Merge tag 'extcon-next-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon next for v5.19

Detailed description for this pull request:
1. update extcon core driver
- extcon_get_extcon_dev() has been almost used to get the extcon device
on booting time. If extcon provider driver is probed at late time,
the extcon consumer driver get the -EPROBE_DEFER return value.
It requires the inefficient handling code of -EPROBE_DEFER.
Instead, extcon_get_extcon_dev() will return -EPROBE_DEFER
if the required extcon device is none. It makes the extcon consumer driver
to be simplified when getting extcon device.
- Register device after dev_set_drvdata because of accessing
the sysfs attributes at timing of between drv_set_data and device_register.
- Fix some kernel-doc comments of extcon functions.

2. update extcon provider driver
- Update extcon-intel-int3496.c
: Add support for controlling vbus power via regulator and support
to the extcon-intel-int3496.c driver to bind to devices without
an ACPi companion. And fix the minor clean-up.
- Use struct_size() helper on extcon-usbc-cros-ec.c
- Remove the disable irq operation in system sleep for using vbus/id
gpio as the wakeup source on extcon-usb-gpio.c
- Add support of SM5703 device by using existing extcon-sm5502.c
and rename i2c_devic_id from sm5703 to sm5703-muic to reduce confusion
between SM5703 MFD device and extcon device.
- Add usb role class support and add queue work sync before driver release
on extcon-ptn5150.c

* tag 'extcon-next-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
  extcon: Modify extcon device to be created after driver data is set
  extcon: sm5502: Clarify SM5703's i2c device ID
  extcon: ptn5150: Add usb role class support
  extcon: ptn5150: Add queue work sync before driver release
  extcon: sm5502: Add support for SM5703
  dt-bindings: extcon: bindings for SM5703
  extcon: usb-gpio: Remove disable irq operation in system sleep
  extcon: Fix some kernel-doc comments
  extcon: usbc-cros-ec: Use struct_size() helper in kzalloc()
  extcon: int3496: Add support for controlling Vbus through a regulator
  extcon: int3496: Add support for binding to plain platform devices
  extcon: int3496: Request non-exclusive access to the ID GPIO
  extcon: int3496: Make the driver a bit less verbose
  extcon: Fix extcon_get_extcon_dev() error handling

16 files changed, 139 insertions, 70 deletions

diff --git a/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml b/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml
index fd2e55088888..7a224b2f0977 100644
--- a/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml
+++ b/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml
@@ -20,11 +20,12 @@ properties:
     enum:
       - siliconmitus,sm5502-muic
       - siliconmitus,sm5504-muic
+      - siliconmitus,sm5703-muic
 
   reg:
     maxItems: 1
-    description: I2C slave address of the device. Usually 0x25 for SM5502,
-      0x14 for SM5504.
+    description: I2C slave address of the device. Usually 0x25 for SM5502
+      and SM5703, 0x14 for SM5504.
 
   interrupts:
     maxItems: 1
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index 0d42e49105dd..dca7cecb37e3 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -131,6 +131,7 @@ config EXTCON_PALMAS
 config EXTCON_PTN5150
 	tristate "NXP PTN5150 CC LOGIC USB EXTCON support"
 	depends on I2C && (GPIOLIB || COMPILE_TEST)
+	depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH
 	select REGMAP_I2C
 	help
 	  Say Y here to enable support for USB peripheral and USB host
@@ -156,7 +157,7 @@ config EXTCON_RT8973A
 	  from abnormal high input voltage (up to 28V).
 
 config EXTCON_SM5502
-	tristate "Silicon Mitus SM5502/SM5504 EXTCON support"
+	tristate "Silicon Mitus SM5502/SM5504/SM5703 EXTCON support"
 	depends on I2C
 	select IRQ_DOMAIN
 	select REGMAP_I2C
diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
index 7c6d5857ff25..180be768c215 100644
--- a/drivers/extcon/extcon-axp288.c
+++ b/drivers/extcon/extcon-axp288.c
@@ -394,8 +394,8 @@ static int axp288_extcon_probe(struct platform_device *pdev)
 		if (adev) {
 			info->id_extcon = extcon_get_extcon_dev(acpi_dev_name(adev));
 			put_device(&adev->dev);
-			if (!info->id_extcon)
-				return -EPROBE_DEFER;
+			if (IS_ERR(info->id_extcon))
+				return PTR_ERR(info->id_extcon);
 
 			dev_info(dev, "controlling USB role\n");
 		} else {
diff --git a/drivers/extcon/extcon-intel-int3496.c b/drivers/extcon/extcon-intel-int3496.c
index fb527c23639e..ded1a85a5549 100644
--- a/drivers/extcon/extcon-intel-int3496.c
+++ b/drivers/extcon/extcon-intel-int3496.c
@@ -17,6 +17,7 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 
 #define INT3496_GPIO_USB_ID	0
 #define INT3496_GPIO_VBUS_EN	1
@@ -30,7 +31,9 @@ struct int3496_data {
 	struct gpio_desc *gpio_usb_id;
 	struct gpio_desc *gpio_vbus_en;
 	struct gpio_desc *gpio_usb_mux;
+	struct regulator *vbus_boost;
 	int usb_id_irq;
+	bool vbus_boost_enabled;
 };
 
 static const unsigned int int3496_cable[] = {
@@ -53,6 +56,27 @@ static const struct acpi_gpio_mapping acpi_int3496_default_gpios[] = {
 	{ },
 };
 
+static void int3496_set_vbus_boost(struct int3496_data *data, bool enable)
+{
+	int ret;
+
+	if (IS_ERR_OR_NULL(data->vbus_boost))
+		return;
+
+	if (data->vbus_boost_enabled == enable)
+		return;
+
+	if (enable)
+		ret = regulator_enable(data->vbus_boost);
+	else
+		ret = regulator_disable(data->vbus_boost);
+
+	if (ret == 0)
+		data->vbus_boost_enabled = enable;
+	else
+		dev_err(data->dev, "Error updating Vbus boost regulator: %d\n", ret);
+}
+
 static void int3496_do_usb_id(struct work_struct *work)
 {
 	struct int3496_data *data =
@@ -71,6 +95,8 @@ static void int3496_do_usb_id(struct work_struct *work)
 
 	if (!IS_ERR(data->gpio_vbus_en))
 		gpiod_direction_output(data->gpio_vbus_en, !id);
+	else
+		int3496_set_vbus_boost(data, !id);
 
 	extcon_set_state_sync(data->edev, EXTCON_USB_HOST, !id);
 }
@@ -91,10 +117,12 @@ static int int3496_probe(struct platform_device *pdev)
 	struct int3496_data *data;
 	int ret;
 
-	ret = devm_acpi_dev_add_driver_gpios(dev, acpi_int3496_default_gpios);
-	if (ret) {
-		dev_err(dev, "can't add GPIO ACPI mapping\n");
-		return ret;
+	if (has_acpi_companion(dev)) {
+		ret = devm_acpi_dev_add_driver_gpios(dev, acpi_int3496_default_gpios);
+		if (ret) {
+			dev_err(dev, "can't add GPIO ACPI mapping\n");
+			return ret;
+		}
 	}
 
 	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
@@ -106,7 +134,8 @@ static int int3496_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	data->gpio_usb_id = devm_gpiod_get(dev, "id", GPIOD_IN);
+	data->gpio_usb_id =
+		devm_gpiod_get(dev, "id", GPIOD_IN | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
 	if (IS_ERR(data->gpio_usb_id)) {
 		ret = PTR_ERR(data->gpio_usb_id);
 		dev_err(dev, "can't request USB ID GPIO: %d\n", ret);
@@ -120,12 +149,14 @@ static int int3496_probe(struct platform_device *pdev)
 	}
 
 	data->gpio_vbus_en = devm_gpiod_get(dev, "vbus", GPIOD_ASIS);
-	if (IS_ERR(data->gpio_vbus_en))
-		dev_info(dev, "can't request VBUS EN GPIO\n");
+	if (IS_ERR(data->gpio_vbus_en)) {
+		dev_dbg(dev, "can't request VBUS EN GPIO\n");
+		data->vbus_boost = devm_regulator_get_optional(dev, "vbus");
+	}
 
 	data->gpio_usb_mux = devm_gpiod_get(dev, "mux", GPIOD_ASIS);
 	if (IS_ERR(data->gpio_usb_mux))
-		dev_info(dev, "can't request USB MUX GPIO\n");
+		dev_dbg(dev, "can't request USB MUX GPIO\n");
 
 	/* register extcon device */
 	data->edev = devm_extcon_dev_allocate(dev, int3496_cable);
@@ -164,12 +195,19 @@ static const struct acpi_device_id int3496_acpi_match[] = {
 };
 MODULE_DEVICE_TABLE(acpi, int3496_acpi_match);
 
+static const struct platform_device_id int3496_ids[] = {
+	{ .name = "intel-int3496" },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, int3496_ids);
+
 static struct platform_driver int3496_driver = {
 	.driver = {
 		.name = "intel-int3496",
 		.acpi_match_table = int3496_acpi_match,
 	},
 	.probe = int3496_probe,
+	.id_table = int3496_ids,
 };
 
 module_platform_driver(int3496_driver);
diff --git a/drivers/extcon/extcon-ptn5150.c b/drivers/extcon/extcon-ptn5150.c
index 5b9a3cf8df26..017a07197f38 100644
--- a/drivers/extcon/extcon-ptn5150.c
+++ b/drivers/extcon/extcon-ptn5150.c
@@ -17,6 +17,7 @@
 #include <linux/slab.h>
 #include <linux/extcon-provider.h>
 #include <linux/gpio/consumer.h>
+#include <linux/usb/role.h>
 
 /* PTN5150 registers */
 #define PTN5150_REG_DEVICE_ID			0x01
@@ -52,6 +53,7 @@ struct ptn5150_info {
 	int irq;
 	struct work_struct irq_work;
 	struct mutex mutex;
+	struct usb_role_switch *role_sw;
 };
 
 /* List of detectable cables */
@@ -70,6 +72,7 @@ static const struct regmap_config ptn5150_regmap_config = {
 static void ptn5150_check_state(struct ptn5150_info *info)
 {
 	unsigned int port_status, reg_data, vbus;
+	enum usb_role usb_role = USB_ROLE_NONE;
 	int ret;
 
 	ret = regmap_read(info->regmap, PTN5150_REG_CC_STATUS, &reg_data);
@@ -85,6 +88,7 @@ static void ptn5150_check_state(struct ptn5150_info *info)
 		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, false);
 		gpiod_set_value_cansleep(info->vbus_gpiod, 0);
 		extcon_set_state_sync(info->edev, EXTCON_USB, true);
+		usb_role = USB_ROLE_DEVICE;
 		break;
 	case PTN5150_UFP_ATTACHED:
 		extcon_set_state_sync(info->edev, EXTCON_USB, false);
@@ -95,10 +99,18 @@ static void ptn5150_check_state(struct ptn5150_info *info)
 			gpiod_set_value_cansleep(info->vbus_gpiod, 1);
 
 		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, true);
+		usb_role = USB_ROLE_HOST;
 		break;
 	default:
 		break;
 	}
+
+	if (usb_role) {
+		ret = usb_role_switch_set_role(info->role_sw, usb_role);
+		if (ret)
+			dev_err(info->dev, "failed to set %s role: %d\n",
+				usb_role_string(usb_role), ret);
+	}
 }
 
 static void ptn5150_irq_work(struct work_struct *work)
@@ -133,6 +145,13 @@ static void ptn5150_irq_work(struct work_struct *work)
 			extcon_set_state_sync(info->edev,
 					EXTCON_USB, false);
 			gpiod_set_value_cansleep(info->vbus_gpiod, 0);
+
+			ret = usb_role_switch_set_role(info->role_sw,
+						       USB_ROLE_NONE);
+			if (ret)
+				dev_err(info->dev,
+					"failed to set none role: %d\n",
+					ret);
 		}
 	}
 
@@ -194,6 +213,14 @@ static int ptn5150_init_dev_type(struct ptn5150_info *info)
 	return 0;
 }
 
+static void ptn5150_work_sync_and_put(void *data)
+{
+	struct ptn5150_info *info = data;
+
+	cancel_work_sync(&info->irq_work);
+	usb_role_switch_put(info->role_sw);
+}
+
 static int ptn5150_i2c_probe(struct i2c_client *i2c)
 {
 	struct device *dev = &i2c->dev;
@@ -284,6 +311,15 @@ static int ptn5150_i2c_probe(struct i2c_client *i2c)
 	if (ret)
 		return -EINVAL;
 
+	info->role_sw = usb_role_switch_get(info->dev);
+	if (IS_ERR(info->role_sw))
+		return dev_err_probe(info->dev, PTR_ERR(info->role_sw),
+				     "failed to get role switch\n");
+
+	ret = devm_add_action_or_reset(dev, ptn5150_work_sync_and_put, info);
+	if (ret)
+		return ret;
+
 	/*
 	 * Update current extcon state if for example OTG connection was there
 	 * before the probe
diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c
index 93da2d8379b1..f706f5288257 100644
--- a/drivers/extcon/extcon-sm5502.c
+++ b/drivers/extcon/extcon-sm5502.c
@@ -798,6 +798,7 @@ static const struct sm5502_type sm5504_data = {
 static const struct of_device_id sm5502_dt_match[] = {
 	{ .compatible = "siliconmitus,sm5502-muic", .data = &sm5502_data },
 	{ .compatible = "siliconmitus,sm5504-muic", .data = &sm5504_data },
+	{ .compatible = "siliconmitus,sm5703-muic", .data = &sm5502_data },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, sm5502_dt_match);
@@ -830,6 +831,7 @@ static SIMPLE_DEV_PM_OPS(sm5502_muic_pm_ops,
 static const struct i2c_device_id sm5502_i2c_id[] = {
 	{ "sm5502", (kernel_ulong_t)&sm5502_data },
 	{ "sm5504", (kernel_ulong_t)&sm5504_data },
+	{ "sm5703-muic", (kernel_ulong_t)&sm5502_data },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, sm5502_i2c_id);
diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c
index f2b65d967384..40d967a11e87 100644
--- a/drivers/extcon/extcon-usb-gpio.c
+++ b/drivers/extcon/extcon-usb-gpio.c
@@ -226,16 +226,6 @@ static int usb_extcon_suspend(struct device *dev)
 		}
 	}
 
-	/*
-	 * We don't want to process any IRQs after this point
-	 * as GPIOs used behind I2C subsystem might not be
-	 * accessible until resume completes. So disable IRQ.
-	 */
-	if (info->id_gpiod)
-		disable_irq(info->id_irq);
-	if (info->vbus_gpiod)
-		disable_irq(info->vbus_irq);
-
 	if (!device_may_wakeup(dev))
 		pinctrl_pm_select_sleep_state(dev);
 
@@ -267,11 +257,6 @@ static int usb_extcon_resume(struct device *dev)
 		}
 	}
 
-	if (info->id_gpiod)
-		enable_irq(info->id_irq);
-	if (info->vbus_gpiod)
-		enable_irq(info->vbus_irq);
-
 	queue_delayed_work(system_power_efficient_wq,
 			   &info->wq_detcable, 0);
 
diff --git a/drivers/extcon/extcon-usbc-cros-ec.c b/drivers/extcon/extcon-usbc-cros-ec.c
index 5290cc2d19d9..fde1db62be0d 100644
--- a/drivers/extcon/extcon-usbc-cros-ec.c
+++ b/drivers/extcon/extcon-usbc-cros-ec.c
@@ -68,7 +68,7 @@ static int cros_ec_pd_command(struct cros_ec_extcon_info *info,
 	struct cros_ec_command *msg;
 	int ret;
 
-	msg = kzalloc(sizeof(*msg) + max(outsize, insize), GFP_KERNEL);
+	msg = kzalloc(struct_size(msg, data, max(outsize, insize)), GFP_KERNEL);
 	if (!msg)
 		return -ENOMEM;
 
diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index a09e704fd0fa..d3a32b806499 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -399,6 +399,7 @@ static ssize_t cable_state_show(struct device *dev,
 /**
  * extcon_sync() - Synchronize the state for an external connector.
  * @edev:	the extcon device
+ * @id:		the unique id indicating an external connector
  *
  * Note that this function send a notification in order to synchronize
  * the state and property of an external connector.
@@ -736,6 +737,9 @@ EXPORT_SYMBOL_GPL(extcon_set_property);
 
 /**
  * extcon_set_property_sync() - Set property of an external connector with sync.
+ * @edev:	the extcon device
+ * @id:		the unique id indicating an external connector
+ * @prop:	the property id indicating an extcon property
  * @prop_val:	the pointer including the new value of extcon property
  *
  * Note that when setting the property value of external connector,
@@ -851,6 +855,8 @@ EXPORT_SYMBOL_GPL(extcon_set_property_capability);
  * @extcon_name:	the extcon name provided with extcon_dev_register()
  *
  * Return the pointer of extcon device if success or ERR_PTR(err) if fail.
+ * NOTE: This function returns -EPROBE_DEFER so it may only be called from
+ * probe() functions.
  */
 struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name)
 {
@@ -864,7 +870,7 @@ struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name)
 		if (!strcmp(sd->name, extcon_name))
 			goto out;
 	}
-	sd = NULL;
+	sd = ERR_PTR(-EPROBE_DEFER);
 out:
 	mutex_unlock(&extcon_dev_list_lock);
 	return sd;
@@ -1218,19 +1224,14 @@ int extcon_dev_register(struct extcon_dev *edev)
 		edev->dev.type = &edev->extcon_dev_type;
 	}
 
-	ret = device_register(&edev->dev);
-	if (ret) {
-		put_device(&edev->dev);
-		goto err_dev;
-	}
-
 	spin_lock_init(&edev->lock);
-	edev->nh = devm_kcalloc(&edev->dev, edev->max_supported,
-				sizeof(*edev->nh), GFP_KERNEL);
-	if (!edev->nh) {
-		ret = -ENOMEM;
-		device_unregister(&edev->dev);
-		goto err_dev;
+	if (edev->max_supported) {
+		edev->nh = kcalloc(edev->max_supported, sizeof(*edev->nh),
+				GFP_KERNEL);
+		if (!edev->nh) {
+			ret = -ENOMEM;
+			goto err_alloc_nh;
+		}
 	}
 
 	for (index = 0; index < edev->max_supported; index++)
@@ -1241,6 +1242,12 @@ int extcon_dev_register(struct extcon_dev *edev)
 	dev_set_drvdata(&edev->dev, edev);
 	edev->state = 0;
 
+	ret = device_register(&edev->dev);
+	if (ret) {
+		put_device(&edev->dev);
+		goto err_dev;
+	}
+
 	mutex_lock(&extcon_dev_list_lock);
 	list_add(&edev->entry, &extcon_dev_list);
 	mutex_unlock(&extcon_dev_list_lock);
@@ -1249,6 +1256,9 @@ int extcon_dev_register(struct extcon_dev *edev)
 
 err_dev:
 	if (edev->max_supported)
+		kfree(edev->nh);
+err_alloc_nh:
+	if (edev->max_supported)
 		kfree(edev->extcon_dev_type.groups);
 err_alloc_groups:
 	if (edev->max_supported && edev->mutually_exclusive) {
@@ -1308,6 +1318,7 @@ void extcon_dev_unregister(struct extcon_dev *edev)
 	if (edev->max_supported) {
 		kfree(edev->extcon_dev_type.groups);
 		kfree(edev->cables);
+		kfree(edev->nh);
 	}
 
 	put_device(&edev->dev);
diff --git a/drivers/power/supply/axp288_charger.c b/drivers/power/supply/axp288_charger.c
index 19746e658a6a..15219ed43ce9 100644
--- a/drivers/power/supply/axp288_charger.c
+++ b/drivers/power/supply/axp288_charger.c
@@ -865,17 +865,20 @@ static int axp288_charger_probe(struct platform_device *pdev)
 	info->regmap_irqc = axp20x->regmap_irqc;
 
 	info->cable.edev = extcon_get_extcon_dev(AXP288_EXTCON_DEV_NAME);
-	if (info->cable.edev == NULL) {
-		dev_dbg(dev, "%s is not ready, probe deferred\n",
-			AXP288_EXTCON_DEV_NAME);
-		return -EPROBE_DEFER;
+	if (IS_ERR(info->cable.edev)) {
+		dev_err_probe(dev, PTR_ERR(info->cable.edev),
+			      "extcon_get_extcon_dev(%s) failed\n",
+			      AXP288_EXTCON_DEV_NAME);
+		return PTR_ERR(info->cable.edev);
 	}
 
 	if (acpi_dev_present(USB_HOST_EXTCON_HID, NULL, -1)) {
 		info->otg.cable = extcon_get_extcon_dev(USB_HOST_EXTCON_NAME);
-		if (info->otg.cable == NULL) {
-			dev_dbg(dev, "EXTCON_USB_HOST is not ready, probe deferred\n");
-			return -EPROBE_DEFER;
+		if (IS_ERR(info->otg.cable)) {
+			dev_err_probe(dev, PTR_ERR(info->otg.cable),
+				      "extcon_get_extcon_dev(%s) failed\n",
+				      USB_HOST_EXTCON_NAME);
+			return PTR_ERR(info->otg.cable);
 		}
 		dev_info(dev, "Using " USB_HOST_EXTCON_HID " extcon for usb-id\n");
 	}
diff --git a/drivers/power/supply/charger-manager.c b/drivers/power/supply/charger-manager.c
index d67edb760c94..92db79400a6a 100644
--- a/drivers/power/supply/charger-manager.c
+++ b/drivers/power/supply/charger-manager.c
@@ -985,13 +985,10 @@ static int charger_extcon_init(struct charger_manager *cm,
 	cable->nb.notifier_call = charger_extcon_notifier;
 
 	cable->extcon_dev = extcon_get_extcon_dev(cable->extcon_name);
-	if (IS_ERR_OR_NULL(cable->extcon_dev)) {
+	if (IS_ERR(cable->extcon_dev)) {
 		pr_err("Cannot find extcon_dev for %s (cable: %s)\n",
 			cable->extcon_name, cable->name);
-		if (cable->extcon_dev == NULL)
-			return -EPROBE_DEFER;
-		else
-			return PTR_ERR(cable->extcon_dev);
+		return PTR_ERR(cable->extcon_dev);
 	}
 
 	for (i = 0; i < ARRAY_SIZE(extcon_mapping); i++) {
diff --git a/drivers/power/supply/max8997_charger.c b/drivers/power/supply/max8997_charger.c
index 127c73b0b3bd..1ec3535a257d 100644
--- a/drivers/power/supply/max8997_charger.c
+++ b/drivers/power/supply/max8997_charger.c
@@ -242,10 +242,10 @@ static int max8997_battery_probe(struct platform_device *pdev)
 		dev_info(&pdev->dev, "couldn't get charger regulator\n");
 	}
 	charger->edev = extcon_get_extcon_dev("max8997-muic");
-	if (IS_ERR_OR_NULL(charger->edev)) {
-		if (!charger->edev)
-			return -EPROBE_DEFER;
-		dev_info(charger->dev, "couldn't get extcon device\n");
+	if (IS_ERR(charger->edev)) {
+		dev_err_probe(charger->dev, PTR_ERR(charger->edev),
+			      "couldn't get extcon device: max8997-muic\n");
+		return PTR_ERR(charger->edev);
 	}
 
 	if (!IS_ERR(charger->reg) && !IS_ERR_OR_NULL(charger->edev)) {
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index 8cad9e7d3368..4982edd13047 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -455,13 +455,8 @@ static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
 	 * This device property is for kernel internal use only and
 	 * is expected to be set by the glue code.
 	 */
-	if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
-		edev = extcon_get_extcon_dev(name);
-		if (!edev)
-			return ERR_PTR(-EPROBE_DEFER);
-
-		return edev;
-	}
+	if (device_property_read_string(dev, "linux,extcon-name", &name) == 0)
+		return extcon_get_extcon_dev(name);
 
 	/*
 	 * Try to get an extcon device from the USB PHY controller's "port"
diff --git a/drivers/usb/phy/phy-omap-otg.c b/drivers/usb/phy/phy-omap-otg.c
index ee0863c6553e..6e6ef8c0bc7e 100644
--- a/drivers/usb/phy/phy-omap-otg.c
+++ b/drivers/usb/phy/phy-omap-otg.c
@@ -95,8 +95,8 @@ static int omap_otg_probe(struct platform_device *pdev)
 		return -ENODEV;
 
 	extcon = extcon_get_extcon_dev(config->extcon);
-	if (!extcon)
-		return -EPROBE_DEFER;
+	if (IS_ERR(extcon))
+		return PTR_ERR(extcon);
 
 	otg_dev = devm_kzalloc(&pdev->dev, sizeof(*otg_dev), GFP_KERNEL);
 	if (!otg_dev)
diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c
index 72f9001b0792..96c55eaf3f80 100644
--- a/drivers/usb/typec/tcpm/fusb302.c
+++ b/drivers/usb/typec/tcpm/fusb302.c
@@ -1708,8 +1708,8 @@ static int fusb302_probe(struct i2c_client *client,
 	 */
 	if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
 		chip->extcon = extcon_get_extcon_dev(name);
-		if (!chip->extcon)
-			return -EPROBE_DEFER;
+		if (IS_ERR(chip->extcon))
+			return PTR_ERR(chip->extcon);
 	}
 
 	chip->vbus = devm_regulator_get(chip->dev, "vbus");
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index 0c19010da77f..685401d94d39 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -296,7 +296,7 @@ static inline void devm_extcon_unregister_notifier_all(struct device *dev,
 
 static inline struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name)
 {
-	return ERR_PTR(-ENODEV);
+	return NULL;
 }
 
 static inline struct extcon_dev *extcon_find_edev_by_node(struct device_node *node)