summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorPeter Chen <peter.chen@freescale.com>2015-08-07 09:08:02 +0200
committerPeter Chen <peter.chen@freescale.com>2015-08-14 04:03:57 +0200
commitbd6e9d115df7fc6f11f3021c6fc05e3eaeb04a32 (patch)
treef5e777afc5387dc7c4dd5aa6db922cf13e308e46
parentusb: chipidea: usbmisc_imx: add non-burst setting for imx6 (diff)
downloadlinux-bd6e9d115df7fc6f11f3021c6fc05e3eaeb04a32.tar.xz
linux-bd6e9d115df7fc6f11f3021c6fc05e3eaeb04a32.zip
Doc: usb: ci-hdrc-usb2: add tx(rx)-burst-config-dword for binding doc
It is used to override the default setting for burst size, changing burst size takes effect only when the SBUSCFG.AHBBRST = 0. Signed-off-by: Peter Chen <peter.chen@freescale.com>
-rw-r--r--Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt10
1 files changed, 10 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index d52a747fb859..d71ef07bca5d 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -37,6 +37,14 @@ Optional properties:
property is used to change AHB burst configuration, check the chipidea
spec for meaning of each value. If this property is not existed, it
will use the reset value.
+- tx-burst-size-dword: it is vendor dependent, the tx burst size in dword
+ (4 bytes), This register represents the maximum length of a the burst
+ in 32-bit words while moving data from system memory to the USB
+ bus, changing this value takes effect only the SBUSCFG.AHBBRST is 0.
+- rx-burst-size-dword: it is vendor dependent, the rx burst size in dword
+ (4 bytes), This register represents the maximum length of a the burst
+ in 32-bit words while moving data from the USB bus to system memory,
+ changing this value takes effect only the SBUSCFG.AHBBRST is 0.
Example:
@@ -51,4 +59,6 @@ Example:
gadget-itc-setting = <0x4>; /* 4 micro-frames */
/* Incremental burst of unspecified length */
ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>; /* 64 bytes */
+ rx-burst-size-dword = <0x10>;
};