Merge tag 'phy-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

phy: for 5.3

  *) Add a new PHY driver for Qualcomm PCIe2 PHY
  *) Add a new PHY driver for Mixel DPHY present in i.MX8
  *) Fix Qualcomm QMP UFS PHY driver from incorrectly reporting that
     PHY enable failed
  *) Fix _BUG_ on Amlogic G12A USB3 + PCIE Combo PHY Driver due to
     calling a sleeping function from invalid context
  *) Fix WARN_ON dump on rcar-gen3-usb2 PHY driver caused due to
     imbalance powered flag
  *) Fix .cocci and sparse warnings

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

* tag 'phy-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy:
  phy: qcom-qmp: Raise qcom_qmp_phy_enable() polling delay
  phy: meson-g12a-usb3-pcie: disable locking for cr_regmap
  phy: Add driver for mixel mipi dphy found on NXP's i.MX8 SoCs
  dt-bindings: phy: Add documentation for mixel dphy
  dt-bindings: phy-pxa-usb: add bindings
  phy: renesas: rcar-gen3-usb2: fix imbalance powered flag
  phy: qcom-qmp: Drop useless msm8998_pciephy_cfg setting
  phy: qcom-qmp: Correct READY_STATUS poll break condition
  phy: ti: am654-serdes: Make serdes_am654_xlate() static
  phy: usb: phy-brcm-usb: Fix platform_no_drv_owner.cocci warnings
  phy: samsung: Use struct_size() in devm_kzalloc()
  phy: qcom: Add Qualcomm PCIe2 PHY driver
  dt-bindings: phy: Add binding for Qualcomm PCIe2 PHY

15 files changed, 960 insertions, 13 deletions

diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
new file mode 100644
index 000000000000..9b23407233c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
@@ -0,0 +1,29 @@
+Mixel DSI PHY for i.MX8
+
+The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the
+MIPI-DSI IP from Northwest Logic). It represents the physical layer for the
+electrical signals for DSI.
+
+Required properties:
+- compatible: Must be:
+  - "fsl,imx8mq-mipi-dphy"
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Must contain the following entries:
+  - "phy_ref": phandle and specifier referring to the DPHY ref clock
+- reg: the register range of the PHY controller
+- #phy-cells: number of cells in PHY, as defined in
+  Documentation/devicetree/bindings/phy/phy-bindings.txt
+  this must be <0>
+
+Optional properties:
+- power-domains: phandle to power domain
+
+Example:
+	dphy: dphy@30a0030 {
+		compatible = "fsl,imx8mq-mipi-dphy";
+		clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+		clock-names = "phy_ref";
+		reg = <0x30a00300 0x100>;
+		power-domains = <&pd_mipi0>;
+		#phy-cells = <0>;
+        };
diff --git a/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt b/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt
new file mode 100644
index 000000000000..93fc09c12954
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt
@@ -0,0 +1,18 @@
+Marvell PXA USB PHY
+-------------------
+
+Required properties:
+- compatible: one of: "marvell,mmp2-usb-phy", "marvell,pxa910-usb-phy",
+	"marvell,pxa168-usb-phy",
+- #phy-cells: must be 0
+
+Example:
+	usb-phy: usbphy@d4207000 {
+		compatible = "marvell,mmp2-usb-phy";
+		reg = <0xd4207000 0x40>;
+		#phy-cells = <0>;
+		status = "okay";
+	};
+
+This document explains the device tree binding. For general
+information about PHY subsystem refer to Documentation/phy.txt
diff --git a/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt
new file mode 100644
index 000000000000..30064253f290
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt
@@ -0,0 +1,42 @@
+Qualcomm PCIe2 PHY controller
+=============================
+
+The Qualcomm PCIe2 PHY is a Synopsys based phy found in a number of Qualcomm
+platforms.
+
+Required properties:
+ - compatible: compatible list, should be:
+	       "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy"
+
+ - reg: offset and length of the PHY register set.
+ - #phy-cells: must be 0.
+
+ - clocks: a clock-specifier pair for the "pipe" clock
+
+ - vdda-vp-supply: phandle to low voltage regulator
+ - vdda-vph-supply: phandle to high voltage regulator
+
+ - resets: reset-specifier pairs for the "phy" and "pipe" resets
+ - reset-names: list of resets, should contain:
+		"phy" and "pipe"
+
+ - clock-output-names: name of the outgoing clock signal from the PHY PLL
+ - #clock-cells: must be 0
+
+Example:
+ phy@7786000 {
+	compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy";
+	reg = <0x07786000 0xb8>;
+
+	clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+	resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>,
+	         <&gcc GCC_PCIE_0_PIPE_ARES>;
+	reset-names = "phy", "pipe";
+
+	vdda-vp-supply = <&vreg_l3_1p05>;
+	vdda-vph-supply = <&vreg_l5_1p8>;
+
+	clock-output-names = "pcie_0_pipe_clk";
+	#clock-cells = <0>;
+	#phy-cells = <0>;
+ };
diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
index 6233a7979a93..ac322d643c7a 100644
--- a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
+++ b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
@@ -188,7 +188,7 @@ static const struct regmap_config phy_g12a_usb3_pcie_cr_regmap_conf = {
 	.reg_read = phy_g12a_usb3_pcie_cr_bus_read,
 	.reg_write = phy_g12a_usb3_pcie_cr_bus_write,
 	.max_register = 0xffff,
-	.fast_io = true,
+	.disable_locking = true,
 };
 
 static int phy_g12a_usb3_init(struct phy *phy)
diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c
index fc7df391d48f..f5c1f2983a1d 100644
--- a/drivers/phy/broadcom/phy-brcm-usb.c
+++ b/drivers/phy/broadcom/phy-brcm-usb.c
@@ -443,7 +443,6 @@ static struct platform_driver brcm_usb_driver = {
 	.remove		= brcm_usb_phy_remove,
 	.driver		= {
 		.name	= "brcmstb-usb-phy",
-		.owner	= THIS_MODULE,
 		.pm = &brcm_usb_phy_pm_ops,
 		.of_match_table = brcm_usb_dt_ids,
 	},
diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
index f435d6406943..320630ffe3cd 100644
--- a/drivers/phy/freescale/Kconfig
+++ b/drivers/phy/freescale/Kconfig
@@ -4,3 +4,13 @@ config PHY_FSL_IMX8MQ_USB
 	depends on OF && HAS_IOMEM
 	select GENERIC_PHY
 	default ARCH_MXC && ARM64
+
+config PHY_MIXEL_MIPI_DPHY
+	tristate "Mixel MIPI DSI PHY support"
+	depends on OF && HAS_IOMEM
+	select GENERIC_PHY
+	select GENERIC_PHY_MIPI_DPHY
+	select REGMAP_MMIO
+	help
+	  Enable this to add support for the Mixel DSI PHY as found
+	  on NXP's i.MX8 family of SOCs.
diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile
index a459a44f6ecd..1d02e3869b45 100644
--- a/drivers/phy/freescale/Makefile
+++ b/drivers/phy/freescale/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_PHY_FSL_IMX8MQ_USB)	+= phy-fsl-imx8mq-usb.o
+obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY)	+= phy-fsl-imx8-mipi-dphy.o
diff --git a/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c b/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
new file mode 100644
index 000000000000..9f2c1da14f5a
--- /dev/null
+++ b/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
@@ -0,0 +1,497 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2017,2018 NXP
+ * Copyright 2019 Purism SPC
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* DPHY registers */
+#define DPHY_PD_DPHY			0x00
+#define DPHY_M_PRG_HS_PREPARE		0x04
+#define DPHY_MC_PRG_HS_PREPARE		0x08
+#define DPHY_M_PRG_HS_ZERO		0x0c
+#define DPHY_MC_PRG_HS_ZERO		0x10
+#define DPHY_M_PRG_HS_TRAIL		0x14
+#define DPHY_MC_PRG_HS_TRAIL		0x18
+#define DPHY_PD_PLL			0x1c
+#define DPHY_TST			0x20
+#define DPHY_CN				0x24
+#define DPHY_CM				0x28
+#define DPHY_CO				0x2c
+#define DPHY_LOCK			0x30
+#define DPHY_LOCK_BYP			0x34
+#define DPHY_REG_BYPASS_PLL		0x4C
+
+#define MBPS(x) ((x) * 1000000)
+
+#define DATA_RATE_MAX_SPEED MBPS(1500)
+#define DATA_RATE_MIN_SPEED MBPS(80)
+
+#define PLL_LOCK_SLEEP 10
+#define PLL_LOCK_TIMEOUT 1000
+
+#define CN_BUF	0xcb7a89c0
+#define CO_BUF	0x63
+#define CM(x)	(				  \
+		((x) <	32) ? 0xe0 | ((x) - 16) : \
+		((x) <	64) ? 0xc0 | ((x) - 32) : \
+		((x) < 128) ? 0x80 | ((x) - 64) : \
+		((x) - 128))
+#define CN(x)	(((x) == 1) ? 0x1f : (((CN_BUF) >> ((x) - 1)) & 0x1f))
+#define CO(x)	((CO_BUF) >> (8 - (x)) & 0x03)
+
+/* PHY power on is active low */
+#define PWR_ON	0
+#define PWR_OFF	1
+
+enum mixel_dphy_devtype {
+	MIXEL_IMX8MQ,
+};
+
+struct mixel_dphy_devdata {
+	u8 reg_tx_rcal;
+	u8 reg_auto_pd_en;
+	u8 reg_rxlprp;
+	u8 reg_rxcdrp;
+	u8 reg_rxhs_settle;
+};
+
+static const struct mixel_dphy_devdata mixel_dphy_devdata[] = {
+	[MIXEL_IMX8MQ] = {
+		.reg_tx_rcal = 0x38,
+		.reg_auto_pd_en = 0x3c,
+		.reg_rxlprp = 0x40,
+		.reg_rxcdrp = 0x44,
+		.reg_rxhs_settle = 0x48,
+	},
+};
+
+struct mixel_dphy_cfg {
+	/* DPHY PLL parameters */
+	u32 cm;
+	u32 cn;
+	u32 co;
+	/* DPHY register values */
+	u8 mc_prg_hs_prepare;
+	u8 m_prg_hs_prepare;
+	u8 mc_prg_hs_zero;
+	u8 m_prg_hs_zero;
+	u8 mc_prg_hs_trail;
+	u8 m_prg_hs_trail;
+	u8 rxhs_settle;
+};
+
+struct mixel_dphy_priv {
+	struct mixel_dphy_cfg cfg;
+	struct regmap *regmap;
+	struct clk *phy_ref_clk;
+	const struct mixel_dphy_devdata *devdata;
+};
+
+static const struct regmap_config mixel_dphy_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = DPHY_REG_BYPASS_PLL,
+	.name = "mipi-dphy",
+};
+
+static int phy_write(struct phy *phy, u32 value, unsigned int reg)
+{
+	struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = regmap_write(priv->regmap, reg, value);
+	if (ret < 0)
+		dev_err(&phy->dev, "Failed to write DPHY reg %d: %d\n", reg,
+			ret);
+	return ret;
+}
+
+/*
+ * Find a ratio close to the desired one using continued fraction
+ * approximation ending either at exact match or maximum allowed
+ * nominator, denominator.
+ */
+static void get_best_ratio(u32 *pnum, u32 *pdenom, u32 max_n, u32 max_d)
+{
+	u32 a = *pnum;
+	u32 b = *pdenom;
+	u32 c;
+	u32 n[] = {0, 1};
+	u32 d[] = {1, 0};
+	u32 whole;
+	unsigned int i = 1;
+
+	while (b) {
+		i ^= 1;
+		whole = a / b;
+		n[i] += (n[i ^ 1] * whole);
+		d[i] += (d[i ^ 1] * whole);
+		if ((n[i] > max_n) || (d[i] > max_d)) {
+			i ^= 1;
+			break;
+		}
+		c = a - (b * whole);
+		a = b;
+		b = c;
+	}
+	*pnum = n[i];
+	*pdenom = d[i];
+}
+
+static int mixel_dphy_config_from_opts(struct phy *phy,
+	       struct phy_configure_opts_mipi_dphy *dphy_opts,
+	       struct mixel_dphy_cfg *cfg)
+{
+	struct mixel_dphy_priv *priv = dev_get_drvdata(phy->dev.parent);
+	unsigned long ref_clk = clk_get_rate(priv->phy_ref_clk);
+	u32 lp_t, numerator, denominator;
+	unsigned long long tmp;
+	u32 n;
+	int i;
+
+	if (dphy_opts->hs_clk_rate > DATA_RATE_MAX_SPEED ||
+	    dphy_opts->hs_clk_rate < DATA_RATE_MIN_SPEED)
+		return -EINVAL;
+
+	numerator = dphy_opts->hs_clk_rate;
+	denominator = ref_clk;
+	get_best_ratio(&numerator, &denominator, 255, 256);
+	if (!numerator || !denominator) {
+		dev_err(&phy->dev, "Invalid %d/%d for %ld/%ld\n",
+			numerator, denominator,
+			dphy_opts->hs_clk_rate, ref_clk);
+		return -EINVAL;
+	}
+
+	while ((numerator < 16) && (denominator <= 128)) {
+		numerator <<= 1;
+		denominator <<= 1;
+	}
+	/*
+	 * CM ranges between 16 and 255
+	 * CN ranges between 1 and 32
+	 * CO is power of 2: 1, 2, 4, 8
+	 */
+	i = __ffs(denominator);
+	if (i > 3)
+		i = 3;
+	cfg->cn = denominator >> i;
+	cfg->co = 1 << i;
+	cfg->cm = numerator;
+
+	if (cfg->cm < 16 || cfg->cm > 255 ||
+	    cfg->cn < 1 || cfg->cn > 32 ||
+	    cfg->co < 1 || cfg->co > 8) {
+		dev_err(&phy->dev, "Invalid CM/CN/CO values: %u/%u/%u\n",
+			cfg->cm, cfg->cn, cfg->co);
+		dev_err(&phy->dev, "for hs_clk/ref_clk=%ld/%ld ~ %d/%d\n",
+			dphy_opts->hs_clk_rate, ref_clk,
+			numerator, denominator);
+		return -EINVAL;
+	}
+
+	dev_dbg(&phy->dev, "hs_clk/ref_clk=%ld/%ld ~ %d/%d\n",
+		dphy_opts->hs_clk_rate, ref_clk, numerator, denominator);
+
+	/* LP clock period */
+	tmp = 1000000000000LL;
+	do_div(tmp, dphy_opts->lp_clk_rate); /* ps */
+	if (tmp > ULONG_MAX)
+		return -EINVAL;
+
+	lp_t = tmp;
+	dev_dbg(&phy->dev, "LP clock %lu, period: %u ps\n",
+		dphy_opts->lp_clk_rate, lp_t);
+
+	/* hs_prepare: in lp clock periods */
+	if (2 * dphy_opts->hs_prepare > 5 * lp_t) {
+		dev_err(&phy->dev,
+			"hs_prepare (%u) > 2.5 * lp clock period (%u)\n",
+			dphy_opts->hs_prepare, lp_t);
+		return -EINVAL;
+	}
+	/* 00: lp_t, 01: 1.5 * lp_t, 10: 2 * lp_t, 11: 2.5 * lp_t */
+	if (dphy_opts->hs_prepare < lp_t) {
+		n = 0;
+	} else {
+		tmp = 2 * (dphy_opts->hs_prepare - lp_t);
+		do_div(tmp, lp_t);
+		n = tmp;
+	}
+	cfg->m_prg_hs_prepare = n;
+
+	/* clk_prepare: in lp clock periods */
+	if (2 * dphy_opts->clk_prepare > 3 * lp_t) {
+		dev_err(&phy->dev,
+			"clk_prepare (%u) > 1.5 * lp clock period (%u)\n",
+			dphy_opts->clk_prepare, lp_t);
+		return -EINVAL;
+	}
+	/* 00: lp_t, 01: 1.5 * lp_t */
+	cfg->mc_prg_hs_prepare = dphy_opts->clk_prepare > lp_t ? 1 : 0;
+
+	/* hs_zero: formula from NXP BSP */
+	n = (144 * (dphy_opts->hs_clk_rate / 1000000) - 47500) / 10000;
+	cfg->m_prg_hs_zero = n < 1 ? 1 : n;
+
+	/* clk_zero: formula from NXP BSP */
+	n = (34 * (dphy_opts->hs_clk_rate / 1000000) - 2500) / 1000;
+	cfg->mc_prg_hs_zero = n < 1 ? 1 : n;
+
+	/* clk_trail, hs_trail: formula from NXP BSP */
+	n = (103 * (dphy_opts->hs_clk_rate / 1000000) + 10000) / 10000;
+	if (n > 15)
+		n = 15;
+	if (n < 1)
+		n = 1;
+	cfg->m_prg_hs_trail = n;
+	cfg->mc_prg_hs_trail = n;
+
+	/* rxhs_settle: formula from NXP BSP */
+	if (dphy_opts->hs_clk_rate < MBPS(80))
+		cfg->rxhs_settle = 0x0d;
+	else if (dphy_opts->hs_clk_rate < MBPS(90))
+		cfg->rxhs_settle = 0x0c;
+	else if (dphy_opts->hs_clk_rate < MBPS(125))
+		cfg->rxhs_settle = 0x0b;
+	else if (dphy_opts->hs_clk_rate < MBPS(150))
+		cfg->rxhs_settle = 0x0a;
+	else if (dphy_opts->hs_clk_rate < MBPS(225))
+		cfg->rxhs_settle = 0x09;
+	else if (dphy_opts->hs_clk_rate < MBPS(500))
+		cfg->rxhs_settle = 0x08;
+	else
+		cfg->rxhs_settle = 0x07;
+
+	dev_dbg(&phy->dev, "phy_config: %u %u %u %u %u %u %u\n",
+		cfg->m_prg_hs_prepare, cfg->mc_prg_hs_prepare,
+		cfg->m_prg_hs_zero, cfg->mc_prg_hs_zero,
+		cfg->m_prg_hs_trail, cfg->mc_prg_hs_trail,
+		cfg->rxhs_settle);
+
+	return 0;
+}
+
+static void mixel_phy_set_hs_timings(struct phy *phy)
+{
+	struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+
+	phy_write(phy, priv->cfg.m_prg_hs_prepare, DPHY_M_PRG_HS_PREPARE);
+	phy_write(phy, priv->cfg.mc_prg_hs_prepare, DPHY_MC_PRG_HS_PREPARE);
+	phy_write(phy, priv->cfg.m_prg_hs_zero, DPHY_M_PRG_HS_ZERO);
+	phy_write(phy, priv->cfg.mc_prg_hs_zero, DPHY_MC_PRG_HS_ZERO);
+	phy_write(phy, priv->cfg.m_prg_hs_trail, DPHY_M_PRG_HS_TRAIL);
+	phy_write(phy, priv->cfg.mc_prg_hs_trail, DPHY_MC_PRG_HS_TRAIL);
+	phy_write(phy, priv->cfg.rxhs_settle, priv->devdata->reg_rxhs_settle);
+}
+
+static int mixel_dphy_set_pll_params(struct phy *phy)
+{
+	struct mixel_dphy_priv *priv = dev_get_drvdata(phy->dev.parent);
+
+	if (priv->cfg.cm < 16 || priv->cfg.cm > 255 ||
+	    priv->cfg.cn < 1 || priv->cfg.cn > 32 ||
+	    priv->cfg.co < 1 || priv->cfg.co > 8) {
+		dev_err(&phy->dev, "Invalid CM/CN/CO values! (%u/%u/%u)\n",
+			priv->cfg.cm, priv->cfg.cn, priv->cfg.co);
+		return -EINVAL;
+	}
+	dev_dbg(&phy->dev, "Using CM:%u CN:%u CO:%u\n",
+		priv->cfg.cm, priv->cfg.cn, priv->cfg.co);
+	phy_write(phy, CM(priv->cfg.cm), DPHY_CM);
+	phy_write(phy, CN(priv->cfg.cn), DPHY_CN);
+	phy_write(phy, CO(priv->cfg.co), DPHY_CO);
+	return 0;
+}
+
+static int mixel_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
+{
+	struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+	struct mixel_dphy_cfg cfg = { 0 };
+	int ret;
+
+	ret = mixel_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg);
+	if (ret)
+		return ret;
+
+	/* Update the configuration */
+	memcpy(&priv->cfg, &cfg, sizeof(struct mixel_dphy_cfg));
+
+	phy_write(phy, 0x00, DPHY_LOCK_BYP);
+	phy_write(phy, 0x01, priv->devdata->reg_tx_rcal);
+	phy_write(phy, 0x00, priv->devdata->reg_auto_pd_en);
+	phy_write(phy, 0x02, priv->devdata->reg_rxlprp);
+	phy_write(phy, 0x02, priv->devdata->reg_rxcdrp);
+	phy_write(phy, 0x25, DPHY_TST);
+
+	mixel_phy_set_hs_timings(phy);
+	ret = mixel_dphy_set_pll_params(phy);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int mixel_dphy_validate(struct phy *phy, enum phy_mode mode, int submode,
+			       union phy_configure_opts *opts)
+{
+	struct mixel_dphy_cfg cfg = { 0 };
+
+	if (mode != PHY_MODE_MIPI_DPHY)
+		return -EINVAL;
+
+	return mixel_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg);
+}
+
+static int mixel_dphy_init(struct phy *phy)
+{
+	phy_write(phy, PWR_OFF, DPHY_PD_PLL);
+	phy_write(phy, PWR_OFF, DPHY_PD_DPHY);
+
+	return 0;
+}
+
+static int mixel_dphy_exit(struct phy *phy)
+{
+	phy_write(phy, 0, DPHY_CM);
+	phy_write(phy, 0, DPHY_CN);
+	phy_write(phy, 0, DPHY_CO);
+
+	return 0;
+}
+
+static int mixel_dphy_power_on(struct phy *phy)
+{
+	struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+	u32 locked;
+	int ret;
+
+	ret = clk_prepare_enable(priv->phy_ref_clk);
+	if (ret < 0)
+		return ret;
+
+	phy_write(phy, PWR_ON, DPHY_PD_PLL);
+	ret = regmap_read_poll_timeout(priv->regmap, DPHY_LOCK, locked,
+				       locked, PLL_LOCK_SLEEP,
+				       PLL_LOCK_TIMEOUT);
+	if (ret < 0) {
+		dev_err(&phy->dev, "Could not get DPHY lock (%d)!\n", ret);
+		goto clock_disable;
+	}
+	phy_write(phy, PWR_ON, DPHY_PD_DPHY);
+
+	return 0;
+clock_disable:
+	clk_disable_unprepare(priv->phy_ref_clk);
+	return ret;
+}
+
+static int mixel_dphy_power_off(struct phy *phy)
+{
+	struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+
+	phy_write(phy, PWR_OFF, DPHY_PD_PLL);
+	phy_write(phy, PWR_OFF, DPHY_PD_DPHY);
+
+	clk_disable_unprepare(priv->phy_ref_clk);
+
+	return 0;
+}
+
+static const struct phy_ops mixel_dphy_phy_ops = {
+	.init = mixel_dphy_init,
+	.exit = mixel_dphy_exit,
+	.power_on = mixel_dphy_power_on,
+	.power_off = mixel_dphy_power_off,
+	.configure = mixel_dphy_configure,
+	.validate = mixel_dphy_validate,
+	.owner = THIS_MODULE,
+};
+
+static const struct of_device_id mixel_dphy_of_match[] = {
+	{ .compatible = "fsl,imx8mq-mipi-dphy",
+	  .data = &mixel_dphy_devdata[MIXEL_IMX8MQ] },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mixel_dphy_of_match);
+
+static int mixel_dphy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct phy_provider *phy_provider;
+	struct mixel_dphy_priv *priv;
+	struct resource *res;
+	struct phy *phy;
+	void __iomem *base;
+
+	if (!np)
+		return -ENODEV;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->devdata = of_device_get_match_data(&pdev->dev);
+	if (!priv->devdata)
+		return -EINVAL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
+					     &mixel_dphy_regmap_config);
+	if (IS_ERR(priv->regmap)) {
+		dev_err(dev, "Couldn't create the DPHY regmap\n");
+		return PTR_ERR(priv->regmap);
+	}
+
+	priv->phy_ref_clk = devm_clk_get(&pdev->dev, "phy_ref");
+	if (IS_ERR(priv->phy_ref_clk)) {
+		dev_err(dev, "No phy_ref clock found\n");
+		return PTR_ERR(priv->phy_ref_clk);
+	}
+	dev_dbg(dev, "phy_ref clock rate: %lu\n",
+		clk_get_rate(priv->phy_ref_clk));
+
+	dev_set_drvdata(dev, priv);
+
+	phy = devm_phy_create(dev, np, &mixel_dphy_phy_ops);
+	if (IS_ERR(phy)) {
+		dev_err(dev, "Failed to create phy %ld\n", PTR_ERR(phy));
+		return PTR_ERR(phy);
+	}
+	phy_set_drvdata(phy, priv);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver mixel_dphy_driver = {
+	.probe	= mixel_dphy_probe,
+	.driver = {
+		.name = "mixel-mipi-dphy",
+		.of_match_table	= mixel_dphy_of_match,
+	}
+};
+module_platform_driver(mixel_dphy_driver);
+
+MODULE_AUTHOR("NXP Semiconductor");
+MODULE_DESCRIPTION("Mixel MIPI-DSI PHY driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
index eb49864a6bad..e46824da29f6 100644
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
@@ -25,6 +25,14 @@ config PHY_QCOM_IPQ806X_SATA
 	depends on OF
 	select GENERIC_PHY
 
+config PHY_QCOM_PCIE2
+	tristate "Qualcomm PCIe Gen2 PHY Driver"
+	depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
+	select GENERIC_PHY
+	help
+	  Enable this to support the Qualcomm PCIe PHY, used with the Synopsys
+	  based PCIe controller.
+
 config PHY_QCOM_QMP
 	tristate "Qualcomm QMP PHY Driver"
 	depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile
index c56efd3af205..283251d6a5d9 100644
--- a/drivers/phy/qualcomm/Makefile
+++ b/drivers/phy/qualcomm/Makefile
@@ -2,6 +2,7 @@
 obj-$(CONFIG_PHY_ATH79_USB)		+= phy-ath79-usb.o
 obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)	+= phy-qcom-apq8064-sata.o
 obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
+obj-$(CONFIG_PHY_QCOM_PCIE2)		+= phy-qcom-pcie2.o
 obj-$(CONFIG_PHY_QCOM_QMP)		+= phy-qcom-qmp.o
 obj-$(CONFIG_PHY_QCOM_QUSB2)		+= phy-qcom-qusb2.o
 obj-$(CONFIG_PHY_QCOM_UFS)		+= phy-qcom-ufs.o
diff --git a/drivers/phy/qualcomm/phy-qcom-pcie2.c b/drivers/phy/qualcomm/phy-qcom-pcie2.c
new file mode 100644
index 000000000000..9dba3594e6d9
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-pcie2.c
@@ -0,0 +1,331 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014-2017, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019, Linaro Ltd.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/phy/phy.h>
+
+#define PCIE20_PARF_PHY_STTS         0x3c
+#define PCIE2_PHY_RESET_CTRL         0x44
+#define PCIE20_PARF_PHY_REFCLK_CTRL2 0xa0
+#define PCIE20_PARF_PHY_REFCLK_CTRL3 0xa4
+#define PCIE20_PARF_PCS_SWING_CTRL1  0x88
+#define PCIE20_PARF_PCS_SWING_CTRL2  0x8c
+#define PCIE20_PARF_PCS_DEEMPH1      0x74
+#define PCIE20_PARF_PCS_DEEMPH2      0x78
+#define PCIE20_PARF_PCS_DEEMPH3      0x7c
+#define PCIE20_PARF_CONFIGBITS       0x84
+#define PCIE20_PARF_PHY_CTRL3        0x94
+#define PCIE20_PARF_PCS_CTRL         0x80
+
+#define TX_AMP_VAL                   120
+#define PHY_RX0_EQ_GEN1_VAL          0
+#define PHY_RX0_EQ_GEN2_VAL          4
+#define TX_DEEMPH_GEN1_VAL           24
+#define TX_DEEMPH_GEN2_3_5DB_VAL     26
+#define TX_DEEMPH_GEN2_6DB_VAL       36
+#define PHY_TX0_TERM_OFFST_VAL       0
+
+struct qcom_phy {
+	struct device *dev;
+	void __iomem *base;
+
+	struct regulator_bulk_data vregs[2];
+
+	struct reset_control *phy_reset;
+	struct reset_control *pipe_reset;
+	struct clk *pipe_clk;
+};
+
+static int qcom_pcie2_phy_init(struct phy *phy)
+{
+	struct qcom_phy *qphy = phy_get_drvdata(phy);
+	int ret;
+
+	ret = reset_control_deassert(qphy->phy_reset);
+	if (ret) {
+		dev_err(qphy->dev, "cannot deassert pipe reset\n");
+		return ret;
+	}
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
+	if (ret)
+		reset_control_assert(qphy->phy_reset);
+
+	return ret;
+}
+
+static int qcom_pcie2_phy_power_on(struct phy *phy)
+{
+	struct qcom_phy *qphy = phy_get_drvdata(phy);
+	int ret;
+	u32 val;
+
+	/* Program REF_CLK source */
+	val = readl(qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL2);
+	val &= ~BIT(1);
+	writel(val, qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL2);
+
+	usleep_range(1000, 2000);
+
+	/* Don't use PAD for refclock */
+	val = readl(qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL2);
+	val &= ~BIT(0);
+	writel(val, qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL2);
+
+	/* Program SSP ENABLE */
+	val = readl(qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL3);
+	val |= BIT(0);
+	writel(val, qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL3);
+
+	usleep_range(1000, 2000);
+
+	/* Assert Phy SW Reset */
+	val = readl(qphy->base + PCIE2_PHY_RESET_CTRL);
+	val |= BIT(0);
+	writel(val, qphy->base + PCIE2_PHY_RESET_CTRL);
+
+	/* Program Tx Amplitude */
+	val = readl(qphy->base + PCIE20_PARF_PCS_SWING_CTRL1);
+	val &= ~0x7f;
+	val |= TX_AMP_VAL;
+	writel(val, qphy->base + PCIE20_PARF_PCS_SWING_CTRL1);
+
+	val = readl(qphy->base + PCIE20_PARF_PCS_SWING_CTRL2);
+	val &= ~0x7f;
+	val |= TX_AMP_VAL;
+	writel(val, qphy->base + PCIE20_PARF_PCS_SWING_CTRL2);
+
+	/* Program De-Emphasis */
+	val = readl(qphy->base + PCIE20_PARF_PCS_DEEMPH1);
+	val &= ~0x3f;
+	val |= TX_DEEMPH_GEN2_6DB_VAL;
+	writel(val, qphy->base + PCIE20_PARF_PCS_DEEMPH1);
+
+	val = readl(qphy->base + PCIE20_PARF_PCS_DEEMPH2);
+	val &= ~0x3f;
+	val |= TX_DEEMPH_GEN2_3_5DB_VAL;
+	writel(val, qphy->base + PCIE20_PARF_PCS_DEEMPH2);
+
+	val = readl(qphy->base + PCIE20_PARF_PCS_DEEMPH3);
+	val &= ~0x3f;
+	val |= TX_DEEMPH_GEN1_VAL;
+	writel(val, qphy->base + PCIE20_PARF_PCS_DEEMPH3);
+
+	/* Program Rx_Eq */
+	val = readl(qphy->base + PCIE20_PARF_CONFIGBITS);
+	val &= ~0x7;
+	val |= PHY_RX0_EQ_GEN2_VAL;
+	writel(val, qphy->base + PCIE20_PARF_CONFIGBITS);
+
+	/* Program Tx0_term_offset */
+	val = readl(qphy->base + PCIE20_PARF_PHY_CTRL3);
+	val &= ~0x1f;
+	val |= PHY_TX0_TERM_OFFST_VAL;
+	writel(val, qphy->base + PCIE20_PARF_PHY_CTRL3);
+
+	/* disable Tx2Rx Loopback */
+	val = readl(qphy->base + PCIE20_PARF_PCS_CTRL);
+	val &= ~BIT(1);
+	writel(val, qphy->base + PCIE20_PARF_PCS_CTRL);
+
+	/* De-assert Phy SW Reset */
+	val = readl(qphy->base + PCIE2_PHY_RESET_CTRL);
+	val &= ~BIT(0);
+	writel(val, qphy->base + PCIE2_PHY_RESET_CTRL);
+
+	usleep_range(1000, 2000);
+
+	ret = reset_control_deassert(qphy->pipe_reset);
+	if (ret) {
+		dev_err(qphy->dev, "cannot deassert pipe reset\n");
+		goto out;
+	}
+
+	clk_set_rate(qphy->pipe_clk, 250000000);
+
+	ret = clk_prepare_enable(qphy->pipe_clk);
+	if (ret) {
+		dev_err(qphy->dev, "failed to enable pipe clock\n");
+		goto out;
+	}
+
+	ret = readl_poll_timeout(qphy->base + PCIE20_PARF_PHY_STTS, val,
+				 !(val & BIT(0)), 1000, 10);
+	if (ret)
+		dev_err(qphy->dev, "phy initialization failed\n");
+
+out:
+	return ret;
+}
+
+static int qcom_pcie2_phy_power_off(struct phy *phy)
+{
+	struct qcom_phy *qphy = phy_get_drvdata(phy);
+	u32 val;
+
+	val = readl(qphy->base + PCIE2_PHY_RESET_CTRL);
+	val |= BIT(0);
+	writel(val, qphy->base + PCIE2_PHY_RESET_CTRL);
+
+	clk_disable_unprepare(qphy->pipe_clk);
+	reset_control_assert(qphy->pipe_reset);
+
+	return 0;
+}
+
+static int qcom_pcie2_phy_exit(struct phy *phy)
+{
+	struct qcom_phy *qphy = phy_get_drvdata(phy);
+
+	regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
+	reset_control_assert(qphy->phy_reset);
+
+	return 0;
+}
+
+static const struct phy_ops qcom_pcie2_ops = {
+	.init = qcom_pcie2_phy_init,
+	.power_on = qcom_pcie2_phy_power_on,
+	.power_off = qcom_pcie2_phy_power_off,
+	.exit = qcom_pcie2_phy_exit,
+	.owner = THIS_MODULE,
+};
+
+/*
+ * Register a fixed rate pipe clock.
+ *
+ * The <s>_pipe_clksrc generated by PHY goes to the GCC that gate
+ * controls it. The <s>_pipe_clk coming out of the GCC is requested
+ * by the PHY driver for its operations.
+ * We register the <s>_pipe_clksrc here. The gcc driver takes care
+ * of assigning this <s>_pipe_clksrc as parent to <s>_pipe_clk.
+ * Below picture shows this relationship.
+ *
+ *         +---------------+
+ *         |   PHY block   |<<---------------------------------------+
+ *         |               |                                         |
+ *         |   +-------+   |                   +-----+               |
+ *   I/P---^-->|  PLL  |---^--->pipe_clksrc--->| GCC |--->pipe_clk---+
+ *    clk  |   +-------+   |                   +-----+
+ *         +---------------+
+ */
+static int phy_pipe_clksrc_register(struct qcom_phy *qphy)
+{
+	struct device_node *np = qphy->dev->of_node;
+	struct clk_fixed_rate *fixed;
+	struct clk_init_data init = { };
+	int ret;
+
+	ret = of_property_read_string(np, "clock-output-names", &init.name);
+	if (ret) {
+		dev_err(qphy->dev, "%s: No clock-output-names\n", np->name);
+		return ret;
+	}
+
+	fixed = devm_kzalloc(qphy->dev, sizeof(*fixed), GFP_KERNEL);
+	if (!fixed)
+		return -ENOMEM;
+
+	init.ops = &clk_fixed_rate_ops;
+
+	/* controllers using QMP phys use 250MHz pipe clock interface */
+	fixed->fixed_rate = 250000000;
+	fixed->hw.init = &init;
+
+	return devm_clk_hw_register(qphy->dev, &fixed->hw);
+}
+
+static int qcom_pcie2_phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct qcom_phy *qphy;
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	struct phy *phy;
+	int ret;
+
+	qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
+	if (!qphy)
+		return -ENOMEM;
+
+	qphy->dev = dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	qphy->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(qphy->base))
+		return PTR_ERR(qphy->base);
+
+	ret = phy_pipe_clksrc_register(qphy);
+	if (ret) {
+		dev_err(dev, "failed to register pipe_clk\n");
+		return ret;
+	}
+
+	qphy->vregs[0].supply = "vdda-vp";
+	qphy->vregs[1].supply = "vdda-vph";
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(qphy->vregs), qphy->vregs);
+	if (ret < 0)
+		return ret;
+
+	qphy->pipe_clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(qphy->pipe_clk)) {
+		dev_err(dev, "failed to acquire pipe clock\n");
+		return PTR_ERR(qphy->pipe_clk);
+	}
+
+	qphy->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
+	if (IS_ERR(qphy->phy_reset)) {
+		dev_err(dev, "failed to acquire phy reset\n");
+		return PTR_ERR(qphy->phy_reset);
+	}
+
+	qphy->pipe_reset = devm_reset_control_get_exclusive(dev, "pipe");
+	if (IS_ERR(qphy->pipe_reset)) {
+		dev_err(dev, "failed to acquire pipe reset\n");
+		return PTR_ERR(qphy->pipe_reset);
+	}
+
+	phy = devm_phy_create(dev, dev->of_node, &qcom_pcie2_ops);
+	if (IS_ERR(phy)) {
+		dev_err(dev, "failed to create phy\n");
+		return PTR_ERR(phy);
+	}
+
+	phy_set_drvdata(phy, qphy);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider))
+		dev_err(dev, "failed to register phy provider\n");
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id qcom_pcie2_phy_match_table[] = {
+	{ .compatible = "qcom,pcie2-phy" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, qcom_pcie2_phy_match_table);
+
+static struct platform_driver qcom_pcie2_phy_driver = {
+	.probe = qcom_pcie2_phy_probe,
+	.driver = {
+		.name = "phy-qcom-pcie2",
+		.of_match_table = qcom_pcie2_phy_match_table,
+	},
+};
+
+module_platform_driver(qcom_pcie2_phy_driver);
+
+MODULE_DESCRIPTION("Qualcomm PCIe PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index cd91b4179b10..34ff6434da8f 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -1074,6 +1074,7 @@ static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
 
 	.start_ctrl		= PCS_START | PLL_READY_GATE_EN,
 	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
+	.mask_pcs_ready		= PHYSTATUS,
 	.mask_com_pcs_ready	= PCS_READY,
 
 	.has_phy_com_ctrl	= true,
@@ -1253,7 +1254,7 @@ static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
 
 	.start_ctrl             = SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
-	.mask_com_pcs_ready	= PCS_READY,
+	.mask_pcs_ready		= PHYSTATUS,
 };
 
 static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
@@ -1547,7 +1548,7 @@ static int qcom_qmp_phy_enable(struct phy *phy)
 	status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
 	mask = cfg->mask_pcs_ready;
 
-	ret = readl_poll_timeout(status, val, !(val & mask), 1,
+	ret = readl_poll_timeout(status, val, val & mask, 10,
 				 PHY_INIT_COMPLETE_TIMEOUT);
 	if (ret) {
 		dev_err(qmp->dev, "phy initialization timed-out\n");
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index 1322185a00a2..8ffba67568ec 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -13,6 +13,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
@@ -106,6 +107,7 @@ struct rcar_gen3_chan {
 	struct rcar_gen3_phy rphys[NUM_OF_PHYS];
 	struct regulator *vbus;
 	struct work_struct work;
+	struct mutex lock;	/* protects rphys[...].powered */
 	enum usb_dr_mode dr_mode;
 	bool extcon_host;
 	bool is_otg_channel;
@@ -437,15 +439,16 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p)
 	struct rcar_gen3_chan *channel = rphy->ch;
 	void __iomem *usb2_base = channel->base;
 	u32 val;
-	int ret;
+	int ret = 0;
 
+	mutex_lock(&channel->lock);
 	if (!rcar_gen3_are_all_rphys_power_off(channel))
-		return 0;
+		goto out;
 
 	if (channel->vbus) {
 		ret = regulator_enable(channel->vbus);
 		if (ret)
-			return ret;
+			goto out;
 	}
 
 	val = readl(usb2_base + USB2_USBCTR);
@@ -454,7 +457,10 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p)
 	val &= ~USB2_USBCTR_PLL_RST;
 	writel(val, usb2_base + USB2_USBCTR);
 
+out:
+	/* The powered flag should be set for any other phys anyway */
 	rphy->powered = true;
+	mutex_unlock(&channel->lock);
 
 	return 0;
 }
@@ -465,14 +471,18 @@ static int rcar_gen3_phy_usb2_power_off(struct phy *p)
 	struct rcar_gen3_chan *channel = rphy->ch;
 	int ret = 0;
 
+	mutex_lock(&channel->lock);
 	rphy->powered = false;
 
 	if (!rcar_gen3_are_all_rphys_power_off(channel))
-		return 0;
+		goto out;
 
 	if (channel->vbus)
 		ret = regulator_disable(channel->vbus);
 
+out:
+	mutex_unlock(&channel->lock);
+
 	return ret;
 }
 
@@ -639,6 +649,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 	if (!phy_usb2_ops)
 		return -EINVAL;
 
+	mutex_init(&channel->lock);
 	for (i = 0; i < NUM_OF_PHYS; i++) {
 		channel->rphys[i].phy = devm_phy_create(dev, NULL,
 							phy_usb2_ops);
diff --git a/drivers/phy/samsung/phy-samsung-usb2.c b/drivers/phy/samsung/phy-samsung-usb2.c
index e51d45eeda60..6c82f4fbe8a2 100644
--- a/drivers/phy/samsung/phy-samsung-usb2.c
+++ b/drivers/phy/samsung/phy-samsung-usb2.c
@@ -156,9 +156,8 @@ static int samsung_usb2_phy_probe(struct platform_device *pdev)
 	if (!cfg)
 		return -EINVAL;
 
-	drv = devm_kzalloc(dev, sizeof(struct samsung_usb2_phy_driver) +
-		cfg->num_phys * sizeof(struct samsung_usb2_phy_instance),
-								GFP_KERNEL);
+	drv = devm_kzalloc(dev, struct_size(drv, instances, cfg->num_phys),
+			   GFP_KERNEL);
 	if (!drv)
 		return -ENOMEM;
 
diff --git a/drivers/phy/ti/phy-am654-serdes.c b/drivers/phy/ti/phy-am654-serdes.c
index d3769200cb9b..f8edd0840fa2 100644
--- a/drivers/phy/ti/phy-am654-serdes.c
+++ b/drivers/phy/ti/phy-am654-serdes.c
@@ -247,8 +247,8 @@ static void serdes_am654_release(struct phy *x)
 	mux_control_deselect(phy->control);
 }
 
-struct phy *serdes_am654_xlate(struct device *dev, struct of_phandle_args
-				 *args)
+static struct phy *serdes_am654_xlate(struct device *dev,
+				      struct of_phandle_args *args)
 {
 	struct serdes_am654 *am654_phy;
 	struct phy *phy;