diff options
author | Ard Biesheuvel <ardb@kernel.org> | 2020-06-12 12:21:35 +0200 |
---|---|---|
committer | Russell King <rmk+kernel@armlinux.org.uk> | 2020-06-13 12:11:18 +0200 |
commit | db227c19e68db353e4cc6c99b6bc86bb24736943 (patch) | |
tree | bd3a465bb4cb24f075257d062ffcfe9a2ec9a8d6 | |
parent | ARM: 8984/1: Kconfig: set default ZBOOT_ROM_TEXT/BSS value to 0x0 (diff) | |
download | linux-db227c19e68db353e4cc6c99b6bc86bb24736943.tar.xz linux-db227c19e68db353e4cc6c99b6bc86bb24736943.zip |
ARM: 8985/1: efi/decompressor: deal with HYP mode boot gracefully
EFI on ARM only supports short descriptors, and given that it mandates
that the MMU and caches are on, it is implied that booting in HYP mode
is not supported.
However, implementations of EFI exist (i.e., U-Boot) that ignore this
requirement, which is not entirely unreasonable, given that it makes
HYP mode inaccessible to the operating system.
So let's make sure that we can deal with this condition gracefully.
We already tolerate booting the EFI stub with the caches off (even
though this violates the EFI spec as well), and so we should deal
with HYP mode boot with MMU and caches either on or off.
- When the MMU and caches are on, we can ignore the HYP stub altogether,
since we can carry on executing at HYP. We do need to ensure that we
disable the MMU at HYP before entering the kernel proper.
- When the MMU and caches are off, we have to drop to SVC mode so that
we can set up the page tables using short descriptors. In this case,
we need to install the HYP stub as usual, so that we can return to HYP
mode before handing over to the kernel proper.
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-rw-r--r-- | arch/arm/boot/compressed/head.S | 62 |
1 files changed, 62 insertions, 0 deletions
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index c79db44ba128..434a16982e34 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -1410,7 +1410,11 @@ memdump: mov r12, r0 __hyp_reentry_vectors: W(b) . @ reset W(b) . @ undef +#ifdef CONFIG_EFI_STUB + W(b) __enter_kernel_from_hyp @ hvc from HYP +#else W(b) . @ svc +#endif W(b) . @ pabort W(b) . @ dabort W(b) __enter_kernel @ hyp @@ -1429,14 +1433,72 @@ __enter_kernel: reloc_code_end: #ifdef CONFIG_EFI_STUB +__enter_kernel_from_hyp: + mrc p15, 4, r0, c1, c0, 0 @ read HSCTLR + bic r0, r0, #0x5 @ disable MMU and caches + mcr p15, 4, r0, c1, c0, 0 @ write HSCTLR + isb + b __enter_kernel + ENTRY(efi_enter_kernel) mov r4, r0 @ preserve image base mov r8, r1 @ preserve DT pointer + ARM( adrl r0, call_cache_fn ) + THUMB( adr r0, call_cache_fn ) + adr r1, 0f @ clean the region of code we + bl cache_clean_flush @ may run with the MMU off + +#ifdef CONFIG_ARM_VIRT_EXT + @ + @ The EFI spec does not support booting on ARM in HYP mode, + @ since it mandates that the MMU and caches are on, with all + @ 32-bit addressable DRAM mapped 1:1 using short descriptors. + @ + @ While the EDK2 reference implementation adheres to this, + @ U-Boot might decide to enter the EFI stub in HYP mode + @ anyway, with the MMU and caches either on or off. + @ + mrs r0, cpsr @ get the current mode + msr spsr_cxsf, r0 @ record boot mode + and r0, r0, #MODE_MASK @ are we running in HYP mode? + cmp r0, #HYP_MODE + bne .Lefi_svc + + mrc p15, 4, r1, c1, c0, 0 @ read HSCTLR + tst r1, #0x1 @ MMU enabled at HYP? + beq 1f + + @ + @ When running in HYP mode with the caches on, we're better + @ off just carrying on using the cached 1:1 mapping that the + @ firmware provided. Set up the HYP vectors so HVC instructions + @ issued from HYP mode take us to the correct handler code. We + @ will disable the MMU before jumping to the kernel proper. + @ + adr r0, __hyp_reentry_vectors + mcr p15, 4, r0, c12, c0, 0 @ set HYP vector base (HVBAR) + isb + b .Lefi_hyp + + @ + @ When running in HYP mode with the caches off, we need to drop + @ into SVC mode now, and let the decompressor set up its cached + @ 1:1 mapping as usual. + @ +1: mov r9, r4 @ preserve image base + bl __hyp_stub_install @ install HYP stub vectors + safe_svcmode_maskall r1 @ drop to SVC mode + msr spsr_cxsf, r0 @ record boot mode + orr r4, r9, #1 @ restore image base and set LSB + b .Lefi_hyp +.Lefi_svc: +#endif mrc p15, 0, r0, c1, c0, 0 @ read SCTLR tst r0, #0x1 @ MMU enabled? orreq r4, r4, #1 @ set LSB if not +.Lefi_hyp: mov r0, r8 @ DT start add r1, r8, r2 @ DT end bl cache_clean_flush |