dpll: extend uapi by lock status error attribute

If the dpll devices goes to state "unlocked" or "holdover", it may be
caused by an error. In that case, allow user to see what the error was.
Introduce a new attribute and values it can carry.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

2 files changed, 69 insertions, 0 deletions

diff --git a/Documentation/netlink/specs/dpll.yaml b/Documentation/netlink/specs/dpll.yaml
index b14aed18065f..1755066d8308 100644
--- a/Documentation/netlink/specs/dpll.yaml
+++ b/Documentation/netlink/specs/dpll.yaml
@@ -52,6 +52,40 @@ definitions:
           dpll's lock-state shall remain DPLL_LOCK_STATUS_UNLOCKED)
     render-max: true
   -
+    type: enum
+    name: lock-status-error
+    doc: |
+      if previous status change was done due to a failure, this provides
+      information of dpll device lock status error.
+      Valid values for DPLL_A_LOCK_STATUS_ERROR attribute
+    entries:
+      -
+        name: none
+        doc: |
+          dpll device lock status was changed without any error
+        value: 1
+      -
+        name: undefined
+        doc: |
+          dpll device lock status was changed due to undefined error.
+          Driver fills this value up in case it is not able
+          to obtain suitable exact error type.
+      -
+        name: media-down
+        doc: |
+          dpll device lock status was changed because of associated
+          media got down.
+          This may happen for example if dpll device was previously
+          locked on an input pin of type PIN_TYPE_SYNCE_ETH_PORT.
+      -
+        name: fractional-frequency-offset-too-high
+        doc: |
+          the FFO (Fractional Frequency Offset) between the RX and TX
+          symbol rate on the media got too high.
+          This may happen for example if dpll device was previously
+          locked on an input pin of type PIN_TYPE_SYNCE_ETH_PORT.
+    render-max: true
+  -
     type: const
     name: temp-divider
     value: 1000
@@ -214,6 +248,10 @@ attribute-sets:
         name: type
         type: u32
         enum: type
+      -
+        name: lock-status-error
+        type: u32
+        enum: lock-status-error
   -
     name: pin
     enum-name: dpll_a_pin
@@ -379,6 +417,7 @@ operations:
             - mode
             - mode-supported
             - lock-status
+            - lock-status-error
             - temp
             - clock-id
             - type
diff --git a/include/uapi/linux/dpll.h b/include/uapi/linux/dpll.h
index b4e947f9bfbc..0c13d7f1a1bc 100644
--- a/include/uapi/linux/dpll.h
+++ b/include/uapi/linux/dpll.h
@@ -50,6 +50,35 @@ enum dpll_lock_status {
 	DPLL_LOCK_STATUS_MAX = (__DPLL_LOCK_STATUS_MAX - 1)
 };
 
+/**
+ * enum dpll_lock_status_error - if previous status change was done due to a
+ *   failure, this provides information of dpll device lock status error. Valid
+ *   values for DPLL_A_LOCK_STATUS_ERROR attribute
+ * @DPLL_LOCK_STATUS_ERROR_NONE: dpll device lock status was changed without
+ *   any error
+ * @DPLL_LOCK_STATUS_ERROR_UNDEFINED: dpll device lock status was changed due
+ *   to undefined error. Driver fills this value up in case it is not able to
+ *   obtain suitable exact error type.
+ * @DPLL_LOCK_STATUS_ERROR_MEDIA_DOWN: dpll device lock status was changed
+ *   because of associated media got down. This may happen for example if dpll
+ *   device was previously locked on an input pin of type
+ *   PIN_TYPE_SYNCE_ETH_PORT.
+ * @DPLL_LOCK_STATUS_ERROR_FRACTIONAL_FREQUENCY_OFFSET_TOO_HIGH: the FFO
+ *   (Fractional Frequency Offset) between the RX and TX symbol rate on the
+ *   media got too high. This may happen for example if dpll device was
+ *   previously locked on an input pin of type PIN_TYPE_SYNCE_ETH_PORT.
+ */
+enum dpll_lock_status_error {
+	DPLL_LOCK_STATUS_ERROR_NONE = 1,
+	DPLL_LOCK_STATUS_ERROR_UNDEFINED,
+	DPLL_LOCK_STATUS_ERROR_MEDIA_DOWN,
+	DPLL_LOCK_STATUS_ERROR_FRACTIONAL_FREQUENCY_OFFSET_TOO_HIGH,
+
+	/* private: */
+	__DPLL_LOCK_STATUS_ERROR_MAX,
+	DPLL_LOCK_STATUS_ERROR_MAX = (__DPLL_LOCK_STATUS_ERROR_MAX - 1)
+};
+
 #define DPLL_TEMP_DIVIDER	1000
 
 /**
@@ -150,6 +179,7 @@ enum dpll_a {
 	DPLL_A_LOCK_STATUS,
 	DPLL_A_TEMP,
 	DPLL_A_TYPE,
+	DPLL_A_LOCK_STATUS_ERROR,
 
 	__DPLL_A_MAX,
 	DPLL_A_MAX = (__DPLL_A_MAX - 1)