Merge tag 'qcom-drivers-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/late

Qualcomm ARM Based Driver Updates for v4.18

* Various SMEM updates/fixes
* Add qcom_smem_virt_to_phys SMEM API
* Update MAINTAINERS to include qcom_scm pattern
* Add Qualcomm Command DB driver
* Add Qualcomm SCM compatible for IPQ4019
* Add MSM8998 to smd-rpm compatible list
* Add Qualcomm GENI based QUP wrapper
* Fix Qualcomm QMI buffer sizing bug

* tag 'qcom-drivers-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  soc: qcom: smem: introduce qcom_smem_virt_to_phys()
  soc: qcom: qmi: fix a buffer sizing bug
  MAINTAINERS: Update pattern for qcom_scm
  soc: Unconditionally include qcom Makefile
  soc: qcom: smem: check sooner in qcom_smem_set_global_partition()
  soc: qcom: smem: fix qcom_smem_set_global_partition()
  soc: qcom: smem: fix off-by-one error in qcom_smem_alloc_private()
  soc: qcom: smem: byte swap values properly
  soc: qcom: smem: return proper type for cached entry functions
  soc: qcom: smem: fix first cache entry calculation
  soc: qcom: cmd-db: Make endian-agnostic
  drivers: qcom: add command DB driver
  soc: qcom: Add GENI based QUP Wrapper driver
  soc: qcom: smd-rpm: Add msm8998 compatible
  firmware: qcom: scm: Add ipq4019 soc compatible

Signed-off-by: Olof Johansson <olof@lixom.net>

16 files changed, 1625 insertions, 27 deletions

diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
index 7b40054be0d8..fcf6979c0b6d 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
@@ -11,9 +11,10 @@ Required properties:
  * "qcom,scm-msm8660" for MSM8660 platforms
  * "qcom,scm-msm8690" for MSM8690 platforms
  * "qcom,scm-msm8996" for MSM8996 platforms
+ * "qcom,scm-ipq4019" for IPQ4019 platforms
  * "qcom,scm" for later processors (MSM8916, APQ8084, MSM8974, etc)
 - clocks: One to three clocks may be required based on compatible.
- * No clock required for "qcom,scm-msm8996"
+ * No clock required for "qcom,scm-msm8996", "qcom,scm-ipq4019"
  * Only core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660", and "qcom,scm-msm8960"
  * Core, iface, and bus clocks required for "qcom,scm"
 - clock-names: Must contain "core" for the core clock, "iface" for the interface
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt
index a48049ccf6d0..89e1cb9212f6 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt
@@ -22,6 +22,7 @@ resources.
 		    "qcom,rpm-apq8084"
 		    "qcom,rpm-msm8916"
 		    "qcom,rpm-msm8974"
+		    "qcom,rpm-msm8998"
 
 - qcom,smd-channels:
 	Usage: required
diff --git a/MAINTAINERS b/MAINTAINERS
index 58b9861ccf99..218476dd7fde 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1817,7 +1817,7 @@ F:	drivers/spi/spi-qup.c
 F:	drivers/tty/serial/msm_serial.c
 F:	drivers/*/pm8???-*
 F:	drivers/mfd/ssbi.c
-F:	drivers/firmware/qcom_scm.c
+F:	drivers/firmware/qcom_scm*
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux.git
 
 ARM/RADISYS ENP2611 MACHINE SUPPORT
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 5a7d693009ef..e778af766fae 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -603,6 +603,9 @@ static const struct of_device_id qcom_scm_dt_match[] = {
 	{ .compatible = "qcom,scm-msm8996",
 	  .data = NULL, /* no clocks */
 	},
+	{ .compatible = "qcom,scm-ipq4019",
+	  .data = NULL, /* no clocks */
+	},
 	{ .compatible = "qcom,scm",
 	  .data = (void *)(SCM_HAS_CORE_CLK
 			   | SCM_HAS_IFACE_CLK
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index c00d81dfac0b..26fb43847f4b 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -494,6 +494,7 @@ EXPORT_SYMBOL_GPL(of_platform_default_populate);
 #ifndef CONFIG_PPC
 static const struct of_device_id reserved_mem_matches[] = {
 	{ .compatible = "qcom,rmtfs-mem" },
+	{ .compatible = "qcom,cmd-db" },
 	{ .compatible = "ramoops" },
 	{}
 };
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index 40523577bdaa..113e884697fd 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -14,7 +14,7 @@ obj-$(CONFIG_ARCH_MXC)		+= imx/
 obj-$(CONFIG_SOC_XWAY)		+= lantiq/
 obj-y				+= mediatek/
 obj-$(CONFIG_ARCH_MESON)	+= amlogic/
-obj-$(CONFIG_ARCH_QCOM)		+= qcom/
+obj-y				+= qcom/
 obj-y				+= renesas/
 obj-$(CONFIG_ARCH_ROCKCHIP)	+= rockchip/
 obj-$(CONFIG_SOC_SAMSUNG)	+= samsung/
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 5c4535b545cc..7093fe79934b 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -3,6 +3,24 @@
 #
 menu "Qualcomm SoC drivers"
 
+config QCOM_COMMAND_DB
+	bool "Qualcomm Command DB"
+	depends on (ARCH_QCOM && OF) || COMPILE_TEST
+	help
+	  Command DB queries shared memory by key string for shared system
+	  resources. Platform drivers that require to set state of a shared
+	  resource on a RPM-hardened platform must use this database to get
+	  SoC specific identifier and information for the shared resources.
+
+config QCOM_GENI_SE
+	tristate "QCOM GENI Serial Engine Driver"
+	depends on ARCH_QCOM || COMPILE_TEST
+	help
+	  This driver is used to manage Generic Interface (GENI) firmware based
+	  Qualcomm Technologies, Inc. Universal Peripheral (QUP) Wrapper. This
+	  driver is also used to manage the common aspects of multiple Serial
+	  Engines present in the QUP.
+
 config QCOM_GLINK_SSR
 	tristate "Qualcomm Glink SSR driver"
 	depends on RPMSG
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index dcebf2814e6d..cbf414cfe6aa 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -1,4 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_QCOM_GENI_SE) +=	qcom-geni-se.o
+obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o
 obj-$(CONFIG_QCOM_GLINK_SSR) +=	glink_ssr.o
 obj-$(CONFIG_QCOM_GSBI)	+=	qcom_gsbi.o
 obj-$(CONFIG_QCOM_MDT_LOADER)	+= mdt_loader.o
diff --git a/drivers/soc/qcom/cmd-db.c b/drivers/soc/qcom/cmd-db.c
new file mode 100644
index 000000000000..a6f646295f06
--- /dev/null
+++ b/drivers/soc/qcom/cmd-db.c
@@ -0,0 +1,317 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2016-2018, The Linux Foundation. All rights reserved. */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <soc/qcom/cmd-db.h>
+
+#define NUM_PRIORITY		2
+#define MAX_SLV_ID		8
+#define SLAVE_ID_MASK		0x7
+#define SLAVE_ID_SHIFT		16
+
+/**
+ * struct entry_header: header for each entry in cmddb
+ *
+ * @id: resource's identifier
+ * @priority: unused
+ * @addr: the address of the resource
+ * @len: length of the data
+ * @offset: offset from :@data_offset, start of the data
+ */
+struct entry_header {
+	u8 id[8];
+	__le32 priority[NUM_PRIORITY];
+	__le32 addr;
+	__le16 len;
+	__le16 offset;
+};
+
+/**
+ * struct rsc_hdr: resource header information
+ *
+ * @slv_id: id for the resource
+ * @header_offset: entry's header at offset from the end of the cmd_db_header
+ * @data_offset: entry's data at offset from the end of the cmd_db_header
+ * @cnt: number of entries for HW type
+ * @version: MSB is major, LSB is minor
+ * @reserved: reserved for future use.
+ */
+struct rsc_hdr {
+	__le16 slv_id;
+	__le16 header_offset;
+	__le16 data_offset;
+	__le16 cnt;
+	__le16 version;
+	__le16 reserved[3];
+};
+
+/**
+ * struct cmd_db_header: The DB header information
+ *
+ * @version: The cmd db version
+ * @magic: constant expected in the database
+ * @header: array of resources
+ * @checksum: checksum for the header. Unused.
+ * @reserved: reserved memory
+ * @data: driver specific data
+ */
+struct cmd_db_header {
+	__le32 version;
+	u8 magic[4];
+	struct rsc_hdr header[MAX_SLV_ID];
+	__le32 checksum;
+	__le32 reserved;
+	u8 data[];
+};
+
+/**
+ * DOC: Description of the Command DB database.
+ *
+ * At the start of the command DB memory is the cmd_db_header structure.
+ * The cmd_db_header holds the version, checksum, magic key as well as an
+ * array for header for each slave (depicted by the rsc_header). Each h/w
+ * based accelerator is a 'slave' (shared resource) and has slave id indicating
+ * the type of accelerator. The rsc_header is the header for such individual
+ * slaves of a given type. The entries for each of these slaves begin at the
+ * rsc_hdr.header_offset. In addition each slave could have auxiliary data
+ * that may be needed by the driver. The data for the slave starts at the
+ * entry_header.offset to the location pointed to by the rsc_hdr.data_offset.
+ *
+ * Drivers have a stringified key to a slave/resource. They can query the slave
+ * information and get the slave id and the auxiliary data and the length of the
+ * data. Using this information, they can format the request to be sent to the
+ * h/w accelerator and request a resource state.
+ */
+
+static const u8 CMD_DB_MAGIC[] = { 0xdb, 0x30, 0x03, 0x0c };
+
+static bool cmd_db_magic_matches(const struct cmd_db_header *header)
+{
+	const u8 *magic = header->magic;
+
+	return memcmp(magic, CMD_DB_MAGIC, ARRAY_SIZE(CMD_DB_MAGIC)) == 0;
+}
+
+static struct cmd_db_header *cmd_db_header;
+
+
+static inline void *rsc_to_entry_header(struct rsc_hdr *hdr)
+{
+	u16 offset = le16_to_cpu(hdr->header_offset);
+
+	return cmd_db_header->data + offset;
+}
+
+static inline void *
+rsc_offset(struct rsc_hdr *hdr, struct entry_header *ent)
+{
+	u16 offset = le16_to_cpu(hdr->data_offset);
+	u16 loffset = le16_to_cpu(ent->offset);
+
+	return cmd_db_header->data + offset + loffset;
+}
+
+/**
+ * cmd_db_ready - Indicates if command DB is available
+ *
+ * Return: 0 on success, errno otherwise
+ */
+int cmd_db_ready(void)
+{
+	if (cmd_db_header == NULL)
+		return -EPROBE_DEFER;
+	else if (!cmd_db_magic_matches(cmd_db_header))
+		return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL(cmd_db_ready);
+
+static int cmd_db_get_header(const char *id, struct entry_header *eh,
+			     struct rsc_hdr *rh)
+{
+	struct rsc_hdr *rsc_hdr;
+	struct entry_header *ent;
+	int ret, i, j;
+	u8 query[8];
+
+	ret = cmd_db_ready();
+	if (ret)
+		return ret;
+
+	if (!eh || !rh)
+		return -EINVAL;
+
+	/* Pad out query string to same length as in DB */
+	strncpy(query, id, sizeof(query));
+
+	for (i = 0; i < MAX_SLV_ID; i++) {
+		rsc_hdr = &cmd_db_header->header[i];
+		if (!rsc_hdr->slv_id)
+			break;
+
+		ent = rsc_to_entry_header(rsc_hdr);
+		for (j = 0; j < le16_to_cpu(rsc_hdr->cnt); j++, ent++) {
+			if (memcmp(ent->id, query, sizeof(ent->id)) == 0)
+				break;
+		}
+
+		if (j < le16_to_cpu(rsc_hdr->cnt)) {
+			memcpy(eh, ent, sizeof(*ent));
+			memcpy(rh, rsc_hdr, sizeof(*rh));
+			return 0;
+		}
+	}
+
+	return -ENODEV;
+}
+
+/**
+ * cmd_db_read_addr() - Query command db for resource id address.
+ *
+ * @id: resource id to query for address
+ *
+ * Return: resource address on success, 0 on error
+ *
+ * This is used to retrieve resource address based on resource
+ * id.
+ */
+u32 cmd_db_read_addr(const char *id)
+{
+	int ret;
+	struct entry_header ent;
+	struct rsc_hdr rsc_hdr;
+
+	ret = cmd_db_get_header(id, &ent, &rsc_hdr);
+
+	return ret < 0 ? 0 : le32_to_cpu(ent.addr);
+}
+EXPORT_SYMBOL(cmd_db_read_addr);
+
+/**
+ * cmd_db_read_aux_data() - Query command db for aux data.
+ *
+ *  @id: Resource to retrieve AUX Data on.
+ *  @data: Data buffer to copy returned aux data to. Returns size on NULL
+ *  @len: Caller provides size of data buffer passed in.
+ *
+ *  Return: size of data on success, errno otherwise
+ */
+int cmd_db_read_aux_data(const char *id, u8 *data, size_t len)
+{
+	int ret;
+	struct entry_header ent;
+	struct rsc_hdr rsc_hdr;
+	u16 ent_len;
+
+	if (!data)
+		return -EINVAL;
+
+	ret = cmd_db_get_header(id, &ent, &rsc_hdr);
+	if (ret)
+		return ret;
+
+	ent_len = le16_to_cpu(ent.len);
+	if (len < ent_len)
+		return -EINVAL;
+
+	len = min_t(u16, ent_len, len);
+	memcpy(data, rsc_offset(&rsc_hdr, &ent), len);
+
+	return len;
+}
+EXPORT_SYMBOL(cmd_db_read_aux_data);
+
+/**
+ * cmd_db_read_aux_data_len - Get the length of the auxiliary data stored in DB.
+ *
+ * @id: Resource to retrieve AUX Data.
+ *
+ * Return: size on success, 0 on error
+ */
+size_t cmd_db_read_aux_data_len(const char *id)
+{
+	int ret;
+	struct entry_header ent;
+	struct rsc_hdr rsc_hdr;
+
+	ret = cmd_db_get_header(id, &ent, &rsc_hdr);
+
+	return ret < 0 ? 0 : le16_to_cpu(ent.len);
+}
+EXPORT_SYMBOL(cmd_db_read_aux_data_len);
+
+/**
+ * cmd_db_read_slave_id - Get the slave ID for a given resource address
+ *
+ * @id: Resource id to query the DB for version
+ *
+ * Return: cmd_db_hw_type enum on success, CMD_DB_HW_INVALID on error
+ */
+enum cmd_db_hw_type cmd_db_read_slave_id(const char *id)
+{
+	int ret;
+	struct entry_header ent;
+	struct rsc_hdr rsc_hdr;
+	u32 addr;
+
+	ret = cmd_db_get_header(id, &ent, &rsc_hdr);
+	if (ret < 0)
+		return CMD_DB_HW_INVALID;
+
+	addr = le32_to_cpu(ent.addr);
+	return (addr >> SLAVE_ID_SHIFT) & SLAVE_ID_MASK;
+}
+EXPORT_SYMBOL(cmd_db_read_slave_id);
+
+static int cmd_db_dev_probe(struct platform_device *pdev)
+{
+	struct reserved_mem *rmem;
+	int ret = 0;
+
+	rmem = of_reserved_mem_lookup(pdev->dev.of_node);
+	if (!rmem) {
+		dev_err(&pdev->dev, "failed to acquire memory region\n");
+		return -EINVAL;
+	}
+
+	cmd_db_header = memremap(rmem->base, rmem->size, MEMREMAP_WB);
+	if (IS_ERR_OR_NULL(cmd_db_header)) {
+		ret = PTR_ERR(cmd_db_header);
+		cmd_db_header = NULL;
+		return ret;
+	}
+
+	if (!cmd_db_magic_matches(cmd_db_header)) {
+		dev_err(&pdev->dev, "Invalid Command DB Magic\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id cmd_db_match_table[] = {
+	{ .compatible = "qcom,cmd-db" },
+	{ },
+};
+
+static struct platform_driver cmd_db_dev_driver = {
+	.probe  = cmd_db_dev_probe,
+	.driver = {
+		   .name = "cmd-db",
+		   .of_match_table = cmd_db_match_table,
+	},
+};
+
+static int __init cmd_db_device_init(void)
+{
+	return platform_driver_register(&cmd_db_dev_driver);
+}
+arch_initcall(cmd_db_device_init);
diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
new file mode 100644
index 000000000000..feed3db21c10
--- /dev/null
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -0,0 +1,748 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
+
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/qcom-geni-se.h>
+
+/**
+ * DOC: Overview
+ *
+ * Generic Interface (GENI) Serial Engine (SE) Wrapper driver is introduced
+ * to manage GENI firmware based Qualcomm Universal Peripheral (QUP) Wrapper
+ * controller. QUP Wrapper is designed to support various serial bus protocols
+ * like UART, SPI, I2C, I3C, etc.
+ */
+
+/**
+ * DOC: Hardware description
+ *
+ * GENI based QUP is a highly-flexible and programmable module for supporting
+ * a wide range of serial interfaces like UART, SPI, I2C, I3C, etc. A single
+ * QUP module can provide upto 8 serial interfaces, using its internal
+ * serial engines. The actual configuration is determined by the target
+ * platform configuration. The protocol supported by each interface is
+ * determined by the firmware loaded to the serial engine. Each SE consists
+ * of a DMA Engine and GENI sub modules which enable serial engines to
+ * support FIFO and DMA modes of operation.
+ *
+ *
+ *                      +-----------------------------------------+
+ *                      |QUP Wrapper                              |
+ *                      |         +----------------------------+  |
+ *   --QUP & SE Clocks-->         | Serial Engine N            |  +-IO------>
+ *                      |         | ...                        |  | Interface
+ *   <---Clock Perf.----+    +----+-----------------------+    |  |
+ *     State Interface  |    | Serial Engine 1            |    |  |
+ *                      |    |                            |    |  |
+ *                      |    |                            |    |  |
+ *   <--------AHB------->    |                            |    |  |
+ *                      |    |                            +----+  |
+ *                      |    |                            |       |
+ *                      |    |                            |       |
+ *   <------SE IRQ------+    +----------------------------+       |
+ *                      |                                         |
+ *                      +-----------------------------------------+
+ *
+ *                         Figure 1: GENI based QUP Wrapper
+ *
+ * The GENI submodules include primary and secondary sequencers which are
+ * used to drive TX & RX operations. On serial interfaces that operate using
+ * master-slave model, primary sequencer drives both TX & RX operations. On
+ * serial interfaces that operate using peer-to-peer model, primary sequencer
+ * drives TX operation and secondary sequencer drives RX operation.
+ */
+
+/**
+ * DOC: Software description
+ *
+ * GENI SE Wrapper driver is structured into 2 parts:
+ *
+ * geni_wrapper represents QUP Wrapper controller. This part of the driver
+ * manages QUP Wrapper information such as hardware version, clock
+ * performance table that is common to all the internal serial engines.
+ *
+ * geni_se represents serial engine. This part of the driver manages serial
+ * engine information such as clocks, containing QUP Wrapper, etc. This part
+ * of driver also supports operations (eg. initialize the concerned serial
+ * engine, select between FIFO and DMA mode of operation etc.) that are
+ * common to all the serial engines and are independent of serial interfaces.
+ */
+
+#define MAX_CLK_PERF_LEVEL 32
+#define NUM_AHB_CLKS 2
+
+/**
+ * @struct geni_wrapper - Data structure to represent the QUP Wrapper Core
+ * @dev:		Device pointer of the QUP wrapper core
+ * @base:		Base address of this instance of QUP wrapper core
+ * @ahb_clks:		Handle to the primary & secondary AHB clocks
+ */
+struct geni_wrapper {
+	struct device *dev;
+	void __iomem *base;
+	struct clk_bulk_data ahb_clks[NUM_AHB_CLKS];
+};
+
+#define QUP_HW_VER_REG			0x4
+
+/* Common SE registers */
+#define GENI_INIT_CFG_REVISION		0x0
+#define GENI_S_INIT_CFG_REVISION	0x4
+#define GENI_OUTPUT_CTRL		0x24
+#define GENI_CGC_CTRL			0x28
+#define GENI_CLK_CTRL_RO		0x60
+#define GENI_IF_DISABLE_RO		0x64
+#define GENI_FW_S_REVISION_RO		0x6c
+#define SE_GENI_BYTE_GRAN		0x254
+#define SE_GENI_TX_PACKING_CFG0		0x260
+#define SE_GENI_TX_PACKING_CFG1		0x264
+#define SE_GENI_RX_PACKING_CFG0		0x284
+#define SE_GENI_RX_PACKING_CFG1		0x288
+#define SE_GENI_M_GP_LENGTH		0x910
+#define SE_GENI_S_GP_LENGTH		0x914
+#define SE_DMA_TX_PTR_L			0xc30
+#define SE_DMA_TX_PTR_H			0xc34
+#define SE_DMA_TX_ATTR			0xc38
+#define SE_DMA_TX_LEN			0xc3c
+#define SE_DMA_TX_IRQ_EN		0xc48
+#define SE_DMA_TX_IRQ_EN_SET		0xc4c
+#define SE_DMA_TX_IRQ_EN_CLR		0xc50
+#define SE_DMA_TX_LEN_IN		0xc54
+#define SE_DMA_TX_MAX_BURST		0xc5c
+#define SE_DMA_RX_PTR_L			0xd30
+#define SE_DMA_RX_PTR_H			0xd34
+#define SE_DMA_RX_ATTR			0xd38
+#define SE_DMA_RX_LEN			0xd3c
+#define SE_DMA_RX_IRQ_EN		0xd48
+#define SE_DMA_RX_IRQ_EN_SET		0xd4c
+#define SE_DMA_RX_IRQ_EN_CLR		0xd50
+#define SE_DMA_RX_LEN_IN		0xd54
+#define SE_DMA_RX_MAX_BURST		0xd5c
+#define SE_DMA_RX_FLUSH			0xd60
+#define SE_GSI_EVENT_EN			0xe18
+#define SE_IRQ_EN			0xe1c
+#define SE_DMA_GENERAL_CFG		0xe30
+
+/* GENI_OUTPUT_CTRL fields */
+#define DEFAULT_IO_OUTPUT_CTRL_MSK	GENMASK(6, 0)
+
+/* GENI_CGC_CTRL fields */
+#define CFG_AHB_CLK_CGC_ON		BIT(0)
+#define CFG_AHB_WR_ACLK_CGC_ON		BIT(1)
+#define DATA_AHB_CLK_CGC_ON		BIT(2)
+#define SCLK_CGC_ON			BIT(3)
+#define TX_CLK_CGC_ON			BIT(4)
+#define RX_CLK_CGC_ON			BIT(5)
+#define EXT_CLK_CGC_ON			BIT(6)
+#define PROG_RAM_HCLK_OFF		BIT(8)
+#define PROG_RAM_SCLK_OFF		BIT(9)
+#define DEFAULT_CGC_EN			GENMASK(6, 0)
+
+/* SE_GSI_EVENT_EN fields */
+#define DMA_RX_EVENT_EN			BIT(0)
+#define DMA_TX_EVENT_EN			BIT(1)
+#define GENI_M_EVENT_EN			BIT(2)
+#define GENI_S_EVENT_EN			BIT(3)
+
+/* SE_IRQ_EN fields */
+#define DMA_RX_IRQ_EN			BIT(0)
+#define DMA_TX_IRQ_EN			BIT(1)
+#define GENI_M_IRQ_EN			BIT(2)
+#define GENI_S_IRQ_EN			BIT(3)
+
+/* SE_DMA_GENERAL_CFG */
+#define DMA_RX_CLK_CGC_ON		BIT(0)
+#define DMA_TX_CLK_CGC_ON		BIT(1)
+#define DMA_AHB_SLV_CFG_ON		BIT(2)
+#define AHB_SEC_SLV_CLK_CGC_ON		BIT(3)
+#define DUMMY_RX_NON_BUFFERABLE		BIT(4)
+#define RX_DMA_ZERO_PADDING_EN		BIT(5)
+#define RX_DMA_IRQ_DELAY_MSK		GENMASK(8, 6)
+#define RX_DMA_IRQ_DELAY_SHFT		6
+
+/**
+ * geni_se_get_qup_hw_version() - Read the QUP wrapper Hardware version
+ * @se:	Pointer to the corresponding serial engine.
+ *
+ * Return: Hardware Version of the wrapper.
+ */
+u32 geni_se_get_qup_hw_version(struct geni_se *se)
+{
+	struct geni_wrapper *wrapper = se->wrapper;
+
+	return readl_relaxed(wrapper->base + QUP_HW_VER_REG);
+}
+EXPORT_SYMBOL(geni_se_get_qup_hw_version);
+
+static void geni_se_io_set_mode(void __iomem *base)
+{
+	u32 val;
+
+	val = readl_relaxed(base + SE_IRQ_EN);
+	val |= GENI_M_IRQ_EN | GENI_S_IRQ_EN;
+	val |= DMA_TX_IRQ_EN | DMA_RX_IRQ_EN;
+	writel_relaxed(val, base + SE_IRQ_EN);
+
+	val = readl_relaxed(base + SE_GENI_DMA_MODE_EN);
+	val &= ~GENI_DMA_MODE_EN;
+	writel_relaxed(val, base + SE_GENI_DMA_MODE_EN);
+
+	writel_relaxed(0, base + SE_GSI_EVENT_EN);
+}
+
+static void geni_se_io_init(void __iomem *base)
+{
+	u32 val;
+
+	val = readl_relaxed(base + GENI_CGC_CTRL);
+	val |= DEFAULT_CGC_EN;
+	writel_relaxed(val, base + GENI_CGC_CTRL);
+
+	val = readl_relaxed(base + SE_DMA_GENERAL_CFG);
+	val |= AHB_SEC_SLV_CLK_CGC_ON | DMA_AHB_SLV_CFG_ON;
+	val |= DMA_TX_CLK_CGC_ON | DMA_RX_CLK_CGC_ON;
+	writel_relaxed(val, base + SE_DMA_GENERAL_CFG);
+
+	writel_relaxed(DEFAULT_IO_OUTPUT_CTRL_MSK, base + GENI_OUTPUT_CTRL);
+	writel_relaxed(FORCE_DEFAULT, base + GENI_FORCE_DEFAULT_REG);
+}
+
+/**
+ * geni_se_init() - Initialize the GENI serial engine
+ * @se:		Pointer to the concerned serial engine.
+ * @rx_wm:	Receive watermark, in units of FIFO words.
+ * @rx_rfr_wm:	Ready-for-receive watermark, in units of FIFO words.
+ *
+ * This function is used to initialize the GENI serial engine, configure
+ * receive watermark and ready-for-receive watermarks.
+ */
+void geni_se_init(struct geni_se *se, u32 rx_wm, u32 rx_rfr)
+{
+	u32 val;
+
+	geni_se_io_init(se->base);
+	geni_se_io_set_mode(se->base);
+
+	writel_relaxed(rx_wm, se->base + SE_GENI_RX_WATERMARK_REG);
+	writel_relaxed(rx_rfr, se->base + SE_GENI_RX_RFR_WATERMARK_REG);
+
+	val = readl_relaxed(se->base + SE_GENI_M_IRQ_EN);
+	val |= M_COMMON_GENI_M_IRQ_EN;
+	writel_relaxed(val, se->base + SE_GENI_M_IRQ_EN);
+
+	val = readl_relaxed(se->base + SE_GENI_S_IRQ_EN);
+	val |= S_COMMON_GENI_S_IRQ_EN;
+	writel_relaxed(val, se->base + SE_GENI_S_IRQ_EN);
+}
+EXPORT_SYMBOL(geni_se_init);
+
+static void geni_se_select_fifo_mode(struct geni_se *se)
+{
+	u32 proto = geni_se_read_proto(se);
+	u32 val;
+
+	writel_relaxed(0, se->base + SE_GSI_EVENT_EN);
+	writel_relaxed(0xffffffff, se->base + SE_GENI_M_IRQ_CLEAR);
+	writel_relaxed(0xffffffff, se->base + SE_GENI_S_IRQ_CLEAR);
+	writel_relaxed(0xffffffff, se->base + SE_DMA_TX_IRQ_CLR);
+	writel_relaxed(0xffffffff, se->base + SE_DMA_RX_IRQ_CLR);
+	writel_relaxed(0xffffffff, se->base + SE_IRQ_EN);
+
+	val = readl_relaxed(se->base + SE_GENI_M_IRQ_EN);
+	if (proto != GENI_SE_UART) {
+		val |= M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN;
+		val |= M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN;
+	}
+	writel_relaxed(val, se->base + SE_GENI_M_IRQ_EN);
+
+	val = readl_relaxed(se->base + SE_GENI_S_IRQ_EN);
+	if (proto != GENI_SE_UART)
+		val |= S_CMD_DONE_EN;
+	writel_relaxed(val, se->base + SE_GENI_S_IRQ_EN);
+
+	val = readl_relaxed(se->base + SE_GENI_DMA_MODE_EN);
+	val &= ~GENI_DMA_MODE_EN;
+	writel_relaxed(val, se->base + SE_GENI_DMA_MODE_EN);
+}
+
+static void geni_se_select_dma_mode(struct geni_se *se)
+{
+	u32 val;
+
+	writel_relaxed(0, se->base + SE_GSI_EVENT_EN);
+	writel_relaxed(0xffffffff, se->base + SE_GENI_M_IRQ_CLEAR);
+	writel_relaxed(0xffffffff, se->base + SE_GENI_S_IRQ_CLEAR);
+	writel_relaxed(0xffffffff, se->base + SE_DMA_TX_IRQ_CLR);
+	writel_relaxed(0xffffffff, se->base + SE_DMA_RX_IRQ_CLR);
+	writel_relaxed(0xffffffff, se->base + SE_IRQ_EN);
+
+	val = readl_relaxed(se->base + SE_GENI_DMA_MODE_EN);
+	val |= GENI_DMA_MODE_EN;
+	writel_relaxed(val, se->base + SE_GENI_DMA_MODE_EN);
+}
+
+/**
+ * geni_se_select_mode() - Select the serial engine transfer mode
+ * @se:		Pointer to the concerned serial engine.
+ * @mode:	Transfer mode to be selected.
+ */
+void geni_se_select_mode(struct geni_se *se, enum geni_se_xfer_mode mode)
+{
+	WARN_ON(mode != GENI_SE_FIFO && mode != GENI_SE_DMA);
+
+	switch (mode) {
+	case GENI_SE_FIFO:
+		geni_se_select_fifo_mode(se);
+		break;
+	case GENI_SE_DMA:
+		geni_se_select_dma_mode(se);
+		break;
+	case GENI_SE_INVALID:
+	default:
+		break;
+	}
+}
+EXPORT_SYMBOL(geni_se_select_mode);
+
+/**
+ * DOC: Overview
+ *
+ * GENI FIFO packing is highly configurable. TX/RX packing/unpacking consist
+ * of up to 4 operations, each operation represented by 4 configuration vectors
+ * of 10 bits programmed in GENI_TX_PACKING_CFG0 and GENI_TX_PACKING_CFG1 for
+ * TX FIFO and in GENI_RX_PACKING_CFG0 and GENI_RX_PACKING_CFG1 for RX FIFO.
+ * Refer to below examples for detailed bit-field description.
+ *
+ * Example 1: word_size = 7, packing_mode = 4 x 8, msb_to_lsb = 1
+ *
+ *        +-----------+-------+-------+-------+-------+
+ *        |           | vec_0 | vec_1 | vec_2 | vec_3 |
+ *        +-----------+-------+-------+-------+-------+
+ *        | start     | 0x6   | 0xe   | 0x16  | 0x1e  |
+ *        | direction | 1     | 1     | 1     | 1     |
+ *        | length    | 6     | 6     | 6     | 6     |
+ *        | stop      | 0     | 0     | 0     | 1     |
+ *        +-----------+-------+-------+-------+-------+
+ *
+ * Example 2: word_size = 15, packing_mode = 2 x 16, msb_to_lsb = 0
+ *
+ *        +-----------+-------+-------+-------+-------+
+ *        |           | vec_0 | vec_1 | vec_2 | vec_3 |
+ *        +-----------+-------+-------+-------+-------+
+ *        | start     | 0x0   | 0x8   | 0x10  | 0x18  |
+ *        | direction | 0     | 0     | 0     | 0     |
+ *        | length    | 7     | 6     | 7     | 6     |
+ *        | stop      | 0     | 0     | 0     | 1     |
+ *        +-----------+-------+-------+-------+-------+
+ *
+ * Example 3: word_size = 23, packing_mode = 1 x 32, msb_to_lsb = 1
+ *
+ *        +-----------+-------+-------+-------+-------+
+ *        |           | vec_0 | vec_1 | vec_2 | vec_3 |
+ *        +-----------+-------+-------+-------+-------+
+ *        | start     | 0x16  | 0xe   | 0x6   | 0x0   |
+ *        | direction | 1     | 1     | 1     | 1     |
+ *        | length    | 7     | 7     | 6     | 0     |
+ *        | stop      | 0     | 0     | 1     | 0     |
+ *        +-----------+-------+-------+-------+-------+
+ *
+ */
+
+#define NUM_PACKING_VECTORS 4
+#define PACKING_START_SHIFT 5
+#define PACKING_DIR_SHIFT 4
+#define PACKING_LEN_SHIFT 1
+#define PACKING_STOP_BIT BIT(0)
+#define PACKING_VECTOR_SHIFT 10
+/**
+ * geni_se_config_packing() - Packing configuration of the serial engine
+ * @se:		Pointer to the concerned serial engine
+ * @bpw:	Bits of data per transfer word.
+ * @pack_words:	Number of words per fifo element.
+ * @msb_to_lsb:	Transfer from MSB to LSB or vice-versa.
+ * @tx_cfg:	Flag to configure the TX Packing.
+ * @rx_cfg:	Flag to configure the RX Packing.
+ *
+ * This function is used to configure the packing rules for the current
+ * transfer.
+ */
+void geni_se_config_packing(struct geni_se *se, int bpw, int pack_words,
+			    bool msb_to_lsb, bool tx_cfg, bool rx_cfg)
+{
+	u32 cfg0, cfg1, cfg[NUM_PACKING_VECTORS] = {0};
+	int len;
+	int temp_bpw = bpw;
+	int idx_start = msb_to_lsb ? bpw - 1 : 0;
+	int idx = idx_start;
+	int idx_delta = msb_to_lsb ? -BITS_PER_BYTE : BITS_PER_BYTE;
+	int ceil_bpw = ALIGN(bpw, BITS_PER_BYTE);
+	int iter = (ceil_bpw * pack_words) / BITS_PER_BYTE;
+	int i;
+
+	if (iter <= 0 || iter > NUM_PACKING_VECTORS)
+		return;
+
+	for (i = 0; i < iter; i++) {
+		len = min_t(int, temp_bpw, BITS_PER_BYTE) - 1;
+		cfg[i] = idx << PACKING_START_SHIFT;
+		cfg[i] |= msb_to_lsb << PACKING_DIR_SHIFT;
+		cfg[i] |= len << PACKING_LEN_SHIFT;
+
+		if (temp_bpw <= BITS_PER_BYTE) {
+			idx = ((i + 1) * BITS_PER_BYTE) + idx_start;
+			temp_bpw = bpw;
+		} else {
+			idx = idx + idx_delta;
+			temp_bpw = temp_bpw - BITS_PER_BYTE;
+		}
+	}
+	cfg[iter - 1] |= PACKING_STOP_BIT;
+	cfg0 = cfg[0] | (cfg[1] << PACKING_VECTOR_SHIFT);
+	cfg1 = cfg[2] | (cfg[3] << PACKING_VECTOR_SHIFT);
+
+	if (tx_cfg) {
+		writel_relaxed(cfg0, se->base + SE_GENI_TX_PACKING_CFG0);
+		writel_relaxed(cfg1, se->base + SE_GENI_TX_PACKING_CFG1);
+	}
+	if (rx_cfg) {
+		writel_relaxed(cfg0, se->base + SE_GENI_RX_PACKING_CFG0);
+		writel_relaxed(cfg1, se->base + SE_GENI_RX_PACKING_CFG1);
+	}
+
+	/*
+	 * Number of protocol words in each FIFO entry
+	 * 0 - 4x8, four words in each entry, max word size of 8 bits
+	 * 1 - 2x16, two words in each entry, max word size of 16 bits
+	 * 2 - 1x32, one word in each entry, max word size of 32 bits
+	 * 3 - undefined
+	 */
+	if (pack_words || bpw == 32)
+		writel_relaxed(bpw / 16, se->base + SE_GENI_BYTE_GRAN);
+}
+EXPORT_SYMBOL(geni_se_config_packing);
+
+static void geni_se_clks_off(struct geni_se *se)
+{
+	struct geni_wrapper *wrapper = se->wrapper;
+
+	clk_disable_unprepare(se->clk);
+	clk_bulk_disable_unprepare(ARRAY_SIZE(wrapper->ahb_clks),
+						wrapper->ahb_clks);
+}
+
+/**
+ * geni_se_resources_off() - Turn off resources associated with the serial
+ *                           engine
+ * @se:	Pointer to the concerned serial engine.
+ *
+ * Return: 0 on success, standard Linux error codes on failure/error.
+ */
+int geni_se_resources_off(struct geni_se *se)
+{
+	int ret;
+
+	ret = pinctrl_pm_select_sleep_state(se->dev);
+	if (ret)
+		return ret;
+
+	geni_se_clks_off(se);
+	return 0;
+}
+EXPORT_SYMBOL(geni_se_resources_off);
+
+static int geni_se_clks_on(struct geni_se *se)
+{
+	int ret;
+	struct geni_wrapper *wrapper = se->wrapper;
+
+	ret = clk_bulk_prepare_enable(ARRAY_SIZE(wrapper->ahb_clks),
+						wrapper->ahb_clks);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(se->clk);
+	if (ret)
+		clk_bulk_disable_unprepare(ARRAY_SIZE(wrapper->ahb_clks),
+							wrapper->ahb_clks);
+	return ret;
+}
+
+/**
+ * geni_se_resources_on() - Turn on resources associated with the serial
+ *                          engine
+ * @se:	Pointer to the concerned serial engine.
+ *
+ * Return: 0 on success, standard Linux error codes on failure/error.
+ */
+int geni_se_resources_on(struct geni_se *se)
+{
+	int ret;
+
+	ret = geni_se_clks_on(se);
+	if (ret)
+		return ret;
+
+	ret = pinctrl_pm_select_default_state(se->dev);
+	if (ret)
+		geni_se_clks_off(se);
+
+	return ret;
+}
+EXPORT_SYMBOL(geni_se_resources_on);
+
+/**
+ * geni_se_clk_tbl_get() - Get the clock table to program DFS
+ * @se:		Pointer to the concerned serial engine.
+ * @tbl:	Table in which the output is returned.
+ *
+ * This function is called by the protocol drivers to determine the different
+ * clock frequencies supported by serial engine core clock. The protocol
+ * drivers use the output to determine the clock frequency index to be
+ * programmed into DFS.
+ *
+ * Return: number of valid performance levels in the table on success,
+ *	   standard Linux error codes on failure.
+ */
+int geni_se_clk_tbl_get(struct geni_se *se, unsigned long **tbl)
+{
+	unsigned long freq = 0;
+	int i;
+
+	if (se->clk_perf_tbl) {
+		*tbl = se->clk_perf_tbl;
+		return se->num_clk_levels;
+	}
+
+	se->clk_perf_tbl = devm_kcalloc(se->dev, MAX_CLK_PERF_LEVEL,
+					sizeof(*se->clk_perf_tbl),
+					GFP_KERNEL);
+	if (!se->clk_perf_tbl)
+		return -ENOMEM;
+
+	for (i = 0; i < MAX_CLK_PERF_LEVEL; i++) {
+		freq = clk_round_rate(se->clk, freq + 1);
+		if (!freq || freq == se->clk_perf_tbl[i - 1])
+			break;
+		se->clk_perf_tbl[i] = freq;
+	}
+	se->num_clk_levels = i;
+	*tbl = se->clk_perf_tbl;
+	return se->num_clk_levels;
+}
+EXPORT_SYMBOL(geni_se_clk_tbl_get);
+
+/**
+ * geni_se_clk_freq_match() - Get the matching or closest SE clock frequency
+ * @se:		Pointer to the concerned serial engine.
+ * @req_freq:	Requested clock frequency.
+ * @index:	Index of the resultant frequency in the table.
+ * @res_freq:	Resultant frequency which matches or is closer to the
+ *		requested frequency.
+ * @exact:	Flag to indicate exact multiple requirement of the requested
+ *		frequency.
+ *
+ * This function is called by the protocol drivers to determine the matching
+ * or exact multiple of the requested frequency, as provided by the serial
+ * engine clock in order to meet the performance requirements. If there is
+ * no matching or exact multiple of the requested frequency found, then it
+ * selects the closest floor frequency, if exact flag is not set.
+ *
+ * Return: 0 on success, standard Linux error codes on failure.
+ */
+int geni_se_clk_freq_match(struct geni_se *se, unsigned long req_freq,
+			   unsigned int *index, unsigned long *res_freq,
+			   bool exact)
+{
+	unsigned long *tbl;
+	int num_clk_levels;
+	int i;
+
+	num_clk_levels = geni_se_clk_tbl_get(se, &tbl);
+	if (num_clk_levels < 0)
+		return num_clk_levels;
+
+	if (num_clk_levels == 0)
+		return -EINVAL;
+
+	*res_freq = 0;
+	for (i = 0; i < num_clk_levels; i++) {
+		if (!(tbl[i] % req_freq)) {
+			*index = i;
+			*res_freq = tbl[i];
+			return 0;
+		}
+
+		if (!(*res_freq) || ((tbl[i] > *res_freq) &&
+				     (tbl[i] < req_freq))) {
+			*index = i;
+			*res_freq = tbl[i];
+		}
+	}
+
+	if (exact)
+		return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL(geni_se_clk_freq_match);
+
+#define GENI_SE_DMA_DONE_EN BIT(0)
+#define GENI_SE_DMA_EOT_EN BIT(1)
+#define GENI_SE_DMA_AHB_ERR_EN BIT(2)
+#define GENI_SE_DMA_EOT_BUF BIT(0)
+/**
+ * geni_se_tx_dma_prep() - Prepare the serial engine for TX DMA transfer
+ * @se:			Pointer to the concerned serial engine.
+ * @buf:		Pointer to the TX buffer.
+ * @len:		Length of the TX buffer.
+ * @iova:		Pointer to store the mapped DMA address.
+ *
+ * This function is used to prepare the buffers for DMA TX.
+ *
+ * Return: 0 on success, standard Linux error codes on failure.
+ */
+int geni_se_tx_dma_prep(struct geni_se *se, void *buf, size_t len,
+			dma_addr_t *iova)
+{
+	struct geni_wrapper *wrapper = se->wrapper;
+	u32 val;
+
+	*iova = dma_map_single(wrapper->dev, buf, len, DMA_TO_DEVICE);
+	if (dma_mapping_error(wrapper->dev, *iova))
+		return -EIO;
+
+	val = GENI_SE_DMA_DONE_EN;
+	val |= GENI_SE_DMA_EOT_EN;
+	val |= GENI_SE_DMA_AHB_ERR_EN;
+	writel_relaxed(val, se->base + SE_DMA_TX_IRQ_EN_SET);
+	writel_relaxed(lower_32_bits(*iova), se->base + SE_DMA_TX_PTR_L);
+	writel_relaxed(upper_32_bits(*iova), se->base + SE_DMA_TX_PTR_H);
+	writel_relaxed(GENI_SE_DMA_EOT_BUF, se->base + SE_DMA_TX_ATTR);
+	writel_relaxed(len, se->base + SE_DMA_TX_LEN);
+	return 0;
+}
+EXPORT_SYMBOL(geni_se_tx_dma_prep);
+
+/**
+ * geni_se_rx_dma_prep() - Prepare the serial engine for RX DMA transfer
+ * @se:			Pointer to the concerned serial engine.
+ * @buf:		Pointer to the RX buffer.
+ * @len:		Length of the RX buffer.
+ * @iova:		Pointer to store the mapped DMA address.
+ *
+ * This function is used to prepare the buffers for DMA RX.
+ *
+ * Return: 0 on success, standard Linux error codes on failure.
+ */
+int geni_se_rx_dma_prep(struct geni_se *se, void *buf, size_t len,
+			dma_addr_t *iova)
+{
+	struct geni_wrapper *wrapper = se->wrapper;
+	u32 val;
+
+	*iova = dma_map_single(wrapper->dev, buf, len, DMA_FROM_DEVICE);
+	if (dma_mapping_error(wrapper->dev, *iova))
+		return -EIO;
+
+	val = GENI_SE_DMA_DONE_EN;
+	val |= GENI_SE_DMA_EOT_EN;
+	val |= GENI_SE_DMA_AHB_ERR_EN;
+	writel_relaxed(val, se->base + SE_DMA_RX_IRQ_EN_SET);
+	writel_relaxed(lower_32_bits(*iova), se->base + SE_DMA_RX_PTR_L);
+	writel_relaxed(upper_32_bits(*iova), se->base + SE_DMA_RX_PTR_H);
+	/* RX does not have EOT buffer type bit. So just reset RX_ATTR */
+	writel_relaxed(0, se->base + SE_DMA_RX_ATTR);
+	writel_relaxed(len, se->base + SE_DMA_RX_LEN);
+	return 0;
+}
+EXPORT_SYMBOL(geni_se_rx_dma_prep);
+
+/**
+ * geni_se_tx_dma_unprep() - Unprepare the serial engine after TX DMA transfer
+ * @se:			Pointer to the concerned serial engine.
+ * @iova:		DMA address of the TX buffer.
+ * @len:		Length of the TX buffer.
+ *
+ * This function is used to unprepare the DMA buffers after DMA TX.
+ */
+void geni_se_tx_dma_unprep(struct geni_se *se, dma_addr_t iova, size_t len)
+{
+	struct geni_wrapper *wrapper = se->wrapper;
+
+	if (iova && !dma_mapping_error(wrapper->dev, iova))
+		dma_unmap_single(wrapper->dev, iova, len, DMA_TO_DEVICE);
+}
+EXPORT_SYMBOL(geni_se_tx_dma_unprep);
+
+/**
+ * geni_se_rx_dma_unprep() - Unprepare the serial engine after RX DMA transfer
+ * @se:			Pointer to the concerned serial engine.
+ * @iova:		DMA address of the RX buffer.
+ * @len:		Length of the RX buffer.
+ *
+ * This function is used to unprepare the DMA buffers after DMA RX.
+ */
+void geni_se_rx_dma_unprep(struct geni_se *se, dma_addr_t iova, size_t len)
+{
+	struct geni_wrapper *wrapper = se->wrapper;
+
+	if (iova && !dma_mapping_error(wrapper->dev, iova))
+		dma_unmap_single(wrapper->dev, iova, len, DMA_FROM_DEVICE);
+}
+EXPORT_SYMBOL(geni_se_rx_dma_unprep);
+
+static int geni_se_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct geni_wrapper *wrapper;
+	int ret;
+
+	wrapper = devm_kzalloc(dev, sizeof(*wrapper), GFP_KERNEL);
+	if (!wrapper)
+		return -ENOMEM;
+
+	wrapper->dev = dev;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	wrapper->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(wrapper->base))
+		return PTR_ERR(wrapper->base);
+
+	wrapper->ahb_clks[0].id = "m-ahb";
+	wrapper->ahb_clks[1].id = "s-ahb";
+	ret = devm_clk_bulk_get(dev, NUM_AHB_CLKS, wrapper->ahb_clks);
+	if (ret) {
+		dev_err(dev, "Err getting AHB clks %d\n", ret);
+		return ret;
+	}
+
+	dev_set_drvdata(dev, wrapper);
+	dev_dbg(dev, "GENI SE Driver probed\n");
+	return devm_of_platform_populate(dev);
+}
+
+static const struct of_device_id geni_se_dt_match[] = {
+	{ .compatible = "qcom,geni-se-qup", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, geni_se_dt_match);
+
+static struct platform_driver geni_se_driver = {
+	.driver = {
+		.name = "geni_se_qup",
+		.of_match_table = geni_se_dt_match,
+	},
+	.probe = geni_se_probe,
+};
+module_platform_driver(geni_se_driver);
+
+MODULE_DESCRIPTION("GENI Serial Engine Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/qcom/qmi_interface.c b/drivers/soc/qcom/qmi_interface.c
index 321982277697..938ca41c56cd 100644
--- a/drivers/soc/qcom/qmi_interface.c
+++ b/drivers/soc/qcom/qmi_interface.c
@@ -639,10 +639,11 @@ int qmi_handle_init(struct qmi_handle *qmi, size_t recv_buf_size,
 	if (ops)
 		qmi->ops = *ops;
 
+	/* Make room for the header */
+	recv_buf_size += sizeof(struct qmi_header);
+	/* Must also be sufficient to hold a control packet */
 	if (recv_buf_size < sizeof(struct qrtr_ctrl_pkt))
 		recv_buf_size = sizeof(struct qrtr_ctrl_pkt);
-	else
-		recv_buf_size += sizeof(struct qmi_header);
 
 	qmi->recv_buf_size = recv_buf_size;
 	qmi->recv_buf = kzalloc(recv_buf_size, GFP_KERNEL);
diff --git a/drivers/soc/qcom/smd-rpm.c b/drivers/soc/qcom/smd-rpm.c
index c2346752b3ea..93517ed83355 100644
--- a/drivers/soc/qcom/smd-rpm.c
+++ b/drivers/soc/qcom/smd-rpm.c
@@ -226,6 +226,7 @@ static const struct of_device_id qcom_smd_rpm_of_match[] = {
 	{ .compatible = "qcom,rpm-msm8916" },
 	{ .compatible = "qcom,rpm-msm8974" },
 	{ .compatible = "qcom,rpm-msm8996" },
+	{ .compatible = "qcom,rpm-msm8998" },
 	{}
 };
 MODULE_DEVICE_TABLE(of, qcom_smd_rpm_of_match);
diff --git a/drivers/soc/qcom/smem.c b/drivers/soc/qcom/smem.c
index 0b94d62fad2b..70b2ee80d6bd 100644
--- a/drivers/soc/qcom/smem.c
+++ b/drivers/soc/qcom/smem.c
@@ -280,7 +280,7 @@ struct qcom_smem {
 	struct smem_region regions[0];
 };
 
-static struct smem_private_entry *
+static void *
 phdr_to_last_uncached_entry(struct smem_partition_header *phdr)
 {
 	void *p = phdr;
@@ -288,15 +288,18 @@ phdr_to_last_uncached_entry(struct smem_partition_header *phdr)
 	return p + le32_to_cpu(phdr->offset_free_uncached);
 }
 
-static void *phdr_to_first_cached_entry(struct smem_partition_header *phdr,
+static struct smem_private_entry *
+phdr_to_first_cached_entry(struct smem_partition_header *phdr,
 					size_t cacheline)
 {
 	void *p = phdr;
+	struct smem_private_entry *e;
 
-	return p + le32_to_cpu(phdr->size) - ALIGN(sizeof(*phdr), cacheline);
+	return p + le32_to_cpu(phdr->size) - ALIGN(sizeof(*e), cacheline);
 }
 
-static void *phdr_to_last_cached_entry(struct smem_partition_header *phdr)
+static void *
+phdr_to_last_cached_entry(struct smem_partition_header *phdr)
 {
 	void *p = phdr;
 
@@ -361,14 +364,14 @@ static int qcom_smem_alloc_private(struct qcom_smem *smem,
 	end = phdr_to_last_uncached_entry(phdr);
 	cached = phdr_to_last_cached_entry(phdr);
 
-	while (hdr < end) {
-		if (hdr->canary != SMEM_PRIVATE_CANARY) {
-			dev_err(smem->dev,
-				"Found invalid canary in hosts %d:%d partition\n",
-				phdr->host0, phdr->host1);
-			return -EINVAL;
-		}
+	if (smem->global_partition) {
+		dev_err(smem->dev, "Already found the global partition\n");
+		return -EINVAL;
+	}
 
+	while (hdr < end) {
+		if (hdr->canary != SMEM_PRIVATE_CANARY)
+			goto bad_canary;
 		if (le16_to_cpu(hdr->item) == item)
 			return -EEXIST;
 
@@ -377,7 +380,7 @@ static int qcom_smem_alloc_private(struct qcom_smem *smem,
 
 	/* Check that we don't grow into the cached region */
 	alloc_size = sizeof(*hdr) + ALIGN(size, 8);
-	if ((void *)hdr + alloc_size >= cached) {
+	if ((void *)hdr + alloc_size > cached) {
 		dev_err(smem->dev, "Out of memory\n");
 		return -ENOSPC;
 	}
@@ -397,6 +400,11 @@ static int qcom_smem_alloc_private(struct qcom_smem *smem,
 	le32_add_cpu(&phdr->offset_free_uncached, alloc_size);
 
 	return 0;
+bad_canary:
+	dev_err(smem->dev, "Found invalid canary in hosts %hu:%hu partition\n",
+		le16_to_cpu(phdr->host0), le16_to_cpu(phdr->host1));
+
+	return -EINVAL;
 }
 
 static int qcom_smem_alloc_global(struct qcom_smem *smem,
@@ -560,8 +568,8 @@ static void *qcom_smem_get_private(struct qcom_smem *smem,
 	return ERR_PTR(-ENOENT);
 
 invalid_canary:
-	dev_err(smem->dev, "Found invalid canary in hosts %d:%d partition\n",
-			phdr->host0, phdr->host1);
+	dev_err(smem->dev, "Found invalid canary in hosts %hu:%hu partition\n",
+			le16_to_cpu(phdr->host0), le16_to_cpu(phdr->host1));
 
 	return ERR_PTR(-EINVAL);
 }
@@ -647,6 +655,33 @@ int qcom_smem_get_free_space(unsigned host)
 }
 EXPORT_SYMBOL(qcom_smem_get_free_space);
 
+/**
+ * qcom_smem_virt_to_phys() - return the physical address associated
+ * with an smem item pointer (previously returned by qcom_smem_get()
+ * @p:	the virtual address to convert
+ *
+ * Returns 0 if the pointer provided is not within any smem region.
+ */
+phys_addr_t qcom_smem_virt_to_phys(void *p)
+{
+	unsigned i;
+
+	for (i = 0; i < __smem->num_regions; i++) {
+		struct smem_region *region = &__smem->regions[i];
+
+		if (p < region->virt_base)
+			continue;
+		if (p < region->virt_base + region->size) {
+			u64 offset = p - region->virt_base;
+
+			return (phys_addr_t)region->aux_base + offset;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(qcom_smem_virt_to_phys);
+
 static int qcom_smem_get_sbl_version(struct qcom_smem *smem)
 {
 	struct smem_header *header;
@@ -695,9 +730,10 @@ static u32 qcom_smem_get_item_count(struct qcom_smem *smem)
 static int qcom_smem_set_global_partition(struct qcom_smem *smem)
 {
 	struct smem_partition_header *header;
-	struct smem_ptable_entry *entry = NULL;
+	struct smem_ptable_entry *entry;
 	struct smem_ptable *ptable;
 	u32 host0, host1, size;
+	bool found = false;
 	int i;
 
 	ptable = qcom_smem_get_ptable(smem);
@@ -709,11 +745,13 @@ static int qcom_smem_set_global_partition(struct qcom_smem *smem)
 		host0 = le16_to_cpu(entry->host0);
 		host1 = le16_to_cpu(entry->host1);
 
-		if (host0 == SMEM_GLOBAL_HOST && host0 == host1)
+		if (host0 == SMEM_GLOBAL_HOST && host0 == host1) {
+			found = true;
 			break;
+		}
 	}
 
-	if (!entry) {
+	if (!found) {
 		dev_err(smem->dev, "Missing entry for global partition\n");
 		return -EINVAL;
 	}
@@ -723,11 +761,6 @@ static int qcom_smem_set_global_partition(struct qcom_smem *smem)
 		return -EINVAL;
 	}
 
-	if (smem->global_partition) {
-		dev_err(smem->dev, "Already found the global partition\n");
-		return -EINVAL;
-	}
-
 	header = smem->regions[0].virt_base + le32_to_cpu(entry->offset);
 	host0 = le16_to_cpu(header->host0);
 	host1 = le16_to_cpu(header->host1);
diff --git a/include/linux/qcom-geni-se.h b/include/linux/qcom-geni-se.h
new file mode 100644
index 000000000000..5d6144977828
--- /dev/null
+++ b/include/linux/qcom-geni-se.h
@@ -0,0 +1,425 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _LINUX_QCOM_GENI_SE
+#define _LINUX_QCOM_GENI_SE
+
+/* Transfer mode supported by GENI Serial Engines */
+enum geni_se_xfer_mode {
+	GENI_SE_INVALID,
+	GENI_SE_FIFO,
+	GENI_SE_DMA,
+};
+
+/* Protocols supported by GENI Serial Engines */
+enum geni_se_protocol_type {
+	GENI_SE_NONE,
+	GENI_SE_SPI,
+	GENI_SE_UART,
+	GENI_SE_I2C,
+	GENI_SE_I3C,
+};
+
+struct geni_wrapper;
+struct clk;
+
+/**
+ * struct geni_se - GENI Serial Engine
+ * @base:		Base Address of the Serial Engine's register block
+ * @dev:		Pointer to the Serial Engine device
+ * @wrapper:		Pointer to the parent QUP Wrapper core
+ * @clk:		Handle to the core serial engine clock
+ * @num_clk_levels:	Number of valid clock levels in clk_perf_tbl
+ * @clk_perf_tbl:	Table of clock frequency input to serial engine clock
+ */
+struct geni_se {
+	void __iomem *base;
+	struct device *dev;
+	struct geni_wrapper *wrapper;
+	struct clk *clk;
+	unsigned int num_clk_levels;
+	unsigned long *clk_perf_tbl;
+};
+
+/* Common SE registers */
+#define GENI_FORCE_DEFAULT_REG		0x20
+#define SE_GENI_STATUS			0x40
+#define GENI_SER_M_CLK_CFG		0x48
+#define GENI_SER_S_CLK_CFG		0x4c
+#define GENI_FW_REVISION_RO		0x68
+#define SE_GENI_CLK_SEL			0x7c
+#define SE_GENI_DMA_MODE_EN		0x258
+#define SE_GENI_M_CMD0			0x600
+#define SE_GENI_M_CMD_CTRL_REG		0x604
+#define SE_GENI_M_IRQ_STATUS		0x610
+#define SE_GENI_M_IRQ_EN		0x614
+#define SE_GENI_M_IRQ_CLEAR		0x618
+#define SE_GENI_S_CMD0			0x630
+#define SE_GENI_S_CMD_CTRL_REG		0x634
+#define SE_GENI_S_IRQ_STATUS		0x640
+#define SE_GENI_S_IRQ_EN		0x644
+#define SE_GENI_S_IRQ_CLEAR		0x648
+#define SE_GENI_TX_FIFOn		0x700
+#define SE_GENI_RX_FIFOn		0x780
+#define SE_GENI_TX_FIFO_STATUS		0x800
+#define SE_GENI_RX_FIFO_STATUS		0x804
+#define SE_GENI_TX_WATERMARK_REG	0x80c
+#define SE_GENI_RX_WATERMARK_REG	0x810
+#define SE_GENI_RX_RFR_WATERMARK_REG	0x814
+#define SE_GENI_IOS			0x908
+#define SE_DMA_TX_IRQ_STAT		0xc40
+#define SE_DMA_TX_IRQ_CLR		0xc44
+#define SE_DMA_TX_FSM_RST		0xc58
+#define SE_DMA_RX_IRQ_STAT		0xd40
+#define SE_DMA_RX_IRQ_CLR		0xd44
+#define SE_DMA_RX_FSM_RST		0xd58
+#define SE_HW_PARAM_0			0xe24
+#define SE_HW_PARAM_1			0xe28
+
+/* GENI_FORCE_DEFAULT_REG fields */
+#define FORCE_DEFAULT	BIT(0)
+
+/* GENI_STATUS fields */
+#define M_GENI_CMD_ACTIVE		BIT(0)
+#define S_GENI_CMD_ACTIVE		BIT(12)
+
+/* GENI_SER_M_CLK_CFG/GENI_SER_S_CLK_CFG */
+#define SER_CLK_EN			BIT(0)
+#define CLK_DIV_MSK			GENMASK(15, 4)
+#define CLK_DIV_SHFT			4
+
+/* GENI_FW_REVISION_RO fields */
+#define FW_REV_PROTOCOL_MSK		GENMASK(15, 8)
+#define FW_REV_PROTOCOL_SHFT		8
+
+/* GENI_CLK_SEL fields */
+#define CLK_SEL_MSK			GENMASK(2, 0)
+
+/* SE_GENI_DMA_MODE_EN */
+#define GENI_DMA_MODE_EN		BIT(0)
+
+/* GENI_M_CMD0 fields */
+#define M_OPCODE_MSK			GENMASK(31, 27)
+#define M_OPCODE_SHFT			27
+#define M_PARAMS_MSK			GENMASK(26, 0)
+
+/* GENI_M_CMD_CTRL_REG */
+#define M_GENI_CMD_CANCEL		BIT(2)
+#define M_GENI_CMD_ABORT		BIT(1)
+#define M_GENI_DISABLE			BIT(0)
+
+/* GENI_S_CMD0 fields */
+#define S_OPCODE_MSK			GENMASK(31, 27)
+#define S_OPCODE_SHFT			27
+#define S_PARAMS_MSK			GENMASK(26, 0)
+
+/* GENI_S_CMD_CTRL_REG */
+#define S_GENI_CMD_CANCEL		BIT(2)
+#define S_GENI_CMD_ABORT		BIT(1)
+#define S_GENI_DISABLE			BIT(0)
+
+/* GENI_M_IRQ_EN fields */
+#define M_CMD_DONE_EN			BIT(0)
+#define M_CMD_OVERRUN_EN		BIT(1)
+#define M_ILLEGAL_CMD_EN		BIT(2)
+#define M_CMD_FAILURE_EN		BIT(3)
+#define M_CMD_CANCEL_EN			BIT(4)
+#define M_CMD_ABORT_EN			BIT(5)
+#define M_TIMESTAMP_EN			BIT(6)
+#define M_RX_IRQ_EN			BIT(7)
+#define M_GP_SYNC_IRQ_0_EN		BIT(8)
+#define M_GP_IRQ_0_EN			BIT(9)
+#define M_GP_IRQ_1_EN			BIT(10)
+#define M_GP_IRQ_2_EN			BIT(11)
+#define M_GP_IRQ_3_EN			BIT(12)
+#define M_GP_IRQ_4_EN			BIT(13)
+#define M_GP_IRQ_5_EN			BIT(14)
+#define M_IO_DATA_DEASSERT_EN		BIT(22)
+#define M_IO_DATA_ASSERT_EN		BIT(23)
+#define M_RX_FIFO_RD_ERR_EN		BIT(24)
+#define M_RX_FIFO_WR_ERR_EN		BIT(25)
+#define M_RX_FIFO_WATERMARK_EN		BIT(26)
+#define M_RX_FIFO_LAST_EN		BIT(27)
+#define M_TX_FIFO_RD_ERR_EN		BIT(28)
+#define M_TX_FIFO_WR_ERR_EN		BIT(29)
+#define M_TX_FIFO_WATERMARK_EN		BIT(30)
+#define M_SEC_IRQ_EN			BIT(31)
+#define M_COMMON_GENI_M_IRQ_EN	(GENMASK(6, 1) | \
+				M_IO_DATA_DEASSERT_EN | \
+				M_IO_DATA_ASSERT_EN | M_RX_FIFO_RD_ERR_EN | \
+				M_RX_FIFO_WR_ERR_EN | M_TX_FIFO_RD_ERR_EN | \
+				M_TX_FIFO_WR_ERR_EN)
+
+/* GENI_S_IRQ_EN fields */
+#define S_CMD_DONE_EN			BIT(0)
+#define S_CMD_OVERRUN_EN		BIT(1)
+#define S_ILLEGAL_CMD_EN		BIT(2)
+#define S_CMD_FAILURE_EN		BIT(3)
+#define S_CMD_CANCEL_EN			BIT(4)
+#define S_CMD_ABORT_EN			BIT(5)
+#define S_GP_SYNC_IRQ_0_EN		BIT(8)
+#define S_GP_IRQ_0_EN			BIT(9)
+#define S_GP_IRQ_1_EN			BIT(10)
+#define S_GP_IRQ_2_EN			BIT(11)
+#define S_GP_IRQ_3_EN			BIT(12)
+#define S_GP_IRQ_4_EN			BIT(13)
+#define S_GP_IRQ_5_EN			BIT(14)
+#define S_IO_DATA_DEASSERT_EN		BIT(22)
+#define S_IO_DATA_ASSERT_EN		BIT(23)
+#define S_RX_FIFO_RD_ERR_EN		BIT(24)
+#define S_RX_FIFO_WR_ERR_EN		BIT(25)
+#define S_RX_FIFO_WATERMARK_EN		BIT(26)
+#define S_RX_FIFO_LAST_EN		BIT(27)
+#define S_COMMON_GENI_S_IRQ_EN	(GENMASK(5, 1) | GENMASK(13, 9) | \
+				 S_RX_FIFO_RD_ERR_EN | S_RX_FIFO_WR_ERR_EN)
+
+/*  GENI_/TX/RX/RX_RFR/_WATERMARK_REG fields */
+#define WATERMARK_MSK			GENMASK(5, 0)
+
+/* GENI_TX_FIFO_STATUS fields */
+#define TX_FIFO_WC			GENMASK(27, 0)
+
+/*  GENI_RX_FIFO_STATUS fields */
+#define RX_LAST				BIT(31)
+#define RX_LAST_BYTE_VALID_MSK		GENMASK(30, 28)
+#define RX_LAST_BYTE_VALID_SHFT		28
+#define RX_FIFO_WC_MSK			GENMASK(24, 0)
+
+/* SE_GENI_IOS fields */
+#define IO2_DATA_IN			BIT(1)
+#define RX_DATA_IN			BIT(0)
+
+/* SE_DMA_TX_IRQ_STAT Register fields */
+#define TX_DMA_DONE			BIT(0)
+#define TX_EOT				BIT(1)
+#define TX_SBE				BIT(2)
+#define TX_RESET_DONE			BIT(3)
+
+/* SE_DMA_RX_IRQ_STAT Register fields */
+#define RX_DMA_DONE			BIT(0)
+#define RX_EOT				BIT(1)
+#define RX_SBE				BIT(2)
+#define RX_RESET_DONE			BIT(3)
+#define RX_FLUSH_DONE			BIT(4)
+#define RX_GENI_GP_IRQ			GENMASK(10, 5)
+#define RX_GENI_CANCEL_IRQ		BIT(11)
+#define RX_GENI_GP_IRQ_EXT		GENMASK(13, 12)
+
+/* SE_HW_PARAM_0 fields */
+#define TX_FIFO_WIDTH_MSK		GENMASK(29, 24)
+#define TX_FIFO_WIDTH_SHFT		24
+#define TX_FIFO_DEPTH_MSK		GENMASK(21, 16)
+#define TX_FIFO_DEPTH_SHFT		16
+
+/* SE_HW_PARAM_1 fields */
+#define RX_FIFO_WIDTH_MSK		GENMASK(29, 24)
+#define RX_FIFO_WIDTH_SHFT		24
+#define RX_FIFO_DEPTH_MSK		GENMASK(21, 16)
+#define RX_FIFO_DEPTH_SHFT		16
+
+#define HW_VER_MAJOR_MASK		GENMASK(31, 28)
+#define HW_VER_MAJOR_SHFT		28
+#define HW_VER_MINOR_MASK		GENMASK(27, 16)
+#define HW_VER_MINOR_SHFT		16
+#define HW_VER_STEP_MASK		GENMASK(15, 0)
+
+#if IS_ENABLED(CONFIG_QCOM_GENI_SE)
+
+u32 geni_se_get_qup_hw_version(struct geni_se *se);
+
+#define geni_se_get_wrapper_version(se, major, minor, step) do { \
+	u32 ver; \
+\
+	ver = geni_se_get_qup_hw_version(se); \
+	major = (ver & HW_VER_MAJOR_MASK) >> HW_VER_MAJOR_SHFT; \
+	minor = (ver & HW_VER_MINOR_MASK) >> HW_VER_MINOR_SHFT; \
+	step = version & HW_VER_STEP_MASK; \
+} while (0)
+
+/**
+ * geni_se_read_proto() - Read the protocol configured for a serial engine
+ * @se:		Pointer to the concerned serial engine.
+ *
+ * Return: Protocol value as configured in the serial engine.
+ */
+static inline u32 geni_se_read_proto(struct geni_se *se)
+{
+	u32 val;
+
+	val = readl_relaxed(se->base + GENI_FW_REVISION_RO);
+
+	return (val & FW_REV_PROTOCOL_MSK) >> FW_REV_PROTOCOL_SHFT;
+}
+
+/**
+ * geni_se_setup_m_cmd() - Setup the primary sequencer
+ * @se:		Pointer to the concerned serial engine.
+ * @cmd:	Command/Operation to setup in the primary sequencer.
+ * @params:	Parameter for the sequencer command.
+ *
+ * This function is used to configure the primary sequencer with the
+ * command and its associated parameters.
+ */
+static inline void geni_se_setup_m_cmd(struct geni_se *se, u32 cmd, u32 params)
+{
+	u32 m_cmd;
+
+	m_cmd = (cmd << M_OPCODE_SHFT) | (params & M_PARAMS_MSK);
+	writel_relaxed(m_cmd, se->base + SE_GENI_M_CMD0);
+}
+
+/**
+ * geni_se_setup_s_cmd() - Setup the secondary sequencer
+ * @se:		Pointer to the concerned serial engine.
+ * @cmd:	Command/Operation to setup in the secondary sequencer.
+ * @params:	Parameter for the sequencer command.
+ *
+ * This function is used to configure the secondary sequencer with the
+ * command and its associated parameters.
+ */
+static inline void geni_se_setup_s_cmd(struct geni_se *se, u32 cmd, u32 params)
+{
+	u32 s_cmd;
+
+	s_cmd = readl_relaxed(se->base + SE_GENI_S_CMD0);
+	s_cmd &= ~(S_OPCODE_MSK | S_PARAMS_MSK);
+	s_cmd |= (cmd << S_OPCODE_SHFT);
+	s_cmd |= (params & S_PARAMS_MSK);
+	writel_relaxed(s_cmd, se->base + SE_GENI_S_CMD0);
+}
+
+/**
+ * geni_se_cancel_m_cmd() - Cancel the command configured in the primary
+ *                          sequencer
+ * @se:	Pointer to the concerned serial engine.
+ *
+ * This function is used to cancel the currently configured command in the
+ * primary sequencer.
+ */
+static inline void geni_se_cancel_m_cmd(struct geni_se *se)
+{
+	writel_relaxed(M_GENI_CMD_CANCEL, se->base + SE_GENI_M_CMD_CTRL_REG);
+}
+
+/**
+ * geni_se_cancel_s_cmd() - Cancel the command configured in the secondary
+ *                          sequencer
+ * @se:	Pointer to the concerned serial engine.
+ *
+ * This function is used to cancel the currently configured command in the
+ * secondary sequencer.
+ */
+static inline void geni_se_cancel_s_cmd(struct geni_se *se)
+{
+	writel_relaxed(S_GENI_CMD_CANCEL, se->base + SE_GENI_S_CMD_CTRL_REG);
+}
+
+/**
+ * geni_se_abort_m_cmd() - Abort the command configured in the primary sequencer
+ * @se:	Pointer to the concerned serial engine.
+ *
+ * This function is used to force abort the currently configured command in the
+ * primary sequencer.
+ */
+static inline void geni_se_abort_m_cmd(struct geni_se *se)
+{
+	writel_relaxed(M_GENI_CMD_ABORT, se->base + SE_GENI_M_CMD_CTRL_REG);
+}
+
+/**
+ * geni_se_abort_s_cmd() - Abort the command configured in the secondary
+ *                         sequencer
+ * @se:	Pointer to the concerned serial engine.
+ *
+ * This function is used to force abort the currently configured command in the
+ * secondary sequencer.
+ */
+static inline void geni_se_abort_s_cmd(struct geni_se *se)
+{
+	writel_relaxed(S_GENI_CMD_ABORT, se->base + SE_GENI_S_CMD_CTRL_REG);
+}
+
+/**
+ * geni_se_get_tx_fifo_depth() - Get the TX fifo depth of the serial engine
+ * @se:	Pointer to the concerned serial engine.
+ *
+ * This function is used to get the depth i.e. number of elements in the
+ * TX fifo of the serial engine.
+ *
+ * Return: TX fifo depth in units of FIFO words.
+ */
+static inline u32 geni_se_get_tx_fifo_depth(struct geni_se *se)
+{
+	u32 val;
+
+	val = readl_relaxed(se->base + SE_HW_PARAM_0);
+
+	return (val & TX_FIFO_DEPTH_MSK) >> TX_FIFO_DEPTH_SHFT;
+}
+
+/**
+ * geni_se_get_tx_fifo_width() - Get the TX fifo width of the serial engine
+ * @se:	Pointer to the concerned serial engine.
+ *
+ * This function is used to get the width i.e. word size per element in the
+ * TX fifo of the serial engine.
+ *
+ * Return: TX fifo width in bits
+ */
+static inline u32 geni_se_get_tx_fifo_width(struct geni_se *se)
+{
+	u32 val;
+
+	val = readl_relaxed(se->base + SE_HW_PARAM_0);
+
+	return (val & TX_FIFO_WIDTH_MSK) >> TX_FIFO_WIDTH_SHFT;
+}
+
+/**
+ * geni_se_get_rx_fifo_depth() - Get the RX fifo depth of the serial engine
+ * @se:	Pointer to the concerned serial engine.
+ *
+ * This function is used to get the depth i.e. number of elements in the
+ * RX fifo of the serial engine.
+ *
+ * Return: RX fifo depth in units of FIFO words
+ */
+static inline u32 geni_se_get_rx_fifo_depth(struct geni_se *se)
+{
+	u32 val;
+
+	val = readl_relaxed(se->base + SE_HW_PARAM_1);
+
+	return (val & RX_FIFO_DEPTH_MSK) >> RX_FIFO_DEPTH_SHFT;
+}
+
+void geni_se_init(struct geni_se *se, u32 rx_wm, u32 rx_rfr);
+
+void geni_se_select_mode(struct geni_se *se, enum geni_se_xfer_mode mode);
+
+void geni_se_config_packing(struct geni_se *se, int bpw, int pack_words,
+			    bool msb_to_lsb, bool tx_cfg, bool rx_cfg);
+
+int geni_se_resources_off(struct geni_se *se);
+
+int geni_se_resources_on(struct geni_se *se);
+
+int geni_se_clk_tbl_get(struct geni_se *se, unsigned long **tbl);
+
+int geni_se_clk_freq_match(struct geni_se *se, unsigned long req_freq,
+			   unsigned int *index, unsigned long *res_freq,
+			   bool exact);
+
+int geni_se_tx_dma_prep(struct geni_se *se, void *buf, size_t len,
+			dma_addr_t *iova);
+
+int geni_se_rx_dma_prep(struct geni_se *se, void *buf, size_t len,
+			dma_addr_t *iova);
+
+void geni_se_tx_dma_unprep(struct geni_se *se, dma_addr_t iova, size_t len);
+
+void geni_se_rx_dma_unprep(struct geni_se *se, dma_addr_t iova, size_t len);
+#endif
+#endif
diff --git a/include/linux/soc/qcom/smem.h b/include/linux/soc/qcom/smem.h
index c1657ed27b30..86e1b358688a 100644
--- a/include/linux/soc/qcom/smem.h
+++ b/include/linux/soc/qcom/smem.h
@@ -9,4 +9,6 @@ void *qcom_smem_get(unsigned host, unsigned item, size_t *size);
 
 int qcom_smem_get_free_space(unsigned host);
 
+phys_addr_t qcom_smem_virt_to_phys(void *p);
+
 #endif
diff --git a/include/soc/qcom/cmd-db.h b/include/soc/qcom/cmd-db.h
new file mode 100644
index 000000000000..578180cbc134
--- /dev/null
+++ b/include/soc/qcom/cmd-db.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2016-2018, The Linux Foundation. All rights reserved. */
+
+#ifndef __QCOM_COMMAND_DB_H__
+#define __QCOM_COMMAND_DB_H__
+
+
+enum cmd_db_hw_type {
+	CMD_DB_HW_INVALID = 0,
+	CMD_DB_HW_MIN     = 3,
+	CMD_DB_HW_ARC     = CMD_DB_HW_MIN,
+	CMD_DB_HW_VRM     = 4,
+	CMD_DB_HW_BCM     = 5,
+	CMD_DB_HW_MAX     = CMD_DB_HW_BCM,
+	CMD_DB_HW_ALL     = 0xff,
+};
+
+#if IS_ENABLED(CONFIG_QCOM_COMMAND_DB)
+u32 cmd_db_read_addr(const char *resource_id);
+
+int cmd_db_read_aux_data(const char *resource_id, u8 *data, size_t len);
+
+size_t cmd_db_read_aux_data_len(const char *resource_id);
+
+enum cmd_db_hw_type cmd_db_read_slave_id(const char *resource_id);
+
+int cmd_db_ready(void);
+#else
+static inline u32 cmd_db_read_addr(const char *resource_id)
+{ return 0; }
+
+static inline int cmd_db_read_aux_data(const char *resource_id, u8 *data,
+				       size_t len)
+{ return -ENODEV; }
+
+static inline size_t cmd_db_read_aux_data_len(const char *resource_id)
+{ return -ENODEV; }
+
+static inline enum cmd_db_hw_type cmd_db_read_slave_id(const char *resource_id)
+{ return -ENODEV; }
+
+static inline int cmd_db_ready(void)
+{ return -ENODEV; }
+#endif /* CONFIG_QCOM_COMMAND_DB */
+#endif /* __QCOM_COMMAND_DB_H__ */