Merge branch 'mlxsw-Add-support-for-cable-info-access'

Jiri Pirko says:

====================
mlxsw: Add support for cable info access

Add support for cable info access via ethtool. This is done by accessing
the SFP+/QSFP internal EEPROM.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 207 insertions, 0 deletions

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 157b9b6f8485..1bd34d9a7b9e 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -5491,6 +5491,81 @@ static inline void mlxsw_reg_mtmp_unpack(char *payload, unsigned int *p_temp,
 		mlxsw_reg_mtmp_sensor_name_memcpy_from(payload, sensor_name);
 }
 
+/* MCIA - Management Cable Info Access
+ * -----------------------------------
+ * MCIA register is used to access the SFP+ and QSFP connector's EPROM.
+ */
+
+#define MLXSW_REG_MCIA_ID 0x9014
+#define MLXSW_REG_MCIA_LEN 0x40
+
+MLXSW_REG_DEFINE(mcia, MLXSW_REG_MCIA_ID, MLXSW_REG_MCIA_LEN);
+
+/* reg_mcia_l
+ * Lock bit. Setting this bit will lock the access to the specific
+ * cable. Used for updating a full page in a cable EPROM. Any access
+ * other then subsequence writes will fail while the port is locked.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mcia, l, 0x00, 31, 1);
+
+/* reg_mcia_module
+ * Module number.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, mcia, module, 0x00, 16, 8);
+
+/* reg_mcia_status
+ * Module status.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, mcia, status, 0x00, 0, 8);
+
+/* reg_mcia_i2c_device_address
+ * I2C device address.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mcia, i2c_device_address, 0x04, 24, 8);
+
+/* reg_mcia_page_number
+ * Page number.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mcia, page_number, 0x04, 16, 8);
+
+/* reg_mcia_device_address
+ * Device address.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mcia, device_address, 0x04, 0, 16);
+
+/* reg_mcia_size
+ * Number of bytes to read/write (up to 48 bytes).
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mcia, size, 0x08, 0, 16);
+
+#define MLXSW_SP_REG_MCIA_EEPROM_SIZE 48
+
+/* reg_mcia_eeprom
+ * Bytes to read/write.
+ * Access: RW
+ */
+MLXSW_ITEM_BUF(reg, mcia, eeprom, 0x10, MLXSW_SP_REG_MCIA_EEPROM_SIZE);
+
+static inline void mlxsw_reg_mcia_pack(char *payload, u8 module, u8 lock,
+				       u8 page_number, u16 device_addr,
+				       u8 size, u8 i2c_device_addr)
+{
+	MLXSW_REG_ZERO(mcia, payload);
+	mlxsw_reg_mcia_module_set(payload, module);
+	mlxsw_reg_mcia_l_set(payload, lock);
+	mlxsw_reg_mcia_page_number_set(payload, page_number);
+	mlxsw_reg_mcia_device_address_set(payload, device_addr);
+	mlxsw_reg_mcia_size_set(payload, size);
+	mlxsw_reg_mcia_i2c_device_address_set(payload, i2c_device_addr);
+}
+
 /* MPAT - Monitoring Port Analyzer Table
  * -------------------------------------
  * MPAT Register is used to query and configure the Switch PortAnalyzer Table.
@@ -6433,6 +6508,7 @@ static const struct mlxsw_reg_info *mlxsw_reg_infos[] = {
 	MLXSW_REG(mfsl),
 	MLXSW_REG(mtcap),
 	MLXSW_REG(mtmp),
+	MLXSW_REG(mcia),
 	MLXSW_REG(mpat),
 	MLXSW_REG(mpar),
 	MLXSW_REG(mlcr),
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index 0e51c3693243..60bf8f27cc00 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -2519,6 +2519,135 @@ out:
 	return err;
 }
 
+#define MLXSW_SP_QSFP_I2C_ADDR 0x50
+
+static int mlxsw_sp_query_module_eeprom(struct mlxsw_sp_port *mlxsw_sp_port,
+					u16 offset, u16 size, void *data,
+					unsigned int *p_read_size)
+{
+	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
+	char eeprom_tmp[MLXSW_SP_REG_MCIA_EEPROM_SIZE];
+	char mcia_pl[MLXSW_REG_MCIA_LEN];
+	int status;
+	int err;
+
+	size = min_t(u16, size, MLXSW_SP_REG_MCIA_EEPROM_SIZE);
+	mlxsw_reg_mcia_pack(mcia_pl, mlxsw_sp_port->mapping.module,
+			    0, 0, offset, size, MLXSW_SP_QSFP_I2C_ADDR);
+
+	err = mlxsw_reg_query(mlxsw_sp->core, MLXSW_REG(mcia), mcia_pl);
+	if (err)
+		return err;
+
+	status = mlxsw_reg_mcia_status_get(mcia_pl);
+	if (status)
+		return -EIO;
+
+	mlxsw_reg_mcia_eeprom_memcpy_from(mcia_pl, eeprom_tmp);
+	memcpy(data, eeprom_tmp, size);
+	*p_read_size = size;
+
+	return 0;
+}
+
+enum mlxsw_sp_eeprom_module_info_rev_id {
+	MLXSW_SP_EEPROM_MODULE_INFO_REV_ID_UNSPC      = 0x00,
+	MLXSW_SP_EEPROM_MODULE_INFO_REV_ID_8436       = 0x01,
+	MLXSW_SP_EEPROM_MODULE_INFO_REV_ID_8636       = 0x03,
+};
+
+enum mlxsw_sp_eeprom_module_info_id {
+	MLXSW_SP_EEPROM_MODULE_INFO_ID_SFP              = 0x03,
+	MLXSW_SP_EEPROM_MODULE_INFO_ID_QSFP             = 0x0C,
+	MLXSW_SP_EEPROM_MODULE_INFO_ID_QSFP_PLUS        = 0x0D,
+	MLXSW_SP_EEPROM_MODULE_INFO_ID_QSFP28           = 0x11,
+};
+
+enum mlxsw_sp_eeprom_module_info {
+	MLXSW_SP_EEPROM_MODULE_INFO_ID,
+	MLXSW_SP_EEPROM_MODULE_INFO_REV_ID,
+	MLXSW_SP_EEPROM_MODULE_INFO_SIZE,
+};
+
+static int mlxsw_sp_get_module_info(struct net_device *netdev,
+				    struct ethtool_modinfo *modinfo)
+{
+	struct mlxsw_sp_port *mlxsw_sp_port = netdev_priv(netdev);
+	u8 module_info[MLXSW_SP_EEPROM_MODULE_INFO_SIZE];
+	u8 module_rev_id, module_id;
+	unsigned int read_size;
+	int err;
+
+	err = mlxsw_sp_query_module_eeprom(mlxsw_sp_port, 0,
+					   MLXSW_SP_EEPROM_MODULE_INFO_SIZE,
+					   module_info, &read_size);
+	if (err)
+		return err;
+
+	if (read_size < MLXSW_SP_EEPROM_MODULE_INFO_SIZE)
+		return -EIO;
+
+	module_rev_id = module_info[MLXSW_SP_EEPROM_MODULE_INFO_REV_ID];
+	module_id = module_info[MLXSW_SP_EEPROM_MODULE_INFO_ID];
+
+	switch (module_id) {
+	case MLXSW_SP_EEPROM_MODULE_INFO_ID_QSFP:
+		modinfo->type       = ETH_MODULE_SFF_8436;
+		modinfo->eeprom_len = ETH_MODULE_SFF_8436_LEN;
+		break;
+	case MLXSW_SP_EEPROM_MODULE_INFO_ID_QSFP_PLUS:
+	case MLXSW_SP_EEPROM_MODULE_INFO_ID_QSFP28:
+		if (module_id  == MLXSW_SP_EEPROM_MODULE_INFO_ID_QSFP28 ||
+		    module_rev_id >= MLXSW_SP_EEPROM_MODULE_INFO_REV_ID_8636) {
+			modinfo->type       = ETH_MODULE_SFF_8636;
+			modinfo->eeprom_len = ETH_MODULE_SFF_8636_LEN;
+		} else {
+			modinfo->type       = ETH_MODULE_SFF_8436;
+			modinfo->eeprom_len = ETH_MODULE_SFF_8436_LEN;
+		}
+		break;
+	case MLXSW_SP_EEPROM_MODULE_INFO_ID_SFP:
+		modinfo->type       = ETH_MODULE_SFF_8472;
+		modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int mlxsw_sp_get_module_eeprom(struct net_device *netdev,
+				      struct ethtool_eeprom *ee,
+				      u8 *data)
+{
+	struct mlxsw_sp_port *mlxsw_sp_port = netdev_priv(netdev);
+	int offset = ee->offset;
+	unsigned int read_size;
+	int i = 0;
+	int err;
+
+	if (!ee->len)
+		return -EINVAL;
+
+	memset(data, 0, ee->len);
+
+	while (i < ee->len) {
+		err = mlxsw_sp_query_module_eeprom(mlxsw_sp_port, offset,
+						   ee->len - i, data + i,
+						   &read_size);
+		if (err) {
+			netdev_err(mlxsw_sp_port->dev, "Eeprom query failed\n");
+			return err;
+		}
+
+		i += read_size;
+		offset += read_size;
+	}
+
+	return 0;
+}
+
 static const struct ethtool_ops mlxsw_sp_port_ethtool_ops = {
 	.get_drvinfo		= mlxsw_sp_port_get_drvinfo,
 	.get_link		= ethtool_op_get_link,
@@ -2531,6 +2660,8 @@ static const struct ethtool_ops mlxsw_sp_port_ethtool_ops = {
 	.get_link_ksettings	= mlxsw_sp_port_get_link_ksettings,
 	.set_link_ksettings	= mlxsw_sp_port_set_link_ksettings,
 	.flash_device		= mlxsw_sp_flash_device,
+	.get_module_info	= mlxsw_sp_get_module_info,
+	.get_module_eeprom	= mlxsw_sp_get_module_eeprom,
 };
 
 static int