Merge tag 'qcom-arm64-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 DT additional updates for 5.9

For SC7180 this adds the necessary properties for blowing fuses in
qfprom, Coresight fixes, GPU interconnect votes and specifies max speed
for USB controller.

SM8150 and SM8250 gains Adreno SMMU, the graphics management unit and
the GPU nodes, to enable headless GPU usage.

SDM845 gains tracing support for deep idle, GPU bus bandwidth scaling
and DB845c gains the LT9611 HDMI bridge wired up.

MSM8994 gains SMD RPM and SCM support and a new dts for the Sony Xperia
Z5.

MSM8992 is refactored and modernized and gets support for SCM, SPMI,
BLSP2 UART and I2C nodes, PMU, RPM clock controller, PSCI and proper CPU
definitions. Support for the Xiaomi Libra and Microsoft Lumia 950 are
added.

* tag 'qcom-arm64-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (31 commits)
  arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree
  arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree
  arm64: dts: qcom: msm8992: Add RPMCC node
  arm64: dts: qcom: msm8992: Add PSCI support.
  arm64: dts: qcom: msm8992: Add PMU node
  arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes
  arm64: dts: qcom: msm8992: Add SPMI PMIC arbiter device
  arm64: dts: qcom: msm8992: Add a SCM node
  arm64: dts: qcom: msm8992: Add a proper CPU map
  arm64: dts: qcom: bullhead: Move UART pinctrl to SoC
  arm64: dts: qcom: bullhead: Add qcom,msm-id
  arm64: dts: qcom: msm8992: Fix SDHCI1
  arm64: dts: qcom: msm8992: Modernize the DTS style
  arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)
  arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead.
  arm64: dts: qcom: msm8994: Add support for SMD RPM
  arm64: dts: qcom: msm8992: Add a label to rpm-requests
  arm64: dts: qcom: msm8994: Add SCM node
  arm64: dts: qcom: sdm845-db845c: Add hdmi bridge nodes
  arm64: dts: qcom: add sm8250 GPU nodes
  ...

Link: https://lore.kernel.org/r/20200730052003.649940-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

17 files changed, 1820 insertions, 501 deletions

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index c98bafe03a96..d8f1466e6758 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -9,7 +9,10 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-longcheer-l8150.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-a3u-eur.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-a5u-eur.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-bullhead-rev-101.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-msft-lumia-talkman.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-xiaomi-libra.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-angler-rev-101.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-sony-xperia-kitakami-sumire.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-asus-novago-tp370ql.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-hp-envy-x2.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
index 32670d5afdd6..5969b5cfdc85 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
@@ -11,6 +11,7 @@
 	model = "LG Nexus 5X";
 	compatible = "lg,bullhead", "qcom,msm8992";
 	/* required for bootloader to select correct board */
+	qcom,msm-id = <251 0>, <252 0>;
 	qcom,board-id = <0xb64 0>;
 	qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
 
@@ -22,15 +23,6 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	soc {
-		serial@f991e000 {
-			status = "okay";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_uart2_default>;
-			pinctrl-1 = <&blsp1_uart2_sleep>;
-		};
-	};
-
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -47,4 +39,237 @@
 	};
 };
 
-#include "msm8994-smd-rpm.dtsi"
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&rpm_requests {
+	pm8994-regulators {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_l1-supply = <&pm8994_s1>;
+		vdd_l2_26_28-supply = <&pm8994_s3>;
+		vdd_l3_11-supply = <&pm8994_s3>;
+		vdd_l4_27_31-supply = <&pm8994_s3>;
+		vdd_l5_7-supply = <&pm8994_s3>;
+		vdd_l6_12_32-supply = <&pm8994_s5>;
+		vdd_l8_16_30-supply = <&vreg_vph_pwr>;
+		vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
+		vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
+		vdd_l14_15-supply = <&pm8994_s5>;
+		vdd_l17_29-supply = <&vreg_vph_pwr>;
+		vdd_l20_21-supply = <&vreg_vph_pwr>;
+		vdd_l25-supply = <&pm8994_s5>;
+		vdd_lvs1_2 = <&pm8994_s4>;
+
+		pm8994_s1: s1 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		pm8994_s2: s2 {
+			/* TODO */
+		};
+
+		pm8994_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8994_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			regulator-system-load = <325000>;
+		};
+
+		pm8994_s5: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pm8994_s7: s7 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l2: l2 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+
+		pm8994_l3: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8994_l5: l5 {
+			/* TODO */
+		};
+
+		pm8994_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l7: l7 {
+			/* TODO */
+		};
+
+		pm8994_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l11: l11 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8994_l14: l14 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l18: l18 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8994_l19: l19 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-allow-set-load;
+			regulator-system-load = <570000>;
+		};
+
+		pm8994_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8994_l22: l22 {
+			regulator-min-microvolt = <3100000>;
+			regulator-max-microvolt = <3100000>;
+		};
+
+		pm8994_l23: l23 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3150000>;
+		};
+
+		pm8994_l25: l25 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l26: l26 {
+			/* TODO: value from downstream
+			regulator-min-microvolt = <987500>;
+			fails to apply */
+		};
+
+		pm8994_l27: l27 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8994_l28: l28 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l29: l29 {
+			/* TODO: Unsupported voltage range.
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			qcom,init-voltage = <2800000>;
+			*/
+		};
+
+		pm8994_l30: l30 {
+			/* TODO: get this verified
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,init-voltage = <1800000>;
+			*/
+		};
+
+		pm8994_l31: l31 {
+			regulator-min-microvolt = <1262500>;
+			regulator-max-microvolt = <1262500>;
+		};
+
+		pm8994_l32: l32 {
+			/* TODO: get this verified
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,init-voltage = <1800000>;
+			*/
+		};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	mmc-hs400-1_8v;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts
new file mode 100644
index 000000000000..3cc01f02219d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "msm8992.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+	model = "Microsoft Lumia 950";
+	compatible = "microsoft,talkman", "qcom,msm8992";
+
+	/* Most Lumia 950 users use GRUB to load their kernels,
+	 * hence there is no need for msm-id and friends.
+	 */
+
+	/* This enables graphical output via bootloader-enabled display.
+	 * acpi=no is required due to WP platforms having ACPI support, but
+	 * only for Windows-based OSes.
+	 */
+	chosen {
+		bootargs = "earlycon=efifb console=efifb acpi=no";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	mmc-hs200-1_8v;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi
deleted file mode 100644
index c543c718c22d..000000000000
--- a/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
- */
-
-&msmgpio {
-	blsp1_uart2_default: blsp1_uart2_default {
-		pinmux {
-			function = "blsp_uart2";
-			pins = "gpio4", "gpio5";
-		};
-		pinconf {
-			pins = "gpio4", "gpio5";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	blsp1_uart2_sleep: blsp1_uart2_sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio4", "gpio5";
-		};
-		pinconf {
-			pins = "gpio4", "gpio5";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-
-	/* 0-3 for sdc1 4-6 for sdc2 */
-	/* Order of pins */
-	/* SDC1: CLK -> 0, CMD -> 1, DATA -> 2, RCLK -> 3 */
-	/* SDC2: CLK -> 4, CMD -> 5, DATA -> 6 */
-	sdc1_clk_on: clk-on {
-		pinconf {
-			pins = "sdc1_clk";
-			bias-disable = <0>; /* No pull */
-			drive-strength = <16>; /* 16mA */
-		};
-	};
-
-	sdc1_clk_off: clk-off {
-		pinconf {
-			pins = "sdc1_clk";
-			bias-disable = <0>; /* No pull */
-			drive-strength = <2>; /* 2mA */
-		};
-	};
-
-	sdc1_cmd_on: cmd-on {
-		pinconf {
-			pins = "sdc1_cmd";
-			bias-pull-up;
-			drive-strength = <8>;
-		};
-	};
-
-	sdc1_cmd_off: cmd-off {
-		pinconf {
-			pins = "sdc1_cmd";
-			bias-pull-up = <0x3>; /* same as 3.10 ?? */
-			drive-strength = <2>; /* 2mA */
-		};
-	};
-
-	sdc1_data_on: data-on {
-		pinconf {
-			pins = "sdc1_data";
-			bias-pull-up;
-			drive-strength = <8>; /* 8mA */
-		};
-	};
-
-	sdc1_data_off: data-off {
-		pinconf {
-			pins = "sdc1_data";
-			bias-pull-up;
-			drive-strength = <2>;
-		};
-	};
-
-	sdc1_rclk_on: rclk-on {
-		bias-pull-down; /* pull down */
-	};
-
-	sdc1_rclk_off: rclk-off {
-		bias-pull-down; /* pull down */
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
new file mode 100644
index 000000000000..4f64ca3ea1ef
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
@@ -0,0 +1,364 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "msm8992.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+	model = "Xiaomi Mi 4C";
+	compatible = "xiaomi,libra", "qcom,msm8992";
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <251 0 252 0>;
+	qcom,pmic-id = <65545 65546 0 0>;
+	qcom,board-id = <12 0>;
+
+	/* This enables graphical output via bootloader-enabled display */
+	chosen {
+		bootargs = "earlycon=tty0 console=tty0";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@3404000 {
+			status= "okay";
+			compatible = "simple-framebuffer";
+			reg = <0 0x3404000 0 (1080 * 1920 * 3)>;
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 3)>;
+			format = "r8g8b8";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		button@0 {
+			label = "Volume Up";
+			gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* This is for getting crash logs using Android downstream kernels */
+		ramoops@dfc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xdfc00000 0x0 0x40000>;
+			console-size = <0x10000>;
+			record-size = <0x10000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+		};
+
+		continuous_splash: framebuffer@3401000{
+			reg = <0x0 0x3401000 0x0 0x2200000>;
+			no-map;
+		};
+
+		dfps_data_mem: dfps_data_mem@3400000 {
+			reg = <0x0 0x3400000 0x0 0x1000>;
+			no-map;
+		};
+
+		peripheral_region: peripheral_region@7400000 {
+			reg = <0x0 0x7400000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		modem_region: modem_region@9000000 {
+			reg = <0x0 0x9000000 0x0 0x5a00000>;
+			no-map;
+		};
+
+		tzapp: modem_region@ea00000 {
+			reg = <0x0 0xea00000 0x0 0x1900000>;
+			no-map;
+		};
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	/* Atmel or Synaptics touchscreen */
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	/* Silabs si4705 FM transmitter */
+};
+
+&blsp_i2c6 {
+	status = "okay";
+
+	/* NCI NFC,
+	 * TI USB320 Type-C controller,
+	 * Pericom 30216a USB (de)mux switch
+	 */
+};
+
+&blsp_i2c7 {
+	status = "okay";
+
+	/* cm36686 proximity and ambient light sensor */
+};
+
+&blsp_i2c13 {
+	status = "okay";
+
+	/* ST lsm6db0 gyro/accelerometer */
+};
+
+&blsp2_uart2 {
+	status = "okay";
+};
+
+&rpm_requests {
+	pm8994-regulators {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_l1-supply = <&pm8994_s7>;
+		vdd_l2_26_28-supply = <&pm8994_s3>;
+		vdd_l3_11-supply = <&pm8994_s3>;
+		vdd_l4_27_31-supply = <&pm8994_s3>;
+		vdd_l5_7-supply = <&pm8994_s3>;
+		vdd_l6_12_32-supply = <&pm8994_s5>;
+		vdd_l8_16_30-supply = <&vreg_vph_pwr>;
+		vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
+		vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
+		vdd_l14_15-supply = <&pm8994_s5>;
+		vdd_l17_29-supply = <&vreg_vph_pwr>;
+		vdd_l20_21-supply = <&vreg_vph_pwr>;
+		vdd_l25-supply = <&pm8994_s5>;
+		vdd_lvs1_2 = <&pm8994_s4>;
+
+		pm8994_s1: s1 {
+			/* unused */
+			status = "disabled";
+		};
+
+		pm8994_s2: s2 {
+			/* unused */
+			status = "disabled";
+		};
+
+		pm8994_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8994_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+			regulator-system-load = <325000>;
+		};
+
+		pm8994_s5: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pm8994_s7: s7 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l2: l2 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+
+		pm8994_l3: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8994_l5: l5 {
+			/* unused */
+			status = "disabled";
+		};
+
+		pm8994_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l7: l7 {
+			/* unused */
+			status = "disabled";
+		};
+
+		pm8994_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l11: l11 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8994_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+		};
+
+		pm8994_l19: l19 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-allow-set-load;
+			regulator-system-load = <570000>;
+		};
+
+		pm8994_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+		};
+
+		pm8994_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8994_l23: l23 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3150000>;
+		};
+
+		pm8994_l25: l25 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l26: l26 {
+			regulator-min-microvolt = <987500>;
+			regulator-max-microvolt = <987500>;
+
+		};
+
+		pm8994_l27: l27 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8994_l28: l28 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l29: l29 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l30: l30 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l31: l31 {
+			regulator-min-microvolt = <1262500>;
+			regulator-max-microvolt = <1262500>;
+		};
+
+		pm8994_l32: l32 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	mmc-hs400-1_8v;
+	vmmc-supply = <&pm8994_l20>;
+	vqmmc-supply = <&pm8994_s4>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 2021795c99ad..188fff2095f1 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -6,10 +6,6 @@
 #include <dt-bindings/clock/qcom,gcc-msm8994.h>
 
 / {
-	model = "Qualcomm Technologies, Inc. MSM 8992";
-	compatible = "qcom,msm8992";
-	// msm-id needed by bootloader for selecting correct blob
-	qcom,msm-id = <251 0>, <252 0>;
 	interrupt-parent = <&intc>;
 
 	#address-cells = <2>;
@@ -20,55 +16,139 @@
 	cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&CPU0>;
-				};
-			};
-		};
 
 		CPU0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x0>;
 			next-level-cache = <&L2_0>;
+			enable-method = "psci";
 			L2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 			};
 		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x100>;
+			next-level-cache = <&L2_1>;
+			enable-method = "psci";
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x101>;
+			next-level-cache = <&L2_1>;
+			enable-method = "psci";
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+			};
+		};
 	};
 
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	clocks {
+		xo_board: xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8994", "qcom,scm";
+		};
 	};
 
-	xo_board: xo_board {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <19200000>;
+	memory {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0 0 0>;
 	};
 
-	sleep_clk: sleep_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
-	vreg_vph_pwr: vreg-vph-pwr {
-		compatible = "regulator-fixed";
-		status = "okay";
-		regulator-name = "vph-pwr";
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "hvc";
+	};
 
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
 
-		regulator-always-on;
+		smem_region: smem@6a00000 {
+			reg = <0x0 0x6a00000 0x0 0x200000>;
+			no-map;
+		};
 	};
 
 	sfpb_mutex: hwmutex {
@@ -98,9 +178,10 @@
 				<0xf9002000 0x1000>;
 		};
 
-		apcs: syscon@f900d000 {
-			compatible = "syscon";
+		apcs: mailbox@f900d000 {
+			compatible = "qcom,msm8994-apcs-kpss-global", "syscon";
 			reg = <0xf900d000 0x2000>;
+			#mbox-cells = <1>;
 		};
 
 		timer@f9020000 {
@@ -161,63 +242,147 @@
 			};
 		};
 
-		restart@fc4ab000 {
-			compatible = "qcom,pshold";
-			reg = <0xfc4ab000 0x4>;
-		};
+		sdhc_1: sdhci@f9824900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
+			reg-names = "hc_mem", "core_mem";
 
-		msmgpio: pinctrl@fd510000 {
-			compatible = "qcom,msm8994-pinctrl";
-			reg = <0xfd510000 0x4000>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			gpio-ranges = <&msmgpio 0 0 146>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+				<&gcc GCC_SDCC1_AHB_CLK>,
+				<&xo_board>;
+			clock-names = "core", "iface", "xo";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on
+					&sdc1_rclk_on>;
+			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off
+					&sdc1_rclk_off>;
+
+			regulator-always-on;
+			bus-width = <8>;
+			non-removable;
+
+			status = "disabled";
 		};
 
 		blsp1_uart2: serial@f991e000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf991e000 0x1000>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>;
-			status = "disabled";
 			clock-names = "core", "iface";
-			clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>,
-				<&clock_gcc GCC_BLSP1_AHB_CLK>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				<&gcc GCC_BLSP1_AHB_CLK>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			pinctrl-1 = <&blsp1_uart2_sleep>;
+			status = "disabled";
 		};
 
-		clock_gcc: clock-controller@fc400000 {
-			compatible = "qcom,gcc-msm8994";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			reg = <0xfc400000 0x2000>;
+		blsp_i2c2: i2c@f9924000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9924000 0x500>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <400000>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_default>;
+			pinctrl-1 = <&i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
 		};
 
-		sdhci1: mmc@f9824900 {
-			compatible = "qcom,sdhci-msm-v4";
-			reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
-			reg-names = "hc_mem", "core_mem";
+		/* Somebody was very creative with their numbering scheme downstream... */
 
-			interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>,
-					<GIC_SPI 138 IRQ_TYPE_NONE>;
-			interrupt-names = "hc_irq", "pwr_irq";
+		blsp_i2c13: i2c@f9927000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9927000 0x500>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <400000>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c13_default>;
+			pinctrl-1 = <&i2c13_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c6: i2c@f9928000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9928000 0x500>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <400000>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c6_default>;
+			pinctrl-1 = <&i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
 
-			clocks = <&clock_gcc GCC_SDCC1_APPS_CLK>,
-				<&clock_gcc GCC_SDCC1_AHB_CLK>;
+		blsp2_uart2: serial@f995e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf995e000 0x1000>;
+			interrupt = <GIC_SPI 146 IRQ_TYPE_LEVEL_LOW>;
 			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
+				<&gcc GCC_BLSP2_AHB_CLK>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart2_default>;
+			pinctrl-1 = <&blsp2_uart2_sleep>;
+			status = "disabled";
+		};
 
+		blsp_i2c7: i2c@f9963000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9963000 0x500>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+				<&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <400000>;
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on
-					&sdc1_rclk_on>;
-			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off
-					&sdc1_rclk_off>;
+			pinctrl-0 = <&i2c7_default>;
+			pinctrl-1 = <&i2c7_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
 
-			regulator-always-on;
-			bus-width = <8>;
-			mmc-hs400-1_8v;
-			status = "okay";
+		blsp_i2c5: i2c@f9967000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9967000 0x500>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+				<&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <100000>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c5_default>;
+			pinctrl-1 = <&i2c5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gcc: clock-controller@fc400000 {
+			compatible = "qcom,gcc-msm8994";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0xfc400000 0x2000>;
 		};
 
 		rpm_msg_ram: memory@fc428000 {
@@ -225,27 +390,189 @@
 			reg = <0xfc428000 0x4000>;
 		};
 
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+
+		spmi_bus: spmi@fc4c0000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0xfc4cf000 0x1000>,
+			      <0xfc4cb000 0x1000>,
+			      <0xfc4ca000 0x1000>;
+			reg-names = "core", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
 		sfpb_mutex_regs: syscon@fd484000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "syscon";
 			reg = <0xfd484000 0x400>;
 		};
-	};
 
-	memory {
-		device_type = "memory";
-		reg = <0 0 0 0>; // bootloader will update
-	};
+		tlmm: pinctrl@fd510000 {
+			compatible = "qcom,msm8994-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 146>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
+			blsp1_uart2_default: blsp1-uart2-default {
+				function = "blsp_uart2";
+				pins = "gpio4", "gpio5";
+				drive-strength = <16>;
+				bias-disable;
+			};
 
-		smem_region: smem@6a00000 {
-			reg = <0x0 0x6a00000 0x0 0x200000>;
-			no-map;
+			blsp1_uart2_sleep: blsp1-uart2-sleep {
+				function = "gpio";
+				pins = "gpio4", "gpio5";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp2_uart2_default: blsp2-uart2-default {
+				function = "blsp_uart8";
+				pins = "gpio45", "gpio46", "gpio47", "gpio48";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp2_uart2_sleep: blsp2-uart2-sleep {
+				function = "gpio";
+				pins = "gpio45", "gpio46", "gpio47", "gpio48";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			sdc1_clk_on: clk-on {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <6>;
+			};
+
+			sdc1_clk_off: clk-off {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <2>;
+			};
+
+			sdc1_cmd_on: cmd-on {
+				pins = "sdc1_cmd";
+				bias-pull-up;
+				drive-strength = <6>;
+			};
+
+			sdc1_cmd_off: cmd-off {
+				pins = "sdc1_cmd";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc1_data_on: data-on {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <6>;
+			};
+
+			sdc1_data_off: data-off {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc1_rclk_on: rclk-on {
+				pins = "sdc1_rclk";
+				bias-pull-down;
+			};
+
+			sdc1_rclk_off: rclk-off {
+				pins = "sdc1_rclk";
+				bias-pull-down;
+			};
+
+			i2c2_default: i2c2-default {
+				function = "blsp_i2c2";
+				pins = "gpio6", "gpio7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c2_sleep: i2c2-sleep {
+				function = "gpio";
+				pins = "gpio6", "gpio7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c5_default: i2c5-default {
+				/* Don't be fooled! Nobody knows the reason why though... */
+				function = "blsp_i2c11";
+				pins = "gpio83", "gpio84";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c5_sleep: i2c5-sleep {
+				function = "gpio";
+				pins = "gpio83", "gpio84";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c6_default: i2c6-default {
+				function = "blsp_i2c6";
+				pins = "gpio28", "gpio27";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c6_sleep: i2c6-sleep {
+				function = "gpio";
+				pins = "gpio28", "gpio27";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c7_default: i2c7-default {
+				function = "blsp_i2c7";
+				pins = "gpio43", "gpio44";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c7_sleep: i2c7-sleep {
+				function = "gpio";
+				pins = "gpio43", "gpio44";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c13_default: i2c13-default {
+				/* Not a typo either. */
+				function = "blsp_i2c5";
+				pins = "gpio23", "gpio24";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c13_sleep: i2c13-sleep {
+				function = "gpio";
+				pins = "gpio23", "gpio24";
+				drive-strength = <2>;
+				bias-disable;
+			};
 		};
 	};
 
@@ -258,58 +585,35 @@
 			qcom,local-pid = <0>;
 			qcom,remote-pid = <6>;
 
-			rpm-requests {
+			rpm_requests: rpm-requests {
 				compatible = "qcom,rpm-msm8994";
 				qcom,smd-channels = "rpm_requests";
 
-				pm8994-regulators {
-					compatible = "qcom,rpm-pm8994-regulators";
-
-					pm8994_s1: s1 {};
-					pm8994_s2: s2 {};
-					pm8994_s3: s3 {};
-					pm8994_s4: s4 {};
-					pm8994_s5: s5 {};
-					pm8994_s6: s6 {};
-					pm8994_s7: s7 {};
-
-					pm8994_l1: l1 {};
-					pm8994_l2: l2 {};
-					pm8994_l3: l3 {};
-					pm8994_l4: l4 {};
-					pm8994_l6: l6 {};
-					pm8994_l8: l8 {};
-					pm8994_l9: l9 {};
-					pm8994_l10: l10 {};
-					pm8994_l11: l11 {};
-					pm8994_l12: l12 {};
-					pm8994_l13: l13 {};
-					pm8994_l14: l14 {};
-					pm8994_l15: l15 {};
-					pm8994_l16: l16 {};
-					pm8994_l17: l17 {};
-					pm8994_l18: l18 {};
-					pm8994_l19: l19 {};
-					pm8994_l20: l20 {};
-					pm8994_l21: l21 {};
-					pm8994_l22: l22 {};
-					pm8994_l23: l23 {};
-					pm8994_l24: l24 {};
-					pm8994_l25: l25 {};
-					pm8994_l26: l26 {};
-					pm8994_l27: l27 {};
-					pm8994_l28: l28 {};
-					pm8994_l29: l29 {};
-					pm8994_l30: l30 {};
-					pm8994_l31: l31 {};
-					pm8994_l32: l32 {};
-
-					pm8994_lvs1: lvs1 {};
-					pm8994_lvs2: lvs2 {};
+				rpmcc: rpmcc {
+					compatible = "qcom,rpmcc-msm8992";
+					#clock-cells = <1>;
 				};
 			};
 		};
 	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		status = "okay";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
-#include "msm8992-pins.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi b/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
deleted file mode 100644
index 31e3eb6ab515..000000000000
--- a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
+++ /dev/null
@@ -1,268 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2015, LGE Inc. All rights reserved.
- * Copyright (c) 2016, The Linux Foundation. All rights reserved.
- */
-
-&smd_rpm {
-	rpm {
-		rpm_requests {
-			pm8994-regulators {
-
-				vdd_l1-supply = <&pm8994_s1>;
-				vdd_l2_26_28-supply = <&pm8994_s3>;
-				vdd_l3_11-supply = <&pm8994_s3>;
-				vdd_l4_27_31-supply = <&pm8994_s3>;
-				vdd_l5_7-supply = <&pm8994_s3>;
-				vdd_l6_12_32-supply = <&pm8994_s5>;
-				vdd_l8_16_30-supply = <&vreg_vph_pwr>;
-				vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
-				vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
-				vdd_l14_15-supply = <&pm8994_s5>;
-				vdd_l17_29-supply = <&vreg_vph_pwr>;
-				vdd_l20_21-supply = <&vreg_vph_pwr>;
-				vdd_l25-supply = <&pm8994_s5>;
-				vdd_lvs1_2 = <&pm8994_s4>;
-
-				s1 {
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <800000>;
-				};
-
-				s2 {
-					/* TODO */
-				};
-
-				s3 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-				};
-
-				s4 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-allow-set-load;
-					regulator-system-load = <325000>;
-				};
-
-				s5 {
-					regulator-min-microvolt = <2150000>;
-					regulator-max-microvolt = <2150000>;
-				};
-
-				s7 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
-
-				l1 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
-
-				l2 {
-					regulator-min-microvolt = <1250000>;
-					regulator-max-microvolt = <1250000>;
-				};
-
-				l3 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				l4 {
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-				};
-
-				l5 {
-					/* TODO */
-				};
-
-				l6 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				l7 {
-					/* TODO */
-				};
-
-				l8 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				l9 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				l10 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-				};
-
-				l11 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					qcom,init-voltage = <1200000>;
-				};
-
-				l12 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-					proxy-supply = <&pm8994_l12>;
-					qcom,proxy-consumer-enable;
-					qcom,proxy-consumer-current = <10000>;
-					status = "okay";
-				};
-
-				l13 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2950000>;
-					qcom,init-voltage = <2950000>;
-					status = "okay";
-				};
-
-				l14 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					qcom,init-voltage = <1200000>;
-					proxy-supply = <&pm8994_l14>;
-					qcom,proxy-consumer-enable;
-					qcom,proxy-consumer-current = <10000>;
-					status = "okay";
-				};
-
-				l15 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-					status = "okay";
-				};
-
-				l16 {
-					regulator-min-microvolt = <2700000>;
-					regulator-max-microvolt = <2700000>;
-					qcom,init-voltage = <2700000>;
-					status = "okay";
-				};
-
-				l17 {
-					regulator-min-microvolt = <2700000>;
-					regulator-max-microvolt = <2700000>;
-					qcom,init-voltage = <2700000>;
-					status = "okay";
-				};
-
-				l18 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-					qcom,init-voltage = <3000000>;
-					qcom,init-ldo-mode = <1>;
-				};
-
-				l19 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-					status = "okay";
-				};
-
-				l20 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					regulator-always-on;
-					regulator-boot-on;
-					regulator-allow-set-load;
-					regulator-system-load = <570000>;
-				};
-
-				l21 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					qcom,init-voltage = <1800000>;
-				};
-
-				l22 {
-					regulator-min-microvolt = <3100000>;
-					regulator-max-microvolt = <3100000>;
-					qcom,init-voltage = <3100000>;
-				};
-
-				l23 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					qcom,init-voltage = <2800000>;
-				};
-
-				l24 {
-					regulator-min-microvolt = <3075000>;
-					regulator-max-microvolt = <3150000>;
-					qcom,init-voltage = <3075000>;
-				};
-
-				l25 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-				};
-
-				l26 {
-					/* TODO: value from downstream
-					regulator-min-microvolt = <987500>;
-					fails to apply */
-				};
-
-				l27 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					qcom,init-voltage = <1050000>;
-				};
-
-				l28 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					qcom,init-voltage = <1000000>;
-					proxy-supply = <&pm8994_l28>;
-					qcom,proxy-consumer-enable;
-					qcom,proxy-consumer-current = <10000>;
-				};
-
-				l29 {
-					/* TODO: Unsupported voltage range.
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					qcom,init-voltage = <2800000>;
-					*/
-				};
-
-				l30 {
-					/* TODO: get this verified
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-					*/
-				};
-
-				l31 {
-					regulator-min-microvolt = <1262500>;
-					regulator-max-microvolt = <1262500>;
-					qcom,init-voltage = <1262500>;
-				};
-
-				l32 {
-					/* TODO: get this verified
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-					*/
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts
new file mode 100644
index 000000000000..5d6bbbf6c119
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+	model = "Sony Xperia Z5";
+	compatible = "sony,sumire-row", "qcom,msm8994";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
new file mode 100644
index 000000000000..4032b7478f04
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+#include "msm8994.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <0xcf 0x20001>;
+	qcom,pmic-id = <0x10009 0x1000a 0x00 0x00>;
+	qcom,board-id = <8 0>;
+
+	/* Kitakami firmware doesn't support PSCI */
+	/delete-node/ psci;
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		button@0 {
+			label = "Volume Down";
+			gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		button@1 {
+			label = "Volume Up";
+			gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		button@2 {
+			label = "Camera Snapshot";
+			gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		button@3 {
+			label = "Camera Focus";
+			gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* This is for getting crash logs using Android downstream kernels */
+		ramoops@1fe00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x1fe00000 0x0 0x200000>;
+			console-size = <0x100000>;
+			record-size = <0x10000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x80000>;
+		};
+
+		continuous_splash: framebuffer@3401000{
+			reg = <0x0 0x3401000 0x0 0x2200000>;
+			no-map;
+		};
+
+		dfps_data_mem: dfps_data_mem@3400000 {
+			reg = <0x0 0x3400000 0x0 0x1000>;
+			no-map;
+		};
+
+		peripheral_region: peripheral_region@7400000 {
+			reg = <0x0 0x7400000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		modem_region: modem_region@9000000 {
+			reg = <0x0 0x9000000 0x0 0x5a00000>;
+			no-map;
+		};
+
+		tzapp: modem_region@ea00000 {
+			reg = <0x0 0xea00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		fb_region: fb_region@40000000 {
+			reg = <0x00 0x40000000 0x00 0x1000000>;
+			no-map;
+		};
+	};
+};
+
+&blsp_spi0 {
+	status = "okay";
+
+	/* FPC fingerprint reader */
+};
+
+/* I2C1 is disabled on this board */
+
+&blsp_i2c2 {
+	status = "okay";
+
+	/* NXP NFC */
+};
+
+&blsp_i2c4 {
+	status = "okay";
+
+	/* Empty but active */
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	/* SMB1357 charger and sii8620 HDMI/MHL bridge */
+};
+
+&blsp_i2c6 {
+	status = "okay";
+
+	/* Synaptics touchscreen */
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_uart2 {
+	status = "okay";
+};
+
+&rpm_requests {
+	pm8994_regulators: pm8994-regulators {
+		compatible = "qcom,rpm-pm8994-regulators";
+		vdd_l1-supply = <&pm8994_s1>;
+		vdd_l2_26_28-supply = <&pm8994_s3>;
+		vdd_l3_11-supply = <&pm8994_s3>;
+		vdd_l4_27_31-supply = <&pm8994_s3>;
+		vdd_l5_7-supply = <&pm8994_s3>;
+		vdd_l6_12_32-supply = <&pm8994_s5>;
+		vdd_l8_16_30-supply = <&vreg_vph_pwr>;
+		vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
+		vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
+		vdd_l14_15-supply = <&pm8994_s5>;
+		vdd_l17_29-supply = <&vreg_vph_pwr>;
+		vdd_l20_21-supply = <&vreg_vph_pwr>;
+		vdd_l25-supply = <&pm8994_s5>;
+		vdd_lvs1_2 = <&pm8994_s4>;
+
+		pm8994_s1: s1 {};
+		pm8994_s2: s2 {};
+		pm8994_s3: s3 {};
+		pm8994_s4: s4 {};
+		pm8994_s5: s5 {};
+		pm8994_s6: s6 {};
+		pm8994_s7: s7 {};
+
+		pm8994_l1: l1 {};
+		pm8994_l2: l2 {};
+		pm8994_l3: l3 {};
+		pm8994_l4: l4 {};
+		pm8994_l6: l6 {};
+		pm8994_l8: l8 {};
+		pm8994_l9: l9 {};
+		pm8994_l10: l10 {};
+		pm8994_l11: l11 {};
+		pm8994_l12: l12 {};
+		pm8994_l13: l13 {};
+		pm8994_l14: l14 {};
+		pm8994_l15: l15 {};
+		pm8994_l16: l16 {};
+		pm8994_l17: l17 {};
+		pm8994_l18: l18 {};
+		pm8994_l19: l19 {};
+		pm8994_l20: l20 {};
+		pm8994_l21: l21 {};
+		pm8994_l22: l22 {};
+		pm8994_l23: l23 {};
+		pm8994_l24: l24 {};
+		pm8994_l25: l25 {};
+		pm8994_l26: l26 {};
+		pm8994_l27: l27 {};
+		pm8994_l28: l28 {};
+		pm8994_l29: l29 {};
+		pm8994_l30: l30 {};
+		pm8994_l31: l31 {};
+		pm8994_l32: l32 {};
+
+		pm8994_lvs1: lvs1 {};
+		pm8994_lvs2: lvs2 {};
+	};
+
+	pmi8994_regulators: pmi8994-regulators {
+		compatible = "qcom,rpm-pmi8994-regulators";
+
+		pmi8994_s1: s1 {};
+		pmi8994_s2: s2 {};
+		pmi8994_s3: s3 {};
+		pmi8994_bby: boost-bypass {};
+	};
+};
+
+&sdhc1 {
+	status = "okay";
+
+	/* Downstream pushes 2.95V to the sdhci device,
+	 * but upstream driver REALLY wants to make vmmc 1.8v
+	 * cause of the hs400-1_8v mode. MMC works fine without
+	 * that regulator, so let's not use it for now.
+	 * vqmmc is also disabled cause driver stll complains.
+	 *
+	 * vmmc-supply = <&pm8994_l20>;
+	 * vqmmc-supply = <&pm8994_s4>;
+	 */
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index 1d1ae6f9ba1b..6707f898607f 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -142,6 +142,12 @@
 		};
 	};
 
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8994", "qcom,scm";
+		};
+	};
+
 	memory {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the reg */
@@ -169,9 +175,31 @@
 		};
 	};
 
+	smd {
+		compatible = "qcom,smd";
+		rpm {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+			qcom,local-pid = <0>;
+			qcom,remote-pid = <6>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8994";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: rpmcc {
+					compatible = "qcom,rpmcc-msm8994";
+					#clock-cells = <1>;
+				};
+			};
+		};
+	};
+
 	smem {
 		compatible = "qcom,smem";
 		memory-region = <&smem_mem>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
 		hwlocks = <&tcsr_mutex 3>;
 	};
 
@@ -190,6 +218,12 @@
 			      <0xf9002000 0x1000>;
 		};
 
+		apcs: mailbox@f900d000 {
+			compatible = "qcom,msm8994-apcs-kpss-global", "syscon";
+			reg = <0xf900d000 0x2000>;
+			#mbox-cells = <1>;
+		};
+
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -443,6 +477,11 @@
 			reg = <0xfc400000 0x2000>;
 		};
 
+		rpm_msg_ram: memory@fc428000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0xfc428000 0x4000>;
+		};
+
 		restart@fc4ab000 {
 			compatible = "qcom,pshold";
 			reg = <0xfc4ab000 0x4>;
@@ -660,5 +699,15 @@
 			     <GIC_PPI 4 0xff08>,
 			     <GIC_PPI 1 0xff08>;
 	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 26cc4913d3dd..d8b550723b32 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -288,6 +288,10 @@
 	};
 };
 
+&qfprom {
+	vcc-supply = <&vreg_l11a_1p8>;
+};
+
 &qspi {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 16df08d9ef8f..d46b3833e52f 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -658,9 +658,15 @@
 			#power-domain-cells = <1>;
 		};
 
-		qfprom@784000 {
+		qfprom: efuse@784000 {
 			compatible = "qcom,qfprom";
-			reg = <0 0x00784000 0 0x8ff>;
+			reg = <0 0x00784000 0 0x8ff>,
+			      <0 0x00780000 0 0x7a0>,
+			      <0 0x00782000 0 0x100>,
+			      <0 0x00786000 0 0x1fff>;
+
+			clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>;
+			clock-names = "core";
 			#address-cells = <1>;
 			#size-cells = <1>;
 
@@ -1880,42 +1886,52 @@
 			operating-points-v2 = <&gpu_opp_table>;
 			qcom,gmu = <&gmu>;
 
+			interconnects = <&gem_noc MASTER_GFX3D &mc_virt SLAVE_EBI1>;
+			interconnect-names = "gfx-mem";
+
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
 				opp-800000000 {
 					opp-hz = /bits/ 64 <800000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <8532000>;
 				};
 
 				opp-650000000 {
 					opp-hz = /bits/ 64 <650000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-peak-kBps = <7216000>;
 				};
 
 				opp-565000000 {
 					opp-hz = /bits/ 64 <565000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <5412000>;
 				};
 
 				opp-430000000 {
 					opp-hz = /bits/ 64 <430000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <5412000>;
 				};
 
 				opp-355000000 {
 					opp-hz = /bits/ 64 <355000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <3072000>;
 				};
 
 				opp-267000000 {
 					opp-hz = /bits/ 64 <267000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <3072000>;
 				};
 
 				opp-180000000 {
 					opp-hz = /bits/ 64 <180000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					opp-peak-kBps = <1804000>;
 				};
 			};
 		};
@@ -2121,6 +2137,7 @@
 		etr@6048000 {
 			compatible = "arm,coresight-tmc", "arm,primecell";
 			reg = <0 0x06048000 0 0x1000>;
+			iommus = <&apps_smmu 0x04a0 0x20>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -2193,6 +2210,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			qcom,replicator-loses-context;
 
 			out-ports {
 				port {
@@ -2220,6 +2238,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -2239,6 +2258,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -2258,6 +2278,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -2277,6 +2298,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -2296,6 +2318,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -2315,6 +2338,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -2334,6 +2358,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -2353,6 +2378,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -2656,6 +2682,7 @@
 				snps,dis_enblslpm_quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
 				phy-names = "usb2-phy", "usb3-phy";
+				maximum-speed = "super-speed";
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index c00797bd3b07..a2a98680ccf5 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -74,6 +74,17 @@
 		};
 	};
 
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
 	lt9611_1v8: lt9611-vdd18-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "LT9611_1V8";
@@ -382,6 +393,25 @@
 	firmware-name = "qcom/sdm845/cdsp.mdt";
 };
 
+&dsi0 {
+	status = "okay";
+	vdda-supply = <&vreg_l26a_1p2>;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_a>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vreg_l1a_0p875>;
+};
+
 &gcc {
 	protected-clocks = <GCC_QSPI_CORE_CLK>,
 			   <GCC_QSPI_CORE_CLK_SRC>,
@@ -395,6 +425,48 @@
 	};
 };
 
+&i2c10 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	lt9611_codec: hdmi-bridge@3b {
+		compatible = "lontium,lt9611";
+		reg = <0x3b>;
+		#sound-dai-cells = <1>;
+
+		interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&lt9611_1v8>;
+		vcc-supply = <&lt9611_3v3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lt9611_irq_pin>, <&dsi_sw_sel>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+		};
+	};
+};
+
 &i2c11 {
 	/* On Low speed expansion */
 	label = "LS-I2C1";
@@ -407,6 +479,14 @@
 	status = "okay";
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_mdp {
+	status = "okay";
+};
+
 &mss_pil {
 	status = "okay";
 	firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
@@ -612,6 +692,21 @@
 		};
 	};
 
+	hdmi-dai-link {
+		link-name = "HDMI Playback";
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai =  <&lt9611_codec 0>;
+		};
+	};
+
 	slim-dai-link {
 		link-name = "SLIM Playback";
 		cpu {
@@ -686,6 +781,21 @@
 		};
 	};
 
+	dsi_sw_sel: dsi-sw-sel {
+		pins = "gpio120";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	lt9611_irq_pin: lt9611-irq {
+		pins = "gpio84";
+		function = "gpio";
+		bias-disable;
+	};
+
 	pcie0_default_state: pcie0-default {
 		clkreq {
 			pins = "gpio36";
@@ -943,6 +1053,14 @@
 	};
 };
 
+&qup_i2c10_default {
+	pinconf {
+		pins = "gpio55", "gpio56";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
 &qup_uart6_default {
 	pinmux {
 		pins = "gpio45", "gpio46", "gpio47", "gpio48";
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index e506793407d8..2884577dcb77 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3016,6 +3016,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -3035,6 +3036,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -3054,6 +3056,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -3073,6 +3076,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -3092,6 +3096,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -3111,6 +3116,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -3130,6 +3136,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -3149,6 +3156,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -3999,42 +4007,52 @@
 
 			qcom,gmu = <&gmu>;
 
+			interconnects = <&mem_noc MASTER_GFX3D &mem_noc SLAVE_EBI1>;
+			interconnect-names = "gfx-mem";
+
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
 				opp-710000000 {
 					opp-hz = /bits/ 64 <710000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <7216000>;
 				};
 
 				opp-675000000 {
 					opp-hz = /bits/ 64 <675000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <7216000>;
 				};
 
 				opp-596000000 {
 					opp-hz = /bits/ 64 <596000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-peak-kBps = <6220000>;
 				};
 
 				opp-520000000 {
 					opp-hz = /bits/ 64 <520000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <6220000>;
 				};
 
 				opp-414000000 {
 					opp-hz = /bits/ 64 <414000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <4068000>;
 				};
 
 				opp-342000000 {
 					opp-hz = /bits/ 64 <342000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <2724000>;
 				};
 
 				opp-257000000 {
 					opp-hz = /bits/ 64 <257000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <1648000>;
 				};
 			};
 		};
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 7a0c5b419ff0..b86a7ead3006 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -547,6 +547,141 @@
 			};
 		};
 
+		gpu: gpu@2c00000 {
+			/*
+			 * note: the amd,imageon compatible makes it possible
+			 * to use the drm/msm driver without the display node,
+			 * make sure to remove it when display node is added
+			 */
+			compatible = "qcom,adreno-640.1",
+				     "qcom,adreno",
+				     "amd,imageon";
+			#stream-id-cells = <16>;
+
+			reg = <0 0x02c00000 0 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x401>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			zap-shader {
+				memory-region = <&gpu_mem>;
+			};
+
+			/* note: downstream checks gpu binning for 675 Mhz */
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-675000000 {
+					opp-hz = /bits/ 64 <675000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+				};
+
+				opp-585000000 {
+					opp-hz = /bits/ 64 <585000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+				};
+
+				opp-499200000 {
+					opp-hz = /bits/ 64 <499200000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+				};
+
+				opp-427000000 {
+					opp-hz = /bits/ 64 <427000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-345000000 {
+					opp-hz = /bits/ 64 <345000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-257000000 {
+					opp-hz = /bits/ 64 <257000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
+		gmu: gmu@2c6a000 {
+			compatible="qcom,adreno-gmu-640.1", "qcom,adreno-gmu";
+
+			reg = <0 0x02c6a000 0 0x30000>,
+			      <0 0x0b290000 0 0x10000>,
+			      <0 0x0b490000 0 0x10000>;
+			reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc 0>,
+				 <&gpucc 3>,
+				 <&gpucc 6>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "ahb", "gmu", "cxo", "axi", "memnoc";
+
+			power-domains = <&gpucc 0>,
+					<&gpucc 1>;
+			power-domain-names = "cx", "gx";
+
+			iommus = <&adreno_smmu 5 0x400>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@2c90000 {
+			compatible = "qcom,sm8150-gpucc";
+			reg = <0 0x02c90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@2ca0000 {
+			compatible = "qcom,sm8150-smmu-500", "arm,mmu-500";
+			reg = <0 0x02ca0000 0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc 0>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+			clock-names = "ahb", "bus", "iface";
+
+			power-domains = <&gpucc 0>;
+		};
+
 		tlmm: pinctrl@3100000 {
 			compatible = "qcom,sm8150-pinctrl";
 			reg = <0x0 0x03100000 0x0 0x300000>,
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 551a3cef356e..377172e8967b 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1047,6 +1047,148 @@
 			#hwlock-cells = <1>;
 		};
 
+		gpu: gpu@3d00000 {
+			/*
+			 * note: the amd,imageon compatible makes it possible
+			 * to use the drm/msm driver without the display node,
+			 * make sure to remove it when display node is added
+			 */
+			compatible = "qcom,adreno-650.2",
+				     "qcom,adreno",
+				     "amd,imageon";
+			#stream-id-cells = <16>;
+
+			reg = <0 0x03d00000 0 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x401>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			zap-shader {
+				memory-region = <&gpu_mem>;
+			};
+
+			/* note: downstream checks gpu binning for 670 Mhz */
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-670000000 {
+					opp-hz = /bits/ 64 <670000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+				};
+
+				opp-587000000 {
+					opp-hz = /bits/ 64 <587000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+				};
+
+				opp-525000000 {
+					opp-hz = /bits/ 64 <525000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+				};
+
+				opp-490000000 {
+					opp-hz = /bits/ 64 <490000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-441600000 {
+					opp-hz = /bits/ 64 <441600000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+				};
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-305000000 {
+					opp-hz = /bits/ 64 <305000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible="qcom,adreno-gmu-650.2", "qcom,adreno-gmu";
+
+			reg = <0 0x03d6a000 0 0x30000>,
+			      <0 0x3de0000 0 0x10000>,
+			      <0 0xb290000 0 0x10000>,
+			      <0 0xb490000 0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc", "gmu_pdc_seq";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc 0>,
+				 <&gpucc 3>,
+				 <&gpucc 6>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "ahb", "gmu", "cxo", "axi", "memnoc";
+
+			power-domains = <&gpucc 0>,
+					<&gpucc 1>;
+			power-domain-names = "cx", "gx";
+
+			iommus = <&adreno_smmu 5 0x400>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm8250-gpucc";
+			reg = <0 0x03d90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sm8250-smmu-500", "arm,mmu-500";
+			reg = <0 0x03da0000 0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc 0>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+			clock-names = "ahb", "bus", "iface";
+
+			power-domains = <&gpucc 0>;
+		};
+
 		slpi: remoteproc@5c00000 {
 			compatible = "qcom,sm8250-slpi-pas";
 			reg = <0 0x05c00000 0 0x4000>;
diff --git a/include/dt-bindings/power/qcom-rpmpd.h b/include/dt-bindings/power/qcom-rpmpd.h
index dc146e44228b..5e61eaf73bdd 100644
--- a/include/dt-bindings/power/qcom-rpmpd.h
+++ b/include/dt-bindings/power/qcom-rpmpd.h
@@ -55,6 +55,7 @@
 #define RPMH_REGULATOR_LEVEL_MIN_SVS	48
 #define RPMH_REGULATOR_LEVEL_LOW_SVS	64
 #define RPMH_REGULATOR_LEVEL_SVS	128
+#define RPMH_REGULATOR_LEVEL_SVS_L0	144
 #define RPMH_REGULATOR_LEVEL_SVS_L1	192
 #define RPMH_REGULATOR_LEVEL_SVS_L2	224
 #define RPMH_REGULATOR_LEVEL_NOM	256