Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "i2c driver bugfixes (s3c2410, slave-eeprom, sh_mobile), size
  regression "bugfix" (i2c slave), documentation bugfix (st).

  Also, one documentation update (da9063), so some devicetrees can now
  be verified"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: sh_mobile: terminate DMA reads properly
  i2c: Only include slave support if selected
  i2c: s3c2410: fix ABBA deadlock by keeping clock prepared
  i2c: slave-eeprom: fix boundary check when using sysfs
  i2c: st: Rename clock reference to something that exists
  DT: i2c: Add devices handled by the da9063 MFD driver

8 files changed, 41 insertions, 10 deletions

diff --git a/Documentation/devicetree/bindings/i2c/i2c-st.txt b/Documentation/devicetree/bindings/i2c/i2c-st.txt
index 437e0db3823c..4c26fda3844a 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-st.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-st.txt
@@ -31,7 +31,7 @@ i2c0: i2c@fed40000 {
 	compatible	= "st,comms-ssc4-i2c";
 	reg		= <0xfed40000 0x110>;
 	interrupts	=  <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-	clocks		= <&CLK_S_ICN_REG_0>;
+	clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
 	clock-names	= "ssc";
 	clock-frequency = <400000>;
 	pinctrl-names	= "default";
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index 9f4e3824e71e..9f41d05be3be 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -47,6 +47,7 @@ dallas,ds3232		Extremely Accurate I²C RTC with Integrated Crystal and SRAM
 dallas,ds4510		CPU Supervisor with Nonvolatile Memory and Programmable I/O
 dallas,ds75		Digital Thermometer and Thermostat
 dlg,da9053		DA9053: flexible system level PMIC with multicore support
+dlg,da9063		DA9063: system PMIC for quad-core application processors
 epson,rx8025		High-Stability. I2C-Bus INTERFACE REAL TIME CLOCK MODULE
 epson,rx8581		I2C-BUS INTERFACE REAL TIME CLOCK MODULE
 fsl,mag3110		MAG3110: Xtrinsic High Accuracy, 3D Magnetometer
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 31e8308ba899..ab838d9e28b6 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -881,6 +881,7 @@ config I2C_XLR
 config I2C_RCAR
 	tristate "Renesas R-Car I2C Controller"
 	depends on ARCH_SHMOBILE || COMPILE_TEST
+	select I2C_SLAVE
 	help
 	  If you say yes to this option, support will be included for the
 	  R-Car I2C controller.
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index bff20a589621..958c8db4ec30 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -785,14 +785,16 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap,
 	int ret;
 
 	pm_runtime_get_sync(&adap->dev);
-	clk_prepare_enable(i2c->clk);
+	ret = clk_enable(i2c->clk);
+	if (ret)
+		return ret;
 
 	for (retry = 0; retry < adap->retries; retry++) {
 
 		ret = s3c24xx_i2c_doxfer(i2c, msgs, num);
 
 		if (ret != -EAGAIN) {
-			clk_disable_unprepare(i2c->clk);
+			clk_disable(i2c->clk);
 			pm_runtime_put(&adap->dev);
 			return ret;
 		}
@@ -802,7 +804,7 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap,
 		udelay(100);
 	}
 
-	clk_disable_unprepare(i2c->clk);
+	clk_disable(i2c->clk);
 	pm_runtime_put(&adap->dev);
 	return -EREMOTEIO;
 }
@@ -1197,7 +1199,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 
 	clk_prepare_enable(i2c->clk);
 	ret = s3c24xx_i2c_init(i2c);
-	clk_disable_unprepare(i2c->clk);
+	clk_disable(i2c->clk);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "I2C controller init failed\n");
 		return ret;
@@ -1210,6 +1212,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 		i2c->irq = ret = platform_get_irq(pdev, 0);
 		if (ret <= 0) {
 			dev_err(&pdev->dev, "cannot find IRQ\n");
+			clk_unprepare(i2c->clk);
 			return ret;
 		}
 
@@ -1218,6 +1221,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 
 		if (ret != 0) {
 			dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
+			clk_unprepare(i2c->clk);
 			return ret;
 		}
 	}
@@ -1225,6 +1229,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 	ret = s3c24xx_i2c_register_cpufreq(i2c);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to register cpufreq notifier\n");
+		clk_unprepare(i2c->clk);
 		return ret;
 	}
 
@@ -1241,6 +1246,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to add bus to i2c core\n");
 		s3c24xx_i2c_deregister_cpufreq(i2c);
+		clk_unprepare(i2c->clk);
 		return ret;
 	}
 
@@ -1262,6 +1268,8 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
 {
 	struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
 
+	clk_unprepare(i2c->clk);
+
 	pm_runtime_disable(&i2c->adap.dev);
 	pm_runtime_disable(&pdev->dev);
 
@@ -1293,13 +1301,16 @@ static int s3c24xx_i2c_resume_noirq(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
+	int ret;
 
 	if (!IS_ERR(i2c->sysreg))
 		regmap_write(i2c->sysreg, EXYNOS5_SYS_I2C_CFG, i2c->sys_i2c_cfg);
 
-	clk_prepare_enable(i2c->clk);
+	ret = clk_enable(i2c->clk);
+	if (ret)
+		return ret;
 	s3c24xx_i2c_init(i2c);
-	clk_disable_unprepare(i2c->clk);
+	clk_disable(i2c->clk);
 	i2c->suspended = 0;
 
 	return 0;
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 440d5dbc8b5f..007818b3e174 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -139,6 +139,7 @@ struct sh_mobile_i2c_data {
 	int pos;
 	int sr;
 	bool send_stop;
+	bool stop_after_dma;
 
 	struct resource *res;
 	struct dma_chan *dma_tx;
@@ -407,7 +408,7 @@ static int sh_mobile_i2c_isr_tx(struct sh_mobile_i2c_data *pd)
 
 	if (pd->pos == pd->msg->len) {
 		/* Send stop if we haven't yet (DMA case) */
-		if (pd->send_stop && (iic_rd(pd, ICCR) & ICCR_BBSY))
+		if (pd->send_stop && pd->stop_after_dma)
 			i2c_op(pd, OP_TX_STOP, 0);
 		return 1;
 	}
@@ -449,6 +450,13 @@ static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd)
 		real_pos = pd->pos - 2;
 
 		if (pd->pos == pd->msg->len) {
+			if (pd->stop_after_dma) {
+				/* Simulate PIO end condition after DMA transfer */
+				i2c_op(pd, OP_RX_STOP, 0);
+				pd->pos++;
+				break;
+			}
+
 			if (real_pos < 0) {
 				i2c_op(pd, OP_RX_STOP, 0);
 				break;
@@ -536,6 +544,7 @@ static void sh_mobile_i2c_dma_callback(void *data)
 
 	sh_mobile_i2c_dma_unmap(pd);
 	pd->pos = pd->msg->len;
+	pd->stop_after_dma = true;
 
 	iic_set_clr(pd, ICIC, 0, ICIC_TDMAE | ICIC_RDMAE);
 }
@@ -726,6 +735,7 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
 		bool do_start = pd->send_stop || !i;
 		msg = &msgs[i];
 		pd->send_stop = i == num - 1 || msg->flags & I2C_M_STOP;
+		pd->stop_after_dma = false;
 
 		err = start_ch(pd, msg, do_start);
 		if (err)
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 39d25a8cb1ad..e9eae57a2b50 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -2972,6 +2972,7 @@ trace:
 }
 EXPORT_SYMBOL(i2c_smbus_xfer);
 
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
 int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb)
 {
 	int ret;
@@ -3019,6 +3020,7 @@ int i2c_slave_unregister(struct i2c_client *client)
 	return ret;
 }
 EXPORT_SYMBOL_GPL(i2c_slave_unregister);
+#endif
 
 MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
 MODULE_DESCRIPTION("I2C-Bus main module");
diff --git a/drivers/i2c/i2c-slave-eeprom.c b/drivers/i2c/i2c-slave-eeprom.c
index 6631400b5f02..cf9b09db092f 100644
--- a/drivers/i2c/i2c-slave-eeprom.c
+++ b/drivers/i2c/i2c-slave-eeprom.c
@@ -74,7 +74,7 @@ static ssize_t i2c_slave_eeprom_bin_read(struct file *filp, struct kobject *kobj
 	struct eeprom_data *eeprom;
 	unsigned long flags;
 
-	if (off + count >= attr->size)
+	if (off + count > attr->size)
 		return -EFBIG;
 
 	eeprom = dev_get_drvdata(container_of(kobj, struct device, kobj));
@@ -92,7 +92,7 @@ static ssize_t i2c_slave_eeprom_bin_write(struct file *filp, struct kobject *kob
 	struct eeprom_data *eeprom;
 	unsigned long flags;
 
-	if (off + count >= attr->size)
+	if (off + count > attr->size)
 		return -EFBIG;
 
 	eeprom = dev_get_drvdata(container_of(kobj, struct device, kobj));
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index e3a1721c8354..7c7695940ddd 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -228,7 +228,9 @@ struct i2c_client {
 	struct device dev;		/* the device structure		*/
 	int irq;			/* irq issued by device		*/
 	struct list_head detected;
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
 	i2c_slave_cb_t slave_cb;	/* callback for slave mode	*/
+#endif
 };
 #define to_i2c_client(d) container_of(d, struct i2c_client, dev)
 
@@ -253,6 +255,7 @@ static inline void i2c_set_clientdata(struct i2c_client *dev, void *data)
 
 /* I2C slave support */
 
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
 enum i2c_slave_event {
 	I2C_SLAVE_REQ_READ_START,
 	I2C_SLAVE_REQ_READ_END,
@@ -269,6 +272,7 @@ static inline int i2c_slave_event(struct i2c_client *client,
 {
 	return client->slave_cb(client, event, val);
 }
+#endif
 
 /**
  * struct i2c_board_info - template for device creation
@@ -404,8 +408,10 @@ struct i2c_algorithm {
 	/* To determine what the adapter supports */
 	u32 (*functionality) (struct i2c_adapter *);
 
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
 	int (*reg_slave)(struct i2c_client *client);
 	int (*unreg_slave)(struct i2c_client *client);
+#endif
 };
 
 /**