Merge branch 'spear/dwdma' into late/cleanup

This is a series originally prepared for inclusion in 3.9, which did
not work out because of dependencies on the dmaengine driver. All the
changes for the dmaengine code are merged in 3.9 now, so we can finally
do the switchover and remove the now unnecessary dma definitions for
spear13xx from the platform code.

The dma platform_data actually made up the majority of the spear13xx
platform code overall, so moving that into device tree files makes the
code substantially smaller.

* spear/dwdma:
  ata: arasan: remove the need for platform_data
  ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT
  serial: pl011: use generic DMA slave configuration if possible
  spi: pl022: use generic DMA slave configuration if possible

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

16 files changed, 219 insertions, 302 deletions

diff --git a/Documentation/devicetree/bindings/arm/primecell.txt b/Documentation/devicetree/bindings/arm/primecell.txt
index 64fc82bc8928..0df6acacfaea 100644
--- a/Documentation/devicetree/bindings/arm/primecell.txt
+++ b/Documentation/devicetree/bindings/arm/primecell.txt
@@ -16,14 +16,31 @@ Optional properties:
 - clocks : From common clock binding. First clock is phandle to clock for apb
 	pclk. Additional clocks are optional and specific to those peripherals.
 - clock-names : From common clock binding. Shall be "apb_pclk" for first clock.
+- dmas : From common DMA binding. If present, refers to one or more dma channels.
+- dma-names : From common DMA binding, needs to match the 'dmas' property.
+              Devices with exactly one receive and transmit channel shall name
+              these "rx" and "tx", respectively.
+- pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt
+- pinctrl-names : Names corresponding to the numbered pinctrl states
+- interrupts : one or more interrupt specifiers
+- interrupt-names : names corresponding to the interrupts properties
 
 Example:
 
 serial@fff36000 {
 	compatible = "arm,pl011", "arm,primecell";
 	arm,primecell-periphid = <0x00341011>;
+
 	clocks = <&pclk>;
 	clock-names = "apb_pclk";
-	
+
+	dmas = <&dma-controller 4>, <&dma-controller 5>;
+	dma-names = "rx", "tx";	
+
+	pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>;
+	pinctrl-1 = <&uart0_sleep_mode>;
+	pinctrl-names = "default","sleep";
+
+	interrupts = <0 11 0x4>;
 };
 
diff --git a/Documentation/devicetree/bindings/ata/pata-arasan.txt b/Documentation/devicetree/bindings/ata/pata-arasan.txt
index 95ec7f825ede..2aff154be84e 100644
--- a/Documentation/devicetree/bindings/ata/pata-arasan.txt
+++ b/Documentation/devicetree/bindings/ata/pata-arasan.txt
@@ -6,6 +6,26 @@ Required properties:
 - interrupt-parent: Should be the phandle for the interrupt controller
   that services interrupts for this device
 - interrupt: Should contain the CF interrupt number
+- clock-frequency: Interface clock rate, in Hz, one of
+       25000000
+       33000000
+       40000000
+       50000000
+       66000000
+       75000000
+      100000000
+      125000000
+      150000000
+      166000000
+      200000000
+
+Optional properties:
+- arasan,broken-udma: if present, UDMA mode is unusable
+- arasan,broken-mwdma: if present, MWDMA mode is unusable
+- arasan,broken-pio: if present, PIO mode is unusable
+- dmas: one DMA channel, as described in bindings/dma/dma.txt
+  required unless both UDMA and MWDMA mode are broken
+- dma-names: the corresponding channel name, must be "data"
 
 Example:
 
@@ -14,4 +34,6 @@ Example:
 		reg = <0xfc000000 0x1000>;
 		interrupt-parent = <&vic1>;
 		interrupts = <12>;
+		dmas = <&dma-controller 23>;
+		dma-names = "data";
 	};
diff --git a/Documentation/devicetree/bindings/serial/pl011.txt b/Documentation/devicetree/bindings/serial/pl011.txt
new file mode 100644
index 000000000000..5d2e840ae65c
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/pl011.txt
@@ -0,0 +1,17 @@
+* ARM AMBA Primecell PL011 serial UART
+
+Required properties:
+- compatible: must be "arm,primecell", "arm,pl011"
+- reg: exactly one register range with length 0x1000
+- interrupts: exactly one interrupt specifier
+
+Optional properties:
+- pinctrl: When present, must have one state named "sleep"
+	   and one state named "default"
+- clocks:  When present, must refer to exactly one clock named
+	   "apb_pclk"
+- dmas:	   When present, may have one or two dma channels.
+	   The first one must be named "rx", the second one
+	   must be named "tx".
+
+See also bindings/arm/primecell.txt
diff --git a/Documentation/devicetree/bindings/spi/spi_pl022.txt b/Documentation/devicetree/bindings/spi/spi_pl022.txt
index f158fd31cfda..22ed6797216d 100644
--- a/Documentation/devicetree/bindings/spi/spi_pl022.txt
+++ b/Documentation/devicetree/bindings/spi/spi_pl022.txt
@@ -16,6 +16,11 @@ Optional properties:
                             device will be suspended immediately
 - pl022,rt : indicates the controller should run the message pump with realtime
              priority to minimise the transfer latency on the bus (boolean)
+- dmas : Two or more DMA channel specifiers following the convention outlined
+         in bindings/dma/dma.txt
+- dma-names: Names for the dma channels, if present. There must be at
+	     least one channel named "tx" for transmit and named "rx" for
+             receive.
 
 
 SPI slave nodes must be children of the SPI master node and can
@@ -32,3 +37,34 @@ contain the following properties.
 - pl022,wait-state : Microwire interface: Wait state
 - pl022,duplex : Microwire interface: Full/Half duplex
 
+
+Example:
+
+	spi@e0100000 {
+		compatible = "arm,pl022", "arm,primecell";
+		reg = <0xe0100000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 31 0x4>;
+		dmas = <&dma-controller 23 1>,
+			<&dma-controller 24 0>;
+		dma-names = "rx", "tx";
+
+		m25p80@1 {
+			compatible = "st,m25p80";
+			reg = <1>;
+			spi-max-frequency = <12000000>;
+			spi-cpol;
+			spi-cpha;
+			pl022,hierarchy = <0>;
+			pl022,interface = <0>;
+			pl022,slave-tx-disable;
+			pl022,com-mode = <0x2>;
+			pl022,rx-level-trig = <0>;
+			pl022,tx-level-trig = <0>;
+			pl022,ctrl-len = <0x11>;
+			pl022,wait-state = <0>;
+			pl022,duplex = <0>;
+		};
+	};
+	
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
index 34da11aa6795..e1786a0b2fcd 100644
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -113,6 +113,9 @@
 				reg = <0xb4100000 0x1000>;
 				interrupts = <0 105 0x4>;
 				status = "disabled";
+				dmas = <&dwdma0 0x600 0 0 1>, /* 0xC << 11 */
+					<&dwdma0 0x680 0 1 0>; /* 0xD << 7 */
+				dma-names = "tx", "rx";
 			};
 
 			thermal@e07008c4 {
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
index b4ca60f4eb42..45597fd91050 100644
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -98,13 +98,24 @@
 			reg = <0xb2800000 0x1000>;
 			interrupts = <0 29 0x4>;
 			status = "disabled";
+			dmas = <&dwdma0 0 0 0 0>;
+			dma-names = "data";
 		};
 
-		dma@ea800000 {
+		dwdma0: dma@ea800000 {
 			compatible = "snps,dma-spear1340";
 			reg = <0xea800000 0x1000>;
 			interrupts = <0 19 0x4>;
 			status = "disabled";
+
+			dma-channels = <8>;
+			#dma-cells = <3>;
+			dma-requests = <32>;
+			chan_allocation_order = <1>;
+			chan_priority = <1>;
+			block_size = <0xfff>;
+			dma-masters = <2>;
+			data_width = <3 3 0 0>;
 		};
 
 		dma@eb000000 {
@@ -112,6 +123,15 @@
 			reg = <0xeb000000 0x1000>;
 			interrupts = <0 59 0x4>;
 			status = "disabled";
+
+			dma-requests = <32>;
+			dma-channels = <8>;
+			dma-masters = <2>;
+			#dma-cells = <3>;
+			chan_allocation_order = <1>;
+			chan_priority = <1>;
+			block_size = <0xfff>;
+			data_width = <3 3 0 0>;
 		};
 
 		fsmc: flash@b0000000 {
@@ -261,6 +281,9 @@
 				#size-cells = <0>;
 				interrupts = <0 31 0x4>;
 				status = "disabled";
+				dmas = <&dwdma0 0x2000 0 0 0>, /* 0x4 << 11 */
+					<&dwdma0 0x0280 0 0 0>;  /* 0x5 << 7 */
+				dma-names = "tx", "rx";
 			};
 
 			rtc@e0580000 {
diff --git a/arch/arm/mach-spear/generic.h b/arch/arm/mach-spear/generic.h
index 8ba7e75b648d..a9fd45362fee 100644
--- a/arch/arm/mach-spear/generic.h
+++ b/arch/arm/mach-spear/generic.h
@@ -22,11 +22,6 @@ extern void spear13xx_timer_init(void);
 extern void spear3xx_timer_init(void);
 extern struct pl022_ssp_controller pl022_plat_data;
 extern struct pl08x_platform_data pl080_plat_data;
-extern struct dw_dma_platform_data dmac_plat_data;
-extern struct dw_dma_slave cf_dma_priv;
-extern struct dw_dma_slave nand_read_dma_priv;
-extern struct dw_dma_slave nand_write_dma_priv;
-bool dw_dma_filter(struct dma_chan *chan, void *slave);
 
 void __init spear_setup_of_timer(void);
 void __init spear3xx_clk_init(void __iomem *misc_base,
diff --git a/arch/arm/mach-spear/include/mach/spear.h b/arch/arm/mach-spear/include/mach/spear.h
index 374ddc393df1..cf3a5369eeca 100644
--- a/arch/arm/mach-spear/include/mach/spear.h
+++ b/arch/arm/mach-spear/include/mach/spear.h
@@ -82,8 +82,6 @@
 #define VA_L2CC_BASE				IOMEM(UL(0xFB000000))
 
 /* others */
-#define DMAC0_BASE				UL(0xEA800000)
-#define DMAC1_BASE				UL(0xEB000000)
 #define MCIF_CF_BASE				UL(0xB2800000)
 
 /* Debug uart for linux, will be used for debug and uncompress messages */
diff --git a/arch/arm/mach-spear/spear1310.c b/arch/arm/mach-spear/spear1310.c
index ed3b5c287a7b..9eaac2c881ea 100644
--- a/arch/arm/mach-spear/spear1310.c
+++ b/arch/arm/mach-spear/spear1310.c
@@ -23,40 +23,12 @@
 #include <mach/spear.h>
 
 /* Base addresses */
-#define SPEAR1310_SSP1_BASE			UL(0x5D400000)
-#define SPEAR1310_SATA0_BASE			UL(0xB1000000)
-#define SPEAR1310_SATA1_BASE			UL(0xB1800000)
-#define SPEAR1310_SATA2_BASE			UL(0xB4000000)
-
 #define SPEAR1310_RAS_GRP1_BASE			UL(0xD8000000)
 #define VA_SPEAR1310_RAS_GRP1_BASE		UL(0xFA000000)
 
-static struct arasan_cf_pdata cf_pdata = {
-	.cf_if_clk = CF_IF_CLK_166M,
-	.quirk = CF_BROKEN_UDMA,
-	.dma_priv = &cf_dma_priv,
-};
-
-/* ssp device registration */
-static struct pl022_ssp_controller ssp1_plat_data = {
-	.enable_dma = 0,
-};
-
-/* Add SPEAr1310 auxdata to pass platform data */
-static struct of_dev_auxdata spear1310_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_pdata),
-	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data),
-	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data),
-	OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data),
-
-	OF_DEV_AUXDATA("arm,pl022", SPEAR1310_SSP1_BASE, NULL, &ssp1_plat_data),
-	{}
-};
-
 static void __init spear1310_dt_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table,
-			spear1310_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char * const spear1310_dt_board_compat[] = {
diff --git a/arch/arm/mach-spear/spear1340.c b/arch/arm/mach-spear/spear1340.c
index 75e38644bbfb..a04a7fe76f71 100644
--- a/arch/arm/mach-spear/spear1340.c
+++ b/arch/arm/mach-spear/spear1340.c
@@ -16,18 +16,16 @@
 #include <linux/ahci_platform.h>
 #include <linux/amba/serial.h>
 #include <linux/delay.h>
-#include <linux/dw_dmac.h>
 #include <linux/of_platform.h>
 #include <linux/irqchip.h>
 #include <asm/mach/arch.h>
 #include "generic.h"
 #include <mach/spear.h>
 
-#include "spear13xx-dma.h"
+/* FIXME: Move SATA PHY code into a standalone driver */
 
 /* Base addresses */
 #define SPEAR1340_SATA_BASE			UL(0xB1000000)
-#define SPEAR1340_UART1_BASE			UL(0xB4100000)
 
 /* Power Management Registers */
 #define SPEAR1340_PCM_CFG			(VA_MISC_BASE + 0x100)
@@ -79,28 +77,6 @@
 			(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
 			SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
 
-static struct dw_dma_slave uart1_dma_param[] = {
-	{
-		/* Tx */
-		.cfg_hi = DWC_CFGH_DST_PER(SPEAR1340_DMA_REQ_UART1_TX),
-		.cfg_lo = 0,
-		.src_master = DMA_MASTER_MEMORY,
-		.dst_master = SPEAR1340_DMA_MASTER_UART1,
-	}, {
-		/* Rx */
-		.cfg_hi = DWC_CFGH_SRC_PER(SPEAR1340_DMA_REQ_UART1_RX),
-		.cfg_lo = 0,
-		.src_master = SPEAR1340_DMA_MASTER_UART1,
-		.dst_master = DMA_MASTER_MEMORY,
-	}
-};
-
-static struct amba_pl011_data uart1_data = {
-	.dma_filter = dw_dma_filter,
-	.dma_tx_param = &uart1_dma_param[0],
-	.dma_rx_param = &uart1_dma_param[1],
-};
-
 /* SATA device registration */
 static int sata_miphy_init(struct device *dev, void __iomem *addr)
 {
@@ -159,14 +135,8 @@ static struct ahci_platform_data sata_pdata = {
 
 /* Add SPEAr1340 auxdata to pass platform data */
 static struct of_dev_auxdata spear1340_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_dma_priv),
-	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data),
-	OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data),
-	OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data),
-
 	OF_DEV_AUXDATA("snps,spear-ahci", SPEAR1340_SATA_BASE, NULL,
 			&sata_pdata),
-	OF_DEV_AUXDATA("arm,pl011", SPEAR1340_UART1_BASE, NULL, &uart1_data),
 	{}
 };
 
diff --git a/arch/arm/mach-spear/spear13xx-dma.h b/arch/arm/mach-spear/spear13xx-dma.h
deleted file mode 100644
index d50bdb605925..000000000000
--- a/arch/arm/mach-spear/spear13xx-dma.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * arch/arm/mach-spear13xx/include/mach/dma.h
- *
- * DMA information for SPEAr13xx machine family
- *
- * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_DMA_H
-#define __MACH_DMA_H
-
-/* request id of all the peripherals */
-enum dma_master_info {
-	/* Accessible from only one master */
-	DMA_MASTER_MCIF = 0,
-	DMA_MASTER_FSMC = 1,
-	/* Accessible from both 0 & 1 */
-	DMA_MASTER_MEMORY = 0,
-	DMA_MASTER_ADC = 0,
-	DMA_MASTER_UART0 = 0,
-	DMA_MASTER_SSP0 = 0,
-	DMA_MASTER_I2C0 = 0,
-
-#ifdef CONFIG_MACH_SPEAR1310
-	/* Accessible from only one master */
-	SPEAR1310_DMA_MASTER_JPEG = 1,
-
-	/* Accessible from both 0 & 1 */
-	SPEAR1310_DMA_MASTER_I2S = 0,
-	SPEAR1310_DMA_MASTER_UART1 = 0,
-	SPEAR1310_DMA_MASTER_UART2 = 0,
-	SPEAR1310_DMA_MASTER_UART3 = 0,
-	SPEAR1310_DMA_MASTER_UART4 = 0,
-	SPEAR1310_DMA_MASTER_UART5 = 0,
-	SPEAR1310_DMA_MASTER_I2C1 = 0,
-	SPEAR1310_DMA_MASTER_I2C2 = 0,
-	SPEAR1310_DMA_MASTER_I2C3 = 0,
-	SPEAR1310_DMA_MASTER_I2C4 = 0,
-	SPEAR1310_DMA_MASTER_I2C5 = 0,
-	SPEAR1310_DMA_MASTER_I2C6 = 0,
-	SPEAR1310_DMA_MASTER_I2C7 = 0,
-	SPEAR1310_DMA_MASTER_SSP1 = 0,
-#endif
-
-#ifdef CONFIG_MACH_SPEAR1340
-	/* Accessible from only one master */
-	SPEAR1340_DMA_MASTER_I2S_PLAY = 1,
-	SPEAR1340_DMA_MASTER_I2S_REC = 1,
-	SPEAR1340_DMA_MASTER_I2C1 = 1,
-	SPEAR1340_DMA_MASTER_UART1 = 1,
-
-	/* following are accessible from both master 0 & 1 */
-	SPEAR1340_DMA_MASTER_SPDIF = 0,
-	SPEAR1340_DMA_MASTER_CAM = 1,
-	SPEAR1340_DMA_MASTER_VIDEO_IN = 0,
-	SPEAR1340_DMA_MASTER_MALI = 0,
-#endif
-};
-
-enum request_id {
-	DMA_REQ_ADC = 0,
-	DMA_REQ_SSP0_TX = 4,
-	DMA_REQ_SSP0_RX = 5,
-	DMA_REQ_UART0_TX = 6,
-	DMA_REQ_UART0_RX = 7,
-	DMA_REQ_I2C0_TX = 8,
-	DMA_REQ_I2C0_RX = 9,
-
-#ifdef CONFIG_MACH_SPEAR1310
-	SPEAR1310_DMA_REQ_FROM_JPEG = 2,
-	SPEAR1310_DMA_REQ_TO_JPEG = 3,
-	SPEAR1310_DMA_REQ_I2S_TX = 10,
-	SPEAR1310_DMA_REQ_I2S_RX = 11,
-
-	SPEAR1310_DMA_REQ_I2C1_RX = 0,
-	SPEAR1310_DMA_REQ_I2C1_TX = 1,
-	SPEAR1310_DMA_REQ_I2C2_RX = 2,
-	SPEAR1310_DMA_REQ_I2C2_TX = 3,
-	SPEAR1310_DMA_REQ_I2C3_RX = 4,
-	SPEAR1310_DMA_REQ_I2C3_TX = 5,
-	SPEAR1310_DMA_REQ_I2C4_RX = 6,
-	SPEAR1310_DMA_REQ_I2C4_TX = 7,
-	SPEAR1310_DMA_REQ_I2C5_RX = 8,
-	SPEAR1310_DMA_REQ_I2C5_TX = 9,
-	SPEAR1310_DMA_REQ_I2C6_RX = 10,
-	SPEAR1310_DMA_REQ_I2C6_TX = 11,
-	SPEAR1310_DMA_REQ_UART1_RX = 12,
-	SPEAR1310_DMA_REQ_UART1_TX = 13,
-	SPEAR1310_DMA_REQ_UART2_RX = 14,
-	SPEAR1310_DMA_REQ_UART2_TX = 15,
-	SPEAR1310_DMA_REQ_UART5_RX = 16,
-	SPEAR1310_DMA_REQ_UART5_TX = 17,
-	SPEAR1310_DMA_REQ_SSP1_RX = 18,
-	SPEAR1310_DMA_REQ_SSP1_TX = 19,
-	SPEAR1310_DMA_REQ_I2C7_RX = 20,
-	SPEAR1310_DMA_REQ_I2C7_TX = 21,
-	SPEAR1310_DMA_REQ_UART3_RX = 28,
-	SPEAR1310_DMA_REQ_UART3_TX = 29,
-	SPEAR1310_DMA_REQ_UART4_RX = 30,
-	SPEAR1310_DMA_REQ_UART4_TX = 31,
-#endif
-
-#ifdef CONFIG_MACH_SPEAR1340
-	SPEAR1340_DMA_REQ_SPDIF_TX = 2,
-	SPEAR1340_DMA_REQ_SPDIF_RX = 3,
-	SPEAR1340_DMA_REQ_I2S_TX = 10,
-	SPEAR1340_DMA_REQ_I2S_RX = 11,
-	SPEAR1340_DMA_REQ_UART1_TX = 12,
-	SPEAR1340_DMA_REQ_UART1_RX = 13,
-	SPEAR1340_DMA_REQ_I2C1_TX = 14,
-	SPEAR1340_DMA_REQ_I2C1_RX = 15,
-	SPEAR1340_DMA_REQ_CAM0_EVEN = 0,
-	SPEAR1340_DMA_REQ_CAM0_ODD = 1,
-	SPEAR1340_DMA_REQ_CAM1_EVEN = 2,
-	SPEAR1340_DMA_REQ_CAM1_ODD = 3,
-	SPEAR1340_DMA_REQ_CAM2_EVEN = 4,
-	SPEAR1340_DMA_REQ_CAM2_ODD = 5,
-	SPEAR1340_DMA_REQ_CAM3_EVEN = 6,
-	SPEAR1340_DMA_REQ_CAM3_ODD = 7,
-#endif
-};
-
-#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c
index 1b97e8623472..3975916666a0 100644
--- a/arch/arm/mach-spear/spear13xx.c
+++ b/arch/arm/mach-spear/spear13xx.c
@@ -15,7 +15,6 @@
 
 #include <linux/amba/pl022.h>
 #include <linux/clk.h>
-#include <linux/dw_dmac.h>
 #include <linux/err.h>
 #include <linux/of.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -24,63 +23,6 @@
 #include "generic.h"
 #include <mach/spear.h>
 
-#include "spear13xx-dma.h"
-
-/* common dw_dma filter routine to be used by peripherals */
-bool dw_dma_filter(struct dma_chan *chan, void *slave)
-{
-	struct dw_dma_slave *dws = (struct dw_dma_slave *)slave;
-
-	if (chan->device->dev == dws->dma_dev) {
-		chan->private = slave;
-		return true;
-	} else {
-		return false;
-	}
-}
-
-/* ssp device registration */
-static struct dw_dma_slave ssp_dma_param[] = {
-	{
-		/* Tx */
-		.cfg_hi = DWC_CFGH_DST_PER(DMA_REQ_SSP0_TX),
-		.cfg_lo = 0,
-		.src_master = DMA_MASTER_MEMORY,
-		.dst_master = DMA_MASTER_SSP0,
-	}, {
-		/* Rx */
-		.cfg_hi = DWC_CFGH_SRC_PER(DMA_REQ_SSP0_RX),
-		.cfg_lo = 0,
-		.src_master = DMA_MASTER_SSP0,
-		.dst_master = DMA_MASTER_MEMORY,
-	}
-};
-
-struct pl022_ssp_controller pl022_plat_data = {
-	.enable_dma = 1,
-	.dma_filter = dw_dma_filter,
-	.dma_rx_param = &ssp_dma_param[1],
-	.dma_tx_param = &ssp_dma_param[0],
-};
-
-/* CF device registration */
-struct dw_dma_slave cf_dma_priv = {
-	.cfg_hi = 0,
-	.cfg_lo = 0,
-	.src_master = 0,
-	.dst_master = 0,
-};
-
-/* dmac device registeration */
-struct dw_dma_platform_data dmac_plat_data = {
-	.nr_channels = 8,
-	.chan_allocation_order = CHAN_ALLOCATION_DESCENDING,
-	.chan_priority = CHAN_PRIORITY_DESCENDING,
-	.block_size = 4095U,
-	.nr_masters = 2,
-	.data_width = { 3, 3, 0, 0 },
-};
-
 void __init spear13xx_l2x0_init(void)
 {
 	/*
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index 405022d302c3..7638121cb5d1 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -209,8 +209,6 @@ struct arasan_cf_dev {
 	struct dma_chan *dma_chan;
 	/* Mask for DMA transfers */
 	dma_cap_mask_t mask;
-	/* dma channel private data */
-	void *dma_priv;
 	/* DMA transfer work */
 	struct work_struct work;
 	/* DMA delayed finish work */
@@ -308,6 +306,7 @@ static void cf_card_detect(struct arasan_cf_dev *acdev, bool hotplugged)
 static int cf_init(struct arasan_cf_dev *acdev)
 {
 	struct arasan_cf_pdata *pdata = dev_get_platdata(acdev->host->dev);
+	unsigned int if_clk;
 	unsigned long flags;
 	int ret = 0;
 
@@ -325,8 +324,12 @@ static int cf_init(struct arasan_cf_dev *acdev)
 
 	spin_lock_irqsave(&acdev->host->lock, flags);
 	/* configure CF interface clock */
-	writel((pdata->cf_if_clk <= CF_IF_CLK_200M) ? pdata->cf_if_clk :
-			CF_IF_CLK_166M, acdev->vbase + CLK_CFG);
+	/* TODO: read from device tree */
+	if_clk = CF_IF_CLK_166M;
+	if (pdata && pdata->cf_if_clk <= CF_IF_CLK_200M)
+		if_clk = pdata->cf_if_clk;
+
+	writel(if_clk, acdev->vbase + CLK_CFG);
 
 	writel(TRUE_IDE_MODE | CFHOST_ENB, acdev->vbase + OP_MODE);
 	cf_interrupt_enable(acdev, CARD_DETECT_IRQ, 1);
@@ -357,12 +360,6 @@ static void dma_callback(void *dev)
 	complete(&acdev->dma_completion);
 }
 
-static bool filter(struct dma_chan *chan, void *slave)
-{
-	chan->private = slave;
-	return true;
-}
-
 static inline void dma_complete(struct arasan_cf_dev *acdev)
 {
 	struct ata_queued_cmd *qc = acdev->qc;
@@ -530,8 +527,7 @@ static void data_xfer(struct work_struct *work)
 
 	/* request dma channels */
 	/* dma_request_channel may sleep, so calling from process context */
-	acdev->dma_chan = dma_request_channel(acdev->mask, filter,
-			acdev->dma_priv);
+	acdev->dma_chan = dma_request_slave_channel(acdev->host->dev, "data");
 	if (!acdev->dma_chan) {
 		dev_err(acdev->host->dev, "Unable to get dma_chan\n");
 		goto chan_request_fail;
@@ -798,6 +794,7 @@ static int arasan_cf_probe(struct platform_device *pdev)
 	struct ata_host *host;
 	struct ata_port *ap;
 	struct resource *res;
+	u32 quirk;
 	irq_handler_t irq_handler = NULL;
 	int ret = 0;
 
@@ -817,12 +814,17 @@ static int arasan_cf_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	if (pdata)
+		quirk = pdata->quirk;
+	else
+		quirk = CF_BROKEN_UDMA; /* as it is on spear1340 */
+
 	/* if irq is 0, support only PIO */
 	acdev->irq = platform_get_irq(pdev, 0);
 	if (acdev->irq)
 		irq_handler = arasan_cf_interrupt;
 	else
-		pdata->quirk |= CF_BROKEN_MWDMA | CF_BROKEN_UDMA;
+		quirk |= CF_BROKEN_MWDMA | CF_BROKEN_UDMA;
 
 	acdev->pbase = res->start;
 	acdev->vbase = devm_ioremap_nocache(&pdev->dev, res->start,
@@ -859,17 +861,16 @@ static int arasan_cf_probe(struct platform_device *pdev)
 	INIT_WORK(&acdev->work, data_xfer);
 	INIT_DELAYED_WORK(&acdev->dwork, delayed_finish);
 	dma_cap_set(DMA_MEMCPY, acdev->mask);
-	acdev->dma_priv = pdata->dma_priv;
 
 	/* Handle platform specific quirks */
-	if (pdata->quirk) {
-		if (pdata->quirk & CF_BROKEN_PIO) {
+	if (quirk) {
+		if (quirk & CF_BROKEN_PIO) {
 			ap->ops->set_piomode = NULL;
 			ap->pio_mask = 0;
 		}
-		if (pdata->quirk & CF_BROKEN_MWDMA)
+		if (quirk & CF_BROKEN_MWDMA)
 			ap->mwdma_mask = 0;
-		if (pdata->quirk & CF_BROKEN_UDMA)
+		if (quirk & CF_BROKEN_UDMA)
 			ap->udma_mask = 0;
 	}
 	ap->flags |= ATA_FLAG_PIO_POLLING | ATA_FLAG_NO_ATAPI;
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index b0fe393c882c..371cc66f1a0e 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -1139,6 +1139,35 @@ err_no_rxchan:
 	return -ENODEV;
 }
 
+static int pl022_dma_autoprobe(struct pl022 *pl022)
+{
+	struct device *dev = &pl022->adev->dev;
+
+	/* automatically configure DMA channels from platform, normally using DT */
+	pl022->dma_rx_channel = dma_request_slave_channel(dev, "rx");
+	if (!pl022->dma_rx_channel)
+		goto err_no_rxchan;
+
+	pl022->dma_tx_channel = dma_request_slave_channel(dev, "tx");
+	if (!pl022->dma_tx_channel)
+		goto err_no_txchan;
+
+	pl022->dummypage = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!pl022->dummypage)
+		goto err_no_dummypage;
+
+	return 0;
+
+err_no_dummypage:
+	dma_release_channel(pl022->dma_tx_channel);
+	pl022->dma_tx_channel = NULL;
+err_no_txchan:
+	dma_release_channel(pl022->dma_rx_channel);
+	pl022->dma_rx_channel = NULL;
+err_no_rxchan:
+	return -ENODEV;
+}
+		
 static void terminate_dma(struct pl022 *pl022)
 {
 	struct dma_chan *rxchan = pl022->dma_rx_channel;
@@ -1167,6 +1196,11 @@ static inline int configure_dma(struct pl022 *pl022)
 	return -ENODEV;
 }
 
+static inline int pl022_dma_autoprobe(struct pl022 *pl022)
+{
+	return 0;
+}
+
 static inline int pl022_dma_probe(struct pl022 *pl022)
 {
 	return 0;
@@ -2226,8 +2260,13 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id)
 		goto err_no_irq;
 	}
 
-	/* Get DMA channels */
-	if (platform_info->enable_dma) {
+	/* Get DMA channels, try autoconfiguration first */
+	status = pl022_dma_autoprobe(pl022);
+
+	/* If that failed, use channels from platform_info */
+	if (status == 0)
+		platform_info->enable_dma = 1;
+	else if (platform_info->enable_dma) {
 		status = pl022_dma_probe(pl022);
 		if (status != 0)
 			platform_info->enable_dma = 0;
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 3ea5408fcbeb..c25b00ef9dbb 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -245,7 +245,7 @@ static void pl011_sgbuf_free(struct dma_chan *chan, struct pl011_sgbuf *sg,
 	}
 }
 
-static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
+static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port *uap)
 {
 	/* DMA is the sole user of the platform data right now */
 	struct amba_pl011_data *plat = uap->port.dev->platform_data;
@@ -259,20 +259,25 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
 	struct dma_chan *chan;
 	dma_cap_mask_t mask;
 
-	/* We need platform data */
-	if (!plat || !plat->dma_filter) {
-		dev_info(uap->port.dev, "no DMA platform data\n");
-		return;
-	}
+	chan = dma_request_slave_channel(dev, "tx");
 
-	/* Try to acquire a generic DMA engine slave TX channel */
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-
-	chan = dma_request_channel(mask, plat->dma_filter, plat->dma_tx_param);
 	if (!chan) {
-		dev_err(uap->port.dev, "no TX DMA channel!\n");
-		return;
+		/* We need platform data */
+		if (!plat || !plat->dma_filter) {
+			dev_info(uap->port.dev, "no DMA platform data\n");
+			return;
+		}
+
+		/* Try to acquire a generic DMA engine slave TX channel */
+		dma_cap_zero(mask);
+		dma_cap_set(DMA_SLAVE, mask);
+
+		chan = dma_request_channel(mask, plat->dma_filter,
+						plat->dma_tx_param);
+		if (!chan) {
+			dev_err(uap->port.dev, "no TX DMA channel!\n");
+			return;
+		}
 	}
 
 	dmaengine_slave_config(chan, &tx_conf);
@@ -282,7 +287,18 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
 		 dma_chan_name(uap->dmatx.chan));
 
 	/* Optionally make use of an RX channel as well */
-	if (plat->dma_rx_param) {
+	chan = dma_request_slave_channel(dev, "rx");
+	
+	if (!chan && plat->dma_rx_param) {
+		chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param);
+
+		if (!chan) {
+			dev_err(uap->port.dev, "no RX DMA channel!\n");
+			return;
+		}
+	}
+
+	if (chan) {
 		struct dma_slave_config rx_conf = {
 			.src_addr = uap->port.mapbase + UART01x_DR,
 			.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
@@ -291,12 +307,6 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
 			.device_fc = false,
 		};
 
-		chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param);
-		if (!chan) {
-			dev_err(uap->port.dev, "no RX DMA channel!\n");
-			return;
-		}
-
 		dmaengine_slave_config(chan, &rx_conf);
 		uap->dmarx.chan = chan;
 
@@ -315,6 +325,7 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
 struct dma_uap {
 	struct list_head node;
 	struct uart_amba_port *uap;
+	struct device *dev;
 };
 
 static LIST_HEAD(pl011_dma_uarts);
@@ -325,7 +336,7 @@ static int __init pl011_dma_initcall(void)
 
 	list_for_each_safe(node, tmp, &pl011_dma_uarts) {
 		struct dma_uap *dmau = list_entry(node, struct dma_uap, node);
-		pl011_dma_probe_initcall(dmau->uap);
+		pl011_dma_probe_initcall(dmau->dev, dmau->uap);
 		list_del(node);
 		kfree(dmau);
 	}
@@ -334,18 +345,19 @@ static int __init pl011_dma_initcall(void)
 
 device_initcall(pl011_dma_initcall);
 
-static void pl011_dma_probe(struct uart_amba_port *uap)
+static void pl011_dma_probe(struct device *dev, struct uart_amba_port *uap)
 {
 	struct dma_uap *dmau = kzalloc(sizeof(struct dma_uap), GFP_KERNEL);
 	if (dmau) {
 		dmau->uap = uap;
+		dmau->dev = dev;
 		list_add_tail(&dmau->node, &pl011_dma_uarts);
 	}
 }
 #else
-static void pl011_dma_probe(struct uart_amba_port *uap)
+static void pl011_dma_probe(struct device *dev, struct uart_amba_port *uap)
 {
-	pl011_dma_probe_initcall(uap);
+	pl011_dma_probe_initcall(dev, uap);
 }
 #endif
 
@@ -2020,7 +2032,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 	uap->port.ops = &amba_pl011_pops;
 	uap->port.flags = UPF_BOOT_AUTOCONF;
 	uap->port.line = i;
-	pl011_dma_probe(uap);
+	pl011_dma_probe(&dev->dev, uap);
 
 	/* Ensure interrupts from this UART are masked and cleared */
 	writew(0, uap->port.membase + UART011_IMSC);
diff --git a/include/linux/pata_arasan_cf_data.h b/include/linux/pata_arasan_cf_data.h
index a7b4fc386e63..3cc21c9cc1e8 100644
--- a/include/linux/pata_arasan_cf_data.h
+++ b/include/linux/pata_arasan_cf_data.h
@@ -37,8 +37,6 @@ struct arasan_cf_pdata {
 	#define CF_BROKEN_PIO			(1)
 	#define CF_BROKEN_MWDMA			(1 << 1)
 	#define CF_BROKEN_UDMA			(1 << 2)
-	/* This is platform specific data for the DMA controller */
-	void *dma_priv;
 };
 
 static inline void