summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-06-18 18:06:49 +0200
committerLinus Torvalds <torvalds@linux-foundation.org>2016-06-18 18:06:49 +0200
commite80dac114c63dd54398c3c785a6431622c320e87 (patch)
tree2a49ad6be601be3463172082bd61bdde863753e9
parentMerge tag 'staging-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/... (diff)
parentusbip: rate limit get_frame_number message (diff)
downloadlinux-e80dac114c63dd54398c3c785a6431622c320e87.tar.xz
linux-e80dac114c63dd54398c3c785a6431622c320e87.zip
Merge tag 'usb-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH: "Here are a bunch (65) of USB fixes for 4.7-rc4. Sorry about the quantity, I've been slow in getting these out. The majority are the "normal" gadget, musb, and xhci fixes, that we all are used to. There are also a few other tiny fixes resolving a number of reported issues that showed up in 4.7-rc1. All of these have been in linux-next" * tag 'usb-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (65 commits) usbip: rate limit get_frame_number message usb: musb: sunxi: Remove bogus "Frees glue" comment usb: musb: sunxi: Fix NULL ptr deref when gadget is registered before musb usb: echi-hcd: Add ehci_setup check before echi_shutdown usb: host: ehci-msm: Conditionally call ehci suspend/resume MAINTAINERS: Add file patterns for usb device tree bindings usb: host: ehci-tegra: Avoid getting the same reset twice usb: host: ehci-tegra: Grab the correct UTMI pads reset USB: mos7720: delete parport USB: OHCI: Don't mark EDs as ED_OPER if scheduling fails phy: ti-pipe3: Program the DPLL even if it was already locked usb: musb: Stop bulk endpoint while queue is rotated usb: musb: Ensure rx reinit occurs for shared_fifo endpoints usb: musb: host: correct cppi dma channel for isoch transfer usb: musb: only restore devctl when session was set in backup usb: phy: Check initial state for twl6030 usb: musb: Use normal module_init for 2430 glue usb: musb: Remove pm_runtime_set_irq_safe usb: musb: Remove extra PM runtime calls from 2430 glue layer usb: musb: Return error value from musb_mailbox ...
-rw-r--r--Documentation/ABI/testing/configfs-usb-gadget-uvc58
-rw-r--r--MAINTAINERS1
-rw-r--r--drivers/phy/phy-exynos-mipi-video.c6
-rw-r--r--drivers/phy/phy-ti-pipe3.c15
-rw-r--r--drivers/phy/phy-twl4030-usb.c14
-rw-r--r--drivers/usb/core/quirks.c23
-rw-r--r--drivers/usb/dwc2/core.h27
-rw-r--r--drivers/usb/dwc2/gadget.c24
-rw-r--r--drivers/usb/dwc3/core.h1
-rw-r--r--drivers/usb/dwc3/dwc3-exynos.c19
-rw-r--r--drivers/usb/dwc3/dwc3-st.c10
-rw-r--r--drivers/usb/dwc3/gadget.c30
-rw-r--r--drivers/usb/gadget/composite.c21
-rw-r--r--drivers/usb/gadget/configfs.c1
-rw-r--r--drivers/usb/gadget/function/f_fs.c30
-rw-r--r--drivers/usb/gadget/function/f_printer.c8
-rw-r--r--drivers/usb/gadget/function/f_tcm.c20
-rw-r--r--drivers/usb/gadget/function/f_uac2.c13
-rw-r--r--drivers/usb/gadget/function/storage_common.c4
-rw-r--r--drivers/usb/gadget/legacy/inode.c17
-rw-r--r--drivers/usb/gadget/udc/udc-core.c12
-rw-r--r--drivers/usb/host/ehci-hcd.c9
-rw-r--r--drivers/usb/host/ehci-hub.c14
-rw-r--r--drivers/usb/host/ehci-msm.c14
-rw-r--r--drivers/usb/host/ehci-tegra.c16
-rw-r--r--drivers/usb/host/ohci-q.c3
-rw-r--r--drivers/usb/host/xhci-pci.c5
-rw-r--r--drivers/usb/host/xhci-plat.c3
-rw-r--r--drivers/usb/host/xhci-ring.c30
-rw-r--r--drivers/usb/host/xhci.c29
-rw-r--r--drivers/usb/musb/musb_core.c85
-rw-r--r--drivers/usb/musb/musb_core.h3
-rw-r--r--drivers/usb/musb/musb_gadget.c34
-rw-r--r--drivers/usb/musb/musb_host.c68
-rw-r--r--drivers/usb/musb/omap2430.c257
-rw-r--r--drivers/usb/musb/sunxi.c54
-rw-r--r--drivers/usb/phy/phy-twl6030-usb.c29
-rw-r--r--drivers/usb/serial/mos7720.c1
-rw-r--r--drivers/usb/storage/uas.c2
-rw-r--r--drivers/usb/usbip/vhci_hcd.c2
-rw-r--r--include/linux/usb/gadget.h3
-rw-r--r--include/linux/usb/musb.h5
42 files changed, 573 insertions, 447 deletions
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uvc b/Documentation/ABI/testing/configfs-usb-gadget-uvc
index 2f4a0051b32d..1ba0d0fda9c0 100644
--- a/Documentation/ABI/testing/configfs-usb-gadget-uvc
+++ b/Documentation/ABI/testing/configfs-usb-gadget-uvc
@@ -1,6 +1,6 @@
What: /config/usb-gadget/gadget/functions/uvc.name
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: UVC function directory
streaming_maxburst - 0..15 (ss only)
@@ -9,37 +9,37 @@ Description: UVC function directory
What: /config/usb-gadget/gadget/functions/uvc.name/control
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Control descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/control/class
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Class descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/control/class/ss
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Super speed control class descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/control/class/fs
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Full speed control class descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Terminal descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal/output
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Output terminal descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal/output/default
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Default output terminal descriptors
All attributes read only:
@@ -53,12 +53,12 @@ Description: Default output terminal descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal/camera
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Camera terminal descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal/camera/default
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Default camera terminal descriptors
All attributes read only:
@@ -75,12 +75,12 @@ Description: Default camera terminal descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/control/processing
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Processing unit descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/control/processing/default
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Default processing unit descriptors
All attributes read only:
@@ -94,49 +94,49 @@ Description: Default processing unit descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/control/header
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Control header descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/control/header/name
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Specific control header descriptors
dwClockFrequency
bcdUVC
What: /config/usb-gadget/gadget/functions/uvc.name/streaming
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Streaming descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/class
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Streaming class descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/class/ss
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Super speed streaming class descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/class/hs
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: High speed streaming class descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/class/fs
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Full speed streaming class descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/color_matching
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Color matching descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/color_matching/default
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Default color matching descriptors
All attributes read only:
@@ -150,12 +150,12 @@ Description: Default color matching descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: MJPEG format descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg/name
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Specific MJPEG format descriptors
All attributes read only,
@@ -174,7 +174,7 @@ Description: Specific MJPEG format descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg/name/name
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Specific MJPEG frame descriptors
dwFrameInterval - indicates how frame interval can be
@@ -196,12 +196,12 @@ Description: Specific MJPEG frame descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Uncompressed format descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed/name
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Specific uncompressed format descriptors
bmaControls - this format's data for bmaControls in
@@ -221,7 +221,7 @@ Description: Specific uncompressed format descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed/name/name
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Specific uncompressed frame descriptors
dwFrameInterval - indicates how frame interval can be
@@ -243,12 +243,12 @@ Description: Specific uncompressed frame descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/header
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Streaming header descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/header/name
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Specific streaming header descriptors
All attributes read only:
diff --git a/MAINTAINERS b/MAINTAINERS
index b697a03e307a..2bfc987a8c30 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11975,6 +11975,7 @@ L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
S: Supported
+F: Documentation/devicetree/bindings/usb/
F: Documentation/usb/
F: drivers/usb/
F: include/linux/usb.h
diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c
index cc093ebfda94..8b851f718123 100644
--- a/drivers/phy/phy-exynos-mipi-video.c
+++ b/drivers/phy/phy-exynos-mipi-video.c
@@ -233,8 +233,12 @@ static inline int __is_running(const struct exynos_mipi_phy_desc *data,
struct exynos_mipi_video_phy *state)
{
u32 val;
+ int ret;
+
+ ret = regmap_read(state->regmaps[data->resetn_map], data->resetn_reg, &val);
+ if (ret)
+ return 0;
- regmap_read(state->regmaps[data->resetn_map], data->resetn_reg, &val);
return val & data->resetn_val;
}
diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
index 0a477d24cf76..bf46844dc387 100644
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/phy-ti-pipe3.c
@@ -293,11 +293,18 @@ static int ti_pipe3_init(struct phy *x)
ret = ti_pipe3_dpll_wait_lock(phy);
}
- /* Program the DPLL only if not locked */
+ /* SATA has issues if re-programmed when locked */
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
- if (!(val & PLL_LOCK))
- if (ti_pipe3_dpll_program(phy))
- return -EINVAL;
+ if ((val & PLL_LOCK) && of_device_is_compatible(phy->dev->of_node,
+ "ti,phy-pipe3-sata"))
+ return ret;
+
+ /* Program the DPLL */
+ ret = ti_pipe3_dpll_program(phy);
+ if (ret) {
+ ti_pipe3_disable_clocks(phy);
+ return -EINVAL;
+ }
return ret;
}
diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
index 6b6af6cba454..d9b10a39a2cf 100644
--- a/drivers/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -463,7 +463,8 @@ static int twl4030_phy_power_on(struct phy *phy)
twl4030_usb_set_mode(twl, twl->usb_mode);
if (twl->usb_mode == T2_USB_MODE_ULPI)
twl4030_i2c_access(twl, 0);
- schedule_delayed_work(&twl->id_workaround_work, 0);
+ twl->linkstat = MUSB_UNKNOWN;
+ schedule_delayed_work(&twl->id_workaround_work, HZ);
return 0;
}
@@ -537,6 +538,7 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
struct twl4030_usb *twl = _twl;
enum musb_vbus_id_status status;
bool status_changed = false;
+ int err;
status = twl4030_usb_linkstat(twl);
@@ -567,7 +569,9 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
pm_runtime_mark_last_busy(twl->dev);
pm_runtime_put_autosuspend(twl->dev);
}
- musb_mailbox(status);
+ err = musb_mailbox(status);
+ if (err)
+ twl->linkstat = MUSB_UNKNOWN;
}
/* don't schedule during sleep - irq works right then */
@@ -595,7 +599,8 @@ static int twl4030_phy_init(struct phy *phy)
struct twl4030_usb *twl = phy_get_drvdata(phy);
pm_runtime_get_sync(twl->dev);
- schedule_delayed_work(&twl->id_workaround_work, 0);
+ twl->linkstat = MUSB_UNKNOWN;
+ schedule_delayed_work(&twl->id_workaround_work, HZ);
pm_runtime_mark_last_busy(twl->dev);
pm_runtime_put_autosuspend(twl->dev);
@@ -763,7 +768,8 @@ static int twl4030_usb_remove(struct platform_device *pdev)
if (cable_present(twl->linkstat))
pm_runtime_put_noidle(twl->dev);
pm_runtime_mark_last_busy(twl->dev);
- pm_runtime_put_sync_suspend(twl->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+ pm_runtime_put_sync(twl->dev);
pm_runtime_disable(twl->dev);
/* autogate 60MHz ULPI clock,
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 6dc810bce295..944a6dca0fcb 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -44,6 +44,9 @@ static const struct usb_device_id usb_quirk_list[] = {
/* Creative SB Audigy 2 NX */
{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* USB3503 */
+ { USB_DEVICE(0x0424, 0x3503), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Microsoft Wireless Laser Mouse 6000 Receiver */
{ USB_DEVICE(0x045e, 0x00e1), .driver_info = USB_QUIRK_RESET_RESUME },
@@ -173,6 +176,10 @@ static const struct usb_device_id usb_quirk_list[] = {
/* MAYA44USB sound device */
{ USB_DEVICE(0x0a92, 0x0091), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* ASUS Base Station(T100) */
+ { USB_DEVICE(0x0b05, 0x17e0), .driver_info =
+ USB_QUIRK_IGNORE_REMOTE_WAKEUP },
+
/* Action Semiconductor flash disk */
{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
USB_QUIRK_STRING_FETCH_255 },
@@ -188,26 +195,22 @@ static const struct usb_device_id usb_quirk_list[] = {
{ USB_DEVICE(0x1908, 0x1315), .driver_info =
USB_QUIRK_HONOR_BNUMINTERFACES },
- /* INTEL VALUE SSD */
- { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
-
- /* USB3503 */
- { USB_DEVICE(0x0424, 0x3503), .driver_info = USB_QUIRK_RESET_RESUME },
-
- /* ASUS Base Station(T100) */
- { USB_DEVICE(0x0b05, 0x17e0), .driver_info =
- USB_QUIRK_IGNORE_REMOTE_WAKEUP },
-
/* Protocol and OTG Electrical Test Device */
{ USB_DEVICE(0x1a0a, 0x0200), .driver_info =
USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
+ /* Acer C120 LED Projector */
+ { USB_DEVICE(0x1de1, 0xc102), .driver_info = USB_QUIRK_NO_LPM },
+
/* Blackmagic Design Intensity Shuttle */
{ USB_DEVICE(0x1edb, 0xbd3b), .driver_info = USB_QUIRK_NO_LPM },
/* Blackmagic Design UltraStudio SDI */
{ USB_DEVICE(0x1edb, 0xbd4f), .driver_info = USB_QUIRK_NO_LPM },
+ /* INTEL VALUE SSD */
+ { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
+
{ } /* terminating entry must be last */
};
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 3c58d633ce80..dec0b21fc626 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -64,6 +64,17 @@
DWC2_TRACE_SCHEDULER_VB(pr_fmt("%s: SCH: " fmt), \
dev_name(hsotg->dev), ##__VA_ARGS__)
+#ifdef CONFIG_MIPS
+/*
+ * There are some MIPS machines that can run in either big-endian
+ * or little-endian mode and that use the dwc2 register without
+ * a byteswap in both ways.
+ * Unlike other architectures, MIPS apparently does not require a
+ * barrier before the __raw_writel() to synchronize with DMA but does
+ * require the barrier after the __raw_writel() to serialize a set of
+ * writes. This set of operations was added specifically for MIPS and
+ * should only be used there.
+ */
static inline u32 dwc2_readl(const void __iomem *addr)
{
u32 value = __raw_readl(addr);
@@ -90,6 +101,22 @@ static inline void dwc2_writel(u32 value, void __iomem *addr)
pr_info("INFO:: wrote %08x to %p\n", value, addr);
#endif
}
+#else
+/* Normal architectures just use readl/write */
+static inline u32 dwc2_readl(const void __iomem *addr)
+{
+ return readl(addr);
+}
+
+static inline void dwc2_writel(u32 value, void __iomem *addr)
+{
+ writel(value, addr);
+
+#ifdef DWC2_LOG_WRITES
+ pr_info("info:: wrote %08x to %p\n", value, addr);
+#endif
+}
+#endif
/* Maximum number of Endpoints/HostChannels */
#define MAX_EPS_CHANNELS 16
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 4c5e3005e1dc..26cf09d0fe3c 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -1018,7 +1018,7 @@ static int dwc2_hsotg_process_req_status(struct dwc2_hsotg *hsotg,
return 1;
}
-static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value);
+static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value, bool now);
/**
* get_ep_head - return the first request on the endpoint
@@ -1094,7 +1094,7 @@ static int dwc2_hsotg_process_req_feature(struct dwc2_hsotg *hsotg,
case USB_ENDPOINT_HALT:
halted = ep->halted;
- dwc2_hsotg_ep_sethalt(&ep->ep, set);
+ dwc2_hsotg_ep_sethalt(&ep->ep, set, true);
ret = dwc2_hsotg_send_reply(hsotg, ep0, NULL, 0);
if (ret) {
@@ -2948,8 +2948,13 @@ static int dwc2_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
* dwc2_hsotg_ep_sethalt - set halt on a given endpoint
* @ep: The endpoint to set halt.
* @value: Set or unset the halt.
+ * @now: If true, stall the endpoint now. Otherwise return -EAGAIN if
+ * the endpoint is busy processing requests.
+ *
+ * We need to stall the endpoint immediately if request comes from set_feature
+ * protocol command handler.
*/
-static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value)
+static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value, bool now)
{
struct dwc2_hsotg_ep *hs_ep = our_ep(ep);
struct dwc2_hsotg *hs = hs_ep->parent;
@@ -2969,6 +2974,17 @@ static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value)
return 0;
}
+ if (hs_ep->isochronous) {
+ dev_err(hs->dev, "%s is Isochronous Endpoint\n", ep->name);
+ return -EINVAL;
+ }
+
+ if (!now && value && !list_empty(&hs_ep->queue)) {
+ dev_dbg(hs->dev, "%s request is pending, cannot halt\n",
+ ep->name);
+ return -EAGAIN;
+ }
+
if (hs_ep->dir_in) {
epreg = DIEPCTL(index);
epctl = dwc2_readl(hs->regs + epreg);
@@ -3020,7 +3036,7 @@ static int dwc2_hsotg_ep_sethalt_lock(struct usb_ep *ep, int value)
int ret = 0;
spin_lock_irqsave(&hs->lock, flags);
- ret = dwc2_hsotg_ep_sethalt(ep, value);
+ ret = dwc2_hsotg_ep_sethalt(ep, value, false);
spin_unlock_irqrestore(&hs->lock, flags);
return ret;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 7ddf9449a063..654050684f4f 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -402,6 +402,7 @@
#define DWC3_DEPCMD_GET_RSC_IDX(x) (((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f)
#define DWC3_DEPCMD_STATUS(x) (((x) >> 12) & 0x0F)
#define DWC3_DEPCMD_HIPRI_FORCERM (1 << 11)
+#define DWC3_DEPCMD_CLEARPENDIN (1 << 11)
#define DWC3_DEPCMD_CMDACT (1 << 10)
#define DWC3_DEPCMD_CMDIOC (1 << 8)
diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index dd5cb5577dca..2f1fb7e7aa54 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -128,12 +128,6 @@ static int dwc3_exynos_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, exynos);
- ret = dwc3_exynos_register_phys(exynos);
- if (ret) {
- dev_err(dev, "couldn't register PHYs\n");
- return ret;
- }
-
exynos->dev = dev;
exynos->clk = devm_clk_get(dev, "usbdrd30");
@@ -183,20 +177,29 @@ static int dwc3_exynos_probe(struct platform_device *pdev)
goto err3;
}
+ ret = dwc3_exynos_register_phys(exynos);
+ if (ret) {
+ dev_err(dev, "couldn't register PHYs\n");
+ goto err4;
+ }
+
if (node) {
ret = of_platform_populate(node, NULL, NULL, dev);
if (ret) {
dev_err(dev, "failed to add dwc3 core\n");
- goto err4;
+ goto err5;
}
} else {
dev_err(dev, "no device node, failed to add dwc3 core\n");
ret = -ENODEV;
- goto err4;
+ goto err5;
}
return 0;
+err5:
+ platform_device_unregister(exynos->usb2_phy);
+ platform_device_unregister(exynos->usb3_phy);
err4:
regulator_disable(exynos->vdd10);
err3:
diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c
index 5c0adb9c6fb2..50d6ae6f88bc 100644
--- a/drivers/usb/dwc3/dwc3-st.c
+++ b/drivers/usb/dwc3/dwc3-st.c
@@ -129,12 +129,18 @@ static int st_dwc3_drd_init(struct st_dwc3 *dwc3_data)
switch (dwc3_data->dr_mode) {
case USB_DR_MODE_PERIPHERAL:
- val &= ~(USB3_FORCE_VBUSVALID | USB3_DELAY_VBUSVALID
+ val &= ~(USB3_DELAY_VBUSVALID
| USB3_SEL_FORCE_OPMODE | USB3_FORCE_OPMODE(0x3)
| USB3_SEL_FORCE_DPPULLDOWN2 | USB3_FORCE_DPPULLDOWN2
| USB3_SEL_FORCE_DMPULLDOWN2 | USB3_FORCE_DMPULLDOWN2);
- val |= USB3_DEVICE_NOT_HOST;
+ /*
+ * USB3_PORT2_FORCE_VBUSVALID When '1' and when
+ * USB3_PORT2_DEVICE_NOT_HOST = 1, forces VBUSVLDEXT2 input
+ * of the pico PHY to 1.
+ */
+
+ val |= USB3_DEVICE_NOT_HOST | USB3_FORCE_VBUSVALID;
break;
case USB_DR_MODE_HOST:
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 9a7d0bd15dc3..07248ff1be5c 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -347,6 +347,28 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
return ret;
}
+static int dwc3_send_clear_stall_ep_cmd(struct dwc3_ep *dep)
+{
+ struct dwc3 *dwc = dep->dwc;
+ struct dwc3_gadget_ep_cmd_params params;
+ u32 cmd = DWC3_DEPCMD_CLEARSTALL;
+
+ /*
+ * As of core revision 2.60a the recommended programming model
+ * is to set the ClearPendIN bit when issuing a Clear Stall EP
+ * command for IN endpoints. This is to prevent an issue where
+ * some (non-compliant) hosts may not send ACK TPs for pending
+ * IN transfers due to a mishandled error condition. Synopsys
+ * STAR 9000614252.
+ */
+ if (dep->direction && (dwc->revision >= DWC3_REVISION_260A))
+ cmd |= DWC3_DEPCMD_CLEARPENDIN;
+
+ memset(&params, 0, sizeof(params));
+
+ return dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
+}
+
static dma_addr_t dwc3_trb_dma_offset(struct dwc3_ep *dep,
struct dwc3_trb *trb)
{
@@ -1314,8 +1336,7 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
else
dep->flags |= DWC3_EP_STALL;
} else {
- ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
- DWC3_DEPCMD_CLEARSTALL, &params);
+ ret = dwc3_send_clear_stall_ep_cmd(dep);
if (ret)
dev_err(dwc->dev, "failed to clear STALL on %s\n",
dep->name);
@@ -2247,7 +2268,6 @@ static void dwc3_clear_stall_all_ep(struct dwc3 *dwc)
for (epnum = 1; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
struct dwc3_ep *dep;
- struct dwc3_gadget_ep_cmd_params params;
int ret;
dep = dwc->eps[epnum];
@@ -2259,9 +2279,7 @@ static void dwc3_clear_stall_all_ep(struct dwc3 *dwc)
dep->flags &= ~DWC3_EP_STALL;
- memset(&params, 0, sizeof(params));
- ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
- DWC3_DEPCMD_CLEARSTALL, &params);
+ ret = dwc3_send_clear_stall_ep_cmd(dep);
WARN_ON_ONCE(ret);
}
}
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index d67de0d22a2b..eb648485a58c 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1868,14 +1868,19 @@ unknown:
}
break;
}
- req->length = value;
- req->context = cdev;
- req->zero = value < w_length;
- value = composite_ep0_queue(cdev, req, GFP_ATOMIC);
- if (value < 0) {
- DBG(cdev, "ep_queue --> %d\n", value);
- req->status = 0;
- composite_setup_complete(gadget->ep0, req);
+
+ if (value >= 0) {
+ req->length = value;
+ req->context = cdev;
+ req->zero = value < w_length;
+ value = composite_ep0_queue(cdev, req,
+ GFP_ATOMIC);
+ if (value < 0) {
+ DBG(cdev, "ep_queue --> %d\n", value);
+ req->status = 0;
+ composite_setup_complete(gadget->ep0,
+ req);
+ }
}
return value;
}
diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index b6f60ca8a035..70cf3477f951 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -1401,6 +1401,7 @@ static const struct usb_gadget_driver configfs_driver_template = {
.owner = THIS_MODULE,
.name = "configfs-gadget",
},
+ .match_existing_only = 1,
};
static struct config_group *gadgets_make(
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index 73515d54e1cc..cc33d2667408 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -2051,7 +2051,7 @@ static int __ffs_data_do_os_desc(enum ffs_os_desc_type type,
if (len < sizeof(*d) ||
d->bFirstInterfaceNumber >= ffs->interfaces_count ||
- d->Reserved1)
+ !d->Reserved1)
return -EINVAL;
for (i = 0; i < ARRAY_SIZE(d->Reserved2); ++i)
if (d->Reserved2[i])
@@ -2729,6 +2729,7 @@ static int _ffs_func_bind(struct usb_configuration *c,
func->ffs->ss_descs_count;
int fs_len, hs_len, ss_len, ret, i;
+ struct ffs_ep *eps_ptr;
/* Make it a single chunk, less management later on */
vla_group(d);
@@ -2777,12 +2778,9 @@ static int _ffs_func_bind(struct usb_configuration *c,
ffs->raw_descs_length);
memset(vla_ptr(vlabuf, d, inums), 0xff, d_inums__sz);
- for (ret = ffs->eps_count; ret; --ret) {
- struct ffs_ep *ptr;
-
- ptr = vla_ptr(vlabuf, d, eps);
- ptr[ret].num = -1;
- }
+ eps_ptr = vla_ptr(vlabuf, d, eps);
+ for (i = 0; i < ffs->eps_count; i++)
+ eps_ptr[i].num = -1;
/* Save pointers
* d_eps == vlabuf, func->eps used to kfree vlabuf later
@@ -2851,7 +2849,7 @@ static int _ffs_func_bind(struct usb_configuration *c,
goto error;
func->function.os_desc_table = vla_ptr(vlabuf, d, os_desc_table);
- if (c->cdev->use_os_string)
+ if (c->cdev->use_os_string) {
for (i = 0; i < ffs->interfaces_count; ++i) {
struct usb_os_desc *desc;
@@ -2862,13 +2860,15 @@ static int _ffs_func_bind(struct usb_configuration *c,
vla_ptr(vlabuf, d, ext_compat) + i * 16;
INIT_LIST_HEAD(&desc->ext_prop);
}
- ret = ffs_do_os_descs(ffs->ms_os_descs_count,
- vla_ptr(vlabuf, d, raw_descs) +
- fs_len + hs_len + ss_len,
- d_raw_descs__sz - fs_len - hs_len - ss_len,
- __ffs_func_bind_do_os_desc, func);
- if (unlikely(ret < 0))
- goto error;
+ ret = ffs_do_os_descs(ffs->ms_os_descs_count,
+ vla_ptr(vlabuf, d, raw_descs) +
+ fs_len + hs_len + ss_len,
+ d_raw_descs__sz - fs_len - hs_len -
+ ss_len,
+ __ffs_func_bind_do_os_desc, func);
+ if (unlikely(ret < 0))
+ goto error;
+ }
func->function.os_desc_n =
c->cdev->use_os_string ? ffs->interfaces_count : 0;
diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
index c45104e3a64b..64706a789580 100644
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -161,14 +161,6 @@ static struct usb_endpoint_descriptor hs_ep_out_desc = {
.wMaxPacketSize = cpu_to_le16(512)
};
-static struct usb_qualifier_descriptor dev_qualifier = {
- .bLength = sizeof(dev_qualifier),
- .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
- .bcdUSB = cpu_to_le16(0x0200),
- .bDeviceClass = USB_CLASS_PRINTER,
- .bNumConfigurations = 1
-};
-
static struct usb_descriptor_header *hs_printer_function[] = {
(struct usb_descriptor_header *) &intf_desc,
(struct usb_descriptor_header *) &hs_ep_in_desc,
diff --git a/drivers/usb/gadget/function/f_tcm.c b/drivers/usb/gadget/function/f_tcm.c
index 35fe3c80cfc0..197f73386fac 100644
--- a/drivers/usb/gadget/function/f_tcm.c
+++ b/drivers/usb/gadget/function/f_tcm.c
@@ -1445,16 +1445,18 @@ static void usbg_drop_tpg(struct se_portal_group *se_tpg)
for (i = 0; i < TPG_INSTANCES; ++i)
if (tpg_instances[i].tpg == tpg)
break;
- if (i < TPG_INSTANCES)
+ if (i < TPG_INSTANCES) {
tpg_instances[i].tpg = NULL;
- opts = container_of(tpg_instances[i].func_inst,
- struct f_tcm_opts, func_inst);
- mutex_lock(&opts->dep_lock);
- if (opts->has_dep)
- module_put(opts->dependent);
- else
- configfs_undepend_item_unlocked(&opts->func_inst.group.cg_item);
- mutex_unlock(&opts->dep_lock);
+ opts = container_of(tpg_instances[i].func_inst,
+ struct f_tcm_opts, func_inst);
+ mutex_lock(&opts->dep_lock);
+ if (opts->has_dep)
+ module_put(opts->dependent);
+ else
+ configfs_undepend_item_unlocked(
+ &opts->func_inst.group.cg_item);
+ mutex_unlock(&opts->dep_lock);
+ }
mutex_unlock(&tpg_instances_lock);
kfree(tpg);
diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c
index 186d4b162524..cd214ec8a601 100644
--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -598,18 +598,6 @@ static struct usb_gadget_strings *fn_strings[] = {
NULL,
};
-static struct usb_qualifier_descriptor devqual_desc = {
- .bLength = sizeof devqual_desc,
- .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
-
- .bcdUSB = cpu_to_le16(0x200),
- .bDeviceClass = USB_CLASS_MISC,
- .bDeviceSubClass = 0x02,
- .bDeviceProtocol = 0x01,
- .bNumConfigurations = 1,
- .bRESERVED = 0,
-};
-
static struct usb_interface_assoc_descriptor iad_desc = {
.bLength = sizeof iad_desc,
.bDescriptorType = USB_DT_INTERFACE_ASSOCIATION,
@@ -1292,6 +1280,7 @@ in_rq_cur(struct usb_function *fn, const struct usb_ctrlrequest *cr)
if (control_selector == UAC2_CS_CONTROL_SAM_FREQ) {
struct cntrl_cur_lay3 c;
+ memset(&c, 0, sizeof(struct cntrl_cur_lay3));
if (entity_id == USB_IN_CLK_ID)
c.dCUR = p_srate;
diff --git a/drivers/usb/gadget/function/storage_common.c b/drivers/usb/gadget/function/storage_common.c
index d62683017cf3..990df221c629 100644
--- a/drivers/usb/gadget/function/storage_common.c
+++ b/drivers/usb/gadget/function/storage_common.c
@@ -83,9 +83,7 @@ EXPORT_SYMBOL_GPL(fsg_fs_function);
* USB 2.0 devices need to expose both high speed and full speed
* descriptors, unless they only run at full speed.
*
- * That means alternate endpoint descriptors (bigger packets)
- * and a "device qualifier" ... plus more construction options
- * for the configuration descriptor.
+ * That means alternate endpoint descriptors (bigger packets).
*/
struct usb_endpoint_descriptor fsg_hs_bulk_in_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
index e64479f882a5..aa3707bdebb4 100644
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -938,8 +938,11 @@ ep0_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr)
struct usb_ep *ep = dev->gadget->ep0;
struct usb_request *req = dev->req;
- if ((retval = setup_req (ep, req, 0)) == 0)
- retval = usb_ep_queue (ep, req, GFP_ATOMIC);
+ if ((retval = setup_req (ep, req, 0)) == 0) {
+ spin_unlock_irq (&dev->lock);
+ retval = usb_ep_queue (ep, req, GFP_KERNEL);
+ spin_lock_irq (&dev->lock);
+ }
dev->state = STATE_DEV_CONNECTED;
/* assume that was SET_CONFIGURATION */
@@ -1457,8 +1460,11 @@ delegate:
w_length);
if (value < 0)
break;
+
+ spin_unlock (&dev->lock);
value = usb_ep_queue (gadget->ep0, dev->req,
- GFP_ATOMIC);
+ GFP_KERNEL);
+ spin_lock (&dev->lock);
if (value < 0) {
clean_req (gadget->ep0, dev->req);
break;
@@ -1481,11 +1487,14 @@ delegate:
if (value >= 0 && dev->state != STATE_DEV_SETUP) {
req->length = value;
req->zero = value < w_length;
- value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
+
+ spin_unlock (&dev->lock);
+ value = usb_ep_queue (gadget->ep0, req, GFP_KERNEL);
if (value < 0) {
DBG (dev, "ep_queue --> %d\n", value);
req->status = 0;
}
+ return value;
}
/* device stalls when value < 0 */
diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
index 6e8300d6a737..e1b2dcebdc2e 100644
--- a/drivers/usb/gadget/udc/udc-core.c
+++ b/drivers/usb/gadget/udc/udc-core.c
@@ -603,11 +603,15 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
}
}
- list_add_tail(&driver->pending, &gadget_driver_pending_list);
- pr_info("udc-core: couldn't find an available UDC - added [%s] to list of pending drivers\n",
- driver->function);
+ if (!driver->match_existing_only) {
+ list_add_tail(&driver->pending, &gadget_driver_pending_list);
+ pr_info("udc-core: couldn't find an available UDC - added [%s] to list of pending drivers\n",
+ driver->function);
+ ret = 0;
+ }
+
mutex_unlock(&udc_lock);
- return 0;
+ return ret;
found:
ret = udc_bind_to_driver(udc, driver);
mutex_unlock(&udc_lock);
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index ae1b6e69eb96..a962b89b65a6 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -368,6 +368,15 @@ static void ehci_shutdown(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ /**
+ * Protect the system from crashing at system shutdown in cases where
+ * usb host is not added yet from OTG controller driver.
+ * As ehci_setup() not done yet, so stop accessing registers or
+ * variables initialized in ehci_setup()
+ */
+ if (!ehci->sbrn)
+ return;
+
spin_lock_irq(&ehci->lock);
ehci->shutdown = true;
ehci->rh_state = EHCI_RH_STOPPING;
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index ffc90295a95f..74f62d68f013 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -872,15 +872,23 @@ int ehci_hub_control(
) {
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
int ports = HCS_N_PORTS (ehci->hcs_params);
- u32 __iomem *status_reg = &ehci->regs->port_status[
- (wIndex & 0xff) - 1];
- u32 __iomem *hostpc_reg = &ehci->regs->hostpc[(wIndex & 0xff) - 1];
+ u32 __iomem *status_reg, *hostpc_reg;
u32 temp, temp1, status;
unsigned long flags;
int retval = 0;
unsigned selector;
/*
+ * Avoid underflow while calculating (wIndex & 0xff) - 1.
+ * The compiler might deduce that wIndex can never be 0 and then
+ * optimize away the tests for !wIndex below.
+ */
+ temp = wIndex & 0xff;
+ temp -= (temp > 0);
+ status_reg = &ehci->regs->port_status[temp];
+ hostpc_reg = &ehci->regs->hostpc[temp];
+
+ /*
* FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR.
* HCS_INDICATOR may say we can change LEDs to off/amber/green.
* (track current state ourselves) ... blink for diagnostics,
diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c
index d3afc89d00f5..2f8d3af811ce 100644
--- a/drivers/usb/host/ehci-msm.c
+++ b/drivers/usb/host/ehci-msm.c
@@ -179,22 +179,32 @@ static int ehci_msm_remove(struct platform_device *pdev)
static int ehci_msm_pm_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
bool do_wakeup = device_may_wakeup(dev);
dev_dbg(dev, "ehci-msm PM suspend\n");
- return ehci_suspend(hcd, do_wakeup);
+ /* Only call ehci_suspend if ehci_setup has been done */
+ if (ehci->sbrn)
+ return ehci_suspend(hcd, do_wakeup);
+
+ return 0;
}
static int ehci_msm_pm_resume(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
dev_dbg(dev, "ehci-msm PM resume\n");
- ehci_resume(hcd, false);
+
+ /* Only call ehci_resume if ehci_setup has been done */
+ if (ehci->sbrn)
+ ehci_resume(hcd, false);
return 0;
}
+
#else
#define ehci_msm_pm_suspend NULL
#define ehci_msm_pm_resume NULL
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 4031b372008e..9a3d7db5be57 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -81,15 +81,23 @@ static int tegra_reset_usb_controller(struct platform_device *pdev)
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct tegra_ehci_hcd *tegra =
(struct tegra_ehci_hcd *)hcd_to_ehci(hcd)->priv;
+ bool has_utmi_pad_registers = false;
phy_np = of_parse_phandle(pdev->dev.of_node, "nvidia,phy", 0);
if (!phy_np)
return -ENOENT;
+ if (of_property_read_bool(phy_np, "nvidia,has-utmi-pad-registers"))
+ has_utmi_pad_registers = true;
+
if (!usb1_reset_attempted) {
struct reset_control *usb1_reset;
- usb1_reset = of_reset_control_get(phy_np, "usb");
+ if (!has_utmi_pad_registers)
+ usb1_reset = of_reset_control_get(phy_np, "utmi-pads");
+ else
+ usb1_reset = tegra->rst;
+
if (IS_ERR(usb1_reset)) {
dev_warn(&pdev->dev,
"can't get utmi-pads reset from the PHY\n");
@@ -99,13 +107,15 @@ static int tegra_reset_usb_controller(struct platform_device *pdev)
reset_control_assert(usb1_reset);
udelay(1);
reset_control_deassert(usb1_reset);
+
+ if (!has_utmi_pad_registers)
+ reset_control_put(usb1_reset);
}
- reset_control_put(usb1_reset);
usb1_reset_attempted = true;
}
- if (!of_property_read_bool(phy_np, "nvidia,has-utmi-pad-registers")) {
+ if (!has_utmi_pad_registers) {
reset_control_assert(tegra->rst);
udelay(1);
reset_control_deassert(tegra->rst);
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index d029bbe9eb36..641fed609911 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -183,7 +183,6 @@ static int ed_schedule (struct ohci_hcd *ohci, struct ed *ed)
{
int branch;
- ed->state = ED_OPER;
ed->ed_prev = NULL;
ed->ed_next = NULL;
ed->hwNextED = 0;
@@ -259,6 +258,8 @@ static int ed_schedule (struct ohci_hcd *ohci, struct ed *ed)
/* the HC may not see the schedule updates yet, but if it does
* then they'll be properly ordered.
*/
+
+ ed->state = ED_OPER;
return 0;
}
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 48672fac7ff3..c10972fcc8e4 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -37,6 +37,7 @@
/* Device for a quirk */
#define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73
#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000
+#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1009 0x1009
#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400
#define PCI_VENDOR_ID_ETRON 0x1b6f
@@ -114,6 +115,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
}
+ if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
+ pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1009)
+ xhci->quirks |= XHCI_BROKEN_STREAMS;
+
if (pdev->vendor == PCI_VENDOR_ID_NEC)
xhci->quirks |= XHCI_NEC_HOST;
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 676ea458148b..1f3f981fe7f8 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -196,6 +196,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
ret = clk_prepare_enable(clk);
if (ret)
goto put_hcd;
+ } else if (PTR_ERR(clk) == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto put_hcd;
}
xhci = hcd_to_xhci(hcd);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 52deae4b7eac..d7d502578d79 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -290,6 +290,14 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
xhci->cmd_ring_state = CMD_RING_STATE_ABORTED;
+
+ /*
+ * Writing the CMD_RING_ABORT bit should cause a cmd completion event,
+ * however on some host hw the CMD_RING_RUNNING bit is correctly cleared
+ * but the completion event in never sent. Use the cmd timeout timer to
+ * handle those cases. Use twice the time to cover the bit polling retry
+ */
+ mod_timer(&xhci->cmd_timer, jiffies + (2 * XHCI_CMD_DEFAULT_TIMEOUT));
xhci_write_64(xhci, temp_64 | CMD_RING_ABORT,
&xhci->op_regs->cmd_ring);
@@ -314,6 +322,7 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
xhci_err(xhci, "Stopped the command ring failed, "
"maybe the host is dead\n");
+ del_timer(&xhci->cmd_timer);
xhci->xhc_state |= XHCI_STATE_DYING;
xhci_quiesce(xhci);
xhci_halt(xhci);
@@ -1246,22 +1255,21 @@ void xhci_handle_command_timeout(unsigned long data)
int ret;
unsigned long flags;
u64 hw_ring_state;
- struct xhci_command *cur_cmd = NULL;
+ bool second_timeout = false;
xhci = (struct xhci_hcd *) data;
/* mark this command to be cancelled */
spin_lock_irqsave(&xhci->lock, flags);
if (xhci->current_cmd) {
- cur_cmd = xhci->current_cmd;
- cur_cmd->status = COMP_CMD_ABORT;
+ if (xhci->current_cmd->status == COMP_CMD_ABORT)
+ second_timeout = true;
+ xhci->current_cmd->status = COMP_CMD_ABORT;
}
-
/* Make sure command ring is running before aborting it */
hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) &&
(hw_ring_state & CMD_RING_RUNNING)) {
-
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_dbg(xhci, "Command timeout\n");
ret = xhci_abort_cmd_ring(xhci);
@@ -1273,6 +1281,15 @@ void xhci_handle_command_timeout(unsigned long data)
}
return;
}
+
+ /* command ring failed to restart, or host removed. Bail out */
+ if (second_timeout || xhci->xhc_state & XHCI_STATE_REMOVING) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_dbg(xhci, "command timed out twice, ring start fail?\n");
+ xhci_cleanup_command_queue(xhci);
+ return;
+ }
+
/* command timeout on stopped ring, ring can't be aborted */
xhci_dbg(xhci, "Command timeout on stopped ring\n");
xhci_handle_stopped_cmd_ring(xhci, xhci->current_cmd);
@@ -2721,7 +2738,8 @@ hw_died:
writel(irq_pending, &xhci->ir_set->irq_pending);
}
- if (xhci->xhc_state & XHCI_STATE_DYING) {
+ if (xhci->xhc_state & XHCI_STATE_DYING ||
+ xhci->xhc_state & XHCI_STATE_HALTED) {
xhci_dbg(xhci, "xHCI dying, ignoring interrupt. "
"Shouldn't IRQs be disabled?\n");
/* Clear the event handler busy flag (RW1C);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index fa7e1ef36cd9..f2f9518c53ab 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -685,20 +685,23 @@ void xhci_stop(struct usb_hcd *hcd)
u32 temp;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
- if (xhci->xhc_state & XHCI_STATE_HALTED)
- return;
-
mutex_lock(&xhci->mutex);
- spin_lock_irq(&xhci->lock);
- xhci->xhc_state |= XHCI_STATE_HALTED;
- xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
- /* Make sure the xHC is halted for a USB3 roothub
- * (xhci_stop() could be called as part of failed init).
- */
- xhci_halt(xhci);
- xhci_reset(xhci);
- spin_unlock_irq(&xhci->lock);
+ if (!(xhci->xhc_state & XHCI_STATE_HALTED)) {
+ spin_lock_irq(&xhci->lock);
+
+ xhci->xhc_state |= XHCI_STATE_HALTED;
+ xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
+ xhci_halt(xhci);
+ xhci_reset(xhci);
+
+ spin_unlock_irq(&xhci->lock);
+ }
+
+ if (!usb_hcd_is_primary_hcd(hcd)) {
+ mutex_unlock(&xhci->mutex);
+ return;
+ }
xhci_cleanup_msix(xhci);
@@ -4886,7 +4889,7 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
xhci->hcc_params2 = readl(&xhci->cap_regs->hcc_params2);
xhci_print_registers(xhci);
- xhci->quirks = quirks;
+ xhci->quirks |= quirks;
get_quirks(dev, xhci);
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 39fd95833eb8..f824336def5c 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1090,29 +1090,6 @@ void musb_stop(struct musb *musb)
musb_platform_try_idle(musb, 0);
}
-static void musb_shutdown(struct platform_device *pdev)
-{
- struct musb *musb = dev_to_musb(&pdev->dev);
- unsigned long flags;
-
- pm_runtime_get_sync(musb->controller);
-
- musb_host_cleanup(musb);
- musb_gadget_cleanup(musb);
-
- spin_lock_irqsave(&musb->lock, flags);
- musb_platform_disable(musb);
- musb_generic_disable(musb);
- spin_unlock_irqrestore(&musb->lock, flags);
-
- musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
- musb_platform_exit(musb);
-
- pm_runtime_put(musb->controller);
- /* FIXME power down */
-}
-
-
/*-------------------------------------------------------------------------*/
/*
@@ -1702,7 +1679,7 @@ EXPORT_SYMBOL_GPL(musb_dma_completion);
#define use_dma 0
#endif
-static void (*musb_phy_callback)(enum musb_vbus_id_status status);
+static int (*musb_phy_callback)(enum musb_vbus_id_status status);
/*
* musb_mailbox - optional phy notifier function
@@ -1711,11 +1688,12 @@ static void (*musb_phy_callback)(enum musb_vbus_id_status status);
* Optionally gets called from the USB PHY. Note that the USB PHY must be
* disabled at the point the phy_callback is registered or unregistered.
*/
-void musb_mailbox(enum musb_vbus_id_status status)
+int musb_mailbox(enum musb_vbus_id_status status)
{
if (musb_phy_callback)
- musb_phy_callback(status);
+ return musb_phy_callback(status);
+ return -ENODEV;
};
EXPORT_SYMBOL_GPL(musb_mailbox);
@@ -2028,11 +2006,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
musb_readl = musb_default_readl;
musb_writel = musb_default_writel;
- /* We need musb_read/write functions initialized for PM */
- pm_runtime_use_autosuspend(musb->controller);
- pm_runtime_set_autosuspend_delay(musb->controller, 200);
- pm_runtime_enable(musb->controller);
-
/* The musb_platform_init() call:
* - adjusts musb->mregs
* - sets the musb->isr
@@ -2134,6 +2107,16 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
if (musb->ops->phy_callback)
musb_phy_callback = musb->ops->phy_callback;
+ /*
+ * We need musb_read/write functions initialized for PM.
+ * Note that at least 2430 glue needs autosuspend delay
+ * somewhere above 300 ms for the hardware to idle properly
+ * after disconnecting the cable in host mode. Let's use
+ * 500 ms for some margin.
+ */
+ pm_runtime_use_autosuspend(musb->controller);
+ pm_runtime_set_autosuspend_delay(musb->controller, 500);
+ pm_runtime_enable(musb->controller);
pm_runtime_get_sync(musb->controller);
status = usb_phy_init(musb->xceiv);
@@ -2237,13 +2220,8 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
if (status)
goto fail5;
- pm_runtime_put(musb->controller);
-
- /*
- * For why this is currently needed, see commit 3e43a0725637
- * ("usb: musb: core: add pm_runtime_irq_safe()")
- */
- pm_runtime_irq_safe(musb->controller);
+ pm_runtime_mark_last_busy(musb->controller);
+ pm_runtime_put_autosuspend(musb->controller);
return 0;
@@ -2265,7 +2243,9 @@ fail2_5:
usb_phy_shutdown(musb->xceiv);
err_usb_phy_init:
+ pm_runtime_dont_use_autosuspend(musb->controller);
pm_runtime_put_sync(musb->controller);
+ pm_runtime_disable(musb->controller);
fail2:
if (musb->irq_wake)
@@ -2273,7 +2253,6 @@ fail2:
musb_platform_exit(musb);
fail1:
- pm_runtime_disable(musb->controller);
dev_err(musb->controller,
"musb_init_controller failed with status %d\n", status);
@@ -2312,6 +2291,7 @@ static int musb_remove(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct musb *musb = dev_to_musb(dev);
+ unsigned long flags;
/* this gets called on rmmod.
* - Host mode: host may still be active
@@ -2319,17 +2299,26 @@ static int musb_remove(struct platform_device *pdev)
* - OTG mode: both roles are deactivated (or never-activated)
*/
musb_exit_debugfs(musb);
- musb_shutdown(pdev);
- musb_phy_callback = NULL;
-
- if (musb->dma_controller)
- musb_dma_controller_destroy(musb->dma_controller);
-
- usb_phy_shutdown(musb->xceiv);
cancel_work_sync(&musb->irq_work);
cancel_delayed_work_sync(&musb->finish_resume_work);
cancel_delayed_work_sync(&musb->deassert_reset_work);
+ pm_runtime_get_sync(musb->controller);
+ musb_host_cleanup(musb);
+ musb_gadget_cleanup(musb);
+ spin_lock_irqsave(&musb->lock, flags);
+ musb_platform_disable(musb);
+ musb_generic_disable(musb);
+ spin_unlock_irqrestore(&musb->lock, flags);
+ musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+ pm_runtime_dont_use_autosuspend(musb->controller);
+ pm_runtime_put_sync(musb->controller);
+ pm_runtime_disable(musb->controller);
+ musb_platform_exit(musb);
+ musb_phy_callback = NULL;
+ if (musb->dma_controller)
+ musb_dma_controller_destroy(musb->dma_controller);
+ usb_phy_shutdown(musb->xceiv);
musb_free(musb);
device_init_wakeup(dev, 0);
return 0;
@@ -2429,7 +2418,8 @@ static void musb_restore_context(struct musb *musb)
musb_writew(musb_base, MUSB_INTRTXE, musb->intrtxe);
musb_writew(musb_base, MUSB_INTRRXE, musb->intrrxe);
musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe);
- musb_writeb(musb_base, MUSB_DEVCTL, musb->context.devctl);
+ if (musb->context.devctl & MUSB_DEVCTL_SESSION)
+ musb_writeb(musb_base, MUSB_DEVCTL, musb->context.devctl);
for (i = 0; i < musb->config->num_eps; ++i) {
struct musb_hw_ep *hw_ep;
@@ -2612,7 +2602,6 @@ static struct platform_driver musb_driver = {
},
.probe = musb_probe,
.remove = musb_remove,
- .shutdown = musb_shutdown,
};
module_platform_driver(musb_driver);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index b6afe9e43305..b55a776b03eb 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -215,7 +215,7 @@ struct musb_platform_ops {
dma_addr_t *dma_addr, u32 *len);
void (*pre_root_reset_end)(struct musb *musb);
void (*post_root_reset_end)(struct musb *musb);
- void (*phy_callback)(enum musb_vbus_id_status status);
+ int (*phy_callback)(enum musb_vbus_id_status status);
};
/*
@@ -312,6 +312,7 @@ struct musb {
struct work_struct irq_work;
struct delayed_work deassert_reset_work;
struct delayed_work finish_resume_work;
+ struct delayed_work gadget_work;
u16 hwvers;
u16 intrrxe;
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 152865b36522..af2a3a7addf9 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1656,6 +1656,20 @@ static int musb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
return usb_phy_set_power(musb->xceiv, mA);
}
+static void musb_gadget_work(struct work_struct *work)
+{
+ struct musb *musb;
+ unsigned long flags;
+
+ musb = container_of(work, struct musb, gadget_work.work);
+ pm_runtime_get_sync(musb->controller);
+ spin_lock_irqsave(&musb->lock, flags);
+ musb_pullup(musb, musb->softconnect);
+ spin_unlock_irqrestore(&musb->lock, flags);
+ pm_runtime_mark_last_busy(musb->controller);
+ pm_runtime_put_autosuspend(musb->controller);
+}
+
static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
{
struct musb *musb = gadget_to_musb(gadget);
@@ -1663,20 +1677,16 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
is_on = !!is_on;
- pm_runtime_get_sync(musb->controller);
-
/* NOTE: this assumes we are sensing vbus; we'd rather
* not pullup unless the B-session is active.
*/
spin_lock_irqsave(&musb->lock, flags);
if (is_on != musb->softconnect) {
musb->softconnect = is_on;
- musb_pullup(musb, is_on);
+ schedule_delayed_work(&musb->gadget_work, 0);
}
spin_unlock_irqrestore(&musb->lock, flags);
- pm_runtime_put(musb->controller);
-
return 0;
}
@@ -1845,7 +1855,7 @@ int musb_gadget_setup(struct musb *musb)
#elif IS_ENABLED(CONFIG_USB_MUSB_GADGET)
musb->g.is_otg = 0;
#endif
-
+ INIT_DELAYED_WORK(&musb->gadget_work, musb_gadget_work);
musb_g_init_endpoints(musb);
musb->is_active = 0;
@@ -1866,6 +1876,8 @@ void musb_gadget_cleanup(struct musb *musb)
{
if (musb->port_mode == MUSB_PORT_MODE_HOST)
return;
+
+ cancel_delayed_work_sync(&musb->gadget_work);
usb_del_gadget_udc(&musb->g);
}
@@ -1914,8 +1926,8 @@ static int musb_gadget_start(struct usb_gadget *g,
if (musb->xceiv->last_event == USB_EVENT_ID)
musb_platform_set_vbus(musb, 1);
- if (musb->xceiv->last_event == USB_EVENT_NONE)
- pm_runtime_put(musb->controller);
+ pm_runtime_mark_last_busy(musb->controller);
+ pm_runtime_put_autosuspend(musb->controller);
return 0;
@@ -1934,8 +1946,7 @@ static int musb_gadget_stop(struct usb_gadget *g)
struct musb *musb = gadget_to_musb(g);
unsigned long flags;
- if (musb->xceiv->last_event == USB_EVENT_NONE)
- pm_runtime_get_sync(musb->controller);
+ pm_runtime_get_sync(musb->controller);
/*
* REVISIT always use otg_set_peripheral() here too;
@@ -1963,7 +1974,8 @@ static int musb_gadget_stop(struct usb_gadget *g)
* that currently misbehaves.
*/
- pm_runtime_put(musb->controller);
+ pm_runtime_mark_last_busy(musb->controller);
+ pm_runtime_put_autosuspend(musb->controller);
return 0;
}
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 2f8ad7f1f482..d227a71d85e1 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -434,7 +434,13 @@ static void musb_advance_schedule(struct musb *musb, struct urb *urb,
}
}
- if (qh != NULL && qh->is_ready) {
+ /*
+ * The pipe must be broken if current urb->status is set, so don't
+ * start next urb.
+ * TODO: to minimize the risk of regression, only check urb->status
+ * for RX, until we have a test case to understand the behavior of TX.
+ */
+ if ((!status || !is_in) && qh && qh->is_ready) {
dev_dbg(musb->controller, "... next ep%d %cX urb %p\n",
hw_ep->epnum, is_in ? 'R' : 'T', next_urb(qh));
musb_start_urb(musb, is_in, qh);
@@ -594,14 +600,13 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, u8 epnum)
musb_writew(ep->regs, MUSB_TXCSR, 0);
/* scrub all previous state, clearing toggle */
- } else {
- csr = musb_readw(ep->regs, MUSB_RXCSR);
- if (csr & MUSB_RXCSR_RXPKTRDY)
- WARNING("rx%d, packet/%d ready?\n", ep->epnum,
- musb_readw(ep->regs, MUSB_RXCOUNT));
-
- musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
}
+ csr = musb_readw(ep->regs, MUSB_RXCSR);
+ if (csr & MUSB_RXCSR_RXPKTRDY)
+ WARNING("rx%d, packet/%d ready?\n", ep->epnum,
+ musb_readw(ep->regs, MUSB_RXCOUNT));
+
+ musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
/* target addr and (for multipoint) hub addr/port */
if (musb->is_multipoint) {
@@ -627,7 +632,7 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, u8 epnum)
ep->rx_reinit = 0;
}
-static int musb_tx_dma_set_mode_mentor(struct dma_controller *dma,
+static void musb_tx_dma_set_mode_mentor(struct dma_controller *dma,
struct musb_hw_ep *hw_ep, struct musb_qh *qh,
struct urb *urb, u32 offset,
u32 *length, u8 *mode)
@@ -664,23 +669,18 @@ static int musb_tx_dma_set_mode_mentor(struct dma_controller *dma,
}
channel->desired_mode = *mode;
musb_writew(epio, MUSB_TXCSR, csr);
-
- return 0;
}
-static int musb_tx_dma_set_mode_cppi_tusb(struct dma_controller *dma,
- struct musb_hw_ep *hw_ep,
- struct musb_qh *qh,
- struct urb *urb,
- u32 offset,
- u32 *length,
- u8 *mode)
+static void musb_tx_dma_set_mode_cppi_tusb(struct dma_controller *dma,
+ struct musb_hw_ep *hw_ep,
+ struct musb_qh *qh,
+ struct urb *urb,
+ u32 offset,
+ u32 *length,
+ u8 *mode)
{
struct dma_channel *channel = hw_ep->tx_channel;
- if (!is_cppi_enabled(hw_ep->musb) && !tusb_dma_omap(hw_ep->musb))
- return -ENODEV;
-
channel->actual_len = 0;
/*
@@ -688,8 +688,6 @@ static int musb_tx_dma_set_mode_cppi_tusb(struct dma_controller *dma,
* to identify the zero-length-final-packet case.
*/
*mode = (urb->transfer_flags & URB_ZERO_PACKET) ? 1 : 0;
-
- return 0;
}
static bool musb_tx_dma_program(struct dma_controller *dma,
@@ -699,15 +697,14 @@ static bool musb_tx_dma_program(struct dma_controller *dma,
struct dma_channel *channel = hw_ep->tx_channel;
u16 pkt_size = qh->maxpacket;
u8 mode;
- int res;
if (musb_dma_inventra(hw_ep->musb) || musb_dma_ux500(hw_ep->musb))
- res = musb_tx_dma_set_mode_mentor(dma, hw_ep, qh, urb,
- offset, &length, &mode);
+ musb_tx_dma_set_mode_mentor(dma, hw_ep, qh, urb, offset,
+ &length, &mode);
+ else if (is_cppi_enabled(hw_ep->musb) || tusb_dma_omap(hw_ep->musb))
+ musb_tx_dma_set_mode_cppi_tusb(dma, hw_ep, qh, urb, offset,
+ &length, &mode);
else
- res = musb_tx_dma_set_mode_cppi_tusb(dma, hw_ep, qh, urb,
- offset, &length, &mode);
- if (res)
return false;
qh->segsize = length;
@@ -995,9 +992,15 @@ static void musb_bulk_nak_timeout(struct musb *musb, struct musb_hw_ep *ep,
if (is_in) {
dma = is_dma_capable() ? ep->rx_channel : NULL;
- /* clear nak timeout bit */
+ /*
+ * Need to stop the transaction by clearing REQPKT first
+ * then the NAK Timeout bit ref MUSBMHDRC USB 2.0 HIGH-SPEED
+ * DUAL-ROLE CONTROLLER Programmer's Guide, section 9.2.2
+ */
rx_csr = musb_readw(epio, MUSB_RXCSR);
rx_csr |= MUSB_RXCSR_H_WZC_BITS;
+ rx_csr &= ~MUSB_RXCSR_H_REQPKT;
+ musb_writew(epio, MUSB_RXCSR, rx_csr);
rx_csr &= ~MUSB_RXCSR_DATAERROR;
musb_writew(epio, MUSB_RXCSR, rx_csr);
@@ -1551,7 +1554,7 @@ static int musb_rx_dma_iso_cppi41(struct dma_controller *dma,
struct urb *urb,
size_t len)
{
- struct dma_channel *channel = hw_ep->tx_channel;
+ struct dma_channel *channel = hw_ep->rx_channel;
void __iomem *epio = hw_ep->regs;
dma_addr_t *buf;
u32 length, res;
@@ -1870,6 +1873,9 @@ void musb_host_rx(struct musb *musb, u8 epnum)
status = -EPROTO;
musb_writeb(epio, MUSB_RXINTERVAL, 0);
+ rx_csr &= ~MUSB_RXCSR_H_ERROR;
+ musb_writew(epio, MUSB_RXCSR, rx_csr);
+
} else if (rx_csr & MUSB_RXCSR_DATAERROR) {
if (USB_ENDPOINT_XFER_ISOC != qh->type) {
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index c84e0322c108..0b4cec940386 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -49,97 +49,14 @@ struct omap2430_glue {
enum musb_vbus_id_status status;
struct work_struct omap_musb_mailbox_work;
struct device *control_otghs;
+ bool cable_connected;
+ bool enabled;
+ bool powered;
};
#define glue_to_musb(g) platform_get_drvdata(g->musb)
static struct omap2430_glue *_glue;
-static struct timer_list musb_idle_timer;
-
-static void musb_do_idle(unsigned long _musb)
-{
- struct musb *musb = (void *)_musb;
- unsigned long flags;
- u8 power;
- u8 devctl;
-
- spin_lock_irqsave(&musb->lock, flags);
-
- switch (musb->xceiv->otg->state) {
- case OTG_STATE_A_WAIT_BCON:
-
- devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
- if (devctl & MUSB_DEVCTL_BDEVICE) {
- musb->xceiv->otg->state = OTG_STATE_B_IDLE;
- MUSB_DEV_MODE(musb);
- } else {
- musb->xceiv->otg->state = OTG_STATE_A_IDLE;
- MUSB_HST_MODE(musb);
- }
- break;
- case OTG_STATE_A_SUSPEND:
- /* finish RESUME signaling? */
- if (musb->port1_status & MUSB_PORT_STAT_RESUME) {
- power = musb_readb(musb->mregs, MUSB_POWER);
- power &= ~MUSB_POWER_RESUME;
- dev_dbg(musb->controller, "root port resume stopped, power %02x\n", power);
- musb_writeb(musb->mregs, MUSB_POWER, power);
- musb->is_active = 1;
- musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
- | MUSB_PORT_STAT_RESUME);
- musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
- usb_hcd_poll_rh_status(musb->hcd);
- /* NOTE: it might really be A_WAIT_BCON ... */
- musb->xceiv->otg->state = OTG_STATE_A_HOST;
- }
- break;
- case OTG_STATE_A_HOST:
- devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
- if (devctl & MUSB_DEVCTL_BDEVICE)
- musb->xceiv->otg->state = OTG_STATE_B_IDLE;
- else
- musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
- default:
- break;
- }
- spin_unlock_irqrestore(&musb->lock, flags);
-}
-
-
-static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout)
-{
- unsigned long default_timeout = jiffies + msecs_to_jiffies(3);
- static unsigned long last_timer;
-
- if (timeout == 0)
- timeout = default_timeout;
-
- /* Never idle if active, or when VBUS timeout is not set as host */
- if (musb->is_active || ((musb->a_wait_bcon == 0)
- && (musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON))) {
- dev_dbg(musb->controller, "%s active, deleting timer\n",
- usb_otg_state_string(musb->xceiv->otg->state));
- del_timer(&musb_idle_timer);
- last_timer = jiffies;
- return;
- }
-
- if (time_after(last_timer, timeout)) {
- if (!timer_pending(&musb_idle_timer))
- last_timer = timeout;
- else {
- dev_dbg(musb->controller, "Longer idle timer already pending, ignoring\n");
- return;
- }
- }
- last_timer = timeout;
-
- dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n",
- usb_otg_state_string(musb->xceiv->otg->state),
- (unsigned long)jiffies_to_msecs(timeout - jiffies));
- mod_timer(&musb_idle_timer, timeout);
-}
-
static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
{
struct usb_otg *otg = musb->xceiv->otg;
@@ -205,16 +122,6 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
musb_readb(musb->mregs, MUSB_DEVCTL));
}
-static int omap2430_musb_set_mode(struct musb *musb, u8 musb_mode)
-{
- u8 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
-
- devctl |= MUSB_DEVCTL_SESSION;
- musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
-
- return 0;
-}
-
static inline void omap2430_low_level_exit(struct musb *musb)
{
u32 l;
@@ -234,22 +141,63 @@ static inline void omap2430_low_level_init(struct musb *musb)
musb_writel(musb->mregs, OTG_FORCESTDBY, l);
}
-static void omap2430_musb_mailbox(enum musb_vbus_id_status status)
+/*
+ * We can get multiple cable events so we need to keep track
+ * of the power state. Only keep power enabled if USB cable is
+ * connected and a gadget is started.
+ */
+static void omap2430_set_power(struct musb *musb, bool enabled, bool cable)
+{
+ struct device *dev = musb->controller;
+ struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
+ bool power_up;
+ int res;
+
+ if (glue->enabled != enabled)
+ glue->enabled = enabled;
+
+ if (glue->cable_connected != cable)
+ glue->cable_connected = cable;
+
+ power_up = glue->enabled && glue->cable_connected;
+ if (power_up == glue->powered) {
+ dev_warn(musb->controller, "power state already %i\n",
+ power_up);
+ return;
+ }
+
+ glue->powered = power_up;
+
+ if (power_up) {
+ res = pm_runtime_get_sync(musb->controller);
+ if (res < 0) {
+ dev_err(musb->controller, "could not enable: %i", res);
+ glue->powered = false;
+ }
+ } else {
+ pm_runtime_mark_last_busy(musb->controller);
+ pm_runtime_put_autosuspend(musb->controller);
+ }
+}
+
+static int omap2430_musb_mailbox(enum musb_vbus_id_status status)
{
struct omap2430_glue *glue = _glue;
if (!glue) {
pr_err("%s: musb core is not yet initialized\n", __func__);
- return;
+ return -EPROBE_DEFER;
}
glue->status = status;
if (!glue_to_musb(glue)) {
pr_err("%s: musb core is not yet ready\n", __func__);
- return;
+ return -EPROBE_DEFER;
}
schedule_work(&glue->omap_musb_mailbox_work);
+
+ return 0;
}
static void omap_musb_set_mailbox(struct omap2430_glue *glue)
@@ -259,6 +207,13 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
struct musb_hdrc_platform_data *pdata = dev_get_platdata(dev);
struct omap_musb_board_data *data = pdata->board_data;
struct usb_otg *otg = musb->xceiv->otg;
+ bool cable_connected;
+
+ cable_connected = ((glue->status == MUSB_ID_GROUND) ||
+ (glue->status == MUSB_VBUS_VALID));
+
+ if (cable_connected)
+ omap2430_set_power(musb, glue->enabled, cable_connected);
switch (glue->status) {
case MUSB_ID_GROUND:
@@ -268,7 +223,6 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
musb->xceiv->otg->state = OTG_STATE_A_IDLE;
musb->xceiv->last_event = USB_EVENT_ID;
if (musb->gadget_driver) {
- pm_runtime_get_sync(dev);
omap_control_usb_set_mode(glue->control_otghs,
USB_MODE_HOST);
omap2430_musb_set_vbus(musb, 1);
@@ -281,8 +235,6 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
otg->default_a = false;
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
musb->xceiv->last_event = USB_EVENT_VBUS;
- if (musb->gadget_driver)
- pm_runtime_get_sync(dev);
omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
break;
@@ -291,11 +243,8 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
dev_dbg(dev, "VBUS Disconnect\n");
musb->xceiv->last_event = USB_EVENT_NONE;
- if (musb->gadget_driver) {
+ if (musb->gadget_driver)
omap2430_musb_set_vbus(musb, 0);
- pm_runtime_mark_last_busy(dev);
- pm_runtime_put_autosuspend(dev);
- }
if (data->interface_type == MUSB_INTERFACE_UTMI)
otg_set_vbus(musb->xceiv->otg, 0);
@@ -307,6 +256,9 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
dev_dbg(dev, "ID float\n");
}
+ if (!cable_connected)
+ omap2430_set_power(musb, glue->enabled, cable_connected);
+
atomic_notifier_call_chain(&musb->xceiv->notifier,
musb->xceiv->last_event, NULL);
}
@@ -316,13 +268,8 @@ static void omap_musb_mailbox_work(struct work_struct *mailbox_work)
{
struct omap2430_glue *glue = container_of(mailbox_work,
struct omap2430_glue, omap_musb_mailbox_work);
- struct musb *musb = glue_to_musb(glue);
- struct device *dev = musb->controller;
- pm_runtime_get_sync(dev);
omap_musb_set_mailbox(glue);
- pm_runtime_mark_last_busy(dev);
- pm_runtime_put_autosuspend(dev);
}
static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci)
@@ -389,23 +336,7 @@ static int omap2430_musb_init(struct musb *musb)
return PTR_ERR(musb->phy);
}
musb->isr = omap2430_musb_interrupt;
-
- /*
- * Enable runtime PM for musb parent (this driver). We can't
- * do it earlier as struct musb is not yet allocated and we
- * need to touch the musb registers for runtime PM.
- */
- pm_runtime_enable(glue->dev);
- status = pm_runtime_get_sync(glue->dev);
- if (status < 0)
- goto err1;
-
- status = pm_runtime_get_sync(dev);
- if (status < 0) {
- dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status);
- pm_runtime_put_sync(glue->dev);
- goto err1;
- }
+ phy_init(musb->phy);
l = musb_readl(musb->mregs, OTG_INTERFSEL);
@@ -427,20 +358,10 @@ static int omap2430_musb_init(struct musb *musb)
musb_readl(musb->mregs, OTG_INTERFSEL),
musb_readl(musb->mregs, OTG_SIMENABLE));
- setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
-
if (glue->status != MUSB_UNKNOWN)
omap_musb_set_mailbox(glue);
- phy_init(musb->phy);
- phy_power_on(musb->phy);
-
- pm_runtime_put_noidle(musb->controller);
- pm_runtime_put_noidle(glue->dev);
return 0;
-
-err1:
- return status;
}
static void omap2430_musb_enable(struct musb *musb)
@@ -452,6 +373,11 @@ static void omap2430_musb_enable(struct musb *musb)
struct musb_hdrc_platform_data *pdata = dev_get_platdata(dev);
struct omap_musb_board_data *data = pdata->board_data;
+ if (!WARN_ON(!musb->phy))
+ phy_power_on(musb->phy);
+
+ omap2430_set_power(musb, true, glue->cable_connected);
+
switch (glue->status) {
case MUSB_ID_GROUND:
@@ -487,18 +413,25 @@ static void omap2430_musb_disable(struct musb *musb)
struct device *dev = musb->controller;
struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
+ if (!WARN_ON(!musb->phy))
+ phy_power_off(musb->phy);
+
if (glue->status != MUSB_UNKNOWN)
omap_control_usb_set_mode(glue->control_otghs,
USB_MODE_DISCONNECT);
+
+ omap2430_set_power(musb, false, glue->cable_connected);
}
static int omap2430_musb_exit(struct musb *musb)
{
- del_timer_sync(&musb_idle_timer);
+ struct device *dev = musb->controller;
+ struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
omap2430_low_level_exit(musb);
- phy_power_off(musb->phy);
phy_exit(musb->phy);
+ musb->phy = NULL;
+ cancel_work_sync(&glue->omap_musb_mailbox_work);
return 0;
}
@@ -512,9 +445,6 @@ static const struct musb_platform_ops omap2430_ops = {
.init = omap2430_musb_init,
.exit = omap2430_musb_exit,
- .set_mode = omap2430_musb_set_mode,
- .try_idle = omap2430_musb_try_idle,
-
.set_vbus = omap2430_musb_set_vbus,
.enable = omap2430_musb_enable,
@@ -639,11 +569,9 @@ static int omap2430_probe(struct platform_device *pdev)
goto err2;
}
- /*
- * Note that we cannot enable PM runtime yet for this
- * driver as we need struct musb initialized first.
- * See omap2430_musb_init above.
- */
+ pm_runtime_enable(glue->dev);
+ pm_runtime_use_autosuspend(glue->dev);
+ pm_runtime_set_autosuspend_delay(glue->dev, 500);
ret = platform_device_add(musb);
if (ret) {
@@ -662,12 +590,14 @@ err0:
static int omap2430_remove(struct platform_device *pdev)
{
- struct omap2430_glue *glue = platform_get_drvdata(pdev);
+ struct omap2430_glue *glue = platform_get_drvdata(pdev);
+ struct musb *musb = glue_to_musb(glue);
pm_runtime_get_sync(glue->dev);
- cancel_work_sync(&glue->omap_musb_mailbox_work);
platform_device_unregister(glue->musb);
+ omap2430_set_power(musb, false, false);
pm_runtime_put_sync(glue->dev);
+ pm_runtime_dont_use_autosuspend(glue->dev);
pm_runtime_disable(glue->dev);
return 0;
@@ -680,12 +610,13 @@ static int omap2430_runtime_suspend(struct device *dev)
struct omap2430_glue *glue = dev_get_drvdata(dev);
struct musb *musb = glue_to_musb(glue);
- if (musb) {
- musb->context.otg_interfsel = musb_readl(musb->mregs,
- OTG_INTERFSEL);
+ if (!musb)
+ return 0;
- omap2430_low_level_exit(musb);
- }
+ musb->context.otg_interfsel = musb_readl(musb->mregs,
+ OTG_INTERFSEL);
+
+ omap2430_low_level_exit(musb);
return 0;
}
@@ -696,7 +627,7 @@ static int omap2430_runtime_resume(struct device *dev)
struct musb *musb = glue_to_musb(glue);
if (!musb)
- return -EPROBE_DEFER;
+ return 0;
omap2430_low_level_init(musb);
musb_writel(musb->mregs, OTG_INTERFSEL,
@@ -738,18 +669,8 @@ static struct platform_driver omap2430_driver = {
},
};
+module_platform_driver(omap2430_driver);
+
MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer");
MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
MODULE_LICENSE("GPL v2");
-
-static int __init omap2430_init(void)
-{
- return platform_driver_register(&omap2430_driver);
-}
-subsys_initcall(omap2430_init);
-
-static void __exit omap2430_exit(void)
-{
- platform_driver_unregister(&omap2430_driver);
-}
-module_exit(omap2430_exit);
diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
index fdab4232cfbf..76500515dd8b 100644
--- a/drivers/usb/musb/sunxi.c
+++ b/drivers/usb/musb/sunxi.c
@@ -80,7 +80,8 @@ static struct musb *sunxi_musb;
struct sunxi_glue {
struct device *dev;
- struct platform_device *musb;
+ struct musb *musb;
+ struct platform_device *musb_pdev;
struct clk *clk;
struct reset_control *rst;
struct phy *phy;
@@ -102,7 +103,7 @@ static void sunxi_musb_work(struct work_struct *work)
return;
if (test_and_clear_bit(SUNXI_MUSB_FL_HOSTMODE_PEND, &glue->flags)) {
- struct musb *musb = platform_get_drvdata(glue->musb);
+ struct musb *musb = glue->musb;
unsigned long flags;
u8 devctl;
@@ -112,7 +113,7 @@ static void sunxi_musb_work(struct work_struct *work)
if (test_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags)) {
set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
musb->xceiv->otg->default_a = 1;
- musb->xceiv->otg->state = OTG_STATE_A_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
MUSB_HST_MODE(musb);
devctl |= MUSB_DEVCTL_SESSION;
} else {
@@ -145,10 +146,12 @@ static void sunxi_musb_set_vbus(struct musb *musb, int is_on)
{
struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
- if (is_on)
+ if (is_on) {
set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
- else
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+ } else {
clear_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
+ }
schedule_work(&glue->work);
}
@@ -264,15 +267,6 @@ static int sunxi_musb_init(struct musb *musb)
if (ret)
goto error_unregister_notifier;
- if (musb->port_mode == MUSB_PORT_MODE_HOST) {
- ret = phy_power_on(glue->phy);
- if (ret)
- goto error_phy_exit;
- set_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags);
- /* Stop musb work from turning vbus off again */
- set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
- }
-
musb->isr = sunxi_musb_interrupt;
/* Stop the musb-core from doing runtime pm (not supported on sunxi) */
@@ -280,8 +274,6 @@ static int sunxi_musb_init(struct musb *musb)
return 0;
-error_phy_exit:
- phy_exit(glue->phy);
error_unregister_notifier:
if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST,
@@ -323,10 +315,31 @@ static int sunxi_musb_exit(struct musb *musb)
return 0;
}
+static int sunxi_set_mode(struct musb *musb, u8 mode)
+{
+ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
+ int ret;
+
+ if (mode == MUSB_HOST) {
+ ret = phy_power_on(glue->phy);
+ if (ret)
+ return ret;
+
+ set_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags);
+ /* Stop musb work from turning vbus off again */
+ set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+ }
+
+ return 0;
+}
+
static void sunxi_musb_enable(struct musb *musb)
{
struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
+ glue->musb = musb;
+
/* musb_core does not call us in a balanced manner */
if (test_and_set_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags))
return;
@@ -569,6 +582,7 @@ static const struct musb_platform_ops sunxi_musb_ops = {
.exit = sunxi_musb_exit,
.enable = sunxi_musb_enable,
.disable = sunxi_musb_disable,
+ .set_mode = sunxi_set_mode,
.fifo_offset = sunxi_musb_fifo_offset,
.ep_offset = sunxi_musb_ep_offset,
.busctl_offset = sunxi_musb_busctl_offset,
@@ -721,9 +735,9 @@ static int sunxi_musb_probe(struct platform_device *pdev)
pinfo.data = &pdata;
pinfo.size_data = sizeof(pdata);
- glue->musb = platform_device_register_full(&pinfo);
- if (IS_ERR(glue->musb)) {
- ret = PTR_ERR(glue->musb);
+ glue->musb_pdev = platform_device_register_full(&pinfo);
+ if (IS_ERR(glue->musb_pdev)) {
+ ret = PTR_ERR(glue->musb_pdev);
dev_err(&pdev->dev, "Error registering musb dev: %d\n", ret);
goto err_unregister_usb_phy;
}
@@ -740,7 +754,7 @@ static int sunxi_musb_remove(struct platform_device *pdev)
struct sunxi_glue *glue = platform_get_drvdata(pdev);
struct platform_device *usb_phy = glue->usb_phy;
- platform_device_unregister(glue->musb); /* Frees glue ! */
+ platform_device_unregister(glue->musb_pdev);
usb_phy_generic_unregister(usb_phy);
return 0;
diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c
index 24e2b3cf1867..a72e8d670adc 100644
--- a/drivers/usb/phy/phy-twl6030-usb.c
+++ b/drivers/usb/phy/phy-twl6030-usb.c
@@ -97,6 +97,9 @@ struct twl6030_usb {
struct regulator *usb3v3;
+ /* used to check initial cable status after probe */
+ struct delayed_work get_status_work;
+
/* used to set vbus, in atomic path */
struct work_struct set_vbus_work;
@@ -227,12 +230,16 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
twl->asleep = 1;
status = MUSB_VBUS_VALID;
twl->linkstat = status;
- musb_mailbox(status);
+ ret = musb_mailbox(status);
+ if (ret)
+ twl->linkstat = MUSB_UNKNOWN;
} else {
if (twl->linkstat != MUSB_UNKNOWN) {
status = MUSB_VBUS_OFF;
twl->linkstat = status;
- musb_mailbox(status);
+ ret = musb_mailbox(status);
+ if (ret)
+ twl->linkstat = MUSB_UNKNOWN;
if (twl->asleep) {
regulator_disable(twl->usb3v3);
twl->asleep = 0;
@@ -264,7 +271,9 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
status = MUSB_ID_GROUND;
twl->linkstat = status;
- musb_mailbox(status);
+ ret = musb_mailbox(status);
+ if (ret)
+ twl->linkstat = MUSB_UNKNOWN;
} else {
twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR);
twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
@@ -274,6 +283,15 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
return IRQ_HANDLED;
}
+static void twl6030_status_work(struct work_struct *work)
+{
+ struct twl6030_usb *twl = container_of(work, struct twl6030_usb,
+ get_status_work.work);
+
+ twl6030_usb_irq(twl->irq2, twl);
+ twl6030_usbotg_irq(twl->irq1, twl);
+}
+
static int twl6030_enable_irq(struct twl6030_usb *twl)
{
twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
@@ -284,8 +302,6 @@ static int twl6030_enable_irq(struct twl6030_usb *twl)
REG_INT_MSK_LINE_C);
twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
REG_INT_MSK_STS_C);
- twl6030_usb_irq(twl->irq2, twl);
- twl6030_usbotg_irq(twl->irq1, twl);
return 0;
}
@@ -371,6 +387,7 @@ static int twl6030_usb_probe(struct platform_device *pdev)
dev_warn(&pdev->dev, "could not create sysfs file\n");
INIT_WORK(&twl->set_vbus_work, otg_set_vbus_work);
+ INIT_DELAYED_WORK(&twl->get_status_work, twl6030_status_work);
status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq,
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT,
@@ -395,6 +412,7 @@ static int twl6030_usb_probe(struct platform_device *pdev)
twl->asleep = 0;
twl6030_enable_irq(twl);
+ schedule_delayed_work(&twl->get_status_work, HZ);
dev_info(&pdev->dev, "Initialized TWL6030 USB module\n");
return 0;
@@ -404,6 +422,7 @@ static int twl6030_usb_remove(struct platform_device *pdev)
{
struct twl6030_usb *twl = platform_get_drvdata(pdev);
+ cancel_delayed_work(&twl->get_status_work);
twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
REG_INT_MSK_LINE_C);
twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 2eddbe538cda..5608af4a369d 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -2007,6 +2007,7 @@ static void mos7720_release(struct usb_serial *serial)
urblist_entry)
usb_unlink_urb(urbtrack->urb);
spin_unlock_irqrestore(&mos_parport->listlock, flags);
+ parport_del_port(mos_parport->pp);
kref_put(&mos_parport->ref_count, destroy_mos_parport);
}
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 4d49fce406e1..5ef014ba6ae8 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -836,6 +836,7 @@ static int uas_slave_configure(struct scsi_device *sdev)
if (devinfo->flags & US_FL_BROKEN_FUA)
sdev->broken_fua = 1;
+ scsi_change_queue_depth(sdev, devinfo->qdepth - 2);
return 0;
}
@@ -848,7 +849,6 @@ static struct scsi_host_template uas_host_template = {
.slave_configure = uas_slave_configure,
.eh_abort_handler = uas_eh_abort_handler,
.eh_bus_reset_handler = uas_eh_bus_reset_handler,
- .can_queue = MAX_CMNDS,
.this_id = -1,
.sg_tablesize = SG_NONE,
.skip_settle_delay = 1,
diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index fca51105974e..2e0450bec1b1 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -941,7 +941,7 @@ static void vhci_stop(struct usb_hcd *hcd)
static int vhci_get_frame_number(struct usb_hcd *hcd)
{
- pr_err("Not yet implemented\n");
+ dev_err_ratelimited(&hcd->self.root_hub->dev, "Not yet implemented\n");
return 0;
}
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 457651bf45b0..fefe8b06a63d 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -1034,6 +1034,8 @@ static inline int usb_gadget_activate(struct usb_gadget *gadget)
* @udc_name: A name of UDC this driver should be bound to. If udc_name is NULL,
* this driver will be bound to any available UDC.
* @pending: UDC core private data used for deferred probe of this driver.
+ * @match_existing_only: If udc is not found, return an error and don't add this
+ * gadget driver to list of pending driver
*
* Devices are disabled till a gadget driver successfully bind()s, which
* means the driver will handle setup() requests needed to enumerate (and
@@ -1097,6 +1099,7 @@ struct usb_gadget_driver {
char *udc_name;
struct list_head pending;
+ unsigned match_existing_only:1;
};
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index 0b3da40a525e..d315c8907869 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -142,10 +142,11 @@ enum musb_vbus_id_status {
};
#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
-void musb_mailbox(enum musb_vbus_id_status status);
+int musb_mailbox(enum musb_vbus_id_status status);
#else
-static inline void musb_mailbox(enum musb_vbus_id_status status)
+static inline int musb_mailbox(enum musb_vbus_id_status status)
{
+ return 0;
}
#endif