Merge git://bedivere.hansenpartnership.com/git/scsi-rc-fixes-2.6

* git://bedivere.hansenpartnership.com/git/scsi-rc-fixes-2.6: (25 commits)
  [SCSI] bnx2i: Fixed the endian on TTT for NOP out transmission
  [SCSI] libfc: fix referencing to fc_fcp_pkt from the frame pointer via fr_fsp()
  [SCSI] libfc: block SCSI eh thread for blocked rports
  [SCSI] libfc: fix fc_eh_host_reset
  [SCSI] fcoe: Fix deadlock between fip's recv_work and rtnl
  [SCSI] qla2xxx: Update version number to 8.03.07.07-k.
  [SCSI] qla2xxx: Set the task attributes after memsetting fcp cmnd.
  [SCSI] qla2xxx: Correct inadvertent loop state transitions during port-update handling.
  [SCSI] qla2xxx: Save and restore irq in the response queue interrupt handler.
  [SCSI] qla2xxx: Double check for command completion if abort mailbox command fails.
  [SCSI] qla2xxx: Acquire hardware lock while manipulating dsd list.
  [SCSI] qla2xxx: Fix qla24xx revision check while enabling interrupts.
  [SCSI] qla2xxx: T10 DIF - Fix incorrect error reporting.
  [SCSI] qla2xxx: T10 DIF - Handle uninitalized sectors.
  [SCSI] hpsa: fix physical device lun and target numbering problem
  [SCSI] hpsa: fix problem that OBDR devices are not detected
  [SCSI] isci: add version number
  [SCSI] isci: fix event-get pointer increment
  [SCSI] isci: dynamic interrupt coalescing
  [SCSI] isci: Leave requests alone if already terminating.
  ...

28 files changed, 631 insertions, 200 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-scsi_host b/Documentation/ABI/testing/sysfs-class-scsi_host
new file mode 100644
index 000000000000..29a4f892e433
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-scsi_host
@@ -0,0 +1,13 @@
+What:		/sys/class/scsi_host/hostX/isci_id
+Date:		June 2011
+Contact:	Dave Jiang <dave.jiang@intel.com>
+Description:
+		This file contains the enumerated host ID for the Intel
+		SCU controller. The Intel(R) C600 Series Chipset SATA/SAS
+		Storage Control Unit embeds up to two 4-port controllers in
+		a single PCI device.  The controllers are enumerated in order
+		which usually means the lowest number scsi_host corresponds
+		with the first controller, but this association is not
+		guaranteed.  The 'isci_id' attribute unambiguously identifies
+		the controller index: '0' for the first controller,
+		'1' for the second.
diff --git a/MAINTAINERS b/MAINTAINERS
index 28f65c249b97..7336c15abd43 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3262,6 +3262,17 @@ F:	Documentation/input/multi-touch-protocol.txt
 F:	drivers/input/input-mt.c
 K:	\b(ABS|SYN)_MT_
 
+INTEL C600 SERIES SAS CONTROLLER DRIVER
+M:	Intel SCU Linux support <intel-linux-scu@intel.com>
+M:	Dan Williams <dan.j.williams@intel.com>
+M:	Dave Jiang <dave.jiang@intel.com>
+M:	Ed Nadolski <edmund.nadolski@intel.com>
+L:	linux-scsi@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git
+S:	Maintained
+F:	drivers/scsi/isci/
+F:	firmware/isci/
+
 INTEL IDLE DRIVER
 M:	Len Brown <lenb@kernel.org>
 L:	linux-pm@lists.linux-foundation.org
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index 9ae80cd5953b..dba72a4e6a1c 100644
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -563,7 +563,7 @@ int bnx2i_send_iscsi_nopout(struct bnx2i_conn *bnx2i_conn,
 	nopout_wqe->itt = ((u16)task->itt |
 			   (ISCSI_TASK_TYPE_MPATH <<
 			    ISCSI_TMF_REQUEST_TYPE_SHIFT));
-	nopout_wqe->ttt = nopout_hdr->ttt;
+	nopout_wqe->ttt = be32_to_cpu(nopout_hdr->ttt);
 	nopout_wqe->flags = 0;
 	if (!unsol)
 		nopout_wqe->flags = ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION;
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index ba710e350ac5..5d0e9a24ae94 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -432,6 +432,8 @@ void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
 	u8 flogi_maddr[ETH_ALEN];
 	const struct net_device_ops *ops;
 
+	rtnl_lock();
+
 	/*
 	 * Don't listen for Ethernet packets anymore.
 	 * synchronize_net() ensures that the packet handlers are not running
@@ -461,6 +463,8 @@ void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
 					" specific feature for LLD.\n");
 	}
 
+	rtnl_unlock();
+
 	/* Release the self-reference taken during fcoe_interface_create() */
 	fcoe_interface_put(fcoe);
 }
@@ -1951,11 +1955,8 @@ static void fcoe_destroy_work(struct work_struct *work)
 	fcoe_if_destroy(port->lport);
 
 	/* Do not tear down the fcoe interface for NPIV port */
-	if (!npiv) {
-		rtnl_lock();
+	if (!npiv)
 		fcoe_interface_cleanup(fcoe);
-		rtnl_unlock();
-	}
 
 	mutex_unlock(&fcoe_config_mutex);
 }
@@ -2009,8 +2010,9 @@ static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode)
 		printk(KERN_ERR "fcoe: Failed to create interface (%s)\n",
 		       netdev->name);
 		rc = -EIO;
+		rtnl_unlock();
 		fcoe_interface_cleanup(fcoe);
-		goto out_nodev;
+		goto out_nortnl;
 	}
 
 	/* Make this the "master" N_Port */
@@ -2027,6 +2029,7 @@ static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode)
 
 out_nodev:
 	rtnl_unlock();
+out_nortnl:
 	mutex_unlock(&fcoe_config_mutex);
 	return rc;
 }
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index ec61bdb833ac..b200b736b000 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -676,6 +676,16 @@ static void hpsa_scsi_replace_entry(struct ctlr_info *h, int hostno,
 	BUG_ON(entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA);
 	removed[*nremoved] = h->dev[entry];
 	(*nremoved)++;
+
+	/*
+	 * New physical devices won't have target/lun assigned yet
+	 * so we need to preserve the values in the slot we are replacing.
+	 */
+	if (new_entry->target == -1) {
+		new_entry->target = h->dev[entry]->target;
+		new_entry->lun = h->dev[entry]->lun;
+	}
+
 	h->dev[entry] = new_entry;
 	added[*nadded] = new_entry;
 	(*nadded)++;
@@ -1548,10 +1558,17 @@ static inline void hpsa_set_bus_target_lun(struct hpsa_scsi_dev_t *device,
 }
 
 static int hpsa_update_device_info(struct ctlr_info *h,
-	unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device)
+	unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device,
+	unsigned char *is_OBDR_device)
 {
-#define OBDR_TAPE_INQ_SIZE 49
+
+#define OBDR_SIG_OFFSET 43
+#define OBDR_TAPE_SIG "$DR-10"
+#define OBDR_SIG_LEN (sizeof(OBDR_TAPE_SIG) - 1)
+#define OBDR_TAPE_INQ_SIZE (OBDR_SIG_OFFSET + OBDR_SIG_LEN)
+
 	unsigned char *inq_buff;
+	unsigned char *obdr_sig;
 
 	inq_buff = kzalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
 	if (!inq_buff)
@@ -1583,6 +1600,16 @@ static int hpsa_update_device_info(struct ctlr_info *h,
 	else
 		this_device->raid_level = RAID_UNKNOWN;
 
+	if (is_OBDR_device) {
+		/* See if this is a One-Button-Disaster-Recovery device
+		 * by looking for "$DR-10" at offset 43 in inquiry data.
+		 */
+		obdr_sig = &inq_buff[OBDR_SIG_OFFSET];
+		*is_OBDR_device = (this_device->devtype == TYPE_ROM &&
+					strncmp(obdr_sig, OBDR_TAPE_SIG,
+						OBDR_SIG_LEN) == 0);
+	}
+
 	kfree(inq_buff);
 	return 0;
 
@@ -1716,7 +1743,7 @@ static int add_msa2xxx_enclosure_device(struct ctlr_info *h,
 		return 0;
 	}
 
-	if (hpsa_update_device_info(h, scsi3addr, this_device))
+	if (hpsa_update_device_info(h, scsi3addr, this_device, NULL))
 		return 0;
 	(*nmsa2xxx_enclosures)++;
 	hpsa_set_bus_target_lun(this_device, bus, target, 0);
@@ -1808,7 +1835,6 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 	 */
 	struct ReportLUNdata *physdev_list = NULL;
 	struct ReportLUNdata *logdev_list = NULL;
-	unsigned char *inq_buff = NULL;
 	u32 nphysicals = 0;
 	u32 nlogicals = 0;
 	u32 ndev_allocated = 0;
@@ -1824,11 +1850,9 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 		GFP_KERNEL);
 	physdev_list = kzalloc(reportlunsize, GFP_KERNEL);
 	logdev_list = kzalloc(reportlunsize, GFP_KERNEL);
-	inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
 	tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL);
 
-	if (!currentsd || !physdev_list || !logdev_list ||
-		!inq_buff || !tmpdevice) {
+	if (!currentsd || !physdev_list || !logdev_list || !tmpdevice) {
 		dev_err(&h->pdev->dev, "out of memory\n");
 		goto out;
 	}
@@ -1863,7 +1887,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 	/* adjust our table of devices */
 	nmsa2xxx_enclosures = 0;
 	for (i = 0; i < nphysicals + nlogicals + 1; i++) {
-		u8 *lunaddrbytes;
+		u8 *lunaddrbytes, is_OBDR = 0;
 
 		/* Figure out where the LUN ID info is coming from */
 		lunaddrbytes = figure_lunaddrbytes(h, raid_ctlr_position,
@@ -1874,7 +1898,8 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 			continue;
 
 		/* Get device type, vendor, model, device id */
-		if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice))
+		if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice,
+							&is_OBDR))
 			continue; /* skip it if we can't talk to it. */
 		figure_bus_target_lun(h, lunaddrbytes, &bus, &target, &lun,
 			tmpdevice);
@@ -1898,7 +1923,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 		hpsa_set_bus_target_lun(this_device, bus, target, lun);
 
 		switch (this_device->devtype) {
-		case TYPE_ROM: {
+		case TYPE_ROM:
 			/* We don't *really* support actual CD-ROM devices,
 			 * just "One Button Disaster Recovery" tape drive
 			 * which temporarily pretends to be a CD-ROM drive.
@@ -1906,15 +1931,8 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 			 * device by checking for "$DR-10" in bytes 43-48 of
 			 * the inquiry data.
 			 */
-				char obdr_sig[7];
-#define OBDR_TAPE_SIG "$DR-10"
-				strncpy(obdr_sig, &inq_buff[43], 6);
-				obdr_sig[6] = '\0';
-				if (strncmp(obdr_sig, OBDR_TAPE_SIG, 6) != 0)
-					/* Not OBDR device, ignore it. */
-					break;
-			}
-			ncurrent++;
+			if (is_OBDR)
+				ncurrent++;
 			break;
 		case TYPE_DISK:
 			if (i < nphysicals)
@@ -1947,7 +1965,6 @@ out:
 	for (i = 0; i < ndev_allocated; i++)
 		kfree(currentsd[i]);
 	kfree(currentsd);
-	kfree(inq_buff);
 	kfree(physdev_list);
 	kfree(logdev_list);
 }
diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index 26072f1e9852..6981b773a88d 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -531,6 +531,9 @@ static void sci_controller_process_completions(struct isci_host *ihost)
 			break;
 
 		case SCU_COMPLETION_TYPE_EVENT:
+			sci_controller_event_completion(ihost, ent);
+			break;
+
 		case SCU_COMPLETION_TYPE_NOTIFY: {
 			event_cycle ^= ((event_get+1) & SCU_MAX_EVENTS) <<
 				       (SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_SHIFT - SCU_MAX_EVENTS_SHIFT);
@@ -1091,6 +1094,7 @@ static void isci_host_completion_routine(unsigned long data)
 	struct isci_request *request;
 	struct isci_request *next_request;
 	struct sas_task     *task;
+	u16 active;
 
 	INIT_LIST_HEAD(&completed_request_list);
 	INIT_LIST_HEAD(&errored_request_list);
@@ -1181,6 +1185,13 @@ static void isci_host_completion_routine(unsigned long data)
 		}
 	}
 
+	/* the coalesence timeout doubles at each encoding step, so
+	 * update it based on the ilog2 value of the outstanding requests
+	 */
+	active = isci_tci_active(ihost);
+	writel(SMU_ICC_GEN_VAL(NUMBER, active) |
+	       SMU_ICC_GEN_VAL(TIMER, ISCI_COALESCE_BASE + ilog2(active)),
+	       &ihost->smu_registers->interrupt_coalesce_control);
 }
 
 /**
@@ -1471,7 +1482,7 @@ static void sci_controller_ready_state_enter(struct sci_base_state_machine *sm)
 	struct isci_host *ihost = container_of(sm, typeof(*ihost), sm);
 
 	/* set the default interrupt coalescence number and timeout value. */
-	sci_controller_set_interrupt_coalescence(ihost, 0x10, 250);
+	sci_controller_set_interrupt_coalescence(ihost, 0, 0);
 }
 
 static void sci_controller_ready_state_exit(struct sci_base_state_machine *sm)
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 062101a39f79..9f33831a2f04 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -369,6 +369,9 @@ static inline struct isci_host *dev_to_ihost(struct domain_device *dev)
 #define ISCI_TAG_SEQ(tag) (((tag) >> 12) & (SCI_MAX_SEQ-1))
 #define ISCI_TAG_TCI(tag) ((tag) & (SCI_MAX_IO_REQUESTS-1))
 
+/* interrupt coalescing baseline: 9 == 3 to 5us interrupt delay per command */
+#define ISCI_COALESCE_BASE 9
+
 /* expander attached sata devices require 3 rnc slots */
 static inline int sci_remote_device_node_count(struct isci_remote_device *idev)
 {
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index 61e0d09e2b57..29aa34efb0f5 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -59,10 +59,19 @@
 #include <linux/firmware.h>
 #include <linux/efi.h>
 #include <asm/string.h>
+#include <scsi/scsi_host.h>
 #include "isci.h"
 #include "task.h"
 #include "probe_roms.h"
 
+#define MAJ 1
+#define MIN 0
+#define BUILD 0
+#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
+	__stringify(BUILD)
+
+MODULE_VERSION(DRV_VERSION);
+
 static struct scsi_transport_template *isci_transport_template;
 
 static DEFINE_PCI_DEVICE_TABLE(isci_id_table) = {
@@ -113,6 +122,22 @@ unsigned char max_concurr_spinup = 1;
 module_param(max_concurr_spinup, byte, 0);
 MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup");
 
+static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev);
+	struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+	struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id);
+}
+
+static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL);
+
+struct device_attribute *isci_host_attrs[] = {
+	&dev_attr_isci_id,
+	NULL
+};
+
 static struct scsi_host_template isci_sht = {
 
 	.module				= THIS_MODULE,
@@ -138,6 +163,7 @@ static struct scsi_host_template isci_sht = {
 	.slave_alloc			= sas_slave_alloc,
 	.target_destroy			= sas_target_destroy,
 	.ioctl				= sas_ioctl,
+	.shost_attrs			= isci_host_attrs,
 };
 
 static struct sas_domain_function_template isci_transport_ops  = {
@@ -232,17 +258,6 @@ static int isci_register_sas_ha(struct isci_host *isci_host)
 	return 0;
 }
 
-static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev);
-	struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
-	struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha);
-
-	return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id);
-}
-
-static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL);
-
 static void isci_unregister(struct isci_host *isci_host)
 {
 	struct Scsi_Host *shost;
@@ -251,7 +266,6 @@ static void isci_unregister(struct isci_host *isci_host)
 		return;
 
 	shost = isci_host->shost;
-	device_remove_file(&shost->shost_dev, &dev_attr_isci_id);
 
 	sas_unregister_ha(&isci_host->sas_ha);
 
@@ -415,14 +429,8 @@ static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id)
 	if (err)
 		goto err_shost_remove;
 
-	err = device_create_file(&shost->shost_dev, &dev_attr_isci_id);
-	if (err)
-		goto err_unregister_ha;
-
 	return isci_host;
 
- err_unregister_ha:
-	sas_unregister_ha(&(isci_host->sas_ha));
  err_shost_remove:
 	scsi_remove_host(shost);
  err_shost:
@@ -540,7 +548,8 @@ static __init int isci_init(void)
 {
 	int err;
 
-	pr_info("%s: Intel(R) C600 SAS Controller Driver\n", DRV_NAME);
+	pr_info("%s: Intel(R) C600 SAS Controller Driver - version %s\n",
+		DRV_NAME, DRV_VERSION);
 
 	isci_transport_template = sas_domain_attach_transport(&isci_transport_ops);
 	if (!isci_transport_template)
diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c
index 79313a7a2356..430fc8ff014a 100644
--- a/drivers/scsi/isci/phy.c
+++ b/drivers/scsi/isci/phy.c
@@ -104,6 +104,7 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy,
 	u32 parity_count = 0;
 	u32 llctl, link_rate;
 	u32 clksm_value = 0;
+	u32 sp_timeouts = 0;
 
 	iphy->link_layer_registers = reg;
 
@@ -211,6 +212,18 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy,
 	llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate);
 	writel(llctl, &iphy->link_layer_registers->link_layer_control);
 
+	sp_timeouts = readl(&iphy->link_layer_registers->sas_phy_timeouts);
+
+	/* Clear the default 0x36 (54us) RATE_CHANGE timeout value. */
+	sp_timeouts &= ~SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0xFF);
+
+	/* Set RATE_CHANGE timeout value to 0x3B (59us).  This ensures SCU can
+	 * lock with 3Gb drive when SCU max rate is set to 1.5Gb.
+	 */
+	sp_timeouts |= SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0x3B);
+
+	writel(sp_timeouts, &iphy->link_layer_registers->sas_phy_timeouts);
+
 	if (is_a2(ihost->pdev)) {
 		/* Program the max ARB time for the PHY to 700us so we inter-operate with
 		 * the PMC expander which shuts down PHYs if the expander PHY generates too
diff --git a/drivers/scsi/isci/registers.h b/drivers/scsi/isci/registers.h
index 9b266c7428e8..00afc738bbed 100644
--- a/drivers/scsi/isci/registers.h
+++ b/drivers/scsi/isci/registers.h
@@ -1299,6 +1299,18 @@ struct scu_transport_layer_registers {
 #define SCU_AFE_XCVRCR_OFFSET       0x00DC
 #define SCU_AFE_LUTCR_OFFSET        0x00E0
 
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_ALIGN_DETECTION_SHIFT          (0UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_ALIGN_DETECTION_MASK           (0x000000FFUL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_HOT_PLUG_SHIFT                 (8UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_HOT_PLUG_MASK                  (0x0000FF00UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_COMSAS_DETECTION_SHIFT         (16UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_COMSAS_DETECTION_MASK          (0x00FF0000UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_RATE_CHANGE_SHIFT              (24UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_RATE_CHANGE_MASK               (0xFF000000UL)
+
+#define SCU_SAS_PHYTOV_GEN_VAL(name, value) \
+	SCU_GEN_VALUE(SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_##name, value)
+
 #define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_SHIFT                  (0)
 #define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_MASK                   (0x00000003)
 #define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1                   (0)
diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
index a46e07ac789f..b5d3a8c4d329 100644
--- a/drivers/scsi/isci/request.c
+++ b/drivers/scsi/isci/request.c
@@ -732,12 +732,20 @@ sci_io_request_terminate(struct isci_request *ireq)
 		sci_change_state(&ireq->sm, SCI_REQ_ABORTING);
 		return SCI_SUCCESS;
 	case SCI_REQ_TASK_WAIT_TC_RESP:
+		/* The task frame was already confirmed to have been
+		 * sent by the SCU HW.  Since the state machine is
+		 * now only waiting for the task response itself,
+		 * abort the request and complete it immediately
+		 * and don't wait for the task response.
+		 */
 		sci_change_state(&ireq->sm, SCI_REQ_ABORTING);
 		sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
 		return SCI_SUCCESS;
 	case SCI_REQ_ABORTING:
-		sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
-		return SCI_SUCCESS;
+		/* If a request has a termination requested twice, return
+		 * a failure indication, since HW confirmation of the first
+		 * abort is still outstanding.
+		 */
 	case SCI_REQ_COMPLETED:
 	default:
 		dev_warn(&ireq->owning_controller->pdev->dev,
@@ -2399,22 +2407,19 @@ static void isci_task_save_for_upper_layer_completion(
 	}
 }
 
-static void isci_request_process_stp_response(struct sas_task *task,
-					      void *response_buffer)
+static void isci_process_stp_response(struct sas_task *task, struct dev_to_host_fis *fis)
 {
-	struct dev_to_host_fis *d2h_reg_fis = response_buffer;
 	struct task_status_struct *ts = &task->task_status;
 	struct ata_task_resp *resp = (void *)&ts->buf[0];
 
-	resp->frame_len = le16_to_cpu(*(__le16 *)(response_buffer + 6));
-	memcpy(&resp->ending_fis[0], response_buffer + 16, 24);
+	resp->frame_len = sizeof(*fis);
+	memcpy(resp->ending_fis, fis, sizeof(*fis));
 	ts->buf_valid_size = sizeof(*resp);
 
-	/**
-	 * If the device fault bit is set in the status register, then
+	/* If the device fault bit is set in the status register, then
 	 * set the sense data and return.
 	 */
-	if (d2h_reg_fis->status & ATA_DF)
+	if (fis->status & ATA_DF)
 		ts->stat = SAS_PROTO_RESPONSE;
 	else
 		ts->stat = SAM_STAT_GOOD;
@@ -2428,7 +2433,6 @@ static void isci_request_io_request_complete(struct isci_host *ihost,
 {
 	struct sas_task *task = isci_request_access_task(request);
 	struct ssp_response_iu *resp_iu;
-	void *resp_buf;
 	unsigned long task_flags;
 	struct isci_remote_device *idev = isci_lookup_device(task->dev);
 	enum service_response response       = SAS_TASK_UNDELIVERED;
@@ -2565,9 +2569,7 @@ static void isci_request_io_request_complete(struct isci_host *ihost,
 				task);
 
 			if (sas_protocol_ata(task->task_proto)) {
-				resp_buf = &request->stp.rsp;
-				isci_request_process_stp_response(task,
-								  resp_buf);
+				isci_process_stp_response(task, &request->stp.rsp);
 			} else if (SAS_PROTOCOL_SSP == task->task_proto) {
 
 				/* crack the iu response buffer. */
diff --git a/drivers/scsi/isci/unsolicited_frame_control.c b/drivers/scsi/isci/unsolicited_frame_control.c
index e9e1e2abacb9..16f88ab939c8 100644
--- a/drivers/scsi/isci/unsolicited_frame_control.c
+++ b/drivers/scsi/isci/unsolicited_frame_control.c
@@ -72,7 +72,7 @@ int sci_unsolicited_frame_control_construct(struct isci_host *ihost)
 	 */
 	buf_len = SCU_MAX_UNSOLICITED_FRAMES * SCU_UNSOLICITED_FRAME_BUFFER_SIZE;
 	header_len = SCU_MAX_UNSOLICITED_FRAMES * sizeof(struct scu_unsolicited_frame_header);
-	size = buf_len + header_len + SCU_MAX_UNSOLICITED_FRAMES * sizeof(dma_addr_t);
+	size = buf_len + header_len + SCU_MAX_UNSOLICITED_FRAMES * sizeof(uf_control->address_table.array[0]);
 
 	/*
 	 * The Unsolicited Frame buffers are set at the start of the UF
diff --git a/drivers/scsi/isci/unsolicited_frame_control.h b/drivers/scsi/isci/unsolicited_frame_control.h
index 31cb9506f52d..75d896686f5a 100644
--- a/drivers/scsi/isci/unsolicited_frame_control.h
+++ b/drivers/scsi/isci/unsolicited_frame_control.h
@@ -214,7 +214,7 @@ struct sci_uf_address_table_array {
 	 * starting address of the UF address table.
 	 * 64-bit pointers are required by the hardware.
 	 */
-	dma_addr_t *array;
+	u64 *array;
 
 	/**
 	 * This field specifies the physical address location for the UF
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 01ff082dc34c..d261e982a2fa 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -494,6 +494,9 @@ static int fc_seq_send(struct fc_lport *lport, struct fc_seq *sp,
 	 */
 	error = lport->tt.frame_send(lport, fp);
 
+	if (fh->fh_type == FC_TYPE_BLS)
+		return error;
+
 	/*
 	 * Update the exchange and sequence flags,
 	 * assuming all frames for the sequence have been sent.
@@ -575,42 +578,35 @@ static void fc_seq_set_resp(struct fc_seq *sp,
 }
 
 /**
- * fc_seq_exch_abort() - Abort an exchange and sequence
- * @req_sp:	The sequence to be aborted
+ * fc_exch_abort_locked() - Abort an exchange
+ * @ep:	The exchange to be aborted
  * @timer_msec: The period of time to wait before aborting
  *
- * Generally called because of a timeout or an abort from the upper layer.
+ * Locking notes:  Called with exch lock held
+ *
+ * Return value: 0 on success else error code
  */
-static int fc_seq_exch_abort(const struct fc_seq *req_sp,
-			     unsigned int timer_msec)
+static int fc_exch_abort_locked(struct fc_exch *ep,
+				unsigned int timer_msec)
 {
 	struct fc_seq *sp;
-	struct fc_exch *ep;
 	struct fc_frame *fp;
 	int error;
 
-	ep = fc_seq_exch(req_sp);
-
-	spin_lock_bh(&ep->ex_lock);
 	if (ep->esb_stat & (ESB_ST_COMPLETE | ESB_ST_ABNORMAL) ||
-	    ep->state & (FC_EX_DONE | FC_EX_RST_CLEANUP)) {
-		spin_unlock_bh(&ep->ex_lock);
+	    ep->state & (FC_EX_DONE | FC_EX_RST_CLEANUP))
 		return -ENXIO;
-	}
 
 	/*
 	 * Send the abort on a new sequence if possible.
 	 */
 	sp = fc_seq_start_next_locked(&ep->seq);
-	if (!sp) {
-		spin_unlock_bh(&ep->ex_lock);
+	if (!sp)
 		return -ENOMEM;
-	}
 
 	ep->esb_stat |= ESB_ST_SEQ_INIT | ESB_ST_ABNORMAL;
 	if (timer_msec)
 		fc_exch_timer_set_locked(ep, timer_msec);
-	spin_unlock_bh(&ep->ex_lock);
 
 	/*
 	 * If not logged into the fabric, don't send ABTS but leave
@@ -633,6 +629,28 @@ static int fc_seq_exch_abort(const struct fc_seq *req_sp,
 }
 
 /**
+ * fc_seq_exch_abort() - Abort an exchange and sequence
+ * @req_sp:	The sequence to be aborted
+ * @timer_msec: The period of time to wait before aborting
+ *
+ * Generally called because of a timeout or an abort from the upper layer.
+ *
+ * Return value: 0 on success else error code
+ */
+static int fc_seq_exch_abort(const struct fc_seq *req_sp,
+			     unsigned int timer_msec)
+{
+	struct fc_exch *ep;
+	int error;
+
+	ep = fc_seq_exch(req_sp);
+	spin_lock_bh(&ep->ex_lock);
+	error = fc_exch_abort_locked(ep, timer_msec);
+	spin_unlock_bh(&ep->ex_lock);
+	return error;
+}
+
+/**
  * fc_exch_timeout() - Handle exchange timer expiration
  * @work: The work_struct identifying the exchange that timed out
  */
@@ -1715,6 +1733,7 @@ static void fc_exch_reset(struct fc_exch *ep)
 	int rc = 1;
 
 	spin_lock_bh(&ep->ex_lock);
+	fc_exch_abort_locked(ep, 0);
 	ep->state |= FC_EX_RST_CLEANUP;
 	if (cancel_delayed_work(&ep->timeout_work))
 		atomic_dec(&ep->ex_refcnt);	/* drop hold for timer */
@@ -1962,6 +1981,7 @@ static struct fc_seq *fc_exch_seq_send(struct fc_lport *lport,
 	struct fc_exch *ep;
 	struct fc_seq *sp = NULL;
 	struct fc_frame_header *fh;
+	struct fc_fcp_pkt *fsp = NULL;
 	int rc = 1;
 
 	ep = fc_exch_alloc(lport, fp);
@@ -1984,8 +2004,10 @@ static struct fc_seq *fc_exch_seq_send(struct fc_lport *lport,
 	fc_exch_setup_hdr(ep, fp, ep->f_ctl);
 	sp->cnt++;
 
-	if (ep->xid <= lport->lro_xid && fh->fh_r_ctl == FC_RCTL_DD_UNSOL_CMD)
+	if (ep->xid <= lport->lro_xid && fh->fh_r_ctl == FC_RCTL_DD_UNSOL_CMD) {
+		fsp = fr_fsp(fp);
 		fc_fcp_ddp_setup(fr_fsp(fp), ep->xid);
+	}
 
 	if (unlikely(lport->tt.frame_send(lport, fp)))
 		goto err;
@@ -1999,7 +2021,8 @@ static struct fc_seq *fc_exch_seq_send(struct fc_lport *lport,
 	spin_unlock_bh(&ep->ex_lock);
 	return sp;
 err:
-	fc_fcp_ddp_done(fr_fsp(fp));
+	if (fsp)
+		fc_fcp_ddp_done(fsp);
 	rc = fc_exch_done_locked(ep);
 	spin_unlock_bh(&ep->ex_lock);
 	if (!rc)
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index afb63c843144..4c41ee816f0b 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -2019,6 +2019,11 @@ int fc_eh_abort(struct scsi_cmnd *sc_cmd)
 	struct fc_fcp_internal *si;
 	int rc = FAILED;
 	unsigned long flags;
+	int rval;
+
+	rval = fc_block_scsi_eh(sc_cmd);
+	if (rval)
+		return rval;
 
 	lport = shost_priv(sc_cmd->device->host);
 	if (lport->state != LPORT_ST_READY)
@@ -2068,9 +2073,9 @@ int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
 	int rc = FAILED;
 	int rval;
 
-	rval = fc_remote_port_chkready(rport);
+	rval = fc_block_scsi_eh(sc_cmd);
 	if (rval)
-		goto out;
+		return rval;
 
 	lport = shost_priv(sc_cmd->device->host);
 
@@ -2116,6 +2121,8 @@ int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
 
 	FC_SCSI_DBG(lport, "Resetting host\n");
 
+	fc_block_scsi_eh(sc_cmd);
+
 	lport->tt.lport_reset(lport);
 	wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
 	while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index e55ed9cf23fb..628f347404f9 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -88,6 +88,7 @@
  */
 
 #include <linux/timer.h>
+#include <linux/delay.h>
 #include <linux/slab.h>
 #include <asm/unaligned.h>
 
@@ -1029,8 +1030,16 @@ static void fc_lport_enter_reset(struct fc_lport *lport)
 			   FCH_EVT_LIPRESET, 0);
 	fc_vports_linkchange(lport);
 	fc_lport_reset_locked(lport);
-	if (lport->link_up)
+	if (lport->link_up) {
+		/*
+		 * Wait upto resource allocation time out before
+		 * doing re-login since incomplete FIP exchanged
+		 * from last session may collide with exchanges
+		 * in new session.
+		 */
+		msleep(lport->r_a_tov);
 		fc_lport_enter_flogi(lport);
+	}
 }
 
 /**
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 7836eb01c7fc..a31e05f3bfd4 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1786,13 +1786,16 @@ qla24xx_vport_create(struct fc_vport *fc_vport, bool disable)
 			fc_vport_set_state(fc_vport, FC_VPORT_LINKDOWN);
 	}
 
-	if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) {
+	if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) {
 		if (ha->fw_attributes & BIT_4) {
+			int prot = 0;
 			vha->flags.difdix_supported = 1;
 			ql_dbg(ql_dbg_user, vha, 0x7082,
 			    "Registered for DIF/DIX type 1 and 3 protection.\n");
+			if (ql2xenabledif == 1)
+				prot = SHOST_DIX_TYPE0_PROTECTION;
 			scsi_host_set_prot(vha->host,
-			    SHOST_DIF_TYPE1_PROTECTION
+			    prot | SHOST_DIF_TYPE1_PROTECTION
 			    | SHOST_DIF_TYPE2_PROTECTION
 			    | SHOST_DIF_TYPE3_PROTECTION
 			    | SHOST_DIX_TYPE1_PROTECTION
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 2155071f3100..d79cd8a5f831 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -8,24 +8,24 @@
 /*
  * Table for showing the current message id in use for particular level
  * Change this table for addition of log/debug messages.
- * -----------------------------------------------------
- * |             Level            |   Last Value Used  |
- * -----------------------------------------------------
- * | Module Init and Probe        |       0x0116       |
- * | Mailbox commands             |       0x111e       |
- * | Device Discovery             |       0x2083       |
- * | Queue Command and IO tracing |       0x302e       |
- * | DPC Thread                   |       0x401c       |
- * | Async Events                 |       0x5059       |
- * | Timer Routines               |       0x600d       |
- * | User Space Interactions      |       0x709c       |
- * | Task Management              |       0x8043       |
- * | AER/EEH                      |       0x900f       |
- * | Virtual Port                 |       0xa007       |
- * | ISP82XX Specific             |       0xb027       |
- * | MultiQ                       |       0xc00b       |
- * | Misc                         |       0xd00b       |
- * -----------------------------------------------------
+ * ----------------------------------------------------------------------
+ * |             Level            |   Last Value Used  |     Holes	|
+ * ----------------------------------------------------------------------
+ * | Module Init and Probe        |       0x0116       |  		|
+ * | Mailbox commands             |       0x1126       |		|
+ * | Device Discovery             |       0x2083       |		|
+ * | Queue Command and IO tracing |       0x302e       |     0x3008     |
+ * | DPC Thread                   |       0x401c       |		|
+ * | Async Events                 |       0x5059       |		|
+ * | Timer Routines               |       0x600d       |		|
+ * | User Space Interactions      |       0x709d       |		|
+ * | Task Management              |       0x8041       |    		|
+ * | AER/EEH                      |       0x900f       |		|
+ * | Virtual Port                 |       0xa007       |		|
+ * | ISP82XX Specific             |       0xb04f       |    		|
+ * | MultiQ                       |       0xc00b       |		|
+ * | Misc                         |       0xd00b       |		|
+ * ----------------------------------------------------------------------
  */
 
 #include "qla_def.h"
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index cc5a79259d33..a03eaf40f377 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2529,6 +2529,7 @@ struct qla_hw_data {
 #define DT_ISP8021			BIT_14
 #define DT_ISP_LAST			(DT_ISP8021 << 1)
 
+#define DT_T10_PI                       BIT_25
 #define DT_IIDMA                        BIT_26
 #define DT_FWI2                         BIT_27
 #define DT_ZIO_SUPPORTED                BIT_28
@@ -2572,6 +2573,7 @@ struct qla_hw_data {
 #define IS_NOCACHE_VPD_TYPE(ha)	(IS_QLA81XX(ha))
 #define IS_ALOGIO_CAPABLE(ha)	(IS_QLA23XX(ha) || IS_FWI2_CAPABLE(ha))
 
+#define IS_T10_PI_CAPABLE(ha)   ((ha)->device_type & DT_T10_PI)
 #define IS_IIDMA_CAPABLE(ha)    ((ha)->device_type & DT_IIDMA)
 #define IS_FWI2_CAPABLE(ha)     ((ha)->device_type & DT_FWI2)
 #define IS_ZIO_SUPPORTED(ha)    ((ha)->device_type & DT_ZIO_SUPPORTED)
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 691783abfb69..aa69486dc064 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -537,6 +537,11 @@ struct sts_entry_24xx {
 	/*
 	 * If DIF Error is set in comp_status, these additional fields are
 	 * defined:
+	 *
+	 * !!! NOTE: Firmware sends expected/actual DIF data in big endian
+	 * format; but all of the "data" field gets swab32-d in the beginning
+	 * of qla2x00_status_entry().
+	 *
 	 * &data[10] : uint8_t report_runt_bg[2];	- computed guard
 	 * &data[12] : uint8_t actual_dif[8];		- DIF Data received
 	 * &data[20] : uint8_t expected_dif[8];		- DIF Data computed
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index def694271bf7..37da04d3db26 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3838,15 +3838,12 @@ qla2x00_loop_resync(scsi_qla_host_t *vha)
 		req = vha->req;
 	rsp = req->rsp;
 
-	atomic_set(&vha->loop_state, LOOP_UPDATE);
 	clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
 	if (vha->flags.online) {
 		if (!(rval = qla2x00_fw_ready(vha))) {
 			/* Wait at most MAX_TARGET RSCNs for a stable link. */
 			wait_time = 256;
 			do {
-				atomic_set(&vha->loop_state, LOOP_UPDATE);
-
 				/* Issue a marker after FW becomes ready. */
 				qla2x00_marker(vha, req, rsp, 0, 0,
 					MK_SYNC_ALL);
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
index d2e904bc21c0..9902834e0b74 100644
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -102,3 +102,32 @@ qla2x00_set_fcport_state(fc_port_t *fcport, int state)
 		    fcport->d_id.b.al_pa);
 	}
 }
+
+static inline int
+qla2x00_hba_err_chk_enabled(srb_t *sp)
+{
+	/*
+	 * Uncomment when corresponding SCSI changes are done.
+	 *
+	if (!sp->cmd->prot_chk)
+		return 0;
+	 *
+	 */
+
+	switch (scsi_get_prot_op(sp->cmd)) {
+	case SCSI_PROT_READ_STRIP:
+	case SCSI_PROT_WRITE_INSERT:
+		if (ql2xenablehba_err_chk >= 1)
+			return 1;
+		break;
+	case SCSI_PROT_READ_PASS:
+	case SCSI_PROT_WRITE_PASS:
+		if (ql2xenablehba_err_chk >= 2)
+			return 1;
+		break;
+	case SCSI_PROT_READ_INSERT:
+	case SCSI_PROT_WRITE_STRIP:
+		return 1;
+	}
+	return 0;
+}
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 49d6906af886..dbec89622a0f 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -709,20 +709,28 @@ struct fw_dif_context {
  *
  */
 static inline void
-qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt,
+qla24xx_set_t10dif_tags(srb_t *sp, struct fw_dif_context *pkt,
     unsigned int protcnt)
 {
-	struct sd_dif_tuple *spt;
+	struct scsi_cmnd *cmd = sp->cmd;
 	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
-	unsigned char op = scsi_get_prot_op(cmd);
 
 	switch (scsi_get_prot_type(cmd)) {
-	/* For TYPE 0 protection: no checking */
 	case SCSI_PROT_DIF_TYPE0:
-		pkt->ref_tag_mask[0] = 0x00;
-		pkt->ref_tag_mask[1] = 0x00;
-		pkt->ref_tag_mask[2] = 0x00;
-		pkt->ref_tag_mask[3] = 0x00;
+		/*
+		 * No check for ql2xenablehba_err_chk, as it would be an
+		 * I/O error if hba tag generation is not done.
+		 */
+		pkt->ref_tag = cpu_to_le32((uint32_t)
+		    (0xffffffff & scsi_get_lba(cmd)));
+
+		if (!qla2x00_hba_err_chk_enabled(sp))
+			break;
+
+		pkt->ref_tag_mask[0] = 0xff;
+		pkt->ref_tag_mask[1] = 0xff;
+		pkt->ref_tag_mask[2] = 0xff;
+		pkt->ref_tag_mask[3] = 0xff;
 		break;
 
 	/*
@@ -730,20 +738,16 @@ qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt,
 	 * match LBA in CDB + N
 	 */
 	case SCSI_PROT_DIF_TYPE2:
-		if (!ql2xenablehba_err_chk)
-			break;
-
-		if (scsi_prot_sg_count(cmd)) {
-			spt = page_address(sg_page(scsi_prot_sglist(cmd))) +
-			    scsi_prot_sglist(cmd)[0].offset;
-			pkt->app_tag = swab32(spt->app_tag);
-			pkt->app_tag_mask[0] =  0xff;
-			pkt->app_tag_mask[1] =  0xff;
-		}
+		pkt->app_tag = __constant_cpu_to_le16(0);
+		pkt->app_tag_mask[0] = 0x0;
+		pkt->app_tag_mask[1] = 0x0;
 
 		pkt->ref_tag = cpu_to_le32((uint32_t)
 		    (0xffffffff & scsi_get_lba(cmd)));
 
+		if (!qla2x00_hba_err_chk_enabled(sp))
+			break;
+
 		/* enable ALL bytes of the ref tag */
 		pkt->ref_tag_mask[0] = 0xff;
 		pkt->ref_tag_mask[1] = 0xff;
@@ -763,26 +767,15 @@ qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt,
 	 * 16 bit app tag.
 	 */
 	case SCSI_PROT_DIF_TYPE1:
-		if (!ql2xenablehba_err_chk)
+		pkt->ref_tag = cpu_to_le32((uint32_t)
+		    (0xffffffff & scsi_get_lba(cmd)));
+		pkt->app_tag = __constant_cpu_to_le16(0);
+		pkt->app_tag_mask[0] = 0x0;
+		pkt->app_tag_mask[1] = 0x0;
+
+		if (!qla2x00_hba_err_chk_enabled(sp))
 			break;
 
-		if (protcnt && (op == SCSI_PROT_WRITE_STRIP ||
-		    op == SCSI_PROT_WRITE_PASS)) {
-			spt = page_address(sg_page(scsi_prot_sglist(cmd))) +
-			    scsi_prot_sglist(cmd)[0].offset;
-			ql_dbg(ql_dbg_io, vha, 0x3008,
-			    "LBA from user %p, lba = 0x%x for cmd=%p.\n",
-			    spt, (int)spt->ref_tag, cmd);
-			pkt->ref_tag = swab32(spt->ref_tag);
-			pkt->app_tag_mask[0] = 0x0;
-			pkt->app_tag_mask[1] = 0x0;
-		} else {
-			pkt->ref_tag = cpu_to_le32((uint32_t)
-			    (0xffffffff & scsi_get_lba(cmd)));
-			pkt->app_tag = __constant_cpu_to_le16(0);
-			pkt->app_tag_mask[0] = 0x0;
-			pkt->app_tag_mask[1] = 0x0;
-		}
 		/* enable ALL bytes of the ref tag */
 		pkt->ref_tag_mask[0] = 0xff;
 		pkt->ref_tag_mask[1] = 0xff;
@@ -798,8 +791,162 @@ qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt,
 	    scsi_get_prot_type(cmd), cmd);
 }
 
+struct qla2_sgx {
+	dma_addr_t		dma_addr;	/* OUT */
+	uint32_t		dma_len;	/* OUT */
+
+	uint32_t		tot_bytes;	/* IN */
+	struct scatterlist	*cur_sg;	/* IN */
+
+	/* for book keeping, bzero on initial invocation */
+	uint32_t		bytes_consumed;
+	uint32_t		num_bytes;
+	uint32_t		tot_partial;
+
+	/* for debugging */
+	uint32_t		num_sg;
+	srb_t			*sp;
+};
 
 static int
+qla24xx_get_one_block_sg(uint32_t blk_sz, struct qla2_sgx *sgx,
+	uint32_t *partial)
+{
+	struct scatterlist *sg;
+	uint32_t cumulative_partial, sg_len;
+	dma_addr_t sg_dma_addr;
+
+	if (sgx->num_bytes == sgx->tot_bytes)
+		return 0;
+
+	sg = sgx->cur_sg;
+	cumulative_partial = sgx->tot_partial;
+
+	sg_dma_addr = sg_dma_address(sg);
+	sg_len = sg_dma_len(sg);
+
+	sgx->dma_addr = sg_dma_addr + sgx->bytes_consumed;
+
+	if ((cumulative_partial + (sg_len - sgx->bytes_consumed)) >= blk_sz) {
+		sgx->dma_len = (blk_sz - cumulative_partial);
+		sgx->tot_partial = 0;
+		sgx->num_bytes += blk_sz;
+		*partial = 0;
+	} else {
+		sgx->dma_len = sg_len - sgx->bytes_consumed;
+		sgx->tot_partial += sgx->dma_len;
+		*partial = 1;
+	}
+
+	sgx->bytes_consumed += sgx->dma_len;
+
+	if (sg_len == sgx->bytes_consumed) {
+		sg = sg_next(sg);
+		sgx->num_sg++;
+		sgx->cur_sg = sg;
+		sgx->bytes_consumed = 0;
+	}
+
+	return 1;
+}
+
+static int
+qla24xx_walk_and_build_sglist_no_difb(struct qla_hw_data *ha, srb_t *sp,
+	uint32_t *dsd, uint16_t tot_dsds)
+{
+	void *next_dsd;
+	uint8_t avail_dsds = 0;
+	uint32_t dsd_list_len;
+	struct dsd_dma *dsd_ptr;
+	struct scatterlist *sg_prot;
+	uint32_t *cur_dsd = dsd;
+	uint16_t	used_dsds = tot_dsds;
+
+	uint32_t	prot_int;
+	uint32_t	partial;
+	struct qla2_sgx sgx;
+	dma_addr_t	sle_dma;
+	uint32_t	sle_dma_len, tot_prot_dma_len = 0;
+	struct scsi_cmnd *cmd = sp->cmd;
+
+	prot_int = cmd->device->sector_size;
+
+	memset(&sgx, 0, sizeof(struct qla2_sgx));
+	sgx.tot_bytes = scsi_bufflen(sp->cmd);
+	sgx.cur_sg = scsi_sglist(sp->cmd);
+	sgx.sp = sp;
+
+	sg_prot = scsi_prot_sglist(sp->cmd);
+
+	while (qla24xx_get_one_block_sg(prot_int, &sgx, &partial)) {
+
+		sle_dma = sgx.dma_addr;
+		sle_dma_len = sgx.dma_len;
+alloc_and_fill:
+		/* Allocate additional continuation packets? */
+		if (avail_dsds == 0) {
+			avail_dsds = (used_dsds > QLA_DSDS_PER_IOCB) ?
+					QLA_DSDS_PER_IOCB : used_dsds;
+			dsd_list_len = (avail_dsds + 1) * 12;
+			used_dsds -= avail_dsds;
+
+			/* allocate tracking DS */
+			dsd_ptr = kzalloc(sizeof(struct dsd_dma), GFP_ATOMIC);
+			if (!dsd_ptr)
+				return 1;
+
+			/* allocate new list */
+			dsd_ptr->dsd_addr = next_dsd =
+			    dma_pool_alloc(ha->dl_dma_pool, GFP_ATOMIC,
+				&dsd_ptr->dsd_list_dma);
+
+			if (!next_dsd) {
+				/*
+				 * Need to cleanup only this dsd_ptr, rest
+				 * will be done by sp_free_dma()
+				 */
+				kfree(dsd_ptr);
+				return 1;
+			}
+
+			list_add_tail(&dsd_ptr->list,
+			    &((struct crc_context *)sp->ctx)->dsd_list);
+
+			sp->flags |= SRB_CRC_CTX_DSD_VALID;
+
+			/* add new list to cmd iocb or last list */
+			*cur_dsd++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma));
+			*cur_dsd++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma));
+			*cur_dsd++ = dsd_list_len;
+			cur_dsd = (uint32_t *)next_dsd;
+		}
+		*cur_dsd++ = cpu_to_le32(LSD(sle_dma));
+		*cur_dsd++ = cpu_to_le32(MSD(sle_dma));
+		*cur_dsd++ = cpu_to_le32(sle_dma_len);
+		avail_dsds--;
+
+		if (partial == 0) {
+			/* Got a full protection interval */
+			sle_dma = sg_dma_address(sg_prot) + tot_prot_dma_len;
+			sle_dma_len = 8;
+
+			tot_prot_dma_len += sle_dma_len;
+			if (tot_prot_dma_len == sg_dma_len(sg_prot)) {
+				tot_prot_dma_len = 0;
+				sg_prot = sg_next(sg_prot);
+			}
+
+			partial = 1; /* So as to not re-enter this block */
+			goto alloc_and_fill;
+		}
+	}
+	/* Null termination */
+	*cur_dsd++ = 0;
+	*cur_dsd++ = 0;
+	*cur_dsd++ = 0;
+	return 0;
+}
+static int
 qla24xx_walk_and_build_sglist(struct qla_hw_data *ha, srb_t *sp, uint32_t *dsd,
 	uint16_t tot_dsds)
 {
@@ -981,7 +1128,7 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
 	struct scsi_cmnd	*cmd;
 	struct scatterlist	*cur_seg;
 	int			sgc;
-	uint32_t		total_bytes;
+	uint32_t		total_bytes = 0;
 	uint32_t		data_bytes;
 	uint32_t		dif_bytes;
 	uint8_t			bundling = 1;
@@ -1023,8 +1170,10 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
 		    __constant_cpu_to_le16(CF_READ_DATA);
 	}
 
-	tot_prot_dsds = scsi_prot_sg_count(cmd);
-	if (!tot_prot_dsds)
+	if ((scsi_get_prot_op(sp->cmd) == SCSI_PROT_READ_INSERT) ||
+	    (scsi_get_prot_op(sp->cmd) == SCSI_PROT_WRITE_STRIP) ||
+	    (scsi_get_prot_op(sp->cmd) == SCSI_PROT_READ_STRIP) ||
+	    (scsi_get_prot_op(sp->cmd) == SCSI_PROT_WRITE_INSERT))
 		bundling = 0;
 
 	/* Allocate CRC context from global pool */
@@ -1047,7 +1196,7 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
 
 	INIT_LIST_HEAD(&crc_ctx_pkt->dsd_list);
 
-	qla24xx_set_t10dif_tags(cmd, (struct fw_dif_context *)
+	qla24xx_set_t10dif_tags(sp, (struct fw_dif_context *)
 	    &crc_ctx_pkt->ref_tag, tot_prot_dsds);
 
 	cmd_pkt->crc_context_address[0] = cpu_to_le32(LSD(crc_ctx_dma));
@@ -1076,7 +1225,6 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
 		fcp_cmnd->additional_cdb_len |= 2;
 
 	int_to_scsilun(sp->cmd->device->lun, &fcp_cmnd->lun);
-	host_to_fcp_swap((uint8_t *)&fcp_cmnd->lun, sizeof(fcp_cmnd->lun));
 	memcpy(fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len);
 	cmd_pkt->fcp_cmnd_dseg_len = cpu_to_le16(fcp_cmnd_len);
 	cmd_pkt->fcp_cmnd_dseg_address[0] = cpu_to_le32(
@@ -1107,15 +1255,28 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
 	cmd_pkt->fcp_rsp_dseg_len = 0; /* Let response come in status iocb */
 
 	/* Compute dif len and adjust data len to incude protection */
-	total_bytes = data_bytes;
 	dif_bytes = 0;
 	blk_size = cmd->device->sector_size;
-	if (scsi_get_prot_op(cmd) != SCSI_PROT_NORMAL) {
-		dif_bytes = (data_bytes / blk_size) * 8;
-		total_bytes += dif_bytes;
+	dif_bytes = (data_bytes / blk_size) * 8;
+
+	switch (scsi_get_prot_op(sp->cmd)) {
+	case SCSI_PROT_READ_INSERT:
+	case SCSI_PROT_WRITE_STRIP:
+	    total_bytes = data_bytes;
+	    data_bytes += dif_bytes;
+	    break;
+
+	case SCSI_PROT_READ_STRIP:
+	case SCSI_PROT_WRITE_INSERT:
+	case SCSI_PROT_READ_PASS:
+	case SCSI_PROT_WRITE_PASS:
+	    total_bytes = data_bytes + dif_bytes;
+	    break;
+	default:
+	    BUG();
 	}
 
-	if (!ql2xenablehba_err_chk)
+	if (!qla2x00_hba_err_chk_enabled(sp))
 		fw_prot_opts |= 0x10; /* Disable Guard tag checking */
 
 	if (!bundling) {
@@ -1151,7 +1312,12 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
 
 	cmd_pkt->control_flags |=
 	    __constant_cpu_to_le16(CF_DATA_SEG_DESCR_ENABLE);
-	if (qla24xx_walk_and_build_sglist(ha, sp, cur_dsd,
+
+	if (!bundling && tot_prot_dsds) {
+		if (qla24xx_walk_and_build_sglist_no_difb(ha, sp,
+		    cur_dsd, tot_dsds))
+			goto crc_queuing_error;
+	} else if (qla24xx_walk_and_build_sglist(ha, sp, cur_dsd,
 	    (tot_dsds - tot_prot_dsds)))
 		goto crc_queuing_error;
 
@@ -1414,6 +1580,22 @@ qla24xx_dif_start_scsi(srb_t *sp)
 			goto queuing_error;
 		else
 			sp->flags |= SRB_DMA_VALID;
+
+		if ((scsi_get_prot_op(cmd) == SCSI_PROT_READ_INSERT) ||
+		    (scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_STRIP)) {
+			struct qla2_sgx sgx;
+			uint32_t	partial;
+
+			memset(&sgx, 0, sizeof(struct qla2_sgx));
+			sgx.tot_bytes = scsi_bufflen(cmd);
+			sgx.cur_sg = scsi_sglist(cmd);
+			sgx.sp = sp;
+
+			nseg = 0;
+			while (qla24xx_get_one_block_sg(
+			    cmd->device->sector_size, &sgx, &partial))
+				nseg++;
+		}
 	} else
 		nseg = 0;
 
@@ -1428,6 +1610,11 @@ qla24xx_dif_start_scsi(srb_t *sp)
 			goto queuing_error;
 		else
 			sp->flags |= SRB_CRC_PROT_DMA_VALID;
+
+		if ((scsi_get_prot_op(cmd) == SCSI_PROT_READ_INSERT) ||
+		    (scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_STRIP)) {
+			nseg = scsi_bufflen(cmd) / cmd->device->sector_size;
+		}
 	} else {
 		nseg = 0;
 	}
@@ -1454,6 +1641,7 @@ qla24xx_dif_start_scsi(srb_t *sp)
 	/* Build header part of command packet (excluding the OPCODE). */
 	req->current_outstanding_cmd = handle;
 	req->outstanding_cmds[handle] = sp;
+	sp->handle = handle;
 	sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle;
 	req->cnt -= req_cnt;
 
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index b16b7725dee0..646fc5263d50 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -719,7 +719,6 @@ skip_rio:
 			vha->flags.rscn_queue_overflow = 1;
 		}
 
-		atomic_set(&vha->loop_state, LOOP_UPDATE);
 		atomic_set(&vha->loop_down_timer, 0);
 		vha->flags.management_server_logged_in = 0;
 
@@ -1435,25 +1434,27 @@ struct scsi_dif_tuple {
  * ASC/ASCQ fields in the sense buffer with ILLEGAL_REQUEST
  * to indicate to the kernel that the HBA detected error.
  */
-static inline void
+static inline int
 qla2x00_handle_dif_error(srb_t *sp, struct sts_entry_24xx *sts24)
 {
 	struct scsi_qla_host *vha = sp->fcport->vha;
 	struct scsi_cmnd *cmd = sp->cmd;
-	struct scsi_dif_tuple	*ep =
-			(struct scsi_dif_tuple *)&sts24->data[20];
-	struct scsi_dif_tuple	*ap =
-			(struct scsi_dif_tuple *)&sts24->data[12];
+	uint8_t		*ap = &sts24->data[12];
+	uint8_t		*ep = &sts24->data[20];
 	uint32_t	e_ref_tag, a_ref_tag;
 	uint16_t	e_app_tag, a_app_tag;
 	uint16_t	e_guard, a_guard;
 
-	e_ref_tag = be32_to_cpu(ep->ref_tag);
-	a_ref_tag = be32_to_cpu(ap->ref_tag);
-	e_app_tag = be16_to_cpu(ep->app_tag);
-	a_app_tag = be16_to_cpu(ap->app_tag);
-	e_guard = be16_to_cpu(ep->guard);
-	a_guard = be16_to_cpu(ap->guard);
+	/*
+	 * swab32 of the "data" field in the beginning of qla2x00_status_entry()
+	 * would make guard field appear at offset 2
+	 */
+	a_guard   = le16_to_cpu(*(uint16_t *)(ap + 2));
+	a_app_tag = le16_to_cpu(*(uint16_t *)(ap + 0));
+	a_ref_tag = le32_to_cpu(*(uint32_t *)(ap + 4));
+	e_guard   = le16_to_cpu(*(uint16_t *)(ep + 2));
+	e_app_tag = le16_to_cpu(*(uint16_t *)(ep + 0));
+	e_ref_tag = le32_to_cpu(*(uint32_t *)(ep + 4));
 
 	ql_dbg(ql_dbg_io, vha, 0x3023,
 	    "iocb(s) %p Returned STATUS.\n", sts24);
@@ -1465,6 +1466,63 @@ qla2x00_handle_dif_error(srb_t *sp, struct sts_entry_24xx *sts24)
 	    cmd->cmnd[0], (u64)scsi_get_lba(cmd), a_ref_tag, e_ref_tag,
 	    a_app_tag, e_app_tag, a_guard, e_guard);
 
+	/*
+	 * Ignore sector if:
+	 * For type     3: ref & app tag is all 'f's
+	 * For type 0,1,2: app tag is all 'f's
+	 */
+	if ((a_app_tag == 0xffff) &&
+	    ((scsi_get_prot_type(cmd) != SCSI_PROT_DIF_TYPE3) ||
+	     (a_ref_tag == 0xffffffff))) {
+		uint32_t blocks_done, resid;
+		sector_t lba_s = scsi_get_lba(cmd);
+
+		/* 2TB boundary case covered automatically with this */
+		blocks_done = e_ref_tag - (uint32_t)lba_s + 1;
+
+		resid = scsi_bufflen(cmd) - (blocks_done *
+		    cmd->device->sector_size);
+
+		scsi_set_resid(cmd, resid);
+		cmd->result = DID_OK << 16;
+
+		/* Update protection tag */
+		if (scsi_prot_sg_count(cmd)) {
+			uint32_t i, j = 0, k = 0, num_ent;
+			struct scatterlist *sg;
+			struct sd_dif_tuple *spt;
+
+			/* Patch the corresponding protection tags */
+			scsi_for_each_prot_sg(cmd, sg,
+			    scsi_prot_sg_count(cmd), i) {
+				num_ent = sg_dma_len(sg) / 8;
+				if (k + num_ent < blocks_done) {
+					k += num_ent;
+					continue;
+				}
+				j = blocks_done - k - 1;
+				k = blocks_done;
+				break;
+			}
+
+			if (k != blocks_done) {
+				qla_printk(KERN_WARNING, sp->fcport->vha->hw,
+				    "unexpected tag values tag:lba=%x:%lx)\n",
+				    e_ref_tag, lba_s);
+				return 1;
+			}
+
+			spt = page_address(sg_page(sg)) + sg->offset;
+			spt += j;
+
+			spt->app_tag = 0xffff;
+			if (scsi_get_prot_type(cmd) == SCSI_PROT_DIF_TYPE3)
+				spt->ref_tag = 0xffffffff;
+		}
+
+		return 0;
+	}
+
 	/* check guard */
 	if (e_guard != a_guard) {
 		scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
@@ -1472,28 +1530,30 @@ qla2x00_handle_dif_error(srb_t *sp, struct sts_entry_24xx *sts24)
 		set_driver_byte(cmd, DRIVER_SENSE);
 		set_host_byte(cmd, DID_ABORT);
 		cmd->result |= SAM_STAT_CHECK_CONDITION << 1;
-		return;
+		return 1;
 	}
 
-	/* check appl tag */
-	if (e_app_tag != a_app_tag) {
+	/* check ref tag */
+	if (e_ref_tag != a_ref_tag) {
 		scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
-		    0x10, 0x2);
+		    0x10, 0x3);
 		set_driver_byte(cmd, DRIVER_SENSE);
 		set_host_byte(cmd, DID_ABORT);
 		cmd->result |= SAM_STAT_CHECK_CONDITION << 1;
-		return;
+		return 1;
 	}
 
-	/* check ref tag */
-	if (e_ref_tag != a_ref_tag) {
+	/* check appl tag */
+	if (e_app_tag != a_app_tag) {
 		scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
-		    0x10, 0x3);
+		    0x10, 0x2);
 		set_driver_byte(cmd, DRIVER_SENSE);
 		set_host_byte(cmd, DID_ABORT);
 		cmd->result |= SAM_STAT_CHECK_CONDITION << 1;
-		return;
+		return 1;
 	}
+
+	return 1;
 }
 
 /**
@@ -1767,7 +1827,7 @@ check_scsi_status:
 		break;
 
 	case CS_DIF_ERROR:
-		qla2x00_handle_dif_error(sp, sts24);
+		logit = qla2x00_handle_dif_error(sp, sts24);
 		break;
 	default:
 		cp->result = DID_ERROR << 16;
@@ -2468,11 +2528,10 @@ qla2x00_request_irqs(struct qla_hw_data *ha, struct rsp_que *rsp)
 		goto skip_msi;
 	}
 
-	if (IS_QLA2432(ha) && (ha->pdev->revision < QLA_MSIX_CHIP_REV_24XX ||
-		!QLA_MSIX_FW_MODE_1(ha->fw_attributes))) {
+	if (IS_QLA2432(ha) && (ha->pdev->revision < QLA_MSIX_CHIP_REV_24XX)) {
 		ql_log(ql_log_warn, vha, 0x0035,
 		    "MSI-X; Unsupported ISP2432 (0x%X, 0x%X).\n",
-		    ha->pdev->revision, ha->fw_attributes);
+		    ha->pdev->revision, QLA_MSIX_CHIP_REV_24XX);
 		goto skip_msix;
 	}
 
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index c706ed370000..f488cc69fc79 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -472,7 +472,7 @@ qla24xx_create_vhost(struct fc_vport *fc_vport)
 	host->can_queue = base_vha->req->length + 128;
 	host->this_id = 255;
 	host->cmd_per_lun = 3;
-	if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif)
+	if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif)
 		host->max_cmd_len = 32;
 	else
 		host->max_cmd_len = MAX_CMDSZ;
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 5cbf33a50b14..049807cda419 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -2208,6 +2208,7 @@ qla82xx_msix_rsp_q(int irq, void *dev_id)
 	struct qla_hw_data *ha;
 	struct rsp_que *rsp;
 	struct device_reg_82xx __iomem *reg;
+	unsigned long flags;
 
 	rsp = (struct rsp_que *) dev_id;
 	if (!rsp) {
@@ -2218,11 +2219,11 @@ qla82xx_msix_rsp_q(int irq, void *dev_id)
 
 	ha = rsp->hw;
 	reg = &ha->iobase->isp82;
-	spin_lock_irq(&ha->hardware_lock);
+	spin_lock_irqsave(&ha->hardware_lock, flags);
 	vha = pci_get_drvdata(ha->pdev);
 	qla24xx_process_response_queue(vha, rsp);
 	WRT_REG_DWORD(&reg->host_int, 0);
-	spin_unlock_irq(&ha->hardware_lock);
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 	return IRQ_HANDLED;
 }
 
@@ -2838,6 +2839,16 @@ sufficient_dsds:
 		int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun);
 		host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun));
 
+		/* build FCP_CMND IU */
+		memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd));
+		int_to_scsilun(sp->cmd->device->lun, &ctx->fcp_cmnd->lun);
+		ctx->fcp_cmnd->additional_cdb_len = additional_cdb_len;
+
+		if (cmd->sc_data_direction == DMA_TO_DEVICE)
+			ctx->fcp_cmnd->additional_cdb_len |= 1;
+		else if (cmd->sc_data_direction == DMA_FROM_DEVICE)
+			ctx->fcp_cmnd->additional_cdb_len |= 2;
+
 		/*
 		 * Update tagged queuing modifier -- default is TSK_SIMPLE (0).
 		 */
@@ -2854,16 +2865,6 @@ sufficient_dsds:
 			}
 		}
 
-		/* build FCP_CMND IU */
-		memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd));
-		int_to_scsilun(sp->cmd->device->lun, &ctx->fcp_cmnd->lun);
-		ctx->fcp_cmnd->additional_cdb_len = additional_cdb_len;
-
-		if (cmd->sc_data_direction == DMA_TO_DEVICE)
-			ctx->fcp_cmnd->additional_cdb_len |= 1;
-		else if (cmd->sc_data_direction == DMA_FROM_DEVICE)
-			ctx->fcp_cmnd->additional_cdb_len |= 2;
-
 		memcpy(ctx->fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len);
 
 		fcp_dl = (uint32_t *)(ctx->fcp_cmnd->cdb + 16 +
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index e02df276804e..4cace3f20c04 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -106,17 +106,21 @@ MODULE_PARM_DESC(ql2xmaxqdepth,
 		"Maximum queue depth to report for target devices.");
 
 /* Do not change the value of this after module load */
-int ql2xenabledif = 1;
+int ql2xenabledif = 0;
 module_param(ql2xenabledif, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(ql2xenabledif,
 		" Enable T10-CRC-DIF "
-		" Default is 0 - No DIF Support. 1 - Enable it");
+		" Default is 0 - No DIF Support. 1 - Enable it"
+		", 2 - Enable DIF for all types, except Type 0.");
 
-int ql2xenablehba_err_chk;
+int ql2xenablehba_err_chk = 2;
 module_param(ql2xenablehba_err_chk, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(ql2xenablehba_err_chk,
-		" Enable T10-CRC-DIF Error isolation by HBA"
-		" Default is 0 - Error isolation disabled, 1 - Enable it");
+		" Enable T10-CRC-DIF Error isolation by HBA:\n"
+		" Default is 1.\n"
+		"  0 -- Error isolation disabled\n"
+		"  1 -- Error isolation enabled only for DIX Type 0\n"
+		"  2 -- Error isolation enabled for all Types\n");
 
 int ql2xiidmaenable=1;
 module_param(ql2xiidmaenable, int, S_IRUGO);
@@ -909,7 +913,14 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 		    "Abort command mbx success.\n");
 		wait = 1;
 	}
+
+	spin_lock_irqsave(&ha->hardware_lock, flags);
 	qla2x00_sp_compl(ha, sp);
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+	/* Did the command return during mailbox execution? */
+	if (ret == FAILED && !CMD_SP(cmd))
+		ret = SUCCESS;
 
 	/* Wait for the command to be returned. */
 	if (wait) {
@@ -2251,7 +2262,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	host->this_id = 255;
 	host->cmd_per_lun = 3;
 	host->unique_id = host->host_no;
-	if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif)
+	if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif)
 		host->max_cmd_len = 32;
 	else
 		host->max_cmd_len = MAX_CMDSZ;
@@ -2378,13 +2389,16 @@ skip_dpc:
 	    "Detected hba at address=%p.\n",
 	    ha);
 
-	if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) {
+	if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) {
 		if (ha->fw_attributes & BIT_4) {
+			int prot = 0;
 			base_vha->flags.difdix_supported = 1;
 			ql_dbg(ql_dbg_init, base_vha, 0x00f1,
 			    "Registering for DIF/DIX type 1 and 3 protection.\n");
+			if (ql2xenabledif == 1)
+				prot = SHOST_DIX_TYPE0_PROTECTION;
 			scsi_host_set_prot(host,
-			    SHOST_DIF_TYPE1_PROTECTION
+			    prot | SHOST_DIF_TYPE1_PROTECTION
 			    | SHOST_DIF_TYPE2_PROTECTION
 			    | SHOST_DIF_TYPE3_PROTECTION
 			    | SHOST_DIX_TYPE1_PROTECTION
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 062c97bf62f5..13b6357c1fa2 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.03.07.03-k"
+#define QLA2XXX_VERSION      "8.03.07.07-k"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	3