x86: Remove pr_fmt duplicate logging prefixes

Converting pr_fmt from a default simple #define to use KBUILD_MODNAME
added some duplicate prefixes.

Remove the duplicate prefixes.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/e7b709a2b040af7faa81b0aa2c3a125aed628a82.1525964383.git.joe@perches.com

5 files changed, 33 insertions, 32 deletions

diff --git a/arch/x86/events/amd/ibs.c b/arch/x86/events/amd/ibs.c
index 786fd875de92..4b98101209a1 100644
--- a/arch/x86/events/amd/ibs.c
+++ b/arch/x86/events/amd/ibs.c
@@ -889,7 +889,7 @@ static void force_ibs_eilvt_setup(void)
 	if (!ibs_eilvt_valid())
 		goto out;
 
-	pr_info("IBS: LVT offset %d assigned\n", offset);
+	pr_info("LVT offset %d assigned\n", offset);
 
 	return;
 out:
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 6a2cb1442e05..d1f25c831447 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -155,7 +155,8 @@ static void __init __e820__range_add(struct e820_table *table, u64 start, u64 si
 	int x = table->nr_entries;
 
 	if (x >= ARRAY_SIZE(table->entries)) {
-		pr_err("e820: too many entries; ignoring [mem %#010llx-%#010llx]\n", start, start + size - 1);
+		pr_err("too many entries; ignoring [mem %#010llx-%#010llx]\n",
+		       start, start + size - 1);
 		return;
 	}
 
@@ -190,9 +191,10 @@ void __init e820__print_table(char *who)
 	int i;
 
 	for (i = 0; i < e820_table->nr_entries; i++) {
-		pr_info("%s: [mem %#018Lx-%#018Lx] ", who,
-		       e820_table->entries[i].addr,
-		       e820_table->entries[i].addr + e820_table->entries[i].size - 1);
+		pr_info("%s: [mem %#018Lx-%#018Lx] ",
+			who,
+			e820_table->entries[i].addr,
+			e820_table->entries[i].addr + e820_table->entries[i].size - 1);
 
 		e820_print_type(e820_table->entries[i].type);
 		pr_cont("\n");
@@ -574,7 +576,7 @@ void __init e820__update_table_print(void)
 	if (e820__update_table(e820_table))
 		return;
 
-	pr_info("e820: modified physical RAM map:\n");
+	pr_info("modified physical RAM map:\n");
 	e820__print_table("modified");
 }
 
@@ -636,9 +638,8 @@ __init void e820__setup_pci_gap(void)
 	if (!found) {
 #ifdef CONFIG_X86_64
 		gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024;
-		pr_err(
-			"e820: Cannot find an available gap in the 32-bit address range\n"
-			"e820: PCI devices with unassigned 32-bit BARs may not work!\n");
+		pr_err("Cannot find an available gap in the 32-bit address range\n");
+		pr_err("PCI devices with unassigned 32-bit BARs may not work!\n");
 #else
 		gapstart = 0x10000000;
 #endif
@@ -649,7 +650,8 @@ __init void e820__setup_pci_gap(void)
 	 */
 	pci_mem_start = gapstart;
 
-	pr_info("e820: [mem %#010lx-%#010lx] available for PCI devices\n", gapstart, gapstart + gapsize - 1);
+	pr_info("[mem %#010lx-%#010lx] available for PCI devices\n",
+		gapstart, gapstart + gapsize - 1);
 }
 
 /*
@@ -711,7 +713,7 @@ void __init e820__memory_setup_extended(u64 phys_addr, u32 data_len)
 	memcpy(e820_table_firmware, e820_table, sizeof(*e820_table_firmware));
 
 	early_memunmap(sdata, data_len);
-	pr_info("e820: extended physical RAM map:\n");
+	pr_info("extended physical RAM map:\n");
 	e820__print_table("extended");
 }
 
@@ -780,7 +782,7 @@ u64 __init e820__memblock_alloc_reserved(u64 size, u64 align)
 	addr = __memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE);
 	if (addr) {
 		e820__range_update_kexec(addr, size, E820_TYPE_RAM, E820_TYPE_RESERVED);
-		pr_info("e820: update e820_table_kexec for e820__memblock_alloc_reserved()\n");
+		pr_info("update e820_table_kexec for e820__memblock_alloc_reserved()\n");
 		e820__update_table_kexec();
 	}
 
@@ -830,8 +832,8 @@ static unsigned long __init e820_end_pfn(unsigned long limit_pfn, enum e820_type
 	if (last_pfn > max_arch_pfn)
 		last_pfn = max_arch_pfn;
 
-	pr_info("e820: last_pfn = %#lx max_arch_pfn = %#lx\n",
-			 last_pfn, max_arch_pfn);
+	pr_info("last_pfn = %#lx max_arch_pfn = %#lx\n",
+		last_pfn, max_arch_pfn);
 	return last_pfn;
 }
 
@@ -1005,7 +1007,7 @@ void __init e820__finish_early_params(void)
 		if (e820__update_table(e820_table) < 0)
 			early_panic("Invalid user supplied memory map");
 
-		pr_info("e820: user-defined physical RAM map:\n");
+		pr_info("user-defined physical RAM map:\n");
 		e820__print_table("user");
 	}
 }
@@ -1238,7 +1240,7 @@ void __init e820__memory_setup(void)
 	memcpy(e820_table_kexec, e820_table, sizeof(*e820_table_kexec));
 	memcpy(e820_table_firmware, e820_table, sizeof(*e820_table_firmware));
 
-	pr_info("e820: BIOS-provided physical RAM map:\n");
+	pr_info("BIOS-provided physical RAM map:\n");
 	e820__print_table(who);
 }
 
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 8ce4212e2b8d..b6be34ee88e9 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -975,8 +975,7 @@ int __init hpet_enable(void)
 	cfg &= ~(HPET_CFG_ENABLE | HPET_CFG_LEGACY);
 	hpet_writel(cfg, HPET_CFG);
 	if (cfg)
-		pr_warn("HPET: Unrecognized bits %#x set in global cfg\n",
-			cfg);
+		pr_warn("Unrecognized bits %#x set in global cfg\n", cfg);
 
 	for (i = 0; i <= last; ++i) {
 		cfg = hpet_readl(HPET_Tn_CFG(i));
@@ -988,7 +987,7 @@ int __init hpet_enable(void)
 			 | HPET_TN_64BIT_CAP | HPET_TN_32BIT | HPET_TN_ROUTE
 			 | HPET_TN_FSB | HPET_TN_FSB_CAP);
 		if (cfg)
-			pr_warn("HPET: Unrecognized bits %#x set in cfg#%u\n",
+			pr_warn("Unrecognized bits %#x set in cfg#%u\n",
 				cfg, i);
 	}
 	hpet_print_config();
diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
index 85c7ef23d99f..d1c468741915 100644
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -1079,8 +1079,8 @@ arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr, struct pt_regs
 		return orig_ret_vaddr;
 
 	if (nleft != rasize) {
-		pr_err("uprobe: return address clobbered: pid=%d, %%sp=%#lx, "
-			"%%ip=%#lx\n", current->pid, regs->sp, regs->ip);
+		pr_err("return address clobbered: pid=%d, %%sp=%#lx, %%ip=%#lx\n",
+		       current->pid, regs->sp, regs->ip);
 
 		force_sig_info(SIGSEGV, SEND_SIG_FORCED, current);
 	}
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 25504d5aa816..fa150855647c 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -136,13 +136,13 @@ static int __init numa_add_memblk_to(int nid, u64 start, u64 end,
 
 	/* whine about and ignore invalid blks */
 	if (start > end || nid < 0 || nid >= MAX_NUMNODES) {
-		pr_warning("NUMA: Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n",
-			   nid, start, end - 1);
+		pr_warn("Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n",
+			nid, start, end - 1);
 		return 0;
 	}
 
 	if (mi->nr_blks >= NR_NODE_MEMBLKS) {
-		pr_err("NUMA: too many memblk ranges\n");
+		pr_err("too many memblk ranges\n");
 		return -EINVAL;
 	}
 
@@ -267,14 +267,14 @@ int __init numa_cleanup_meminfo(struct numa_meminfo *mi)
 			 */
 			if (bi->end > bj->start && bi->start < bj->end) {
 				if (bi->nid != bj->nid) {
-					pr_err("NUMA: node %d [mem %#010Lx-%#010Lx] overlaps with node %d [mem %#010Lx-%#010Lx]\n",
+					pr_err("node %d [mem %#010Lx-%#010Lx] overlaps with node %d [mem %#010Lx-%#010Lx]\n",
 					       bi->nid, bi->start, bi->end - 1,
 					       bj->nid, bj->start, bj->end - 1);
 					return -EINVAL;
 				}
-				pr_warning("NUMA: Warning: node %d [mem %#010Lx-%#010Lx] overlaps with itself [mem %#010Lx-%#010Lx]\n",
-					   bi->nid, bi->start, bi->end - 1,
-					   bj->start, bj->end - 1);
+				pr_warn("Warning: node %d [mem %#010Lx-%#010Lx] overlaps with itself [mem %#010Lx-%#010Lx]\n",
+					bi->nid, bi->start, bi->end - 1,
+					bj->start, bj->end - 1);
 			}
 
 			/*
@@ -364,7 +364,7 @@ static int __init numa_alloc_distance(void)
 	phys = memblock_find_in_range(0, PFN_PHYS(max_pfn_mapped),
 				      size, PAGE_SIZE);
 	if (!phys) {
-		pr_warning("NUMA: Warning: can't allocate distance table!\n");
+		pr_warn("Warning: can't allocate distance table!\n");
 		/* don't retry until explicitly reset */
 		numa_distance = (void *)1LU;
 		return -ENOMEM;
@@ -410,14 +410,14 @@ void __init numa_set_distance(int from, int to, int distance)
 
 	if (from >= numa_distance_cnt || to >= numa_distance_cnt ||
 			from < 0 || to < 0) {
-		pr_warn_once("NUMA: Warning: node ids are out of bound, from=%d to=%d distance=%d\n",
-			    from, to, distance);
+		pr_warn_once("Warning: node ids are out of bound, from=%d to=%d distance=%d\n",
+			     from, to, distance);
 		return;
 	}
 
 	if ((u8)distance != distance ||
 	    (from == to && distance != LOCAL_DISTANCE)) {
-		pr_warn_once("NUMA: Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
+		pr_warn_once("Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
 			     from, to, distance);
 		return;
 	}