diff options
author | Alan Ott <alan@signal11.us> | 2012-09-02 17:44:13 +0200 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2012-09-04 20:43:55 +0200 |
commit | 3731a334c012ed825a87e1f152bbf980f79dabb2 (patch) | |
tree | 15bd34887ee32e1fd9e8e3810303fb511fca0524 | |
parent | net: Add INET dependency on aes crypto for the sake of TCP fastopen. (diff) | |
download | linux-3731a334c012ed825a87e1f152bbf980f79dabb2.tar.xz linux-3731a334c012ed825a87e1f152bbf980f79dabb2.zip |
ieee802154: MRF24J40 driver
Driver for the Microchip MRF24J40 802.15.4 WPAN module.
Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r-- | drivers/net/ieee802154/Kconfig | 11 | ||||
-rw-r--r-- | drivers/net/ieee802154/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/ieee802154/mrf24j40.c | 767 |
3 files changed, 779 insertions, 0 deletions
diff --git a/drivers/net/ieee802154/Kconfig b/drivers/net/ieee802154/Kconfig index 1fc4eefc20ed..08ae4655423a 100644 --- a/drivers/net/ieee802154/Kconfig +++ b/drivers/net/ieee802154/Kconfig @@ -34,3 +34,14 @@ config IEEE802154_AT86RF230 depends on IEEE802154_DRIVERS && MAC802154 tristate "AT86RF230/231 transceiver driver" depends on SPI + +config IEEE802154_MRF24J40 + tristate "Microchip MRF24J40 transceiver driver" + depends on IEEE802154_DRIVERS && MAC802154 + depends on SPI + ---help--- + Say Y here to enable the MRF24J20 SPI 802.15.4 wireless + controller. + + This driver can also be built as a module. To do so, say M here. + the module will be called 'mrf24j40'. diff --git a/drivers/net/ieee802154/Makefile b/drivers/net/ieee802154/Makefile index 4f4371d3aa7d..abb0c08decb0 100644 --- a/drivers/net/ieee802154/Makefile +++ b/drivers/net/ieee802154/Makefile @@ -1,3 +1,4 @@ obj-$(CONFIG_IEEE802154_FAKEHARD) += fakehard.o obj-$(CONFIG_IEEE802154_FAKELB) += fakelb.o obj-$(CONFIG_IEEE802154_AT86RF230) += at86rf230.o +obj-$(CONFIG_IEEE802154_MRF24J40) += mrf24j40.o diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c new file mode 100644 index 000000000000..0e53d4f431d2 --- /dev/null +++ b/drivers/net/ieee802154/mrf24j40.c @@ -0,0 +1,767 @@ +/* + * Driver for Microchip MRF24J40 802.15.4 Wireless-PAN Networking controller + * + * Copyright (C) 2012 Alan Ott <alan@signal11.us> + * Signal 11 Software + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/spi/spi.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <net/wpan-phy.h> +#include <net/mac802154.h> + +/* MRF24J40 Short Address Registers */ +#define REG_RXMCR 0x00 /* Receive MAC control */ +#define REG_PANIDL 0x01 /* PAN ID (low) */ +#define REG_PANIDH 0x02 /* PAN ID (high) */ +#define REG_SADRL 0x03 /* Short address (low) */ +#define REG_SADRH 0x04 /* Short address (high) */ +#define REG_EADR0 0x05 /* Long address (low) (high is EADR7) */ +#define REG_TXMCR 0x11 /* Transmit MAC control */ +#define REG_PACON0 0x16 /* Power Amplifier Control */ +#define REG_PACON1 0x17 /* Power Amplifier Control */ +#define REG_PACON2 0x18 /* Power Amplifier Control */ +#define REG_TXNCON 0x1B /* Transmit Normal FIFO Control */ +#define REG_TXSTAT 0x24 /* TX MAC Status Register */ +#define REG_SOFTRST 0x2A /* Soft Reset */ +#define REG_TXSTBL 0x2E /* TX Stabilization */ +#define REG_INTSTAT 0x31 /* Interrupt Status */ +#define REG_INTCON 0x32 /* Interrupt Control */ +#define REG_RFCTL 0x36 /* RF Control Mode Register */ +#define REG_BBREG1 0x39 /* Baseband Registers */ +#define REG_BBREG2 0x3A /* */ +#define REG_BBREG6 0x3E /* */ +#define REG_CCAEDTH 0x3F /* Energy Detection Threshold */ + +/* MRF24J40 Long Address Registers */ +#define REG_RFCON0 0x200 /* RF Control Registers */ +#define REG_RFCON1 0x201 +#define REG_RFCON2 0x202 +#define REG_RFCON3 0x203 +#define REG_RFCON5 0x205 +#define REG_RFCON6 0x206 +#define REG_RFCON7 0x207 +#define REG_RFCON8 0x208 +#define REG_RSSI 0x210 +#define REG_SLPCON0 0x211 /* Sleep Clock Control Registers */ +#define REG_SLPCON1 0x220 +#define REG_WAKETIMEL 0x222 /* Wake-up Time Match Value Low */ +#define REG_WAKETIMEH 0x223 /* Wake-up Time Match Value High */ +#define REG_RX_FIFO 0x300 /* Receive FIFO */ + +/* Device configuration: Only channels 11-26 on page 0 are supported. */ +#define MRF24J40_CHAN_MIN 11 +#define MRF24J40_CHAN_MAX 26 +#define CHANNEL_MASK (((u32)1 << (MRF24J40_CHAN_MAX + 1)) \ + - ((u32)1 << MRF24J40_CHAN_MIN)) + +#define TX_FIFO_SIZE 128 /* From datasheet */ +#define RX_FIFO_SIZE 144 /* From datasheet */ +#define SET_CHANNEL_DELAY_US 192 /* From datasheet */ + +/* Device Private Data */ +struct mrf24j40 { + struct spi_device *spi; + struct ieee802154_dev *dev; + + struct mutex buffer_mutex; /* only used to protect buf */ + struct completion tx_complete; + struct work_struct irqwork; + u8 *buf; /* 3 bytes. Used for SPI single-register transfers. */ +}; + +/* Read/Write SPI Commands for Short and Long Address registers. */ +#define MRF24J40_READSHORT(reg) ((reg) << 1) +#define MRF24J40_WRITESHORT(reg) ((reg) << 1 | 1) +#define MRF24J40_READLONG(reg) (1 << 15 | (reg) << 5) +#define MRF24J40_WRITELONG(reg) (1 << 15 | (reg) << 5 | 1 << 4) + +/* Maximum speed to run the device at. TODO: Get the real max value from + * someone at Microchip since it isn't in the datasheet. */ +#define MAX_SPI_SPEED_HZ 1000000 + +#define printdev(X) (&X->spi->dev) + +static int write_short_reg(struct mrf24j40 *devrec, u8 reg, u8 value) +{ + int ret; + struct spi_message msg; + struct spi_transfer xfer = { + .len = 2, + .tx_buf = devrec->buf, + .rx_buf = devrec->buf, + }; + + spi_message_init(&msg); + spi_message_add_tail(&xfer, &msg); + + mutex_lock(&devrec->buffer_mutex); + devrec->buf[0] = MRF24J40_WRITESHORT(reg); + devrec->buf[1] = value; + + ret = spi_sync(devrec->spi, &msg); + if (ret) + dev_err(printdev(devrec), + "SPI write Failed for short register 0x%hhx\n", reg); + + mutex_unlock(&devrec->buffer_mutex); + return ret; +} + +static int read_short_reg(struct mrf24j40 *devrec, u8 reg, u8 *val) +{ + int ret = -1; + struct spi_message msg; + struct spi_transfer xfer = { + .len = 2, + .tx_buf = devrec->buf, + .rx_buf = devrec->buf, + }; + + spi_message_init(&msg); + spi_message_add_tail(&xfer, &msg); + + mutex_lock(&devrec->buffer_mutex); + devrec->buf[0] = MRF24J40_READSHORT(reg); + devrec->buf[1] = 0; + + ret = spi_sync(devrec->spi, &msg); + if (ret) + dev_err(printdev(devrec), + "SPI read Failed for short register 0x%hhx\n", reg); + else + *val = devrec->buf[1]; + + mutex_unlock(&devrec->buffer_mutex); + return ret; +} + +static int read_long_reg(struct mrf24j40 *devrec, u16 reg, u8 *value) +{ + int ret; + u16 cmd; + struct spi_message msg; + struct spi_transfer xfer = { + .len = 3, + .tx_buf = devrec->buf, + .rx_buf = devrec->buf, + }; + + spi_message_init(&msg); + spi_message_add_tail(&xfer, &msg); + + cmd = MRF24J40_READLONG(reg); + mutex_lock(&devrec->buffer_mutex); + devrec->buf[0] = cmd >> 8 & 0xff; + devrec->buf[1] = cmd & 0xff; + devrec->buf[2] = 0; + + ret = spi_sync(devrec->spi, &msg); + if (ret) + dev_err(printdev(devrec), + "SPI read Failed for long register 0x%hx\n", reg); + else + *value = devrec->buf[2]; + + mutex_unlock(&devrec->buffer_mutex); + return ret; +} + +static int write_long_reg(struct mrf24j40 *devrec, u16 reg, u8 val) +{ + int ret; + u16 cmd; + struct spi_message msg; + struct spi_transfer xfer = { + .len = 3, + .tx_buf = devrec->buf, + .rx_buf = devrec->buf, + }; + + spi_message_init(&msg); + spi_message_add_tail(&xfer, &msg); + + cmd = MRF24J40_WRITELONG(reg); + mutex_lock(&devrec->buffer_mutex); + devrec->buf[0] = cmd >> 8 & 0xff; + devrec->buf[1] = cmd & 0xff; + devrec->buf[2] = val; + + ret = spi_sync(devrec->spi, &msg); + if (ret) + dev_err(printdev(devrec), + "SPI write Failed for long register 0x%hx\n", reg); + + mutex_unlock(&devrec->buffer_mutex); + return ret; +} + +/* This function relies on an undocumented write method. Once a write command + and address is set, as many bytes of data as desired can be clocked into + the device. The datasheet only shows setting one byte at a time. */ +static int write_tx_buf(struct mrf24j40 *devrec, u16 reg, + const u8 *data, size_t length) +{ + int ret; + u16 cmd; + u8 lengths[2]; + struct spi_message msg; + struct spi_transfer addr_xfer = { + .len = 2, + .tx_buf = devrec->buf, + }; + struct spi_transfer lengths_xfer = { + .len = 2, + .tx_buf = &lengths, /* TODO: Is DMA really required for SPI? */ + }; + struct spi_transfer data_xfer = { + .len = length, + .tx_buf = data, + }; + + /* Range check the length. 2 bytes are used for the length fields.*/ + if (length > TX_FIFO_SIZE-2) { + dev_err(printdev(devrec), "write_tx_buf() was passed too large a buffer. Performing short write.\n"); + length = TX_FIFO_SIZE-2; + } + + spi_message_init(&msg); + spi_message_add_tail(&addr_xfer, &msg); + spi_message_add_tail(&lengths_xfer, &msg); + spi_message_add_tail(&data_xfer, &msg); + + cmd = MRF24J40_WRITELONG(reg); + mutex_lock(&devrec->buffer_mutex); + devrec->buf[0] = cmd >> 8 & 0xff; + devrec->buf[1] = cmd & 0xff; + lengths[0] = 0x0; /* Header Length. Set to 0 for now. TODO */ + lengths[1] = length; /* Total length */ + + ret = spi_sync(devrec->spi, &msg); + if (ret) + dev_err(printdev(devrec), "SPI write Failed for TX buf\n"); + + mutex_unlock(&devrec->buffer_mutex); + return ret; +} + +static int mrf24j40_read_rx_buf(struct mrf24j40 *devrec, + u8 *data, u8 *len, u8 *lqi) +{ + u8 rx_len; + u8 addr[2]; + u8 lqi_rssi[2]; + u16 cmd; + int ret; + struct spi_message msg; + struct spi_transfer addr_xfer = { + .len = 2, + .tx_buf = &addr, + }; + struct spi_transfer data_xfer = { + .len = 0x0, /* set below */ + .rx_buf = data, + }; + struct spi_transfer status_xfer = { + .len = 2, + .rx_buf = &lqi_rssi, + }; + + /* Get the length of the data in the RX FIFO. The length in this + * register exclues the 1-byte length field at the beginning. */ + ret = read_long_reg(devrec, REG_RX_FIFO, &rx_len); + if (ret) + goto out; + + /* Range check the RX FIFO length, accounting for the one-byte + * length field at the begining. */ + if (rx_len > RX_FIFO_SIZE-1) { + dev_err(printdev(devrec), "Invalid length read from device. Performing short read.\n"); + rx_len = RX_FIFO_SIZE-1; + } + + if (rx_len > *len) { + /* Passed in buffer wasn't big enough. Should never happen. */ + dev_err(printdev(devrec), "Buffer not big enough. Performing short read\n"); + rx_len = *len; + } + + /* Set up the commands to read the data. */ + cmd = MRF24J40_READLONG(REG_RX_FIFO+1); + addr[0] = cmd >> 8 & 0xff; + addr[1] = cmd & 0xff; + data_xfer.len = rx_len; + + spi_message_init(&msg); + spi_message_add_tail(&addr_xfer, &msg); + spi_message_add_tail(&data_xfer, &msg); + spi_message_add_tail(&status_xfer, &msg); + + ret = spi_sync(devrec->spi, &msg); + if (ret) { + dev_err(printdev(devrec), "SPI RX Buffer Read Failed.\n"); + goto out; + } + + *lqi = lqi_rssi[0]; + *len = rx_len; + +#ifdef DEBUG + print_hex_dump(KERN_DEBUG, "mrf24j40 rx: ", + DUMP_PREFIX_OFFSET, 16, 1, data, *len, 0); + printk(KERN_DEBUG "mrf24j40 rx: lqi: %02hhx rssi: %02hhx\n", + lqi_rssi[0], lqi_rssi[1]); +#endif + +out: + return ret; +} + +static int mrf24j40_tx(struct ieee802154_dev *dev, struct sk_buff *skb) +{ + struct mrf24j40 *devrec = dev->priv; + u8 val; + int ret = 0; + + dev_dbg(printdev(devrec), "tx packet of %d bytes\n", skb->len); + + ret = write_tx_buf(devrec, 0x000, skb->data, skb->len); + if (ret) + goto err; + + /* Set TXNTRIG bit of TXNCON to send packet */ + ret = read_short_reg(devrec, REG_TXNCON, &val); + if (ret) + goto err; + val |= 0x1; + val &= ~0x4; + write_short_reg(devrec, REG_TXNCON, val); + + INIT_COMPLETION(devrec->tx_complete); + + /* Wait for the device to send the TX complete interrupt. */ + ret = wait_for_completion_interruptible_timeout( + &devrec->tx_complete, + 5 * HZ); + if (ret == -ERESTARTSYS) + goto err; + if (ret == 0) { + ret = -ETIMEDOUT; + goto err; + } + + /* Check for send error from the device. */ + ret = read_short_reg(devrec, REG_TXSTAT, &val); + if (ret) + goto err; + if (val & 0x1) { + dev_err(printdev(devrec), "Error Sending. Retry count exceeded\n"); + ret = -ECOMM; /* TODO: Better error code ? */ + } else + dev_dbg(printdev(devrec), "Packet Sent\n"); + +err: + + return ret; +} + +static int mrf24j40_ed(struct ieee802154_dev *dev, u8 *level) +{ + /* TODO: */ + printk(KERN_WARNING "mrf24j40: ed not implemented\n"); + *level = 0; + return 0; +} + +static int mrf24j40_start(struct ieee802154_dev *dev) +{ + struct mrf24j40 *devrec = dev->priv; + u8 val; + int ret; + + dev_dbg(printdev(devrec), "start\n"); + + ret = read_short_reg(devrec, REG_INTCON, &val); + if (ret) + return ret; + val &= ~(0x1|0x8); /* Clear TXNIE and RXIE. Enable interrupts */ + write_short_reg(devrec, REG_INTCON, val); + + return 0; +} + +static void mrf24j40_stop(struct ieee802154_dev *dev) +{ + struct mrf24j40 *devrec = dev->priv; + u8 val; + int ret; + dev_dbg(printdev(devrec), "stop\n"); + + ret = read_short_reg(devrec, REG_INTCON, &val); + if (ret) + return; + val |= 0x1|0x8; /* Set TXNIE and RXIE. Disable Interrupts */ + write_short_reg(devrec, REG_INTCON, val); + + return; +} + +static int mrf24j40_set_channel(struct ieee802154_dev *dev, + int page, int channel) +{ + struct mrf24j40 *devrec = dev->priv; + u8 val; + int ret; + + dev_dbg(printdev(devrec), "Set Channel %d\n", channel); + + WARN_ON(page != 0); + WARN_ON(channel < MRF24J40_CHAN_MIN); + WARN_ON(channel > MRF24J40_CHAN_MAX); + + /* Set Channel TODO */ + val = (channel-11) << 4 | 0x03; + write_long_reg(devrec, REG_RFCON0, val); + + /* RF Reset */ + ret = read_short_reg(devrec, REG_RFCTL, &val); + if (ret) + return ret; + val |= 0x04; + write_short_reg(devrec, REG_RFCTL, val); + val &= ~0x04; + write_short_reg(devrec, REG_RFCTL, val); + + udelay(SET_CHANNEL_DELAY_US); /* per datasheet */ + + return 0; +} + +static int mrf24j40_filter(struct ieee802154_dev *dev, + struct ieee802154_hw_addr_filt *filt, + unsigned long changed) +{ + struct mrf24j40 *devrec = dev->priv; + + dev_dbg(printdev(devrec), "filter\n"); + + if (changed & IEEE802515_AFILT_SADDR_CHANGED) { + /* Short Addr */ + u8 addrh, addrl; + addrh = filt->short_addr >> 8 & 0xff; + addrl = filt->short_addr & 0xff; + + write_short_reg(devrec, REG_SADRH, addrh); + write_short_reg(devrec, REG_SADRL, addrl); + dev_dbg(printdev(devrec), + "Set short addr to %04hx\n", filt->short_addr); + } + + if (changed & IEEE802515_AFILT_IEEEADDR_CHANGED) { + /* Device Address */ + int i; + for (i = 0; i < 8; i++) + write_short_reg(devrec, REG_EADR0+i, + filt->ieee_addr[i]); + +#ifdef DEBUG + printk(KERN_DEBUG "Set long addr to: "); + for (i = 0; i < 8; i++) + printk("%02hhx ", filt->ieee_addr[i]); + printk(KERN_DEBUG "\n"); +#endif + } + + if (changed & IEEE802515_AFILT_PANID_CHANGED) { + /* PAN ID */ + u8 panidl, panidh; + panidh = filt->pan_id >> 8 & 0xff; + panidl = filt->pan_id & 0xff; + write_short_reg(devrec, REG_PANIDH, panidh); + write_short_reg(devrec, REG_PANIDL, panidl); + + dev_dbg(printdev(devrec), "Set PANID to %04hx\n", filt->pan_id); + } + + if (changed & IEEE802515_AFILT_PANC_CHANGED) { + /* Pan Coordinator */ + u8 val; + int ret; + + ret = read_short_reg(devrec, REG_RXMCR, &val); + if (ret) + return ret; + if (filt->pan_coord) + val |= 0x8; + else + val &= ~0x8; + write_short_reg(devrec, REG_RXMCR, val); + + /* REG_SLOTTED is maintained as default (unslotted/CSMA-CA). + * REG_ORDER is maintained as default (no beacon/superframe). + */ + + dev_dbg(printdev(devrec), "Set Pan Coord to %s\n", + filt->pan_coord ? "on" : "off"); + } + + return 0; +} + +static int mrf24j40_handle_rx(struct mrf24j40 *devrec) +{ + u8 len = RX_FIFO_SIZE; + u8 lqi = 0; + u8 val; + int ret = 0; + struct sk_buff *skb; + + /* Turn off reception of packets off the air. This prevents the + * device from overwriting the buffer while we're reading it. */ + ret = read_short_reg(devrec, REG_BBREG1, &val); + if (ret) + goto out; + val |= 4; /* SET RXDECINV */ + write_short_reg(devrec, REG_BBREG1, val); + + skb = alloc_skb(len, GFP_KERNEL); + if (!skb) { + ret = -ENOMEM; + goto out; + } + + ret = mrf24j40_read_rx_buf(devrec, skb_put(skb, len), &len, &lqi); + if (ret < 0) { + dev_err(printdev(devrec), "Failure reading RX FIFO\n"); + kfree_skb(skb); + ret = -EINVAL; + goto out; + } + + /* Cut off the checksum */ + skb_trim(skb, len-2); + + /* TODO: Other drivers call ieee20154_rx_irqsafe() here (eg: cc2040, + * also from a workqueue). I think irqsafe is not necessary here. + * Can someone confirm? */ + ieee802154_rx_irqsafe(devrec->dev, skb, lqi); + + dev_dbg(printdev(devrec), "RX Handled\n"); + +out: + /* Turn back on reception of packets off the air. */ + ret = read_short_reg(devrec, REG_BBREG1, &val); + if (ret) + return ret; + val &= ~0x4; /* Clear RXDECINV */ + write_short_reg(devrec, REG_BBREG1, val); + + return ret; +} + +static struct ieee802154_ops mrf24j40_ops = { + .owner = THIS_MODULE, + .xmit = mrf24j40_tx, + .ed = mrf24j40_ed, + .start = mrf24j40_start, + .stop = mrf24j40_stop, + .set_channel = mrf24j40_set_channel, + .set_hw_addr_filt = mrf24j40_filter, +}; + +static irqreturn_t mrf24j40_isr(int irq, void *data) +{ + struct mrf24j40 *devrec = data; + + disable_irq_nosync(irq); + + schedule_work(&devrec->irqwork); + + return IRQ_HANDLED; +} + +static void mrf24j40_isrwork(struct work_struct *work) +{ + struct mrf24j40 *devrec = container_of(work, struct mrf24j40, irqwork); + u8 intstat; + int ret; + + /* Read the interrupt status */ + ret = read_short_reg(devrec, REG_INTSTAT, &intstat); + if (ret) + goto out; + + /* Check for TX complete */ + if (intstat & 0x1) + complete(&devrec->tx_complete); + + /* Check for Rx */ + if (intstat & 0x8) + mrf24j40_handle_rx(devrec); + +out: + enable_irq(devrec->spi->irq); +} + +static int __devinit mrf24j40_probe(struct spi_device *spi) +{ + int ret = -ENOMEM; + u8 val; + struct mrf24j40 *devrec; + + printk(KERN_INFO "mrf24j40: probe(). IRQ: %d\n", spi->irq); + + devrec = kzalloc(sizeof(struct mrf24j40), GFP_KERNEL); + if (!devrec) + goto err_devrec; + devrec->buf = kzalloc(3, GFP_KERNEL); + if (!devrec->buf) + goto err_buf; + + spi->mode = SPI_MODE_0; /* TODO: Is this appropriate for right here? */ + if (spi->max_speed_hz > MAX_SPI_SPEED_HZ) + spi->max_speed_hz = MAX_SPI_SPEED_HZ; + + mutex_init(&devrec->buffer_mutex); + init_completion(&devrec->tx_complete); + INIT_WORK(&devrec->irqwork, mrf24j40_isrwork); + devrec->spi = spi; + dev_set_drvdata(&spi->dev, devrec); + + /* Register with the 802154 subsystem */ + + devrec->dev = ieee802154_alloc_device(0, &mrf24j40_ops); + if (!devrec->dev) + goto err_alloc_dev; + + devrec->dev->priv = devrec; + devrec->dev->parent = &devrec->spi->dev; + devrec->dev->phy->channels_supported[0] = CHANNEL_MASK; + devrec->dev->flags = IEEE802154_HW_OMIT_CKSUM|IEEE802154_HW_AACK; + + dev_dbg(printdev(devrec), "registered mrf24j40\n"); + ret = ieee802154_register_device(devrec->dev); + if (ret) + goto err_register_device; + + /* Initialize the device. + From datasheet section 3.2: Initialization. */ + write_short_reg(devrec, REG_SOFTRST, 0x07); + write_short_reg(devrec, REG_PACON2, 0x98); + write_short_reg(devrec, REG_TXSTBL, 0x95); + write_long_reg(devrec, REG_RFCON0, 0x03); + write_long_reg(devrec, REG_RFCON1, 0x01); + write_long_reg(devrec, REG_RFCON2, 0x80); + write_long_reg(devrec, REG_RFCON6, 0x90); + write_long_reg(devrec, REG_RFCON7, 0x80); + write_long_reg(devrec, REG_RFCON8, 0x10); + write_long_reg(devrec, REG_SLPCON1, 0x21); + write_short_reg(devrec, REG_BBREG2, 0x80); + write_short_reg(devrec, REG_CCAEDTH, 0x60); + write_short_reg(devrec, REG_BBREG6, 0x40); + write_short_reg(devrec, REG_RFCTL, 0x04); + write_short_reg(devrec, REG_RFCTL, 0x0); + udelay(192); + + /* Set RX Mode. RXMCR<1:0>: 0x0 normal, 0x1 promisc, 0x2 error */ + ret = read_short_reg(devrec, REG_RXMCR, &val); + if (ret) + goto err_read_reg; + val &= ~0x3; /* Clear RX mode (normal) */ + write_short_reg(devrec, REG_RXMCR, val); + + ret = request_irq(spi->irq, + mrf24j40_isr, + IRQF_TRIGGER_FALLING, + dev_name(&spi->dev), + devrec); + + if (ret) { + dev_err(printdev(devrec), "Unable to get IRQ"); + goto err_irq; + } + + return 0; + +err_irq: +err_read_reg: + ieee802154_unregister_device(devrec->dev); +err_register_device: + ieee802154_free_device(devrec->dev); +err_alloc_dev: + kfree(devrec->buf); +err_buf: + kfree(devrec); +err_devrec: + return ret; +} + +static int __devexit mrf24j40_remove(struct spi_device *spi) +{ + struct mrf24j40 *devrec = dev_get_drvdata(&spi->dev); + + dev_dbg(printdev(devrec), "remove\n"); + + free_irq(spi->irq, devrec); + flush_work_sync(&devrec->irqwork); /* TODO: Is this the right call? */ + ieee802154_unregister_device(devrec->dev); + ieee802154_free_device(devrec->dev); + /* TODO: Will ieee802154_free_device() wait until ->xmit() is + * complete? */ + + /* Clean up the SPI stuff. */ + dev_set_drvdata(&spi->dev, NULL); + kfree(devrec->buf); + kfree(devrec); + return 0; +} + +static const struct spi_device_id mrf24j40_ids[] = { + { "mrf24j40", 0 }, + { "mrf24j40ma", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(spi, mrf24j40_ids); + +static struct spi_driver mrf24j40_driver = { + .driver = { + .name = "mrf24j40", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .id_table = mrf24j40_ids, + .probe = mrf24j40_probe, + .remove = __devexit_p(mrf24j40_remove), +}; + +static int __init mrf24j40_init(void) +{ + return spi_register_driver(&mrf24j40_driver); +} + +static void __exit mrf24j40_exit(void) +{ + spi_unregister_driver(&mrf24j40_driver); +} + +module_init(mrf24j40_init); +module_exit(mrf24j40_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Alan Ott"); +MODULE_DESCRIPTION("MRF24J40 SPI 802.15.4 Controller Driver"); |