usb: phy: generic: add vbus support

Add support for vbus detection and power supply. This code is more or
less stolen from phy-gpio-vbus-usb.c, and aims at providing a detection
mechanism for VBus (ie. usb cable plug) based on a GPIO line, and a
power supply activation which draws current from the VBus.

[ balbi@ti.com : fix build break ]

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Felipe Balbi <balbi@ti.com>

3 files changed, 98 insertions, 1 deletions

diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index d53928f3a6ea..dd05254241fb 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -27,6 +27,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/usb_phy_generic.h>
 #include <linux/slab.h>
@@ -39,6 +40,9 @@
 
 #include "phy-generic.h"
 
+#define VBUS_IRQ_FLAGS \
+	(IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)
+
 struct platform_device *usb_phy_generic_register(void)
 {
 	return platform_device_register_simple("usb_phy_generic",
@@ -66,6 +70,73 @@ static void nop_reset_set(struct usb_phy_generic *nop, int asserted)
 		usleep_range(10000, 20000);
 }
 
+/* interface to regulator framework */
+static void nop_set_vbus_draw(struct usb_phy_generic *nop, unsigned mA)
+{
+	struct regulator *vbus_draw = nop->vbus_draw;
+	int enabled;
+	int ret;
+
+	if (!vbus_draw)
+		return;
+
+	enabled = nop->vbus_draw_enabled;
+	if (mA) {
+		regulator_set_current_limit(vbus_draw, 0, 1000 * mA);
+		if (!enabled) {
+			ret = regulator_enable(vbus_draw);
+			if (ret < 0)
+				return;
+			nop->vbus_draw_enabled = 1;
+		}
+	} else {
+		if (enabled) {
+			ret = regulator_disable(vbus_draw);
+			if (ret < 0)
+				return;
+			nop->vbus_draw_enabled = 0;
+		}
+	}
+	nop->mA = mA;
+}
+
+
+static irqreturn_t nop_gpio_vbus_thread(int irq, void *data)
+{
+	struct usb_phy_generic *nop = data;
+	struct usb_otg *otg = nop->phy.otg;
+	int vbus, status;
+
+	vbus = gpiod_get_value(nop->gpiod_vbus);
+	if ((vbus ^ nop->vbus) == 0)
+		return IRQ_HANDLED;
+	nop->vbus = vbus;
+
+	if (vbus) {
+		status = USB_EVENT_VBUS;
+		otg->state = OTG_STATE_B_PERIPHERAL;
+		nop->phy.last_event = status;
+		usb_gadget_vbus_connect(otg->gadget);
+
+		/* drawing a "unit load" is *always* OK, except for OTG */
+		nop_set_vbus_draw(nop, 100);
+
+		atomic_notifier_call_chain(&nop->phy.notifier, status,
+					   otg->gadget);
+	} else {
+		nop_set_vbus_draw(nop, 0);
+
+		usb_gadget_vbus_disconnect(otg->gadget);
+		status = USB_EVENT_NONE;
+		otg->state = OTG_STATE_B_IDLE;
+		nop->phy.last_event = status;
+
+		atomic_notifier_call_chain(&nop->phy.notifier, status,
+					   otg->gadget);
+	}
+	return IRQ_HANDLED;
+}
+
 int usb_gen_phy_init(struct usb_phy *phy)
 {
 	struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
@@ -149,17 +220,23 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
 		needs_vcc = of_property_read_bool(node, "vcc-supply");
 		nop->gpiod_reset = devm_gpiod_get(dev, "reset-gpios");
 		err = PTR_ERR(nop->gpiod_reset);
+		if (!err) {
+			nop->gpiod_vbus = devm_gpiod_get(dev,
+							 "vbus-detect-gpio");
+			err = PTR_ERR(nop->gpiod_vbus);
+		}
 	} else if (pdata) {
 		type = pdata->type;
 		clk_rate = pdata->clk_rate;
 		needs_vcc = pdata->needs_vcc;
-		if (gpio_is_valid(gpio->gpio_reset)) {
+		if (gpio_is_valid(pdata->gpio_reset)) {
 			err = devm_gpio_request_one(dev, pdata->gpio_reset, 0,
 						    dev_name(dev));
 			if (!err)
 				nop->gpiod_reset =
 					gpio_to_desc(pdata->gpio_reset);
 		}
+		nop->gpiod_vbus = pdata->gpiod_vbus;
 	}
 
 	if (err == -EPROBE_DEFER)
@@ -224,6 +301,18 @@ static int usb_phy_generic_probe(struct platform_device *pdev)
 	err = usb_phy_gen_create_phy(dev, nop, dev_get_platdata(&pdev->dev));
 	if (err)
 		return err;
+	if (nop->gpiod_vbus) {
+		err = devm_request_threaded_irq(&pdev->dev,
+						gpiod_to_irq(nop->gpiod_vbus),
+						NULL, nop_gpio_vbus_thread,
+						VBUS_IRQ_FLAGS, "vbus_detect",
+						nop);
+		if (err) {
+			dev_err(&pdev->dev, "can't request irq %i, err: %d\n",
+				gpiod_to_irq(nop->gpiod_vbus), err);
+			return err;
+		}
+	}
 
 	nop->phy.init		= usb_gen_phy_init;
 	nop->phy.shutdown	= usb_gen_phy_shutdown;
diff --git a/drivers/usb/phy/phy-generic.h b/drivers/usb/phy/phy-generic.h
index 09924fdaaabe..0d0eadd54ed9 100644
--- a/drivers/usb/phy/phy-generic.h
+++ b/drivers/usb/phy/phy-generic.h
@@ -3,6 +3,7 @@
 
 #include <linux/usb/usb_phy_generic.h>
 #include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
 
 struct usb_phy_generic {
 	struct usb_phy phy;
@@ -10,6 +11,11 @@ struct usb_phy_generic {
 	struct clk *clk;
 	struct regulator *vcc;
 	struct gpio_desc *gpiod_reset;
+	struct gpio_desc *gpiod_vbus;
+	struct regulator *vbus_draw;
+	bool vbus_draw_enabled;
+	unsigned long mA;
+	unsigned int vbus;
 };
 
 int usb_gen_phy_init(struct usb_phy *phy);
diff --git a/include/linux/usb/usb_phy_generic.h b/include/linux/usb/usb_phy_generic.h
index 68adae83affc..c13632d5292e 100644
--- a/include/linux/usb/usb_phy_generic.h
+++ b/include/linux/usb/usb_phy_generic.h
@@ -2,6 +2,7 @@
 #define __LINUX_USB_NOP_XCEIV_H
 
 #include <linux/usb/otg.h>
+#include <linux/gpio/consumer.h>
 
 struct usb_phy_generic_platform_data {
 	enum usb_phy_type type;
@@ -11,6 +12,7 @@ struct usb_phy_generic_platform_data {
 	unsigned int needs_vcc:1;
 	unsigned int needs_reset:1;	/* deprecated */
 	int gpio_reset;
+	struct gpio_desc *gpiod_vbus;
 };
 
 #if IS_ENABLED(CONFIG_NOP_USB_XCEIV)