/clock/gxbb-aoclkc.h +++ b/include/dt-bindings/clock/gxbb-aoclkc.h @@ -62,5 +62,6 @@ #define CLKID_AO_UART1 3 #define CLKID_AO_UART2 4 #define CLKID_AO_IR_BLASTER 5 +#define CLKID_AO_CEC_32K 6 #endif diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h index e3e9f7919c31..c04a76d8facf 100644 --- a/include/dt-bindings/clock/gxbb-clkc.h +++ b/include/dt-bindings/clock/gxbb-clkc.h @@ -5,37 +5,96 @@ #ifndef __GXBB_CLKC_H #define __GXBB_CLKC_H +#define CLKID_SYS_PLL 0 #define CLKID_HDMI_PLL 2 +#define CLKID_FIXED_PLL 3 #define CLKID_FCLK_DIV2 4 #define CLKID_FCLK_DIV3 5 #define CLKID_FCLK_DIV4 6 +#define CLKID_FCLK_DIV5 7 +#define CLKID_FCLK_DIV7 8 #define CLKID_GP0_PLL 9 #define CLKID_CLK81 12 +#define CLKID_MPLL0 13 +#define CLKID_MPLL1 14 #define CLKID_MPLL2 15 +#define CLKID_DDR 16 +#define CLKID_DOS 17 +#define CLKID_ISA 18 +#define CLKID_PL301 19 +#define CLKID_PERIPHS 20 #define CLKID_SPICC 21 #define CLKID_I2C 22 #define CLKID_SAR_ADC 23 +#define CLKID_SMART_CARD 24 #define CLKID_RNG0 25 #define CLKID_UART0 26 +#define CLKID_SDHC 27 +#define CLKID_STREAM 28 +#define CLKID_ASYNC_FIFO 29 +#define CLKID_SDIO 30 +#define CLKID_ABUF 31 +#define CLKID_HIU_IFACE 32 +#define CLKID_ASSIST_MISC 33 #define CLKID_SPI 34 #define CLKID_ETH 36 +#define CLKID_I2S_SPDIF 35 +#define CLKID_DEMUX 37 #define CLKID_AIU_GLUE 38 #define CLKID_IEC958 39 #define CLKID_I2S_OUT 40 +#define CLKID_AMCLK 41 +#define CLKID_AIFIFO2 42 +#define CLKID_MIXER 43 #define CLKID_MIXER_IFACE 44 +#define CLKID_ADC 45 +#define CLKID_BLKMV 46 #define CLKID_AIU 47 #define CLKID_UART1 48 +#define CLKID_G2D 49 #define CLKID_USB0 50 #define CLKID_USB1 51 +#define CLKID_RESET 52 +#define CLKID_NAND 53 +#define CLKID_DOS_PARSER 54 #define CLKID_USB 55 +#define CLKID_VDIN1 56 +#define CLKID_AHB_ARB0 57 +#define CLKID_EFUSE 58 +#define CLKID_BOOT_ROM 59 +#define CLKID_AHB_DATA_BUS 60 +#define CLKID_AHB_CTRL_BUS 61 +#define CLKID_HDMI_INTR_SYNC 62 #define CLKID_HDMI_PCLK 63 #define CLKID_USB1_DDR_BRIDGE 64 #define CLKID_USB0_DDR_BRIDGE 65 +#define CLKID_MMC_PCLK 66 +#define CLKID_DVIN 67 #define CLKID_UART2 68 #define CLKID_SANA 69 +#define CLKID_VPU_INTR 70 +#define CLKID_SEC_AHB_AHB3_BRIDGE 71 +#define CLKID_CLK81_A53 72 +#define CLKID_VCLK2_VENCI0 73 +#define CLKID_VCLK2_VENCI1 74 +#define CLKID_VCLK2_VENCP0 75 +#define CLKID_VCLK2_VENCP1 76 #define CLKID_GCLK_VENCI_INT0 77 +#define CLKID_GCLK_VENCI_INT 78 +#define CLKID_DAC_CLK 79 #define CLKID_AOCLK_GATE 80 #define CLKID_IEC958_GATE 81 +#define CLKID_ENC480P 82 +#define CLKID_RNG1 83 +#define CLKID_GCLK_VENCI_INT1 84 +#define CLKID_VCLK2_VENCLMCC 85 +#define CLKID_VCLK2_VENCL 86 +#define CLKID_VCLK_OTHER 87 +#define CLKID_EDP 88 +#define CLKID_AO_MEDIA_CPU 89 +#define CLKID_AO_AHB_SRAM 90 +#define CLKID_AO_AHB_BUS 91 +#define CLKID_AO_IFACE 92 #define CLKID_AO_I2C 93 #define CLKID_SD_EMMC_A 94 #define CLKID_SD_EMMC_B 95 @@ -50,5 +109,9 @@ #define CLKID_CTS_AMCLK 107 #define CLKID_CTS_MCLK_I958 110 #define CLKID_CTS_I958 113 +#define CLKID_32K_CLK 114 +#define CLKID_SD_EMMC_A_CLK0 119 +#define CLKID_SD_EMMC_B_CLK0 122 +#define CLKID_SD_EMMC_C_CLK0 125 #endif /* __GXBB_CLKC_H */ diff --git a/include/dt-bindings/clock/meson8b-clkc.h b/include/dt-bindings/clock/meson8b-clkc.h index e29227fb52a1..a9c0306330b6 100644 --- a/include/dt-bindings/clock/meson8b-clkc.h +++ b/include/dt-bindings/clock/meson8b-clkc.h @@ -21,15 +21,85 @@ #define CLKID_ZERO 13 #define CLKID_MPEG_SEL 14 #define CLKID_MPEG_DIV 15 +#define CLKID_DDR 16 +#define CLKID_DOS 17 +#define CLKID_ISA 18 +#define CLKID_PL301 19 +#define CLKID_PERIPHS 20 +#define CLKID_SPICC 21 +#define CLKID_I2C 22 #define CLKID_SAR_ADC 23 +#define CLKID_SMART_CARD 24 #define CLKID_RNG0 25 +#define CLKID_UART0 26 +#define CLKID_SDHC 27 +#define CLKID_STREAM 28 +#define CLKID_ASYNC_FIFO 29 #define CLKID_SDIO 30 +#define CLKID_ABUF 31 +#define CLKID_HIU_IFACE 32 +#define CLKID_ASSIST_MISC 33 +#define CLKID_SPI 34 +#define CLKID_I2S_SPDIF 35 #define CLKID_ETH 36 +#define CLKID_DEMUX 37 +#define CLKID_AIU_GLUE 38 +#define CLKID_IEC958 39 +#define CLKID_I2S_OUT 40 +#define CLKID_AMCLK 41 +#define CLKID_AIFIFO2 42 +#define CLKID_MIXER 43 +#define CLKID_MIXER_IFACE 44 +#define CLKID_ADC 45 +#define CLKID_BLKMV 46 +#define CLKID_AIU 47 +#define CLKID_UART1 48 +#define CLKID_G2D 49 #define CLKID_USB0 50 #define CLKID_USB1 51 +#define CLKID_RESET 52 +#define CLKID_NAND 53 +#define CLKID_DOS_PARSER 54 #define CLKID_USB 55 +#define CLKID_VDIN1 56 +#define CLKID_AHB_ARB0 57 +#define CLKID_EFUSE 58 +#define CLKID_BOOT_ROM 59 +#define CLKID_AHB_DATA_BUS 60 +#define CLKID_AHB_CTRL_BUS 61 +#define CLKID_HDMI_INTR_SYNC 62 +#define CLKID_HDMI_PCLK 63 #define CLKID_USB1_DDR_BRIDGE 64 #define CLKID_USB0_DDR_BRIDGE 65 +#define CLKID_MMC_PCLK 66 +#define CLKID_DVIN 67 +#define CLKID_UART2 68 #define CLKID_SANA 69 +#define CLKID_VPU_INTR 70 +#define CLKID_SEC_AHB_AHB3_BRIDGE 71 +#define CLKID_CLK81_A9 72 +#define CLKID_VCLK2_VENCI0 73 +#define CLKID_VCLK2_VENCI1 74 +#define CLKID_VCLK2_VENCP0 75 +#define CLKID_VCLK2_VENCP1 76 +#define CLKID_GCLK_VENCI_INT 77 +#define CLKID_GCLK_VENCP_INT 78 +#define CLKID_DAC_CLK 79 +#define CLKID_AOCLK_GATE 80 +#define CLKID_IEC958_GATE 81 +#define CLKID_ENC480P 82 +#define CLKID_RNG1 83 +#define CLKID_GCLK_VENCL_INT 84 +#define CLKID_VCLK2_VENCLMCC 85 +#define CLKID_VCLK2_VENCL 86 +#define CLKID_VCLK2_OTHER 87 +#define CLKID_EDP 88 +#define CLKID_AO_MEDIA_CPU 89 +#define CLKID_AO_AHB_SRAM 90 +#define CLKID_AO_AHB_BUS 91 +#define CLKID_AO_IFACE 92 +#define CLKID_MPLL0 93 +#define CLKID_MPLL1 94 +#define CLKID_MPLL2 95 #endif /* __MESON8B_CLKC_H */ diff --git a/include/dt-bindings/reset/amlogic,meson8b-clkc-reset.h b/include/dt-bindings/reset/amlogic,meson8b-clkc-reset.h new file mode 100644 index 000000000000..1f1b56e57346 --- /dev/null +++ b/include/dt-bindings/reset/amlogic,meson8b-clkc-reset.h @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>. + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +#ifndef _DT_BINDINGS_AMLOGIC_MESON8B_CLKC_RESET_H +#define _DT_BINDINGS_AMLOGIC_MESON8B_CLKC_RESET_H + +#define CLKC_RESET_L2_CACHE_SOFT_RESET 0 +#define CLKC_RESET_AXI_64_TO_128_BRIDGE_A5_SOFT_RESET 1 +#define CLKC_RESET_SCU_SOFT_RESET 2 +#define CLKC_RESET_CPU0_SOFT_RESET 3 +#define CLKC_RESET_CPU1_SOFT_RESET 4 +#define CLKC_RESET_CPU2_SOFT_RESET 5 +#define CLKC_RESET_CPU3_SOFT_RESET 6 +#define CLKC_RESET_A5_GLOBAL_RESET 7 +#define CLKC_RESET_A5_AXI_SOFT_RESET 8 +#define CLKC_RESET_A5_ABP_SOFT_RESET 9 +#define CLKC_RESET_AXI_64_TO_128_BRIDGE_MMC_SOFT_RESET 10 +#define CLKC_RESET_VID_CLK_CNTL_SOFT_RESET 11 +#define CLKC_RESET_VID_DIVIDER_CNTL_SOFT_RESET_POST 12 +#define CLKC_RESET_VID_DIVIDER_CNTL_SOFT_RESET_PRE 13 +#define CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_POST 14 +#define CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_PRE 15 + +#endif /* _DT_BINDINGS_AMLOGIC_MESON8B_CLKC_RESET_H */ |