Merge tag 'tty-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH:
 "Here is the big TTY / Serial driver merge for 3.11-rc1.

  It's not all that big, nothing major changed in the tty api, which is
  a nice change, just a number of serial driver fixes and updates and
  new drivers, along with some n_tty fixes to help resolve some reported
  issues.

  All of these have been in the linux-next releases for a while, with
  the exception of the last revert patch, which was reported this past
  weekend by two different people as being needed."

* tag 'tty-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (51 commits)
  Revert "serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller"
  pch_uart: Add uart_clk selection for the MinnowBoard
  tty: atmel_serial: prepare clk before calling enable
  tty: Reset itty for other pty
  n_tty: Buffer work should not reschedule itself
  n_tty: Fix unsafe update of available buffer space
  n_tty: Untangle read completion variables
  n_tty: Encapsulate minimum_to_wake within N_TTY
  serial: omap: Fix device tree based PM runtime
  serial: imx: Fix serial clock unbalance
  serial/mpc52xx_uart: fix kernel panic when system reboot
  serial: mfd: Add sysrq support
  serial: imx: enable the clocks for console
  tty: serial: add Freescale lpuart driver support
  serial: imx: Improve Kconfig text
  serial: imx: Allow module build
  serial: imx: Fix warning when !CONFIG_SERIAL_IMX_CONSOLE
  tty/serial/sirf: fix error propagation in sirfsoc_uart_probe()
  serial: omap: fix potential NULL pointer dereference in serial_omap_runtime_suspend()
  tty: serial: Enable uartlite for ARM zynq
  ...

57 files changed, 2144 insertions, 797 deletions

diff --git a/Documentation/console/console.txt b/Documentation/console/console.txt
index 926cf1b5e63e..f93810d599ad 100644
--- a/Documentation/console/console.txt
+++ b/Documentation/console/console.txt
@@ -12,20 +12,20 @@ The second type has to be explicitly loaded and unloaded. This will be called
 any time with each driver sharing the console with other drivers including
 the system driver. However, modular drivers cannot take over the console
 that is currently occupied by another modular driver. (Exception: Drivers that
-call take_over_console() will succeed in the takeover regardless of the type
+call do_take_over_console() will succeed in the takeover regardless of the type
 of driver occupying the consoles.) They can only take over the console that is
 occupied by the system driver. In the same token, if the modular driver is
 released by the console, the system driver will take over.
 
 Modular drivers, from the programmer's point of view, has to call:
 
-	 take_over_console() - load and bind driver to console layer
-	 give_up_console() - unbind and unload driver
+	 do_take_over_console() - load and bind driver to console layer
+	 give_up_console() - unload driver, it will only work if driver is fully unbond
 
 In newer kernels, the following are also available:
 
-	 register_con_driver()
-	 unregister_con_driver()
+	 do_register_con_driver()
+	 do_unregister_con_driver()
 
 If sysfs is enabled, the contents of /sys/class/vtconsole can be
 examined. This shows the console backends currently registered by the
@@ -94,12 +94,12 @@ for more details).
 Notes for developers:
 =====================
 
-take_over_console() is now broken up into:
+do_take_over_console() is now broken up into:
 
-     register_con_driver()
-     bind_con_driver() - private function
+     do_register_con_driver()
+     do_bind_con_driver() - private function
 
-give_up_console() is a wrapper to unregister_con_driver(), and a driver must
+give_up_console() is a wrapper to do_unregister_con_driver(), and a driver must
 be fully unbound for this call to succeed. con_is_bound() will check if the
 driver is bound or not.
 
@@ -109,10 +109,10 @@ Guidelines for console driver writers:
 In order for binding to and unbinding from the console to properly work,
 console drivers must follow these guidelines:
 
-1. All drivers, except system drivers, must call either register_con_driver()
-   or take_over_console(). register_con_driver() will just add the driver to
+1. All drivers, except system drivers, must call either do_register_con_driver()
+   or do_take_over_console(). do_register_con_driver() will just add the driver to
    the console's internal list. It won't take over the
-   console. take_over_console(), as it name implies, will also take over (or
+   console. do_take_over_console(), as it name implies, will also take over (or
    bind to) the console.
 
 2. All resources allocated during con->con_init() must be released in
@@ -128,10 +128,10 @@ console drivers must follow these guidelines:
    rebind the driver to the console arrives.
 
 4. Upon exit of the driver, ensure that the driver is totally unbound. If the
-   condition is satisfied, then the driver must call unregister_con_driver()
+   condition is satisfied, then the driver must call do_unregister_con_driver()
    or give_up_console().
 
-5. unregister_con_driver() can also be called on conditions which make it
+5. do_unregister_con_driver() can also be called on conditions which make it
    impossible for the driver to service console requests.  This can happen
    with the framebuffer console that suddenly lost all of its drivers.
 
diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
index b462d0c54823..c662eb36be29 100644
--- a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
+++ b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
@@ -8,6 +8,8 @@ Required properties:
 Optional properties:
 - fsl,uart-has-rtscts : Indicate the uart has rts and cts
 - fsl,irda-mode : Indicate the uart supports irda mode
+- fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
+                  is DCE mode by default.
 
 Example:
 
@@ -16,4 +18,5 @@ serial@73fbc000 {
 	reg = <0x73fbc000 0x4000>;
 	interrupts = <31>;
 	fsl,uart-has-rtscts;
+	fsl,dte-mode;
 };
diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-lpuart.txt
new file mode 100644
index 000000000000..6fd1dd1638dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/tty/serial/fsl-lpuart.txt
@@ -0,0 +1,14 @@
+* Freescale low power universal asynchronous receiver/transmitter (lpuart)
+
+Required properties:
+- compatible : Should be "fsl,<soc>-lpuart"
+- reg : Address and length of the register set for the device
+- interrupts : Should contain uart interrupt
+
+Example:
+
+uart0: serial@40027000 {
+	       compatible = "fsl,vf610-lpuart";
+	       reg = <0x40027000 0x1000>;
+	       interrupts = <0 61 0x00>;
+       };
diff --git a/Documentation/serial/00-INDEX b/Documentation/serial/00-INDEX
index f7b0c7dc25ef..1f1b22fbd739 100644
--- a/Documentation/serial/00-INDEX
+++ b/Documentation/serial/00-INDEX
@@ -16,8 +16,6 @@ serial-rs485.txt
 	- info about RS485 structures and support in the kernel.
 specialix.txt
 	- info on hardware/driver for specialix IO8+ multiport serial card.
-stallion.txt
-	- info on using the Stallion multiport serial driver.
 sx.txt
 	- info on the Specialix SX/SI multiport serial driver.
 tty.txt
diff --git a/Documentation/serial/stallion.txt b/Documentation/serial/stallion.txt
deleted file mode 100644
index 4d798c0cb5cb..000000000000
--- a/Documentation/serial/stallion.txt
+++ /dev/null
@@ -1,392 +0,0 @@
-* NOTE - This is an unmaintained driver.  Lantronix, which bought Stallion
-technologies, is not active in driver maintenance, and they have no information
-on when or if they will have a 2.6 driver.
-
-James Nelson <james4765@gmail.com> - 12-12-2004
-
-Stallion Multiport Serial Driver Readme
----------------------------------------
-
-Copyright (C) 1994-1999,  Stallion Technologies.
-
-Version:   5.5.1
-Date:      28MAR99
-
-
-
-1. INTRODUCTION
-
-There are two drivers that work with the different families of Stallion
-multiport serial boards. One is for the Stallion smart boards - that is
-EasyIO, EasyConnection 8/32 and EasyConnection 8/64-PCI, the other for
-the true Stallion intelligent multiport boards - EasyConnection 8/64
-(ISA, EISA), EasyConnection/RA-PCI, ONboard and Brumby.
-
-If you are using any of the Stallion intelligent multiport boards (Brumby,
-ONboard, EasyConnection 8/64 (ISA, EISA), EasyConnection/RA-PCI) with
-Linux you will need to get the driver utility package.  This contains a
-firmware loader and the firmware images necessary to make the devices operate.
-
-The Stallion Technologies ftp site, ftp.stallion.com, will always have
-the latest version of the driver utility package.
-
-ftp://ftp.stallion.com/drivers/ata5/Linux/ata-linux-550.tar.gz
-
-As of the printing of this document the latest version of the driver
-utility package is 5.5.0. If a later version is now available then you
-should use the latest version.
-
-If you are using the EasyIO, EasyConnection 8/32 or EasyConnection 8/64-PCI
-boards then you don't need this package, although it does have a serial stats
-display program.
-
-If you require DIP switch settings, or EISA configuration files, or any
-other information related to Stallion boards then have a look at Stallion's
-web pages at http://www.stallion.com.
-
-
-
-2. INSTALLATION
-
-The drivers can be used as loadable modules or compiled into the kernel.
-You can choose which when doing a "config" on the kernel.
-
-All ISA, and EISA boards that you want to use need to be configured into
-the driver(s). All PCI boards will be automatically detected when you load
-the driver - so they do not need to be entered into the driver(s)
-configuration structure. Note that kernel PCI support is required to use PCI
-boards.
-
-There are two methods of configuring ISA and EISA boards into the drivers.
-If using the driver as a loadable module then the simplest method is to pass
-the driver configuration as module arguments. The other method is to modify
-the driver source to add configuration lines for each board in use.
-
-If you have pre-built Stallion driver modules then the module argument
-configuration method should be used. A lot of Linux distributions come with
-pre-built driver modules in /lib/modules/X.Y.Z/misc for the kernel in use.
-That makes things pretty simple to get going.
-
-
-2.1 MODULE DRIVER CONFIGURATION:
-
-The simplest configuration for modules is to use the module load arguments
-to configure any ISA or EISA boards. PCI boards are automatically
-detected, so do not need any additional configuration at all.
-
-If using EasyIO, EasyConnection 8/32 ISA, or EasyConnection 8/63-PCI
-boards then use the "stallion" driver module, Otherwise if you are using
-an EasyConnection 8/64 ISA or EISA, EasyConnection/RA-PCI, ONboard,
-Brumby or original Stallion board then use the "istallion" driver module.
-
-Typically to load up the smart board driver use:
-
-    modprobe stallion
-
-This will load the EasyIO and EasyConnection 8/32 driver. It will output a
-message to say that it loaded and print the driver version number. It will
-also print out whether it found the configured boards or not. These messages
-may not appear on the console, but typically are always logged to
-/var/adm/messages or /var/log/syslog files - depending on how the klogd and
-syslogd daemons are setup on your system.
-
-To load the intelligent board driver use:
-
-    modprobe istallion
-
-It will output similar messages to the smart board driver.
-
-If not using an auto-detectable board type (that is a PCI board) then you
-will also need to supply command line arguments to the modprobe command
-when loading the driver. The general form of the configuration argument is
-
-    board?=<name>[,<ioaddr>[,<addr>][,<irq>]]
-
-where:
-
-    board?  -- specifies the arbitrary board number of this board,
-               can be in the range 0 to 3.
-
-    name    -- textual name of this board. The board name is the common
-               board name, or any "shortened" version of that. The board
-               type number may also be used here.
-
-    ioaddr  -- specifies the I/O address of this board. This argument is
-               optional, but should generally be specified.
-
-    addr    -- optional second address argument. Some board types require
-               a second I/O address, some require a memory address. The
-               exact meaning of this argument depends on the board type.
-
-    irq     -- optional IRQ line used by this board.
-
-Up to 4 board configuration arguments can be specified on the load line.
-Here is some examples:
-
-    modprobe stallion board0=easyio,0x2a0,5
-
-This configures an EasyIO board as board 0 at I/O address 0x2a0 and IRQ 5.
-
-    modprobe istallion board3=ec8/64,0x2c0,0xcc000
-
-This configures an EasyConnection 8/64 ISA as board 3 at I/O address 0x2c0 at
-memory address 0xcc000.
-
-    modprobe stallion board1=ec8/32-at,0x2a0,0x280,10
-
-This configures an EasyConnection 8/32 ISA board at primary I/O address 0x2a0,
-secondary address 0x280 and IRQ 10.
-
-You will probably want to enter this module load and configuration information
-into your system startup scripts so that the drivers are loaded and configured
-on each system boot. Typically configuration files are put in the
-/etc/modprobe.d/ directory.
-
-
-2.2 STATIC DRIVER CONFIGURATION:
-
-For static driver configuration you need to modify the driver source code.
-Entering ISA and EISA boards into the driver(s) configuration structure
-involves editing the driver(s) source file. It's pretty easy if you follow
-the instructions below. Both drivers can support up to 4 boards. The smart
-card driver (the stallion.c driver) supports any combination of EasyIO and
-EasyConnection 8/32 boards (up to a total of 4). The intelligent driver
-supports any combination of ONboards, Brumbys, Stallions and EasyConnection
-8/64 (ISA and EISA) boards (up to a total of 4).
-
-To set up the driver(s) for the boards that you want to use you need to
-edit the appropriate driver file and add configuration entries.
-
-If using EasyIO or EasyConnection 8/32 ISA boards,
-   In drivers/char/stallion.c:
-      - find the definition of the stl_brdconf array (of structures)
-        near the top of the file
-      - modify this to match the boards you are going to install
-	(the comments before this structure should help)
-      - save and exit
-
-If using ONboard, Brumby, Stallion or EasyConnection 8/64 (ISA or EISA)
-boards,
-   In drivers/char/istallion.c:
-      - find the definition of the stli_brdconf array (of structures)
-        near the top of the file
-      - modify this to match the boards you are going to install
-	(the comments before this structure should help)
-      - save and exit
-
-Once you have set up the board configurations then you are ready to build
-the kernel or modules.
-
-When the new kernel is booted, or the loadable module loaded then the
-driver will emit some kernel trace messages about whether the configured
-boards were detected or not. Depending on how your system logger is set
-up these may come out on the console, or just be logged to
-/var/adm/messages or /var/log/syslog. You should check the messages to
-confirm that all is well.
-
-
-2.3 SHARING INTERRUPTS
-
-It is possible to share interrupts between multiple EasyIO and
-EasyConnection 8/32 boards in an EISA system. To do this you must be using
-static driver configuration, modifying the driver source code to add driver
-configuration. Then a couple of extra things are required:
-
-1. When entering the board resources into the stallion.c file you need to
-   mark the boards as using level triggered interrupts. Do this by replacing
-   the "0" entry at field position 6 (the last field) in the board
-   configuration structure with a "1". (This is the structure that defines
-   the board type, I/O locations, etc. for each board). All boards that are
-   sharing an interrupt must be set this way, and each board should have the
-   same interrupt number specified here as well. Now build the module or
-   kernel as you would normally.
-
-2. When physically installing the boards into the system you must enter
-   the system EISA configuration utility. You will need to install the EISA
-   configuration files for *all* the EasyIO and EasyConnection 8/32 boards
-   that are sharing interrupts. The Stallion EasyIO and EasyConnection 8/32
-   EISA configuration files required are supplied by Stallion Technologies
-   on the EASY Utilities floppy diskette (usually supplied in the box with
-   the board when purchased. If not, you can pick it up from Stallion's FTP
-   site, ftp.stallion.com). You will need to edit the board resources to
-   choose level triggered interrupts, and make sure to set each board's
-   interrupt to the same IRQ number.
-
-You must complete both the above steps for this to work. When you reboot
-or load the driver your EasyIO and EasyConnection 8/32 boards will be
-sharing interrupts.
-
-
-2.4 USING HIGH SHARED MEMORY
-
-The EasyConnection 8/64-EI, ONboard and Stallion boards are capable of
-using shared memory addresses above the usual 640K - 1Mb range. The ONboard
-ISA and the Stallion boards can be programmed to use memory addresses up to
-16Mb (the ISA bus addressing limit), and the EasyConnection 8/64-EI and
-ONboard/E can be programmed for memory addresses up to 4Gb (the EISA bus
-addressing limit).
-
-The higher than 1Mb memory addresses are fully supported by this driver.
-Just enter the address as you normally would for a lower than 1Mb address
-(in the driver's board configuration structure).
-
-
-
-2.5 TROUBLE SHOOTING
-
-If a board is not found by the driver but is actually in the system then the
-most likely problem is that the I/O address is wrong. Change the module load
-argument for the loadable module form. Or change it in the driver stallion.c
-or istallion.c configuration structure and rebuild the kernel or modules, or
-change it on the board.
-
-On EasyIO and EasyConnection 8/32 boards the IRQ is software programmable, so
-if there is a conflict you may need to change the IRQ used for a board. There
-are no interrupts to worry about for ONboard, Brumby or EasyConnection 8/64
-(ISA and EISA) boards. The memory region on EasyConnection 8/64 and
-ONboard boards is software programmable, but not on the Brumby boards.
-
-
-
-3. USING THE DRIVERS
-
-3.1 INTELLIGENT DRIVER OPERATION
-
-The intelligent boards also need to have their "firmware" code downloaded
-to them. This is done via a user level application supplied in the driver
-utility package called "stlload". Compile this program wherever you dropped
-the package files, by typing "make". In its simplest form you can then type
-
-    ./stlload -i cdk.sys
-
-in this directory and that will download board 0 (assuming board 0 is an
-EasyConnection 8/64 or EasyConnection/RA board). To download to an
-ONboard, Brumby or Stallion do:
-
-    ./stlload -i 2681.sys
-
-Normally you would want all boards to be downloaded as part of the standard
-system startup. To achieve this, add one of the lines above into the
-/etc/rc.d/rc.S or /etc/rc.d/rc.serial file. To download each board just add
-the "-b <brd-number>" option to the line. You will need to download code for
-every board. You should probably move the stlload program into a system
-directory, such as /usr/sbin. Also, the default location of the cdk.sys image
-file in the stlload down-loader is /usr/lib/stallion. Create that directory
-and put the cdk.sys and 2681.sys files in it. (It's a convenient place to put
-them anyway). As an example your /etc/rc.d/rc.S file might have the
-following lines added to it (if you had 3 boards):
-
-    /usr/sbin/stlload -b 0 -i /usr/lib/stallion/cdk.sys
-    /usr/sbin/stlload -b 1 -i /usr/lib/stallion/2681.sys
-    /usr/sbin/stlload -b 2 -i /usr/lib/stallion/2681.sys
-
-The image files cdk.sys and 2681.sys are specific to the board types. The
-cdk.sys will only function correctly on an EasyConnection 8/64 board. Similarly
-the 2681.sys image fill only operate on ONboard, Brumby and Stallion boards.
-If you load the wrong image file into a board it will fail to start up, and
-of course the ports will not be operational!
-
-If you are using the modularized version of the driver you might want to put
-the modprobe calls in the startup script as well (before the download lines
-obviously).
-
-
-3.2 USING THE SERIAL PORTS
-
-Once the driver is installed you will need to setup some device nodes to
-access the serial ports. The simplest method is to use the /dev/MAKEDEV program.
-It will automatically create device entries for Stallion boards. This will
-create the normal serial port devices as /dev/ttyE# where# is the port number
-starting from 0. A bank of 64 minor device numbers is allocated to each board,
-so the first port on the second board is port 64,etc. A set of callout type
-devices may also be created. They are created as the devices /dev/cue# where #
-is the same as for the ttyE devices.
-
-For the most part the Stallion driver tries to emulate the standard PC system
-COM ports and the standard Linux serial driver. The idea is that you should
-be able to use Stallion board ports and COM ports interchangeably without
-modifying anything but the device name. Anything that doesn't work like that
-should be considered a bug in this driver!
-
-If you look at the driver code you will notice that it is fairly closely
-based on the Linux serial driver (linux/drivers/char/serial.c). This is
-intentional, obviously this is the easiest way to emulate its behavior!
-
-Since this driver tries to emulate the standard serial ports as much as
-possible, most system utilities should work as they do for the standard
-COM ports. Most importantly "stty" works as expected and "setserial" can
-also be used (excepting the ability to auto-configure the I/O and IRQ
-addresses of boards). Higher baud rates are supported in the usual fashion
-through setserial or using the CBAUDEX extensions. Note that the EasyIO and
-EasyConnection (all types) support at least 57600 and 115200 baud. The newer
-EasyConnection XP modules and new EasyIO boards support 230400 and 460800
-baud as well. The older boards including ONboard and Brumby support a
-maximum baud rate of 38400.
-
-If you are unfamiliar with how to use serial ports, then get the Serial-HOWTO
-by Greg Hankins. It will explain everything you need to know!
-
-
-
-4. NOTES
-
-You can use both drivers at once if you have a mix of board types installed
-in a system. However to do this you will need to change the major numbers
-used by one of the drivers. Currently both drivers use major numbers 24, 25
-and 28 for their devices. Change one driver to use some other major numbers,
-and then modify the mkdevnods script to make device nodes based on those new
-major numbers. For example, you could change the istallion.c driver to use
-major numbers 60, 61 and 62. You will also need to create device nodes with
-different names for the ports, for example ttyF# and cuf#.
-
-The original Stallion board is no longer supported by Stallion Technologies.
-Although it is known to work with the istallion driver.
-
-Finding a free physical memory address range can be a problem. The older
-boards like the Stallion and ONboard need large areas (64K or even 128K), so
-they can be very difficult to get into a system. If you have 16 Mb of RAM
-then you have no choice but to put them somewhere in the 640K -> 1Mb range.
-ONboards require 64K, so typically 0xd0000 is good, or 0xe0000 on some
-systems. If you have an original Stallion board, "V4.0" or Rev.O, then you
-need a 64K memory address space, so again 0xd0000 and 0xe0000 are good.
-Older Stallion boards are a much bigger problem. They need 128K of address
-space and must be on a 128K boundary. If you don't have a VGA card then
-0xc0000 might be usable - there is really no other place you can put them
-below 1Mb.
-
-Both the ONboard and old Stallion boards can use higher memory addresses as
-well, but you must have less than 16Mb of RAM to be able to use them. Usual
-high memory addresses used include 0xec0000 and 0xf00000.
-
-The Brumby boards only require 16Kb of address space, so you can usually
-squeeze them in somewhere. Common addresses are 0xc8000, 0xcc000, or in
-the 0xd0000 range. EasyConnection 8/64 boards are even better, they only
-require 4Kb of address space, again usually 0xc8000, 0xcc000 or 0xd0000
-are good.
-
-If you are using an EasyConnection 8/64-EI or ONboard/E then usually the
-0xd0000 or 0xe0000 ranges are the best options below 1Mb. If neither of
-them can be used then the high memory support to use the really high address
-ranges is the best option. Typically the 2Gb range is convenient for them,
-and gets them well out of the way.
-
-The ports of the EasyIO-8M board do not have DCD or DTR signals. So these
-ports cannot be used as real modem devices. Generally, when using these
-ports you should only use the cueX devices.
-
-The driver utility package contains a couple of very useful programs. One 
-is a serial port statistics collection and display program - very handy
-for solving serial port problems. The other is an extended option setting
-program that works with the intelligent boards.
-
-
-
-5. DISCLAIMER
-
-The information contained in this document is believed to be accurate and
-reliable. However, no responsibility is assumed by Stallion Technologies
-Pty. Ltd. for its use, nor any infringements of patents or other rights
-of third parties resulting from its use. Stallion Technologies reserves
-the right to modify the design of its products and will endeavour to change
-the information in manuals and accompanying documentation accordingly.
-
diff --git a/MAINTAINERS b/MAINTAINERS
index ad7e322ad17b..a996ab582211 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4577,7 +4577,7 @@ F:	fs/jbd2/
 F:	include/linux/jbd2.h
 
 JSM Neo PCI based serial card
-M:	Lucas Tavares <lucaskt@linux.vnet.ibm.com>
+M:	Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
 L:	linux-serial@vger.kernel.org
 S:	Maintained
 F:	drivers/tty/serial/jsm/
diff --git a/arch/alpha/kernel/console.c b/arch/alpha/kernel/console.c
index da711e37fc97..6a61deed4a85 100644
--- a/arch/alpha/kernel/console.c
+++ b/arch/alpha/kernel/console.c
@@ -61,7 +61,9 @@ locate_and_init_vga(void *(*sel_func)(void *, void *))
 
 	/* Set the VGA hose and init the new console. */
 	pci_vga_hose = hose;
-	take_over_console(&vga_con, 0, MAX_NR_CONSOLES-1, 1);
+	console_lock();
+	do_take_over_console(&vga_con, 0, MAX_NR_CONSOLES-1, 1);
+	console_unlock();
 }
 
 void __init
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index ab80a80d38a2..f2360a74e5d5 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -117,7 +117,9 @@ common_shutdown_1(void *generic_ptr)
 		if (in_interrupt())
 			irq_exit();
 		/* This has the effect of resetting the VGA video origin.  */
-		take_over_console(&dummy_con, 0, MAX_NR_CONSOLES-1, 1);
+		console_lock();
+		do_take_over_console(&dummy_con, 0, MAX_NR_CONSOLES-1, 1);
+		console_unlock();
 #endif
 		pci_restore_srm_config();
 		set_hae(srm_hae);
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
index e2e69e1e9fe1..44dd5aa2e36f 100644
--- a/arch/mips/pci/pci-bcm1480.c
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -257,7 +257,9 @@ static int __init bcm1480_pcibios_init(void)
 	register_pci_controller(&bcm1480_controller);
 
 #ifdef CONFIG_VGA_CONSOLE
-	take_over_console(&vga_con, 0, MAX_NR_CONSOLES-1, 1);
+	console_lock();
+	do_take_over_console(&vga_con, 0, MAX_NR_CONSOLES-1, 1);
+	console_unlock();
 #endif
 	return 0;
 }
diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c
index cdefcc4cb8d4..fc634aeda4a5 100644
--- a/arch/mips/pci/pci-sb1250.c
+++ b/arch/mips/pci/pci-sb1250.c
@@ -283,7 +283,9 @@ static int __init sb1250_pcibios_init(void)
 	register_pci_controller(&sb1250_controller);
 
 #ifdef CONFIG_VGA_CONSOLE
-	take_over_console(&vga_con, 0, MAX_NR_CONSOLES - 1, 1);
+	console_lock();
+	do_take_over_console(&vga_con, 0, MAX_NR_CONSOLES - 1, 1);
+	console_unlock();
 #endif
 	return 0;
 }
diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c
index 1e95b2000ce8..7349a3fedfc7 100644
--- a/arch/parisc/kernel/setup.c
+++ b/arch/parisc/kernel/setup.c
@@ -156,7 +156,7 @@ void __init setup_arch(char **cmdline_p)
 #endif
 
 #if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;	/* we use take_over_console() later ! */
+	conswitchp = &dummy_con;	/* we use do_take_over_console() later ! */
 #endif
 
 }
diff --git a/arch/powerpc/include/asm/mpc52xx_psc.h b/arch/powerpc/include/asm/mpc52xx_psc.h
index 2966df604221..d0ece257d310 100644
--- a/arch/powerpc/include/asm/mpc52xx_psc.h
+++ b/arch/powerpc/include/asm/mpc52xx_psc.h
@@ -299,4 +299,53 @@ struct mpc512x_psc_fifo {
 #define rxdata_32 rxdata.rxdata_32
 };
 
+struct mpc5125_psc {
+	u8		mr1;			/* PSC + 0x00 */
+	u8		reserved0[3];
+	u8		mr2;			/* PSC + 0x04 */
+	u8		reserved1[3];
+	struct {
+		u16		status;		/* PSC + 0x08 */
+		u8		reserved2[2];
+		u8		clock_select;	/* PSC + 0x0c */
+		u8		reserved3[3];
+	} sr_csr;
+	u8		command;		/* PSC + 0x10 */
+	u8		reserved4[3];
+	union {					/* PSC + 0x14 */
+		u8		buffer_8;
+		u16		buffer_16;
+		u32		buffer_32;
+	} buffer;
+	struct {
+		u8		ipcr;		/* PSC + 0x18 */
+		u8		reserved5[3];
+		u8		acr;		/* PSC + 0x1c */
+		u8		reserved6[3];
+	} ipcr_acr;
+	struct {
+		u16		isr;		/* PSC + 0x20 */
+		u8		reserved7[2];
+		u16		imr;		/* PSC + 0x24 */
+		u8		reserved8[2];
+	} isr_imr;
+	u8		ctur;			/* PSC + 0x28 */
+	u8		reserved9[3];
+	u8		ctlr;			/* PSC + 0x2c */
+	u8		reserved10[3];
+	u32		ccr;			/* PSC + 0x30 */
+	u32		ac97slots;		/* PSC + 0x34 */
+	u32		ac97cmd;		/* PSC + 0x38 */
+	u32		ac97data;		/* PSC + 0x3c */
+	u8		reserved11[4];
+	u8		ip;			/* PSC + 0x44 */
+	u8		reserved12[3];
+	u8		op1;			/* PSC + 0x48 */
+	u8		reserved13[3];
+	u8		op0;			/* PSC + 0x4c */
+	u8		reserved14[3];
+	u32		sicr;			/* PSC + 0x50 */
+	u8		reserved15[4];	/* make eq. sizeof(mpc52xx_psc) */
+};
+
 #endif  /* __ASM_MPC52xx_PSC_H__ */
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 3bb6fa3930be..14219972c745 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -15,18 +15,6 @@ config DEVKMEM
 	  kind of kernel debugging operations.
 	  When in doubt, say "N".
 
-config STALDRV
-	bool "Stallion multiport serial support"
-	depends on SERIAL_NONSTANDARD
-	help
-	  Stallion cards give you many serial ports.  You would need something
-	  like this to connect more than two modems to your Linux box, for
-	  instance in order to become a dial-in server.  If you say Y here,
-	  you will be asked for your specific card model in the next
-	  questions.  Make sure to read <file:Documentation/serial/stallion.txt>
-	  in this case.  If you have never heard about all this, it's safe to
-	  say N.
-
 config SGI_SNSC
 	bool "SGI Altix system controller communication support"
 	depends on (IA64_SGI_SN2 || IA64_GENERIC)
diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile
index 6b78399bc7c9..58ad1c05b7f8 100644
--- a/drivers/tty/Makefile
+++ b/drivers/tty/Makefile
@@ -1,5 +1,5 @@
 obj-$(CONFIG_TTY)		+= tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o \
-				   tty_buffer.o tty_port.o tty_mutex.o
+				   tty_buffer.o tty_port.o tty_mutex.o tty_ldsem.o
 obj-$(CONFIG_LEGACY_PTYS)	+= pty.o
 obj-$(CONFIG_UNIX98_PTYS)	+= pty.o
 obj-$(CONFIG_AUDIT)		+= tty_audit.o
diff --git a/drivers/tty/hvc/hvc_iucv.c b/drivers/tty/hvc/hvc_iucv.c
index b6f7d52f7c35..9d47f50c2755 100644
--- a/drivers/tty/hvc/hvc_iucv.c
+++ b/drivers/tty/hvc/hvc_iucv.c
@@ -1328,7 +1328,7 @@ out_error:
  */
 static	int __init hvc_iucv_config(char *val)
 {
-	 return strict_strtoul(val, 10, &hvc_iucv_devices);
+	 return kstrtoul(val, 10, &hvc_iucv_devices);
 }
 
 
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 6c7fe90ad72d..4bf0fc0843d7 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -89,6 +89,7 @@ struct n_tty_data {
 	int read_head;
 	int read_tail;
 	int read_cnt;
+	int minimum_to_wake;
 
 	unsigned char *echo_buf;
 	unsigned int echo_pos;
@@ -114,22 +115,25 @@ static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
 }
 
 /**
- *	n_tty_set__room	-	receive space
+ *	n_tty_set_room	-	receive space
  *	@tty: terminal
  *
- *	Called by the driver to find out how much data it is
- *	permitted to feed to the line discipline without any being lost
- *	and thus to manage flow control. Not serialized. Answers for the
- *	"instant".
+ *	Updates tty->receive_room to reflect the currently available space
+ *	in the input buffer, and re-schedules the flip buffer work if space
+ *	just became available.
+ *
+ *	Locks: Concurrent update is protected with read_lock
  */
 
-static void n_tty_set_room(struct tty_struct *tty)
+static int set_room(struct tty_struct *tty)
 {
 	struct n_tty_data *ldata = tty->disc_data;
 	int left;
 	int old_left;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&ldata->read_lock, flags);
 
-	/* ldata->read_cnt is not read locked ? */
 	if (I_PARMRK(tty)) {
 		/* Multiply read_cnt by 3, since each byte might take up to
 		 * three times as many spaces when PARMRK is set (depending on
@@ -149,8 +153,15 @@ static void n_tty_set_room(struct tty_struct *tty)
 	old_left = tty->receive_room;
 	tty->receive_room = left;
 
+	raw_spin_unlock_irqrestore(&ldata->read_lock, flags);
+
+	return left && !old_left;
+}
+
+static void n_tty_set_room(struct tty_struct *tty)
+{
 	/* Did this open up the receive buffer? We may need to flip */
-	if (left && !old_left) {
+	if (set_room(tty)) {
 		WARN_RATELIMIT(tty->port->itty == NULL,
 				"scheduling with invalid itty\n");
 		/* see if ldisc has been killed - if so, this means that
@@ -647,8 +658,7 @@ static void process_echoes(struct tty_struct *tty)
 			if (no_space_left)
 				break;
 		} else {
-			if (O_OPOST(tty) &&
-			    !(test_bit(TTY_HW_COOK_OUT, &tty->flags))) {
+			if (O_OPOST(tty)) {
 				int retval = do_output_char(c, tty, space);
 				if (retval < 0)
 					break;
@@ -1454,9 +1464,9 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
 			tty->ops->flush_chars(tty);
 	}
 
-	n_tty_set_room(tty);
+	set_room(tty);
 
-	if ((!ldata->icanon && (ldata->read_cnt >= tty->minimum_to_wake)) ||
+	if ((!ldata->icanon && (ldata->read_cnt >= ldata->minimum_to_wake)) ||
 		L_EXTPROC(tty)) {
 		kill_fasync(&tty->fasync, SIGIO, POLL_IN);
 		if (waitqueue_active(&tty->read_wait))
@@ -1516,12 +1526,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
 		wake_up_interruptible(&tty->read_wait);
 
 	ldata->icanon = (L_ICANON(tty) != 0);
-	if (test_bit(TTY_HW_COOK_IN, &tty->flags)) {
-		ldata->raw = 1;
-		ldata->real_raw = 1;
-		n_tty_set_room(tty);
-		return;
-	}
+
 	if (I_ISTRIP(tty) || I_IUCLC(tty) || I_IGNCR(tty) ||
 	    I_ICRNL(tty) || I_INLCR(tty) || L_ICANON(tty) ||
 	    I_IXON(tty) || L_ISIG(tty) || L_ECHO(tty) ||
@@ -1642,7 +1647,7 @@ static int n_tty_open(struct tty_struct *tty)
 	tty->disc_data = ldata;
 	reset_buffer_flags(tty->disc_data);
 	ldata->column = 0;
-	tty->minimum_to_wake = 1;
+	ldata->minimum_to_wake = 1;
 	tty->closing = 0;
 	/* indicate buffer work may resume */
 	clear_bit(TTY_LDISC_HALTED, &tty->flags);
@@ -1806,21 +1811,17 @@ do_it_again:
 	minimum = time = 0;
 	timeout = MAX_SCHEDULE_TIMEOUT;
 	if (!ldata->icanon) {
-		time = (HZ / 10) * TIME_CHAR(tty);
 		minimum = MIN_CHAR(tty);
 		if (minimum) {
+			time = (HZ / 10) * TIME_CHAR(tty);
 			if (time)
-				tty->minimum_to_wake = 1;
+				ldata->minimum_to_wake = 1;
 			else if (!waitqueue_active(&tty->read_wait) ||
-				 (tty->minimum_to_wake > minimum))
-				tty->minimum_to_wake = minimum;
+				 (ldata->minimum_to_wake > minimum))
+				ldata->minimum_to_wake = minimum;
 		} else {
-			timeout = 0;
-			if (time) {
-				timeout = time;
-				time = 0;
-			}
-			tty->minimum_to_wake = minimum = 1;
+			timeout = (HZ / 10) * TIME_CHAR(tty);
+			ldata->minimum_to_wake = minimum = 1;
 		}
 	}
 
@@ -1860,9 +1861,9 @@ do_it_again:
 		   TASK_RUNNING. */
 		set_current_state(TASK_INTERRUPTIBLE);
 
-		if (((minimum - (b - buf)) < tty->minimum_to_wake) &&
+		if (((minimum - (b - buf)) < ldata->minimum_to_wake) &&
 		    ((minimum - (b - buf)) >= 1))
-			tty->minimum_to_wake = (minimum - (b - buf));
+			ldata->minimum_to_wake = (minimum - (b - buf));
 
 		if (!input_available_p(tty, 0)) {
 			if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) {
@@ -1881,7 +1882,6 @@ do_it_again:
 				retval = -ERESTARTSYS;
 				break;
 			}
-			/* FIXME: does n_tty_set_room need locking ? */
 			n_tty_set_room(tty);
 			timeout = schedule_timeout(timeout);
 			continue;
@@ -1979,7 +1979,7 @@ do_it_again:
 	remove_wait_queue(&tty->read_wait, &wait);
 
 	if (!waitqueue_active(&tty->read_wait))
-		tty->minimum_to_wake = minimum;
+		ldata->minimum_to_wake = minimum;
 
 	__set_current_state(TASK_RUNNING);
 	size = b - buf;
@@ -2045,7 +2045,7 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file,
 			retval = -EIO;
 			break;
 		}
-		if (O_OPOST(tty) && !(test_bit(TTY_HW_COOK_OUT, &tty->flags))) {
+		if (O_OPOST(tty)) {
 			while (nr > 0) {
 				ssize_t num = process_output_block(tty, b, nr);
 				if (num < 0) {
@@ -2111,6 +2111,7 @@ break_out:
 static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file,
 							poll_table *wait)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	unsigned int mask = 0;
 
 	poll_wait(file, &tty->read_wait, wait);
@@ -2125,9 +2126,9 @@ static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file,
 		mask |= POLLHUP;
 	if (!(mask & (POLLHUP | POLLIN | POLLRDNORM))) {
 		if (MIN_CHAR(tty) && !TIME_CHAR(tty))
-			tty->minimum_to_wake = MIN_CHAR(tty);
+			ldata->minimum_to_wake = MIN_CHAR(tty);
 		else
-			tty->minimum_to_wake = 1;
+			ldata->minimum_to_wake = 1;
 	}
 	if (tty->ops->write && !tty_is_writelocked(tty) &&
 			tty_chars_in_buffer(tty) < WAKEUP_CHARS &&
@@ -2175,6 +2176,18 @@ static int n_tty_ioctl(struct tty_struct *tty, struct file *file,
 	}
 }
 
+static void n_tty_fasync(struct tty_struct *tty, int on)
+{
+	struct n_tty_data *ldata = tty->disc_data;
+
+	if (!waitqueue_active(&tty->read_wait)) {
+		if (on)
+			ldata->minimum_to_wake = 1;
+		else if (!tty->fasync)
+			ldata->minimum_to_wake = N_TTY_BUF_SIZE;
+	}
+}
+
 struct tty_ldisc_ops tty_ldisc_N_TTY = {
 	.magic           = TTY_LDISC_MAGIC,
 	.name            = "n_tty",
@@ -2188,7 +2201,8 @@ struct tty_ldisc_ops tty_ldisc_N_TTY = {
 	.set_termios     = n_tty_set_termios,
 	.poll            = n_tty_poll,
 	.receive_buf     = n_tty_receive_buf,
-	.write_wakeup    = n_tty_write_wakeup
+	.write_wakeup    = n_tty_write_wakeup,
+	.fasync		 = n_tty_fasync,
 };
 
 /**
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 26e3a97ab157..c52948b368d8 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -4797,10 +4797,6 @@ static struct pci_device_id serial_pci_tbl[] = {
 		PCI_VENDOR_ID_IBM, 0x0299,
 		0, 0, pbn_b0_bt_2_115200 },
 
-	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
-		0x1000, 0x0012,
-		0, 0, pbn_b0_bt_2_115200 },
-
 	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
 		0xA000, 0x1000,
 		0, 0, pbn_b0_1_115200 },
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 80fe91e64a52..a1ba94d64885 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -12,9 +12,8 @@ config SERIAL_8250
 	  here are those that are setting up dedicated Ethernet WWW/FTP
 	  servers, or users that have one of the various bus mice instead of a
 	  serial mouse and don't intend to use their machine's standard serial
-	  port for anything.  (Note that the Cyclades and Stallion multi
-	  serial port drivers do not need this driver built in for them to
-	  work.)
+	  port for anything.  (Note that the Cyclades multi serial port driver
+	  does not need this driver built in for it to work.)
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called 8250.
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 7e7006fd404e..46dd1c72feda 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -551,7 +551,7 @@ config BFIN_UART3_CTSRTS
 	  Enable hardware flow control in the driver.
 
 config SERIAL_IMX
-	bool "IMX serial port support"
+	tristate "IMX serial port support"
 	depends on ARCH_MXC
 	select SERIAL_CORE
 	select RATIONAL
@@ -561,22 +561,21 @@ config SERIAL_IMX
 
 config SERIAL_IMX_CONSOLE
 	bool "Console on IMX serial port"
-	depends on SERIAL_IMX
+	depends on SERIAL_IMX=y
 	select SERIAL_CORE_CONSOLE
 	help
-	  If you have enabled the serial port on the Motorola IMX
+	  If you have enabled the serial port on the Freescale IMX
 	  CPU you can make it the console by answering Y to this option.
 
 	  Even if you say Y here, the currently visible virtual console
 	  (/dev/tty0) will still be used as the system console by default, but
 	  you can alter that using a kernel command line option such as
-	  "console=ttySA0". (Try "man bootparam" or see the documentation of
-	  your boot loader (lilo or loadlin) about how to pass options to the
-	  kernel at boot time.)
+	  "console=ttymxc0". (Try "man bootparam" or see the documentation of
+	  your bootloader about how to pass options to the kernel at boot time.)
 
 config SERIAL_UARTLITE
 	tristate "Xilinx uartlite serial port support"
-	depends on PPC32 || MICROBLAZE || MFD_TIMBERDALE
+	depends on PPC32 || MICROBLAZE || MFD_TIMBERDALE || ARCH_ZYNQ
 	select SERIAL_CORE
 	help
 	  Say Y here if you want to use the Xilinx uartlite serial controller.
@@ -1484,6 +1483,20 @@ config SERIAL_RP2_NR_UARTS
 	  If multiple cards are present, the default limit of 32 ports may
 	  need to be increased.
 
+config SERIAL_FSL_LPUART
+	tristate "Freescale lpuart serial port support"
+	select SERIAL_CORE
+	help
+	  Support for the on-chip lpuart on some Freescale SOCs.
+
+config SERIAL_FSL_LPUART_CONSOLE
+	bool "Console on Freescale lpuart serial port"
+	depends on SERIAL_FSL_LPUART=y
+	select SERIAL_CORE_CONSOLE
+	help
+	  If you have enabled the lpuart serial port on the Freescale SoCs,
+	  you can make it the console by answering Y to this option.
+
 endmenu
 
 endif # TTY
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index eedfec40e3dd..cf650f0cd6e4 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -85,3 +85,4 @@ obj-$(CONFIG_SERIAL_AR933X)   += ar933x_uart.o
 obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o
 obj-$(CONFIG_SERIAL_ARC)	+= arc_uart.o
 obj-$(CONFIG_SERIAL_RP2)	+= rp2.o
+obj-$(CONFIG_SERIAL_FSL_LPUART)	+= fsl_lpuart.o
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 13471dd95793..1d46966e2a65 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -604,7 +604,6 @@ static int altera_uart_remove(struct platform_device *pdev)
 
 	if (port) {
 		uart_remove_one_port(&altera_uart_driver, port);
-		platform_set_drvdata(pdev, NULL);
 		port->mapbase = 0;
 	}
 
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index e2774f9ecd59..ad41319d1d9b 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -79,13 +79,12 @@ struct vendor_data {
 	bool			dma_threshold;
 	bool			cts_event_workaround;
 
-	unsigned int (*get_fifosize)(unsigned int periphid);
+	unsigned int (*get_fifosize)(struct amba_device *dev);
 };
 
-static unsigned int get_fifosize_arm(unsigned int periphid)
+static unsigned int get_fifosize_arm(struct amba_device *dev)
 {
-	unsigned int rev = (periphid >> 20) & 0xf;
-	return rev < 3 ? 16 : 32;
+	return amba_rev(dev) < 3 ? 16 : 32;
 }
 
 static struct vendor_data vendor_arm = {
@@ -98,7 +97,7 @@ static struct vendor_data vendor_arm = {
 	.get_fifosize		= get_fifosize_arm,
 };
 
-static unsigned int get_fifosize_st(unsigned int periphid)
+static unsigned int get_fifosize_st(struct amba_device *dev)
 {
 	return 64;
 }
@@ -2157,7 +2156,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 	uap->lcrh_rx = vendor->lcrh_rx;
 	uap->lcrh_tx = vendor->lcrh_tx;
 	uap->old_cr = 0;
-	uap->fifosize = vendor->get_fifosize(dev->periphid);
+	uap->fifosize = vendor->get_fifosize(dev);
 	uap->port.dev = &dev->dev;
 	uap->port.mapbase = dev->res.start;
 	uap->port.membase = base;
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 3467462869ce..691265faebbe 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1100,7 +1100,7 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state,
 		 * Enable the peripheral clock for this serial port.
 		 * This is called on uart_open() or a resume event.
 		 */
-		clk_enable(atmel_port->clk);
+		clk_prepare_enable(atmel_port->clk);
 
 		/* re-enable interrupts if we disabled some on suspend */
 		UART_PUT_IER(port, atmel_port->backup_imr);
@@ -1114,7 +1114,7 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state,
 		 * Disable the peripheral clock for this serial port.
 		 * This is called on uart_close() or a suspend event.
 		 */
-		clk_disable(atmel_port->clk);
+		clk_disable_unprepare(atmel_port->clk);
 		break;
 	default:
 		printk(KERN_ERR "atmel_serial: unknown pm %d\n", state);
@@ -1458,9 +1458,10 @@ static void atmel_of_init_port(struct atmel_uart_port *atmel_port,
 /*
  * Configure the port from the platform device resource info.
  */
-static void atmel_init_port(struct atmel_uart_port *atmel_port,
+static int atmel_init_port(struct atmel_uart_port *atmel_port,
 				      struct platform_device *pdev)
 {
+	int ret;
 	struct uart_port *port = &atmel_port->uart;
 	struct atmel_uart_data *pdata = pdev->dev.platform_data;
 
@@ -1496,9 +1497,19 @@ static void atmel_init_port(struct atmel_uart_port *atmel_port,
 	/* for console, the clock could already be configured */
 	if (!atmel_port->clk) {
 		atmel_port->clk = clk_get(&pdev->dev, "usart");
-		clk_enable(atmel_port->clk);
+		if (IS_ERR(atmel_port->clk)) {
+			ret = PTR_ERR(atmel_port->clk);
+			atmel_port->clk = NULL;
+			return ret;
+		}
+		ret = clk_prepare_enable(atmel_port->clk);
+		if (ret) {
+			clk_put(atmel_port->clk);
+			atmel_port->clk = NULL;
+			return ret;
+		}
 		port->uartclk = clk_get_rate(atmel_port->clk);
-		clk_disable(atmel_port->clk);
+		clk_disable_unprepare(atmel_port->clk);
 		/* only enable clock when USART is in use */
 	}
 
@@ -1511,6 +1522,8 @@ static void atmel_init_port(struct atmel_uart_port *atmel_port,
 	} else {
 		atmel_port->tx_done_mask = ATMEL_US_TXRDY;
 	}
+
+	return 0;
 }
 
 struct platform_device *atmel_default_console_device;	/* the serial console device */
@@ -1601,6 +1614,7 @@ static void __init atmel_console_get_options(struct uart_port *port, int *baud,
 
 static int __init atmel_console_setup(struct console *co, char *options)
 {
+	int ret;
 	struct uart_port *port = &atmel_ports[co->index].uart;
 	int baud = 115200;
 	int bits = 8;
@@ -1612,7 +1626,9 @@ static int __init atmel_console_setup(struct console *co, char *options)
 		return -ENODEV;
 	}
 
-	clk_enable(atmel_ports[co->index].clk);
+	ret = clk_prepare_enable(atmel_ports[co->index].clk);
+	if (ret)
+		return ret;
 
 	UART_PUT_IDR(port, -1);
 	UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
@@ -1645,6 +1661,7 @@ static struct console atmel_console = {
  */
 static int __init atmel_console_init(void)
 {
+	int ret;
 	if (atmel_default_console_device) {
 		struct atmel_uart_data *pdata =
 			atmel_default_console_device->dev.platform_data;
@@ -1655,7 +1672,9 @@ static int __init atmel_console_init(void)
 		port->uart.line = id;
 
 		add_preferred_console(ATMEL_DEVICENAME, id, NULL);
-		atmel_init_port(port, atmel_default_console_device);
+		ret = atmel_init_port(port, atmel_default_console_device);
+		if (ret)
+			return ret;
 		register_console(&atmel_console);
 	}
 
@@ -1786,7 +1805,9 @@ static int atmel_serial_probe(struct platform_device *pdev)
 	port->backup_imr = 0;
 	port->uart.line = ret;
 
-	atmel_init_port(port, pdev);
+	ret = atmel_init_port(port, pdev);
+	if (ret)
+		goto err;
 
 	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
 	if (IS_ERR(pinctrl)) {
@@ -1812,9 +1833,9 @@ static int atmel_serial_probe(struct platform_device *pdev)
 			&& ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) {
 		/*
 		 * The serial core enabled the clock for us, so undo
-		 * the clk_enable() in atmel_console_setup()
+		 * the clk_prepare_enable() in atmel_console_setup()
 		 */
-		clk_disable(port->clk);
+		clk_disable_unprepare(port->clk);
 	}
 #endif
 
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index 97f4e1858649..f7672cae5321 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -1384,7 +1384,7 @@ static int cpm_uart_probe(struct platform_device *ofdev)
 	if (index >= UART_NR)
 		return -ENODEV;
 
-	dev_set_drvdata(&ofdev->dev, pinfo);
+	platform_set_drvdata(ofdev, pinfo);
 
 	/* initialize the device pointer for the port */
 	pinfo->port.dev = &ofdev->dev;
@@ -1398,7 +1398,7 @@ static int cpm_uart_probe(struct platform_device *ofdev)
 
 static int cpm_uart_remove(struct platform_device *ofdev)
 {
-	struct uart_cpm_port *pinfo = dev_get_drvdata(&ofdev->dev);
+	struct uart_cpm_port *pinfo = platform_get_drvdata(ofdev);
 	return uart_remove_one_port(&cpm_reg, &pinfo->port);
 }
 
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
new file mode 100644
index 000000000000..263cfaabe9e2
--- /dev/null
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -0,0 +1,874 @@
+/*
+ *  Freescale lpuart serial port driver
+ *
+ *  Copyright 2012-2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#if defined(CONFIG_SERIAL_FSL_LPUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/console.h>
+#include <linux/serial_core.h>
+#include <linux/tty_flip.h>
+
+/* All registers are 8-bit width */
+#define UARTBDH			0x00
+#define UARTBDL			0x01
+#define UARTCR1			0x02
+#define UARTCR2			0x03
+#define UARTSR1			0x04
+#define UARTCR3			0x06
+#define UARTDR			0x07
+#define UARTCR4			0x0a
+#define UARTCR5			0x0b
+#define UARTMODEM		0x0d
+#define UARTPFIFO		0x10
+#define UARTCFIFO		0x11
+#define UARTSFIFO		0x12
+#define UARTTWFIFO		0x13
+#define UARTTCFIFO		0x14
+#define UARTRWFIFO		0x15
+
+#define UARTBDH_LBKDIE		0x80
+#define UARTBDH_RXEDGIE		0x40
+#define UARTBDH_SBR_MASK	0x1f
+
+#define UARTCR1_LOOPS		0x80
+#define UARTCR1_RSRC		0x20
+#define UARTCR1_M		0x10
+#define UARTCR1_WAKE		0x08
+#define UARTCR1_ILT		0x04
+#define UARTCR1_PE		0x02
+#define UARTCR1_PT		0x01
+
+#define UARTCR2_TIE		0x80
+#define UARTCR2_TCIE		0x40
+#define UARTCR2_RIE		0x20
+#define UARTCR2_ILIE		0x10
+#define UARTCR2_TE		0x08
+#define UARTCR2_RE		0x04
+#define UARTCR2_RWU		0x02
+#define UARTCR2_SBK		0x01
+
+#define UARTSR1_TDRE		0x80
+#define UARTSR1_TC		0x40
+#define UARTSR1_RDRF		0x20
+#define UARTSR1_IDLE		0x10
+#define UARTSR1_OR		0x08
+#define UARTSR1_NF		0x04
+#define UARTSR1_FE		0x02
+#define UARTSR1_PE		0x01
+
+#define UARTCR3_R8		0x80
+#define UARTCR3_T8		0x40
+#define UARTCR3_TXDIR		0x20
+#define UARTCR3_TXINV		0x10
+#define UARTCR3_ORIE		0x08
+#define UARTCR3_NEIE		0x04
+#define UARTCR3_FEIE		0x02
+#define UARTCR3_PEIE		0x01
+
+#define UARTCR4_MAEN1		0x80
+#define UARTCR4_MAEN2		0x40
+#define UARTCR4_M10		0x20
+#define UARTCR4_BRFA_MASK	0x1f
+#define UARTCR4_BRFA_OFF	0
+
+#define UARTCR5_TDMAS		0x80
+#define UARTCR5_RDMAS		0x20
+
+#define UARTMODEM_RXRTSE	0x08
+#define UARTMODEM_TXRTSPOL	0x04
+#define UARTMODEM_TXRTSE	0x02
+#define UARTMODEM_TXCTSE	0x01
+
+#define UARTPFIFO_TXFE		0x80
+#define UARTPFIFO_FIFOSIZE_MASK	0x7
+#define UARTPFIFO_TXSIZE_OFF	4
+#define UARTPFIFO_RXFE		0x08
+#define UARTPFIFO_RXSIZE_OFF	0
+
+#define UARTCFIFO_TXFLUSH	0x80
+#define UARTCFIFO_RXFLUSH	0x40
+#define UARTCFIFO_RXOFE		0x04
+#define UARTCFIFO_TXOFE		0x02
+#define UARTCFIFO_RXUFE		0x01
+
+#define UARTSFIFO_TXEMPT	0x80
+#define UARTSFIFO_RXEMPT	0x40
+#define UARTSFIFO_RXOF		0x04
+#define UARTSFIFO_TXOF		0x02
+#define UARTSFIFO_RXUF		0x01
+
+#define DRIVER_NAME	"fsl-lpuart"
+#define DEV_NAME	"ttyLP"
+#define UART_NR		6
+
+struct lpuart_port {
+	struct uart_port	port;
+	struct clk		*clk;
+	unsigned int		txfifo_size;
+	unsigned int		rxfifo_size;
+};
+
+static struct of_device_id lpuart_dt_ids[] = {
+	{
+		.compatible = "fsl,vf610-lpuart",
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, lpuart_dt_ids);
+
+static void lpuart_stop_tx(struct uart_port *port)
+{
+	unsigned char temp;
+
+	temp = readb(port->membase + UARTCR2);
+	temp &= ~(UARTCR2_TIE | UARTCR2_TCIE);
+	writeb(temp, port->membase + UARTCR2);
+}
+
+static void lpuart_stop_rx(struct uart_port *port)
+{
+	unsigned char temp;
+
+	temp = readb(port->membase + UARTCR2);
+	writeb(temp & ~UARTCR2_RE, port->membase + UARTCR2);
+}
+
+static void lpuart_enable_ms(struct uart_port *port)
+{
+}
+
+static inline void lpuart_transmit_buffer(struct lpuart_port *sport)
+{
+	struct circ_buf *xmit = &sport->port.state->xmit;
+
+	while (!uart_circ_empty(xmit) &&
+		(readb(sport->port.membase + UARTTCFIFO) < sport->txfifo_size)) {
+		writeb(xmit->buf[xmit->tail], sport->port.membase + UARTDR);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		sport->port.icount.tx++;
+	}
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(&sport->port);
+
+	if (uart_circ_empty(xmit))
+		lpuart_stop_tx(&sport->port);
+}
+
+static void lpuart_start_tx(struct uart_port *port)
+{
+	struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
+	unsigned char temp;
+
+	temp = readb(port->membase + UARTCR2);
+	writeb(temp | UARTCR2_TIE, port->membase + UARTCR2);
+
+	if (readb(port->membase + UARTSR1) & UARTSR1_TDRE)
+		lpuart_transmit_buffer(sport);
+}
+
+static irqreturn_t lpuart_txint(int irq, void *dev_id)
+{
+	struct lpuart_port *sport = dev_id;
+	struct circ_buf *xmit = &sport->port.state->xmit;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sport->port.lock, flags);
+	if (sport->port.x_char) {
+		writeb(sport->port.x_char, sport->port.membase + UARTDR);
+		goto out;
+	}
+
+	if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
+		lpuart_stop_tx(&sport->port);
+		goto out;
+	}
+
+	lpuart_transmit_buffer(sport);
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(&sport->port);
+
+out:
+	spin_unlock_irqrestore(&sport->port.lock, flags);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t lpuart_rxint(int irq, void *dev_id)
+{
+	struct lpuart_port *sport = dev_id;
+	unsigned int flg, ignored = 0;
+	struct tty_port *port = &sport->port.state->port;
+	unsigned long flags;
+	unsigned char rx, sr;
+
+	spin_lock_irqsave(&sport->port.lock, flags);
+
+	while (!(readb(sport->port.membase + UARTSFIFO) & UARTSFIFO_RXEMPT)) {
+		flg = TTY_NORMAL;
+		sport->port.icount.rx++;
+		/*
+		 * to clear the FE, OR, NF, FE, PE flags,
+		 * read SR1 then read DR
+		 */
+		sr = readb(sport->port.membase + UARTSR1);
+		rx = readb(sport->port.membase + UARTDR);
+
+		if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx))
+			continue;
+
+		if (sr & (UARTSR1_PE | UARTSR1_OR | UARTSR1_FE)) {
+			if (sr & UARTSR1_PE)
+				sport->port.icount.parity++;
+			else if (sr & UARTSR1_FE)
+				sport->port.icount.frame++;
+
+			if (sr & UARTSR1_OR)
+				sport->port.icount.overrun++;
+
+			if (sr & sport->port.ignore_status_mask) {
+				if (++ignored > 100)
+					goto out;
+				continue;
+			}
+
+			sr &= sport->port.read_status_mask;
+
+			if (sr & UARTSR1_PE)
+				flg = TTY_PARITY;
+			else if (sr & UARTSR1_FE)
+				flg = TTY_FRAME;
+
+			if (sr & UARTSR1_OR)
+				flg = TTY_OVERRUN;
+
+#ifdef SUPPORT_SYSRQ
+			sport->port.sysrq = 0;
+#endif
+		}
+
+		tty_insert_flip_char(port, rx, flg);
+	}
+
+out:
+	spin_unlock_irqrestore(&sport->port.lock, flags);
+
+	tty_flip_buffer_push(port);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t lpuart_int(int irq, void *dev_id)
+{
+	struct lpuart_port *sport = dev_id;
+	unsigned char sts;
+
+	sts = readb(sport->port.membase + UARTSR1);
+
+	if (sts & UARTSR1_RDRF)
+		lpuart_rxint(irq, dev_id);
+
+	if (sts & UARTSR1_TDRE &&
+		!(readb(sport->port.membase + UARTCR5) & UARTCR5_TDMAS))
+		lpuart_txint(irq, dev_id);
+
+	return IRQ_HANDLED;
+}
+
+/* return TIOCSER_TEMT when transmitter is not busy */
+static unsigned int lpuart_tx_empty(struct uart_port *port)
+{
+	return (readb(port->membase + UARTSR1) & UARTSR1_TC) ?
+		TIOCSER_TEMT : 0;
+}
+
+static unsigned int lpuart_get_mctrl(struct uart_port *port)
+{
+	unsigned int temp = 0;
+	unsigned char reg;
+
+	reg = readb(port->membase + UARTMODEM);
+	if (reg & UARTMODEM_TXCTSE)
+		temp |= TIOCM_CTS;
+
+	if (reg & UARTMODEM_RXRTSE)
+		temp |= TIOCM_RTS;
+
+	return temp;
+}
+
+static void lpuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	unsigned char temp;
+
+	temp = readb(port->membase + UARTMODEM) &
+			~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);
+
+	if (mctrl & TIOCM_RTS)
+		temp |= UARTMODEM_RXRTSE;
+
+	if (mctrl & TIOCM_CTS)
+		temp |= UARTMODEM_TXCTSE;
+
+	writeb(temp, port->membase + UARTMODEM);
+}
+
+static void lpuart_break_ctl(struct uart_port *port, int break_state)
+{
+	unsigned char temp;
+
+	temp = readb(port->membase + UARTCR2) & ~UARTCR2_SBK;
+
+	if (break_state != 0)
+		temp |= UARTCR2_SBK;
+
+	writeb(temp, port->membase + UARTCR2);
+}
+
+static void lpuart_setup_watermark(struct lpuart_port *sport)
+{
+	unsigned char val, cr2;
+
+	cr2 = readb(sport->port.membase + UARTCR2);
+	cr2 &= ~(UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_TE |
+			UARTCR2_RIE | UARTCR2_RE);
+	writeb(cr2, sport->port.membase + UARTCR2);
+
+	/* determine FIFO size and enable FIFO mode */
+	val = readb(sport->port.membase + UARTPFIFO);
+
+	sport->txfifo_size = 0x1 << (((val >> UARTPFIFO_TXSIZE_OFF) &
+		UARTPFIFO_FIFOSIZE_MASK) + 1);
+
+	sport->rxfifo_size = 0x1 << (((val >> UARTPFIFO_RXSIZE_OFF) &
+		UARTPFIFO_FIFOSIZE_MASK) + 1);
+
+	writeb(val | UARTPFIFO_TXFE | UARTPFIFO_RXFE,
+			sport->port.membase + UARTPFIFO);
+
+	/* flush Tx and Rx FIFO */
+	writeb(UARTCFIFO_TXFLUSH | UARTCFIFO_RXFLUSH,
+			sport->port.membase + UARTCFIFO);
+
+	writeb(2, sport->port.membase + UARTTWFIFO);
+	writeb(1, sport->port.membase + UARTRWFIFO);
+}
+
+static int lpuart_startup(struct uart_port *port)
+{
+	struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
+	int ret;
+	unsigned long flags;
+	unsigned char temp;
+
+	ret = devm_request_irq(port->dev, port->irq, lpuart_int, 0,
+				DRIVER_NAME, sport);
+	if (ret)
+		return ret;
+
+	spin_lock_irqsave(&sport->port.lock, flags);
+
+	lpuart_setup_watermark(sport);
+
+	temp = readb(sport->port.membase + UARTCR2);
+	temp |= (UARTCR2_RIE | UARTCR2_TIE | UARTCR2_RE | UARTCR2_TE);
+	writeb(temp, sport->port.membase + UARTCR2);
+
+	spin_unlock_irqrestore(&sport->port.lock, flags);
+	return 0;
+}
+
+static void lpuart_shutdown(struct uart_port *port)
+{
+	struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
+	unsigned char temp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* disable Rx/Tx and interrupts */
+	temp = readb(port->membase + UARTCR2);
+	temp &= ~(UARTCR2_TE | UARTCR2_RE |
+			UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_RIE);
+	writeb(temp, port->membase + UARTCR2);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	devm_free_irq(port->dev, port->irq, sport);
+}
+
+static void
+lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
+		   struct ktermios *old)
+{
+	struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
+	unsigned long flags;
+	unsigned char cr1, old_cr1, old_cr2, cr4, bdh, modem;
+	unsigned int  baud;
+	unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
+	unsigned int sbr, brfa;
+
+	cr1 = old_cr1 = readb(sport->port.membase + UARTCR1);
+	old_cr2 = readb(sport->port.membase + UARTCR2);
+	cr4 = readb(sport->port.membase + UARTCR4);
+	bdh = readb(sport->port.membase + UARTBDH);
+	modem = readb(sport->port.membase + UARTMODEM);
+	/*
+	 * only support CS8 and CS7, and for CS7 must enable PE.
+	 * supported mode:
+	 *  - (7,e/o,1)
+	 *  - (8,n,1)
+	 *  - (8,m/s,1)
+	 *  - (8,e/o,1)
+	 */
+	while ((termios->c_cflag & CSIZE) != CS8 &&
+		(termios->c_cflag & CSIZE) != CS7) {
+		termios->c_cflag &= ~CSIZE;
+		termios->c_cflag |= old_csize;
+		old_csize = CS8;
+	}
+
+	if ((termios->c_cflag & CSIZE) == CS8 ||
+		(termios->c_cflag & CSIZE) == CS7)
+		cr1 = old_cr1 & ~UARTCR1_M;
+
+	if (termios->c_cflag & CMSPAR) {
+		if ((termios->c_cflag & CSIZE) != CS8) {
+			termios->c_cflag &= ~CSIZE;
+			termios->c_cflag |= CS8;
+		}
+		cr1 |= UARTCR1_M;
+	}
+
+	if (termios->c_cflag & CRTSCTS) {
+		modem |= (UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);
+	} else {
+		termios->c_cflag &= ~CRTSCTS;
+		modem &= ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);
+	}
+
+	if (termios->c_cflag & CSTOPB)
+		termios->c_cflag &= ~CSTOPB;
+
+	/* parity must be enabled when CS7 to match 8-bits format */
+	if ((termios->c_cflag & CSIZE) == CS7)
+		termios->c_cflag |= PARENB;
+
+	if ((termios->c_cflag & PARENB)) {
+		if (termios->c_cflag & CMSPAR) {
+			cr1 &= ~UARTCR1_PE;
+			cr1 |= UARTCR1_M;
+		} else {
+			cr1 |= UARTCR1_PE;
+			if ((termios->c_cflag & CSIZE) == CS8)
+				cr1 |= UARTCR1_M;
+			if (termios->c_cflag & PARODD)
+				cr1 |= UARTCR1_PT;
+			else
+				cr1 &= ~UARTCR1_PT;
+		}
+	}
+
+	/* ask the core to calculate the divisor */
+	baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
+
+	spin_lock_irqsave(&sport->port.lock, flags);
+
+	sport->port.read_status_mask = 0;
+	if (termios->c_iflag & INPCK)
+		sport->port.read_status_mask |=	(UARTSR1_FE | UARTSR1_PE);
+	if (termios->c_iflag & (BRKINT | PARMRK))
+		sport->port.read_status_mask |= UARTSR1_FE;
+
+	/* characters to ignore */
+	sport->port.ignore_status_mask = 0;
+	if (termios->c_iflag & IGNPAR)
+		sport->port.ignore_status_mask |= UARTSR1_PE;
+	if (termios->c_iflag & IGNBRK) {
+		sport->port.ignore_status_mask |= UARTSR1_FE;
+		/*
+		 * if we're ignoring parity and break indicators,
+		 * ignore overruns too (for real raw support).
+		 */
+		if (termios->c_iflag & IGNPAR)
+			sport->port.ignore_status_mask |= UARTSR1_OR;
+	}
+
+	/* update the per-port timeout */
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	/* wait transmit engin complete */
+	while (!(readb(sport->port.membase + UARTSR1) & UARTSR1_TC))
+		barrier();
+
+	/* disable transmit and receive */
+	writeb(old_cr2 & ~(UARTCR2_TE | UARTCR2_RE),
+			sport->port.membase + UARTCR2);
+
+	sbr = sport->port.uartclk / (16 * baud);
+	brfa = ((sport->port.uartclk - (16 * sbr * baud)) * 2) / baud;
+	bdh &= ~UARTBDH_SBR_MASK;
+	bdh |= (sbr >> 8) & 0x1F;
+	cr4 &= ~UARTCR4_BRFA_MASK;
+	brfa &= UARTCR4_BRFA_MASK;
+	writeb(cr4 | brfa, sport->port.membase + UARTCR4);
+	writeb(bdh, sport->port.membase + UARTBDH);
+	writeb(sbr & 0xFF, sport->port.membase + UARTBDL);
+	writeb(cr1, sport->port.membase + UARTCR1);
+	writeb(modem, sport->port.membase + UARTMODEM);
+
+	/* restore control register */
+	writeb(old_cr2, sport->port.membase + UARTCR2);
+
+	spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
+static const char *lpuart_type(struct uart_port *port)
+{
+	return "FSL_LPUART";
+}
+
+static void lpuart_release_port(struct uart_port *port)
+{
+	/* nothing to do */
+}
+
+static int lpuart_request_port(struct uart_port *port)
+{
+	return  0;
+}
+
+/* configure/autoconfigure the port */
+static void lpuart_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE)
+		port->type = PORT_LPUART;
+}
+
+static int lpuart_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+	int ret = 0;
+
+	if (ser->type != PORT_UNKNOWN && ser->type != PORT_LPUART)
+		ret = -EINVAL;
+	if (port->irq != ser->irq)
+		ret = -EINVAL;
+	if (ser->io_type != UPIO_MEM)
+		ret = -EINVAL;
+	if (port->uartclk / 16 != ser->baud_base)
+		ret = -EINVAL;
+	if (port->iobase != ser->port)
+		ret = -EINVAL;
+	if (ser->hub6 != 0)
+		ret = -EINVAL;
+	return ret;
+}
+
+static struct uart_ops lpuart_pops = {
+	.tx_empty	= lpuart_tx_empty,
+	.set_mctrl	= lpuart_set_mctrl,
+	.get_mctrl	= lpuart_get_mctrl,
+	.stop_tx	= lpuart_stop_tx,
+	.start_tx	= lpuart_start_tx,
+	.stop_rx	= lpuart_stop_rx,
+	.enable_ms	= lpuart_enable_ms,
+	.break_ctl	= lpuart_break_ctl,
+	.startup	= lpuart_startup,
+	.shutdown	= lpuart_shutdown,
+	.set_termios	= lpuart_set_termios,
+	.type		= lpuart_type,
+	.request_port	= lpuart_request_port,
+	.release_port	= lpuart_release_port,
+	.config_port	= lpuart_config_port,
+	.verify_port	= lpuart_verify_port,
+};
+
+static struct lpuart_port *lpuart_ports[UART_NR];
+
+#ifdef CONFIG_SERIAL_FSL_LPUART_CONSOLE
+static void lpuart_console_putchar(struct uart_port *port, int ch)
+{
+	while (!(readb(port->membase + UARTSR1) & UARTSR1_TDRE))
+		barrier();
+
+	writeb(ch, port->membase + UARTDR);
+}
+
+static void
+lpuart_console_write(struct console *co, const char *s, unsigned int count)
+{
+	struct lpuart_port *sport = lpuart_ports[co->index];
+	unsigned char  old_cr2, cr2;
+
+	/* first save CR2 and then disable interrupts */
+	cr2 = old_cr2 = readb(sport->port.membase + UARTCR2);
+	cr2 |= (UARTCR2_TE |  UARTCR2_RE);
+	cr2 &= ~(UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_RIE);
+	writeb(cr2, sport->port.membase + UARTCR2);
+
+	uart_console_write(&sport->port, s, count, lpuart_console_putchar);
+
+	/* wait for transmitter finish complete and restore CR2 */
+	while (!(readb(sport->port.membase + UARTSR1) & UARTSR1_TC))
+		barrier();
+
+	writeb(old_cr2, sport->port.membase + UARTCR2);
+}
+
+/*
+ * if the port was already initialised (eg, by a boot loader),
+ * try to determine the current setup.
+ */
+static void __init
+lpuart_console_get_options(struct lpuart_port *sport, int *baud,
+			   int *parity, int *bits)
+{
+	unsigned char cr, bdh, bdl, brfa;
+	unsigned int sbr, uartclk, baud_raw;
+
+	cr = readb(sport->port.membase + UARTCR2);
+	cr &= UARTCR2_TE | UARTCR2_RE;
+	if (!cr)
+		return;
+
+	/* ok, the port was enabled */
+
+	cr = readb(sport->port.membase + UARTCR1);
+
+	*parity = 'n';
+	if (cr & UARTCR1_PE) {
+		if (cr & UARTCR1_PT)
+			*parity = 'o';
+		else
+			*parity = 'e';
+	}
+
+	if (cr & UARTCR1_M)
+		*bits = 9;
+	else
+		*bits = 8;
+
+	bdh = readb(sport->port.membase + UARTBDH);
+	bdh &= UARTBDH_SBR_MASK;
+	bdl = readb(sport->port.membase + UARTBDL);
+	sbr = bdh;
+	sbr <<= 8;
+	sbr |= bdl;
+	brfa = readb(sport->port.membase + UARTCR4);
+	brfa &= UARTCR4_BRFA_MASK;
+
+	uartclk = clk_get_rate(sport->clk);
+	/*
+	 * baud = mod_clk/(16*(sbr[13]+(brfa)/32)
+	 */
+	baud_raw = uartclk / (16 * (sbr + brfa / 32));
+
+	if (*baud != baud_raw)
+		printk(KERN_INFO "Serial: Console lpuart rounded baud rate"
+				"from %d to %d\n", baud_raw, *baud);
+}
+
+static int __init lpuart_console_setup(struct console *co, char *options)
+{
+	struct lpuart_port *sport;
+	int baud = 115200;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	/*
+	 * check whether an invalid uart number has been specified, and
+	 * if so, search for the first available port that does have
+	 * console support.
+	 */
+	if (co->index == -1 || co->index >= ARRAY_SIZE(lpuart_ports))
+		co->index = 0;
+
+	sport = lpuart_ports[co->index];
+	if (sport == NULL)
+		return -ENODEV;
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+	else
+		lpuart_console_get_options(sport, &baud, &parity, &bits);
+
+	lpuart_setup_watermark(sport);
+
+	return uart_set_options(&sport->port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver lpuart_reg;
+static struct console lpuart_console = {
+	.name		= DEV_NAME,
+	.write		= lpuart_console_write,
+	.device		= uart_console_device,
+	.setup		= lpuart_console_setup,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
+	.data		= &lpuart_reg,
+};
+
+#define LPUART_CONSOLE	(&lpuart_console)
+#else
+#define LPUART_CONSOLE	NULL
+#endif
+
+static struct uart_driver lpuart_reg = {
+	.owner		= THIS_MODULE,
+	.driver_name	= DRIVER_NAME,
+	.dev_name	= DEV_NAME,
+	.nr		= ARRAY_SIZE(lpuart_ports),
+	.cons		= LPUART_CONSOLE,
+};
+
+static int lpuart_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct lpuart_port *sport;
+	struct resource *res;
+	int ret;
+
+	sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL);
+	if (!sport)
+		return -ENOMEM;
+
+	pdev->dev.coherent_dma_mask = 0;
+
+	ret = of_alias_get_id(np, "serial");
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
+		return ret;
+	}
+	sport->port.line = ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	sport->port.mapbase = res->start;
+	sport->port.membase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(sport->port.membase))
+		return PTR_ERR(sport->port.membase);
+
+	sport->port.dev = &pdev->dev;
+	sport->port.type = PORT_LPUART;
+	sport->port.iotype = UPIO_MEM;
+	sport->port.irq = platform_get_irq(pdev, 0);
+	sport->port.ops = &lpuart_pops;
+	sport->port.flags = UPF_BOOT_AUTOCONF;
+
+	sport->clk = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(sport->clk)) {
+		ret = PTR_ERR(sport->clk);
+		dev_err(&pdev->dev, "failed to get uart clk: %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(sport->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable uart clk: %d\n", ret);
+		return ret;
+	}
+
+	sport->port.uartclk = clk_get_rate(sport->clk);
+
+	lpuart_ports[sport->port.line] = sport;
+
+	platform_set_drvdata(pdev, &sport->port);
+
+	ret = uart_add_one_port(&lpuart_reg, &sport->port);
+	if (ret) {
+		clk_disable_unprepare(sport->clk);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int lpuart_remove(struct platform_device *pdev)
+{
+	struct lpuart_port *sport = platform_get_drvdata(pdev);
+
+	uart_remove_one_port(&lpuart_reg, &sport->port);
+
+	clk_disable_unprepare(sport->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int lpuart_suspend(struct device *dev)
+{
+	struct lpuart_port *sport = dev_get_drvdata(dev);
+
+	uart_suspend_port(&lpuart_reg, &sport->port);
+
+	return 0;
+}
+
+static int lpuart_resume(struct device *dev)
+{
+	struct lpuart_port *sport = dev_get_drvdata(dev);
+
+	uart_resume_port(&lpuart_reg, &sport->port);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(lpuart_pm_ops, lpuart_suspend, lpuart_resume);
+
+static struct platform_driver lpuart_driver = {
+	.probe		= lpuart_probe,
+	.remove		= lpuart_remove,
+	.driver		= {
+		.name	= "fsl-lpuart",
+		.owner	= THIS_MODULE,
+		.of_match_table = lpuart_dt_ids,
+		.pm	= &lpuart_pm_ops,
+	},
+};
+
+static int __init lpuart_serial_init(void)
+{
+	int ret;
+
+	pr_info("serial: Freescale lpuart driver\n");
+
+	ret = uart_register_driver(&lpuart_reg);
+	if (ret)
+		return ret;
+
+	ret = platform_driver_register(&lpuart_driver);
+	if (ret)
+		uart_unregister_driver(&lpuart_reg);
+
+	return 0;
+}
+
+static void __exit lpuart_serial_exit(void)
+{
+	platform_driver_unregister(&lpuart_driver);
+	uart_unregister_driver(&lpuart_reg);
+}
+
+module_init(lpuart_serial_init);
+module_exit(lpuart_serial_exit);
+
+MODULE_DESCRIPTION("Freescale lpuart serial port driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 8cdfbd365892..415cec62073f 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -201,6 +201,7 @@ struct imx_port {
 	unsigned int		old_status;
 	int			txirq, rxirq, rtsirq;
 	unsigned int		have_rtscts:1;
+	unsigned int		dte_mode:1;
 	unsigned int		use_irda:1;
 	unsigned int		irda_inv_rx:1;
 	unsigned int		irda_inv_tx:1;
@@ -271,6 +272,7 @@ static inline int is_imx21_uart(struct imx_port *sport)
 /*
  * Save and restore functions for UCR1, UCR2 and UCR3 registers
  */
+#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_IMX_CONSOLE)
 static void imx_port_ucrs_save(struct uart_port *port,
 			       struct imx_port_ucrs *ucr)
 {
@@ -288,6 +290,7 @@ static void imx_port_ucrs_restore(struct uart_port *port,
 	writel(ucr->ucr2, port->membase + UCR2);
 	writel(ucr->ucr3, port->membase + UCR3);
 }
+#endif
 
 /*
  * Handle any change of modem status signal since we were last called.
@@ -449,6 +452,13 @@ static void imx_start_tx(struct uart_port *port)
 		temp &= ~(UCR1_RRDYEN);
 		writel(temp, sport->port.membase + UCR1);
 	}
+	/* Clear any pending ORE flag before enabling interrupt */
+	temp = readl(sport->port.membase + USR2);
+	writel(temp | USR2_ORE, sport->port.membase + USR2);
+
+	temp = readl(sport->port.membase + UCR4);
+	temp |= UCR4_OREN;
+	writel(temp, sport->port.membase + UCR4);
 
 	temp = readl(sport->port.membase + UCR1);
 	writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1);
@@ -582,6 +592,7 @@ static irqreturn_t imx_int(int irq, void *dev_id)
 {
 	struct imx_port *sport = dev_id;
 	unsigned int sts;
+	unsigned int sts2;
 
 	sts = readl(sport->port.membase + USR1);
 
@@ -598,6 +609,13 @@ static irqreturn_t imx_int(int irq, void *dev_id)
 	if (sts & USR1_AWAKE)
 		writel(USR1_AWAKE, sport->port.membase + USR1);
 
+	sts2 = readl(sport->port.membase + USR2);
+	if (sts2 & USR2_ORE) {
+		dev_err(sport->port.dev, "Rx FIFO overrun\n");
+		sport->port.icount.overrun++;
+		writel(sts2 | USR2_ORE, sport->port.membase + USR2);
+	}
+
 	return IRQ_HANDLED;
 }
 
@@ -684,6 +702,17 @@ static int imx_startup(struct uart_port *port)
 	int retval;
 	unsigned long flags, temp;
 
+	if (!uart_console(port)) {
+		retval = clk_prepare_enable(sport->clk_per);
+		if (retval)
+			goto error_out1;
+		retval = clk_prepare_enable(sport->clk_ipg);
+		if (retval) {
+			clk_disable_unprepare(sport->clk_per);
+			goto error_out1;
+		}
+	}
+
 	imx_setup_ufcr(sport, 0);
 
 	/* disable the DREN bit (Data Ready interrupt enable) before
@@ -871,6 +900,11 @@ static void imx_shutdown(struct uart_port *port)
 
 	writel(temp, sport->port.membase + UCR1);
 	spin_unlock_irqrestore(&sport->port.lock, flags);
+
+	if (!uart_console(&sport->port)) {
+		clk_disable_unprepare(sport->clk_per);
+		clk_disable_unprepare(sport->clk_ipg);
+	}
 }
 
 static void
@@ -1007,6 +1041,8 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	ufcr = readl(sport->port.membase + UFCR);
 	ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div);
+	if (sport->dte_mode)
+		ufcr |= UFCR_DCEDTE;
 	writel(ufcr, sport->port.membase + UFCR);
 
 	writel(num, sport->port.membase + UBIR);
@@ -1431,6 +1467,9 @@ static int serial_imx_probe_dt(struct imx_port *sport,
 	if (of_get_property(np, "fsl,irda-mode", NULL))
 		sport->use_irda = 1;
 
+	if (of_get_property(np, "fsl,dte-mode", NULL))
+		sport->dte_mode = 1;
+
 	sport->devdata = of_id->data;
 
 	return 0;
@@ -1544,6 +1583,11 @@ static int serial_imx_probe(struct platform_device *pdev)
 		goto deinit;
 	platform_set_drvdata(pdev, sport);
 
+	if (!uart_console(&sport->port)) {
+		clk_disable_unprepare(sport->clk_per);
+		clk_disable_unprepare(sport->clk_ipg);
+	}
+
 	return 0;
 deinit:
 	if (pdata && pdata->exit)
@@ -1565,9 +1609,6 @@ static int serial_imx_remove(struct platform_device *pdev)
 
 	uart_remove_one_port(&imx_reg, &sport->port);
 
-	clk_disable_unprepare(sport->clk_per);
-	clk_disable_unprepare(sport->clk_ipg);
-
 	if (pdata && pdata->exit)
 		pdata->exit(pdev);
 
diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c
index 5f4765a7a5c5..e266eca0ec76 100644
--- a/drivers/tty/serial/mfd.c
+++ b/drivers/tty/serial/mfd.c
@@ -21,6 +21,10 @@
  *    be triggered
  */
 
+#if defined(CONFIG_SERIAL_MFD_HSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/console.h>
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index f51b280f3bf2..e1280a20b7a2 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -84,16 +84,6 @@ static void mpc52xx_uart_of_enumerate(void);
 static irqreturn_t mpc52xx_uart_int(int irq, void *dev_id);
 static irqreturn_t mpc5xxx_uart_process_int(struct uart_port *port);
 
-
-/* Simple macro to test if a port is console or not. This one is taken
- * for serial_core.c and maybe should be moved to serial_core.h ? */
-#ifdef CONFIG_SERIAL_CORE_CONSOLE
-#define uart_console(port) \
-	((port)->cons && (port)->cons->index == (port)->line)
-#else
-#define uart_console(port)	(0)
-#endif
-
 /* ======================================================================== */
 /* PSC fifo operations for isolating differences between 52xx and 512x      */
 /* ======================================================================== */
@@ -122,6 +112,15 @@ struct psc_ops {
 	void		(*fifoc_uninit)(void);
 	void		(*get_irq)(struct uart_port *, struct device_node *);
 	irqreturn_t	(*handle_irq)(struct uart_port *port);
+	u16		(*get_status)(struct uart_port *port);
+	u8		(*get_ipcr)(struct uart_port *port);
+	void		(*command)(struct uart_port *port, u8 cmd);
+	void		(*set_mode)(struct uart_port *port, u8 mr1, u8 mr2);
+	void		(*set_rts)(struct uart_port *port, int state);
+	void		(*enable_ms)(struct uart_port *port);
+	void		(*set_sicr)(struct uart_port *port, u32 val);
+	void		(*set_imr)(struct uart_port *port, u16 val);
+	u8		(*get_mr1)(struct uart_port *port);
 };
 
 /* setting the prescaler and divisor reg is common for all chips */
@@ -134,6 +133,65 @@ static inline void mpc52xx_set_divisor(struct mpc52xx_psc __iomem *psc,
 	out_8(&psc->ctlr, divisor & 0xff);
 }
 
+static u16 mpc52xx_psc_get_status(struct uart_port *port)
+{
+	return in_be16(&PSC(port)->mpc52xx_psc_status);
+}
+
+static u8 mpc52xx_psc_get_ipcr(struct uart_port *port)
+{
+	return in_8(&PSC(port)->mpc52xx_psc_ipcr);
+}
+
+static void mpc52xx_psc_command(struct uart_port *port, u8 cmd)
+{
+	out_8(&PSC(port)->command, cmd);
+}
+
+static void mpc52xx_psc_set_mode(struct uart_port *port, u8 mr1, u8 mr2)
+{
+	out_8(&PSC(port)->command, MPC52xx_PSC_SEL_MODE_REG_1);
+	out_8(&PSC(port)->mode, mr1);
+	out_8(&PSC(port)->mode, mr2);
+}
+
+static void mpc52xx_psc_set_rts(struct uart_port *port, int state)
+{
+	if (state)
+		out_8(&PSC(port)->op1, MPC52xx_PSC_OP_RTS);
+	else
+		out_8(&PSC(port)->op0, MPC52xx_PSC_OP_RTS);
+}
+
+static void mpc52xx_psc_enable_ms(struct uart_port *port)
+{
+	struct mpc52xx_psc __iomem *psc = PSC(port);
+
+	/* clear D_*-bits by reading them */
+	in_8(&psc->mpc52xx_psc_ipcr);
+	/* enable CTS and DCD as IPC interrupts */
+	out_8(&psc->mpc52xx_psc_acr, MPC52xx_PSC_IEC_CTS | MPC52xx_PSC_IEC_DCD);
+
+	port->read_status_mask |= MPC52xx_PSC_IMR_IPC;
+	out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
+}
+
+static void mpc52xx_psc_set_sicr(struct uart_port *port, u32 val)
+{
+	out_be32(&PSC(port)->sicr, val);
+}
+
+static void mpc52xx_psc_set_imr(struct uart_port *port, u16 val)
+{
+	out_be16(&PSC(port)->mpc52xx_psc_imr, val);
+}
+
+static u8 mpc52xx_psc_get_mr1(struct uart_port *port)
+{
+	out_8(&PSC(port)->command, MPC52xx_PSC_SEL_MODE_REG_1);
+	return in_8(&PSC(port)->mode);
+}
+
 #ifdef CONFIG_PPC_MPC52xx
 #define FIFO_52xx(port) ((struct mpc52xx_psc_fifo __iomem *)(PSC(port)+1))
 static void mpc52xx_psc_fifo_init(struct uart_port *port)
@@ -304,6 +362,15 @@ static struct psc_ops mpc52xx_psc_ops = {
 	.set_baudrate = mpc5200_psc_set_baudrate,
 	.get_irq = mpc52xx_psc_get_irq,
 	.handle_irq = mpc52xx_psc_handle_irq,
+	.get_status = mpc52xx_psc_get_status,
+	.get_ipcr = mpc52xx_psc_get_ipcr,
+	.command = mpc52xx_psc_command,
+	.set_mode = mpc52xx_psc_set_mode,
+	.set_rts = mpc52xx_psc_set_rts,
+	.enable_ms = mpc52xx_psc_enable_ms,
+	.set_sicr = mpc52xx_psc_set_sicr,
+	.set_imr = mpc52xx_psc_set_imr,
+	.get_mr1 = mpc52xx_psc_get_mr1,
 };
 
 static struct psc_ops mpc5200b_psc_ops = {
@@ -325,6 +392,15 @@ static struct psc_ops mpc5200b_psc_ops = {
 	.set_baudrate = mpc5200b_psc_set_baudrate,
 	.get_irq = mpc52xx_psc_get_irq,
 	.handle_irq = mpc52xx_psc_handle_irq,
+	.get_status = mpc52xx_psc_get_status,
+	.get_ipcr = mpc52xx_psc_get_ipcr,
+	.command = mpc52xx_psc_command,
+	.set_mode = mpc52xx_psc_set_mode,
+	.set_rts = mpc52xx_psc_set_rts,
+	.enable_ms = mpc52xx_psc_enable_ms,
+	.set_sicr = mpc52xx_psc_set_sicr,
+	.set_imr = mpc52xx_psc_set_imr,
+	.get_mr1 = mpc52xx_psc_get_mr1,
 };
 
 #endif /* CONFIG_MPC52xx */
@@ -572,6 +648,246 @@ static void mpc512x_psc_get_irq(struct uart_port *port, struct device_node *np)
 	port->irqflags = IRQF_SHARED;
 	port->irq = psc_fifoc_irq;
 }
+#endif
+
+#ifdef CONFIG_PPC_MPC512x
+
+#define PSC_5125(port) ((struct mpc5125_psc __iomem *)((port)->membase))
+#define FIFO_5125(port) ((struct mpc512x_psc_fifo __iomem *)(PSC_5125(port)+1))
+
+static void mpc5125_psc_fifo_init(struct uart_port *port)
+{
+	/* /32 prescaler */
+	out_8(&PSC_5125(port)->mpc52xx_psc_clock_select, 0xdd);
+
+	out_be32(&FIFO_5125(port)->txcmd, MPC512x_PSC_FIFO_RESET_SLICE);
+	out_be32(&FIFO_5125(port)->txcmd, MPC512x_PSC_FIFO_ENABLE_SLICE);
+	out_be32(&FIFO_5125(port)->txalarm, 1);
+	out_be32(&FIFO_5125(port)->tximr, 0);
+
+	out_be32(&FIFO_5125(port)->rxcmd, MPC512x_PSC_FIFO_RESET_SLICE);
+	out_be32(&FIFO_5125(port)->rxcmd, MPC512x_PSC_FIFO_ENABLE_SLICE);
+	out_be32(&FIFO_5125(port)->rxalarm, 1);
+	out_be32(&FIFO_5125(port)->rximr, 0);
+
+	out_be32(&FIFO_5125(port)->tximr, MPC512x_PSC_FIFO_ALARM);
+	out_be32(&FIFO_5125(port)->rximr, MPC512x_PSC_FIFO_ALARM);
+}
+
+static int mpc5125_psc_raw_rx_rdy(struct uart_port *port)
+{
+	return !(in_be32(&FIFO_5125(port)->rxsr) & MPC512x_PSC_FIFO_EMPTY);
+}
+
+static int mpc5125_psc_raw_tx_rdy(struct uart_port *port)
+{
+	return !(in_be32(&FIFO_5125(port)->txsr) & MPC512x_PSC_FIFO_FULL);
+}
+
+static int mpc5125_psc_rx_rdy(struct uart_port *port)
+{
+	return in_be32(&FIFO_5125(port)->rxsr) &
+	       in_be32(&FIFO_5125(port)->rximr) & MPC512x_PSC_FIFO_ALARM;
+}
+
+static int mpc5125_psc_tx_rdy(struct uart_port *port)
+{
+	return in_be32(&FIFO_5125(port)->txsr) &
+	       in_be32(&FIFO_5125(port)->tximr) & MPC512x_PSC_FIFO_ALARM;
+}
+
+static int mpc5125_psc_tx_empty(struct uart_port *port)
+{
+	return in_be32(&FIFO_5125(port)->txsr) & MPC512x_PSC_FIFO_EMPTY;
+}
+
+static void mpc5125_psc_stop_rx(struct uart_port *port)
+{
+	unsigned long rx_fifo_imr;
+
+	rx_fifo_imr = in_be32(&FIFO_5125(port)->rximr);
+	rx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM;
+	out_be32(&FIFO_5125(port)->rximr, rx_fifo_imr);
+}
+
+static void mpc5125_psc_start_tx(struct uart_port *port)
+{
+	unsigned long tx_fifo_imr;
+
+	tx_fifo_imr = in_be32(&FIFO_5125(port)->tximr);
+	tx_fifo_imr |= MPC512x_PSC_FIFO_ALARM;
+	out_be32(&FIFO_5125(port)->tximr, tx_fifo_imr);
+}
+
+static void mpc5125_psc_stop_tx(struct uart_port *port)
+{
+	unsigned long tx_fifo_imr;
+
+	tx_fifo_imr = in_be32(&FIFO_5125(port)->tximr);
+	tx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM;
+	out_be32(&FIFO_5125(port)->tximr, tx_fifo_imr);
+}
+
+static void mpc5125_psc_rx_clr_irq(struct uart_port *port)
+{
+	out_be32(&FIFO_5125(port)->rxisr, in_be32(&FIFO_5125(port)->rxisr));
+}
+
+static void mpc5125_psc_tx_clr_irq(struct uart_port *port)
+{
+	out_be32(&FIFO_5125(port)->txisr, in_be32(&FIFO_5125(port)->txisr));
+}
+
+static void mpc5125_psc_write_char(struct uart_port *port, unsigned char c)
+{
+	out_8(&FIFO_5125(port)->txdata_8, c);
+}
+
+static unsigned char mpc5125_psc_read_char(struct uart_port *port)
+{
+	return in_8(&FIFO_5125(port)->rxdata_8);
+}
+
+static void mpc5125_psc_cw_disable_ints(struct uart_port *port)
+{
+	port->read_status_mask =
+		in_be32(&FIFO_5125(port)->tximr) << 16 |
+		in_be32(&FIFO_5125(port)->rximr);
+	out_be32(&FIFO_5125(port)->tximr, 0);
+	out_be32(&FIFO_5125(port)->rximr, 0);
+}
+
+static void mpc5125_psc_cw_restore_ints(struct uart_port *port)
+{
+	out_be32(&FIFO_5125(port)->tximr,
+		(port->read_status_mask >> 16) & 0x7f);
+	out_be32(&FIFO_5125(port)->rximr, port->read_status_mask & 0x7f);
+}
+
+static inline void mpc5125_set_divisor(struct mpc5125_psc __iomem *psc,
+		u8 prescaler, unsigned int divisor)
+{
+	/* select prescaler */
+	out_8(&psc->mpc52xx_psc_clock_select, prescaler);
+	out_8(&psc->ctur, divisor >> 8);
+	out_8(&psc->ctlr, divisor & 0xff);
+}
+
+static unsigned int mpc5125_psc_set_baudrate(struct uart_port *port,
+					     struct ktermios *new,
+					     struct ktermios *old)
+{
+	unsigned int baud;
+	unsigned int divisor;
+
+	/*
+	 * Calculate with a /16 prescaler here.
+	 */
+
+	/* uartclk contains the ips freq */
+	baud = uart_get_baud_rate(port, new, old,
+				  port->uartclk / (16 * 0xffff) + 1,
+				  port->uartclk / 16);
+	divisor = (port->uartclk + 8 * baud) / (16 * baud);
+
+	/* enable the /16 prescaler and set the divisor */
+	mpc5125_set_divisor(PSC_5125(port), 0xdd, divisor);
+	return baud;
+}
+
+/*
+ * MPC5125 have compatible PSC FIFO Controller.
+ * Special init not needed.
+ */
+static u16 mpc5125_psc_get_status(struct uart_port *port)
+{
+	return in_be16(&PSC_5125(port)->mpc52xx_psc_status);
+}
+
+static u8 mpc5125_psc_get_ipcr(struct uart_port *port)
+{
+	return in_8(&PSC_5125(port)->mpc52xx_psc_ipcr);
+}
+
+static void mpc5125_psc_command(struct uart_port *port, u8 cmd)
+{
+	out_8(&PSC_5125(port)->command, cmd);
+}
+
+static void mpc5125_psc_set_mode(struct uart_port *port, u8 mr1, u8 mr2)
+{
+	out_8(&PSC_5125(port)->mr1, mr1);
+	out_8(&PSC_5125(port)->mr2, mr2);
+}
+
+static void mpc5125_psc_set_rts(struct uart_port *port, int state)
+{
+	if (state & TIOCM_RTS)
+		out_8(&PSC_5125(port)->op1, MPC52xx_PSC_OP_RTS);
+	else
+		out_8(&PSC_5125(port)->op0, MPC52xx_PSC_OP_RTS);
+}
+
+static void mpc5125_psc_enable_ms(struct uart_port *port)
+{
+	struct mpc5125_psc __iomem *psc = PSC_5125(port);
+
+	/* clear D_*-bits by reading them */
+	in_8(&psc->mpc52xx_psc_ipcr);
+	/* enable CTS and DCD as IPC interrupts */
+	out_8(&psc->mpc52xx_psc_acr, MPC52xx_PSC_IEC_CTS | MPC52xx_PSC_IEC_DCD);
+
+	port->read_status_mask |= MPC52xx_PSC_IMR_IPC;
+	out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
+}
+
+static void mpc5125_psc_set_sicr(struct uart_port *port, u32 val)
+{
+	out_be32(&PSC_5125(port)->sicr, val);
+}
+
+static void mpc5125_psc_set_imr(struct uart_port *port, u16 val)
+{
+	out_be16(&PSC_5125(port)->mpc52xx_psc_imr, val);
+}
+
+static u8 mpc5125_psc_get_mr1(struct uart_port *port)
+{
+	return in_8(&PSC_5125(port)->mr1);
+}
+
+static struct psc_ops mpc5125_psc_ops = {
+	.fifo_init = mpc5125_psc_fifo_init,
+	.raw_rx_rdy = mpc5125_psc_raw_rx_rdy,
+	.raw_tx_rdy = mpc5125_psc_raw_tx_rdy,
+	.rx_rdy = mpc5125_psc_rx_rdy,
+	.tx_rdy = mpc5125_psc_tx_rdy,
+	.tx_empty = mpc5125_psc_tx_empty,
+	.stop_rx = mpc5125_psc_stop_rx,
+	.start_tx = mpc5125_psc_start_tx,
+	.stop_tx = mpc5125_psc_stop_tx,
+	.rx_clr_irq = mpc5125_psc_rx_clr_irq,
+	.tx_clr_irq = mpc5125_psc_tx_clr_irq,
+	.write_char = mpc5125_psc_write_char,
+	.read_char = mpc5125_psc_read_char,
+	.cw_disable_ints = mpc5125_psc_cw_disable_ints,
+	.cw_restore_ints = mpc5125_psc_cw_restore_ints,
+	.set_baudrate = mpc5125_psc_set_baudrate,
+	.clock = mpc512x_psc_clock,
+	.fifoc_init = mpc512x_psc_fifoc_init,
+	.fifoc_uninit = mpc512x_psc_fifoc_uninit,
+	.get_irq = mpc512x_psc_get_irq,
+	.handle_irq = mpc512x_psc_handle_irq,
+	.get_status = mpc5125_psc_get_status,
+	.get_ipcr = mpc5125_psc_get_ipcr,
+	.command = mpc5125_psc_command,
+	.set_mode = mpc5125_psc_set_mode,
+	.set_rts = mpc5125_psc_set_rts,
+	.enable_ms = mpc5125_psc_enable_ms,
+	.set_sicr = mpc5125_psc_set_sicr,
+	.set_imr = mpc5125_psc_set_imr,
+	.get_mr1 = mpc5125_psc_get_mr1,
+};
 
 static struct psc_ops mpc512x_psc_ops = {
 	.fifo_init = mpc512x_psc_fifo_init,
@@ -595,8 +911,18 @@ static struct psc_ops mpc512x_psc_ops = {
 	.fifoc_uninit = mpc512x_psc_fifoc_uninit,
 	.get_irq = mpc512x_psc_get_irq,
 	.handle_irq = mpc512x_psc_handle_irq,
+	.get_status = mpc52xx_psc_get_status,
+	.get_ipcr = mpc52xx_psc_get_ipcr,
+	.command = mpc52xx_psc_command,
+	.set_mode = mpc52xx_psc_set_mode,
+	.set_rts = mpc52xx_psc_set_rts,
+	.enable_ms = mpc52xx_psc_enable_ms,
+	.set_sicr = mpc52xx_psc_set_sicr,
+	.set_imr = mpc52xx_psc_set_imr,
+	.get_mr1 = mpc52xx_psc_get_mr1,
 };
-#endif
+#endif /* CONFIG_PPC_MPC512x */
+
 
 static const struct psc_ops *psc_ops;
 
@@ -613,17 +939,14 @@ mpc52xx_uart_tx_empty(struct uart_port *port)
 static void
 mpc52xx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
-	if (mctrl & TIOCM_RTS)
-		out_8(&PSC(port)->op1, MPC52xx_PSC_OP_RTS);
-	else
-		out_8(&PSC(port)->op0, MPC52xx_PSC_OP_RTS);
+	psc_ops->set_rts(port, mctrl & TIOCM_RTS);
 }
 
 static unsigned int
 mpc52xx_uart_get_mctrl(struct uart_port *port)
 {
 	unsigned int ret = TIOCM_DSR;
-	u8 status = in_8(&PSC(port)->mpc52xx_psc_ipcr);
+	u8 status = psc_ops->get_ipcr(port);
 
 	if (!(status & MPC52xx_PSC_CTS))
 		ret |= TIOCM_CTS;
@@ -673,15 +996,7 @@ mpc52xx_uart_stop_rx(struct uart_port *port)
 static void
 mpc52xx_uart_enable_ms(struct uart_port *port)
 {
-	struct mpc52xx_psc __iomem *psc = PSC(port);
-
-	/* clear D_*-bits by reading them */
-	in_8(&psc->mpc52xx_psc_ipcr);
-	/* enable CTS and DCD as IPC interrupts */
-	out_8(&psc->mpc52xx_psc_acr, MPC52xx_PSC_IEC_CTS | MPC52xx_PSC_IEC_DCD);
-
-	port->read_status_mask |= MPC52xx_PSC_IMR_IPC;
-	out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
+	psc_ops->enable_ms(port);
 }
 
 static void
@@ -691,9 +1006,9 @@ mpc52xx_uart_break_ctl(struct uart_port *port, int ctl)
 	spin_lock_irqsave(&port->lock, flags);
 
 	if (ctl == -1)
-		out_8(&PSC(port)->command, MPC52xx_PSC_START_BRK);
+		psc_ops->command(port, MPC52xx_PSC_START_BRK);
 	else
-		out_8(&PSC(port)->command, MPC52xx_PSC_STOP_BRK);
+		psc_ops->command(port, MPC52xx_PSC_STOP_BRK);
 
 	spin_unlock_irqrestore(&port->lock, flags);
 }
@@ -701,7 +1016,6 @@ mpc52xx_uart_break_ctl(struct uart_port *port, int ctl)
 static int
 mpc52xx_uart_startup(struct uart_port *port)
 {
-	struct mpc52xx_psc __iomem *psc = PSC(port);
 	int ret;
 
 	if (psc_ops->clock) {
@@ -717,15 +1031,15 @@ mpc52xx_uart_startup(struct uart_port *port)
 		return ret;
 
 	/* Reset/activate the port, clear and enable interrupts */
-	out_8(&psc->command, MPC52xx_PSC_RST_RX);
-	out_8(&psc->command, MPC52xx_PSC_RST_TX);
+	psc_ops->command(port, MPC52xx_PSC_RST_RX);
+	psc_ops->command(port, MPC52xx_PSC_RST_TX);
 
-	out_be32(&psc->sicr, 0);	/* UART mode DCD ignored */
+	psc_ops->set_sicr(port, 0);	/* UART mode DCD ignored */
 
 	psc_ops->fifo_init(port);
 
-	out_8(&psc->command, MPC52xx_PSC_TX_ENABLE);
-	out_8(&psc->command, MPC52xx_PSC_RX_ENABLE);
+	psc_ops->command(port, MPC52xx_PSC_TX_ENABLE);
+	psc_ops->command(port, MPC52xx_PSC_RX_ENABLE);
 
 	return 0;
 }
@@ -733,19 +1047,20 @@ mpc52xx_uart_startup(struct uart_port *port)
 static void
 mpc52xx_uart_shutdown(struct uart_port *port)
 {
-	struct mpc52xx_psc __iomem *psc = PSC(port);
-
 	/* Shut down the port.  Leave TX active if on a console port */
-	out_8(&psc->command, MPC52xx_PSC_RST_RX);
+	psc_ops->command(port, MPC52xx_PSC_RST_RX);
 	if (!uart_console(port))
-		out_8(&psc->command, MPC52xx_PSC_RST_TX);
+		psc_ops->command(port, MPC52xx_PSC_RST_TX);
 
 	port->read_status_mask = 0;
-	out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
+	psc_ops->set_imr(port, port->read_status_mask);
 
 	if (psc_ops->clock)
 		psc_ops->clock(port, 0);
 
+	/* Disable interrupt */
+	psc_ops->cw_disable_ints(port);
+
 	/* Release interrupt */
 	free_irq(port->irq, port);
 }
@@ -754,7 +1069,6 @@ static void
 mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
 			 struct ktermios *old)
 {
-	struct mpc52xx_psc __iomem *psc = PSC(port);
 	unsigned long flags;
 	unsigned char mr1, mr2;
 	unsigned int j;
@@ -818,13 +1132,11 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
 			"Some chars may have been lost.\n");
 
 	/* Reset the TX & RX */
-	out_8(&psc->command, MPC52xx_PSC_RST_RX);
-	out_8(&psc->command, MPC52xx_PSC_RST_TX);
+	psc_ops->command(port, MPC52xx_PSC_RST_RX);
+	psc_ops->command(port, MPC52xx_PSC_RST_TX);
 
 	/* Send new mode settings */
-	out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
-	out_8(&psc->mode, mr1);
-	out_8(&psc->mode, mr2);
+	psc_ops->set_mode(port, mr1, mr2);
 	baud = psc_ops->set_baudrate(port, new, old);
 
 	/* Update the per-port timeout */
@@ -834,8 +1146,8 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
 		mpc52xx_uart_enable_ms(port);
 
 	/* Reenable TX & RX */
-	out_8(&psc->command, MPC52xx_PSC_TX_ENABLE);
-	out_8(&psc->command, MPC52xx_PSC_RX_ENABLE);
+	psc_ops->command(port, MPC52xx_PSC_TX_ENABLE);
+	psc_ops->command(port, MPC52xx_PSC_RX_ENABLE);
 
 	/* We're all set, release the lock */
 	spin_unlock_irqrestore(&port->lock, flags);
@@ -963,7 +1275,7 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
 		flag = TTY_NORMAL;
 		port->icount.rx++;
 
-		status = in_be16(&PSC(port)->mpc52xx_psc_status);
+		status = psc_ops->get_status(port);
 
 		if (status & (MPC52xx_PSC_SR_PE |
 			      MPC52xx_PSC_SR_FE |
@@ -983,7 +1295,7 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
 			}
 
 			/* Clear error condition */
-			out_8(&PSC(port)->command, MPC52xx_PSC_RST_ERR_STAT);
+			psc_ops->command(port, MPC52xx_PSC_RST_ERR_STAT);
 
 		}
 		tty_insert_flip_char(tport, ch, flag);
@@ -1066,7 +1378,7 @@ mpc5xxx_uart_process_int(struct uart_port *port)
 		if (psc_ops->tx_rdy(port))
 			keepgoing |= mpc52xx_uart_int_tx_chars(port);
 
-		status = in_8(&PSC(port)->mpc52xx_psc_ipcr);
+		status = psc_ops->get_ipcr(port);
 		if (status & MPC52xx_PSC_D_DCD)
 			uart_handle_dcd_change(port, !(status & MPC52xx_PSC_DCD));
 
@@ -1107,14 +1419,12 @@ static void __init
 mpc52xx_console_get_options(struct uart_port *port,
 			    int *baud, int *parity, int *bits, int *flow)
 {
-	struct mpc52xx_psc __iomem *psc = PSC(port);
 	unsigned char mr1;
 
 	pr_debug("mpc52xx_console_get_options(port=%p)\n", port);
 
 	/* Read the mode registers */
-	out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
-	mr1 = in_8(&psc->mode);
+	mr1 = psc_ops->get_mr1(port);
 
 	/* CT{U,L}R are write-only ! */
 	*baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
@@ -1304,6 +1614,7 @@ static struct of_device_id mpc52xx_uart_of_match[] = {
 #endif
 #ifdef CONFIG_PPC_MPC512x
 	{ .compatible = "fsl,mpc5121-psc-uart", .data = &mpc512x_psc_ops, },
+	{ .compatible = "fsl,mpc5125-psc-uart", .data = &mpc5125_psc_ops, },
 #endif
 	{},
 };
@@ -1372,15 +1683,14 @@ static int mpc52xx_uart_of_probe(struct platform_device *op)
 	if (ret)
 		return ret;
 
-	dev_set_drvdata(&op->dev, (void *)port);
+	platform_set_drvdata(op, (void *)port);
 	return 0;
 }
 
 static int
 mpc52xx_uart_of_remove(struct platform_device *op)
 {
-	struct uart_port *port = dev_get_drvdata(&op->dev);
-	dev_set_drvdata(&op->dev, NULL);
+	struct uart_port *port = platform_get_drvdata(op);
 
 	if (port)
 		uart_remove_one_port(&mpc52xx_uart_driver, port);
@@ -1392,7 +1702,7 @@ mpc52xx_uart_of_remove(struct platform_device *op)
 static int
 mpc52xx_uart_of_suspend(struct platform_device *op, pm_message_t state)
 {
-	struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev);
+	struct uart_port *port = (struct uart_port *) platform_get_drvdata(op);
 
 	if (port)
 		uart_suspend_port(&mpc52xx_uart_driver, port);
@@ -1403,7 +1713,7 @@ mpc52xx_uart_of_suspend(struct platform_device *op, pm_message_t state)
 static int
 mpc52xx_uart_of_resume(struct platform_device *op)
 {
-	struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev);
+	struct uart_port *port = (struct uart_port *) platform_get_drvdata(op);
 
 	if (port)
 		uart_resume_port(&mpc52xx_uart_driver, port);
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index 39c7ea4cb14f..2caf9c6f6149 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -204,7 +204,7 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
 
 	info->type = port_type;
 	info->line = ret;
-	dev_set_drvdata(&ofdev->dev, info);
+	platform_set_drvdata(ofdev, info);
 	return 0;
 out:
 	kfree(info);
@@ -217,7 +217,7 @@ out:
  */
 static int of_platform_serial_remove(struct platform_device *ofdev)
 {
-	struct of_serial_info *info = dev_get_drvdata(&ofdev->dev);
+	struct of_serial_info *info = platform_get_drvdata(ofdev);
 	switch (info->type) {
 #ifdef CONFIG_SERIAL_8250
 	case PORT_8250 ... PORT_MAX_8250:
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index f0b9f6b52b32..b6d172873076 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -161,6 +161,7 @@ struct uart_omap_port {
 	u32			calc_latency;
 	struct work_struct	qos_work;
 	struct pinctrl		*pins;
+	bool			is_suspending;
 };
 
 #define to_uart_omap_port(p)	((container_of((p), struct uart_omap_port, port)))
@@ -197,7 +198,7 @@ static int serial_omap_get_context_loss_count(struct uart_omap_port *up)
 	struct omap_uart_port_info *pdata = up->dev->platform_data;
 
 	if (!pdata || !pdata->get_context_loss_count)
-		return 0;
+		return -EINVAL;
 
 	return pdata->get_context_loss_count(up->dev);
 }
@@ -1289,6 +1290,22 @@ static struct uart_driver serial_omap_reg = {
 };
 
 #ifdef CONFIG_PM_SLEEP
+static int serial_omap_prepare(struct device *dev)
+{
+	struct uart_omap_port *up = dev_get_drvdata(dev);
+
+	up->is_suspending = true;
+
+	return 0;
+}
+
+static void serial_omap_complete(struct device *dev)
+{
+	struct uart_omap_port *up = dev_get_drvdata(dev);
+
+	up->is_suspending = false;
+}
+
 static int serial_omap_suspend(struct device *dev)
 {
 	struct uart_omap_port *up = dev_get_drvdata(dev);
@@ -1307,7 +1324,10 @@ static int serial_omap_resume(struct device *dev)
 
 	return 0;
 }
-#endif
+#else
+#define serial_omap_prepare NULL
+#define serial_omap_complete NULL
+#endif /* CONFIG_PM_SLEEP */
 
 static void omap_serial_fill_features_erratas(struct uart_omap_port *up)
 {
@@ -1482,6 +1502,9 @@ static int serial_omap_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, up);
 	pm_runtime_enable(&pdev->dev);
+	if (omap_up_info->autosuspend_timeout == 0)
+		omap_up_info->autosuspend_timeout = -1;
+	device_init_wakeup(up->dev, true);
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_autosuspend_delay(&pdev->dev,
 			omap_up_info->autosuspend_timeout);
@@ -1591,13 +1614,19 @@ static void serial_omap_restore_context(struct uart_omap_port *up)
 static int serial_omap_runtime_suspend(struct device *dev)
 {
 	struct uart_omap_port *up = dev_get_drvdata(dev);
-	struct omap_uart_port_info *pdata = dev->platform_data;
 
 	if (!up)
 		return -EINVAL;
 
-	if (!pdata)
-		return 0;
+	/*
+	* When using 'no_console_suspend', the console UART must not be
+	* suspended. Since driver suspend is managed by runtime suspend,
+	* preventing runtime suspend (by returning error) will keep device
+	* active during suspend.
+	*/
+	if (up->is_suspending && !console_suspend_enabled &&
+	    uart_console(&up->port))
+		return -EBUSY;
 
 	up->context_loss_cnt = serial_omap_get_context_loss_count(up);
 
@@ -1626,7 +1655,7 @@ static int serial_omap_runtime_resume(struct device *dev)
 	int loss_cnt = serial_omap_get_context_loss_count(up);
 
 	if (loss_cnt < 0) {
-		dev_err(dev, "serial_omap_get_context_loss_count failed : %d\n",
+		dev_dbg(dev, "serial_omap_get_context_loss_count failed : %d\n",
 			loss_cnt);
 		serial_omap_restore_context(up);
 	} else if (up->context_loss_cnt != loss_cnt) {
@@ -1643,6 +1672,8 @@ static const struct dev_pm_ops serial_omap_dev_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(serial_omap_suspend, serial_omap_resume)
 	SET_RUNTIME_PM_OPS(serial_omap_runtime_suspend,
 				serial_omap_runtime_resume, NULL)
+	.prepare        = serial_omap_prepare,
+	.complete       = serial_omap_complete,
 };
 
 #if defined(CONFIG_OF)
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 21a7e179edf3..572d48189de9 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -217,6 +217,7 @@ enum {
 #define FRI2_64_UARTCLK  64000000 /*  64.0000 MHz */
 #define FRI2_48_UARTCLK  48000000 /*  48.0000 MHz */
 #define NTC1_UARTCLK     64000000 /*  64.0000 MHz */
+#define MINNOW_UARTCLK   50000000 /*  50.0000 MHz */
 
 struct pch_uart_buffer {
 	unsigned char *buf;
@@ -398,6 +399,10 @@ static int pch_uart_get_uartclk(void)
 		    strstr(cmp, "nanoETXexpress-TT")))
 		return NTC1_UARTCLK;
 
+	cmp = dmi_get_system_info(DMI_BOARD_NAME);
+	if (cmp && strstr(cmp, "MinnowBoard"))
+		return MINNOW_UARTCLK;
+
 	return DEFAULT_UARTCLK;
 }
 
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 0c8a9fa2be6c..81ebc86a9e23 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1811,7 +1811,13 @@ static int __init s3c24xx_serial_modinit(void)
 		return ret;
 	}
 
-	return platform_driver_register(&samsung_serial_driver);
+	ret = platform_driver_register(&samsung_serial_driver);
+	if (ret < 0) {
+		pr_err("Failed to register platform driver\n");
+		uart_unregister_driver(&s3c24xx_uart_drv);
+	}
+
+	return ret;
 }
 
 static void __exit s3c24xx_serial_modexit(void)
diff --git a/drivers/tty/serial/sc26xx.c b/drivers/tty/serial/sc26xx.c
index c9735680762d..4b1434d53e9d 100644
--- a/drivers/tty/serial/sc26xx.c
+++ b/drivers/tty/serial/sc26xx.c
@@ -696,7 +696,7 @@ static int sc26xx_probe(struct platform_device *dev)
 	if (err)
 		goto out_remove_ports;
 
-	dev_set_drvdata(&dev->dev, up);
+	platform_set_drvdata(dev, up);
 	return 0;
 
 out_remove_ports:
@@ -716,7 +716,7 @@ out_free_port:
 
 static int __exit sc26xx_driver_remove(struct platform_device *dev)
 {
-	struct uart_sc26xx_port *up = dev_get_drvdata(&dev->dev);
+	struct uart_sc26xx_port *up = platform_get_drvdata(dev);
 
 	free_irq(up->port[0].irq, up);
 
@@ -728,7 +728,6 @@ static int __exit sc26xx_driver_remove(struct platform_device *dev)
 	kfree(up);
 	sc26xx_port = NULL;
 
-	dev_set_drvdata(&dev->dev, NULL);
 	return 0;
 }
 
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index f87dbfd32770..28cdd2829139 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -50,12 +50,6 @@ static struct lock_class_key port_lock_key;
 
 #define HIGH_BITS_OFFSET	((sizeof(long)-sizeof(int))*8)
 
-#ifdef CONFIG_SERIAL_CORE_CONSOLE
-#define uart_console(port)	((port)->cons && (port)->cons->index == (port)->line)
-#else
-#define uart_console(port)	(0)
-#endif
-
 static void uart_change_speed(struct tty_struct *tty, struct uart_state *state,
 					struct ktermios *old_termios);
 static void uart_wait_until_sent(struct tty_struct *tty, int timeout);
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index 03465b673945..1fd564b8194b 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -687,9 +687,10 @@ int sirfsoc_uart_probe(struct platform_device *pdev)
 
 	if (sirfport->hw_flow_ctrl) {
 		sirfport->p = pinctrl_get_select_default(&pdev->dev);
-		ret = IS_ERR(sirfport->p);
-		if (ret)
+		if (IS_ERR(sirfport->p)) {
+			ret = PTR_ERR(sirfport->p);
 			goto err;
+		}
 	}
 
 	sirfport->clk = clk_get(&pdev->dev, NULL);
diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c
index ba60708053e0..cf86e729532b 100644
--- a/drivers/tty/serial/sunhv.c
+++ b/drivers/tty/serial/sunhv.c
@@ -577,7 +577,7 @@ static int hv_probe(struct platform_device *op)
 	if (err)
 		goto out_remove_port;
 
-	dev_set_drvdata(&op->dev, port);
+	platform_set_drvdata(op, port);
 
 	return 0;
 
@@ -601,7 +601,7 @@ out_free_port:
 
 static int hv_remove(struct platform_device *dev)
 {
-	struct uart_port *port = dev_get_drvdata(&dev->dev);
+	struct uart_port *port = platform_get_drvdata(dev);
 
 	free_irq(port->irq, port);
 
@@ -612,8 +612,6 @@ static int hv_remove(struct platform_device *dev)
 	kfree(port);
 	sunhv_port = NULL;
 
-	dev_set_drvdata(&dev->dev, NULL);
-
 	return 0;
 }
 
diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c
index a422c8b55a47..5d6136b2a04a 100644
--- a/drivers/tty/serial/sunsab.c
+++ b/drivers/tty/serial/sunsab.c
@@ -1037,7 +1037,7 @@ static int sab_probe(struct platform_device *op)
 	if (err)
 		goto out3;
 
-	dev_set_drvdata(&op->dev, &up[0]);
+	platform_set_drvdata(op, &up[0]);
 
 	inst++;
 
@@ -1059,7 +1059,7 @@ out:
 
 static int sab_remove(struct platform_device *op)
 {
-	struct uart_sunsab_port *up = dev_get_drvdata(&op->dev);
+	struct uart_sunsab_port *up = platform_get_drvdata(op);
 
 	uart_remove_one_port(&sunsab_reg, &up[1].port);
 	uart_remove_one_port(&sunsab_reg, &up[0].port);
@@ -1070,8 +1070,6 @@ static int sab_remove(struct platform_device *op)
 		   up[0].port.membase,
 		   sizeof(union sab82532_async_regs));
 
-	dev_set_drvdata(&op->dev, NULL);
-
 	return 0;
 }
 
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index 0d8465728473..699cc1b5f6aa 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -1454,7 +1454,7 @@ static int su_probe(struct platform_device *op)
 			kfree(up);
 			return err;
 		}
-		dev_set_drvdata(&op->dev, up);
+		platform_set_drvdata(op, up);
 
 		nr_inst++;
 
@@ -1483,7 +1483,7 @@ static int su_probe(struct platform_device *op)
 	if (err)
 		goto out_unmap;
 
-	dev_set_drvdata(&op->dev, up);
+	platform_set_drvdata(op, up);
 
 	nr_inst++;
 
@@ -1496,7 +1496,7 @@ out_unmap:
 
 static int su_remove(struct platform_device *op)
 {
-	struct uart_sunsu_port *up = dev_get_drvdata(&op->dev);
+	struct uart_sunsu_port *up = platform_get_drvdata(op);
 	bool kbdms = false;
 
 	if (up->su_type == SU_PORT_MS ||
@@ -1516,8 +1516,6 @@ static int su_remove(struct platform_device *op)
 	if (kbdms)
 		kfree(up);
 
-	dev_set_drvdata(&op->dev, NULL);
-
 	return 0;
 }
 
diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c
index 813ef8eb8eff..135a15203532 100644
--- a/drivers/tty/serial/sunzilog.c
+++ b/drivers/tty/serial/sunzilog.c
@@ -1495,7 +1495,7 @@ static int zs_probe(struct platform_device *op)
 		kbm_inst++;
 	}
 
-	dev_set_drvdata(&op->dev, &up[0]);
+	platform_set_drvdata(op, &up[0]);
 
 	return 0;
 }
@@ -1512,7 +1512,7 @@ static void zs_remove_one(struct uart_sunzilog_port *up)
 
 static int zs_remove(struct platform_device *op)
 {
-	struct uart_sunzilog_port *up = dev_get_drvdata(&op->dev);
+	struct uart_sunzilog_port *up = platform_get_drvdata(op);
 	struct zilog_layout __iomem *regs;
 
 	zs_remove_one(&up[0]);
@@ -1521,8 +1521,6 @@ static int zs_remove(struct platform_device *op)
 	regs = sunzilog_chip_regs[up[0].port.line / 2];
 	of_iounmap(&op->resource[0], regs, sizeof(struct zilog_layout));
 
-	dev_set_drvdata(&op->dev, NULL);
-
 	return 0;
 }
 
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 7355303dad99..88317482b81f 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -1451,7 +1451,7 @@ static int ucc_uart_probe(struct platform_device *ofdev)
 		goto out_np;
 	}
 
-	dev_set_drvdata(&ofdev->dev, qe_port);
+	platform_set_drvdata(ofdev, qe_port);
 
 	dev_info(&ofdev->dev, "UCC%u assigned to /dev/ttyQE%u\n",
 		qe_port->ucc_num + 1, qe_port->port.line);
@@ -1471,13 +1471,12 @@ out_free:
 
 static int ucc_uart_remove(struct platform_device *ofdev)
 {
-	struct uart_qe_port *qe_port = dev_get_drvdata(&ofdev->dev);
+	struct uart_qe_port *qe_port = platform_get_drvdata(ofdev);
 
 	dev_info(&ofdev->dev, "removing /dev/ttyQE%u\n", qe_port->port.line);
 
 	uart_remove_one_port(&ucc_uart_driver, &qe_port->port);
 
-	dev_set_drvdata(&ofdev->dev, NULL);
 	kfree(qe_port);
 
 	return 0;
@@ -1518,9 +1517,11 @@ static int __init ucc_uart_init(void)
 	}
 
 	ret = platform_driver_register(&ucc_uart_of_driver);
-	if (ret)
+	if (ret) {
 		printk(KERN_ERR
 		       "ucc-uart: could not register platform driver\n");
+		uart_unregister_driver(&ucc_uart_driver);
+	}
 
 	return ret;
 }
diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index 1a8bc2275ea4..48af43de3467 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -648,7 +648,7 @@ static struct platform_driver vt8500_platform_driver = {
 	.driver = {
 		.name = "vt8500_serial",
 		.owner = THIS_MODULE,
-		.of_match_table = of_match_ptr(wmt_dt_ids),
+		.of_match_table = wmt_dt_ids,
 	},
 };
 
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 4e5c77834c50..6c9174530422 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -974,12 +974,11 @@ static int xuartps_probe(struct platform_device *pdev)
 		port->dev = &pdev->dev;
 		port->uartclk = clk_get_rate(clk);
 		port->private_data = clk;
-		dev_set_drvdata(&pdev->dev, port);
+		platform_set_drvdata(pdev, port);
 		rc = uart_add_one_port(&xuartps_uart_driver, port);
 		if (rc) {
 			dev_err(&pdev->dev,
 				"uart_add_one_port() failed; err=%i\n", rc);
-			dev_set_drvdata(&pdev->dev, NULL);
 			return rc;
 		}
 		return 0;
@@ -994,46 +993,17 @@ static int xuartps_probe(struct platform_device *pdev)
  **/
 static int xuartps_remove(struct platform_device *pdev)
 {
-	struct uart_port *port = dev_get_drvdata(&pdev->dev);
+	struct uart_port *port = platform_get_drvdata(pdev);
 	struct clk *clk = port->private_data;
 	int rc;
 
 	/* Remove the xuartps port from the serial core */
 	rc = uart_remove_one_port(&xuartps_uart_driver, port);
-	dev_set_drvdata(&pdev->dev, NULL);
 	port->mapbase = 0;
 	clk_disable_unprepare(clk);
 	return rc;
 }
 
-/**
- * xuartps_suspend - suspend event
- * @pdev: Pointer to the platform device structure
- * @state: State of the device
- *
- * Returns 0
- **/
-static int xuartps_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	/* Call the API provided in serial_core.c file which handles
-	 * the suspend.
-	 */
-	uart_suspend_port(&xuartps_uart_driver, &xuartps_port[pdev->id]);
-	return 0;
-}
-
-/**
- * xuartps_resume - Resume after a previous suspend
- * @pdev: Pointer to the platform device structure
- *
- * Returns 0
- **/
-static int xuartps_resume(struct platform_device *pdev)
-{
-	uart_resume_port(&xuartps_uart_driver, &xuartps_port[pdev->id]);
-	return 0;
-}
-
 /* Match table for of_platform binding */
 static struct of_device_id xuartps_of_match[] = {
 	{ .compatible = "xlnx,xuartps", },
@@ -1044,8 +1014,6 @@ MODULE_DEVICE_TABLE(of, xuartps_of_match);
 static struct platform_driver xuartps_platform_driver = {
 	.probe   = xuartps_probe,		/* Probe method */
 	.remove  = xuartps_remove,		/* Detach method */
-	.suspend = xuartps_suspend,		/* Suspend */
-	.resume  = xuartps_resume,		/* Resume after a suspend */
 	.driver  = {
 		.owner = THIS_MODULE,
 		.name = XUARTPS_NAME,		/* Driver name */
diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
index b51c15408ff3..5f68f2cfdfd0 100644
--- a/drivers/tty/sysrq.c
+++ b/drivers/tty/sysrq.c
@@ -932,7 +932,7 @@ static int sysrq_reset_seq_param_set(const char *buffer,
 	unsigned long val;
 	int error;
 
-	error = strict_strtoul(buffer, 0, &val);
+	error = kstrtoul(buffer, 0, &val);
 	if (error < 0)
 		return error;
 
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 6464029e4860..366af832794b 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1618,6 +1618,8 @@ static void release_tty(struct tty_struct *tty, int idx)
 	tty_free_termios(tty);
 	tty_driver_remove_tty(tty->driver, tty);
 	tty->port->itty = NULL;
+	if (tty->link)
+		tty->link->port->itty = NULL;
 	cancel_work_sync(&tty->port->buf.work);
 
 	if (tty->link)
@@ -2138,6 +2140,7 @@ static unsigned int tty_poll(struct file *filp, poll_table *wait)
 static int __tty_fasync(int fd, struct file *filp, int on)
 {
 	struct tty_struct *tty = file_tty(filp);
+	struct tty_ldisc *ldisc;
 	unsigned long flags;
 	int retval = 0;
 
@@ -2148,11 +2151,17 @@ static int __tty_fasync(int fd, struct file *filp, int on)
 	if (retval <= 0)
 		goto out;
 
+	ldisc = tty_ldisc_ref(tty);
+	if (ldisc) {
+		if (ldisc->ops->fasync)
+			ldisc->ops->fasync(tty, on);
+		tty_ldisc_deref(ldisc);
+	}
+
 	if (on) {
 		enum pid_type type;
 		struct pid *pid;
-		if (!waitqueue_active(&tty->read_wait))
-			tty->minimum_to_wake = 1;
+
 		spin_lock_irqsave(&tty->ctrl_lock, flags);
 		if (tty->pgrp) {
 			pid = tty->pgrp;
@@ -2165,13 +2174,7 @@ static int __tty_fasync(int fd, struct file *filp, int on)
 		spin_unlock_irqrestore(&tty->ctrl_lock, flags);
 		retval = __f_setown(filp, pid, type, 0);
 		put_pid(pid);
-		if (retval)
-			goto out;
-	} else {
-		if (!tty->fasync && !waitqueue_active(&tty->read_wait))
-			tty->minimum_to_wake = N_TTY_BUF_SIZE;
 	}
-	retval = 0;
 out:
 	return retval;
 }
diff --git a/drivers/tty/tty_ldsem.c b/drivers/tty/tty_ldsem.c
new file mode 100644
index 000000000000..22fad8ad5ac2
--- /dev/null
+++ b/drivers/tty/tty_ldsem.c
@@ -0,0 +1,453 @@
+/*
+ * Ldisc rw semaphore
+ *
+ * The ldisc semaphore is semantically a rw_semaphore but which enforces
+ * an alternate policy, namely:
+ *   1) Supports lock wait timeouts
+ *   2) Write waiter has priority
+ *   3) Downgrading is not supported
+ *
+ * Implementation notes:
+ *   1) Upper half of semaphore count is a wait count (differs from rwsem
+ *	in that rwsem normalizes the upper half to the wait bias)
+ *   2) Lacks overflow checking
+ *
+ * The generic counting was copied and modified from include/asm-generic/rwsem.h
+ * by Paul Mackerras <paulus@samba.org>.
+ *
+ * The scheduling policy was copied and modified from lib/rwsem.c
+ * Written by David Howells (dhowells@redhat.com).
+ *
+ * This implementation incorporates the write lock stealing work of
+ * Michel Lespinasse <walken@google.com>.
+ *
+ * Copyright (C) 2013 Peter Hurley <peter@hurleysoftware.com>
+ *
+ * This file may be redistributed under the terms of the GNU General Public
+ * License v2.
+ */
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/atomic.h>
+#include <linux/tty.h>
+#include <linux/sched.h>
+
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define __acq(l, s, t, r, c, n, i)		\
+				lock_acquire(&(l)->dep_map, s, t, r, c, n, i)
+# define __rel(l, n, i)				\
+				lock_release(&(l)->dep_map, n, i)
+# ifdef CONFIG_PROVE_LOCKING
+#  define lockdep_acquire(l, s, t, i)		__acq(l, s, t, 0, 2, NULL, i)
+#  define lockdep_acquire_nest(l, s, t, n, i)	__acq(l, s, t, 0, 2, n, i)
+#  define lockdep_acquire_read(l, s, t, i)	__acq(l, s, t, 1, 2, NULL, i)
+#  define lockdep_release(l, n, i)		__rel(l, n, i)
+# else
+#  define lockdep_acquire(l, s, t, i)		__acq(l, s, t, 0, 1, NULL, i)
+#  define lockdep_acquire_nest(l, s, t, n, i)	__acq(l, s, t, 0, 1, n, i)
+#  define lockdep_acquire_read(l, s, t, i)	__acq(l, s, t, 1, 1, NULL, i)
+#  define lockdep_release(l, n, i)		__rel(l, n, i)
+# endif
+#else
+# define lockdep_acquire(l, s, t, i)		do { } while (0)
+# define lockdep_acquire_nest(l, s, t, n, i)	do { } while (0)
+# define lockdep_acquire_read(l, s, t, i)	do { } while (0)
+# define lockdep_release(l, n, i)		do { } while (0)
+#endif
+
+#ifdef CONFIG_LOCK_STAT
+# define lock_stat(_lock, stat)		lock_##stat(&(_lock)->dep_map, _RET_IP_)
+#else
+# define lock_stat(_lock, stat)		do { } while (0)
+#endif
+
+
+#if BITS_PER_LONG == 64
+# define LDSEM_ACTIVE_MASK	0xffffffffL
+#else
+# define LDSEM_ACTIVE_MASK	0x0000ffffL
+#endif
+
+#define LDSEM_UNLOCKED		0L
+#define LDSEM_ACTIVE_BIAS	1L
+#define LDSEM_WAIT_BIAS		(-LDSEM_ACTIVE_MASK-1)
+#define LDSEM_READ_BIAS		LDSEM_ACTIVE_BIAS
+#define LDSEM_WRITE_BIAS	(LDSEM_WAIT_BIAS + LDSEM_ACTIVE_BIAS)
+
+struct ldsem_waiter {
+	struct list_head list;
+	struct task_struct *task;
+};
+
+static inline long ldsem_atomic_update(long delta, struct ld_semaphore *sem)
+{
+	return atomic_long_add_return(delta, (atomic_long_t *)&sem->count);
+}
+
+static inline int ldsem_cmpxchg(long *old, long new, struct ld_semaphore *sem)
+{
+	long tmp = *old;
+	*old = atomic_long_cmpxchg(&sem->count, *old, new);
+	return *old == tmp;
+}
+
+/*
+ * Initialize an ldsem:
+ */
+void __init_ldsem(struct ld_semaphore *sem, const char *name,
+		  struct lock_class_key *key)
+{
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	/*
+	 * Make sure we are not reinitializing a held semaphore:
+	 */
+	debug_check_no_locks_freed((void *)sem, sizeof(*sem));
+	lockdep_init_map(&sem->dep_map, name, key, 0);
+#endif
+	sem->count = LDSEM_UNLOCKED;
+	sem->wait_readers = 0;
+	raw_spin_lock_init(&sem->wait_lock);
+	INIT_LIST_HEAD(&sem->read_wait);
+	INIT_LIST_HEAD(&sem->write_wait);
+}
+
+static void __ldsem_wake_readers(struct ld_semaphore *sem)
+{
+	struct ldsem_waiter *waiter, *next;
+	struct task_struct *tsk;
+	long adjust, count;
+
+	/* Try to grant read locks to all readers on the read wait list.
+	 * Note the 'active part' of the count is incremented by
+	 * the number of readers before waking any processes up.
+	 */
+	adjust = sem->wait_readers * (LDSEM_ACTIVE_BIAS - LDSEM_WAIT_BIAS);
+	count = ldsem_atomic_update(adjust, sem);
+	do {
+		if (count > 0)
+			break;
+		if (ldsem_cmpxchg(&count, count - adjust, sem))
+			return;
+	} while (1);
+
+	list_for_each_entry_safe(waiter, next, &sem->read_wait, list) {
+		tsk = waiter->task;
+		smp_mb();
+		waiter->task = NULL;
+		wake_up_process(tsk);
+		put_task_struct(tsk);
+	}
+	INIT_LIST_HEAD(&sem->read_wait);
+	sem->wait_readers = 0;
+}
+
+static inline int writer_trylock(struct ld_semaphore *sem)
+{
+	/* only wake this writer if the active part of the count can be
+	 * transitioned from 0 -> 1
+	 */
+	long count = ldsem_atomic_update(LDSEM_ACTIVE_BIAS, sem);
+	do {
+		if ((count & LDSEM_ACTIVE_MASK) == LDSEM_ACTIVE_BIAS)
+			return 1;
+		if (ldsem_cmpxchg(&count, count - LDSEM_ACTIVE_BIAS, sem))
+			return 0;
+	} while (1);
+}
+
+static void __ldsem_wake_writer(struct ld_semaphore *sem)
+{
+	struct ldsem_waiter *waiter;
+
+	waiter = list_entry(sem->write_wait.next, struct ldsem_waiter, list);
+	wake_up_process(waiter->task);
+}
+
+/*
+ * handle the lock release when processes blocked on it that can now run
+ * - if we come here from up_xxxx(), then:
+ *   - the 'active part' of count (&0x0000ffff) reached 0 (but may have changed)
+ *   - the 'waiting part' of count (&0xffff0000) is -ve (and will still be so)
+ * - the spinlock must be held by the caller
+ * - woken process blocks are discarded from the list after having task zeroed
+ */
+static void __ldsem_wake(struct ld_semaphore *sem)
+{
+	if (!list_empty(&sem->write_wait))
+		__ldsem_wake_writer(sem);
+	else if (!list_empty(&sem->read_wait))
+		__ldsem_wake_readers(sem);
+}
+
+static void ldsem_wake(struct ld_semaphore *sem)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&sem->wait_lock, flags);
+	__ldsem_wake(sem);
+	raw_spin_unlock_irqrestore(&sem->wait_lock, flags);
+}
+
+/*
+ * wait for the read lock to be granted
+ */
+static struct ld_semaphore __sched *
+down_read_failed(struct ld_semaphore *sem, long count, long timeout)
+{
+	struct ldsem_waiter waiter;
+	struct task_struct *tsk = current;
+	long adjust = -LDSEM_ACTIVE_BIAS + LDSEM_WAIT_BIAS;
+
+	/* set up my own style of waitqueue */
+	raw_spin_lock_irq(&sem->wait_lock);
+
+	/* Try to reverse the lock attempt but if the count has changed
+	 * so that reversing fails, check if there are are no waiters,
+	 * and early-out if not */
+	do {
+		if (ldsem_cmpxchg(&count, count + adjust, sem))
+			break;
+		if (count > 0) {
+			raw_spin_unlock_irq(&sem->wait_lock);
+			return sem;
+		}
+	} while (1);
+
+	list_add_tail(&waiter.list, &sem->read_wait);
+	sem->wait_readers++;
+
+	waiter.task = tsk;
+	get_task_struct(tsk);
+
+	/* if there are no active locks, wake the new lock owner(s) */
+	if ((count & LDSEM_ACTIVE_MASK) == 0)
+		__ldsem_wake(sem);
+
+	raw_spin_unlock_irq(&sem->wait_lock);
+
+	/* wait to be given the lock */
+	for (;;) {
+		set_task_state(tsk, TASK_UNINTERRUPTIBLE);
+
+		if (!waiter.task)
+			break;
+		if (!timeout)
+			break;
+		timeout = schedule_timeout(timeout);
+	}
+
+	__set_task_state(tsk, TASK_RUNNING);
+
+	if (!timeout) {
+		/* lock timed out but check if this task was just
+		 * granted lock ownership - if so, pretend there
+		 * was no timeout; otherwise, cleanup lock wait */
+		raw_spin_lock_irq(&sem->wait_lock);
+		if (waiter.task) {
+			ldsem_atomic_update(-LDSEM_WAIT_BIAS, sem);
+			list_del(&waiter.list);
+			raw_spin_unlock_irq(&sem->wait_lock);
+			put_task_struct(waiter.task);
+			return NULL;
+		}
+		raw_spin_unlock_irq(&sem->wait_lock);
+	}
+
+	return sem;
+}
+
+/*
+ * wait for the write lock to be granted
+ */
+static struct ld_semaphore __sched *
+down_write_failed(struct ld_semaphore *sem, long count, long timeout)
+{
+	struct ldsem_waiter waiter;
+	struct task_struct *tsk = current;
+	long adjust = -LDSEM_ACTIVE_BIAS;
+	int locked = 0;
+
+	/* set up my own style of waitqueue */
+	raw_spin_lock_irq(&sem->wait_lock);
+
+	/* Try to reverse the lock attempt but if the count has changed
+	 * so that reversing fails, check if the lock is now owned,
+	 * and early-out if so */
+	do {
+		if (ldsem_cmpxchg(&count, count + adjust, sem))
+			break;
+		if ((count & LDSEM_ACTIVE_MASK) == LDSEM_ACTIVE_BIAS) {
+			raw_spin_unlock_irq(&sem->wait_lock);
+			return sem;
+		}
+	} while (1);
+
+	list_add_tail(&waiter.list, &sem->write_wait);
+
+	waiter.task = tsk;
+
+	set_task_state(tsk, TASK_UNINTERRUPTIBLE);
+	for (;;) {
+		if (!timeout)
+			break;
+		raw_spin_unlock_irq(&sem->wait_lock);
+		timeout = schedule_timeout(timeout);
+		raw_spin_lock_irq(&sem->wait_lock);
+		set_task_state(tsk, TASK_UNINTERRUPTIBLE);
+		if ((locked = writer_trylock(sem)))
+			break;
+	}
+
+	if (!locked)
+		ldsem_atomic_update(-LDSEM_WAIT_BIAS, sem);
+	list_del(&waiter.list);
+	raw_spin_unlock_irq(&sem->wait_lock);
+
+	__set_task_state(tsk, TASK_RUNNING);
+
+	/* lock wait may have timed out */
+	if (!locked)
+		return NULL;
+	return sem;
+}
+
+
+
+static inline int __ldsem_down_read_nested(struct ld_semaphore *sem,
+					   int subclass, long timeout)
+{
+	long count;
+
+	lockdep_acquire_read(sem, subclass, 0, _RET_IP_);
+
+	count = ldsem_atomic_update(LDSEM_READ_BIAS, sem);
+	if (count <= 0) {
+		lock_stat(sem, contended);
+		if (!down_read_failed(sem, count, timeout)) {
+			lockdep_release(sem, 1, _RET_IP_);
+			return 0;
+		}
+	}
+	lock_stat(sem, acquired);
+	return 1;
+}
+
+static inline int __ldsem_down_write_nested(struct ld_semaphore *sem,
+					    int subclass, long timeout)
+{
+	long count;
+
+	lockdep_acquire(sem, subclass, 0, _RET_IP_);
+
+	count = ldsem_atomic_update(LDSEM_WRITE_BIAS, sem);
+	if ((count & LDSEM_ACTIVE_MASK) != LDSEM_ACTIVE_BIAS) {
+		lock_stat(sem, contended);
+		if (!down_write_failed(sem, count, timeout)) {
+			lockdep_release(sem, 1, _RET_IP_);
+			return 0;
+		}
+	}
+	lock_stat(sem, acquired);
+	return 1;
+}
+
+
+/*
+ * lock for reading -- returns 1 if successful, 0 if timed out
+ */
+int __sched ldsem_down_read(struct ld_semaphore *sem, long timeout)
+{
+	might_sleep();
+	return __ldsem_down_read_nested(sem, 0, timeout);
+}
+
+/*
+ * trylock for reading -- returns 1 if successful, 0 if contention
+ */
+int ldsem_down_read_trylock(struct ld_semaphore *sem)
+{
+	long count = sem->count;
+
+	while (count >= 0) {
+		if (ldsem_cmpxchg(&count, count + LDSEM_READ_BIAS, sem)) {
+			lockdep_acquire_read(sem, 0, 1, _RET_IP_);
+			lock_stat(sem, acquired);
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/*
+ * lock for writing -- returns 1 if successful, 0 if timed out
+ */
+int __sched ldsem_down_write(struct ld_semaphore *sem, long timeout)
+{
+	might_sleep();
+	return __ldsem_down_write_nested(sem, 0, timeout);
+}
+
+/*
+ * trylock for writing -- returns 1 if successful, 0 if contention
+ */
+int ldsem_down_write_trylock(struct ld_semaphore *sem)
+{
+	long count = sem->count;
+
+	while ((count & LDSEM_ACTIVE_MASK) == 0) {
+		if (ldsem_cmpxchg(&count, count + LDSEM_WRITE_BIAS, sem)) {
+			lockdep_acquire(sem, 0, 1, _RET_IP_);
+			lock_stat(sem, acquired);
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/*
+ * release a read lock
+ */
+void ldsem_up_read(struct ld_semaphore *sem)
+{
+	long count;
+
+	lockdep_release(sem, 1, _RET_IP_);
+
+	count = ldsem_atomic_update(-LDSEM_READ_BIAS, sem);
+	if (count < 0 && (count & LDSEM_ACTIVE_MASK) == 0)
+		ldsem_wake(sem);
+}
+
+/*
+ * release a write lock
+ */
+void ldsem_up_write(struct ld_semaphore *sem)
+{
+	long count;
+
+	lockdep_release(sem, 1, _RET_IP_);
+
+	count = ldsem_atomic_update(-LDSEM_WRITE_BIAS, sem);
+	if (count < 0)
+		ldsem_wake(sem);
+}
+
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+
+int ldsem_down_read_nested(struct ld_semaphore *sem, int subclass, long timeout)
+{
+	might_sleep();
+	return __ldsem_down_read_nested(sem, subclass, timeout);
+}
+
+int ldsem_down_write_nested(struct ld_semaphore *sem, int subclass,
+			    long timeout)
+{
+	might_sleep();
+	return __ldsem_down_write_nested(sem, subclass, timeout);
+}
+
+#endif
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 740202d8a5c4..c677829baa8b 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -3086,17 +3086,6 @@ err:
 };
 
 
-static int bind_con_driver(const struct consw *csw, int first, int last,
-			   int deflt)
-{
-	int ret;
-
-	console_lock();
-	ret = do_bind_con_driver(csw, first, last, deflt);
-	console_unlock();
-	return ret;
-}
-
 #ifdef CONFIG_VT_HW_CONSOLE_BINDING
 static int con_is_graphics(const struct consw *csw, int first, int last)
 {
@@ -3114,34 +3103,6 @@ static int con_is_graphics(const struct consw *csw, int first, int last)
 	return retval;
 }
 
-/**
- * unbind_con_driver - unbind a console driver
- * @csw: pointer to console driver to unregister
- * @first: first in range of consoles that @csw should be unbound from
- * @last: last in range of consoles that @csw should be unbound from
- * @deflt: should next bound console driver be default after @csw is unbound?
- *
- * To unbind a driver from all possible consoles, pass 0 as @first and
- * %MAX_NR_CONSOLES as @last.
- *
- * @deflt controls whether the console that ends up replacing @csw should be
- * the default console.
- *
- * RETURNS:
- * -ENODEV if @csw isn't a registered console driver or can't be unregistered
- * or 0 on success.
- */
-int unbind_con_driver(const struct consw *csw, int first, int last, int deflt)
-{
-	int retval;
-
-	console_lock();
-	retval = do_unbind_con_driver(csw, first, last, deflt);
-	console_unlock();
-	return retval;
-}
-EXPORT_SYMBOL(unbind_con_driver);
-
 /* unlocked version of unbind_con_driver() */
 int do_unbind_con_driver(const struct consw *csw, int first, int last, int deflt)
 {
@@ -3262,8 +3223,11 @@ static int vt_bind(struct con_driver *con)
 		if (first == 0 && last == MAX_NR_CONSOLES -1)
 			deflt = 1;
 
-		if (first != -1)
-			bind_con_driver(csw, first, last, deflt);
+		if (first != -1) {
+			console_lock();
+			do_bind_con_driver(csw, first, last, deflt);
+			console_unlock();
+		}
 
 		first = -1;
 		last = -1;
@@ -3301,8 +3265,11 @@ static int vt_unbind(struct con_driver *con)
 		if (first == 0 && last == MAX_NR_CONSOLES -1)
 			deflt = 1;
 
-		if (first != -1)
-			unbind_con_driver(csw, first, last, deflt);
+		if (first != -1) {
+			console_lock();
+			do_unbind_con_driver(csw, first, last, deflt);
+			console_unlock();
+		}
 
 		first = -1;
 		last = -1;
@@ -3574,29 +3541,9 @@ err:
 	return retval;
 }
 
-/**
- * register_con_driver - register console driver to console layer
- * @csw: console driver
- * @first: the first console to take over, minimum value is 0
- * @last: the last console to take over, maximum value is MAX_NR_CONSOLES -1
- *
- * DESCRIPTION: This function registers a console driver which can later
- * bind to a range of consoles specified by @first and @last. It will
- * also initialize the console driver by calling con_startup().
- */
-int register_con_driver(const struct consw *csw, int first, int last)
-{
-	int retval;
-
-	console_lock();
-	retval = do_register_con_driver(csw, first, last);
-	console_unlock();
-	return retval;
-}
-EXPORT_SYMBOL(register_con_driver);
 
 /**
- * unregister_con_driver - unregister console driver from console layer
+ * do_unregister_con_driver - unregister console driver from console layer
  * @csw: console driver
  *
  * DESCRIPTION: All drivers that registers to the console layer must
@@ -3606,17 +3553,6 @@ EXPORT_SYMBOL(register_con_driver);
  *
  * The driver must unbind first prior to unregistration.
  */
-int unregister_con_driver(const struct consw *csw)
-{
-	int retval;
-
-	console_lock();
-	retval = do_unregister_con_driver(csw);
-	console_unlock();
-	return retval;
-}
-EXPORT_SYMBOL(unregister_con_driver);
-
 int do_unregister_con_driver(const struct consw *csw)
 {
 	int i, retval = -ENODEV;
@@ -3654,7 +3590,7 @@ EXPORT_SYMBOL_GPL(do_unregister_con_driver);
  *	when a driver wants to take over some existing consoles
  *	and become default driver for newly opened ones.
  *
- *	take_over_console is basically a register followed by unbind
+ *	do_take_over_console is basically a register followed by unbind
  */
 int do_take_over_console(const struct consw *csw, int first, int last, int deflt)
 {
@@ -3675,30 +3611,6 @@ int do_take_over_console(const struct consw *csw, int first, int last, int deflt
 }
 EXPORT_SYMBOL_GPL(do_take_over_console);
 
-/*
- *	If we support more console drivers, this function is used
- *	when a driver wants to take over some existing consoles
- *	and become default driver for newly opened ones.
- *
- *	take_over_console is basically a register followed by unbind
- */
-int take_over_console(const struct consw *csw, int first, int last, int deflt)
-{
-	int err;
-
-	err = register_con_driver(csw, first, last);
-	/*
-	 * If we get an busy error we still want to bind the console driver
-	 * and return success, as we may have unbound the console driver
-	 * but not unregistered it.
-	 */
-	if (err == -EBUSY)
-		err = 0;
-	if (!err)
-		bind_con_driver(csw, first, last, deflt);
-
-	return err;
-}
 
 /*
  * give_up_console is a wrapper to unregister_con_driver. It will only
@@ -3706,7 +3618,9 @@ int take_over_console(const struct consw *csw, int first, int last, int deflt)
  */
 void give_up_console(const struct consw *csw)
 {
-	unregister_con_driver(csw);
+	console_lock();
+	do_unregister_con_driver(csw);
+	console_unlock();
 }
 
 static int __init vtconsole_class_init(void)
@@ -4262,6 +4176,5 @@ EXPORT_SYMBOL(console_blanked);
 EXPORT_SYMBOL(vc_cons);
 EXPORT_SYMBOL(global_cursor_default);
 #ifndef VT_SINGLE_DRIVER
-EXPORT_SYMBOL(take_over_console);
 EXPORT_SYMBOL(give_up_console);
 #endif
diff --git a/drivers/usb/misc/sisusbvga/sisusb_con.c b/drivers/usb/misc/sisusbvga/sisusb_con.c
index 411e605f448a..a638c4e9a947 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_con.c
+++ b/drivers/usb/misc/sisusbvga/sisusb_con.c
@@ -208,7 +208,7 @@ sisusbcon_init(struct vc_data *c, int init)
 	struct sisusb_usb_data *sisusb;
 	int cols, rows;
 
-	/* This is called by take_over_console(),
+	/* This is called by do_take_over_console(),
 	 * ie by us/under our control. It is
 	 * only called after text mode and fonts
 	 * are set up/restored.
@@ -273,7 +273,7 @@ sisusbcon_deinit(struct vc_data *c)
 	struct sisusb_usb_data *sisusb;
 	int i;
 
-	/* This is called by take_over_console()
+	/* This is called by do_take_over_console()
 	 * and others, ie not under our control.
 	 */
 
@@ -1490,8 +1490,9 @@ sisusb_console_init(struct sisusb_usb_data *sisusb, int first, int last)
 	mutex_unlock(&sisusb->lock);
 
 	/* Now grab the desired console(s) */
-	ret = take_over_console(&sisusb_con, first - 1, last - 1, 0);
-
+	console_lock();
+	ret = do_take_over_console(&sisusb_con, first - 1, last - 1, 0);
+	console_unlock();
 	if (!ret)
 		sisusb->haveconsole = 1;
 	else {
@@ -1535,11 +1536,14 @@ sisusb_console_exit(struct sisusb_usb_data *sisusb)
 
 	if (sisusb->haveconsole) {
 		for (i = 0; i < MAX_NR_CONSOLES; i++)
-			if (sisusb->havethisconsole[i])
-				take_over_console(&sisusb_dummy_con, i, i, 0);
+			if (sisusb->havethisconsole[i]) {
+				console_lock();
+				do_take_over_console(&sisusb_dummy_con, i, i, 0);
+				console_unlock();
 				/* At this point, con_deinit for all our
-				 * consoles is executed by take_over_console().
+				 * consoles is executed by do_take_over_console().
 				 */
+			}
 		sisusb->haveconsole = 0;
 	}
 
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index a92783e480e6..d55b33757465 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -556,34 +556,6 @@ static int do_fbcon_takeover(int show_logo)
 	return err;
 }
 
-static int fbcon_takeover(int show_logo)
-{
-	int err, i;
-
-	if (!num_registered_fb)
-		return -ENODEV;
-
-	if (!show_logo)
-		logo_shown = FBCON_LOGO_DONTSHOW;
-
-	for (i = first_fb_vc; i <= last_fb_vc; i++)
-		con2fb_map[i] = info_idx;
-
-	err = take_over_console(&fb_con, first_fb_vc, last_fb_vc,
-				fbcon_is_default);
-
-	if (err) {
-		for (i = first_fb_vc; i <= last_fb_vc; i++) {
-			con2fb_map[i] = -1;
-		}
-		info_idx = -1;
-	} else {
-		fbcon_has_console_bind = 1;
-	}
-
-	return err;
-}
-
 #ifdef MODULE
 static void fbcon_prepare_logo(struct vc_data *vc, struct fb_info *info,
 			       int cols, int rows, int new_cols, int new_rows)
@@ -901,7 +873,7 @@ static int set_con2fb_map(int unit, int newidx, int user)
 /*
  *  Low Level Operations
  */
-/* NOTE: fbcon cannot be __init: it may be called from take_over_console later */
+/* NOTE: fbcon cannot be __init: it may be called from do_take_over_console later */
 static int var_to_display(struct display *disp,
 			  struct fb_var_screeninfo *var,
 			  struct fb_info *info)
@@ -3543,8 +3515,9 @@ static void fbcon_start(void)
 			}
 		}
 
+		do_fbcon_takeover(0);
 		console_unlock();
-		fbcon_takeover(0);
+
 	}
 }
 
@@ -3648,8 +3621,8 @@ static void __exit fb_console_exit(void)
 	fbcon_deinit_device();
 	device_destroy(fb_class, MKDEV(0, 0));
 	fbcon_exit();
+	do_unregister_con_driver(&fb_con);
 	console_unlock();
-	unregister_con_driver(&fb_con);
 }	
 
 module_exit(fb_console_exit);
diff --git a/drivers/video/console/mdacon.c b/drivers/video/console/mdacon.c
index 0b67866cae10..296e94561556 100644
--- a/drivers/video/console/mdacon.c
+++ b/drivers/video/console/mdacon.c
@@ -585,10 +585,14 @@ static const struct consw mda_con = {
 
 int __init mda_console_init(void)
 {
+	int err;
+
 	if (mda_first_vc > mda_last_vc)
 		return 1;
-
-	return take_over_console(&mda_con, mda_first_vc-1, mda_last_vc-1, 0);
+	console_lock();
+	err = do_take_over_console(&mda_con, mda_first_vc-1, mda_last_vc-1, 0);
+	console_unlock();
+	return err;
 }
 
 static void __exit mda_console_exit(void)
diff --git a/drivers/video/console/newport_con.c b/drivers/video/console/newport_con.c
index b05afd03729e..a6ab9299813c 100644
--- a/drivers/video/console/newport_con.c
+++ b/drivers/video/console/newport_con.c
@@ -297,7 +297,7 @@ static void newport_exit(void)
 		newport_set_def_font(i, NULL);
 }
 
-/* Can't be __init, take_over_console may call it later */
+/* Can't be __init, do_take_over_console may call it later */
 static const char *newport_startup(void)
 {
 	int i;
@@ -746,6 +746,7 @@ static int newport_probe(struct gio_device *dev,
 			 const struct gio_device_id *id)
 {
 	unsigned long newport_addr;
+	int err;
 
 	if (!dev->resource.start)
 		return -EINVAL;
@@ -759,8 +760,10 @@ static int newport_probe(struct gio_device *dev,
 
 	npregs = (struct newport_regs *)/* ioremap cannot fail */
 		ioremap(newport_addr, sizeof(struct newport_regs));
-
-	return take_over_console(&newport_con, 0, MAX_NR_CONSOLES - 1, 1);
+	console_lock();
+	err = do_take_over_console(&newport_con, 0, MAX_NR_CONSOLES - 1, 1);
+	console_unlock();
+	return err;
 }
 
 static void newport_remove(struct gio_device *dev)
diff --git a/drivers/video/console/sticon.c b/drivers/video/console/sticon.c
index 491c1c1baf4c..5f65ca3d8564 100644
--- a/drivers/video/console/sticon.c
+++ b/drivers/video/console/sticon.c
@@ -372,6 +372,7 @@ static const struct consw sti_con = {
 
 static int __init sticonsole_init(void)
 {
+    int err;
     /* already initialized ? */
     if (sticon_sti)
 	 return 0;
@@ -382,7 +383,10 @@ static int __init sticonsole_init(void)
 
     if (conswitchp == &dummy_con) {
 	printk(KERN_INFO "sticon: Initializing STI text console.\n");
-	return take_over_console(&sti_con, 0, MAX_NR_CONSOLES - 1, 1);
+	console_lock();
+	err = do_take_over_console(&sti_con, 0, MAX_NR_CONSOLES - 1, 1);
+	console_unlock();
+	return err;
     }
     return 0;
 }
diff --git a/include/linux/console.h b/include/linux/console.h
index 73bab0f58af5..7571a16bd653 100644
--- a/include/linux/console.h
+++ b/include/linux/console.h
@@ -75,10 +75,7 @@ extern const struct consw newport_con;	/* SGI Newport console  */
 extern const struct consw prom_con;	/* SPARC PROM console */
 
 int con_is_bound(const struct consw *csw);
-int register_con_driver(const struct consw *csw, int first, int last);
-int unregister_con_driver(const struct consw *csw);
 int do_unregister_con_driver(const struct consw *csw);
-int take_over_console(const struct consw *sw, int first, int last, int deflt);
 int do_take_over_console(const struct consw *sw, int first, int last, int deflt);
 void give_up_console(const struct consw *sw);
 #ifdef CONFIG_HW_CONSOLE
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 87d4bbc773fc..b98291ac7f14 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -31,6 +31,13 @@
 #include <linux/sysrq.h>
 #include <uapi/linux/serial_core.h>
 
+#ifdef CONFIG_SERIAL_CORE_CONSOLE
+#define uart_console(port) \
+	((port)->cons && (port)->cons->index == (port)->line)
+#else
+#define uart_console(port)      (0)
+#endif
+
 struct uart_port;
 struct serial_struct;
 struct device;
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 8780bd2a272a..01ac30efd6a6 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -272,7 +272,6 @@ struct tty_struct {
 #define N_TTY_BUF_SIZE 4096
 
 	unsigned char closing:1;
-	unsigned short minimum_to_wake;
 	unsigned char *write_buf;
 	int write_cnt;
 	/* If the tty has a pending do_SAK, queue it here - akpm */
@@ -309,8 +308,6 @@ struct tty_file_private {
 #define TTY_LDISC 		9	/* Line discipline attached */
 #define TTY_LDISC_CHANGING 	10	/* Line discipline changing */
 #define TTY_LDISC_OPEN	 	11	/* Line discipline is open */
-#define TTY_HW_COOK_OUT 	14	/* Hardware can do output cooking */
-#define TTY_HW_COOK_IN 		15	/* Hardware can do input cooking */
 #define TTY_PTY_LOCK 		16	/* pty private */
 #define TTY_NO_WRITE_SPLIT 	17	/* Preserve write boundaries to driver */
 #define TTY_HUPPED 		18	/* Post driver->hangup() */
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
index 58390c73df8b..a1b048999821 100644
--- a/include/linux/tty_ldisc.h
+++ b/include/linux/tty_ldisc.h
@@ -100,6 +100,11 @@
  *	seek to perform this action quickly but should wait until
  *	any pending driver I/O is completed.
  *
+ * void (*fasync)(struct tty_struct *, int on)
+ *
+ *	Notify line discipline when signal-driven I/O is enabled or
+ *	disabled.
+ *
  * void (*dcd_change)(struct tty_struct *tty, unsigned int status)
  *
  *	Tells the discipline that the DCD pin has changed its status.
@@ -110,6 +115,52 @@
 #include <linux/wait.h>
 #include <linux/wait.h>
 
+
+/*
+ * the semaphore definition
+ */
+struct ld_semaphore {
+	long			count;
+	raw_spinlock_t		wait_lock;
+	unsigned int		wait_readers;
+	struct list_head	read_wait;
+	struct list_head	write_wait;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map	dep_map;
+#endif
+};
+
+extern void __init_ldsem(struct ld_semaphore *sem, const char *name,
+			 struct lock_class_key *key);
+
+#define init_ldsem(sem)						\
+do {								\
+	static struct lock_class_key __key;			\
+								\
+	__init_ldsem((sem), #sem, &__key);			\
+} while (0)
+
+
+extern int ldsem_down_read(struct ld_semaphore *sem, long timeout);
+extern int ldsem_down_read_trylock(struct ld_semaphore *sem);
+extern int ldsem_down_write(struct ld_semaphore *sem, long timeout);
+extern int ldsem_down_write_trylock(struct ld_semaphore *sem);
+extern void ldsem_up_read(struct ld_semaphore *sem);
+extern void ldsem_up_write(struct ld_semaphore *sem);
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+extern int ldsem_down_read_nested(struct ld_semaphore *sem, int subclass,
+				  long timeout);
+extern int ldsem_down_write_nested(struct ld_semaphore *sem, int subclass,
+				   long timeout);
+#else
+# define ldsem_down_read_nested(sem, subclass, timeout)		\
+		ldsem_down_read(sem, timeout)
+# define ldsem_down_write_nested(sem, subclass, timeout)	\
+		ldsem_down_write(sem, timeout)
+#endif
+
+
 struct tty_ldisc_ops {
 	int	magic;
 	char	*name;
@@ -143,6 +194,7 @@ struct tty_ldisc_ops {
 			       char *fp, int count);
 	void	(*write_wakeup)(struct tty_struct *);
 	void	(*dcd_change)(struct tty_struct *, unsigned int);
+	void	(*fasync)(struct tty_struct *tty, int on);
 
 	struct  module *owner;
 
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
index 0d33fca48774..8d7634247fb4 100644
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -133,8 +133,6 @@ void change_console(struct vc_data *new_vc);
 void reset_vc(struct vc_data *vc);
 extern int do_unbind_con_driver(const struct consw *csw, int first, int last,
 			     int deflt);
-extern int unbind_con_driver(const struct consw *csw, int first, int last,
-			     int deflt);
 int vty_init(const struct file_operations *console_fops);
 
 static inline bool vt_force_oops_output(struct vc_data *vc)
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 74c2bf7211f8..c8eaeb5465ef 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -226,4 +226,7 @@
 /* Rocketport EXPRESS/INFINITY */
 #define PORT_RP2	102
 
+/* Freescale lpuart */
+#define PORT_LPUART	103
+
 #endif /* _UAPILINUX_SERIAL_CORE_H */