Merge tag 'cxl-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull initial support for CXL (Compute Express Link) from Dan Williams:
 "Introduce an initial driver for CXL 2.0 Type-3 Memory Devices.

  CXL is Compute Express Link which released the 2.0 specification in
  November. The Linux relevant changes in CXL 2.0 are support for an OS
  to dynamically assign address space to memory devices, support for
  switches, persistent memory, and hotplug.

  A Type-3 Memory Device is a PCI enumerated device presenting the CXL
  Memory Device Class Code and implementing the CXL.mem protocol.
  CXL.mem allows device to advertise CPU and I/O coherent memory to the
  system, i.e. typical "System RAM" and "Persistent Memory" in Linux
  /proc/iomem terms.

  In addition to the CXL.mem fast path there is an administrative
  command hardware mailbox interface for maintenance and provisioning.
  It is this command interface that is the focus of the initial driver.
  With this driver a CXL device that is mapped by the BIOS can be
  administered by Linux.

  Linux support for CXL PMEM and dynamic CXL address space management
  are to be implemented post v5.12"

Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
  4cdadfd5e0a7 ("cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpoints")
  13237183c735 ("cxl/mem: Add a "RAW" send command")
  472b1ce6e9d6 ("cxl/mem: Enable commands via CEL")
  57ee605b976c ("cxl/mem: Add set of informational commands")

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
  8adaf747c9f0 ("cxl/mem: Find device capabilities")
  b39cb1052a5c ("cxl/mem: Register CXL memX devices")

* tag 'cxl-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  cxl/mem: Fix potential memory leak
  cxl/mem: Return -EFAULT if copy_to_user() fails
  MAINTAINERS: Add maintainers of the CXL driver
  cxl/mem: Add set of informational commands
  cxl/mem: Enable commands via CEL
  cxl/mem: Add a "RAW" send command
  cxl/mem: Add basic IOCTL interface
  cxl/mem: Register CXL memX devices
  cxl/mem: Find device capabilities
  cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpoints

17 files changed, 2040 insertions, 0 deletions

diff --git a/.clang-format b/.clang-format
index 01a341ceec6c..c24b147cac01 100644
--- a/.clang-format
+++ b/.clang-format
@@ -109,6 +109,7 @@ ForEachMacros:
   - 'css_for_each_child'
   - 'css_for_each_descendant_post'
   - 'css_for_each_descendant_pre'
+  - 'cxl_for_each_cmd'
   - 'device_for_each_child_node'
   - 'dma_fence_chain_for_each'
   - 'do_for_each_ftrace_op'
diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl
new file mode 100644
index 000000000000..2fe7490ad6a8
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-cxl
@@ -0,0 +1,26 @@
+What:		/sys/bus/cxl/devices/memX/firmware_version
+Date:		December, 2020
+KernelVersion:	v5.12
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RO) "FW Revision" string as reported by the Identify
+		Memory Device Output Payload in the CXL-2.0
+		specification.
+
+What:		/sys/bus/cxl/devices/memX/ram/size
+Date:		December, 2020
+KernelVersion:	v5.12
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RO) "Volatile Only Capacity" as bytes. Represents the
+		identically named field in the Identify Memory Device Output
+		Payload in the CXL-2.0 specification.
+
+What:		/sys/bus/cxl/devices/memX/pmem/size
+Date:		December, 2020
+KernelVersion:	v5.12
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RO) "Persistent Only Capacity" as bytes. Represents the
+		identically named field in the Identify Memory Device Output
+		Payload in the CXL-2.0 specification.
diff --git a/Documentation/driver-api/cxl/index.rst b/Documentation/driver-api/cxl/index.rst
new file mode 100644
index 000000000000..036e49553542
--- /dev/null
+++ b/Documentation/driver-api/cxl/index.rst
@@ -0,0 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================
+Compute Express Link
+====================
+
+.. toctree::
+   :maxdepth: 1
+
+   memory-devices
+
+.. only::  subproject and html
diff --git a/Documentation/driver-api/cxl/memory-devices.rst b/Documentation/driver-api/cxl/memory-devices.rst
new file mode 100644
index 000000000000..1bad466f9167
--- /dev/null
+++ b/Documentation/driver-api/cxl/memory-devices.rst
@@ -0,0 +1,46 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+===================================
+Compute Express Link Memory Devices
+===================================
+
+A Compute Express Link Memory Device is a CXL component that implements the
+CXL.mem protocol. It contains some amount of volatile memory, persistent memory,
+or both. It is enumerated as a PCI device for configuration and passing
+messages over an MMIO mailbox. Its contribution to the System Physical
+Address space is handled via HDM (Host Managed Device Memory) decoders
+that optionally define a device's contribution to an interleaved address
+range across multiple devices underneath a host-bridge or interleaved
+across host-bridges.
+
+Driver Infrastructure
+=====================
+
+This section covers the driver infrastructure for a CXL memory device.
+
+CXL Memory Device
+-----------------
+
+.. kernel-doc:: drivers/cxl/mem.c
+   :doc: cxl mem
+
+.. kernel-doc:: drivers/cxl/mem.c
+   :internal:
+
+CXL Bus
+-------
+.. kernel-doc:: drivers/cxl/bus.c
+   :doc: cxl bus
+
+External Interfaces
+===================
+
+CXL IOCTL Interface
+-------------------
+
+.. kernel-doc:: include/uapi/linux/cxl_mem.h
+   :doc: UAPI
+
+.. kernel-doc:: include/uapi/linux/cxl_mem.h
+   :internal:
diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst
index 9d9af54d68c5..9ba74e86751b 100644
--- a/Documentation/driver-api/index.rst
+++ b/Documentation/driver-api/index.rst
@@ -35,6 +35,7 @@ available subsections can be seen below.
    usb/index
    firewire
    pci/index
+   cxl/index
    spi
    i2c
    ipmb
diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst
index d02ba2f67df8..2fe16fb8c3af 100644
--- a/Documentation/userspace-api/ioctl/ioctl-number.rst
+++ b/Documentation/userspace-api/ioctl/ioctl-number.rst
@@ -353,6 +353,7 @@ Code  Seq#    Include File                                           Comments
                                                                      <mailto:michael.klein@puffin.lb.shuttle.de>
 0xCC  00-0F  drivers/misc/ibmvmc.h                                   pseries VMC driver
 0xCD  01     linux/reiserfs_fs.h
+0xCE  01-02  uapi/linux/cxl_mem.h                                    Compute Express Link Memory Devices
 0xCF  02     fs/cifs/ioctl.c
 0xDB  00-0F  drivers/char/mwave/mwavepub.h
 0xDD  00-3F                                                          ZFCP device driver see drivers/s390/scsi/
diff --git a/MAINTAINERS b/MAINTAINERS
index 1d75afad615f..39478550cd34 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4434,6 +4434,17 @@ M:	Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
 S:	Maintained
 F:	include/linux/compiler_attributes.h
 
+COMPUTE EXPRESS LINK (CXL)
+M:	Alison Schofield <alison.schofield@intel.com>
+M:	Vishal Verma <vishal.l.verma@intel.com>
+M:	Ira Weiny <ira.weiny@intel.com>
+M:	Ben Widawsky <ben.widawsky@intel.com>
+M:	Dan Williams <dan.j.williams@intel.com>
+L:	linux-cxl@vger.kernel.org
+S:	Maintained
+F:	drivers/cxl/
+F:	include/uapi/linux/cxl_mem.h
+
 CONEXANT ACCESSRUNNER USB DRIVER
 L:	accessrunner-general@lists.sourceforge.net
 S:	Orphan
diff --git a/drivers/Kconfig b/drivers/Kconfig
index dcecc9f6e33f..62c753a73651 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -6,6 +6,7 @@ menu "Device Drivers"
 source "drivers/amba/Kconfig"
 source "drivers/eisa/Kconfig"
 source "drivers/pci/Kconfig"
+source "drivers/cxl/Kconfig"
 source "drivers/pcmcia/Kconfig"
 source "drivers/rapidio/Kconfig"
 
diff --git a/drivers/Makefile b/drivers/Makefile
index fd11b9ac4cc3..678ea810410f 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -73,6 +73,7 @@ obj-$(CONFIG_NVM)		+= lightnvm/
 obj-y				+= base/ block/ misc/ mfd/ nfc/
 obj-$(CONFIG_LIBNVDIMM)		+= nvdimm/
 obj-$(CONFIG_DAX)		+= dax/
+obj-$(CONFIG_CXL_BUS)		+= cxl/
 obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf/
 obj-$(CONFIG_NUBUS)		+= nubus/
 obj-y				+= macintosh/
diff --git a/drivers/cxl/Kconfig b/drivers/cxl/Kconfig
new file mode 100644
index 000000000000..97dc4d751651
--- /dev/null
+++ b/drivers/cxl/Kconfig
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig CXL_BUS
+	tristate "CXL (Compute Express Link) Devices Support"
+	depends on PCI
+	help
+	  CXL is a bus that is electrically compatible with PCI Express, but
+	  layers three protocols on that signalling (CXL.io, CXL.cache, and
+	  CXL.mem). The CXL.cache protocol allows devices to hold cachelines
+	  locally, the CXL.mem protocol allows devices to be fully coherent
+	  memory targets, the CXL.io protocol is equivalent to PCI Express.
+	  Say 'y' to enable support for the configuration and management of
+	  devices supporting these protocols.
+
+if CXL_BUS
+
+config CXL_MEM
+	tristate "CXL.mem: Memory Devices"
+	help
+	  The CXL.mem protocol allows a device to act as a provider of
+	  "System RAM" and/or "Persistent Memory" that is fully coherent
+	  as if the memory was attached to the typical CPU memory
+	  controller.
+
+	  Say 'y/m' to enable a driver (named "cxl_mem.ko" when built as
+	  a module) that will attach to CXL.mem devices for
+	  configuration, provisioning, and health monitoring. This
+	  driver is required for dynamic provisioning of CXL.mem
+	  attached memory which is a prerequisite for persistent memory
+	  support. Typically volatile memory is mapped by platform
+	  firmware and included in the platform memory map, but in some
+	  cases the OS is responsible for mapping that memory. See
+	  Chapter 2.3 Type 3 CXL Device in the CXL 2.0 specification.
+
+	  If unsure say 'm'.
+
+config CXL_MEM_RAW_COMMANDS
+	bool "RAW Command Interface for Memory Devices"
+	depends on CXL_MEM
+	help
+	  Enable CXL RAW command interface.
+
+	  The CXL driver ioctl interface may assign a kernel ioctl command
+	  number for each specification defined opcode. At any given point in
+	  time the number of opcodes that the specification defines and a device
+	  may implement may exceed the kernel's set of associated ioctl function
+	  numbers. The mismatch is either by omission, specification is too new,
+	  or by design. When prototyping new hardware, or developing / debugging
+	  the driver it is useful to be able to submit any possible command to
+	  the hardware, even commands that may crash the kernel due to their
+	  potential impact to memory currently in use by the kernel.
+
+	  If developing CXL hardware or the driver say Y, otherwise say N.
+endif
diff --git a/drivers/cxl/Makefile b/drivers/cxl/Makefile
new file mode 100644
index 000000000000..a314a1891f4d
--- /dev/null
+++ b/drivers/cxl/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_CXL_BUS) += cxl_bus.o
+obj-$(CONFIG_CXL_MEM) += cxl_mem.o
+
+ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE=CXL
+cxl_bus-y := bus.o
+cxl_mem-y := mem.o
diff --git a/drivers/cxl/bus.c b/drivers/cxl/bus.c
new file mode 100644
index 000000000000..58f74796d525
--- /dev/null
+++ b/drivers/cxl/bus.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright(c) 2020 Intel Corporation. All rights reserved. */
+#include <linux/device.h>
+#include <linux/module.h>
+
+/**
+ * DOC: cxl bus
+ *
+ * The CXL bus provides namespace for control devices and a rendezvous
+ * point for cross-device interleave coordination.
+ */
+struct bus_type cxl_bus_type = {
+	.name = "cxl",
+};
+EXPORT_SYMBOL_GPL(cxl_bus_type);
+
+static __init int cxl_bus_init(void)
+{
+	return bus_register(&cxl_bus_type);
+}
+
+static void cxl_bus_exit(void)
+{
+	bus_unregister(&cxl_bus_type);
+}
+
+module_init(cxl_bus_init);
+module_exit(cxl_bus_exit);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
new file mode 100644
index 000000000000..6f14838c2d25
--- /dev/null
+++ b/drivers/cxl/cxl.h
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright(c) 2020 Intel Corporation. */
+
+#ifndef __CXL_H__
+#define __CXL_H__
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+
+/* CXL 2.0 8.2.8.1 Device Capabilities Array Register */
+#define CXLDEV_CAP_ARRAY_OFFSET 0x0
+#define   CXLDEV_CAP_ARRAY_CAP_ID 0
+#define   CXLDEV_CAP_ARRAY_ID_MASK GENMASK_ULL(15, 0)
+#define   CXLDEV_CAP_ARRAY_COUNT_MASK GENMASK_ULL(47, 32)
+/* CXL 2.0 8.2.8.2 CXL Device Capability Header Register */
+#define CXLDEV_CAP_HDR_CAP_ID_MASK GENMASK(15, 0)
+/* CXL 2.0 8.2.8.2.1 CXL Device Capabilities */
+#define CXLDEV_CAP_CAP_ID_DEVICE_STATUS 0x1
+#define CXLDEV_CAP_CAP_ID_PRIMARY_MAILBOX 0x2
+#define CXLDEV_CAP_CAP_ID_SECONDARY_MAILBOX 0x3
+#define CXLDEV_CAP_CAP_ID_MEMDEV 0x4000
+
+/* CXL 2.0 8.2.8.4 Mailbox Registers */
+#define CXLDEV_MBOX_CAPS_OFFSET 0x00
+#define   CXLDEV_MBOX_CAP_PAYLOAD_SIZE_MASK GENMASK(4, 0)
+#define CXLDEV_MBOX_CTRL_OFFSET 0x04
+#define   CXLDEV_MBOX_CTRL_DOORBELL BIT(0)
+#define CXLDEV_MBOX_CMD_OFFSET 0x08
+#define   CXLDEV_MBOX_CMD_COMMAND_OPCODE_MASK GENMASK_ULL(15, 0)
+#define   CXLDEV_MBOX_CMD_PAYLOAD_LENGTH_MASK GENMASK_ULL(36, 16)
+#define CXLDEV_MBOX_STATUS_OFFSET 0x10
+#define   CXLDEV_MBOX_STATUS_RET_CODE_MASK GENMASK_ULL(47, 32)
+#define CXLDEV_MBOX_BG_CMD_STATUS_OFFSET 0x18
+#define CXLDEV_MBOX_PAYLOAD_OFFSET 0x20
+
+/* CXL 2.0 8.2.8.5.1.1 Memory Device Status Register */
+#define CXLMDEV_STATUS_OFFSET 0x0
+#define   CXLMDEV_DEV_FATAL BIT(0)
+#define   CXLMDEV_FW_HALT BIT(1)
+#define   CXLMDEV_STATUS_MEDIA_STATUS_MASK GENMASK(3, 2)
+#define     CXLMDEV_MS_NOT_READY 0
+#define     CXLMDEV_MS_READY 1
+#define     CXLMDEV_MS_ERROR 2
+#define     CXLMDEV_MS_DISABLED 3
+#define CXLMDEV_READY(status)                                                  \
+	(FIELD_GET(CXLMDEV_STATUS_MEDIA_STATUS_MASK, status) ==                \
+	 CXLMDEV_MS_READY)
+#define   CXLMDEV_MBOX_IF_READY BIT(4)
+#define   CXLMDEV_RESET_NEEDED_MASK GENMASK(7, 5)
+#define     CXLMDEV_RESET_NEEDED_NOT 0
+#define     CXLMDEV_RESET_NEEDED_COLD 1
+#define     CXLMDEV_RESET_NEEDED_WARM 2
+#define     CXLMDEV_RESET_NEEDED_HOT 3
+#define     CXLMDEV_RESET_NEEDED_CXL 4
+#define CXLMDEV_RESET_NEEDED(status)                                           \
+	(FIELD_GET(CXLMDEV_RESET_NEEDED_MASK, status) !=                       \
+	 CXLMDEV_RESET_NEEDED_NOT)
+
+struct cxl_memdev;
+/**
+ * struct cxl_mem - A CXL memory device
+ * @pdev: The PCI device associated with this CXL device.
+ * @regs: IO mappings to the device's MMIO
+ * @status_regs: CXL 2.0 8.2.8.3 Device Status Registers
+ * @mbox_regs: CXL 2.0 8.2.8.4 Mailbox Registers
+ * @memdev_regs: CXL 2.0 8.2.8.5 Memory Device Registers
+ * @payload_size: Size of space for payload
+ *                (CXL 2.0 8.2.8.4.3 Mailbox Capabilities Register)
+ * @mbox_mutex: Mutex to synchronize mailbox access.
+ * @firmware_version: Firmware version for the memory device.
+ * @enabled_commands: Hardware commands found enabled in CEL.
+ * @pmem_range: Persistent memory capacity information.
+ * @ram_range: Volatile memory capacity information.
+ */
+struct cxl_mem {
+	struct pci_dev *pdev;
+	void __iomem *regs;
+	struct cxl_memdev *cxlmd;
+
+	void __iomem *status_regs;
+	void __iomem *mbox_regs;
+	void __iomem *memdev_regs;
+
+	size_t payload_size;
+	struct mutex mbox_mutex; /* Protects device mailbox and firmware */
+	char firmware_version[0x10];
+	unsigned long *enabled_cmds;
+
+	struct range pmem_range;
+	struct range ram_range;
+};
+
+extern struct bus_type cxl_bus_type;
+#endif /* __CXL_H__ */
diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c
new file mode 100644
index 000000000000..244cb7d89678
--- /dev/null
+++ b/drivers/cxl/mem.c
@@ -0,0 +1,1552 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright(c) 2020 Intel Corporation. All rights reserved. */
+#include <uapi/linux/cxl_mem.h>
+#include <linux/security.h>
+#include <linux/debugfs.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/cdev.h>
+#include <linux/idr.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include "pci.h"
+#include "cxl.h"
+
+/**
+ * DOC: cxl mem
+ *
+ * This implements a CXL memory device ("type-3") as it is defined by the
+ * Compute Express Link specification.
+ *
+ * The driver has several responsibilities, mainly:
+ *  - Create the memX device and register on the CXL bus.
+ *  - Enumerate device's register interface and map them.
+ *  - Probe the device attributes to establish sysfs interface.
+ *  - Provide an IOCTL interface to userspace to communicate with the device for
+ *    things like firmware update.
+ *  - Support management of interleave sets.
+ *  - Handle and manage error conditions.
+ */
+
+/*
+ * An entire PCI topology full of devices should be enough for any
+ * config
+ */
+#define CXL_MEM_MAX_DEVS 65536
+
+#define cxl_doorbell_busy(cxlm)                                                \
+	(readl((cxlm)->mbox_regs + CXLDEV_MBOX_CTRL_OFFSET) &                  \
+	 CXLDEV_MBOX_CTRL_DOORBELL)
+
+/* CXL 2.0 - 8.2.8.4 */
+#define CXL_MAILBOX_TIMEOUT_MS (2 * HZ)
+
+enum opcode {
+	CXL_MBOX_OP_INVALID		= 0x0000,
+	CXL_MBOX_OP_RAW			= CXL_MBOX_OP_INVALID,
+	CXL_MBOX_OP_GET_FW_INFO		= 0x0200,
+	CXL_MBOX_OP_ACTIVATE_FW		= 0x0202,
+	CXL_MBOX_OP_GET_SUPPORTED_LOGS	= 0x0400,
+	CXL_MBOX_OP_GET_LOG		= 0x0401,
+	CXL_MBOX_OP_IDENTIFY		= 0x4000,
+	CXL_MBOX_OP_GET_PARTITION_INFO	= 0x4100,
+	CXL_MBOX_OP_SET_PARTITION_INFO	= 0x4101,
+	CXL_MBOX_OP_GET_LSA		= 0x4102,
+	CXL_MBOX_OP_SET_LSA		= 0x4103,
+	CXL_MBOX_OP_GET_HEALTH_INFO	= 0x4200,
+	CXL_MBOX_OP_SET_SHUTDOWN_STATE	= 0x4204,
+	CXL_MBOX_OP_SCAN_MEDIA		= 0x4304,
+	CXL_MBOX_OP_GET_SCAN_MEDIA	= 0x4305,
+	CXL_MBOX_OP_MAX			= 0x10000
+};
+
+/**
+ * struct mbox_cmd - A command to be submitted to hardware.
+ * @opcode: (input) The command set and command submitted to hardware.
+ * @payload_in: (input) Pointer to the input payload.
+ * @payload_out: (output) Pointer to the output payload. Must be allocated by
+ *		 the caller.
+ * @size_in: (input) Number of bytes to load from @payload_in.
+ * @size_out: (input) Max number of bytes loaded into @payload_out.
+ *            (output) Number of bytes generated by the device. For fixed size
+ *            outputs commands this is always expected to be deterministic. For
+ *            variable sized output commands, it tells the exact number of bytes
+ *            written.
+ * @return_code: (output) Error code returned from hardware.
+ *
+ * This is the primary mechanism used to send commands to the hardware.
+ * All the fields except @payload_* correspond exactly to the fields described in
+ * Command Register section of the CXL 2.0 8.2.8.4.5. @payload_in and
+ * @payload_out are written to, and read from the Command Payload Registers
+ * defined in CXL 2.0 8.2.8.4.8.
+ */
+struct mbox_cmd {
+	u16 opcode;
+	void *payload_in;
+	void *payload_out;
+	size_t size_in;
+	size_t size_out;
+	u16 return_code;
+#define CXL_MBOX_SUCCESS 0
+};
+
+/**
+ * struct cxl_memdev - CXL bus object representing a Type-3 Memory Device
+ * @dev: driver core device object
+ * @cdev: char dev core object for ioctl operations
+ * @cxlm: pointer to the parent device driver data
+ * @ops_active: active user of @cxlm in ops handlers
+ * @ops_dead: completion when all @cxlm ops users have exited
+ * @id: id number of this memdev instance.
+ */
+struct cxl_memdev {
+	struct device dev;
+	struct cdev cdev;
+	struct cxl_mem *cxlm;
+	struct percpu_ref ops_active;
+	struct completion ops_dead;
+	int id;
+};
+
+static int cxl_mem_major;
+static DEFINE_IDA(cxl_memdev_ida);
+static struct dentry *cxl_debugfs;
+static bool cxl_raw_allow_all;
+
+enum {
+	CEL_UUID,
+	VENDOR_DEBUG_UUID,
+};
+
+/* See CXL 2.0 Table 170. Get Log Input Payload */
+static const uuid_t log_uuid[] = {
+	[CEL_UUID] = UUID_INIT(0xda9c0b5, 0xbf41, 0x4b78, 0x8f, 0x79, 0x96,
+			       0xb1, 0x62, 0x3b, 0x3f, 0x17),
+	[VENDOR_DEBUG_UUID] = UUID_INIT(0xe1819d9, 0x11a9, 0x400c, 0x81, 0x1f,
+					0xd6, 0x07, 0x19, 0x40, 0x3d, 0x86),
+};
+
+/**
+ * struct cxl_mem_command - Driver representation of a memory device command
+ * @info: Command information as it exists for the UAPI
+ * @opcode: The actual bits used for the mailbox protocol
+ * @flags: Set of flags effecting driver behavior.
+ *
+ *  * %CXL_CMD_FLAG_FORCE_ENABLE: In cases of error, commands with this flag
+ *    will be enabled by the driver regardless of what hardware may have
+ *    advertised.
+ *
+ * The cxl_mem_command is the driver's internal representation of commands that
+ * are supported by the driver. Some of these commands may not be supported by
+ * the hardware. The driver will use @info to validate the fields passed in by
+ * the user then submit the @opcode to the hardware.
+ *
+ * See struct cxl_command_info.
+ */
+struct cxl_mem_command {
+	struct cxl_command_info info;
+	enum opcode opcode;
+	u32 flags;
+#define CXL_CMD_FLAG_NONE 0
+#define CXL_CMD_FLAG_FORCE_ENABLE BIT(0)
+};
+
+#define CXL_CMD(_id, sin, sout, _flags)                                        \
+	[CXL_MEM_COMMAND_ID_##_id] = {                                         \
+	.info =	{                                                              \
+			.id = CXL_MEM_COMMAND_ID_##_id,                        \
+			.size_in = sin,                                        \
+			.size_out = sout,                                      \
+		},                                                             \
+	.opcode = CXL_MBOX_OP_##_id,                                           \
+	.flags = _flags,                                                       \
+	}
+
+/*
+ * This table defines the supported mailbox commands for the driver. This table
+ * is made up of a UAPI structure. Non-negative values as parameters in the
+ * table will be validated against the user's input. For example, if size_in is
+ * 0, and the user passed in 1, it is an error.
+ */
+static struct cxl_mem_command mem_commands[] = {
+	CXL_CMD(IDENTIFY, 0, 0x43, CXL_CMD_FLAG_FORCE_ENABLE),
+#ifdef CONFIG_CXL_MEM_RAW_COMMANDS
+	CXL_CMD(RAW, ~0, ~0, 0),
+#endif
+	CXL_CMD(GET_SUPPORTED_LOGS, 0, ~0, CXL_CMD_FLAG_FORCE_ENABLE),
+	CXL_CMD(GET_FW_INFO, 0, 0x50, 0),
+	CXL_CMD(GET_PARTITION_INFO, 0, 0x20, 0),
+	CXL_CMD(GET_LSA, 0x8, ~0, 0),
+	CXL_CMD(GET_HEALTH_INFO, 0, 0x12, 0),
+	CXL_CMD(GET_LOG, 0x18, ~0, CXL_CMD_FLAG_FORCE_ENABLE),
+};
+
+/*
+ * Commands that RAW doesn't permit. The rationale for each:
+ *
+ * CXL_MBOX_OP_ACTIVATE_FW: Firmware activation requires adjustment /
+ * coordination of transaction timeout values at the root bridge level.
+ *
+ * CXL_MBOX_OP_SET_PARTITION_INFO: The device memory map may change live
+ * and needs to be coordinated with HDM updates.
+ *
+ * CXL_MBOX_OP_SET_LSA: The label storage area may be cached by the
+ * driver and any writes from userspace invalidates those contents.
+ *
+ * CXL_MBOX_OP_SET_SHUTDOWN_STATE: Set shutdown state assumes no writes
+ * to the device after it is marked clean, userspace can not make that
+ * assertion.
+ *
+ * CXL_MBOX_OP_[GET_]SCAN_MEDIA: The kernel provides a native error list that
+ * is kept up to date with patrol notifications and error management.
+ */
+static u16 cxl_disabled_raw_commands[] = {
+	CXL_MBOX_OP_ACTIVATE_FW,
+	CXL_MBOX_OP_SET_PARTITION_INFO,
+	CXL_MBOX_OP_SET_LSA,
+	CXL_MBOX_OP_SET_SHUTDOWN_STATE,
+	CXL_MBOX_OP_SCAN_MEDIA,
+	CXL_MBOX_OP_GET_SCAN_MEDIA,
+};
+
+/*
+ * Command sets that RAW doesn't permit. All opcodes in this set are
+ * disabled because they pass plain text security payloads over the
+ * user/kernel boundary. This functionality is intended to be wrapped
+ * behind the keys ABI which allows for encrypted payloads in the UAPI
+ */
+static u8 security_command_sets[] = {
+	0x44, /* Sanitize */
+	0x45, /* Persistent Memory Data-at-rest Security */
+	0x46, /* Security Passthrough */
+};
+
+#define cxl_for_each_cmd(cmd)                                                  \
+	for ((cmd) = &mem_commands[0];                                         \
+	     ((cmd) - mem_commands) < ARRAY_SIZE(mem_commands); (cmd)++)
+
+#define cxl_cmd_count ARRAY_SIZE(mem_commands)
+
+static int cxl_mem_wait_for_doorbell(struct cxl_mem *cxlm)
+{
+	const unsigned long start = jiffies;
+	unsigned long end = start;
+
+	while (cxl_doorbell_busy(cxlm)) {
+		end = jiffies;
+
+		if (time_after(end, start + CXL_MAILBOX_TIMEOUT_MS)) {
+			/* Check again in case preempted before timeout test */
+			if (!cxl_doorbell_busy(cxlm))
+				break;
+			return -ETIMEDOUT;
+		}
+		cpu_relax();
+	}
+
+	dev_dbg(&cxlm->pdev->dev, "Doorbell wait took %dms",
+		jiffies_to_msecs(end) - jiffies_to_msecs(start));
+	return 0;
+}
+
+static bool cxl_is_security_command(u16 opcode)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(security_command_sets); i++)
+		if (security_command_sets[i] == (opcode >> 8))
+			return true;
+	return false;
+}
+
+static void cxl_mem_mbox_timeout(struct cxl_mem *cxlm,
+				 struct mbox_cmd *mbox_cmd)
+{
+	struct device *dev = &cxlm->pdev->dev;
+
+	dev_dbg(dev, "Mailbox command (opcode: %#x size: %zub) timed out\n",
+		mbox_cmd->opcode, mbox_cmd->size_in);
+}
+
+/**
+ * __cxl_mem_mbox_send_cmd() - Execute a mailbox command
+ * @cxlm: The CXL memory device to communicate with.
+ * @mbox_cmd: Command to send to the memory device.
+ *
+ * Context: Any context. Expects mbox_mutex to be held.
+ * Return: -ETIMEDOUT if timeout occurred waiting for completion. 0 on success.
+ *         Caller should check the return code in @mbox_cmd to make sure it
+ *         succeeded.
+ *
+ * This is a generic form of the CXL mailbox send command thus only using the
+ * registers defined by the mailbox capability ID - CXL 2.0 8.2.8.4. Memory
+ * devices, and perhaps other types of CXL devices may have further information
+ * available upon error conditions. Driver facilities wishing to send mailbox
+ * commands should use the wrapper command.
+ *
+ * The CXL spec allows for up to two mailboxes. The intention is for the primary
+ * mailbox to be OS controlled and the secondary mailbox to be used by system
+ * firmware. This allows the OS and firmware to communicate with the device and
+ * not need to coordinate with each other. The driver only uses the primary
+ * mailbox.
+ */
+static int __cxl_mem_mbox_send_cmd(struct cxl_mem *cxlm,
+				   struct mbox_cmd *mbox_cmd)
+{
+	void __iomem *payload = cxlm->mbox_regs + CXLDEV_MBOX_PAYLOAD_OFFSET;
+	u64 cmd_reg, status_reg;
+	size_t out_len;
+	int rc;
+
+	lockdep_assert_held(&cxlm->mbox_mutex);
+
+	/*
+	 * Here are the steps from 8.2.8.4 of the CXL 2.0 spec.
+	 *   1. Caller reads MB Control Register to verify doorbell is clear
+	 *   2. Caller writes Command Register
+	 *   3. Caller writes Command Payload Registers if input payload is non-empty
+	 *   4. Caller writes MB Control Register to set doorbell
+	 *   5. Caller either polls for doorbell to be clear or waits for interrupt if configured
+	 *   6. Caller reads MB Status Register to fetch Return code
+	 *   7. If command successful, Caller reads Command Register to get Payload Length
+	 *   8. If output payload is non-empty, host reads Command Payload Registers
+	 *
+	 * Hardware is free to do whatever it wants before the doorbell is rung,
+	 * and isn't allowed to change anything after it clears the doorbell. As
+	 * such, steps 2 and 3 can happen in any order, and steps 6, 7, 8 can
+	 * also happen in any order (though some orders might not make sense).
+	 */
+
+	/* #1 */
+	if (cxl_doorbell_busy(cxlm)) {
+		dev_err_ratelimited(&cxlm->pdev->dev,
+				    "Mailbox re-busy after acquiring\n");
+		return -EBUSY;
+	}
+
+	cmd_reg = FIELD_PREP(CXLDEV_MBOX_CMD_COMMAND_OPCODE_MASK,
+			     mbox_cmd->opcode);
+	if (mbox_cmd->size_in) {
+		if (WARN_ON(!mbox_cmd->payload_in))
+			return -EINVAL;
+
+		cmd_reg |= FIELD_PREP(CXLDEV_MBOX_CMD_PAYLOAD_LENGTH_MASK,
+				      mbox_cmd->size_in);
+		memcpy_toio(payload, mbox_cmd->payload_in, mbox_cmd->size_in);
+	}
+
+	/* #2, #3 */
+	writeq(cmd_reg, cxlm->mbox_regs + CXLDEV_MBOX_CMD_OFFSET);
+
+	/* #4 */
+	dev_dbg(&cxlm->pdev->dev, "Sending command\n");
+	writel(CXLDEV_MBOX_CTRL_DOORBELL,
+	       cxlm->mbox_regs + CXLDEV_MBOX_CTRL_OFFSET);
+
+	/* #5 */
+	rc = cxl_mem_wait_for_doorbell(cxlm);
+	if (rc == -ETIMEDOUT) {
+		cxl_mem_mbox_timeout(cxlm, mbox_cmd);
+		return rc;
+	}
+
+	/* #6 */
+	status_reg = readq(cxlm->mbox_regs + CXLDEV_MBOX_STATUS_OFFSET);
+	mbox_cmd->return_code =
+		FIELD_GET(CXLDEV_MBOX_STATUS_RET_CODE_MASK, status_reg);
+
+	if (mbox_cmd->return_code != 0) {
+		dev_dbg(&cxlm->pdev->dev, "Mailbox operation had an error\n");
+		return 0;
+	}
+
+	/* #7 */
+	cmd_reg = readq(cxlm->mbox_regs + CXLDEV_MBOX_CMD_OFFSET);
+	out_len = FIELD_GET(CXLDEV_MBOX_CMD_PAYLOAD_LENGTH_MASK, cmd_reg);
+
+	/* #8 */
+	if (out_len && mbox_cmd->payload_out) {
+		/*
+		 * Sanitize the copy. If hardware misbehaves, out_len per the
+		 * spec can actually be greater than the max allowed size (21
+		 * bits available but spec defined 1M max). The caller also may
+		 * have requested less data than the hardware supplied even
+		 * within spec.
+		 */
+		size_t n = min3(mbox_cmd->size_out, cxlm->payload_size, out_len);
+
+		memcpy_fromio(mbox_cmd->payload_out, payload, n);
+		mbox_cmd->size_out = n;
+	} else {
+		mbox_cmd->size_out = 0;
+	}
+
+	return 0;
+}
+
+/**
+ * cxl_mem_mbox_get() - Acquire exclusive access to the mailbox.
+ * @cxlm: The memory device to gain access to.
+ *
+ * Context: Any context. Takes the mbox_mutex.
+ * Return: 0 if exclusive access was acquired.
+ */
+static int cxl_mem_mbox_get(struct cxl_mem *cxlm)
+{
+	struct device *dev = &cxlm->pdev->dev;
+	u64 md_status;
+	int rc;
+
+	mutex_lock_io(&cxlm->mbox_mutex);
+
+	/*
+	 * XXX: There is some amount of ambiguity in the 2.0 version of the spec
+	 * around the mailbox interface ready (8.2.8.5.1.1).  The purpose of the
+	 * bit is to allow firmware running on the device to notify the driver
+	 * that it's ready to receive commands. It is unclear if the bit needs
+	 * to be read for each transaction mailbox, ie. the firmware can switch
+	 * it on and off as needed. Second, there is no defined timeout for
+	 * mailbox ready, like there is for the doorbell interface.
+	 *
+	 * Assumptions:
+	 * 1. The firmware might toggle the Mailbox Interface Ready bit, check
+	 *    it for every command.
+	 *
+	 * 2. If the doorbell is clear, the firmware should have first set the
+	 *    Mailbox Interface Ready bit. Therefore, waiting for the doorbell
+	 *    to be ready is sufficient.
+	 */
+	rc = cxl_mem_wait_for_doorbell(cxlm);
+	if (rc) {
+		dev_warn(dev, "Mailbox interface not ready\n");
+		goto out;
+	}
+
+	md_status = readq(cxlm->memdev_regs + CXLMDEV_STATUS_OFFSET);
+	if (!(md_status & CXLMDEV_MBOX_IF_READY && CXLMDEV_READY(md_status))) {
+		dev_err(dev, "mbox: reported doorbell ready, but not mbox ready\n");
+		rc = -EBUSY;
+		goto out;
+	}
+
+	/*
+	 * Hardware shouldn't allow a ready status but also have failure bits
+	 * set. Spit out an error, this should be a bug report
+	 */
+	rc = -EFAULT;
+	if (md_status & CXLMDEV_DEV_FATAL) {
+		dev_err(dev, "mbox: reported ready, but fatal\n");
+		goto out;
+	}
+	if (md_status & CXLMDEV_FW_HALT) {
+		dev_err(dev, "mbox: reported ready, but halted\n");
+		goto out;
+	}
+	if (CXLMDEV_RESET_NEEDED(md_status)) {
+		dev_err(dev, "mbox: reported ready, but reset needed\n");
+		goto out;
+	}
+
+	/* with lock held */
+	return 0;
+
+out:
+	mutex_unlock(&cxlm->mbox_mutex);
+	return rc;
+}
+
+/**
+ * cxl_mem_mbox_put() - Release exclusive access to the mailbox.
+ * @cxlm: The CXL memory device to communicate with.
+ *
+ * Context: Any context. Expects mbox_mutex to be held.
+ */
+static void cxl_mem_mbox_put(struct cxl_mem *cxlm)
+{
+	mutex_unlock(&cxlm->mbox_mutex);
+}
+
+/**
+ * handle_mailbox_cmd_from_user() - Dispatch a mailbox command for userspace.
+ * @cxlm: The CXL memory device to communicate with.
+ * @cmd: The validated command.
+ * @in_payload: Pointer to userspace's input payload.
+ * @out_payload: Pointer to userspace's output payload.
+ * @size_out: (Input) Max payload size to copy out.
+ *            (Output) Payload size hardware generated.
+ * @retval: Hardware generated return code from the operation.
+ *
+ * Return:
+ *  * %0	- Mailbox transaction succeeded. This implies the mailbox
+ *		  protocol completed successfully not that the operation itself
+ *		  was successful.
+ *  * %-ENOMEM  - Couldn't allocate a bounce buffer.
+ *  * %-EFAULT	- Something happened with copy_to/from_user.
+ *  * %-EINTR	- Mailbox acquisition interrupted.
+ *  * %-EXXX	- Transaction level failures.
+ *
+ * Creates the appropriate mailbox command and dispatches it on behalf of a
+ * userspace request. The input and output payloads are copied between
+ * userspace.
+ *
+ * See cxl_send_cmd().
+ */
+static int handle_mailbox_cmd_from_user(struct cxl_mem *cxlm,
+					const struct cxl_mem_command *cmd,
+					u64 in_payload, u64 out_payload,
+					s32 *size_out, u32 *retval)
+{
+	struct device *dev = &cxlm->pdev->dev;
+	struct mbox_cmd mbox_cmd = {
+		.opcode = cmd->opcode,
+		.size_in = cmd->info.size_in,
+		.size_out = cmd->info.size_out,
+	};
+	int rc;
+
+	if (cmd->info.size_out) {
+		mbox_cmd.payload_out = kvzalloc(cmd->info.size_out, GFP_KERNEL);
+		if (!mbox_cmd.payload_out)
+			return -ENOMEM;
+	}
+
+	if (cmd->info.size_in) {
+		mbox_cmd.payload_in = vmemdup_user(u64_to_user_ptr(in_payload),
+						   cmd->info.size_in);
+		if (IS_ERR(mbox_cmd.payload_in)) {
+			kvfree(mbox_cmd.payload_out);
+			return PTR_ERR(mbox_cmd.payload_in);
+		}
+	}
+
+	rc = cxl_mem_mbox_get(cxlm);
+	if (rc)
+		goto out;
+
+	dev_dbg(dev,
+		"Submitting %s command for user\n"
+		"\topcode: %x\n"
+		"\tsize: %ub\n",
+		cxl_command_names[cmd->info.id].name, mbox_cmd.opcode,
+		cmd->info.size_in);
+
+	dev_WARN_ONCE(dev, cmd->info.id == CXL_MEM_COMMAND_ID_RAW,
+		      "raw command path used\n");
+
+	rc = __cxl_mem_mbox_send_cmd(cxlm, &mbox_cmd);
+	cxl_mem_mbox_put(cxlm);
+	if (rc)
+		goto out;
+
+	/*
+	 * @size_out contains the max size that's allowed to be written back out
+	 * to userspace. While the payload may have written more output than
+	 * this it will have to be ignored.
+	 */
+	if (mbox_cmd.size_out) {
+		dev_WARN_ONCE(dev, mbox_cmd.size_out > *size_out,
+			      "Invalid return size\n");
+		if (copy_to_user(u64_to_user_ptr(out_payload),
+				 mbox_cmd.payload_out, mbox_cmd.size_out)) {
+			rc = -EFAULT;
+			goto out;
+		}
+	}
+
+	*size_out = mbox_cmd.size_out;
+	*retval = mbox_cmd.return_code;
+
+out:
+	kvfree(mbox_cmd.payload_in);
+	kvfree(mbox_cmd.payload_out);
+	return rc;
+}
+
+static bool cxl_mem_raw_command_allowed(u16 opcode)
+{
+	int i;
+
+	if (!IS_ENABLED(CONFIG_CXL_MEM_RAW_COMMANDS))
+		return false;
+
+	if (security_locked_down(LOCKDOWN_NONE))
+		return false;
+
+	if (cxl_raw_allow_all)
+		return true;
+
+	if (cxl_is_security_command(opcode))
+		return false;
+
+	for (i = 0; i < ARRAY_SIZE(cxl_disabled_raw_commands); i++)
+		if (cxl_disabled_raw_commands[i] == opcode)
+			return false;
+
+	return true;
+}
+
+/**
+ * cxl_validate_cmd_from_user() - Check fields for CXL_MEM_SEND_COMMAND.
+ * @cxlm: &struct cxl_mem device whose mailbox will be used.
+ * @send_cmd: &struct cxl_send_command copied in from userspace.
+ * @out_cmd: Sanitized and populated &struct cxl_mem_command.
+ *
+ * Return:
+ *  * %0	- @out_cmd is ready to send.
+ *  * %-ENOTTY	- Invalid command specified.
+ *  * %-EINVAL	- Reserved fields or invalid values were used.
+ *  * %-ENOMEM	- Input or output buffer wasn't sized properly.
+ *  * %-EPERM	- Attempted to use a protected command.
+ *
+ * The result of this command is a fully validated command in @out_cmd that is
+ * safe to send to the hardware.
+ *
+ * See handle_mailbox_cmd_from_user()
+ */
+static int cxl_validate_cmd_from_user(struct cxl_mem *cxlm,
+				      const struct cxl_send_command *send_cmd,
+				      struct cxl_mem_command *out_cmd)
+{
+	const struct cxl_command_info *info;
+	struct cxl_mem_command *c;
+
+	if (send_cmd->id == 0 || send_cmd->id >= CXL_MEM_COMMAND_ID_MAX)
+		return -ENOTTY;
+
+	/*
+	 * The user can never specify an input payload larger than what hardware
+	 * supports, but output can be arbitrarily large (simply write out as
+	 * much data as the hardware provides).
+	 */
+	if (send_cmd->in.size > cxlm->payload_size)
+		return -EINVAL;
+
+	/*
+	 * Checks are bypassed for raw commands but a WARN/taint will occur
+	 * later in the callchain
+	 */
+	if (send_cmd->id == CXL_MEM_COMMAND_ID_RAW) {
+		const struct cxl_mem_command temp = {
+			.info = {
+				.id = CXL_MEM_COMMAND_ID_RAW,
+				.flags = 0,
+				.size_in = send_cmd->in.size,
+				.size_out = send_cmd->out.size,
+			},
+			.opcode = send_cmd->raw.opcode
+		};
+
+		if (send_cmd->raw.rsvd)
+			return -EINVAL;
+
+		/*
+		 * Unlike supported commands, the output size of RAW commands
+		 * gets passed along without further checking, so it must be
+		 * validated here.
+		 */
+		if (send_cmd->out.size > cxlm->payload_size)
+			return -EINVAL;
+
+		if (!cxl_mem_raw_command_allowed(send_cmd->raw.opcode))
+			return -EPERM;
+
+		memcpy(out_cmd, &temp, sizeof(temp));
+
+		return 0;
+	}
+
+	if (send_cmd->flags & ~CXL_MEM_COMMAND_FLAG_MASK)
+		return -EINVAL;
+
+	if (send_cmd->rsvd)
+		return -EINVAL;
+
+	if (send_cmd->in.rsvd || send_cmd->out.rsvd)
+		return -EINVAL;
+
+	/* Convert user's command into the internal representation */
+	c = &mem_commands[send_cmd->id];
+	info = &c->info;
+
+	/* Check that the command is enabled for hardware */
+	if (!test_bit(info->id, cxlm->enabled_cmds))
+		return -ENOTTY;
+
+	/* Check the input buffer is the expected size */
+	if (info->size_in >= 0 && info->size_in != send_cmd->in.size)
+		return -ENOMEM;
+
+	/* Check the output buffer is at least large enough */
+	if (info->size_out >= 0 && send_cmd->out.size < info->size_out)
+		return -ENOMEM;
+
+	memcpy(out_cmd, c, sizeof(*c));
+	out_cmd->info.size_in = send_cmd->in.size;
+	/*
+	 * XXX: out_cmd->info.size_out will be controlled by the driver, and the
+	 * specified number of bytes @send_cmd->out.size will be copied back out
+	 * to userspace.
+	 */
+
+	return 0;
+}
+
+static int cxl_query_cmd(struct cxl_memdev *cxlmd,
+			 struct cxl_mem_query_commands __user *q)
+{
+	struct device *dev = &cxlmd->dev;
+	struct cxl_mem_command *cmd;
+	u32 n_commands;
+	int j = 0;
+
+	dev_dbg(dev, "Query IOCTL\n");
+
+	if (get_user(n_commands, &q->n_commands))
+		return -EFAULT;
+
+	/* returns the total number if 0 elements are requested. */
+	if (n_commands == 0)
+		return put_user(cxl_cmd_count, &q->n_commands);
+
+	/*
+	 * otherwise, return max(n_commands, total commands) cxl_command_info
+	 * structures.
+	 */
+	cxl_for_each_cmd(cmd) {
+		const struct cxl_command_info *info = &cmd->info;
+
+		if (copy_to_user(&q->commands[j++], info, sizeof(*info)))
+			return -EFAULT;
+
+		if (j == n_commands)
+			break;
+	}
+
+	return 0;
+}
+
+static int cxl_send_cmd(struct cxl_memdev *cxlmd,
+			struct cxl_send_command __user *s)
+{
+	struct cxl_mem *cxlm = cxlmd->cxlm;
+	struct device *dev = &cxlmd->dev;
+	struct cxl_send_command send;
+	struct cxl_mem_command c;
+	int rc;
+
+	dev_dbg(dev, "Send IOCTL\n");
+
+	if (copy_from_user(&send, s, sizeof(send)))
+		return -EFAULT;
+
+	rc = cxl_validate_cmd_from_user(cxlmd->cxlm, &send, &c);
+	if (rc)
+		return rc;
+
+	/* Prepare to handle a full payload for variable sized output */
+	if (c.info.size_out < 0)
+		c.info.size_out = cxlm->payload_size;
+
+	rc = handle_mailbox_cmd_from_user(cxlm, &c, send.in.payload,
+					  send.out.payload, &send.out.size,
+					  &send.retval);
+	if (rc)
+		return rc;
+
+	if (copy_to_user(s, &send, sizeof(send)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static long __cxl_memdev_ioctl(struct cxl_memdev *cxlmd, unsigned int cmd,
+			       unsigned long arg)
+{
+	switch (cmd) {
+	case CXL_MEM_QUERY_COMMANDS:
+		return cxl_query_cmd(cxlmd, (void __user *)arg);
+	case CXL_MEM_SEND_COMMAND:
+		return cxl_send_cmd(cxlmd, (void __user *)arg);
+	default:
+		return -ENOTTY;
+	}
+}
+
+static long cxl_memdev_ioctl(struct file *file, unsigned int cmd,
+			     unsigned long arg)
+{
+	struct cxl_memdev *cxlmd;
+	struct inode *inode;
+	int rc = -ENOTTY;
+
+	inode = file_inode(file);
+	cxlmd = container_of(inode->i_cdev, typeof(*cxlmd), cdev);
+
+	if (!percpu_ref_tryget_live(&cxlmd->ops_active))
+		return -ENXIO;
+
+	rc = __cxl_memdev_ioctl(cxlmd, cmd, arg);
+
+	percpu_ref_put(&cxlmd->ops_active);
+
+	return rc;
+}
+
+static const struct file_operations cxl_memdev_fops = {
+	.owner = THIS_MODULE,
+	.unlocked_ioctl = cxl_memdev_ioctl,
+	.compat_ioctl = compat_ptr_ioctl,
+	.llseek = noop_llseek,
+};
+
+static inline struct cxl_mem_command *cxl_mem_find_command(u16 opcode)
+{
+	struct cxl_mem_command *c;
+
+	cxl_for_each_cmd(c)
+		if (c->opcode == opcode)
+			return c;
+
+	return NULL;
+}
+
+/**
+ * cxl_mem_mbox_send_cmd() - Send a mailbox command to a memory device.
+ * @cxlm: The CXL memory device to communicate with.
+ * @opcode: Opcode for the mailbox command.
+ * @in: The input payload for the mailbox command.
+ * @in_size: The length of the input payload
+ * @out: Caller allocated buffer for the output.
+ * @out_size: Expected size of output.
+ *
+ * Context: Any context. Will acquire and release mbox_mutex.
+ * Return:
+ *  * %>=0	- Number of bytes returned in @out.
+ *  * %-E2BIG	- Payload is too large for hardware.
+ *  * %-EBUSY	- Couldn't acquire exclusive mailbox access.
+ *  * %-EFAULT	- Hardware error occurred.
+ *  * %-ENXIO	- Command completed, but device reported an error.
+ *  * %-EIO	- Unexpected output size.
+ *
+ * Mailbox commands may execute successfully yet the device itself reported an
+ * error. While this distinction can be useful for commands from userspace, the
+ * kernel will only be able to use results when both are successful.
+ *
+ * See __cxl_mem_mbox_send_cmd()
+ */
+static int cxl_mem_mbox_send_cmd(struct cxl_mem *cxlm, u16 opcode,
+				 void *in, size_t in_size,
+				 void *out, size_t out_size)
+{
+	const struct cxl_mem_command *cmd = cxl_mem_find_command(opcode);
+	struct mbox_cmd mbox_cmd = {
+		.opcode = opcode,
+		.payload_in = in,
+		.size_in = in_size,
+		.size_out = out_size,
+		.payload_out = out,
+	};
+	int rc;
+
+	if (out_size > cxlm->payload_size)
+		return -E2BIG;
+
+	rc = cxl_mem_mbox_get(cxlm);
+	if (rc)
+		return rc;
+
+	rc = __cxl_mem_mbox_send_cmd(cxlm, &mbox_cmd);
+	cxl_mem_mbox_put(cxlm);
+	if (rc)
+		return rc;
+
+	/* TODO: Map return code to proper kernel style errno */
+	if (mbox_cmd.return_code != CXL_MBOX_SUCCESS)
+		return -ENXIO;
+
+	/*
+	 * Variable sized commands can't be validated and so it's up to the
+	 * caller to do that if they wish.
+	 */
+	if (cmd->info.size_out >= 0 && mbox_cmd.size_out != out_size)
+		return -EIO;
+
+	return 0;
+}
+
+/**
+ * cxl_mem_setup_regs() - Setup necessary MMIO.
+ * @cxlm: The CXL memory device to communicate with.
+ *
+ * Return: 0 if all necessary registers mapped.
+ *
+ * A memory device is required by spec to implement a certain set of MMIO
+ * regions. The purpose of this function is to enumerate and map those
+ * registers.
+ */
+static int cxl_mem_setup_regs(struct cxl_mem *cxlm)
+{
+	struct device *dev = &cxlm->pdev->dev;
+	int cap, cap_count;
+	u64 cap_array;
+
+	cap_array = readq(cxlm->regs + CXLDEV_CAP_ARRAY_OFFSET);
+	if (FIELD_GET(CXLDEV_CAP_ARRAY_ID_MASK, cap_array) !=
+	    CXLDEV_CAP_ARRAY_CAP_ID)
+		return -ENODEV;
+
+	cap_count = FIELD_GET(CXLDEV_CAP_ARRAY_COUNT_MASK, cap_array);
+
+	for (cap = 1; cap <= cap_count; cap++) {
+		void __iomem *register_block;
+		u32 offset;
+		u16 cap_id;
+
+		cap_id = FIELD_GET(CXLDEV_CAP_HDR_CAP_ID_MASK,
+				   readl(cxlm->regs + cap * 0x10));
+		offset = readl(cxlm->regs + cap * 0x10 + 0x4);
+		register_block = cxlm->regs + offset;
+
+		switch (cap_id) {
+		case CXLDEV_CAP_CAP_ID_DEVICE_STATUS:
+			dev_dbg(dev, "found Status capability (0x%x)\n", offset);
+			cxlm->status_regs = register_block;
+			break;
+		case CXLDEV_CAP_CAP_ID_PRIMARY_MAILBOX:
+			dev_dbg(dev, "found Mailbox capability (0x%x)\n", offset);
+			cxlm->mbox_regs = register_block;
+			break;
+		case CXLDEV_CAP_CAP_ID_SECONDARY_MAILBOX:
+			dev_dbg(dev, "found Secondary Mailbox capability (0x%x)\n", offset);
+			break;
+		case CXLDEV_CAP_CAP_ID_MEMDEV:
+			dev_dbg(dev, "found Memory Device capability (0x%x)\n", offset);
+			cxlm->memdev_regs = register_block;
+			break;
+		default:
+			dev_dbg(dev, "Unknown cap ID: %d (0x%x)\n", cap_id, offset);
+			break;
+		}
+	}
+
+	if (!cxlm->status_regs || !cxlm->mbox_regs || !cxlm->memdev_regs) {
+		dev_err(dev, "registers not found: %s%s%s\n",
+			!cxlm->status_regs ? "status " : "",
+			!cxlm->mbox_regs ? "mbox " : "",
+			!cxlm->memdev_regs ? "memdev" : "");
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+static int cxl_mem_setup_mailbox(struct cxl_mem *cxlm)
+{
+	const int cap = readl(cxlm->mbox_regs + CXLDEV_MBOX_CAPS_OFFSET);
+
+	cxlm->payload_size =
+		1 << FIELD_GET(CXLDEV_MBOX_CAP_PAYLOAD_SIZE_MASK, cap);
+
+	/*
+	 * CXL 2.0 8.2.8.4.3 Mailbox Capabilities Register
+	 *
+	 * If the size is too small, mandatory commands will not work and so
+	 * there's no point in going forward. If the size is too large, there's
+	 * no harm is soft limiting it.
+	 */
+	cxlm->payload_size = min_t(size_t, cxlm->payload_size, SZ_1M);
+	if (cxlm->payload_size < 256) {
+		dev_err(&cxlm->pdev->dev, "Mailbox is too small (%zub)",
+			cxlm->payload_size);
+		return -ENXIO;
+	}
+
+	dev_dbg(&cxlm->pdev->dev, "Mailbox payload sized %zu",
+		cxlm->payload_size);
+
+	return 0;
+}
+
+static struct cxl_mem *cxl_mem_create(struct pci_dev *pdev, u32 reg_lo,
+				      u32 reg_hi)
+{
+	struct device *dev = &pdev->dev;
+	struct cxl_mem *cxlm;
+	void __iomem *regs;
+	u64 offset;
+	u8 bar;
+	int rc;
+
+	cxlm = devm_kzalloc(&pdev->dev, sizeof(*cxlm), GFP_KERNEL);
+	if (!cxlm) {
+		dev_err(dev, "No memory available\n");
+		return NULL;
+	}
+
+	offset = ((u64)reg_hi << 32) | FIELD_GET(CXL_REGLOC_ADDR_MASK, reg_lo);
+	bar = FIELD_GET(CXL_REGLOC_BIR_MASK, reg_lo);
+
+	/* Basic sanity check that BAR is big enough */
+	if (pci_resource_len(pdev, bar) < offset) {
+		dev_err(dev, "BAR%d: %pr: too small (offset: %#llx)\n", bar,
+			&pdev->resource[bar], (unsigned long long)offset);
+		return NULL;
+	}
+
+	rc = pcim_iomap_regions(pdev, BIT(bar), pci_name(pdev));
+	if (rc) {
+		dev_err(dev, "failed to map registers\n");
+		return NULL;
+	}
+	regs = pcim_iomap_table(pdev)[bar];
+
+	mutex_init(&cxlm->mbox_mutex);
+	cxlm->pdev = pdev;
+	cxlm->regs = regs + offset;
+	cxlm->enabled_cmds =
+		devm_kmalloc_array(dev, BITS_TO_LONGS(cxl_cmd_count),
+				   sizeof(unsigned long),
+				   GFP_KERNEL | __GFP_ZERO);
+	if (!cxlm->enabled_cmds) {
+		dev_err(dev, "No memory available for bitmap\n");
+		return NULL;
+	}
+
+	dev_dbg(dev, "Mapped CXL Memory Device resource\n");
+	return cxlm;
+}
+
+static int cxl_mem_dvsec(struct pci_dev *pdev, int dvsec)
+{
+	int pos;
+
+	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_DVSEC);
+	if (!pos)
+		return 0;
+
+	while (pos) {
+		u16 vendor, id;
+
+		pci_read_config_word(pdev, pos + PCI_DVSEC_HEADER1, &vendor);
+		pci_read_config_word(pdev, pos + PCI_DVSEC_HEADER2, &id);
+		if (vendor == PCI_DVSEC_VENDOR_ID_CXL && dvsec == id)
+			return pos;
+
+		pos = pci_find_next_ext_capability(pdev, pos,
+						   PCI_EXT_CAP_ID_DVSEC);
+	}
+
+	return 0;
+}
+
+static struct cxl_memdev *to_cxl_memdev(struct device *dev)
+{
+	return container_of(dev, struct cxl_memdev, dev);
+}
+
+static void cxl_memdev_release(struct device *dev)
+{
+	struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
+
+	percpu_ref_exit(&cxlmd->ops_active);
+	ida_free(&cxl_memdev_ida, cxlmd->id);
+	kfree(cxlmd);
+}
+
+static char *cxl_memdev_devnode(struct device *dev, umode_t *mode, kuid_t *uid,
+				kgid_t *gid)
+{
+	return kasprintf(GFP_KERNEL, "cxl/%s", dev_name(dev));
+}
+
+static ssize_t firmware_version_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
+	struct cxl_mem *cxlm = cxlmd->cxlm;
+
+	return sprintf(buf, "%.16s\n", cxlm->firmware_version);
+}
+static DEVICE_ATTR_RO(firmware_version);
+
+static ssize_t payload_max_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
+	struct cxl_mem *cxlm = cxlmd->cxlm;
+
+	return sprintf(buf, "%zu\n", cxlm->payload_size);
+}
+static DEVICE_ATTR_RO(payload_max);
+
+static ssize_t ram_size_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
+	struct cxl_mem *cxlm = cxlmd->cxlm;
+	unsigned long long len = range_len(&cxlm->ram_range);
+
+	return sprintf(buf, "%#llx\n", len);
+}
+
+static struct device_attribute dev_attr_ram_size =
+	__ATTR(size, 0444, ram_size_show, NULL);
+
+static ssize_t pmem_size_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
+	struct cxl_mem *cxlm = cxlmd->cxlm;
+	unsigned long long len = range_len(&cxlm->pmem_range);
+
+	return sprintf(buf, "%#llx\n", len);
+}
+
+static struct device_attribute dev_attr_pmem_size =
+	__ATTR(size, 0444, pmem_size_show, NULL);
+
+static struct attribute *cxl_memdev_attributes[] = {
+	&dev_attr_firmware_version.attr,
+	&dev_attr_payload_max.attr,
+	NULL,
+};
+
+static struct attribute *cxl_memdev_pmem_attributes[] = {
+	&dev_attr_pmem_size.attr,
+	NULL,
+};
+
+static struct attribute *cxl_memdev_ram_attributes[] = {
+	&dev_attr_ram_size.attr,
+	NULL,
+};
+
+static struct attribute_group cxl_memdev_attribute_group = {
+	.attrs = cxl_memdev_attributes,
+};
+
+static struct attribute_group cxl_memdev_ram_attribute_group = {
+	.name = "ram",
+	.attrs = cxl_memdev_ram_attributes,
+};
+
+static struct attribute_group cxl_memdev_pmem_attribute_group = {
+	.name = "pmem",
+	.attrs = cxl_memdev_pmem_attributes,
+};
+
+static const struct attribute_group *cxl_memdev_attribute_groups[] = {
+	&cxl_memdev_attribute_group,
+	&cxl_memdev_ram_attribute_group,
+	&cxl_memdev_pmem_attribute_group,
+	NULL,
+};
+
+static const struct device_type cxl_memdev_type = {
+	.name = "cxl_memdev",
+	.release = cxl_memdev_release,
+	.devnode = cxl_memdev_devnode,
+	.groups = cxl_memdev_attribute_groups,
+};
+
+static void cxlmdev_unregister(void *_cxlmd)
+{
+	struct cxl_memdev *cxlmd = _cxlmd;
+	struct device *dev = &cxlmd->dev;
+
+	percpu_ref_kill(&cxlmd->ops_active);
+	cdev_device_del(&cxlmd->cdev, dev);
+	wait_for_completion(&cxlmd->ops_dead);
+	cxlmd->cxlm = NULL;
+	put_device(dev);
+}
+
+static void cxlmdev_ops_active_release(struct percpu_ref *ref)
+{
+	struct cxl_memdev *cxlmd =
+		container_of(ref, typeof(*cxlmd), ops_active);
+
+	complete(&cxlmd->ops_dead);
+}
+
+static int cxl_mem_add_memdev(struct cxl_mem *cxlm)
+{
+	struct pci_dev *pdev = cxlm->pdev;
+	struct cxl_memdev *cxlmd;
+	struct device *dev;
+	struct cdev *cdev;
+	int rc;
+
+	cxlmd = kzalloc(sizeof(*cxlmd), GFP_KERNEL);
+	if (!cxlmd)
+		return -ENOMEM;
+	init_completion(&cxlmd->ops_dead);
+
+	/*
+	 * @cxlm is deallocated when the driver unbinds so operations
+	 * that are using it need to hold a live reference.
+	 */
+	cxlmd->cxlm = cxlm;
+	rc = percpu_ref_init(&cxlmd->ops_active, cxlmdev_ops_active_release, 0,
+			     GFP_KERNEL);
+	if (rc)
+		goto err_ref;
+
+	rc = ida_alloc_range(&cxl_memdev_ida, 0, CXL_MEM_MAX_DEVS, GFP_KERNEL);
+	if (rc < 0)
+		goto err_id;
+	cxlmd->id = rc;
+
+	dev = &cxlmd->dev;
+	device_initialize(dev);
+	dev->parent = &pdev->dev;
+	dev->bus = &cxl_bus_type;
+	dev->devt = MKDEV(cxl_mem_major, cxlmd->id);
+	dev->type = &cxl_memdev_type;
+	dev_set_name(dev, "mem%d", cxlmd->id);
+
+	cdev = &cxlmd->cdev;
+	cdev_init(cdev, &cxl_memdev_fops);
+
+	rc = cdev_device_add(cdev, dev);
+	if (rc)
+		goto err_add;
+
+	return devm_add_action_or_reset(dev->parent, cxlmdev_unregister, cxlmd);
+
+err_add:
+	ida_free(&cxl_memdev_ida, cxlmd->id);
+err_id:
+	/*
+	 * Theoretically userspace could have already entered the fops,
+	 * so flush ops_active.
+	 */
+	percpu_ref_kill(&cxlmd->ops_active);
+	wait_for_completion(&cxlmd->ops_dead);
+	percpu_ref_exit(&cxlmd->ops_active);
+err_ref:
+	kfree(cxlmd);
+
+	return rc;
+}
+
+static int cxl_xfer_log(struct cxl_mem *cxlm, uuid_t *uuid, u32 size, u8 *out)
+{
+	u32 remaining = size;
+	u32 offset = 0;
+
+	while (remaining) {
+		u32 xfer_size = min_t(u32, remaining, cxlm->payload_size);
+		struct cxl_mbox_get_log {
+			uuid_t uuid;
+			__le32 offset;
+			__le32 length;
+		} __packed log = {
+			.uuid = *uuid,
+			.offset = cpu_to_le32(offset),
+			.length = cpu_to_le32(xfer_size)
+		};
+		int rc;
+
+		rc = cxl_mem_mbox_send_cmd(cxlm, CXL_MBOX_OP_GET_LOG, &log,
+					   sizeof(log), out, xfer_size);
+		if (rc < 0)
+			return rc;
+
+		out += xfer_size;
+		remaining -= xfer_size;
+		offset += xfer_size;
+	}
+
+	return 0;
+}
+
+/**
+ * cxl_walk_cel() - Walk through the Command Effects Log.
+ * @cxlm: Device.
+ * @size: Length of the Command Effects Log.
+ * @cel: CEL
+ *
+ * Iterate over each entry in the CEL and determine if the driver supports the
+ * command. If so, the command is enabled for the device and can be used later.
+ */
+static void cxl_walk_cel(struct cxl_mem *cxlm, size_t size, u8 *cel)
+{
+	struct cel_entry {
+		__le16 opcode;
+		__le16 effect;
+	} __packed * cel_entry;
+	const int cel_entries = size / sizeof(*cel_entry);
+	int i;
+
+	cel_entry = (struct cel_entry *)cel;
+
+	for (i = 0; i < cel_entries; i++) {
+		u16 opcode = le16_to_cpu(cel_entry[i].opcode);
+		struct cxl_mem_command *cmd = cxl_mem_find_command(opcode);
+
+		if (!cmd) {
+			dev_dbg(&cxlm->pdev->dev,
+				"Opcode 0x%04x unsupported by driver", opcode);
+			continue;
+		}
+
+		set_bit(cmd->info.id, cxlm->enabled_cmds);
+	}
+}
+
+struct cxl_mbox_get_supported_logs {
+	__le16 entries;
+	u8 rsvd[6];
+	struct gsl_entry {
+		uuid_t uuid;
+		__le32 size;
+	} __packed entry[];
+} __packed;
+
+static struct cxl_mbox_get_supported_logs *cxl_get_gsl(struct cxl_mem *cxlm)
+{
+	struct cxl_mbox_get_supported_logs *ret;
+	int rc;
+
+	ret = kvmalloc(cxlm->payload_size, GFP_KERNEL);
+	if (!ret)
+		return ERR_PTR(-ENOMEM);
+
+	rc = cxl_mem_mbox_send_cmd(cxlm, CXL_MBOX_OP_GET_SUPPORTED_LOGS, NULL,
+				   0, ret, cxlm->payload_size);
+	if (rc < 0) {
+		kvfree(ret);
+		return ERR_PTR(rc);
+	}
+
+	return ret;
+}
+
+/**
+ * cxl_mem_enumerate_cmds() - Enumerate commands for a device.
+ * @cxlm: The device.
+ *
+ * Returns 0 if enumerate completed successfully.
+ *
+ * CXL devices have optional support for certain commands. This function will
+ * determine the set of supported commands for the hardware and update the
+ * enabled_cmds bitmap in the @cxlm.
+ */
+static int cxl_mem_enumerate_cmds(struct cxl_mem *cxlm)
+{
+	struct cxl_mbox_get_supported_logs *gsl;
+	struct device *dev = &cxlm->pdev->dev;
+	struct cxl_mem_command *cmd;
+	int i, rc;
+
+	gsl = cxl_get_gsl(cxlm);
+	if (IS_ERR(gsl))
+		return PTR_ERR(gsl);
+
+	rc = -ENOENT;
+	for (i = 0; i < le16_to_cpu(gsl->entries); i++) {
+		u32 size = le32_to_cpu(gsl->entry[i].size);
+		uuid_t uuid = gsl->entry[i].uuid;
+		u8 *log;
+
+		dev_dbg(dev, "Found LOG type %pU of size %d", &uuid, size);
+
+		if (!uuid_equal(&uuid, &log_uuid[CEL_UUID]))
+			continue;
+
+		log = kvmalloc(size, GFP_KERNEL);
+		if (!log) {
+			rc = -ENOMEM;
+			goto out;
+		}
+
+		rc = cxl_xfer_log(cxlm, &uuid, size, log);
+		if (rc) {
+			kvfree(log);
+			goto out;
+		}
+
+		cxl_walk_cel(cxlm, size, log);
+		kvfree(log);
+
+		/* In case CEL was bogus, enable some default commands. */
+		cxl_for_each_cmd(cmd)
+			if (cmd->flags & CXL_CMD_FLAG_FORCE_ENABLE)
+				set_bit(cmd->info.id, cxlm->enabled_cmds);
+
+		/* Found the required CEL */
+		rc = 0;
+	}
+
+out:
+	kvfree(gsl);
+	return rc;
+}
+
+/**
+ * cxl_mem_identify() - Send the IDENTIFY command to the device.
+ * @cxlm: The device to identify.
+ *
+ * Return: 0 if identify was executed successfully.
+ *
+ * This will dispatch the identify command to the device and on success populate
+ * structures to be exported to sysfs.
+ */
+static int cxl_mem_identify(struct cxl_mem *cxlm)
+{
+	struct cxl_mbox_identify {
+		char fw_revision[0x10];
+		__le64 total_capacity;
+		__le64 volatile_capacity;
+		__le64 persistent_capacity;
+		__le64 partition_align;
+		__le16 info_event_log_size;
+		__le16 warning_event_log_size;
+		__le16 failure_event_log_size;
+		__le16 fatal_event_log_size;
+		__le32 lsa_size;
+		u8 poison_list_max_mer[3];
+		__le16 inject_poison_limit;
+		u8 poison_caps;
+		u8 qos_telemetry_caps;
+	} __packed id;
+	int rc;
+
+	rc = cxl_mem_mbox_send_cmd(cxlm, CXL_MBOX_OP_IDENTIFY, NULL, 0, &id,
+				   sizeof(id));
+	if (rc < 0)
+		return rc;
+
+	/*
+	 * TODO: enumerate DPA map, as 'ram' and 'pmem' do not alias.
+	 * For now, only the capacity is exported in sysfs
+	 */
+	cxlm->ram_range.start = 0;
+	cxlm->ram_range.end = le64_to_cpu(id.volatile_capacity) - 1;
+
+	cxlm->pmem_range.start = 0;
+	cxlm->pmem_range.end = le64_to_cpu(id.persistent_capacity) - 1;
+
+	memcpy(cxlm->firmware_version, id.fw_revision, sizeof(id.fw_revision));
+
+	return 0;
+}
+
+static int cxl_mem_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct device *dev = &pdev->dev;
+	struct cxl_mem *cxlm = NULL;
+	u32 regloc_size, regblocks;
+	int rc, regloc, i;
+
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
+
+	regloc = cxl_mem_dvsec(pdev, PCI_DVSEC_ID_CXL_REGLOC_OFFSET);
+	if (!regloc) {
+		dev_err(dev, "register location dvsec not found\n");
+		return -ENXIO;
+	}
+
+	/* Get the size of the Register Locator DVSEC */
+	pci_read_config_dword(pdev, regloc + PCI_DVSEC_HEADER1, &regloc_size);
+	regloc_size = FIELD_GET(PCI_DVSEC_HEADER1_LENGTH_MASK, regloc_size);
+
+	regloc += PCI_DVSEC_ID_CXL_REGLOC_BLOCK1_OFFSET;
+	regblocks = (regloc_size - PCI_DVSEC_ID_CXL_REGLOC_BLOCK1_OFFSET) / 8;
+
+	for (i = 0; i < regblocks; i++, regloc += 8) {
+		u32 reg_lo, reg_hi;
+		u8 reg_type;
+
+		/* "register low and high" contain other bits */
+		pci_read_config_dword(pdev, regloc, &reg_lo);
+		pci_read_config_dword(pdev, regloc + 4, &reg_hi);
+
+		reg_type = FIELD_GET(CXL_REGLOC_RBI_MASK, reg_lo);
+
+		if (reg_type == CXL_REGLOC_RBI_MEMDEV) {
+			cxlm = cxl_mem_create(pdev, reg_lo, reg_hi);
+			break;
+		}
+	}
+
+	if (!cxlm)
+		return -ENODEV;
+
+	rc = cxl_mem_setup_regs(cxlm);
+	if (rc)
+		return rc;
+
+	rc = cxl_mem_setup_mailbox(cxlm);
+	if (rc)
+		return rc;
+
+	rc = cxl_mem_enumerate_cmds(cxlm);
+	if (rc)
+		return rc;
+
+	rc = cxl_mem_identify(cxlm);
+	if (rc)
+		return rc;
+
+	return cxl_mem_add_memdev(cxlm);
+}
+
+static const struct pci_device_id cxl_mem_pci_tbl[] = {
+	/* PCI class code for CXL.mem Type-3 Devices */
+	{ PCI_DEVICE_CLASS((PCI_CLASS_MEMORY_CXL << 8 | CXL_MEMORY_PROGIF), ~0)},
+	{ /* terminate list */ },
+};
+MODULE_DEVICE_TABLE(pci, cxl_mem_pci_tbl);
+
+static struct pci_driver cxl_mem_driver = {
+	.name			= KBUILD_MODNAME,
+	.id_table		= cxl_mem_pci_tbl,
+	.probe			= cxl_mem_probe,
+	.driver	= {
+		.probe_type	= PROBE_PREFER_ASYNCHRONOUS,
+	},
+};
+
+static __init int cxl_mem_init(void)
+{
+	struct dentry *mbox_debugfs;
+	dev_t devt;
+	int rc;
+
+	rc = alloc_chrdev_region(&devt, 0, CXL_MEM_MAX_DEVS, "cxl");
+	if (rc)
+		return rc;
+
+	cxl_mem_major = MAJOR(devt);
+
+	rc = pci_register_driver(&cxl_mem_driver);
+	if (rc) {
+		unregister_chrdev_region(MKDEV(cxl_mem_major, 0),
+					 CXL_MEM_MAX_DEVS);
+		return rc;
+	}
+
+	cxl_debugfs = debugfs_create_dir("cxl", NULL);
+	mbox_debugfs = debugfs_create_dir("mbox", cxl_debugfs);
+	debugfs_create_bool("raw_allow_all", 0600, mbox_debugfs,
+			    &cxl_raw_allow_all);
+
+	return 0;
+}
+
+static __exit void cxl_mem_exit(void)
+{
+	debugfs_remove_recursive(cxl_debugfs);
+	pci_unregister_driver(&cxl_mem_driver);
+	unregister_chrdev_region(MKDEV(cxl_mem_major, 0), CXL_MEM_MAX_DEVS);
+}
+
+MODULE_LICENSE("GPL v2");
+module_init(cxl_mem_init);
+module_exit(cxl_mem_exit);
+MODULE_IMPORT_NS(CXL);
diff --git a/drivers/cxl/pci.h b/drivers/cxl/pci.h
new file mode 100644
index 000000000000..af3ec078cf6c
--- /dev/null
+++ b/drivers/cxl/pci.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright(c) 2020 Intel Corporation. All rights reserved. */
+#ifndef __CXL_PCI_H__
+#define __CXL_PCI_H__
+
+#define CXL_MEMORY_PROGIF	0x10
+
+/*
+ * See section 8.1 Configuration Space Registers in the CXL 2.0
+ * Specification
+ */
+#define PCI_DVSEC_HEADER1_LENGTH_MASK	GENMASK(31, 20)
+#define PCI_DVSEC_VENDOR_ID_CXL		0x1E98
+#define PCI_DVSEC_ID_CXL		0x0
+
+#define PCI_DVSEC_ID_CXL_REGLOC_OFFSET		0x8
+#define PCI_DVSEC_ID_CXL_REGLOC_BLOCK1_OFFSET	0xC
+
+/* BAR Indicator Register (BIR) */
+#define CXL_REGLOC_BIR_MASK GENMASK(2, 0)
+
+/* Register Block Identifier (RBI) */
+#define CXL_REGLOC_RBI_MASK GENMASK(15, 8)
+#define CXL_REGLOC_RBI_EMPTY 0
+#define CXL_REGLOC_RBI_COMPONENT 1
+#define CXL_REGLOC_RBI_VIRT 2
+#define CXL_REGLOC_RBI_MEMDEV 3
+
+#define CXL_REGLOC_ADDR_MASK GENMASK(31, 16)
+
+#endif /* __CXL_PCI_H__ */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index d8156a5dbee8..766260a9b247 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -51,6 +51,7 @@
 #define PCI_BASE_CLASS_MEMORY		0x05
 #define PCI_CLASS_MEMORY_RAM		0x0500
 #define PCI_CLASS_MEMORY_FLASH		0x0501
+#define PCI_CLASS_MEMORY_CXL		0x0502
 #define PCI_CLASS_MEMORY_OTHER		0x0580
 
 #define PCI_BASE_CLASS_BRIDGE		0x06
diff --git a/include/uapi/linux/cxl_mem.h b/include/uapi/linux/cxl_mem.h
new file mode 100644
index 000000000000..3155382dfc9b
--- /dev/null
+++ b/include/uapi/linux/cxl_mem.h
@@ -0,0 +1,172 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * CXL IOCTLs for Memory Devices
+ */
+
+#ifndef _UAPI_CXL_MEM_H_
+#define _UAPI_CXL_MEM_H_
+
+#include <linux/types.h>
+
+/**
+ * DOC: UAPI
+ *
+ * Not all of all commands that the driver supports are always available for use
+ * by userspace. Userspace must check the results from the QUERY command in
+ * order to determine the live set of commands.
+ */
+
+#define CXL_MEM_QUERY_COMMANDS _IOR(0xCE, 1, struct cxl_mem_query_commands)
+#define CXL_MEM_SEND_COMMAND _IOWR(0xCE, 2, struct cxl_send_command)
+
+#define CXL_CMDS                                                          \
+	___C(INVALID, "Invalid Command"),                                 \
+	___C(IDENTIFY, "Identify Command"),                               \
+	___C(RAW, "Raw device command"),                                  \
+	___C(GET_SUPPORTED_LOGS, "Get Supported Logs"),                   \
+	___C(GET_FW_INFO, "Get FW Info"),                                 \
+	___C(GET_PARTITION_INFO, "Get Partition Information"),            \
+	___C(GET_LSA, "Get Label Storage Area"),                          \
+	___C(GET_HEALTH_INFO, "Get Health Info"),                         \
+	___C(GET_LOG, "Get Log"),                                         \
+	___C(MAX, "invalid / last command")
+
+#define ___C(a, b) CXL_MEM_COMMAND_ID_##a
+enum { CXL_CMDS };
+
+#undef ___C
+#define ___C(a, b) { b }
+static const struct {
+	const char *name;
+} cxl_command_names[] = { CXL_CMDS };
+
+/*
+ * Here's how this actually breaks out:
+ * cxl_command_names[] = {
+ *	[CXL_MEM_COMMAND_ID_INVALID] = { "Invalid Command" },
+ *	[CXL_MEM_COMMAND_ID_IDENTIFY] = { "Identify Command" },
+ *	...
+ *	[CXL_MEM_COMMAND_ID_MAX] = { "invalid / last command" },
+ * };
+ */
+
+#undef ___C
+
+/**
+ * struct cxl_command_info - Command information returned from a query.
+ * @id: ID number for the command.
+ * @flags: Flags that specify command behavior.
+ * @size_in: Expected input size, or -1 if variable length.
+ * @size_out: Expected output size, or -1 if variable length.
+ *
+ * Represents a single command that is supported by both the driver and the
+ * hardware. This is returned as part of an array from the query ioctl. The
+ * following would be a command that takes a variable length input and returns 0
+ * bytes of output.
+ *
+ *  - @id = 10
+ *  - @flags = 0
+ *  - @size_in = -1
+ *  - @size_out = 0
+ *
+ * See struct cxl_mem_query_commands.
+ */
+struct cxl_command_info {
+	__u32 id;
+
+	__u32 flags;
+#define CXL_MEM_COMMAND_FLAG_MASK GENMASK(0, 0)
+
+	__s32 size_in;
+	__s32 size_out;
+};
+
+/**
+ * struct cxl_mem_query_commands - Query supported commands.
+ * @n_commands: In/out parameter. When @n_commands is > 0, the driver will
+ *		return min(num_support_commands, n_commands). When @n_commands
+ *		is 0, driver will return the number of total supported commands.
+ * @rsvd: Reserved for future use.
+ * @commands: Output array of supported commands. This array must be allocated
+ *            by userspace to be at least min(num_support_commands, @n_commands)
+ *
+ * Allow userspace to query the available commands supported by both the driver,
+ * and the hardware. Commands that aren't supported by either the driver, or the
+ * hardware are not returned in the query.
+ *
+ * Examples:
+ *
+ *  - { .n_commands = 0 } // Get number of supported commands
+ *  - { .n_commands = 15, .commands = buf } // Return first 15 (or less)
+ *    supported commands
+ *
+ *  See struct cxl_command_info.
+ */
+struct cxl_mem_query_commands {
+	/*
+	 * Input: Number of commands to return (space allocated by user)
+	 * Output: Number of commands supported by the driver/hardware
+	 *
+	 * If n_commands is 0, kernel will only return number of commands and
+	 * not try to populate commands[], thus allowing userspace to know how
+	 * much space to allocate
+	 */
+	__u32 n_commands;
+	__u32 rsvd;
+
+	struct cxl_command_info __user commands[]; /* out: supported commands */
+};
+
+/**
+ * struct cxl_send_command - Send a command to a memory device.
+ * @id: The command to send to the memory device. This must be one of the
+ *	commands returned by the query command.
+ * @flags: Flags for the command (input).
+ * @raw: Special fields for raw commands
+ * @raw.opcode: Opcode passed to hardware when using the RAW command.
+ * @raw.rsvd: Must be zero.
+ * @rsvd: Must be zero.
+ * @retval: Return value from the memory device (output).
+ * @in: Parameters associated with input payload.
+ * @in.size: Size of the payload to provide to the device (input).
+ * @in.rsvd: Must be zero.
+ * @in.payload: Pointer to memory for payload input, payload is little endian.
+ * @out: Parameters associated with output payload.
+ * @out.size: Size of the payload received from the device (input/output). This
+ *	      field is filled in by userspace to let the driver know how much
+ *	      space was allocated for output. It is populated by the driver to
+ *	      let userspace know how large the output payload actually was.
+ * @out.rsvd: Must be zero.
+ * @out.payload: Pointer to memory for payload output, payload is little endian.
+ *
+ * Mechanism for userspace to send a command to the hardware for processing. The
+ * driver will do basic validation on the command sizes. In some cases even the
+ * payload may be introspected. Userspace is required to allocate large enough
+ * buffers for size_out which can be variable length in certain situations.
+ */
+struct cxl_send_command {
+	__u32 id;
+	__u32 flags;
+	union {
+		struct {
+			__u16 opcode;
+			__u16 rsvd;
+		} raw;
+		__u32 rsvd;
+	};
+	__u32 retval;
+
+	struct {
+		__s32 size;
+		__u32 rsvd;
+		__u64 payload;
+	} in;
+
+	struct {
+		__s32 size;
+		__u32 rsvd;
+		__u64 payload;
+	} out;
+};
+
+#endif