[ARM] 5280/1: pxa: prepare cm-x2xx.c and cm-x2xx-pci.[ch] for addition of CM-X255

- Change CM-X255 and CM-X270 common function prefix from cmx270 to cmx2xx
- Split cmx2xx_init to common and CM-X270-specific parts
- Use dynamic assignement for DM9000 resources and led GPIOs.

Signed-off-by: Russ Dill <russ.dill@gmail.com>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

4 files changed, 126 insertions, 117 deletions

diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index 2d5bcea1e520..b6e93ecbf9da 100644
--- a/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-pxa/cm-x270-pci.c
+ * linux/arch/arm/mach-pxa/cm-x2xx-pci.c
  *
  * PCI bios-type initialisation for PCI machines
  *
@@ -28,7 +28,7 @@
 #include <asm/hardware/it8152.h>
 
 unsigned long it8152_base_address;
-static int cmx270_it8152_irq_gpio;
+static int cmx2xx_it8152_irq_gpio;
 
 /*
  * Only first 64MB of memory can be accessed via PCI.
@@ -36,13 +36,13 @@ static int cmx270_it8152_irq_gpio;
  * This is really ugly and we need a better way of specifying
  * DMA-capable regions of memory.
  */
-void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
+void __init cmx2xx_pci_adjust_zones(int node, unsigned long *zone_size,
 	unsigned long *zhole_size)
 {
 	unsigned int sz = SZ_64M >> PAGE_SHIFT;
 
 	if (machine_is_armcore()) {
-		pr_info("Adjusting zones for CM-X270\n");
+		pr_info("Adjusting zones for CM-X2XX\n");
 
 		/*
 		 * Only adjust if > 64M on current system
@@ -57,29 +57,29 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
 	}
 }
 
-static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
+static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
 	/* clear our parent irq */
-	GEDR(cmx270_it8152_irq_gpio) = GPIO_bit(cmx270_it8152_irq_gpio);
+	GEDR(cmx2xx_it8152_irq_gpio) = GPIO_bit(cmx2xx_it8152_irq_gpio);
 
 	it8152_irq_demux(irq, desc);
 }
 
-void __cmx270_pci_init_irq(int irq_gpio)
+void __cmx2xx_pci_init_irq(int irq_gpio)
 {
 	it8152_init_irq();
 
-	cmx270_it8152_irq_gpio = irq_gpio;
+	cmx2xx_it8152_irq_gpio = irq_gpio;
 
 	set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING);
 
-	set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux);
+	set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx2xx_it8152_irq_demux);
 }
 
 #ifdef CONFIG_PM
 static unsigned long sleep_save_ite[10];
 
-void __cmx270_pci_suspend(void)
+void __cmx2xx_pci_suspend(void)
 {
 	/* save ITE state */
 	sleep_save_ite[0] = __raw_readl(IT8152_INTC_PDCNIMR);
@@ -91,7 +91,7 @@ void __cmx270_pci_suspend(void)
 	__raw_writel((0), IT8152_INTC_LPCNIRR);
 }
 
-void __cmx270_pci_resume(void)
+void __cmx2xx_pci_resume(void)
 {
 	/* restore IT8152 state */
 	__raw_writel((sleep_save_ite[0]), IT8152_INTC_PDCNIMR);
@@ -99,12 +99,12 @@ void __cmx270_pci_resume(void)
 	__raw_writel((sleep_save_ite[2]), IT8152_INTC_LPNIAR);
 }
 #else
-void cmx270_pci_suspend(void) {}
-void cmx270_pci_resume(void) {}
+void cmx2xx_pci_suspend(void) {}
+void cmx2xx_pci_resume(void) {}
 #endif
 
 /* PCI IRQ mapping*/
-static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init cmx2xx_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;
 
@@ -116,14 +116,14 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 
 	/*
 	  Here comes the ugly part. The routing is baseboard specific,
-	  but defining a platform for each possible base of CM-X270 is
-	  unrealistic. Here we keep mapping for ATXBase and SB-X270.
+	  but defining a platform for each possible base of CM-X2XX is
+	  unrealistic. Here we keep mapping for ATXBase and SB-X2XX.
 	*/
 	/* ATXBASE PCI slot */
 	if (slot == 7)
 		return IT8152_PCI_INTA;
 
-	/* ATXBase/SB-x270 CardBus */
+	/* ATXBase/SB-X2XX CardBus */
 	if (slot == 8 || slot == 0)
 		return IT8152_PCI_INTB;
 
@@ -144,9 +144,9 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	return(0);
 }
 
-static void cmx270_pci_preinit(void)
+static void cmx2xx_pci_preinit(void)
 {
-	pr_info("Initializing CM-X270 PCI subsystem\n");
+	pr_info("Initializing CM-X2XX PCI subsystem\n");
 
 	__raw_writel(0x800, IT8152_PCI_CFG_ADDR);
 	if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) {
@@ -200,21 +200,21 @@ static void cmx270_pci_preinit(void)
 	}
 }
 
-static struct hw_pci cmx270_pci __initdata = {
+static struct hw_pci cmx2xx_pci __initdata = {
 	.swizzle	= pci_std_swizzle,
-	.map_irq	= cmx270_pci_map_irq,
+	.map_irq	= cmx2xx_pci_map_irq,
 	.nr_controllers	= 1,
 	.setup		= it8152_pci_setup,
 	.scan		= it8152_pci_scan_bus,
-	.preinit	= cmx270_pci_preinit,
+	.preinit	= cmx2xx_pci_preinit,
 };
 
-static int __init cmx270_init_pci(void)
+static int __init cmx2xx_init_pci(void)
 {
 	if (machine_is_armcore())
-		pci_common_init(&cmx270_pci);
+		pci_common_init(&cmx2xx_pci);
 
 	return 0;
 }
 
-subsys_initcall(cmx270_init_pci);
+subsys_initcall(cmx2xx_init_pci);
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.h b/arch/arm/mach-pxa/cm-x2xx-pci.h
index 48f532f4cb51..e24aad2e3ad7 100644
--- a/arch/arm/mach-pxa/cm-x2xx-pci.h
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.h
@@ -1,13 +1,13 @@
-extern void __cmx270_pci_init_irq(int irq_gpio);
-extern void __cmx270_pci_suspend(void);
-extern void __cmx270_pci_resume(void);
+extern void __cmx2xx_pci_init_irq(int irq_gpio);
+extern void __cmx2xx_pci_suspend(void);
+extern void __cmx2xx_pci_resume(void);
 
 #ifdef CONFIG_PCI
-#define cmx270_pci_init_irq(x) __cmx270_pci_init_irq(x)
-#define cmx270_pci_suspend(x) __cmx270_pci_suspend(x)
-#define cmx270_pci_resume(x) __cmx270_pci_resume(x)
+#define cmx2xx_pci_init_irq(x) __cmx2xx_pci_init_irq(x)
+#define cmx2xx_pci_suspend(x) __cmx2xx_pci_suspend(x)
+#define cmx2xx_pci_resume(x) __cmx2xx_pci_resume(x)
 #else
-#define cmx270_pci_init_irq(x) do {} while (0)
-#define cmx270_pci_suspend(x) do {} while (0)
-#define cmx270_pci_resume(x) do {} while (0)
+#define cmx2xx_pci_init_irq(x) do {} while (0)
+#define cmx2xx_pci_suspend(x) do {} while (0)
+#define cmx2xx_pci_resume(x) do {} while (0)
 #endif
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index 598837798425..cc79005b1794 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-pxa/cm-x270.c
+ * linux/arch/arm/mach-pxa/cm-x2xx.c
  *
  * Copyright (C) 2007, 2008 CompuLab, Ltd.
  * Mike Rapoport <mike@compulab.co.il>
@@ -38,20 +38,23 @@
 #include "cm-x2xx-pci.h"
 
 /* virtual addresses for statically mapped regions */
-#define CMX270_VIRT_BASE	(0xe8000000)
-#define CMX270_IT8152_VIRT	(CMX270_VIRT_BASE)
+#define CMX2XX_VIRT_BASE	(0xe8000000)
+#define CMX2XX_IT8152_VIRT	(CMX2XX_VIRT_BASE)
 
 #define RTC_PHYS_BASE		(PXA_CS1_PHYS + (5 << 22))
-#define DM9000_PHYS_BASE	(PXA_CS1_PHYS + (6 << 22))
+#define CMX270_DM9000_PHYS_BASE	(PXA_CS1_PHYS + (6 << 22))
+
+/* leds */
+#define CMX270_GPIO_RED		(93)
+#define CMX270_GPIO_GREEN	(94)
 
 /* GPIO IRQ usage */
 #define GPIO10_ETHIRQ		(10)
-#define GPIO22_IT8152_IRQ	(22)
+#define CMX270_GPIO_IT8152_IRQ	(22)
 #define GPIO83_MMC_IRQ		(83)
 #define GPIO95_GFXIRQ		(95)
 
 #define CMX270_ETHIRQ		IRQ_GPIO(GPIO10_ETHIRQ)
-#define CMX270_IT8152_IRQ	IRQ_GPIO(GPIO22_IT8152_IRQ)
 #define CMX270_MMC_IRQ		IRQ_GPIO(GPIO83_MMC_IRQ)
 #define CMX270_GFXIRQ		IRQ_GPIO(GPIO95_GFXIRQ)
 
@@ -160,13 +163,13 @@ static unsigned long cmx270_pin_config[] = {
 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
 static struct resource cmx270_dm9000_resource[] = {
 	[0] = {
-		.start = DM9000_PHYS_BASE,
-		.end   = DM9000_PHYS_BASE + 4,
+		.start = CMX270_DM9000_PHYS_BASE,
+		.end   = CMX270_DM9000_PHYS_BASE + 3,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start = DM9000_PHYS_BASE + 8,
-		.end   = DM9000_PHYS_BASE + 8 + 500,
+		.start = CMX270_DM9000_PHYS_BASE + 8,
+		.end   = CMX270_DM9000_PHYS_BASE + 8 + 500,
 		.flags = IORESOURCE_MEM,
 	},
 	[2] = {
@@ -180,37 +183,37 @@ static struct dm9000_plat_data cmx270_dm9000_platdata = {
 	.flags		= DM9000_PLATF_32BITONLY,
 };
 
-static struct platform_device cmx270_dm9000_device = {
+static struct platform_device cmx2xx_dm9000_device = {
 	.name		= "dm9000",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(cmx270_dm9000_resource),
-	.resource	= cmx270_dm9000_resource,
 	.dev		= {
 		.platform_data = &cmx270_dm9000_platdata,
 	}
 };
 
-static void __init cmx270_init_dm9000(void)
+static void __init cmx2xx_init_dm9000(void)
 {
-	platform_device_register(&cmx270_dm9000_device);
+	cmx2xx_dm9000_device.resource = cmx270_dm9000_resource,
+	platform_device_register(&cmx2xx_dm9000_device);
 }
 #else
-static inline void cmx270_init_dm9000(void) {}
+static inline void cmx2xx_init_dm9000(void) {}
 #endif
 
 /* UCB1400 touchscreen controller */
 #if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static struct platform_device cmx270_ts_device = {
+static struct platform_device cmx2xx_ts_device = {
 	.name		= "ucb1400_ts",
 	.id		= -1,
 };
 
-static void __init cmx270_init_touchscreen(void)
+static void __init cmx2xx_init_touchscreen(void)
 {
-	platform_device_register(&cmx270_ts_device);
+	platform_device_register(&cmx2xx_ts_device);
 }
 #else
-static inline void cmx270_init_touchscreen(void) {}
+static inline void cmx2xx_init_touchscreen(void) {}
 #endif
 
 /* V3020 RTC */
@@ -242,45 +245,45 @@ static void __init cmx270_init_rtc(void)
 	platform_device_register(&cmx270_rtc_device);
 }
 #else
-static inline void cmx270_init_rtc(void) {}
+static inline void cmx2xx_init_rtc(void) {}
 #endif
 
 /* CM-X270 LEDs */
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led cmx270_leds[] = {
+static struct gpio_led cmx2xx_leds[] = {
 	[0] = {
-		.name = "cm-x270:red",
+		.name = "cm-x2xx:red",
 		.default_trigger = "nand-disk",
-		.gpio = 93,
 		.active_low = 1,
 	},
 	[1] = {
-		.name = "cm-x270:green",
+		.name = "cm-x2xx:green",
 		.default_trigger = "heartbeat",
-		.gpio = 94,
 		.active_low = 1,
 	},
 };
 
-static struct gpio_led_platform_data cmx270_gpio_led_pdata = {
-	.num_leds = ARRAY_SIZE(cmx270_leds),
-	.leds = cmx270_leds,
+static struct gpio_led_platform_data cmx2xx_gpio_led_pdata = {
+	.num_leds = ARRAY_SIZE(cmx2xx_leds),
+	.leds = cmx2xx_leds,
 };
 
-static struct platform_device cmx270_led_device = {
+static struct platform_device cmx2xx_led_device = {
 	.name		= "leds-gpio",
 	.id		= -1,
 	.dev		= {
-		.platform_data = &cmx270_gpio_led_pdata,
+		.platform_data = &cmx2xx_gpio_led_pdata,
 	},
 };
 
-static void __init cmx270_init_leds(void)
+static void __init cmx2xx_init_leds(void)
 {
-	platform_device_register(&cmx270_led_device);
+	cmx2xx_leds[0].gpio = CMX270_GPIO_RED;
+	cmx2xx_leds[1].gpio = CMX270_GPIO_GREEN;
+	platform_device_register(&cmx2xx_led_device);
 }
 #else
-static inline void cmx270_init_leds(void) {}
+static inline void cmx2xx_init_leds(void) {}
 #endif
 
 /* 2700G graphics */
@@ -543,32 +546,32 @@ static struct pxafb_mach_info generic_stn_640x480 = {
 	.cmap_static	= 0,
 };
 
-static struct pxafb_mach_info *cmx270_display = &generic_crt_640x480;
+static struct pxafb_mach_info *cmx2xx_display = &generic_crt_640x480;
 
-static int __init cmx270_set_display(char *str)
+static int __init cmx2xx_set_display(char *str)
 {
 	int disp_type = simple_strtol(str, NULL, 0);
 	switch (disp_type) {
 	case MTYPE_STN320x240:
-		cmx270_display = &generic_stn_320x240;
+		cmx2xx_display = &generic_stn_320x240;
 		break;
 	case MTYPE_TFT640x480:
-		cmx270_display = &generic_tft_640x480;
+		cmx2xx_display = &generic_tft_640x480;
 		break;
 	case MTYPE_CRT640x480:
-		cmx270_display = &generic_crt_640x480;
+		cmx2xx_display = &generic_crt_640x480;
 		break;
 	case MTYPE_CRT800x600:
-		cmx270_display = &generic_crt_800x600;
+		cmx2xx_display = &generic_crt_800x600;
 		break;
 	case MTYPE_TFT320x240:
-		cmx270_display = &generic_tft_320x240;
+		cmx2xx_display = &generic_tft_320x240;
 		break;
 	case MTYPE_STN640x480:
-		cmx270_display = &generic_stn_640x480;
+		cmx2xx_display = &generic_stn_640x480;
 		break;
 	default: /* fallback to CRT 640x480 */
-		cmx270_display = &generic_crt_640x480;
+		cmx2xx_display = &generic_crt_640x480;
 		break;
 	}
 	return 1;
@@ -577,18 +580,18 @@ static int __init cmx270_set_display(char *str)
 /*
    This should be done really early to get proper configuration for
    frame buffer.
-   Indeed, pxafb parameters can be used istead, but CM-X270 bootloader
+   Indeed, pxafb parameters can be used istead, but CM-X2XX bootloader
    has limitied line length for kernel command line, and also it will
    break compatibitlty with proprietary releases already in field.
 */
-__setup("monitor=", cmx270_set_display);
+__setup("monitor=", cmx2xx_set_display);
 
-static void __init cmx270_init_display(void)
+static void __init cmx2xx_init_display(void)
 {
-	set_pxa_fb_info(cmx270_display);
+	set_pxa_fb_info(cmx2xx_display);
 }
 #else
-static inline void cmx270_init_display(void) {}
+static inline void cmx2xx_init_display(void) {}
 #endif
 
 /* PXA27x OHCI controller setup */
@@ -679,9 +682,9 @@ static inline void cmx270_init_mmc(void) {}
 #ifdef CONFIG_PM
 static unsigned long sleep_save_msc[10];
 
-static int cmx270_suspend(struct sys_device *dev, pm_message_t state)
+static int cmx2xx_suspend(struct sys_device *dev, pm_message_t state)
 {
-	cmx270_pci_suspend();
+	cmx2xx_pci_suspend();
 
 	/* save MSC registers */
 	sleep_save_msc[0] = MSC0;
@@ -703,9 +706,9 @@ static int cmx270_suspend(struct sys_device *dev, pm_message_t state)
 	return 0;
 }
 
-static int cmx270_resume(struct sys_device *dev)
+static int cmx2xx_resume(struct sys_device *dev)
 {
-	cmx270_pci_resume();
+	cmx2xx_pci_resume();
 
 	/* restore MSC registers */
 	MSC0 = sleep_save_msc[0];
@@ -715,92 +718,98 @@ static int cmx270_resume(struct sys_device *dev)
 	return 0;
 }
 
-static struct sysdev_class cmx270_pm_sysclass = {
+static struct sysdev_class cmx2xx_pm_sysclass = {
 	.name = "pm",
-	.resume = cmx270_resume,
-	.suspend = cmx270_suspend,
+	.resume = cmx2xx_resume,
+	.suspend = cmx2xx_suspend,
 };
 
-static struct sys_device cmx270_pm_device = {
-	.cls = &cmx270_pm_sysclass,
+static struct sys_device cmx2xx_pm_device = {
+	.cls = &cmx2xx_pm_sysclass,
 };
 
-static int __init cmx270_pm_init(void)
+static int __init cmx2xx_pm_init(void)
 {
 	int error;
-	error = sysdev_class_register(&cmx270_pm_sysclass);
+	error = sysdev_class_register(&cmx2xx_pm_sysclass);
 	if (error == 0)
-		error = sysdev_register(&cmx270_pm_device);
+		error = sysdev_register(&cmx2xx_pm_device);
 	return error;
 }
 #else
-static int __init cmx270_pm_init(void) { return 0; }
+static int __init cmx2xx_pm_init(void) { return 0; }
 #endif
 
 #if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
-static void __init cmx270_init_ac97(void)
+static void __init cmx2xx_init_ac97(void)
 {
 	pxa_set_ac97_info(NULL);
 }
 #else
-static inline void cmx270_init_ac97(void) {}
+static inline void cmx2xx_init_ac97(void) {}
 #endif
 
 static void __init cmx270_init(void)
 {
-	cmx270_pm_init();
-
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
 
-	cmx270_init_dm9000();
 	cmx270_init_rtc();
-	cmx270_init_display();
 	cmx270_init_mmc();
 	cmx270_init_ohci();
-	cmx270_init_ac97();
-	cmx270_init_touchscreen();
-	cmx270_init_leds();
 	cmx270_init_2700G();
 }
 
-static void __init cmx270_init_irq(void)
+static void __init cmx2xx_init(void)
+{
+	cmx2xx_pm_init();
+
+	cmx270_init();
+
+	cmx2xx_init_dm9000();
+	cmx2xx_init_display();
+	cmx2xx_init_ac97();
+	cmx2xx_init_touchscreen();
+	cmx2xx_init_leds();
+}
+
+static void __init cmx2xx_init_irq(void)
 {
 	pxa27x_init_irq();
 
-	cmx270_pci_init_irq(GPIO22_IT8152_IRQ);
+	cmx2xx_pci_init_irq(CMX270_GPIO_IT8152_IRQ);
 }
 
 #ifdef CONFIG_PCI
 /* Map PCI companion statically */
-static struct map_desc cmx270_io_desc[] __initdata = {
+static struct map_desc cmx2xx_io_desc[] __initdata = {
 	[0] = { /* PCI bridge */
-		.virtual	= CMX270_IT8152_VIRT,
+		.virtual	= CMX2XX_IT8152_VIRT,
 		.pfn		= __phys_to_pfn(PXA_CS4_PHYS),
 		.length		= SZ_64M,
 		.type		= MT_DEVICE
 	},
 };
 
-static void __init cmx270_map_io(void)
+static void __init cmx2xx_map_io(void)
 {
 	pxa_map_io();
-	iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
+	iotable_init(cmx2xx_io_desc, ARRAY_SIZE(cmx2xx_io_desc));
 
-	it8152_base_address = CMX270_IT8152_VIRT;
+	it8152_base_address = CMX2XX_IT8152_VIRT;
 }
 #else
-static void __init cmx270_map_io(void)
+static void __init cmx2xx_map_io(void)
 {
 	pxa_map_io();
 }
 #endif
 
-MACHINE_START(ARMCORE, "Compulab CM-x270")
+MACHINE_START(ARMCORE, "Compulab CM-X2XX")
 	.boot_params	= 0xa0000100,
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.map_io		= cmx270_map_io,
-	.init_irq	= cmx270_init_irq,
+	.map_io		= cmx2xx_map_io,
+	.init_irq	= cmx2xx_init_irq,
 	.timer		= &pxa_timer,
-	.init_machine	= cmx270_init,
+	.init_machine	= cmx2xx_init,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
index 552eb7fa6579..59aef89808d6 100644
--- a/arch/arm/mach-pxa/include/mach/memory.h
+++ b/arch/arm/mach-pxa/include/mach/memory.h
@@ -40,11 +40,11 @@
 #define NODE_MEM_SIZE_BITS	26
 
 #if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-void cmx270_pci_adjust_zones(int node, unsigned long *size,
+void cmx2xx_pci_adjust_zones(int node, unsigned long *size,
 			     unsigned long *holes);
 
 #define arch_adjust_zones(node, size, holes) \
-	cmx270_pci_adjust_zones(node, size, holes)
+	cmx2xx_pci_adjust_zones(node, size, holes)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_64M - 1)
 #endif