diff options
author | Rafał Miłecki <zajec5@gmail.com> | 2015-06-10 23:05:08 +0200 |
---|---|---|
committer | Ralf Baechle <ralf@linux-mips.org> | 2015-06-21 21:55:33 +0200 |
commit | f6e734a8c162297953d7bfc0f3f6bf4f8c33d72f (patch) | |
tree | 285ec89e3f7d713f42f66cd1ba16dc637976c26f | |
parent | MIPS: use for_each_sg() (diff) | |
download | linux-f6e734a8c162297953d7bfc0f3f6bf4f8c33d72f.tar.xz linux-f6e734a8c162297953d7bfc0f3f6bf4f8c33d72f.zip |
MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/
After Broadcom switched from MIPS to ARM for their home routers we need
to have NVRAM driver in some common place (not arch/mips/). As explained
in Kconfig, this driver is responsible for parsing SoC configuration
data that is passed to the kernel in flash from the bootloader firmware
called "CFE".
We were thinking about putting it in bus directory, however there are
two possible buses for MIPS: drivers/ssb/ and drivers/bcma/. So this
won't fit there and this is why I would like to move this driver to the
drivers/firmware/.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Reviewed-by: Paul Walmsley <paul@pwsan.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Mike Waychison <mikew@google.com>
Cc: Roy Franz <roy.franz@linaro.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Patchwork: https://patchwork.linux-mips.org/patch/10544/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-rw-r--r-- | MAINTAINERS | 6 | ||||
-rw-r--r-- | arch/mips/Kconfig | 1 | ||||
-rw-r--r-- | arch/mips/bcm47xx/Makefile | 2 | ||||
-rw-r--r-- | drivers/firmware/Kconfig | 1 | ||||
-rw-r--r-- | drivers/firmware/Makefile | 1 | ||||
-rw-r--r-- | drivers/firmware/broadcom/Kconfig | 11 | ||||
-rw-r--r-- | drivers/firmware/broadcom/Makefile | 1 | ||||
-rw-r--r-- | drivers/firmware/broadcom/bcm47xx_nvram.c (renamed from arch/mips/bcm47xx/nvram.c) | 2 | ||||
-rw-r--r-- | include/linux/bcm47xx_nvram.h | 2 |
9 files changed, 25 insertions, 2 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 43043f0b354e..25a17aa20741 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2265,6 +2265,12 @@ S: Supported F: drivers/gpio/gpio-bcm-kona.c F: Documentation/devicetree/bindings/gpio/gpio-bcm-kona.txt +BROADCOM NVRAM DRIVER +M: Rafał Miłecki <zajec5@gmail.com> +L: linux-mips@linux-mips.org +S: Maintained +F: drivers/firmware/broadcom/* + BROADCOM SPECIFIC AMBA DRIVER (BCMA) M: Rafał Miłecki <zajec5@gmail.com> L: linux-wireless@vger.kernel.org diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index d53b43237f7f..dbb1a1d0f9b3 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -190,6 +190,7 @@ config BCM47XX select USE_GENERIC_EARLY_PRINTK_8250 select GPIOLIB select LEDS_GPIO_REGISTER + select BCM47XX_NVRAM help Support for BCM47XX based boards diff --git a/arch/mips/bcm47xx/Makefile b/arch/mips/bcm47xx/Makefile index d58c51b5e501..66bea4ecf449 100644 --- a/arch/mips/bcm47xx/Makefile +++ b/arch/mips/bcm47xx/Makefile @@ -3,5 +3,5 @@ # under Linux. # -obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o +obj-y += irq.o prom.o serial.o setup.o time.o sprom.o obj-y += board.o buttons.o leds.o workarounds.o diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 6517132e5d8b..99c69a3205c4 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -136,6 +136,7 @@ config QCOM_SCM bool depends on ARM || ARM64 +source "drivers/firmware/broadcom/Kconfig" source "drivers/firmware/google/Kconfig" source "drivers/firmware/efi/Kconfig" diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile index 3fdd3912709a..210c6e0550d3 100644 --- a/drivers/firmware/Makefile +++ b/drivers/firmware/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o obj-$(CONFIG_QCOM_SCM) += qcom_scm.o CFLAGS_qcom_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) +obj-y += broadcom/ obj-$(CONFIG_GOOGLE_FIRMWARE) += google/ obj-$(CONFIG_EFI) += efi/ obj-$(CONFIG_UEFI_CPER) += efi/ diff --git a/drivers/firmware/broadcom/Kconfig b/drivers/firmware/broadcom/Kconfig new file mode 100644 index 000000000000..6bed119930dd --- /dev/null +++ b/drivers/firmware/broadcom/Kconfig @@ -0,0 +1,11 @@ +config BCM47XX_NVRAM + bool "Broadcom NVRAM driver" + depends on BCM47XX || ARCH_BCM_5301X + help + Broadcom home routers contain flash partition called "nvram" with all + important hardware configuration as well as some minor user setup. + NVRAM partition contains a text-like data representing name=value + pairs. + This driver provides an easy way to get value of requested parameter. + It simply reads content of NVRAM and parses it. It doesn't control any + hardware part itself. diff --git a/drivers/firmware/broadcom/Makefile b/drivers/firmware/broadcom/Makefile new file mode 100644 index 000000000000..d0e683583cd6 --- /dev/null +++ b/drivers/firmware/broadcom/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_BCM47XX_NVRAM) += bcm47xx_nvram.o diff --git a/arch/mips/bcm47xx/nvram.c b/drivers/firmware/broadcom/bcm47xx_nvram.c index 9ccdce816f84..87add3fdce52 100644 --- a/arch/mips/bcm47xx/nvram.c +++ b/drivers/firmware/broadcom/bcm47xx_nvram.c @@ -244,3 +244,5 @@ char *bcm47xx_nvram_get_contents(size_t *nvram_size) return nvram; } EXPORT_SYMBOL(bcm47xx_nvram_get_contents); + +MODULE_LICENSE("GPLv2"); diff --git a/include/linux/bcm47xx_nvram.h b/include/linux/bcm47xx_nvram.h index c73927c66c2c..2793652fbf66 100644 --- a/include/linux/bcm47xx_nvram.h +++ b/include/linux/bcm47xx_nvram.h @@ -12,7 +12,7 @@ #include <linux/kernel.h> #include <linux/vmalloc.h> -#ifdef CONFIG_BCM47XX +#ifdef CONFIG_BCM47XX_NVRAM int bcm47xx_nvram_init_from_mem(u32 base, u32 lim); int bcm47xx_nvram_getenv(const char *name, char *val, size_t val_len); int bcm47xx_nvram_gpio_pin(const char *name); |