summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJens Axboe <axboe@suse.de>2006-01-06 09:28:07 +0100
committerLinus Torvalds <torvalds@g5.osdl.org>2006-01-06 17:36:09 +0100
commit9b847548663ef1039dd49f0eb4463d001e596bc3 (patch)
tree105a0eece522b1347bea57f609f6c04ed673fdb3
parent[PATCH] md: allow sync-speed to be controlled per-device (diff)
downloadlinux-9b847548663ef1039dd49f0eb4463d001e596bc3.tar.xz
linux-9b847548663ef1039dd49f0eb4463d001e596bc3.zip
[PATCH] Suspend support for libata
This patch adds suspend patch to libata, and ata_piix in particular. For most low level drivers, they should just need to add the 4 hooks to work. As I can only test ata_piix, I didn't enable it for more though. Suspend support is the single most important feature on a notebook, and most new notebooks have sata drives. It's quite embarrassing that we _still_ do not support this. Right now, it's perfectly possible to suspend the drive in mid-transfer. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-rw-r--r--drivers/scsi/ata_piix.c4
-rw-r--r--drivers/scsi/libata-core.c114
-rw-r--r--drivers/scsi/libata-scsi.c16
-rw-r--r--drivers/scsi/scsi_sysfs.c31
-rw-r--r--include/linux/ata.h2
-rw-r--r--include/linux/libata.h8
-rw-r--r--include/scsi/scsi_host.h6
7 files changed, 181 insertions, 0 deletions
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index 0ea27873b9ff..f79630340028 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -166,6 +166,8 @@ static struct pci_driver piix_pci_driver = {
.id_table = piix_pci_tbl,
.probe = piix_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
};
static struct scsi_host_template piix_sht = {
@@ -186,6 +188,8 @@ static struct scsi_host_template piix_sht = {
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};
static const struct ata_port_operations piix_pata_ops = {
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 9ea102587914..9c66d4059399 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -4154,6 +4154,96 @@ err_out:
* Inherited from caller.
*/
+/*
+ * Execute a 'simple' command, that only consists of the opcode 'cmd' itself,
+ * without filling any other registers
+ */
+static int ata_do_simple_cmd(struct ata_port *ap, struct ata_device *dev,
+ u8 cmd)
+{
+ struct ata_taskfile tf;
+ int err;
+
+ ata_tf_init(ap, &tf, dev->devno);
+
+ tf.command = cmd;
+ tf.flags |= ATA_TFLAG_DEVICE;
+ tf.protocol = ATA_PROT_NODATA;
+
+ err = ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0);
+ if (err)
+ printk(KERN_ERR "%s: ata command failed: %d\n",
+ __FUNCTION__, err);
+
+ return err;
+}
+
+static int ata_flush_cache(struct ata_port *ap, struct ata_device *dev)
+{
+ u8 cmd;
+
+ if (!ata_try_flush_cache(dev))
+ return 0;
+
+ if (ata_id_has_flush_ext(dev->id))
+ cmd = ATA_CMD_FLUSH_EXT;
+ else
+ cmd = ATA_CMD_FLUSH;
+
+ return ata_do_simple_cmd(ap, dev, cmd);
+}
+
+static int ata_standby_drive(struct ata_port *ap, struct ata_device *dev)
+{
+ return ata_do_simple_cmd(ap, dev, ATA_CMD_STANDBYNOW1);
+}
+
+static int ata_start_drive(struct ata_port *ap, struct ata_device *dev)
+{
+ return ata_do_simple_cmd(ap, dev, ATA_CMD_IDLEIMMEDIATE);
+}
+
+/**
+ * ata_device_resume - wakeup a previously suspended devices
+ *
+ * Kick the drive back into action, by sending it an idle immediate
+ * command and making sure its transfer mode matches between drive
+ * and host.
+ *
+ */
+int ata_device_resume(struct ata_port *ap, struct ata_device *dev)
+{
+ if (ap->flags & ATA_FLAG_SUSPENDED) {
+ ap->flags &= ~ATA_FLAG_SUSPENDED;
+ ata_set_mode(ap);
+ }
+ if (!ata_dev_present(dev))
+ return 0;
+ if (dev->class == ATA_DEV_ATA)
+ ata_start_drive(ap, dev);
+
+ return 0;
+}
+
+/**
+ * ata_device_suspend - prepare a device for suspend
+ *
+ * Flush the cache on the drive, if appropriate, then issue a
+ * standbynow command.
+ *
+ */
+int ata_device_suspend(struct ata_port *ap, struct ata_device *dev)
+{
+ if (!ata_dev_present(dev))
+ return 0;
+ if (dev->class == ATA_DEV_ATA)
+ ata_flush_cache(ap, dev);
+
+ ata_standby_drive(ap, dev);
+ ap->flags |= ATA_FLAG_SUSPENDED;
+ return 0;
+}
+
int ata_port_start (struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
@@ -4902,6 +4992,23 @@ int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits)
return (tmp == bits->val) ? 1 : 0;
}
+
+int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+ return 0;
+}
+
+int ata_pci_device_resume(struct pci_dev *pdev)
+{
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_enable_device(pdev);
+ pci_set_master(pdev);
+ return 0;
+}
#endif /* CONFIG_PCI */
@@ -5005,4 +5112,11 @@ EXPORT_SYMBOL_GPL(ata_pci_host_stop);
EXPORT_SYMBOL_GPL(ata_pci_init_native_mode);
EXPORT_SYMBOL_GPL(ata_pci_init_one);
EXPORT_SYMBOL_GPL(ata_pci_remove_one);
+EXPORT_SYMBOL_GPL(ata_pci_device_suspend);
+EXPORT_SYMBOL_GPL(ata_pci_device_resume);
#endif /* CONFIG_PCI */
+
+EXPORT_SYMBOL_GPL(ata_device_suspend);
+EXPORT_SYMBOL_GPL(ata_device_resume);
+EXPORT_SYMBOL_GPL(ata_scsi_device_suspend);
+EXPORT_SYMBOL_GPL(ata_scsi_device_resume);
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index e0439be4b573..c1ebede14a48 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -396,6 +396,22 @@ void ata_dump_status(unsigned id, struct ata_taskfile *tf)
}
}
+int ata_scsi_device_resume(struct scsi_device *sdev)
+{
+ struct ata_port *ap = (struct ata_port *) &sdev->host->hostdata[0];
+ struct ata_device *dev = &ap->device[sdev->id];
+
+ return ata_device_resume(ap, dev);
+}
+
+int ata_scsi_device_suspend(struct scsi_device *sdev)
+{
+ struct ata_port *ap = (struct ata_port *) &sdev->host->hostdata[0];
+ struct ata_device *dev = &ap->device[sdev->id];
+
+ return ata_device_suspend(ap, dev);
+}
+
/**
* ata_to_sense_error - convert ATA error to SCSI error
* @id: ATA device number
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 15842b1f0f4a..ea7f3a433572 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -263,9 +263,40 @@ static int scsi_bus_match(struct device *dev, struct device_driver *gendrv)
return (sdp->inq_periph_qual == SCSI_INQ_PQ_CON)? 1: 0;
}
+static int scsi_bus_suspend(struct device * dev, pm_message_t state)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct scsi_host_template *sht = sdev->host->hostt;
+ int err;
+
+ err = scsi_device_quiesce(sdev);
+ if (err)
+ return err;
+
+ if (sht->suspend)
+ err = sht->suspend(sdev);
+
+ return err;
+}
+
+static int scsi_bus_resume(struct device * dev)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct scsi_host_template *sht = sdev->host->hostt;
+ int err = 0;
+
+ if (sht->resume)
+ err = sht->resume(sdev);
+
+ scsi_device_resume(sdev);
+ return err;
+}
+
struct bus_type scsi_bus_type = {
.name = "scsi",
.match = scsi_bus_match,
+ .suspend = scsi_bus_suspend,
+ .resume = scsi_bus_resume,
};
int scsi_sysfs_register(void)
diff --git a/include/linux/ata.h b/include/linux/ata.h
index d2873b732bb1..3eb80c391b39 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -141,6 +141,8 @@ enum {
ATA_CMD_PACKET = 0xA0,
ATA_CMD_VERIFY = 0x40,
ATA_CMD_VERIFY_EXT = 0x42,
+ ATA_CMD_STANDBYNOW1 = 0xE0,
+ ATA_CMD_IDLEIMMEDIATE = 0xE1,
ATA_CMD_INIT_DEV_PARAMS = 0x91,
/* SETFEATURES stuff */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index e828e172ccbf..cdab75c209a0 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -124,6 +124,8 @@ enum {
ATA_FLAG_DEBUGMSG = (1 << 10),
ATA_FLAG_NO_ATAPI = (1 << 11), /* No ATAPI support */
+ ATA_FLAG_SUSPENDED = (1 << 12), /* port is suspended */
+
ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */
ATA_QCFLAG_SG = (1 << 3), /* have s/g table? */
ATA_QCFLAG_SINGLE = (1 << 4), /* no s/g, just a single buffer */
@@ -436,6 +438,8 @@ extern void ata_std_ports(struct ata_ioports *ioaddr);
extern int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
unsigned int n_ports);
extern void ata_pci_remove_one (struct pci_dev *pdev);
+extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state);
+extern int ata_pci_device_resume(struct pci_dev *pdev);
#endif /* CONFIG_PCI */
extern int ata_device_add(const struct ata_probe_ent *ent);
extern void ata_host_set_remove(struct ata_host_set *host_set);
@@ -445,6 +449,10 @@ extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmn
extern int ata_scsi_error(struct Scsi_Host *host);
extern int ata_scsi_release(struct Scsi_Host *host);
extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
+extern int ata_scsi_device_resume(struct scsi_device *);
+extern int ata_scsi_device_suspend(struct scsi_device *);
+extern int ata_device_resume(struct ata_port *, struct ata_device *);
+extern int ata_device_suspend(struct ata_port *, struct ata_device *);
extern int ata_ratelimit(void);
/*
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 6cbb1982ed03..6297885a35e7 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -296,6 +296,12 @@ struct scsi_host_template {
int (*proc_info)(struct Scsi_Host *, char *, char **, off_t, int, int);
/*
+ * suspend support
+ */
+ int (*resume)(struct scsi_device *);
+ int (*suspend)(struct scsi_device *);
+
+ /*
* Name of proc directory
*/
char *proc_name;