ncr5380: Disable the DMA errata workaround flag by default

The only chip that needs the workarounds enabled is an early NMOS
device. That means that the common case is to disable them.

Unfortunately the sense of the flag is such that it has to be set
for the common case.

Rename the flag so that zero can be used to mean "no errata workarounds
needed". This simplifies the code.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

8 files changed, 14 insertions, 20 deletions

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 826b63d1aa84..69c73c36b923 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -457,7 +457,7 @@ static void prepare_info(struct Scsi_Host *instance)
 	         instance->base, instance->irq,
 	         instance->can_queue, instance->cmd_per_lun,
 	         instance->sg_tablesize, instance->this_id,
-	         hostdata->flags & FLAG_NO_DMA_FIXUP  ? "NO_DMA_FIXUP "  : "",
+	         hostdata->flags & FLAG_DMA_FIXUP     ? "DMA_FIXUP "     : "",
 	         hostdata->flags & FLAG_NO_PSEUDO_DMA ? "NO_PSEUDO_DMA " : "",
 	         hostdata->flags & FLAG_TOSHIBA_DELAY ? "TOSHIBA_DELAY "  : "",
 #ifdef AUTOPROBE_IRQ
@@ -1480,11 +1480,11 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
 	 * before the setting of DMA mode to after transfer of the last byte.
 	 */
 
-	if (hostdata->flags & FLAG_NO_DMA_FIXUP)
+	if (hostdata->flags & FLAG_DMA_FIXUP)
+		NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY);
+	else
 		NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY |
 		                        MR_ENABLE_EOP_INTR);
-	else
-		NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY);
 
 	dprintk(NDEBUG_DMA, "scsi%d : mode reg = 0x%X\n", instance->host_no, NCR5380_read(MODE_REG));
 
@@ -1540,8 +1540,8 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
 
 	if (p & SR_IO) {
 		foo = NCR5380_pread(instance, d,
-			hostdata->flags & FLAG_NO_DMA_FIXUP ? c : c - 1);
-		if (!foo && !(hostdata->flags & FLAG_NO_DMA_FIXUP)) {
+			hostdata->flags & FLAG_DMA_FIXUP ? c - 1 : c);
+		if (!foo && (hostdata->flags & FLAG_DMA_FIXUP)) {
 			/*
 			 * The workaround was to transfer fewer bytes than we
 			 * intended to with the pseudo-DMA read function, wait for
@@ -1571,7 +1571,7 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
 		}
 	} else {
 		foo = NCR5380_pwrite(instance, d, c);
-		if (!foo && !(hostdata->flags & FLAG_NO_DMA_FIXUP)) {
+		if (!foo && (hostdata->flags & FLAG_DMA_FIXUP)) {
 			/*
 			 * Wait for the last byte to be sent.  If REQ is being asserted for
 			 * the byte we're interested, we'll ACK it and it will go false.
diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h
index 0b03ba25bd66..7b488a082462 100644
--- a/drivers/scsi/NCR5380.h
+++ b/drivers/scsi/NCR5380.h
@@ -220,7 +220,7 @@
 #define NO_IRQ		0
 #endif
 
-#define FLAG_NO_DMA_FIXUP		1	/* No DMA errata workarounds */
+#define FLAG_DMA_FIXUP			1	/* Use DMA errata workarounds */
 #define FLAG_NO_PSEUDO_DMA		8	/* Inhibit DMA */
 #define FLAG_LATE_DMA_SETUP		32	/* Setup NCR before DMA H/W */
 #define FLAG_TAGGED_QUEUING		64	/* as X3T9.2 spelled it */
diff --git a/drivers/scsi/arm/cumana_1.c b/drivers/scsi/arm/cumana_1.c
index 221f18c5df93..76b2d3364d9f 100644
--- a/drivers/scsi/arm/cumana_1.c
+++ b/drivers/scsi/arm/cumana_1.c
@@ -239,7 +239,7 @@ static int cumanascsi1_probe(struct expansion_card *ec,
 
 	host->irq = ec->irq;
 
-	ret = NCR5380_init(host, 0);
+	ret = NCR5380_init(host, FLAG_DMA_FIXUP);
 	if (ret)
 		goto out_unmap;
 
diff --git a/drivers/scsi/arm/oak.c b/drivers/scsi/arm/oak.c
index 1fab1d1896b1..8d8426535e6d 100644
--- a/drivers/scsi/arm/oak.c
+++ b/drivers/scsi/arm/oak.c
@@ -143,7 +143,7 @@ static int oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
 	host->irq = NO_IRQ;
 	host->n_io_port = 255;
 
-	ret = NCR5380_init(host, 0);
+	ret = NCR5380_init(host, FLAG_DMA_FIXUP);
 	if (ret)
 		goto out_unmap;
 
diff --git a/drivers/scsi/dtc.c b/drivers/scsi/dtc.c
index 6c736b071cf4..30919f42759a 100644
--- a/drivers/scsi/dtc.c
+++ b/drivers/scsi/dtc.c
@@ -229,7 +229,7 @@ found:
 		instance->base = addr;
 		((struct NCR5380_hostdata *)(instance)->hostdata)->base = base;
 
-		if (NCR5380_init(instance, FLAG_NO_DMA_FIXUP))
+		if (NCR5380_init(instance, 0))
 			goto out_unregister;
 
 		NCR5380_maybe_reset_bus(instance);
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index b8fc26d9231d..aaeb6b6b4b16 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -348,23 +348,17 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
 		flags = 0;
 		switch (overrides[current_override].board) {
 		case BOARD_NCR5380:
-			flags = FLAG_NO_PSEUDO_DMA;
-			break;
-		case BOARD_NCR53C400:
-			flags = FLAG_NO_DMA_FIXUP;
+			flags = FLAG_NO_PSEUDO_DMA | FLAG_DMA_FIXUP;
 			break;
 		case BOARD_NCR53C400A:
-			flags = FLAG_NO_DMA_FIXUP;
 			ports = ncr_53c400a_ports;
 			magic = ncr_53c400a_magic;
 			break;
 		case BOARD_HP_C2502:
-			flags = FLAG_NO_DMA_FIXUP;
 			ports = ncr_53c400a_ports;
 			magic = hp_c2502_magic;
 			break;
 		case BOARD_DTC3181E:
-			flags = FLAG_NO_DMA_FIXUP;
 			ports = dtc_3181e_ports;
 			magic = ncr_53c400a_magic;
 			break;
diff --git a/drivers/scsi/pas16.c b/drivers/scsi/pas16.c
index 512037e27783..7589fea01186 100644
--- a/drivers/scsi/pas16.c
+++ b/drivers/scsi/pas16.c
@@ -377,7 +377,7 @@ static int __init pas16_detect(struct scsi_host_template *tpnt)
 		
 	instance->io_port = io_port;
 
-	if (NCR5380_init(instance, 0))
+	if (NCR5380_init(instance, FLAG_DMA_FIXUP))
 		goto out_unregister;
 
 	NCR5380_maybe_reset_bus(instance);
diff --git a/drivers/scsi/t128.c b/drivers/scsi/t128.c
index 4615fda60dbd..6cb8bdd2f4e6 100644
--- a/drivers/scsi/t128.c
+++ b/drivers/scsi/t128.c
@@ -210,7 +210,7 @@ found:
 	instance->base = base;
 	((struct NCR5380_hostdata *)instance->hostdata)->base = p;
 
-	if (NCR5380_init(instance, 0))
+	if (NCR5380_init(instance, FLAG_DMA_FIXUP))
 		goto out_unregister;
 
 	NCR5380_maybe_reset_bus(instance);