x86: Add entry trampolines to kcore

Without program headers for PTI entry trampoline pages, the trampoline
virtual addresses do not map to anything.

Example before:

 sudo gdb --quiet vmlinux /proc/kcore
 Reading symbols from vmlinux...done.
 [New process 1]
 Core was generated by `BOOT_IMAGE=/boot/vmlinuz-4.16.0 root=UUID=a6096b83-b763-4101-807e-f33daff63233'.
 #0  0x0000000000000000 in irq_stack_union ()
 (gdb) x /21ib 0xfffffe0000006000
    0xfffffe0000006000:  Cannot access memory at address 0xfffffe0000006000
 (gdb) quit

After:

 sudo gdb --quiet vmlinux /proc/kcore
 [sudo] password for ahunter:
 Reading symbols from vmlinux...done.
 [New process 1]
 Core was generated by `BOOT_IMAGE=/boot/vmlinuz-4.16.0-fix-4-00005-gd6e65a8b4072 root=UUID=a6096b83-b7'.
 #0  0x0000000000000000 in irq_stack_union ()
 (gdb) x /21ib 0xfffffe0000006000
    0xfffffe0000006000:  swapgs
    0xfffffe0000006003:  mov    %rsp,-0x3e12(%rip)        # 0xfffffe00000021f8
    0xfffffe000000600a:  xchg   %ax,%ax
    0xfffffe000000600c:  mov    %cr3,%rsp
    0xfffffe000000600f:  bts    $0x3f,%rsp
    0xfffffe0000006014:  and    $0xffffffffffffe7ff,%rsp
    0xfffffe000000601b:  mov    %rsp,%cr3
    0xfffffe000000601e:  mov    -0x3019(%rip),%rsp        # 0xfffffe000000300c
    0xfffffe0000006025:  pushq  $0x2b
    0xfffffe0000006027:  pushq  -0x3e35(%rip)        # 0xfffffe00000021f8
    0xfffffe000000602d:  push   %r11
    0xfffffe000000602f:  pushq  $0x33
    0xfffffe0000006031:  push   %rcx
    0xfffffe0000006032:  push   %rdi
    0xfffffe0000006033:  mov    $0xffffffff91a00010,%rdi
    0xfffffe000000603a:  callq  0xfffffe0000006046
    0xfffffe000000603f:  pause
    0xfffffe0000006041:  lfence
    0xfffffe0000006044:  jmp    0xfffffe000000603f
    0xfffffe0000006046:  mov    %rdi,(%rsp)
    0xfffffe000000604a:  retq
 (gdb) quit

In addition, entry trampolines all map to the same page.  Represent that
by giving the corresponding program headers in kcore the same offset.

This has the benefit that, when perf tools uses /proc/kcore as a source
for kernel object code, samples from different CPU trampolines are
aggregated together.  Note, such aggregation is normal for profiling
i.e. people want to profile the object code, not every different virtual
address the object code might be mapped to (across different processes
for example).

Notes by PeterZ:

This also adds the KCORE_REMAP functionality.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1528289651-4113-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

3 files changed, 28 insertions, 2 deletions

diff --git a/arch/x86/mm/cpu_entry_area.c b/arch/x86/mm/cpu_entry_area.c
index fab49fd5190f..076ebdce9bd4 100644
--- a/arch/x86/mm/cpu_entry_area.c
+++ b/arch/x86/mm/cpu_entry_area.c
@@ -3,6 +3,7 @@
 #include <linux/spinlock.h>
 #include <linux/percpu.h>
 #include <linux/kallsyms.h>
+#include <linux/kcore.h>
 
 #include <asm/cpu_entry_area.h>
 #include <asm/pgtable.h>
@@ -14,6 +15,7 @@ static DEFINE_PER_CPU_PAGE_ALIGNED(struct entry_stack_page, entry_stack_storage)
 #ifdef CONFIG_X86_64
 static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
 	[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ]);
+static DEFINE_PER_CPU(struct kcore_list, kcore_entry_trampoline);
 #endif
 
 struct cpu_entry_area *get_cpu_entry_area(int cpu)
@@ -147,6 +149,14 @@ static void __init setup_cpu_entry_area(int cpu)
 
 	cea_set_pte(&get_cpu_entry_area(cpu)->entry_trampoline,
 		     __pa_symbol(_entry_trampoline), PAGE_KERNEL_RX);
+	/*
+	 * The cpu_entry_area alias addresses are not in the kernel binary
+	 * so they do not show up in /proc/kcore normally.  This adds entries
+	 * for them manually.
+	 */
+	kclist_add_remap(&per_cpu(kcore_entry_trampoline, cpu),
+			 _entry_trampoline,
+			 &get_cpu_entry_area(cpu)->entry_trampoline, PAGE_SIZE);
 #endif
 	percpu_setup_debug_store(cpu);
 }
diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c
index e64ecb9f2720..00282f134336 100644
--- a/fs/proc/kcore.c
+++ b/fs/proc/kcore.c
@@ -383,8 +383,11 @@ static void elf_kcore_store_hdr(char *bufp, int nphdr, int dataoff)
 		phdr->p_type	= PT_LOAD;
 		phdr->p_flags	= PF_R|PF_W|PF_X;
 		phdr->p_offset	= kc_vaddr_to_offset(m->addr) + dataoff;
-		phdr->p_vaddr	= (size_t)m->addr;
-		if (m->type == KCORE_RAM || m->type == KCORE_TEXT)
+		if (m->type == KCORE_REMAP)
+			phdr->p_vaddr	= (size_t)m->vaddr;
+		else
+			phdr->p_vaddr	= (size_t)m->addr;
+		if (m->type == KCORE_RAM || m->type == KCORE_TEXT || m->type == KCORE_REMAP)
 			phdr->p_paddr	= __pa(m->addr);
 		else
 			phdr->p_paddr	= (elf_addr_t)-1;
diff --git a/include/linux/kcore.h b/include/linux/kcore.h
index 8de55e4b5ee9..bc088ef96358 100644
--- a/include/linux/kcore.h
+++ b/include/linux/kcore.h
@@ -12,11 +12,13 @@ enum kcore_type {
 	KCORE_VMEMMAP,
 	KCORE_USER,
 	KCORE_OTHER,
+	KCORE_REMAP,
 };
 
 struct kcore_list {
 	struct list_head list;
 	unsigned long addr;
+	unsigned long vaddr;
 	size_t size;
 	int type;
 };
@@ -36,11 +38,22 @@ struct vmcoredd_node {
 
 #ifdef CONFIG_PROC_KCORE
 extern void kclist_add(struct kcore_list *, void *, size_t, int type);
+static inline
+void kclist_add_remap(struct kcore_list *m, void *addr, void *vaddr, size_t sz)
+{
+	m->vaddr = (unsigned long)vaddr;
+	kclist_add(m, addr, sz, KCORE_REMAP);
+}
 #else
 static inline
 void kclist_add(struct kcore_list *new, void *addr, size_t size, int type)
 {
 }
+
+static inline
+void kclist_add_remap(struct kcore_list *m, void *addr, void *vaddr, size_t sz)
+{
+}
 #endif
 
 #endif /* _LINUX_KCORE_H */