Merge remote-tracking branch 'regulator/topic/max8997' into regulator-next

5 files changed, 384 insertions, 18 deletions

diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
new file mode 100644
index 000000000000..9fd69a18b0ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
@@ -0,0 +1,146 @@
+* Maxim MAX8997 Voltage and Current Regulator
+
+The Maxim MAX8997 is a multi-function device which includes volatage and
+current regulators, rtc, charger controller and other sub-blocks. It is
+interfaced to the host controller using a i2c interface. Each sub-block is
+addressed by the host system using different i2c slave address. This document
+describes the bindings for 'pmic' sub-block of max8997.
+
+Required properties:
+- compatible: Should be "maxim,max8997-pmic".
+- reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
+
+- max8997,pmic-buck1-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+  units for buck1 when changing voltage using gpio dvs. Refer to [1] below
+  for additional information.
+
+- max8997,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+  units for buck2 when changing voltage using gpio dvs. Refer to [1] below
+  for additional information.
+
+- max8997,pmic-buck5-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+  units for buck5 when changing voltage using gpio dvs. Refer to [1] below
+  for additional information.
+
+[1] If none of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional
+    property is specified, the 'max8997,pmic-buck[1/2/5]-dvs-voltage'
+    property should specify atleast one voltage level (which would be a
+    safe operating voltage).
+
+    If either of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional
+    property is specified, then all the eigth voltage values for the
+    'max8997,pmic-buck[1/2/5]-dvs-voltage' should be specified.
+
+Optional properties:
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+  the interrupts from max8997 are delivered to.
+- interrupts: Interrupt specifiers for two interrupt sources.
+  - First interrupt specifier is for 'irq1' interrupt.
+  - Second interrupt specifier is for 'alert' interrupt.
+- max8997,pmic-buck1-uses-gpio-dvs: 'buck1' can be controlled by gpio dvs.
+- max8997,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
+- max8997,pmic-buck5-uses-gpio-dvs: 'buck5' can be controlled by gpio dvs.
+
+Additional properties required if either of the optional properties are used:
+- max8997,pmic-ignore-gpiodvs-side-effect: When GPIO-DVS mode is used for
+  multiple bucks, changing the voltage value of one of the bucks may affect
+  that of another buck, which is the side effect of the change (set_voltage).
+  Use this property to ignore such side effects and change the voltage.
+
+- max8997,pmic-buck125-default-dvs-idx: Default voltage setting selected from
+  the possible 8 options selectable by the dvs gpios. The value of this
+  property should be between 0 and 7. If not specified or if out of range, the
+  default value of this property is set to 0.
+
+- max8997,pmic-buck125-dvs-gpios: GPIO specifiers for three host gpio's used
+  for dvs. The format of the gpio specifier depends in the gpio controller.
+
+Regulators: The regulators of max8997 that have to be instantiated should be
+included in a sub-node named 'regulators'. Regulator nodes included in this
+sub-node should be of the format as listed below.
+
+	regulator_name {
+		standard regulator bindings here
+	};
+
+The following are the names of the regulators that the max8997 pmic block
+supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
+as per the datasheet of max8997.
+
+	- LDOn
+		  - valid values for n are 1 to 18 and 21
+		  - Example: LDO0, LD01, LDO2, LDO21
+	- BUCKn
+		  - valid values for n are 1 to 7.
+		  - Example: BUCK1, BUCK2, BUCK3, BUCK7
+
+	- ENVICHG: Battery Charging Current Monitor Output. This is a fixed
+		   voltage type regulator
+
+	- ESAFEOUT1: (ldo19)
+	- ESAFEOUT2: (ld020)
+
+	- CHARGER_CV: main battery charger voltage control
+	- CHARGER: main battery charger current control
+	- CHARGER_TOPOFF: end of charge current threshold level
+
+The bindings inside the regulator nodes use the standard regulator bindings
+which are documented elsewhere.
+
+Example:
+
+	max8997_pmic@66 {
+		compatible = "maxim,max8997-pmic";
+		interrupt-parent = <&wakeup_eint>;
+		reg = <0x66>;
+		interrupts = <4 0>, <3 0>;
+
+		max8997,pmic-buck1-uses-gpio-dvs;
+		max8997,pmic-buck2-uses-gpio-dvs;
+		max8997,pmic-buck5-uses-gpio-dvs;
+
+		max8997,pmic-ignore-gpiodvs-side-effect;
+		max8997,pmic-buck125-default-dvs-idx = <0>;
+
+		max8997,pmic-buck125-dvs-gpios = <&gpx0 0 1 0 0>, /* SET1 */
+						 <&gpx0 1 1 0 0>, /* SET2 */
+						 <&gpx0 2 1 0 0>; /* SET3 */
+
+		max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
+						 <1250000>, <1200000>,
+						 <1150000>, <1100000>,
+						 <1000000>, <950000>;
+
+		max8997,pmic-buck2-dvs-voltage = <1100000>, <1100000>,
+						 <1100000>, <1100000>,
+						 <1000000>, <1000000>,
+						 <1000000>, <1000000>;
+
+		max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>;
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ABB_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDD_ALIVE_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_ARM_1.2V";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c
index f123517065ec..abd5c80c7cf5 100644
--- a/drivers/mfd/max8997.c
+++ b/drivers/mfd/max8997.c
@@ -21,8 +21,10 @@
  * This driver is based on max8998.c
  */
 
+#include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
+#include <linux/of_irq.h>
 #include <linux/interrupt.h>
 #include <linux/pm_runtime.h>
 #include <linux/module.h>
@@ -47,6 +49,13 @@ static struct mfd_cell max8997_devs[] = {
 	{ .name = "max8997-led", .id = 2 },
 };
 
+#ifdef CONFIG_OF
+static struct of_device_id __devinitdata max8997_pmic_dt_match[] = {
+	{ .compatible = "maxim,max8997-pmic", .data = TYPE_MAX8997 },
+	{},
+};
+#endif
+
 int max8997_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest)
 {
 	struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
@@ -123,6 +132,58 @@ int max8997_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask)
 }
 EXPORT_SYMBOL_GPL(max8997_update_reg);
 
+#ifdef CONFIG_OF
+/*
+ * Only the common platform data elements for max8997 are parsed here from the
+ * device tree. Other sub-modules of max8997 such as pmic, rtc and others have
+ * to parse their own platform data elements from device tree.
+ *
+ * The max8997 platform data structure is instantiated here and the drivers for
+ * the sub-modules need not instantiate another instance while parsing their
+ * platform data.
+ */
+static struct max8997_platform_data *max8997_i2c_parse_dt_pdata(
+					struct device *dev)
+{
+	struct max8997_platform_data *pd;
+
+	pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
+	if (!pd) {
+		dev_err(dev, "could not allocate memory for pdata\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	pd->ono = irq_of_parse_and_map(dev->of_node, 1);
+
+	/*
+	 * ToDo: the 'wakeup' member in the platform data is more of a linux
+	 * specfic information. Hence, there is no binding for that yet and
+	 * not parsed here.
+	 */
+
+	return pd;
+}
+#else
+static struct max8997_platform_data *max8997_i2c_parse_dt_pdata(
+					struct device *dev)
+{
+	return 0;
+}
+#endif
+
+static inline int max8997_i2c_get_driver_data(struct i2c_client *i2c,
+						const struct i2c_device_id *id)
+{
+#ifdef CONFIG_OF
+	if (i2c->dev.of_node) {
+		const struct of_device_id *match;
+		match = of_match_node(max8997_pmic_dt_match, i2c->dev.of_node);
+		return (int)match->data;
+	}
+#endif
+	return (int)id->driver_data;
+}
+
 static int max8997_i2c_probe(struct i2c_client *i2c,
 			    const struct i2c_device_id *id)
 {
@@ -137,12 +198,21 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
 	i2c_set_clientdata(i2c, max8997);
 	max8997->dev = &i2c->dev;
 	max8997->i2c = i2c;
-	max8997->type = id->driver_data;
+	max8997->type = max8997_i2c_get_driver_data(i2c, id);
 	max8997->irq = i2c->irq;
 
+	if (max8997->dev->of_node) {
+		pdata = max8997_i2c_parse_dt_pdata(max8997->dev);
+		if (IS_ERR(pdata)) {
+			ret = PTR_ERR(pdata);
+			goto err;
+		}
+	}
+
 	if (!pdata)
 		goto err;
 
+	max8997->pdata = pdata;
 	max8997->ono = pdata->ono;
 
 	mutex_init(&max8997->iolock);
@@ -434,6 +504,7 @@ static struct i2c_driver max8997_i2c_driver = {
 		   .name = "max8997",
 		   .owner = THIS_MODULE,
 		   .pm = &max8997_pm,
+		   .of_match_table = of_match_ptr(max8997_pmic_dt_match),
 	},
 	.probe = max8997_i2c_probe,
 	.remove = max8997_i2c_remove,
diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c
index cea9ec9093eb..df0eafb0dc7e 100644
--- a/drivers/regulator/max8997.c
+++ b/drivers/regulator/max8997.c
@@ -24,6 +24,7 @@
 #include <linux/bug.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
+#include <linux/of_gpio.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
@@ -31,6 +32,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/mfd/max8997.h>
 #include <linux/mfd/max8997-private.h>
+#include <linux/regulator/of_regulator.h>
 
 struct max8997_data {
 	struct device *dev;
@@ -933,22 +935,163 @@ static struct regulator_desc regulators[] = {
 				  max8997_charger_fixedstate_ops),
 };
 
+#ifdef CONFIG_OF
+static int max8997_pmic_dt_parse_dvs_gpio(struct max8997_dev *iodev,
+			struct max8997_platform_data *pdata,
+			struct device_node *pmic_np)
+{
+	int i, gpio;
+
+	for (i = 0; i < 3; i++) {
+		gpio = of_get_named_gpio(pmic_np,
+					"max8997,pmic-buck125-dvs-gpios", i);
+		if (!gpio_is_valid(gpio)) {
+			dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio);
+			return -EINVAL;
+		}
+		pdata->buck125_gpios[i] = gpio;
+	}
+	return 0;
+}
+
+static int max8997_pmic_dt_parse_pdata(struct max8997_dev *iodev,
+					struct max8997_platform_data *pdata)
+{
+	struct device_node *pmic_np, *regulators_np, *reg_np;
+	struct max8997_regulator_data *rdata;
+	unsigned int i, dvs_voltage_nr = 1, ret;
+
+	pmic_np = iodev->dev->of_node;
+	if (!pmic_np) {
+		dev_err(iodev->dev, "could not find pmic sub-node\n");
+		return -ENODEV;
+	}
+
+	regulators_np = of_find_node_by_name(pmic_np, "regulators");
+	if (!regulators_np) {
+		dev_err(iodev->dev, "could not find regulators sub-node\n");
+		return -EINVAL;
+	}
+
+	/* count the number of regulators to be supported in pmic */
+	pdata->num_regulators = 0;
+	for_each_child_of_node(regulators_np, reg_np)
+		pdata->num_regulators++;
+
+	rdata = devm_kzalloc(iodev->dev, sizeof(*rdata) *
+				pdata->num_regulators, GFP_KERNEL);
+	if (!rdata) {
+		dev_err(iodev->dev, "could not allocate memory for "
+						"regulator data\n");
+		return -ENOMEM;
+	}
+
+	pdata->regulators = rdata;
+	for_each_child_of_node(regulators_np, reg_np) {
+		for (i = 0; i < ARRAY_SIZE(regulators); i++)
+			if (!of_node_cmp(reg_np->name, regulators[i].name))
+				break;
+
+		if (i == ARRAY_SIZE(regulators)) {
+			dev_warn(iodev->dev, "don't know how to configure "
+				"regulator %s\n", reg_np->name);
+			continue;
+		}
+
+		rdata->id = i;
+		rdata->initdata = of_get_regulator_init_data(
+						iodev->dev, reg_np);
+		rdata->reg_node = reg_np;
+		rdata++;
+	}
+
+	if (of_get_property(pmic_np, "max8997,pmic-buck1-uses-gpio-dvs", NULL))
+		pdata->buck1_gpiodvs = true;
+
+	if (of_get_property(pmic_np, "max8997,pmic-buck2-uses-gpio-dvs", NULL))
+		pdata->buck2_gpiodvs = true;
+
+	if (of_get_property(pmic_np, "max8997,pmic-buck5-uses-gpio-dvs", NULL))
+		pdata->buck5_gpiodvs = true;
+
+	if (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs ||
+						pdata->buck5_gpiodvs) {
+		ret = max8997_pmic_dt_parse_dvs_gpio(iodev, pdata, pmic_np);
+		if (ret)
+			return -EINVAL;
+
+		if (of_property_read_u32(pmic_np,
+				"max8997,pmic-buck125-default-dvs-idx",
+				&pdata->buck125_default_idx)) {
+			pdata->buck125_default_idx = 0;
+		} else {
+			if (pdata->buck125_default_idx >= 8) {
+				pdata->buck125_default_idx = 0;
+				dev_info(iodev->dev, "invalid value for "
+				"default dvs index, using 0 instead\n");
+			}
+		}
+
+		if (of_get_property(pmic_np,
+			"max8997,pmic-ignore-gpiodvs-side-effect", NULL))
+			pdata->ignore_gpiodvs_side_effect = true;
+
+		dvs_voltage_nr = 8;
+	}
+
+	if (of_property_read_u32_array(pmic_np,
+				"max8997,pmic-buck1-dvs-voltage",
+				pdata->buck1_voltage, dvs_voltage_nr)) {
+		dev_err(iodev->dev, "buck1 voltages not specified\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32_array(pmic_np,
+				"max8997,pmic-buck2-dvs-voltage",
+				pdata->buck2_voltage, dvs_voltage_nr)) {
+		dev_err(iodev->dev, "buck2 voltages not specified\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32_array(pmic_np,
+				"max8997,pmic-buck5-dvs-voltage",
+				pdata->buck5_voltage, dvs_voltage_nr)) {
+		dev_err(iodev->dev, "buck5 voltages not specified\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+#else
+static int max8997_pmic_dt_parse_pdata(struct max8997_dev *iodev,
+					struct max8997_platform_data *pdata)
+{
+	return 0;
+}
+#endif /* CONFIG_OF */
+
 static int max8997_pmic_probe(struct platform_device *pdev)
 {
 	struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
-	struct max8997_platform_data *pdata = dev_get_platdata(iodev->dev);
+	struct max8997_platform_data *pdata = iodev->pdata;
 	struct regulator_config config = { };
 	struct regulator_dev **rdev;
 	struct max8997_data *max8997;
 	struct i2c_client *i2c;
-	int i, ret, size;
+	int i, ret, size, nr_dvs;
 	u8 max_buck1 = 0, max_buck2 = 0, max_buck5 = 0;
 
-	if (!pdata) {
+	if (IS_ERR_OR_NULL(pdata)) {
 		dev_err(pdev->dev.parent, "No platform init data supplied.\n");
 		return -ENODEV;
 	}
 
+	if (iodev->dev->of_node) {
+		ret = max8997_pmic_dt_parse_pdata(iodev, pdata);
+		if (ret)
+			return ret;
+	}
+
 	max8997 = devm_kzalloc(&pdev->dev, sizeof(struct max8997_data),
 			       GFP_KERNEL);
 	if (!max8997)
@@ -973,7 +1116,10 @@ static int max8997_pmic_probe(struct platform_device *pdev)
 	memcpy(max8997->buck125_gpios, pdata->buck125_gpios, sizeof(int) * 3);
 	max8997->ignore_gpiodvs_side_effect = pdata->ignore_gpiodvs_side_effect;
 
-	for (i = 0; i < 8; i++) {
+	nr_dvs = (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs ||
+			pdata->buck5_gpiodvs) ? 8 : 1;
+
+	for (i = 0; i < nr_dvs; i++) {
 		max8997->buck1_vol[i] = ret =
 			max8997_get_voltage_proper_val(
 					&buck1245_voltage_map_desc,
@@ -1019,6 +1165,19 @@ static int max8997_pmic_probe(struct platform_device *pdev)
 				max_buck5, 0x3f);
 	}
 
+	/* Initialize all the DVS related BUCK registers */
+	for (i = 0; i < nr_dvs; i++) {
+		max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS1 + i,
+				max8997->buck1_vol[i],
+				0x3f);
+		max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS1 + i,
+				max8997->buck2_vol[i],
+				0x3f);
+		max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS1 + i,
+				max8997->buck5_vol[i],
+				0x3f);
+	}
+
 	/*
 	 * If buck 1, 2, and 5 do not care DVS GPIO settings, ignore them.
 	 * If at least one of them cares, set gpios.
@@ -1068,19 +1227,6 @@ static int max8997_pmic_probe(struct platform_device *pdev)
 	max8997_update_reg(i2c, MAX8997_REG_BUCK5CTRL, (pdata->buck5_gpiodvs) ?
 			(1 << 1) : (0 << 1), 1 << 1);
 
-	/* Initialize all the DVS related BUCK registers */
-	for (i = 0; i < 8; i++) {
-		max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS1 + i,
-				max8997->buck1_vol[i],
-				0x3f);
-		max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS1 + i,
-				max8997->buck2_vol[i],
-				0x3f);
-		max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS1 + i,
-				max8997->buck5_vol[i],
-				0x3f);
-	}
-
 	/* Misc Settings */
 	max8997->ramp_delay = 10; /* set 10mV/us, which is the default */
 	max8997_write_reg(i2c, MAX8997_REG_BUCKRAMP, (0xf << 4) | 0x9);
@@ -1101,6 +1247,7 @@ static int max8997_pmic_probe(struct platform_device *pdev)
 		config.dev = max8997->dev;
 		config.init_data = pdata->regulators[i].initdata;
 		config.driver_data = max8997;
+		config.of_node = pdata->regulators[i].reg_node;
 
 		rdev[i] = regulator_register(&regulators[id], &config);
 		if (IS_ERR(rdev[i])) {
diff --git a/include/linux/mfd/max8997-private.h b/include/linux/mfd/max8997-private.h
index 830152cfae33..6ae21bf47d64 100644
--- a/include/linux/mfd/max8997-private.h
+++ b/include/linux/mfd/max8997-private.h
@@ -316,6 +316,7 @@ enum max8997_irq {
 #define MAX8997_NUM_GPIO	12
 struct max8997_dev {
 	struct device *dev;
+	struct max8997_platform_data *pdata;
 	struct i2c_client *i2c; /* 0xcc / PMIC, Battery Control, and FLASH */
 	struct i2c_client *rtc; /* slave addr 0x0c */
 	struct i2c_client *haptic; /* slave addr 0x90 */
diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h
index 328d8e24b533..1d4a4fe6ac33 100644
--- a/include/linux/mfd/max8997.h
+++ b/include/linux/mfd/max8997.h
@@ -75,6 +75,7 @@ enum max8998_regulators {
 struct max8997_regulator_data {
 	int id;
 	struct regulator_init_data *initdata;
+	struct device_node *reg_node;
 };
 
 enum max8997_muic_usb_type {