summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2016-02-19 21:51:18 +0100
committerDavid S. Miller <davem@davemloft.net>2016-02-19 21:51:18 +0100
commit0b7662cf97ee41af03bc8d4498ff4100d0843338 (patch)
tree191057f0730adbe23353333745e3684edb3bf8dc
parentcxgb3: fix up vpd strings for kstrto*() (diff)
parentMerge tag 'iwlwifi-for-kalle-2016-02-15' of https://git.kernel.org/pub/scm/li... (diff)
downloadlinux-0b7662cf97ee41af03bc8d4498ff4100d0843338.tar.xz
linux-0b7662cf97ee41af03bc8d4498ff4100d0843338.zip
Merge tag 'wireless-drivers-for-davem-2016-02-18' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says: ==================== rtlwifi * fix broken VHT (802.11ac) support, reported by Linus wlcore * fix firmware initialisation regression on wl1271 iwlwifi * fix a race that users reported when we try to load the firmware and the hardware rfkill interrupt triggers at the same time * fix a very visible bug in scheduled scan: the firmware doesn't support scheduled scan with no profile configured and the supplicant sometimes requests such scheduled scans * build system fix to be able to link iwlwifi statically into kernel * firmware name update for 8265 * typo fix in return value ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/wireless/intel/iwlwifi/Kconfig1
-rw-r--r--drivers/net/wireless/intel/iwlwifi/iwl-8000.c42
-rw-r--r--drivers/net/wireless/intel/iwlwifi/iwl-drv.c6
-rw-r--r--drivers/net/wireless/intel/iwlwifi/mvm/scan.c4
-rw-r--r--drivers/net/wireless/intel/iwlwifi/pcie/internal.h9
-rw-r--r--drivers/net/wireless/intel/iwlwifi/pcie/rx.c8
-rw-r--r--drivers/net/wireless/intel/iwlwifi/pcie/trans.c188
-rw-r--r--drivers/net/wireless/realtek/rtlwifi/rc.c5
-rw-r--r--drivers/net/wireless/ti/wlcore/io.c8
-rw-r--r--drivers/net/wireless/ti/wlcore/io.h4
10 files changed, 175 insertions, 100 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/Kconfig b/drivers/net/wireless/intel/iwlwifi/Kconfig
index 866067789330..7438fbeef744 100644
--- a/drivers/net/wireless/intel/iwlwifi/Kconfig
+++ b/drivers/net/wireless/intel/iwlwifi/Kconfig
@@ -53,7 +53,6 @@ config IWLWIFI_LEDS
config IWLDVM
tristate "Intel Wireless WiFi DVM Firmware support"
- depends on m
help
This is the driver that supports the DVM firmware. The list
of the devices that use this firmware is available here:
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-8000.c b/drivers/net/wireless/intel/iwlwifi/iwl-8000.c
index c84a0299d43e..bce9b3420a13 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-8000.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-8000.c
@@ -7,6 +7,7 @@
*
* Copyright(c) 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2014 - 2015 Intel Mobile Communications GmbH
+ * Copyright(c) 2016 Intel Deutschland GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -70,12 +71,15 @@
/* Highest firmware API version supported */
#define IWL8000_UCODE_API_MAX 20
+#define IWL8265_UCODE_API_MAX 20
/* Oldest version we won't warn about */
#define IWL8000_UCODE_API_OK 13
+#define IWL8265_UCODE_API_OK 20
/* Lowest firmware API version supported */
#define IWL8000_UCODE_API_MIN 13
+#define IWL8265_UCODE_API_MIN 20
/* NVM versions */
#define IWL8000_NVM_VERSION 0x0a1d
@@ -93,6 +97,10 @@
#define IWL8000_MODULE_FIRMWARE(api) \
IWL8000_FW_PRE "-" __stringify(api) ".ucode"
+#define IWL8265_FW_PRE "iwlwifi-8265-"
+#define IWL8265_MODULE_FIRMWARE(api) \
+ IWL8265_FW_PRE __stringify(api) ".ucode"
+
#define NVM_HW_SECTION_NUM_FAMILY_8000 10
#define DEFAULT_NVM_FILE_FAMILY_8000B "nvmData-8000B"
#define DEFAULT_NVM_FILE_FAMILY_8000C "nvmData-8000C"
@@ -144,10 +152,7 @@ static const struct iwl_tt_params iwl8000_tt_params = {
.support_tx_backoff = true,
};
-#define IWL_DEVICE_8000 \
- .ucode_api_max = IWL8000_UCODE_API_MAX, \
- .ucode_api_ok = IWL8000_UCODE_API_OK, \
- .ucode_api_min = IWL8000_UCODE_API_MIN, \
+#define IWL_DEVICE_8000_COMMON \
.device_family = IWL_DEVICE_FAMILY_8000, \
.max_inst_size = IWL60_RTC_INST_SIZE, \
.max_data_size = IWL60_RTC_DATA_SIZE, \
@@ -167,10 +172,28 @@ static const struct iwl_tt_params iwl8000_tt_params = {
.thermal_params = &iwl8000_tt_params, \
.apmg_not_supported = true
+#define IWL_DEVICE_8000 \
+ IWL_DEVICE_8000_COMMON, \
+ .ucode_api_max = IWL8000_UCODE_API_MAX, \
+ .ucode_api_ok = IWL8000_UCODE_API_OK, \
+ .ucode_api_min = IWL8000_UCODE_API_MIN \
+
+#define IWL_DEVICE_8260 \
+ IWL_DEVICE_8000_COMMON, \
+ .ucode_api_max = IWL8000_UCODE_API_MAX, \
+ .ucode_api_ok = IWL8000_UCODE_API_OK, \
+ .ucode_api_min = IWL8000_UCODE_API_MIN \
+
+#define IWL_DEVICE_8265 \
+ IWL_DEVICE_8000_COMMON, \
+ .ucode_api_max = IWL8265_UCODE_API_MAX, \
+ .ucode_api_ok = IWL8265_UCODE_API_OK, \
+ .ucode_api_min = IWL8265_UCODE_API_MIN \
+
const struct iwl_cfg iwl8260_2n_cfg = {
.name = "Intel(R) Dual Band Wireless N 8260",
.fw_name_pre = IWL8000_FW_PRE,
- IWL_DEVICE_8000,
+ IWL_DEVICE_8260,
.ht_params = &iwl8000_ht_params,
.nvm_ver = IWL8000_NVM_VERSION,
.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
@@ -179,7 +202,7 @@ const struct iwl_cfg iwl8260_2n_cfg = {
const struct iwl_cfg iwl8260_2ac_cfg = {
.name = "Intel(R) Dual Band Wireless AC 8260",
.fw_name_pre = IWL8000_FW_PRE,
- IWL_DEVICE_8000,
+ IWL_DEVICE_8260,
.ht_params = &iwl8000_ht_params,
.nvm_ver = IWL8000_NVM_VERSION,
.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
@@ -188,8 +211,8 @@ const struct iwl_cfg iwl8260_2ac_cfg = {
const struct iwl_cfg iwl8265_2ac_cfg = {
.name = "Intel(R) Dual Band Wireless AC 8265",
- .fw_name_pre = IWL8000_FW_PRE,
- IWL_DEVICE_8000,
+ .fw_name_pre = IWL8265_FW_PRE,
+ IWL_DEVICE_8265,
.ht_params = &iwl8000_ht_params,
.nvm_ver = IWL8000_NVM_VERSION,
.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
@@ -209,7 +232,7 @@ const struct iwl_cfg iwl4165_2ac_cfg = {
const struct iwl_cfg iwl8260_2ac_sdio_cfg = {
.name = "Intel(R) Dual Band Wireless-AC 8260",
.fw_name_pre = IWL8000_FW_PRE,
- IWL_DEVICE_8000,
+ IWL_DEVICE_8260,
.ht_params = &iwl8000_ht_params,
.nvm_ver = IWL8000_NVM_VERSION,
.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
@@ -236,3 +259,4 @@ const struct iwl_cfg iwl4165_2ac_sdio_cfg = {
};
MODULE_FIRMWARE(IWL8000_MODULE_FIRMWARE(IWL8000_UCODE_API_OK));
+MODULE_FIRMWARE(IWL8265_MODULE_FIRMWARE(IWL8265_UCODE_API_OK));
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
index 7acb49075683..ab4c2a0470b2 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
@@ -243,8 +243,10 @@ static int iwl_request_firmware(struct iwl_drv *drv, bool first)
if (drv->trans->cfg->device_family == IWL_DEVICE_FAMILY_8000) {
char rev_step = 'A' + CSR_HW_REV_STEP(drv->trans->hw_rev);
- snprintf(drv->firmware_name, sizeof(drv->firmware_name),
- "%s%c-%s.ucode", name_pre, rev_step, tag);
+ if (rev_step != 'A')
+ snprintf(drv->firmware_name,
+ sizeof(drv->firmware_name), "%s%c-%s.ucode",
+ name_pre, rev_step, tag);
}
IWL_DEBUG_INFO(drv, "attempting to load firmware %s'%s'\n",
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
index 9a15642f80dd..ea1e177c2ea1 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
@@ -1298,6 +1298,10 @@ int iwl_mvm_sched_scan_start(struct iwl_mvm *mvm,
return -EBUSY;
}
+ /* we don't support "match all" in the firmware */
+ if (!req->n_match_sets)
+ return -EOPNOTSUPP;
+
ret = iwl_mvm_check_running_scans(mvm, type);
if (ret)
return ret;
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/internal.h b/drivers/net/wireless/intel/iwlwifi/pcie/internal.h
index cc3888e2700d..73c95594eabe 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/internal.h
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/internal.h
@@ -490,6 +490,15 @@ static inline void iwl_enable_interrupts(struct iwl_trans *trans)
iwl_write32(trans, CSR_INT_MASK, trans_pcie->inta_mask);
}
+static inline void iwl_enable_fw_load_int(struct iwl_trans *trans)
+{
+ struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
+
+ IWL_DEBUG_ISR(trans, "Enabling FW load interrupt\n");
+ trans_pcie->inta_mask = CSR_INT_BIT_FH_TX;
+ iwl_write32(trans, CSR_INT_MASK, trans_pcie->inta_mask);
+}
+
static inline void iwl_enable_rfkill_int(struct iwl_trans *trans)
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
index ccafbd8cf4b3..152cf9ad9566 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
@@ -1438,9 +1438,11 @@ irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id)
inta & ~trans_pcie->inta_mask);
}
- /* Re-enable all interrupts */
- /* only Re-enable if disabled by irq */
- if (test_bit(STATUS_INT_ENABLED, &trans->status))
+ /* we are loading the firmware, enable FH_TX interrupt only */
+ if (handled & CSR_INT_BIT_FH_TX)
+ iwl_enable_fw_load_int(trans);
+ /* only Re-enable all interrupt if disabled by irq */
+ else if (test_bit(STATUS_INT_ENABLED, &trans->status))
iwl_enable_interrupts(trans);
/* Re-enable RF_KILL if it occurred */
else if (handled & CSR_INT_BIT_RF_KILL)
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
index d60a467a983c..5a854c609477 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
@@ -1021,82 +1021,6 @@ static int iwl_pcie_load_given_ucode_8000(struct iwl_trans *trans,
&first_ucode_section);
}
-static int iwl_trans_pcie_start_fw(struct iwl_trans *trans,
- const struct fw_img *fw, bool run_in_rfkill)
-{
- struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
- bool hw_rfkill;
- int ret;
-
- mutex_lock(&trans_pcie->mutex);
-
- /* Someone called stop_device, don't try to start_fw */
- if (trans_pcie->is_down) {
- IWL_WARN(trans,
- "Can't start_fw since the HW hasn't been started\n");
- ret = EIO;
- goto out;
- }
-
- /* This may fail if AMT took ownership of the device */
- if (iwl_pcie_prepare_card_hw(trans)) {
- IWL_WARN(trans, "Exit HW not ready\n");
- ret = -EIO;
- goto out;
- }
-
- iwl_enable_rfkill_int(trans);
-
- /* If platform's RF_KILL switch is NOT set to KILL */
- hw_rfkill = iwl_is_rfkill_set(trans);
- if (hw_rfkill)
- set_bit(STATUS_RFKILL, &trans->status);
- else
- clear_bit(STATUS_RFKILL, &trans->status);
- iwl_trans_pcie_rf_kill(trans, hw_rfkill);
- if (hw_rfkill && !run_in_rfkill) {
- ret = -ERFKILL;
- goto out;
- }
-
- iwl_write32(trans, CSR_INT, 0xFFFFFFFF);
-
- ret = iwl_pcie_nic_init(trans);
- if (ret) {
- IWL_ERR(trans, "Unable to init nic\n");
- goto out;
- }
-
- /* make sure rfkill handshake bits are cleared */
- iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
- iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR,
- CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-
- /* clear (again), then enable host interrupts */
- iwl_write32(trans, CSR_INT, 0xFFFFFFFF);
- iwl_enable_interrupts(trans);
-
- /* really make sure rfkill handshake bits are cleared */
- iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
- iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-
- /* Load the given image to the HW */
- if (trans->cfg->device_family == IWL_DEVICE_FAMILY_8000)
- ret = iwl_pcie_load_given_ucode_8000(trans, fw);
- else
- ret = iwl_pcie_load_given_ucode(trans, fw);
-
-out:
- mutex_unlock(&trans_pcie->mutex);
- return ret;
-}
-
-static void iwl_trans_pcie_fw_alive(struct iwl_trans *trans, u32 scd_addr)
-{
- iwl_pcie_reset_ict(trans);
- iwl_pcie_tx_start(trans, scd_addr);
-}
-
static void _iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power)
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
@@ -1127,7 +1051,8 @@ static void _iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power)
* already dead.
*/
if (test_and_clear_bit(STATUS_DEVICE_ENABLED, &trans->status)) {
- IWL_DEBUG_INFO(trans, "DEVICE_ENABLED bit was set and is now cleared\n");
+ IWL_DEBUG_INFO(trans,
+ "DEVICE_ENABLED bit was set and is now cleared\n");
iwl_pcie_tx_stop(trans);
iwl_pcie_rx_stop(trans);
@@ -1161,7 +1086,6 @@ static void _iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power)
iwl_disable_interrupts(trans);
spin_unlock(&trans_pcie->irq_lock);
-
/* clear all status bits */
clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status);
clear_bit(STATUS_INT_ENABLED, &trans->status);
@@ -1194,10 +1118,116 @@ static void _iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power)
if (hw_rfkill != was_hw_rfkill)
iwl_trans_pcie_rf_kill(trans, hw_rfkill);
- /* re-take ownership to prevent other users from stealing the deivce */
+ /* re-take ownership to prevent other users from stealing the device */
iwl_pcie_prepare_card_hw(trans);
}
+static int iwl_trans_pcie_start_fw(struct iwl_trans *trans,
+ const struct fw_img *fw, bool run_in_rfkill)
+{
+ struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
+ bool hw_rfkill;
+ int ret;
+
+ /* This may fail if AMT took ownership of the device */
+ if (iwl_pcie_prepare_card_hw(trans)) {
+ IWL_WARN(trans, "Exit HW not ready\n");
+ ret = -EIO;
+ goto out;
+ }
+
+ iwl_enable_rfkill_int(trans);
+
+ iwl_write32(trans, CSR_INT, 0xFFFFFFFF);
+
+ /*
+ * We enabled the RF-Kill interrupt and the handler may very
+ * well be running. Disable the interrupts to make sure no other
+ * interrupt can be fired.
+ */
+ iwl_disable_interrupts(trans);
+
+ /* Make sure it finished running */
+ synchronize_irq(trans_pcie->pci_dev->irq);
+
+ mutex_lock(&trans_pcie->mutex);
+
+ /* If platform's RF_KILL switch is NOT set to KILL */
+ hw_rfkill = iwl_is_rfkill_set(trans);
+ if (hw_rfkill)
+ set_bit(STATUS_RFKILL, &trans->status);
+ else
+ clear_bit(STATUS_RFKILL, &trans->status);
+ iwl_trans_pcie_rf_kill(trans, hw_rfkill);
+ if (hw_rfkill && !run_in_rfkill) {
+ ret = -ERFKILL;
+ goto out;
+ }
+
+ /* Someone called stop_device, don't try to start_fw */
+ if (trans_pcie->is_down) {
+ IWL_WARN(trans,
+ "Can't start_fw since the HW hasn't been started\n");
+ ret = -EIO;
+ goto out;
+ }
+
+ /* make sure rfkill handshake bits are cleared */
+ iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+ iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR,
+ CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
+
+ /* clear (again), then enable host interrupts */
+ iwl_write32(trans, CSR_INT, 0xFFFFFFFF);
+
+ ret = iwl_pcie_nic_init(trans);
+ if (ret) {
+ IWL_ERR(trans, "Unable to init nic\n");
+ goto out;
+ }
+
+ /*
+ * Now, we load the firmware and don't want to be interrupted, even
+ * by the RF-Kill interrupt (hence mask all the interrupt besides the
+ * FH_TX interrupt which is needed to load the firmware). If the
+ * RF-Kill switch is toggled, we will find out after having loaded
+ * the firmware and return the proper value to the caller.
+ */
+ iwl_enable_fw_load_int(trans);
+
+ /* really make sure rfkill handshake bits are cleared */
+ iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+ iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+
+ /* Load the given image to the HW */
+ if (trans->cfg->device_family == IWL_DEVICE_FAMILY_8000)
+ ret = iwl_pcie_load_given_ucode_8000(trans, fw);
+ else
+ ret = iwl_pcie_load_given_ucode(trans, fw);
+ iwl_enable_interrupts(trans);
+
+ /* re-check RF-Kill state since we may have missed the interrupt */
+ hw_rfkill = iwl_is_rfkill_set(trans);
+ if (hw_rfkill)
+ set_bit(STATUS_RFKILL, &trans->status);
+ else
+ clear_bit(STATUS_RFKILL, &trans->status);
+
+ iwl_trans_pcie_rf_kill(trans, hw_rfkill);
+ if (hw_rfkill && !run_in_rfkill)
+ ret = -ERFKILL;
+
+out:
+ mutex_unlock(&trans_pcie->mutex);
+ return ret;
+}
+
+static void iwl_trans_pcie_fw_alive(struct iwl_trans *trans, u32 scd_addr)
+{
+ iwl_pcie_reset_ict(trans);
+ iwl_pcie_tx_start(trans, scd_addr);
+}
+
static void iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power)
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
diff --git a/drivers/net/wireless/realtek/rtlwifi/rc.c b/drivers/net/wireless/realtek/rtlwifi/rc.c
index 74c14ce28238..28f7010e7108 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rc.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rc.c
@@ -138,6 +138,11 @@ static void _rtl_rc_rate_set_series(struct rtl_priv *rtlpriv,
((wireless_mode == WIRELESS_MODE_N_5G) ||
(wireless_mode == WIRELESS_MODE_N_24G)))
rate->flags |= IEEE80211_TX_RC_MCS;
+ if (sta && sta->vht_cap.vht_supported &&
+ (wireless_mode == WIRELESS_MODE_AC_5G ||
+ wireless_mode == WIRELESS_MODE_AC_24G ||
+ wireless_mode == WIRELESS_MODE_AC_ONLY))
+ rate->flags |= IEEE80211_TX_RC_VHT_MCS;
}
}
diff --git a/drivers/net/wireless/ti/wlcore/io.c b/drivers/net/wireless/ti/wlcore/io.c
index 9ac118e727e9..564ca750c5ee 100644
--- a/drivers/net/wireless/ti/wlcore/io.c
+++ b/drivers/net/wireless/ti/wlcore/io.c
@@ -175,14 +175,14 @@ int wlcore_set_partition(struct wl1271 *wl,
if (ret < 0)
goto out;
+ /* We don't need the size of the last partition, as it is
+ * automatically calculated based on the total memory size and
+ * the sizes of the previous partitions.
+ */
ret = wlcore_raw_write32(wl, HW_PART3_START_ADDR, p->mem3.start);
if (ret < 0)
goto out;
- ret = wlcore_raw_write32(wl, HW_PART3_SIZE_ADDR, p->mem3.size);
- if (ret < 0)
- goto out;
-
out:
return ret;
}
diff --git a/drivers/net/wireless/ti/wlcore/io.h b/drivers/net/wireless/ti/wlcore/io.h
index 6c257b54f415..10cf3747694d 100644
--- a/drivers/net/wireless/ti/wlcore/io.h
+++ b/drivers/net/wireless/ti/wlcore/io.h
@@ -36,8 +36,8 @@
#define HW_PART1_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 12)
#define HW_PART2_SIZE_ADDR (HW_PARTITION_REGISTERS_ADDR + 16)
#define HW_PART2_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 20)
-#define HW_PART3_SIZE_ADDR (HW_PARTITION_REGISTERS_ADDR + 24)
-#define HW_PART3_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 28)
+#define HW_PART3_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 24)
+
#define HW_ACCESS_REGISTER_SIZE 4
#define HW_ACCESS_PRAM_MAX_RANGE 0x3c000