Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann: "This release brings up a new platform based on the old ARM9 core: the Nuvoton NPCM is used as a baseboard management controller, competing with the better known ASpeed AST2xx series. Another important change is the addition of ARMv7-A based chips in mach-stm32. The older parts in this platform are ARMv7-M based microcontrollers, now they are expanding to general-purpose workloads. The other changes are the usual defconfig updates to enable additional drivers, lesser bugfixes. The largest updates as often are the ongoing OMAP cleanups, but we also have a number of changes for the older PXA and davinci platforms this time. For the Renesas shmobile/r-car platform, some new infrastructure is needed to make the watchdog work correctly. Supporting Multiprocessing on Allwinner A80 required a significant amount of new code, but is not doing anything unexpected" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits) arm: npcm: modify configuration for the NPCM7xx BMC. MAINTAINERS: update entry for ARM/berlin ARM: omap2: fix am43xx build without L2X0 ARM: davinci: da8xx: simplify CFGCHIP regmap_config ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data ARM: multi_v7_defconfig: add NXP FlexCAN IP support ARM: multi_v7_defconfig: enable thermal driver for i.MX devices ARM: multi_v7_defconfig: add RN5T618 PMIC family support ARM: multi_v7_defconfig: add NXP graphics drivers ARM: multi_v7_defconfig: add GPMI NAND controller support ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs ARM: multi_v7_defconfig: configure I2C driver built-in arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE ARM: imx: fix imx6sll-only build ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well ARM: mxs_defconfig: Re-sync defconfig ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver ARM: imx_v4_v5_defconfig: Re-sync defconfig arm64: defconfig: enable stmmac ethernet to defconfig ARM: EXYNOS: Simplify code in coupled CPU idle hot path ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2018-04-06 06:21:08 +0200
committer: Linus Torvalds <torvalds@linux-foundation.org> 2018-04-06 06:21:08 +0200
commit: 167569343fac74ec6825a3ab982f795b5880e63e (patch)
tree: 965adb59fbe10d9f45a7fb90cb1ec1bc18d4613c
parent: Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/ar... (diff)
parent: arm: npcm: modify configuration for the NPCM7xx BMC. (diff)
download: linux-167569343fac74ec6825a3ab982f795b5880e63e.tar.xz
linux-167569343fac74ec6825a3ab982f795b5880e63e.zip
189 files changed, 4973 insertions, 3960 deletions
diff --git a/Documentation/arm/Atmel/README b/Documentation/arm/Microchip/README
index afb13c15389d..a366f37d38f1 100644
--- a/Documentation/arm/Atmel/README
+++ b/Documentation/arm/Microchip/README
@@ -1,54 +1,54 @@
-ARM Atmel SoCs (aka AT91)
-=========================
+ARM Microchip SoCs (aka AT91)
+=============================
 
 
 Introduction
 ------------
-This document gives useful information about the ARM Atmel SoCs that are
+This document gives useful information about the ARM Microchip SoCs that are
 currently supported in Linux Mainline (you know, the one on kernel.org).
 
-It is important to note that the Atmel | SMART ARM-based MPU product line is
-historically named "AT91" or "at91" throughout the Linux kernel development
-process even if this product prefix has completely disappeared from the
-official Atmel product name. Anyway, files, directories, git trees,
+It is important to note that the Microchip (previously Atmel) ARM-based MPU
+product line is historically named "AT91" or "at91" throughout the Linux kernel
+development process even if this product prefix has completely disappeared from
+the official Microchip product name. Anyway, files, directories, git trees,
 git branches/tags and email subject always contain this "at91" sub-string.
 
 
 AT91 SoCs
 ---------
 Documentation and detailed datasheet for each product are available on
-the Atmel website: http://www.atmel.com.
+the Microchip website: http://www.microchip.com.
 
   Flavors:
     * ARM 920 based SoC
       - at91rm9200
         + Datasheet
-          http://www.atmel.com/Images/doc1768.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-1768-32-bit-ARM920T-Embedded-Microprocessor-AT91RM9200_Datasheet.pdf
 
     * ARM 926 based SoCs
       - at91sam9260
         + Datasheet
-          http://www.atmel.com/Images/doc6221.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6221-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9260_Datasheet.pdf
 
       - at91sam9xe
         + Datasheet
-          http://www.atmel.com/Images/Atmel-6254-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9XE_Datasheet.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6254-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9XE_Datasheet.pdf
 
       - at91sam9261
         + Datasheet
-          http://www.atmel.com/Images/doc6062.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6062-ARM926EJ-S-Microprocessor-SAM9261_Datasheet.pdf
 
       - at91sam9263
         + Datasheet
-          http://www.atmel.com/Images/Atmel_6249_32-bit-ARM926EJ-S-Microcontroller_SAM9263_Datasheet.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6249-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9263_Datasheet.pdf
 
       - at91sam9rl
         + Datasheet
-          http://www.atmel.com/Images/doc6289.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/doc6289.pdf
 
       - at91sam9g20
         + Datasheet
-          http://www.atmel.com/Images/doc6384.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001516A.pdf
 
       - at91sam9g45 family
         - at91sam9g45
@@ -56,7 +56,7 @@ the Atmel website: http://www.atmel.com.
         - at91sam9m10
         - at91sam9m11 (device superset)
         + Datasheet
-          http://www.atmel.com/Images/Atmel-6437-32-bit-ARM926-Embedded-Microprocessor-SAM9M11_Datasheet.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6437-32-bit-ARM926-Embedded-Microprocessor-SAM9M11_Datasheet.pdf
 
       - at91sam9x5 family (aka "The 5 series")
         - at91sam9g15
@@ -65,11 +65,11 @@ the Atmel website: http://www.atmel.com.
         - at91sam9x25
         - at91sam9x35
         + Datasheet (can be considered as covering the whole family)
-          http://www.atmel.com/Images/Atmel_11055_32-bit-ARM926EJ-S-Microcontroller_SAM9X35_Datasheet.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-11055-32-bit-ARM926EJ-S-Microcontroller-SAM9X35_Datasheet.pdf
 
       - at91sam9n12
         + Datasheet
-          http://www.atmel.com/Images/Atmel_11063_32-bit-ARM926EJ-S-Microcontroller_SAM9N12CN11CN12_Datasheet.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001517A.pdf
 
     * ARM Cortex-A5 based SoCs
       - sama5d3 family
@@ -79,7 +79,7 @@ the Atmel website: http://www.atmel.com.
         - sama5d35
         - sama5d36 (device superset)
         + Datasheet
-          http://www.atmel.com/Images/Atmel-11121-32-bit-Cortex-A5-Microcontroller-SAMA5D3_Datasheet.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-11121-32-bit-Cortex-A5-Microcontroller-SAMA5D3_Datasheet.pdf
 
     * ARM Cortex-A5 + NEON based SoCs
       - sama5d4 family
@@ -88,7 +88,7 @@ the Atmel website: http://www.atmel.com.
         - sama5d43
         - sama5d44 (device superset)
         + Datasheet
-          http://www.atmel.com/Images/Atmel-11238-32-bit-Cortex-A5-Microcontroller-SAMA5D4_Datasheet.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/60001525A.pdf
 
       - sama5d2 family
         - sama5d21
@@ -99,7 +99,7 @@ the Atmel website: http://www.atmel.com.
         - sama5d27 (device superset)
         - sama5d28 (device superset + environmental monitors)
         + Datasheet
-          http://www.atmel.com/Images/Atmel-11267-32-bit-Cortex-A5-Microcontroller-SAMA5D2_Datasheet.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001476B.pdf
 
     * ARM Cortex-M7 MCUs
       - sams70 family
@@ -112,8 +112,6 @@ the Atmel website: http://www.atmel.com.
         - sams70q19
         - sams70q20
         - sams70q21
-        + Datasheet
-          http://www.atmel.com/Images/Atmel-11242-32-bit-Cortex-M7-Microcontroller-SAM-S70Q-SAM-S70N-SAM-S70J_Datasheet.pdf
 
       - samv70 family
         - samv70j19
@@ -122,8 +120,6 @@ the Atmel website: http://www.atmel.com.
         - samv70n20
         - samv70q19
         - samv70q20
-        + Datasheet
-          http://www.atmel.com/Images/Atmel-11297-32-bit-Cortex-M7-Microcontroller-SAM-V70Q-SAM-V70N-SAM-V70J_Datasheet.pdf
 
       - samv71 family
         - samv71j19
@@ -135,13 +131,15 @@ the Atmel website: http://www.atmel.com.
         - samv71q19
         - samv71q20
         - samv71q21
+
         + Datasheet
-          http://www.atmel.com/Images/Atmel-44003-32-bit-Cortex-M7-Microcontroller-SAM-V71Q-SAM-V71N-SAM-V71J_Datasheet.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/60001527A.pdf
+
 
 Linux kernel information
 ------------------------
 Linux kernel mach directory: arch/arm/mach-at91
-MAINTAINERS entry is: "ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES"
+MAINTAINERS entry is: "ARM/Microchip (AT91) SoC support"
 
 
 Device Tree for AT91 SoCs and boards
diff --git a/Documentation/arm/stm32/overview.rst b/Documentation/arm/stm32/overview.rst
new file mode 100644
index 000000000000..85cfc8410798
--- /dev/null
+++ b/Documentation/arm/stm32/overview.rst
@@ -0,0 +1,34 @@
+========================
+STM32 ARM Linux Overview
+========================
+
+Introduction
+------------
+
+The STMicroelectronics STM32 family of Cortex-A microprocessors (MPUs) and
+Cortex-M microcontrollers (MCUs) are supported by the 'STM32' platform of
+ARM Linux.
+
+Configuration
+-------------
+
+For MCUs, use the provided default configuration:
+        make stm32_defconfig
+For MPUs, use multi_v7 configuration:
+        make multi_v7_defconfig
+
+Layout
+------
+
+All the files for multiple machine families are located in the platform code
+contained in arch/arm/mach-stm32
+
+There is a generic board board-dt.c in the mach folder which support
+Flattened Device Tree, which means, it works with any compatible board with
+Device Trees.
+
+:Authors:
+
+- Maxime Coquelin <mcoquelin.stm32@gmail.com>
+- Ludovic Barre <ludovic.barre@st.com>
+- Gerald Baeza <gerald.baeza@st.com>
diff --git a/Documentation/arm/stm32/overview.txt b/Documentation/arm/stm32/overview.txt
deleted file mode 100644
index a03b0357c017..000000000000
--- a/Documentation/arm/stm32/overview.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-			STM32 ARM Linux Overview
-			========================
-
-Introduction
-------------
-
-  The STMicroelectronics family of Cortex-M based MCUs are supported by the
-  'STM32' platform of ARM Linux. Currently only the STM32F429 (Cortex-M4)
-  and STM32F746 (Cortex-M7) are supported.
-
-
-Configuration
--------------
-
-  A generic configuration is provided for STM32 family, and can be used as the
-  default by
-	make stm32_defconfig
-
-Layout
-------
-
-  All the files for multiple machine families are located in the platform code
-  contained in arch/arm/mach-stm32
-
-  There is a generic board board-dt.c in the mach folder which support
-  Flattened Device Tree, which means, it works with any compatible board with
-  Device Trees.
-
-
-Document Author
----------------
-
-  Maxime Coquelin <mcoquelin.stm32@gmail.com>
diff --git a/Documentation/arm/stm32/stm32f429-overview.rst b/Documentation/arm/stm32/stm32f429-overview.rst
new file mode 100644
index 000000000000..18feda97f483
--- /dev/null
+++ b/Documentation/arm/stm32/stm32f429-overview.rst
@@ -0,0 +1,26 @@
+STM32F429 Overview
+==================
+
+Introduction
+------------
+
+The STM32F429 is a Cortex-M4 MCU aimed at various applications.
+It features:
+
+- ARM Cortex-M4 up to 180MHz with FPU
+- 2MB internal Flash Memory
+- External memory support through FMC controller (PSRAM, SDRAM, NOR, NAND)
+- I2C, SPI, SAI, CAN, USB OTG, Ethernet controllers
+- LCD controller & Camera interface
+- Cryptographic processor
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32F429_).
+
+.. _STM32F429: http://www.st.com/web/en/catalog/mmc/FM141/SC1169/SS1577/LN1806?ecmp=stm32f429-439_pron_pr-ces2014_nov2013
+
+:Authors:
+
+Maxime Coquelin <mcoquelin.stm32@gmail.com>
diff --git a/Documentation/arm/stm32/stm32f429-overview.txt b/Documentation/arm/stm32/stm32f429-overview.txt
deleted file mode 100644
index 5206822bd8ef..000000000000
--- a/Documentation/arm/stm32/stm32f429-overview.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-			STM32F429 Overview
-			==================
-
-  Introduction
-  ------------
-	The STM32F429 is a Cortex-M4 MCU aimed at various applications.
-	It features:
-	- ARM Cortex-M4 up to 180MHz with FPU
-	- 2MB internal Flash Memory
-	- External memory support through FMC controller (PSRAM, SDRAM, NOR, NAND)
-	- I2C, SPI, SAI, CAN, USB OTG, Ethernet controllers
-	- LCD controller & Camera interface
-	- Cryptographic processor
-
-  Resources
-  ---------
-	Datasheet and reference manual are publicly available on ST website:
-	- http://www.st.com/web/en/catalog/mmc/FM141/SC1169/SS1577/LN1806?ecmp=stm32f429-439_pron_pr-ces2014_nov2013
-
-  Document Author
-  ---------------
-	Maxime Coquelin <mcoquelin.stm32@gmail.com>
diff --git a/Documentation/arm/stm32/stm32f746-overview.rst b/Documentation/arm/stm32/stm32f746-overview.rst
new file mode 100644
index 000000000000..b5f4b6ce7656
--- /dev/null
+++ b/Documentation/arm/stm32/stm32f746-overview.rst
@@ -0,0 +1,33 @@
+STM32F746 Overview
+==================
+
+Introduction
+------------
+
+The STM32F746 is a Cortex-M7 MCU aimed at various applications.
+It features:
+
+- Cortex-M7 core running up to @216MHz
+- 1MB internal flash, 320KBytes internal RAM (+4KB of backup SRAM)
+- FMC controller to connect SDRAM, NOR and NAND memories
+- Dual mode QSPI
+- SD/MMC/SDIO support
+- Ethernet controller
+- USB OTFG FS & HS controllers
+- I2C, SPI, CAN busses support
+- Several 16 & 32 bits general purpose timers
+- Serial Audio interface
+- LCD controller
+- HDMI-CEC
+- SPDIFRX
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32F746_).
+
+.. _STM32F746: http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f7-series/stm32f7x6/stm32f746ng.html
+
+:Authors:
+
+Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arm/stm32/stm32f746-overview.txt b/Documentation/arm/stm32/stm32f746-overview.txt
deleted file mode 100644
index cffd2b1ccd6f..000000000000
--- a/Documentation/arm/stm32/stm32f746-overview.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-			STM32F746 Overview
-			==================
-
-  Introduction
-  ------------
-	The STM32F746 is a Cortex-M7 MCU aimed at various applications.
-	It features:
-	- Cortex-M7 core running up to @216MHz
-	- 1MB internal flash, 320KBytes internal RAM (+4KB of backup SRAM)
-	- FMC controller to connect SDRAM, NOR and NAND memories
-	- Dual mode QSPI
-	- SD/MMC/SDIO support
-	- Ethernet controller
-	- USB OTFG FS & HS controllers
-	- I2C, SPI, CAN busses support
-	- Several 16 & 32 bits general purpose timers
-	- Serial Audio interface
-	- LCD controller
-	- HDMI-CEC
-	- SPDIFRX
-
-  Resources
-  ---------
-	Datasheet and reference manual are publicly available on ST website:
-	- http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f7-series/stm32f7x6/stm32f746ng.html
-
-  Document Author
-  ---------------
-	Alexandre Torgue <alexandre.torgue@st.com>
-
-
-
-
-
diff --git a/Documentation/arm/stm32/stm32f769-overview.rst b/Documentation/arm/stm32/stm32f769-overview.rst
new file mode 100644
index 000000000000..228656ced2fe
--- /dev/null
+++ b/Documentation/arm/stm32/stm32f769-overview.rst
@@ -0,0 +1,35 @@
+STM32F769 Overview
+==================
+
+Introduction
+------------
+
+The STM32F769 is a Cortex-M7 MCU aimed at various applications.
+It features:
+
+- Cortex-M7 core running up to @216MHz
+- 2MB internal flash, 512KBytes internal RAM (+4KB of backup SRAM)
+- FMC controller to connect SDRAM, NOR and NAND memories
+- Dual mode QSPI
+- SD/MMC/SDIO support*2
+- Ethernet controller
+- USB OTFG FS & HS controllers
+- I2C*4, SPI*6, CAN*3 busses support
+- Several 16 & 32 bits general purpose timers
+- Serial Audio interface*2
+- LCD controller
+- HDMI-CEC
+- DSI
+- SPDIFRX
+- MDIO salave interface
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32F769_).
+
+.. _STM32F769: http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32-high-performance-mcus/stm32f7-series/stm32f7x9/stm32f769ni.html
+
+:Authors:
+
+Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arm/stm32/stm32h743-overview.rst b/Documentation/arm/stm32/stm32h743-overview.rst
new file mode 100644
index 000000000000..3458dc00095d
--- /dev/null
+++ b/Documentation/arm/stm32/stm32h743-overview.rst
@@ -0,0 +1,34 @@
+STM32H743 Overview
+==================
+
+Introduction
+------------
+
+The STM32H743 is a Cortex-M7 MCU aimed at various applications.
+It features:
+
+- Cortex-M7 core running up to @400MHz
+- 2MB internal flash, 1MBytes internal RAM
+- FMC controller to connect SDRAM, NOR and NAND memories
+- Dual mode QSPI
+- SD/MMC/SDIO support
+- Ethernet controller
+- USB OTFG FS & HS controllers
+- I2C, SPI, CAN busses support
+- Several 16 & 32 bits general purpose timers
+- Serial Audio interface
+- LCD controller
+- HDMI-CEC
+- SPDIFRX
+- DFSDM
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32H743_).
+
+.. _STM32H743: http://www.st.com/en/microcontrollers/stm32h7x3.html?querycriteria=productId=LN2033
+
+:Authors:
+
+Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arm/stm32/stm32h743-overview.txt b/Documentation/arm/stm32/stm32h743-overview.txt
deleted file mode 100644
index 3031cbae31a5..000000000000
--- a/Documentation/arm/stm32/stm32h743-overview.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-			STM32H743 Overview
-			==================
-
-  Introduction
-  ------------
-	The STM32H743 is a Cortex-M7 MCU aimed at various applications.
-	It features:
-	- Cortex-M7 core running up to @400MHz
-	- 2MB internal flash, 1MBytes internal RAM
-	- FMC controller to connect SDRAM, NOR and NAND memories
-	- Dual mode QSPI
-	- SD/MMC/SDIO support
-	- Ethernet controller
-	- USB OTFG FS & HS controllers
-	- I2C, SPI, CAN busses support
-	- Several 16 & 32 bits general purpose timers
-	- Serial Audio interface
-	- LCD controller
-	- HDMI-CEC
-	- SPDIFRX
-	- DFSDM
-
-  Resources
-  ---------
-	Datasheet and reference manual are publicly available on ST website:
-	- http://www.st.com/en/microcontrollers/stm32h7x3.html?querycriteria=productId=LN2033
-
-  Document Author
-  ---------------
-	Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arm/stm32/stm32mp157-overview.rst b/Documentation/arm/stm32/stm32mp157-overview.rst
new file mode 100644
index 000000000000..62e176d47ca7
--- /dev/null
+++ b/Documentation/arm/stm32/stm32mp157-overview.rst
@@ -0,0 +1,19 @@
+STM32MP157 Overview
+===================
+
+Introduction
+------------
+
+The STM32MP157 is a Cortex-A MPU aimed at various applications.
+It features:
+
+- Dual core Cortex-A7 application core
+- 2D/3D image composition with GPU
+- Standard memories interface support
+- Standard connectivity, widely inherited from the STM32 MCU family
+- Comprehensive security support
+
+:Authors:
+
+- Ludovic Barre <ludovic.barre@st.com>
+- Gerald Baeza <gerald.baeza@st.com>
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 8b0328ff951d..29e1dc5d506d 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -199,6 +199,7 @@ described below.
 			    "actions,s500-smp"
 			    "allwinner,sun6i-a31"
 			    "allwinner,sun8i-a23"
+			    "allwinner,sun9i-a80-smp"
 			    "amlogic,meson8-smp"
 			    "amlogic,meson8b-smp"
 			    "arm,realview-smp"
diff --git a/Documentation/devicetree/bindings/arm/omap/mpu.txt b/Documentation/devicetree/bindings/arm/omap/mpu.txt
index 763695db2bd9..f301e636fd52 100644
--- a/Documentation/devicetree/bindings/arm/omap/mpu.txt
+++ b/Documentation/devicetree/bindings/arm/omap/mpu.txt
@@ -13,6 +13,13 @@ Required properties:
 Optional properties:
 - sram:	Phandle to the ocmcram node
 
+am335x and am437x only:
+- pm-sram: Phandles to ocmcram nodes to be used for power management.
+	   First should be type 'protect-exec' for the driver to use to copy
+	   and run PM functions, second should be regular pool to be used for
+	   data region for code. See Documentation/devicetree/bindings/sram/sram.txt
+	   for more details.
+
 Examples:
 
 - For an OMAP5 SMP system:
@@ -36,3 +43,12 @@ mpu {
     compatible = "ti,omap3-mpu";
     ti,hwmods = "mpu";
 };
+
+- For an AM335x system:
+
+mpu {
+	compatible = "ti,omap3-mpu";
+	ti,hwmods = "mpu";
+	pm-sram = <&pm_sram_code
+		   &pm_sram_data>;
+};
diff --git a/Documentation/devicetree/bindings/arm/sunxi/smp-sram.txt b/Documentation/devicetree/bindings/arm/sunxi/smp-sram.txt
new file mode 100644
index 000000000000..082e6a9382d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sunxi/smp-sram.txt
@@ -0,0 +1,44 @@
+Allwinner SRAM for smp bringup:
+------------------------------------------------
+
+Allwinner's A80 SoC uses part of the secure sram for hotplugging of the
+primary core (cpu0). Once the core gets powered up it checks if a magic
+value is set at a specific location. If it is then the BROM will jump
+to the software entry address, instead of executing a standard boot.
+
+Therefore a reserved section sub-node has to be added to the mmio-sram
+declaration.
+
+Note that this is separate from the Allwinner SRAM controller found in
+../../sram/sunxi-sram.txt. This SRAM is secure only and not mappable to
+any device.
+
+Also there are no "secure-only" properties. The implementation should
+check if this SRAM is usable first.
+
+Required sub-node properties:
+- compatible : depending on the SoC this should be one of:
+		"allwinner,sun9i-a80-smp-sram"
+
+The rest of the properties should follow the generic mmio-sram discription
+found in ../../misc/sram.txt
+
+Example:
+
+	sram_b: sram@20000 {
+		/* 256 KiB secure SRAM at 0x20000 */
+		compatible = "mmio-sram";
+		reg = <0x00020000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00020000 0x40000>;
+
+		smp-sram@1000 {
+			/*
+			 * This is checked by BROM to determine if
+			 * cpu0 should jump to SMP entry vector
+			 */
+			compatible = "allwinner,sun9i-a80-smp-sram";
+			reg = <0x1000 0x8>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
deleted file mode 100644
index d4ee4da58463..000000000000
--- a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-PXA3xx NAND DT bindings
-
-Required properties:
-
- - compatible:		Should be set to one of the following:
-			marvell,pxa3xx-nand
-			marvell,armada370-nand
-			marvell,armada-8k-nand
- - reg: 		The register base for the controller
- - interrupts:		The interrupt to map
- - #address-cells:	Set to <1> if the node includes partitions
- - marvell,system-controller: Set to retrieve the syscon node that handles
-			NAND controller related registers (only required
-			with marvell,armada-8k-nand compatible).
-
-Optional properties:
-
- - dmas:			dma data channel, see dma.txt binding doc
- - marvell,nand-enable-arbiter:	Set to enable the bus arbiter
- - marvell,nand-keep-config:	Set to keep the NAND controller config as set
-				by the bootloader
- - num-cs:			Number of chipselect lines to use
- - nand-on-flash-bbt: 		boolean to enable on flash bbt option if
-				not present false
- - nand-ecc-strength:           number of bits to correct per ECC step
- - nand-ecc-step-size:          number of data bytes covered by a single ECC step
-
-The following ECC strength and step size are currently supported:
-
- - nand-ecc-strength = <1>, nand-ecc-step-size = <512>
- - nand-ecc-strength = <4>, nand-ecc-step-size = <512>
- - nand-ecc-strength = <8>, nand-ecc-step-size = <512>
-
-Example:
-
-	nand0: nand@43100000 {
-		compatible = "marvell,pxa3xx-nand";
-		reg = <0x43100000 90>;
-		interrupts = <45>;
-		dmas = <&pdma 97 0>;
-		dma-names = "data";
-		#address-cells = <1>;
-
-		marvell,nand-enable-arbiter;
-		marvell,nand-keep-config;
-		num-cs = <1>;
-
-		/* partitions (optional) */
-	};
-
diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
index 8690f10426a3..ab399e559257 100644
--- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
+++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
@@ -17,7 +17,9 @@ Required properties:
       - "renesas,r8a7794-sysc" (R-Car E2)
       - "renesas,r8a7795-sysc" (R-Car H3)
       - "renesas,r8a7796-sysc" (R-Car M3-W)
+      - "renesas,r8a77965-sysc" (R-Car M3-N)
       - "renesas,r8a77970-sysc" (R-Car V3M)
+      - "renesas,r8a77980-sysc" (R-Car V3H)
       - "renesas,r8a77995-sysc" (R-Car D3)
   - reg: Address start and address range for the device.
   - #power-domain-cells: Must be 1.
diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.txt b/Documentation/devicetree/bindings/reset/renesas,rst.txt
index a8014f3ab8ba..294a0dae106a 100644
--- a/Documentation/devicetree/bindings/reset/renesas,rst.txt
+++ b/Documentation/devicetree/bindings/reset/renesas,rst.txt
@@ -26,7 +26,9 @@ Required properties:
 		  - "renesas,r8a7794-rst" (R-Car E2)
 		  - "renesas,r8a7795-rst" (R-Car H3)
 		  - "renesas,r8a7796-rst" (R-Car M3-W)
+		  - "renesas,r8a77965-rst" (R-Car M3-N)
 		  - "renesas,r8a77970-rst" (R-Car V3M)
+		  - "renesas,r8a77980-rst" (R-Car V3H)
 		  - "renesas,r8a77995-rst" (R-Car D3)
   - reg: Address start and address range for the device.
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 8fa200fddd16..2f983928d74c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1242,27 +1242,6 @@ M:	Boris Brezillon <boris.brezillon@free-electrons.com>
 S:	Maintained
 F:	drivers/clk/at91
 
-ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
-M:	Nicolas Ferre <nicolas.ferre@microchip.com>
-M:	Alexandre Belloni <alexandre.belloni@bootlin.com>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.linux4sam.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git
-S:	Supported
-N:	at91
-N:	atmel
-F:	arch/arm/mach-at91/
-F:	include/soc/at91/
-F:	arch/arm/boot/dts/at91*.dts
-F:	arch/arm/boot/dts/at91*.dtsi
-F:	arch/arm/boot/dts/sama*.dts
-F:	arch/arm/boot/dts/sama*.dtsi
-F:	arch/arm/include/debug/at91.S
-F:	drivers/memory/atmel*
-F:	drivers/watchdog/sama5d4_wdt.c
-X:	drivers/input/touchscreen/atmel_mxt_ts.c
-X:	drivers/net/wireless/atmel/
-
 ARM/CALXEDA HIGHBANK ARCHITECTURE
 M:	Rob Herring <robh@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1583,15 +1562,6 @@ ARM/MAGICIAN MACHINE SUPPORT
 M:	Philipp Zabel <philipp.zabel@gmail.com>
 S:	Maintained
 
-ARM/Marvell Berlin SoC support
-M:	Jisheng Zhang <jszhang@marvell.com>
-M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
-F:	arch/arm/mach-berlin/
-F:	arch/arm/boot/dts/berlin*
-F:	arch/arm64/boot/dts/marvell/berlin*
-
 ARM/Marvell Dove/MV78xx0/Orion SOC support
 M:	Jason Cooper <jason@lakedaemon.net>
 M:	Andrew Lunn <andrew@lunn.ch>
@@ -1662,6 +1632,27 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 F:	arch/arm/mach-ks8695/
 S:	Odd Fixes
 
+ARM/Microchip (AT91) SoC support
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
+M:	Alexandre Belloni <alexandre.belloni@bootlin.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+W:	http://www.linux4sam.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git
+S:	Supported
+N:	at91
+N:	atmel
+F:	arch/arm/mach-at91/
+F:	include/soc/at91/
+F:	arch/arm/boot/dts/at91*.dts
+F:	arch/arm/boot/dts/at91*.dtsi
+F:	arch/arm/boot/dts/sama*.dts
+F:	arch/arm/boot/dts/sama*.dtsi
+F:	arch/arm/include/debug/at91.S
+F:	drivers/memory/atmel*
+F:	drivers/watchdog/sama5d4_wdt.c
+X:	drivers/input/touchscreen/atmel_mxt_ts.c
+X:	drivers/net/wireless/atmel/
+
 ARM/MIOA701 MACHINE SUPPORT
 M:	Robert Jarzmik <robert.jarzmik@free.fr>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1706,6 +1697,20 @@ F:	Documentation/devicetree/bindings/arm/ste-*
 F:	Documentation/devicetree/bindings/arm/ux500/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik.git
 
+ARM/NUVOTON NPCM ARCHITECTURE
+M:	Avi Fishman <avifishman70@gmail.com>
+M:	Tomer Maimon <tmaimon77@gmail.com>
+R:	Patrick Venture <venture@google.com>
+R:	Nancy Yuen <yuenn@google.com>
+R:	Brendan Higgins <brendanhiggins@google.com>
+L:	openbmc@lists.ozlabs.org (moderated for non-subscribers)
+S:	Supported
+F:	arch/arm/mach-npcm/
+F:	arch/arm/boot/dts/nuvoton-npcm*
+F:	include/dt-bindings/clock/nuvoton,npcm7xx-clks.h
+F:	drivers/*/*npcm*
+F:	Documentation/*/*npcm*
+
 ARM/NUVOTON W90X900 ARM ARCHITECTURE
 M:	Wan ZongShun <mcuos.com@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1968,6 +1973,14 @@ M:	Thor Thayer <thor.thayer@linux.intel.com>
 S:	Maintained
 F:	drivers/edac/altera_edac.
 
+ARM/SPREADTRUM SoC SUPPORT
+M:	Orson Zhai <orsonzhai@gmail.com>
+M:	Baolin Wang <baolin.wang@linaro.org>
+M:	Chunyan Zhang <zhang.lyra@gmail.com>
+S:	Maintained
+F:	arch/arm64/boot/dts/sprd
+N:	sprd
+
 ARM/STI ARCHITECTURE
 M:	Patrice Chotard <patrice.chotard@st.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2010,6 +2023,15 @@ F:	arch/arm/boot/dts/stm32*
 F:	arch/arm/mach-stm32/
 F:	drivers/clocksource/armv7m_systick.c
 
+ARM/Synaptics Berlin SoC support
+M:	Jisheng Zhang <Jisheng.Zhang@synaptics.com>
+M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-berlin/
+F:	arch/arm/boot/dts/berlin*
+F:	arch/arm64/boot/dts/marvell/berlin*
+
 ARM/TANGO ARCHITECTURE
 M:	Marc Gonzalez <marc.w.gonzalez@free.fr>
 M:	Mans Rullgard <mans@mansr.com>
@@ -11416,12 +11438,6 @@ F:	include/sound/pxa2xx-lib.h
 F:	sound/arm/pxa*
 F:	sound/soc/pxa/
 
-PXA3xx NAND FLASH DRIVER
-M:	Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
-L:	linux-mtd@lists.infradead.org
-S:	Maintained
-F:	drivers/mtd/nand/pxa3xx_nand.c
-
 QAT DRIVER
 M:	Giovanni Cabiddu <giovanni.cabiddu@intel.com>
 L:	qat-linux@intel.com
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7e3d53575486..1878083771af 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -709,8 +709,6 @@ config ARCH_VIRT
 # Kconfigs may be included either alphabetically (according to the
 # plat- suffix) or along side the corresponding mach-* source.
 #
-source "arch/arm/mach-mvebu/Kconfig"
-
 source "arch/arm/mach-actions/Kconfig"
 
 source "arch/arm/mach-alpine/Kconfig"
@@ -719,6 +717,8 @@ source "arch/arm/mach-artpec/Kconfig"
 
 source "arch/arm/mach-asm9260/Kconfig"
 
+source "arch/arm/mach-aspeed/Kconfig"
+
 source "arch/arm/mach-at91/Kconfig"
 
 source "arch/arm/mach-axxia/Kconfig"
@@ -739,6 +739,9 @@ source "arch/arm/mach-dove/Kconfig"
 
 source "arch/arm/mach-ep93xx/Kconfig"
 
+source "arch/arm/mach-exynos/Kconfig"
+source "arch/arm/plat-samsung/Kconfig"
+
 source "arch/arm/mach-footbridge/Kconfig"
 
 source "arch/arm/mach-gemini/Kconfig"
@@ -747,31 +750,33 @@ source "arch/arm/mach-highbank/Kconfig"
 
 source "arch/arm/mach-hisi/Kconfig"
 
+source "arch/arm/mach-imx/Kconfig"
+
 source "arch/arm/mach-integrator/Kconfig"
 
+source "arch/arm/mach-iop13xx/Kconfig"
+
 source "arch/arm/mach-iop32x/Kconfig"
 
 source "arch/arm/mach-iop33x/Kconfig"
 
-source "arch/arm/mach-iop13xx/Kconfig"
-
 source "arch/arm/mach-ixp4xx/Kconfig"
 
 source "arch/arm/mach-keystone/Kconfig"
 
 source "arch/arm/mach-ks8695/Kconfig"
 
+source "arch/arm/mach-mediatek/Kconfig"
+
 source "arch/arm/mach-meson/Kconfig"
 
-source "arch/arm/mach-moxart/Kconfig"
+source "arch/arm/mach-mmp/Kconfig"
 
-source "arch/arm/mach-aspeed/Kconfig"
+source "arch/arm/mach-moxart/Kconfig"
 
 source "arch/arm/mach-mv78xx0/Kconfig"
 
-source "arch/arm/mach-imx/Kconfig"
-
-source "arch/arm/mach-mediatek/Kconfig"
+source "arch/arm/mach-mvebu/Kconfig"
 
 source "arch/arm/mach-mxs/Kconfig"
 
@@ -779,6 +784,8 @@ source "arch/arm/mach-netx/Kconfig"
 
 source "arch/arm/mach-nomadik/Kconfig"
 
+source "arch/arm/mach-npcm/Kconfig"
+
 source "arch/arm/mach-nspire/Kconfig"
 
 source "arch/arm/plat-omap/Kconfig"
@@ -789,23 +796,31 @@ source "arch/arm/mach-omap2/Kconfig"
 
 source "arch/arm/mach-orion5x/Kconfig"
 
+source "arch/arm/mach-oxnas/Kconfig"
+
 source "arch/arm/mach-picoxcell/Kconfig"
 
+source "arch/arm/mach-prima2/Kconfig"
+
 source "arch/arm/mach-pxa/Kconfig"
 source "arch/arm/plat-pxa/Kconfig"
 
-source "arch/arm/mach-mmp/Kconfig"
-
-source "arch/arm/mach-oxnas/Kconfig"
-
 source "arch/arm/mach-qcom/Kconfig"
 
 source "arch/arm/mach-realview/Kconfig"
 
 source "arch/arm/mach-rockchip/Kconfig"
 
+source "arch/arm/mach-s3c24xx/Kconfig"
+
+source "arch/arm/mach-s3c64xx/Kconfig"
+
+source "arch/arm/mach-s5pv210/Kconfig"
+
 source "arch/arm/mach-sa1100/Kconfig"
 
+source "arch/arm/mach-shmobile/Kconfig"
+
 source "arch/arm/mach-socfpga/Kconfig"
 
 source "arch/arm/mach-spear/Kconfig"
@@ -814,21 +829,8 @@ source "arch/arm/mach-sti/Kconfig"
 
 source "arch/arm/mach-stm32/Kconfig"
 
-source "arch/arm/mach-s3c24xx/Kconfig"
-
-source "arch/arm/mach-s3c64xx/Kconfig"
-
-source "arch/arm/mach-s5pv210/Kconfig"
-
-source "arch/arm/mach-exynos/Kconfig"
-source "arch/arm/plat-samsung/Kconfig"
-
-source "arch/arm/mach-shmobile/Kconfig"
-
 source "arch/arm/mach-sunxi/Kconfig"
 
-source "arch/arm/mach-prima2/Kconfig"
-
 source "arch/arm/mach-tango/Kconfig"
 
 source "arch/arm/mach-tegra/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index e83f5161fdd8..e4e537f27339 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -196,6 +196,7 @@ machine-$(CONFIG_ARCH_MEDIATEK)		+= mediatek
 machine-$(CONFIG_ARCH_MXS)		+= mxs
 machine-$(CONFIG_ARCH_NETX)		+= netx
 machine-$(CONFIG_ARCH_NOMADIK)		+= nomadik
+machine-$(CONFIG_ARCH_NPCM)		+= npcm
 machine-$(CONFIG_ARCH_NSPIRE)		+= nspire
 machine-$(CONFIG_ARCH_OXNAS)		+= oxnas
 machine-$(CONFIG_ARCH_OMAP1)		+= omap1
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
index 55c75b67351c..982d1a62661d 100644
--- a/arch/arm/boot/dts/pxa3xx.dtsi
+++ b/arch/arm/boot/dts/pxa3xx.dtsi
@@ -117,15 +117,15 @@
 			status = "disabled";
 		};
 
-		nand0: nand@43100000 {
-			compatible = "marvell,pxa3xx-nand";
+		nand_controller: nand-controller@43100000 {
+			compatible = "marvell,pxa3xx-nand-controller";
 			reg = <0x43100000 90>;
 			interrupts = <45>;
 			clocks = <&clks CLK_NAND>;
 			dmas = <&pdma 97 3>;
 			dma-names = "data";
 			#address-cells = <1>;
-			#size-cells = <1>;	
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 43dab4890ad3..8682b15336b9 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -49,6 +49,9 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
+CONFIG_BT=y
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_BCM=y
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
 CONFIG_DEVTMPFS=y
@@ -74,6 +77,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_BCM2835AUX=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
 CONFIG_TTY_PRINTK=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_BCM2835=y
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
index c0418e03d180..5e349c625b71 100644
--- a/arch/arm/configs/cm_x300_defconfig
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -49,7 +49,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_PXA3xx=y
+CONFIG_MTD_NAND_MARVELL=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index 026154c1d55a..c302a04e8cbc 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -126,9 +126,10 @@ CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO=y
+CONFIG_SYSCON_REBOOT_MODE=m
 CONFIG_BATTERY_LEGO_EV3=m
 CONFIG_WATCHDOG=y
-CONFIG_DAVINCI_WATCHDOG=m
+CONFIG_DAVINCI_WATCHDOG=y
 CONFIG_MFD_DM355EVM_MSP=y
 CONFIG_TPS6507X=y
 CONFIG_REGULATOR=y
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index ca0f13cafe38..054591dc9a00 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -1,7 +1,6 @@
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -78,7 +77,6 @@ CONFIG_SMC91X=y
 CONFIG_SMC911X=y
 CONFIG_SMSC911X=y
 CONFIG_SMSC_PHY=y
-# CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_IMX=y
@@ -105,8 +103,8 @@ CONFIG_HWMON=m
 CONFIG_SENSORS_MC13783_ADC=m
 CONFIG_WATCHDOG=y
 CONFIG_IMX2_WDT=y
-CONFIG_MFD_MX25_TSADC=y
 CONFIG_MFD_MC13XXX_SPI=y
+CONFIG_MFD_MX25_TSADC=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
@@ -116,10 +114,8 @@ CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_SOC_CAMERA=y
-CONFIG_VIDEO_MX2=y
 CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_CODA=y
-CONFIG_SOC_CAMERA_OV2640=y
 CONFIG_FB=y
 CONFIG_FB_IMX=y
 CONFIG_LCD_L4F00242T03=y
@@ -134,8 +130,9 @@ CONFIG_SND_IMX_SOC=y
 CONFIG_SND_SOC_MX27VIS_AIC32X4=y
 CONFIG_SND_SOC_PHYCORE_AC97=y
 CONFIG_SND_SOC_EUKREA_TLV320=y
-CONFIG_SND_SOC_IMX_SGTL5000=y
 CONFIG_SND_SOC_IMX_MC13783=y
+CONFIG_SND_SOC_FSL_ASOC_CARD=y
+CONFIG_SND_SOC_SGTL5000=y
 CONFIG_USB_HID=m
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 4cb9829fccd1..3a308437b088 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -48,9 +48,7 @@ CONFIG_PCI_IMX6=y
 CONFIG_SMP=y
 CONFIG_ARM_PSCI=y
 CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
-CONFIG_CMA=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
 CONFIG_KEXEC=y
@@ -60,6 +58,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPUFREQ_DT=y
 CONFIG_ARM_IMX6Q_CPUFREQ=y
 CONFIG_CPU_IDLE=y
 CONFIG_VFP=y
@@ -81,7 +80,6 @@ CONFIG_CAN=y
 CONFIG_CAN_FLEXCAN=y
 CONFIG_BT=y
 CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_SERDEV=y
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_LL=y
 CONFIG_CFG80211=y
@@ -92,7 +90,6 @@ CONFIG_RFKILL_INPUT=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
-CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_IMX_WEIM=y
 CONFIG_CONNECTOR=y
@@ -170,9 +167,9 @@ CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
 CONFIG_TOUCHSCREEN_EGALAX=y
+CONFIG_TOUCHSCREEN_MAX11801=y
 CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
 CONFIG_TOUCHSCREEN_EDT_FT5X06=y
-CONFIG_TOUCHSCREEN_MAX11801=y
 CONFIG_TOUCHSCREEN_MC13783=y
 CONFIG_TOUCHSCREEN_TSC2004=y
 CONFIG_TOUCHSCREEN_TSC2007=y
@@ -181,7 +178,6 @@ CONFIG_TOUCHSCREEN_SX8654=y
 CONFIG_TOUCHSCREEN_COLIBRI_VF50=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_MMA8450=y
-CONFIG_HID_MULTITOUCH=y
 CONFIG_SERIO_SERPORT=m
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_IMX=y
@@ -189,7 +185,6 @@ CONFIG_SERIAL_IMX_CONSOLE=y
 CONFIG_SERIAL_FSL_LPUART=y
 CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
 CONFIG_SERIAL_DEV_BUS=y
-CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MUX=y
@@ -209,19 +204,19 @@ CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_74X164=y
 CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_IMX=y
 CONFIG_POWER_RESET_SYSCON=y
 CONFIG_POWER_RESET_SYSCON_POWEROFF=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_SENSORS_GPIO_FAN=y
 CONFIG_SENSORS_IIO_HWMON=y
-CONFIG_THERMAL=y
 CONFIG_THERMAL_WRITABLE_TRIPS=y
 CONFIG_CPU_THERMAL=y
 CONFIG_IMX_THERMAL=y
 CONFIG_WATCHDOG=y
+CONFIG_DA9062_WATCHDOG=y
 CONFIG_IMX2_WDT=y
 CONFIG_MFD_DA9052_I2C=y
+CONFIG_MFD_DA9062=y
 CONFIG_MFD_MC13XXX_SPI=y
 CONFIG_MFD_MC13XXX_I2C=y
 CONFIG_MFD_STMPE=y
@@ -229,17 +224,18 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_ANATOP=y
 CONFIG_REGULATOR_DA9052=y
+CONFIG_REGULATOR_DA9062=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
 CONFIG_REGULATOR_PFUZE100=y
+CONFIG_RC_CORE=y
+CONFIG_RC_DEVICES=y
+CONFIG_IR_GPIO_CIR=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_RC_CORE=y
 CONFIG_MEDIA_CONTROLLER=y
 CONFIG_VIDEO_V4L2_SUBDEV_API=y
-CONFIG_RC_DEVICES=y
-CONFIG_IR_GPIO_CIR=y
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
@@ -250,7 +246,6 @@ CONFIG_VIDEO_CODA=m
 # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
 CONFIG_VIDEO_ADV7180=m
 CONFIG_VIDEO_OV5640=m
-CONFIG_SOC_CAMERA_OV2640=y
 CONFIG_IMX_IPUV3_CORE=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_LVDS=y
@@ -285,10 +280,13 @@ CONFIG_SND_SOC_IMX_SGTL5000=y
 CONFIG_SND_SOC_IMX_SPDIF=y
 CONFIG_SND_SOC_IMX_MC13783=y
 CONFIG_SND_SOC_FSL_ASOC_CARD=y
+CONFIG_SND_SOC_AC97_CODEC=y
 CONFIG_SND_SOC_CS42XX8_I2C=y
 CONFIG_SND_SOC_TLV320AIC3X=y
 CONFIG_SND_SOC_WM8960=y
+CONFIG_SND_SOC_WM8962=y
 CONFIG_SND_SIMPLE_CARD=y
+CONFIG_HID_MULTITOUCH=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
@@ -354,6 +352,7 @@ CONFIG_RTC_DRV_ISL1208=y
 CONFIG_RTC_DRV_PCF8523=y
 CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_M41T80=y
+CONFIG_RTC_DRV_DA9063=y
 CONFIG_RTC_DRV_MC13XXX=y
 CONFIG_RTC_DRV_MXC=y
 CONFIG_RTC_DRV_MXC_V2=y
@@ -369,11 +368,14 @@ CONFIG_COMMON_CLK_PWM=y
 CONFIG_IIO=y
 CONFIG_IMX7D_ADC=y
 CONFIG_VF610_ADC=y
+CONFIG_MAG3110=y
 CONFIG_MPL3115=y
 CONFIG_PWM=y
 CONFIG_PWM_FSL_FTM=y
 CONFIG_PWM_IMX=y
 CONFIG_NVMEM_IMX_OCOTP=y
+CONFIG_TEE=y
+CONFIG_OPTEE=y
 CONFIG_MUX_MMIO=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 28f1d714e5b9..e6b3c96d4c09 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -80,6 +80,7 @@ CONFIG_ARCH_SPEAR13XX=y
 CONFIG_MACH_SPEAR1310=y
 CONFIG_MACH_SPEAR1340=y
 CONFIG_ARCH_STI=y
+CONFIG_ARCH_STM32=y
 CONFIG_ARCH_EXYNOS=y
 CONFIG_EXYNOS5420_MCPM=y
 CONFIG_ARCH_RENESAS=y
@@ -174,6 +175,7 @@ CONFIG_CAN_RAW=y
 CONFIG_CAN_BCM=y
 CONFIG_CAN_DEV=y
 CONFIG_CAN_AT91=m
+CONFIG_CAN_FLEXCAN=m
 CONFIG_CAN_RCAR=m
 CONFIG_CAN_XILINXCAN=y
 CONFIG_CAN_MCP251X=y
@@ -208,6 +210,7 @@ CONFIG_MTD_NAND_DENALI_DT=y
 CONFIG_MTD_NAND_OMAP2=y
 CONFIG_MTD_NAND_OMAP_BCH=y
 CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_GPMI_NAND=y
 CONFIG_MTD_NAND_BRCMNAND=y
 CONFIG_MTD_NAND_VF610_NFC=y
 CONFIG_MTD_NAND_DAVINCI=y
@@ -307,11 +310,15 @@ CONFIG_TOUCHSCREEN_WM97XX=m
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_MAX77693_HAPTIC=m
 CONFIG_INPUT_MAX8997_HAPTIC=m
+CONFIG_INPUT_CPCAP_PWRBUTTON=m
 CONFIG_INPUT_AXP20X_PEK=m
 CONFIG_INPUT_ADXL34X=m
 CONFIG_SERIO_AMBAKMI=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_BCM2835AUX=y
 CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_8250_EM=y
 CONFIG_SERIAL_8250_MT6577=y
@@ -351,6 +358,8 @@ CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
 CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y
 CONFIG_SERIAL_ST_ASC=y
 CONFIG_SERIAL_ST_ASC_CONSOLE=y
+CONFIG_SERIAL_STM32=y
+CONFIG_SERIAL_STM32_CONSOLE=y
 CONFIG_HVC_DRIVER=y
 CONFIG_VIRTIO_CONSOLE=y
 CONFIG_I2C_CHARDEV=y
@@ -368,7 +377,7 @@ CONFIG_I2C_DIGICOLOR=m
 CONFIG_I2C_EMEV2=m
 CONFIG_I2C_GPIO=m
 CONFIG_I2C_EXYNOS5=y
-CONFIG_I2C_IMX=m
+CONFIG_I2C_IMX=y
 CONFIG_I2C_MV64XXX=y
 CONFIG_I2C_RIIC=y
 CONFIG_I2C_RK3X=y
@@ -438,9 +447,11 @@ CONFIG_GPIO_SYSCON=y
 CONFIG_GPIO_TPS6586X=y
 CONFIG_GPIO_TPS65910=y
 CONFIG_BATTERY_ACT8945A=y
+CONFIG_BATTERY_CPCAP=m
 CONFIG_BATTERY_SBS=y
 CONFIG_BATTERY_MAX17040=m
 CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_CPCAP=m
 CONFIG_CHARGER_MAX14577=m
 CONFIG_CHARGER_MAX77693=m
 CONFIG_CHARGER_MAX8997=m
@@ -462,7 +473,9 @@ CONFIG_SENSORS_NTC_THERMISTOR=m
 CONFIG_SENSORS_PWM_FAN=m
 CONFIG_SENSORS_INA2XX=m
 CONFIG_CPU_THERMAL=y
+CONFIG_BCM2835_THERMAL=m
 CONFIG_BRCMSTB_THERMAL=m
+CONFIG_IMX_THERMAL=y
 CONFIG_ROCKCHIP_THERMAL=y
 CONFIG_RCAR_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
@@ -476,6 +489,7 @@ CONFIG_ARM_SP805_WATCHDOG=y
 CONFIG_AT91SAM9X_WATCHDOG=y
 CONFIG_SAMA5D4_WATCHDOG=y
 CONFIG_ORION_WATCHDOG=y
+CONFIG_RN5T618_WATCHDOG=y
 CONFIG_ST_LPC_WATCHDOG=y
 CONFIG_SUNXI_WATCHDOG=y
 CONFIG_IMX2_WDT=y
@@ -508,9 +522,11 @@ CONFIG_MFD_MAX8907=y
 CONFIG_MFD_MAX8997=y
 CONFIG_MFD_MAX8998=y
 CONFIG_MFD_RK808=y
+CONFIG_MFD_CPCAP=y
 CONFIG_MFD_PM8XXX=y
 CONFIG_MFD_QCOM_RPM=y
 CONFIG_MFD_SPMI_PMIC=y
+CONFIG_MFD_RN5T618=y
 CONFIG_MFD_SEC_CORE=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_PALMAS=y
@@ -527,6 +543,7 @@ CONFIG_REGULATOR_AS3711=y
 CONFIG_REGULATOR_AS3722=y
 CONFIG_REGULATOR_AXP20X=y
 CONFIG_REGULATOR_BCM590XX=y
+CONFIG_REGULATOR_CPCAP=y
 CONFIG_REGULATOR_DA9210=y
 CONFIG_REGULATOR_FAN53555=y
 CONFIG_REGULATOR_RK808=y
@@ -547,6 +564,7 @@ CONFIG_REGULATOR_PBIAS=y
 CONFIG_REGULATOR_PWM=y
 CONFIG_REGULATOR_QCOM_RPM=y
 CONFIG_REGULATOR_QCOM_SMD_RPM=y
+CONFIG_REGULATOR_RN5T618=y
 CONFIG_REGULATOR_S2MPS11=y
 CONFIG_REGULATOR_S5M8767=y
 CONFIG_REGULATOR_TI_ABB=y
@@ -617,6 +635,7 @@ CONFIG_DRM_ATMEL_HLCDC=m
 CONFIG_DRM_RCAR_DU=m
 CONFIG_DRM_RCAR_LVDS=y
 CONFIG_DRM_SUN4I=m
+CONFIG_DRM_FSL_DCU=m
 CONFIG_DRM_TEGRA=y
 CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
 CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
@@ -624,6 +643,8 @@ CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_SII9234=m
 CONFIG_DRM_STI=m
 CONFIG_DRM_VC4=y
+CONFIG_DRM_ETNAVIV=m
+CONFIG_DRM_MXSFB=m
 CONFIG_FB_ARMCLCD=y
 CONFIG_FB_EFI=y
 CONFIG_FB_WM8505=y
@@ -674,6 +695,7 @@ CONFIG_SND_SOC_TEGRA_WM8903=m
 CONFIG_SND_SOC_TEGRA_WM9712=m
 CONFIG_SND_SOC_TEGRA_TRIMSLICE=m
 CONFIG_SND_SOC_TEGRA_ALC5632=m
+CONFIG_SND_SOC_CPCAP=m
 CONFIG_SND_SOC_TEGRA_MAX98090=m
 CONFIG_SND_SOC_AK4642=m
 CONFIG_SND_SOC_SGTL5000=m
@@ -683,6 +705,7 @@ CONFIG_SND_SOC_STI=m
 CONFIG_SND_SOC_STI_SAS=m
 CONFIG_SND_SIMPLE_CARD=m
 CONFIG_USB=y
+CONFIG_USB_OTG=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_MVEBU=y
 CONFIG_USB_XHCI_RCAR=m
@@ -704,6 +727,15 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_UAS=m
 CONFIG_USB_MUSB_HDRC=m
 CONFIG_USB_MUSB_SUNXI=m
+CONFIG_USB_MUSB_TUSB6010=m
+CONFIG_USB_MUSB_OMAP2PLUS=m
+CONFIG_USB_MUSB_AM35X=m
+CONFIG_USB_MUSB_DSPS=m
+CONFIG_USB_MUSB_UX500=m
+CONFIG_USB_UX500_DMA=y
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_USB_TI_CPPI41_DMA=y
+CONFIG_USB_TUSB_OMAP_DMA=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC2=y
 CONFIG_USB_HSIC_USB3503=y
@@ -712,6 +744,9 @@ CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
 CONFIG_AB8500_USB=y
 CONFIG_KEYSTONE_USB_PHY=y
+CONFIG_NOP_USB_XCEIV=m
+CONFIG_AM335X_PHY_USB=m
+CONFIG_TWL6030_USB=m
 CONFIG_USB_GPIO_VBUS=y
 CONFIG_USB_ISP1301=y
 CONFIG_USB_MSM_OTG=m
@@ -719,6 +754,25 @@ CONFIG_USB_MXS_PHY=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_FSL_USB2=y
 CONFIG_USB_RENESAS_USBHS_UDC=m
+CONFIG_USB_CONFIGFS=m
+CONFIG_USB_CONFIGFS_SERIAL=y
+CONFIG_USB_CONFIGFS_ACM=y
+CONFIG_USB_CONFIGFS_OBEX=y
+CONFIG_USB_CONFIGFS_NCM=y
+CONFIG_USB_CONFIGFS_ECM=y
+CONFIG_USB_CONFIGFS_ECM_SUBSET=y
+CONFIG_USB_CONFIGFS_RNDIS=y
+CONFIG_USB_CONFIGFS_EEM=y
+CONFIG_USB_CONFIGFS_MASS_STORAGE=y
+CONFIG_USB_CONFIGFS_F_LB_SS=y
+CONFIG_USB_CONFIGFS_F_FS=y
+CONFIG_USB_CONFIGFS_F_UAC1=y
+CONFIG_USB_CONFIGFS_F_UAC1_LEGACY=y
+CONFIG_USB_CONFIGFS_F_UAC2=y
+CONFIG_USB_CONFIGFS_F_MIDI=y
+CONFIG_USB_CONFIGFS_F_HID=y
+CONFIG_USB_CONFIGFS_F_UVC=y
+CONFIG_USB_CONFIGFS_F_PRINTER=y
 CONFIG_USB_ETH=m
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=16
@@ -755,6 +809,7 @@ CONFIG_MMC_SDHCI_OMAP=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_CLASS_FLASH=m
+CONFIG_LEDS_CPCAP=m
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
 CONFIG_LEDS_MAX77693=m
@@ -805,6 +860,7 @@ CONFIG_RTC_DRV_SUN6I=y
 CONFIG_RTC_DRV_SUNXI=y
 CONFIG_RTC_DRV_MV=y
 CONFIG_RTC_DRV_TEGRA=y
+CONFIG_RTC_DRV_CPCAP=m
 CONFIG_DMADEVICES=y
 CONFIG_DW_DMAC=y
 CONFIG_AT_HDMAC=y
@@ -877,6 +933,7 @@ CONFIG_IIO_SW_TRIGGER=y
 CONFIG_AT91_ADC=m
 CONFIG_AT91_SAMA5D2_ADC=m
 CONFIG_BERLIN2_ADC=m
+CONFIG_CPCAP_ADC=m
 CONFIG_EXYNOS_ADC=m
 CONFIG_VF610_ADC=m
 CONFIG_XILINX_XADC=y
@@ -902,9 +959,12 @@ CONFIG_E1000E=y
 CONFIG_PWM_STI=y
 CONFIG_PWM_BCM2835=y
 CONFIG_PWM_BRCMSTB=m
+CONFIG_PHY_DM816X_USB=m
 CONFIG_OMAP_USB2=y
 CONFIG_TI_PIPE3=y
+CONFIG_TWL4030_USB=m
 CONFIG_PHY_BERLIN_USB=y
+CONFIG_PHY_CPCAP_USB=m
 CONFIG_PHY_BERLIN_SATA=y
 CONFIG_PHY_ROCKCHIP_DP=m
 CONFIG_PHY_ROCKCHIP_USB=y
@@ -918,7 +978,9 @@ CONFIG_PHY_SAMSUNG_USB2=m
 CONFIG_PHY_TEGRA_XUSB=y
 CONFIG_PHY_BRCM_SATA=y
 CONFIG_NVMEM=y
+CONFIG_NVMEM_IMX_OCOTP=y
 CONFIG_NVMEM_SUNXI_SID=y
+CONFIG_NVMEM_VF610_OCOTP=y
 CONFIG_BCM2835_MBOX=y
 CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_EFI_VARS=m
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index bbfb6759447b..a508eb302e7a 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -1,5 +1,4 @@
 CONFIG_SYSVIPC=y
-CONFIG_FHANDLE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_TASKSTATS=y
@@ -62,14 +61,13 @@ CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
 CONFIG_ENC28J60=y
-CONFIG_SMSC_PHY=y
 CONFIG_ICPLUS_PHY=y
-CONFIG_REALTEK_PHY=y
 CONFIG_MICREL_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_SMSC_PHY=y
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC95XX=y
 # CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
@@ -77,9 +75,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_MXS_LRADC=y
 CONFIG_TOUCHSCREEN_TSC2007=m
 # CONFIG_SERIO is not set
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_MXS_AUART=y
@@ -138,11 +134,10 @@ CONFIG_RTC_DRV_STMP=y
 CONFIG_DMADEVICES=y
 CONFIG_MXS_DMA=y
 CONFIG_IIO=y
-CONFIG_IIO_SYSFS_TRIGGER=y
 CONFIG_MXS_LRADC_ADC=y
+CONFIG_IIO_SYSFS_TRIGGER=y
 CONFIG_PWM=y
 CONFIG_PWM_MXS=y
-CONFIG_NVMEM=y
 CONFIG_NVMEM_MXS_OCOTP=y
 CONFIG_EXT4_FS=y
 # CONFIG_DNOTIFY is not set
@@ -172,8 +167,7 @@ CONFIG_FRAME_WARN=2048
 CONFIG_UNUSED_SYMBOLS=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOCKUP_DETECTOR=y
-CONFIG_TIMER_STATS=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_PROVE_LOCKING=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_STRICT_DEVMEM=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index bce7e5abcc05..6491419b1dad 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -50,7 +50,6 @@ CONFIG_ARM_THUMBEE=y
 CONFIG_ARM_ERRATA_411920=y
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
-CONFIG_PCI_DRA7XX=y
 CONFIG_PCI_DRA7XX_EP=y
 CONFIG_PCI_ENDPOINT=y
 CONFIG_PCI_ENDPOINT_CONFIGFS=y
@@ -71,9 +70,10 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
 CONFIG_CPUFREQ_DT=m
-CONFIG_ARM_TI_CPUFREQ=y
 # CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
+CONFIG_ARM_TI_CPUFREQ=y
 CONFIG_CPU_IDLE=y
+CONFIG_KERNEL_MODE_NEON=y
 CONFIG_BINFMT_MISC=y
 CONFIG_PM_DEBUG=y
 CONFIG_NET=y
@@ -103,9 +103,11 @@ CONFIG_BT_HIDP=m
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTSDIO=m
 CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_NOKIA=m
 CONFIG_BT_HCIUART_BCSP=y
 CONFIG_BT_HCIUART_LL=y
 CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIUART_BCM=y
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
@@ -232,7 +234,9 @@ CONFIG_INPUT_MISC=y
 CONFIG_INPUT_CPCAP_PWRBUTTON=m
 CONFIG_INPUT_TPS65218_PWRBUTTON=m
 CONFIG_INPUT_TWL4030_PWRBUTTON=m
+CONFIG_INPUT_UINPUT=m
 CONFIG_INPUT_PALMAS_PWRBUTTON=m
+CONFIG_INPUT_PWM_VIBRA=m
 CONFIG_SERIO=m
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
@@ -244,9 +248,11 @@ CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_8250_OMAP=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_OMAP=y
 CONFIG_SERIAL_OMAP_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_SPI=y
 CONFIG_SPI_OMAP24XX=y
@@ -291,6 +297,7 @@ CONFIG_OMAP_WATCHDOG=m
 CONFIG_TWL4030_WATCHDOG=m
 CONFIG_MFD_CPCAP=y
 CONFIG_MFD_TI_AM335X_TSCADC=m
+CONFIG_MFD_TI_LMU=m
 CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65217=y
 CONFIG_MFD_TI_LP873X=y
@@ -314,40 +321,47 @@ CONFIG_REGULATOR_TPS65217=y
 CONFIG_REGULATOR_TPS65218=y
 CONFIG_REGULATOR_TPS65910=y
 CONFIG_REGULATOR_TWL4030=y
-CONFIG_MEDIA_SUPPORT=m
-CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_RC_CORE=m
-CONFIG_MEDIA_CONTROLLER=y
-CONFIG_VIDEO_V4L2_SUBDEV_API=y
 CONFIG_LIRC=y
 CONFIG_RC_DEVICES=y
+CONFIG_IR_SPI=m
 CONFIG_IR_RX51=m
+CONFIG_IR_GPIO_TX=m
+CONFIG_IR_PWM_TX=m
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_CEC_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_VIDEO_OMAP3=m
+CONFIG_CEC_PLATFORM_DRIVERS=y
 # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
 CONFIG_VIDEO_TVP5150=m
+CONFIG_DRM=m
+CONFIG_DRM_OMAP=m
+CONFIG_OMAP5_DSS_HDMI=y
+CONFIG_OMAP2_DSS_SDI=y
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_DRM_OMAP_ENCODER_OPA362=m
+CONFIG_DRM_OMAP_ENCODER_TFP410=m
+CONFIG_DRM_OMAP_ENCODER_TPD12S015=m
+CONFIG_DRM_OMAP_CONNECTOR_DVI=m
+CONFIG_DRM_OMAP_CONNECTOR_HDMI=m
+CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV=m
+CONFIG_DRM_OMAP_PANEL_DPI=m
+CONFIG_DRM_OMAP_PANEL_DSI_CM=m
+CONFIG_DRM_OMAP_PANEL_SONY_ACX565AKM=m
+CONFIG_DRM_OMAP_PANEL_LGPHILIPS_LB035Q02=m
+CONFIG_DRM_OMAP_PANEL_SHARP_LS037V7DW01=m
+CONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1=m
+CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=m
+CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11=m
+CONFIG_DRM_TILCDC=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_OMAP2=m
-CONFIG_FB_OMAP5_DSS_HDMI=y
-CONFIG_FB_OMAP2_DSS_SDI=y
-CONFIG_FB_OMAP2_DSS_DSI=y
-CONFIG_FB_OMAP2_ENCODER_TFP410=m
-CONFIG_FB_OMAP2_ENCODER_TPD12S015=m
-CONFIG_FB_OMAP2_CONNECTOR_DVI=m
-CONFIG_FB_OMAP2_CONNECTOR_HDMI=m
-CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=m
-CONFIG_FB_OMAP2_PANEL_DPI=m
-CONFIG_FB_OMAP2_PANEL_DSI_CM=m
-CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM=m
-CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=m
-CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01=m
-CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1=m
-CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1=m
-CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11=m
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
@@ -356,11 +370,11 @@ CONFIG_BACKLIGHT_PWM=m
 CONFIG_BACKLIGHT_PANDORA=m
 CONFIG_BACKLIGHT_GPIO=m
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
 CONFIG_SND=m
+CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_VERBOSE_PRINTK=y
@@ -374,7 +388,9 @@ CONFIG_SND_OMAP_SOC_HDMI_AUDIO=m
 CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
 CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
 CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
+CONFIG_SND_SOC_CPCAP=m
 CONFIG_SND_SIMPLE_CARD=m
+CONFIG_SND_AUDIO_GRAPH_CARD=m
 CONFIG_HID_GENERIC=m
 CONFIG_USB_HIDDEV=y
 CONFIG_USB_KBD=m
@@ -385,7 +401,6 @@ CONFIG_USB_MON=m
 CONFIG_USB_XHCI_HCD=m
 CONFIG_USB_EHCI_HCD=m
 CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_WDM=m
 CONFIG_USB_ACM=m
 CONFIG_USB_STORAGE=m
 CONFIG_USB_MUSB_HDRC=m
@@ -462,10 +477,16 @@ CONFIG_DMADEVICES=y
 CONFIG_DMA_OMAP=y
 CONFIG_TI_EDMA=y
 CONFIG_OMAP_IOMMU=y
-CONFIG_EXTCON=m
+CONFIG_REMOTEPROC=m
+CONFIG_OMAP_REMOTEPROC=m
+CONFIG_WKUP_M3_RPROC=m
+CONFIG_SOC_TI=y
+CONFIG_AMX3_PM=m
+CONFIG_WKUP_M3_IPC=m
 CONFIG_EXTCON_PALMAS=m
 CONFIG_EXTCON_USB_GPIO=m
 CONFIG_TI_EMIF=m
+CONFIG_TI_EMIF_SRAM=m
 CONFIG_IIO=m
 CONFIG_IIO_SW_DEVICE=m
 CONFIG_IIO_SW_TRIGGER=m
@@ -480,6 +501,7 @@ CONFIG_PWM_TIEHRPWM=m
 CONFIG_PWM_TWL=m
 CONFIG_PWM_TWL_LED=m
 CONFIG_PHY_CPCAP_USB=m
+CONFIG_PHY_MAPPHONE_MDM6600=m
 CONFIG_PHY_DM816X_USB=m
 CONFIG_OMAP_USB2=m
 CONFIG_TI_PIPE3=y
@@ -494,7 +516,6 @@ CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y
@@ -515,11 +536,18 @@ CONFIG_DEBUG_INFO_SPLIT=y
 CONFIG_DEBUG_INFO_DWARF4=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
 CONFIG_PROVE_LOCKING=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_ARM_CRYPTO=y
+CONFIG_CRYPTO_SHA1_ARM_NEON=m
+CONFIG_CRYPTO_SHA256_ARM=m
+CONFIG_CRYPTO_SHA512_ARM=m
+CONFIG_CRYPTO_AES_ARM=m
+CONFIG_CRYPTO_AES_ARM_BS=m
+CONFIG_CRYPTO_GHASH_ARM_CE=m
+CONFIG_CRYPTO_CHACHA20_NEON=m
 CONFIG_CRC_CCITT=y
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
@@ -528,13 +556,3 @@ CONFIG_LIBCRC32C=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-CONFIG_KERNEL_MODE_NEON=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_CRYPTO_SHA1_ARM=m
-CONFIG_CRYPTO_SHA1_ARM_NEON=m
-CONFIG_CRYPTO_SHA256_ARM=m
-CONFIG_CRYPTO_SHA512_ARM=m
-CONFIG_CRYPTO_AES_ARM=m
-CONFIG_CRYPTO_AES_ARM_BS=m
-CONFIG_CRYPTO_CHACHA20_NEON=m
-CONFIG_CRYPTO_GHASH_ARM_CE=m
diff --git a/arch/arm/configs/oxnas_v6_defconfig b/arch/arm/configs/oxnas_v6_defconfig
new file mode 100644
index 000000000000..f6ba32c9d173
--- /dev/null
+++ b/arch/arm/configs/oxnas_v6_defconfig
@@ -0,0 +1,93 @@
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CGROUPS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+CONFIG_STRICT_KERNEL_RWX=y
+CONFIG_STRICT_MODULE_RWX=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_CMDLINE_PARTITION=y
+CONFIG_ARCH_MULTI_V6=y
+CONFIG_ARCH_OXNAS=y
+CONFIG_MACH_OX820=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=16
+CONFIG_CMA=y
+CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_SECCOMP=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_KEXEC=y
+CONFIG_EFI=y
+CONFIG_CPU_IDLE=y
+CONFIG_ARM_CPUIDLE=y
+CONFIG_VFP=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=64
+CONFIG_SIMPLE_PM_BUS=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_OXNAS=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_NETDEVICES=y
+CONFIG_STMMAC_ETH=y
+CONFIG_REALTEK_PHY=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_CLASS_FLASH=m
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_ARM_TIMER_SP804=y
+CONFIG_EXT4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_UBIFS_FS=y
+CONFIG_PSTORE=y
+CONFIG_PSTORE_CONSOLE=y
+CONFIG_PSTORE_PMSG=y
+CONFIG_PSTORE_RAM=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig
index bfea6874b0a1..3e0de035ab77 100644
--- a/arch/arm/configs/pxa3xx_defconfig
+++ b/arch/arm/configs/pxa3xx_defconfig
@@ -32,8 +32,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_PXA3xx=y
-CONFIG_MTD_NAND_PXA3xx_BUILTIN=y
+CONFIG_MTD_NAND_MARVELL=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_GENERIC=y
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index 837d0c9c8b0e..5655a1cee87d 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -197,7 +197,7 @@ CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
 CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
 CONFIG_MTD_NAND_SHARPSL=m
-CONFIG_MTD_NAND_PXA3xx=m
+CONFIG_MTD_NAND_MARVELL=m
 CONFIG_MTD_NAND_CM_X270=m
 CONFIG_MTD_NAND_TMIO=m
 CONFIG_MTD_NAND_BRCMNAND=m
diff --git a/arch/arm/configs/raumfeld_defconfig b/arch/arm/configs/raumfeld_defconfig
index 77a56c23c6ef..2dd56e9a484e 100644
--- a/arch/arm/configs/raumfeld_defconfig
+++ b/arch/arm/configs/raumfeld_defconfig
@@ -33,7 +33,7 @@ CONFIG_NFTL=y
 CONFIG_NFTL_RW=y
 CONFIG_MTD_BLOCK2MTD=y
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_PXA3xx=y
+CONFIG_MTD_NAND_MARVELL=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_ISL29003=y
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index 2a6d69d896bd..cc9fa24d4b8f 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -11,19 +11,17 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_REALVIEW=y
-CONFIG_REALVIEW_DT=y
 CONFIG_MACH_REALVIEW_EB=y
 CONFIG_REALVIEW_EB_ARM1136=y
 CONFIG_REALVIEW_EB_ARM1176=y
 CONFIG_REALVIEW_EB_A9MP=y
 CONFIG_REALVIEW_EB_ARM11MP=y
-CONFIG_REALVIEW_EB_ARM11MP_REVB=y
 CONFIG_MACH_REALVIEW_PB11MP=y
 CONFIG_MACH_REALVIEW_PB1176=y
 CONFIG_MACH_REALVIEW_PBA8=y
 CONFIG_MACH_REALVIEW_PBX=y
 CONFIG_SMP=y
-CONFIG_AEABI=y
+CONFIG_CMA=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
@@ -46,7 +44,7 @@ CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_ROM=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_ARM_CHARLCD=y
+CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
@@ -59,21 +57,21 @@ CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
 CONFIG_I2C_VERSATILE=y
 CONFIG_SPI=y
 CONFIG_GPIOLIB=y
 # CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_DRM=y
+CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PL111=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_SOUND=y
 CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
 # CONFIG_SND_DRIVERS is not set
 CONFIG_SND_ARMAACI=y
 CONFIG_USB=y
@@ -83,13 +81,14 @@ CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_VERSATILE=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_PL031=y
+CONFIG_AUXDISPLAY=y
+CONFIG_ARM_CHARLCD=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index 578434cfd1a0..a701601fbd76 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -5,8 +5,6 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
 CONFIG_ARCH_RENESAS=y
@@ -34,7 +32,6 @@ CONFIG_SMP=y
 CONFIG_SCHED_MC=y
 CONFIG_HAVE_ARM_ARCH_TIMER=y
 CONFIG_NR_CPUS=8
-CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_CMA=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
@@ -104,9 +101,6 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_EM=y
 CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=20
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_SH_SCI_DMA=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MUX=y
 CONFIG_I2C_DEMUX_PINCTRL=y
@@ -120,6 +114,7 @@ CONFIG_SPI=y
 CONFIG_SPI_RSPI=y
 CONFIG_SPI_SH_MSIOF=y
 CONFIG_SPI_SH_HSPI=y
+CONFIG_PINCTRL_RZA1=y
 CONFIG_GPIO_EM=y
 CONFIG_GPIO_RCAR=y
 CONFIG_GPIO_PCF857X=y
@@ -166,7 +161,6 @@ CONFIG_FB_SH_MOBILE_MERAM=y
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_BACKLIGHT_AS3711=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SOC=y
@@ -227,4 +221,5 @@ CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
 # CONFIG_ARM_UNWIND is not set
diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
index bb358ffde7d2..ba805b757a8d 100644
--- a/arch/arm/configs/stm32_defconfig
+++ b/arch/arm/configs/stm32_defconfig
@@ -57,6 +57,8 @@ CONFIG_MFD_STMPE=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 # CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
@@ -71,6 +73,7 @@ CONFIG_STM32_MDMA=y
 CONFIG_IIO=y
 CONFIG_STM32_ADC_CORE=y
 CONFIG_STM32_ADC=y
+CONFIG_EXT3_FS=y
 # CONFIG_FILE_LOCKING is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index 295408ea9dc7..df68dc4056e5 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -12,6 +12,7 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_VERSATILE=y
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
+CONFIG_CMA=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=1f03 mem=32M"
@@ -32,7 +33,9 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
 CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_EEPROM_LEGACY=m
 CONFIG_NETDEVICES=y
@@ -47,21 +50,22 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_VERSATILE=y
 CONFIG_SPI=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_PL061=y
 # CONFIG_HWMON is not set
-CONFIG_MFD_SYSCON=y
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_DRM=y
+CONFIG_DRM_PANEL_ARM_VERSATILE=y
+CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PL111=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LOGO=y
 CONFIG_SOUND=y
 CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
 CONFIG_SND_ARMAACI=m
 CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
diff --git a/arch/arm/include/debug/exynos.S b/arch/arm/include/debug/exynos.S
index 60bf3c23200d..74b56769f9cb 100644
--- a/arch/arm/include/debug/exynos.S
+++ b/arch/arm/include/debug/exynos.S
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
 
 /* pull in the relevant register and map files. */
 
diff --git a/arch/arm/include/debug/samsung.S b/arch/arm/include/debug/samsung.S
index f4eeed2a1981..69201d7fb48f 100644
--- a/arch/arm/include/debug/samsung.S
+++ b/arch/arm/include/debug/samsung.S
@@ -1,13 +1,9 @@
-/* arch/arm/plat-samsung/include/plat/debug-macro.S
- *
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
  * Copyright 2005, 2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
 
 #include <linux/serial_s3c.h>
 
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 6d870421a7a6..1254bf9d91b4 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -1,5 +1,5 @@
 menuconfig ARCH_AT91
-	bool "Atmel SoCs"
+	bool "AT91/Microchip SoCs"
 	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M
 	select ARM_CPU_SUSPEND if PM && ARCH_MULTI_V7
 	select COMMON_CLK_AT91
@@ -13,7 +13,7 @@ config SOC_SAMV7
 	select COMMON_CLK_AT91
 	select PINCTRL_AT91
 	help
-	  Select this if you are using an SoC from Atmel's SAME7, SAMS7 or SAMV7
+	  Select this if you are using an SoC from Microchip's SAME7, SAMS7 or SAMV7
 	  families.
 
 config SOC_SAMA5D2
@@ -29,7 +29,7 @@ config SOC_SAMA5D2
 	select HAVE_AT91_AUDIO_PLL
 	select PINCTRL_AT91PIO4
 	help
-	  Select this if ou are using one of Atmel's SAMA5D2 family SoC.
+	  Select this if ou are using one of Microchip's SAMA5D2 family SoC.
 
 config SOC_SAMA5D3
 	bool "SAMA5D3 family"
@@ -41,7 +41,7 @@ config SOC_SAMA5D3
 	select HAVE_AT91_USB_CLK
 	select PINCTRL_AT91
 	help
-	  Select this if you are using one of Atmel's SAMA5D3 family SoC.
+	  Select this if you are using one of Microchip's SAMA5D3 family SoC.
 	  This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36.
 
 config SOC_SAMA5D4
@@ -56,7 +56,7 @@ config SOC_SAMA5D4
 	select HAVE_AT91_H32MX
 	select PINCTRL_AT91
 	help
-	  Select this if you are using one of Atmel's SAMA5D4 family SoC.
+	  Select this if you are using one of Microchip's SAMA5D4 family SoC.
 
 config SOC_AT91RM9200
 	bool "AT91RM9200"
@@ -70,7 +70,7 @@ config SOC_AT91RM9200
 	select SOC_SAM_V4_V5
 	select SRAM if PM
 	help
-	  Select this if you are using Atmel's AT91RM9200 SoC.
+	  Select this if you are using Microchip's AT91RM9200 SoC.
 
 config SOC_AT91SAM9
 	bool "AT91SAM9"
@@ -88,7 +88,7 @@ config SOC_AT91SAM9
 	select SOC_SAM_V4_V5
 	select SRAM if PM
 	help
-	  Select this if you are using one of those Atmel SoC:
+	  Select this if you are using one of those Microchip SoC:
 	    AT91SAM9260
 	    AT91SAM9261
 	    AT91SAM9263
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index f673cd7a6766..004f9c8de032 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -239,20 +239,6 @@ static inline void da830_evm_init_mmc(void)
 	}
 }
 
-/*
- * UI board NAND/NOR flashes only use 8-bit data bus.
- */
-static const short da830_evm_emif25_pins[] = {
-	DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3,
-	DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7,
-	DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3,
-	DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7,
-	DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11,
-	DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_NEMA_WE,
-	DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE, DA830_EMA_WAIT_0,
-	-1
-};
-
 #define HAS_MMC		IS_ENABLED(CONFIG_MMC_DAVINCI)
 
 #ifdef CONFIG_DA830_UI_NAND
@@ -357,6 +343,20 @@ static struct platform_device da830_evm_nand_device = {
 	.resource	= da830_evm_nand_resources,
 };
 
+/*
+ * UI board NAND/NOR flashes only use 8-bit data bus.
+ */
+static const short da830_evm_emif25_pins[] = {
+	DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3,
+	DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7,
+	DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3,
+	DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7,
+	DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11,
+	DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_NEMA_WE,
+	DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE, DA830_EMA_WAIT_0,
+	-1
+};
+
 static inline void da830_evm_init_nand(int mux_mode)
 {
 	int ret;
@@ -551,10 +551,6 @@ static __init void da830_evm_init(void)
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	int ret;
 
-	ret = da8xx_register_cfgchip();
-	if (ret)
-		pr_warn("%s: CFGCHIP registration failed: %d\n", __func__, ret);
-
 	ret = da830_register_gpio();
 	if (ret)
 		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
@@ -638,9 +634,8 @@ MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
 	.atag_offset	= 0x100,
 	.map_io		= da830_evm_map_io,
 	.init_irq	= cp_intc_init,
-	.init_time	= davinci_timer_init,
+	.init_time	= da830_init_time,
 	.init_machine	= da830_evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
-	.restart	= da8xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index d898a94f6eae..3063478bcc36 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1334,10 +1334,6 @@ static __init void da850_evm_init(void)
 {
 	int ret;
 
-	ret = da8xx_register_cfgchip();
-	if (ret)
-		pr_warn("%s: CFGCHIP registration failed: %d\n", __func__, ret);
-
 	ret = da850_register_gpio();
 	if (ret)
 		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
@@ -1481,10 +1477,9 @@ MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
 	.atag_offset	= 0x100,
 	.map_io		= da850_evm_map_io,
 	.init_irq	= cp_intc_init,
-	.init_time	= davinci_timer_init,
+	.init_time	= da850_init_time,
 	.init_machine	= da850_evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
-	.restart	= da8xx_restart,
 	.reserve	= da8xx_rproc_reserve_cma,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index d6b11907380c..cb30637d9eaf 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -427,9 +427,8 @@ MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
 	.atag_offset  = 0x100,
 	.map_io	      = dm355_evm_map_io,
 	.init_irq     = davinci_irq_init,
-	.init_time	= davinci_timer_init,
+	.init_time	= dm355_init_time,
 	.init_machine = dm355_evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
-	.restart	= davinci_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index fad9a5611a5d..59743bd76793 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -271,9 +271,8 @@ MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
 	.atag_offset  = 0x100,
 	.map_io	      = dm355_leopard_map_io,
 	.init_irq     = davinci_irq_init,
-	.init_time	= davinci_timer_init,
+	.init_time	= dm355_init_time,
 	.init_machine = dm355_leopard_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
-	.restart	= davinci_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index e3780986d2a3..0ac085b58a2b 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -774,10 +774,9 @@ MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
 	.atag_offset	= 0x100,
 	.map_io		= dm365_evm_map_io,
 	.init_irq	= davinci_irq_init,
-	.init_time	= davinci_timer_init,
+	.init_time	= dm365_init_time,
 	.init_machine	= dm365_evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
-	.restart	= davinci_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 85e6fb33b1ee..95b55aae1366 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -828,9 +828,8 @@ MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
 	.atag_offset  = 0x100,
 	.map_io	      = davinci_evm_map_io,
 	.init_irq     = davinci_irq_init,
-	.init_time	= davinci_timer_init,
+	.init_time	= dm644x_init_time,
 	.init_machine = davinci_evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
-	.restart	= davinci_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index cb0a41e83582..2d37f5b0e1f5 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -44,10 +44,8 @@
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/serial.h>
-#include <mach/clock.h>
 
 #include "davinci.h"
-#include "clock.h"
 
 #define NAND_BLOCK_SIZE		SZ_128K
 
@@ -716,14 +714,23 @@ static void __init evm_init_i2c(void)
 }
 #endif
 
+#define DM646X_REF_FREQ			27000000
+#define DM646X_AUX_FREQ			24000000
 #define DM6467T_EVM_REF_FREQ		33000000
 
 static void __init davinci_map_io(void)
 {
 	dm646x_init();
+}
 
-	if (machine_is_davinci_dm6467tevm())
-		davinci_set_refclk_rate(DM6467T_EVM_REF_FREQ);
+static void __init dm646x_evm_init_time(void)
+{
+	dm646x_init_time(DM646X_REF_FREQ, DM646X_AUX_FREQ);
+}
+
+static void __init dm6467t_evm_init_time(void)
+{
+	dm646x_init_time(DM6467T_EVM_REF_FREQ, DM646X_AUX_FREQ);
 }
 
 #define DM646X_EVM_PHY_ID		"davinci_mdio-0:01"
@@ -797,21 +804,19 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
 	.atag_offset  = 0x100,
 	.map_io       = davinci_map_io,
 	.init_irq     = davinci_irq_init,
-	.init_time	= davinci_timer_init,
+	.init_time	= dm646x_evm_init_time,
 	.init_machine = evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
-	.restart	= davinci_restart,
 MACHINE_END
 
 MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
 	.atag_offset  = 0x100,
 	.map_io       = davinci_map_io,
 	.init_irq     = davinci_irq_init,
-	.init_time	= davinci_timer_init,
+	.init_time	= dm6467t_evm_init_time,
 	.init_machine = evm_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
-	.restart	= davinci_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index b73ce7bae81f..d1c85484c2e2 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -502,10 +502,6 @@ static void __init mityomapl138_init(void)
 {
 	int ret;
 
-	ret = da8xx_register_cfgchip();
-	if (ret)
-		pr_warn("%s: CFGCHIP registration failed: %d\n", __func__, ret);
-
 	/* for now, no special EDMA channels are reserved */
 	ret = da850_register_edma(NULL);
 	if (ret)
@@ -570,9 +566,8 @@ MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
 	.atag_offset	= 0x100,
 	.map_io		= mityomapl138_map_io,
 	.init_irq	= cp_intc_init,
-	.init_time	= davinci_timer_init,
+	.init_time	= da850_init_time,
 	.init_machine	= mityomapl138_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
-	.restart	= da8xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 4da210a1a110..f2875770fbff 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -227,9 +227,8 @@ MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
 	.atag_offset	= 0x100,
 	.map_io		 = davinci_ntosd2_map_io,
 	.init_irq	= davinci_irq_init,
-	.init_time	= davinci_timer_init,
+	.init_time	= dm644x_init_time,
 	.init_machine = davinci_ntosd2_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
-	.restart	= davinci_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 62eb7d668890..0d32042b728f 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -281,10 +281,6 @@ static __init void omapl138_hawk_init(void)
 {
 	int ret;
 
-	ret = da8xx_register_cfgchip();
-	if (ret)
-		pr_warn("%s: CFGCHIP registration failed: %d\n", __func__, ret);
-
 	ret = da850_register_gpio();
 	if (ret)
 		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
@@ -334,10 +330,9 @@ MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
 	.atag_offset	= 0x100,
 	.map_io		= omapl138_hawk_map_io,
 	.init_irq	= cp_intc_init,
-	.init_time	= davinci_timer_init,
+	.init_time	= da850_init_time,
 	.init_machine	= omapl138_hawk_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
-	.restart	= da8xx_restart,
 	.reserve	= da8xx_rproc_reserve_cma,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index d85accf7f760..2922da9d1684 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -150,9 +150,8 @@ MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
 	.atag_offset  = 0x100,
 	.map_io	      = davinci_sffsdr_map_io,
 	.init_irq     = davinci_irq_init,
-	.init_time	= davinci_timer_init,
+	.init_time	= dm644x_init_time,
 	.init_machine = davinci_sffsdr_init,
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
-	.restart	= davinci_restart,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index fa2b83752e03..d7894d5aaa25 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -135,9 +135,6 @@ int davinci_clk_reset(struct clk *clk, bool reset);
 void davinci_clk_enable(struct clk *clk);
 void davinci_clk_disable(struct clk *clk);
 
-extern struct platform_device davinci_wdt_device;
-extern void davinci_watchdog_reset(struct platform_device *);
-
 #endif
 
 #endif
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 57ab18cf2a89..350d7673aa4d 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -1200,7 +1200,6 @@ static const struct davinci_soc_info davinci_soc_info_da830 = {
 	.jtag_id_reg		= DA8XX_SYSCFG0_BASE + DA8XX_JTAG_ID_REG,
 	.ids			= da830_ids,
 	.ids_num		= ARRAY_SIZE(da830_ids),
-	.cpu_clks		= da830_clks,
 	.psc_bases		= da830_psc_bases,
 	.psc_bases_num		= ARRAY_SIZE(da830_psc_bases),
 	.pinmux_base		= DA8XX_SYSCFG0_BASE + 0x120,
@@ -1220,6 +1219,10 @@ void __init da830_init(void)
 
 	da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
 	WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module");
+}
 
-	davinci_clk_init(davinci_soc_info_da830.cpu_clks);
+void __init da830_init_time(void)
+{
+	davinci_clk_init(da830_clks);
+	davinci_timer_init();
 }
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index aa37cbdf7d4d..34117e614e08 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -1353,7 +1353,6 @@ static const struct davinci_soc_info davinci_soc_info_da850 = {
 	.jtag_id_reg		= DA8XX_SYSCFG0_BASE + DA8XX_JTAG_ID_REG,
 	.ids			= da850_ids,
 	.ids_num		= ARRAY_SIZE(da850_ids),
-	.cpu_clks		= da850_clks,
 	.psc_bases		= da850_psc_bases,
 	.psc_bases_num		= ARRAY_SIZE(da850_psc_bases),
 	.pinmux_base		= DA8XX_SYSCFG0_BASE + 0x120,
@@ -1392,6 +1391,10 @@ void __init da850_init(void)
 	v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
 	v &= ~CFGCHIP3_PLL1_MASTER_LOCK;
 	__raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
+}
 
-	davinci_clk_init(davinci_soc_info_da850.cpu_clks);
+void __init da850_init_time(void)
+{
+	davinci_clk_init(da850_clks);
+	davinci_timer_init();
 }
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index f06db6700ab2..ab199f4b9ce4 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -96,11 +96,10 @@ static const char *const da850_boards_compat[] __initconst = {
 
 DT_MACHINE_START(DA850_DT, "Generic DA850/OMAP-L138/AM18x")
 	.map_io		= da850_init,
-	.init_time	= davinci_timer_init,
+	.init_time	= da850_init_time,
 	.init_machine	= da850_init_machine,
 	.dt_compat	= da850_boards_compat,
 	.init_late	= davinci_init_late,
-	.restart	= da8xx_restart,
 MACHINE_END
 
 #endif
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index c62b90c6118a..270cef85750a 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -83,6 +83,7 @@ int davinci_init_wdt(void);
 
 /* DM355 function declarations */
 void dm355_init(void);
+void dm355_init_time(void);
 void dm355_init_spi0(unsigned chipselect_mask,
 		const struct spi_board_info *info, unsigned len);
 void dm355_init_asp1(u32 evt_enable);
@@ -91,6 +92,7 @@ int dm355_gpio_register(void);
 
 /* DM365 function declarations */
 void dm365_init(void);
+void dm365_init_time(void);
 void dm365_init_asp(void);
 void dm365_init_vc(void);
 void dm365_init_ks(struct davinci_ks_platform_data *pdata);
@@ -102,12 +104,14 @@ int dm365_gpio_register(void);
 
 /* DM644x function declarations */
 void dm644x_init(void);
+void dm644x_init_time(void);
 void dm644x_init_asp(void);
 int dm644x_init_video(struct vpfe_config *, struct vpbe_config *);
 int dm644x_gpio_register(void);
 
 /* DM646x function declarations */
 void dm646x_init(void);
+void dm646x_init_time(unsigned long ref_clk_rate, unsigned long aux_clkin_rate);
 void dm646x_init_mcasp0(struct snd_platform_data *pdata);
 void dm646x_init_mcasp1(struct snd_platform_data *pdata);
 int dm646x_init_edma(struct edma_rsv_info *rsv);
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index e1c40e73d30a..78390c64e6ca 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -11,7 +11,6 @@
  * (at your option) any later version.
  */
 #include <linux/init.h>
-#include <linux/platform_data/syscon.h>
 #include <linux/platform_device.h>
 #include <linux/dma-contiguous.h>
 #include <linux/serial_8250.h>
@@ -371,19 +370,6 @@ static struct platform_device da8xx_wdt_device = {
 	.resource	= da8xx_watchdog_resources,
 };
 
-void da8xx_restart(enum reboot_mode mode, const char *cmd)
-{
-	struct device *dev;
-
-	dev = bus_find_device_by_name(&platform_bus_type, NULL, "davinci-wdt");
-	if (!dev) {
-		pr_err("%s: failed to find watchdog device\n", __func__);
-		return;
-	}
-
-	davinci_watchdog_reset(to_platform_device(dev));
-}
-
 int __init da8xx_register_watchdog(void)
 {
 	return platform_device_register(&da8xx_wdt_device);
@@ -1118,29 +1104,30 @@ int __init da850_register_sata(unsigned long refclkpn)
 }
 #endif
 
-static struct syscon_platform_data da8xx_cfgchip_platform_data = {
-	.label	= "cfgchip",
-};
-
-static struct resource da8xx_cfgchip_resources[] = {
-	{
-		.start	= DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP0_REG,
-		.end	= DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP4_REG + 3,
-		.flags	= IORESOURCE_MEM,
-	},
-};
+static struct regmap *da8xx_cfgchip;
 
-static struct platform_device da8xx_cfgchip_device = {
-	.name	= "syscon",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &da8xx_cfgchip_platform_data,
-	},
-	.num_resources	= ARRAY_SIZE(da8xx_cfgchip_resources),
-	.resource	= da8xx_cfgchip_resources,
+static const struct regmap_config da8xx_cfgchip_config __initconst = {
+	.name		= "cfgchip",
+	.reg_bits	= 32,
+	.val_bits	= 32,
+	.reg_stride	= 4,
+	.max_register	= DA8XX_CFGCHIP4_REG - DA8XX_CFGCHIP0_REG,
 };
 
-int __init da8xx_register_cfgchip(void)
+/**
+ * da8xx_get_cfgchip - Lazy gets CFGCHIP as regmap
+ *
+ * This is for use on non-DT boards only. For DT boards, use
+ * syscon_regmap_lookup_by_compatible("ti,da830-cfgchip")
+ *
+ * Returns: Pointer to the CFGCHIP regmap or negative error code.
+ */
+struct regmap * __init da8xx_get_cfgchip(void)
 {
-	return platform_device_register(&da8xx_cfgchip_device);
+	if (IS_ERR_OR_NULL(da8xx_cfgchip))
+		da8xx_cfgchip = regmap_init_mmio(NULL,
+					DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG),
+					&da8xx_cfgchip_config);
+
+	return da8xx_cfgchip;
 }
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 3ae70f2909b0..0edda4093e47 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -282,18 +282,13 @@ static struct resource wdt_resources[] = {
 	},
 };
 
-struct platform_device davinci_wdt_device = {
+static struct platform_device davinci_wdt_device = {
 	.name		= "davinci-wdt",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(wdt_resources),
 	.resource	= wdt_resources,
 };
 
-void davinci_restart(enum reboot_mode mode, const char *cmd)
-{
-	davinci_watchdog_reset(&davinci_wdt_device);
-}
-
 int davinci_init_wdt(void)
 {
 	return platform_device_register(&davinci_wdt_device);
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 938747f20c22..f29480495c18 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -1012,7 +1012,6 @@ static const struct davinci_soc_info davinci_soc_info_dm355 = {
 	.jtag_id_reg		= 0x01c40028,
 	.ids			= dm355_ids,
 	.ids_num		= ARRAY_SIZE(dm355_ids),
-	.cpu_clks		= dm355_clks,
 	.psc_bases		= dm355_psc_bases,
 	.psc_bases_num		= ARRAY_SIZE(dm355_psc_bases),
 	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
@@ -1043,7 +1042,12 @@ void __init dm355_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm355);
 	davinci_map_sysmod();
-	davinci_clk_init(davinci_soc_info_dm355.cpu_clks);
+}
+
+void __init dm355_init_time(void)
+{
+	davinci_clk_init(dm355_clks);
+	davinci_timer_init();
 }
 
 int __init dm355_init_video(struct vpfe_config *vpfe_cfg,
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 5d9f96df08e9..1e3df9df1e10 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -1116,7 +1116,6 @@ static const struct davinci_soc_info davinci_soc_info_dm365 = {
 	.jtag_id_reg		= 0x01c40028,
 	.ids			= dm365_ids,
 	.ids_num		= ARRAY_SIZE(dm365_ids),
-	.cpu_clks		= dm365_clks,
 	.psc_bases		= dm365_psc_bases,
 	.psc_bases_num		= ARRAY_SIZE(dm365_psc_bases),
 	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
@@ -1168,7 +1167,12 @@ void __init dm365_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm365);
 	davinci_map_sysmod();
-	davinci_clk_init(davinci_soc_info_dm365.cpu_clks);
+}
+
+void __init dm365_init_time(void)
+{
+	davinci_clk_init(dm365_clks);
+	davinci_timer_init();
 }
 
 static struct resource dm365_vpss_resources[] = {
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 6b41e1ca511e..b409801649e1 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -905,7 +905,6 @@ static const struct davinci_soc_info davinci_soc_info_dm644x = {
 	.jtag_id_reg		= 0x01c40028,
 	.ids			= dm644x_ids,
 	.ids_num		= ARRAY_SIZE(dm644x_ids),
-	.cpu_clks		= dm644x_clks,
 	.psc_bases		= dm644x_psc_bases,
 	.psc_bases_num		= ARRAY_SIZE(dm644x_psc_bases),
 	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
@@ -931,7 +930,12 @@ void __init dm644x_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm644x);
 	davinci_map_sysmod();
-	davinci_clk_init(davinci_soc_info_dm644x.cpu_clks);
+}
+
+void __init dm644x_init_time(void)
+{
+	davinci_clk_init(dm644x_clks);
+	davinci_timer_init();
 }
 
 int __init dm644x_init_video(struct vpfe_config *vpfe_cfg,
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 6fc06a6ad4f8..109ab1fa0d2c 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -39,12 +39,6 @@
 #define VSCLKDIS_MASK		(BIT_MASK(11) | BIT_MASK(10) | BIT_MASK(9) |\
 					BIT_MASK(8))
 
-/*
- * Device specific clocks
- */
-#define DM646X_REF_FREQ		27000000
-#define DM646X_AUX_FREQ		24000000
-
 #define DM646X_EMAC_BASE		0x01c80000
 #define DM646X_EMAC_MDIO_BASE		(DM646X_EMAC_BASE + 0x4000)
 #define DM646X_EMAC_CNTRL_OFFSET	0x0000
@@ -64,13 +58,12 @@ static struct pll_data pll2_data = {
 
 static struct clk ref_clk = {
 	.name = "ref_clk",
-	.rate = DM646X_REF_FREQ,
-	.set_rate = davinci_simple_set_rate,
+	/* rate is initialized in dm646x_init_time() */
 };
 
 static struct clk aux_clkin = {
 	.name = "aux_clkin",
-	.rate = DM646X_AUX_FREQ,
+	/* rate is initialized in dm646x_init_time() */
 };
 
 static struct clk pll1_clk = {
@@ -888,7 +881,6 @@ static const struct davinci_soc_info davinci_soc_info_dm646x = {
 	.jtag_id_reg		= 0x01c40028,
 	.ids			= dm646x_ids,
 	.ids_num		= ARRAY_SIZE(dm646x_ids),
-	.cpu_clks		= dm646x_clks,
 	.psc_bases		= dm646x_psc_bases,
 	.psc_bases_num		= ARRAY_SIZE(dm646x_psc_bases),
 	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
@@ -956,7 +948,15 @@ void __init dm646x_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm646x);
 	davinci_map_sysmod();
-	davinci_clk_init(davinci_soc_info_dm646x.cpu_clks);
+}
+
+void __init dm646x_init_time(unsigned long ref_clk_rate,
+			     unsigned long aux_clkin_rate)
+{
+	ref_clk.rate = ref_clk_rate;
+	aux_clkin.rate = aux_clkin_rate;
+	davinci_clk_init(dm646x_clks);
+	davinci_timer_init();
 }
 
 static int __init dm646x_init_devices(void)
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index 433a008ff796..f0d5e858f158 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -53,7 +53,6 @@ struct davinci_soc_info {
 	u32				jtag_id_reg;
 	struct davinci_id		*ids;
 	unsigned long			ids_num;
-	struct clk_lookup		*cpu_clks;
 	u32				*psc_bases;
 	unsigned long			psc_bases_num;
 	u32				pinmux_base;
@@ -81,7 +80,6 @@ extern struct davinci_soc_info davinci_soc_info;
 
 extern void davinci_common_init(const struct davinci_soc_info *soc_info);
 extern void davinci_init_ide(void);
-void davinci_restart(enum reboot_mode mode, const char *cmd);
 void davinci_init_late(void);
 
 #ifdef CONFIG_DAVINCI_RESET_CLOCKS
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 93ff1569cee5..9fd6d0125762 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -18,6 +18,7 @@
 #include <linux/spi/spi.h>
 #include <linux/platform_data/davinci_asp.h>
 #include <linux/reboot.h>
+#include <linux/regmap.h>
 #include <linux/videodev2.h>
 
 #include <mach/serial.h>
@@ -87,7 +88,10 @@ extern unsigned int da850_max_speed;
 #define DA8XX_ARM_RAM_BASE	0xffff0000
 
 void da830_init(void);
+void da830_init_time(void);
+
 void da850_init(void);
+void da850_init_time(void);
 
 int da830_register_edma(struct edma_rsv_info *rsv);
 int da850_register_edma(struct edma_rsv_info *rsv[2]);
@@ -118,12 +122,11 @@ int da850_register_vpif_display
 			(struct vpif_display_config *display_config);
 int da850_register_vpif_capture
 			(struct vpif_capture_config *capture_config);
-void da8xx_restart(enum reboot_mode mode, const char *cmd);
 void da8xx_rproc_reserve_cma(void);
 int da8xx_register_rproc(void);
 int da850_register_gpio(void);
 int da830_register_gpio(void);
-int da8xx_register_cfgchip(void);
+struct regmap *da8xx_get_cfgchip(void);
 
 extern struct platform_device da8xx_serial_device[];
 extern struct emac_platform_data da8xx_emac_pdata;
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 034f865fe78e..1bb991ad9c1e 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -80,13 +80,6 @@ enum {
 #define TGCR_UNRESET                 0x1
 #define TGCR_RESET_MASK              0x3
 
-#define WDTCR_WDEN_SHIFT             14
-#define WDTCR_WDEN_DISABLE           0x0
-#define WDTCR_WDEN_ENABLE            0x1
-#define WDTCR_WDKEY_SHIFT            16
-#define WDTCR_WDKEY_SEQ0             0xa5c6
-#define WDTCR_WDKEY_SEQ1             0xda7e
-
 struct timer_s {
 	char *name;
 	unsigned int id;
@@ -409,53 +402,3 @@ void __init davinci_timer_init(void)
 	for (i=0; i< ARRAY_SIZE(timers); i++)
 		timer32_config(&timers[i]);
 }
-
-/* reset board using watchdog timer */
-void davinci_watchdog_reset(struct platform_device *pdev)
-{
-	u32 tgcr, wdtcr;
-	void __iomem *base;
-	struct clk *wd_clk;
-
-	base = ioremap(pdev->resource[0].start, SZ_4K);
-	if (WARN_ON(!base))
-		return;
-
-	wd_clk = clk_get(&pdev->dev, NULL);
-	if (WARN_ON(IS_ERR(wd_clk)))
-		return;
-	clk_prepare_enable(wd_clk);
-
-	/* disable, internal clock source */
-	__raw_writel(0, base + TCR);
-
-	/* reset timer, set mode to 64-bit watchdog, and unreset */
-	tgcr = 0;
-	__raw_writel(tgcr, base + TGCR);
-	tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT;
-	tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
-		(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
-	__raw_writel(tgcr, base + TGCR);
-
-	/* clear counter and period regs */
-	__raw_writel(0, base + TIM12);
-	__raw_writel(0, base + TIM34);
-	__raw_writel(0, base + PRD12);
-	__raw_writel(0, base + PRD34);
-
-	/* put watchdog in pre-active state */
-	wdtcr = __raw_readl(base + WDTCR);
-	wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) |
-		(WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
-	__raw_writel(wdtcr, base + WDTCR);
-
-	/* put watchdog in active state */
-	wdtcr = (WDTCR_WDKEY_SEQ1 << WDTCR_WDKEY_SHIFT) |
-		(WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
-	__raw_writel(wdtcr, base + WDTCR);
-
-	/* write an invalid value to the WDKEY field to trigger
-	 * a watchdog reset */
-	wdtcr = 0x00004000;
-	__raw_writel(wdtcr, base + WDTCR);
-}
diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c
index d480a02e1298..50445f0e98de 100644
--- a/arch/arm/mach-davinci/usb-da8xx.c
+++ b/arch/arm/mach-davinci/usb-da8xx.c
@@ -8,6 +8,7 @@
 #include <linux/init.h>
 #include <linux/mfd/da8xx-cfgchip.h>
 #include <linux/phy/phy.h>
+#include <linux/platform_data/phy-da8xx-usb.h>
 #include <linux/platform_data/usb-davinci.h>
 #include <linux/platform_device.h>
 #include <linux/usb/musb.h>
@@ -25,6 +26,8 @@
 
 static struct clk *usb20_clk;
 
+static struct da8xx_usb_phy_platform_data da8xx_usb_phy_pdata;
+
 static struct platform_device da8xx_usb_phy = {
 	.name		= "da8xx-usb-phy",
 	.id		= -1,
@@ -35,11 +38,14 @@ static struct platform_device da8xx_usb_phy = {
 		 * registered yet.
 		 */
 		.init_name	= "da8xx-usb-phy",
+		.platform_data	= &da8xx_usb_phy_pdata,
 	},
 };
 
 int __init da8xx_register_usb_phy(void)
 {
+	da8xx_usb_phy_pdata.cfgchip = da8xx_get_cfgchip();
+
 	return platform_device_register(&da8xx_usb_phy);
 }
 
@@ -256,14 +262,14 @@ static int usb20_phy_clk_set_parent(struct clk *clk, struct clk *parent)
 }
 
 static struct clk usb20_phy_clk = {
-	.name		= "usb20_phy",
+	.name		= "usb0_clk48",
 	.clk_enable	= usb20_phy_clk_enable,
 	.clk_disable	= usb20_phy_clk_disable,
 	.set_parent	= usb20_phy_clk_set_parent,
 };
 
 static struct clk_lookup usb20_phy_clk_lookup =
-	CLK("da8xx-usb-phy", "usb20_phy", &usb20_phy_clk);
+	CLK("da8xx-usb-phy", "usb0_clk48", &usb20_phy_clk);
 
 /**
  * da8xx_register_usb20_phy_clk - register USB0PHYCLKMUX clock
@@ -320,18 +326,18 @@ static int usb11_phy_clk_set_parent(struct clk *clk, struct clk *parent)
 }
 
 static struct clk usb11_phy_clk = {
-	.name		= "usb11_phy",
+	.name		= "usb1_clk48",
 	.set_parent	= usb11_phy_clk_set_parent,
 };
 
 static struct clk_lookup usb11_phy_clk_lookup =
-	CLK("da8xx-usb-phy", "usb11_phy", &usb11_phy_clk);
+	CLK("da8xx-usb-phy", "usb1_clk48", &usb11_phy_clk);
 
 /**
  * da8xx_register_usb11_phy_clk - register USB1PHYCLKMUX clock
  *
  * @use_usb_refclkin: Selects the parent clock - either "usb_refclkin" if true
- *	or "usb20_phy" if false.
+ *	or "usb0_clk48" if false.
  */
 int __init da8xx_register_usb11_phy_clk(bool use_usb_refclkin)
 {
@@ -341,7 +347,7 @@ int __init da8xx_register_usb11_phy_clk(bool use_usb_refclkin)
 	if (use_usb_refclkin)
 		parent = clk_get(NULL, "usb_refclkin");
 	else
-		parent = clk_get(&da8xx_usb_phy.dev, "usb20_phy");
+		parent = clk_get(&da8xx_usb_phy.dev, "usb0_clk48");
 	if (IS_ERR(parent))
 		return PTR_ERR(parent);
 
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index fbd108ce8745..8c4f5e342dc1 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -192,7 +192,8 @@ static void __init exynos_dt_machine_init(void)
 #endif
 	if (of_machine_is_compatible("samsung,exynos4210") ||
 	    (of_machine_is_compatible("samsung,exynos4412") &&
-	     of_machine_is_compatible("samsung,trats2")) ||
+	     (of_machine_is_compatible("samsung,trats2") ||
+		  of_machine_is_compatible("samsung,midas"))) ||
 	    of_machine_is_compatible("samsung,exynos3250") ||
 	    of_machine_is_compatible("samsung,exynos5250"))
 		platform_device_register(&exynos_cpuidle);
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index dc4346ecf16d..a822c5073715 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -163,7 +163,7 @@ void exynos_enter_aftr(void)
 
 	exynos_pm_central_suspend();
 
-	if (of_machine_is_compatible("samsung,exynos4412")) {
+	if (soc_is_exynos4412()) {
 		/* Setting SEQ_OPTION register */
 		pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0,
 			       S5P_CENTRAL_SEQ_OPTION);
@@ -271,11 +271,7 @@ abort:
 				goto fail;
 
 			call_firmware_op(cpu_boot, 1);
-
-			if (soc_is_exynos3250())
-				dsb_sev();
-			else
-				arch_send_wakeup_ipi_mask(cpumask_of(1));
+			dsb_sev();
 		}
 	}
 fail:
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 782699e67600..e47fa13f4b0c 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -32,18 +32,6 @@ config MXC_DEBUG_BOARD
 	  data/address de-multiplexing and decode, signal level shift,
 	  interrupt control and various board functions.
 
-config HAVE_EPIT
-	bool
-
-config MXC_USE_EPIT
-	bool "Use EPIT instead of GPT"
-	depends on HAVE_EPIT
-	help
-	  Use EPIT as the system timer on systems that have it. Normally you
-	  don't have a reason to do so as the EPIT has the same features and
-	  uses the same clocks as the GPT. Anyway, on some systems the GPT
-	  may be in use for other purposes.
-
 config HAVE_IMX_ANATOP
 	bool
 
@@ -85,7 +73,6 @@ config SOC_IMX31
 config SOC_IMX35
 	bool
 	select ARCH_MXC_IOMUX_V3
-	select HAVE_EPIT
 	select MXC_AVIC
 	select PINCTRL_IMX35
 
@@ -482,7 +469,7 @@ config	SOC_IMX53
 
 config SOC_IMX6
 	bool
-	select ARM_CPU_SUSPEND if PM
+	select ARM_CPU_SUSPEND if (PM || CPU_IDLE)
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
 	select ARM_GIC
@@ -512,6 +499,13 @@ config SOC_IMX6SL
 	help
 	  This enables support for Freescale i.MX6 SoloLite processor.
 
+config SOC_IMX6SLL
+	bool "i.MX6 SoloLiteLite support"
+	select SOC_IMX6
+
+	help
+	  This enables support for Freescale i.MX6 SoloLiteLite processor.
+
 config SOC_IMX6SX
 	bool "i.MX6 SoloX support"
 	select PINCTRL_IMX6SX
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 8ff71058207d..2327e3e876d8 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -20,13 +20,13 @@ obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 obj-$(CONFIG_MXC_TZIC) += tzic.o
 obj-$(CONFIG_MXC_AVIC) += avic.o
 
-obj-$(CONFIG_MXC_USE_EPIT) += epit.o
 obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
 
 ifeq ($(CONFIG_CPU_IDLE),y)
 obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o
 obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o
 obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o
+obj-$(CONFIG_SOC_IMX6SLL) += cpuidle-imx6sl.o
 obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6sx.o
 obj-$(CONFIG_SOC_IMX6UL) += cpuidle-imx6sx.o
 endif
@@ -78,6 +78,7 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 endif
 obj-$(CONFIG_SOC_IMX6Q) += mach-imx6q.o
 obj-$(CONFIG_SOC_IMX6SL) += mach-imx6sl.o
+obj-$(CONFIG_SOC_IMX6SLL) += mach-imx6sl.o
 obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o
 obj-$(CONFIG_SOC_IMX6UL) += mach-imx6ul.o
 obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o
diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
index 649a84c251ad..61f3d94f1633 100644
--- a/arch/arm/mach-imx/anatop.c
+++ b/arch/arm/mach-imx/anatop.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (C) 2013-2015 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP.
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
@@ -116,6 +117,7 @@ void __init imx_init_revision_from_anatop(void)
 	unsigned int revision;
 	u32 digprog;
 	u16 offset = ANADIG_DIGPROG;
+	u8 major_part, minor_part;
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
 	anatop_base = of_iomap(np, 0);
@@ -127,45 +129,25 @@ void __init imx_init_revision_from_anatop(void)
 	digprog = readl_relaxed(anatop_base + offset);
 	iounmap(anatop_base);
 
-	switch (digprog & 0xff) {
-	case 0:
-		/*
-		 * For i.MX6QP, most of the code for i.MX6Q can be resued,
-		 * so internally, we identify it as i.MX6Q Rev 2.0
-		 */
-		if (digprog >> 8 & 0x01)
-			revision = IMX_CHIP_REVISION_2_0;
-		else
-			revision = IMX_CHIP_REVISION_1_0;
-		break;
-	case 1:
-		revision = IMX_CHIP_REVISION_1_1;
-		break;
-	case 2:
-		revision = IMX_CHIP_REVISION_1_2;
-		break;
-	case 3:
-		revision = IMX_CHIP_REVISION_1_3;
-		break;
-	case 4:
-		revision = IMX_CHIP_REVISION_1_4;
-		break;
-	case 5:
-		/*
-		 * i.MX6DQ TO1.5 is defined as Rev 1.3 in Data Sheet, marked
-		 * as 'D' in Part Number last character.
-		 */
-		revision = IMX_CHIP_REVISION_1_5;
-		break;
-	default:
+	/*
+	 * On i.MX7D digprog value match linux version format, so
+	 * it needn't map again and we can use register value directly.
+	 */
+	if (of_device_is_compatible(np, "fsl,imx7d-anatop")) {
+		revision = digprog & 0xff;
+	} else {
 		/*
-		 * Fail back to return raw register value instead of 0xff.
-		 * It will be easy to know version information in SOC if it
-		 * can't be recognized by known version. And some chip's (i.MX7D)
-		 * digprog value match linux version format, so it needn't map
-		 * again and we can use register value directly.
+		 * MAJOR: [15:8], the major silicon revison;
+		 * MINOR: [7: 0], the minor silicon revison;
+		 *
+		 * please refer to the i.MX RM for the detailed
+		 * silicon revison bit define.
+		 * format the major part and minor part to match the
+		 * linux kernel soc version format.
 		 */
-		revision = digprog & 0xff;
+		major_part = (digprog >> 8) & 0xf;
+		minor_part = digprog & 0xf;
+		revision = ((major_part + 1) << 4) | minor_part;
 	}
 
 	mxc_set_cpu_type(digprog >> 16 & 0xff);
diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c
index 1afccae0420c..c0434a36687a 100644
--- a/arch/arm/mach-imx/avic.c
+++ b/arch/arm/mach-imx/avic.c
@@ -22,6 +22,7 @@
 #include <linux/irqdomain.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <asm/mach/irq.h>
 #include <asm/exception.h>
 
@@ -51,7 +52,12 @@
 
 #define AVIC_NUM_IRQS 64
 
+/* low power interrupt mask registers */
+#define MX25_CCM_LPIMR0	0x68
+#define MX25_CCM_LPIMR1	0x6C
+
 static void __iomem *avic_base;
+static void __iomem *mx25_ccm_base;
 static struct irq_domain *domain;
 
 #ifdef CONFIG_FIQ
@@ -93,6 +99,18 @@ static void avic_irq_suspend(struct irq_data *d)
 
 	avic_saved_mask_reg[idx] = imx_readl(avic_base + ct->regs.mask);
 	imx_writel(gc->wake_active, avic_base + ct->regs.mask);
+
+	if (mx25_ccm_base) {
+		u8 offs = d->hwirq < AVIC_NUM_IRQS / 2 ?
+			MX25_CCM_LPIMR0 : MX25_CCM_LPIMR1;
+		/*
+		 * The interrupts which are still enabled will be used as wakeup
+		 * sources. Allow those interrupts in low-power mode.
+		 * The LPIMR registers use 0 to allow an interrupt, the AVIC
+		 * registers use 1.
+		 */
+		imx_writel(~gc->wake_active, mx25_ccm_base + offs);
+	}
 }
 
 static void avic_irq_resume(struct irq_data *d)
@@ -102,6 +120,13 @@ static void avic_irq_resume(struct irq_data *d)
 	int idx = d->hwirq >> 5;
 
 	imx_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask);
+
+	if (mx25_ccm_base) {
+		u8 offs = d->hwirq < AVIC_NUM_IRQS / 2 ?
+			MX25_CCM_LPIMR0 : MX25_CCM_LPIMR1;
+
+		imx_writel(0xffffffff, mx25_ccm_base + offs);
+	}
 }
 
 #else
@@ -158,6 +183,18 @@ void __init mxc_init_irq(void __iomem *irqbase)
 
 	avic_base = irqbase;
 
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx25-ccm");
+	mx25_ccm_base = of_iomap(np, 0);
+
+	if (mx25_ccm_base) {
+		/*
+		 * By default, we mask all interrupts. We set the actual mask
+		 * before we go into low-power mode.
+		 */
+		imx_writel(0xffffffff, mx25_ccm_base + MX25_CCM_LPIMR0);
+		imx_writel(0xffffffff, mx25_ccm_base + MX25_CCM_LPIMR1);
+	}
+
 	/* put the AVIC into the reset value with
 	 * all interrupts disabled
 	 */
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index d4e55f2a897e..32969f34486a 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -135,6 +135,9 @@ struct device * __init imx_soc_device_init(void)
 	case MXC_CPU_IMX6ULL:
 		soc_id = "i.MX6ULL";
 		break;
+	case MXC_CPU_IMX6SLL:
+		soc_id = "i.MX6SLL";
+		break;
 	case MXC_CPU_IMX7D:
 		soc_id = "i.MX7D";
 		break;
diff --git a/arch/arm/mach-imx/cpuidle-imx6sl.c b/arch/arm/mach-imx/cpuidle-imx6sl.c
index 8d866fb674a8..fa8ead145d17 100644
--- a/arch/arm/mach-imx/cpuidle-imx6sl.c
+++ b/arch/arm/mach-imx/cpuidle-imx6sl.c
@@ -12,6 +12,7 @@
 
 #include "common.h"
 #include "cpuidle.h"
+#include "hardware.h"
 
 static int imx6sl_enter_wait(struct cpuidle_device *dev,
 			    struct cpuidle_driver *drv, int index)
@@ -21,9 +22,11 @@ static int imx6sl_enter_wait(struct cpuidle_device *dev,
 	 * Software workaround for ERR005311, see function
 	 * description for details.
 	 */
-	imx6sl_set_wait_clk(true);
+	if (cpu_is_imx6sl())
+		imx6sl_set_wait_clk(true);
 	cpu_do_idle();
-	imx6sl_set_wait_clk(false);
+	if (cpu_is_imx6sl())
+		imx6sl_set_wait_clk(false);
 	imx6_set_lpm(WAIT_CLOCKED);
 
 	return index;
diff --git a/arch/arm/mach-imx/cpuidle-imx6sx.c b/arch/arm/mach-imx/cpuidle-imx6sx.c
index c5a5c3a70ab1..d0f14b761ff7 100644
--- a/arch/arm/mach-imx/cpuidle-imx6sx.c
+++ b/arch/arm/mach-imx/cpuidle-imx6sx.c
@@ -89,6 +89,7 @@ static struct cpuidle_driver imx6sx_cpuidle_driver = {
 			 */
 			.exit_latency = 300,
 			.target_residency = 500,
+			.flags = CPUIDLE_FLAG_TIMER_STOP,
 			.enter = imx6sx_enter_wait,
 			.name = "LOW-POWER-IDLE",
 			.desc = "ARM power off",
diff --git a/arch/arm/mach-imx/epit.c b/arch/arm/mach-imx/epit.c
deleted file mode 100644
index fb9a73a57d00..000000000000
--- a/arch/arm/mach-imx/epit.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- *  linux/arch/arm/plat-mxc/epit.c
- *
- *  Copyright (C) 2010 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#define EPITCR		0x00
-#define EPITSR		0x04
-#define EPITLR		0x08
-#define EPITCMPR	0x0c
-#define EPITCNR		0x10
-
-#define EPITCR_EN			(1 << 0)
-#define EPITCR_ENMOD			(1 << 1)
-#define EPITCR_OCIEN			(1 << 2)
-#define EPITCR_RLD			(1 << 3)
-#define EPITCR_PRESC(x)			(((x) & 0xfff) << 4)
-#define EPITCR_SWR			(1 << 16)
-#define EPITCR_IOVW			(1 << 17)
-#define EPITCR_DBGEN			(1 << 18)
-#define EPITCR_WAITEN			(1 << 19)
-#define EPITCR_RES			(1 << 20)
-#define EPITCR_STOPEN			(1 << 21)
-#define EPITCR_OM_DISCON		(0 << 22)
-#define EPITCR_OM_TOGGLE		(1 << 22)
-#define EPITCR_OM_CLEAR			(2 << 22)
-#define EPITCR_OM_SET			(3 << 22)
-#define EPITCR_CLKSRC_OFF		(0 << 24)
-#define EPITCR_CLKSRC_PERIPHERAL	(1 << 24)
-#define EPITCR_CLKSRC_REF_HIGH		(1 << 24)
-#define EPITCR_CLKSRC_REF_LOW		(3 << 24)
-
-#define EPITSR_OCIF			(1 << 0)
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "hardware.h"
-
-static struct clock_event_device clockevent_epit;
-
-static void __iomem *timer_base;
-
-static inline void epit_irq_disable(void)
-{
-	u32 val;
-
-	val = imx_readl(timer_base + EPITCR);
-	val &= ~EPITCR_OCIEN;
-	imx_writel(val, timer_base + EPITCR);
-}
-
-static inline void epit_irq_enable(void)
-{
-	u32 val;
-
-	val = imx_readl(timer_base + EPITCR);
-	val |= EPITCR_OCIEN;
-	imx_writel(val, timer_base + EPITCR);
-}
-
-static void epit_irq_acknowledge(void)
-{
-	imx_writel(EPITSR_OCIF, timer_base + EPITSR);
-}
-
-static int __init epit_clocksource_init(struct clk *timer_clk)
-{
-	unsigned int c = clk_get_rate(timer_clk);
-
-	return clocksource_mmio_init(timer_base + EPITCNR, "epit", c, 200, 32,
-			clocksource_mmio_readl_down);
-}
-
-/* clock event */
-
-static int epit_set_next_event(unsigned long evt,
-			      struct clock_event_device *unused)
-{
-	unsigned long tcmp;
-
-	tcmp = imx_readl(timer_base + EPITCNR);
-
-	imx_writel(tcmp - evt, timer_base + EPITCMPR);
-
-	return 0;
-}
-
-/* Left event sources disabled, no more interrupts appear */
-static int epit_shutdown(struct clock_event_device *evt)
-{
-	unsigned long flags;
-
-	/*
-	 * The timer interrupt generation is disabled at least
-	 * for enough time to call epit_set_next_event()
-	 */
-	local_irq_save(flags);
-
-	/* Disable interrupt in GPT module */
-	epit_irq_disable();
-
-	/* Clear pending interrupt */
-	epit_irq_acknowledge();
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static int epit_set_oneshot(struct clock_event_device *evt)
-{
-	unsigned long flags;
-
-	/*
-	 * The timer interrupt generation is disabled at least
-	 * for enough time to call epit_set_next_event()
-	 */
-	local_irq_save(flags);
-
-	/* Disable interrupt in GPT module */
-	epit_irq_disable();
-
-	/* Clear pending interrupt, only while switching mode */
-	if (!clockevent_state_oneshot(evt))
-		epit_irq_acknowledge();
-
-	/*
-	 * Do not put overhead of interrupt enable/disable into
-	 * epit_set_next_event(), the core has about 4 minutes
-	 * to call epit_set_next_event() or shutdown clock after
-	 * mode switching
-	 */
-	epit_irq_enable();
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t epit_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &clockevent_epit;
-
-	epit_irq_acknowledge();
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction epit_timer_irq = {
-	.name		= "i.MX EPIT Timer Tick",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= epit_timer_interrupt,
-};
-
-static struct clock_event_device clockevent_epit = {
-	.name			= "epit",
-	.features		= CLOCK_EVT_FEAT_ONESHOT,
-	.set_state_shutdown	= epit_shutdown,
-	.tick_resume		= epit_shutdown,
-	.set_state_oneshot	= epit_set_oneshot,
-	.set_next_event		= epit_set_next_event,
-	.rating			= 200,
-};
-
-static int __init epit_clockevent_init(struct clk *timer_clk)
-{
-	clockevent_epit.cpumask = cpumask_of(0);
-	clockevents_config_and_register(&clockevent_epit,
-					clk_get_rate(timer_clk),
-					0x800, 0xfffffffe);
-
-	return 0;
-}
-
-void __init epit_timer_init(void __iomem *base, int irq)
-{
-	struct clk *timer_clk;
-
-	timer_clk = clk_get_sys("imx-epit.0", NULL);
-	if (IS_ERR(timer_clk)) {
-		pr_err("i.MX epit: unable to get clk\n");
-		return;
-	}
-
-	clk_prepare_enable(timer_clk);
-
-	timer_base = base;
-
-	/*
-	 * Initialise to a known state (all timers off, and timing reset)
-	 */
-	imx_writel(0x0, timer_base + EPITCR);
-
-	imx_writel(0xffffffff, timer_base + EPITLR);
-	imx_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN,
-		   timer_base + EPITCR);
-
-	/* init and register the timer to the framework */
-	epit_clocksource_init(timer_clk);
-	epit_clockevent_init(timer_clk);
-
-	/* Make irqs happen */
-	setup_irq(irq, &epit_timer_irq);
-}
diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c
index 04084900d810..c7a1ef180dda 100644
--- a/arch/arm/mach-imx/mach-imx6sl.c
+++ b/arch/arm/mach-imx/mach-imx6sl.c
@@ -18,6 +18,7 @@
 
 #include "common.h"
 #include "cpuidle.h"
+#include "hardware.h"
 
 static void __init imx6sl_fec_init(void)
 {
@@ -54,7 +55,8 @@ static void __init imx6sl_init_machine(void)
 
 	of_platform_default_populate(NULL, NULL, parent);
 
-	imx6sl_fec_init();
+	if (cpu_is_imx6sl())
+		imx6sl_fec_init();
 	imx_anatop_init();
 	imx6sl_pm_init();
 }
@@ -66,11 +68,15 @@ static void __init imx6sl_init_irq(void)
 	imx_init_l2cache();
 	imx_src_init();
 	irqchip_init();
-	imx6_pm_ccm_init("fsl,imx6sl-ccm");
+	if (cpu_is_imx6sl())
+		imx6_pm_ccm_init("fsl,imx6sl-ccm");
+	else
+		imx6_pm_ccm_init("fsl,imx6sll-ccm");
 }
 
 static const char * const imx6sl_dt_compat[] __initconst = {
 	"fsl,imx6sl",
+	"fsl,imx6sll",
 	NULL,
 };
 
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index e00d6260c3df..026e2ca45f1e 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -40,6 +40,7 @@
 #define MXC_CPU_IMX6Q		0x63
 #define MXC_CPU_IMX6UL		0x64
 #define MXC_CPU_IMX6ULL		0x65
+#define MXC_CPU_IMX6SLL		0x67
 #define MXC_CPU_IMX7D		0x72
 
 #define IMX_DDR_TYPE_LPDDR2		1
@@ -79,6 +80,11 @@ static inline bool cpu_is_imx6ull(void)
 	return __mxc_cpu_type == MXC_CPU_IMX6ULL;
 }
 
+static inline bool cpu_is_imx6sll(void)
+{
+	return __mxc_cpu_type == MXC_CPU_IMX6SLL;
+}
+
 static inline bool cpu_is_imx6q(void)
 {
 	return __mxc_cpu_type == MXC_CPU_IMX6Q;
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index ecdf071653d4..017539dd712b 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -428,10 +428,8 @@ static int __init imx6_pm_get_base(struct imx6_pm_base *base,
 	int ret = 0;
 
 	node = of_find_compatible_node(NULL, NULL, compat);
-	if (!node) {
-		ret = -ENODEV;
-		goto out;
-	}
+	if (!node)
+		return -ENODEV;
 
 	ret = of_address_to_resource(node, 0, &res);
 	if (ret)
@@ -444,7 +442,6 @@ static int __init imx6_pm_get_base(struct imx6_pm_base *base,
 
 put_node:
 	of_node_put(node);
-out:
 	return ret;
 }
 
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index d2283009a5ff..6c2ebf01893a 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -172,10 +172,8 @@ static struct mtd_partition aspenite_nand_partitions[] = {
 };
 
 static struct pxa3xx_nand_platform_data aspenite_nand_info = {
-	.enable_arbiter	= 1,
-	.num_cs = 1,
-	.parts[0]	= aspenite_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(aspenite_nand_partitions),
+	.parts		= aspenite_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(aspenite_nand_partitions),
 };
 
 static struct i2c_board_info aspenite_i2c_info[] __initdata = {
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index d90c74fa614d..c7897fb2b6da 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -178,11 +178,8 @@ static struct mv_usb_platform_data ttc_usb_pdata = {
 #endif
 #endif
 
-#if IS_ENABLED(CONFIG_MTD_NAND_PXA3xx)
-static struct pxa3xx_nand_platform_data dkb_nand_info = {
-	.enable_arbiter = 1,
-	.num_cs = 1,
-};
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
+static struct pxa3xx_nand_platform_data dkb_nand_info = {};
 #endif
 
 #if IS_ENABLED(CONFIG_MMP_DISP)
@@ -275,7 +272,7 @@ static void __init ttc_dkb_init(void)
 
 	/* on-chip devices */
 	pxa910_add_uart(1);
-#if IS_ENABLED(CONFIG_MTD_NAND_PXA3xx)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
 	pxa910_add_nand(&dkb_nand_info);
 #endif
 
diff --git a/arch/arm/mach-npcm/Kconfig b/arch/arm/mach-npcm/Kconfig
new file mode 100644
index 000000000000..684c9c9a32bd
--- /dev/null
+++ b/arch/arm/mach-npcm/Kconfig
@@ -0,0 +1,30 @@
+menuconfig ARCH_NPCM
+	bool "Nuvoton NPCM Architecture"
+	depends on ARCH_MULTI_V7
+	select PINCTRL
+
+if ARCH_NPCM
+
+config ARCH_NPCM7XX
+	bool "Support for NPCM7xx BMC (Poleg)"
+	depends on ARCH_MULTI_V7
+	select PINCTRL_NPCM7XX
+	select NPCM7XX_TIMER
+	select ARCH_REQUIRE_GPIOLIB
+	select CACHE_L2X0
+	select ARM_GIC
+	select HAVE_ARM_TWD if SMP
+	select HAVE_ARM_SCU if SMP
+	select ARM_ERRATA_764369 if SMP
+	select ARM_ERRATA_720789
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_794072
+	select PL310_ERRATA_588369
+	select PL310_ERRATA_727915
+	select MFD_SYSCON
+	help
+	  General support for NPCM7xx BMC (Poleg).
+
+	  Nuvoton NPCM7xx BMC based on the Cortex A9.
+
+endif
diff --git a/arch/arm/mach-npcm/Makefile b/arch/arm/mach-npcm/Makefile
new file mode 100644
index 000000000000..f5f67201419f
--- /dev/null
+++ b/arch/arm/mach-npcm/Makefile
@@ -0,0 +1,4 @@
+AFLAGS_headsmp.o		+= -march=armv7-a
+
+obj-$(CONFIG_ARCH_NPCM7XX)	+= npcm7xx.o
+obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
diff --git a/arch/arm/mach-npcm/headsmp.S b/arch/arm/mach-npcm/headsmp.S
new file mode 100644
index 000000000000..c083fe09a07b
--- /dev/null
+++ b/arch/arm/mach-npcm/headsmp.S
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology corporation.
+// Copyright 2018 Google, Inc.
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+
+/*
+ * The boot ROM does not start secondary CPUs in SVC mode, so we need to do that
+ * here.
+ */
+ENTRY(npcm7xx_secondary_startup)
+	safe_svcmode_maskall r0
+
+	b	secondary_startup
+ENDPROC(npcm7xx_secondary_startup)
diff --git a/arch/arm/mach-npcm/npcm7xx.c b/arch/arm/mach-npcm/npcm7xx.c
new file mode 100644
index 000000000000..5f7cd88103ef
--- /dev/null
+++ b/arch/arm/mach-npcm/npcm7xx.c
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology corporation.
+// Copyright 2018 Google, Inc.
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/cache-l2x0.h>
+
+static const char *const npcm7xx_dt_match[] = {
+	"nuvoton,npcm750",
+	NULL
+};
+
+DT_MACHINE_START(NPCM7XX_DT, "NPCM7XX Chip family")
+	.atag_offset	= 0x100,
+	.dt_compat	= npcm7xx_dt_match,
+MACHINE_END
diff --git a/arch/arm/mach-npcm/platsmp.c b/arch/arm/mach-npcm/platsmp.c
new file mode 100644
index 000000000000..21633c70fe7f
--- /dev/null
+++ b/arch/arm/mach-npcm/platsmp.c
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology corporation.
+// Copyright 2018 Google, Inc.
+
+#define pr_fmt(fmt) "nuvoton,npcm7xx-smp: " fmt
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <asm/cacheflush.h>
+#include <asm/smp.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+
+#define NPCM7XX_SCRPAD_REG 0x13c
+
+extern void npcm7xx_secondary_startup(void);
+
+static int npcm7xx_smp_boot_secondary(unsigned int cpu,
+				      struct task_struct *idle)
+{
+	struct device_node *gcr_np;
+	void __iomem *gcr_base;
+	int ret = 0;
+
+	gcr_np = of_find_compatible_node(NULL, NULL, "nuvoton,npcm750-gcr");
+	if (!gcr_np) {
+		pr_err("no gcr device node\n");
+		ret = -ENODEV;
+		goto out;
+	}
+	gcr_base = of_iomap(gcr_np, 0);
+	if (!gcr_base) {
+		pr_err("could not iomap gcr");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* give boot ROM kernel start address. */
+	iowrite32(__pa_symbol(npcm7xx_secondary_startup), gcr_base +
+		  NPCM7XX_SCRPAD_REG);
+	/* make sure the previous write is seen by all observers. */
+	dsb_sev();
+
+	iounmap(gcr_base);
+out:
+	return ret;
+}
+
+static void __init npcm7xx_smp_prepare_cpus(unsigned int max_cpus)
+{
+	struct device_node *scu_np;
+	void __iomem *scu_base;
+
+	scu_np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+	if (!scu_np) {
+		pr_err("no scu device node\n");
+		return;
+	}
+	scu_base = of_iomap(scu_np, 0);
+	if (!scu_base) {
+		pr_err("could not iomap scu");
+		return;
+	}
+
+	scu_enable(scu_base);
+
+	iounmap(scu_base);
+}
+
+static struct smp_operations npcm7xx_smp_ops __initdata = {
+	.smp_prepare_cpus = npcm7xx_smp_prepare_cpus,
+	.smp_boot_secondary = npcm7xx_smp_boot_secondary,
+};
+
+CPU_METHOD_OF_DECLARE(npcm7xx_smp, "nuvoton,npcm750-smp", &npcm7xx_smp_ops);
diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c
index f0808fcc5acc..8584cdd1c827 100644
--- a/arch/arm/mach-nspire/nspire.c
+++ b/arch/arm/mach-nspire/nspire.c
@@ -33,11 +33,6 @@ static const char *const nspire_dt_match[] __initconst = {
 	NULL,
 };
 
-static void __init nspire_map_io(void)
-{
-	debug_ll_io_init();
-}
-
 static struct clcd_board nspire_clcd_data = {
 	.name		= "LCD",
 	.caps		= CLCD_CAP_5551 | CLCD_CAP_565,
@@ -71,7 +66,6 @@ static void nspire_restart(enum reboot_mode mode, const char *cmd)
 
 DT_MACHINE_START(NSPIRE, "TI-NSPIRE")
 	.dt_compat	= nspire_dt_match,
-	.map_io		= nspire_map_io,
 	.init_machine	= nspire_init,
 	.restart	= nspire_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 45c6b733c881..c4694f26b5c4 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -30,6 +30,7 @@ config ARCH_OMAP16XX
 	bool "OMAP16xx Based System"
 	select ARCH_OMAP_OTG
 	select CPU_ARM926T
+	select OMAP_DM_TIMER
 
 config OMAP_MUX
 	bool "OMAP multiplexing support"
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index 65bb6e8085de..d83ff257eaa8 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -32,11 +32,10 @@
 
 #include <asm/exception.h>
 
-#include <plat/i2c.h>
-
 #include <mach/irqs.h>
 
 #include "soc.h"
+#include "i2c.h"
 
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 void omap7xx_map_io(void);
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
index 32f6c53367bf..5bdf3c4190f9 100644
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@@ -24,8 +24,6 @@
 #include <mach/mux.h>
 #include "soc.h"
 
-#include <plat/i2c.h>
-
 #define OMAP_I2C_SIZE		0x3f
 #define OMAP1_I2C_BASE		0xfffb3800
 
diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/mach-omap1/i2c.h
index 810629d79668..54a2bce7879e 100644
--- a/arch/arm/plat-omap/include/plat/i2c.h
+++ b/arch/arm/mach-omap1/i2c.h
@@ -19,8 +19,8 @@
  *
  */
 
-#ifndef __PLAT_OMAP_I2C_H
-#define __PLAT_OMAP_I2C_H
+#ifndef __ARCH_ARM_MACH_OMAP1_I2C_H
+#define __ARCH_ARM_MACH_OMAP1_I2C_H
 
 struct i2c_board_info;
 struct omap_i2c_bus_platform_data;
@@ -47,7 +47,4 @@ static inline int omap_register_i2c_bus_cmdline(void)
 }
 #endif
 
-struct omap_hwmod;
-int omap_i2c_reset(struct omap_hwmod *oh);
-
-#endif /* __PLAT_OMAP_I2C_H */
+#endif /* __ARCH_ARM_MACH_OMAP1_I2C_H */
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index f1135bf8940e..3e1de14805e4 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -55,7 +55,7 @@
 #include <mach/tc.h>
 #include <mach/mux.h>
 #include <linux/omap-dma.h>
-#include <plat/dmtimer.h>
+#include <clocksource/timer-ti-dm.h>
 
 #include <mach/irqs.h>
 
diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c
index 8fb1ec6fa999..4447210c9b0d 100644
--- a/arch/arm/mach-omap1/timer.c
+++ b/arch/arm/mach-omap1/timer.c
@@ -27,7 +27,7 @@
 #include <linux/platform_device.h>
 #include <linux/platform_data/dmtimer-omap.h>
 
-#include <plat/dmtimer.h>
+#include <clocksource/timer-ti-dm.h>
 
 #include "soc.h"
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 00b1f17f8d44..9f27b486a536 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -72,6 +72,7 @@ config SOC_AM43XX
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
 	select OMAP_INTERCONNECT
+	select ARM_CPU_SUSPEND if PM
 
 config SOC_DRA7XX
 	bool "TI DRA7XX"
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index c15bbcad5f67..4603c30fef73 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -88,6 +88,8 @@ omap-4-5-pm-common			+= pm44xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-4-5-pm-common)
 obj-$(CONFIG_SOC_OMAP5)			+= $(omap-4-5-pm-common)
 obj-$(CONFIG_SOC_DRA7XX)		+= $(omap-4-5-pm-common)
+obj-$(CONFIG_SOC_AM33XX)		+= pm33xx-core.o sleep33xx.o
+obj-$(CONFIG_SOC_AM43XX)		+= pm33xx-core.o sleep43xx.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 
 obj-$(CONFIG_POWER_AVS_OMAP)		+= sr_device.o
@@ -95,6 +97,8 @@ obj-$(CONFIG_POWER_AVS_OMAP_CLASS3)    += smartreflex-class3.o
 
 AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
 AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a$(plus_sec)
+AFLAGS_sleep33xx.o			:=-Wa,-march=armv7-a$(plus_sec)
+AFLAGS_sleep43xx.o			:=-Wa,-march=armv7-a$(plus_sec)
 
 endif
 
@@ -232,3 +236,15 @@ obj-y					+= $(omap-hsmmc-m) $(omap-hsmmc-y)
 obj-y					+= omap_phy_internal.o
 
 obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
+
+arch/arm/mach-omap2/pm-asm-offsets.s: arch/arm/mach-omap2/pm-asm-offsets.c
+	$(call if_changed_dep,cc_s_c)
+
+include/generated/ti-pm-asm-offsets.h: arch/arm/mach-omap2/pm-asm-offsets.s FORCE
+	$(call filechk,offsets,__TI_PM_ASM_OFFSETS_H__)
+
+# For rule to generate ti-emif-asm-offsets.h dependency
+include drivers/memory/Makefile.asm-offsets
+
+arch/arm/mach-omap2/sleep33xx.o: include/generated/ti-pm-asm-offsets.h include/generated/ti-emif-asm-offsets.h
+arch/arm/mach-omap2/sleep43xx.o: include/generated/ti-pm-asm-offsets.h include/generated/ti-emif-asm-offsets.h
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 20f25539d572..75bc18646df6 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -566,11 +566,11 @@ static int n8x0_menelaus_late_init(struct device *dev)
 }
 #endif
 
-struct menelaus_platform_data n8x0_menelaus_platform_data __initdata = {
+struct menelaus_platform_data n8x0_menelaus_platform_data = {
 	.late_init = n8x0_menelaus_late_init,
 };
 
-struct aic3x_pdata n810_aic33_data __initdata = {
+struct aic3x_pdata n810_aic33_data = {
 	.gpio_reset = 118,
 };
 
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index bc202835371b..fbe0b78bf489 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -77,6 +77,13 @@ static inline int omap4_pm_init_early(void)
 }
 #endif
 
+#if defined(CONFIG_PM) && (defined(CONFIG_SOC_AM33XX) || \
+	defined(CONFIG_SOC_AM43XX))
+void amx3_common_pm_init(void);
+#else
+static inline void amx3_common_pm_init(void) { }
+#endif
+
 extern void omap2_init_common_infrastructure(void);
 
 extern void omap_init_time(void);
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index bd8089ff929f..180da403639e 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -623,6 +623,7 @@ void __init omap3_ctrl_init(void)
 
 struct control_init_data {
 	int index;
+	void __iomem *mem;
 	s16 offset;
 };
 
@@ -635,6 +636,10 @@ static const struct control_init_data omap2_ctrl_data = {
 	.offset = -OMAP2_CONTROL_GENERAL,
 };
 
+static const struct control_init_data ctrl_aux_data = {
+	.index = TI_CLKM_CTRL_AUX,
+};
+
 static const struct of_device_id omap_scrm_dt_match_table[] = {
 	{ .compatible = "ti,am3-scm", .data = &ctrl_data },
 	{ .compatible = "ti,am4-scm", .data = &ctrl_data },
@@ -644,6 +649,7 @@ static const struct of_device_id omap_scrm_dt_match_table[] = {
 	{ .compatible = "ti,dm816-scrm", .data = &ctrl_data },
 	{ .compatible = "ti,omap4-scm-core", .data = &ctrl_data },
 	{ .compatible = "ti,omap5-scm-core", .data = &ctrl_data },
+	{ .compatible = "ti,omap5-scm-wkup-pad-conf", .data = &ctrl_aux_data },
 	{ .compatible = "ti,dra7-scm-core", .data = &ctrl_data },
 	{ }
 };
@@ -660,15 +666,21 @@ int __init omap2_control_base_init(void)
 	struct device_node *np;
 	const struct of_device_id *match;
 	struct control_init_data *data;
+	void __iomem *mem;
 
 	for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
 		data = (struct control_init_data *)match->data;
 
-		omap2_ctrl_base = of_iomap(np, 0);
-		if (!omap2_ctrl_base)
+		mem = of_iomap(np, 0);
+		if (!mem)
 			return -ENOMEM;
 
-		omap2_ctrl_offset = data->offset;
+		if (data->index == TI_CLKM_CTRL) {
+			omap2_ctrl_base = mem;
+			omap2_ctrl_offset = data->offset;
+		}
+
+		data->mem = mem;
 	}
 
 	return 0;
@@ -713,7 +725,7 @@ int __init omap_control_init(void)
 		} else {
 			/* No scm_conf found, direct access */
 			ret = omap2_clk_provider_init(np, data->index, NULL,
-						      omap2_ctrl_base);
+						      data->mem);
 			if (ret)
 				return ret;
 		}
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 93057fb65f44..ed6f074ea672 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -8,7 +8,7 @@
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */
-#include <linux/gpio.h>
+
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 6d28aa20a7d3..b064066d431c 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -13,9 +13,7 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
 #include <linux/mmc/host.h>
-#include <linux/platform_data/gpio-omap.h>
 #include <linux/platform_data/hsmmc-omap.h>
 
 #include "soc.h"
diff --git a/arch/arm/mach-omap2/i2c.h b/arch/arm/mach-omap2/i2c.h
index 42b6f2e7d190..4d085c7ad425 100644
--- a/arch/arm/mach-omap2/i2c.h
+++ b/arch/arm/mach-omap2/i2c.h
@@ -19,23 +19,10 @@
  *
  */
 
-#include <plat/i2c.h>
-
 #ifndef __MACH_OMAP2_I2C_H
 #define __MACH_OMAP2_I2C_H
 
-/**
- * i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod
- * @fifo_depth: total controller FIFO size (in bytes)
- * @flags: differences in hardware support capability
- *
- * @fifo_depth represents what exists on the hardware, not what is
- * actually configured at runtime by the device driver.
- */
-struct omap_i2c_dev_attr {
-	u8	fifo_depth;
-	u32	flags;
-};
+struct omap_hwmod;
 
 int omap_i2c_reset(struct omap_hwmod *oh);
 
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index cb5d7314cf99..cf546dfe3b32 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -622,6 +622,7 @@ void __init am33xx_init_early(void)
 void __init am33xx_init_late(void)
 {
 	omap_common_late_init();
+	amx3_common_pm_init();
 }
 #endif
 
@@ -646,6 +647,7 @@ void __init am43xx_init_late(void)
 {
 	omap_common_late_init();
 	omap2_clk_enable_autoidle_all();
+	amx3_common_pm_init();
 }
 #endif
 
diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c
index 5a3bc3de58d0..978fba722b82 100644
--- a/arch/arm/mach-omap2/msdi.c
+++ b/arch/arm/mach-omap2/msdi.c
@@ -23,7 +23,6 @@
 
 #include <linux/kernel.h>
 #include <linux/err.h>
-#include <linux/platform_data/gpio-omap.h>
 
 #include "prm.h"
 #include "common.h"
diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h
index 5b2966a0f733..9fc4e2643ce7 100644
--- a/arch/arm/mach-omap2/omap4-sar-layout.h
+++ b/arch/arm/mach-omap2/omap4-sar-layout.h
@@ -28,7 +28,7 @@
 #define L2X0_AUXCTRL_OFFSET			0xff8
 #define L2X0_PREFETCH_CTRL_OFFSET		0xffc
 
-/* CPUx Wakeup Non-Secure Physical Address offsets in SAR_BANK3 */
+/* CPUx Wakeup Non-Secure Physical Address offsets in SAR_BANK1 */
 #define CPU0_WAKEUP_NS_PA_ADDR_OFFSET		0xa04
 #define CPU1_WAKEUP_NS_PA_ADDR_OFFSET		0xa08
 #define OMAP5_CPU0_WAKEUP_NS_PA_ADDR_OFFSET	0xe00
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index f0388058b7da..3b829a50d1db 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -140,6 +140,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
 	struct omap_device *od;
 	struct omap_hwmod *oh;
 	struct device_node *node = pdev->dev.of_node;
+	struct resource res;
 	const char *oh_name;
 	int oh_cnt, i, ret = 0;
 	bool device_active = false;
@@ -150,6 +151,10 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	/* Use ti-sysc driver instead of omap_device? */
+	if (!omap_hwmod_parse_module_range(NULL, node, &res))
+		return -ENODEV;
+
 	hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL);
 	if (!hwmods) {
 		ret = -ENOMEM;
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 34156eca8e23..e7d23e200ecc 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -145,6 +145,8 @@
 
 #include <linux/platform_data/ti-sysc.h>
 
+#include <dt-bindings/bus/ti-sysc.h>
+
 #include <asm/system_misc.h>
 
 #include "clock.h"
@@ -2498,7 +2500,7 @@ static void __init _setup_postsetup(struct omap_hwmod *oh)
  * affects the IP block hardware, or system integration hardware
  * associated with the IP block.  Returns 0.
  */
-static int __init _setup(struct omap_hwmod *oh, void *data)
+static int _setup(struct omap_hwmod *oh, void *data)
 {
 	if (oh->_state != _HWMOD_STATE_INITIALIZED)
 		return 0;
@@ -3060,6 +3062,414 @@ int __init omap_hwmod_setup_one(const char *oh_name)
 	return 0;
 }
 
+static void omap_hwmod_check_one(struct device *dev,
+				 const char *name, s8 v1, u8 v2)
+{
+	if (v1 < 0)
+		return;
+
+	if (v1 != v2)
+		dev_warn(dev, "%s %d != %d\n", name, v1, v2);
+}
+
+/**
+ * omap_hwmod_check_sysc - check sysc against platform sysc
+ * @dev: struct device
+ * @data: module data
+ * @sysc_fields: new sysc configuration
+ */
+static int omap_hwmod_check_sysc(struct device *dev,
+				 const struct ti_sysc_module_data *data,
+				 struct sysc_regbits *sysc_fields)
+{
+	const struct sysc_regbits *regbits = data->cap->regbits;
+
+	omap_hwmod_check_one(dev, "dmadisable_shift",
+			     regbits->dmadisable_shift,
+			     sysc_fields->dmadisable_shift);
+	omap_hwmod_check_one(dev, "midle_shift",
+			     regbits->midle_shift,
+			     sysc_fields->midle_shift);
+	omap_hwmod_check_one(dev, "sidle_shift",
+			     regbits->sidle_shift,
+			     sysc_fields->sidle_shift);
+	omap_hwmod_check_one(dev, "clkact_shift",
+			     regbits->clkact_shift,
+			     sysc_fields->clkact_shift);
+	omap_hwmod_check_one(dev, "enwkup_shift",
+			     regbits->enwkup_shift,
+			     sysc_fields->enwkup_shift);
+	omap_hwmod_check_one(dev, "srst_shift",
+			     regbits->srst_shift,
+			     sysc_fields->srst_shift);
+	omap_hwmod_check_one(dev, "autoidle_shift",
+			     regbits->autoidle_shift,
+			     sysc_fields->autoidle_shift);
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_init_regbits - init sysconfig specific register bits
+ * @dev: struct device
+ * @data: module data
+ * @sysc_fields: new sysc configuration
+ */
+static int omap_hwmod_init_regbits(struct device *dev,
+				   const struct ti_sysc_module_data *data,
+				   struct sysc_regbits **sysc_fields)
+{
+	*sysc_fields = NULL;
+
+	switch (data->cap->type) {
+	case TI_SYSC_OMAP2:
+	case TI_SYSC_OMAP2_TIMER:
+		*sysc_fields = &omap_hwmod_sysc_type1;
+		break;
+	case TI_SYSC_OMAP3_SHAM:
+		*sysc_fields = &omap3_sham_sysc_fields;
+		break;
+	case TI_SYSC_OMAP3_AES:
+		*sysc_fields = &omap3xxx_aes_sysc_fields;
+		break;
+	case TI_SYSC_OMAP4:
+	case TI_SYSC_OMAP4_TIMER:
+		*sysc_fields = &omap_hwmod_sysc_type2;
+		break;
+	case TI_SYSC_OMAP4_SIMPLE:
+		*sysc_fields = &omap_hwmod_sysc_type3;
+		break;
+	case TI_SYSC_OMAP34XX_SR:
+		*sysc_fields = &omap34xx_sr_sysc_fields;
+		break;
+	case TI_SYSC_OMAP36XX_SR:
+		*sysc_fields = &omap36xx_sr_sysc_fields;
+		break;
+	case TI_SYSC_OMAP4_SR:
+		*sysc_fields = &omap36xx_sr_sysc_fields;
+		break;
+	case TI_SYSC_OMAP4_MCASP:
+		*sysc_fields = &omap_hwmod_sysc_type_mcasp;
+		break;
+	case TI_SYSC_OMAP4_USB_HOST_FS:
+		*sysc_fields = &omap_hwmod_sysc_type_usb_host_fs;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return omap_hwmod_check_sysc(dev, data, *sysc_fields);
+}
+
+/**
+ * omap_hwmod_init_reg_offs - initialize sysconfig register offsets
+ * @dev: struct device
+ * @data: module data
+ * @rev_offs: revision register offset
+ * @sysc_offs: sysc register offset
+ * @syss_offs: syss register offset
+ */
+int omap_hwmod_init_reg_offs(struct device *dev,
+			     const struct ti_sysc_module_data *data,
+			     u32 *rev_offs, u32 *sysc_offs, u32 *syss_offs)
+{
+	*rev_offs = 0;
+	*sysc_offs = 0;
+	*syss_offs = 0;
+
+	if (data->offsets[SYSC_REVISION] > 0)
+		*rev_offs = data->offsets[SYSC_REVISION];
+
+	if (data->offsets[SYSC_SYSCONFIG] > 0)
+		*sysc_offs = data->offsets[SYSC_SYSCONFIG];
+
+	if (data->offsets[SYSC_SYSSTATUS] > 0)
+		*syss_offs = data->offsets[SYSC_SYSSTATUS];
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_init_sysc_flags - initialize sysconfig features
+ * @dev: struct device
+ * @data: module data
+ * @sysc_flags: module configuration
+ */
+int omap_hwmod_init_sysc_flags(struct device *dev,
+			       const struct ti_sysc_module_data *data,
+			       u32 *sysc_flags)
+{
+	*sysc_flags = 0;
+
+	switch (data->cap->type) {
+	case TI_SYSC_OMAP2:
+	case TI_SYSC_OMAP2_TIMER:
+		/* See SYSC_OMAP2_* in include/dt-bindings/bus/ti-sysc.h */
+		if (data->cfg->sysc_val & SYSC_OMAP2_CLOCKACTIVITY)
+			*sysc_flags |= SYSC_HAS_CLOCKACTIVITY;
+		if (data->cfg->sysc_val & SYSC_OMAP2_EMUFREE)
+			*sysc_flags |= SYSC_HAS_EMUFREE;
+		if (data->cfg->sysc_val & SYSC_OMAP2_ENAWAKEUP)
+			*sysc_flags |= SYSC_HAS_ENAWAKEUP;
+		if (data->cfg->sysc_val & SYSC_OMAP2_SOFTRESET)
+			*sysc_flags |= SYSC_HAS_SOFTRESET;
+		if (data->cfg->sysc_val & SYSC_OMAP2_AUTOIDLE)
+			*sysc_flags |= SYSC_HAS_AUTOIDLE;
+		break;
+	case TI_SYSC_OMAP4:
+	case TI_SYSC_OMAP4_TIMER:
+		/* See SYSC_OMAP4_* in include/dt-bindings/bus/ti-sysc.h */
+		if (data->cfg->sysc_val & SYSC_OMAP4_DMADISABLE)
+			*sysc_flags |= SYSC_HAS_DMADISABLE;
+		if (data->cfg->sysc_val & SYSC_OMAP4_FREEEMU)
+			*sysc_flags |= SYSC_HAS_EMUFREE;
+		if (data->cfg->sysc_val & SYSC_OMAP4_SOFTRESET)
+			*sysc_flags |= SYSC_HAS_SOFTRESET;
+		break;
+	case TI_SYSC_OMAP34XX_SR:
+	case TI_SYSC_OMAP36XX_SR:
+		/* See SYSC_OMAP3_SR_* in include/dt-bindings/bus/ti-sysc.h */
+		if (data->cfg->sysc_val & SYSC_OMAP3_SR_ENAWAKEUP)
+			*sysc_flags |= SYSC_HAS_ENAWAKEUP;
+		break;
+	default:
+		if (data->cap->regbits->emufree_shift >= 0)
+			*sysc_flags |= SYSC_HAS_EMUFREE;
+		if (data->cap->regbits->enwkup_shift >= 0)
+			*sysc_flags |= SYSC_HAS_ENAWAKEUP;
+		if (data->cap->regbits->srst_shift >= 0)
+			*sysc_flags |= SYSC_HAS_SOFTRESET;
+		if (data->cap->regbits->autoidle_shift >= 0)
+			*sysc_flags |= SYSC_HAS_AUTOIDLE;
+		break;
+	}
+
+	if (data->cap->regbits->midle_shift >= 0 &&
+	    data->cfg->midlemodes)
+		*sysc_flags |= SYSC_HAS_MIDLEMODE;
+
+	if (data->cap->regbits->sidle_shift >= 0 &&
+	    data->cfg->sidlemodes)
+		*sysc_flags |= SYSC_HAS_SIDLEMODE;
+
+	if (data->cfg->quirks & SYSC_QUIRK_UNCACHED)
+		*sysc_flags |= SYSC_NO_CACHE;
+	if (data->cfg->quirks & SYSC_QUIRK_RESET_STATUS)
+		*sysc_flags |= SYSC_HAS_RESET_STATUS;
+
+	if (data->cfg->syss_mask & 1)
+		*sysc_flags |= SYSS_HAS_RESET_STATUS;
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_init_idlemodes - initialize module idle modes
+ * @dev: struct device
+ * @data: module data
+ * @idlemodes: module supported idle modes
+ */
+int omap_hwmod_init_idlemodes(struct device *dev,
+			      const struct ti_sysc_module_data *data,
+			      u32 *idlemodes)
+{
+	*idlemodes = 0;
+
+	if (data->cfg->midlemodes & BIT(SYSC_IDLE_FORCE))
+		*idlemodes |= MSTANDBY_FORCE;
+	if (data->cfg->midlemodes & BIT(SYSC_IDLE_NO))
+		*idlemodes |= MSTANDBY_NO;
+	if (data->cfg->midlemodes & BIT(SYSC_IDLE_SMART))
+		*idlemodes |= MSTANDBY_SMART;
+	if (data->cfg->midlemodes & BIT(SYSC_IDLE_SMART_WKUP))
+		*idlemodes |= MSTANDBY_SMART_WKUP;
+
+	if (data->cfg->sidlemodes & BIT(SYSC_IDLE_FORCE))
+		*idlemodes |= SIDLE_FORCE;
+	if (data->cfg->sidlemodes & BIT(SYSC_IDLE_NO))
+		*idlemodes |= SIDLE_NO;
+	if (data->cfg->sidlemodes & BIT(SYSC_IDLE_SMART))
+		*idlemodes |= SIDLE_SMART;
+	if (data->cfg->sidlemodes & BIT(SYSC_IDLE_SMART_WKUP))
+		*idlemodes |= SIDLE_SMART_WKUP;
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_check_module - check new module against platform data
+ * @dev: struct device
+ * @oh: module
+ * @data: new module data
+ * @sysc_fields: sysc register bits
+ * @rev_offs: revision register offset
+ * @sysc_offs: sysconfig register offset
+ * @syss_offs: sysstatus register offset
+ * @sysc_flags: sysc specific flags
+ * @idlemodes: sysc supported idlemodes
+ */
+static int omap_hwmod_check_module(struct device *dev,
+				   struct omap_hwmod *oh,
+				   const struct ti_sysc_module_data *data,
+				   struct sysc_regbits *sysc_fields,
+				   u32 rev_offs, u32 sysc_offs,
+				   u32 syss_offs, u32 sysc_flags,
+				   u32 idlemodes)
+{
+	if (!oh->class->sysc)
+		return -ENODEV;
+
+	if (sysc_fields != oh->class->sysc->sysc_fields)
+		dev_warn(dev, "sysc_fields %p != %p\n", sysc_fields,
+			 oh->class->sysc->sysc_fields);
+
+	if (rev_offs != oh->class->sysc->rev_offs)
+		dev_warn(dev, "rev_offs %08x != %08x\n", rev_offs,
+			 oh->class->sysc->rev_offs);
+	if (sysc_offs != oh->class->sysc->sysc_offs)
+		dev_warn(dev, "sysc_offs %08x != %08x\n", sysc_offs,
+			 oh->class->sysc->sysc_offs);
+	if (syss_offs != oh->class->sysc->syss_offs)
+		dev_warn(dev, "syss_offs %08x != %08x\n", syss_offs,
+			 oh->class->sysc->syss_offs);
+
+	if (sysc_flags != oh->class->sysc->sysc_flags)
+		dev_warn(dev, "sysc_flags %08x != %08x\n", sysc_flags,
+			 oh->class->sysc->sysc_flags);
+
+	if (idlemodes != oh->class->sysc->idlemodes)
+		dev_warn(dev, "idlemodes %08x != %08x\n", idlemodes,
+			 oh->class->sysc->idlemodes);
+
+	if (data->cfg->srst_udelay != oh->class->sysc->srst_udelay)
+		dev_warn(dev, "srst_udelay %i != %i\n",
+			 data->cfg->srst_udelay,
+			 oh->class->sysc->srst_udelay);
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_allocate_module - allocate new module
+ * @dev: struct device
+ * @oh: module
+ * @sysc_fields: sysc register bits
+ * @rev_offs: revision register offset
+ * @sysc_offs: sysconfig register offset
+ * @syss_offs: sysstatus register offset
+ * @sysc_flags: sysc specific flags
+ * @idlemodes: sysc supported idlemodes
+ *
+ * Note that the allocations here cannot use devm as ti-sysc can rebind.
+ */
+int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh,
+			       const struct ti_sysc_module_data *data,
+			       struct sysc_regbits *sysc_fields,
+			       u32 rev_offs, u32 sysc_offs, u32 syss_offs,
+			       u32 sysc_flags, u32 idlemodes)
+{
+	struct omap_hwmod_class_sysconfig *sysc;
+	struct omap_hwmod_class *class;
+	void __iomem *regs = NULL;
+	unsigned long flags;
+
+	sysc = kzalloc(sizeof(*sysc), GFP_KERNEL);
+	if (!sysc)
+		return -ENOMEM;
+
+	sysc->sysc_fields = sysc_fields;
+	sysc->rev_offs = rev_offs;
+	sysc->sysc_offs = sysc_offs;
+	sysc->syss_offs = syss_offs;
+	sysc->sysc_flags = sysc_flags;
+	sysc->idlemodes = idlemodes;
+	sysc->srst_udelay = data->cfg->srst_udelay;
+
+	if (!oh->_mpu_rt_va) {
+		regs = ioremap(data->module_pa,
+			       data->module_size);
+		if (!regs)
+			return -ENOMEM;
+	}
+
+	/*
+	 * We need new oh->class as the other devices in the same class
+	 * may not yet have ioremapped their registers.
+	 */
+	class = kmemdup(oh->class, sizeof(*oh->class), GFP_KERNEL);
+	if (!class)
+		return -ENOMEM;
+
+	class->sysc = sysc;
+
+	spin_lock_irqsave(&oh->_lock, flags);
+	if (regs)
+		oh->_mpu_rt_va = regs;
+	oh->class = class;
+	oh->_state = _HWMOD_STATE_INITIALIZED;
+	_setup(oh, NULL);
+	spin_unlock_irqrestore(&oh->_lock, flags);
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_init_module - initialize new module
+ * @dev: struct device
+ * @data: module data
+ * @cookie: cookie for the caller to use for later calls
+ */
+int omap_hwmod_init_module(struct device *dev,
+			   const struct ti_sysc_module_data *data,
+			   struct ti_sysc_cookie *cookie)
+{
+	struct omap_hwmod *oh;
+	struct sysc_regbits *sysc_fields;
+	u32 rev_offs, sysc_offs, syss_offs, sysc_flags, idlemodes;
+	int error;
+
+	if (!dev || !data)
+		return -EINVAL;
+
+	oh = _lookup(data->name);
+	if (!oh)
+		return -ENODEV;
+
+	cookie->data = oh;
+
+	error = omap_hwmod_init_regbits(dev, data, &sysc_fields);
+	if (error)
+		return error;
+
+	error = omap_hwmod_init_reg_offs(dev, data, &rev_offs,
+					 &sysc_offs, &syss_offs);
+	if (error)
+		return error;
+
+	error = omap_hwmod_init_sysc_flags(dev, data, &sysc_flags);
+	if (error)
+		return error;
+
+	error = omap_hwmod_init_idlemodes(dev, data, &idlemodes);
+	if (error)
+		return error;
+
+	if (data->cfg->quirks & SYSC_QUIRK_NO_IDLE_ON_INIT)
+		oh->flags |= HWMOD_INIT_NO_IDLE;
+	if (data->cfg->quirks & SYSC_QUIRK_NO_RESET_ON_INIT)
+		oh->flags |= HWMOD_INIT_NO_RESET;
+
+	error = omap_hwmod_check_module(dev, oh, data, sysc_fields,
+					rev_offs, sysc_offs, syss_offs,
+					sysc_flags, idlemodes);
+	if (!error)
+		return error;
+
+	return omap_hwmod_allocate_module(dev, oh, data, sysc_fields,
+					  rev_offs, sysc_offs, syss_offs,
+					  sysc_flags, idlemodes);
+}
+
 /**
  * omap_hwmod_setup_earlycon_flags - set up flags for early console
  *
@@ -3082,6 +3492,12 @@ static void __init omap_hwmod_setup_earlycon_flags(void)
 			if (np) {
 				uart = of_get_property(np, "ti,hwmods", NULL);
 				oh = omap_hwmod_lookup(uart);
+				if (!oh) {
+					uart = of_get_property(np->parent,
+							       "ti,hwmods",
+							       NULL);
+					oh = omap_hwmod_lookup(uart);
+				}
 				if (oh)
 					oh->flags |= DEBUG_OMAPUART_FLAGS;
 			}
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index 0b8e19f40402..c7122abbf977 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -620,6 +620,13 @@ int omap_hwmod_parse_module_range(struct omap_hwmod *oh,
 				  struct device_node *np,
 				  struct resource *res);
 
+struct ti_sysc_module_data;
+struct ti_sysc_cookie;
+
+int omap_hwmod_init_module(struct device *dev,
+			   const struct ti_sysc_module_data *data,
+			   struct ti_sysc_cookie *cookie);
+
 int omap_hwmod_enable(struct omap_hwmod *oh);
 int omap_hwmod_idle(struct omap_hwmod *oh);
 int omap_hwmod_shutdown(struct omap_hwmod *oh);
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 0afb014b211f..fe66cf247874 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -14,9 +14,7 @@
  */
 
 #include <linux/i2c-omap.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/omap-dma.h>
-#include <plat/dmtimer.h>
 
 #include "omap_hwmod.h"
 #include "l3_2xxx.h"
@@ -97,13 +95,6 @@ static struct omap_hwmod_class i2c_class = {
 	.reset		= &omap_i2c_reset,
 };
 
-static struct omap_i2c_dev_attr i2c_dev_attr = {
-	.flags		= OMAP_I2C_FLAG_NO_FIFO |
-			  OMAP_I2C_FLAG_SIMPLE_CLOCK |
-			  OMAP_I2C_FLAG_16BIT_DATA_REG |
-			  OMAP_I2C_FLAG_BUS_SHIFT_2,
-};
-
 /* I2C1 */
 static struct omap_hwmod omap2420_i2c1_hwmod = {
 	.name		= "i2c1",
@@ -116,7 +107,6 @@ static struct omap_hwmod omap2420_i2c1_hwmod = {
 		},
 	},
 	.class		= &i2c_class,
-	.dev_attr	= &i2c_dev_attr,
 	/*
 	 * From mach-omap2/pm24xx.c: "Putting MPU into the WFI state
 	 * while a transfer is active seems to cause the I2C block to
@@ -137,7 +127,6 @@ static struct omap_hwmod omap2420_i2c2_hwmod = {
 		},
 	},
 	.class		= &i2c_class,
-	.dev_attr	= &i2c_dev_attr,
 	.flags		= HWMOD_16BIT_REG,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 013b26b305d2..74eefd30518c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -14,11 +14,8 @@
  */
 
 #include <linux/i2c-omap.h>
-#include <linux/platform_data/asoc-ti-mcbsp.h>
 #include <linux/platform_data/hsmmc-omap.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/omap-dma.h>
-#include <plat/dmtimer.h>
 
 #include "omap_hwmod.h"
 #include "l3_2xxx.h"
@@ -75,12 +72,6 @@ static struct omap_hwmod_class i2c_class = {
 	.reset		= &omap_i2c_reset,
 };
 
-static struct omap_i2c_dev_attr i2c_dev_attr = {
-	.fifo_depth	= 8, /* bytes */
-	.flags		= OMAP_I2C_FLAG_BUS_SHIFT_2 |
-			  OMAP_I2C_FLAG_FORCE_19200_INT_CLK,
-};
-
 /* I2C1 */
 static struct omap_hwmod omap2430_i2c1_hwmod = {
 	.name		= "i2c1",
@@ -102,7 +93,6 @@ static struct omap_hwmod omap2430_i2c1_hwmod = {
 		},
 	},
 	.class		= &i2c_class,
-	.dev_attr	= &i2c_dev_attr,
 };
 
 /* I2C2 */
@@ -118,7 +108,6 @@ static struct omap_hwmod omap2430_i2c2_hwmod = {
 		},
 	},
 	.class		= &i2c_class,
-	.dev_attr	= &i2c_dev_attr,
 };
 
 /* gpio5 */
@@ -134,7 +123,6 @@ static struct omap_hwmod omap2430_gpio5_hwmod = {
 		},
 	},
 	.class		= &omap2xxx_gpio_hwmod_class,
-	.dev_attr	= &omap2xxx_gpio_dev_attr,
 };
 
 /* dma attributes */
@@ -167,10 +155,6 @@ static struct omap_hwmod omap2430_mailbox_hwmod = {
 };
 
 /* mcspi3 */
-static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = {
-	.num_chipselect = 2,
-};
-
 static struct omap_hwmod omap2430_mcspi3_hwmod = {
 	.name		= "mcspi3",
 	.main_clk	= "mcspi3_fck",
@@ -182,7 +166,6 @@ static struct omap_hwmod omap2430_mcspi3_hwmod = {
 		},
 	},
 	.class		= &omap2xxx_mcspi_class,
-	.dev_attr	= &omap_mcspi3_dev_attr,
 };
 
 /* usbhsotg */
@@ -239,7 +222,6 @@ static struct omap_hwmod_class_sysconfig omap2430_mcbsp_sysc = {
 static struct omap_hwmod_class omap2430_mcbsp_hwmod_class = {
 	.name = "mcbsp",
 	.sysc = &omap2430_mcbsp_sysc,
-	.rev  = MCBSP_CONFIG_TYPE2,
 };
 
 static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index 4b094cb384cb..5345919a81f8 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -9,10 +9,8 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/platform_data/gpio-omap.h>
+#include <linux/types.h>
 #include <linux/omap-dma.h>
-#include <plat/dmtimer.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include "omap_hwmod.h"
 #include "omap_hwmod_common_data.h"
@@ -159,7 +157,6 @@ static struct omap_hwmod_class_sysconfig omap2xxx_mcspi_sysc = {
 struct omap_hwmod_class omap2xxx_mcspi_class = {
 	.name	= "mcspi",
 	.sysc	= &omap2xxx_mcspi_sysc,
-	.rev	= OMAP2_MCSPI_REV,
 };
 
 /*
@@ -220,23 +217,7 @@ struct omap_hwmod omap2xxx_iva_hwmod = {
 	.class		= &iva_hwmod_class,
 };
 
-/* always-on timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
-	.timer_capability       = OMAP_TIMER_ALWON,
-};
-
-/* pwm timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
-	.timer_capability       = OMAP_TIMER_HAS_PWM,
-};
-
-/* timers with DSP interrupt dev attribute */
-static struct omap_timer_capability_dev_attr capability_dsp_dev_attr = {
-	.timer_capability       = OMAP_TIMER_HAS_DSP_IRQ,
-};
-
 /* timer1 */
-
 struct omap_hwmod omap2xxx_timer1_hwmod = {
 	.name		= "timer1",
 	.main_clk	= "gpt1_fck",
@@ -247,13 +228,11 @@ struct omap_hwmod omap2xxx_timer1_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
 	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer2 */
-
 struct omap_hwmod omap2xxx_timer2_hwmod = {
 	.name		= "timer2",
 	.main_clk	= "gpt2_fck",
@@ -269,7 +248,6 @@ struct omap_hwmod omap2xxx_timer2_hwmod = {
 };
 
 /* timer3 */
-
 struct omap_hwmod omap2xxx_timer3_hwmod = {
 	.name		= "timer3",
 	.main_clk	= "gpt3_fck",
@@ -285,7 +263,6 @@ struct omap_hwmod omap2xxx_timer3_hwmod = {
 };
 
 /* timer4 */
-
 struct omap_hwmod omap2xxx_timer4_hwmod = {
 	.name		= "timer4",
 	.main_clk	= "gpt4_fck",
@@ -301,7 +278,6 @@ struct omap_hwmod omap2xxx_timer4_hwmod = {
 };
 
 /* timer5 */
-
 struct omap_hwmod omap2xxx_timer5_hwmod = {
 	.name		= "timer5",
 	.main_clk	= "gpt5_fck",
@@ -312,13 +288,11 @@ struct omap_hwmod omap2xxx_timer5_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_dsp_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
 	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer6 */
-
 struct omap_hwmod omap2xxx_timer6_hwmod = {
 	.name		= "timer6",
 	.main_clk	= "gpt6_fck",
@@ -329,13 +303,11 @@ struct omap_hwmod omap2xxx_timer6_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_dsp_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
 	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer7 */
-
 struct omap_hwmod omap2xxx_timer7_hwmod = {
 	.name		= "timer7",
 	.main_clk	= "gpt7_fck",
@@ -346,13 +318,11 @@ struct omap_hwmod omap2xxx_timer7_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_dsp_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
 	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer8 */
-
 struct omap_hwmod omap2xxx_timer8_hwmod = {
 	.name		= "timer8",
 	.main_clk	= "gpt8_fck",
@@ -363,13 +333,11 @@ struct omap_hwmod omap2xxx_timer8_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_dsp_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
 	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer9 */
-
 struct omap_hwmod omap2xxx_timer9_hwmod = {
 	.name		= "timer9",
 	.main_clk	= "gpt9_fck",
@@ -380,13 +348,11 @@ struct omap_hwmod omap2xxx_timer9_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_pwm_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
 	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer10 */
-
 struct omap_hwmod omap2xxx_timer10_hwmod = {
 	.name		= "timer10",
 	.main_clk	= "gpt10_fck",
@@ -397,13 +363,11 @@ struct omap_hwmod omap2xxx_timer10_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_pwm_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
 	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer11 */
-
 struct omap_hwmod omap2xxx_timer11_hwmod = {
 	.name		= "timer11",
 	.main_clk	= "gpt11_fck",
@@ -414,13 +378,11 @@ struct omap_hwmod omap2xxx_timer11_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_pwm_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
 	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer12 */
-
 struct omap_hwmod omap2xxx_timer12_hwmod = {
 	.name		= "timer12",
 	.main_clk	= "gpt12_fck",
@@ -431,7 +393,6 @@ struct omap_hwmod omap2xxx_timer12_hwmod = {
 			.idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_pwm_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
 	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
 };
@@ -568,12 +529,6 @@ struct omap_hwmod omap2xxx_dss_venc_hwmod = {
 	.flags		= HWMOD_NO_IDLEST,
 };
 
-/* gpio dev_attr */
-struct omap_gpio_dev_attr omap2xxx_gpio_dev_attr = {
-	.bank_width = 32,
-	.dbck_flag = false,
-};
-
 /* gpio1 */
 struct omap_hwmod omap2xxx_gpio1_hwmod = {
 	.name		= "gpio1",
@@ -587,7 +542,6 @@ struct omap_hwmod omap2xxx_gpio1_hwmod = {
 		},
 	},
 	.class		= &omap2xxx_gpio_hwmod_class,
-	.dev_attr	= &omap2xxx_gpio_dev_attr,
 };
 
 /* gpio2 */
@@ -603,7 +557,6 @@ struct omap_hwmod omap2xxx_gpio2_hwmod = {
 		},
 	},
 	.class		= &omap2xxx_gpio_hwmod_class,
-	.dev_attr	= &omap2xxx_gpio_dev_attr,
 };
 
 /* gpio3 */
@@ -619,7 +572,6 @@ struct omap_hwmod omap2xxx_gpio3_hwmod = {
 		},
 	},
 	.class		= &omap2xxx_gpio_hwmod_class,
-	.dev_attr	= &omap2xxx_gpio_dev_attr,
 };
 
 /* gpio4 */
@@ -635,14 +587,9 @@ struct omap_hwmod omap2xxx_gpio4_hwmod = {
 		},
 	},
 	.class		= &omap2xxx_gpio_hwmod_class,
-	.dev_attr	= &omap2xxx_gpio_dev_attr,
 };
 
 /* mcspi1 */
-static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = {
-	.num_chipselect = 4,
-};
-
 struct omap_hwmod omap2xxx_mcspi1_hwmod = {
 	.name		= "mcspi1",
 	.main_clk	= "mcspi1_fck",
@@ -654,14 +601,9 @@ struct omap_hwmod omap2xxx_mcspi1_hwmod = {
 		},
 	},
 	.class		= &omap2xxx_mcspi_class,
-	.dev_attr	= &omap_mcspi1_dev_attr,
 };
 
 /* mcspi2 */
-static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = {
-	.num_chipselect = 2,
-};
-
 struct omap_hwmod omap2xxx_mcspi2_hwmod = {
 	.name		= "mcspi2",
 	.main_clk	= "mcspi2_fck",
@@ -673,7 +615,6 @@ struct omap_hwmod omap2xxx_mcspi2_hwmod = {
 		},
 	},
 	.class		= &omap2xxx_mcspi_class,
-	.dev_attr	= &omap_mcspi2_dev_attr,
 };
 
 static struct omap_hwmod_class omap2xxx_counter_hwmod_class = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
index 434bd1a77229..6f81d7a4fec1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
@@ -139,9 +139,6 @@ extern struct omap_hwmod_class am33xx_epwmss_hwmod_class;
 extern struct omap_hwmod_class am33xx_ehrpwm_hwmod_class;
 extern struct omap_hwmod_class am33xx_spi_hwmod_class;
 
-extern struct omap_gpio_dev_attr gpio_dev_attr;
-extern struct omap2_mcspi_dev_attr mcspi_attrib;
-
 void omap_hwmod_am33xx_reg(void);
 void omap_hwmod_am43xx_reg(void);
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index 4bcf9f3e1544..5efe91c6e95b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -14,9 +14,9 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/platform_data/gpio-omap.h>
+#include <linux/types.h>
+
 #include <linux/platform_data/hsmmc-omap.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
 #include "omap_hwmod.h"
 #include "i2c.h"
 #include "wd_timer.h"
@@ -537,11 +537,6 @@ struct omap_hwmod_class am33xx_gpio_hwmod_class = {
 	.rev		= 2,
 };
 
-struct omap_gpio_dev_attr gpio_dev_attr = {
-	.bank_width	= 32,
-	.dbck_flag	= true,
-};
-
 /* gpio1 */
 static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
 	{ .role = "dbclk", .clk = "gpio1_dbclk" },
@@ -560,7 +555,6 @@ struct omap_hwmod am33xx_gpio1_hwmod = {
 	},
 	.opt_clks	= gpio1_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio1_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio2 */
@@ -581,7 +575,6 @@ struct omap_hwmod am33xx_gpio2_hwmod = {
 	},
 	.opt_clks	= gpio2_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio2_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio3 */
@@ -602,7 +595,6 @@ struct omap_hwmod am33xx_gpio3_hwmod = {
 	},
 	.opt_clks	= gpio3_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio3_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpmc */
@@ -654,10 +646,6 @@ static struct omap_hwmod_class i2c_class = {
 	.reset		= &omap_i2c_reset,
 };
 
-static struct omap_i2c_dev_attr i2c_dev_attr = {
-	.flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE,
-};
-
 /* i2c1 */
 struct omap_hwmod am33xx_i2c1_hwmod = {
 	.name		= "i2c1",
@@ -670,7 +658,6 @@ struct omap_hwmod am33xx_i2c1_hwmod = {
 			.modulemode	= MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &i2c_dev_attr,
 };
 
 /* i2c1 */
@@ -685,7 +672,6 @@ struct omap_hwmod am33xx_i2c2_hwmod = {
 			.modulemode	= MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &i2c_dev_attr,
 };
 
 /* i2c3 */
@@ -700,7 +686,6 @@ struct omap_hwmod am33xx_i2c3_hwmod = {
 			.modulemode	= MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &i2c_dev_attr,
 };
 
 /*
@@ -893,13 +878,9 @@ static struct omap_hwmod_class_sysconfig am33xx_mcspi_sysc = {
 struct omap_hwmod_class am33xx_spi_hwmod_class = {
 	.name		= "mcspi",
 	.sysc		= &am33xx_mcspi_sysc,
-	.rev		= OMAP4_MCSPI_REV,
 };
 
 /* spi0 */
-struct omap2_mcspi_dev_attr mcspi_attrib = {
-	.num_chipselect	= 2,
-};
 struct omap_hwmod am33xx_spi0_hwmod = {
 	.name		= "spi0",
 	.class		= &am33xx_spi_hwmod_class,
@@ -910,7 +891,6 @@ struct omap_hwmod am33xx_spi0_hwmod = {
 			.modulemode	= MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &mcspi_attrib,
 };
 
 /* spi1 */
@@ -924,7 +904,6 @@ struct omap_hwmod am33xx_spi1_hwmod = {
 			.modulemode	= MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &mcspi_attrib,
 };
 
 /*
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 4d16b15bb0cf..53e1ac3724f2 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -17,9 +17,6 @@
 #include <linux/i2c-omap.h>
 
 #include "omap_hwmod.h"
-#include <linux/platform_data/gpio-omap.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-
 #include "omap_hwmod_common_data.h"
 
 #include "control.h"
@@ -252,7 +249,6 @@ static struct omap_hwmod am33xx_gpio0_hwmod = {
 	},
 	.opt_clks	= gpio0_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio0_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* lcdc */
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 1a2f2242e31b..23336b6c7125 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -17,15 +17,11 @@
 
 #include <linux/i2c-omap.h>
 #include <linux/power/smartreflex.h>
-#include <linux/platform_data/gpio-omap.h>
 #include <linux/platform_data/hsmmc-omap.h>
 
 #include <linux/omap-dma.h>
 #include "l3_3xxx.h"
 #include "l4_3xxx.h"
-#include <linux/platform_data/asoc-ti-mcbsp.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <plat/dmtimer.h>
 
 #include "soc.h"
 #include "omap_hwmod.h"
@@ -155,31 +151,6 @@ static struct omap_hwmod_class omap3xxx_timer_hwmod_class = {
 	.sysc = &omap3xxx_timer_sysc,
 };
 
-/* secure timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_secure_dev_attr = {
-	.timer_capability	= OMAP_TIMER_ALWON | OMAP_TIMER_SECURE,
-};
-
-/* always-on timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
-	.timer_capability	= OMAP_TIMER_ALWON,
-};
-
-/* pwm timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
-	.timer_capability	= OMAP_TIMER_HAS_PWM,
-};
-
-/* timers with DSP interrupt dev attribute */
-static struct omap_timer_capability_dev_attr capability_dsp_dev_attr = {
-	.timer_capability       = OMAP_TIMER_HAS_DSP_IRQ,
-};
-
-/* pwm timers with DSP interrupt dev attribute */
-static struct omap_timer_capability_dev_attr capability_dsp_pwm_dev_attr = {
-	.timer_capability       = OMAP_TIMER_HAS_DSP_IRQ | OMAP_TIMER_HAS_PWM,
-};
-
 /* timer1 */
 static struct omap_hwmod omap3xxx_timer1_hwmod = {
 	.name		= "timer1",
@@ -191,7 +162,6 @@ static struct omap_hwmod omap3xxx_timer1_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPT1_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &omap3xxx_timer_hwmod_class,
 	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
@@ -252,7 +222,6 @@ static struct omap_hwmod omap3xxx_timer5_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPT5_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_dsp_dev_attr,
 	.class		= &omap3xxx_timer_hwmod_class,
 	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
@@ -268,7 +237,6 @@ static struct omap_hwmod omap3xxx_timer6_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPT6_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_dsp_dev_attr,
 	.class		= &omap3xxx_timer_hwmod_class,
 	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
@@ -284,7 +252,6 @@ static struct omap_hwmod omap3xxx_timer7_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPT7_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_dsp_dev_attr,
 	.class		= &omap3xxx_timer_hwmod_class,
 	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
@@ -300,7 +267,6 @@ static struct omap_hwmod omap3xxx_timer8_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPT8_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_dsp_pwm_dev_attr,
 	.class		= &omap3xxx_timer_hwmod_class,
 	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
@@ -316,7 +282,6 @@ static struct omap_hwmod omap3xxx_timer9_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPT9_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_pwm_dev_attr,
 	.class		= &omap3xxx_timer_hwmod_class,
 	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
@@ -332,7 +297,6 @@ static struct omap_hwmod omap3xxx_timer10_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPT10_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_pwm_dev_attr,
 	.class		= &omap3xxx_timer_hwmod_class,
 	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
@@ -348,13 +312,11 @@ static struct omap_hwmod omap3xxx_timer11_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPT11_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_pwm_dev_attr,
 	.class		= &omap3xxx_timer_hwmod_class,
 	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer12 */
-
 static struct omap_hwmod omap3xxx_timer12_hwmod = {
 	.name		= "timer12",
 	.main_clk	= "gpt12_fck",
@@ -365,7 +327,6 @@ static struct omap_hwmod omap3xxx_timer12_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPT12_SHIFT,
 		},
 	},
-	.dev_attr	= &capability_secure_dev_attr,
 	.class		= &omap3xxx_timer_hwmod_class,
 	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
@@ -683,11 +644,6 @@ static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
 };
 
 /* I2C1 */
-static struct omap_i2c_dev_attr i2c1_dev_attr = {
-	.fifo_depth	= 8, /* bytes */
-	.flags		= OMAP_I2C_FLAG_BUS_SHIFT_2,
-};
-
 static struct omap_hwmod omap3xxx_i2c1_hwmod = {
 	.name		= "i2c1",
 	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
@@ -700,15 +656,9 @@ static struct omap_hwmod omap3xxx_i2c1_hwmod = {
 		},
 	},
 	.class		= &i2c_class,
-	.dev_attr	= &i2c1_dev_attr,
 };
 
 /* I2C2 */
-static struct omap_i2c_dev_attr i2c2_dev_attr = {
-	.fifo_depth	= 8, /* bytes */
-	.flags = OMAP_I2C_FLAG_BUS_SHIFT_2,
-};
-
 static struct omap_hwmod omap3xxx_i2c2_hwmod = {
 	.name		= "i2c2",
 	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
@@ -721,17 +671,9 @@ static struct omap_hwmod omap3xxx_i2c2_hwmod = {
 		},
 	},
 	.class		= &i2c_class,
-	.dev_attr	= &i2c2_dev_attr,
 };
 
 /* I2C3 */
-static struct omap_i2c_dev_attr i2c3_dev_attr = {
-	.fifo_depth	= 64, /* bytes */
-	.flags = OMAP_I2C_FLAG_BUS_SHIFT_2,
-};
-
-
-
 static struct omap_hwmod omap3xxx_i2c3_hwmod = {
 	.name		= "i2c3",
 	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
@@ -744,7 +686,6 @@ static struct omap_hwmod omap3xxx_i2c3_hwmod = {
 		},
 	},
 	.class		= &i2c_class,
-	.dev_attr	= &i2c3_dev_attr,
 };
 
 /*
@@ -769,12 +710,6 @@ static struct omap_hwmod_class omap3xxx_gpio_hwmod_class = {
 	.rev = 1,
 };
 
-/* gpio_dev_attr */
-static struct omap_gpio_dev_attr gpio_dev_attr = {
-	.bank_width = 32,
-	.dbck_flag = true,
-};
-
 /* gpio1 */
 static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
 	{ .role = "dbclk", .clk = "gpio1_dbck", },
@@ -794,7 +729,6 @@ static struct omap_hwmod omap3xxx_gpio1_hwmod = {
 		},
 	},
 	.class		= &omap3xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio2 */
@@ -816,7 +750,6 @@ static struct omap_hwmod omap3xxx_gpio2_hwmod = {
 		},
 	},
 	.class		= &omap3xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio3 */
@@ -838,7 +771,6 @@ static struct omap_hwmod omap3xxx_gpio3_hwmod = {
 		},
 	},
 	.class		= &omap3xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio4 */
@@ -860,7 +792,6 @@ static struct omap_hwmod omap3xxx_gpio4_hwmod = {
 		},
 	},
 	.class		= &omap3xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio5 */
@@ -883,7 +814,6 @@ static struct omap_hwmod omap3xxx_gpio5_hwmod = {
 		},
 	},
 	.class		= &omap3xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio6 */
@@ -906,7 +836,6 @@ static struct omap_hwmod omap3xxx_gpio6_hwmod = {
 		},
 	},
 	.class		= &omap3xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* dma attributes */
@@ -966,7 +895,6 @@ static struct omap_hwmod_class_sysconfig omap3xxx_mcbsp_sysc = {
 static struct omap_hwmod_class omap3xxx_mcbsp_hwmod_class = {
 	.name = "mcbsp",
 	.sysc = &omap3xxx_mcbsp_sysc,
-	.rev  = MCBSP_CONFIG_TYPE3,
 };
 
 /* McBSP functional clock mapping */
@@ -981,7 +909,6 @@ static struct omap_hwmod_opt_clk mcbsp234_opt_clks[] = {
 };
 
 /* mcbsp1 */
-
 static struct omap_hwmod omap3xxx_mcbsp1_hwmod = {
 	.name		= "mcbsp1",
 	.class		= &omap3xxx_mcbsp_hwmod_class,
@@ -998,11 +925,6 @@ static struct omap_hwmod omap3xxx_mcbsp1_hwmod = {
 };
 
 /* mcbsp2 */
-
-static struct omap_mcbsp_dev_attr omap34xx_mcbsp2_dev_attr = {
-	.sidetone	= "mcbsp2_sidetone",
-};
-
 static struct omap_hwmod omap3xxx_mcbsp2_hwmod = {
 	.name		= "mcbsp2",
 	.class		= &omap3xxx_mcbsp_hwmod_class,
@@ -1016,15 +938,9 @@ static struct omap_hwmod omap3xxx_mcbsp2_hwmod = {
 	},
 	.opt_clks	= mcbsp234_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(mcbsp234_opt_clks),
-	.dev_attr	= &omap34xx_mcbsp2_dev_attr,
 };
 
 /* mcbsp3 */
-
-static struct omap_mcbsp_dev_attr omap34xx_mcbsp3_dev_attr = {
-	.sidetone	= "mcbsp3_sidetone",
-};
-
 static struct omap_hwmod omap3xxx_mcbsp3_hwmod = {
 	.name		= "mcbsp3",
 	.class		= &omap3xxx_mcbsp_hwmod_class,
@@ -1038,12 +954,9 @@ static struct omap_hwmod omap3xxx_mcbsp3_hwmod = {
 	},
 	.opt_clks	= mcbsp234_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(mcbsp234_opt_clks),
-	.dev_attr	= &omap34xx_mcbsp3_dev_attr,
 };
 
 /* mcbsp4 */
-
-
 static struct omap_hwmod omap3xxx_mcbsp4_hwmod = {
 	.name		= "mcbsp4",
 	.class		= &omap3xxx_mcbsp_hwmod_class,
@@ -1060,8 +973,6 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod = {
 };
 
 /* mcbsp5 */
-
-
 static struct omap_hwmod omap3xxx_mcbsp5_hwmod = {
 	.name		= "mcbsp5",
 	.class		= &omap3xxx_mcbsp_hwmod_class,
@@ -1090,7 +1001,6 @@ static struct omap_hwmod_class omap3xxx_mcbsp_sidetone_hwmod_class = {
 };
 
 /* mcbsp2_sidetone */
-
 static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
 	.name		= "mcbsp2_sidetone",
 	.class		= &omap3xxx_mcbsp_sidetone_hwmod_class,
@@ -1099,7 +1009,6 @@ static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
 };
 
 /* mcbsp3_sidetone */
-
 static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = {
 	.name		= "mcbsp3_sidetone",
 	.class		= &omap3xxx_mcbsp_sidetone_hwmod_class,
@@ -1258,14 +1167,9 @@ static struct omap_hwmod_class_sysconfig omap34xx_mcspi_sysc = {
 static struct omap_hwmod_class omap34xx_mcspi_class = {
 	.name = "mcspi",
 	.sysc = &omap34xx_mcspi_sysc,
-	.rev = OMAP3_MCSPI_REV,
 };
 
 /* mcspi1 */
-static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = {
-	.num_chipselect = 4,
-};
-
 static struct omap_hwmod omap34xx_mcspi1 = {
 	.name		= "mcspi1",
 	.main_clk	= "mcspi1_fck",
@@ -1277,14 +1181,9 @@ static struct omap_hwmod omap34xx_mcspi1 = {
 		},
 	},
 	.class		= &omap34xx_mcspi_class,
-	.dev_attr       = &omap_mcspi1_dev_attr,
 };
 
 /* mcspi2 */
-static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = {
-	.num_chipselect = 2,
-};
-
 static struct omap_hwmod omap34xx_mcspi2 = {
 	.name		= "mcspi2",
 	.main_clk	= "mcspi2_fck",
@@ -1296,16 +1195,9 @@ static struct omap_hwmod omap34xx_mcspi2 = {
 		},
 	},
 	.class		= &omap34xx_mcspi_class,
-	.dev_attr       = &omap_mcspi2_dev_attr,
 };
 
 /* mcspi3 */
-
-
-static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = {
-	.num_chipselect = 2,
-};
-
 static struct omap_hwmod omap34xx_mcspi3 = {
 	.name		= "mcspi3",
 	.main_clk	= "mcspi3_fck",
@@ -1317,16 +1209,9 @@ static struct omap_hwmod omap34xx_mcspi3 = {
 		},
 	},
 	.class		= &omap34xx_mcspi_class,
-	.dev_attr       = &omap_mcspi3_dev_attr,
 };
 
 /* mcspi4 */
-
-
-static struct omap2_mcspi_dev_attr omap_mcspi4_dev_attr = {
-	.num_chipselect = 1,
-};
-
 static struct omap_hwmod omap34xx_mcspi4 = {
 	.name		= "mcspi4",
 	.main_clk	= "mcspi4_fck",
@@ -1338,7 +1223,6 @@ static struct omap_hwmod omap34xx_mcspi4 = {
 		},
 	},
 	.class		= &omap34xx_mcspi_class,
-	.dev_attr       = &omap_mcspi4_dev_attr,
 };
 
 /* usbhsotg */
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index afbce1f6f641..5f73b730d4fc 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -14,8 +14,6 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/platform_data/gpio-omap.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
 #include "omap_hwmod.h"
 #include "omap_hwmod_33xx_43xx_common_data.h"
 #include "prcm43xx.h"
@@ -107,7 +105,6 @@ static struct omap_hwmod am43xx_gpio0_hwmod = {
 	},
 	.opt_clks	= gpio0_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio0_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 static struct omap_hwmod_class_sysconfig am43xx_synctimer_sysc = {
@@ -239,7 +236,6 @@ static struct omap_hwmod am43xx_spi2_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &mcspi_attrib,
 };
 
 static struct omap_hwmod am43xx_spi3_hwmod = {
@@ -253,7 +249,6 @@ static struct omap_hwmod am43xx_spi3_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &mcspi_attrib,
 };
 
 static struct omap_hwmod am43xx_spi4_hwmod = {
@@ -267,7 +262,6 @@ static struct omap_hwmod am43xx_spi4_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &mcspi_attrib,
 };
 
 static struct omap_hwmod_opt_clk gpio4_opt_clks[] = {
@@ -288,7 +282,6 @@ static struct omap_hwmod am43xx_gpio4_hwmod = {
 	},
 	.opt_clks	= gpio4_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio4_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
@@ -309,7 +302,6 @@ static struct omap_hwmod am43xx_gpio5_hwmod = {
 	},
 	.opt_clks	= gpio5_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio5_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 static struct omap_hwmod_class am43xx_ocp2scp_hwmod_class = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index a1901c22a0f0..e4f8ae9cd637 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -21,17 +21,12 @@
  */
 
 #include <linux/io.h>
-#include <linux/platform_data/gpio-omap.h>
 #include <linux/platform_data/hsmmc-omap.h>
 #include <linux/power/smartreflex.h>
 #include <linux/i2c-omap.h>
 
 #include <linux/omap-dma.h>
 
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/asoc-ti-mcbsp.h>
-#include <plat/dmtimer.h>
-
 #include "omap_hwmod.h"
 #include "omap_hwmod_common_data.h"
 #include "cm1_44xx.h"
@@ -1083,12 +1078,6 @@ static struct omap_hwmod_class omap44xx_gpio_hwmod_class = {
 	.rev	= 2,
 };
 
-/* gpio dev_attr */
-static struct omap_gpio_dev_attr gpio_dev_attr = {
-	.bank_width	= 32,
-	.dbck_flag	= true,
-};
-
 /* gpio1 */
 static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
 	{ .role = "dbclk", .clk = "gpio1_dbclk" },
@@ -1108,7 +1097,6 @@ static struct omap_hwmod omap44xx_gpio1_hwmod = {
 	},
 	.opt_clks	= gpio1_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio1_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio2 */
@@ -1131,7 +1119,6 @@ static struct omap_hwmod omap44xx_gpio2_hwmod = {
 	},
 	.opt_clks	= gpio2_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio2_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio3 */
@@ -1154,7 +1141,6 @@ static struct omap_hwmod omap44xx_gpio3_hwmod = {
 	},
 	.opt_clks	= gpio3_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio3_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio4 */
@@ -1177,7 +1163,6 @@ static struct omap_hwmod omap44xx_gpio4_hwmod = {
 	},
 	.opt_clks	= gpio4_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio4_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio5 */
@@ -1200,7 +1185,6 @@ static struct omap_hwmod omap44xx_gpio5_hwmod = {
 	},
 	.opt_clks	= gpio5_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio5_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio6 */
@@ -1223,7 +1207,6 @@ static struct omap_hwmod omap44xx_gpio6_hwmod = {
 	},
 	.opt_clks	= gpio6_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio6_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /*
@@ -1394,10 +1377,6 @@ static struct omap_hwmod_class omap44xx_i2c_hwmod_class = {
 	.reset	= &omap_i2c_reset,
 };
 
-static struct omap_i2c_dev_attr i2c_dev_attr = {
-	.flags	= OMAP_I2C_FLAG_BUS_SHIFT_NONE,
-};
-
 /* i2c1 */
 static struct omap_hwmod omap44xx_i2c1_hwmod = {
 	.name		= "i2c1",
@@ -1412,7 +1391,6 @@ static struct omap_hwmod omap44xx_i2c1_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &i2c_dev_attr,
 };
 
 /* i2c2 */
@@ -1429,7 +1407,6 @@ static struct omap_hwmod omap44xx_i2c2_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &i2c_dev_attr,
 };
 
 /* i2c3 */
@@ -1446,7 +1423,6 @@ static struct omap_hwmod omap44xx_i2c3_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &i2c_dev_attr,
 };
 
 /* i2c4 */
@@ -1463,7 +1439,6 @@ static struct omap_hwmod omap44xx_i2c4_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &i2c_dev_attr,
 };
 
 /*
@@ -1702,7 +1677,6 @@ static struct omap_hwmod_class_sysconfig omap44xx_mcbsp_sysc = {
 static struct omap_hwmod_class omap44xx_mcbsp_hwmod_class = {
 	.name	= "mcbsp",
 	.sysc	= &omap44xx_mcbsp_sysc,
-	.rev	= MCBSP_CONFIG_TYPE4,
 };
 
 /* mcbsp1 */
@@ -1860,14 +1834,9 @@ static struct omap_hwmod_class_sysconfig omap44xx_mcspi_sysc = {
 static struct omap_hwmod_class omap44xx_mcspi_hwmod_class = {
 	.name	= "mcspi",
 	.sysc	= &omap44xx_mcspi_sysc,
-	.rev	= OMAP4_MCSPI_REV,
 };
 
 /* mcspi1 */
-static struct omap2_mcspi_dev_attr mcspi1_dev_attr = {
-	.num_chipselect	= 4,
-};
-
 static struct omap_hwmod omap44xx_mcspi1_hwmod = {
 	.name		= "mcspi1",
 	.class		= &omap44xx_mcspi_hwmod_class,
@@ -1880,14 +1849,9 @@ static struct omap_hwmod omap44xx_mcspi1_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &mcspi1_dev_attr,
 };
 
 /* mcspi2 */
-static struct omap2_mcspi_dev_attr mcspi2_dev_attr = {
-	.num_chipselect	= 2,
-};
-
 static struct omap_hwmod omap44xx_mcspi2_hwmod = {
 	.name		= "mcspi2",
 	.class		= &omap44xx_mcspi_hwmod_class,
@@ -1900,14 +1864,9 @@ static struct omap_hwmod omap44xx_mcspi2_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &mcspi2_dev_attr,
 };
 
 /* mcspi3 */
-static struct omap2_mcspi_dev_attr mcspi3_dev_attr = {
-	.num_chipselect	= 2,
-};
-
 static struct omap_hwmod omap44xx_mcspi3_hwmod = {
 	.name		= "mcspi3",
 	.class		= &omap44xx_mcspi_hwmod_class,
@@ -1920,14 +1879,9 @@ static struct omap_hwmod omap44xx_mcspi3_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &mcspi3_dev_attr,
 };
 
 /* mcspi4 */
-static struct omap2_mcspi_dev_attr mcspi4_dev_attr = {
-	.num_chipselect	= 1,
-};
-
 static struct omap_hwmod omap44xx_mcspi4_hwmod = {
 	.name		= "mcspi4",
 	.class		= &omap44xx_mcspi_hwmod_class,
@@ -1940,7 +1894,6 @@ static struct omap_hwmod omap44xx_mcspi4_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &mcspi4_dev_attr,
 };
 
 /*
@@ -2547,26 +2500,6 @@ static struct omap_hwmod_class omap44xx_timer_hwmod_class = {
 	.sysc	= &omap44xx_timer_sysc,
 };
 
-/* always-on timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
-	.timer_capability	= OMAP_TIMER_ALWON,
-};
-
-/* pwm timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
-	.timer_capability	= OMAP_TIMER_HAS_PWM,
-};
-
-/* timers with DSP interrupt dev attribute */
-static struct omap_timer_capability_dev_attr capability_dsp_dev_attr = {
-	.timer_capability       = OMAP_TIMER_HAS_DSP_IRQ,
-};
-
-/* pwm timers with DSP interrupt dev attribute */
-static struct omap_timer_capability_dev_attr capability_dsp_pwm_dev_attr = {
-	.timer_capability       = OMAP_TIMER_HAS_DSP_IRQ | OMAP_TIMER_HAS_PWM,
-};
-
 /* timer1 */
 static struct omap_hwmod omap44xx_timer1_hwmod = {
 	.name		= "timer1",
@@ -2581,7 +2514,6 @@ static struct omap_hwmod omap44xx_timer1_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 };
 
 /* timer2 */
@@ -2643,7 +2575,6 @@ static struct omap_hwmod omap44xx_timer5_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &capability_dsp_dev_attr,
 };
 
 /* timer6 */
@@ -2659,7 +2590,6 @@ static struct omap_hwmod omap44xx_timer6_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &capability_dsp_dev_attr,
 };
 
 /* timer7 */
@@ -2675,7 +2605,6 @@ static struct omap_hwmod omap44xx_timer7_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &capability_dsp_dev_attr,
 };
 
 /* timer8 */
@@ -2691,7 +2620,6 @@ static struct omap_hwmod omap44xx_timer8_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &capability_dsp_pwm_dev_attr,
 };
 
 /* timer9 */
@@ -2707,7 +2635,6 @@ static struct omap_hwmod omap44xx_timer9_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &capability_pwm_dev_attr,
 };
 
 /* timer10 */
@@ -2724,7 +2651,6 @@ static struct omap_hwmod omap44xx_timer10_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &capability_pwm_dev_attr,
 };
 
 /* timer11 */
@@ -2740,7 +2666,6 @@ static struct omap_hwmod omap44xx_timer11_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &capability_pwm_dev_attr,
 };
 
 /*
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index 988e7eaa1330..c72cd84b07ec 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -18,15 +18,11 @@
  */
 
 #include <linux/io.h>
-#include <linux/platform_data/gpio-omap.h>
 #include <linux/platform_data/hsmmc-omap.h>
 #include <linux/power/smartreflex.h>
 #include <linux/i2c-omap.h>
 
 #include <linux/omap-dma.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/asoc-ti-mcbsp.h>
-#include <plat/dmtimer.h>
 
 #include "omap_hwmod.h"
 #include "omap_hwmod_common_data.h"
@@ -627,12 +623,6 @@ static struct omap_hwmod_class omap54xx_gpio_hwmod_class = {
 	.rev	= 2,
 };
 
-/* gpio dev_attr */
-static struct omap_gpio_dev_attr gpio_dev_attr = {
-	.bank_width	= 32,
-	.dbck_flag	= true,
-};
-
 /* gpio1 */
 static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
 	{ .role = "dbclk", .clk = "gpio1_dbclk" },
@@ -652,7 +642,6 @@ static struct omap_hwmod omap54xx_gpio1_hwmod = {
 	},
 	.opt_clks	= gpio1_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio1_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio2 */
@@ -675,7 +664,6 @@ static struct omap_hwmod omap54xx_gpio2_hwmod = {
 	},
 	.opt_clks	= gpio2_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio2_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio3 */
@@ -698,7 +686,6 @@ static struct omap_hwmod omap54xx_gpio3_hwmod = {
 	},
 	.opt_clks	= gpio3_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio3_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio4 */
@@ -721,7 +708,6 @@ static struct omap_hwmod omap54xx_gpio4_hwmod = {
 	},
 	.opt_clks	= gpio4_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio4_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio5 */
@@ -744,7 +730,6 @@ static struct omap_hwmod omap54xx_gpio5_hwmod = {
 	},
 	.opt_clks	= gpio5_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio5_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio6 */
@@ -767,7 +752,6 @@ static struct omap_hwmod omap54xx_gpio6_hwmod = {
 	},
 	.opt_clks	= gpio6_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio6_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio7 */
@@ -790,7 +774,6 @@ static struct omap_hwmod omap54xx_gpio7_hwmod = {
 	},
 	.opt_clks	= gpio7_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio7_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio8 */
@@ -813,7 +796,6 @@ static struct omap_hwmod omap54xx_gpio8_hwmod = {
 	},
 	.opt_clks	= gpio8_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio8_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /*
@@ -839,11 +821,6 @@ static struct omap_hwmod_class omap54xx_i2c_hwmod_class = {
 	.rev	= OMAP_I2C_IP_VERSION_2,
 };
 
-/* i2c dev_attr */
-static struct omap_i2c_dev_attr i2c_dev_attr = {
-	.flags	= OMAP_I2C_FLAG_BUS_SHIFT_NONE,
-};
-
 /* i2c1 */
 static struct omap_hwmod omap54xx_i2c1_hwmod = {
 	.name		= "i2c1",
@@ -858,7 +835,6 @@ static struct omap_hwmod omap54xx_i2c1_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &i2c_dev_attr,
 };
 
 /* i2c2 */
@@ -875,7 +851,6 @@ static struct omap_hwmod omap54xx_i2c2_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &i2c_dev_attr,
 };
 
 /* i2c3 */
@@ -892,7 +867,6 @@ static struct omap_hwmod omap54xx_i2c3_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &i2c_dev_attr,
 };
 
 /* i2c4 */
@@ -909,7 +883,6 @@ static struct omap_hwmod omap54xx_i2c4_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &i2c_dev_attr,
 };
 
 /* i2c5 */
@@ -926,7 +899,6 @@ static struct omap_hwmod omap54xx_i2c5_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &i2c_dev_attr,
 };
 
 /*
@@ -1012,7 +984,6 @@ static struct omap_hwmod_class_sysconfig omap54xx_mcbsp_sysc = {
 static struct omap_hwmod_class omap54xx_mcbsp_hwmod_class = {
 	.name	= "mcbsp",
 	.sysc	= &omap54xx_mcbsp_sysc,
-	.rev	= MCBSP_CONFIG_TYPE4,
 };
 
 /* mcbsp1 */
@@ -1149,15 +1120,9 @@ static struct omap_hwmod_class_sysconfig omap54xx_mcspi_sysc = {
 static struct omap_hwmod_class omap54xx_mcspi_hwmod_class = {
 	.name	= "mcspi",
 	.sysc	= &omap54xx_mcspi_sysc,
-	.rev	= OMAP4_MCSPI_REV,
 };
 
 /* mcspi1 */
-/* mcspi1 dev_attr */
-static struct omap2_mcspi_dev_attr mcspi1_dev_attr = {
-	.num_chipselect	= 4,
-};
-
 static struct omap_hwmod omap54xx_mcspi1_hwmod = {
 	.name		= "mcspi1",
 	.class		= &omap54xx_mcspi_hwmod_class,
@@ -1170,15 +1135,9 @@ static struct omap_hwmod omap54xx_mcspi1_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &mcspi1_dev_attr,
 };
 
 /* mcspi2 */
-/* mcspi2 dev_attr */
-static struct omap2_mcspi_dev_attr mcspi2_dev_attr = {
-	.num_chipselect	= 2,
-};
-
 static struct omap_hwmod omap54xx_mcspi2_hwmod = {
 	.name		= "mcspi2",
 	.class		= &omap54xx_mcspi_hwmod_class,
@@ -1191,15 +1150,9 @@ static struct omap_hwmod omap54xx_mcspi2_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &mcspi2_dev_attr,
 };
 
 /* mcspi3 */
-/* mcspi3 dev_attr */
-static struct omap2_mcspi_dev_attr mcspi3_dev_attr = {
-	.num_chipselect	= 2,
-};
-
 static struct omap_hwmod omap54xx_mcspi3_hwmod = {
 	.name		= "mcspi3",
 	.class		= &omap54xx_mcspi_hwmod_class,
@@ -1212,15 +1165,9 @@ static struct omap_hwmod omap54xx_mcspi3_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &mcspi3_dev_attr,
 };
 
 /* mcspi4 */
-/* mcspi4 dev_attr */
-static struct omap2_mcspi_dev_attr mcspi4_dev_attr = {
-	.num_chipselect	= 1,
-};
-
 static struct omap_hwmod omap54xx_mcspi4_hwmod = {
 	.name		= "mcspi4",
 	.class		= &omap54xx_mcspi_hwmod_class,
@@ -1233,7 +1180,6 @@ static struct omap_hwmod omap54xx_mcspi4_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &mcspi4_dev_attr,
 };
 
 /*
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 4c2a05b1bd19..62352d1e6361 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -18,15 +18,11 @@
  */
 
 #include <linux/io.h>
-#include <linux/platform_data/gpio-omap.h>
 #include <linux/platform_data/hsmmc-omap.h>
 #include <linux/power/smartreflex.h>
 #include <linux/i2c-omap.h>
 
 #include <linux/omap-dma.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/asoc-ti-mcbsp.h>
-#include <plat/dmtimer.h>
 
 #include "omap_hwmod.h"
 #include "omap_hwmod_common_data.h"
@@ -818,12 +814,6 @@ static struct omap_hwmod_class dra7xx_gpio_hwmod_class = {
 	.rev	= 2,
 };
 
-/* gpio dev_attr */
-static struct omap_gpio_dev_attr gpio_dev_attr = {
-	.bank_width	= 32,
-	.dbck_flag	= true,
-};
-
 /* gpio1 */
 static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
 	{ .role = "dbclk", .clk = "gpio1_dbclk" },
@@ -844,7 +834,6 @@ static struct omap_hwmod dra7xx_gpio1_hwmod = {
 	},
 	.opt_clks	= gpio1_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio1_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio2 */
@@ -867,7 +856,6 @@ static struct omap_hwmod dra7xx_gpio2_hwmod = {
 	},
 	.opt_clks	= gpio2_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio2_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio3 */
@@ -890,7 +878,6 @@ static struct omap_hwmod dra7xx_gpio3_hwmod = {
 	},
 	.opt_clks	= gpio3_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio3_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio4 */
@@ -913,7 +900,6 @@ static struct omap_hwmod dra7xx_gpio4_hwmod = {
 	},
 	.opt_clks	= gpio4_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio4_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio5 */
@@ -936,7 +922,6 @@ static struct omap_hwmod dra7xx_gpio5_hwmod = {
 	},
 	.opt_clks	= gpio5_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio5_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio6 */
@@ -959,7 +944,6 @@ static struct omap_hwmod dra7xx_gpio6_hwmod = {
 	},
 	.opt_clks	= gpio6_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio6_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio7 */
@@ -982,7 +966,6 @@ static struct omap_hwmod dra7xx_gpio7_hwmod = {
 	},
 	.opt_clks	= gpio7_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio7_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /* gpio8 */
@@ -1005,7 +988,6 @@ static struct omap_hwmod dra7xx_gpio8_hwmod = {
 	},
 	.opt_clks	= gpio8_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio8_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 /*
@@ -1105,11 +1087,6 @@ static struct omap_hwmod_class dra7xx_i2c_hwmod_class = {
 	.rev	= OMAP_I2C_IP_VERSION_2,
 };
 
-/* i2c dev_attr */
-static struct omap_i2c_dev_attr i2c_dev_attr = {
-	.flags	= OMAP_I2C_FLAG_BUS_SHIFT_NONE,
-};
-
 /* i2c1 */
 static struct omap_hwmod dra7xx_i2c1_hwmod = {
 	.name		= "i2c1",
@@ -1124,7 +1101,6 @@ static struct omap_hwmod dra7xx_i2c1_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &i2c_dev_attr,
 };
 
 /* i2c2 */
@@ -1141,7 +1117,6 @@ static struct omap_hwmod dra7xx_i2c2_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &i2c_dev_attr,
 };
 
 /* i2c3 */
@@ -1158,7 +1133,6 @@ static struct omap_hwmod dra7xx_i2c3_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &i2c_dev_attr,
 };
 
 /* i2c4 */
@@ -1175,7 +1149,6 @@ static struct omap_hwmod dra7xx_i2c4_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &i2c_dev_attr,
 };
 
 /* i2c5 */
@@ -1192,7 +1165,6 @@ static struct omap_hwmod dra7xx_i2c5_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &i2c_dev_attr,
 };
 
 /*
@@ -1401,15 +1373,9 @@ static struct omap_hwmod_class_sysconfig dra7xx_mcspi_sysc = {
 static struct omap_hwmod_class dra7xx_mcspi_hwmod_class = {
 	.name	= "mcspi",
 	.sysc	= &dra7xx_mcspi_sysc,
-	.rev	= OMAP4_MCSPI_REV,
 };
 
 /* mcspi1 */
-/* mcspi1 dev_attr */
-static struct omap2_mcspi_dev_attr mcspi1_dev_attr = {
-	.num_chipselect	= 4,
-};
-
 static struct omap_hwmod dra7xx_mcspi1_hwmod = {
 	.name		= "mcspi1",
 	.class		= &dra7xx_mcspi_hwmod_class,
@@ -1422,15 +1388,9 @@ static struct omap_hwmod dra7xx_mcspi1_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &mcspi1_dev_attr,
 };
 
 /* mcspi2 */
-/* mcspi2 dev_attr */
-static struct omap2_mcspi_dev_attr mcspi2_dev_attr = {
-	.num_chipselect	= 2,
-};
-
 static struct omap_hwmod dra7xx_mcspi2_hwmod = {
 	.name		= "mcspi2",
 	.class		= &dra7xx_mcspi_hwmod_class,
@@ -1443,15 +1403,9 @@ static struct omap_hwmod dra7xx_mcspi2_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &mcspi2_dev_attr,
 };
 
 /* mcspi3 */
-/* mcspi3 dev_attr */
-static struct omap2_mcspi_dev_attr mcspi3_dev_attr = {
-	.num_chipselect	= 2,
-};
-
 static struct omap_hwmod dra7xx_mcspi3_hwmod = {
 	.name		= "mcspi3",
 	.class		= &dra7xx_mcspi_hwmod_class,
@@ -1464,15 +1418,9 @@ static struct omap_hwmod dra7xx_mcspi3_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &mcspi3_dev_attr,
 };
 
 /* mcspi4 */
-/* mcspi4 dev_attr */
-static struct omap2_mcspi_dev_attr mcspi4_dev_attr = {
-	.num_chipselect	= 1,
-};
-
 static struct omap_hwmod dra7xx_mcspi4_hwmod = {
 	.name		= "mcspi4",
 	.class		= &dra7xx_mcspi_hwmod_class,
@@ -1485,7 +1433,6 @@ static struct omap_hwmod dra7xx_mcspi4_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &mcspi4_dev_attr,
 };
 
 /*
diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
index 84f118280a0e..686655f884c1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
@@ -15,10 +15,9 @@
  *
  */
 
-#include <linux/platform_data/gpio-omap.h>
+#include <linux/types.h>
+
 #include <linux/platform_data/hsmmc-omap.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <plat/dmtimer.h>
 
 #include "omap_hwmod_common_data.h"
 #include "cm81xx.h"
@@ -488,11 +487,6 @@ static struct omap_hwmod_class dm81xx_gpio_hwmod_class = {
 	.rev	= 2,
 };
 
-static struct omap_gpio_dev_attr gpio_dev_attr = {
-	.bank_width	= 32,
-	.dbck_flag	= true,
-};
-
 static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
 	{ .role = "dbclk", .clk = "sysclk18_ck" },
 };
@@ -510,7 +504,6 @@ static struct omap_hwmod dm81xx_gpio1_hwmod = {
 	},
 	.opt_clks	= gpio1_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio1_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 static struct omap_hwmod_ocp_if dm81xx_l4_ls__gpio1 = {
@@ -537,7 +530,6 @@ static struct omap_hwmod dm81xx_gpio2_hwmod = {
 	},
 	.opt_clks	= gpio2_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(gpio2_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
 };
 
 static struct omap_hwmod_ocp_if dm81xx_l4_ls__gpio2 = {
@@ -654,15 +646,10 @@ static struct omap_hwmod_class dm816x_timer_hwmod_class = {
 	.sysc = &dm816x_timer_sysc,
 };
 
-static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
-	.timer_capability	= OMAP_TIMER_ALWON,
-};
-
 static struct omap_hwmod dm814x_timer1_hwmod = {
 	.name		= "timer1",
 	.clkdm_name	= "alwon_l3s_clkdm",
 	.main_clk	= "timer1_fck",
-	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &dm816x_timer_hwmod_class,
 	.flags		= HWMOD_NO_IDLEST,
 };
@@ -684,7 +671,6 @@ static struct omap_hwmod dm816x_timer1_hwmod = {
 			.modulemode = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &dm816x_timer_hwmod_class,
 };
 
@@ -699,7 +685,6 @@ static struct omap_hwmod dm814x_timer2_hwmod = {
 	.name		= "timer2",
 	.clkdm_name	= "alwon_l3s_clkdm",
 	.main_clk	= "timer2_fck",
-	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &dm816x_timer_hwmod_class,
 	.flags		= HWMOD_NO_IDLEST,
 };
@@ -721,7 +706,6 @@ static struct omap_hwmod dm816x_timer2_hwmod = {
 			.modulemode = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &dm816x_timer_hwmod_class,
 };
 
@@ -742,7 +726,6 @@ static struct omap_hwmod dm816x_timer3_hwmod = {
 			.modulemode = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &dm816x_timer_hwmod_class,
 };
 
@@ -763,7 +746,6 @@ static struct omap_hwmod dm816x_timer4_hwmod = {
 			.modulemode = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &dm816x_timer_hwmod_class,
 };
 
@@ -784,7 +766,6 @@ static struct omap_hwmod dm816x_timer5_hwmod = {
 			.modulemode = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &dm816x_timer_hwmod_class,
 };
 
@@ -805,7 +786,6 @@ static struct omap_hwmod dm816x_timer6_hwmod = {
 			.modulemode = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &dm816x_timer_hwmod_class,
 };
 
@@ -826,7 +806,6 @@ static struct omap_hwmod dm816x_timer7_hwmod = {
 			.modulemode = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &dm816x_timer_hwmod_class,
 };
 
@@ -1138,11 +1117,6 @@ static struct omap_hwmod_class_sysconfig dm816x_mcspi_sysc = {
 static struct omap_hwmod_class dm816x_mcspi_class = {
 	.name = "mcspi",
 	.sysc = &dm816x_mcspi_sysc,
-	.rev = OMAP3_MCSPI_REV,
-};
-
-static struct omap2_mcspi_dev_attr dm816x_mcspi1_dev_attr = {
-	.num_chipselect = 4,
 };
 
 static struct omap_hwmod dm81xx_mcspi1_hwmod = {
@@ -1156,7 +1130,6 @@ static struct omap_hwmod dm81xx_mcspi1_hwmod = {
 		},
 	},
 	.class		= &dm816x_mcspi_class,
-	.dev_attr	= &dm816x_mcspi1_dev_attr,
 };
 
 static struct omap_hwmod_ocp_if dm81xx_l4_ls__mcspi1 = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index 29a52df2de26..56dbaca9a728 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -19,7 +19,6 @@
 #include "display.h"
 
 /* Common IP block data across OMAP2xxx */
-extern struct omap_gpio_dev_attr omap2xxx_gpio_dev_attr;
 extern struct omap_hwmod omap2xxx_l3_main_hwmod;
 extern struct omap_hwmod omap2xxx_l4_core_hwmod;
 extern struct omap_hwmod omap2xxx_l4_wkup_hwmod;
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 6b433fce65a5..6459816c2879 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -17,17 +17,17 @@
 #include <linux/wl12xx.h>
 #include <linux/mmc/card.h>
 #include <linux/mmc/host.h>
+#include <linux/power/smartreflex.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
 
 #include <linux/platform_data/pinctrl-single.h>
 #include <linux/platform_data/hsmmc-omap.h>
 #include <linux/platform_data/iommu-omap.h>
+#include <linux/platform_data/ti-sysc.h>
 #include <linux/platform_data/wkup_m3.h>
-#include <linux/platform_data/pwm_omap_dmtimer.h>
 #include <linux/platform_data/media/ir-rx51.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
-#include <plat/dmtimer.h>
 
 #include "common.h"
 #include "common-board-devices.h"
@@ -454,6 +454,43 @@ static void __init dra7x_evm_mmc_quirk(void)
 }
 #endif
 
+static int ti_sysc_enable_module(struct device *dev,
+				 const struct ti_sysc_cookie *cookie)
+{
+	if (!cookie->data)
+		return -EINVAL;
+
+	return omap_hwmod_enable(cookie->data);
+}
+
+static int ti_sysc_idle_module(struct device *dev,
+			       const struct ti_sysc_cookie *cookie)
+{
+	if (!cookie->data)
+		return -EINVAL;
+
+	return omap_hwmod_idle(cookie->data);
+}
+
+static int ti_sysc_shutdown_module(struct device *dev,
+				   const struct ti_sysc_cookie *cookie)
+{
+	if (!cookie->data)
+		return -EINVAL;
+
+	return omap_hwmod_shutdown(cookie->data);
+}
+
+static struct of_dev_auxdata omap_auxdata_lookup[];
+
+static struct ti_sysc_platform_data ti_sysc_pdata = {
+	.auxdata = omap_auxdata_lookup,
+	.init_module = omap_hwmod_init_module,
+	.enable_module = ti_sysc_enable_module,
+	.idle_module = ti_sysc_idle_module,
+	.shutdown_module = ti_sysc_shutdown_module,
+};
+
 static struct pcs_pdata pcs_pdata;
 
 void omap_pcs_legacy_init(int irq, void (*rearm)(void))
@@ -477,33 +514,6 @@ void omap_auxdata_legacy_init(struct device *dev)
 	dev->platform_data = &twl_gpio_auxdata;
 }
 
-/* Dual mode timer PWM callbacks platdata */
-#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
-static struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = {
-	.request_by_node = omap_dm_timer_request_by_node,
-	.request_specific = omap_dm_timer_request_specific,
-	.request = omap_dm_timer_request,
-	.set_source = omap_dm_timer_set_source,
-	.get_irq = omap_dm_timer_get_irq,
-	.set_int_enable = omap_dm_timer_set_int_enable,
-	.set_int_disable = omap_dm_timer_set_int_disable,
-	.free = omap_dm_timer_free,
-	.enable = omap_dm_timer_enable,
-	.disable = omap_dm_timer_disable,
-	.get_fclk = omap_dm_timer_get_fclk,
-	.start = omap_dm_timer_start,
-	.stop = omap_dm_timer_stop,
-	.set_load = omap_dm_timer_set_load,
-	.set_match = omap_dm_timer_set_match,
-	.set_pwm = omap_dm_timer_set_pwm,
-	.set_prescaler = omap_dm_timer_set_prescaler,
-	.read_counter = omap_dm_timer_read_counter,
-	.write_counter = omap_dm_timer_write_counter,
-	.read_status = omap_dm_timer_read_status,
-	.write_status = omap_dm_timer_write_status,
-};
-#endif
-
 static struct ir_rx51_platform_data __maybe_unused rx51_ir_data = {
 	.set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat,
 };
@@ -542,7 +552,9 @@ static struct pdata_init auxdata_quirks[] __initdata = {
 	{ /* sentinel */ },
 };
 
-static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
+struct omap_sr_data __maybe_unused omap_sr_pdata[OMAP_SR_NR];
+
+static struct of_dev_auxdata omap_auxdata_lookup[] = {
 #ifdef CONFIG_MACH_NOKIA_N8X0
 	OF_DEV_AUXDATA("ti,omap2420-mmc", 0x4809c000, "mmci-omap.0", NULL),
 	OF_DEV_AUXDATA("menelaus", 0x72, "1-0072", &n8x0_menelaus_platform_data),
@@ -551,6 +563,10 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 #ifdef CONFIG_ARCH_OMAP3
 	OF_DEV_AUXDATA("ti,omap2-iommu", 0x5d000000, "5d000000.mmu",
 		       &omap3_iommu_pdata),
+	OF_DEV_AUXDATA("ti,omap3-smartreflex-core", 0x480cb000,
+		       "480cb000.smartreflex", &omap_sr_pdata[OMAP_SR_CORE]),
+	OF_DEV_AUXDATA("ti,omap3-smartreflex-mpu-iva", 0x480c9000,
+		       "480c9000.smartreflex", &omap_sr_pdata[OMAP_SR_MPU]),
 	OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x4809c000, "4809c000.mmc", &mmc_pdata[0]),
 	OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x480b4000, "480b4000.mmc", &mmc_pdata[1]),
 	OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_ir_data),
@@ -572,14 +588,17 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
 		       &wkup_m3_data),
 #endif
-#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
-	OF_DEV_AUXDATA("ti,omap-dmtimer-pwm", 0, NULL, &pwm_dmtimer_pdata),
-#endif
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
 	OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
 		       &omap4_iommu_pdata),
 	OF_DEV_AUXDATA("ti,omap4-iommu", 0x55082000, "55082000.mmu",
 		       &omap4_iommu_pdata),
+	OF_DEV_AUXDATA("ti,omap4-smartreflex-iva", 0x4a0db000,
+		       "4a0db000.smartreflex", &omap_sr_pdata[OMAP_SR_IVA]),
+	OF_DEV_AUXDATA("ti,omap4-smartreflex-core", 0x4a0dd000,
+		       "4a0dd000.smartreflex", &omap_sr_pdata[OMAP_SR_CORE]),
+	OF_DEV_AUXDATA("ti,omap4-smartreflex-mpu", 0x4a0d9000,
+		       "4a0d9000.smartreflex", &omap_sr_pdata[OMAP_SR_MPU]),
 #endif
 #ifdef CONFIG_SOC_DRA7XX
 	OF_DEV_AUXDATA("ti,dra7-hsmmc", 0x4809c000, "4809c000.mmc",
@@ -590,6 +609,7 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 		       &dra7_hsmmc_data_mmc3),
 #endif
 	/* Common auxdata */
+	OF_DEV_AUXDATA("ti,sysc", 0, NULL, &ti_sysc_pdata),
 	OF_DEV_AUXDATA("pinctrl-single", 0, NULL, &pcs_pdata),
 	{ /* sentinel */ },
 };
diff --git a/arch/arm/mach-omap2/pm-asm-offsets.c b/arch/arm/mach-omap2/pm-asm-offsets.c
new file mode 100644
index 000000000000..6d4392da7c11
--- /dev/null
+++ b/arch/arm/mach-omap2/pm-asm-offsets.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TI AM33XX and AM43XX PM Assembly Offsets
+ *
+ * Copyright (C) 2017-2018 Texas Instruments Inc.
+ */
+
+#include <linux/kbuild.h>
+#include <linux/platform_data/pm33xx.h>
+
+int main(void)
+{
+	DEFINE(AMX3_PM_WFI_FLAGS_OFFSET,
+	       offsetof(struct am33xx_pm_sram_data, wfi_flags));
+	DEFINE(AMX3_PM_L2_AUX_CTRL_VAL_OFFSET,
+	       offsetof(struct am33xx_pm_sram_data, l2_aux_ctrl_val));
+	DEFINE(AMX3_PM_L2_PREFETCH_CTRL_VAL_OFFSET,
+	       offsetof(struct am33xx_pm_sram_data, l2_prefetch_ctrl_val));
+	DEFINE(AMX3_PM_SRAM_DATA_SIZE, sizeof(struct am33xx_pm_sram_data));
+
+	BLANK();
+
+	DEFINE(AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET,
+	       offsetof(struct am33xx_pm_ro_sram_data, amx3_pm_sram_data_virt));
+	DEFINE(AMX3_PM_RO_SRAM_DATA_PHYS_OFFSET,
+	       offsetof(struct am33xx_pm_ro_sram_data, amx3_pm_sram_data_phys));
+	DEFINE(AMX3_PM_RO_SRAM_DATA_SIZE,
+	       sizeof(struct am33xx_pm_ro_sram_data));
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 8e30772cfe32..c73776b82348 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -81,6 +81,9 @@ extern unsigned int omap3_do_wfi_sz;
 /* ... and its pointer from SRAM after copy */
 extern void (*omap3_do_wfi_sram)(void);
 
+extern struct am33xx_pm_sram_addr am33xx_pm_sram;
+extern struct am33xx_pm_sram_addr am43xx_pm_sram;
+
 extern void omap3_save_scratchpad_contents(void);
 
 #define PM_RTA_ERRATUM_i608		(1 << 0)
diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c
new file mode 100644
index 000000000000..93c0b5ba9f09
--- /dev/null
+++ b/arch/arm/mach-omap2/pm33xx-core.c
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AM33XX Arch Power Management Routines
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ *	Dave Gerlach
+ */
+
+#include <asm/smp_scu.h>
+#include <asm/suspend.h>
+#include <linux/errno.h>
+#include <linux/platform_data/pm33xx.h>
+
+#include "cm33xx.h"
+#include "common.h"
+#include "control.h"
+#include "clockdomain.h"
+#include "iomap.h"
+#include "omap_hwmod.h"
+#include "pm.h"
+#include "powerdomain.h"
+#include "prm33xx.h"
+#include "soc.h"
+#include "sram.h"
+
+static struct powerdomain *cefuse_pwrdm, *gfx_pwrdm, *per_pwrdm, *mpu_pwrdm;
+static struct clockdomain *gfx_l4ls_clkdm;
+static void __iomem *scu_base;
+
+static int __init am43xx_map_scu(void)
+{
+	scu_base = ioremap(scu_a9_get_base(), SZ_256);
+
+	if (!scu_base)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static int amx3_common_init(void)
+{
+	gfx_pwrdm = pwrdm_lookup("gfx_pwrdm");
+	per_pwrdm = pwrdm_lookup("per_pwrdm");
+	mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
+
+	if ((!gfx_pwrdm) || (!per_pwrdm) || (!mpu_pwrdm))
+		return -ENODEV;
+
+	(void)clkdm_for_each(omap_pm_clkdms_setup, NULL);
+
+	/* CEFUSE domain can be turned off post bootup */
+	cefuse_pwrdm = pwrdm_lookup("cefuse_pwrdm");
+	if (cefuse_pwrdm)
+		omap_set_pwrdm_state(cefuse_pwrdm, PWRDM_POWER_OFF);
+	else
+		pr_err("PM: Failed to get cefuse_pwrdm\n");
+
+	return 0;
+}
+
+static int am33xx_suspend_init(void)
+{
+	int ret;
+
+	gfx_l4ls_clkdm = clkdm_lookup("gfx_l4ls_gfx_clkdm");
+
+	if (!gfx_l4ls_clkdm) {
+		pr_err("PM: Cannot lookup gfx_l4ls_clkdm clockdomains\n");
+		return -ENODEV;
+	}
+
+	ret = amx3_common_init();
+
+	return ret;
+}
+
+static int am43xx_suspend_init(void)
+{
+	int ret = 0;
+
+	ret = am43xx_map_scu();
+	if (ret) {
+		pr_err("PM: Could not ioremap SCU\n");
+		return ret;
+	}
+
+	ret = amx3_common_init();
+
+	return ret;
+}
+
+static void amx3_pre_suspend_common(void)
+{
+	omap_set_pwrdm_state(gfx_pwrdm, PWRDM_POWER_OFF);
+}
+
+static void amx3_post_suspend_common(void)
+{
+	int status;
+	/*
+	 * Because gfx_pwrdm is the only one under MPU control,
+	 * comment on transition status
+	 */
+	status = pwrdm_read_pwrst(gfx_pwrdm);
+	if (status != PWRDM_POWER_OFF)
+		pr_err("PM: GFX domain did not transition: %x\n", status);
+}
+
+static int am33xx_suspend(unsigned int state, int (*fn)(unsigned long))
+{
+	int ret = 0;
+
+	amx3_pre_suspend_common();
+	ret = cpu_suspend(0, fn);
+	amx3_post_suspend_common();
+
+	/*
+	 * BUG: GFX_L4LS clock domain needs to be woken up to
+	 * ensure thet L4LS clock domain does not get stuck in
+	 * transition. If that happens L3 module does not get
+	 * disabled, thereby leading to PER power domain
+	 * transition failing
+	 */
+
+	clkdm_wakeup(gfx_l4ls_clkdm);
+	clkdm_sleep(gfx_l4ls_clkdm);
+
+	return ret;
+}
+
+static int am43xx_suspend(unsigned int state, int (*fn)(unsigned long))
+{
+	int ret = 0;
+
+	amx3_pre_suspend_common();
+	scu_power_mode(scu_base, SCU_PM_POWEROFF);
+	ret = cpu_suspend(0, fn);
+	scu_power_mode(scu_base, SCU_PM_NORMAL);
+	amx3_post_suspend_common();
+
+	return ret;
+}
+
+static struct am33xx_pm_sram_addr *amx3_get_sram_addrs(void)
+{
+	if (soc_is_am33xx())
+		return &am33xx_pm_sram;
+	else if (soc_is_am437x())
+		return &am43xx_pm_sram;
+	else
+		return NULL;
+}
+
+static struct am33xx_pm_platform_data am33xx_ops = {
+	.init = am33xx_suspend_init,
+	.soc_suspend = am33xx_suspend,
+	.get_sram_addrs = amx3_get_sram_addrs,
+};
+
+static struct am33xx_pm_platform_data am43xx_ops = {
+	.init = am43xx_suspend_init,
+	.soc_suspend = am43xx_suspend,
+	.get_sram_addrs = amx3_get_sram_addrs,
+};
+
+static struct am33xx_pm_platform_data *am33xx_pm_get_pdata(void)
+{
+	if (soc_is_am33xx())
+		return &am33xx_ops;
+	else if (soc_is_am437x())
+		return &am43xx_ops;
+	else
+		return NULL;
+}
+
+void __init amx3_common_pm_init(void)
+{
+	struct am33xx_pm_platform_data *pdata;
+	struct platform_device_info devinfo;
+
+	pdata = am33xx_pm_get_pdata();
+
+	memset(&devinfo, 0, sizeof(devinfo));
+	devinfo.name = "pm33xx";
+	devinfo.data = pdata;
+	devinfo.size_data = sizeof(*pdata);
+	devinfo.id = -1;
+	platform_device_register_full(&devinfo);
+}
diff --git a/arch/arm/mach-omap2/sleep33xx.S b/arch/arm/mach-omap2/sleep33xx.S
new file mode 100644
index 000000000000..218d79930b04
--- /dev/null
+++ b/arch/arm/mach-omap2/sleep33xx.S
@@ -0,0 +1,214 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Low level suspend code for AM33XX SoCs
+ *
+ * Copyright (C) 2012-2018 Texas Instruments Incorporated - http://www.ti.com/
+ *	Dave Gerlach, Vaibhav Bedia
+ */
+
+#include <generated/ti-emif-asm-offsets.h>
+#include <generated/ti-pm-asm-offsets.h>
+#include <linux/linkage.h>
+#include <linux/ti-emif-sram.h>
+#include <asm/assembler.h>
+#include <asm/memory.h>
+
+#include "iomap.h"
+#include "cm33xx.h"
+
+#define AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED			0x00030000
+#define AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE			0x0003
+#define AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE			0x0002
+
+	.arm
+	.align 3
+
+ENTRY(am33xx_do_wfi)
+	stmfd	sp!, {r4 - r11, lr}	@ save registers on stack
+
+	/*
+	 * Flush all data from the L1 and L2 data cache before disabling
+	 * SCTLR.C bit.
+	 */
+	ldr	r1, kernel_flush
+	blx	r1
+
+	/*
+	 * Clear the SCTLR.C bit to prevent further data cache
+	 * allocation. Clearing SCTLR.C would make all the data accesses
+	 * strongly ordered and would not hit the cache.
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	bic	r0, r0, #(1 << 2)	@ Disable the C bit
+	mcr	p15, 0, r0, c1, c0, 0
+	isb
+
+	/*
+	 * Invalidate L1 and L2 data cache.
+	 */
+	ldr	r1, kernel_flush
+	blx	r1
+
+	adr	r9, am33xx_emif_sram_table
+
+	ldr	r3, [r9, #EMIF_PM_ENTER_SR_OFFSET]
+	blx	r3
+
+	ldr	r3, [r9, #EMIF_PM_SAVE_CONTEXT_OFFSET]
+	blx	r3
+
+	/* Disable EMIF */
+	ldr     r1, virt_emif_clkctrl
+	ldr     r2, [r1]
+	bic     r2, r2, #AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE
+	str     r2, [r1]
+
+	ldr	r1, virt_emif_clkctrl
+wait_emif_disable:
+	ldr	r2, [r1]
+	mov	r3, #AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED
+	cmp	r2, r3
+	bne	wait_emif_disable
+
+	/*
+	 * For the MPU WFI to be registered as an interrupt
+	 * to WKUP_M3, MPU_CLKCTRL.MODULEMODE needs to be set
+	 * to DISABLED
+	 */
+	ldr	r1, virt_mpu_clkctrl
+	ldr	r2, [r1]
+	bic	r2, r2, #AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE
+	str	r2, [r1]
+
+	/*
+	 * Execute an ISB instruction to ensure that all of the
+	 * CP15 register changes have been committed.
+	 */
+	isb
+
+	/*
+	 * Execute a barrier instruction to ensure that all cache,
+	 * TLB and branch predictor maintenance operations issued
+	 * have completed.
+	 */
+	dsb
+	dmb
+
+	/*
+	 * Execute a WFI instruction and wait until the
+	 * STANDBYWFI output is asserted to indicate that the
+	 * CPU is in idle and low power state. CPU can specualatively
+	 * prefetch the instructions so add NOPs after WFI. Thirteen
+	 * NOPs as per Cortex-A8 pipeline.
+	 */
+	wfi
+
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+
+	/* We come here in case of an abort due to a late interrupt */
+
+	/* Set MPU_CLKCTRL.MODULEMODE back to ENABLE */
+	ldr	r1, virt_mpu_clkctrl
+	mov	r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
+	str	r2, [r1]
+
+	/* Re-enable EMIF */
+	ldr	r1, virt_emif_clkctrl
+	mov	r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
+	str	r2, [r1]
+wait_emif_enable:
+	ldr	r3, [r1]
+	cmp	r2, r3
+	bne	wait_emif_enable
+
+
+	ldr	r1, [r9, #EMIF_PM_ABORT_SR_OFFSET]
+	blx	r1
+
+	/*
+	 * Set SCTLR.C bit to allow data cache allocation
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	orr	r0, r0, #(1 << 2)	@ Enable the C bit
+	mcr	p15, 0, r0, c1, c0, 0
+	isb
+
+	/* Let the suspend code know about the abort */
+	mov	r0, #1
+	ldmfd	sp!, {r4 - r11, pc}	@ restore regs and return
+ENDPROC(am33xx_do_wfi)
+
+	.align
+ENTRY(am33xx_resume_offset)
+	.word . - am33xx_do_wfi
+
+ENTRY(am33xx_resume_from_deep_sleep)
+	/* Re-enable EMIF */
+	ldr	r0, phys_emif_clkctrl
+	mov	r1, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
+	str	r1, [r0]
+wait_emif_enable1:
+	ldr	r2, [r0]
+	cmp	r1, r2
+	bne	wait_emif_enable1
+
+	adr	r9, am33xx_emif_sram_table
+
+	ldr	r1, [r9, #EMIF_PM_RESTORE_CONTEXT_OFFSET]
+	blx	r1
+
+	ldr	r1, [r9, #EMIF_PM_EXIT_SR_OFFSET]
+	blx	r1
+
+resume_to_ddr:
+	/* We are back. Branch to the common CPU resume routine */
+	mov	r0, #0
+	ldr	pc, resume_addr
+ENDPROC(am33xx_resume_from_deep_sleep)
+
+/*
+ * Local variables
+ */
+	.align
+resume_addr:
+	.word	cpu_resume - PAGE_OFFSET + 0x80000000
+kernel_flush:
+	.word   v7_flush_dcache_all
+virt_mpu_clkctrl:
+	.word	AM33XX_CM_MPU_MPU_CLKCTRL
+virt_emif_clkctrl:
+	.word	AM33XX_CM_PER_EMIF_CLKCTRL
+phys_emif_clkctrl:
+	.word	(AM33XX_CM_BASE + AM33XX_CM_PER_MOD + \
+		AM33XX_CM_PER_EMIF_CLKCTRL_OFFSET)
+
+.align 3
+/* DDR related defines */
+am33xx_emif_sram_table:
+	.space EMIF_PM_FUNCTIONS_SIZE
+
+ENTRY(am33xx_pm_sram)
+	.word am33xx_do_wfi
+	.word am33xx_do_wfi_sz
+	.word am33xx_resume_offset
+	.word am33xx_emif_sram_table
+	.word am33xx_pm_ro_sram_data
+
+.align 3
+ENTRY(am33xx_pm_ro_sram_data)
+	.space AMX3_PM_RO_SRAM_DATA_SIZE
+
+ENTRY(am33xx_do_wfi_sz)
+	.word	. - am33xx_do_wfi
diff --git a/arch/arm/mach-omap2/sleep43xx.S b/arch/arm/mach-omap2/sleep43xx.S
new file mode 100644
index 000000000000..b24be624e8b9
--- /dev/null
+++ b/arch/arm/mach-omap2/sleep43xx.S
@@ -0,0 +1,391 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Low level suspend code for AM43XX SoCs
+ *
+ * Copyright (C) 2013-2018 Texas Instruments Incorporated - http://www.ti.com/
+ *	Dave Gerlach, Vaibhav Bedia
+ */
+
+#include <generated/ti-emif-asm-offsets.h>
+#include <generated/ti-pm-asm-offsets.h>
+#include <linux/linkage.h>
+#include <linux/ti-emif-sram.h>
+
+#include <asm/assembler.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/memory.h>
+
+#include "cm33xx.h"
+#include "common.h"
+#include "iomap.h"
+#include "omap-secure.h"
+#include "omap44xx.h"
+#include "prm33xx.h"
+#include "prcm43xx.h"
+
+#define AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED		0x00030000
+#define AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE		0x0003
+#define AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE		0x0002
+
+#define AM43XX_EMIF_POWEROFF_ENABLE			0x1
+#define AM43XX_EMIF_POWEROFF_DISABLE			0x0
+
+#define AM43XX_CM_CLKSTCTRL_CLKTRCTRL_SW_SLEEP		0x1
+#define AM43XX_CM_CLKSTCTRL_CLKTRCTRL_HW_AUTO		0x3
+
+#define AM43XX_CM_BASE					0x44DF0000
+
+#define AM43XX_CM_REGADDR(inst, reg)                           \
+       AM33XX_L4_WK_IO_ADDRESS(AM43XX_CM_BASE + (inst) + (reg))
+
+#define AM43XX_CM_MPU_CLKSTCTRL AM43XX_CM_REGADDR(AM43XX_CM_MPU_INST, \
+					AM43XX_CM_MPU_MPU_CDOFFS)
+#define AM43XX_CM_MPU_MPU_CLKCTRL AM43XX_CM_REGADDR(AM43XX_CM_MPU_INST, \
+					AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET)
+#define AM43XX_CM_PER_EMIF_CLKCTRL  AM43XX_CM_REGADDR(AM43XX_CM_PER_INST, \
+					AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET)
+#define AM43XX_PRM_EMIF_CTRL_OFFSET			0x0030
+
+	.arm
+	.align 3
+
+ENTRY(am43xx_do_wfi)
+	stmfd	sp!, {r4 - r11, lr}	@ save registers on stack
+
+#ifdef CONFIG_CACHE_L2X0
+	/* Retrieve l2 cache virt address BEFORE we shut off EMIF */
+	ldr	r1, get_l2cache_base
+	blx	r1
+	mov	r8, r0
+#endif
+
+	/*
+	 * Flush all data from the L1 and L2 data cache before disabling
+	 * SCTLR.C bit.
+	 */
+	ldr	r1, kernel_flush
+	blx	r1
+
+	/*
+	 * Clear the SCTLR.C bit to prevent further data cache
+	 * allocation. Clearing SCTLR.C would make all the data accesses
+	 * strongly ordered and would not hit the cache.
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	bic	r0, r0, #(1 << 2)	@ Disable the C bit
+	mcr	p15, 0, r0, c1, c0, 0
+	isb
+	dsb
+
+	/*
+	 * Invalidate L1 and L2 data cache.
+	 */
+	ldr	r1, kernel_flush
+	blx	r1
+
+#ifdef CONFIG_CACHE_L2X0
+	/*
+	 * Clean and invalidate the L2 cache.
+	 */
+#ifdef CONFIG_PL310_ERRATA_727915
+	mov	r0, #0x03
+	mov	r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
+	dsb
+	smc	#0
+	dsb
+#endif
+	mov	r0, r8
+	adr	r4, am43xx_pm_ro_sram_data
+	ldr	r3, [r4, #AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET]
+
+	mov	r2, r0
+	ldr	r0, [r2, #L2X0_AUX_CTRL]
+	str	r0, [r3, #AMX3_PM_L2_AUX_CTRL_VAL_OFFSET]
+	ldr	r0, [r2, #L310_PREFETCH_CTRL]
+	str	r0, [r3, #AMX3_PM_L2_PREFETCH_CTRL_VAL_OFFSET]
+
+	ldr	r0, l2_val
+	str	r0, [r2, #L2X0_CLEAN_INV_WAY]
+wait:
+	ldr	r0, [r2, #L2X0_CLEAN_INV_WAY]
+	ldr	r1, l2_val
+	ands	r0, r0, r1
+	bne	wait
+#ifdef CONFIG_PL310_ERRATA_727915
+	mov	r0, #0x00
+	mov	r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
+	dsb
+	smc	#0
+	dsb
+#endif
+l2x_sync:
+	mov	r0, r8
+	mov	r2, r0
+	mov	r0, #0x0
+	str	r0, [r2, #L2X0_CACHE_SYNC]
+sync:
+	ldr	r0, [r2, #L2X0_CACHE_SYNC]
+	ands	r0, r0, #0x1
+	bne	sync
+#endif
+
+	adr     r9, am43xx_emif_sram_table
+
+	ldr     r3, [r9, #EMIF_PM_ENTER_SR_OFFSET]
+	blx     r3
+
+	ldr     r3, [r9, #EMIF_PM_SAVE_CONTEXT_OFFSET]
+	blx     r3
+
+	/* Disable EMIF */
+	ldr	r1, am43xx_virt_emif_clkctrl
+	ldr	r2, [r1]
+	bic	r2, r2, #AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE
+	str	r2, [r1]
+
+wait_emif_disable:
+	ldr	r2, [r1]
+	mov	r3, #AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED
+	cmp	r2, r3
+	bne	wait_emif_disable
+
+	/*
+	 * For the MPU WFI to be registered as an interrupt
+	 * to WKUP_M3, MPU_CLKCTRL.MODULEMODE needs to be set
+	 * to DISABLED
+	 */
+	ldr	r1, am43xx_virt_mpu_clkctrl
+	ldr	r2, [r1]
+	bic	r2, r2, #AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE
+	str	r2, [r1]
+
+	/*
+	 * Put MPU CLKDM to SW_SLEEP
+	 */
+	ldr	r1, am43xx_virt_mpu_clkstctrl
+	mov	r2, #AM43XX_CM_CLKSTCTRL_CLKTRCTRL_SW_SLEEP
+	str	r2, [r1]
+
+	/*
+	 * Execute a barrier instruction to ensure that all cache,
+	 * TLB and branch predictor maintenance operations issued
+	 * have completed.
+	 */
+	dsb
+	dmb
+
+	/*
+	 * Execute a WFI instruction and wait until the
+	 * STANDBYWFI output is asserted to indicate that the
+	 * CPU is in idle and low power state. CPU can specualatively
+	 * prefetch the instructions so add NOPs after WFI. Sixteen
+	 * NOPs as per Cortex-A9 pipeline.
+	 */
+	wfi
+
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+
+	/* We come here in case of an abort due to a late interrupt */
+	ldr	r1, am43xx_virt_mpu_clkstctrl
+	mov	r2, #AM43XX_CM_CLKSTCTRL_CLKTRCTRL_HW_AUTO
+	str	r2, [r1]
+
+	/* Set MPU_CLKCTRL.MODULEMODE back to ENABLE */
+	ldr	r1, am43xx_virt_mpu_clkctrl
+	mov	r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
+	str	r2, [r1]
+
+	/* Re-enable EMIF */
+	ldr	r1, am43xx_virt_emif_clkctrl
+	mov	r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
+	str	r2, [r1]
+wait_emif_enable:
+	ldr	r3, [r1]
+	cmp	r2, r3
+	bne	wait_emif_enable
+
+	/*
+	 * Set SCTLR.C bit to allow data cache allocation
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	orr	r0, r0, #(1 << 2)	@ Enable the C bit
+	mcr	p15, 0, r0, c1, c0, 0
+	isb
+
+	ldr     r1, [r9, #EMIF_PM_ABORT_SR_OFFSET]
+	blx     r1
+
+	/* Let the suspend code know about the abort */
+	mov	r0, #1
+	ldmfd	sp!, {r4 - r11, pc}	@ restore regs and return
+ENDPROC(am43xx_do_wfi)
+
+	.align
+ENTRY(am43xx_resume_offset)
+	.word . - am43xx_do_wfi
+
+ENTRY(am43xx_resume_from_deep_sleep)
+	/* Set MPU CLKSTCTRL to HW AUTO so that CPUidle works properly */
+	ldr	r1, am43xx_virt_mpu_clkstctrl
+	mov	r2, #AM43XX_CM_CLKSTCTRL_CLKTRCTRL_HW_AUTO
+	str	r2, [r1]
+
+	/* For AM43xx, use EMIF power down until context is restored */
+	ldr	r2, am43xx_phys_emif_poweroff
+	mov	r1, #AM43XX_EMIF_POWEROFF_ENABLE
+	str	r1, [r2, #0x0]
+
+	/* Re-enable EMIF */
+	ldr	r1, am43xx_phys_emif_clkctrl
+	mov	r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
+	str	r2, [r1]
+wait_emif_enable1:
+	ldr	r3, [r1]
+	cmp	r2, r3
+	bne	wait_emif_enable1
+
+	adr     r9, am43xx_emif_sram_table
+
+	ldr     r1, [r9, #EMIF_PM_RESTORE_CONTEXT_OFFSET]
+	blx     r1
+
+	ldr     r1, [r9, #EMIF_PM_EXIT_SR_OFFSET]
+	blx     r1
+
+	ldr     r2, am43xx_phys_emif_poweroff
+	mov     r1, #AM43XX_EMIF_POWEROFF_DISABLE
+	str     r1, [r2, #0x0]
+
+#ifdef CONFIG_CACHE_L2X0
+	ldr	r2, l2_cache_base
+	ldr	r0, [r2, #L2X0_CTRL]
+	and	r0, #0x0f
+	cmp	r0, #1
+	beq	skip_l2en			@ Skip if already enabled
+
+	adr	r4, am43xx_pm_ro_sram_data
+	ldr	r3, [r4, #AMX3_PM_RO_SRAM_DATA_PHYS_OFFSET]
+	ldr     r0, [r3, #AMX3_PM_L2_PREFETCH_CTRL_VAL_OFFSET]
+
+	ldr	r12, l2_smc1
+	dsb
+	smc	#0
+	dsb
+set_aux_ctrl:
+	ldr     r0, [r3, #AMX3_PM_L2_AUX_CTRL_VAL_OFFSET]
+	ldr	r12, l2_smc2
+	dsb
+	smc	#0
+	dsb
+
+	/* L2 invalidate on resume */
+	ldr	r0, l2_val
+	ldr	r2, l2_cache_base
+	str	r0, [r2, #L2X0_INV_WAY]
+wait2:
+	ldr	r0, [r2, #L2X0_INV_WAY]
+	ldr	r1, l2_val
+	ands	r0, r0, r1
+	bne	wait2
+#ifdef CONFIG_PL310_ERRATA_727915
+	mov	r0, #0x00
+	mov	r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
+	dsb
+	smc	#0
+	dsb
+#endif
+l2x_sync2:
+	ldr	r2, l2_cache_base
+	mov	r0, #0x0
+	str	r0, [r2, #L2X0_CACHE_SYNC]
+sync2:
+	ldr	r0, [r2, #L2X0_CACHE_SYNC]
+	ands	r0, r0, #0x1
+	bne	sync2
+
+	mov	r0, #0x1
+	ldr	r12, l2_smc3
+	dsb
+	smc	#0
+	dsb
+#endif
+skip_l2en:
+	/* We are back. Branch to the common CPU resume routine */
+	mov	r0, #0
+	ldr	pc, resume_addr
+ENDPROC(am43xx_resume_from_deep_sleep)
+
+/*
+ * Local variables
+ */
+	.align
+resume_addr:
+	.word	cpu_resume - PAGE_OFFSET + 0x80000000
+kernel_flush:
+	.word   v7_flush_dcache_all
+ddr_start:
+	.word	PAGE_OFFSET
+
+am43xx_phys_emif_poweroff:
+	.word   (AM43XX_CM_BASE + AM43XX_PRM_DEVICE_INST + \
+		 AM43XX_PRM_EMIF_CTRL_OFFSET)
+am43xx_virt_mpu_clkstctrl:
+	.word	(AM43XX_CM_MPU_CLKSTCTRL)
+am43xx_virt_mpu_clkctrl:
+	.word	(AM43XX_CM_MPU_MPU_CLKCTRL)
+am43xx_virt_emif_clkctrl:
+	.word	(AM43XX_CM_PER_EMIF_CLKCTRL)
+am43xx_phys_emif_clkctrl:
+	.word	(AM43XX_CM_BASE + AM43XX_CM_PER_INST + \
+		 AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET)
+
+#ifdef CONFIG_CACHE_L2X0
+/* L2 cache related defines for AM437x */
+get_l2cache_base:
+	.word	omap4_get_l2cache_base
+l2_cache_base:
+	.word	OMAP44XX_L2CACHE_BASE
+l2_smc1:
+	.word	OMAP4_MON_L2X0_PREFETCH_INDEX
+l2_smc2:
+	.word	OMAP4_MON_L2X0_AUXCTRL_INDEX
+l2_smc3:
+	.word	OMAP4_MON_L2X0_CTRL_INDEX
+l2_val:
+	.word	0xffff
+#endif
+
+.align 3
+/* DDR related defines */
+ENTRY(am43xx_emif_sram_table)
+	.space EMIF_PM_FUNCTIONS_SIZE
+
+ENTRY(am43xx_pm_sram)
+	.word am43xx_do_wfi
+	.word am43xx_do_wfi_sz
+	.word am43xx_resume_offset
+	.word am43xx_emif_sram_table
+	.word am43xx_pm_ro_sram_data
+
+.align 3
+
+ENTRY(am43xx_pm_ro_sram_data)
+	.space AMX3_PM_RO_SRAM_DATA_SIZE
+
+ENTRY(am43xx_do_wfi_sz)
+	.word	. - am43xx_do_wfi
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index 56dfa2d5d0a8..0cae3b070208 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -90,12 +90,7 @@ skip_secure_l1_clean:
 	mcr	p15, 0, r0, c1, c0, 0
 	isb
 
-	/*
-	 * Invalidate L1 data cache. Even though only invalidate is
-	 * necessary exported flush API is used here. Doing clean
-	 * on already clean cache would be almost NOP.
-	 */
-	bl	v7_flush_dcache_all
+	bl	v7_invalidate_l1
 
 	/*
 	 * Switch the CPU from Symmetric Multiprocessing (SMP) mode
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index eef6935e0403..0854ed9ff379 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -89,18 +89,27 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 	sr_data->nvalue_count = j;
 }
 
+extern struct omap_sr_data omap_sr_pdata[];
+
 static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 {
-	struct omap_sr_data *sr_data;
-	struct platform_device *pdev;
+	struct omap_sr_data *sr_data = NULL;
 	struct omap_volt_data *volt_data;
 	struct omap_smartreflex_dev_attr *sr_dev_attr;
-	char *name = "smartreflex";
 	static int i;
 
-	sr_data = kzalloc(sizeof(*sr_data), GFP_KERNEL);
-	if (!sr_data)
-		return -ENOMEM;
+	if (!strncmp(oh->name, "smartreflex_mpu_iva", 20) ||
+	    !strncmp(oh->name, "smartreflex_mpu", 16))
+		sr_data = &omap_sr_pdata[OMAP_SR_MPU];
+	else if (!strncmp(oh->name, "smartreflex_core", 17))
+		sr_data = &omap_sr_pdata[OMAP_SR_CORE];
+	else if (!strncmp(oh->name, "smartreflex_iva", 16))
+		sr_data = &omap_sr_pdata[OMAP_SR_IVA];
+
+	if (!sr_data) {
+		pr_err("%s: Unknown instance %s\n", __func__, oh->name);
+		return -EINVAL;
+	}
 
 	sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr;
 	if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) {
@@ -145,13 +154,9 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 
 	sr_data->enable_on_init = sr_enable_on_init;
 
-	pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data));
-	if (IS_ERR(pdev))
-		pr_warn("%s: Could not build omap_device for %s: %s\n",
-			__func__, name, oh->name);
 exit:
 	i++;
-	kfree(sr_data);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index d61fbd7a2840..4fb4dc24e5e9 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -49,7 +49,7 @@
 #include "omap_hwmod.h"
 #include "omap_device.h"
 #include <plat/counter-32k.h>
-#include <plat/dmtimer.h>
+#include <clocksource/timer-ti-dm.h>
 #include "omap-pm.h"
 
 #include "soc.h"
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 69d7f48a4183..c5c0ab8ac9f9 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -404,7 +404,7 @@ static void __init cm_x300_init_ac97(void)
 static inline void cm_x300_init_ac97(void) {}
 #endif
 
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
 static struct mtd_partition cm_x300_nand_partitions[] = {
 	[0] = {
 		.name        = "OBM",
@@ -442,11 +442,9 @@ static struct mtd_partition cm_x300_nand_partitions[] = {
 };
 
 static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
-	.enable_arbiter	= 1,
 	.keep_config	= 1,
-	.num_cs		= 1,
-	.parts[0]	= cm_x300_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(cm_x300_nand_partitions),
+	.parts		= cm_x300_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(cm_x300_nand_partitions),
 };
 
 static void __init cm_x300_init_nand(void)
@@ -522,7 +520,7 @@ static int cm_x300_ulpi_phy_reset(void)
 	return 0;
 }
 
-static inline int cm_x300_u2d_init(struct device *dev)
+static int cm_x300_u2d_init(struct device *dev)
 {
 	int err = 0;
 
@@ -534,7 +532,7 @@ static inline int cm_x300_u2d_init(struct device *dev)
 			pr_err("failed to get CLK_POUT: %d\n", err);
 			return err;
 		}
-		clk_enable(pout_clk);
+		clk_prepare_enable(pout_clk);
 
 		err = cm_x300_ulpi_phy_reset();
 		if (err) {
@@ -549,7 +547,7 @@ static inline int cm_x300_u2d_init(struct device *dev)
 static void cm_x300_u2d_exit(struct device *dev)
 {
 	if (cpu_is_pxa310()) {
-		clk_disable(pout_clk);
+		clk_disable_unprepare(pout_clk);
 		clk_put(pout_clk);
 	}
 }
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index b04431bb4ba7..e31a591e949f 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -110,7 +110,7 @@ void __init colibri_pxa3xx_init_lcd(int bl_pin)
 }
 #endif
 
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
 static struct mtd_partition colibri_nand_partitions[] = {
 	{
 		.name        = "bootloader",
@@ -138,11 +138,9 @@ static struct mtd_partition colibri_nand_partitions[] = {
 };
 
 static struct pxa3xx_nand_platform_data colibri_nand_info = {
-	.enable_arbiter	= 1,
 	.keep_config	= 1,
-	.num_cs		= 1,
-	.parts[0]	= colibri_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(colibri_nand_partitions),
+	.parts		= colibri_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(colibri_nand_partitions),
 };
 
 void __init colibri_pxa3xx_init_nand(void)
diff --git a/arch/arm/mach-pxa/colibri.h b/arch/arm/mach-pxa/colibri.h
index 673a131da875..85525d49e321 100644
--- a/arch/arm/mach-pxa/colibri.h
+++ b/arch/arm/mach-pxa/colibri.h
@@ -46,7 +46,7 @@ static inline void colibri_pxa3xx_init_lcd(int bl_pin) {}
 extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data);
 #endif
 
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
 extern void colibri_pxa3xx_init_nand(void);
 #else
 static inline void colibri_pxa3xx_init_nand(void) {}
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 4105614cc38e..9e132b3e48c6 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -291,7 +291,7 @@ static void __init littleton_init_mmc(void)
 static inline void littleton_init_mmc(void) {}
 #endif
 
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
 static struct mtd_partition littleton_nand_partitions[] = {
 	[0] = {
 		.name        = "Bootloader",
@@ -329,10 +329,8 @@ static struct mtd_partition littleton_nand_partitions[] = {
 };
 
 static struct pxa3xx_nand_platform_data littleton_nand_info = {
-	.enable_arbiter	= 1,
-	.num_cs		= 1,
-	.parts[0]	= littleton_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(littleton_nand_partitions),
+	.parts		= littleton_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(littleton_nand_partitions),
 };
 
 static void __init littleton_init_nand(void)
@@ -341,7 +339,7 @@ static void __init littleton_init_nand(void)
 }
 #else
 static inline void littleton_init_nand(void) {}
-#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+#endif /* IS_ENABLED(CONFIG_MTD_NAND_MARVELL) */
 
 #if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
 static struct led_info littleton_da9034_leds[] = {
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
index f9e3d41a4609..616b22397d73 100644
--- a/arch/arm/mach-pxa/mxm8x10.c
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -359,7 +359,7 @@ void __init mxm_8x10_ac97_init(void)
 }
 
 /* NAND flash Support */
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
 #define NAND_BLOCK_SIZE SZ_128K
 #define NB(x)           (NAND_BLOCK_SIZE * (x))
 static struct mtd_partition mxm_8x10_nand_partitions[] = {
@@ -389,11 +389,9 @@ static struct mtd_partition mxm_8x10_nand_partitions[] = {
 };
 
 static struct pxa3xx_nand_platform_data mxm_8x10_nand_info = {
-	.enable_arbiter	= 1,
 	.keep_config	= 1,
-	.num_cs		= 1,
-	.parts[0]	= mxm_8x10_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(mxm_8x10_nand_partitions)
+	.parts		= mxm_8x10_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(mxm_8x10_nand_partitions)
 };
 
 static void __init mxm_8x10_nand_init(void)
@@ -402,7 +400,7 @@ static void __init mxm_8x10_nand_init(void)
 }
 #else
 static inline void mxm_8x10_nand_init(void) {}
-#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+#endif /* IS_ENABLED(CONFIG_MTD_NAND_MARVELL) */
 
 /* Ethernet support: Davicom DM9000 */
 static struct resource dm9k_resources[] = {
diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
index 60cb59a7ebd1..b3e2016f24b1 100644
--- a/arch/arm/mach-pxa/pxa3xx-ulpi.c
+++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c
@@ -256,7 +256,7 @@ int pxa3xx_u2d_start_hc(struct usb_bus *host)
 	if (!u2d)
 		return 0;
 
-	clk_enable(u2d->clk);
+	clk_prepare_enable(u2d->clk);
 
 	if (cpu_is_pxa310()) {
 		pxa310_u2d_setup_otg_hc();
@@ -276,7 +276,7 @@ void pxa3xx_u2d_stop_hc(struct usb_bus *host)
 	if (cpu_is_pxa310())
 		pxa310_stop_otg_hc();
 
-	clk_disable(u2d->clk);
+	clk_disable_unprepare(u2d->clk);
 }
 EXPORT_SYMBOL_GPL(pxa3xx_u2d_stop_hc);
 
@@ -331,7 +331,7 @@ static int pxa3xx_u2d_probe(struct platform_device *pdev)
 			goto err_free_plat;
 	}
 
-	platform_set_drvdata(pdev, &u2d);
+	platform_set_drvdata(pdev, u2d);
 
 	return 0;
 
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index e7ac7dcb95e9..034345546f84 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -346,11 +346,9 @@ static struct mtd_partition raumfeld_nand_partitions[] = {
 };
 
 static struct pxa3xx_nand_platform_data raumfeld_nand_info = {
-	.enable_arbiter	= 1,
 	.keep_config	= 1,
-	.num_cs		= 1,
-	.parts[0]	= raumfeld_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(raumfeld_nand_partitions),
+	.parts		= raumfeld_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(raumfeld_nand_partitions),
 };
 
 /**
@@ -378,9 +376,9 @@ static struct gpiod_lookup_table raumfeld_rotary_gpios_table = {
 };
 
 static const struct property_entry raumfeld_rotary_properties[] __initconst = {
-	PROPERTY_ENTRY_INTEGER("rotary-encoder,steps-per-period", u32, 24),
-	PROPERTY_ENTRY_INTEGER("linux,axis",			  u32, REL_X),
-	PROPERTY_ENTRY_INTEGER("rotary-encoder,relative_axis",	  u32, 1),
+	PROPERTY_ENTRY_U32("rotary-encoder,steps-per-period", 24),
+	PROPERTY_ENTRY_U32("linux,axis",		      REL_X),
+	PROPERTY_ENTRY_U32("rotary-encoder,relative_axis",    1),
 	{ },
 };
 
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 4268552d600d..d69de312d8d9 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -338,7 +338,7 @@ static void __init zylonite_init_keypad(void)
 static inline void zylonite_init_keypad(void) {}
 #endif
 
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
 static struct mtd_partition zylonite_nand_partitions[] = {
 	[0] = {
 		.name        = "Bootloader",
@@ -376,10 +376,8 @@ static struct mtd_partition zylonite_nand_partitions[] = {
 };
 
 static struct pxa3xx_nand_platform_data zylonite_nand_info = {
-	.enable_arbiter	= 1,
-	.num_cs		= 1,
-	.parts[0]	= zylonite_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(zylonite_nand_partitions),
+	.parts		= zylonite_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(zylonite_nand_partitions),
 };
 
 static void __init zylonite_init_nand(void)
@@ -388,7 +386,7 @@ static void __init zylonite_init_nand(void)
 }
 #else
 static inline void zylonite_init_nand(void) {}
-#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+#endif /* IS_ENABLED(CONFIG_MTD_NAND_MARVELL) */
 
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static struct pxaohci_platform_data zylonite_ohci_info = {
diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c
index ecec340ca345..51984a40b097 100644
--- a/arch/arm/mach-rockchip/platsmp.c
+++ b/arch/arm/mach-rockchip/platsmp.c
@@ -208,6 +208,7 @@ static int __init rockchip_smp_prepare_sram(struct device_node *node)
 }
 
 static const struct regmap_config rockchip_pmu_regmap_config = {
+	.name = "rockchip-pmu",
 	.reg_bits = 32,
 	.val_bits = 32,
 	.reg_stride = 4,
diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h
index a8fa4f7e1f60..43c1ac696274 100644
--- a/arch/arm/mach-shmobile/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -7,6 +7,10 @@ extern void shmobile_init_delay(void);
 extern void shmobile_boot_vector(void);
 extern unsigned long shmobile_boot_fn;
 extern unsigned long shmobile_boot_size;
+extern void shmobile_boot_vector_gen2(void);
+extern unsigned long shmobile_boot_fn_gen2;
+extern unsigned long shmobile_boot_cpu_gen2;
+extern unsigned long shmobile_boot_size_gen2;
 extern void shmobile_smp_boot(void);
 extern void shmobile_smp_sleep(void);
 extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn,
diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S
index 32e0bf6e3ccb..cef8e8c555f8 100644
--- a/arch/arm/mach-shmobile/headsmp.S
+++ b/arch/arm/mach-shmobile/headsmp.S
@@ -16,6 +16,11 @@
 #include <asm/assembler.h>
 #include <asm/memory.h>
 
+#define SCTLR_MMU	0x01
+#define BOOTROM_ADDRESS	0xE6340000
+#define RWTCSRA_ADDRESS 0xE6020004
+#define RWTCSRA_WOVF	0x10
+
 /*
  * Reset vector for secondary CPUs.
  * This will be mapped at address 0 by SBAR register.
@@ -37,6 +42,56 @@ shmobile_boot_fn:
 shmobile_boot_size:
 	.long	. - shmobile_boot_vector
 
+#ifdef CONFIG_ARCH_RCAR_GEN2
+/*
+ * Reset vector for R-Car Gen2 and RZ/G1 secondary CPUs.
+ * This will be mapped at address 0 by SBAR register.
+ */
+ENTRY(shmobile_boot_vector_gen2)
+	mrc	p15, 0, r0, c0, c0, 5		@ r0 = MPIDR
+	ldr	r1, shmobile_boot_cpu_gen2
+	cmp	r0, r1
+	bne	shmobile_smp_continue_gen2
+
+	mrc	p15, 0, r1, c1, c0, 0		@ r1 = SCTLR
+	and	r0, r1, #SCTLR_MMU
+	cmp	r0, #SCTLR_MMU
+	beq	shmobile_smp_continue_gen2
+
+	ldr	r0, rwtcsra
+	mov	r1, #0
+	ldrb	r1, [r0]
+	and	r0, r1, #RWTCSRA_WOVF
+	cmp	r0, #RWTCSRA_WOVF
+	bne	shmobile_smp_continue_gen2
+
+	ldr	r0, bootrom
+	bx	r0
+
+shmobile_smp_continue_gen2:
+	ldr     r1, shmobile_boot_fn_gen2
+	bx	r1
+
+ENDPROC(shmobile_boot_vector_gen2)
+
+	.align	4
+rwtcsra:
+	.word	RWTCSRA_ADDRESS
+bootrom:
+	.word	BOOTROM_ADDRESS
+	.globl	shmobile_boot_cpu_gen2
+shmobile_boot_cpu_gen2:
+	.word	0x00000000
+
+	.align	2
+	.globl	shmobile_boot_fn_gen2
+shmobile_boot_fn_gen2:
+	.space	4
+	.globl	shmobile_boot_size_gen2
+shmobile_boot_size_gen2:
+	.long	. - shmobile_boot_vector_gen2
+#endif /* CONFIG_ARCH_RCAR_GEN2 */
+
 /*
  * Per-CPU SMP boot function/argument selection code based on MPIDR
  */
diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
index 4422b615a6ee..ba732effc90b 100644
--- a/arch/arm/mach-shmobile/platsmp-apmu.c
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -191,6 +191,7 @@ static void __init shmobile_smp_apmu_setup_boot(void)
 {
 	/* install boot code shared by all CPUs */
 	shmobile_boot_fn = __pa_symbol(shmobile_smp_boot);
+	shmobile_boot_fn_gen2 = shmobile_boot_fn;
 }
 
 void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus,
diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c
index e5f215c8b218..5a798b406af0 100644
--- a/arch/arm/mach-shmobile/pm-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c
@@ -17,6 +17,7 @@
 #include <linux/smp.h>
 #include <linux/soc/renesas/rcar-sysc.h>
 #include <asm/io.h>
+#include <asm/cputype.h>
 #include "common.h"
 #include "rcar-gen2.h"
 
@@ -37,7 +38,6 @@
 #define CA7RESCNT_CODE	0x5a5a0000
 #define CA7RESCNT_CPUS	0xf		/* CPU0-3 */
 
-
 /* On-chip RAM */
 #define ICRAM1		0xe63c0000	/* Inter Connect RAM1 (4 KiB) */
 
@@ -119,8 +119,17 @@ map:
 	p = ioremap(res.start, resource_size(&res));
 	if (!p)
 		return;
-
-	memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+	/*
+	 * install the reset vector, use the largest version if we have enough
+	 * memory available
+	 */
+	if (resource_size(&res) >= shmobile_boot_size_gen2) {
+		shmobile_boot_cpu_gen2 = read_cpuid_mpidr();
+		memcpy_toio(p, shmobile_boot_vector_gen2,
+			    shmobile_boot_size_gen2);
+	} else {
+		memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+	}
 	iounmap(p);
 
 	/* setup reset vectors */
diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
index 44438f344dc8..93f628acfd94 100644
--- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -1,9 +1,9 @@
 /*
  * R-Car Generation 2 da9063/da9210 regulator quirk
  *
- * The r8a7790/lager and r8a7791/koelsch development boards have da9063 and
- * da9210 regulators.  Both regulators have their interrupt request lines tied
- * to the same interrupt pin (IRQ2) on the SoC.
+ * Certain Gen2 development boards have an da9063 and one or more da9210
+ * regulators. All of these regulators have their interrupt request lines
+ * tied to the same interrupt pin (IRQ2) on the SoC.
  *
  * After cold boot or da9063-induced restart, both the da9063 and da9210 seem
  * to assert their interrupt request lines.  Hence as soon as one driver
@@ -50,7 +50,7 @@ static void __iomem *irqc;
 static u8 da9063_irq_clr[] = { DA9063_REG_IRQ_MASK_A, 0xff, 0xff, 0xff, 0xff };
 static u8 da9210_irq_clr[] = { DA9210_REG_MASK_A, 0xff, 0xff };
 
-static struct i2c_msg da9xxx_msgs[2] = {
+static struct i2c_msg da9xxx_msgs[3] = {
 	{
 		.addr = 0x58,
 		.len = ARRAY_SIZE(da9063_irq_clr),
@@ -59,6 +59,10 @@ static struct i2c_msg da9xxx_msgs[2] = {
 		.addr = 0x68,
 		.len = ARRAY_SIZE(da9210_irq_clr),
 		.buf = da9210_irq_clr,
+	}, {
+		.addr = 0x70,
+		.len = ARRAY_SIZE(da9210_irq_clr),
+		.buf = da9210_irq_clr,
 	},
 };
 
@@ -85,12 +89,16 @@ static int regulator_quirk_notify(struct notifier_block *nb,
 	dev_dbg(dev, "Detected %s\n", client->name);
 
 	if ((client->addr == 0x58 && !strcmp(client->name, "da9063")) ||
-	    (client->addr == 0x68 && !strcmp(client->name, "da9210"))) {
-		int ret;
+	    (client->addr == 0x68 && !strcmp(client->name, "da9210")) ||
+	    (client->addr == 0x70 && !strcmp(client->name, "da9210"))) {
+		int ret, len;
+
+		/* There are two DA9210 on Stout, one on the other boards. */
+		len = of_machine_is_compatible("renesas,stout") ? 3 : 2;
 
 		dev_info(&client->dev, "clearing da9063/da9210 interrupts\n");
-		ret = i2c_transfer(client->adapter, da9xxx_msgs, ARRAY_SIZE(da9xxx_msgs));
-		if (ret != ARRAY_SIZE(da9xxx_msgs))
+		ret = i2c_transfer(client->adapter, da9xxx_msgs, len);
+		if (ret != len)
 			dev_err(&client->dev, "i2c error %d\n", ret);
 	}
 
@@ -118,6 +126,7 @@ static int __init rcar_gen2_regulator_quirk(void)
 
 	if (!of_machine_is_compatible("renesas,koelsch") &&
 	    !of_machine_is_compatible("renesas,lager") &&
+	    !of_machine_is_compatible("renesas,stout") &&
 	    !of_machine_is_compatible("renesas,gose"))
 		return -ENODEV;
 
diff --git a/arch/arm/mach-socfpga/pm.c b/arch/arm/mach-socfpga/pm.c
index c378ab0c2431..d4866788702c 100644
--- a/arch/arm/mach-socfpga/pm.c
+++ b/arch/arm/mach-socfpga/pm.c
@@ -116,7 +116,6 @@ static int socfpga_pm_suspend(unsigned long arg)
 static int socfpga_pm_enter(suspend_state_t state)
 {
 	switch (state) {
-	case PM_SUSPEND_STANDBY:
 	case PM_SUSPEND_MEM:
 		outer_disable();
 		cpu_suspend(0, socfpga_pm_suspend);
diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig
index 0d1889bbde58..713c068b953f 100644
--- a/arch/arm/mach-stm32/Kconfig
+++ b/arch/arm/mach-stm32/Kconfig
@@ -1,8 +1,10 @@
-config ARCH_STM32
-	bool "STMicrolectronics STM32"
-	depends on ARM_SINGLE_ARMV7M
+menuconfig ARCH_STM32
+	bool "STMicroelectronics STM32 family" if ARM_SINGLE_ARMV7M || ARCH_MULTI_V7
+	select ARMV7M_SYSTICK if ARM_SINGLE_ARMV7M
+	select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
+	select ARM_GIC if ARCH_MULTI_V7
+	select ARM_PSCI if ARCH_MULTI_V7
 	select ARCH_HAS_RESET_CONTROLLER
-	select ARMV7M_SYSTICK
 	select CLKSRC_STM32
 	select PINCTRL
 	select RESET_CONTROLLER
@@ -10,22 +12,42 @@ config ARCH_STM32
 	help
 	  Support for STMicroelectronics STM32 processors.
 
+if ARCH_STM32
+
+if ARM_SINGLE_ARMV7M
+
 config MACH_STM32F429
-	bool "STMicrolectronics STM32F429"
-	depends on ARCH_STM32
+	bool "STMicroelectronics STM32F429"
+	select ARM_AMBA
 	default y
 
 config MACH_STM32F469
-	bool "STMicrolectronics STM32F469"
-	depends on ARCH_STM32
+	bool "STMicroelectronics STM32F469"
+	select ARM_AMBA
 	default y
 
 config MACH_STM32F746
-	bool "STMicrolectronics STM32F746"
-	depends on ARCH_STM32
+	bool "STMicroelectronics STM32F746"
+	select ARM_AMBA
+	default y
+
+config MACH_STM32F769
+	bool "STMicroelectronics STM32F769"
+	select ARM_AMBA
 	default y
 
 config MACH_STM32H743
-	bool "STMicrolectronics STM32H743"
-	depends on ARCH_STM32
+	bool "STMicroelectronics STM32H743"
+	default y
+
+endif # ARMv7-M
+
+if ARCH_MULTI_V7
+
+config MACH_STM32MP157
+	bool "STMicroelectronics STM32MP157"
 	default y
+
+endif # ARMv7-A
+
+endif
diff --git a/arch/arm/mach-stm32/board-dt.c b/arch/arm/mach-stm32/board-dt.c
index e918686e4191..011d57b488c2 100644
--- a/arch/arm/mach-stm32/board-dt.c
+++ b/arch/arm/mach-stm32/board-dt.c
@@ -1,22 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) Maxime Coquelin 2015
+ * Copyright (C) STMicroelectronics 2017
  * Author:  Maxime Coquelin <mcoquelin.stm32@gmail.com>
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #include <linux/kernel.h>
-#include <asm/v7m.h>
 #include <asm/mach/arch.h>
+#ifdef CONFIG_ARM_SINGLE_ARMV7M
+#include <asm/v7m.h>
+#endif
 
 static const char *const stm32_compat[] __initconst = {
 	"st,stm32f429",
 	"st,stm32f469",
 	"st,stm32f746",
+	"st,stm32f769",
 	"st,stm32h743",
+	"st,stm32mp157",
 	NULL
 };
 
 DT_MACHINE_START(STM32DT, "STM32 (Device Tree Support)")
 	.dt_compat = stm32_compat,
+#ifdef CONFIG_ARM_SINGLE_ARMV7M
 	.restart = armv7m_restart,
+#endif
 MACHINE_END
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 58153cdf025b..ce53ceaf4cc5 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -48,4 +48,11 @@ config MACH_SUN9I
 	default ARCH_SUNXI
 	select ARM_GIC
 
+config ARCH_SUNXI_MC_SMP
+	bool
+	depends on SMP
+	default MACH_SUN9I
+	select ARM_CCI400_PORT_CTRL
+	select ARM_CPU_SUSPEND
+
 endif
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 27b168f121a1..7de9cc286d53 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -1,2 +1,5 @@
+CFLAGS_mc_smp.o	+= -march=armv7-a
+
 obj-$(CONFIG_ARCH_SUNXI) += sunxi.o
+obj-$(CONFIG_ARCH_SUNXI_MC_SMP) += mc_smp.o
 obj-$(CONFIG_SMP) += platsmp.o
diff --git a/arch/arm/mach-sunxi/mc_smp.c b/arch/arm/mach-sunxi/mc_smp.c
new file mode 100644
index 000000000000..c0246ec54a0a
--- /dev/null
+++ b/arch/arm/mach-sunxi/mc_smp.c
@@ -0,0 +1,856 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * arch/arm/mach-sunxi/mc_smp.c
+ *
+ * Based on Allwinner code, arch/arm/mach-exynos/mcpm-exynos.c, and
+ * arch/arm/mach-hisi/platmcpm.c
+ * Cluster cache enable trampoline code adapted from MCPM framework
+ */
+
+#include <linux/arm-cci.h>
+#include <linux/cpu_pm.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/irqchip/arm-gic.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/smp.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/cputype.h>
+#include <asm/idmap.h>
+#include <asm/smp_plat.h>
+#include <asm/suspend.h>
+
+#define SUNXI_CPUS_PER_CLUSTER		4
+#define SUNXI_NR_CLUSTERS		2
+
+#define POLL_USEC	100
+#define TIMEOUT_USEC	100000
+
+#define CPUCFG_CX_CTRL_REG0(c)		(0x10 * (c))
+#define CPUCFG_CX_CTRL_REG0_L1_RST_DISABLE(n)	BIT(n)
+#define CPUCFG_CX_CTRL_REG0_L1_RST_DISABLE_ALL	0xf
+#define CPUCFG_CX_CTRL_REG0_L2_RST_DISABLE_A7	BIT(4)
+#define CPUCFG_CX_CTRL_REG0_L2_RST_DISABLE_A15	BIT(0)
+#define CPUCFG_CX_CTRL_REG1(c)		(0x10 * (c) + 0x4)
+#define CPUCFG_CX_CTRL_REG1_ACINACTM	BIT(0)
+#define CPUCFG_CX_STATUS(c)		(0x30 + 0x4 * (c))
+#define CPUCFG_CX_STATUS_STANDBYWFI(n)	BIT(16 + (n))
+#define CPUCFG_CX_STATUS_STANDBYWFIL2	BIT(0)
+#define CPUCFG_CX_RST_CTRL(c)		(0x80 + 0x4 * (c))
+#define CPUCFG_CX_RST_CTRL_DBG_SOC_RST	BIT(24)
+#define CPUCFG_CX_RST_CTRL_ETM_RST(n)	BIT(20 + (n))
+#define CPUCFG_CX_RST_CTRL_ETM_RST_ALL	(0xf << 20)
+#define CPUCFG_CX_RST_CTRL_DBG_RST(n)	BIT(16 + (n))
+#define CPUCFG_CX_RST_CTRL_DBG_RST_ALL	(0xf << 16)
+#define CPUCFG_CX_RST_CTRL_H_RST	BIT(12)
+#define CPUCFG_CX_RST_CTRL_L2_RST	BIT(8)
+#define CPUCFG_CX_RST_CTRL_CX_RST(n)	BIT(4 + (n))
+#define CPUCFG_CX_RST_CTRL_CORE_RST(n)	BIT(n)
+
+#define PRCM_CPU_PO_RST_CTRL(c)		(0x4 + 0x4 * (c))
+#define PRCM_CPU_PO_RST_CTRL_CORE(n)	BIT(n)
+#define PRCM_CPU_PO_RST_CTRL_CORE_ALL	0xf
+#define PRCM_PWROFF_GATING_REG(c)	(0x100 + 0x4 * (c))
+#define PRCM_PWROFF_GATING_REG_CLUSTER	BIT(4)
+#define PRCM_PWROFF_GATING_REG_CORE(n)	BIT(n)
+#define PRCM_PWR_SWITCH_REG(c, cpu)	(0x140 + 0x10 * (c) + 0x4 * (cpu))
+#define PRCM_CPU_SOFT_ENTRY_REG		0x164
+
+#define CPU0_SUPPORT_HOTPLUG_MAGIC0	0xFA50392F
+#define CPU0_SUPPORT_HOTPLUG_MAGIC1	0x790DCA3A
+
+static void __iomem *cpucfg_base;
+static void __iomem *prcm_base;
+static void __iomem *sram_b_smp_base;
+
+static bool sunxi_core_is_cortex_a15(unsigned int core, unsigned int cluster)
+{
+	struct device_node *node;
+	int cpu = cluster * SUNXI_CPUS_PER_CLUSTER + core;
+
+	node = of_cpu_device_node_get(cpu);
+
+	/* In case of_cpu_device_node_get fails */
+	if (!node)
+		node = of_get_cpu_node(cpu, NULL);
+
+	if (!node) {
+		/*
+		 * There's no point in returning an error, since we
+		 * would be mid way in a core or cluster power sequence.
+		 */
+		pr_err("%s: Couldn't get CPU cluster %u core %u device node\n",
+		       __func__, cluster, core);
+
+		return false;
+	}
+
+	return of_device_is_compatible(node, "arm,cortex-a15");
+}
+
+static int sunxi_cpu_power_switch_set(unsigned int cpu, unsigned int cluster,
+				      bool enable)
+{
+	u32 reg;
+
+	/* control sequence from Allwinner A80 user manual v1.2 PRCM section */
+	reg = readl(prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu));
+	if (enable) {
+		if (reg == 0x00) {
+			pr_debug("power clamp for cluster %u cpu %u already open\n",
+				 cluster, cpu);
+			return 0;
+		}
+
+		writel(0xff, prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu));
+		udelay(10);
+		writel(0xfe, prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu));
+		udelay(10);
+		writel(0xf8, prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu));
+		udelay(10);
+		writel(0xf0, prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu));
+		udelay(10);
+		writel(0x00, prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu));
+		udelay(10);
+	} else {
+		writel(0xff, prcm_base + PRCM_PWR_SWITCH_REG(cluster, cpu));
+		udelay(10);
+	}
+
+	return 0;
+}
+
+static void sunxi_cpu0_hotplug_support_set(bool enable)
+{
+	if (enable) {
+		writel(CPU0_SUPPORT_HOTPLUG_MAGIC0, sram_b_smp_base);
+		writel(CPU0_SUPPORT_HOTPLUG_MAGIC1, sram_b_smp_base + 0x4);
+	} else {
+		writel(0x0, sram_b_smp_base);
+		writel(0x0, sram_b_smp_base + 0x4);
+	}
+}
+
+static int sunxi_cpu_powerup(unsigned int cpu, unsigned int cluster)
+{
+	u32 reg;
+
+	pr_debug("%s: cluster %u cpu %u\n", __func__, cluster, cpu);
+	if (cpu >= SUNXI_CPUS_PER_CLUSTER || cluster >= SUNXI_NR_CLUSTERS)
+		return -EINVAL;
+
+	/* Set hotplug support magic flags for cpu0 */
+	if (cluster == 0 && cpu == 0)
+		sunxi_cpu0_hotplug_support_set(true);
+
+	/* assert processor power-on reset */
+	reg = readl(prcm_base + PRCM_CPU_PO_RST_CTRL(cluster));
+	reg &= ~PRCM_CPU_PO_RST_CTRL_CORE(cpu);
+	writel(reg, prcm_base + PRCM_CPU_PO_RST_CTRL(cluster));
+
+	/* Cortex-A7: hold L1 reset disable signal low */
+	if (!sunxi_core_is_cortex_a15(cpu, cluster)) {
+		reg = readl(cpucfg_base + CPUCFG_CX_CTRL_REG0(cluster));
+		reg &= ~CPUCFG_CX_CTRL_REG0_L1_RST_DISABLE(cpu);
+		writel(reg, cpucfg_base + CPUCFG_CX_CTRL_REG0(cluster));
+	}
+
+	/* assert processor related resets */
+	reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+	reg &= ~CPUCFG_CX_RST_CTRL_DBG_RST(cpu);
+
+	/*
+	 * Allwinner code also asserts resets for NEON on A15. According
+	 * to ARM manuals, asserting power-on reset is sufficient.
+	 */
+	if (!sunxi_core_is_cortex_a15(cpu, cluster))
+		reg &= ~CPUCFG_CX_RST_CTRL_ETM_RST(cpu);
+
+	writel(reg, cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+
+	/* open power switch */
+	sunxi_cpu_power_switch_set(cpu, cluster, true);
+
+	/* clear processor power gate */
+	reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster));
+	reg &= ~PRCM_PWROFF_GATING_REG_CORE(cpu);
+	writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster));
+	udelay(20);
+
+	/* de-assert processor power-on reset */
+	reg = readl(prcm_base + PRCM_CPU_PO_RST_CTRL(cluster));
+	reg |= PRCM_CPU_PO_RST_CTRL_CORE(cpu);
+	writel(reg, prcm_base + PRCM_CPU_PO_RST_CTRL(cluster));
+
+	/* de-assert all processor resets */
+	reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+	reg |= CPUCFG_CX_RST_CTRL_DBG_RST(cpu);
+	reg |= CPUCFG_CX_RST_CTRL_CORE_RST(cpu);
+	if (!sunxi_core_is_cortex_a15(cpu, cluster))
+		reg |= CPUCFG_CX_RST_CTRL_ETM_RST(cpu);
+	else
+		reg |= CPUCFG_CX_RST_CTRL_CX_RST(cpu); /* NEON */
+	writel(reg, cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+
+	return 0;
+}
+
+static int sunxi_cluster_powerup(unsigned int cluster)
+{
+	u32 reg;
+
+	pr_debug("%s: cluster %u\n", __func__, cluster);
+	if (cluster >= SUNXI_NR_CLUSTERS)
+		return -EINVAL;
+
+	/* assert ACINACTM */
+	reg = readl(cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster));
+	reg |= CPUCFG_CX_CTRL_REG1_ACINACTM;
+	writel(reg, cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster));
+
+	/* assert cluster processor power-on resets */
+	reg = readl(prcm_base + PRCM_CPU_PO_RST_CTRL(cluster));
+	reg &= ~PRCM_CPU_PO_RST_CTRL_CORE_ALL;
+	writel(reg, prcm_base + PRCM_CPU_PO_RST_CTRL(cluster));
+
+	/* assert cluster resets */
+	reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+	reg &= ~CPUCFG_CX_RST_CTRL_DBG_SOC_RST;
+	reg &= ~CPUCFG_CX_RST_CTRL_DBG_RST_ALL;
+	reg &= ~CPUCFG_CX_RST_CTRL_H_RST;
+	reg &= ~CPUCFG_CX_RST_CTRL_L2_RST;
+
+	/*
+	 * Allwinner code also asserts resets for NEON on A15. According
+	 * to ARM manuals, asserting power-on reset is sufficient.
+	 */
+	if (!sunxi_core_is_cortex_a15(0, cluster))
+		reg &= ~CPUCFG_CX_RST_CTRL_ETM_RST_ALL;
+
+	writel(reg, cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+
+	/* hold L1/L2 reset disable signals low */
+	reg = readl(cpucfg_base + CPUCFG_CX_CTRL_REG0(cluster));
+	if (sunxi_core_is_cortex_a15(0, cluster)) {
+		/* Cortex-A15: hold L2RSTDISABLE low */
+		reg &= ~CPUCFG_CX_CTRL_REG0_L2_RST_DISABLE_A15;
+	} else {
+		/* Cortex-A7: hold L1RSTDISABLE and L2RSTDISABLE low */
+		reg &= ~CPUCFG_CX_CTRL_REG0_L1_RST_DISABLE_ALL;
+		reg &= ~CPUCFG_CX_CTRL_REG0_L2_RST_DISABLE_A7;
+	}
+	writel(reg, cpucfg_base + CPUCFG_CX_CTRL_REG0(cluster));
+
+	/* clear cluster power gate */
+	reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster));
+	reg &= ~PRCM_PWROFF_GATING_REG_CLUSTER;
+	writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster));
+	udelay(20);
+
+	/* de-assert cluster resets */
+	reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+	reg |= CPUCFG_CX_RST_CTRL_DBG_SOC_RST;
+	reg |= CPUCFG_CX_RST_CTRL_H_RST;
+	reg |= CPUCFG_CX_RST_CTRL_L2_RST;
+	writel(reg, cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+
+	/* de-assert ACINACTM */
+	reg = readl(cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster));
+	reg &= ~CPUCFG_CX_CTRL_REG1_ACINACTM;
+	writel(reg, cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster));
+
+	return 0;
+}
+
+/*
+ * This bit is shared between the initial nocache_trampoline call to
+ * enable CCI-400 and proper cluster cache disable before power down.
+ */
+static void sunxi_cluster_cache_disable_without_axi(void)
+{
+	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) {
+		/*
+		 * On the Cortex-A15 we need to disable
+		 * L2 prefetching before flushing the cache.
+		 */
+		asm volatile(
+		"mcr	p15, 1, %0, c15, c0, 3\n"
+		"isb\n"
+		"dsb"
+		: : "r" (0x400));
+	}
+
+	/* Flush all cache levels for this cluster. */
+	v7_exit_coherency_flush(all);
+
+	/*
+	 * Disable cluster-level coherency by masking
+	 * incoming snoops and DVM messages:
+	 */
+	cci_disable_port_by_cpu(read_cpuid_mpidr());
+}
+
+static int sunxi_mc_smp_cpu_table[SUNXI_NR_CLUSTERS][SUNXI_CPUS_PER_CLUSTER];
+static int sunxi_mc_smp_first_comer;
+
+/*
+ * Enable cluster-level coherency, in preparation for turning on the MMU.
+ *
+ * Also enable regional clock gating and L2 data latency settings for
+ * Cortex-A15. These settings are from the vendor kernel.
+ */
+static void __naked sunxi_mc_smp_cluster_cache_enable(void)
+{
+	asm volatile (
+		"mrc	p15, 0, r1, c0, c0, 0\n"
+		"movw	r2, #" __stringify(ARM_CPU_PART_MASK & 0xffff) "\n"
+		"movt	r2, #" __stringify(ARM_CPU_PART_MASK >> 16) "\n"
+		"and	r1, r1, r2\n"
+		"movw	r2, #" __stringify(ARM_CPU_PART_CORTEX_A15 & 0xffff) "\n"
+		"movt	r2, #" __stringify(ARM_CPU_PART_CORTEX_A15 >> 16) "\n"
+		"cmp	r1, r2\n"
+		"bne	not_a15\n"
+
+		/* The following is Cortex-A15 specific */
+
+		/* ACTLR2: Enable CPU regional clock gates */
+		"mrc p15, 1, r1, c15, c0, 4\n"
+		"orr r1, r1, #(0x1<<31)\n"
+		"mcr p15, 1, r1, c15, c0, 4\n"
+
+		/* L2ACTLR */
+		"mrc p15, 1, r1, c15, c0, 0\n"
+		/* Enable L2, GIC, and Timer regional clock gates */
+		"orr r1, r1, #(0x1<<26)\n"
+		/* Disable clean/evict from being pushed to external */
+		"orr r1, r1, #(0x1<<3)\n"
+		"mcr p15, 1, r1, c15, c0, 0\n"
+
+		/* L2CTRL: L2 data RAM latency */
+		"mrc p15, 1, r1, c9, c0, 2\n"
+		"bic r1, r1, #(0x7<<0)\n"
+		"orr r1, r1, #(0x3<<0)\n"
+		"mcr p15, 1, r1, c9, c0, 2\n"
+
+		/* End of Cortex-A15 specific setup */
+		"not_a15:\n"
+
+		/* Get value of sunxi_mc_smp_first_comer */
+		"adr	r1, first\n"
+		"ldr	r0, [r1]\n"
+		"ldr	r0, [r1, r0]\n"
+
+		/* Skip cci_enable_port_for_self if not first comer */
+		"cmp	r0, #0\n"
+		"bxeq	lr\n"
+		"b	cci_enable_port_for_self\n"
+
+		".align 2\n"
+		"first: .word sunxi_mc_smp_first_comer - .\n"
+	);
+}
+
+static void __naked sunxi_mc_smp_secondary_startup(void)
+{
+	asm volatile(
+		"bl	sunxi_mc_smp_cluster_cache_enable\n"
+		"b	secondary_startup"
+		/* Let compiler know about sunxi_mc_smp_cluster_cache_enable */
+		:: "i" (sunxi_mc_smp_cluster_cache_enable)
+	);
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+static bool sunxi_mc_smp_cluster_is_down(unsigned int cluster)
+{
+	int i;
+
+	for (i = 0; i < SUNXI_CPUS_PER_CLUSTER; i++)
+		if (sunxi_mc_smp_cpu_table[cluster][i])
+			return false;
+	return true;
+}
+
+static void sunxi_mc_smp_secondary_init(unsigned int cpu)
+{
+	/* Clear hotplug support magic flags for cpu0 */
+	if (cpu == 0)
+		sunxi_cpu0_hotplug_support_set(false);
+}
+
+static int sunxi_mc_smp_boot_secondary(unsigned int l_cpu, struct task_struct *idle)
+{
+	unsigned int mpidr, cpu, cluster;
+
+	mpidr = cpu_logical_map(l_cpu);
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+	if (!cpucfg_base)
+		return -ENODEV;
+	if (cluster >= SUNXI_NR_CLUSTERS || cpu >= SUNXI_CPUS_PER_CLUSTER)
+		return -EINVAL;
+
+	spin_lock_irq(&boot_lock);
+
+	if (sunxi_mc_smp_cpu_table[cluster][cpu])
+		goto out;
+
+	if (sunxi_mc_smp_cluster_is_down(cluster)) {
+		sunxi_mc_smp_first_comer = true;
+		sunxi_cluster_powerup(cluster);
+	} else {
+		sunxi_mc_smp_first_comer = false;
+	}
+
+	/* This is read by incoming CPUs with their cache and MMU disabled */
+	sync_cache_w(&sunxi_mc_smp_first_comer);
+	sunxi_cpu_powerup(cpu, cluster);
+
+out:
+	sunxi_mc_smp_cpu_table[cluster][cpu]++;
+	spin_unlock_irq(&boot_lock);
+
+	return 0;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void sunxi_cluster_cache_disable(void)
+{
+	unsigned int cluster = MPIDR_AFFINITY_LEVEL(read_cpuid_mpidr(), 1);
+	u32 reg;
+
+	pr_debug("%s: cluster %u\n", __func__, cluster);
+
+	sunxi_cluster_cache_disable_without_axi();
+
+	/* last man standing, assert ACINACTM */
+	reg = readl(cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster));
+	reg |= CPUCFG_CX_CTRL_REG1_ACINACTM;
+	writel(reg, cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster));
+}
+
+static void sunxi_mc_smp_cpu_die(unsigned int l_cpu)
+{
+	unsigned int mpidr, cpu, cluster;
+	bool last_man;
+
+	mpidr = cpu_logical_map(l_cpu);
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+	pr_debug("%s: cluster %u cpu %u\n", __func__, cluster, cpu);
+
+	spin_lock(&boot_lock);
+	sunxi_mc_smp_cpu_table[cluster][cpu]--;
+	if (sunxi_mc_smp_cpu_table[cluster][cpu] == 1) {
+		/* A power_up request went ahead of us. */
+		pr_debug("%s: aborting due to a power up request\n",
+			 __func__);
+		spin_unlock(&boot_lock);
+		return;
+	} else if (sunxi_mc_smp_cpu_table[cluster][cpu] > 1) {
+		pr_err("Cluster %d CPU%d boots multiple times\n",
+		       cluster, cpu);
+		BUG();
+	}
+
+	last_man = sunxi_mc_smp_cluster_is_down(cluster);
+	spin_unlock(&boot_lock);
+
+	gic_cpu_if_down(0);
+	if (last_man)
+		sunxi_cluster_cache_disable();
+	else
+		v7_exit_coherency_flush(louis);
+
+	for (;;)
+		wfi();
+}
+
+static int sunxi_cpu_powerdown(unsigned int cpu, unsigned int cluster)
+{
+	u32 reg;
+
+	pr_debug("%s: cluster %u cpu %u\n", __func__, cluster, cpu);
+	if (cpu >= SUNXI_CPUS_PER_CLUSTER || cluster >= SUNXI_NR_CLUSTERS)
+		return -EINVAL;
+
+	/* gate processor power */
+	reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster));
+	reg |= PRCM_PWROFF_GATING_REG_CORE(cpu);
+	writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster));
+	udelay(20);
+
+	/* close power switch */
+	sunxi_cpu_power_switch_set(cpu, cluster, false);
+
+	return 0;
+}
+
+static int sunxi_cluster_powerdown(unsigned int cluster)
+{
+	u32 reg;
+
+	pr_debug("%s: cluster %u\n", __func__, cluster);
+	if (cluster >= SUNXI_NR_CLUSTERS)
+		return -EINVAL;
+
+	/* assert cluster resets or system will hang */
+	pr_debug("%s: assert cluster reset\n", __func__);
+	reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+	reg &= ~CPUCFG_CX_RST_CTRL_DBG_SOC_RST;
+	reg &= ~CPUCFG_CX_RST_CTRL_H_RST;
+	reg &= ~CPUCFG_CX_RST_CTRL_L2_RST;
+	writel(reg, cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+
+	/* gate cluster power */
+	pr_debug("%s: gate cluster power\n", __func__);
+	reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster));
+	reg |= PRCM_PWROFF_GATING_REG_CLUSTER;
+	writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster));
+	udelay(20);
+
+	return 0;
+}
+
+static int sunxi_mc_smp_cpu_kill(unsigned int l_cpu)
+{
+	unsigned int mpidr, cpu, cluster;
+	unsigned int tries, count;
+	int ret = 0;
+	u32 reg;
+
+	mpidr = cpu_logical_map(l_cpu);
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+	/* This should never happen */
+	if (WARN_ON(cluster >= SUNXI_NR_CLUSTERS ||
+		    cpu >= SUNXI_CPUS_PER_CLUSTER))
+		return 0;
+
+	/* wait for CPU core to die and enter WFI */
+	count = TIMEOUT_USEC / POLL_USEC;
+	spin_lock_irq(&boot_lock);
+	for (tries = 0; tries < count; tries++) {
+		spin_unlock_irq(&boot_lock);
+		usleep_range(POLL_USEC / 2, POLL_USEC);
+		spin_lock_irq(&boot_lock);
+
+		/*
+		 * If the user turns off a bunch of cores at the same
+		 * time, the kernel might call cpu_kill before some of
+		 * them are ready. This is because boot_lock serializes
+		 * both cpu_die and cpu_kill callbacks. Either one could
+		 * run first. We should wait for cpu_die to complete.
+		 */
+		if (sunxi_mc_smp_cpu_table[cluster][cpu])
+			continue;
+
+		reg = readl(cpucfg_base + CPUCFG_CX_STATUS(cluster));
+		if (reg & CPUCFG_CX_STATUS_STANDBYWFI(cpu))
+			break;
+	}
+
+	if (tries >= count) {
+		ret = ETIMEDOUT;
+		goto out;
+	}
+
+	/* power down CPU core */
+	sunxi_cpu_powerdown(cpu, cluster);
+
+	if (!sunxi_mc_smp_cluster_is_down(cluster))
+		goto out;
+
+	/* wait for cluster L2 WFI */
+	ret = readl_poll_timeout(cpucfg_base + CPUCFG_CX_STATUS(cluster), reg,
+				 reg & CPUCFG_CX_STATUS_STANDBYWFIL2,
+				 POLL_USEC, TIMEOUT_USEC);
+	if (ret) {
+		/*
+		 * Ignore timeout on the cluster. Leaving the cluster on
+		 * will not affect system execution, just use a bit more
+		 * power. But returning an error here will only confuse
+		 * the user as the CPU has already been shutdown.
+		 */
+		ret = 0;
+		goto out;
+	}
+
+	/* Power down cluster */
+	sunxi_cluster_powerdown(cluster);
+
+out:
+	spin_unlock_irq(&boot_lock);
+	pr_debug("%s: cluster %u cpu %u powerdown: %d\n",
+		 __func__, cluster, cpu, ret);
+	return !ret;
+}
+
+static bool sunxi_mc_smp_cpu_can_disable(unsigned int __unused)
+{
+	return true;
+}
+#endif
+
+static const struct smp_operations sunxi_mc_smp_smp_ops __initconst = {
+	.smp_secondary_init	= sunxi_mc_smp_secondary_init,
+	.smp_boot_secondary	= sunxi_mc_smp_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= sunxi_mc_smp_cpu_die,
+	.cpu_kill		= sunxi_mc_smp_cpu_kill,
+	.cpu_can_disable	= sunxi_mc_smp_cpu_can_disable,
+#endif
+};
+
+static bool __init sunxi_mc_smp_cpu_table_init(void)
+{
+	unsigned int mpidr, cpu, cluster;
+
+	mpidr = read_cpuid_mpidr();
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+	if (cluster >= SUNXI_NR_CLUSTERS || cpu >= SUNXI_CPUS_PER_CLUSTER) {
+		pr_err("%s: boot CPU is out of bounds!\n", __func__);
+		return false;
+	}
+	sunxi_mc_smp_cpu_table[cluster][cpu] = 1;
+	return true;
+}
+
+/*
+ * Adapted from arch/arm/common/mc_smp_entry.c
+ *
+ * We need the trampoline code to enable CCI-400 on the first cluster
+ */
+typedef typeof(cpu_reset) phys_reset_t;
+
+static void __init __naked sunxi_mc_smp_resume(void)
+{
+	asm volatile(
+		"bl	sunxi_mc_smp_cluster_cache_enable\n"
+		"b	cpu_resume"
+		/* Let compiler know about sunxi_mc_smp_cluster_cache_enable */
+		:: "i" (sunxi_mc_smp_cluster_cache_enable)
+	);
+}
+
+static int __init nocache_trampoline(unsigned long __unused)
+{
+	phys_reset_t phys_reset;
+
+	setup_mm_for_reboot();
+	sunxi_cluster_cache_disable_without_axi();
+
+	phys_reset = (phys_reset_t)(unsigned long)__pa_symbol(cpu_reset);
+	phys_reset(__pa_symbol(sunxi_mc_smp_resume), false);
+	BUG();
+}
+
+static int __init sunxi_mc_smp_loopback(void)
+{
+	int ret;
+
+	/*
+	 * We're going to soft-restart the current CPU through the
+	 * low-level MCPM code by leveraging the suspend/resume
+	 * infrastructure. Let's play it safe by using cpu_pm_enter()
+	 * in case the CPU init code path resets the VFP or similar.
+	 */
+	sunxi_mc_smp_first_comer = true;
+	local_irq_disable();
+	local_fiq_disable();
+	ret = cpu_pm_enter();
+	if (!ret) {
+		ret = cpu_suspend(0, nocache_trampoline);
+		cpu_pm_exit();
+	}
+	local_fiq_enable();
+	local_irq_enable();
+	sunxi_mc_smp_first_comer = false;
+
+	return ret;
+}
+
+/*
+ * This holds any device nodes that we requested resources for,
+ * so that we may easily release resources in the error path.
+ */
+struct sunxi_mc_smp_nodes {
+	struct device_node *prcm_node;
+	struct device_node *cpucfg_node;
+	struct device_node *sram_node;
+};
+
+/* This structure holds SoC-specific bits tied to an enable-method string. */
+struct sunxi_mc_smp_data {
+	const char *enable_method;
+	int (*get_smp_nodes)(struct sunxi_mc_smp_nodes *nodes);
+};
+
+static void __init sunxi_mc_smp_put_nodes(struct sunxi_mc_smp_nodes *nodes)
+{
+	of_node_put(nodes->prcm_node);
+	of_node_put(nodes->cpucfg_node);
+	of_node_put(nodes->sram_node);
+	memset(nodes, 0, sizeof(*nodes));
+}
+
+static int __init sun9i_a80_get_smp_nodes(struct sunxi_mc_smp_nodes *nodes)
+{
+	nodes->prcm_node = of_find_compatible_node(NULL, NULL,
+						   "allwinner,sun9i-a80-prcm");
+	if (!nodes->prcm_node) {
+		pr_err("%s: PRCM not available\n", __func__);
+		return -ENODEV;
+	}
+
+	nodes->cpucfg_node = of_find_compatible_node(NULL, NULL,
+						     "allwinner,sun9i-a80-cpucfg");
+	if (!nodes->cpucfg_node) {
+		pr_err("%s: CPUCFG not available\n", __func__);
+		return -ENODEV;
+	}
+
+	nodes->sram_node = of_find_compatible_node(NULL, NULL,
+						   "allwinner,sun9i-a80-smp-sram");
+	if (!nodes->sram_node) {
+		pr_err("%s: Secure SRAM not available\n", __func__);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static const struct sunxi_mc_smp_data sunxi_mc_smp_data[] __initconst = {
+	{
+		.enable_method	= "allwinner,sun9i-a80-smp",
+		.get_smp_nodes	= sun9i_a80_get_smp_nodes,
+	},
+};
+
+static int __init sunxi_mc_smp_init(void)
+{
+	struct sunxi_mc_smp_nodes nodes = { 0 };
+	struct device_node *node;
+	struct resource res;
+	int i, ret;
+
+	/*
+	 * Don't bother checking the "cpus" node, as an enable-method
+	 * property in that node is undocumented.
+	 */
+	node = of_cpu_device_node_get(0);
+	if (!node)
+		return -ENODEV;
+
+	/*
+	 * We can't actually use the enable-method magic in the kernel.
+	 * Our loopback / trampoline code uses the CPU suspend framework,
+	 * which requires the identity mapping be available. It would not
+	 * yet be available if we used the .init_cpus or .prepare_cpus
+	 * callbacks in smp_operations, which we would use if we were to
+	 * use CPU_METHOD_OF_DECLARE
+	 */
+	for (i = 0; i < ARRAY_SIZE(sunxi_mc_smp_data); i++) {
+		ret = of_property_match_string(node, "enable-method",
+					       sunxi_mc_smp_data[i].enable_method);
+		if (!ret)
+			break;
+	}
+
+	of_node_put(node);
+	if (ret)
+		return -ENODEV;
+
+	if (!sunxi_mc_smp_cpu_table_init())
+		return -EINVAL;
+
+	if (!cci_probed()) {
+		pr_err("%s: CCI-400 not available\n", __func__);
+		return -ENODEV;
+	}
+
+	/* Get needed device tree nodes */
+	ret = sunxi_mc_smp_data[i].get_smp_nodes(&nodes);
+	if (ret)
+		goto err_put_nodes;
+
+	/*
+	 * Unfortunately we can not request the I/O region for the PRCM.
+	 * It is shared with the PRCM clock.
+	 */
+	prcm_base = of_iomap(nodes.prcm_node, 0);
+	if (!prcm_base) {
+		pr_err("%s: failed to map PRCM registers\n", __func__);
+		ret = -ENOMEM;
+		goto err_put_nodes;
+	}
+
+	cpucfg_base = of_io_request_and_map(nodes.cpucfg_node, 0,
+					    "sunxi-mc-smp");
+	if (IS_ERR(cpucfg_base)) {
+		ret = PTR_ERR(cpucfg_base);
+		pr_err("%s: failed to map CPUCFG registers: %d\n",
+		       __func__, ret);
+		goto err_unmap_prcm;
+	}
+
+	sram_b_smp_base = of_io_request_and_map(nodes.sram_node, 0,
+						"sunxi-mc-smp");
+	if (IS_ERR(sram_b_smp_base)) {
+		ret = PTR_ERR(sram_b_smp_base);
+		pr_err("%s: failed to map secure SRAM\n", __func__);
+		goto err_unmap_release_cpucfg;
+	}
+
+	/* Configure CCI-400 for boot cluster */
+	ret = sunxi_mc_smp_loopback();
+	if (ret) {
+		pr_err("%s: failed to configure boot cluster: %d\n",
+		       __func__, ret);
+		goto err_unmap_release_secure_sram;
+	}
+
+	/* We don't need the device nodes anymore */
+	sunxi_mc_smp_put_nodes(&nodes);
+
+	/* Set the hardware entry point address */
+	writel(__pa_symbol(sunxi_mc_smp_secondary_startup),
+	       prcm_base + PRCM_CPU_SOFT_ENTRY_REG);
+
+	/* Actually enable multi cluster SMP */
+	smp_set_ops(&sunxi_mc_smp_smp_ops);
+
+	pr_info("sunxi multi cluster SMP support installed\n");
+
+	return 0;
+
+err_unmap_release_secure_sram:
+	iounmap(sram_b_smp_base);
+	of_address_to_resource(nodes.sram_node, 0, &res);
+	release_mem_region(res.start, resource_size(&res));
+err_unmap_release_cpucfg:
+	iounmap(cpucfg_base);
+	of_address_to_resource(nodes.cpucfg_node, 0, &res);
+	release_mem_region(res.start, resource_size(&res));
+err_unmap_prcm:
+	iounmap(prcm_base);
+err_put_nodes:
+	sunxi_mc_smp_put_nodes(&nodes);
+	return ret;
+}
+
+early_initcall(sunxi_mc_smp_init);
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 7276afee30b3..afc1a1d4f7a5 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -106,12 +106,6 @@ config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
 	help
 	  PPA routine service ID for setting L2 auxiliary control register.
 
-config OMAP_DM_TIMER
-	bool "Use dual-mode timer"
-	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
-	help
-	 Select this option if you want to use OMAP Dual-Mode timers.
-
 config OMAP_SERIAL_WAKE
 	bool "Enable wake-up events for serial ports"
 	depends on ARCH_OMAP1 && OMAP_MUX
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 47e186729d44..7215ada707e4 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -9,5 +9,4 @@ obj-y := sram.o dma.o counter_32k.o
 
 # omap_device support (OMAP2+ only at the moment)
 
-obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
 obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 634b373785c4..ecf613761e78 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -31,7 +31,6 @@ CONFIG_PROFILING=y
 CONFIG_JUMP_LABEL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_ALPINE=y
 CONFIG_ARCH_BCM2835=y
@@ -51,11 +50,14 @@ CONFIG_ARCH_SEATTLE=y
 CONFIG_ARCH_RENESAS=y
 CONFIG_ARCH_R8A7795=y
 CONFIG_ARCH_R8A7796=y
+CONFIG_ARCH_R8A77965=y
 CONFIG_ARCH_R8A77970=y
+CONFIG_ARCH_R8A77980=y
 CONFIG_ARCH_R8A77995=y
 CONFIG_ARCH_STRATIX10=y
 CONFIG_ARCH_TEGRA=y
 CONFIG_ARCH_SPRD=y
+CONFIG_ARCH_SYNQUACER=y
 CONFIG_ARCH_THUNDER=y
 CONFIG_ARCH_THUNDER2=y
 CONFIG_ARCH_UNIPHIER=y
@@ -99,10 +101,19 @@ CONFIG_HIBERNATION=y
 CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
 CONFIG_ARM_CPUIDLE=y
 CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+CONFIG_CPU_FREQ_GOV_COMMON=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
 CONFIG_CPUFREQ_DT=y
 CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
 CONFIG_ARM_BIG_LITTLE_CPUFREQ=y
 CONFIG_ARM_SCPI_CPUFREQ=y
+CONFIG_ARM_TEGRA186_CPUFREQ=y
 CONFIG_ACPI_CPPC_CPUFREQ=m
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -209,7 +220,14 @@ CONFIG_QCOM_EMAC=m
 CONFIG_RAVB=y
 CONFIG_SMC91X=y
 CONFIG_SMSC911X=y
+CONFIG_SNI_AVE=y
+CONFIG_SNI_NETSEC=y
 CONFIG_STMMAC_ETH=m
+CONFIG_DWMAC_IPQ806X=m
+CONFIG_DWMAC_MESON=m
+CONFIG_DWMAC_ROCKCHIP=m
+CONFIG_DWMAC_SUNXI=m
+CONFIG_DWMAC_SUN8I=m
 CONFIG_MDIO_BUS_MUX_MMIOREG=y
 CONFIG_AT803X_PHY=m
 CONFIG_MARVELL_PHY=m
@@ -305,6 +323,7 @@ CONFIG_PINCTRL_MSM8996=y
 CONFIG_PINCTRL_QDF2XXX=y
 CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
 CONFIG_GPIO_DWAPB=y
+CONFIG_GPIO_MB86S7X=y
 CONFIG_GPIO_PL061=y
 CONFIG_GPIO_RCAR=y
 CONFIG_GPIO_UNIPHIER=y
@@ -327,7 +346,10 @@ CONFIG_THERMAL_EMULATION=y
 CONFIG_BRCMSTB_THERMAL=m
 CONFIG_EXYNOS_THERMAL=y
 CONFIG_RCAR_GEN3_THERMAL=y
+CONFIG_QCOM_TSENS=y
 CONFIG_ROCKCHIP_THERMAL=m
+CONFIG_TEGRA_BPMP_THERMAL=m
+CONFIG_UNIPHIER_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_S3C2410_WATCHDOG=y
 CONFIG_MESON_GXBB_WATCHDOG=m
@@ -444,12 +466,14 @@ CONFIG_NOP_USB_XCEIV=y
 CONFIG_USB_ULPI=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_RENESAS_USBHS_UDC=m
+CONFIG_USB_RENESAS_USB3=m
 CONFIG_USB_ULPI_BUS=y
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ACPI=y
+CONFIG_MMC_SDHCI_F_SDH30=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_OF_ARASAN=y
 CONFIG_MMC_SDHCI_OF_ESDHC=y
@@ -500,6 +524,7 @@ CONFIG_QCOM_BAM_DMA=y
 CONFIG_QCOM_HIDMA_MGMT=y
 CONFIG_QCOM_HIDMA=y
 CONFIG_RCAR_DMAC=y
+CONFIG_RENESAS_USB_DMAC=m
 CONFIG_VFIO=y
 CONFIG_VFIO_PCI=y
 CONFIG_VIRTIO_PCI=y
@@ -525,7 +550,9 @@ CONFIG_ARM_MHU=y
 CONFIG_PLATFORM_MHU=y
 CONFIG_BCM2835_MBOX=y
 CONFIG_HI6220_MBOX=y
+CONFIG_QCOM_APCS_IPC=y
 CONFIG_ROCKCHIP_IOMMU=y
+CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_ARM_SMMU=y
 CONFIG_ARM_SMMU_V3=y
 CONFIG_QCOM_IOMMU=y
@@ -539,7 +566,10 @@ CONFIG_ROCKCHIP_PM_DOMAINS=y
 CONFIG_ARCH_TEGRA_132_SOC=y
 CONFIG_ARCH_TEGRA_210_SOC=y
 CONFIG_ARCH_TEGRA_186_SOC=y
+CONFIG_ARCH_TEGRA_194_SOC=y
 CONFIG_EXTCON_USB_GPIO=y
+CONFIG_MEMORY=y
+CONFIG_TEGRA_MC=y
 CONFIG_IIO=y
 CONFIG_EXYNOS_ADC=y
 CONFIG_ROCKCHIP_SARADC=m
@@ -547,10 +577,12 @@ CONFIG_PWM=y
 CONFIG_PWM_BCM2835=m
 CONFIG_PWM_CROS_EC=m
 CONFIG_PWM_MESON=m
+CONFIG_PWM_RCAR=m
 CONFIG_PWM_ROCKCHIP=y
 CONFIG_PWM_SAMSUNG=y
 CONFIG_PWM_TEGRA=m
 CONFIG_PHY_RCAR_GEN3_USB2=y
+CONFIG_PHY_RCAR_GEN3_USB3=m
 CONFIG_PHY_HI6220_USB=y
 CONFIG_PHY_QCOM_USB_HS=y
 CONFIG_PHY_SUN4I_USB=y
@@ -562,6 +594,8 @@ CONFIG_PHY_XGENE=y
 CONFIG_PHY_TEGRA_XUSB=y
 CONFIG_QCOM_L2_PMU=y
 CONFIG_QCOM_L3_PMU=y
+CONFIG_MESON_EFUSE=m
+CONFIG_QCOM_QFPROM=y
 CONFIG_UNIPHIER_EFUSE=y
 CONFIG_TEE=y
 CONFIG_OPTEE=y
@@ -629,3 +663,6 @@ CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
 CONFIG_CRYPTO_AES_ARM64_NEON_BLK=m
 CONFIG_CRYPTO_CHACHA20_NEON=m
 CONFIG_CRYPTO_AES_ARM64_BS=m
+CONFIG_CRYPTO_SHA512_ARM64_CE=m
+CONFIG_CRYPTO_SHA3_ARM64=m
+CONFIG_CRYPTO_SM3_ARM64_CE=m
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index cdaeeea7999c..7cd2fd04b212 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -13,22 +13,20 @@
 
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/pm_domain.h>
 #include <linux/pm_runtime.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
+#include <linux/slab.h>
+
 #include <linux/platform_data/ti-sysc.h>
 
 #include <dt-bindings/bus/ti-sysc.h>
 
-enum sysc_registers {
-	SYSC_REVISION,
-	SYSC_SYSCONFIG,
-	SYSC_SYSSTATUS,
-	SYSC_MAX_REGS,
-};
-
 static const char * const reg_names[] = { "rev", "sysc", "syss", };
 
 enum sysc_clocks {
@@ -55,6 +53,7 @@ static const char * const clock_names[] = { "fck", "ick", };
  * @cfg: interconnect target module configuration
  * @name: name if available
  * @revision: interconnect target module revision
+ * @needs_resume: runtime resume needed on resume from suspend
  */
 struct sysc {
 	struct device *dev;
@@ -66,8 +65,13 @@ struct sysc {
 	const char *legacy_mode;
 	const struct sysc_capabilities *cap;
 	struct sysc_config cfg;
+	struct ti_sysc_cookie cookie;
 	const char *name;
 	u32 revision;
+	bool enabled;
+	bool needs_resume;
+	bool child_needs_resume;
+	struct delayed_work idle_work;
 };
 
 static u32 sysc_read(struct sysc *ddata, int offset)
@@ -136,9 +140,6 @@ static int sysc_get_clocks(struct sysc *ddata)
 {
 	int i, error;
 
-	if (ddata->legacy_mode)
-		return 0;
-
 	for (i = 0; i < SYSC_MAX_CLOCKS; i++) {
 		error = sysc_get_one_clock(ddata, i);
 		if (error && error != -ENOENT)
@@ -197,12 +198,53 @@ static int sysc_parse_and_check_child_range(struct sysc *ddata)
 	ddata->module_pa = of_translate_address(np, ranges++);
 	ddata->module_size = be32_to_cpup(ranges);
 
-	dev_dbg(ddata->dev, "interconnect target 0x%llx size 0x%x for %pOF\n",
-		ddata->module_pa, ddata->module_size, np);
-
 	return 0;
 }
 
+static struct device_node *stdout_path;
+
+static void sysc_init_stdout_path(struct sysc *ddata)
+{
+	struct device_node *np = NULL;
+	const char *uart;
+
+	if (IS_ERR(stdout_path))
+		return;
+
+	if (stdout_path)
+		return;
+
+	np = of_find_node_by_path("/chosen");
+	if (!np)
+		goto err;
+
+	uart = of_get_property(np, "stdout-path", NULL);
+	if (!uart)
+		goto err;
+
+	np = of_find_node_by_path(uart);
+	if (!np)
+		goto err;
+
+	stdout_path = np;
+
+	return;
+
+err:
+	stdout_path = ERR_PTR(-ENODEV);
+}
+
+static void sysc_check_quirk_stdout(struct sysc *ddata,
+				    struct device_node *np)
+{
+	sysc_init_stdout_path(ddata);
+	if (np != stdout_path)
+		return;
+
+	ddata->cfg.quirks |= SYSC_QUIRK_NO_IDLE_ON_INIT |
+				SYSC_QUIRK_NO_RESET_ON_INIT;
+}
+
 /**
  * sysc_check_one_child - check child configuration
  * @ddata: device driver data
@@ -221,6 +263,8 @@ static int sysc_check_one_child(struct sysc *ddata,
 	if (name)
 		dev_warn(ddata->dev, "really a child ti,hwmods property?");
 
+	sysc_check_quirk_stdout(ddata, np);
+
 	return 0;
 }
 
@@ -246,11 +290,8 @@ static int sysc_check_children(struct sysc *ddata)
  */
 static void sysc_check_quirk_16bit(struct sysc *ddata, struct resource *res)
 {
-	if (resource_size(res) == 8) {
-		dev_dbg(ddata->dev,
-			"enabling 16-bit and clockactivity quirks\n");
+	if (resource_size(res) == 8)
 		ddata->cfg.quirks |= SYSC_QUIRK_16BIT | SYSC_QUIRK_USE_CLOCKACT;
-	}
 }
 
 /**
@@ -276,7 +317,6 @@ static int sysc_parse_one(struct sysc *ddata, enum sysc_registers reg)
 	res = platform_get_resource_byname(to_platform_device(ddata->dev),
 					   IORESOURCE_MEM, name);
 	if (!res) {
-		dev_dbg(ddata->dev, "has no %s register\n", name);
 		ddata->offsets[reg] = -ENODEV;
 
 		return 0;
@@ -437,6 +477,14 @@ static int sysc_show_reg(struct sysc *ddata,
 	return sprintf(bufp, ":%x", ddata->offsets[reg]);
 }
 
+static int sysc_show_name(char *bufp, struct sysc *ddata)
+{
+	if (!ddata->name)
+		return 0;
+
+	return sprintf(bufp, ":%s", ddata->name);
+}
+
 /**
  * sysc_show_registers - show information about interconnect target module
  * @ddata: device driver data
@@ -451,6 +499,7 @@ static void sysc_show_registers(struct sysc *ddata)
 		bufp += sysc_show_reg(ddata, bufp, i);
 
 	bufp += sysc_show_rev(bufp, ddata);
+	bufp += sysc_show_name(bufp, ddata);
 
 	dev_dbg(ddata->dev, "%llx:%x%s\n",
 		ddata->module_pa, ddata->module_size,
@@ -459,33 +508,70 @@ static void sysc_show_registers(struct sysc *ddata)
 
 static int __maybe_unused sysc_runtime_suspend(struct device *dev)
 {
+	struct ti_sysc_platform_data *pdata;
 	struct sysc *ddata;
-	int i;
+	int error = 0, i;
 
 	ddata = dev_get_drvdata(dev);
 
-	if (ddata->legacy_mode)
+	if (!ddata->enabled)
 		return 0;
 
+	if (ddata->legacy_mode) {
+		pdata = dev_get_platdata(ddata->dev);
+		if (!pdata)
+			return 0;
+
+		if (!pdata->idle_module)
+			return -ENODEV;
+
+		error = pdata->idle_module(dev, &ddata->cookie);
+		if (error)
+			dev_err(dev, "%s: could not idle: %i\n",
+				__func__, error);
+
+		goto idled;
+	}
+
 	for (i = 0; i < SYSC_MAX_CLOCKS; i++) {
 		if (IS_ERR_OR_NULL(ddata->clocks[i]))
 			continue;
 		clk_disable(ddata->clocks[i]);
 	}
 
-	return 0;
+idled:
+	ddata->enabled = false;
+
+	return error;
 }
 
 static int __maybe_unused sysc_runtime_resume(struct device *dev)
 {
+	struct ti_sysc_platform_data *pdata;
 	struct sysc *ddata;
-	int i, error;
+	int error = 0, i;
 
 	ddata = dev_get_drvdata(dev);
 
-	if (ddata->legacy_mode)
+	if (ddata->enabled)
 		return 0;
 
+	if (ddata->legacy_mode) {
+		pdata = dev_get_platdata(ddata->dev);
+		if (!pdata)
+			return 0;
+
+		if (!pdata->enable_module)
+			return -ENODEV;
+
+		error = pdata->enable_module(dev, &ddata->cookie);
+		if (error)
+			dev_err(dev, "%s: could not enable: %i\n",
+				__func__, error);
+
+		goto awake;
+	}
+
 	for (i = 0; i < SYSC_MAX_CLOCKS; i++) {
 		if (IS_ERR_OR_NULL(ddata->clocks[i]))
 			continue;
@@ -494,20 +580,136 @@ static int __maybe_unused sysc_runtime_resume(struct device *dev)
 			return error;
 	}
 
+awake:
+	ddata->enabled = true;
+
+	return error;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sysc_suspend(struct device *dev)
+{
+	struct sysc *ddata;
+
+	ddata = dev_get_drvdata(dev);
+
+	if (!ddata->enabled)
+		return 0;
+
+	ddata->needs_resume = true;
+
+	return sysc_runtime_suspend(dev);
+}
+
+static int sysc_resume(struct device *dev)
+{
+	struct sysc *ddata;
+
+	ddata = dev_get_drvdata(dev);
+	if (ddata->needs_resume) {
+		ddata->needs_resume = false;
+
+		return sysc_runtime_resume(dev);
+	}
+
 	return 0;
 }
+#endif
 
 static const struct dev_pm_ops sysc_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(sysc_suspend, sysc_resume)
 	SET_RUNTIME_PM_OPS(sysc_runtime_suspend,
 			   sysc_runtime_resume,
 			   NULL)
 };
 
+/* Module revision register based quirks */
+struct sysc_revision_quirk {
+	const char *name;
+	u32 base;
+	int rev_offset;
+	int sysc_offset;
+	int syss_offset;
+	u32 revision;
+	u32 revision_mask;
+	u32 quirks;
+};
+
+#define SYSC_QUIRK(optname, optbase, optrev, optsysc, optsyss,		\
+		   optrev_val, optrevmask, optquirkmask)		\
+	{								\
+		.name = (optname),					\
+		.base = (optbase),					\
+		.rev_offset = (optrev),					\
+		.sysc_offset = (optsysc),				\
+		.syss_offset = (optsyss),				\
+		.revision = (optrev_val),				\
+		.revision_mask = (optrevmask),				\
+		.quirks = (optquirkmask),				\
+	}
+
+static const struct sysc_revision_quirk sysc_revision_quirks[] = {
+	/* These drivers need to be fixed to not use pm_runtime_irq_safe() */
+	SYSC_QUIRK("gpio", 0, 0, 0x10, 0x114, 0x50600801, 0xffffffff,
+		   SYSC_QUIRK_LEGACY_IDLE),
+	SYSC_QUIRK("mmu", 0, 0, 0x10, 0x14, 0x00000020, 0xffffffff,
+		   SYSC_QUIRK_LEGACY_IDLE),
+	SYSC_QUIRK("mmu", 0, 0, 0x10, 0x14, 0x00000030, 0xffffffff,
+		   SYSC_QUIRK_LEGACY_IDLE),
+	SYSC_QUIRK("sham", 0, 0x100, 0x110, 0x114, 0x40000c03, 0xffffffff,
+		   SYSC_QUIRK_LEGACY_IDLE),
+	SYSC_QUIRK("smartreflex", 0, -1, 0x24, -1, 0x00000000, 0xffffffff,
+		   SYSC_QUIRK_LEGACY_IDLE),
+	SYSC_QUIRK("smartreflex", 0, -1, 0x38, -1, 0x00000000, 0xffffffff,
+		   SYSC_QUIRK_LEGACY_IDLE),
+	SYSC_QUIRK("timer", 0, 0, 0x10, 0x14, 0x00000015, 0xffffffff,
+		   SYSC_QUIRK_LEGACY_IDLE),
+	SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000052, 0xffffffff,
+		   SYSC_QUIRK_LEGACY_IDLE),
+};
+
+static void sysc_init_revision_quirks(struct sysc *ddata)
+{
+	const struct sysc_revision_quirk *q;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(sysc_revision_quirks); i++) {
+		q = &sysc_revision_quirks[i];
+
+		if (q->base && q->base != ddata->module_pa)
+			continue;
+
+		if (q->rev_offset >= 0 &&
+		    q->rev_offset != ddata->offsets[SYSC_REVISION])
+			continue;
+
+		if (q->sysc_offset >= 0 &&
+		    q->sysc_offset != ddata->offsets[SYSC_SYSCONFIG])
+			continue;
+
+		if (q->syss_offset >= 0 &&
+		    q->syss_offset != ddata->offsets[SYSC_SYSSTATUS])
+			continue;
+
+		if (q->revision == ddata->revision ||
+		    (q->revision & q->revision_mask) ==
+		    (ddata->revision & q->revision_mask)) {
+			ddata->name = q->name;
+			ddata->cfg.quirks |= q->quirks;
+		}
+	}
+}
+
 /* At this point the module is configured enough to read the revision */
 static int sysc_init_module(struct sysc *ddata)
 {
 	int error;
 
+	if (ddata->cfg.quirks & SYSC_QUIRK_NO_IDLE_ON_INIT) {
+		ddata->revision = sysc_read_revision(ddata);
+		goto rev_quirks;
+	}
+
 	error = pm_runtime_get_sync(ddata->dev);
 	if (error < 0) {
 		pm_runtime_put_noidle(ddata->dev);
@@ -517,6 +719,9 @@ static int sysc_init_module(struct sysc *ddata)
 	ddata->revision = sysc_read_revision(ddata);
 	pm_runtime_put_sync(ddata->dev);
 
+rev_quirks:
+	sysc_init_revision_quirks(ddata);
+
 	return 0;
 }
 
@@ -605,6 +810,196 @@ static int sysc_init_syss_mask(struct sysc *ddata)
 	return 0;
 }
 
+/*
+ * Many child device drivers need to have fck available to get the clock
+ * rate for device internal configuration.
+ */
+static int sysc_child_add_fck(struct sysc *ddata,
+			      struct device *child)
+{
+	struct clk *fck;
+	struct clk_lookup *l;
+	const char *name = clock_names[SYSC_FCK];
+
+	if (IS_ERR_OR_NULL(ddata->clocks[SYSC_FCK]))
+		return 0;
+
+	fck = clk_get(child, name);
+	if (!IS_ERR(fck)) {
+		clk_put(fck);
+
+		return -EEXIST;
+	}
+
+	l = clkdev_create(ddata->clocks[SYSC_FCK], name, dev_name(child));
+
+	return l ? 0 : -ENODEV;
+}
+
+static struct device_type sysc_device_type = {
+};
+
+static struct sysc *sysc_child_to_parent(struct device *dev)
+{
+	struct device *parent = dev->parent;
+
+	if (!parent || parent->type != &sysc_device_type)
+		return NULL;
+
+	return dev_get_drvdata(parent);
+}
+
+static int __maybe_unused sysc_child_runtime_suspend(struct device *dev)
+{
+	struct sysc *ddata;
+	int error;
+
+	ddata = sysc_child_to_parent(dev);
+
+	error = pm_generic_runtime_suspend(dev);
+	if (error)
+		return error;
+
+	if (!ddata->enabled)
+		return 0;
+
+	return sysc_runtime_suspend(ddata->dev);
+}
+
+static int __maybe_unused sysc_child_runtime_resume(struct device *dev)
+{
+	struct sysc *ddata;
+	int error;
+
+	ddata = sysc_child_to_parent(dev);
+
+	if (!ddata->enabled) {
+		error = sysc_runtime_resume(ddata->dev);
+		if (error < 0)
+			dev_err(ddata->dev,
+				"%s error: %i\n", __func__, error);
+	}
+
+	return pm_generic_runtime_resume(dev);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sysc_child_suspend_noirq(struct device *dev)
+{
+	struct sysc *ddata;
+	int error;
+
+	ddata = sysc_child_to_parent(dev);
+
+	error = pm_generic_suspend_noirq(dev);
+	if (error)
+		return error;
+
+	if (!pm_runtime_status_suspended(dev)) {
+		error = pm_generic_runtime_suspend(dev);
+		if (error)
+			return error;
+
+		error = sysc_runtime_suspend(ddata->dev);
+		if (error)
+			return error;
+
+		ddata->child_needs_resume = true;
+	}
+
+	return 0;
+}
+
+static int sysc_child_resume_noirq(struct device *dev)
+{
+	struct sysc *ddata;
+	int error;
+
+	ddata = sysc_child_to_parent(dev);
+
+	if (ddata->child_needs_resume) {
+		ddata->child_needs_resume = false;
+
+		error = sysc_runtime_resume(ddata->dev);
+		if (error)
+			dev_err(ddata->dev,
+				"%s runtime resume error: %i\n",
+				__func__, error);
+
+		error = pm_generic_runtime_resume(dev);
+		if (error)
+			dev_err(ddata->dev,
+				"%s generic runtime resume: %i\n",
+				__func__, error);
+	}
+
+	return pm_generic_resume_noirq(dev);
+}
+#endif
+
+struct dev_pm_domain sysc_child_pm_domain = {
+	.ops = {
+		SET_RUNTIME_PM_OPS(sysc_child_runtime_suspend,
+				   sysc_child_runtime_resume,
+				   NULL)
+		USE_PLATFORM_PM_SLEEP_OPS
+		SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(sysc_child_suspend_noirq,
+					      sysc_child_resume_noirq)
+	}
+};
+
+/**
+ * sysc_legacy_idle_quirk - handle children in omap_device compatible way
+ * @ddata: device driver data
+ * @child: child device driver
+ *
+ * Allow idle for child devices as done with _od_runtime_suspend().
+ * Otherwise many child devices will not idle because of the permanent
+ * parent usecount set in pm_runtime_irq_safe().
+ *
+ * Note that the long term solution is to just modify the child device
+ * drivers to not set pm_runtime_irq_safe() and then this can be just
+ * dropped.
+ */
+static void sysc_legacy_idle_quirk(struct sysc *ddata, struct device *child)
+{
+	if (!ddata->legacy_mode)
+		return;
+
+	if (ddata->cfg.quirks & SYSC_QUIRK_LEGACY_IDLE)
+		dev_pm_domain_set(child, &sysc_child_pm_domain);
+}
+
+static int sysc_notifier_call(struct notifier_block *nb,
+			      unsigned long event, void *device)
+{
+	struct device *dev = device;
+	struct sysc *ddata;
+	int error;
+
+	ddata = sysc_child_to_parent(dev);
+	if (!ddata)
+		return NOTIFY_DONE;
+
+	switch (event) {
+	case BUS_NOTIFY_ADD_DEVICE:
+		error = sysc_child_add_fck(ddata, dev);
+		if (error && error != -EEXIST)
+			dev_warn(ddata->dev, "could not add %s fck: %i\n",
+				 dev_name(dev), error);
+		sysc_legacy_idle_quirk(ddata, dev);
+		break;
+	default:
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block sysc_nb = {
+	.notifier_call = sysc_notifier_call,
+};
+
 /* Device tree configured quirks */
 struct sysc_dts_quirk {
 	const char *name;
@@ -797,7 +1192,8 @@ static const struct sysc_capabilities sysc_34xx_sr = {
 	.type = TI_SYSC_OMAP34XX_SR,
 	.sysc_mask = SYSC_OMAP2_CLOCKACTIVITY,
 	.regbits = &sysc_regbits_omap34xx_sr,
-	.mod_quirks = SYSC_QUIRK_USE_CLOCKACT | SYSC_QUIRK_UNCACHED,
+	.mod_quirks = SYSC_QUIRK_USE_CLOCKACT | SYSC_QUIRK_UNCACHED |
+		      SYSC_QUIRK_LEGACY_IDLE,
 };
 
 /*
@@ -818,12 +1214,13 @@ static const struct sysc_capabilities sysc_36xx_sr = {
 	.type = TI_SYSC_OMAP36XX_SR,
 	.sysc_mask = SYSC_OMAP3_SR_ENAWAKEUP,
 	.regbits = &sysc_regbits_omap36xx_sr,
-	.mod_quirks = SYSC_QUIRK_UNCACHED,
+	.mod_quirks = SYSC_QUIRK_UNCACHED | SYSC_QUIRK_LEGACY_IDLE,
 };
 
 static const struct sysc_capabilities sysc_omap4_sr = {
 	.type = TI_SYSC_OMAP4_SR,
 	.regbits = &sysc_regbits_omap36xx_sr,
+	.mod_quirks = SYSC_QUIRK_LEGACY_IDLE,
 };
 
 /*
@@ -865,6 +1262,33 @@ static const struct sysc_capabilities sysc_omap4_usb_host_fs = {
 	.regbits = &sysc_regbits_omap4_usb_host_fs,
 };
 
+static int sysc_init_pdata(struct sysc *ddata)
+{
+	struct ti_sysc_platform_data *pdata = dev_get_platdata(ddata->dev);
+	struct ti_sysc_module_data mdata;
+	int error = 0;
+
+	if (!pdata || !ddata->legacy_mode)
+		return 0;
+
+	mdata.name = ddata->legacy_mode;
+	mdata.module_pa = ddata->module_pa;
+	mdata.module_size = ddata->module_size;
+	mdata.offsets = ddata->offsets;
+	mdata.nr_offsets = SYSC_MAX_REGS;
+	mdata.cap = ddata->cap;
+	mdata.cfg = &ddata->cfg;
+
+	if (!pdata->init_module)
+		return -ENODEV;
+
+	error = pdata->init_module(ddata->dev, &mdata, &ddata->cookie);
+	if (error == -EEXIST)
+		error = 0;
+
+	return error;
+}
+
 static int sysc_init_match(struct sysc *ddata)
 {
 	const struct sysc_capabilities *cap;
@@ -880,8 +1304,19 @@ static int sysc_init_match(struct sysc *ddata)
 	return 0;
 }
 
+static void ti_sysc_idle(struct work_struct *work)
+{
+	struct sysc *ddata;
+
+	ddata = container_of(work, struct sysc, idle_work.work);
+
+	if (pm_runtime_active(ddata->dev))
+		pm_runtime_put_sync(ddata->dev);
+}
+
 static int sysc_probe(struct platform_device *pdev)
 {
+	struct ti_sysc_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	struct sysc *ddata;
 	int error;
 
@@ -920,6 +1355,10 @@ static int sysc_probe(struct platform_device *pdev)
 	if (error)
 		goto unprepare;
 
+	error = sysc_init_pdata(ddata);
+	if (error)
+		goto unprepare;
+
 	pm_runtime_enable(ddata->dev);
 
 	error = sysc_init_module(ddata);
@@ -933,22 +1372,28 @@ static int sysc_probe(struct platform_device *pdev)
 		goto unprepare;
 	}
 
-	pm_runtime_use_autosuspend(ddata->dev);
-
 	sysc_show_registers(ddata);
 
+	ddata->dev->type = &sysc_device_type;
 	error = of_platform_populate(ddata->dev->of_node,
-				     NULL, NULL, ddata->dev);
+				     NULL, pdata ? pdata->auxdata : NULL,
+				     ddata->dev);
 	if (error)
 		goto err;
 
-	pm_runtime_mark_last_busy(ddata->dev);
-	pm_runtime_put_autosuspend(ddata->dev);
+	INIT_DELAYED_WORK(&ddata->idle_work, ti_sysc_idle);
+
+	/* At least earlycon won't survive without deferred idle */
+	if (ddata->cfg.quirks & (SYSC_QUIRK_NO_IDLE_ON_INIT |
+				 SYSC_QUIRK_NO_RESET_ON_INIT)) {
+		schedule_delayed_work(&ddata->idle_work, 3000);
+	} else {
+		pm_runtime_put(&pdev->dev);
+	}
 
 	return 0;
 
 err:
-	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 unprepare:
@@ -962,6 +1407,8 @@ static int sysc_remove(struct platform_device *pdev)
 	struct sysc *ddata = platform_get_drvdata(pdev);
 	int error;
 
+	cancel_delayed_work_sync(&ddata->idle_work);
+
 	error = pm_runtime_get_sync(ddata->dev);
 	if (error < 0) {
 		pm_runtime_put_noidle(ddata->dev);
@@ -971,7 +1418,6 @@ static int sysc_remove(struct platform_device *pdev)
 
 	of_platform_depopulate(&pdev->dev);
 
-	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
@@ -1008,7 +1454,21 @@ static struct platform_driver sysc_driver = {
 		.pm = &sysc_pm_ops,
 	},
 };
-module_platform_driver(sysc_driver);
+
+static int __init sysc_init(void)
+{
+	bus_register_notifier(&platform_bus_type, &sysc_nb);
+
+	return platform_driver_register(&sysc_driver);
+}
+module_init(sysc_init);
+
+static void __exit sysc_exit(void)
+{
+	bus_unregister_notifier(&platform_bus_type, &sysc_nb);
+	platform_driver_unregister(&sysc_driver);
+}
+module_exit(sysc_exit);
 
 MODULE_DESCRIPTION("TI sysc interconnect target driver");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 6021a5af21da..9ee2888275c1 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -21,6 +21,9 @@ config CLKEVT_I8253
 config I8253_LOCK
 	bool
 
+config OMAP_DM_TIMER
+	bool
+
 config CLKBLD_I8253
 	def_bool y if CLKSRC_I8253 || CLKEVT_I8253 || I8253_LOCK
 
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index f0cb07637a65..e8e76dfef00b 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_EM_TIMER_STI)	+= em_sti.o
 obj-$(CONFIG_CLKBLD_I8253)	+= i8253.o
 obj-$(CONFIG_CLKSRC_MMIO)	+= mmio.o
 obj-$(CONFIG_DIGICOLOR_TIMER)	+= timer-digicolor.o
+obj-$(CONFIG_OMAP_DM_TIMER)	+= timer-ti-dm.o
 obj-$(CONFIG_DW_APB_TIMER)	+= dw_apb_timer.o
 obj-$(CONFIG_DW_APB_TIMER_OF)	+= dw_apb_timer_of.o
 obj-$(CONFIG_FTTMR010_TIMER)	+= timer-fttmr010.o
diff --git a/arch/arm/plat-omap/dmtimer.c b/drivers/clocksource/timer-ti-dm.c
index 8805a59bae53..4cce6b224b87 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/drivers/clocksource/timer-ti-dm.c
@@ -47,7 +47,7 @@
 #include <linux/platform_device.h>
 #include <linux/platform_data/dmtimer-omap.h>
 
-#include <plat/dmtimer.h>
+#include <clocksource/timer-ti-dm.h>
 
 static u32 omap_reserved_systimers;
 static LIST_HEAD(omap_timer_list);
@@ -163,6 +163,86 @@ static int omap_dm_timer_of_set_source(struct omap_dm_timer *timer)
 	return ret;
 }
 
+static int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
+{
+	int ret;
+	const char *parent_name;
+	struct clk *parent;
+	struct dmtimer_platform_data *pdata;
+
+	if (unlikely(!timer) || IS_ERR(timer->fclk))
+		return -EINVAL;
+
+	switch (source) {
+	case OMAP_TIMER_SRC_SYS_CLK:
+		parent_name = "timer_sys_ck";
+		break;
+	case OMAP_TIMER_SRC_32_KHZ:
+		parent_name = "timer_32k_ck";
+		break;
+	case OMAP_TIMER_SRC_EXT_CLK:
+		parent_name = "timer_ext_ck";
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	pdata = timer->pdev->dev.platform_data;
+
+	/*
+	 * FIXME: Used for OMAP1 devices only because they do not currently
+	 * use the clock framework to set the parent clock. To be removed
+	 * once OMAP1 migrated to using clock framework for dmtimers
+	 */
+	if (pdata && pdata->set_timer_src)
+		return pdata->set_timer_src(timer->pdev, source);
+
+#if defined(CONFIG_COMMON_CLK)
+	/* Check if the clock has configurable parents */
+	if (clk_hw_get_num_parents(__clk_get_hw(timer->fclk)) < 2)
+		return 0;
+#endif
+
+	parent = clk_get(&timer->pdev->dev, parent_name);
+	if (IS_ERR(parent)) {
+		pr_err("%s: %s not found\n", __func__, parent_name);
+		return -EINVAL;
+	}
+
+	ret = clk_set_parent(timer->fclk, parent);
+	if (ret < 0)
+		pr_err("%s: failed to set %s as parent\n", __func__,
+			parent_name);
+
+	clk_put(parent);
+
+	return ret;
+}
+
+static void omap_dm_timer_enable(struct omap_dm_timer *timer)
+{
+	int c;
+
+	pm_runtime_get_sync(&timer->pdev->dev);
+
+	if (!(timer->capability & OMAP_TIMER_ALWON)) {
+		if (timer->get_context_loss_count) {
+			c = timer->get_context_loss_count(&timer->pdev->dev);
+			if (c != timer->ctx_loss_count) {
+				omap_timer_restore_context(timer);
+				timer->ctx_loss_count = c;
+			}
+		} else {
+			omap_timer_restore_context(timer);
+		}
+	}
+}
+
+static void omap_dm_timer_disable(struct omap_dm_timer *timer)
+{
+	pm_runtime_put_sync(&timer->pdev->dev);
+}
+
 static int omap_dm_timer_prepare(struct omap_dm_timer *timer)
 {
 	int rc;
@@ -298,24 +378,22 @@ found:
 	return timer;
 }
 
-struct omap_dm_timer *omap_dm_timer_request(void)
+static struct omap_dm_timer *omap_dm_timer_request(void)
 {
 	return _omap_dm_timer_request(REQUEST_ANY, NULL);
 }
-EXPORT_SYMBOL_GPL(omap_dm_timer_request);
 
-struct omap_dm_timer *omap_dm_timer_request_specific(int id)
+static struct omap_dm_timer *omap_dm_timer_request_specific(int id)
 {
 	/* Requesting timer by ID is not supported when device tree is used */
 	if (of_have_populated_dt()) {
-		pr_warn("%s: Please use omap_dm_timer_request_by_cap/node()\n",
+		pr_warn("%s: Please use omap_dm_timer_request_by_node()\n",
 			__func__);
 		return NULL;
 	}
 
 	return _omap_dm_timer_request(REQUEST_BY_ID, &id);
 }
-EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific);
 
 /**
  * omap_dm_timer_request_by_cap - Request a timer by capability
@@ -330,7 +408,6 @@ struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap)
 {
 	return _omap_dm_timer_request(REQUEST_BY_CAP, &cap);
 }
-EXPORT_SYMBOL_GPL(omap_dm_timer_request_by_cap);
 
 /**
  * omap_dm_timer_request_by_node - Request a timer by device-tree node
@@ -339,16 +416,15 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_request_by_cap);
  * Request a timer based upon a device node pointer. Returns pointer to
  * timer handle on success and a NULL pointer on failure.
  */
-struct omap_dm_timer *omap_dm_timer_request_by_node(struct device_node *np)
+static struct omap_dm_timer *omap_dm_timer_request_by_node(struct device_node *np)
 {
 	if (!np)
 		return NULL;
 
 	return _omap_dm_timer_request(REQUEST_BY_NODE, np);
 }
-EXPORT_SYMBOL_GPL(omap_dm_timer_request_by_node);
 
-int omap_dm_timer_free(struct omap_dm_timer *timer)
+static int omap_dm_timer_free(struct omap_dm_timer *timer)
 {
 	if (unlikely(!timer))
 		return -EINVAL;
@@ -359,33 +435,6 @@ int omap_dm_timer_free(struct omap_dm_timer *timer)
 	timer->reserved = 0;
 	return 0;
 }
-EXPORT_SYMBOL_GPL(omap_dm_timer_free);
-
-void omap_dm_timer_enable(struct omap_dm_timer *timer)
-{
-	int c;
-
-	pm_runtime_get_sync(&timer->pdev->dev);
-
-	if (!(timer->capability & OMAP_TIMER_ALWON)) {
-		if (timer->get_context_loss_count) {
-			c = timer->get_context_loss_count(&timer->pdev->dev);
-			if (c != timer->ctx_loss_count) {
-				omap_timer_restore_context(timer);
-				timer->ctx_loss_count = c;
-			}
-		} else {
-			omap_timer_restore_context(timer);
-		}
-	}
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
-
-void omap_dm_timer_disable(struct omap_dm_timer *timer)
-{
-	pm_runtime_put_sync(&timer->pdev->dev);
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_disable);
 
 int omap_dm_timer_get_irq(struct omap_dm_timer *timer)
 {
@@ -393,10 +442,15 @@ int omap_dm_timer_get_irq(struct omap_dm_timer *timer)
 		return timer->irq;
 	return -EINVAL;
 }
-EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq);
 
 #if defined(CONFIG_ARCH_OMAP1)
 #include <mach/hardware.h>
+
+static struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
+{
+	return NULL;
+}
+
 /**
  * omap_dm_timer_modify_idlect_mask - Check if any running timers use ARMXOR
  * @inputmask: current value of idlect mask
@@ -429,17 +483,15 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
 
 	return inputmask;
 }
-EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
 
 #else
 
-struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
+static struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
 {
 	if (timer && !IS_ERR(timer->fclk))
 		return timer->fclk;
 	return NULL;
 }
-EXPORT_SYMBOL_GPL(omap_dm_timer_get_fclk);
 
 __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
 {
@@ -447,7 +499,6 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
 
 #endif
 
@@ -461,9 +512,8 @@ int omap_dm_timer_trigger(struct omap_dm_timer *timer)
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
 	return 0;
 }
-EXPORT_SYMBOL_GPL(omap_dm_timer_trigger);
 
-int omap_dm_timer_start(struct omap_dm_timer *timer)
+static int omap_dm_timer_start(struct omap_dm_timer *timer)
 {
 	u32 l;
 
@@ -482,9 +532,8 @@ int omap_dm_timer_start(struct omap_dm_timer *timer)
 	timer->context.tclr = l;
 	return 0;
 }
-EXPORT_SYMBOL_GPL(omap_dm_timer_start);
 
-int omap_dm_timer_stop(struct omap_dm_timer *timer)
+static int omap_dm_timer_stop(struct omap_dm_timer *timer)
 {
 	unsigned long rate = 0;
 
@@ -506,73 +555,9 @@ int omap_dm_timer_stop(struct omap_dm_timer *timer)
 	omap_dm_timer_disable(timer);
 	return 0;
 }
-EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
-
-int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
-{
-	int ret;
-	char *parent_name = NULL;
-	struct clk *parent;
-	struct dmtimer_platform_data *pdata;
-
-	if (unlikely(!timer))
-		return -EINVAL;
-
-	pdata = timer->pdev->dev.platform_data;
-
-	if (source < 0 || source >= 3)
-		return -EINVAL;
-
-	/*
-	 * FIXME: Used for OMAP1 devices only because they do not currently
-	 * use the clock framework to set the parent clock. To be removed
-	 * once OMAP1 migrated to using clock framework for dmtimers
-	 */
-	if (pdata && pdata->set_timer_src)
-		return pdata->set_timer_src(timer->pdev, source);
-
-	if (IS_ERR(timer->fclk))
-		return -EINVAL;
-
-#if defined(CONFIG_COMMON_CLK)
-	/* Check if the clock has configurable parents */
-	if (clk_hw_get_num_parents(__clk_get_hw(timer->fclk)) < 2)
-		return 0;
-#endif
-
-	switch (source) {
-	case OMAP_TIMER_SRC_SYS_CLK:
-		parent_name = "timer_sys_ck";
-		break;
-
-	case OMAP_TIMER_SRC_32_KHZ:
-		parent_name = "timer_32k_ck";
-		break;
-
-	case OMAP_TIMER_SRC_EXT_CLK:
-		parent_name = "timer_ext_ck";
-		break;
-	}
-
-	parent = clk_get(&timer->pdev->dev, parent_name);
-	if (IS_ERR(parent)) {
-		pr_err("%s: %s not found\n", __func__, parent_name);
-		return -EINVAL;
-	}
-
-	ret = clk_set_parent(timer->fclk, parent);
-	if (ret < 0)
-		pr_err("%s: failed to set %s as parent\n", __func__,
-			parent_name);
-
-	clk_put(parent);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
 
-int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
-			    unsigned int load)
+static int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
+				  unsigned int load)
 {
 	u32 l;
 
@@ -595,7 +580,6 @@ int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
 	omap_dm_timer_disable(timer);
 	return 0;
 }
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_load);
 
 /* Optimized set_load which removes costly spin wait in timer_start */
 int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
@@ -625,10 +609,8 @@ int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
 	timer->context.tcrr = load;
 	return 0;
 }
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_load_start);
-
-int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
-			     unsigned int match)
+static int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
+				   unsigned int match)
 {
 	u32 l;
 
@@ -650,10 +632,9 @@ int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
 	omap_dm_timer_disable(timer);
 	return 0;
 }
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_match);
 
-int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
-			   int toggle, int trigger)
+static int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
+				 int toggle, int trigger)
 {
 	u32 l;
 
@@ -676,19 +657,19 @@ int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
 	omap_dm_timer_disable(timer);
 	return 0;
 }
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_pwm);
 
-int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler)
+static int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer,
+					int prescaler)
 {
 	u32 l;
 
-	if (unlikely(!timer))
+	if (unlikely(!timer) || prescaler < -1 || prescaler > 7)
 		return -EINVAL;
 
 	omap_dm_timer_enable(timer);
 	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
 	l &= ~(OMAP_TIMER_CTRL_PRE | (0x07 << 2));
-	if (prescaler >= 0x00 && prescaler <= 0x07) {
+	if (prescaler >= 0) {
 		l |= OMAP_TIMER_CTRL_PRE;
 		l |= prescaler << 2;
 	}
@@ -699,10 +680,9 @@ int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler)
 	omap_dm_timer_disable(timer);
 	return 0;
 }
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_prescaler);
 
-int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
-				  unsigned int value)
+static int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
+					unsigned int value)
 {
 	if (unlikely(!timer))
 		return -EINVAL;
@@ -716,7 +696,6 @@ int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
 	omap_dm_timer_disable(timer);
 	return 0;
 }
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable);
 
 /**
  * omap_dm_timer_set_int_disable - disable timer interrupts
@@ -725,7 +704,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable);
  *
  * Disables the specified timer interrupts for a timer.
  */
-int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask)
+static int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask)
 {
 	u32 l = mask;
 
@@ -747,9 +726,8 @@ int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask)
 	omap_dm_timer_disable(timer);
 	return 0;
 }
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_disable);
 
-unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
+static unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
 {
 	unsigned int l;
 
@@ -762,9 +740,8 @@ unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
 
 	return l;
 }
-EXPORT_SYMBOL_GPL(omap_dm_timer_read_status);
 
-int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
+static int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
 {
 	if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev)))
 		return -EINVAL;
@@ -773,9 +750,8 @@ int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(omap_dm_timer_write_status);
 
-unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
+static unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
 {
 	if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
 		pr_err("%s: timer not iavailable or enabled.\n", __func__);
@@ -784,9 +760,8 @@ unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
 
 	return __omap_dm_timer_read_counter(timer, timer->posted);
 }
-EXPORT_SYMBOL_GPL(omap_dm_timer_read_counter);
 
-int omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
+static int omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
 {
 	if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
 		pr_err("%s: timer not available or enabled.\n", __func__);
@@ -799,7 +774,6 @@ int omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
 	timer->context.tcrr = value;
 	return 0;
 }
-EXPORT_SYMBOL_GPL(omap_dm_timer_write_counter);
 
 int omap_dm_timers_active(void)
 {
@@ -816,7 +790,6 @@ int omap_dm_timers_active(void)
 	}
 	return 0;
 }
-EXPORT_SYMBOL_GPL(omap_dm_timers_active);
 
 static const struct of_device_id omap_timer_match[];
 
@@ -833,14 +806,16 @@ static int omap_dm_timer_probe(struct platform_device *pdev)
 	struct omap_dm_timer *timer;
 	struct resource *mem, *irq;
 	struct device *dev = &pdev->dev;
-	const struct of_device_id *match;
 	const struct dmtimer_platform_data *pdata;
 	int ret;
 
-	match = of_match_device(of_match_ptr(omap_timer_match), dev);
-	pdata = match ? match->data : dev->platform_data;
+	pdata = of_device_get_match_data(dev);
+	if (!pdata)
+		pdata = dev_get_platdata(dev);
+	else
+		dev->platform_data = (void *)pdata;
 
-	if (!pdata && !dev->of_node) {
+	if (!pdata) {
 		dev_err(dev, "%s: no platform data.\n", __func__);
 		return -ENODEV;
 	}
@@ -946,8 +921,33 @@ static int omap_dm_timer_remove(struct platform_device *pdev)
 	return ret;
 }
 
+const static struct omap_dm_timer_ops dmtimer_ops = {
+	.request_by_node = omap_dm_timer_request_by_node,
+	.request_specific = omap_dm_timer_request_specific,
+	.request = omap_dm_timer_request,
+	.set_source = omap_dm_timer_set_source,
+	.get_irq = omap_dm_timer_get_irq,
+	.set_int_enable = omap_dm_timer_set_int_enable,
+	.set_int_disable = omap_dm_timer_set_int_disable,
+	.free = omap_dm_timer_free,
+	.enable = omap_dm_timer_enable,
+	.disable = omap_dm_timer_disable,
+	.get_fclk = omap_dm_timer_get_fclk,
+	.start = omap_dm_timer_start,
+	.stop = omap_dm_timer_stop,
+	.set_load = omap_dm_timer_set_load,
+	.set_match = omap_dm_timer_set_match,
+	.set_pwm = omap_dm_timer_set_pwm,
+	.set_prescaler = omap_dm_timer_set_prescaler,
+	.read_counter = omap_dm_timer_read_counter,
+	.write_counter = omap_dm_timer_write_counter,
+	.read_status = omap_dm_timer_read_status,
+	.write_status = omap_dm_timer_write_status,
+};
+
 static const struct dmtimer_platform_data omap3plus_pdata = {
 	.timer_errata = OMAP_TIMER_ERRATA_I103_I767,
+	.timer_ops = &dmtimer_ops,
 };
 
 static const struct of_device_id omap_timer_match[] = {
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 736ac887303c..605ec8cce67b 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -313,17 +313,6 @@ config MTD_NAND_ATMEL
 	  Enables support for NAND Flash / Smart Media Card interface
 	  on Atmel AT91 processors.
 
-config MTD_NAND_PXA3xx
-	tristate "NAND support on PXA3xx and Armada 370/XP"
-	depends on !MTD_NAND_MARVELL
-	depends on PXA3xx || ARCH_MMP || PLAT_ORION || ARCH_MVEBU
-	help
-
-	  This enables the driver for the NAND flash device found on
-	  PXA3xx processors (NFCv1) and also on 32-bit Armada
-	  platforms (XP, 370, 375, 38x, 39x) and 64-bit Armada
-	  platforms (7K, 8K) (NFCv2).
-
 config MTD_NAND_MARVELL
 	tristate "NAND controller support on Marvell boards"
 	depends on PXA3xx || ARCH_MMP || PLAT_ORION || ARCH_MVEBU || \
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 921634ba400c..c882d5ef192a 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -31,7 +31,6 @@ omap2_nand-objs := omap2.o
 obj-$(CONFIG_MTD_NAND_OMAP2) 		+= omap2_nand.o
 obj-$(CONFIG_MTD_NAND_OMAP_BCH_BUILD)	+= omap_elm.o
 obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
-obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
 obj-$(CONFIG_MTD_NAND_MARVELL)		+= marvell_nand.o
 obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
 obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
diff --git a/drivers/mtd/nand/marvell_nand.c b/drivers/mtd/nand/marvell_nand.c
index 2196f2a233d6..03805f9669da 100644
--- a/drivers/mtd/nand/marvell_nand.c
+++ b/drivers/mtd/nand/marvell_nand.c
@@ -2520,8 +2520,7 @@ static int marvell_nand_chip_init(struct device *dev, struct marvell_nfc *nfc,
 
 	if (pdata)
 		/* Legacy bindings support only one chip */
-		ret = mtd_device_register(mtd, pdata->parts[0],
-					  pdata->nr_parts[0]);
+		ret = mtd_device_register(mtd, pdata->parts, pdata->nr_parts);
 	else
 		ret = mtd_device_register(mtd, NULL, 0);
 	if (ret) {
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
deleted file mode 100644
index d1979c7dbe7e..000000000000
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ /dev/null
@@ -1,2105 +0,0 @@
-/*
- * drivers/mtd/nand/pxa3xx_nand.c
- *
- * Copyright © 2005 Intel Corporation
- * Copyright © 2006 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * See Documentation/mtd/nand/pxa3xx-nand.txt for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
-#include <linux/dma/pxa-dma.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/io.h>
-#include <linux/iopoll.h>
-#include <linux/irq.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
-#include <linux/mfd/syscon.h>
-#include <linux/regmap.h>
-
-#define	CHIP_DELAY_TIMEOUT	msecs_to_jiffies(200)
-#define NAND_STOP_DELAY		msecs_to_jiffies(40)
-#define PAGE_CHUNK_SIZE		(2048)
-
-/*
- * Define a buffer size for the initial command that detects the flash device:
- * STATUS, READID and PARAM.
- * ONFI param page is 256 bytes, and there are three redundant copies
- * to be read. JEDEC param page is 512 bytes, and there are also three
- * redundant copies to be read.
- * Hence this buffer should be at least 512 x 3. Let's pick 2048.
- */
-#define INIT_BUFFER_SIZE	2048
-
-/* System control register and bit to enable NAND on some SoCs */
-#define GENCONF_SOC_DEVICE_MUX	0x208
-#define GENCONF_SOC_DEVICE_MUX_NFC_EN BIT(0)
-
-/* registers and bit definitions */
-#define NDCR		(0x00) /* Control register */
-#define NDTR0CS0	(0x04) /* Timing Parameter 0 for CS0 */
-#define NDTR1CS0	(0x0C) /* Timing Parameter 1 for CS0 */
-#define NDSR		(0x14) /* Status Register */
-#define NDPCR		(0x18) /* Page Count Register */
-#define NDBDR0		(0x1C) /* Bad Block Register 0 */
-#define NDBDR1		(0x20) /* Bad Block Register 1 */
-#define NDECCCTRL	(0x28) /* ECC control */
-#define NDDB		(0x40) /* Data Buffer */
-#define NDCB0		(0x48) /* Command Buffer0 */
-#define NDCB1		(0x4C) /* Command Buffer1 */
-#define NDCB2		(0x50) /* Command Buffer2 */
-
-#define NDCR_SPARE_EN		(0x1 << 31)
-#define NDCR_ECC_EN		(0x1 << 30)
-#define NDCR_DMA_EN		(0x1 << 29)
-#define NDCR_ND_RUN		(0x1 << 28)
-#define NDCR_DWIDTH_C		(0x1 << 27)
-#define NDCR_DWIDTH_M		(0x1 << 26)
-#define NDCR_PAGE_SZ		(0x1 << 24)
-#define NDCR_NCSX		(0x1 << 23)
-#define NDCR_ND_MODE		(0x3 << 21)
-#define NDCR_NAND_MODE   	(0x0)
-#define NDCR_CLR_PG_CNT		(0x1 << 20)
-#define NFCV1_NDCR_ARB_CNTL	(0x1 << 19)
-#define NFCV2_NDCR_STOP_ON_UNCOR	(0x1 << 19)
-#define NDCR_RD_ID_CNT_MASK	(0x7 << 16)
-#define NDCR_RD_ID_CNT(x)	(((x) << 16) & NDCR_RD_ID_CNT_MASK)
-
-#define NDCR_RA_START		(0x1 << 15)
-#define NDCR_PG_PER_BLK		(0x1 << 14)
-#define NDCR_ND_ARB_EN		(0x1 << 12)
-#define NDCR_INT_MASK           (0xFFF)
-
-#define NDSR_MASK		(0xfff)
-#define NDSR_ERR_CNT_OFF	(16)
-#define NDSR_ERR_CNT_MASK       (0x1f)
-#define NDSR_ERR_CNT(sr)	((sr >> NDSR_ERR_CNT_OFF) & NDSR_ERR_CNT_MASK)
-#define NDSR_RDY                (0x1 << 12)
-#define NDSR_FLASH_RDY          (0x1 << 11)
-#define NDSR_CS0_PAGED		(0x1 << 10)
-#define NDSR_CS1_PAGED		(0x1 << 9)
-#define NDSR_CS0_CMDD		(0x1 << 8)
-#define NDSR_CS1_CMDD		(0x1 << 7)
-#define NDSR_CS0_BBD		(0x1 << 6)
-#define NDSR_CS1_BBD		(0x1 << 5)
-#define NDSR_UNCORERR		(0x1 << 4)
-#define NDSR_CORERR		(0x1 << 3)
-#define NDSR_WRDREQ		(0x1 << 2)
-#define NDSR_RDDREQ		(0x1 << 1)
-#define NDSR_WRCMDREQ		(0x1)
-
-#define NDCB0_LEN_OVRD		(0x1 << 28)
-#define NDCB0_ST_ROW_EN         (0x1 << 26)
-#define NDCB0_AUTO_RS		(0x1 << 25)
-#define NDCB0_CSEL		(0x1 << 24)
-#define NDCB0_EXT_CMD_TYPE_MASK	(0x7 << 29)
-#define NDCB0_EXT_CMD_TYPE(x)	(((x) << 29) & NDCB0_EXT_CMD_TYPE_MASK)
-#define NDCB0_CMD_TYPE_MASK	(0x7 << 21)
-#define NDCB0_CMD_TYPE(x)	(((x) << 21) & NDCB0_CMD_TYPE_MASK)
-#define NDCB0_NC		(0x1 << 20)
-#define NDCB0_DBC		(0x1 << 19)
-#define NDCB0_ADDR_CYC_MASK	(0x7 << 16)
-#define NDCB0_ADDR_CYC(x)	(((x) << 16) & NDCB0_ADDR_CYC_MASK)
-#define NDCB0_CMD2_MASK		(0xff << 8)
-#define NDCB0_CMD1_MASK		(0xff)
-#define NDCB0_ADDR_CYC_SHIFT	(16)
-
-#define EXT_CMD_TYPE_DISPATCH	6 /* Command dispatch */
-#define EXT_CMD_TYPE_NAKED_RW	5 /* Naked read or Naked write */
-#define EXT_CMD_TYPE_READ	4 /* Read */
-#define EXT_CMD_TYPE_DISP_WR	4 /* Command dispatch with write */
-#define EXT_CMD_TYPE_FINAL	3 /* Final command */
-#define EXT_CMD_TYPE_LAST_RW	1 /* Last naked read/write */
-#define EXT_CMD_TYPE_MONO	0 /* Monolithic read/write */
-
-/*
- * This should be large enough to read 'ONFI' and 'JEDEC'.
- * Let's use 7 bytes, which is the maximum ID count supported
- * by the controller (see NDCR_RD_ID_CNT_MASK).
- */
-#define READ_ID_BYTES		7
-
-/* macros for registers read/write */
-#define nand_writel(info, off, val)					\
-	do {								\
-		dev_vdbg(&info->pdev->dev,				\
-			 "%s():%d nand_writel(0x%x, 0x%04x)\n",		\
-			 __func__, __LINE__, (val), (off));		\
-		writel_relaxed((val), (info)->mmio_base + (off));	\
-	} while (0)
-
-#define nand_readl(info, off)						\
-	({								\
-		unsigned int _v;					\
-		_v = readl_relaxed((info)->mmio_base + (off));		\
-		dev_vdbg(&info->pdev->dev,				\
-			 "%s():%d nand_readl(0x%04x) = 0x%x\n",		\
-			 __func__, __LINE__, (off), _v);		\
-		_v;							\
-	})
-
-/* error code and state */
-enum {
-	ERR_NONE	= 0,
-	ERR_DMABUSERR	= -1,
-	ERR_SENDCMD	= -2,
-	ERR_UNCORERR	= -3,
-	ERR_BBERR	= -4,
-	ERR_CORERR	= -5,
-};
-
-enum {
-	STATE_IDLE = 0,
-	STATE_PREPARED,
-	STATE_CMD_HANDLE,
-	STATE_DMA_READING,
-	STATE_DMA_WRITING,
-	STATE_DMA_DONE,
-	STATE_PIO_READING,
-	STATE_PIO_WRITING,
-	STATE_CMD_DONE,
-	STATE_READY,
-};
-
-enum pxa3xx_nand_variant {
-	PXA3XX_NAND_VARIANT_PXA,
-	PXA3XX_NAND_VARIANT_ARMADA370,
-	PXA3XX_NAND_VARIANT_ARMADA_8K,
-};
-
-struct pxa3xx_nand_host {
-	struct nand_chip	chip;
-	void			*info_data;
-
-	/* page size of attached chip */
-	int			use_ecc;
-	int			cs;
-
-	/* calculated from pxa3xx_nand_flash data */
-	unsigned int		col_addr_cycles;
-	unsigned int		row_addr_cycles;
-};
-
-struct pxa3xx_nand_info {
-	struct nand_hw_control	controller;
-	struct platform_device	 *pdev;
-
-	struct clk		*clk;
-	void __iomem		*mmio_base;
-	unsigned long		mmio_phys;
-	struct completion	cmd_complete, dev_ready;
-
-	unsigned int 		buf_start;
-	unsigned int		buf_count;
-	unsigned int		buf_size;
-	unsigned int		data_buff_pos;
-	unsigned int		oob_buff_pos;
-
-	/* DMA information */
-	struct scatterlist	sg;
-	enum dma_data_direction	dma_dir;
-	struct dma_chan		*dma_chan;
-	dma_cookie_t		dma_cookie;
-	int			drcmr_dat;
-
-	unsigned char		*data_buff;
-	unsigned char		*oob_buff;
-	dma_addr_t 		data_buff_phys;
-	int 			data_dma_ch;
-
-	struct pxa3xx_nand_host *host[NUM_CHIP_SELECT];
-	unsigned int		state;
-
-	/*
-	 * This driver supports NFCv1 (as found in PXA SoC)
-	 * and NFCv2 (as found in Armada 370/XP SoC).
-	 */
-	enum pxa3xx_nand_variant variant;
-
-	int			cs;
-	int			use_ecc;	/* use HW ECC ? */
-	int			ecc_bch;	/* using BCH ECC? */
-	int			use_dma;	/* use DMA ? */
-	int			use_spare;	/* use spare ? */
-	int			need_wait;
-
-	/* Amount of real data per full chunk */
-	unsigned int		chunk_size;
-
-	/* Amount of spare data per full chunk */
-	unsigned int		spare_size;
-
-	/* Number of full chunks (i.e chunk_size + spare_size) */
-	unsigned int            nfullchunks;
-
-	/*
-	 * Total number of chunks. If equal to nfullchunks, then there
-	 * are only full chunks. Otherwise, there is one last chunk of
-	 * size (last_chunk_size + last_spare_size)
-	 */
-	unsigned int            ntotalchunks;
-
-	/* Amount of real data in the last chunk */
-	unsigned int		last_chunk_size;
-
-	/* Amount of spare data in the last chunk */
-	unsigned int		last_spare_size;
-
-	unsigned int		ecc_size;
-	unsigned int		ecc_err_cnt;
-	unsigned int		max_bitflips;
-	int 			retcode;
-
-	/*
-	 * Variables only valid during command
-	 * execution. step_chunk_size and step_spare_size is the
-	 * amount of real data and spare data in the current
-	 * chunk. cur_chunk is the current chunk being
-	 * read/programmed.
-	 */
-	unsigned int		step_chunk_size;
-	unsigned int		step_spare_size;
-	unsigned int            cur_chunk;
-
-	/* cached register value */
-	uint32_t		reg_ndcr;
-	uint32_t		ndtr0cs0;
-	uint32_t		ndtr1cs0;
-
-	/* generated NDCBx register values */
-	uint32_t		ndcb0;
-	uint32_t		ndcb1;
-	uint32_t		ndcb2;
-	uint32_t		ndcb3;
-};
-
-static bool use_dma = 1;
-module_param(use_dma, bool, 0444);
-MODULE_PARM_DESC(use_dma, "enable DMA for data transferring to/from NAND HW");
-
-struct pxa3xx_nand_timing {
-	unsigned int	tCH;  /* Enable signal hold time */
-	unsigned int	tCS;  /* Enable signal setup time */
-	unsigned int	tWH;  /* ND_nWE high duration */
-	unsigned int	tWP;  /* ND_nWE pulse time */
-	unsigned int	tRH;  /* ND_nRE high duration */
-	unsigned int	tRP;  /* ND_nRE pulse width */
-	unsigned int	tR;   /* ND_nWE high to ND_nRE low for read */
-	unsigned int	tWHR; /* ND_nWE high to ND_nRE low for status read */
-	unsigned int	tAR;  /* ND_ALE low to ND_nRE low delay */
-};
-
-struct pxa3xx_nand_flash {
-	uint32_t	chip_id;
-	unsigned int	flash_width;	/* Width of Flash memory (DWIDTH_M) */
-	unsigned int	dfc_width;	/* Width of flash controller(DWIDTH_C) */
-	struct pxa3xx_nand_timing *timing;	/* NAND Flash timing */
-};
-
-static struct pxa3xx_nand_timing timing[] = {
-	{ 40, 80, 60, 100, 80, 100, 90000, 400, 40, },
-	{ 10,  0, 20,  40, 30,  40, 11123, 110, 10, },
-	{ 10, 25, 15,  25, 15,  30, 25000,  60, 10, },
-	{ 10, 35, 15,  25, 15,  25, 25000,  60, 10, },
-};
-
-static struct pxa3xx_nand_flash builtin_flash_types[] = {
-	{ 0x46ec, 16, 16, &timing[1] },
-	{ 0xdaec,  8,  8, &timing[1] },
-	{ 0xd7ec,  8,  8, &timing[1] },
-	{ 0xa12c,  8,  8, &timing[2] },
-	{ 0xb12c, 16, 16, &timing[2] },
-	{ 0xdc2c,  8,  8, &timing[2] },
-	{ 0xcc2c, 16, 16, &timing[2] },
-	{ 0xba20, 16, 16, &timing[3] },
-};
-
-static int pxa3xx_ooblayout_ecc(struct mtd_info *mtd, int section,
-				struct mtd_oob_region *oobregion)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
-	struct pxa3xx_nand_info *info = host->info_data;
-	int nchunks = mtd->writesize / info->chunk_size;
-
-	if (section >= nchunks)
-		return -ERANGE;
-
-	oobregion->offset = ((info->ecc_size + info->spare_size) * section) +
-			    info->spare_size;
-	oobregion->length = info->ecc_size;
-
-	return 0;
-}
-
-static int pxa3xx_ooblayout_free(struct mtd_info *mtd, int section,
-				 struct mtd_oob_region *oobregion)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
-	struct pxa3xx_nand_info *info = host->info_data;
-	int nchunks = mtd->writesize / info->chunk_size;
-
-	if (section >= nchunks)
-		return -ERANGE;
-
-	if (!info->spare_size)
-		return 0;
-
-	oobregion->offset = section * (info->ecc_size + info->spare_size);
-	oobregion->length = info->spare_size;
-	if (!section) {
-		/*
-		 * Bootrom looks in bytes 0 & 5 for bad blocks for the
-		 * 4KB page / 4bit BCH combination.
-		 */
-		if (mtd->writesize == 4096 && info->chunk_size == 2048) {
-			oobregion->offset += 6;
-			oobregion->length -= 6;
-		} else {
-			oobregion->offset += 2;
-			oobregion->length -= 2;
-		}
-	}
-
-	return 0;
-}
-
-static const struct mtd_ooblayout_ops pxa3xx_ooblayout_ops = {
-	.ecc = pxa3xx_ooblayout_ecc,
-	.free = pxa3xx_ooblayout_free,
-};
-
-static u8 bbt_pattern[] = {'M', 'V', 'B', 'b', 't', '0' };
-static u8 bbt_mirror_pattern[] = {'1', 't', 'b', 'B', 'V', 'M' };
-
-static struct nand_bbt_descr bbt_main_descr = {
-	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
-		| NAND_BBT_2BIT | NAND_BBT_VERSION,
-	.offs =	8,
-	.len = 6,
-	.veroffs = 14,
-	.maxblocks = 8,		/* Last 8 blocks in each chip */
-	.pattern = bbt_pattern
-};
-
-static struct nand_bbt_descr bbt_mirror_descr = {
-	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
-		| NAND_BBT_2BIT | NAND_BBT_VERSION,
-	.offs =	8,
-	.len = 6,
-	.veroffs = 14,
-	.maxblocks = 8,		/* Last 8 blocks in each chip */
-	.pattern = bbt_mirror_pattern
-};
-
-#define NDTR0_tCH(c)	(min((c), 7) << 19)
-#define NDTR0_tCS(c)	(min((c), 7) << 16)
-#define NDTR0_tWH(c)	(min((c), 7) << 11)
-#define NDTR0_tWP(c)	(min((c), 7) << 8)
-#define NDTR0_tRH(c)	(min((c), 7) << 3)
-#define NDTR0_tRP(c)	(min((c), 7) << 0)
-
-#define NDTR1_tR(c)	(min((c), 65535) << 16)
-#define NDTR1_tWHR(c)	(min((c), 15) << 4)
-#define NDTR1_tAR(c)	(min((c), 15) << 0)
-
-/* convert nano-seconds to nand flash controller clock cycles */
-#define ns2cycle(ns, clk)	(int)((ns) * (clk / 1000000) / 1000)
-
-static const struct of_device_id pxa3xx_nand_dt_ids[] = {
-	{
-		.compatible = "marvell,pxa3xx-nand",
-		.data       = (void *)PXA3XX_NAND_VARIANT_PXA,
-	},
-	{
-		.compatible = "marvell,armada370-nand",
-		.data       = (void *)PXA3XX_NAND_VARIANT_ARMADA370,
-	},
-	{
-		.compatible = "marvell,armada-8k-nand",
-		.data       = (void *)PXA3XX_NAND_VARIANT_ARMADA_8K,
-	},
-	{}
-};
-MODULE_DEVICE_TABLE(of, pxa3xx_nand_dt_ids);
-
-static enum pxa3xx_nand_variant
-pxa3xx_nand_get_variant(struct platform_device *pdev)
-{
-	const struct of_device_id *of_id =
-			of_match_device(pxa3xx_nand_dt_ids, &pdev->dev);
-	if (!of_id)
-		return PXA3XX_NAND_VARIANT_PXA;
-	return (enum pxa3xx_nand_variant)of_id->data;
-}
-
-static void pxa3xx_nand_set_timing(struct pxa3xx_nand_host *host,
-				   const struct pxa3xx_nand_timing *t)
-{
-	struct pxa3xx_nand_info *info = host->info_data;
-	unsigned long nand_clk = clk_get_rate(info->clk);
-	uint32_t ndtr0, ndtr1;
-
-	ndtr0 = NDTR0_tCH(ns2cycle(t->tCH, nand_clk)) |
-		NDTR0_tCS(ns2cycle(t->tCS, nand_clk)) |
-		NDTR0_tWH(ns2cycle(t->tWH, nand_clk)) |
-		NDTR0_tWP(ns2cycle(t->tWP, nand_clk)) |
-		NDTR0_tRH(ns2cycle(t->tRH, nand_clk)) |
-		NDTR0_tRP(ns2cycle(t->tRP, nand_clk));
-
-	ndtr1 = NDTR1_tR(ns2cycle(t->tR, nand_clk)) |
-		NDTR1_tWHR(ns2cycle(t->tWHR, nand_clk)) |
-		NDTR1_tAR(ns2cycle(t->tAR, nand_clk));
-
-	info->ndtr0cs0 = ndtr0;
-	info->ndtr1cs0 = ndtr1;
-	nand_writel(info, NDTR0CS0, ndtr0);
-	nand_writel(info, NDTR1CS0, ndtr1);
-}
-
-static void pxa3xx_nand_set_sdr_timing(struct pxa3xx_nand_host *host,
-				       const struct nand_sdr_timings *t)
-{
-	struct pxa3xx_nand_info *info = host->info_data;
-	struct nand_chip *chip = &host->chip;
-	unsigned long nand_clk = clk_get_rate(info->clk);
-	uint32_t ndtr0, ndtr1;
-
-	u32 tCH_min = DIV_ROUND_UP(t->tCH_min, 1000);
-	u32 tCS_min = DIV_ROUND_UP(t->tCS_min, 1000);
-	u32 tWH_min = DIV_ROUND_UP(t->tWH_min, 1000);
-	u32 tWP_min = DIV_ROUND_UP(t->tWC_min - t->tWH_min, 1000);
-	u32 tREH_min = DIV_ROUND_UP(t->tREH_min, 1000);
-	u32 tRP_min = DIV_ROUND_UP(t->tRC_min - t->tREH_min, 1000);
-	u32 tR = chip->chip_delay * 1000;
-	u32 tWHR_min = DIV_ROUND_UP(t->tWHR_min, 1000);
-	u32 tAR_min = DIV_ROUND_UP(t->tAR_min, 1000);
-
-	/* fallback to a default value if tR = 0 */
-	if (!tR)
-		tR = 20000;
-
-	ndtr0 = NDTR0_tCH(ns2cycle(tCH_min, nand_clk)) |
-		NDTR0_tCS(ns2cycle(tCS_min, nand_clk)) |
-		NDTR0_tWH(ns2cycle(tWH_min, nand_clk)) |
-		NDTR0_tWP(ns2cycle(tWP_min, nand_clk)) |
-		NDTR0_tRH(ns2cycle(tREH_min, nand_clk)) |
-		NDTR0_tRP(ns2cycle(tRP_min, nand_clk));
-
-	ndtr1 = NDTR1_tR(ns2cycle(tR, nand_clk)) |
-		NDTR1_tWHR(ns2cycle(tWHR_min, nand_clk)) |
-		NDTR1_tAR(ns2cycle(tAR_min, nand_clk));
-
-	info->ndtr0cs0 = ndtr0;
-	info->ndtr1cs0 = ndtr1;
-	nand_writel(info, NDTR0CS0, ndtr0);
-	nand_writel(info, NDTR1CS0, ndtr1);
-}
-
-static int pxa3xx_nand_init_timings_compat(struct pxa3xx_nand_host *host,
-					   unsigned int *flash_width,
-					   unsigned int *dfc_width)
-{
-	struct nand_chip *chip = &host->chip;
-	struct pxa3xx_nand_info *info = host->info_data;
-	const struct pxa3xx_nand_flash *f = NULL;
-	int i, id, ntypes;
-	u8 idbuf[2];
-
-	ntypes = ARRAY_SIZE(builtin_flash_types);
-
-	nand_readid_op(chip, 0, idbuf, sizeof(idbuf));
-	id = idbuf[0] | (idbuf[1] << 8);
-
-	for (i = 0; i < ntypes; i++) {
-		f = &builtin_flash_types[i];
-
-		if (f->chip_id == id)
-			break;
-	}
-
-	if (i == ntypes) {
-		dev_err(&info->pdev->dev, "Error: timings not found\n");
-		return -EINVAL;
-	}
-
-	pxa3xx_nand_set_timing(host, f->timing);
-
-	*flash_width = f->flash_width;
-	*dfc_width = f->dfc_width;
-
-	return 0;
-}
-
-static int pxa3xx_nand_init_timings_onfi(struct pxa3xx_nand_host *host,
-					 int mode)
-{
-	const struct nand_sdr_timings *timings;
-
-	mode = fls(mode) - 1;
-	if (mode < 0)
-		mode = 0;
-
-	timings = onfi_async_timing_mode_to_sdr_timings(mode);
-	if (IS_ERR(timings))
-		return PTR_ERR(timings);
-
-	pxa3xx_nand_set_sdr_timing(host, timings);
-
-	return 0;
-}
-
-static int pxa3xx_nand_init(struct pxa3xx_nand_host *host)
-{
-	struct nand_chip *chip = &host->chip;
-	struct pxa3xx_nand_info *info = host->info_data;
-	unsigned int flash_width = 0, dfc_width = 0;
-	int mode, err;
-
-	mode = onfi_get_async_timing_mode(chip);
-	if (mode == ONFI_TIMING_MODE_UNKNOWN) {
-		err = pxa3xx_nand_init_timings_compat(host, &flash_width,
-						      &dfc_width);
-		if (err)
-			return err;
-
-		if (flash_width == 16) {
-			info->reg_ndcr |= NDCR_DWIDTH_M;
-			chip->options |= NAND_BUSWIDTH_16;
-		}
-
-		info->reg_ndcr |= (dfc_width == 16) ? NDCR_DWIDTH_C : 0;
-	} else {
-		err = pxa3xx_nand_init_timings_onfi(host, mode);
-		if (err)
-			return err;
-	}
-
-	return 0;
-}
-
-/**
- * NOTE: it is a must to set ND_RUN firstly, then write
- * command buffer, otherwise, it does not work.
- * We enable all the interrupt at the same time, and
- * let pxa3xx_nand_irq to handle all logic.
- */
-static void pxa3xx_nand_start(struct pxa3xx_nand_info *info)
-{
-	uint32_t ndcr;
-
-	ndcr = info->reg_ndcr;
-
-	if (info->use_ecc) {
-		ndcr |= NDCR_ECC_EN;
-		if (info->ecc_bch)
-			nand_writel(info, NDECCCTRL, 0x1);
-	} else {
-		ndcr &= ~NDCR_ECC_EN;
-		if (info->ecc_bch)
-			nand_writel(info, NDECCCTRL, 0x0);
-	}
-
-	if (info->use_dma)
-		ndcr |= NDCR_DMA_EN;
-	else
-		ndcr &= ~NDCR_DMA_EN;
-
-	if (info->use_spare)
-		ndcr |= NDCR_SPARE_EN;
-	else
-		ndcr &= ~NDCR_SPARE_EN;
-
-	ndcr |= NDCR_ND_RUN;
-
-	/* clear status bits and run */
-	nand_writel(info, NDSR, NDSR_MASK);
-	nand_writel(info, NDCR, 0);
-	nand_writel(info, NDCR, ndcr);
-}
-
-static void pxa3xx_nand_stop(struct pxa3xx_nand_info *info)
-{
-	uint32_t ndcr;
-	int timeout = NAND_STOP_DELAY;
-
-	/* wait RUN bit in NDCR become 0 */
-	ndcr = nand_readl(info, NDCR);
-	while ((ndcr & NDCR_ND_RUN) && (timeout-- > 0)) {
-		ndcr = nand_readl(info, NDCR);
-		udelay(1);
-	}
-
-	if (timeout <= 0) {
-		ndcr &= ~NDCR_ND_RUN;
-		nand_writel(info, NDCR, ndcr);
-	}
-	if (info->dma_chan)
-		dmaengine_terminate_all(info->dma_chan);
-
-	/* clear status bits */
-	nand_writel(info, NDSR, NDSR_MASK);
-}
-
-static void __maybe_unused
-enable_int(struct pxa3xx_nand_info *info, uint32_t int_mask)
-{
-	uint32_t ndcr;
-
-	ndcr = nand_readl(info, NDCR);
-	nand_writel(info, NDCR, ndcr & ~int_mask);
-}
-
-static void disable_int(struct pxa3xx_nand_info *info, uint32_t int_mask)
-{
-	uint32_t ndcr;
-
-	ndcr = nand_readl(info, NDCR);
-	nand_writel(info, NDCR, ndcr | int_mask);
-}
-
-static void drain_fifo(struct pxa3xx_nand_info *info, void *data, int len)
-{
-	if (info->ecc_bch) {
-		u32 val;
-		int ret;
-
-		/*
-		 * According to the datasheet, when reading from NDDB
-		 * with BCH enabled, after each 32 bytes reads, we
-		 * have to make sure that the NDSR.RDDREQ bit is set.
-		 *
-		 * Drain the FIFO 8 32 bits reads at a time, and skip
-		 * the polling on the last read.
-		 */
-		while (len > 8) {
-			ioread32_rep(info->mmio_base + NDDB, data, 8);
-
-			ret = readl_relaxed_poll_timeout(info->mmio_base + NDSR, val,
-							 val & NDSR_RDDREQ, 1000, 5000);
-			if (ret) {
-				dev_err(&info->pdev->dev,
-					"Timeout on RDDREQ while draining the FIFO\n");
-				return;
-			}
-
-			data += 32;
-			len -= 8;
-		}
-	}
-
-	ioread32_rep(info->mmio_base + NDDB, data, len);
-}
-
-static void handle_data_pio(struct pxa3xx_nand_info *info)
-{
-	switch (info->state) {
-	case STATE_PIO_WRITING:
-		if (info->step_chunk_size)
-			writesl(info->mmio_base + NDDB,
-				info->data_buff + info->data_buff_pos,
-				DIV_ROUND_UP(info->step_chunk_size, 4));
-
-		if (info->step_spare_size)
-			writesl(info->mmio_base + NDDB,
-				info->oob_buff + info->oob_buff_pos,
-				DIV_ROUND_UP(info->step_spare_size, 4));
-		break;
-	case STATE_PIO_READING:
-		if (info->step_chunk_size)
-			drain_fifo(info,
-				   info->data_buff + info->data_buff_pos,
-				   DIV_ROUND_UP(info->step_chunk_size, 4));
-
-		if (info->step_spare_size)
-			drain_fifo(info,
-				   info->oob_buff + info->oob_buff_pos,
-				   DIV_ROUND_UP(info->step_spare_size, 4));
-		break;
-	default:
-		dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
-				info->state);
-		BUG();
-	}
-
-	/* Update buffer pointers for multi-page read/write */
-	info->data_buff_pos += info->step_chunk_size;
-	info->oob_buff_pos += info->step_spare_size;
-}
-
-static void pxa3xx_nand_data_dma_irq(void *data)
-{
-	struct pxa3xx_nand_info *info = data;
-	struct dma_tx_state state;
-	enum dma_status status;
-
-	status = dmaengine_tx_status(info->dma_chan, info->dma_cookie, &state);
-	if (likely(status == DMA_COMPLETE)) {
-		info->state = STATE_DMA_DONE;
-	} else {
-		dev_err(&info->pdev->dev, "DMA error on data channel\n");
-		info->retcode = ERR_DMABUSERR;
-	}
-	dma_unmap_sg(info->dma_chan->device->dev, &info->sg, 1, info->dma_dir);
-
-	nand_writel(info, NDSR, NDSR_WRDREQ | NDSR_RDDREQ);
-	enable_int(info, NDCR_INT_MASK);
-}
-
-static void start_data_dma(struct pxa3xx_nand_info *info)
-{
-	enum dma_transfer_direction direction;
-	struct dma_async_tx_descriptor *tx;
-
-	switch (info->state) {
-	case STATE_DMA_WRITING:
-		info->dma_dir = DMA_TO_DEVICE;
-		direction = DMA_MEM_TO_DEV;
-		break;
-	case STATE_DMA_READING:
-		info->dma_dir = DMA_FROM_DEVICE;
-		direction = DMA_DEV_TO_MEM;
-		break;
-	default:
-		dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
-				info->state);
-		BUG();
-	}
-	info->sg.length = info->chunk_size;
-	if (info->use_spare)
-		info->sg.length += info->spare_size + info->ecc_size;
-	dma_map_sg(info->dma_chan->device->dev, &info->sg, 1, info->dma_dir);
-
-	tx = dmaengine_prep_slave_sg(info->dma_chan, &info->sg, 1, direction,
-				     DMA_PREP_INTERRUPT);
-	if (!tx) {
-		dev_err(&info->pdev->dev, "prep_slave_sg() failed\n");
-		return;
-	}
-	tx->callback = pxa3xx_nand_data_dma_irq;
-	tx->callback_param = info;
-	info->dma_cookie = dmaengine_submit(tx);
-	dma_async_issue_pending(info->dma_chan);
-	dev_dbg(&info->pdev->dev, "%s(dir=%d cookie=%x size=%u)\n",
-		__func__, direction, info->dma_cookie, info->sg.length);
-}
-
-static irqreturn_t pxa3xx_nand_irq_thread(int irq, void *data)
-{
-	struct pxa3xx_nand_info *info = data;
-
-	handle_data_pio(info);
-
-	info->state = STATE_CMD_DONE;
-	nand_writel(info, NDSR, NDSR_WRDREQ | NDSR_RDDREQ);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
-{
-	struct pxa3xx_nand_info *info = devid;
-	unsigned int status, is_completed = 0, is_ready = 0;
-	unsigned int ready, cmd_done;
-	irqreturn_t ret = IRQ_HANDLED;
-
-	if (info->cs == 0) {
-		ready           = NDSR_FLASH_RDY;
-		cmd_done        = NDSR_CS0_CMDD;
-	} else {
-		ready           = NDSR_RDY;
-		cmd_done        = NDSR_CS1_CMDD;
-	}
-
-	status = nand_readl(info, NDSR);
-
-	if (status & NDSR_UNCORERR)
-		info->retcode = ERR_UNCORERR;
-	if (status & NDSR_CORERR) {
-		info->retcode = ERR_CORERR;
-		if ((info->variant == PXA3XX_NAND_VARIANT_ARMADA370 ||
-		     info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K) &&
-		    info->ecc_bch)
-			info->ecc_err_cnt = NDSR_ERR_CNT(status);
-		else
-			info->ecc_err_cnt = 1;
-
-		/*
-		 * Each chunk composing a page is corrected independently,
-		 * and we need to store maximum number of corrected bitflips
-		 * to return it to the MTD layer in ecc.read_page().
-		 */
-		info->max_bitflips = max_t(unsigned int,
-					   info->max_bitflips,
-					   info->ecc_err_cnt);
-	}
-	if (status & (NDSR_RDDREQ | NDSR_WRDREQ)) {
-		/* whether use dma to transfer data */
-		if (info->use_dma) {
-			disable_int(info, NDCR_INT_MASK);
-			info->state = (status & NDSR_RDDREQ) ?
-				      STATE_DMA_READING : STATE_DMA_WRITING;
-			start_data_dma(info);
-			goto NORMAL_IRQ_EXIT;
-		} else {
-			info->state = (status & NDSR_RDDREQ) ?
-				      STATE_PIO_READING : STATE_PIO_WRITING;
-			ret = IRQ_WAKE_THREAD;
-			goto NORMAL_IRQ_EXIT;
-		}
-	}
-	if (status & cmd_done) {
-		info->state = STATE_CMD_DONE;
-		is_completed = 1;
-	}
-	if (status & ready) {
-		info->state = STATE_READY;
-		is_ready = 1;
-	}
-
-	/*
-	 * Clear all status bit before issuing the next command, which
-	 * can and will alter the status bits and will deserve a new
-	 * interrupt on its own. This lets the controller exit the IRQ
-	 */
-	nand_writel(info, NDSR, status);
-
-	if (status & NDSR_WRCMDREQ) {
-		status &= ~NDSR_WRCMDREQ;
-		info->state = STATE_CMD_HANDLE;
-
-		/*
-		 * Command buffer registers NDCB{0-2} (and optionally NDCB3)
-		 * must be loaded by writing directly either 12 or 16
-		 * bytes directly to NDCB0, four bytes at a time.
-		 *
-		 * Direct write access to NDCB1, NDCB2 and NDCB3 is ignored
-		 * but each NDCBx register can be read.
-		 */
-		nand_writel(info, NDCB0, info->ndcb0);
-		nand_writel(info, NDCB0, info->ndcb1);
-		nand_writel(info, NDCB0, info->ndcb2);
-
-		/* NDCB3 register is available in NFCv2 (Armada 370/XP SoC) */
-		if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 ||
-		    info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K)
-			nand_writel(info, NDCB0, info->ndcb3);
-	}
-
-	if (is_completed)
-		complete(&info->cmd_complete);
-	if (is_ready)
-		complete(&info->dev_ready);
-NORMAL_IRQ_EXIT:
-	return ret;
-}
-
-static inline int is_buf_blank(uint8_t *buf, size_t len)
-{
-	for (; len > 0; len--)
-		if (*buf++ != 0xff)
-			return 0;
-	return 1;
-}
-
-static void set_command_address(struct pxa3xx_nand_info *info,
-		unsigned int page_size, uint16_t column, int page_addr)
-{
-	/* small page addr setting */
-	if (page_size < PAGE_CHUNK_SIZE) {
-		info->ndcb1 = ((page_addr & 0xFFFFFF) << 8)
-				| (column & 0xFF);
-
-		info->ndcb2 = 0;
-	} else {
-		info->ndcb1 = ((page_addr & 0xFFFF) << 16)
-				| (column & 0xFFFF);
-
-		if (page_addr & 0xFF0000)
-			info->ndcb2 = (page_addr & 0xFF0000) >> 16;
-		else
-			info->ndcb2 = 0;
-	}
-}
-
-static void prepare_start_command(struct pxa3xx_nand_info *info, int command)
-{
-	struct pxa3xx_nand_host *host = info->host[info->cs];
-	struct mtd_info *mtd = nand_to_mtd(&host->chip);
-
-	/* reset data and oob column point to handle data */
-	info->buf_start		= 0;
-	info->buf_count		= 0;
-	info->data_buff_pos	= 0;
-	info->oob_buff_pos	= 0;
-	info->step_chunk_size   = 0;
-	info->step_spare_size   = 0;
-	info->cur_chunk         = 0;
-	info->use_ecc		= 0;
-	info->use_spare		= 1;
-	info->retcode		= ERR_NONE;
-	info->ecc_err_cnt	= 0;
-	info->ndcb3		= 0;
-	info->need_wait		= 0;
-
-	switch (command) {
-	case NAND_CMD_READ0:
-	case NAND_CMD_READOOB:
-	case NAND_CMD_PAGEPROG:
-		info->use_ecc = 1;
-		break;
-	case NAND_CMD_PARAM:
-		info->use_spare = 0;
-		break;
-	default:
-		info->ndcb1 = 0;
-		info->ndcb2 = 0;
-		break;
-	}
-
-	/*
-	 * If we are about to issue a read command, or about to set
-	 * the write address, then clean the data buffer.
-	 */
-	if (command == NAND_CMD_READ0 ||
-	    command == NAND_CMD_READOOB ||
-	    command == NAND_CMD_SEQIN) {
-
-		info->buf_count = mtd->writesize + mtd->oobsize;
-		memset(info->data_buff, 0xFF, info->buf_count);
-	}
-
-}
-
-static int prepare_set_command(struct pxa3xx_nand_info *info, int command,
-		int ext_cmd_type, uint16_t column, int page_addr)
-{
-	int addr_cycle, exec_cmd;
-	struct pxa3xx_nand_host *host;
-	struct mtd_info *mtd;
-
-	host = info->host[info->cs];
-	mtd = nand_to_mtd(&host->chip);
-	addr_cycle = 0;
-	exec_cmd = 1;
-
-	if (info->cs != 0)
-		info->ndcb0 = NDCB0_CSEL;
-	else
-		info->ndcb0 = 0;
-
-	if (command == NAND_CMD_SEQIN)
-		exec_cmd = 0;
-
-	addr_cycle = NDCB0_ADDR_CYC(host->row_addr_cycles
-				    + host->col_addr_cycles);
-
-	switch (command) {
-	case NAND_CMD_READOOB:
-	case NAND_CMD_READ0:
-		info->buf_start = column;
-		info->ndcb0 |= NDCB0_CMD_TYPE(0)
-				| addr_cycle
-				| NAND_CMD_READ0;
-
-		if (command == NAND_CMD_READOOB)
-			info->buf_start += mtd->writesize;
-
-		if (info->cur_chunk < info->nfullchunks) {
-			info->step_chunk_size = info->chunk_size;
-			info->step_spare_size = info->spare_size;
-		} else {
-			info->step_chunk_size = info->last_chunk_size;
-			info->step_spare_size = info->last_spare_size;
-		}
-
-		/*
-		 * Multiple page read needs an 'extended command type' field,
-		 * which is either naked-read or last-read according to the
-		 * state.
-		 */
-		if (mtd->writesize == PAGE_CHUNK_SIZE) {
-			info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8);
-		} else if (mtd->writesize > PAGE_CHUNK_SIZE) {
-			info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8)
-					| NDCB0_LEN_OVRD
-					| NDCB0_EXT_CMD_TYPE(ext_cmd_type);
-			info->ndcb3 = info->step_chunk_size +
-				info->step_spare_size;
-		}
-
-		set_command_address(info, mtd->writesize, column, page_addr);
-		break;
-
-	case NAND_CMD_SEQIN:
-
-		info->buf_start = column;
-		set_command_address(info, mtd->writesize, 0, page_addr);
-
-		/*
-		 * Multiple page programming needs to execute the initial
-		 * SEQIN command that sets the page address.
-		 */
-		if (mtd->writesize > PAGE_CHUNK_SIZE) {
-			info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
-				| NDCB0_EXT_CMD_TYPE(ext_cmd_type)
-				| addr_cycle
-				| command;
-			exec_cmd = 1;
-		}
-		break;
-
-	case NAND_CMD_PAGEPROG:
-		if (is_buf_blank(info->data_buff,
-					(mtd->writesize + mtd->oobsize))) {
-			exec_cmd = 0;
-			break;
-		}
-
-		if (info->cur_chunk < info->nfullchunks) {
-			info->step_chunk_size = info->chunk_size;
-			info->step_spare_size = info->spare_size;
-		} else {
-			info->step_chunk_size = info->last_chunk_size;
-			info->step_spare_size = info->last_spare_size;
-		}
-
-		/* Second command setting for large pages */
-		if (mtd->writesize > PAGE_CHUNK_SIZE) {
-			/*
-			 * Multiple page write uses the 'extended command'
-			 * field. This can be used to issue a command dispatch
-			 * or a naked-write depending on the current stage.
-			 */
-			info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
-					| NDCB0_LEN_OVRD
-					| NDCB0_EXT_CMD_TYPE(ext_cmd_type);
-			info->ndcb3 = info->step_chunk_size +
-				      info->step_spare_size;
-
-			/*
-			 * This is the command dispatch that completes a chunked
-			 * page program operation.
-			 */
-			if (info->cur_chunk == info->ntotalchunks) {
-				info->ndcb0 = NDCB0_CMD_TYPE(0x1)
-					| NDCB0_EXT_CMD_TYPE(ext_cmd_type)
-					| command;
-				info->ndcb1 = 0;
-				info->ndcb2 = 0;
-				info->ndcb3 = 0;
-			}
-		} else {
-			info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
-					| NDCB0_AUTO_RS
-					| NDCB0_ST_ROW_EN
-					| NDCB0_DBC
-					| (NAND_CMD_PAGEPROG << 8)
-					| NAND_CMD_SEQIN
-					| addr_cycle;
-		}
-		break;
-
-	case NAND_CMD_PARAM:
-		info->buf_count = INIT_BUFFER_SIZE;
-		info->ndcb0 |= NDCB0_CMD_TYPE(0)
-				| NDCB0_ADDR_CYC(1)
-				| NDCB0_LEN_OVRD
-				| command;
-		info->ndcb1 = (column & 0xFF);
-		info->ndcb3 = INIT_BUFFER_SIZE;
-		info->step_chunk_size = INIT_BUFFER_SIZE;
-		break;
-
-	case NAND_CMD_READID:
-		info->buf_count = READ_ID_BYTES;
-		info->ndcb0 |= NDCB0_CMD_TYPE(3)
-				| NDCB0_ADDR_CYC(1)
-				| command;
-		info->ndcb1 = (column & 0xFF);
-
-		info->step_chunk_size = 8;
-		break;
-	case NAND_CMD_STATUS:
-		info->buf_count = 1;
-		info->ndcb0 |= NDCB0_CMD_TYPE(4)
-				| NDCB0_ADDR_CYC(1)
-				| command;
-
-		info->step_chunk_size = 8;
-		break;
-
-	case NAND_CMD_ERASE1:
-		info->ndcb0 |= NDCB0_CMD_TYPE(2)
-				| NDCB0_AUTO_RS
-				| NDCB0_ADDR_CYC(3)
-				| NDCB0_DBC
-				| (NAND_CMD_ERASE2 << 8)
-				| NAND_CMD_ERASE1;
-		info->ndcb1 = page_addr;
-		info->ndcb2 = 0;
-
-		break;
-	case NAND_CMD_RESET:
-		info->ndcb0 |= NDCB0_CMD_TYPE(5)
-				| command;
-
-		break;
-
-	case NAND_CMD_ERASE2:
-		exec_cmd = 0;
-		break;
-
-	default:
-		exec_cmd = 0;
-		dev_err(&info->pdev->dev, "non-supported command %x\n",
-				command);
-		break;
-	}
-
-	return exec_cmd;
-}
-
-static void nand_cmdfunc(struct mtd_info *mtd, unsigned command,
-			 int column, int page_addr)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
-	struct pxa3xx_nand_info *info = host->info_data;
-	int exec_cmd;
-
-	/*
-	 * if this is a x16 device ,then convert the input
-	 * "byte" address into a "word" address appropriate
-	 * for indexing a word-oriented device
-	 */
-	if (info->reg_ndcr & NDCR_DWIDTH_M)
-		column /= 2;
-
-	/*
-	 * There may be different NAND chip hooked to
-	 * different chip select, so check whether
-	 * chip select has been changed, if yes, reset the timing
-	 */
-	if (info->cs != host->cs) {
-		info->cs = host->cs;
-		nand_writel(info, NDTR0CS0, info->ndtr0cs0);
-		nand_writel(info, NDTR1CS0, info->ndtr1cs0);
-	}
-
-	prepare_start_command(info, command);
-
-	info->state = STATE_PREPARED;
-	exec_cmd = prepare_set_command(info, command, 0, column, page_addr);
-
-	if (exec_cmd) {
-		init_completion(&info->cmd_complete);
-		init_completion(&info->dev_ready);
-		info->need_wait = 1;
-		pxa3xx_nand_start(info);
-
-		if (!wait_for_completion_timeout(&info->cmd_complete,
-		    CHIP_DELAY_TIMEOUT)) {
-			dev_err(&info->pdev->dev, "Wait time out!!!\n");
-			/* Stop State Machine for next command cycle */
-			pxa3xx_nand_stop(info);
-		}
-	}
-	info->state = STATE_IDLE;
-}
-
-static void nand_cmdfunc_extended(struct mtd_info *mtd,
-				  const unsigned command,
-				  int column, int page_addr)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
-	struct pxa3xx_nand_info *info = host->info_data;
-	int exec_cmd, ext_cmd_type;
-
-	/*
-	 * if this is a x16 device then convert the input
-	 * "byte" address into a "word" address appropriate
-	 * for indexing a word-oriented device
-	 */
-	if (info->reg_ndcr & NDCR_DWIDTH_M)
-		column /= 2;
-
-	/*
-	 * There may be different NAND chip hooked to
-	 * different chip select, so check whether
-	 * chip select has been changed, if yes, reset the timing
-	 */
-	if (info->cs != host->cs) {
-		info->cs = host->cs;
-		nand_writel(info, NDTR0CS0, info->ndtr0cs0);
-		nand_writel(info, NDTR1CS0, info->ndtr1cs0);
-	}
-
-	/* Select the extended command for the first command */
-	switch (command) {
-	case NAND_CMD_READ0:
-	case NAND_CMD_READOOB:
-		ext_cmd_type = EXT_CMD_TYPE_MONO;
-		break;
-	case NAND_CMD_SEQIN:
-		ext_cmd_type = EXT_CMD_TYPE_DISPATCH;
-		break;
-	case NAND_CMD_PAGEPROG:
-		ext_cmd_type = EXT_CMD_TYPE_NAKED_RW;
-		break;
-	default:
-		ext_cmd_type = 0;
-		break;
-	}
-
-	prepare_start_command(info, command);
-
-	/*
-	 * Prepare the "is ready" completion before starting a command
-	 * transaction sequence. If the command is not executed the
-	 * completion will be completed, see below.
-	 *
-	 * We can do that inside the loop because the command variable
-	 * is invariant and thus so is the exec_cmd.
-	 */
-	info->need_wait = 1;
-	init_completion(&info->dev_ready);
-	do {
-		info->state = STATE_PREPARED;
-
-		exec_cmd = prepare_set_command(info, command, ext_cmd_type,
-					       column, page_addr);
-		if (!exec_cmd) {
-			info->need_wait = 0;
-			complete(&info->dev_ready);
-			break;
-		}
-
-		init_completion(&info->cmd_complete);
-		pxa3xx_nand_start(info);
-
-		if (!wait_for_completion_timeout(&info->cmd_complete,
-		    CHIP_DELAY_TIMEOUT)) {
-			dev_err(&info->pdev->dev, "Wait time out!!!\n");
-			/* Stop State Machine for next command cycle */
-			pxa3xx_nand_stop(info);
-			break;
-		}
-
-		/* Only a few commands need several steps */
-		if (command != NAND_CMD_PAGEPROG &&
-		    command != NAND_CMD_READ0    &&
-		    command != NAND_CMD_READOOB)
-			break;
-
-		info->cur_chunk++;
-
-		/* Check if the sequence is complete */
-		if (info->cur_chunk == info->ntotalchunks && command != NAND_CMD_PAGEPROG)
-			break;
-
-		/*
-		 * After a splitted program command sequence has issued
-		 * the command dispatch, the command sequence is complete.
-		 */
-		if (info->cur_chunk == (info->ntotalchunks + 1) &&
-		    command == NAND_CMD_PAGEPROG &&
-		    ext_cmd_type == EXT_CMD_TYPE_DISPATCH)
-			break;
-
-		if (command == NAND_CMD_READ0 || command == NAND_CMD_READOOB) {
-			/* Last read: issue a 'last naked read' */
-			if (info->cur_chunk == info->ntotalchunks - 1)
-				ext_cmd_type = EXT_CMD_TYPE_LAST_RW;
-			else
-				ext_cmd_type = EXT_CMD_TYPE_NAKED_RW;
-
-		/*
-		 * If a splitted program command has no more data to transfer,
-		 * the command dispatch must be issued to complete.
-		 */
-		} else if (command == NAND_CMD_PAGEPROG &&
-			   info->cur_chunk == info->ntotalchunks) {
-				ext_cmd_type = EXT_CMD_TYPE_DISPATCH;
-		}
-	} while (1);
-
-	info->state = STATE_IDLE;
-}
-
-static int pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd,
-		struct nand_chip *chip, const uint8_t *buf, int oob_required,
-		int page)
-{
-	nand_prog_page_begin_op(chip, page, 0, buf, mtd->writesize);
-	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
-
-	return nand_prog_page_end_op(chip);
-}
-
-static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd,
-		struct nand_chip *chip, uint8_t *buf, int oob_required,
-		int page)
-{
-	struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
-	struct pxa3xx_nand_info *info = host->info_data;
-
-	nand_read_page_op(chip, page, 0, buf, mtd->writesize);
-	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-
-	if (info->retcode == ERR_CORERR && info->use_ecc) {
-		mtd->ecc_stats.corrected += info->ecc_err_cnt;
-
-	} else if (info->retcode == ERR_UNCORERR) {
-		/*
-		 * for blank page (all 0xff), HW will calculate its ECC as
-		 * 0, which is different from the ECC information within
-		 * OOB, ignore such uncorrectable errors
-		 */
-		if (is_buf_blank(buf, mtd->writesize))
-			info->retcode = ERR_NONE;
-		else
-			mtd->ecc_stats.failed++;
-	}
-
-	return info->max_bitflips;
-}
-
-static uint8_t pxa3xx_nand_read_byte(struct mtd_info *mtd)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
-	struct pxa3xx_nand_info *info = host->info_data;
-	char retval = 0xFF;
-
-	if (info->buf_start < info->buf_count)
-		/* Has just send a new command? */
-		retval = info->data_buff[info->buf_start++];
-
-	return retval;
-}
-
-static u16 pxa3xx_nand_read_word(struct mtd_info *mtd)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
-	struct pxa3xx_nand_info *info = host->info_data;
-	u16 retval = 0xFFFF;
-
-	if (!(info->buf_start & 0x01) && info->buf_start < info->buf_count) {
-		retval = *((u16 *)(info->data_buff+info->buf_start));
-		info->buf_start += 2;
-	}
-	return retval;
-}
-
-static void pxa3xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
-	struct pxa3xx_nand_info *info = host->info_data;
-	int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
-
-	memcpy(buf, info->data_buff + info->buf_start, real_len);
-	info->buf_start += real_len;
-}
-
-static void pxa3xx_nand_write_buf(struct mtd_info *mtd,
-		const uint8_t *buf, int len)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
-	struct pxa3xx_nand_info *info = host->info_data;
-	int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
-
-	memcpy(info->data_buff + info->buf_start, buf, real_len);
-	info->buf_start += real_len;
-}
-
-static void pxa3xx_nand_select_chip(struct mtd_info *mtd, int chip)
-{
-	return;
-}
-
-static int pxa3xx_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
-	struct pxa3xx_nand_info *info = host->info_data;
-
-	if (info->need_wait) {
-		info->need_wait = 0;
-		if (!wait_for_completion_timeout(&info->dev_ready,
-		    CHIP_DELAY_TIMEOUT)) {
-			dev_err(&info->pdev->dev, "Ready time out!!!\n");
-			return NAND_STATUS_FAIL;
-		}
-	}
-
-	/* pxa3xx_nand_send_command has waited for command complete */
-	if (this->state == FL_WRITING || this->state == FL_ERASING) {
-		if (info->retcode == ERR_NONE)
-			return 0;
-		else
-			return NAND_STATUS_FAIL;
-	}
-
-	return NAND_STATUS_READY;
-}
-
-static int pxa3xx_nand_config_ident(struct pxa3xx_nand_info *info)
-{
-	struct pxa3xx_nand_host *host = info->host[info->cs];
-	struct platform_device *pdev = info->pdev;
-	struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	const struct nand_sdr_timings *timings;
-
-	/* Configure default flash values */
-	info->chunk_size = PAGE_CHUNK_SIZE;
-	info->reg_ndcr = 0x0; /* enable all interrupts */
-	info->reg_ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
-	info->reg_ndcr |= NDCR_RD_ID_CNT(READ_ID_BYTES);
-	info->reg_ndcr |= NDCR_SPARE_EN;
-
-	/* use the common timing to make a try */
-	timings = onfi_async_timing_mode_to_sdr_timings(0);
-	if (IS_ERR(timings))
-		return PTR_ERR(timings);
-
-	pxa3xx_nand_set_sdr_timing(host, timings);
-	return 0;
-}
-
-static void pxa3xx_nand_config_tail(struct pxa3xx_nand_info *info)
-{
-	struct pxa3xx_nand_host *host = info->host[info->cs];
-	struct nand_chip *chip = &host->chip;
-	struct mtd_info *mtd = nand_to_mtd(chip);
-
-	info->reg_ndcr |= (host->col_addr_cycles == 2) ? NDCR_RA_START : 0;
-	info->reg_ndcr |= (chip->page_shift == 6) ? NDCR_PG_PER_BLK : 0;
-	info->reg_ndcr |= (mtd->writesize == 2048) ? NDCR_PAGE_SZ : 0;
-}
-
-static void pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
-{
-	struct platform_device *pdev = info->pdev;
-	struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	uint32_t ndcr = nand_readl(info, NDCR);
-
-	/* Set an initial chunk size */
-	info->chunk_size = ndcr & NDCR_PAGE_SZ ? 2048 : 512;
-	info->reg_ndcr = ndcr &
-		~(NDCR_INT_MASK | NDCR_ND_ARB_EN | NFCV1_NDCR_ARB_CNTL);
-	info->reg_ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
-	info->ndtr0cs0 = nand_readl(info, NDTR0CS0);
-	info->ndtr1cs0 = nand_readl(info, NDTR1CS0);
-}
-
-static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
-{
-	struct platform_device *pdev = info->pdev;
-	struct dma_slave_config	config;
-	dma_cap_mask_t mask;
-	struct pxad_param param;
-	int ret;
-
-	info->data_buff = kmalloc(info->buf_size, GFP_KERNEL);
-	if (info->data_buff == NULL)
-		return -ENOMEM;
-	if (use_dma == 0)
-		return 0;
-
-	ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
-	if (ret)
-		return ret;
-
-	sg_init_one(&info->sg, info->data_buff, info->buf_size);
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-	param.prio = PXAD_PRIO_LOWEST;
-	param.drcmr = info->drcmr_dat;
-	info->dma_chan = dma_request_slave_channel_compat(mask, pxad_filter_fn,
-							  &param, &pdev->dev,
-							  "data");
-	if (!info->dma_chan) {
-		dev_err(&pdev->dev, "unable to request data dma channel\n");
-		return -ENODEV;
-	}
-
-	memset(&config, 0, sizeof(config));
-	config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-	config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-	config.src_addr = info->mmio_phys + NDDB;
-	config.dst_addr = info->mmio_phys + NDDB;
-	config.src_maxburst = 32;
-	config.dst_maxburst = 32;
-	ret = dmaengine_slave_config(info->dma_chan, &config);
-	if (ret < 0) {
-		dev_err(&info->pdev->dev,
-			"dma channel configuration failed: %d\n",
-			ret);
-		return ret;
-	}
-
-	/*
-	 * Now that DMA buffers are allocated we turn on
-	 * DMA proper for I/O operations.
-	 */
-	info->use_dma = 1;
-	return 0;
-}
-
-static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info)
-{
-	if (info->use_dma) {
-		dmaengine_terminate_all(info->dma_chan);
-		dma_release_channel(info->dma_chan);
-	}
-	kfree(info->data_buff);
-}
-
-static int pxa_ecc_init(struct pxa3xx_nand_info *info,
-			struct mtd_info *mtd,
-			int strength, int ecc_stepsize, int page_size)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct nand_ecc_ctrl *ecc = &chip->ecc;
-
-	if (strength == 1 && ecc_stepsize == 512 && page_size == 2048) {
-		info->nfullchunks = 1;
-		info->ntotalchunks = 1;
-		info->chunk_size = 2048;
-		info->spare_size = 40;
-		info->ecc_size = 24;
-		ecc->mode = NAND_ECC_HW;
-		ecc->size = 512;
-		ecc->strength = 1;
-
-	} else if (strength == 1 && ecc_stepsize == 512 && page_size == 512) {
-		info->nfullchunks = 1;
-		info->ntotalchunks = 1;
-		info->chunk_size = 512;
-		info->spare_size = 8;
-		info->ecc_size = 8;
-		ecc->mode = NAND_ECC_HW;
-		ecc->size = 512;
-		ecc->strength = 1;
-
-	/*
-	 * Required ECC: 4-bit correction per 512 bytes
-	 * Select: 16-bit correction per 2048 bytes
-	 */
-	} else if (strength == 4 && ecc_stepsize == 512 && page_size == 2048) {
-		info->ecc_bch = 1;
-		info->nfullchunks = 1;
-		info->ntotalchunks = 1;
-		info->chunk_size = 2048;
-		info->spare_size = 32;
-		info->ecc_size = 32;
-		ecc->mode = NAND_ECC_HW;
-		ecc->size = info->chunk_size;
-		mtd_set_ooblayout(mtd, &pxa3xx_ooblayout_ops);
-		ecc->strength = 16;
-
-	} else if (strength == 4 && ecc_stepsize == 512 && page_size == 4096) {
-		info->ecc_bch = 1;
-		info->nfullchunks = 2;
-		info->ntotalchunks = 2;
-		info->chunk_size = 2048;
-		info->spare_size = 32;
-		info->ecc_size = 32;
-		ecc->mode = NAND_ECC_HW;
-		ecc->size = info->chunk_size;
-		mtd_set_ooblayout(mtd, &pxa3xx_ooblayout_ops);
-		ecc->strength = 16;
-
-	/*
-	 * Required ECC: 8-bit correction per 512 bytes
-	 * Select: 16-bit correction per 1024 bytes
-	 */
-	} else if (strength == 8 && ecc_stepsize == 512 && page_size == 4096) {
-		info->ecc_bch = 1;
-		info->nfullchunks = 4;
-		info->ntotalchunks = 5;
-		info->chunk_size = 1024;
-		info->spare_size = 0;
-		info->last_chunk_size = 0;
-		info->last_spare_size = 64;
-		info->ecc_size = 32;
-		ecc->mode = NAND_ECC_HW;
-		ecc->size = info->chunk_size;
-		mtd_set_ooblayout(mtd, &pxa3xx_ooblayout_ops);
-		ecc->strength = 16;
-	} else {
-		dev_err(&info->pdev->dev,
-			"ECC strength %d at page size %d is not supported\n",
-			strength, page_size);
-		return -ENODEV;
-	}
-
-	dev_info(&info->pdev->dev, "ECC strength %d, ECC step size %d\n",
-		 ecc->strength, ecc->size);
-	return 0;
-}
-
-static int pxa3xx_nand_scan(struct mtd_info *mtd)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct pxa3xx_nand_host *host = nand_get_controller_data(chip);
-	struct pxa3xx_nand_info *info = host->info_data;
-	struct platform_device *pdev = info->pdev;
-	struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	int ret;
-	uint16_t ecc_strength, ecc_step;
-
-	if (pdata->keep_config) {
-		pxa3xx_nand_detect_config(info);
-	} else {
-		ret = pxa3xx_nand_config_ident(info);
-		if (ret)
-			return ret;
-	}
-
-	if (info->reg_ndcr & NDCR_DWIDTH_M)
-		chip->options |= NAND_BUSWIDTH_16;
-
-	/* Device detection must be done with ECC disabled */
-	if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 ||
-	    info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K)
-		nand_writel(info, NDECCCTRL, 0x0);
-
-	if (pdata->flash_bbt)
-		chip->bbt_options |= NAND_BBT_USE_FLASH;
-
-	chip->ecc.strength = pdata->ecc_strength;
-	chip->ecc.size = pdata->ecc_step_size;
-
-	ret = nand_scan_ident(mtd, 1, NULL);
-	if (ret)
-		return ret;
-
-	if (!pdata->keep_config) {
-		ret = pxa3xx_nand_init(host);
-		if (ret) {
-			dev_err(&info->pdev->dev, "Failed to init nand: %d\n",
-				ret);
-			return ret;
-		}
-	}
-
-	if (chip->bbt_options & NAND_BBT_USE_FLASH) {
-		/*
-		 * We'll use a bad block table stored in-flash and don't
-		 * allow writing the bad block marker to the flash.
-		 */
-		chip->bbt_options |= NAND_BBT_NO_OOB_BBM;
-		chip->bbt_td = &bbt_main_descr;
-		chip->bbt_md = &bbt_mirror_descr;
-	}
-
-	/*
-	 * If the page size is bigger than the FIFO size, let's check
-	 * we are given the right variant and then switch to the extended
-	 * (aka splitted) command handling,
-	 */
-	if (mtd->writesize > PAGE_CHUNK_SIZE) {
-		if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 ||
-		    info->variant == PXA3XX_NAND_VARIANT_ARMADA_8K) {
-			chip->cmdfunc = nand_cmdfunc_extended;
-		} else {
-			dev_err(&info->pdev->dev,
-				"unsupported page size on this variant\n");
-			return -ENODEV;
-		}
-	}
-
-	ecc_strength = chip->ecc.strength;
-	ecc_step = chip->ecc.size;
-	if (!ecc_strength || !ecc_step) {
-		ecc_strength = chip->ecc_strength_ds;
-		ecc_step = chip->ecc_step_ds;
-	}
-
-	/* Set default ECC strength requirements on non-ONFI devices */
-	if (ecc_strength < 1 && ecc_step < 1) {
-		ecc_strength = 1;
-		ecc_step = 512;
-	}
-
-	ret = pxa_ecc_init(info, mtd, ecc_strength,
-			   ecc_step, mtd->writesize);
-	if (ret)
-		return ret;
-
-	/* calculate addressing information */
-	if (mtd->writesize >= 2048)
-		host->col_addr_cycles = 2;
-	else
-		host->col_addr_cycles = 1;
-
-	/* release the initial buffer */
-	kfree(info->data_buff);
-
-	/* allocate the real data + oob buffer */
-	info->buf_size = mtd->writesize + mtd->oobsize;
-	ret = pxa3xx_nand_init_buff(info);
-	if (ret)
-		return ret;
-	info->oob_buff = info->data_buff + mtd->writesize;
-
-	if ((mtd->size >> chip->page_shift) > 65536)
-		host->row_addr_cycles = 3;
-	else
-		host->row_addr_cycles = 2;
-
-	if (!pdata->keep_config)
-		pxa3xx_nand_config_tail(info);
-
-	return nand_scan_tail(mtd);
-}
-
-static int alloc_nand_resource(struct platform_device *pdev)
-{
-	struct device_node *np = pdev->dev.of_node;
-	struct pxa3xx_nand_platform_data *pdata;
-	struct pxa3xx_nand_info *info;
-	struct pxa3xx_nand_host *host;
-	struct nand_chip *chip = NULL;
-	struct mtd_info *mtd;
-	struct resource *r;
-	int ret, irq, cs;
-
-	pdata = dev_get_platdata(&pdev->dev);
-	if (pdata->num_cs <= 0) {
-		dev_err(&pdev->dev, "invalid number of chip selects\n");
-		return -ENODEV;
-	}
-
-	info = devm_kzalloc(&pdev->dev,
-			    sizeof(*info) + sizeof(*host) * pdata->num_cs,
-			    GFP_KERNEL);
-	if (!info)
-		return -ENOMEM;
-
-	info->pdev = pdev;
-	info->variant = pxa3xx_nand_get_variant(pdev);
-	for (cs = 0; cs < pdata->num_cs; cs++) {
-		host = (void *)&info[1] + sizeof(*host) * cs;
-		chip = &host->chip;
-		nand_set_controller_data(chip, host);
-		mtd = nand_to_mtd(chip);
-		info->host[cs] = host;
-		host->cs = cs;
-		host->info_data = info;
-		mtd->dev.parent = &pdev->dev;
-		/* FIXME: all chips use the same device tree partitions */
-		nand_set_flash_node(chip, np);
-
-		nand_set_controller_data(chip, host);
-		chip->ecc.read_page	= pxa3xx_nand_read_page_hwecc;
-		chip->ecc.write_page	= pxa3xx_nand_write_page_hwecc;
-		chip->controller        = &info->controller;
-		chip->waitfunc		= pxa3xx_nand_waitfunc;
-		chip->select_chip	= pxa3xx_nand_select_chip;
-		chip->read_word		= pxa3xx_nand_read_word;
-		chip->read_byte		= pxa3xx_nand_read_byte;
-		chip->read_buf		= pxa3xx_nand_read_buf;
-		chip->write_buf		= pxa3xx_nand_write_buf;
-		chip->options		|= NAND_NO_SUBPAGE_WRITE;
-		chip->cmdfunc		= nand_cmdfunc;
-		chip->onfi_set_features	= nand_onfi_get_set_features_notsupp;
-		chip->onfi_get_features	= nand_onfi_get_set_features_notsupp;
-	}
-
-	nand_hw_control_init(chip->controller);
-	info->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(info->clk)) {
-		ret = PTR_ERR(info->clk);
-		dev_err(&pdev->dev, "failed to get nand clock: %d\n", ret);
-		return ret;
-	}
-	ret = clk_prepare_enable(info->clk);
-	if (ret < 0)
-		return ret;
-
-	if (!np && use_dma) {
-		r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-		if (r == NULL) {
-			dev_err(&pdev->dev,
-				"no resource defined for data DMA\n");
-			ret = -ENXIO;
-			goto fail_disable_clk;
-		}
-		info->drcmr_dat = r->start;
-	}
-
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "no IRQ resource defined\n");
-		ret = -ENXIO;
-		goto fail_disable_clk;
-	}
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	info->mmio_base = devm_ioremap_resource(&pdev->dev, r);
-	if (IS_ERR(info->mmio_base)) {
-		ret = PTR_ERR(info->mmio_base);
-		dev_err(&pdev->dev, "failed to map register space: %d\n", ret);
-		goto fail_disable_clk;
-	}
-	info->mmio_phys = r->start;
-
-	/* Allocate a buffer to allow flash detection */
-	info->buf_size = INIT_BUFFER_SIZE;
-	info->data_buff = kmalloc(info->buf_size, GFP_KERNEL);
-	if (info->data_buff == NULL) {
-		ret = -ENOMEM;
-		goto fail_disable_clk;
-	}
-
-	/* initialize all interrupts to be disabled */
-	disable_int(info, NDSR_MASK);
-
-	ret = request_threaded_irq(irq, pxa3xx_nand_irq,
-				   pxa3xx_nand_irq_thread, IRQF_ONESHOT,
-				   pdev->name, info);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to request IRQ: %d\n", ret);
-		goto fail_free_buf;
-	}
-
-	platform_set_drvdata(pdev, info);
-
-	return 0;
-
-fail_free_buf:
-	free_irq(irq, info);
-	kfree(info->data_buff);
-fail_disable_clk:
-	clk_disable_unprepare(info->clk);
-	return ret;
-}
-
-static int pxa3xx_nand_remove(struct platform_device *pdev)
-{
-	struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
-	struct pxa3xx_nand_platform_data *pdata;
-	int irq, cs;
-
-	if (!info)
-		return 0;
-
-	pdata = dev_get_platdata(&pdev->dev);
-
-	irq = platform_get_irq(pdev, 0);
-	if (irq >= 0)
-		free_irq(irq, info);
-	pxa3xx_nand_free_buff(info);
-
-	/*
-	 * In the pxa3xx case, the DFI bus is shared between the SMC and NFC.
-	 * In order to prevent a lockup of the system bus, the DFI bus
-	 * arbitration is granted to SMC upon driver removal. This is done by
-	 * setting the x_ARB_CNTL bit, which also prevents the NAND to have
-	 * access to the bus anymore.
-	 */
-	nand_writel(info, NDCR,
-		    (nand_readl(info, NDCR) & ~NDCR_ND_ARB_EN) |
-		    NFCV1_NDCR_ARB_CNTL);
-	clk_disable_unprepare(info->clk);
-
-	for (cs = 0; cs < pdata->num_cs; cs++)
-		nand_release(nand_to_mtd(&info->host[cs]->chip));
-	return 0;
-}
-
-static int pxa3xx_nand_probe_dt(struct platform_device *pdev)
-{
-	struct pxa3xx_nand_platform_data *pdata;
-	struct device_node *np = pdev->dev.of_node;
-	const struct of_device_id *of_id =
-			of_match_device(pxa3xx_nand_dt_ids, &pdev->dev);
-
-	if (!of_id)
-		return 0;
-
-	/*
-	 * Some SoCs like A7k/A8k need to enable manually the NAND
-	 * controller to avoid being bootloader dependent. This is done
-	 * through the use of a single bit in the System Functions registers.
-	 */
-	if (pxa3xx_nand_get_variant(pdev) == PXA3XX_NAND_VARIANT_ARMADA_8K) {
-		struct regmap *sysctrl_base = syscon_regmap_lookup_by_phandle(
-			pdev->dev.of_node, "marvell,system-controller");
-		u32 reg;
-
-		if (IS_ERR(sysctrl_base))
-			return PTR_ERR(sysctrl_base);
-
-		regmap_read(sysctrl_base, GENCONF_SOC_DEVICE_MUX, &reg);
-		reg |= GENCONF_SOC_DEVICE_MUX_NFC_EN;
-		regmap_write(sysctrl_base, GENCONF_SOC_DEVICE_MUX, reg);
-	}
-
-	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
-	if (!pdata)
-		return -ENOMEM;
-
-	if (of_get_property(np, "marvell,nand-enable-arbiter", NULL))
-		pdata->enable_arbiter = 1;
-	if (of_get_property(np, "marvell,nand-keep-config", NULL))
-		pdata->keep_config = 1;
-	of_property_read_u32(np, "num-cs", &pdata->num_cs);
-
-	pdev->dev.platform_data = pdata;
-
-	return 0;
-}
-
-static int pxa3xx_nand_probe(struct platform_device *pdev)
-{
-	struct pxa3xx_nand_platform_data *pdata;
-	struct pxa3xx_nand_info *info;
-	int ret, cs, probe_success, dma_available;
-
-	dma_available = IS_ENABLED(CONFIG_ARM) &&
-		(IS_ENABLED(CONFIG_ARCH_PXA) || IS_ENABLED(CONFIG_ARCH_MMP));
-	if (use_dma && !dma_available) {
-		use_dma = 0;
-		dev_warn(&pdev->dev,
-			 "This platform can't do DMA on this device\n");
-	}
-
-	ret = pxa3xx_nand_probe_dt(pdev);
-	if (ret)
-		return ret;
-
-	pdata = dev_get_platdata(&pdev->dev);
-	if (!pdata) {
-		dev_err(&pdev->dev, "no platform data defined\n");
-		return -ENODEV;
-	}
-
-	ret = alloc_nand_resource(pdev);
-	if (ret)
-		return ret;
-
-	info = platform_get_drvdata(pdev);
-	probe_success = 0;
-	for (cs = 0; cs < pdata->num_cs; cs++) {
-		struct mtd_info *mtd = nand_to_mtd(&info->host[cs]->chip);
-
-		/*
-		 * The mtd name matches the one used in 'mtdparts' kernel
-		 * parameter. This name cannot be changed or otherwise
-		 * user's mtd partitions configuration would get broken.
-		 */
-		mtd->name = "pxa3xx_nand-0";
-		info->cs = cs;
-		ret = pxa3xx_nand_scan(mtd);
-		if (ret) {
-			dev_warn(&pdev->dev, "failed to scan nand at cs %d\n",
-				cs);
-			continue;
-		}
-
-		ret = mtd_device_register(mtd, pdata->parts[cs],
-					  pdata->nr_parts[cs]);
-		if (!ret)
-			probe_success = 1;
-	}
-
-	if (!probe_success) {
-		pxa3xx_nand_remove(pdev);
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int pxa3xx_nand_suspend(struct device *dev)
-{
-	struct pxa3xx_nand_info *info = dev_get_drvdata(dev);
-
-	if (info->state) {
-		dev_err(dev, "driver busy, state = %d\n", info->state);
-		return -EAGAIN;
-	}
-
-	clk_disable(info->clk);
-	return 0;
-}
-
-static int pxa3xx_nand_resume(struct device *dev)
-{
-	struct pxa3xx_nand_info *info = dev_get_drvdata(dev);
-	int ret;
-
-	ret = clk_enable(info->clk);
-	if (ret < 0)
-		return ret;
-
-	/* We don't want to handle interrupt without calling mtd routine */
-	disable_int(info, NDCR_INT_MASK);
-
-	/*
-	 * Directly set the chip select to a invalid value,
-	 * then the driver would reset the timing according
-	 * to current chip select at the beginning of cmdfunc
-	 */
-	info->cs = 0xff;
-
-	/*
-	 * As the spec says, the NDSR would be updated to 0x1800 when
-	 * doing the nand_clk disable/enable.
-	 * To prevent it damaging state machine of the driver, clear
-	 * all status before resume
-	 */
-	nand_writel(info, NDSR, NDSR_MASK);
-
-	return 0;
-}
-#else
-#define pxa3xx_nand_suspend	NULL
-#define pxa3xx_nand_resume	NULL
-#endif
-
-static const struct dev_pm_ops pxa3xx_nand_pm_ops = {
-	.suspend	= pxa3xx_nand_suspend,
-	.resume		= pxa3xx_nand_resume,
-};
-
-static struct platform_driver pxa3xx_nand_driver = {
-	.driver = {
-		.name	= "pxa3xx-nand",
-		.of_match_table = pxa3xx_nand_dt_ids,
-		.pm	= &pxa3xx_nand_pm_ops,
-	},
-	.probe		= pxa3xx_nand_probe,
-	.remove		= pxa3xx_nand_remove,
-};
-
-module_platform_driver(pxa3xx_nand_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("PXA3xx NAND controller driver");
diff --git a/drivers/phy/ti/phy-da8xx-usb.c b/drivers/phy/ti/phy-da8xx-usb.c
index 1b82bff6330f..befb886ff121 100644
--- a/drivers/phy/ti/phy-da8xx-usb.c
+++ b/drivers/phy/ti/phy-da8xx-usb.c
@@ -20,6 +20,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/phy/phy.h>
+#include <linux/platform_data/phy-da8xx-usb.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
@@ -145,6 +146,7 @@ static struct phy *da8xx_usb_phy_of_xlate(struct device *dev,
 static int da8xx_usb_phy_probe(struct platform_device *pdev)
 {
 	struct device		*dev = &pdev->dev;
+	struct da8xx_usb_phy_platform_data *pdata = dev->platform_data;
 	struct device_node	*node = dev->of_node;
 	struct da8xx_usb_phy	*d_phy;
 
@@ -152,25 +154,25 @@ static int da8xx_usb_phy_probe(struct platform_device *pdev)
 	if (!d_phy)
 		return -ENOMEM;
 
-	if (node)
+	if (pdata)
+		d_phy->regmap = pdata->cfgchip;
+	else
 		d_phy->regmap = syscon_regmap_lookup_by_compatible(
 							"ti,da830-cfgchip");
-	else
-		d_phy->regmap = syscon_regmap_lookup_by_pdevname("syscon");
 	if (IS_ERR(d_phy->regmap)) {
 		dev_err(dev, "Failed to get syscon\n");
 		return PTR_ERR(d_phy->regmap);
 	}
 
-	d_phy->usb11_clk = devm_clk_get(dev, "usb11_phy");
+	d_phy->usb11_clk = devm_clk_get(dev, "usb1_clk48");
 	if (IS_ERR(d_phy->usb11_clk)) {
-		dev_err(dev, "Failed to get usb11_phy clock\n");
+		dev_err(dev, "Failed to get usb1_clk48\n");
 		return PTR_ERR(d_phy->usb11_clk);
 	}
 
-	d_phy->usb20_clk = devm_clk_get(dev, "usb20_phy");
+	d_phy->usb20_clk = devm_clk_get(dev, "usb0_clk48");
 	if (IS_ERR(d_phy->usb20_clk)) {
-		dev_err(dev, "Failed to get usb20_phy clock\n");
+		dev_err(dev, "Failed to get usb0_clk48\n");
 		return PTR_ERR(d_phy->usb20_clk);
 	}
 
diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c
index 89bf4d6cb486..cb0237143dbe 100644
--- a/drivers/power/avs/smartreflex.c
+++ b/drivers/power/avs/smartreflex.c
@@ -132,12 +132,16 @@ static void sr_set_clk_length(struct omap_sr *sr)
 	struct clk *fck;
 	u32 fclk_speed;
 
-	fck = clk_get(&sr->pdev->dev, "fck");
-
+	/* Try interconnect target module fck first if it already exists */
+	fck = clk_get(sr->pdev->dev.parent, "fck");
 	if (IS_ERR(fck)) {
-		dev_err(&sr->pdev->dev, "%s: unable to get fck for device %s\n",
-			__func__, dev_name(&sr->pdev->dev));
-		return;
+		fck = clk_get(&sr->pdev->dev, "fck");
+		if (IS_ERR(fck)) {
+			dev_err(&sr->pdev->dev,
+				"%s: unable to get fck for device %s\n",
+				__func__, dev_name(&sr->pdev->dev));
+			return;
+		}
 	}
 
 	fclk_speed = clk_get_rate(fck);
@@ -838,7 +842,7 @@ static int omap_sr_autocomp_store(void *data, u64 val)
 DEFINE_SIMPLE_ATTRIBUTE(pm_sr_fops, omap_sr_autocomp_show,
 			omap_sr_autocomp_store, "%llu\n");
 
-static int __init omap_sr_probe(struct platform_device *pdev)
+static int omap_sr_probe(struct platform_device *pdev)
 {
 	struct omap_sr *sr_info;
 	struct omap_sr_data *pdata = pdev->dev.platform_data;
@@ -898,6 +902,12 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 
 	list_add(&sr_info->node, &sr_list);
 
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(&pdev->dev);
+		goto err_list_del;
+	}
+
 	/*
 	 * Call into late init to do initializations that require
 	 * both sr driver and sr class driver to be initiallized.
@@ -966,12 +976,17 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 
 	}
 
+	pm_runtime_put_sync(&pdev->dev);
+
 	return ret;
 
 err_debugfs:
 	debugfs_remove_recursive(sr_info->dbg_dir);
 err_list_del:
 	list_del(&sr_info->node);
+
+	pm_runtime_put_sync(&pdev->dev);
+
 	return ret;
 }
 
@@ -1025,11 +1040,23 @@ static void omap_sr_shutdown(struct platform_device *pdev)
 	return;
 }
 
+static const struct of_device_id omap_sr_match[] = {
+	{ .compatible = "ti,omap3-smartreflex-core", },
+	{ .compatible = "ti,omap3-smartreflex-mpu-iva", },
+	{ .compatible = "ti,omap4-smartreflex-core", },
+	{ .compatible = "ti,omap4-smartreflex-mpu", },
+	{ .compatible = "ti,omap4-smartreflex-iva", },
+	{  },
+};
+MODULE_DEVICE_TABLE(of, omap_sr_match);
+
 static struct platform_driver smartreflex_driver = {
+	.probe		= omap_sr_probe,
 	.remove         = omap_sr_remove,
 	.shutdown	= omap_sr_shutdown,
 	.driver		= {
 		.name	= DRIVER_NAME,
+		.of_match_table	= omap_sr_match,
 	},
 };
 
@@ -1048,7 +1075,7 @@ static int __init sr_init(void)
 	else
 		pr_warn("%s: No PMIC hook to init smartreflex\n", __func__);
 
-	ret = platform_driver_probe(&smartreflex_driver, omap_sr_probe);
+	ret = platform_driver_register(&smartreflex_driver);
 	if (ret) {
 		pr_err("%s: platform driver register failed for SR\n",
 		       __func__);
diff --git a/drivers/pwm/pwm-omap-dmtimer.c b/drivers/pwm/pwm-omap-dmtimer.c
index 5ad42f33e70c..665da3c8fbce 100644
--- a/drivers/pwm/pwm-omap-dmtimer.c
+++ b/drivers/pwm/pwm-omap-dmtimer.c
@@ -23,6 +23,7 @@
 #include <linux/mutex.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/platform_data/dmtimer-omap.h>
 #include <linux/platform_data/pwm_omap_dmtimer.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
@@ -37,7 +38,7 @@ struct pwm_omap_dmtimer_chip {
 	struct pwm_chip chip;
 	struct mutex mutex;
 	pwm_omap_dmtimer *dm_timer;
-	struct pwm_omap_dmtimer_pdata *pdata;
+	const struct omap_dm_timer_ops *pdata;
 	struct platform_device *dm_timer_pdev;
 };
 
@@ -242,19 +243,35 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct device_node *timer;
+	struct platform_device *timer_pdev;
 	struct pwm_omap_dmtimer_chip *omap;
-	struct pwm_omap_dmtimer_pdata *pdata;
+	struct dmtimer_platform_data *timer_pdata;
+	const struct omap_dm_timer_ops *pdata;
 	pwm_omap_dmtimer *dm_timer;
 	u32 v;
-	int status;
+	int ret = 0;
 
-	pdata = dev_get_platdata(&pdev->dev);
-	if (!pdata) {
-		dev_err(&pdev->dev, "Missing dmtimer platform data\n");
-		return -EINVAL;
+	timer = of_parse_phandle(np, "ti,timers", 0);
+	if (!timer)
+		return -ENODEV;
+
+	timer_pdev = of_find_device_by_node(timer);
+	if (!timer_pdev) {
+		dev_err(&pdev->dev, "Unable to find Timer pdev\n");
+		ret = -ENODEV;
+		goto put;
 	}
 
-	if (!pdata->request_by_node ||
+	timer_pdata = dev_get_platdata(&timer_pdev->dev);
+	if (!timer_pdata) {
+		dev_err(&pdev->dev, "dmtimer pdata structure NULL\n");
+		ret = -EINVAL;
+		goto put;
+	}
+
+	pdata = timer_pdata->timer_ops;
+
+	if (!pdata || !pdata->request_by_node ||
 	    !pdata->free ||
 	    !pdata->enable ||
 	    !pdata->disable ||
@@ -267,21 +284,26 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
 	    !pdata->set_prescaler ||
 	    !pdata->write_counter) {
 		dev_err(&pdev->dev, "Incomplete dmtimer pdata structure\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto put;
 	}
 
-	timer = of_parse_phandle(np, "ti,timers", 0);
-	if (!timer)
-		return -ENODEV;
-
 	if (!of_get_property(timer, "ti,timer-pwm", NULL)) {
 		dev_err(&pdev->dev, "Missing ti,timer-pwm capability\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto put;
 	}
 
 	dm_timer = pdata->request_by_node(timer);
-	if (!dm_timer)
-		return -EPROBE_DEFER;
+	if (!dm_timer) {
+		ret = -EPROBE_DEFER;
+		goto put;
+	}
+
+put:
+	of_node_put(timer);
+	if (ret < 0)
+		return ret;
 
 	omap = devm_kzalloc(&pdev->dev, sizeof(*omap), GFP_KERNEL);
 	if (!omap) {
@@ -291,13 +313,7 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
 
 	omap->pdata = pdata;
 	omap->dm_timer = dm_timer;
-
-	omap->dm_timer_pdev = of_find_device_by_node(timer);
-	if (!omap->dm_timer_pdev) {
-		dev_err(&pdev->dev, "Unable to find timer pdev\n");
-		omap->pdata->free(dm_timer);
-		return -EINVAL;
-	}
+	omap->dm_timer_pdev = timer_pdev;
 
 	/*
 	 * Ensure that the timer is stopped before we allow PWM core to call
@@ -322,11 +338,11 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
 
 	mutex_init(&omap->mutex);
 
-	status = pwmchip_add(&omap->chip);
-	if (status < 0) {
+	ret = pwmchip_add(&omap->chip);
+	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to register PWM\n");
 		omap->pdata->free(omap->dm_timer);
-		return status;
+		return ret;
 	}
 
 	platform_set_drvdata(pdev, omap);
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 09550b1da56d..3bbe6114a420 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -3,8 +3,8 @@ config SOC_RENESAS
 	default y if ARCH_RENESAS
 	select SOC_BUS
 	select RST_RCAR if ARCH_RCAR_GEN1 || ARCH_RCAR_GEN2 || \
-			   ARCH_R8A7795 || ARCH_R8A7796 || ARCH_R8A77970 || \
-			   ARCH_R8A77995
+			   ARCH_R8A7795 || ARCH_R8A7796 || ARCH_R8A77965 || \
+			   ARCH_R8A77970 || ARCH_R8A77980 || ARCH_R8A77995
 	select SYSC_R8A7743 if ARCH_R8A7743
 	select SYSC_R8A7745 if ARCH_R8A7745
 	select SYSC_R8A7779 if ARCH_R8A7779
@@ -14,7 +14,9 @@ config SOC_RENESAS
 	select SYSC_R8A7794 if ARCH_R8A7794
 	select SYSC_R8A7795 if ARCH_R8A7795
 	select SYSC_R8A7796 if ARCH_R8A7796
+	select SYSC_R8A77965 if ARCH_R8A77965
 	select SYSC_R8A77970 if ARCH_R8A77970
+	select SYSC_R8A77980 if ARCH_R8A77980
 	select SYSC_R8A77995 if ARCH_R8A77995
 
 if SOC_RENESAS
@@ -56,10 +58,18 @@ config SYSC_R8A7796
 	bool "R-Car M3-W System Controller support" if COMPILE_TEST
 	select SYSC_RCAR
 
+config SYSC_R8A77965
+	bool "R-Car M3-N System Controller support" if COMPILE_TEST
+	select SYSC_RCAR
+
 config SYSC_R8A77970
 	bool "R-Car V3M System Controller support" if COMPILE_TEST
 	select SYSC_RCAR
 
+config SYSC_R8A77980
+	bool "R-Car V3H System Controller support" if COMPILE_TEST
+	select SYSC_RCAR
+
 config SYSC_R8A77995
 	bool "R-Car D3 System Controller support" if COMPILE_TEST
 	select SYSC_RCAR
diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile
index 845d62a08ce1..ccb5ec57a262 100644
--- a/drivers/soc/renesas/Makefile
+++ b/drivers/soc/renesas/Makefile
@@ -12,7 +12,9 @@ obj-$(CONFIG_SYSC_R8A7792)	+= r8a7792-sysc.o
 obj-$(CONFIG_SYSC_R8A7794)	+= r8a7794-sysc.o
 obj-$(CONFIG_SYSC_R8A7795)	+= r8a7795-sysc.o
 obj-$(CONFIG_SYSC_R8A7796)	+= r8a7796-sysc.o
+obj-$(CONFIG_SYSC_R8A77965)	+= r8a77965-sysc.o
 obj-$(CONFIG_SYSC_R8A77970)	+= r8a77970-sysc.o
+obj-$(CONFIG_SYSC_R8A77980)	+= r8a77980-sysc.o
 obj-$(CONFIG_SYSC_R8A77995)	+= r8a77995-sysc.o
 
 # Family
diff --git a/drivers/soc/renesas/r8a77965-sysc.c b/drivers/soc/renesas/r8a77965-sysc.c
new file mode 100644
index 000000000000..d7f7928e3c07
--- /dev/null
+++ b/drivers/soc/renesas/r8a77965-sysc.c
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas R-Car M3-N System Controller
+ * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ *
+ * Based on Renesas R-Car M3-W System Controller
+ * Copyright (C) 2016 Glider bvba
+ */
+
+#include <linux/bug.h>
+#include <linux/kernel.h>
+
+#include <dt-bindings/power/r8a77965-sysc.h>
+
+#include "rcar-sysc.h"
+
+static const struct rcar_sysc_area r8a77965_areas[] __initconst = {
+	{ "always-on",	    0, 0, R8A77965_PD_ALWAYS_ON, -1, PD_ALWAYS_ON },
+	{ "ca57-scu",	0x1c0, 0, R8A77965_PD_CA57_SCU,	R8A77965_PD_ALWAYS_ON,
+	  PD_SCU },
+	{ "ca57-cpu0",	 0x80, 0, R8A77965_PD_CA57_CPU0, R8A77965_PD_CA57_SCU,
+	  PD_CPU_NOCR },
+	{ "ca57-cpu1",	 0x80, 1, R8A77965_PD_CA57_CPU1, R8A77965_PD_CA57_SCU,
+	  PD_CPU_NOCR },
+	{ "cr7",	0x240, 0, R8A77965_PD_CR7,	R8A77965_PD_ALWAYS_ON },
+	{ "a3vc",	0x380, 0, R8A77965_PD_A3VC,	R8A77965_PD_ALWAYS_ON },
+	{ "a3vp",	0x340, 0, R8A77965_PD_A3VP,	R8A77965_PD_ALWAYS_ON },
+	{ "a2vc1",	0x3c0, 1, R8A77965_PD_A2VC1,	R8A77965_PD_A3VC },
+	{ "3dg-a",	0x100, 0, R8A77965_PD_3DG_A,	R8A77965_PD_ALWAYS_ON },
+	{ "3dg-b",	0x100, 1, R8A77965_PD_3DG_B,	R8A77965_PD_3DG_A },
+	{ "a3ir",	0x180, 0, R8A77965_PD_A3IR,	R8A77965_PD_ALWAYS_ON },
+};
+
+const struct rcar_sysc_info r8a77965_sysc_info __initconst = {
+	.areas = r8a77965_areas,
+	.num_areas = ARRAY_SIZE(r8a77965_areas),
+};
diff --git a/drivers/soc/renesas/r8a77970-sysc.c b/drivers/soc/renesas/r8a77970-sysc.c
index 8c614164718e..caf894f193ed 100644
--- a/drivers/soc/renesas/r8a77970-sysc.c
+++ b/drivers/soc/renesas/r8a77970-sysc.c
@@ -25,12 +25,12 @@ static const struct rcar_sysc_area r8a77970_areas[] __initconst = {
 	  PD_CPU_NOCR },
 	{ "cr7",	0x240, 0, R8A77970_PD_CR7,	R8A77970_PD_ALWAYS_ON },
 	{ "a3ir",	0x180, 0, R8A77970_PD_A3IR,	R8A77970_PD_ALWAYS_ON },
-	{ "a2ir0",	0x400, 0, R8A77970_PD_A2IR0,	R8A77970_PD_ALWAYS_ON },
-	{ "a2ir1",	0x400, 1, R8A77970_PD_A2IR1,	R8A77970_PD_A2IR0 },
-	{ "a2ir2",	0x400, 2, R8A77970_PD_A2IR2,	R8A77970_PD_A2IR0 },
-	{ "a2ir3",	0x400, 3, R8A77970_PD_A2IR3,	R8A77970_PD_A2IR0 },
-	{ "a2sc0",	0x400, 4, R8A77970_PD_A2SC0,	R8A77970_PD_ALWAYS_ON },
-	{ "a2sc1",	0x400, 5, R8A77970_PD_A2SC1,	R8A77970_PD_A2SC0 },
+	{ "a2ir0",	0x400, 0, R8A77970_PD_A2IR0,	R8A77970_PD_A3IR },
+	{ "a2ir1",	0x400, 1, R8A77970_PD_A2IR1,	R8A77970_PD_A3IR },
+	{ "a2ir2",	0x400, 2, R8A77970_PD_A2IR2,	R8A77970_PD_A3IR },
+	{ "a2ir3",	0x400, 3, R8A77970_PD_A2IR3,	R8A77970_PD_A3IR },
+	{ "a2sc0",	0x400, 4, R8A77970_PD_A2SC0,	R8A77970_PD_A3IR },
+	{ "a2sc1",	0x400, 5, R8A77970_PD_A2SC1,	R8A77970_PD_A3IR },
 };
 
 const struct rcar_sysc_info r8a77970_sysc_info __initconst = {
diff --git a/drivers/soc/renesas/r8a77980-sysc.c b/drivers/soc/renesas/r8a77980-sysc.c
new file mode 100644
index 000000000000..9265fb525ef3
--- /dev/null
+++ b/drivers/soc/renesas/r8a77980-sysc.c
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas R-Car V3H System Controller
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+#include <linux/bug.h>
+#include <linux/kernel.h>
+
+#include <dt-bindings/power/r8a77980-sysc.h>
+
+#include "rcar-sysc.h"
+
+static const struct rcar_sysc_area r8a77980_areas[] __initconst = {
+	{ "always-on",	    0, 0, R8A77980_PD_ALWAYS_ON, -1, PD_ALWAYS_ON },
+	{ "ca53-scu",	0x140, 0, R8A77980_PD_CA53_SCU,	R8A77980_PD_ALWAYS_ON,
+	  PD_SCU },
+	{ "ca53-cpu0",	0x200, 0, R8A77980_PD_CA53_CPU0, R8A77980_PD_CA53_SCU,
+	  PD_CPU_NOCR },
+	{ "ca53-cpu1",	0x200, 1, R8A77980_PD_CA53_CPU1, R8A77980_PD_CA53_SCU,
+	  PD_CPU_NOCR },
+	{ "ca53-cpu2",	0x200, 2, R8A77980_PD_CA53_CPU2, R8A77980_PD_CA53_SCU,
+	  PD_CPU_NOCR },
+	{ "ca53-cpu3",	0x200, 3, R8A77980_PD_CA53_CPU3, R8A77980_PD_CA53_SCU,
+	  PD_CPU_NOCR },
+	{ "cr7",	0x240, 0, R8A77980_PD_CR7,	R8A77980_PD_ALWAYS_ON },
+	{ "a3ir",	0x180, 0, R8A77980_PD_A3IR,	R8A77980_PD_ALWAYS_ON },
+	{ "a2ir0",	0x400, 0, R8A77980_PD_A2IR0,	R8A77980_PD_A3IR },
+	{ "a2ir1",	0x400, 1, R8A77980_PD_A2IR1,	R8A77980_PD_A3IR },
+	{ "a2ir2",	0x400, 2, R8A77980_PD_A2IR2,	R8A77980_PD_A3IR },
+	{ "a2ir3",	0x400, 3, R8A77980_PD_A2IR3,	R8A77980_PD_A3IR },
+	{ "a2ir4",	0x400, 4, R8A77980_PD_A2IR4,	R8A77980_PD_A3IR },
+	{ "a2ir5",	0x400, 5, R8A77980_PD_A2IR5,	R8A77980_PD_A3IR },
+	{ "a2sc0",	0x400, 6, R8A77980_PD_A2SC0,	R8A77980_PD_A3IR },
+	{ "a2sc1",	0x400, 7, R8A77980_PD_A2SC1,	R8A77980_PD_A3IR },
+	{ "a2sc2",	0x400, 8, R8A77980_PD_A2SC2,	R8A77980_PD_A3IR },
+	{ "a2sc3",	0x400, 9, R8A77980_PD_A2SC3,	R8A77980_PD_A3IR },
+	{ "a2sc4",	0x400, 10, R8A77980_PD_A2SC4,	R8A77980_PD_A3IR },
+	{ "a2pd0",	0x400, 11, R8A77980_PD_A2PD0,	R8A77980_PD_A3IR },
+	{ "a2pd1",	0x400, 12, R8A77980_PD_A2PD1,	R8A77980_PD_A3IR },
+	{ "a2cn",	0x400, 13, R8A77980_PD_A2CN,	R8A77980_PD_A3IR },
+	{ "a3vip",	0x2c0, 0, R8A77980_PD_A3VIP,	R8A77980_PD_ALWAYS_ON },
+	{ "a3vip1",	0x300, 0, R8A77980_PD_A3VIP1,	R8A77980_PD_A3VIP },
+	{ "a3vip2",	0x280, 0, R8A77980_PD_A3VIP2,	R8A77980_PD_A3VIP },
+};
+
+const struct rcar_sysc_info r8a77980_sysc_info __initconst = {
+	.areas = r8a77980_areas,
+	.num_areas = ARRAY_SIZE(r8a77980_areas),
+};
diff --git a/drivers/soc/renesas/rcar-rst.c b/drivers/soc/renesas/rcar-rst.c
index 3316b028f231..8e9cb7996ab0 100644
--- a/drivers/soc/renesas/rcar-rst.c
+++ b/drivers/soc/renesas/rcar-rst.c
@@ -13,8 +13,18 @@
 #include <linux/of_address.h>
 #include <linux/soc/renesas/rcar-rst.h>
 
+#define WDTRSTCR_RESET		0xA55A0002
+#define WDTRSTCR		0x0054
+
+static int rcar_rst_enable_wdt_reset(void __iomem *base)
+{
+	iowrite32(WDTRSTCR_RESET, base + WDTRSTCR);
+	return 0;
+}
+
 struct rst_config {
-	unsigned int modemr;	/* Mode Monitoring Register Offset */
+	unsigned int modemr;		/* Mode Monitoring Register Offset */
+	int (*configure)(void *base);	/* Platform specific configuration */
 };
 
 static const struct rst_config rcar_rst_gen1 __initconst = {
@@ -23,6 +33,11 @@ static const struct rst_config rcar_rst_gen1 __initconst = {
 
 static const struct rst_config rcar_rst_gen2 __initconst = {
 	.modemr = 0x60,
+	.configure = rcar_rst_enable_wdt_reset,
+};
+
+static const struct rst_config rcar_rst_gen3 __initconst = {
+	.modemr = 0x60,
 };
 
 static const struct of_device_id rcar_rst_matches[] __initconst = {
@@ -38,11 +53,13 @@ static const struct of_device_id rcar_rst_matches[] __initconst = {
 	{ .compatible = "renesas,r8a7792-rst", .data = &rcar_rst_gen2 },
 	{ .compatible = "renesas,r8a7793-rst", .data = &rcar_rst_gen2 },
 	{ .compatible = "renesas,r8a7794-rst", .data = &rcar_rst_gen2 },
-	/* R-Car Gen3 is handled like R-Car Gen2 */
-	{ .compatible = "renesas,r8a7795-rst", .data = &rcar_rst_gen2 },
-	{ .compatible = "renesas,r8a7796-rst", .data = &rcar_rst_gen2 },
-	{ .compatible = "renesas,r8a77970-rst", .data = &rcar_rst_gen2 },
-	{ .compatible = "renesas,r8a77995-rst", .data = &rcar_rst_gen2 },
+	/* R-Car Gen3 */
+	{ .compatible = "renesas,r8a7795-rst", .data = &rcar_rst_gen3 },
+	{ .compatible = "renesas,r8a7796-rst", .data = &rcar_rst_gen3 },
+	{ .compatible = "renesas,r8a77965-rst", .data = &rcar_rst_gen3 },
+	{ .compatible = "renesas,r8a77970-rst", .data = &rcar_rst_gen3 },
+	{ .compatible = "renesas,r8a77980-rst", .data = &rcar_rst_gen3 },
+	{ .compatible = "renesas,r8a77995-rst", .data = &rcar_rst_gen3 },
 	{ /* sentinel */ }
 };
 
@@ -71,6 +88,14 @@ static int __init rcar_rst_init(void)
 	rcar_rst_base = base;
 	cfg = match->data;
 	saved_mode = ioread32(base + cfg->modemr);
+	if (cfg->configure) {
+		error = cfg->configure(base);
+		if (error) {
+			pr_warn("%pOF: Cannot run SoC specific configuration\n",
+				np);
+			goto out_put;
+		}
+	}
 
 	pr_debug("%pOF: MODE = 0x%08x\n", np, saved_mode);
 
diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 52c25a5e2646..faf20e719361 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -254,7 +254,7 @@ finalize:
 	pm_genpd_init(genpd, gov, false);
 }
 
-static const struct of_device_id rcar_sysc_matches[] = {
+static const struct of_device_id rcar_sysc_matches[] __initconst = {
 #ifdef CONFIG_SYSC_R8A7743
 	{ .compatible = "renesas,r8a7743-sysc", .data = &r8a7743_sysc_info },
 #endif
@@ -284,9 +284,15 @@ static const struct of_device_id rcar_sysc_matches[] = {
 #ifdef CONFIG_SYSC_R8A7796
 	{ .compatible = "renesas,r8a7796-sysc", .data = &r8a7796_sysc_info },
 #endif
+#ifdef CONFIG_SYSC_R8A77965
+	{ .compatible = "renesas,r8a77965-sysc", .data = &r8a77965_sysc_info },
+#endif
 #ifdef CONFIG_SYSC_R8A77970
 	{ .compatible = "renesas,r8a77970-sysc", .data = &r8a77970_sysc_info },
 #endif
+#ifdef CONFIG_SYSC_R8A77980
+	{ .compatible = "renesas,r8a77980-sysc", .data = &r8a77980_sysc_info },
+#endif
 #ifdef CONFIG_SYSC_R8A77995
 	{ .compatible = "renesas,r8a77995-sysc", .data = &r8a77995_sysc_info },
 #endif
diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h
index 9d9daf9eb91b..dcdc9ec8eba7 100644
--- a/drivers/soc/renesas/rcar-sysc.h
+++ b/drivers/soc/renesas/rcar-sysc.h
@@ -58,7 +58,9 @@ extern const struct rcar_sysc_info r8a7792_sysc_info;
 extern const struct rcar_sysc_info r8a7794_sysc_info;
 extern const struct rcar_sysc_info r8a7795_sysc_info;
 extern const struct rcar_sysc_info r8a7796_sysc_info;
+extern const struct rcar_sysc_info r8a77965_sysc_info;
 extern const struct rcar_sysc_info r8a77970_sysc_info;
+extern const struct rcar_sysc_info r8a77980_sysc_info;
 extern const struct rcar_sysc_info r8a77995_sysc_info;
 
 
diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c
index 926b7fd6db2d..ea71c413c926 100644
--- a/drivers/soc/renesas/renesas-soc.c
+++ b/drivers/soc/renesas/renesas-soc.c
@@ -144,11 +144,21 @@ static const struct renesas_soc soc_rcar_m3_w __initconst __maybe_unused = {
 	.id	= 0x52,
 };
 
+static const struct renesas_soc soc_rcar_m3_n __initconst __maybe_unused = {
+	.family = &fam_rcar_gen3,
+	.id     = 0x55,
+};
+
 static const struct renesas_soc soc_rcar_v3m __initconst __maybe_unused = {
 	.family	= &fam_rcar_gen3,
 	.id	= 0x54,
 };
 
+static const struct renesas_soc soc_rcar_v3h __initconst __maybe_unused = {
+	.family	= &fam_rcar_gen3,
+	.id	= 0x56,
+};
+
 static const struct renesas_soc soc_rcar_d3 __initconst __maybe_unused = {
 	.family	= &fam_rcar_gen3,
 	.id	= 0x58,
@@ -209,9 +219,15 @@ static const struct of_device_id renesas_socs[] __initconst = {
 #ifdef CONFIG_ARCH_R8A7796
 	{ .compatible = "renesas,r8a7796",	.data = &soc_rcar_m3_w },
 #endif
+#ifdef CONFIG_ARCH_R8A77965
+	{ .compatible = "renesas,r8a77965",	.data = &soc_rcar_m3_n },
+#endif
 #ifdef CONFIG_ARCH_R8A77970
 	{ .compatible = "renesas,r8a77970",	.data = &soc_rcar_v3m },
 #endif
+#ifdef CONFIG_ARCH_R8A77980
+	{ .compatible = "renesas,r8a77980",	.data = &soc_rcar_v3h },
+#endif
 #ifdef CONFIG_ARCH_R8A77995
 	{ .compatible = "renesas,r8a77995",	.data = &soc_rcar_d3 },
 #endif
diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig
index 39e152abe6b9..92770d84a288 100644
--- a/drivers/soc/ti/Kconfig
+++ b/drivers/soc/ti/Kconfig
@@ -28,6 +28,15 @@ config KEYSTONE_NAVIGATOR_DMA
 
 	  If unsure, say N.
 
+config AMX3_PM
+	tristate "AMx3 Power Management"
+	depends on SOC_AM33XX || SOC_AM43XX
+	depends on WKUP_M3_IPC && TI_EMIF_SRAM && SRAM
+	help
+	  Enable power management on AM335x and AM437x. Required for suspend to mem
+	  and standby states on both AM335x and AM437x platforms and for deeper cpuidle
+	  c-states on AM335x.
+
 config WKUP_M3_IPC
 	tristate "TI AMx3 Wkup-M3 IPC Driver"
 	depends on WKUP_M3_RPROC
diff --git a/drivers/soc/ti/Makefile b/drivers/soc/ti/Makefile
index 8e205287f120..a22edc0b258a 100644
--- a/drivers/soc/ti/Makefile
+++ b/drivers/soc/ti/Makefile
@@ -5,5 +5,6 @@
 obj-$(CONFIG_KEYSTONE_NAVIGATOR_QMSS)	+= knav_qmss.o
 knav_qmss-y := knav_qmss_queue.o knav_qmss_acc.o
 obj-$(CONFIG_KEYSTONE_NAVIGATOR_DMA)	+= knav_dma.o
+obj-$(CONFIG_AMX3_PM)			+= pm33xx.o
 obj-$(CONFIG_WKUP_M3_IPC)		+= wkup_m3_ipc.o
 obj-$(CONFIG_TI_SCI_PM_DOMAINS)		+= ti_sci_pm_domains.o
diff --git a/drivers/soc/ti/pm33xx.c b/drivers/soc/ti/pm33xx.c
new file mode 100644
index 000000000000..652739c7f718
--- /dev/null
+++ b/drivers/soc/ti/pm33xx.c
@@ -0,0 +1,349 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AM33XX Power Management Routines
+ *
+ * Copyright (C) 2012-2018 Texas Instruments Incorporated - http://www.ti.com/
+ *	Vaibhav Bedia, Dave Gerlach
+ */
+
+#include <linux/cpu.h>
+#include <linux/err.h>
+#include <linux/genalloc.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_data/pm33xx.h>
+#include <linux/platform_device.h>
+#include <linux/sizes.h>
+#include <linux/sram.h>
+#include <linux/suspend.h>
+#include <linux/ti-emif-sram.h>
+#include <linux/wkup_m3_ipc.h>
+
+#include <asm/proc-fns.h>
+#include <asm/suspend.h>
+#include <asm/system_misc.h>
+
+#define AMX3_PM_SRAM_SYMBOL_OFFSET(sym) ((unsigned long)(sym) - \
+					 (unsigned long)pm_sram->do_wfi)
+
+static int (*am33xx_do_wfi_sram)(unsigned long unused);
+static phys_addr_t am33xx_do_wfi_sram_phys;
+
+static struct gen_pool *sram_pool, *sram_pool_data;
+static unsigned long ocmcram_location, ocmcram_location_data;
+
+static struct am33xx_pm_platform_data *pm_ops;
+static struct am33xx_pm_sram_addr *pm_sram;
+
+static struct device *pm33xx_dev;
+static struct wkup_m3_ipc *m3_ipc;
+
+static u32 sram_suspend_address(unsigned long addr)
+{
+	return ((unsigned long)am33xx_do_wfi_sram +
+		AMX3_PM_SRAM_SYMBOL_OFFSET(addr));
+}
+
+#ifdef CONFIG_SUSPEND
+static int am33xx_pm_suspend(suspend_state_t suspend_state)
+{
+	int i, ret = 0;
+
+	ret = pm_ops->soc_suspend((unsigned long)suspend_state,
+				  am33xx_do_wfi_sram);
+
+	if (ret) {
+		dev_err(pm33xx_dev, "PM: Kernel suspend failure\n");
+	} else {
+		i = m3_ipc->ops->request_pm_status(m3_ipc);
+
+		switch (i) {
+		case 0:
+			dev_info(pm33xx_dev,
+				 "PM: Successfully put all powerdomains to target state\n");
+			break;
+		case 1:
+			dev_err(pm33xx_dev,
+				"PM: Could not transition all powerdomains to target state\n");
+			ret = -1;
+			break;
+		default:
+			dev_err(pm33xx_dev,
+				"PM: CM3 returned unknown result = %d\n", i);
+			ret = -1;
+		}
+	}
+
+	return ret;
+}
+
+static int am33xx_pm_enter(suspend_state_t suspend_state)
+{
+	int ret = 0;
+
+	switch (suspend_state) {
+	case PM_SUSPEND_MEM:
+	case PM_SUSPEND_STANDBY:
+		ret = am33xx_pm_suspend(suspend_state);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int am33xx_pm_begin(suspend_state_t state)
+{
+	int ret = -EINVAL;
+
+	switch (state) {
+	case PM_SUSPEND_MEM:
+		ret = m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_DEEPSLEEP);
+		break;
+	case PM_SUSPEND_STANDBY:
+		ret = m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_STANDBY);
+		break;
+	}
+
+	return ret;
+}
+
+static void am33xx_pm_end(void)
+{
+	m3_ipc->ops->finish_low_power(m3_ipc);
+}
+
+static int am33xx_pm_valid(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static const struct platform_suspend_ops am33xx_pm_ops = {
+	.begin		= am33xx_pm_begin,
+	.end		= am33xx_pm_end,
+	.enter		= am33xx_pm_enter,
+	.valid		= am33xx_pm_valid,
+};
+#endif /* CONFIG_SUSPEND */
+
+static void am33xx_pm_set_ipc_ops(void)
+{
+	u32 resume_address;
+	int temp;
+
+	temp = ti_emif_get_mem_type();
+	if (temp < 0) {
+		dev_err(pm33xx_dev, "PM: Cannot determine memory type, no PM available\n");
+		return;
+	}
+	m3_ipc->ops->set_mem_type(m3_ipc, temp);
+
+	/* Physical resume address to be used by ROM code */
+	resume_address = am33xx_do_wfi_sram_phys +
+			 *pm_sram->resume_offset + 0x4;
+
+	m3_ipc->ops->set_resume_address(m3_ipc, (void *)resume_address);
+}
+
+static void am33xx_pm_free_sram(void)
+{
+	gen_pool_free(sram_pool, ocmcram_location, *pm_sram->do_wfi_sz);
+	gen_pool_free(sram_pool_data, ocmcram_location_data,
+		      sizeof(struct am33xx_pm_ro_sram_data));
+}
+
+/*
+ * Push the minimal suspend-resume code to SRAM
+ */
+static int am33xx_pm_alloc_sram(void)
+{
+	struct device_node *np;
+	int ret = 0;
+
+	np = of_find_compatible_node(NULL, NULL, "ti,omap3-mpu");
+	if (!np) {
+		np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu");
+		if (!np) {
+			dev_err(pm33xx_dev, "PM: %s: Unable to find device node for mpu\n",
+				__func__);
+			return -ENODEV;
+		}
+	}
+
+	sram_pool = of_gen_pool_get(np, "pm-sram", 0);
+	if (!sram_pool) {
+		dev_err(pm33xx_dev, "PM: %s: Unable to get sram pool for ocmcram\n",
+			__func__);
+		ret = -ENODEV;
+		goto mpu_put_node;
+	}
+
+	sram_pool_data = of_gen_pool_get(np, "pm-sram", 1);
+	if (!sram_pool_data) {
+		dev_err(pm33xx_dev, "PM: %s: Unable to get sram data pool for ocmcram\n",
+			__func__);
+		ret = -ENODEV;
+		goto mpu_put_node;
+	}
+
+	ocmcram_location = gen_pool_alloc(sram_pool, *pm_sram->do_wfi_sz);
+	if (!ocmcram_location) {
+		dev_err(pm33xx_dev, "PM: %s: Unable to allocate memory from ocmcram\n",
+			__func__);
+		ret = -ENOMEM;
+		goto mpu_put_node;
+	}
+
+	ocmcram_location_data = gen_pool_alloc(sram_pool_data,
+					       sizeof(struct emif_regs_amx3));
+	if (!ocmcram_location_data) {
+		dev_err(pm33xx_dev, "PM: Unable to allocate memory from ocmcram\n");
+		gen_pool_free(sram_pool, ocmcram_location, *pm_sram->do_wfi_sz);
+		ret = -ENOMEM;
+	}
+
+mpu_put_node:
+	of_node_put(np);
+	return ret;
+}
+
+static int am33xx_push_sram_idle(void)
+{
+	struct am33xx_pm_ro_sram_data ro_sram_data;
+	int ret;
+	u32 table_addr, ro_data_addr;
+	void *copy_addr;
+
+	ro_sram_data.amx3_pm_sram_data_virt = ocmcram_location_data;
+	ro_sram_data.amx3_pm_sram_data_phys =
+		gen_pool_virt_to_phys(sram_pool_data, ocmcram_location_data);
+
+	/* Save physical address to calculate resume offset during pm init */
+	am33xx_do_wfi_sram_phys = gen_pool_virt_to_phys(sram_pool,
+							ocmcram_location);
+
+	am33xx_do_wfi_sram = sram_exec_copy(sram_pool, (void *)ocmcram_location,
+					    pm_sram->do_wfi,
+					    *pm_sram->do_wfi_sz);
+	if (!am33xx_do_wfi_sram) {
+		dev_err(pm33xx_dev,
+			"PM: %s: am33xx_do_wfi copy to sram failed\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	table_addr =
+		sram_suspend_address((unsigned long)pm_sram->emif_sram_table);
+	ret = ti_emif_copy_pm_function_table(sram_pool, (void *)table_addr);
+	if (ret) {
+		dev_dbg(pm33xx_dev,
+			"PM: %s: EMIF function copy failed\n", __func__);
+		return -EPROBE_DEFER;
+	}
+
+	ro_data_addr =
+		sram_suspend_address((unsigned long)pm_sram->ro_sram_data);
+	copy_addr = sram_exec_copy(sram_pool, (void *)ro_data_addr,
+				   &ro_sram_data,
+				   sizeof(ro_sram_data));
+	if (!copy_addr) {
+		dev_err(pm33xx_dev,
+			"PM: %s: ro_sram_data copy to sram failed\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int am33xx_pm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	if (!of_machine_is_compatible("ti,am33xx") &&
+	    !of_machine_is_compatible("ti,am43"))
+		return -ENODEV;
+
+	pm_ops = dev->platform_data;
+	if (!pm_ops) {
+		dev_err(dev, "PM: Cannot get core PM ops!\n");
+		return -ENODEV;
+	}
+
+	pm_sram = pm_ops->get_sram_addrs();
+	if (!pm_sram) {
+		dev_err(dev, "PM: Cannot get PM asm function addresses!!\n");
+		return -ENODEV;
+	}
+
+	pm33xx_dev = dev;
+
+	ret = am33xx_pm_alloc_sram();
+	if (ret)
+		return ret;
+
+	ret = am33xx_push_sram_idle();
+	if (ret)
+		goto err_free_sram;
+
+	m3_ipc = wkup_m3_ipc_get();
+	if (!m3_ipc) {
+		dev_dbg(dev, "PM: Cannot get wkup_m3_ipc handle\n");
+		ret = -EPROBE_DEFER;
+		goto err_free_sram;
+	}
+
+	am33xx_pm_set_ipc_ops();
+
+#ifdef CONFIG_SUSPEND
+	suspend_set_ops(&am33xx_pm_ops);
+#endif /* CONFIG_SUSPEND */
+
+	ret = pm_ops->init();
+	if (ret) {
+		dev_err(dev, "Unable to call core pm init!\n");
+		ret = -ENODEV;
+		goto err_put_wkup_m3_ipc;
+	}
+
+	return 0;
+
+err_put_wkup_m3_ipc:
+	wkup_m3_ipc_put(m3_ipc);
+err_free_sram:
+	am33xx_pm_free_sram();
+	pm33xx_dev = NULL;
+	return ret;
+}
+
+static int am33xx_pm_remove(struct platform_device *pdev)
+{
+	suspend_set_ops(NULL);
+	wkup_m3_ipc_put(m3_ipc);
+	am33xx_pm_free_sram();
+	return 0;
+}
+
+static struct platform_driver am33xx_pm_driver = {
+	.driver = {
+		.name   = "pm33xx",
+	},
+	.probe = am33xx_pm_probe,
+	.remove = am33xx_pm_remove,
+};
+module_platform_driver(am33xx_pm_driver);
+
+MODULE_ALIAS("platform:pm33xx");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("am33xx power management driver");
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/include/clocksource/timer-ti-dm.h
index dd79f3005cdf..7d9598dc578d 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/include/clocksource/timer-ti-dm.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/plat-omap/include/plat/dmtimer.h
- *
  * OMAP Dual-Mode Timers
  *
  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
@@ -36,8 +34,8 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
-#ifndef __ASM_ARCH_DMTIMER_H
-#define __ASM_ARCH_DMTIMER_H
+#ifndef __CLOCKSOURCE_DMTIMER_H
+#define __CLOCKSOURCE_DMTIMER_H
 
 /* clock sources */
 #define OMAP_TIMER_SRC_SYS_CLK			0x00
@@ -75,10 +73,6 @@
  */
 #define OMAP_TIMER_ERRATA_I103_I767			0x80000000
 
-struct omap_timer_capability_dev_attr {
-	u32 timer_capability;
-};
-
 struct timer_regs {
 	u32 tidr;
 	u32 tier;
@@ -125,37 +119,13 @@ struct omap_dm_timer {
 };
 
 int omap_dm_timer_reserve_systimer(int id);
-struct omap_dm_timer *omap_dm_timer_request(void);
-struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
 struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap);
-struct omap_dm_timer *omap_dm_timer_request_by_node(struct device_node *np);
-int omap_dm_timer_free(struct omap_dm_timer *timer);
-void omap_dm_timer_enable(struct omap_dm_timer *timer);
-void omap_dm_timer_disable(struct omap_dm_timer *timer);
 
 int omap_dm_timer_get_irq(struct omap_dm_timer *timer);
 
 u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
-struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer);
 
 int omap_dm_timer_trigger(struct omap_dm_timer *timer);
-int omap_dm_timer_start(struct omap_dm_timer *timer);
-int omap_dm_timer_stop(struct omap_dm_timer *timer);
-
-int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
-int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
-int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
-int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
-int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
-int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
-
-int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
-int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask);
-
-unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
-int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
-unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer);
-int omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value);
 
 int omap_dm_timers_active(void);
 
@@ -276,6 +246,12 @@ int omap_dm_timers_active(void);
 #define OMAP_TIMER_TICK_INT_MASK_COUNT_REG				\
 		(_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
 
+/*
+ * The below are inlined to optimize code size for system timers. Other code
+ * should not need these at all, see
+ * include/linux/platform_data/pwm_omap_dmtimer.h
+ */
+#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2PLUS)
 static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
 						int posted)
 {
@@ -414,5 +390,5 @@ static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
 {
 	writel_relaxed(value, timer->irq_stat);
 }
-
-#endif /* __ASM_ARCH_DMTIMER_H */
+#endif /* CONFIG_ARCH_OMAP1 || CONFIG_ARCH_OMAP2PLUS */
+#endif /* __CLOCKSOURCE_DMTIMER_H */
diff --git a/include/dt-bindings/power/r8a77965-sysc.h b/include/dt-bindings/power/r8a77965-sysc.h
new file mode 100644
index 000000000000..05a4b5917314
--- /dev/null
+++ b/include/dt-bindings/power/r8a77965-sysc.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ * Copyright (C) 2016 Glider bvba
+ */
+
+#ifndef __DT_BINDINGS_POWER_R8A77965_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A77965_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A77965_PD_CA57_CPU0		 0
+#define R8A77965_PD_CA57_CPU1		 1
+#define R8A77965_PD_A3VP		 9
+#define R8A77965_PD_CA57_SCU		12
+#define R8A77965_PD_CR7			13
+#define R8A77965_PD_A3VC		14
+#define R8A77965_PD_3DG_A		17
+#define R8A77965_PD_3DG_B		18
+#define R8A77965_PD_A3IR		24
+#define R8A77965_PD_A2VC1		26
+
+/* Always-on power area */
+#define R8A77965_PD_ALWAYS_ON		32
+
+#endif /* __DT_BINDINGS_POWER_R8A77965_SYSC_H__ */
diff --git a/include/dt-bindings/power/r8a77980-sysc.h b/include/dt-bindings/power/r8a77980-sysc.h
new file mode 100644
index 000000000000..2c90c1237725
--- /dev/null
+++ b/include/dt-bindings/power/r8a77980-sysc.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+#ifndef __DT_BINDINGS_POWER_R8A77980_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A77980_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A77980_PD_A2SC2		0
+#define R8A77980_PD_A2SC3		1
+#define R8A77980_PD_A2SC4		2
+#define R8A77980_PD_A2PD0		3
+#define R8A77980_PD_A2PD1		4
+#define R8A77980_PD_CA53_CPU0		5
+#define R8A77980_PD_CA53_CPU1		6
+#define R8A77980_PD_CA53_CPU2		7
+#define R8A77980_PD_CA53_CPU3		8
+#define R8A77980_PD_A2CN		10
+#define R8A77980_PD_A3VIP		11
+#define R8A77980_PD_A2IR5		12
+#define R8A77980_PD_CR7			13
+#define R8A77980_PD_A2IR4		15
+#define R8A77980_PD_CA53_SCU		21
+#define R8A77980_PD_A2IR0		23
+#define R8A77980_PD_A3IR		24
+#define R8A77980_PD_A3VIP1		25
+#define R8A77980_PD_A3VIP2		26
+#define R8A77980_PD_A2IR1		27
+#define R8A77980_PD_A2IR2		28
+#define R8A77980_PD_A2IR3		29
+#define R8A77980_PD_A2SC0		30
+#define R8A77980_PD_A2SC1		31
+
+/* Always-on power area */
+#define R8A77980_PD_ALWAYS_ON		32
+
+#endif /* __DT_BINDINGS_POWER_R8A77980_SYSC_H__ */
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index d18da839b810..7e3bceee3489 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -203,6 +203,7 @@ enum {
 	TI_CLKM_PRM,
 	TI_CLKM_SCRM,
 	TI_CLKM_CTRL,
+	TI_CLKM_CTRL_AUX,
 	TI_CLKM_PLLSS,
 	CLK_MAX_MEMMAPS
 };
diff --git a/include/linux/platform_data/asoc-ti-mcbsp.h b/include/linux/platform_data/asoc-ti-mcbsp.h
index e684543254f3..e319d0a2ec82 100644
--- a/include/linux/platform_data/asoc-ti-mcbsp.h
+++ b/include/linux/platform_data/asoc-ti-mcbsp.h
@@ -25,10 +25,6 @@
 #include <linux/spinlock.h>
 #include <linux/clk.h>
 
-#define MCBSP_CONFIG_TYPE2	0x2
-#define MCBSP_CONFIG_TYPE3	0x3
-#define MCBSP_CONFIG_TYPE4	0x4
-
 /* Platform specific configuration */
 struct omap_mcbsp_ops {
 	void (*request)(unsigned int);
@@ -47,14 +43,6 @@ struct omap_mcbsp_platform_data {
 	int (*force_ick_on)(struct clk *clk, bool force_on);
 };
 
-/**
- * omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod
- * @sidetone: name of the sidetone device
- */
-struct omap_mcbsp_dev_attr {
-	const char *sidetone;
-};
-
 void omap3_mcbsp_init_pdata_callback(struct omap_mcbsp_platform_data *pdata);
 
 #endif
diff --git a/include/linux/platform_data/dmtimer-omap.h b/include/linux/platform_data/dmtimer-omap.h
index a19b78d826e9..757a0f9e26f9 100644
--- a/include/linux/platform_data/dmtimer-omap.h
+++ b/include/linux/platform_data/dmtimer-omap.h
@@ -20,12 +20,50 @@
 #ifndef __PLATFORM_DATA_DMTIMER_OMAP_H__
 #define __PLATFORM_DATA_DMTIMER_OMAP_H__
 
+struct omap_dm_timer_ops {
+	struct omap_dm_timer *(*request_by_node)(struct device_node *np);
+	struct omap_dm_timer *(*request_specific)(int timer_id);
+	struct omap_dm_timer *(*request)(void);
+
+	int	(*free)(struct omap_dm_timer *timer);
+
+	void	(*enable)(struct omap_dm_timer *timer);
+	void	(*disable)(struct omap_dm_timer *timer);
+
+	int	(*get_irq)(struct omap_dm_timer *timer);
+	int	(*set_int_enable)(struct omap_dm_timer *timer,
+				  unsigned int value);
+	int	(*set_int_disable)(struct omap_dm_timer *timer, u32 mask);
+
+	struct clk *(*get_fclk)(struct omap_dm_timer *timer);
+
+	int	(*start)(struct omap_dm_timer *timer);
+	int	(*stop)(struct omap_dm_timer *timer);
+	int	(*set_source)(struct omap_dm_timer *timer, int source);
+
+	int	(*set_load)(struct omap_dm_timer *timer, int autoreload,
+			    unsigned int value);
+	int	(*set_match)(struct omap_dm_timer *timer, int enable,
+			     unsigned int match);
+	int	(*set_pwm)(struct omap_dm_timer *timer, int def_on,
+			   int toggle, int trigger);
+	int	(*set_prescaler)(struct omap_dm_timer *timer, int prescaler);
+
+	unsigned int (*read_counter)(struct omap_dm_timer *timer);
+	int	(*write_counter)(struct omap_dm_timer *timer,
+				 unsigned int value);
+	unsigned int (*read_status)(struct omap_dm_timer *timer);
+	int	(*write_status)(struct omap_dm_timer *timer,
+				unsigned int value);
+};
+
 struct dmtimer_platform_data {
 	/* set_timer_src - Only used for OMAP1 devices */
 	int (*set_timer_src)(struct platform_device *pdev, int source);
 	u32 timer_capability;
 	u32 timer_errata;
 	int (*get_context_loss_count)(struct device *);
+	const struct omap_dm_timer_ops *timer_ops;
 };
 
 #endif /* __PLATFORM_DATA_DMTIMER_OMAP_H__ */
diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h
index cb2618147c34..8612855691b2 100644
--- a/include/linux/platform_data/gpio-omap.h
+++ b/include/linux/platform_data/gpio-omap.h
@@ -157,11 +157,6 @@
 #define OMAP_MPUIO(nr)		(OMAP_MAX_GPIO_LINES + (nr))
 #define OMAP_GPIO_IS_MPUIO(nr)	((nr) >= OMAP_MAX_GPIO_LINES)
 
-struct omap_gpio_dev_attr {
-	int bank_width;		/* GPIO bank width */
-	bool dbck_flag;		/* dbck required or not - True for OMAP3&4 */
-};
-
 struct omap_gpio_reg_offs {
 	u16 revision;
 	u16 direction;
diff --git a/include/linux/platform_data/mtd-nand-pxa3xx.h b/include/linux/platform_data/mtd-nand-pxa3xx.h
index b42ad83cbc20..4fd0f592a2d2 100644
--- a/include/linux/platform_data/mtd-nand-pxa3xx.h
+++ b/include/linux/platform_data/mtd-nand-pxa3xx.h
@@ -6,41 +6,22 @@
 #include <linux/mtd/partitions.h>
 
 /*
- * Current pxa3xx_nand controller has two chip select which
- * both be workable.
- *
- * Notice should be taken that:
- * When you want to use this feature, you should not enable the
- * keep configuration feature, for two chip select could be
- * attached with different nand chip. The different page size
- * and timing requirement make the keep configuration impossible.
+ * Current pxa3xx_nand controller has two chip select which both be workable but
+ * historically all platforms remaining on platform data used only one. Switch
+ * to device tree if you need more.
  */
-
-/* The max num of chip select current support */
-#define NUM_CHIP_SELECT		(2)
 struct pxa3xx_nand_platform_data {
-
-	/* the data flash bus is shared between the Static Memory
-	 * Controller and the Data Flash Controller,  the arbiter
-	 * controls the ownership of the bus
-	 */
-	int	enable_arbiter;
-
-	/* allow platform code to keep OBM/bootloader defined NFC config */
-	int	keep_config;
-
-	/* indicate how many chip selects will be used */
-	int	num_cs;
-
-	/* use an flash-based bad block table */
-	bool	flash_bbt;
-
-	/* requested ECC strength and ECC step size */
+	/* Keep OBM/bootloader NFC timing configuration */
+	bool keep_config;
+	/* Use a flash-based bad block table */
+	bool flash_bbt;
+	/* Requested ECC strength and ECC step size */
 	int ecc_strength, ecc_step_size;
-
-	const struct mtd_partition		*parts[NUM_CHIP_SELECT];
-	unsigned int				nr_parts[NUM_CHIP_SELECT];
+	/* Partitions */
+	const struct mtd_partition *parts;
+	unsigned int nr_parts;
 };
 
 extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info);
+
 #endif /* __ASM_ARCH_PXA3XX_NAND_H */
diff --git a/include/linux/platform_data/phy-da8xx-usb.h b/include/linux/platform_data/phy-da8xx-usb.h
new file mode 100644
index 000000000000..85c2b99381b2
--- /dev/null
+++ b/include/linux/platform_data/phy-da8xx-usb.h
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * phy-da8xx-usb - TI DaVinci DA8xx USB PHY driver
+ *
+ * Copyright (C) 2018 David Lechner <david@lechnology.com>
+ */
+
+#ifndef __LINUX_PLATFORM_DATA_PHY_DA8XX_USB_H__
+#define __LINUX_PLATFORM_DATA_PHY_DA8XX_USB_H__
+
+#include <linux/regmap.h>
+
+/**
+ * da8xx_usb_phy_platform_data
+ * @cfgchip: CFGCHIP syscon regmap
+ */
+struct da8xx_usb_phy_platform_data {
+	struct regmap *cfgchip;
+};
+
+#endif /* __LINUX_PLATFORM_DATA_PHY_DA8XX_USB_H__ */
diff --git a/include/linux/platform_data/pm33xx.h b/include/linux/platform_data/pm33xx.h
new file mode 100644
index 000000000000..f9bed2a0af9d
--- /dev/null
+++ b/include/linux/platform_data/pm33xx.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * TI pm33xx platform data
+ *
+ * Copyright (C) 2016-2018 Texas Instruments, Inc.
+ *	Dave Gerlach <d-gerlach@ti.com>
+ */
+
+#ifndef _LINUX_PLATFORM_DATA_PM33XX_H
+#define _LINUX_PLATFORM_DATA_PM33XX_H
+
+#include <linux/kbuild.h>
+#include <linux/types.h>
+
+#ifndef __ASSEMBLER__
+struct am33xx_pm_sram_addr {
+	void (*do_wfi)(void);
+	unsigned long *do_wfi_sz;
+	unsigned long *resume_offset;
+	unsigned long *emif_sram_table;
+	unsigned long *ro_sram_data;
+};
+
+struct am33xx_pm_platform_data {
+	int	(*init)(void);
+	int	(*soc_suspend)(unsigned int state, int (*fn)(unsigned long));
+	struct  am33xx_pm_sram_addr *(*get_sram_addrs)(void);
+};
+
+struct am33xx_pm_sram_data {
+	u32 wfi_flags;
+	u32 l2_aux_ctrl_val;
+	u32 l2_prefetch_ctrl_val;
+} __packed __aligned(8);
+
+struct am33xx_pm_ro_sram_data {
+	u32 amx3_pm_sram_data_virt;
+	u32 amx3_pm_sram_data_phys;
+} __packed __aligned(8);
+
+#endif /* __ASSEMBLER__ */
+#endif /* _LINUX_PLATFORM_DATA_PM33XX_H */
diff --git a/include/linux/platform_data/spi-omap2-mcspi.h b/include/linux/platform_data/spi-omap2-mcspi.h
index 13c83a25958a..0bf9fddb8306 100644
--- a/include/linux/platform_data/spi-omap2-mcspi.h
+++ b/include/linux/platform_data/spi-omap2-mcspi.h
@@ -2,10 +2,6 @@
 #ifndef _OMAP2_MCSPI_H
 #define _OMAP2_MCSPI_H
 
-#define OMAP2_MCSPI_REV 0
-#define OMAP3_MCSPI_REV 1
-#define OMAP4_MCSPI_REV 2
-
 #define OMAP4_MCSPI_REG_OFFSET 0x100
 
 #define MCSPI_PINDIR_D0_IN_D1_OUT	0
@@ -17,10 +13,6 @@ struct omap2_mcspi_platform_config {
 	unsigned int pin_dir:1;
 };
 
-struct omap2_mcspi_dev_attr {
-	unsigned short num_chipselect;
-};
-
 struct omap2_mcspi_device_config {
 	unsigned turbo_mode:1;
 
diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h
index 1be356330b96..80ce28d40832 100644
--- a/include/linux/platform_data/ti-sysc.h
+++ b/include/linux/platform_data/ti-sysc.h
@@ -16,6 +16,10 @@ enum ti_sysc_module_type {
 	TI_SYSC_OMAP4_USB_HOST_FS,
 };
 
+struct ti_sysc_cookie {
+	void *data;
+};
+
 /**
  * struct sysc_regbits - TI OCP_SYSCONFIG register field offsets
  * @midle_shift: Offset of the midle bit
@@ -41,6 +45,7 @@ struct sysc_regbits {
 	s8 emufree_shift;
 };
 
+#define SYSC_QUIRK_LEGACY_IDLE		BIT(8)
 #define SYSC_QUIRK_RESET_STATUS		BIT(7)
 #define SYSC_QUIRK_NO_IDLE_ON_INIT	BIT(6)
 #define SYSC_QUIRK_NO_RESET_ON_INIT	BIT(5)
@@ -83,4 +88,49 @@ struct sysc_config {
 	u32 quirks;
 };
 
+enum sysc_registers {
+	SYSC_REVISION,
+	SYSC_SYSCONFIG,
+	SYSC_SYSSTATUS,
+	SYSC_MAX_REGS,
+};
+
+/**
+ * struct ti_sysc_module_data - ti-sysc to hwmod translation data for a module
+ * @name: legacy "ti,hwmods" module name
+ * @module_pa: physical address of the interconnect target module
+ * @module_size: size of the interconnect target module
+ * @offsets: array of register offsets as listed in enum sysc_registers
+ * @nr_offsets: number of registers
+ * @cap: interconnect target module capabilities
+ * @cfg: interconnect target module configuration
+ *
+ * This data is enough to allocate a new struct omap_hwmod_class_sysconfig
+ * based on device tree data parsed by ti-sysc driver.
+ */
+struct ti_sysc_module_data {
+	const char *name;
+	u64 module_pa;
+	u32 module_size;
+	int *offsets;
+	int nr_offsets;
+	const struct sysc_capabilities *cap;
+	struct sysc_config *cfg;
+};
+
+struct device;
+
+struct ti_sysc_platform_data {
+	struct of_dev_auxdata *auxdata;
+	int (*init_module)(struct device *dev,
+			   const struct ti_sysc_module_data *data,
+			   struct ti_sysc_cookie *cookie);
+	int (*enable_module)(struct device *dev,
+			     const struct ti_sysc_cookie *cookie);
+	int (*idle_module)(struct device *dev,
+			   const struct ti_sysc_cookie *cookie);
+	int (*shutdown_module)(struct device *dev,
+			       const struct ti_sysc_cookie *cookie);
+};
+
 #endif	/* __TI_SYSC_DATA_H__ */
diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h
index d8b187c3925d..7b81dad712de 100644
--- a/include/linux/power/smartreflex.h
+++ b/include/linux/power/smartreflex.h
@@ -143,6 +143,13 @@
 #define OMAP3430_SR_ERRWEIGHT		0x04
 #define OMAP3430_SR_ERRMAXLIMIT		0x02
 
+enum sr_instance {
+	OMAP_SR_MPU,			/* shared with iva on omap3 */
+	OMAP_SR_CORE,
+	OMAP_SR_IVA,
+	OMAP_SR_NR,
+};
+
 struct omap_sr {
 	char				*name;
 	struct list_head		node;
@@ -207,7 +214,6 @@ struct omap_smartreflex_dev_attr {
 	const char      *sensor_voltdm_name;
 };
 
-#ifdef CONFIG_POWER_AVS_OMAP
 /*
  * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR.
  * The smartreflex class driver should pass the class type.
@@ -290,6 +296,8 @@ struct omap_sr_data {
 	struct voltagedomain		*voltdm;
 };
 
+#ifdef CONFIG_POWER_AVS_OMAP
+
 /* Smartreflex module enable/disable interface */
 void omap_sr_enable(struct voltagedomain *voltdm);
 void omap_sr_disable(struct voltagedomain *voltdm);
diff --git a/include/linux/serial_s3c.h b/include/linux/serial_s3c.h
index a7f004a3c177..463ed28d2b27 100644
--- a/include/linux/serial_s3c.h
+++ b/include/linux/serial_s3c.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  *  Internal header file for Samsung S3C2410 serial ports (UART0-2)
  *
@@ -10,21 +11,7 @@
  *  Internal header file for MX1ADS serial ports (UART1 & 2)
  *
  *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
+ */
 
 #ifndef __ASM_ARM_REGS_SERIAL_H
 #define __ASM_ARM_REGS_SERIAL_H
author	Linus Torvalds <torvalds@linux-foundation.org>	2018-04-06 06:21:08 +0200
committer	Linus Torvalds <torvalds@linux-foundation.org>	2018-04-06 06:21:08 +0200
commit	167569343fac74ec6825a3ab982f795b5880e63e (patch)
tree	965adb59fbe10d9f45a7fb90cb1ec1bc18d4613c
parent	Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/ar... (diff)
parent	arm: npcm: modify configuration for the NPCM7xx BMC. (diff)
download	linux-167569343fac74ec6825a3ab982f795b5880e63e.tar.xz linux-167569343fac74ec6825a3ab982f795b5880e63e.zip