diff options
| author | Zhang Run <zhang.run@zte.com.cn> | 2019-01-24 06:48:49 +0100 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2019-01-25 07:33:11 +0100 |
| commit | 6eea3527e68acc22483f4763c8682f223eb90029 (patch) | |
| tree | 1ba039513c7e868fb0a54ed6d70a78c7cc765507 | |
| parent | MAINTAINERS: Update cavium networking drivers (diff) | |
| download | linux-6eea3527e68acc22483f4763c8682f223eb90029.tar.xz linux-6eea3527e68acc22483f4763c8682f223eb90029.zip | |
net: usb: asix: ax88772_bind return error when hw_reset fail
The ax88772_bind() should return error code immediately when the PHY
was not reset properly through ax88772a_hw_reset().
Otherwise, The asix_get_phyid() will block when get the PHY
Identifier from the PHYSID1 MII registers through asix_mdio_read()
due to the PHY isn't ready. Furthermore, it will produce a lot of
error message cause system crash.As follows:
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to send
software reset: ffffffb9
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable
software MII access
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read
reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable
software MII access
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read
reg index 0x0000: -71
...
Signed-off-by: Zhang Run <zhang.run@zte.com.cn>
Reviewed-by: Yang Wei <yang.wei9@zte.com.cn>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
| -rw-r--r-- | drivers/net/usb/asix_devices.c | 9 |
1 files changed, 7 insertions, 2 deletions
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index b654f05b2ccd..3d93993e74da 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -739,8 +739,13 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &chipcode, 0); chipcode &= AX_CHIPCODE_MASK; - (chipcode == AX_AX88772_CHIPCODE) ? ax88772_hw_reset(dev, 0) : - ax88772a_hw_reset(dev, 0); + ret = (chipcode == AX_AX88772_CHIPCODE) ? ax88772_hw_reset(dev, 0) : + ax88772a_hw_reset(dev, 0); + + if (ret < 0) { + netdev_dbg(dev->net, "Failed to reset AX88772: %d\n", ret); + return ret; + } /* Read PHYID register *AFTER* the PHY was reset properly */ phyid = asix_get_phyid(dev); |