diff options
| author | Marek Vasut <marex@denx.de> | 2024-06-23 21:51:56 +0200 |
|---|---|---|
| committer | Alexandre Torgue <alexandre.torgue@foss.st.com> | 2024-07-05 14:45:24 +0200 |
| commit | 1b02383c385b16b4b275e30a3dd5860c0fd95c4a (patch) | |
| tree | ec2f5f34db647fe50f71e4e1dfd44b9e7b0ba56a | |
| parent | ARM: dts: stm32: order stm32mp13-pinctrl nodes (diff) | |
| download | linux-1b02383c385b16b4b275e30a3dd5860c0fd95c4a.tar.xz linux-1b02383c385b16b4b275e30a3dd5860c0fd95c4a.zip | |
ARM: dts: stm32: Add ethernet support for DH STM32MP13xx DHCOR DHSBC board
Add ethernet support for the DH STM32MP13xx DHCOR DHSBC carrier board.
This carrier board is populated with two gigabit ethernet ports and two
Realtek RTL8211F PHYs, both are described in this DT patch.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
| -rw-r--r-- | arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts | 56 |
1 files changed, 56 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts b/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts index 5f4f6b6e427a..bacb70b4256b 100644 --- a/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts +++ b/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts @@ -22,6 +22,8 @@ "st,stm32mp135"; aliases { + ethernet0 = ðernet1; + ethernet1 = ðernet2; serial2 = &usart1; serial3 = &usart2; }; @@ -72,6 +74,60 @@ }; }; +ðernet1 { + phy-handle = <ðphy1>; + phy-mode = "rgmii-id"; + pinctrl-0 = <ð1_rgmii_pins_a>; + pinctrl-1 = <ð1_rgmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + st,ext-phyclk; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + ethphy1: ethernet-phy@1 { + /* RTL8211F */ + compatible = "ethernet-phy-id001c.c916"; + interrupt-parent = <&gpiog>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + reg = <1>; + reset-assert-us = <15000>; + reset-deassert-us = <55000>; + reset-gpios = <&gpioa 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ðernet2 { + phy-handle = <ðphy2>; + phy-mode = "rgmii-id"; + pinctrl-0 = <ð2_rgmii_pins_a>; + pinctrl-1 = <ð2_rgmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + st,ext-phyclk; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + ethphy2: ethernet-phy@1 { + /* RTL8211F */ + compatible = "ethernet-phy-id001c.c916"; + interrupt-parent = <&gpiog>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + reg = <1>; + reset-assert-us = <15000>; + reset-deassert-us = <55000>; + reset-gpios = <&gpiog 8 GPIO_ACTIVE_LOW>; + }; + }; +}; + &gpioa { gpio-line-names = "", "", "", "", "", "DHSBC_USB_PWR_CC1", "", "", |